<- Ranking
Summary
Task
jq-static
Model
gpt-oss-120b-high logo
gpt-oss-120b-high
Status
Failed
Performance
Cost$0.087
Total elapsed time3m35s
LLM inference time1m23s
Command execution time2m12s
Commands executed31
All details >
Attempt ID zya54fos30c5v Attempt group run-16-09-22-05
Revision fb5c74bd2fee AWS Instance m8i.2xlarge
Start time 2025-09-16T21:53:51.973Z End time 2025-09-16T21:57:27.139Z
Task jq-static Environment ubuntu-22.04-amd64-offline
Model gpt-oss-120b-high logo gpt-oss-120b-high OpenRouter slug openai/gpt-oss-120b
Temperature 1 Explicit prompt caching false
User msg after tool call false Max tool calls 50
Total timeout seconds 900 Single command timeout 600
Cost $0.087 Duration 3m35s
LLM inference time 1m23s Command execution time 2m12s
Final context tokens 37,148 Total output tokens 10,528
Output reasoning tokens 8,281 Messages 65
Assistant messages 32 User messages 1
System messages 1 Commands executed 31
Download full attempt result JSON
Task
Task: jq-static

jq 1.8.1 is a command-line JSON utility for viewing and transforming JSON.
Project link: github.com/jqlang/jq

Task:
Compile and install statically-linked jq to a specific location.

Difficulties:
Static linking requires correctly configuring the build.

Environment:
Ubuntu 22.04 on amd64, without internet access.

View task page
Execution log
SYSTEM

You are a package-building specialist operating a Ubuntu 22.04 bash shell via one tool: run_terminal_cmd.
The current working directory of every run_terminal_cmd is /home/peter.
Execution rules:
- Always pass non-interactive flags for any command that could prompt (e.g., -y, --yes, DEBIAN_FRONTEND=noninteractive).
- Don't include any newlines in the command.
- The environment is offline, assume you have all the necessary tools already installed.
If you encounter any errors or issues while doing the user's request, you must fix them and continue the task.
At the end verify you did the user request correctly.

USER

You are given a jq v1.8.1 source code at /home/peter/jq.tar.gz. Please compile the jq package and install it to /home/peter/result. Create a symlink from /home/peter/result/jq to the compiled jq binary. The binary should be statically linked.

ASSISTANT
Show reasoning

We need to compile jq v1.8.1 from source tarball, produce static binary, install to /home/peter/result, symlink /home/peter/result/jq to binary.

We need to extract tar.gz, configure with static linking flags, compile, install to target directory.

We need to ensure static linking: jq uses oniguruma, libtool, etc. Usually static linking requires building with --disable-shared and linking static libs. Might need to set LDFLAGS="-static". Also need to have static libraries for dependencies (like libonig, libtool, etc). In offline environment, maybe static libs are present. We'll try.

Steps:

1. Create result directory.
2. Extract tar.gz.
3. cd into source directory (likely jq-1.8.1).
4. Run ./configure with prefix=/home/peter/result, LDFLAGS="-static", maybe CFLAGS="-static". Also maybe need to disable shared libs: --disable-shared.
5. make -j$(nproc)
6. make install
7. Ensure binary at /home/peter/result/bin/jq (or maybe just /home/peter/result/jq?). We'll create symlink: ln -s /home/peter/result/bin/jq /home/peter/result/jq (or if binary directly installed there). We'll check.

Let's execute commands step by step, checking errors.

compile-bench> mkdir -p /home/peter/result
[empty output]
ASSISTANT
Show reasoning

We need to compile jq v1.8.1 from source tar.gz, statically linked, install to /home/peter/result, symlink.

Steps: extract tar.gz, configure with static linking flags, maybe use ./configure --disable-shared? For static linking, need to pass LDFLAGS="-static". Also need to ensure dependencies like onig, libonig, etc. But offline environment may have static libs installed. We'll try.

Commands:

1. tar -xf /home/peter/jq.tar.gz -C /home/peter
2. cd into extracted directory (likely jq-1.8.1)
3. Run ./configure --disable-shared LDFLAGS="-static" CFLAGS="-static" maybe also --enable-static. Use make -j$(nproc).
4. Then copy binary to /home/peter/result and symlink.

Let's list files.

compile-bench> ls -1 /home/peter
jq.tar.gz
result
↓ 3 lines
ASSISTANT
Show reasoning

We need to compile jq v1.8.1 from source tarball, statically linked, install to /home/peter/result, symlink /home/peter/result/jq to binary.

We need to extract tar.gz, configure with static linking flags, compile, install to prefix /home/peter/result maybe. Ensure static linking: use LDFLAGS="-static". Also need to ensure dependencies like on Ubuntu: need libonig? Actually jq uses libonig? It uses libonig for regex? Might need to compile with -static and maybe use -lm -lreadline? But static linking may require static libs for dependencies. However offline environment may have static libs installed. We'll try.

Steps:
- Extract tar.gz: tar -xf jq.tar.gz
- cd into directory (likely jq-1.8.1)
- Run ./configure --disable-shared --enable-static --prefix=/home/peter/result (maybe also LDFLAGS="-static")
- make -j$(nproc)
- make install
- Then create symlink: ln -s /home/peter/result/bin/jq /home/peter/result/jq

Check binary location after install. Usually make install puts binary in $prefix/bin.

Let's execute.

compile-bench> tar -xf /home/peter/jq.tar.gz -C /home/peter
[empty output]
ASSISTANT
Show reasoning

We need to compile jq v1.8.1 statically. Need to install dependencies: build-essential, autoconf, libtool, etc. Also need to configure with static linking flags. Usually jq uses libonig, libjq? Actually jq depends on libonig and maybe libtool. For static linking, we can use ./configure LDFLAGS="-static". Also need to ensure static libs for dependencies are present (e.g., libonig). Might need to install libonig-dev (static). In offline environment, assume they are present. We'll try.

First find extracted directory name. List.

compile-bench> ls -1 /home/peter
jq-1.8.1
jq.tar.gz
result
↓ 4 lines
ASSISTANT
Show reasoning

We need compile jq v1.8.1 statically linked. Need to install dependencies: on Ubuntu static linking may need libonig, libjq? But we need compile from source. Usually jq uses autoconf and libtool. Use ./configure with LDFLAGS="-static". Might need to install necessary dev packages: gcc, make, libtool, autoconf, automake, bison, flex, libtool, pkg-config, etc. Since offline environment, assume they are installed. Also to get static linking, may need to pass --disable-shared and possibly use static libs for onig and other libs. But jq uses its own onig? Actually jq uses libonig for regex. Might need to compile onig statically as well. But for simplicity, we can compile with "CC=gcc LDFLAGS='-static'" and maybe also add "-static-libgcc -static-libstdc++". However if dependencies not available statically, linking may fail. Could try "make -j$(nproc) LDFLAGS=-static". Let's try.

Navigate to source dir, run ./configure with appropriate flags. Use --disable-shared? Let's run.

compile-bench> cd /home/peter/jq-1.8.1 && ./configure --disable-shared LDFLAGS='-static' CFLAGS='-static'
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for wchar.h... yes
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking whether make supports nested variables... yes
checking dependency style of gcc... gcc3
checking whether make supports nested variables... (cached) yes
checking for ar... ar
checking the archiver (ar) interface... ar
checking whether to enable maintainer-specific portions of Makefiles... no
checking for gcc... (cached) gcc
checking whether the compiler supports GNU C... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to enable C11 features... (cached) none needed
checking whether gcc understands -c and -o together... (cached) yes
checking how to run the C preprocessor... gcc -E
checking for bison... no
checking for byacc... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking 
[command output truncated]
me lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... no
checking whether to build static libraries... yes
checking whether make sets $(MAKE)... (cached) yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking for sys/times.h... yes
checking size of int... 4
checking size of long... 8
checking size of long long... 8
checking size of void*... 8
checking for size_t... yes
checking for working alloca.h... yes
checking for alloca... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating test/Makefile
config.status: creating sample/Makefile
config.status: creating onig-config
config.status: creating src/config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default commands
↓ 133 lines
ASSISTANT
Show reasoning

We need to compile statically and install to /home/peter/result. After configure, run make with static linking. Then make install DESTDIR? Usually make install will install to /usr/local. We can use make install prefix=/home/peter/result. Also need symlink /home/peter/result/jq to binary.

Let's run make -j$(nproc).

compile-bench> cd /home/peter/jq-1.8.1 && make -j$(nproc) DEB_BUILD_OPTIONS=parallel=8
mkdir -p src
mkdir -p src
  GEN      src/builtin.inc
  GEN      src/config_opts.inc
mkdir -p src
  GEN      src/version.h
make  all-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making all in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making all in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make  all-am
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
/bin/bash ../libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c -o regparse.lo regparse.c
/bin/bash ../libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c -o regcomp.lo regcomp.c
/bin/bash ../libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c -o regexec.lo regexec.c
/bin/bash ../libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c -o regenc.lo regenc.c
/bin/bash ../libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c -o regerror.lo regerror.c
/bin/bash ../libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regext.lo -MD -MP -MF .deps/regext.Tpo -c -o regext.lo regext.c
/bin/bash ../libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c -o regsyntax.lo regsyntax.c
/bin/bash ../libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regtrav.lo -MD -MP -MF .deps/regtrav.Tpo -c -o regtrav.lo regtrav.c
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c regcomp.c -o regcomp.o
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c regparse.c -o regparse.o
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regext.lo -MD -MP -MF .deps/regext.Tpo -c regext.c -o regext.o
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regtrav.lo -MD -MP -MF .deps/regtrav.Tpo -c regtrav.c -o regtrav.o
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c regsyntax.c -o regsyntax.o
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c regexec.c -o regexec.o
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c regenc.c -o regenc.o
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c regerror.c -o regerror.o
mv -f .deps/regext.Tpo .deps/regext.Plo
mv -f .deps/regtrav.Tpo .deps/regtrav.Plo
/bin/bash ../libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H
[command output truncated]
utf32_be.lo utf32_le.lo euc_jp.lo euc_jp_prop.lo sjis.lo sjis_prop.lo iso8859_1.lo iso8859_2.lo iso8859_3.lo iso8859_4.lo iso8859_5.lo iso8859_6.lo iso8859_7.lo iso8859_8.lo iso8859_9.lo iso8859_10.lo iso8859_11.lo iso8859_13.lo iso8859_14.lo iso8859_15.lo iso8859_16.lo euc_tw.lo euc_kr.lo big5.lo gb18030.lo koi8_r.lo cp1251.lo onig_init.lo  
libtool: link: ar cr .libs/libonig.a  regparse.o regcomp.o regexec.o regenc.o regerror.o regext.o regsyntax.o regtrav.o regversion.o st.o reggnu.o unicode.o unicode_unfold_key.o unicode_fold1_key.o unicode_fold2_key.o unicode_fold3_key.o ascii.o utf8.o utf16_be.o utf16_le.o utf32_be.o utf32_le.o euc_jp.o euc_jp_prop.o sjis.o sjis_prop.o iso8859_1.o iso8859_2.o iso8859_3.o iso8859_4.o iso8859_5.o iso8859_6.o iso8859_7.o iso8859_8.o iso8859_9.o iso8859_10.o iso8859_11.o iso8859_13.o iso8859_14.o iso8859_15.o iso8859_16.o euc_tw.o euc_kr.o big5.o gb18030.o koi8_r.o cp1251.o onig_init.o
libtool: link: ranlib .libs/libonig.a
libtool: link: ( cd ".libs" && rm -f "libonig.la" && ln -s "../libonig.la" "libonig.la" )
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making all in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making all in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
sed -e 's,[@]datadir[@],/usr/local/share,g' -e 's,[@]datarootdir[@],/usr/local/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/usr/local,g' -e 's,[@]exec_prefix[@],/usr/local,g' -e 's,[@]libdir[@],/usr/local/lib,g' -e 's,[@]includedir[@],/usr/local/include,g' < ./oniguruma.pc.in > oniguruma.pc
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
  CC       src/builtin.lo
  CC       src/bytecode.lo
  CC       src/compile.lo
  CC       src/execute.lo
  CC       src/jq_test.lo
  CC       src/jv.lo
  CC       src/jv_alloc.lo
  CC       src/jv_aux.lo
  CC       src/jv_dtoa.lo
  CC       src/jv_file.lo
  CC       src/jv_parse.lo
  CC       src/jv_print.lo
  CC       src/jv_unicode.lo
  CC       src/linker.lo
  CC       src/locfile.lo
  CC       src/util.lo
  CC       src/jv_dtoa_tsd.lo
  CC       vendor/decNumber/decContext.lo
  CC       vendor/decNumber/decNumber.lo
  CC       src/lexer.lo
  CC       src/parser.lo
mkdir -p src
  GEN      src/version.h
  CC       src/main.o
  CCLD     libjq.la
  CCLD     jq
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 82 lines
ASSISTANT
Show reasoning

We have compiled jq, but need static linking. The configure used LDFLAGS='-static' and CFLAGS='-static', but the final binary may still be dynamically linked if libraries are not static. Let's check file type.

compile-bench> file /home/peter/jq-1.8.1/src/jq
/home/peter/jq-1.8.1/src/jq: cannot open `/home/peter/jq-1.8.1/src/jq' (No such file or directory)
ASSISTANT
Show reasoning

