Summary
Performance
| Cost | $0.195 |
| Total elapsed time | 6m33s |
| LLM inference time | 1m51s |
| Command execution time | 4m41s |
| Commands executed | 34 |
All details >
| Attempt ID | xvxegfcsk9paq | Attempt group | run-16-09-22-05 |
| Revision | fb5c74bd2fee | AWS Instance | m8i.2xlarge |
| Start time | 2025-09-16T21:55:48.050Z | End time | 2025-09-16T22:02:22.041Z |
| Task | curl-ssl-arm64-static2 | Environment | ubuntu-22.04-amd64-cross-arm64 |
| Model |  glm-4.5 | OpenRouter slug | z-ai/glm-4.5 |
| Temperature | 1 | Explicit prompt caching | false |
| User msg after tool call | false | Max tool calls | 150 |
| Total timeout seconds | 3600 | Single command timeout | 1800 |
| Cost | $0.195 | Duration | 6m33s |
| LLM inference time | 1m51s | Command execution time | 4m41s |
| Final context tokens | 19,528 | Total output tokens | 3,000 |
| Output reasoning tokens | 1,647 | Messages | 71 |
| Assistant messages | 35 | User messages | 1 |
| System messages | 1 | Commands executed | 34 |
Task
Task: curl-ssl-arm64-static2
curl 8.16.0 is a command-line HTTP client.
Project link: curl.se
Task:
Compile and install curl to a specific location. Build with SSL support (TLS v1.3), brotli, zlib and zstd. Cross-compile to arm64. Link it statically. This is a variant of curl-ssl-arm64-static, with a hint to do a trial run of compiled binary.
Difficulties:
Cross-compilation toolchain setup, manually cross-compiling all dependencies, properly configuring SSL certificates in OpenSSL.
Environment:
Ubuntu 22.04 on amd64, with internet access.
Execution log
SYSTEM
You are a package-building specialist operating a Ubuntu 22.04 bash shell via one tool: run_terminal_cmd.
The current working directory of every run_terminal_cmd is /home/peter.
Execution rules:
- Always pass non-interactive flags for any command that could prompt (e.g., -y, --yes, DEBIAN_FRONTEND=noninteractive).
- Don't include any newlines in the command.
- You can use sudo.
If you encounter any errors or issues while doing the user's request, you must fix them and continue the task.
At the end verify you did the user request correctly.
USER
You are given a curl v8.16.0 source code at /home/peter/curl.tar.gz. Please compile curl and install it to /home/peter/result. Create a symlink from /home/peter/result/curl to the actual binary. Make sure it builds with SSL support (TLS v1.3), brotli, zlib and zstd. The binary should be statically compiled for arm64. Do a trial run via qemu-aarch64-static, making sure this EXACT command works correctly: curl https://google.com
ASSISTANT
Show reasoning
I need to compile curl v8.16.0 from source and install it to /home/peter/result with specific requirements:
1. Extract the curl source from /home/peter/curl.tar.gz
2. Configure with SSL support (TLS v1.3), brotli, zlib, zstd
3. Statically compile for arm64
4. Install to /home/peter/result
5. Create symlink from /home/peter/result/curl to actual binary
6. Test with qemu-aarch64-static using curl https://google.com
Let me start by extracting the source and checking what's available:
I'll help you compile curl v8.16.0 with the specified requirements. Let me start by extracting the source code and checking what dependencies are available.
compile-bench> tar -tzf curl.tar.gz | head -5 curl-8.16.0/
curl-8.16.0/.editorconfig
curl-8.16.0/CHANGES.md
curl-8.16.0/CMake/
curl-8.16.0/CMake/CMakeConfigurableFile.in
↓ 6 lines
compile-bench> tar -tzf curl.tar.gz | head -5
curl-8.16.0/ curl-8.16.0/.editorconfig curl-8.16.0/CHANGES.md curl-8.16.0/CMake/ curl-8.16.0/CMake/CMakeConfigurableFile.in
ASSISTANT
Show reasoning
Good, the tar.gz contains curl-8.16.0 directory. Now I need to extract it and then install the necessary dependencies for building curl with SSL, brotli, zlib, and zstd support, cross-compiling for arm64.
compile-bench> tar -xzf curl.tar.gz
[empty output]
ASSISTANT
Show reasoning
Now I need to extract the source and then install the necessary dependencies for building curl with SSL support, brotli, zlib, zstd, and cross-compiling for arm64. Let me first extract the source and then check what build dependencies are available.
compile-bench> cd curl-8.16.0 && ls -la total 2312
drwxr-xr-x 14 peter peter 4096 Sep 10 05:43 .
drwxr-x--- 1 peter peter 4096 Sep 16 21:55 ..
-rw-r--r-- 1 peter peter 284 Sep 10 05:43 .editorconfig
-rw-r--r-- 1 peter peter 438 Sep 10 05:43 CHANGES.md
drwxr-xr-x 2 peter peter 4096 Sep 10 05:43 CMake
-rw-r--r-- 1 peter peter 92961 Sep 10 05:43 CMakeLists.txt
-rw-r--r-- 1 peter peter 1088 Sep 10 05:43 COPYING
-rw-r--r-- 1 peter peter 1712 Sep 10 05:43 Dockerfile
-rw-r--r-- 1 peter peter 6930 Sep 10 05:43 Makefile.am
-rw-r--r-- 1 peter peter 39602 Sep 10 05:43 Makefile.in
-rw-r--r-- 1 peter peter 1664 Sep 10 05:43 README
-rw-r--r-- 1 peter peter 28109 Sep 10 05:43 RELEASE-NOTES
-rw-r--r-- 1 peter peter 44196 Sep 10 05:43 acinclude.m4
-rw-r--r-- 1 peter peter 45838 Sep 10 05:43 aclocal.m4
-rwxr-xr-x 1 peter peter 7400 Sep 10 05:43 compile
-rwxr-xr-x 1 peter peter 49482 Sep 10 05:43 config.guess
-rwxr-xr-x 1 peter peter 35406 Sep 10 05:43 config.sub
-rwxr-xr-x 1 peter peter 1349020 Sep 10 05:43 configure
-rw-r--r-- 1 peter peter 166752 Sep 10 05:43 configure.ac
-rw-r--r-- 1 peter peter 4778 Sep 10 05:43 curl-config.in
-rwxr-xr-x 1 peter peter 23568 Sep 10 05:43 depcomp
drwxr-xr-x 7 peter peter 4096 Sep 10 05:43 docs
drwxr-xr-x 3 peter peter 4096 Sep 10 05:43 include
-rwxr-xr-x 1 peter peter 15358 Sep 10 05:43 install-sh
drwxr-xr-x 7 peter peter 12288 Sep 10 05:43 lib
-rw-r--r-- 1 peter peter 1586 Sep 10 05:43 libcurl.pc.in
-rwxr-xr-x 1 peter peter 333057 Sep 10 05:43 ltmain.sh
drwxr-xr-x 2 peter peter 4096 Sep 10 05:43 m4
-rwxr-xr-x 1 peter peter 6878 Sep 10 05:43 missing
drwxr-xr-x 4 peter peter 4096 Sep 10 05:43 packages
drwxr-xr-x 5 peter peter 4096 Sep 10 05:43 plan9
drwxr-xr-x 2 peter peter 4096 Sep 10 05:43 projects
drwxr-xr-x 2 peter peter 4096 Sep 10 05:43 scripts
drwxr-xr-x 2 peter peter 4096 Sep 10 05:43 src
drwxr-xr-x 10 peter peter 4096 Sep 10 05:43 tests
drwxr-xr-x 2 peter peter 4096 Sep 10 05:43 winbuild
↓ 38 lines
compile-bench> cd curl-8.16.0 && ls -la
total 2312 drwxr-xr-x 14 peter peter 4096 Sep 10 05:43 . drwxr-x--- 1 peter peter 4096 Sep 16 21:55 .. -rw-r--r-- 1 peter peter 284 Sep 10 05:43 .editorconfig -rw-r--r-- 1 peter peter 438 Sep 10 05:43 CHANGES.md drwxr-xr-x 2 peter peter 4096 Sep 10 05:43 CMake -rw-r--r-- 1 peter peter 92961 Sep 10 05:43 CMakeLists.txt -rw-r--r-- 1 peter peter 1088 Sep 10 05:43 COPYING -rw-r--r-- 1 peter peter 1712 Sep 10 05:43 Dockerfile -rw-r--r-- 1 peter peter 6930 Sep 10 05:43 Makefile.am -rw-r--r-- 1 peter peter 39602 Sep 10 05:43 Makefile.in -rw-r--r-- 1 peter peter 1664 Sep 10 05:43 README -rw-r--r-- 1 peter peter 28109 Sep 10 05:43 RELEASE-NOTES -rw-r--r-- 1 peter peter 44196 Sep 10 05:43 acinclude.m4 -rw-r--r-- 1 peter peter 45838 Sep 10 05:43 aclocal.m4 -rwxr-xr-x 1 peter peter 7400 Sep 10 05:43 compile -rwxr-xr-x 1 peter peter 49482 Sep 10 05:43 config.guess -rwxr-xr-x 1 peter peter 35406 Sep 10 05:43 config.sub -rwxr-xr-x 1 peter peter 1349020 Sep 10 05:43 configure -rw-r--r-- 1 peter peter 166752 Sep 10 05:43 configure.ac -rw-r--r-- 1 peter peter 4778 Sep 10 05:43 curl-config.in -rwxr-xr-x 1 peter peter 23568 Sep 10 05:43 depcomp drwxr-xr-x 7 peter peter 4096 Sep 10 05:43 docs drwxr-xr-x 3 peter peter 4096 Sep 10 05:43 include -rwxr-xr-x 1 peter peter 15358 Sep 10 05:43 install-sh drwxr-xr-x 7 peter peter 12288 Sep 10 05:43 lib -rw-r--r-- 1 peter peter 1586 Sep 10 05:43 libcurl.pc.in -rwxr-xr-x 1 peter peter 333057 Sep 10 05:43 ltmain.sh drwxr-xr-x 2 peter peter 4096 Sep 10 05:43 m4 -rwxr-xr-x 1 peter peter 6878 Sep 10 05:43 missing drwxr-xr-x 4 peter peter 4096 Sep 10 05:43 packages drwxr-xr-x 5 peter peter 4096 Sep 10 05:43 plan9 drwxr-xr-x 2 peter peter 4096 Sep 10 05:43 projects drwxr-xr-x 2 peter peter 4096 Sep 10 05:43 scripts drwxr-xr-x 2 peter peter 4096 Sep 10 05:43 src drwxr-xr-x 10 peter peter 4096 Sep 10 05:43 tests drwxr-xr-x 2 peter peter 4096 Sep 10 05:43 winbuild
ASSISTANT
Show reasoning
Good, I can see the curl source code is extracted. Now I need to check what cross-compilation tools are available for arm64 and what dependencies are needed for SSL, brotli, zlib, and zstd. Let me first check the current architecture and see if we have the necessary cross-compilation tools.
compile-bench> dpkg --print-architecture
amd64
ASSISTANT
Show reasoning
The current architecture is amd64, but I need to build for arm64 statically. I need to install the cross-compilation toolchain and all the necessary dependencies for static linking with SSL, brotli, zlib, and zstd support.
Let me start by installing the required packages for cross-compilation and static libraries.
compile-bench> apt update && apt install -y gcc-aarch64-linux-gnu g++-aarch64-linux-gnu binutils-aarch64-linux-gnu qemu-user-static
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 3%
Reading package lists... 3%
Reading package lists... 4%
Reading package lists... 4%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 52%
Reading package lists... 52%
Reading package lists... 67%
Reading package lists... 67%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 81%
Reading package lists... 81%
Reading package lists... 96%
Reading package lists... 96%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... Done
E: Could not open lock file /var/lib/apt/lists/lock - open (13: Permission denied)
E: Unable to lock directory /var/lib/apt/lists/
↓ 4 lines
compile-bench> apt update && apt install -y gcc-aarch64-linux-gnu g++-aarch64-linux-gnu binutils-aarch64-linux-gnu qemu-user-static
Reading package lists... 0% Reading package lists... 0% Reading package lists... 0% Reading package lists... 3% Reading package lists... 3% Reading package lists... 4% Reading package lists... 4% Reading package lists... 42% Reading package lists... 42% Reading package lists... 42% Reading package lists... 42% Reading package lists... 52% Reading package lists... 52% Reading package lists... 67% Reading package lists... 67% Reading package lists... 72% Reading package lists... 72% Reading package lists... 72% Reading package lists... 72% Reading package lists... 72% Reading package lists... 72% Reading package lists... 72% Reading package lists... 72% Reading package lists... 81% Reading package lists... 81% Reading package lists... 96% Reading package lists... 96% Reading package lists... 99% Reading package lists... 99% Reading package lists... 99% Reading package lists... 99% Reading package lists... Done E: Could not open lock file /var/lib/apt/lists/lock - open (13: Permission denied) E: Unable to lock directory /var/lib/apt/lists/
ASSISTANT
Show reasoning
I need to use sudo to install the packages. Let me try again with sudo.
compile-bench> sudo apt update && sudo apt install -y gcc-aarch64-linux-gnu g++-aarch64-linux-gnu binutils-aarch64-linux-gnu qemu-user-static
0% [Working]
Hit:1 http://archive.ubuntu.com/ubuntu jammy InRelease
0% [Waiting for headers] [Connecting to security.ubuntu.com (185.125.190.81)]
Get:2 http://archive.ubuntu.com/ubuntu jammy-updates InRelease [128 kB]
0% [2 InRelease 12.7 kB/128 kB 10%] [Connecting to security.ubuntu.com (185.125
0% [2 InRelease 47.5 kB/128 kB 37%] [Waiting for headers]
0% [Waiting for headers] [Waiting for headers]
Get:3 http://archive.ubuntu.com/ubuntu jammy-backports InRelease [127 kB]
0% [3 InRelease 6932 B/127 kB 5%] [Waiting for headers]
0% [Waiting for headers]
0% [Waiting for headers]
Get:4 http://security.ubuntu.com/ubuntu jammy-security InRelease [129 kB]
0% [Waiting for headers] [4 InRelease 14.2 kB/129 kB 11%]
Get:5 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 Packages [3624 kB]
0% [5 Packages 6999 B/3624 kB 0%] [4 InRelease 14.2 kB/129 kB 11%]
0% [5 Packages 240 kB/3624 kB 7%] [4 InRelease 14.2 kB/129 kB 11%]
0% [4 InRelease 34.4 kB/129 kB 27%]
0% [5 Packages store 0 B] [Waiting for headers] [4 InRelease 34.4 kB/129 kB 27%
Get:6 http://archive.ubuntu.com/ubuntu jammy-updates/universe amd64 Packages [1581 kB]
0% [5 Packages store 0 B] [6 Packages 51.8 kB/1581 kB 3%] [4 InRelease 43.1 kB/
0% [5 Packages store 0 B] [4 InRelease 43.1 kB/129 kB 33%]
0% [4 InRelease 75.0 kB/129 kB 58%]
0% [6 Packages store 0 B] [4 InRelease 75.0 kB/129 kB 58%]
0% [4 InRelease 101 kB/129 kB 78%]
0% [Working]
46% [Working]
Get:7 http://security.ubuntu.com/ubuntu jammy-security/main amd64 Packages [3311 kB]
46% [7 Packages 2655 B/3311 kB 0%]
63% [Working]
63% [7 Packages store 0 B]
Get:8 http://security.ubuntu.com/ubuntu jammy-security/multiverse amd64 Packages [80.3 kB]
63% [7 Packages store 0 B] [8 Packages 32.9 kB/80.3 kB 41%]
64% [7 Packages store 0 B] [Waiting for headers]
Get:9 http://security.ubuntu.com/ubuntu jammy-security/universe amd64 Packages [1274 kB]
64% [7 Packages store 0 B] [9 Packages 17.9 kB/1274 kB 1%]
66
[command output truncated]
ected package linux-libc-dev-arm64-cross.
Preparing to unpack .../19-linux-libc-dev-arm64-cross_5.15.0-22.22cross3_all.deb ...
Unpacking linux-libc-dev-arm64-cross (5.15.0-22.22cross3) ...
Selecting previously unselected package libc6-dev-arm64-cross.
Preparing to unpack .../20-libc6-dev-arm64-cross_2.35-0ubuntu1cross3_all.deb ...
Unpacking libc6-dev-arm64-cross (2.35-0ubuntu1cross3) ...
Selecting previously unselected package libstdc++-11-dev-arm64-cross.
Preparing to unpack .../21-libstdc++-11-dev-arm64-cross_11.4.0-1ubuntu1~22.04cross1_all.deb ...
Unpacking libstdc++-11-dev-arm64-cross (11.4.0-1ubuntu1~22.04cross1) ...
Selecting previously unselected package g++-11-aarch64-linux-gnu.
Preparing to unpack .../22-g++-11-aarch64-linux-gnu_11.4.0-1ubuntu1~22.04cross1_amd64.deb ...
Unpacking g++-11-aarch64-linux-gnu (11.4.0-1ubuntu1~22.04cross1) ...
Selecting previously unselected package gcc-aarch64-linux-gnu.
Preparing to unpack .../23-gcc-aarch64-linux-gnu_4%3a11.2.0-1ubuntu1_amd64.deb ...
Unpacking gcc-aarch64-linux-gnu (4:11.2.0-1ubuntu1) ...
Selecting previously unselected package g++-aarch64-linux-gnu.
Preparing to unpack .../24-g++-aarch64-linux-gnu_4%3a11.2.0-1ubuntu1_amd64.deb ...
Unpacking g++-aarch64-linux-gnu (4:11.2.0-1ubuntu1) ...
Setting up gcc-11-aarch64-linux-gnu-base:amd64 (11.4.0-1ubuntu1~22.04cross1) ...
Setting up gcc-12-cross-base (12.3.0-1ubuntu1~22.04cross1) ...
Setting up binutils-aarch64-linux-gnu (2.38-4ubuntu2.8) ...
Setting up libc6-arm64-cross (2.35-0ubuntu1cross3) ...
Setting up libitm1-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up linux-libc-dev-arm64-cross (5.15.0-22.22cross3) ...
Setting up cpp-11-aarch64-linux-gnu (11.4.0-1ubuntu1~22.04cross1) ...
Setting up gcc-11-cross-base (11.4.0-1ubuntu1~22.04cross1) ...
Setting up libgcc-s1-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up libatomic1-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up liblsan0-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up libgomp1-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up libasan6-arm64-cross (11.4.0-1ubuntu1~22.04cross1) ...
Setting up libtsan0-arm64-cross (11.4.0-1ubuntu1~22.04cross1) ...
Setting up libhwasan0-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up libc6-dev-arm64-cross (2.35-0ubuntu1cross3) ...
Setting up libstdc++6-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up cpp-aarch64-linux-gnu (4:11.2.0-1ubuntu1) ...
Setting up libubsan1-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up libgcc-11-dev-arm64-cross (11.4.0-1ubuntu1~22.04cross1) ...
Setting up gcc-11-aarch64-linux-gnu (11.4.0-1ubuntu1~22.04cross1) ...
Setting up libstdc++-11-dev-arm64-cross (11.4.0-1ubuntu1~22.04cross1) ...
Setting up g++-11-aarch64-linux-gnu (11.4.0-1ubuntu1~22.04cross1) ...
Setting up gcc-aarch64-linux-gnu (4:11.2.0-1ubuntu1) ...
Setting up g++-aarch64-linux-gnu (4:11.2.0-1ubuntu1) ...
Processing triggers for libc-bin (2.35-0ubuntu3.10) ...
↓ 56 lines
compile-bench> sudo apt update && sudo apt install -y gcc-aarch64-linux-gnu g++-aarch64-linux-gnu binutils-aarch64-linux-gnu qemu-user-static
0% [Working]
Hit:1 http://archive.ubuntu.com/ubuntu jammy InRelease
0% [Waiting for headers] [Connecting to security.ubuntu.com (185.125.190.81)]
Get:2 http://archive.ubuntu.com/ubuntu jammy-updates InRelease [128 kB]
0% [2 InRelease 12.7 kB/128 kB 10%] [Connecting to security.ubuntu.com (185.125
0% [2 InRelease 47.5 kB/128 kB 37%] [Waiting for headers]
0% [Waiting for headers] [Waiting for headers]
Get:3 http://archive.ubuntu.com/ubuntu jammy-backports InRelease [127 kB]
0% [3 InRelease 6932 B/127 kB 5%] [Waiting for headers]
0% [Waiting for headers]
0% [Waiting for headers]
Get:4 http://security.ubuntu.com/ubuntu jammy-security InRelease [129 kB]
0% [Waiting for headers] [4 InRelease 14.2 kB/129 kB 11%]
Get:5 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 Packages [3624 kB]
0% [5 Packages 6999 B/3624 kB 0%] [4 InRelease 14.2 kB/129 kB 11%]
0% [5 Packages 240 kB/3624 kB 7%] [4 InRelease 14.2 kB/129 kB 11%]
0% [4 InRelease 34.4 kB/129 kB 27%]
0% [5 Packages store 0 B] [Waiting for headers] [4 InRelease 34.4 kB/129 kB 27%
Get:6 http://archive.ubuntu.com/ubuntu jammy-updates/universe amd64 Packages [1581 kB]
0% [5 Packages store 0 B] [6 Packages 51.8 kB/1581 kB 3%] [4 InRelease 43.1 kB/
0% [5 Packages store 0 B] [4 InRelease 43.1 kB/129 kB 33%]
0% [4 InRelease 75.0 kB/129 kB 58%]
0% [6 Packages store 0 B] [4 InRelease 75.0 kB/129 kB 58%]
0% [4 InRelease 101 kB/129 kB 78%]
0% [Working]
46% [Working]
Get:7 http://security.ubuntu.com/ubuntu jammy-security/main amd64 Packages [3311 kB]
46% [7 Packages 2655 B/3311 kB 0%]
63% [Working]
63% [7 Packages store 0 B]
Get:8 http://security.ubuntu.com/ubuntu jammy-security/multiverse amd64 Packages [80.3 kB]
63% [7 Packages store 0 B] [8 Packages 32.9 kB/80.3 kB 41%]
64% [7 Packages store 0 B] [Waiting for headers]
Get:9 http://security.ubuntu.com/ubuntu jammy-security/universe amd64 Packages [1274 kB]
64% [7 Packages store 0 B] [9 Packages 17.9 kB/1274 kB 1%]
66
[command output truncated]
ected package linux-libc-dev-arm64-cross.
Preparing to unpack .../19-linux-libc-dev-arm64-cross_5.15.0-22.22cross3_all.deb ...
Unpacking linux-libc-dev-arm64-cross (5.15.0-22.22cross3) ...
Selecting previously unselected package libc6-dev-arm64-cross.
Preparing to unpack .../20-libc6-dev-arm64-cross_2.35-0ubuntu1cross3_all.deb ...
Unpacking libc6-dev-arm64-cross (2.35-0ubuntu1cross3) ...
Selecting previously unselected package libstdc++-11-dev-arm64-cross.
Preparing to unpack .../21-libstdc++-11-dev-arm64-cross_11.4.0-1ubuntu1~22.04cross1_all.deb ...
Unpacking libstdc++-11-dev-arm64-cross (11.4.0-1ubuntu1~22.04cross1) ...
Selecting previously unselected package g++-11-aarch64-linux-gnu.
Preparing to unpack .../22-g++-11-aarch64-linux-gnu_11.4.0-1ubuntu1~22.04cross1_amd64.deb ...
Unpacking g++-11-aarch64-linux-gnu (11.4.0-1ubuntu1~22.04cross1) ...
Selecting previously unselected package gcc-aarch64-linux-gnu.
Preparing to unpack .../23-gcc-aarch64-linux-gnu_4%3a11.2.0-1ubuntu1_amd64.deb ...
Unpacking gcc-aarch64-linux-gnu (4:11.2.0-1ubuntu1) ...
Selecting previously unselected package g++-aarch64-linux-gnu.
Preparing to unpack .../24-g++-aarch64-linux-gnu_4%3a11.2.0-1ubuntu1_amd64.deb ...
Unpacking g++-aarch64-linux-gnu (4:11.2.0-1ubuntu1) ...
Setting up gcc-11-aarch64-linux-gnu-base:amd64 (11.4.0-1ubuntu1~22.04cross1) ...
Setting up gcc-12-cross-base (12.3.0-1ubuntu1~22.04cross1) ...
Setting up binutils-aarch64-linux-gnu (2.38-4ubuntu2.8) ...
Setting up libc6-arm64-cross (2.35-0ubuntu1cross3) ...
Setting up libitm1-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up linux-libc-dev-arm64-cross (5.15.0-22.22cross3) ...
Setting up cpp-11-aarch64-linux-gnu (11.4.0-1ubuntu1~22.04cross1) ...
Setting up gcc-11-cross-base (11.4.0-1ubuntu1~22.04cross1) ...
Setting up libgcc-s1-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up libatomic1-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up liblsan0-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up libgomp1-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up libasan6-arm64-cross (11.4.0-1ubuntu1~22.04cross1) ...
Setting up libtsan0-arm64-cross (11.4.0-1ubuntu1~22.04cross1) ...
Setting up libhwasan0-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up libc6-dev-arm64-cross (2.35-0ubuntu1cross3) ...
Setting up libstdc++6-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up cpp-aarch64-linux-gnu (4:11.2.0-1ubuntu1) ...
Setting up libubsan1-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up libgcc-11-dev-arm64-cross (11.4.0-1ubuntu1~22.04cross1) ...
Setting up gcc-11-aarch64-linux-gnu (11.4.0-1ubuntu1~22.04cross1) ...
Setting up libstdc++-11-dev-arm64-cross (11.4.0-1ubuntu1~22.04cross1) ...
Setting up g++-11-aarch64-linux-gnu (11.4.0-1ubuntu1~22.04cross1) ...
Setting up gcc-aarch64-linux-gnu (4:11.2.0-1ubuntu1) ...
Setting up g++-aarch64-linux-gnu (4:11.2.0-1ubuntu1) ...
Processing triggers for libc-bin (2.35-0ubuntu3.10) ...
ASSISTANT
Show reasoning
Good, I have the cross-compilation tools installed. Now I need to install the development libraries for SSL, brotli, zlib, and zstd for the arm64 architecture. Let me install the necessary packages.
compile-bench> sudo apt install -y libssl-dev zlib1g-dev libbrotli-dev libzstd-dev:arm64 libssl-dev:arm64 zlib1g-dev:arm64 libbrotli-dev:arm64
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 3%
Reading package lists... 3%
Reading package lists... 4%
Reading package lists... 4%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 52%
Reading package lists... 52%
Reading package lists... 67%
Reading package lists... 67%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 81%
Reading package lists... 81%
Reading package lists... 96%
Reading package lists... 96%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... Done
Building dependency tree... 0%
Building dependency tree... 0%
Building dependency tree... 50%
Building dependency tree... 50%
Building dependency tree... 94%
Building dependency tree... Done
Reading state information... 0%
Reading state information... 1%
Reading state information... Done
E: Unable to locate package libzstd-dev:arm64
E: Unable to locate package libssl-dev:arm64
E: Unable to locate package zlib1g-dev:arm64
E: Unable to locate package libbrotli-dev:arm64
↓ 8 lines
compile-bench> sudo apt install -y libssl-dev zlib1g-dev libbrotli-dev libzstd-dev:arm64 libssl-dev:arm64 zlib1g-dev:arm64 libbrotli-dev:arm64
Reading package lists... 0% Reading package lists... 0% Reading package lists... 0% Reading package lists... 3% Reading package lists... 3% Reading package lists... 4% Reading package lists... 4% Reading package lists... 42% Reading package lists... 42% Reading package lists... 42% Reading package lists... 42% Reading package lists... 52% Reading package lists... 52% Reading package lists... 67% Reading package lists... 67% Reading package lists... 71% Reading package lists... 71% Reading package lists... 72% Reading package lists... 72% Reading package lists... 72% Reading package lists... 72% Reading package lists... 72% Reading package lists... 72% Reading package lists... 81% Reading package lists... 81% Reading package lists... 96% Reading package lists... 96% Reading package lists... 99% Reading package lists... 99% Reading package lists... 99% Reading package lists... 99% Reading package lists... Done Building dependency tree... 0% Building dependency tree... 0% Building dependency tree... 50% Building dependency tree... 50% Building dependency tree... 94% Building dependency tree... Done Reading state information... 0% Reading state information... 1% Reading state information... Done E: Unable to locate package libzstd-dev:arm64 E: Unable to locate package libssl-dev:arm64 E: Unable to locate package zlib1g-dev:arm64 E: Unable to locate package libbrotli-dev:arm64
ASSISTANT
Show reasoning
The system cannot find the arm64 versions of these development packages. I need to install the multiarch support first and then get the cross-compilation libraries. Let me first check if multiarch is enabled and then enable it if needed.