The binary likely is at ./src/jq (maybe after make it is in src/jq). Let's list src directory.

compile-bench> ls -l /home/peter/jq-1.8.1/src
total 1724
-rw-r--r-- 1 peter peter  64405 Jul  1 11:39 builtin.c
-rw-r--r-- 1 peter peter    428 Jul  1 11:39 builtin.h
-rw-r--r-- 1 peter peter  58334 Sep 16 21:54 builtin.inc
-rw-r--r-- 1 peter peter   9622 Jul  1 11:39 builtin.jq
-rw-r--r-- 1 peter peter    285 Sep 16 21:54 builtin.lo
-rw-r--r-- 1 peter peter 138704 Sep 16 21:54 builtin.o
-rw-r--r-- 1 peter peter   4740 Jul  1 11:39 bytecode.c
-rw-r--r-- 1 peter peter   1755 Jul  1 11:39 bytecode.h
-rw-r--r-- 1 peter peter    287 Sep 16 21:54 bytecode.lo
-rw-r--r-- 1 peter peter  10624 Sep 16 21:54 bytecode.o
-rw-r--r-- 1 peter peter  43926 Jul  1 11:39 compile.c
-rw-r--r-- 1 peter peter   3729 Jul  1 11:39 compile.h
-rw-r--r-- 1 peter peter    285 Sep 16 21:54 compile.lo
-rw-r--r-- 1 peter peter  61152 Sep 16 21:54 compile.o
-rw-r--r-- 1 peter peter     68 Sep 16 21:54 config_opts.inc
-rw-r--r-- 1 peter peter   3404 Jul  1 11:39 exec_stack.h
-rw-r--r-- 1 peter peter  36727 Jul  1 11:39 execute.c
-rw-r--r-- 1 peter peter    285 Sep 16 21:54 execute.lo
-rw-r--r-- 1 peter peter  50824 Sep 16 21:54 execute.o
-rw-r--r-- 1 peter peter   2858 Jul  1 11:39 inject_errors.c
-rw-r--r-- 1 peter peter   2550 Jul  1 11:39 jq.h
-rw-r--r-- 1 peter peter    208 Jul  1 11:39 jq_parser.h
-rw-r--r-- 1 peter peter  16187 Jul  1 11:39 jq_test.c
-rw-r--r-- 1 peter peter    285 Sep 16 21:54 jq_test.lo
-rw-r--r-- 1 peter peter  42048 Sep 16 21:54 jq_test.o
-rw-r--r-- 1 peter peter  54355 Jul  1 11:39 jv.c
-rw-r--r-- 1 peter peter  10680 Jul  1 11:39 jv.h
-rw-r--r-- 1 peter peter    275 Sep 16 21:54 jv.lo
-rw-r--r-- 1 peter peter  67480 Sep 16 21:54 jv.o
-rw-r--r-- 1 peter peter   4471 Jul  1 11:39 jv_alloc.c
-rw-r--r-- 1 peter peter    396 Jul  1 11:39 jv_alloc.h
-rw-r--r-- 1 peter peter    287 Sep 16 21:54 jv_alloc.lo
-rw-r--r-- 1 peter peter   6256 Sep 16 21:54 jv_alloc.o
-rw-r--r-- 1 peter peter  23332 Jul  1 11:39 jv_aux.c
-rw-r--r-- 1 peter peter    283 Sep 16 21:54 jv_aux.lo
-rw-r--r-- 1 peter peter  41368 Sep 16 21:54 jv_aux.o
-rw-r--r-- 1 peter peter  88819 Jul  1 11:39 jv_dtoa.c
-rw-r--r-- 1 peter peter    603 Jul  1 11:39 jv_dtoa.h
-rw-r--r-- 1 peter peter    285 Sep 16 21:54 jv_dtoa.lo
-rw-r--r-- 1 peter peter  28728 Sep 16 21:54 jv_dtoa.o
-rw-r--r-- 1 peter peter   1305 Jul  1 11:39 jv_dtoa_tsd.c
-rw-r--r-- 1 peter peter    100 Jul  1 11:39 jv_dtoa_tsd.h
-rw-r--r-- 1 peter peter    293 Sep 16 21:54 jv_dtoa_tsd.lo
-rw-r--r-- 1 peter peter   3344 Sep 16 21:54 jv_dtoa_tsd.o
-rw-r--r-- 1 peter peter   2373 Jul  1 11:39 jv_file.c
-rw-r--r-- 1 peter peter    285 Sep 16 21:54 jv_file.lo
-rw-r--r-- 1 peter peter   5224 Sep 16 21:54 jv_file.o
-rw-r--r-- 1 peter peter  27348 Jul  1 11:39 jv_parse.c
-rw-r--r-- 1 peter peter    287 Sep 16 21:54 jv_parse.lo
-rw-r--r-- 1 peter peter  32104 Sep 16 21:54 jv_parse.o
-rw-r--r-- 1 peter peter  12651 Jul  1 11:39 jv_print.c
-rw-r--r-- 1 peter peter    287 Sep 16 21:54 jv_print.lo
-rw-r--r-- 1 peter peter  16496 Sep 16 21:54 jv_print.o
-rw-r--r-- 1 peter peter    115 Jul  1 11:39 jv_private.h
-rw-r--r-- 1 peter peter   1782 Jul  1 11:39 jv_thread.h
-rw-r--r-- 1 peter peter   4722 Jul  1 11:39 jv_unicode.c
-rw-r--r-- 1 peter peter    447 Jul  1 11:39 jv_unicode.h
-rw-r--r-- 1 peter peter    291 Sep 16 21:54 jv_unicode.lo
-rw-r--r-- 1 peter peter   5376 Sep 16 21:54 jv_unicode.o
-rw-r--r-- 1 peter peter   3367 Jul  1 11:39 jv_utf8_tables.h
-rw-r--r-- 1 peter peter  73825 Jul  1 11:39 lexer.c
-rw-r--r-- 1 peter peter  16491 Jul  1 11:39 lexer.h
-rw-r--r-- 1 peter peter   4548 Jul  1 11:39 lexer.l
-rw-r--r-- 1 peter peter    281 Sep 16 21:54 lexer.lo
-rw-r--r-- 1 peter peter  34088 Sep 16 21:54 lexer.o
-rw-r--r-- 1 peter peter   3949 Jul  1 11:39 libm.h
-rw-r--r-- 1 peter peter  15432 Jul  1 11:39 linker.c
-rw-r--r-- 1 peter peter    161 Jul  1 11:39 linker.h
-rw-r--r-- 1 peter peter    283 Sep 16 21:54 linker.lo
-rw-r--r-- 1 peter peter  24376 Sep 16 21:54 linker.o
-rw-r--r-- 1 peter peter   2647 Jul  1 11:39 locfile.c
-rw-r--r-- 1 peter peter    578 Jul  1 11:39 locfile.h
-rw-r--r-- 1 peter peter    285 Sep 16 21:54 locfile.lo
-rw-r--r-- 1 peter peter   5960 Sep 16 21:54 locfile.o
-rw-r--r-- 1 peter peter  26718 Jul  1 11:39 main.c
-rw-r--r-- 1 peter peter  30168 Sep 16 21:54 main.o
-rw-r--r-- 1 peter peter   1242 Jul  1 11:39 opcode_list.h
-rw-r--r-- 1 peter peter 141968 Jul  1 11:39 parser.c
-rw-r--r-- 1 peter peter   6846 Jul  1 11:39 parser.h
-rw-r--r-- 1 peter peter    283 Sep 16 21:54 parser.lo
-rw-r--r-- 1 peter peter  68240 Sep 16 21:54 parser.o
-rw-r--r-- 1 peter peter  22678 Jul  1 11:39 parser.y
-rw-r--r-- 1 peter peter  37241 Jul  1 11:39 util.c
-rw-r--r-- 1 peter peter   1596 Jul  1 11:39 util.h
-rw-r--r-- 1 peter peter    279 Sep 16 21:54 util.lo
-rw-r--r-- 1 peter peter  13544 Sep 16 21:54 util.o
-rw-r--r-- 1 peter peter     27 Sep 16 21:54 version.h
↓ 89 lines
ASSISTANT
Show reasoning

We saw that make produced "jq" binary perhaps as src/jq? The make output shows "CCLD jq". Usually the binary is in src/jq. Let's check file location. Possibly src/jq is a symlink to .libs/jq? Let's list src directory for jq binary.

compile-bench> ls -l /home/peter/jq-1.8.1/src | grep jq
-rw-r--r-- 1 peter peter   9622 Jul  1 11:39 builtin.jq
-rw-r--r-- 1 peter peter   2550 Jul  1 11:39 jq.h
-rw-r--r-- 1 peter peter    208 Jul  1 11:39 jq_parser.h
-rw-r--r-- 1 peter peter  16187 Jul  1 11:39 jq_test.c
-rw-r--r-- 1 peter peter    285 Sep 16 21:54 jq_test.lo
-rw-r--r-- 1 peter peter  42048 Sep 16 21:54 jq_test.o
↓ 7 lines
ASSISTANT
Show reasoning

The binary likely is built as src/jq (executable). But we didn't see it. Maybe it's in src/.libs/jq or top-level? Let's search.

compile-bench> find /home/peter/jq-1.8.1 -type f -executable -name jq
/home/peter/jq-1.8.1/jq
ASSISTANT
Show reasoning

The binary is at /home/peter/jq-1.8.1/jq (not in src). Need to verify it's statically linked. Use file.

compile-bench> file /home/peter/jq-1.8.1/jq
/home/peter/jq-1.8.1/jq: ELF 64-bit LSB pie executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=50708b4ad4043d089468bb51d087cc8f7001cc4e, for GNU/Linux 3.2.0, not stripped
ASSISTANT
Show reasoning

We need a statically linked binary. The built jq is dynamically linked. Need to rebuild with static linking. The configure used LDFLAGS='-static' and CFLAGS='-static', but still got dynamic linking because maybe linking with libonig and other libs which are dynamic? Need to pass --disable-shared and maybe also set LIBS to static? Could try make clean then configure with additional flags: LDFLAGS='-static -static-libgcc -static-libstdc++' maybe also set LIBS='-lonig -lm -lrt -lpthread' but static linking of onig may be static already. However the resulting binary is PIE and dynamic. To force static, need to add -static to linking step. Perhaps need to set LDFLAGS='-static' and also disable libtool's default of building PIE? Could add --disable-dependency-tracking? Not sure.

Simpler: Use gcc -static -o jq-static src/*.o vendor/... but many objects. Could use make clean then make LDFLAGS="-static" maybe.

Let's try rebuilding with make clean then make LDFLAGS="-static".

compile-bench> cd /home/peter/jq-1.8.1 && make clean
Making clean in vendor/oniguruma
make[1]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making clean in src
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
test -z "libonig.la" || rm -f libonig.la
rm -f ./so_locations
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making clean in test
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
 rm -f test_utf8 test_syntax test_options testc testcu test_regset test_back
rm -rf .libs _libs
rm -f *.o
test -z "test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log" || rm -f test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log
test -z "test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs" || rm -f test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making clean in sample
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
 rm -f encode listcap names simple sql syntax user_property callout echo count bug_fix regset scan callback_each_match
rm -rf .libs _libs
rm -f *.o
test -z "encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log" || rm -f encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log
test -z "encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs" || rm -f encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Entering directory '/home/peter/jq-1.8.1'
 rm -f jq
test -z "src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1" || rm -f src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1
test -z "libjq.la " || rm -f libjq.la 
rm -f ./so_locations
rm -rf .libs _libs
rm -rf src/.libs src/_libs
rm -rf vendor/decNumber/.libs vendor/decNumber/_libs
rm -f *.o
rm -f src/*.o
rm -f src/*.lo
rm -f vendor/decNumber/*.o
rm -f vendor/decNumber/*.lo
test -z "tests/mantest.log tests/jqtest.log tests/shtest.log tests/utf8test.log tests/base64test.log tests/uritest.log tests/optionaltest.log tests/onigtest.log tests/manonigtest.log" || rm -f tests/mantest.log tests/jqtest.log tests/shtest.log tests/utf8test.log tests/base64test.log tests/uritest.log tests/optionaltest.log tests/onigtest.log tests/manonigtest.log
test -z "tests/mantest.trs tests/jqtest.trs tests/shtest.trs tests/utf8test.trs tests/base64test.trs tests/uritest.trs tests/optionaltest.trs tests/onigtest.trs tests/manonigtest.trs" || rm -f tests/mantest.trs tests/jqtest.trs tests/shtest.trs tests/utf8test.trs tests/base64test.trs tests/uritest.trs tests/optionaltest.trs tests/onigtest.trs tests/manonigtest.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 54 lines
ASSISTANT
Show reasoning

We need static binary. The binary we built earlier is dynamically linked (pie). We need to compile statically. We passed LDFLAGS='-static' and CFLAGS='-static' to configure, but resulting binary is still dynamically linked because maybe missing -static for linking the final executable. The configure may ignore LDFLAGS? The CFLAGS also not needed. Need to rebuild with appropriate flags. Usually for static binary: configure with --disable-shared and LDFLAGS='-static' maybe still builds dynamic due to linking to glibc static? On Ubuntu, building static glibc is problematic but possible with -static. Let's attempt to rebuild: clean then reconfigure with static linking for final binary: maybe using ./configure LDFLAGS="-static -static-libgcc" and also set LIBS="-lstdc++ -lm -lrt -lpthread"? But jq may need libonig which we built static already. Let's try:

make clean, then configure again with LDFLAGS='-static' and maybe LIBS='-static', then make. Then check file.

Proceed.

compile-bench> cd /home/peter/jq-1.8.1 && ./configure --disable-shared LDFLAGS='-static' CFLAGS='-static' && make -j$(nproc) DEB_BUILD_OPTIONS=parallel=8
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for wchar.h... yes
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking whether make supports nested variables... yes
checking dependency style of gcc... gcc3
checking whether make supports nested variables... (cached) yes
checking for ar... ar
checking the archiver (ar) interface... ar
checking whether to enable maintainer-specific portions of Makefiles... no
checking for gcc... (cached) gcc
checking whether the compiler supports GNU C... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to enable C11 features... (cached) none needed
checking whether gcc understands -c and -o together... (cached) yes
checking how to run the C preprocessor... gcc -E
checking for bison... no
checking for byacc... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking 
[command output truncated]
tf16_be.lo utf16_le.lo utf32_be.lo utf32_le.lo euc_jp.lo euc_jp_prop.lo sjis.lo sjis_prop.lo iso8859_1.lo iso8859_2.lo iso8859_3.lo iso8859_4.lo iso8859_5.lo iso8859_6.lo iso8859_7.lo iso8859_8.lo iso8859_9.lo iso8859_10.lo iso8859_11.lo iso8859_13.lo iso8859_14.lo iso8859_15.lo iso8859_16.lo euc_tw.lo euc_kr.lo big5.lo gb18030.lo koi8_r.lo cp1251.lo onig_init.lo  
libtool: link: ar cr .libs/libonig.a  regparse.o regcomp.o regexec.o regenc.o regerror.o regext.o regsyntax.o regtrav.o regversion.o st.o reggnu.o unicode.o unicode_unfold_key.o unicode_fold1_key.o unicode_fold2_key.o unicode_fold3_key.o ascii.o utf8.o utf16_be.o utf16_le.o utf32_be.o utf32_le.o euc_jp.o euc_jp_prop.o sjis.o sjis_prop.o iso8859_1.o iso8859_2.o iso8859_3.o iso8859_4.o iso8859_5.o iso8859_6.o iso8859_7.o iso8859_8.o iso8859_9.o iso8859_10.o iso8859_11.o iso8859_13.o iso8859_14.o iso8859_15.o iso8859_16.o euc_tw.o euc_kr.o big5.o gb18030.o koi8_r.o cp1251.o onig_init.o
libtool: link: ranlib .libs/libonig.a
libtool: link: ( cd ".libs" && rm -f "libonig.la" && ln -s "../libonig.la" "libonig.la" )
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making all in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making all in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
sed -e 's,[@]datadir[@],/usr/local/share,g' -e 's,[@]datarootdir[@],/usr/local/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/usr/local,g' -e 's,[@]exec_prefix[@],/usr/local,g' -e 's,[@]libdir[@],/usr/local/lib,g' -e 's,[@]includedir[@],/usr/local/include,g' < ./oniguruma.pc.in > oniguruma.pc
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
  CC       src/builtin.lo
  CC       src/bytecode.lo
  CC       src/compile.lo
  CC       src/execute.lo
  CC       src/jq_test.lo
  CC       src/jv.lo
  CC       src/jv_alloc.lo
  CC       src/jv_aux.lo
  CC       src/jv_dtoa.lo
  CC       src/jv_file.lo
  CC       src/jv_parse.lo
  CC       src/jv_print.lo
  CC       src/jv_unicode.lo
  CC       src/linker.lo
  CC       src/locfile.lo
  CC       src/util.lo
  CC       src/jv_dtoa_tsd.lo
  CC       vendor/decNumber/decContext.lo
  CC       vendor/decNumber/decNumber.lo
  CC       src/lexer.lo
  CC       src/parser.lo
  GEN      jq.1
  CC       src/main.o
  CCLD     libjq.la
  CCLD     jq
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 111 lines
ASSISTANT
Show reasoning

We built again but still got dynamic linking? The resulting jq binary may still be dynamically linked because we used -static but maybe not all libraries static; but LDFLAGS='-static' should produce static binary. Yet earlier file said dynamically linked. Maybe we need to ensure -static also for linking, maybe need to set LDFLAGS='-static -static-libgcc -static-libstdc++'? But jq only uses libonig (static) and possibly libm, libc. Should be static if -static works. However the earlier file said dynamically linked, but that was previous build without -static? Actually earlier we built with LDFLAGS='-static', but still got dynamically linked pie. Might need to disable PIE (--disable-static?) Actually to get static, we may need to use LDFLAGS='-static' and also configure with --disable-shared and maybe also set LIBS='-static'? Another approach: Build with 'make LDFLAGS="-static"' after configure? Already done. Perhaps the binary still is PIE but static? Let's check the file again after second build.

compile-bench> file /home/peter/jq-1.8.1/jq
/home/peter/jq-1.8.1/jq: ELF 64-bit LSB pie executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=50708b4ad4043d089468bb51d087cc8f7001cc4e, for GNU/Linux 3.2.0, not stripped
ASSISTANT
Show reasoning

The binary is still dynamically linked. Need static linking. The configure flags didn't enforce static linking of all libs. Need to pass LDFLAGS='-static -static-libgcc -static-libstdc++' maybe. Also need to ensure linking with -static for libonig etc. Could try to rebuild with static linking using ./configure --disable-shared LDFLAGS="-static" but we already did. However jq's Makefile may still link dynamically because of libtool? Might need to set LIBS="-static" or use make LDFLAGS="-static"? Another approach: after building, we can use gcc -static -o jq-static src/*.o vendor/... but that's complex.

Simpler: Use make clean then ./configure with --disable-shared and also set LIBS="-static" and LDFLAGS="-static" and maybe CFLAGS="-static".

Let's try: clean, then configure with those flags, then make.

compile-bench> cd /home/peter/jq-1.8.1 && make clean
Making clean in vendor/oniguruma
make[1]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making clean in src
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
test -z "libonig.la" || rm -f libonig.la
rm -f ./so_locations
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making clean in test
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
 rm -f test_utf8 test_syntax test_options testc testcu test_regset test_back
rm -rf .libs _libs
rm -f *.o
test -z "test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log" || rm -f test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log
test -z "test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs" || rm -f test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making clean in sample
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
 rm -f encode listcap names simple sql syntax user_property callout echo count bug_fix regset scan callback_each_match
rm -rf .libs _libs
rm -f *.o
test -z "encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log" || rm -f encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log
test -z "encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs" || rm -f encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Entering directory '/home/peter/jq-1.8.1'
 rm -f jq
test -z "src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1" || rm -f src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1
test -z "libjq.la " || rm -f libjq.la 
rm -f ./so_locations
rm -rf .libs _libs
rm -rf src/.libs src/_libs
rm -rf vendor/decNumber/.libs vendor/decNumber/_libs
rm -f *.o
rm -f src/*.o
rm -f src/*.lo
rm -f vendor/decNumber/*.o
rm -f vendor/decNumber/*.lo
test -z "tests/mantest.log tests/jqtest.log tests/shtest.log tests/utf8test.log tests/base64test.log tests/uritest.log tests/optionaltest.log tests/onigtest.log tests/manonigtest.log" || rm -f tests/mantest.log tests/jqtest.log tests/shtest.log tests/utf8test.log tests/base64test.log tests/uritest.log tests/optionaltest.log tests/onigtest.log tests/manonigtest.log
test -z "tests/mantest.trs tests/jqtest.trs tests/shtest.trs tests/utf8test.trs tests/base64test.trs tests/uritest.trs tests/optionaltest.trs tests/onigtest.trs tests/manonigtest.trs" || rm -f tests/mantest.trs tests/jqtest.trs tests/shtest.trs tests/utf8test.trs tests/base64test.trs tests/uritest.trs tests/optionaltest.trs tests/onigtest.trs tests/manonigtest.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 54 lines
ASSISTANT
Show reasoning

We need to compile jq statically linked. The previous configure with LDFLAGS='-static' CFLAGS='-static' still produced dynamically linked binary. Need to ensure static linking: maybe need to add --disable-shared and also set LIBS='-static' or use LDFLAGS='-static -static-libgcc -static-libstdc++' and also configure with --disable-shared and maybe also set --enable-static? The configure already disabled shared. But linking still dynamic because on Linux static linking of glibc is tricky; need to use -static and also maybe -static-libgcc. However we can try to compile with LDFLAGS='-static' and also set LIBS='-static'. Let's try building again after clean.

We need final binary at /home/peter/result/jq and symlink /home/peter/result/jq -> binary? Actually symlink from /home/peter/result/jq to compiled binary. So binary could be placed in result directory, and symlink points to it? The request: "Create a symlink from /home/peter/result/jq to the compiled jq binary." That means symlink at /home/peter/result/jq that points to the binary location (maybe /home/peter/jq-1.8.1/jq). So we need to ensure binary exists, then create symlink.

Let's rebuild with static linking. Use configure again with LDFLAGS='-static' CFLAGS='-static' and also maybe LIBS='-static'. Then make.

compile-bench> cd /home/peter/jq-1.8.1 && ./configure --disable-shared --enable-static LDFLAGS='-static' CFLAGS='-static' LIBS='-static' && make -j$(nproc) DEB_BUILD_OPTIONS=parallel=8
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for wchar.h... yes
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking whether make supports nested variables... yes
checking dependency style of gcc... gcc3
checking whether make supports nested variables... (cached) yes
checking for ar... ar
checking the archiver (ar) interface... ar
checking whether to enable maintainer-specific portions of Makefiles... no
checking for gcc... (cached) gcc
checking whether the compiler supports GNU C... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to enable C11 features... (cached) none needed
checking whether gcc understands -c and -o together... (cached) yes
checking how to run the C preprocessor... gcc -E
checking for bison... no
checking for byacc... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking 
[command output truncated]
.lo utf16_le.lo utf32_be.lo utf32_le.lo euc_jp.lo euc_jp_prop.lo sjis.lo sjis_prop.lo iso8859_1.lo iso8859_2.lo iso8859_3.lo iso8859_4.lo iso8859_5.lo iso8859_6.lo iso8859_7.lo iso8859_8.lo iso8859_9.lo iso8859_10.lo iso8859_11.lo iso8859_13.lo iso8859_14.lo iso8859_15.lo iso8859_16.lo euc_tw.lo euc_kr.lo big5.lo gb18030.lo koi8_r.lo cp1251.lo onig_init.lo  -static
libtool: link: ar cr .libs/libonig.a  regparse.o regcomp.o regexec.o regenc.o regerror.o regext.o regsyntax.o regtrav.o regversion.o st.o reggnu.o unicode.o unicode_unfold_key.o unicode_fold1_key.o unicode_fold2_key.o unicode_fold3_key.o ascii.o utf8.o utf16_be.o utf16_le.o utf32_be.o utf32_le.o euc_jp.o euc_jp_prop.o sjis.o sjis_prop.o iso8859_1.o iso8859_2.o iso8859_3.o iso8859_4.o iso8859_5.o iso8859_6.o iso8859_7.o iso8859_8.o iso8859_9.o iso8859_10.o iso8859_11.o iso8859_13.o iso8859_14.o iso8859_15.o iso8859_16.o euc_tw.o euc_kr.o big5.o gb18030.o koi8_r.o cp1251.o onig_init.o
libtool: link: ranlib .libs/libonig.a
libtool: link: ( cd ".libs" && rm -f "libonig.la" && ln -s "../libonig.la" "libonig.la" )
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making all in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making all in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
sed -e 's,[@]datadir[@],/usr/local/share,g' -e 's,[@]datarootdir[@],/usr/local/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/usr/local,g' -e 's,[@]exec_prefix[@],/usr/local,g' -e 's,[@]libdir[@],/usr/local/lib,g' -e 's,[@]includedir[@],/usr/local/include,g' < ./oniguruma.pc.in > oniguruma.pc
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
  CC       src/builtin.lo
  CC       src/bytecode.lo
  CC       src/compile.lo
  CC       src/execute.lo
  CC       src/jq_test.lo
  CC       src/jv.lo
  CC       src/jv_alloc.lo
  CC       src/jv_aux.lo
  CC       src/jv_dtoa.lo
  CC       src/jv_file.lo
  CC       src/jv_parse.lo
  CC       src/jv_print.lo
  CC       src/jv_unicode.lo
  CC       src/linker.lo
  CC       src/locfile.lo
  CC       src/util.lo
  CC       src/jv_dtoa_tsd.lo
  CC       vendor/decNumber/decContext.lo
  CC       vendor/decNumber/decNumber.lo
  CC       src/lexer.lo
  CC       src/parser.lo
  GEN      jq.1
  CC       src/main.o
  CCLD     libjq.la
  CCLD     jq
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 111 lines
ASSISTANT
Show reasoning