compile-bench> sudo dpkg --add-architecture arm64 && sudo apt update
0% [Working]
Hit:1 http://security.ubuntu.com/ubuntu jammy-security InRelease
0% [Waiting for headers]
Hit:2 http://archive.ubuntu.com/ubuntu jammy InRelease
0% [Waiting for headers]
0% [Waiting for headers]
0% [Waiting for headers] [Waiting for headers]
Get:3 http://archive.ubuntu.com/ubuntu jammy-updates InRelease [128 kB]
0% [3 InRelease 12.7 kB/128 kB 10%] [Waiting for headers]
Ign:4 http://security.ubuntu.com/ubuntu jammy-security/restricted arm64 Packages
0% [3 InRelease 15.6 kB/128 kB 12%]
Ign:5 http://security.ubuntu.com/ubuntu jammy-security/multiverse arm64 Packages
Ign:6 http://security.ubuntu.com/ubuntu jammy-security/universe arm64 Packages
Ign:7 http://security.ubuntu.com/ubuntu jammy-security/main arm64 Packages
0% [3 InRelease 41.7 kB/128 kB 33%]
Ign:4 http://security.ubuntu.com/ubuntu jammy-security/restricted arm64 Packages
Ign:5 http://security.ubuntu.com/ubuntu jammy-security/multiverse arm64 Packages
Ign:6 http://security.ubuntu.com/ubuntu jammy-security/universe arm64 Packages
0% [3 InRelease 76.4 kB/128 kB 60%]
0% [Waiting for headers] [Waiting for headers]
Ign:7 http://security.ubuntu.com/ubuntu jammy-security/main arm64 Packages
0% [Waiting for headers]
0% [Waiting for headers] [Connecting to security.ubuntu.com (185.125.190.36)]
Get:8 http://archive.ubuntu.com/ubuntu jammy-backports InRelease [127 kB]
0% [8 InRelease 2588 B/127 kB 2%] [Connecting to security.ubuntu.com (185.125.1
0% [Waiting for headers]
15% [Waiting for headers] [Waiting for headers]
Ign:4 http://security.ubuntu.com/ubuntu jammy-security/restricted arm64 Packages
15% [Waiting for headers] [Waiting for headers]
Ign:5 http://security.ubuntu.com/ubuntu jammy-security/multiverse arm64 Packages
15% [Waiting for headers] [Waiting for headers]
Ign:9 http://archive.ubuntu.com/ubuntu jammy/restricted arm64 Packages
Ign:10 http://archive.ubuntu.com/ubuntu jammy/universe arm64 Packages
Ign:11 http://archive.ubuntu.com/ubuntu jammy/multiverse arm64 Packages
Ign:12 http://archive.ubuntu.com/ub
[command output truncated]
ntu.com/ubuntu jammy-backports/main arm64 Packages
Err:9 http://archive.ubuntu.com/ubuntu jammy/restricted arm64 Packages
404 Not Found [IP: 185.125.190.82 80]
Ign:10 http://archive.ubuntu.com/ubuntu jammy/universe arm64 Packages
Ign:11 http://archive.ubuntu.com/ubuntu jammy/multiverse arm64 Packages
Ign:12 http://archive.ubuntu.com/ubuntu jammy/main arm64 Packages
19% [Waiting for headers]
Err:14 http://archive.ubuntu.com/ubuntu jammy-updates/multiverse arm64 Packages
404 Not Found [IP: 185.125.190.82 80]
Ign:15 http://archive.ubuntu.com/ubuntu jammy-updates/universe arm64 Packages
Ign:16 http://archive.ubuntu.com/ubuntu jammy-updates/restricted arm64 Packages
20% [Working]
Ign:17 http://archive.ubuntu.com/ubuntu jammy-updates/main arm64 Packages
20% [Waiting for headers]
Err:18 http://archive.ubuntu.com/ubuntu jammy-backports/universe arm64 Packages
404 Not Found [IP: 185.125.190.82 80]
Ign:19 http://archive.ubuntu.com/ubuntu jammy-backports/main arm64 Packages
20% [Working]
Fetched 3881 kB in 2s (1638 kB/s)
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 3%
Reading package lists... 3%
Reading package lists... 4%
Reading package lists... 4%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 52%
Reading package lists... 52%
Reading package lists... 67%
Reading package lists... 67%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 81%
Reading package lists... 81%
Reading package lists... 96%
Reading package lists... 96%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... Done
E: Failed to fetch http://security.ubuntu.com/ubuntu/dists/jammy-security/restricted/binary-arm64/Packages 404 Not Found [IP: 185.125.190.39 80]
E: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/jammy/restricted/binary-arm64/Packages 404 Not Found [IP: 185.125.190.82 80]
E: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/jammy-updates/multiverse/binary-arm64/Packages 404 Not Found [IP: 185.125.190.82 80]
E: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/jammy-backports/universe/binary-arm64/Packages 404 Not Found [IP: 185.125.190.82 80]
E: Some index files failed to download. They have been ignored, or old ones used instead.
↓ 41 lines
compile-bench> sudo dpkg --add-architecture arm64 && sudo apt update
0% [Working]
Hit:1 http://security.ubuntu.com/ubuntu jammy-security InRelease
0% [Waiting for headers]
Hit:2 http://archive.ubuntu.com/ubuntu jammy InRelease
0% [Waiting for headers]
0% [Waiting for headers]
0% [Waiting for headers] [Waiting for headers]
Get:3 http://archive.ubuntu.com/ubuntu jammy-updates InRelease [128 kB]
0% [3 InRelease 12.7 kB/128 kB 10%] [Waiting for headers]
Ign:4 http://security.ubuntu.com/ubuntu jammy-security/restricted arm64 Packages
0% [3 InRelease 15.6 kB/128 kB 12%]
Ign:5 http://security.ubuntu.com/ubuntu jammy-security/multiverse arm64 Packages
Ign:6 http://security.ubuntu.com/ubuntu jammy-security/universe arm64 Packages
Ign:7 http://security.ubuntu.com/ubuntu jammy-security/main arm64 Packages
0% [3 InRelease 41.7 kB/128 kB 33%]
Ign:4 http://security.ubuntu.com/ubuntu jammy-security/restricted arm64 Packages
Ign:5 http://security.ubuntu.com/ubuntu jammy-security/multiverse arm64 Packages
Ign:6 http://security.ubuntu.com/ubuntu jammy-security/universe arm64 Packages
0% [3 InRelease 76.4 kB/128 kB 60%]
0% [Waiting for headers] [Waiting for headers]
Ign:7 http://security.ubuntu.com/ubuntu jammy-security/main arm64 Packages
0% [Waiting for headers]
0% [Waiting for headers] [Connecting to security.ubuntu.com (185.125.190.36)]
Get:8 http://archive.ubuntu.com/ubuntu jammy-backports InRelease [127 kB]
0% [8 InRelease 2588 B/127 kB 2%] [Connecting to security.ubuntu.com (185.125.1
0% [Waiting for headers]
15% [Waiting for headers] [Waiting for headers]
Ign:4 http://security.ubuntu.com/ubuntu jammy-security/restricted arm64 Packages
15% [Waiting for headers] [Waiting for headers]
Ign:5 http://security.ubuntu.com/ubuntu jammy-security/multiverse arm64 Packages
15% [Waiting for headers] [Waiting for headers]
Ign:9 http://archive.ubuntu.com/ubuntu jammy/restricted arm64 Packages
Ign:10 http://archive.ubuntu.com/ubuntu jammy/universe arm64 Packages
Ign:11 http://archive.ubuntu.com/ubuntu jammy/multiverse arm64 Packages
Ign:12 http://archive.ubuntu.com/ub
[command output truncated]
ntu.com/ubuntu jammy-backports/main arm64 Packages
Err:9 http://archive.ubuntu.com/ubuntu jammy/restricted arm64 Packages
404 Not Found [IP: 185.125.190.82 80]
Ign:10 http://archive.ubuntu.com/ubuntu jammy/universe arm64 Packages
Ign:11 http://archive.ubuntu.com/ubuntu jammy/multiverse arm64 Packages
Ign:12 http://archive.ubuntu.com/ubuntu jammy/main arm64 Packages
19% [Waiting for headers]
Err:14 http://archive.ubuntu.com/ubuntu jammy-updates/multiverse arm64 Packages
404 Not Found [IP: 185.125.190.82 80]
Ign:15 http://archive.ubuntu.com/ubuntu jammy-updates/universe arm64 Packages
Ign:16 http://archive.ubuntu.com/ubuntu jammy-updates/restricted arm64 Packages
20% [Working]
Ign:17 http://archive.ubuntu.com/ubuntu jammy-updates/main arm64 Packages
20% [Waiting for headers]
Err:18 http://archive.ubuntu.com/ubuntu jammy-backports/universe arm64 Packages
404 Not Found [IP: 185.125.190.82 80]
Ign:19 http://archive.ubuntu.com/ubuntu jammy-backports/main arm64 Packages
20% [Working]
Fetched 3881 kB in 2s (1638 kB/s)
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 3%
Reading package lists... 3%
Reading package lists... 4%
Reading package lists... 4%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 52%
Reading package lists... 52%
Reading package lists... 67%
Reading package lists... 67%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 81%
Reading package lists... 81%
Reading package lists... 96%
Reading package lists... 96%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... Done
E: Failed to fetch http://security.ubuntu.com/ubuntu/dists/jammy-security/restricted/binary-arm64/Packages 404 Not Found [IP: 185.125.190.39 80]
E: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/jammy/restricted/binary-arm64/Packages 404 Not Found [IP: 185.125.190.82 80]
E: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/jammy-updates/multiverse/binary-arm64/Packages 404 Not Found [IP: 185.125.190.82 80]
E: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/jammy-backports/universe/binary-arm64/Packages 404 Not Found [IP: 185.125.190.82 80]
E: Some index files failed to download. They have been ignored, or old ones used instead.
ASSISTANT
Show reasoning
The arm64 architecture addition isn't working properly. Let me try a different approach - I'll install the cross-compilation dependencies and then build the static libraries for arm64 manually. Let me first install the native dependencies and then build the cross-compilation libraries.
compile-bench> sudo apt install -y libssl-dev zlib1g-dev libbrotli-dev libzstd-dev pkg-config make cmake automake autoconf libtool
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 3%
Reading package lists... 3%
Reading package lists... 4%
Reading package lists... 4%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 52%
Reading package lists... 52%
Reading package lists... 67%
Reading package lists... 67%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 81%
Reading package lists... 81%
Reading package lists... 96%
Reading package lists... 96%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... Done
Building dependency tree... 0%
Building dependency tree... 0%
Building dependency tree... 50%
Building dependency tree... 50%
Building dependency tree... Done
Reading state information... 0%
Reading state information... 1%
Reading state information... Done
make is already the newest version (4.3-4.1build1).
make set to manually installed.
The following additional packages will be installed:
autotools-dev cmake-data dh-elpa-helper emacsen-common libarchive13
libexpat1 libglib2.0-0 libglib2.0-data libicu70 libjsoncpp25 libltdl-dev
libltdl7 librhash0 libsigsegv2 libuv1 libxml2 m4 shared-mime-info
xdg-user-dirs
Suggested packages:
autoconf-archive gnu-standards autoconf-doc gettext cmake-doc ninja-build
cmake-format lrzip libtool-doc libssl-doc gfortran | fortran95-compiler
gcj-jdk m4-doc
The following NEW packages will be installed:
autoconf automake autotools-dev cmake cmake-data dh-elpa-helper
emacsen-common libarchive13 libbrotli-dev libexpat1 libglib2.0-0
libglib2.0-data libicu70 libjsoncpp25 libltdl-dev libltdl7 librhash0
libsigsegv2 libssl-dev libtool libuv1 libxml2 libzstd-dev m4 pkg-config
shared-mime-info xdg-user-dirs zlib1g-dev
0 upgraded, 28 newly installed, 0 to remove and 0 not upgraded.
Need to get 25.9 MB of archives.
After this operation, 101 MB of additional disk space will be used.
0% [Working]
Get:1 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libexpat1 amd64 2.4.7-1ubuntu0.6 [92.1 kB]
0% [1 libexpat1 14.2 kB/92.1 kB 15%]
1% [Working]
Get:2 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libglib2.0-0 amd64 2.72.4-0ubuntu2.6 [1467 kB]
1% [2 libglib2.0-0 4050 B/1467 kB 0%]
Get:3 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libglib2.0-data all 2.72.4-0ubuntu2.6 [4698 B]
7% [Waiting for headers]
Get:4 http://archive.ubuntu.com/ubuntu jam
[command output truncated]
libltdl7:amd64 (2.4.6-15build2) ...
Selecting previously unselected package libltdl-dev:amd64.
Preparing to unpack .../22-libltdl-dev_2.4.6-15build2_amd64.deb ...
Unpacking libltdl-dev:amd64 (2.4.6-15build2) ...
Selecting previously unselected package libssl-dev:amd64.
Preparing to unpack .../23-libssl-dev_3.0.2-0ubuntu1.19_amd64.deb ...
Unpacking libssl-dev:amd64 (3.0.2-0ubuntu1.19) ...
Selecting previously unselected package libtool.
Preparing to unpack .../24-libtool_2.4.6-15build2_all.deb ...
Unpacking libtool (2.4.6-15build2) ...
Selecting previously unselected package libzstd-dev:amd64.
Preparing to unpack .../25-libzstd-dev_1.4.8+dfsg-3build1_amd64.deb ...
Unpacking libzstd-dev:amd64 (1.4.8+dfsg-3build1) ...
Selecting previously unselected package pkg-config.
Preparing to unpack .../26-pkg-config_0.29.2-1ubuntu3_amd64.deb ...
Unpacking pkg-config (0.29.2-1ubuntu3) ...
Selecting previously unselected package zlib1g-dev:amd64.
Preparing to unpack .../27-zlib1g-dev_1%3a1.2.11.dfsg-2ubuntu9.2_amd64.deb ...
Unpacking zlib1g-dev:amd64 (1:1.2.11.dfsg-2ubuntu9.2) ...
Setting up libexpat1:amd64 (2.4.7-1ubuntu0.6) ...
Setting up libzstd-dev:amd64 (1.4.8+dfsg-3build1) ...
Setting up xdg-user-dirs (0.17-2ubuntu4) ...
Setting up libglib2.0-0:amd64 (2.72.4-0ubuntu2.6) ...
No schema files found: doing nothing.
Setting up autotools-dev (20220109.1) ...
Setting up libglib2.0-data (2.72.4-0ubuntu2.6) ...
Setting up libuv1:amd64 (1.43.0-1ubuntu0.1) ...
Setting up emacsen-common (3.0.4) ...
Setting up dh-elpa-helper (2.0.9ubuntu1) ...
Setting up libsigsegv2:amd64 (2.13-1ubuntu3) ...
Setting up libssl-dev:amd64 (3.0.2-0ubuntu1.19) ...
Setting up libjsoncpp25:amd64 (1.9.5-3) ...
Setting up pkg-config (0.29.2-1ubuntu3) ...
Setting up libltdl7:amd64 (2.4.6-15build2) ...
Setting up zlib1g-dev:amd64 (1:1.2.11.dfsg-2ubuntu9.2) ...
Setting up librhash0:amd64 (1.4.2-1ubuntu1) ...
Setting up cmake-data (3.22.1-1ubuntu1.22.04.2) ...
Setting up libbrotli-dev:amd64 (1.0.9-2build6) ...
Setting up libicu70:amd64 (70.1-2) ...
Setting up libtool (2.4.6-15build2) ...
Setting up m4 (1.4.18-5ubuntu2) ...
Setting up autoconf (2.71-2) ...
Setting up libxml2:amd64 (2.9.13+dfsg-1ubuntu0.9) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/automake.1.gz because associated file /usr/share/man/man1/automake-1.16.1.gz (of link group automake) doesn't exist
update-alternatives: warning: skip creation of /usr/share/man/man1/aclocal.1.gz because associated file /usr/share/man/man1/aclocal-1.16.1.gz (of link group automake) doesn't exist
Setting up libarchive13:amd64 (3.6.0-1ubuntu1.5) ...
Setting up libltdl-dev:amd64 (2.4.6-15build2) ...
Setting up shared-mime-info (2.1-2) ...
Setting up cmake (3.22.1-1ubuntu1.22.04.2) ...
Processing triggers for libc-bin (2.35-0ubuntu3.10) ...
↓ 81 lines
compile-bench> sudo apt install -y libssl-dev zlib1g-dev libbrotli-dev libzstd-dev pkg-config make cmake automake autoconf libtool
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 3%
Reading package lists... 3%
Reading package lists... 4%
Reading package lists... 4%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 52%
Reading package lists... 52%
Reading package lists... 67%
Reading package lists... 67%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 81%
Reading package lists... 81%
Reading package lists... 96%
Reading package lists... 96%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... Done
Building dependency tree... 0%
Building dependency tree... 0%
Building dependency tree... 50%
Building dependency tree... 50%
Building dependency tree... Done
Reading state information... 0%
Reading state information... 1%
Reading state information... Done
make is already the newest version (4.3-4.1build1).
make set to manually installed.