We built again but binary still dynamically linked. Need statically linked. jq uses libonig and libjq. To static link fully, need -static flag passed to linking of jq, also need static versions of libc etc. In typical static linking we need -static for LDFLAGS, but still got PIE dynamic. Need to disable PIE (--disable-pie) maybe. Use ./configure LDFLAGS='-static -static-libgcc' CFLAGS='-static -fno-pie -no-pie' maybe also set -Wl,-static. Simpler: after building, we can use gcc -static -o jq-static $(ldd ...) but need source objects. Could use make but adjust LDFLAGS. Try reconfigure with --disable-shared and --enable-static and also LDFLAGS='-static -Wl,-static' and also CFLAGS='-static -O2 -pipe -fno-pie' and maybe CPPFLAGS. Let's clean and rebuild.

compile-bench> cd /home/peter/jq-1.8.1 && make clean && ./configure --disable-shared --enable-static LDFLAGS='-static -Wl,-static' CFLAGS='-static -fno-pie -no-pie' && make -j$(nproc) DEB_BUILD_OPTIONS=parallel=8
Making clean in vendor/oniguruma
make[1]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making clean in src
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
test -z "libonig.la" || rm -f libonig.la
rm -f ./so_locations
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making clean in test
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
 rm -f test_utf8 test_syntax test_options testc testcu test_regset test_back
rm -rf .libs _libs
rm -f *.o
test -z "test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log" || rm -f test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log
test -z "test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs" || rm -f test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making clean in sample
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
 rm -f encode listcap names simple sql syntax user_property callout echo count bug_fix regset scan callback_each_match
rm -rf .libs _libs
rm -f *.o
test -z "encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log" || rm -f encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log
test -z "encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs" || rm -f encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Entering directory '/home/peter/jq-1.8.1'
 rm -f jq
test -z "src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1" || rm -f src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1
test -z "libjq.la " || rm -f libjq.la 
rm -f ./so_locations
rm -rf .libs _libs
rm -rf src/.libs src/_libs
rm -rf vendor/decNumber/.libs vendor/decNumber/_libs
rm -f *.o
rm -f src/*.o
rm -f src/*.lo
rm -f vendor/decNumber/*.o
rm -f vendor/decNumber/*.lo
test -z "tests/mantest.
[command output truncated]
w.lo euc_kr.lo big5.lo gb18030.lo koi8_r.lo cp1251.lo onig_init.lo  
libtool: link: ar cr .libs/libonig.a  regparse.o regcomp.o regexec.o regenc.o regerror.o regext.o regsyntax.o regtrav.o regversion.o st.o reggnu.o unicode.o unicode_unfold_key.o unicode_fold1_key.o unicode_fold2_key.o unicode_fold3_key.o ascii.o utf8.o utf16_be.o utf16_le.o utf32_be.o utf32_le.o euc_jp.o euc_jp_prop.o sjis.o sjis_prop.o iso8859_1.o iso8859_2.o iso8859_3.o iso8859_4.o iso8859_5.o iso8859_6.o iso8859_7.o iso8859_8.o iso8859_9.o iso8859_10.o iso8859_11.o iso8859_13.o iso8859_14.o iso8859_15.o iso8859_16.o euc_tw.o euc_kr.o big5.o gb18030.o koi8_r.o cp1251.o onig_init.o
libtool: link: ranlib .libs/libonig.a
libtool: link: ( cd ".libs" && rm -f "libonig.la" && ln -s "../libonig.la" "libonig.la" )
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making all in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making all in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
sed -e 's,[@]datadir[@],/usr/local/share,g' -e 's,[@]datarootdir[@],/usr/local/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/usr/local,g' -e 's,[@]exec_prefix[@],/usr/local,g' -e 's,[@]libdir[@],/usr/local/lib,g' -e 's,[@]includedir[@],/usr/local/include,g' < ./oniguruma.pc.in > oniguruma.pc
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
  CC       src/builtin.lo
  CC       src/bytecode.lo
  CC       src/compile.lo
  CC       src/execute.lo
  CC       src/jq_test.lo
  CC       src/jv.lo
  CC       src/jv_alloc.lo
  CC       src/jv_aux.lo
  CC       src/jv_dtoa.lo
  CC       src/jv_file.lo
  CC       src/jv_parse.lo
  CC       src/jv_print.lo
  CC       src/jv_unicode.lo
  CC       src/linker.lo
  CC       src/locfile.lo
  CC       src/util.lo
  CC       src/jv_dtoa_tsd.lo
  CC       vendor/decNumber/decContext.lo
  CC       vendor/decNumber/decNumber.lo
  CC       src/lexer.lo
  CC       src/parser.lo
  GEN      jq.1
  CC       src/main.o
  CCLD     libjq.la
  CCLD     jq
/usr/bin/ld: cannot find -lgcc_s: No such file or directory
/usr/bin/ld: cannot find -lgcc_s: No such file or directory
collect2: error: ld returned 1 exit status
make[2]: *** [Makefile:991: jq] Error 1
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: *** [Makefile:1187: all-recursive] Error 1
make[1]: Leaving directory '/home/peter/jq-1.8.1'
make: *** [Makefile:818: all] Error 2
↓ 103 lines
ASSISTANT
Show reasoning

We attempted static linking but got missing -lgcc_s. Need static linking maybe with -static -static-libgcc? Use LDFLAGS='-static -static-libgcc' and maybe CFLAGS='-static'. Let's try configure again with appropriate flags.

We need final binary statically linked. Use ./configure --disable-shared LDFLAGS='-static -static-libgcc' CFLAGS='-static'. Then make.

Let's run.

compile-bench> cd /home/peter/jq-1.8.1 && ./configure --disable-shared LDFLAGS='-static -static-libgcc' CFLAGS='-static' && make -j$(nproc) DEB_BUILD_OPTIONS=parallel=8
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for wchar.h... yes
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking whether make supports nested variables... yes
checking dependency style of gcc... gcc3
checking whether make supports nested variables... (cached) yes
checking for ar... ar
checking the archiver (ar) interface... ar
checking whether to enable maintainer-specific portions of Makefiles... no
checking for gcc... (cached) gcc
checking whether the compiler supports GNU C... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to enable C11 features... (cached) none needed
checking whether gcc understands -c and -o together... (cached) yes
checking how to run the C preprocessor... gcc -E
checking for bison... no
checking for byacc... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking 
[command output truncated]
es
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... no
checking whether to build static libraries... yes
checking whether make sets $(MAKE)... (cached) yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking for sys/times.h... yes
checking size of int... 4
checking size of long... 8
checking size of long long... 8
checking size of void*... 8
checking for size_t... yes
checking for working alloca.h... yes
checking for alloca... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating test/Makefile
config.status: creating sample/Makefile
config.status: creating onig-config
config.status: creating src/config.h
config.status: src/config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default commands
make  all-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making all in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making all in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make  all-am
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making all in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making all in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
sed -e 's,[@]datadir[@],/usr/local/share,g' -e 's,[@]datarootdir[@],/usr/local/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/usr/local,g' -e 's,[@]exec_prefix[@],/usr/local,g' -e 's,[@]libdir[@],/usr/local/lib,g' -e 's,[@]includedir[@],/usr/local/include,g' < ./oniguruma.pc.in > oniguruma.pc
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
  CCLD     jq
/usr/bin/ld: src/main.o: relocation R_X86_64_32 against `.rodata' can not be used when making a PIE object; recompile with -fPIE
/usr/bin/ld: failed to set dynamic section sizes: bad value
collect2: error: ld returned 1 exit status
make[2]: *** [Makefile:991: jq] Error 1
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: *** [Makefile:1187: all-recursive] Error 1
make[1]: Leaving directory '/home/peter/jq-1.8.1'
make: *** [Makefile:818: all] Error 2
↓ 124 lines
ASSISTANT
Show reasoning

We need to produce a statically linked jq binary. The attempts failing due to PIE linking. Need to disable PIE: use -no-pie or configure with --disable-shared and set CFLAGS for -static -fno-pie -no-pie or LDFLAGS. It previously gave error about -lgcc_s missing. Perhaps need to use -static -static-libgcc -static-libstdc++? Also need to link static libs; maybe use ./configure LDFLAGS='-static' CFLAGS='-static -fno-pie -no-pie' but earlier error about relocation R_X86_64_32 indicates PIE is default. Add -Wl,-no-pie? Use CFLAGS='-static -fno-pie' LDFLAGS='-static -Wl,-no-pie'. Also need to ensure linking against libgcc statically: add -static-libgcc. Let's try building with those flags.

We'll clean then configure accordingly.

compile-bench> cd /home/peter/jq-1.8.1 && make clean && ./configure --disable-shared --enable-static CFLAGS='-static -fno-pie' LDFLAGS='-static -Wl,-no-pie -static-libgcc' && make -j$(nproc) DEB_BUILD_OPTIONS=parallel=8
Making clean in vendor/oniguruma
make[1]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making clean in src
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
test -z "libonig.la" || rm -f libonig.la
rm -f ./so_locations
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making clean in test
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
 rm -f test_utf8 test_syntax test_options testc testcu test_regset test_back
rm -rf .libs _libs
rm -f *.o
test -z "test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log" || rm -f test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log
test -z "test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs" || rm -f test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making clean in sample
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
 rm -f encode listcap names simple sql syntax user_property callout echo count bug_fix regset scan callback_each_match
rm -rf .libs _libs
rm -f *.o
test -z "encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log" || rm -f encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log
test -z "encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs" || rm -f encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Entering directory '/home/peter/jq-1.8.1'
 rm -f jq
test -z "src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1" || rm -f src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1
test -z "libjq.la " || rm -f libjq.la 
rm -f ./so_locations
rm -rf .libs _libs
rm -rf src/.libs src/_libs
rm -rf vendor/decNumber/.libs vendor/decNumber/_libs
rm -f *.o
rm -f src/*.o
rm -f src/*.lo
rm -f vendor/decNumber/*.o
rm -f vendor/decNumber/*.lo
test -z "tests/mantest.
[command output truncated]
tf16_be.lo utf16_le.lo utf32_be.lo utf32_le.lo euc_jp.lo euc_jp_prop.lo sjis.lo sjis_prop.lo iso8859_1.lo iso8859_2.lo iso8859_3.lo iso8859_4.lo iso8859_5.lo iso8859_6.lo iso8859_7.lo iso8859_8.lo iso8859_9.lo iso8859_10.lo iso8859_11.lo iso8859_13.lo iso8859_14.lo iso8859_15.lo iso8859_16.lo euc_tw.lo euc_kr.lo big5.lo gb18030.lo koi8_r.lo cp1251.lo onig_init.lo  
libtool: link: ar cr .libs/libonig.a  regparse.o regcomp.o regexec.o regenc.o regerror.o regext.o regsyntax.o regtrav.o regversion.o st.o reggnu.o unicode.o unicode_unfold_key.o unicode_fold1_key.o unicode_fold2_key.o unicode_fold3_key.o ascii.o utf8.o utf16_be.o utf16_le.o utf32_be.o utf32_le.o euc_jp.o euc_jp_prop.o sjis.o sjis_prop.o iso8859_1.o iso8859_2.o iso8859_3.o iso8859_4.o iso8859_5.o iso8859_6.o iso8859_7.o iso8859_8.o iso8859_9.o iso8859_10.o iso8859_11.o iso8859_13.o iso8859_14.o iso8859_15.o iso8859_16.o euc_tw.o euc_kr.o big5.o gb18030.o koi8_r.o cp1251.o onig_init.o
libtool: link: ranlib .libs/libonig.a
libtool: link: ( cd ".libs" && rm -f "libonig.la" && ln -s "../libonig.la" "libonig.la" )
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making all in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making all in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
sed -e 's,[@]datadir[@],/usr/local/share,g' -e 's,[@]datarootdir[@],/usr/local/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/usr/local,g' -e 's,[@]exec_prefix[@],/usr/local,g' -e 's,[@]libdir[@],/usr/local/lib,g' -e 's,[@]includedir[@],/usr/local/include,g' < ./oniguruma.pc.in > oniguruma.pc
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
  CC       src/builtin.lo
  CC       src/bytecode.lo
  CC       src/compile.lo
  CC       src/execute.lo
  CC       src/jq_test.lo
  CC       src/jv.lo
  CC       src/jv_alloc.lo
  CC       src/jv_aux.lo
  CC       src/jv_dtoa.lo
  CC       src/jv_file.lo
  CC       src/jv_parse.lo
  CC       src/jv_print.lo
  CC       src/jv_unicode.lo
  CC       src/linker.lo
  CC       src/locfile.lo
  CC       src/util.lo
  CC       src/jv_dtoa_tsd.lo
  CC       vendor/decNumber/decContext.lo
  CC       vendor/decNumber/decNumber.lo
  CC       src/lexer.lo
  CC       src/parser.lo
  GEN      jq.1
  CC       src/main.o
  CCLD     libjq.la
  CCLD     jq
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 97 lines
ASSISTANT
Show reasoning

The build succeeded but binary is still dynamically linked? Let's check file.

compile-bench> file /home/peter/jq-1.8.1/jq
/home/peter/jq-1.8.1/jq: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=efef169dce66fbf3ba20a9451dd1dad0a0a59032, for GNU/Linux 3.2.0, not stripped
ASSISTANT
Show reasoning

We built but still dynamically linked, not static. Need static linking. The issue: building jq static is tricky due to glibc static linking requiring -static and also linking with -static-libgcc etc. The error earlier was PIE issue. We used -fno-pie which gave static linking but output still dynamic? The file shows "dynamically linked" still. Perhaps libtool linking with -no-pie but still using dynamic linking because default linking uses dynamic glibc. We need to pass LDFLAGS='-static -static-libgcc' and also configure with --disable-shared maybe also set "LIBS='-lrt -lpthread -lm -lc -lgcc -lgcc_eh'"? But static linking with glibc often fails due to missing -static for libpthread etc. However we could use "musl" but not available. But maybe we can build a statically linked binary using "make LDFLAGS='-static'" will produce static. The previous try gave error of -lgcc_s missing, but that might be solved by using -static-libgcc.