The following additional packages will be installed:
autotools-dev cmake-data dh-elpa-helper emacsen-common libarchive13
libexpat1 libglib2.0-0 libglib2.0-data libicu70 libjsoncpp25 libltdl-dev
libltdl7 librhash0 libsigsegv2 libuv1 libxml2 m4 shared-mime-info
xdg-user-dirs
Suggested packages:
autoconf-archive gnu-standards autoconf-doc gettext cmake-doc ninja-build
cmake-format lrzip libtool-doc libssl-doc gfortran | fortran95-compiler
gcj-jdk m4-doc
The following NEW packages will be installed:
autoconf automake autotools-dev cmake cmake-data dh-elpa-helper
emacsen-common libarchive13 libbrotli-dev libexpat1 libglib2.0-0
libglib2.0-data libicu70 libjsoncpp25 libltdl-dev libltdl7 librhash0
libsigsegv2 libssl-dev libtool libuv1 libxml2 libzstd-dev m4 pkg-config
shared-mime-info xdg-user-dirs zlib1g-dev
0 upgraded, 28 newly installed, 0 to remove and 0 not upgraded.
Need to get 25.9 MB of archives.
After this operation, 101 MB of additional disk space will be used.
0% [Working]
Get:1 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libexpat1 amd64 2.4.7-1ubuntu0.6 [92.1 kB]
0% [1 libexpat1 14.2 kB/92.1 kB 15%]
1% [Working]
Get:2 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libglib2.0-0 amd64 2.72.4-0ubuntu2.6 [1467 kB]
1% [2 libglib2.0-0 4050 B/1467 kB 0%]
Get:3 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libglib2.0-data all 2.72.4-0ubuntu2.6 [4698 B]
7% [Waiting for headers]
Get:4 http://archive.ubuntu.com/ubuntu jam
[command output truncated]
libltdl7:amd64 (2.4.6-15build2) ...
Selecting previously unselected package libltdl-dev:amd64.
Preparing to unpack .../22-libltdl-dev_2.4.6-15build2_amd64.deb ...
Unpacking libltdl-dev:amd64 (2.4.6-15build2) ...
Selecting previously unselected package libssl-dev:amd64.
Preparing to unpack .../23-libssl-dev_3.0.2-0ubuntu1.19_amd64.deb ...
Unpacking libssl-dev:amd64 (3.0.2-0ubuntu1.19) ...
Selecting previously unselected package libtool.
Preparing to unpack .../24-libtool_2.4.6-15build2_all.deb ...
Unpacking libtool (2.4.6-15build2) ...
Selecting previously unselected package libzstd-dev:amd64.
Preparing to unpack .../25-libzstd-dev_1.4.8+dfsg-3build1_amd64.deb ...
Unpacking libzstd-dev:amd64 (1.4.8+dfsg-3build1) ...
Selecting previously unselected package pkg-config.
Preparing to unpack .../26-pkg-config_0.29.2-1ubuntu3_amd64.deb ...
Unpacking pkg-config (0.29.2-1ubuntu3) ...
Selecting previously unselected package zlib1g-dev:amd64.
Preparing to unpack .../27-zlib1g-dev_1%3a1.2.11.dfsg-2ubuntu9.2_amd64.deb ...
Unpacking zlib1g-dev:amd64 (1:1.2.11.dfsg-2ubuntu9.2) ...
Setting up libexpat1:amd64 (2.4.7-1ubuntu0.6) ...
Setting up libzstd-dev:amd64 (1.4.8+dfsg-3build1) ...
Setting up xdg-user-dirs (0.17-2ubuntu4) ...
Setting up libglib2.0-0:amd64 (2.72.4-0ubuntu2.6) ...
No schema files found: doing nothing.
Setting up autotools-dev (20220109.1) ...
Setting up libglib2.0-data (2.72.4-0ubuntu2.6) ...
Setting up libuv1:amd64 (1.43.0-1ubuntu0.1) ...
Setting up emacsen-common (3.0.4) ...
Setting up dh-elpa-helper (2.0.9ubuntu1) ...
Setting up libsigsegv2:amd64 (2.13-1ubuntu3) ...
Setting up libssl-dev:amd64 (3.0.2-0ubuntu1.19) ...
Setting up libjsoncpp25:amd64 (1.9.5-3) ...
Setting up pkg-config (0.29.2-1ubuntu3) ...
Setting up libltdl7:amd64 (2.4.6-15build2) ...
Setting up zlib1g-dev:amd64 (1:1.2.11.dfsg-2ubuntu9.2) ...
Setting up librhash0:amd64 (1.4.2-1ubuntu1) ...
Setting up cmake-data (3.22.1-1ubuntu1.22.04.2) ...
Setting up libbrotli-dev:amd64 (1.0.9-2build6) ...
Setting up libicu70:amd64 (70.1-2) ...
Setting up libtool (2.4.6-15build2) ...
Setting up m4 (1.4.18-5ubuntu2) ...
Setting up autoconf (2.71-2) ...
Setting up libxml2:amd64 (2.9.13+dfsg-1ubuntu0.9) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/automake.1.gz because associated file /usr/share/man/man1/automake-1.16.1.gz (of link group automake) doesn't exist
update-alternatives: warning: skip creation of /usr/share/man/man1/aclocal.1.gz because associated file /usr/share/man/man1/aclocal-1.16.1.gz (of link group automake) doesn't exist
Setting up libarchive13:amd64 (3.6.0-1ubuntu1.5) ...
Setting up libltdl-dev:amd64 (2.4.6-15build2) ...
Setting up shared-mime-info (2.1-2) ...
Setting up cmake (3.22.1-1ubuntu1.22.04.2) ...
Processing triggers for libc-bin (2.35-0ubuntu3.10) ...
ASSISTANT
Show reasoning
Now I have all the necessary build tools. I need to create a directory for the build and set up the cross-compilation environment for ARM64. I need to build curl statically with SSL, brotli, zlib, and zstd support.
Let me create the build directory and configure curl for cross-compilation:
compile-bench> mkdir -p result && cd curl-8.16.0 && mkdir build
[empty output]
ASSISTANT
Show reasoning
Now I need to configure and build curl. Since this is a cross-compilation scenario and we want static libraries for arm64, I need to set up the environment properly. Let me check what dependencies we have and configure the build.
For static compilation with SSL support (TLS v1.3), brotli, zlib and zstd, I'll need to configure the build appropriately. Let me do this step by step.
First, let me configure the build with the proper flags for cross-compilation to arm64 with static linking.
compile-bench> cd curl-8.16.0/build && export CC=aarch64-linux-gnu-gcc && export CXX=aarch64-linux-gnu-g++ && ../configure --host=aarch64-linux-gnu --prefix=/home/peter/result --enable-static --disable-shared --with-ssl --enable-tls-srp --with-brotli --with-zlib --with-zstd --enable-ipv6 --enable-unix-sockets --enable-http --enable-ftp --enable-file --enable-ldap --enable-ldaps --enable-rtsp --enable-proxy --enable-dict --enable-telnet --enable-tftp --enable-pop3 --enable-imap --enable-smb --enable-smtp --enable-gopher --enable-mqtt --enable-manual CFLAGS="-O2 -static" LDFLAGS="-static" checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for aarch64-linux-gnu-ar... /usr/bin/aarch64-linux-gnu-ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for aarch64-linux-gnu-gcc... aarch64-linux-gnu-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether aarch64-linux-gnu-gcc accepts -g... yes
checking for aarch64-linux-gnu-gcc option to enable C11 features... none needed
checking whether aarch64-linux-gnu-gcc understands -c and -o together... yes
checking how to run the C preprocessor... aarch64-linux-gnu-gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for aarch64-linux-gnu-strip... aarch64-linux-gnu-strip
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of aarch64-linux-gnu-gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... aar
[command output truncated]
ing whether to support dict... yes
checking whether to support telnet... yes
checking whether to support tftp... yes
checking whether to support pop3... yes
checking whether to support imap... yes
checking whether to support smb... yes
checking whether to support smtp... yes
checking whether to support gopher... yes
checking whether to support mqtt... yes
checking whether to provide built-in manual... yes
checking whether to build documentation... yes
checking whether to enable generation of C code... yes
checking whether to use libgcc... no
checking if X/Open network library is required... no
checking for gethostbyname... yes
checking whether build target is a native Windows one... (cached) no
checking for proto/bsdsocket.h... no
checking for connect in libraries... yes
checking for sys/types.h... (cached) yes
checking for monotonic clock_gettime... yes
checking for clock_gettime in libraries... no additional lib required
checking for sys/types.h... (cached) yes
checking for raw monotonic clock_gettime... yes
checking for aarch64-linux-gnu-pkg-config... /usr/bin/aarch64-linux-gnu-pkg-config
checking for zlib options with pkg-config... no
checking for inflateEnd in -lz... no
checking for zlib.h... yes
checking for gzread in -lz... no
configure: WARNING: configure found only the libz header file, not the lib!
checking for aarch64-linux-gnu-pkg-config... (cached) /usr/bin/aarch64-linux-gnu-pkg-config
checking for libbrotlidec options with pkg-config... no
checking for aarch64-linux-gnu-pkg-config... (cached) /usr/bin/aarch64-linux-gnu-pkg-config
checking for libbrotlicommon options with pkg-config... no
checking for BrotliDecoderDecompress in -lbrotlidec... no
checking for brotli/decode.h... yes
checking for aarch64-linux-gnu-pkg-config... (cached) /usr/bin/aarch64-linux-gnu-pkg-config
checking for libzstd options with pkg-config... no
checking for ZSTD_createDStream in -lzstd... no
checking for zstd.h... yes
checking whether to enable IPv6... yes
checking if struct sockaddr_in6 has sin6_scope_id member... yes
checking if argv can be written to... no
configure: WARNING: the previous check could not be made default was used
checking if GSS-API support is requested... no
checking whether to enable Windows native SSL/TLS... no
checking whether to enable Amiga native SSL/TLS (AmiSSL v5)... no
checking for aarch64-linux-gnu-pkg-config... (cached) /usr/bin/aarch64-linux-gnu-pkg-config
checking for openssl options with pkg-config... no
checking for HMAC_Update in -lcrypto... no
checking for HMAC_Init_ex in -lcrypto... no
checking OpenSSL linking with -ldl... no
checking OpenSSL linking with -ldl and -lpthread... no
checking for SSL_set_quic_use_legacy_codepoint... no
checking for SSL_set_quic_tls_cbs... no
configure: OpenSSL version does not speak any known QUIC API
configure: OPT_OPENSSL: yes
configure: OPENSSL_ENABLED:
configure: error: --with-openssl was given but OpenSSL could not be detected
↓ 124 lines
compile-bench> cd curl-8.16.0/build && export CC=aarch64-linux-gnu-gcc && export CXX=aarch64-linux-gnu-g++ && ../configure --host=aarch64-linux-gnu --prefix=/home/peter/result --enable-static --disable-shared --with-ssl --enable-tls-srp --with-brotli --with-zlib --with-zstd --enable-ipv6 --enable-unix-sockets --enable-http --enable-ftp --enable-file --enable-ldap --enable-ldaps --enable-rtsp --enable-proxy --enable-dict --enable-telnet --enable-tftp --enable-pop3 --enable-imap --enable-smb --enable-smtp --enable-gopher --enable-mqtt --enable-manual CFLAGS="-O2 -static" LDFLAGS="-static"
checking whether to enable maintainer-specific portions of Makefiles... no checking whether make supports nested variables... yes checking whether to enable debug build options... no checking whether to enable compiler optimizer... (assumed) yes checking whether to enable strict compiler warnings... no checking whether to enable compiler warnings as errors... no checking whether to enable curl debug memory tracking... no checking whether to enable hiding of library internal symbols... yes checking whether to enable c-ares for DNS lookups... no checking whether to disable dependency on -lrt... (assumed no) checking whether to enable HTTPSRR support... no checking whether to enable ECH support... no checking whether to enable SSL session export support... no checking for path separator... : checking for sed... /usr/bin/sed checking for grep... /usr/bin/grep checking that grep -E works... yes checking for aarch64-linux-gnu-ar... /usr/bin/aarch64-linux-gnu-ar checking for a BSD-compatible install... /usr/bin/install -c checking for aarch64-linux-gnu-gcc... aarch64-linux-gnu-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether aarch64-linux-gnu-gcc accepts -g... yes checking for aarch64-linux-gnu-gcc option to enable C11 features... none needed checking whether aarch64-linux-gnu-gcc understands -c and -o together... yes checking how to run the C preprocessor... aarch64-linux-gnu-gcc -E checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for stdatomic.h... yes checking if _Atomic is available... yes checking for a sed that does not truncate output... (cached) /usr/bin/sed checking for code coverage support... no checking whether build environment is sane... yes checking for aarch64-linux-gnu-strip... aarch64-linux-gnu-strip checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of aarch64-linux-gnu-gcc... gcc3 checking curl version... 8.16.0 checking for perl... /usr/bin/perl checking for httpd... no checking for apache2... no checking for apxs... no configure: httpd/apache2 not in PATH, http tests disabled configure: apxs not in PATH, http tests disabled checking for danted... no checking for danted... no checking for nghttpx... no checking for caddy... no checking build system type... x86_64-pc-linux-gnu checking host system type... aar [command output truncated] ing whether to support dict... yes checking whether to support telnet... yes checking whether to support tftp... yes checking whether to support pop3... yes checking whether to support imap... yes checking whether to support smb... yes checking whether to support smtp... yes checking whether to support gopher... yes checking whether to support mqtt... yes checking whether to provide built-in manual... yes checking whether to build documentation... yes checking whether to enable generation of C code... yes checking whether to use libgcc... no checking if X/Open network library is required... no checking for gethostbyname... yes checking whether build target is a native Windows one... (cached) no checking for proto/bsdsocket.h... no checking for connect in libraries... yes checking for sys/types.h... (cached) yes checking for monotonic clock_gettime... yes checking for clock_gettime in libraries... no additional lib required checking for sys/types.h... (cached) yes checking for raw monotonic clock_gettime... yes checking for aarch64-linux-gnu-pkg-config... /usr/bin/aarch64-linux-gnu-pkg-config checking for zlib options with pkg-config... no checking for inflateEnd in -lz... no checking for zlib.h... yes checking for gzread in -lz... no configure: WARNING: configure found only the libz header file, not the lib! checking for aarch64-linux-gnu-pkg-config... (cached) /usr/bin/aarch64-linux-gnu-pkg-config checking for libbrotlidec options with pkg-config... no checking for aarch64-linux-gnu-pkg-config... (cached) /usr/bin/aarch64-linux-gnu-pkg-config checking for libbrotlicommon options with pkg-config... no checking for BrotliDecoderDecompress in -lbrotlidec... no checking for brotli/decode.h... yes checking for aarch64-linux-gnu-pkg-config... (cached) /usr/bin/aarch64-linux-gnu-pkg-config checking for libzstd options with pkg-config... no checking for ZSTD_createDStream in -lzstd... no checking for zstd.h... yes checking whether to enable IPv6... yes checking if struct sockaddr_in6 has sin6_scope_id member... yes checking if argv can be written to... no configure: WARNING: the previous check could not be made default was used checking if GSS-API support is requested... no checking whether to enable Windows native SSL/TLS... no checking whether to enable Amiga native SSL/TLS (AmiSSL v5)... no checking for aarch64-linux-gnu-pkg-config... (cached) /usr/bin/aarch64-linux-gnu-pkg-config checking for openssl options with pkg-config... no checking for HMAC_Update in -lcrypto... no checking for HMAC_Init_ex in -lcrypto... no checking OpenSSL linking with -ldl... no checking OpenSSL linking with -ldl and -lpthread... no checking for SSL_set_quic_use_legacy_codepoint... no checking for SSL_set_quic_tls_cbs... no configure: OpenSSL version does not speak any known QUIC API configure: OPT_OPENSSL: yes configure: OPENSSL_ENABLED: configure: error: --with-openssl was given but OpenSSL could not be detected
ASSISTANT
Show reasoning
I see the issue. The configure script is looking for OpenSSL libraries for the aarch64-linux-gnu target, but they're not found. I need to install the cross-compilation versions of these libraries. Since the multiarch setup didn't work properly earlier, I'll need to either:
1. Build the dependencies from source for aarch64
2. Try to get the cross-compilation libraries working
Let me try to install the cross-compilation dev packages:
compile-bench> sudo apt install -y libssl-dev zlib1g-dev libbrotli-dev libzstd-dev pkg-config
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 3%
Reading package lists... 3%
Reading package lists... 4%
Reading package lists... 4%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 52%
Reading package lists... 52%
Reading package lists... 67%
Reading package lists... 67%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 81%
Reading package lists... 81%
Reading package lists... 96%
Reading package lists... 96%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... Done
Building dependency tree... 0%
Building dependency tree... 0%
Building dependency tree... 50%
Building dependency tree... 50%
Building dependency tree... Done
Reading state information... 0%
Reading state information... 0%
Reading state information... Done
libbrotli-dev is already the newest version (1.0.9-2build6).
libzstd-dev is already the newest version (1.4.8+dfsg-3build1).
pkg-config is already the newest version (0.29.2-1ubuntu3).
libssl-dev is already the newest version (3.0.2-0ubuntu1.19).
zlib1g-dev is already the newest version (1:1.2.11.dfsg-2ubuntu9.2).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
↓ 10 lines
compile-bench> sudo apt install -y libssl-dev zlib1g-dev libbrotli-dev libzstd-dev pkg-config
Reading package lists... 0% Reading package lists... 0% Reading package lists... 0% Reading package lists... 3% Reading package lists... 3% Reading package lists... 4% Reading package lists... 4% Reading package lists... 42% Reading package lists... 42% Reading package lists... 42% Reading package lists... 42% Reading package lists... 52% Reading package lists... 52% Reading package lists... 67% Reading package lists... 67% Reading package lists... 71% Reading package lists... 71% Reading package lists... 72% Reading package lists... 72% Reading package lists... 72% Reading package lists... 72% Reading package lists... 72% Reading package lists... 72% Reading package lists... 81% Reading package lists... 81% Reading package lists... 96% Reading package lists... 96% Reading package lists... 99% Reading package lists... 99% Reading package lists... 99% Reading package lists... 99% Reading package lists... Done Building dependency tree... 0% Building dependency tree... 0% Building dependency tree... 50% Building dependency tree... 50% Building dependency tree... Done Reading state information... 0% Reading state information... 0% Reading state information... Done libbrotli-dev is already the newest version (1.0.9-2build6). libzstd-dev is already the newest version (1.4.8+dfsg-3build1). pkg-config is already the newest version (0.29.2-1ubuntu3). libssl-dev is already the newest version (3.0.2-0ubuntu1.19). zlib1g-dev is already the newest version (1:1.2.11.dfsg-2ubuntu9.2). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
ASSISTANT
Show reasoning
The issue is that the configure script can't find the libraries for the cross-compilation environment. It's looking for libraries that aren't available in the host system for the aarch64 architecture. I need to build the dependencies from source and provide them to curl, or use a different approach.
Let me try to build curl without the specific flags and see if it works better, then manually specify the paths to the libraries.
compile-bench> cd curl-8.16.0/build && export CC=aarch64-linux-gnu-gcc && export CXX=aarch64-linux-gnu-g++ && export PKG_CONFIG_PATH=/usr/lib/aarch64-linux-gnu/pkgconfig:/usr/lib/pkgconfig && ../configure --host=aarch64-linux-gnu --prefix=/home/peter/result --enable-static --disable-shared --with-ssl=/usr --with-brotli=/usr --with-zlib=/usr --with-zstd=/usr --enable-ipv6 --enable-unix-sockets --enable-http --enable-ftp --enable-file --enable-ldap --enable-ldaps --enable-rtsp --enable-proxy --enable-dict --enable-telnet --enable-tftp --enable-pop3 --enable-imap --enable-smb --enable-smtp --enable-gopher --enable-mqtt --enable-manual CFLAGS="-O2 -static" LDFLAGS="-static" checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for aarch64-linux-gnu-ar... /usr/bin/aarch64-linux-gnu-ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for aarch64-linux-gnu-gcc... aarch64-linux-gnu-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether aarch64-linux-gnu-gcc accepts -g... yes
checking for aarch64-linux-gnu-gcc option to enable C11 features... none needed
checking whether aarch64-linux-gnu-gcc understands -c and -o together... yes
checking how to run the C preprocessor... aarch64-linux-gnu-gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for aarch64-linux-gnu-strip... aarch64-linux-gnu-strip
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of aarch64-linux-gnu-gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... aar
[command output truncated]
ompiler options added: -Wno-system-headers
checking if compiler halts on compilation errors... yes
checking if compiler halts on negative sized arrays... yes
checking if compiler halts on function prototype mismatch... yes
checking if compiler supports hiding library internal symbols... yes
checking whether build target supports Win32 crypto API... no
checking whether to build libcurl and curl in "unity" mode... no
checking whether to support http... yes
checking whether to support ftp... yes
checking whether to support file... yes
checking whether to support IPFS... yes
checking whether to support ldap... yes
checking whether to support ldaps... yes
checking whether to support rtsp... yes
checking whether to support proxies... yes
checking whether to support dict... yes
checking whether to support telnet... yes
checking whether to support tftp... yes
checking whether to support pop3... yes
checking whether to support imap... yes
checking whether to support smb... yes
checking whether to support smtp... yes
checking whether to support gopher... yes
checking whether to support mqtt... yes
checking whether to provide built-in manual... yes
checking whether to build documentation... yes
checking whether to enable generation of C code... yes
checking whether to use libgcc... no
checking if X/Open network library is required... no
checking for gethostbyname... yes
checking whether build target is a native Windows one... (cached) no
checking for proto/bsdsocket.h... no
checking for connect in libraries... yes
checking for sys/types.h... (cached) yes
checking for monotonic clock_gettime... yes
checking for clock_gettime in libraries... no additional lib required
checking for sys/types.h... (cached) yes
checking for raw monotonic clock_gettime... yes
checking for zlib.h... yes
checking for gzread in -lz... no
configure: WARNING: configure found only the libz header file, not the lib!
checking for BrotliDecoderDecompress in -lbrotlidec... no
checking for brotli/decode.h... yes
checking for ZSTD_createDStream in -lzstd... no
checking for zstd.h... yes
checking whether to enable IPv6... yes
checking if struct sockaddr_in6 has sin6_scope_id member... yes
checking if argv can be written to... no
configure: WARNING: the previous check could not be made default was used
checking if GSS-API support is requested... no
checking whether to enable Windows native SSL/TLS... no
checking whether to enable Amiga native SSL/TLS (AmiSSL v5)... no
checking for HMAC_Update in -lcrypto... no
checking for HMAC_Init_ex in -lcrypto... no
checking OpenSSL linking with -ldl... no
checking OpenSSL linking with -ldl and -lpthread... no
checking for SSL_set_quic_use_legacy_codepoint... no
checking for SSL_set_quic_tls_cbs... no
configure: OpenSSL version does not speak any known QUIC API
configure: OPT_OPENSSL: /usr
configure: OPENSSL_ENABLED:
configure: error: --with-openssl was given but OpenSSL could not be detected
↓ 128 lines
compile-bench> cd curl-8.16.0/build && export CC=aarch64-linux-gnu-gcc && export CXX=aarch64-linux-gnu-g++ && export PKG_CONFIG_PATH=/usr/lib/aarch64-linux-gnu/pkgconfig:/usr/lib/pkgconfig && ../configure --host=aarch64-linux-gnu --prefix=/home/peter/result --enable-static --disable-shared --with-ssl=/usr --with-brotli=/usr --with-zlib=/usr --with-zstd=/usr --enable-ipv6 --enable-unix-sockets --enable-http --enable-ftp --enable-file --enable-ldap --enable-ldaps --enable-rtsp --enable-proxy --enable-dict --enable-telnet --enable-tftp --enable-pop3 --enable-imap --enable-smb --enable-smtp --enable-gopher --enable-mqtt --enable-manual CFLAGS="-O2 -static" LDFLAGS="-static"
checking whether to enable maintainer-specific portions of Makefiles... no checking whether make supports nested variables... yes checking whether to enable debug build options... no checking whether to enable compiler optimizer... (assumed) yes checking whether to enable strict compiler warnings... no checking whether to enable compiler warnings as errors... no checking whether to enable curl debug memory tracking... no checking whether to enable hiding of library internal symbols... yes checking whether to enable c-ares for DNS lookups... no checking whether to disable dependency on -lrt... (assumed no) checking whether to enable HTTPSRR support... no checking whether to enable ECH support... no checking whether to enable SSL session export support... no checking for path separator... : checking for sed... /usr/bin/sed checking for grep... /usr/bin/grep checking that grep -E works... yes checking for aarch64-linux-gnu-ar... /usr/bin/aarch64-linux-gnu-ar checking for a BSD-compatible install... /usr/bin/install -c checking for aarch64-linux-gnu-gcc... aarch64-linux-gnu-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether aarch64-linux-gnu-gcc accepts -g... yes checking for aarch64-linux-gnu-gcc option to enable C11 features... none needed checking whether aarch64-linux-gnu-gcc understands -c and -o together... yes checking how to run the C preprocessor... aarch64-linux-gnu-gcc -E checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for stdatomic.h... yes checking if _Atomic is available... yes checking for a sed that does not truncate output... (cached) /usr/bin/sed checking for code coverage support... no checking whether build environment is sane... yes checking for aarch64-linux-gnu-strip... aarch64-linux-gnu-strip checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of aarch64-linux-gnu-gcc... gcc3 checking curl version... 8.16.0 checking for perl... /usr/bin/perl checking for httpd... no checking for apache2... no checking for apxs... no configure: httpd/apache2 not in PATH, http tests disabled configure: apxs not in PATH, http tests disabled checking for danted... no checking for danted... no checking for nghttpx... no checking for caddy... no checking build system type... x86_64-pc-linux-gnu checking host system type... aar [command output truncated] ompiler options added: -Wno-system-headers checking if compiler halts on compilation errors... yes checking if compiler halts on negative sized arrays... yes checking if compiler halts on function prototype mismatch... yes checking if compiler supports hiding library internal symbols... yes checking whether build target supports Win32 crypto API... no checking whether to build libcurl and curl in "unity" mode... no checking whether to support http... yes checking whether to support ftp... yes checking whether to support file... yes checking whether to support IPFS... yes checking whether to support ldap... yes checking whether to support ldaps... yes checking whether to support rtsp... yes checking whether to support proxies... yes checking whether to support dict... yes checking whether to support telnet... yes checking whether to support tftp... yes checking whether to support pop3... yes checking whether to support imap... yes checking whether to support smb... yes checking whether to support smtp... yes checking whether to support gopher... yes checking whether to support mqtt... yes checking whether to provide built-in manual... yes checking whether to build documentation... yes checking whether to enable generation of C code... yes checking whether to use libgcc... no checking if X/Open network library is required... no checking for gethostbyname... yes checking whether build target is a native Windows one... (cached) no checking for proto/bsdsocket.h... no checking for connect in libraries... yes checking for sys/types.h... (cached) yes checking for monotonic clock_gettime... yes checking for clock_gettime in libraries... no additional lib required checking for sys/types.h... (cached) yes checking for raw monotonic clock_gettime... yes checking for zlib.h... yes checking for gzread in -lz... no configure: WARNING: configure found only the libz header file, not the lib! checking for BrotliDecoderDecompress in -lbrotlidec... no checking for brotli/decode.h... yes checking for ZSTD_createDStream in -lzstd... no checking for zstd.h... yes checking whether to enable IPv6... yes checking if struct sockaddr_in6 has sin6_scope_id member... yes checking if argv can be written to... no configure: WARNING: the previous check could not be made default was used checking if GSS-API support is requested... no checking whether to enable Windows native SSL/TLS... no checking whether to enable Amiga native SSL/TLS (AmiSSL v5)... no checking for HMAC_Update in -lcrypto... no checking for HMAC_Init_ex in -lcrypto... no checking OpenSSL linking with -ldl... no checking OpenSSL linking with -ldl and -lpthread... no checking for SSL_set_quic_use_legacy_codepoint... no checking for SSL_set_quic_tls_cbs... no configure: OpenSSL version does not speak any known QUIC API configure: OPT_OPENSSL: /usr configure: OPENSSL_ENABLED: configure: error: --with-openssl was given but OpenSSL could not be detected
ASSISTANT
Show reasoning
The issue is that the configure script can't find the libraries for the cross-compilation target. Since we're cross-compiling for aarch64, we need to tell configure where to find the cross-compiled libraries. Let me try a different approach - we need to build the dependencies statically or find a way to point to the correct cross-compilation libraries.
Let me check what's available for cross-compilation and try to build curl with static linking by specifying the library paths explicitly.
compile-bench> ls /usr/lib/aarch64-linux-gnu/ | grep -E "(ssl|crypto|z|brotli|zstd)"
[empty output]
ASSISTANT
Show reasoning
The issue is that I need cross-compilation libraries for arm64. Let me try to find what's available for arm64 cross-compilation. I need to install the development packages for cross-compilation.
compile-bench> apt search -n "*-aarch64-linux-gnu" | grep -E "(dev|ssl|crypto|z|brotli|zstd)" | head -20
WARNING: apt does not have a stable CLI interface. Use with caution in scripts.
E: Regex compilation error
↓ 4 lines
compile-bench> apt search -n "*-aarch64-linux-gnu" | grep -E "(dev|ssl|crypto|z|brotli|zstd)" | head -20
WARNING: apt does not have a stable CLI interface. Use with caution in scripts. E: Regex compilation error
ASSISTANT
compile-bench> apt search *-aarch64-linux-gnu | grep -i dev
WARNING: apt does not have a stable CLI interface. Use with caution in scripts.