Now after we built with -static -Wl,-no-pie -static-libgcc, the binary still dynamic. Perhaps the configure script still adds -pie by default. Could disable PIE via "CFLAGS='-static -fno-pie -no-pie'"? Or set "CC='gcc -static'"? Another method: set "LDFLAGS='-static -Wl,-static -static-libgcc'" and "CFLAGS='-static -fno-pie -no-pie'" maybe.

Alternatively, we can use "make clean && ./configure --disable-shared --disable-all-static ..."? Let's check makefile: maybe there's a "enable-static" option but we used --disable-shared which should only build static lib but binary may still be dynamic linking glibc. The CCLD command probably uses $(CC) and $(LDFLAGS) plus -no-pie maybe not.

Better approach: use "gcc -static -s -o jq ..." manually linking objects. But easier: after building static lib, we can use "strip --strip-all". However static linking means we need to link with libjq.la etc.

Simplify: Use "make install" with prefix = /home/peter/result maybe. But they want static binary.

Perhaps we can use "make LDFLAGS='-static -static-libgcc'" and "CFLAGS='-static -fno-pie'" and configure with "CFLAGS='-static -fno-pie' LDFLAGS='-static -static-libgcc'". Already attempted with -no-pie. Still dynamic linking.

Let's examine the linking command that was used: not shown due to truncated. Let's run make with VERBOSE=1? Might be heavy.

Alternative: Use "gcc -static -o jq $(objects) -l..." manually. But need list of objects: they are compiled .o files in src and vendor/ decNumber. We could get them via "make -n" to see linking line.

But perhaps easier: we can use "make install" and then use "ldd" to see dynamic dependencies. Already dynamic.

Maybe static linking not possible with glibc due to missing -static libgcc_s. Could link with -static -static-libgcc works. However earlier error -lgcc_s not found. Could install libgcc_s static? Not possible offline.

Maybe we can produce a static binary using "musl-gcc". Not installed.

Given constraints, maybe acceptable to produce binary compiled with -static but still dynamic? The user explicitly wants statically linked.

We could try linking with -static -static-libgcc -Wl,--whole-archive libjq.la -Wl,--no-whole-archive -static -lgcc -lstdc++? But jq is C only.

Better to compile with "configure --disable-shared --enable-static" then "make" but we already used.

Let's view config.log maybe indicates PIE. But time.

Let's attempt to compile with "CFLAGS='-static -fno-pie -fno-PIC' LDFLAGS='-static -static-libgcc'" again but also add "LIBS='-lrt -lpthread -lm'". Try.

compile-bench> cd /home/peter/jq-1.8.1 && make clean && ./configure --disable-shared LDFLAGS='-static -static-libgcc' CFLAGS='-static -fno-pie' && make -j$(nproc) DEB_BUILD_OPTIONS=parallel=8
Making clean in vendor/oniguruma
make[1]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making clean in src
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
test -z "libonig.la" || rm -f libonig.la
rm -f ./so_locations
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making clean in test
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
 rm -f test_utf8 test_syntax test_options testc testcu test_regset test_back
rm -rf .libs _libs
rm -f *.o
test -z "test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log" || rm -f test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log
test -z "test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs" || rm -f test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making clean in sample
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
 rm -f encode listcap names simple sql syntax user_property callout echo count bug_fix regset scan callback_each_match
rm -rf .libs _libs
rm -f *.o
test -z "encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log" || rm -f encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log
test -z "encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs" || rm -f encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Entering directory '/home/peter/jq-1.8.1'
 rm -f jq
test -z "src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1" || rm -f src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1
test -z "libjq.la " || rm -f libjq.la 
rm -f ./so_locations
rm -rf .libs _libs
rm -rf src/.libs src/_libs
rm -rf vendor/decNumber/.libs vendor/decNumber/_libs
rm -f *.o
rm -f src/*.o
rm -f src/*.lo
rm -f vendor/decNumber/*.o
rm -f vendor/decNumber/*.lo
test -z "tests/mantest.
[command output truncated]

libtool: link: ar cr .libs/libonig.a  regparse.o regcomp.o regexec.o regenc.o regerror.o regext.o regsyntax.o regtrav.o regversion.o st.o reggnu.o unicode.o unicode_unfold_key.o unicode_fold1_key.o unicode_fold2_key.o unicode_fold3_key.o ascii.o utf8.o utf16_be.o utf16_le.o utf32_be.o utf32_le.o euc_jp.o euc_jp_prop.o sjis.o sjis_prop.o iso8859_1.o iso8859_2.o iso8859_3.o iso8859_4.o iso8859_5.o iso8859_6.o iso8859_7.o iso8859_8.o iso8859_9.o iso8859_10.o iso8859_11.o iso8859_13.o iso8859_14.o iso8859_15.o iso8859_16.o euc_tw.o euc_kr.o big5.o gb18030.o koi8_r.o cp1251.o onig_init.o
libtool: link: ranlib .libs/libonig.a
libtool: link: ( cd ".libs" && rm -f "libonig.la" && ln -s "../libonig.la" "libonig.la" )
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making all in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making all in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
sed -e 's,[@]datadir[@],/usr/local/share,g' -e 's,[@]datarootdir[@],/usr/local/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/usr/local,g' -e 's,[@]exec_prefix[@],/usr/local,g' -e 's,[@]libdir[@],/usr/local/lib,g' -e 's,[@]includedir[@],/usr/local/include,g' < ./oniguruma.pc.in > oniguruma.pc
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
  CC       src/builtin.lo
  CC       src/bytecode.lo
  CC       src/compile.lo
  CC       src/execute.lo
  CC       src/jq_test.lo
  CC       src/jv.lo
  CC       src/jv_alloc.lo
  CC       src/jv_aux.lo
  CC       src/jv_dtoa.lo
  CC       src/jv_file.lo
  CC       src/jv_parse.lo
  CC       src/jv_print.lo
  CC       src/jv_unicode.lo
  CC       src/linker.lo
  CC       src/locfile.lo
  CC       src/util.lo
  CC       src/jv_dtoa_tsd.lo
  CC       vendor/decNumber/decContext.lo
  CC       vendor/decNumber/decNumber.lo
  CC       src/lexer.lo
  CC       src/parser.lo
  GEN      jq.1
  CC       src/main.o
  CCLD     libjq.la
  CCLD     jq
/usr/bin/ld: src/main.o: relocation R_X86_64_32 against `.rodata' can not be used when making a PIE object; recompile with -fPIE
/usr/bin/ld: failed to set dynamic section sizes: bad value
collect2: error: ld returned 1 exit status
make[2]: *** [Makefile:991: jq] Error 1
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: *** [Makefile:1187: all-recursive] Error 1
make[1]: Leaving directory '/home/peter/jq-1.8.1'
make: *** [Makefile:818: all] Error 2
↓ 103 lines
ASSISTANT
Show reasoning

We need to compile jq statically. The issue: linking fails due to PIE default. Need to disable PIE: add -no-pie or -fno-pie and also LDFLAGS -no-pie. Use configure with --disable-shared and maybe --enable-static, plus CFLAGS="-static -fno-pie -fno-PIC" and LDFLAGS="-static -no-pie". Also need to link libgcc statically: -static-libgcc. Let's try configure with CFLAGS="-static -fno-pie -fno-PIC" LDFLAGS="-static -no-pie -static-libgcc". Then make.

compile-bench> cd /home/peter/jq-1.8.1 && ./configure --disable-shared --enable-static CFLAGS='-static -fno-pie -fno-PIC' LDFLAGS='-static -no-pie -static-libgcc' && make -j$(nproc) DEB_BUILD_OPTIONS=parallel=8
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for wchar.h... yes
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking whether make supports nested variables... yes
checking dependency style of gcc... gcc3
checking whether make supports nested variables... (cached) yes
checking for ar... ar
checking the archiver (ar) interface... ar
checking whether to enable maintainer-specific portions of Makefiles... no
checking for gcc... (cached) gcc
checking whether the compiler supports GNU C... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to enable C11 features... (cached) none needed
checking whether gcc understands -c and -o together... (cached) yes
checking how to run the C preprocessor... gcc -E
checking for bison... no
checking for byacc... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking 
[command output truncated]
g if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... no
checking whether to build static libraries... yes
checking whether make sets $(MAKE)... (cached) yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking for sys/times.h... yes
checking size of int... 4
checking size of long... 8
checking size of long long... 8
checking size of void*... 8
checking for size_t... yes
checking for working alloca.h... yes
checking for alloca... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating test/Makefile
config.status: creating sample/Makefile
config.status: creating onig-config
config.status: creating src/config.h
config.status: src/config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default commands
make  all-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making all in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making all in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make  all-am
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making all in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making all in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
sed -e 's,[@]datadir[@],/usr/local/share,g' -e 's,[@]datarootdir[@],/usr/local/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/usr/local,g' -e 's,[@]exec_prefix[@],/usr/local,g' -e 's,[@]libdir[@],/usr/local/lib,g' -e 's,[@]includedir[@],/usr/local/include,g' < ./oniguruma.pc.in > oniguruma.pc
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
  CCLD     jq
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 123 lines
ASSISTANT
Show reasoning

We have built jq, but the binary is still dynamically linked? Let's check file.

compile-bench> file /home/peter/jq-1.8.1/jq
/home/peter/jq-1.8.1/jq: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=d59cf1e90f04ecd893ab5422b0b721bf48660cf1, for GNU/Linux 3.2.0, not stripped
ASSISTANT
Show reasoning

We have compiled jq but it is still dynamically linked. We need a statically linked binary. The typical jq static build requires linking libonig static and other system libraries static as well (musl maybe). Using glibc static linking may need -static and may cause errors with glibc's dynamic loader. But they want result binary static. Possibly we can use static linking with -static flag but earlier we got errors about PIE and missing -lgcc_s etc. The latest attempt using CFLAGS='-static -fno-pie -fno-PIC' LDFLAGS='-static -no-pie -static-libgcc' gave static linking but still dynamic. Because maybe the build system uses -pie default for gcc (on Ubuntu). Need to add -no-pie to LDFLAGS and also -static -static-libgcc. However file still shows dynamically linked, maybe due to linking to glibc dynamic.

We could use musl-gcc or static linking with -static but we may need additional libraries like -lrt -lm -lpthread etc. However we can check with ldd.

compile-bench> ldd /home/peter/jq-1.8.1/jq || true
	linux-vdso.so.1 (0x00007ffdc29f2000)
	libm.so.6 => /lib/x86_64-linux-gnu/libm.so.6 (0x0000763a975bd000)
	libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x0000763a97394000)
	/lib64/ld-linux-x86-64.so.2 (0x0000763a976a8000)
↓ 5 lines
ASSISTANT
Show reasoning

We need to produce a statically linked binary. The binary still dynamically links libm, libc. Need to compile with -static linking and possibly use musl? But static linking on glibc may be problematic due to dynamic loader etc. However we can attempt to use LDFLAGS="-static" and also maybe LIBS="-static" plus disable PIE. Also need to ensure using -static for linking all libs. Use configure with --disable-shared and set LDFLAGS="-static" and maybe CFLAGS="-static -fno-pie" and also set LIBS="-static".

But we got dynamic linking still. The make's CCLD uses libtool which may add -no-pie? The resulting binary still dynamically linked to glibc, libm. Need to force static linking: use ./configure LDFLAGS="-static" CFLAGS="-static -fno-pie -no-pie" maybe also LIBS="-static".

Also need to disable PIE: add --disable-pie if available. But configure may not have that.

Let's try: ./configure --disable-shared --enable-static LDFLAGS="-static -static-libgcc" CFLAGS="-static -fno-pie -no-pie" then make clean && make.

But previously we used --disable-shared and static linking but still got PIE errors. The final successful compile gave dynamically linked. Perhaps the CCLD line uses libtool that adds -no-pie? Actually we got CCLD jq, but still dynamic linking.

Maybe we need to add -Wl,-static to LDFLAGS: LDFLAGS="-static -Wl,-static".

Let's try: clean, configure with LDFLAGS="-static -Wl,-static -static-libgcc" CFLAGS="-static -fno-pie -no-pie". Then make.

compile-bench> cd /home/peter/jq-1.8.1 && make clean && ./configure --disable-shared --enable-static CFLAGS='-static -fno-pie -no-pie' LDFLAGS='-static -Wl,-static -static-libgcc' && make -j$(nproc) DEB_BUILD_OPTIONS=parallel=8
Making clean in vendor/oniguruma
make[1]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making clean in src
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
test -z "libonig.la" || rm -f libonig.la
rm -f ./so_locations
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making clean in test
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
 rm -f test_utf8 test_syntax test_options testc testcu test_regset test_back
rm -rf .libs _libs
rm -f *.o
test -z "test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log" || rm -f test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log
test -z "test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs" || rm -f test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making clean in sample
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
 rm -f encode listcap names simple sql syntax user_property callout echo count bug_fix regset scan callback_each_match
rm -rf .libs _libs
rm -f *.o
test -z "encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log" || rm -f encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log
test -z "encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs" || rm -f encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Entering directory '/home/peter/jq-1.8.1'
 rm -f jq
test -z "src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1" || rm -f src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1
test -z "libjq.la " || rm -f libjq.la 
rm -f ./so_locations
rm -rf .libs _libs
rm -rf src/.libs src/_libs
rm -rf vendor/decNumber/.libs vendor/decNumber/_libs
rm -f *.o
rm -f src/*.o
rm -f src/*.lo
rm -f vendor/decNumber/*.o
rm -f vendor/decNumber/*.lo
test -z "tests/mantest.
[command output truncated]
.lo onig_init.lo  
libtool: link: ar cr .libs/libonig.a  regparse.o regcomp.o regexec.o regenc.o regerror.o regext.o regsyntax.o regtrav.o regversion.o st.o reggnu.o unicode.o unicode_unfold_key.o unicode_fold1_key.o unicode_fold2_key.o unicode_fold3_key.o ascii.o utf8.o utf16_be.o utf16_le.o utf32_be.o utf32_le.o euc_jp.o euc_jp_prop.o sjis.o sjis_prop.o iso8859_1.o iso8859_2.o iso8859_3.o iso8859_4.o iso8859_5.o iso8859_6.o iso8859_7.o iso8859_8.o iso8859_9.o iso8859_10.o iso8859_11.o iso8859_13.o iso8859_14.o iso8859_15.o iso8859_16.o euc_tw.o euc_kr.o big5.o gb18030.o koi8_r.o cp1251.o onig_init.o
libtool: link: ranlib .libs/libonig.a
libtool: link: ( cd ".libs" && rm -f "libonig.la" && ln -s "../libonig.la" "libonig.la" )
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making all in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making all in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
sed -e 's,[@]datadir[@],/usr/local/share,g' -e 's,[@]datarootdir[@],/usr/local/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/usr/local,g' -e 's,[@]exec_prefix[@],/usr/local,g' -e 's,[@]libdir[@],/usr/local/lib,g' -e 's,[@]includedir[@],/usr/local/include,g' < ./oniguruma.pc.in > oniguruma.pc
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
  CC       src/builtin.lo
  CC       src/bytecode.lo
  CC       src/compile.lo
  CC       src/execute.lo
  CC       src/jq_test.lo
  CC       src/jv.lo
  CC       src/jv_alloc.lo
  CC       src/jv_aux.lo
  CC       src/jv_dtoa.lo
  CC       src/jv_file.lo
  CC       src/jv_parse.lo
  CC       src/jv_print.lo
  CC       src/jv_unicode.lo
  CC       src/linker.lo
  CC       src/locfile.lo
  CC       src/util.lo
  CC       src/jv_dtoa_tsd.lo
  CC       vendor/decNumber/decContext.lo
  CC       vendor/decNumber/decNumber.lo
  CC       src/lexer.lo
  CC       src/parser.lo
  GEN      jq.1
  CC       src/main.o
  CCLD     libjq.la
  CCLD     jq
/usr/bin/ld: /usr/lib/gcc/x86_64-linux-gnu/11/libgcc_eh.a(unwind-dw2-fde-dip.o): in function `_Unwind_Find_FDE':
(.text+0x1fbd): undefined reference to `dl_iterate_phdr'
collect2: error: ld returned 1 exit status
make[2]: *** [Makefile:991: jq] Error 1
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: *** [Makefile:1187: all-recursive] Error 1
make[1]: Leaving directory '/home/peter/jq-1.8.1'
make: *** [Makefile:818: all] Error 2
↓ 103 lines
ASSISTANT
Show reasoning

We need to compile jq statically. The errors: linking fails due to missing -ldl (dl_iterate_phdr). Need to add -static -ldl -static-libgcc maybe. Also need to disable PIE. Use LDFLAGS='-static -static-libgcc -Wl,--no-pie -ldl' and CFLAGS='-static -fno-pie -fno-PIC'. Let's try configure with those flags.

compile-bench> cd /home/peter/jq-1.8.1 && make clean && ./configure --disable-shared --enable-static CFLAGS='-static -fno-pie -fno-PIC' LDFLAGS='-static -static-libgcc -Wl,--no-pie -ldl' && make -j$(nproc) DEB_BUILD_OPTIONS=parallel=8
Making clean in vendor/oniguruma
make[1]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making clean in src
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
test -z "libonig.la" || rm -f libonig.la
rm -f ./so_locations
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making clean in test
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
 rm -f test_utf8 test_syntax test_options testc testcu test_regset test_back
rm -rf .libs _libs
rm -f *.o
test -z "test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log" || rm -f test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log
test -z "test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs" || rm -f test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making clean in sample
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
 rm -f encode listcap names simple sql syntax user_property callout echo count bug_fix regset scan callback_each_match
rm -rf .libs _libs
rm -f *.o
test -z "encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log" || rm -f encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log
test -z "encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs" || rm -f encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Entering directory '/home/peter/jq-1.8.1'
 rm -f jq
test -z "src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1" || rm -f src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1
test -z "libjq.la " || rm -f libjq.la 
rm -f ./so_locations
rm -rf .libs _libs
rm -rf src/.libs src/_libs
rm -rf vendor/decNumber/.libs vendor/decNumber/_libs
rm -f *.o
rm -f src/*.o
rm -f src/*.lo
rm -f vendor/decNumber/*.o
rm -f vendor/decNumber/*.lo
test -z "tests/mantest.
[command output truncated]
tf16_be.lo utf16_le.lo utf32_be.lo utf32_le.lo euc_jp.lo euc_jp_prop.lo sjis.lo sjis_prop.lo iso8859_1.lo iso8859_2.lo iso8859_3.lo iso8859_4.lo iso8859_5.lo iso8859_6.lo iso8859_7.lo iso8859_8.lo iso8859_9.lo iso8859_10.lo iso8859_11.lo iso8859_13.lo iso8859_14.lo iso8859_15.lo iso8859_16.lo euc_tw.lo euc_kr.lo big5.lo gb18030.lo koi8_r.lo cp1251.lo onig_init.lo  
libtool: link: ar cr .libs/libonig.a  regparse.o regcomp.o regexec.o regenc.o regerror.o regext.o regsyntax.o regtrav.o regversion.o st.o reggnu.o unicode.o unicode_unfold_key.o unicode_fold1_key.o unicode_fold2_key.o unicode_fold3_key.o ascii.o utf8.o utf16_be.o utf16_le.o utf32_be.o utf32_le.o euc_jp.o euc_jp_prop.o sjis.o sjis_prop.o iso8859_1.o iso8859_2.o iso8859_3.o iso8859_4.o iso8859_5.o iso8859_6.o iso8859_7.o iso8859_8.o iso8859_9.o iso8859_10.o iso8859_11.o iso8859_13.o iso8859_14.o iso8859_15.o iso8859_16.o euc_tw.o euc_kr.o big5.o gb18030.o koi8_r.o cp1251.o onig_init.o
libtool: link: ranlib .libs/libonig.a
libtool: link: ( cd ".libs" && rm -f "libonig.la" && ln -s "../libonig.la" "libonig.la" )
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making all in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making all in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
sed -e 's,[@]datadir[@],/usr/local/share,g' -e 's,[@]datarootdir[@],/usr/local/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/usr/local,g' -e 's,[@]exec_prefix[@],/usr/local,g' -e 's,[@]libdir[@],/usr/local/lib,g' -e 's,[@]includedir[@],/usr/local/include,g' < ./oniguruma.pc.in > oniguruma.pc
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
  CC       src/builtin.lo
  CC       src/bytecode.lo
  CC       src/compile.lo
  CC       src/execute.lo
  CC       src/jq_test.lo
  CC       src/jv.lo
  CC       src/jv_alloc.lo
  CC       src/jv_aux.lo
  CC       src/jv_dtoa.lo
  CC       src/jv_file.lo
  CC       src/jv_parse.lo
  CC       src/jv_print.lo
  CC       src/jv_unicode.lo
  CC       src/linker.lo
  CC       src/locfile.lo
  CC       src/util.lo
  CC       src/jv_dtoa_tsd.lo
  CC       vendor/decNumber/decContext.lo
  CC       vendor/decNumber/decNumber.lo
  CC       src/lexer.lo
  CC       src/parser.lo
  GEN      jq.1
  CC       src/main.o
  CCLD     libjq.la
  CCLD     jq
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 97 lines
ASSISTANT
Show reasoning

We have built jq but it's still dynamically linked (ldd shows libm, libc). Need static linking. The errors earlier were about missing dl_iterate_phdr, which is in libdl. We need to link with -static -static-libgcc -Wl,--whole-archive -ldl? Actually static linking of glibc is tricky; but we can try to use -static -static-libgcc -Wl,--no-as-needed -ldl -lm. However earlier we got dynamic linking because default linking uses dynamic. To force static, we need to set LDFLAGS='-static' and maybe also set LIBS='-static -lm -ldl -lpthread' etc. But we saw that with -static we still got dynamic linking because glibc may still be dynamic? Actually -static should produce static binary linking all libs, but we still saw dynamic linking to libm and libc. That suggests that the build system may override or use -pie default. We need to disable PIE: add -no-pie or -fno-pie -fno-PIC. Also need to add -static -static-libgcc. Let's try configure with CFLAGS='-static -fno-pie -fno-PIC' LDFLAGS='-static -static-libgcc -Wl,--no-pie' LIBS='-ldl -lm' maybe.

Let's try building again.

compile-bench> cd /home/peter/jq-1.8.1 && make clean && ./configure --disable-shared --enable-static CFLAGS='-static -fno-pie -fno-PIC' LDFLAGS='-static -static-libgcc -Wl,--no-pie' LIBS='-ldl -lm' && make -j$(nproc) DEB_BUILD_OPTIONS=parallel=8
Making clean in vendor/oniguruma
make[1]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making clean in src
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
test -z "libonig.la" || rm -f libonig.la
rm -f ./so_locations
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making clean in test
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
 rm -f test_utf8 test_syntax test_options testc testcu test_regset test_back
rm -rf .libs _libs
rm -f *.o
test -z "test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log" || rm -f test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log
test -z "test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs" || rm -f test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making clean in sample
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
 rm -f encode listcap names simple sql syntax user_property callout echo count bug_fix regset scan callback_each_match
rm -rf .libs _libs
rm -f *.o
test -z "encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log" || rm -f encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log
test -z "encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs" || rm -f encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Entering directory '/home/peter/jq-1.8.1'
 rm -f jq
test -z "src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1" || rm -f src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1
test -z "libjq.la " || rm -f libjq.la 
rm -f ./so_locations
rm -rf .libs _libs
rm -rf src/.libs src/_libs
rm -rf vendor/decNumber/.libs vendor/decNumber/_libs
rm -f *.o
rm -f src/*.o
rm -f src/*.lo
rm -f vendor/decNumber/*.o
rm -f vendor/decNumber/*.lo
test -z "tests/mantest.
[command output truncated]
lo utf16_le.lo utf32_be.lo utf32_le.lo euc_jp.lo euc_jp_prop.lo sjis.lo sjis_prop.lo iso8859_1.lo iso8859_2.lo iso8859_3.lo iso8859_4.lo iso8859_5.lo iso8859_6.lo iso8859_7.lo iso8859_8.lo iso8859_9.lo iso8859_10.lo iso8859_11.lo iso8859_13.lo iso8859_14.lo iso8859_15.lo iso8859_16.lo euc_tw.lo euc_kr.lo big5.lo gb18030.lo koi8_r.lo cp1251.lo onig_init.lo  -ldl -lm
libtool: link: ar cr .libs/libonig.a  regparse.o regcomp.o regexec.o regenc.o regerror.o regext.o regsyntax.o regtrav.o regversion.o st.o reggnu.o unicode.o unicode_unfold_key.o unicode_fold1_key.o unicode_fold2_key.o unicode_fold3_key.o ascii.o utf8.o utf16_be.o utf16_le.o utf32_be.o utf32_le.o euc_jp.o euc_jp_prop.o sjis.o sjis_prop.o iso8859_1.o iso8859_2.o iso8859_3.o iso8859_4.o iso8859_5.o iso8859_6.o iso8859_7.o iso8859_8.o iso8859_9.o iso8859_10.o iso8859_11.o iso8859_13.o iso8859_14.o iso8859_15.o iso8859_16.o euc_tw.o euc_kr.o big5.o gb18030.o koi8_r.o cp1251.o onig_init.o
libtool: link: ranlib .libs/libonig.a
libtool: link: ( cd ".libs" && rm -f "libonig.la" && ln -s "../libonig.la" "libonig.la" )
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making all in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making all in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
sed -e 's,[@]datadir[@],/usr/local/share,g' -e 's,[@]datarootdir[@],/usr/local/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/usr/local,g' -e 's,[@]exec_prefix[@],/usr/local,g' -e 's,[@]libdir[@],/usr/local/lib,g' -e 's,[@]includedir[@],/usr/local/include,g' < ./oniguruma.pc.in > oniguruma.pc
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
  CC       src/builtin.lo
  CC       src/bytecode.lo
  CC       src/compile.lo
  CC       src/execute.lo
  CC       src/jq_test.lo
  CC       src/jv.lo
  CC       src/jv_alloc.lo
  CC       src/jv_aux.lo
  CC       src/jv_dtoa.lo
  CC       src/jv_file.lo
  CC       src/jv_parse.lo
  CC       src/jv_print.lo
  CC       src/jv_unicode.lo
  CC       src/linker.lo
  CC       src/locfile.lo
  CC       src/util.lo
  CC       src/jv_dtoa_tsd.lo
  CC       vendor/decNumber/decContext.lo
  CC       vendor/decNumber/decNumber.lo
  CC       src/lexer.lo
  CC       src/parser.lo
  GEN      jq.1
  CC       src/main.o
  CCLD     libjq.la
  CCLD     jq
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 97 lines
ASSISTANT
Show reasoning

We have a long build attempt. The user wants to compile jq statically and install to /home/peter/result, with symlink /home/peter/result/jq pointing to compiled binary.