E: Regex compilation error
↓ 4 lines
compile-bench> apt search *-aarch64-linux-gnu | grep -i dev
WARNING: apt does not have a stable CLI interface. Use with caution in scripts. E: Regex compilation error
ASSISTANT
compile-bench> apt list --installed | grep aarch64
WARNING: apt does not have a stable CLI interface. Use with caution in scripts.
binutils-aarch64-linux-gnu/jammy-updates,jammy-security,now 2.38-4ubuntu2.8 amd64 [installed]
cpp-11-aarch64-linux-gnu/jammy-updates,jammy-security,now 11.4.0-1ubuntu1~22.04cross1 amd64 [installed,automatic]
cpp-aarch64-linux-gnu/jammy,now 4:11.2.0-1ubuntu1 amd64 [installed,automatic]
g++-11-aarch64-linux-gnu/jammy-updates,jammy-security,now 11.4.0-1ubuntu1~22.04cross1 amd64 [installed,automatic]
g++-aarch64-linux-gnu/jammy,now 4:11.2.0-1ubuntu1 amd64 [installed]
gcc-11-aarch64-linux-gnu-base/jammy-updates,jammy-security,now 11.4.0-1ubuntu1~22.04cross1 amd64 [installed,automatic]
gcc-11-aarch64-linux-gnu/jammy-updates,jammy-security,now 11.4.0-1ubuntu1~22.04cross1 amd64 [installed,automatic]
gcc-aarch64-linux-gnu/jammy,now 4:11.2.0-1ubuntu1 amd64 [installed]
↓ 11 lines
compile-bench> apt list --installed | grep aarch64
WARNING: apt does not have a stable CLI interface. Use with caution in scripts. binutils-aarch64-linux-gnu/jammy-updates,jammy-security,now 2.38-4ubuntu2.8 amd64 [installed] cpp-11-aarch64-linux-gnu/jammy-updates,jammy-security,now 11.4.0-1ubuntu1~22.04cross1 amd64 [installed,automatic] cpp-aarch64-linux-gnu/jammy,now 4:11.2.0-1ubuntu1 amd64 [installed,automatic] g++-11-aarch64-linux-gnu/jammy-updates,jammy-security,now 11.4.0-1ubuntu1~22.04cross1 amd64 [installed,automatic] g++-aarch64-linux-gnu/jammy,now 4:11.2.0-1ubuntu1 amd64 [installed] gcc-11-aarch64-linux-gnu-base/jammy-updates,jammy-security,now 11.4.0-1ubuntu1~22.04cross1 amd64 [installed,automatic] gcc-11-aarch64-linux-gnu/jammy-updates,jammy-security,now 11.4.0-1ubuntu1~22.04cross1 amd64 [installed,automatic] gcc-aarch64-linux-gnu/jammy,now 4:11.2.0-1ubuntu1 amd64 [installed]
ASSISTANT
compile-bench> apt search libssl-dev
Sorting... 0%
Sorting... 0%
Sorting... 0%
Sorting... Done
Full Text Search... 50%
Full Text Search... 50%
Full Text Search... Done
libssl-dev/jammy-updates,jammy-security,now 3.0.2-0ubuntu1.19 amd64 [installed]
Secure Sockets Layer toolkit - development files
↓ 5 lines
compile-bench> apt search libssl-dev
Sorting... 0% Sorting... 0% Sorting... 0% Sorting... Done Full Text Search... 50% Full Text Search... 50% Full Text Search... Done libssl-dev/jammy-updates,jammy-security,now 3.0.2-0ubuntu1.19 amd64 [installed] Secure Sockets Layer toolkit - development files
ASSISTANT
Show reasoning
The packages installed are for amd64 architecture, not arm64. I need to cross-compile from source the dependencies or find a different approach. Let me check if there are cross-compilation development packages available. Since I can't find arm64 development packages easily, I'll try a different approach - I'll build the dependencies from source first, then build curl statically.
Let me start by downloading and building the dependencies from source for arm64.
compile-bench> apt search lib | grep -i "cross"
WARNING: apt does not have a stable CLI interface. Use with caution in scripts.
Cross Implementation AMOP library
Library for cross-referencing commands in Emacs
efficient cross platform serialization library - compiler
efficient cross platform serialization library - cmake files
g++-10-multilib-i686-linux-gnu/jammy-updates,jammy-security 10.5.0-1ubuntu1~22.04cross1 amd64
GNU C++ compiler (multilib support) (cross compiler for i386 architecture)
g++-10-multilib-mips-linux-gnu/jammy 10.3.0-1ubuntu1cross2 amd64
GNU C++ compiler (multilib support) (cross compiler for mips architecture)
g++-10-multilib-mips64-linux-gnuabi64/jammy 10.3.0-1ubuntu1cross2 amd64
GNU C++ compiler (multilib support) (cross compiler for mips64 architecture)
g++-10-multilib-mips64el-linux-gnuabi64/jammy 10.3.0-1ubuntu1cross2 amd64
GNU C++ compiler (multilib support) (cross compiler for mips64el architecture)
g++-10-multilib-mipsel-linux-gnu/jammy 10.3.0-1ubuntu1cross2 amd64
GNU C++ compiler (multilib support) (cross compiler for mipsel architecture)
g++-10-multilib-mipsisa32r6-linux-gnu/jammy 10.3.0-1ubuntu1cross2 amd64
GNU C++ compiler (multilib support) (cross compiler for mipsr6 architecture)
g++-10-multilib-mipsisa32r6el-linux-gnu/jammy 10.3.0-1ubuntu1cross2 amd64
GNU C++ compiler (multilib support) (cross compiler for mipsr6el architecture)
g++-10-multilib-mipsisa64r6-linux-gnuabi64/jammy 10.3.0-1ubuntu1cross2 amd64
GNU C++ compiler (multilib support) (cross compiler for mips64r6 architecture)
g++-10-multilib-mipsisa64r6el-linux-gnuabi64/jammy 10.3.0-1ubuntu1cross2 amd64
GNU C++ compiler (multilib support) (cross compiler for mips64r6el architecture)
g++-10-multilib-powerpc-linux-gnu/jammy-updates,jammy-security 10.5.0-1ubuntu1~22.04cross1 amd64
GNU C++ compiler (multilib support) (cross compiler for powerpc architecture)
g++-10-multilib-powerpc64-linux-gnu/jammy-updates,jammy-security 10.5.0-1ubuntu1~22.04cross1 amd64
GNU C++ compiler (multilib support) (cross compiler for ppc64 architecture)
g++-10-multilib-s390x-linux-gnu/jammy-updates,jammy-security 10.5.0-1ubuntu1~22.04cross1 amd64
GNU C++ compiler (multilib support) (cross compiler for s390x architecture)
g++-10-multilib-sparc64-linux-gnu/jammy-updates,jammy-security 10.5.0-1ubuntu1~22.04cross1 amd64
GNU C++ compiler (multilib support) (cross compiler for sparc64 architecture)
g++-10-multilib-x86-64-linux-gnux32/jammy-updates,jammy-security 10.5.0-1ubuntu1~22.04cross1 amd64
GNU C++ compiler (multilib support) (cross compiler for x32 architecture)
g++-11-multilib-i686-linux-gnu/jammy-updates,jammy-security 11.4.0-1ubuntu1~22.04cross1 amd64
GNU C++ compiler (multilib support) (cross compiler for i386 architecture)
g++-11-multilib-powerpc-linux-gnu/jammy-updates,jammy-security 11.4.0-1ubuntu1~22.04cross1 amd64
GNU C++ compiler (multilib support) (cross compiler for powerpc architecture)
g++-11-multilib-powerpc64-linux-gnu/jammy-updates,ja
[command output truncated]
rnel Headers for development (for cross-compiling)
linux-libc-dev-m68k-cross/jammy 5.15.0-22.22cross4 all
Linux Kernel Headers for development (for cross-compiling)
linux-libc-dev-mips-cross/jammy 5.15.0-18.18cross1 all
Linux Kernel Headers for development (for cross-compiling)
linux-libc-dev-mips64-cross/jammy 5.15.0-18.18cross1 all
Linux Kernel Headers for development (for cross-compiling)
linux-libc-dev-mips64el-cross/jammy 5.15.0-18.18cross1 all
Linux Kernel Headers for development (for cross-compiling)
linux-libc-dev-mips64r6-cross/jammy 5.15.0-18.18cross1 all
Linux Kernel Headers for development (for cross-compiling)
linux-libc-dev-mips64r6el-cross/jammy 5.15.0-18.18cross1 all
Linux Kernel Headers for development (for cross-compiling)
linux-libc-dev-mipsel-cross/jammy 5.15.0-18.18cross1 all
Linux Kernel Headers for development (for cross-compiling)
linux-libc-dev-mipsn32-cross/jammy 5.15.0-18.18cross1 all
Linux Kernel Headers for development (for cross-compiling)
linux-libc-dev-mipsn32el-cross/jammy 5.15.0-18.18cross1 all
Linux Kernel Headers for development (for cross-compiling)
linux-libc-dev-mipsn32r6-cross/jammy 5.15.0-18.18cross1 all
Linux Kernel Headers for development (for cross-compiling)
linux-libc-dev-mipsn32r6el-cross/jammy 5.15.0-18.18cross1 all
Linux Kernel Headers for development (for cross-compiling)
linux-libc-dev-mipsr6-cross/jammy 5.15.0-18.18cross1 all
Linux Kernel Headers for development (for cross-compiling)
linux-libc-dev-mipsr6el-cross/jammy 5.15.0-18.18cross1 all
Linux Kernel Headers for development (for cross-compiling)
linux-libc-dev-powerpc-cross/jammy 5.15.0-22.22cross3 all
Linux Kernel Headers for development (for cross-compiling)
linux-libc-dev-ppc64-cross/jammy 5.15.0-22.22cross4 all
Linux Kernel Headers for development (for cross-compiling)
linux-libc-dev-ppc64el-cross/jammy 5.15.0-22.22cross3 all
Linux Kernel Headers for development (for cross-compiling)
linux-libc-dev-riscv64-cross/jammy 5.15.0-22.22cross4 all
Linux Kernel Headers for development (for cross-compiling)
linux-libc-dev-s390x-cross/jammy 5.15.0-22.22cross3 all
Linux Kernel Headers for development (for cross-compiling)
linux-libc-dev-sh4-cross/jammy 5.15.0-22.22cross4 all
Linux Kernel Headers for development (for cross-compiling)
linux-libc-dev-sparc64-cross/jammy 5.15.0-22.22cross4 all
Linux Kernel Headers for development (for cross-compiling)
linux-libc-dev-x32-cross/jammy 5.15.0-22.22cross4 all
Linux Kernel Headers for development (for cross-compiling)
Immediate is a cross browser microtask library
python3-crossrefapi/jammy 1.5.0-2 all
Library with functions to iterate through the Crossref API (Python 3)
efficient cross platform serialization library - Python bindings
cross-platform windowing and multimedia library (Python 3)
cross-platform path manipulation library for Python
Library providing cross-platform terminal screen size detection
↓ 91 lines
compile-bench> apt search lib | grep -i "cross"
WARNING: apt does not have a stable CLI interface. Use with caution in scripts. Cross Implementation AMOP library Library for cross-referencing commands in Emacs efficient cross platform serialization library - compiler efficient cross platform serialization library - cmake files g++-10-multilib-i686-linux-gnu/jammy-updates,jammy-security 10.5.0-1ubuntu1~22.04cross1 amd64 GNU C++ compiler (multilib support) (cross compiler for i386 architecture) g++-10-multilib-mips-linux-gnu/jammy 10.3.0-1ubuntu1cross2 amd64 GNU C++ compiler (multilib support) (cross compiler for mips architecture) g++-10-multilib-mips64-linux-gnuabi64/jammy 10.3.0-1ubuntu1cross2 amd64 GNU C++ compiler (multilib support) (cross compiler for mips64 architecture) g++-10-multilib-mips64el-linux-gnuabi64/jammy 10.3.0-1ubuntu1cross2 amd64 GNU C++ compiler (multilib support) (cross compiler for mips64el architecture) g++-10-multilib-mipsel-linux-gnu/jammy 10.3.0-1ubuntu1cross2 amd64 GNU C++ compiler (multilib support) (cross compiler for mipsel architecture) g++-10-multilib-mipsisa32r6-linux-gnu/jammy 10.3.0-1ubuntu1cross2 amd64 GNU C++ compiler (multilib support) (cross compiler for mipsr6 architecture) g++-10-multilib-mipsisa32r6el-linux-gnu/jammy 10.3.0-1ubuntu1cross2 amd64 GNU C++ compiler (multilib support) (cross compiler for mipsr6el architecture) g++-10-multilib-mipsisa64r6-linux-gnuabi64/jammy 10.3.0-1ubuntu1cross2 amd64 GNU C++ compiler (multilib support) (cross compiler for mips64r6 architecture) g++-10-multilib-mipsisa64r6el-linux-gnuabi64/jammy 10.3.0-1ubuntu1cross2 amd64 GNU C++ compiler (multilib support) (cross compiler for mips64r6el architecture) g++-10-multilib-powerpc-linux-gnu/jammy-updates,jammy-security 10.5.0-1ubuntu1~22.04cross1 amd64 GNU C++ compiler (multilib support) (cross compiler for powerpc architecture) g++-10-multilib-powerpc64-linux-gnu/jammy-updates,jammy-security 10.5.0-1ubuntu1~22.04cross1 amd64 GNU C++ compiler (multilib support) (cross compiler for ppc64 architecture) g++-10-multilib-s390x-linux-gnu/jammy-updates,jammy-security 10.5.0-1ubuntu1~22.04cross1 amd64 GNU C++ compiler (multilib support) (cross compiler for s390x architecture) g++-10-multilib-sparc64-linux-gnu/jammy-updates,jammy-security 10.5.0-1ubuntu1~22.04cross1 amd64 GNU C++ compiler (multilib support) (cross compiler for sparc64 architecture) g++-10-multilib-x86-64-linux-gnux32/jammy-updates,jammy-security 10.5.0-1ubuntu1~22.04cross1 amd64 GNU C++ compiler (multilib support) (cross compiler for x32 architecture) g++-11-multilib-i686-linux-gnu/jammy-updates,jammy-security 11.4.0-1ubuntu1~22.04cross1 amd64 GNU C++ compiler (multilib support) (cross compiler for i386 architecture) g++-11-multilib-powerpc-linux-gnu/jammy-updates,jammy-security 11.4.0-1ubuntu1~22.04cross1 amd64 GNU C++ compiler (multilib support) (cross compiler for powerpc architecture) g++-11-multilib-powerpc64-linux-gnu/jammy-updates,ja [command output truncated] rnel Headers for development (for cross-compiling) linux-libc-dev-m68k-cross/jammy 5.15.0-22.22cross4 all Linux Kernel Headers for development (for cross-compiling) linux-libc-dev-mips-cross/jammy 5.15.0-18.18cross1 all Linux Kernel Headers for development (for cross-compiling) linux-libc-dev-mips64-cross/jammy 5.15.0-18.18cross1 all Linux Kernel Headers for development (for cross-compiling) linux-libc-dev-mips64el-cross/jammy 5.15.0-18.18cross1 all Linux Kernel Headers for development (for cross-compiling) linux-libc-dev-mips64r6-cross/jammy 5.15.0-18.18cross1 all Linux Kernel Headers for development (for cross-compiling) linux-libc-dev-mips64r6el-cross/jammy 5.15.0-18.18cross1 all Linux Kernel Headers for development (for cross-compiling) linux-libc-dev-mipsel-cross/jammy 5.15.0-18.18cross1 all Linux Kernel Headers for development (for cross-compiling) linux-libc-dev-mipsn32-cross/jammy 5.15.0-18.18cross1 all Linux Kernel Headers for development (for cross-compiling) linux-libc-dev-mipsn32el-cross/jammy 5.15.0-18.18cross1 all Linux Kernel Headers for development (for cross-compiling) linux-libc-dev-mipsn32r6-cross/jammy 5.15.0-18.18cross1 all Linux Kernel Headers for development (for cross-compiling) linux-libc-dev-mipsn32r6el-cross/jammy 5.15.0-18.18cross1 all Linux Kernel Headers for development (for cross-compiling) linux-libc-dev-mipsr6-cross/jammy 5.15.0-18.18cross1 all Linux Kernel Headers for development (for cross-compiling) linux-libc-dev-mipsr6el-cross/jammy 5.15.0-18.18cross1 all Linux Kernel Headers for development (for cross-compiling) linux-libc-dev-powerpc-cross/jammy 5.15.0-22.22cross3 all Linux Kernel Headers for development (for cross-compiling) linux-libc-dev-ppc64-cross/jammy 5.15.0-22.22cross4 all Linux Kernel Headers for development (for cross-compiling) linux-libc-dev-ppc64el-cross/jammy 5.15.0-22.22cross3 all Linux Kernel Headers for development (for cross-compiling) linux-libc-dev-riscv64-cross/jammy 5.15.0-22.22cross4 all Linux Kernel Headers for development (for cross-compiling) linux-libc-dev-s390x-cross/jammy 5.15.0-22.22cross3 all Linux Kernel Headers for development (for cross-compiling) linux-libc-dev-sh4-cross/jammy 5.15.0-22.22cross4 all Linux Kernel Headers for development (for cross-compiling) linux-libc-dev-sparc64-cross/jammy 5.15.0-22.22cross4 all Linux Kernel Headers for development (for cross-compiling) linux-libc-dev-x32-cross/jammy 5.15.0-22.22cross4 all Linux Kernel Headers for development (for cross-compiling) Immediate is a cross browser microtask library python3-crossrefapi/jammy 1.5.0-2 all Library with functions to iterate through the Crossref API (Python 3) efficient cross platform serialization library - Python bindings cross-platform windowing and multimedia library (Python 3) cross-platform path manipulation library for Python Library providing cross-platform terminal screen size detection
ASSISTANT
compile-bench> apt search "*-dev-arm64-cross" | grep -E "(ssl|crypto|z|brotli|zstd)"
WARNING: apt does not have a stable CLI interface. Use with caution in scripts.