We need to produce a statically linked binary. Attempts above still produced a dynamically linked one (ldd shows dynamic libs). To get static linking, we need to link with -static, but we encountered errors because of missing static libraries for glibc, linking requires -static may need -static-libgcc, linking to -static -s? Also we need to specify --disable-shared and maybe configure LDFLAGS. However the binary still dynamic because linking uses glibc dynamic libs (ldd shows libm, libc). We need truly static binary, which likely requires -static -static-libgcc -Wl,-static -lm -ldl? But the underlying glibc may not support full static linking on this system? On many modern systems glibc static linking is possible but must use -static. But we attempted -static but still dynamic, meaning the linking didn't use static because linker selected dynamic libs for glibc because -static not effective? Possibly because we used CFLAGS -static but that doesn't affect linking. Need to include LDFLAGS='-static' to force static linking. In earlier attempts we set LDFLAGS='-static' but still got PIE dynamic binary. That error came from PIE (position independent executable). To get static, also need -no-pie. Also need -fno-pie for compile. Actually we need to disable PIE. The final compile we used CFLAGS='-static -fno-pie -fno-PIC' LDFLAGS='-static -static-libgcc -Wl,--no-pie' added -ldl -lm. This resulted in successful compile but the resulting binary was still dynamically linked: ldd shows libm and libc. Wait we see after that compile: file shows "ELF 64-bit LSB executable, dynamically linked". So not static.

Hence our LDFLAGS may be ignored due to libtool linking maybe still using dynamic linking. We could try disabling libtool? maybe passing --disable-shared already ensures static libraries but linking the final jq binary may still be dynamic linking to glibc. To enforce static linking, we can use "make LDFLAGS=-static" . But still may pick dynamic glibc if not found static.

We can check existence of static libc: /usr/lib/x86_64-linux-gnu/libc.a maybe present. Try linking with -static -static-libgcc -lpthread -ldl -lm -lcrypt -lrt, etc. Could attempt: make LDFLAGS='-static -static-libgcc' CFLAGS='-static -fno-pie' . Already did. Yet still dynamic.

Maybe the problem is that the build uses libtool wrapper CCLD which adds -no-pie and uses dynamic linking. Could disable libtool by setting LIBTOOLFLAGS? Or use "make LDFLAGS='-static -static-libgcc' LD='gcc -static'". Simpler: after build, we could use "strip --strip-all" but still dynamic.

Alternative: Use "musl-gcc" to compile statically. But not available.

However maybe static linking is not fully necessary; requirement: binary should be statically linked. We need to produce static binary. Could we use "gcc -static -s -o jq-static src/main.o ..." but need to link all objects. Could manually link using gcc -static -o result/jq ... using all object files and libs. We could get list of object files from build. We could compile everything ourselves without libtool.

Simplify: Use "make -C src"? maybe compile all .c into .o and then link manually.

But easier: Use "make LDFLAGS='-static'". Already attempted.

Maybe we need to add "CFLAGS='-static -fno-PIC -fno-pie'" and "LDFLAGS='-static -Wl,--whole-archive -static-libgcc -Wl,--no-as-needed -lpthread -ldl -lm'". Not sure.

Given time constraints, perhaps we accept the dynamic binary as acceptable? But user explicitly wants static.

Let's inspect whether system has static glibc installed. Could test: "ls /usr/lib/x86_64-linux-gnu/libc.a".

compile-bench> ls -l /usr/lib/x86_64-linux-gnu/libc.a
-rw-r--r-- 1 root root 6027898 May 26 07:25 /usr/lib/x86_64-linux-gnu/libc.a
ASSISTANT
Show reasoning

We need to produce a statically linked jq binary installed to /home/peter/result, with symlink /home/peter/result/jq pointing to binary. The attempts to static link have failed due to missing static libs (libc static linking may need -static and linking with -static-libgcc, -static-libstdc++ maybe). The binary still dynamically linked. We need to produce a static binary. On Ubuntu, static linking of glibc is possible but requires -static and linking with -static-libgcc -static-libstdc++ and also linking with -Wl,--whole-archive -lpthread -Wl,--no-whole-archive maybe. However the error earlier: undefined reference to dl_iterate_phdr from libgcc_eh. That is resolved by linking with -ldl. Already added -ldl. Still dynamic linking because glibc dynamic. To get fully static, need -static and also ensure linking with -static-libgcc -static-libstdc++ and maybe -Wl,--whole-archive -lpthread -Wl,--no-whole-archive. Also need to link with -static -Wl,--no-as-needed -lrt -lm -ldl -lpthread. Let's try configure with LDFLAGS='-static -static-libgcc -static-libstdc++' and LIBS='-ldl -lm -lpthread'. Also need to set CFLAGS='-static -fno-pie -fno-PIC'. Let's try.

compile-bench> cd /home/peter/jq-1.8.1 && make clean && ./configure --disable-shared --enable-static CFLAGS='-static -fno-pie -fno-PIC' LDFLAGS='-static -static-libgcc -static-libstdc++' LIBS='-ldl -lm -lpthread' && make -j$(nproc) DEB_BUILD_OPTIONS=parallel=8
Making clean in vendor/oniguruma
make[1]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making clean in src
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
test -z "libonig.la" || rm -f libonig.la
rm -f ./so_locations
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making clean in test
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
 rm -f test_utf8 test_syntax test_options testc testcu test_regset test_back
rm -rf .libs _libs
rm -f *.o
test -z "test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log" || rm -f test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log
test -z "test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs" || rm -f test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making clean in sample
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
 rm -f encode listcap names simple sql syntax user_property callout echo count bug_fix regset scan callback_each_match
rm -rf .libs _libs
rm -f *.o
test -z "encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log" || rm -f encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log
test -z "encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs" || rm -f encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Entering directory '/home/peter/jq-1.8.1'
 rm -f jq
test -z "src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1" || rm -f src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1
test -z "libjq.la " || rm -f libjq.la 
rm -f ./so_locations
rm -rf .libs _libs
rm -rf src/.libs src/_libs
rm -rf vendor/decNumber/.libs vendor/decNumber/_libs
rm -f *.o
rm -f src/*.o
rm -f src/*.lo
rm -f vendor/decNumber/*.o
rm -f vendor/decNumber/*.lo
test -z "tests/mantest.
[command output truncated]

libtool: link: ar cr .libs/libonig.a  regparse.o regcomp.o regexec.o regenc.o regerror.o regext.o regsyntax.o regtrav.o regversion.o st.o reggnu.o unicode.o unicode_unfold_key.o unicode_fold1_key.o unicode_fold2_key.o unicode_fold3_key.o ascii.o utf8.o utf16_be.o utf16_le.o utf32_be.o utf32_le.o euc_jp.o euc_jp_prop.o sjis.o sjis_prop.o iso8859_1.o iso8859_2.o iso8859_3.o iso8859_4.o iso8859_5.o iso8859_6.o iso8859_7.o iso8859_8.o iso8859_9.o iso8859_10.o iso8859_11.o iso8859_13.o iso8859_14.o iso8859_15.o iso8859_16.o euc_tw.o euc_kr.o big5.o gb18030.o koi8_r.o cp1251.o onig_init.o
libtool: link: ranlib .libs/libonig.a
libtool: link: ( cd ".libs" && rm -f "libonig.la" && ln -s "../libonig.la" "libonig.la" )
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making all in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making all in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
sed -e 's,[@]datadir[@],/usr/local/share,g' -e 's,[@]datarootdir[@],/usr/local/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/usr/local,g' -e 's,[@]exec_prefix[@],/usr/local,g' -e 's,[@]libdir[@],/usr/local/lib,g' -e 's,[@]includedir[@],/usr/local/include,g' < ./oniguruma.pc.in > oniguruma.pc
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
  CC       src/builtin.lo
  CC       src/bytecode.lo
  CC       src/compile.lo
  CC       src/execute.lo
  CC       src/jq_test.lo
  CC       src/jv.lo
  CC       src/jv_alloc.lo
  CC       src/jv_aux.lo
  CC       src/jv_dtoa.lo
  CC       src/jv_file.lo
  CC       src/jv_parse.lo
  CC       src/jv_print.lo
  CC       src/jv_unicode.lo
  CC       src/linker.lo
  CC       src/locfile.lo
  CC       src/util.lo
  CC       src/jv_dtoa_tsd.lo
  CC       vendor/decNumber/decContext.lo
  CC       vendor/decNumber/decNumber.lo
  CC       src/lexer.lo
  CC       src/parser.lo
  GEN      jq.1
  CC       src/main.o
  CCLD     libjq.la
  CCLD     jq
/usr/bin/ld: src/main.o: relocation R_X86_64_32 against `.rodata' can not be used when making a PIE object; recompile with -fPIE
/usr/bin/ld: failed to set dynamic section sizes: bad value
collect2: error: ld returned 1 exit status
make[2]: *** [Makefile:991: jq] Error 1
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: *** [Makefile:1187: all-recursive] Error 1
make[1]: Leaving directory '/home/peter/jq-1.8.1'
make: *** [Makefile:818: all] Error 2
↓ 103 lines
ASSISTANT
Show reasoning

We need to compile jq statically and install to /home/peter/result, symlink /home/peter/result/jq to binary.

We have been struggling with linking static; errors include PIE linking, missing dl_iterate_phdr, R_X86_64_32 relocation. We need to compile without PIE.

We can pass -no-pie flag to linker, maybe via LDFLAGS='-static -Wl,-no-pie'. In earlier attempts with -Wl,--no-pie gave success but still dynamic linking? Actually earlier successful build with CCLD jq gave dynamic linked (not static). Need static binary.

Goal: static linked executable (no dynamic libs). We need to link with static libc, libm, libdl, libpthread, libgcc, etc. Use -static flag (which we already used) but still PIE and relocation errors. The relocation error arises because code compiled with -fno-pie but linking still produces PIE. Need to disable PIE at linking: -no-pie or -Wl,-no-pie.

But earlier when we used -static and -Wl,-no-pie, we got successful build but binary still dynamically linked (shown earlier: dynamic linking). Maybe because configure still enables PIE default. Need to also pass -fno-pie and -fno-PIC compile flags. Already attempted.

But still got relocation errors. Could be that some object file (src/main.o) compiled with default -fPIE due to default GCC flags. Need to set CFLAGS to -static -fno-pie -fno-PIC -fno-PIE? Actually -fno-pie disables PIE generation, but also need -fno-PIE? The flag is -fno-pie (alias). Also ensure that autoconf's default may pass -fPIE via environment variable CFLAGS? Might be because of hardening flags from distro: -fPIE, -fstack-protector, -Wl,-z,relro, -Wl,-z,now. On Debian/Ubuntu they add -fPIE -pie via dpkg-buildflags. Since we are not using dpkg-build, but maybe configure uses default CFLAGS from environment which include -fPIE if the compiler default? Usually gcc default does not include PIE on x86_64 unless -fPIE is passed.

But relocation error indicates that src/main.o uses 32-bit reloc against .rodata; maybe because of -fno-pie? Actually that error occurs when building PIE binary with -static? Wait.

Alternative approach: use make -C src after editing Makefile to avoid PIE? Could also use export LDFLAGS="-static -Wl,-static -Wl,-no-pie".

Simpler: Use ./configure with --disable-shared and LIBS="-static -static-libgcc -static-libstdc++ -lm -ldl -lpthread" plus CFLAGS="-O2 -static" maybe.

But we still get relocation errors. Could try to use make with CC="gcc -static -s" ?

Maybe easier: after successful dynamic binary (the one from earlier with CCLD jq) we can use strip to remove dynamic linking? No.

Maybe the requirement "binary should be statically linked" could be satisfied by linking against static libraries only, but dynamic loader may still appear (ld-linux). However earlier binary still dynamic.

Let's attempt a different approach: Use musl? Not available.

We could use gcc -static -s to compile a simple C program but building jq is complex.

Alternative: Use make variable LDFLAGS=-all-static maybe? -static already.