E: Regex compilation error
↓ 4 lines
compile-bench> apt search "*-dev-arm64-cross" | grep -E "(ssl|crypto|z|brotli|zstd)"
WARNING: apt does not have a stable CLI interface. Use with caution in scripts. E: Regex compilation error
ASSISTANT
compile-bench> apt search libssl
Sorting... 0%
Sorting... 0%
Sorting... 0%
Sorting... Done
Full Text Search... 50%
Full Text Search... 50%
Full Text Search... Done
libssl-dev/jammy-updates,jammy-security,now 3.0.2-0ubuntu1.19 amd64 [installed]
Secure Sockets Layer toolkit - development files
libssl-doc/jammy-updates,jammy-security 3.0.2-0ubuntu1.19 all
Secure Sockets Layer toolkit - development documentation
libssl-ocaml/jammy 0.5.10-1build2 amd64
OCaml bindings for OpenSSL (runtime)
libssl-ocaml-dev/jammy 0.5.10-1build2 amd64
OCaml bindings for OpenSSL
libssl-utils-clojure/jammy 3.3.0-1 all
library for SSL certificate management on the JVM
libssl3/jammy-updates,jammy-security,now 3.0.2-0ubuntu1.19 amd64 [installed]
Secure Sockets Layer toolkit - shared libraries
↓ 20 lines
compile-bench> apt search libssl
Sorting... 0% Sorting... 0% Sorting... 0% Sorting... Done Full Text Search... 50% Full Text Search... 50% Full Text Search... Done libssl-dev/jammy-updates,jammy-security,now 3.0.2-0ubuntu1.19 amd64 [installed] Secure Sockets Layer toolkit - development files libssl-doc/jammy-updates,jammy-security 3.0.2-0ubuntu1.19 all Secure Sockets Layer toolkit - development documentation libssl-ocaml/jammy 0.5.10-1build2 amd64 OCaml bindings for OpenSSL (runtime) libssl-ocaml-dev/jammy 0.5.10-1build2 amd64 OCaml bindings for OpenSSL libssl-utils-clojure/jammy 3.3.0-1 all library for SSL certificate management on the JVM libssl3/jammy-updates,jammy-security,now 3.0.2-0ubuntu1.19 amd64 [installed] Secure Sockets Layer toolkit - shared libraries
ASSISTANT
Show reasoning
Let me try to check if there are any cross-compilation packages available. I need to install the cross-compilation libraries. Let me try a different approach.
compile-bench> apt list --all-versions | grep -i "cross" | grep -E "(ssl|crypto|z|brotli|zstd)" | head -10
WARNING: apt does not have a stable CLI interface. Use with caution in scripts.
librust-crossbeam-epoch+lazy-static-dev/jammy 0.8.2-2 amd64
librust-crossbeam-utils+lazy-static-dev/jammy 0.8.5-2 amd64
librust-crossbeam-utils-0.7+lazy-static-dev/jammy 0.7.2-3 amd64
↓ 6 lines
compile-bench> apt list --all-versions | grep -i "cross" | grep -E "(ssl|crypto|z|brotli|zstd)" | head -10
WARNING: apt does not have a stable CLI interface. Use with caution in scripts. librust-crossbeam-epoch+lazy-static-dev/jammy 0.8.2-2 amd64 librust-crossbeam-utils+lazy-static-dev/jammy 0.8.5-2 amd64 librust-crossbeam-utils-0.7+lazy-static-dev/jammy 0.7.2-3 amd64
ASSISTANT
Show reasoning
The issue is that Ubuntu doesn't provide cross-compilation development packages for SSL/zlib/brotli/zstd directly. I need to build these libraries from source as static libraries for arm64, or find another approach.
Let me try a different approach. I'll build the required libraries from source first, then build curl against them. But first, let me check if there are any available cross-compilation packages that I'm missing.
Actually, let me try to see if I can use the existing libraries by providing the correct paths. The issue might be that I need to tell configure where to find the cross-compiled libraries.
Let me try to see what's actually available for cross-compilation:
compile-bench> find /usr -name "*ssl*" -type f | grep -v doc | head -10 /usr/bin/openssl
/usr/lib/x86_64-linux-gnu/libssl.so.3
/usr/lib/x86_64-linux-gnu/pkgconfig/libssl.pc
/usr/lib/x86_64-linux-gnu/pkgconfig/openssl.pc
/usr/lib/x86_64-linux-gnu/libssl.a
/usr/include/x86_64-linux-gnu/openssl/opensslconf.h
/usr/include/openssl/opensslv.h
/usr/include/openssl/ossl_typ.h
/usr/include/openssl/ssl.h
/usr/include/openssl/prov_ssl.h
↓ 11 lines
compile-bench> find /usr -name "*ssl*" -type f | grep -v doc | head -10
/usr/bin/openssl /usr/lib/x86_64-linux-gnu/libssl.so.3 /usr/lib/x86_64-linux-gnu/pkgconfig/libssl.pc /usr/lib/x86_64-linux-gnu/pkgconfig/openssl.pc /usr/lib/x86_64-linux-gnu/libssl.a /usr/include/x86_64-linux-gnu/openssl/opensslconf.h /usr/include/openssl/opensslv.h /usr/include/openssl/ossl_typ.h /usr/include/openssl/ssl.h /usr/include/openssl/prov_ssl.h
ASSISTANT
Show reasoning
The issue is that we need to build static versions of the dependencies first. Let me try a different approach - I'll build static versions of OpenSSL, zlib, brotli, and zstd specifically for arm64 cross-compilation, then configure curl to use those.
Let me start by building the dependencies from source.
compile-bench> wget https://www.openssl.org/source/openssl-3.0.2.tar.gz --2025-09-16 22:01:52-- https://www.openssl.org/source/openssl-3.0.2.tar.gz
Resolving www.openssl.org (www.openssl.org)... 34.49.79.89, 2600:1901:0:d50b::
Connecting to www.openssl.org (www.openssl.org)|34.49.79.89|:443... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: https://github.com/openssl/openssl/releases/download/openssl-3.0.2/openssl-3.0.2.tar.gz [following]
--2025-09-16 22:01:53-- https://github.com/openssl/openssl/releases/download/openssl-3.0.2/openssl-3.0.2.tar.gz
Resolving github.com (github.com)... 140.82.112.4
Connecting to github.com (github.com)|140.82.112.4|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://release-assets.githubusercontent.com/github-production-release-asset/7634677/3d4f77fc-450f-44e3-9ebe-5ee06e885eff?sp=r&sv=2018-11-09&sr=b&spr=https&se=2025-09-16T23%3A02%3A07Z&rscd=attachment%3B+filename%3Dopenssl-3.0.2.tar.gz&rsct=application%2Foctet-stream&skoid=96c2d410-5711-43a1-aedd-ab1947aa7ab0&sktid=398a6654-997b-47e9-b12b-9515b896b4de&skt=2025-09-16T22%3A01%3A37Z&ske=2025-09-16T23%3A02%3A07Z&sks=b&skv=2018-11-09&sig=RxNuh4xuTeQOvQTBR5TIpEWa5duQMUL6L8tPsiH8vv0%3D&jwt=eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJpc3MiOiJnaXRodWIuY29tIiwiYXVkIjoicmVsZWFzZS1hc3NldHMuZ2l0aHVidXNlcmNvbnRlbnQuY29tIiwia2V5Ijoia2V5MSIsImV4cCI6MTc1ODA2MDQxMywibmJmIjoxNzU4MDYwMTEzLCJwYXRoIjoicmVsZWFzZWFzc2V0cHJvZHVjdGlvbi5ibG9iLmNvcmUud2luZG93cy5uZXQifQ.hpVmBCSZyHAsEKeiklhWz_-GLjGEGyZS6n95hIqWAko&response-content-disposition=attachment%3B%20filename%3Dopenssl-3.0.2.tar.gz&response-content-type=application%2Foctet-stream [following]
--2025-09-16 22:01:53-- https://release-assets.githubusercontent.com/github-production-release-asset/7634677/3d4f77fc-450f-44e3-9ebe-5ee06e885eff?sp=r&sv=2018-11-09&sr=b&spr=https&se=2025-09-16T23%3A02%3A07Z&rscd=attachment%3B+filename%3Dopenssl-3.0.2.tar.gz&rsct=application%2Foctet-stream&skoid=96c2d410-5711-43a1-aedd-ab1947aa7ab0&sktid=398a6654-997b-47e9-b12b-9515b896b4de&skt=2025-09-16T22%3A01%3A37Z&ske=2025-09-16T23%3A02%3A07Z&sks=b&skv=2018-11-09&sig=RxNuh4xuTeQOvQTBR5TIpEWa5duQMUL6L8tPsiH8vv0%3D&jwt=eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJpc3MiOiJnaXRodWIuY29tIiwiYXVkIjoicmVsZWFzZS1hc3NldHMuZ2l0aHVidXNlcmNvbnRlbnQuY29tIiwia2V5Ijoia2V5MSIsImV4cCI6MTc1ODA2MDQxMywibmJmIjoxNzU4MDYwMTEzLCJwYXRoIjoicmVsZWFzZWFzc2V0cHJvZHVjdGlvbi5ibG9iLmNvcmUud2luZG93cy5uZXQifQ.hpVmBCSZyHAsEKeiklhWz_-GLjGEGyZS6n95hIqWAko&response-content-disposition=attachment%3B%20filename%3Dopenssl-3.0.2.tar.gz&response-content-type=application%2Foctet-stream
Resolving release-assets.githubusercontent.com (release-assets.githubusercontent.com)... 185.199.108.133, 185.199.109.133, 185.199.110.133, ...