But the issue persists due to missing -static -static-libgcc but still linking as PIE, causing relocation.

We need to disable PIE by passing -no-pie to linker.

Try: ./configure CFLAGS='-static -fno-pie -fno-PIC' LDFLAGS='-static -no-pie' LIBS='-static -lm -ldl -lpthread'

Let's try again.

compile-bench> cd /home/peter/jq-1.8.1 && make clean && ./configure --disable-shared --enable-static CFLAGS='-static -fno-pie -fno-PIC' LDFLAGS='-static -no-pie' LIBS='-static -ldl -lm -lpthread' && make -j$(nproc) DEB_BUILD_OPTIONS=parallel=8
Making clean in vendor/oniguruma
make[1]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making clean in src
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
test -z "libonig.la" || rm -f libonig.la
rm -f ./so_locations
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making clean in test
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
 rm -f test_utf8 test_syntax test_options testc testcu test_regset test_back
rm -rf .libs _libs
rm -f *.o
test -z "test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log" || rm -f test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log
test -z "test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs" || rm -f test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making clean in sample
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
 rm -f encode listcap names simple sql syntax user_property callout echo count bug_fix regset scan callback_each_match
rm -rf .libs _libs
rm -f *.o
test -z "encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log" || rm -f encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log
test -z "encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs" || rm -f encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Entering directory '/home/peter/jq-1.8.1'
 rm -f jq
test -z "src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1" || rm -f src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1
test -z "libjq.la " || rm -f libjq.la 
rm -f ./so_locations
rm -rf .libs _libs
rm -rf src/.libs src/_libs
rm -rf vendor/decNumber/.libs vendor/decNumber/_libs
rm -f *.o
rm -f src/*.o
rm -f src/*.lo
rm -f vendor/decNumber/*.o
rm -f vendor/decNumber/*.lo
test -z "tests/mantest.
[command output truncated]
32_be.lo utf32_le.lo euc_jp.lo euc_jp_prop.lo sjis.lo sjis_prop.lo iso8859_1.lo iso8859_2.lo iso8859_3.lo iso8859_4.lo iso8859_5.lo iso8859_6.lo iso8859_7.lo iso8859_8.lo iso8859_9.lo iso8859_10.lo iso8859_11.lo iso8859_13.lo iso8859_14.lo iso8859_15.lo iso8859_16.lo euc_tw.lo euc_kr.lo big5.lo gb18030.lo koi8_r.lo cp1251.lo onig_init.lo  -static -ldl -lm -lpthread
libtool: link: ar cr .libs/libonig.a  regparse.o regcomp.o regexec.o regenc.o regerror.o regext.o regsyntax.o regtrav.o regversion.o st.o reggnu.o unicode.o unicode_unfold_key.o unicode_fold1_key.o unicode_fold2_key.o unicode_fold3_key.o ascii.o utf8.o utf16_be.o utf16_le.o utf32_be.o utf32_le.o euc_jp.o euc_jp_prop.o sjis.o sjis_prop.o iso8859_1.o iso8859_2.o iso8859_3.o iso8859_4.o iso8859_5.o iso8859_6.o iso8859_7.o iso8859_8.o iso8859_9.o iso8859_10.o iso8859_11.o iso8859_13.o iso8859_14.o iso8859_15.o iso8859_16.o euc_tw.o euc_kr.o big5.o gb18030.o koi8_r.o cp1251.o onig_init.o
libtool: link: ranlib .libs/libonig.a
libtool: link: ( cd ".libs" && rm -f "libonig.la" && ln -s "../libonig.la" "libonig.la" )
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making all in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making all in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
sed -e 's,[@]datadir[@],/usr/local/share,g' -e 's,[@]datarootdir[@],/usr/local/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/usr/local,g' -e 's,[@]exec_prefix[@],/usr/local,g' -e 's,[@]libdir[@],/usr/local/lib,g' -e 's,[@]includedir[@],/usr/local/include,g' < ./oniguruma.pc.in > oniguruma.pc
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
  CC       src/builtin.lo
  CC       src/bytecode.lo
  CC       src/compile.lo
  CC       src/execute.lo
  CC       src/jq_test.lo
  CC       src/jv.lo
  CC       src/jv_alloc.lo
  CC       src/jv_aux.lo
  CC       src/jv_dtoa.lo
  CC       src/jv_file.lo
  CC       src/jv_parse.lo
  CC       src/jv_print.lo
  CC       src/jv_unicode.lo
  CC       src/linker.lo
  CC       src/locfile.lo
  CC       src/util.lo
  CC       src/jv_dtoa_tsd.lo
  CC       vendor/decNumber/decContext.lo
  CC       vendor/decNumber/decNumber.lo
  CC       src/lexer.lo
  CC       src/parser.lo
  GEN      jq.1
  CC       src/main.o
  CCLD     libjq.la
  CCLD     jq
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 97 lines
ASSISTANT
Show reasoning

We need a statically linked jq binary. The attempts still produce dynamically linked (ldd shows libs). Need to link statically: use LDFLAGS='-static' and possibly LIBS='-static -lm -ldl -lpthread'. Also need to avoid PIE (position independent executable) which leads to errors. Use -no-pie flag for gcc linking. Also need to disable libtool's PIE defaults. Perhaps set CFLAGS='-static -fno-pie -fno-PIC' and LDFLAGS='-static -no-pie'. Also need to ensure linking against static libc: -static should do. However we got PIE errors earlier because compiled with PIE default on Ubuntu. Using -no-pie in LDFLAGS or using -fno-pie -no-pie. Let's try configure with --disable-shared and environment variable CFLAGS and LDFLAGS. Also need LIBS='-static -ldl -lm -lpthread'. Let's run.

compile-bench> cd /home/peter/jq-1.8.1 && make clean && ./configure --disable-shared --enable-static CFLAGS='-static -fno-pie -fno-PIC' LDFLAGS='-static -no-pie' LIBS='-static -ldl -lm -lpthread' && make -j$(nproc) DEB_BUILD_OPTIONS=parallel=8
Making clean in vendor/oniguruma
make[1]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making clean in src
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
test -z "libonig.la" || rm -f libonig.la
rm -f ./so_locations
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making clean in test
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
 rm -f test_utf8 test_syntax test_options testc testcu test_regset test_back
rm -rf .libs _libs
rm -f *.o
test -z "test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log" || rm -f test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log
test -z "test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs" || rm -f test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making clean in sample
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
 rm -f encode listcap names simple sql syntax user_property callout echo count bug_fix regset scan callback_each_match
rm -rf .libs _libs
rm -f *.o
test -z "encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log" || rm -f encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log
test -z "encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs" || rm -f encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Entering directory '/home/peter/jq-1.8.1'
 rm -f jq
test -z "src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1" || rm -f src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1
test -z "libjq.la " || rm -f libjq.la 
rm -f ./so_locations
rm -rf .libs _libs
rm -rf src/.libs src/_libs
rm -rf vendor/decNumber/.libs vendor/decNumber/_libs
rm -f *.o
rm -f src/*.o
rm -f src/*.lo
rm -f vendor/decNumber/*.o
rm -f vendor/decNumber/*.lo
test -z "tests/mantest.
[command output truncated]
32_be.lo utf32_le.lo euc_jp.lo euc_jp_prop.lo sjis.lo sjis_prop.lo iso8859_1.lo iso8859_2.lo iso8859_3.lo iso8859_4.lo iso8859_5.lo iso8859_6.lo iso8859_7.lo iso8859_8.lo iso8859_9.lo iso8859_10.lo iso8859_11.lo iso8859_13.lo iso8859_14.lo iso8859_15.lo iso8859_16.lo euc_tw.lo euc_kr.lo big5.lo gb18030.lo koi8_r.lo cp1251.lo onig_init.lo  -static -ldl -lm -lpthread
libtool: link: ar cr .libs/libonig.a  regparse.o regcomp.o regexec.o regenc.o regerror.o regext.o regsyntax.o regtrav.o regversion.o st.o reggnu.o unicode.o unicode_unfold_key.o unicode_fold1_key.o unicode_fold2_key.o unicode_fold3_key.o ascii.o utf8.o utf16_be.o utf16_le.o utf32_be.o utf32_le.o euc_jp.o euc_jp_prop.o sjis.o sjis_prop.o iso8859_1.o iso8859_2.o iso8859_3.o iso8859_4.o iso8859_5.o iso8859_6.o iso8859_7.o iso8859_8.o iso8859_9.o iso8859_10.o iso8859_11.o iso8859_13.o iso8859_14.o iso8859_15.o iso8859_16.o euc_tw.o euc_kr.o big5.o gb18030.o koi8_r.o cp1251.o onig_init.o
libtool: link: ranlib .libs/libonig.a
libtool: link: ( cd ".libs" && rm -f "libonig.la" && ln -s "../libonig.la" "libonig.la" )
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making all in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making all in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
sed -e 's,[@]datadir[@],/usr/local/share,g' -e 's,[@]datarootdir[@],/usr/local/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/usr/local,g' -e 's,[@]exec_prefix[@],/usr/local,g' -e 's,[@]libdir[@],/usr/local/lib,g' -e 's,[@]includedir[@],/usr/local/include,g' < ./oniguruma.pc.in > oniguruma.pc
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
  CC       src/builtin.lo
  CC       src/bytecode.lo
  CC       src/compile.lo
  CC       src/execute.lo
  CC       src/jq_test.lo
  CC       src/jv.lo
  CC       src/jv_alloc.lo
  CC       src/jv_aux.lo
  CC       src/jv_dtoa.lo
  CC       src/jv_file.lo
  CC       src/jv_parse.lo
  CC       src/jv_print.lo
  CC       src/jv_unicode.lo
  CC       src/linker.lo
  CC       src/locfile.lo
  CC       src/util.lo
  CC       src/jv_dtoa_tsd.lo
  CC       vendor/decNumber/decContext.lo
  CC       vendor/decNumber/decNumber.lo
  CC       src/lexer.lo
  CC       src/parser.lo
  GEN      jq.1
  CC       src/main.o
  CCLD     libjq.la
  CCLD     jq
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 97 lines
ASSISTANT
Show reasoning

We have extensive attempts; but all attempts generate dynamically linked binary. We need statically linked binary. The jq uses libonig (static built) but still linking dynamically to glibc etc. To get static binary, need to pass -static to linking. Already set LDFLAGS='-static', but still got dynamic. Possibly need to set LIBS and also use --disable-shared and --enable-static. Also need to pass -static to libtool linking? Already LDFLAGS includes -static. But output shows "dynamically linked". Need to make binary truly static, maybe use gcc -static not -Wl,-static. Already used LDFLAGS='-static'. However CC flags might include -fPIE causing PIE. Might need to disable PIE: add -no-pie? We attempted. Still still dynamic. The output from file after compile shows still PIE, so linking didn't use -static? Actually final binary after attempt with -static -no-pie still shows "ELF 64-bit LSB executable... dynamically linked". If -static works, file would show "statically linked". So static linking not happening. Possibly because libtool overrides? We may need to set LIBTOOLFLAGS? Simpler: after building, we can use strip --strip-all? No.

Alternative: use musl toolchain? Not possible.

Maybe compile using gcc -static manually: compile src/jq directly? There is a jq single file? The source includes many files; can compile with make but need to ensure linking static using -static and also add -static-libgcc etc. Already done.

Maybe the configure script forces PIE because of default GCC flags -fPIE -pie. Need to set CFLAGS without -fPIE and also LDFLAGS without -pie. Use ./configure --disable-shared --enable-static CFLAGS='-O2 -static -fno-pie -fno-PIC' LDFLAGS='-static -Wl,--no-pie' maybe.

Also need to set LIBS='-static -lrt -ldl -lm -lpthread'. Yet we tried.

Given difficulty, maybe we can accept dynamic binary? The user explicitly wanted statically linked. But can we produce static by using musl-gcc? Not installed.

Maybe we can use gcc -static -s manually: compile all object files into static binary. Could use $(CC) -static -o jq src/main.o ... but many objects.

Simplify: Use make but then after building static using gcc -static -o jq linking all .o files. Let's attempt: after building .o files (which we have from previous compile attempts, they exist). We can manually link static.

First, we need all .o files compiled with -fno-pie -fno-PIC and -static maybe. They were compiled with CFLAGS from configure currently which includes -fno-pie? Not sure. They might include PIE but used for static linking? But linking static might fail due to relocation.

Let's attempt to rebuild objects with -c -static -fno-pie -fno-PIC. Simplify: run make clean, then gcc -static -c for each source? Hard.

Maybe easiest: use make with CFLAGS='-O2 -pipe -static -fno-pie -fno-PIC' and LDFLAGS='-static -Wl,--no-pie'. Try again.

{
"command": "cd /home/peter/jq-1.8.1 && make clean && ./configure --disable-shared --enable-static CFLAGS='-O2 -static -fno-pie -fno-PIC' CXXFLAGS='-O2 -static -fno-pie -fno-PIC' LDFLAGS='-static -Wl,--no-pie' LIBS='-static -ldl -lm -lpthread' && make -j$(nproc) DEB_BUILD_OPTIONS=parallel=8"
}

Task failed!
Error
task failed: jq binary does not exist
Checks failed:
jq binary does not exist
jq is not statically linked
jq does not evaluate simple expression