Connecting to release-assets.githubusercontent.com (release-assets.githubusercontent.com)|185.199.108.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 15038141 (14M) [application/octet-stream]
Saving to: 'openssl-3.0.2.tar.gz'
openssl-3.0.2.tar.g 0%[ ] 0 --.-KB/s
openssl-3.0.2.tar.g 100%[===================>] 14.34M 71.9MB/s in 0.2s
2025-09-16 22:01:53 (71.9 MB/s) - 'openssl-3.0.2.tar.gz' saved [15038141/15038141]
↓ 21 lines
compile-bench> wget https://www.openssl.org/source/openssl-3.0.2.tar.gz
--2025-09-16 22:01:52-- https://www.openssl.org/source/openssl-3.0.2.tar.gz Resolving www.openssl.org (www.openssl.org)... 34.49.79.89, 2600:1901:0:d50b:: Connecting to www.openssl.org (www.openssl.org)|34.49.79.89|:443... connected. HTTP request sent, awaiting response... 301 Moved Permanently Location: https://github.com/openssl/openssl/releases/download/openssl-3.0.2/openssl-3.0.2.tar.gz [following] --2025-09-16 22:01:53-- https://github.com/openssl/openssl/releases/download/openssl-3.0.2/openssl-3.0.2.tar.gz Resolving github.com (github.com)... 140.82.112.4 Connecting to github.com (github.com)|140.82.112.4|:443... connected. HTTP request sent, awaiting response... 302 Found Location: https://release-assets.githubusercontent.com/github-production-release-asset/7634677/3d4f77fc-450f-44e3-9ebe-5ee06e885eff?sp=r&sv=2018-11-09&sr=b&spr=https&se=2025-09-16T23%3A02%3A07Z&rscd=attachment%3B+filename%3Dopenssl-3.0.2.tar.gz&rsct=application%2Foctet-stream&skoid=96c2d410-5711-43a1-aedd-ab1947aa7ab0&sktid=398a6654-997b-47e9-b12b-9515b896b4de&skt=2025-09-16T22%3A01%3A37Z&ske=2025-09-16T23%3A02%3A07Z&sks=b&skv=2018-11-09&sig=RxNuh4xuTeQOvQTBR5TIpEWa5duQMUL6L8tPsiH8vv0%3D&jwt=eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJpc3MiOiJnaXRodWIuY29tIiwiYXVkIjoicmVsZWFzZS1hc3NldHMuZ2l0aHVidXNlcmNvbnRlbnQuY29tIiwia2V5Ijoia2V5MSIsImV4cCI6MTc1ODA2MDQxMywibmJmIjoxNzU4MDYwMTEzLCJwYXRoIjoicmVsZWFzZWFzc2V0cHJvZHVjdGlvbi5ibG9iLmNvcmUud2luZG93cy5uZXQifQ.hpVmBCSZyHAsEKeiklhWz_-GLjGEGyZS6n95hIqWAko&response-content-disposition=attachment%3B%20filename%3Dopenssl-3.0.2.tar.gz&response-content-type=application%2Foctet-stream [following] --2025-09-16 22:01:53-- https://release-assets.githubusercontent.com/github-production-release-asset/7634677/3d4f77fc-450f-44e3-9ebe-5ee06e885eff?sp=r&sv=2018-11-09&sr=b&spr=https&se=2025-09-16T23%3A02%3A07Z&rscd=attachment%3B+filename%3Dopenssl-3.0.2.tar.gz&rsct=application%2Foctet-stream&skoid=96c2d410-5711-43a1-aedd-ab1947aa7ab0&sktid=398a6654-997b-47e9-b12b-9515b896b4de&skt=2025-09-16T22%3A01%3A37Z&ske=2025-09-16T23%3A02%3A07Z&sks=b&skv=2018-11-09&sig=RxNuh4xuTeQOvQTBR5TIpEWa5duQMUL6L8tPsiH8vv0%3D&jwt=eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJpc3MiOiJnaXRodWIuY29tIiwiYXVkIjoicmVsZWFzZS1hc3NldHMuZ2l0aHVidXNlcmNvbnRlbnQuY29tIiwia2V5Ijoia2V5MSIsImV4cCI6MTc1ODA2MDQxMywibmJmIjoxNzU4MDYwMTEzLCJwYXRoIjoicmVsZWFzZWFzc2V0cHJvZHVjdGlvbi5ibG9iLmNvcmUud2luZG93cy5uZXQifQ.hpVmBCSZyHAsEKeiklhWz_-GLjGEGyZS6n95hIqWAko&response-content-disposition=attachment%3B%20filename%3Dopenssl-3.0.2.tar.gz&response-content-type=application%2Foctet-stream Resolving release-assets.githubusercontent.com (release-assets.githubusercontent.com)... 185.199.108.133, 185.199.109.133, 185.199.110.133, ... Connecting to release-assets.githubusercontent.com (release-assets.githubusercontent.com)|185.199.108.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 15038141 (14M) [application/octet-stream] Saving to: 'openssl-3.0.2.tar.gz' openssl-3.0.2.tar.g 0%[ ] 0 --.-KB/s openssl-3.0.2.tar.g 100%[===================>] 14.34M 71.9MB/s in 0.2s 2025-09-16 22:01:53 (71.9 MB/s) - 'openssl-3.0.2.tar.gz' saved [15038141/15038141]
ASSISTANT
compile-bench> tar -xzf openssl-3.0.2.tar.gz
[empty output]
ASSISTANT
compile-bench> wget https://github.com/google/brotli/archive/refs/tags/v1.0.9.tar.gz --2025-09-16 22:01:58-- https://github.com/google/brotli/archive/refs/tags/v1.0.9.tar.gz
Resolving github.com (github.com)... 140.82.112.4
Connecting to github.com (github.com)|140.82.112.4|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://codeload.github.com/google/brotli/tar.gz/refs/tags/v1.0.9 [following]
--2025-09-16 22:01:58-- https://codeload.github.com/google/brotli/tar.gz/refs/tags/v1.0.9
Resolving codeload.github.com (codeload.github.com)... 140.82.112.9
Connecting to codeload.github.com (codeload.github.com)|140.82.112.9|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 486984 (476K) [application/x-gzip]
Saving to: 'v1.0.9.tar.gz'
v1.0.9.tar.gz 0%[ ] 0 --.-KB/s
v1.0.9.tar.gz 100%[===================>] 475.57K --.-KB/s in 0.05s
2025-09-16 22:01:58 (9.02 MB/s) - 'v1.0.9.tar.gz' saved [486984/486984]
↓ 16 lines
compile-bench> wget https://github.com/google/brotli/archive/refs/tags/v1.0.9.tar.gz
--2025-09-16 22:01:58-- https://github.com/google/brotli/archive/refs/tags/v1.0.9.tar.gz Resolving github.com (github.com)... 140.82.112.4 Connecting to github.com (github.com)|140.82.112.4|:443... connected. HTTP request sent, awaiting response... 302 Found Location: https://codeload.github.com/google/brotli/tar.gz/refs/tags/v1.0.9 [following] --2025-09-16 22:01:58-- https://codeload.github.com/google/brotli/tar.gz/refs/tags/v1.0.9 Resolving codeload.github.com (codeload.github.com)... 140.82.112.9 Connecting to codeload.github.com (codeload.github.com)|140.82.112.9|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 486984 (476K) [application/x-gzip] Saving to: 'v1.0.9.tar.gz' v1.0.9.tar.gz 0%[ ] 0 --.-KB/s v1.0.9.tar.gz 100%[===================>] 475.57K --.-KB/s in 0.05s 2025-09-16 22:01:58 (9.02 MB/s) - 'v1.0.9.tar.gz' saved [486984/486984]
ASSISTANT
compile-bench> wget https://github.com/facebook/zstd/archive/refs/tags/v1.5.2.tar.gz --2025-09-16 22:02:00-- https://github.com/facebook/zstd/archive/refs/tags/v1.5.2.tar.gz
Resolving github.com (github.com)... 140.82.114.4
Connecting to github.com (github.com)|140.82.114.4|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://codeload.github.com/facebook/zstd/tar.gz/refs/tags/v1.5.2 [following]
--2025-09-16 22:02:01-- https://codeload.github.com/facebook/zstd/tar.gz/refs/tags/v1.5.2
Resolving codeload.github.com (codeload.github.com)... 140.82.114.10
Connecting to codeload.github.com (codeload.github.com)|140.82.114.10|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1950967 (1.9M) [application/x-gzip]
Saving to: 'v1.5.2.tar.gz'
v1.5.2.tar.gz 0%[ ] 0 --.-KB/s
v1.5.2.tar.gz 100%[===================>] 1.86M --.-KB/s in 0.07s
2025-09-16 22:02:01 (25.7 MB/s) - 'v1.5.2.tar.gz' saved [1950967/1950967]
↓ 16 lines
compile-bench> wget https://github.com/facebook/zstd/archive/refs/tags/v1.5.2.tar.gz
--2025-09-16 22:02:00-- https://github.com/facebook/zstd/archive/refs/tags/v1.5.2.tar.gz Resolving github.com (github.com)... 140.82.114.4 Connecting to github.com (github.com)|140.82.114.4|:443... connected. HTTP request sent, awaiting response... 302 Found Location: https://codeload.github.com/facebook/zstd/tar.gz/refs/tags/v1.5.2 [following] --2025-09-16 22:02:01-- https://codeload.github.com/facebook/zstd/tar.gz/refs/tags/v1.5.2 Resolving codeload.github.com (codeload.github.com)... 140.82.114.10 Connecting to codeload.github.com (codeload.github.com)|140.82.114.10|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 1950967 (1.9M) [application/x-gzip] Saving to: 'v1.5.2.tar.gz' v1.5.2.tar.gz 0%[ ] 0 --.-KB/s v1.5.2.tar.gz 100%[===================>] 1.86M --.-KB/s in 0.07s 2025-09-16 22:02:01 (25.7 MB/s) - 'v1.5.2.tar.gz' saved [1950967/1950967]
ASSISTANT
compile-bench> wget https://zlib.net/zlib-1.2.11.tar.gz --2025-09-16 22:02:03-- https://zlib.net/zlib-1.2.11.tar.gz
Resolving zlib.net (zlib.net)... 85.187.148.2
Connecting to zlib.net (zlib.net)|85.187.148.2|:443... connected.
HTTP request sent, awaiting response... 404 Not Found
2025-09-16 22:02:03 ERROR 404: Not Found.
↓ 6 lines
compile-bench> wget https://zlib.net/zlib-1.2.11.tar.gz
--2025-09-16 22:02:03-- https://zlib.net/zlib-1.2.11.tar.gz Resolving zlib.net (zlib.net)... 85.187.148.2 Connecting to zlib.net (zlib.net)|85.187.148.2|:443... connected. HTTP request sent, awaiting response... 404 Not Found 2025-09-16 22:02:03 ERROR 404: Not Found.
ASSISTANT
compile-bench> wget https://zlib.net/fossils/zlib-1.2.11.tar.gz --2025-09-16 22:02:05-- https://zlib.net/fossils/zlib-1.2.11.tar.gz
Resolving zlib.net (zlib.net)... 85.187.148.2
Connecting to zlib.net (zlib.net)|85.187.148.2|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 607698 (593K) [application/x-gzip]
Saving to: 'zlib-1.2.11.tar.gz'
zlib-1.2.11.tar.gz 0%[ ] 0 --.-KB/s
zlib-1.2.11.tar.gz 72%[=============> ] 429.47K 1.81MB/s
zlib-1.2.11.tar.gz 100%[===================>] 593.46K 2.35MB/s in 0.2s
2025-09-16 22:02:06 (2.35 MB/s) - 'zlib-1.2.11.tar.gz' saved [607698/607698]
↓ 11 lines
compile-bench> wget https://zlib.net/fossils/zlib-1.2.11.tar.gz
--2025-09-16 22:02:05-- https://zlib.net/fossils/zlib-1.2.11.tar.gz Resolving zlib.net (zlib.net)... 85.187.148.2 Connecting to zlib.net (zlib.net)|85.187.148.2|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 607698 (593K) [application/x-gzip] Saving to: 'zlib-1.2.11.tar.gz' zlib-1.2.11.tar.gz 0%[ ] 0 --.-KB/s zlib-1.2.11.tar.gz 72%[=============> ] 429.47K 1.81MB/s zlib-1.2.11.tar.gz 100%[===================>] 593.46K 2.35MB/s in 0.2s 2025-09-16 22:02:06 (2.35 MB/s) - 'zlib-1.2.11.tar.gz' saved [607698/607698]
ASSISTANT
compile-bench> tar -xzf v1.0.9.tar.gz && tar -xzf v1.5.2.tar.gz && tar -xzf zlib-1.2.11.tar.gz
[empty output]
ASSISTANT
compile-bench> mkdir -p deps-build && cd deps-build && mkdir zlib brotli zstd openssl
[empty output]
ASSISTANT
compile-bench> export INSTALL_DIR=/home/peter/deps-install && mkdir -p $INSTALL_DIR
[empty output]
ASSISTANT
compile-bench> cd deps-build/zlib && ../../zlib-1.2.11/configure --prefix=$INSTALL_DIR --static Checking for gcc...
Building static library libz.a version 1.2.11 with gcc.
Checking for size_t... Yes.
Checking for off64_t... Yes.
Checking for fseeko... Yes.
Checking for strerror... Yes.
Checking for unistd.h... Yes.
Checking for stdarg.h... Yes.
Checking whether to use vs[n]printf() or s[n]printf()... using vs[n]printf().
Checking for vsnprintf() in stdio.h... Yes.
Checking for return value of vsnprintf()... Yes.
Checking for attribute(visibility) support... Yes.
↓ 13 lines
compile-bench> cd deps-build/zlib && ../../zlib-1.2.11/configure --prefix=$INSTALL_DIR --static
Checking for gcc... Building static library libz.a version 1.2.11 with gcc. Checking for size_t... Yes. Checking for off64_t... Yes. Checking for fseeko... Yes. Checking for strerror... Yes. Checking for unistd.h... Yes. Checking for stdarg.h... Yes. Checking whether to use vs[n]printf() or s[n]printf()... using vs[n]printf(). Checking for vsnprintf() in stdio.h... Yes. Checking for return value of vsnprintf()... Yes. Checking for attribute(visibility) support... Yes.
ASSISTANT
compile-bench> cd deps-build/zlib && make -j4 gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -I. -I../../zlib-1.2.11/ -c -o example.o ../../zlib-1.2.11/test/example.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -include zconf.h -c -o adler32.o ../../zlib-1.2.11/adler32.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -include zconf.h -c -o crc32.o ../../zlib-1.2.11/crc32.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -include zconf.h -c -o deflate.o ../../zlib-1.2.11/deflate.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -include zconf.h -c -o infback.o ../../zlib-1.2.11/infback.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -include zconf.h -c -o inffast.o ../../zlib-1.2.11/inffast.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -include zconf.h -c -o inflate.o ../../zlib-1.2.11/inflate.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -include zconf.h -c -o inftrees.o ../../zlib-1.2.11/inftrees.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -include zconf.h -c -o trees.o ../../zlib-1.2.11/trees.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -include zconf.h -c -o zutil.o ../../zlib-1.2.11/zutil.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -include zconf.h -c -o compress.o ../../zlib-1.2.11/compress.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -include zconf.h -c -o uncompr.o ../../zlib-1.2.11/uncompr.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -include zconf.h -c -o gzclose.o ../../zlib-1.2.11/gzclose.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -include zconf.h -c -o gzlib.o ../../zlib-1.2.11/gzlib.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -include zconf.h -c -o gzread.o ../../zlib-1.2.11/gzread.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -include zconf.h -c -o gzwrite.o ../../zlib-1.2.11/gzwrite.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -I. -I../../zlib-1.2.11/ -c -o minigzip.o ../../zlib-1.2.11/test/minigzip.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -I. -I../../zlib-1.2.11/ -D_FILE_OFFSET_BITS=64 -c -o example64.o ../../zlib-1.2.11/test/example.c
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -I. -I../../zlib-1.2.11/ -D_FILE_OFFSET_BITS=64 -c -o minigzip64.o ../../zlib-1.2.11/test/minigzip.c
ar rc libz.a adler32.o crc32.o deflate.o infback.o inffast.o inflate.o inftrees.o trees.o zutil.o compress.o uncompr.o gzclose.o gzlib.o gzread.o gzwrite.o
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -o example example.o -L. libz.a
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -o minigzip minigzip.o -L. libz.a
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -o example64 example64.o -L. libz.a
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -o minigzip64 minigzip64.o -L. libz.a
↓ 25 lines
compile-bench> cd deps-build/zlib && make -j4
gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -I. -I../../zlib-1.2.11/ -c -o example.o ../../zlib-1.2.11/test/example.c gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -include zconf.h -c -o adler32.o ../../zlib-1.2.11/adler32.c gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -include zconf.h -c -o crc32.o ../../zlib-1.2.11/crc32.c gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -include zconf.h -c -o deflate.o ../../zlib-1.2.11/deflate.c gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -include zconf.h -c -o infback.o ../../zlib-1.2.11/infback.c gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -include zconf.h -c -o inffast.o ../../zlib-1.2.11/inffast.c gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -include zconf.h -c -o inflate.o ../../zlib-1.2.11/inflate.c gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -include zconf.h -c -o inftrees.o ../../zlib-1.2.11/inftrees.c gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -include zconf.h -c -o trees.o ../../zlib-1.2.11/trees.c gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -include zconf.h -c -o zutil.o ../../zlib-1.2.11/zutil.c gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -include zconf.h -c -o compress.o ../../zlib-1.2.11/compress.c gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -include zconf.h -c -o uncompr.o ../../zlib-1.2.11/uncompr.c gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -include zconf.h -c -o gzclose.o ../../zlib-1.2.11/gzclose.c gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -include zconf.h -c -o gzlib.o ../../zlib-1.2.11/gzlib.c gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -include zconf.h -c -o gzread.o ../../zlib-1.2.11/gzread.c gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -include zconf.h -c -o gzwrite.o ../../zlib-1.2.11/gzwrite.c gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -I. -I../../zlib-1.2.11/ -c -o minigzip.o ../../zlib-1.2.11/test/minigzip.c gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -I. -I../../zlib-1.2.11/ -D_FILE_OFFSET_BITS=64 -c -o example64.o ../../zlib-1.2.11/test/example.c gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -I. -I../../zlib-1.2.11/ -D_FILE_OFFSET_BITS=64 -c -o minigzip64.o ../../zlib-1.2.11/test/minigzip.c ar rc libz.a adler32.o crc32.o deflate.o infback.o inffast.o inflate.o inftrees.o trees.o zutil.o compress.o uncompr.o gzclose.o gzlib.o gzread.o gzwrite.o gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -o example example.o -L. libz.a gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -o minigzip minigzip.o -L. libz.a gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -o example64 example64.o -L. libz.a gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -o minigzip64 minigzip64.o -L. libz.a
ASSISTANT
Show reasoning
Task failed!
Error
task failed: curl binary does not exist
Checks failed:
curl binary does not exist
curl-arm64 binary does not exist
curl version mismatch: expected 8.16.0 got
curl did not download the expected local file content, but instead:
curl HTTPS request to google.com did not return content-type: text/html but instead:
curl brotli compression test failed - content-encoding: br not found