| Cost | $0.246 |
| Total elapsed time | 2m40s |
| LLM inference time | 1m55s |
| Command execution time | 45s |
| Commands executed | 23 |
All details >
| Attempt ID | wn13fmmw4o0jj | Attempt group | run-29-09-25-19-32 |
| Revision | 0cfc533b3f68 | AWS Instance | m8i.2xlarge |
| Start time | 2025-09-29T18:13:48.600Z | End time | 2025-09-29T18:16:30.860Z |
| Task | curl-ssl | Environment | ubuntu-22.04-amd64 |
| Model |  claude-sonnet-4.5-thinking-16k | OpenRouter slug | anthropic/claude-sonnet-4.5 |
| Temperature | 1 | Explicit prompt caching | true |
| User msg after tool call | true | Max tool calls | 70 |
| Total timeout seconds | 900 | Single command timeout | 600 |
| Cost | $0.246 | Duration | 2m40s |
| LLM inference time | 1m55s | Command execution time | 45s |
| Final context tokens | 19,065 | Total output tokens | 5,963 |
| Output reasoning tokens | 2,433 | Messages | 49 |
| Assistant messages | 24 | User messages | 1 |
| System messages | 1 | Commands executed | 23 |
curl 8.16.0 is a command-line HTTP client.
Project link: curl.se
Task:
Compile and install curl to a specific location. Build with SSL support (TLS v1.3), brotli, zlib and zstd.
Difficulties:
Installing dependencies can be tricky.
Environment:
Ubuntu 22.04 on amd64, with internet access.
You are a package-building specialist operating a Ubuntu 22.04 bash shell via one tool: run_terminal_cmd.
The current working directory of every run_terminal_cmd is /home/peter.
Execution rules:
- Always pass non-interactive flags for any command that could prompt (e.g., -y, --yes, DEBIAN_FRONTEND=noninteractive).
- Don't include any newlines in the command.
- You can use sudo.
If you encounter any errors or issues while doing the user's request, you must fix them and continue the task.
At the end verify you did the user request correctly.
You are given a curl v8.16.0 source code at /home/peter/curl.tar.gz. Please compile curl and install it to /home/peter/result. Create a symlink from /home/peter/result/curl to the actual binary. Make sure it builds with SSL support (TLS v1.3), brotli, zlib and zstd.
Show reasoning
The user wants me to:
1. Extract curl v8.16.0 source code from /home/peter/curl.tar.gz
2. Compile curl with specific features:
- SSL support (TLS v1.3)
- brotli
- zlib
- zstd
3. Install it to /home/peter/result
4. Create a symlink from /home/peter/result/curl to the actual binary
Let me break this down:
1. First, I need to extract the tarball
2. Install necessary build dependencies (build tools, SSL libraries, brotli, zlib, zstd)
3. Configure curl with the appropriate flags
4. Build and install
5. Create the symlink
6. Verify the installation has the required features
Let me start:
I'll help you compile curl with the specified features. Let me break this down into steps:
1. First, let me extract the tarball and install necessary dependencies
2. Configure curl with SSL, brotli, zlib, and zstd support
3. Compile and install to /home/peter/result
4. Create the symlink
5. Verify the build
Let's start:
compile-bench> cd /home/peter && tar -tzf curl.tar.gz | head -5 curl-8.16.0/
curl-8.16.0/.editorconfig
curl-8.16.0/CHANGES.md
curl-8.16.0/CMake/
curl-8.16.0/CMake/CMakeConfigurableFile.in
↓ 6 lines
curl-8.16.0/ curl-8.16.0/.editorconfig curl-8.16.0/CHANGES.md curl-8.16.0/CMake/ curl-8.16.0/CMake/CMakeConfigurableFile.in
Show reasoning
The user wants me to compile curl v8.16.0 with specific features. Let me continue with the process:
1. Extract the tarball
2. Install dependencies for SSL (OpenSSL), brotli, zlib, and zstd
3. Configure, compile, and install curl
4. Create the symlink
5. Verify the build
Let me proceed step by step.
[empty output]
Show reasoning
The user wants me to continue. Let me install the dependencies needed for building curl with SSL (TLS v1.3), brotli, zlib, and zstd support.
compile-bench> sudo DEBIAN_FRONTEND=noninteractive apt-get update -y
0% [Working]
Get:1 http://security.ubuntu.com/ubuntu jammy-security InRelease [129 kB]
0% [Connecting to archive.ubuntu.com (185.125.190.82)] [1 InRelease 14.2 kB/129
0% [Waiting for headers]
0% [Waiting for headers]
Hit:2 http://archive.ubuntu.com/ubuntu jammy InRelease
0% [Waiting for headers]
Get:3 http://security.ubuntu.com/ubuntu jammy-security/restricted amd64 Packages [5609 kB]
0% [Waiting for headers] [3 Packages 6999 B/5609 kB 0%]
0% [Waiting for headers] [3 Packages 352 kB/5609 kB 6%]
Get:4 http://archive.ubuntu.com/ubuntu jammy-updates InRelease [128 kB]
0% [4 InRelease 12.7 kB/128 kB 10%] [3 Packages 1459 kB/5609 kB 26%]
0% [4 InRelease 15.6 kB/128 kB 12%]
0% [3 Packages store 0 B] [4 InRelease 15.6 kB/128 kB 12%] [Waiting for headers
Get:5 http://security.ubuntu.com/ubuntu jammy-security/universe amd64 Packages [1274 kB]
0% [3 Packages store 0 B] [4 InRelease 15.6 kB/128 kB 12%] [5 Packages 94.3 kB/
0% [3 Packages store 0 B] [4 InRelease 15.6 kB/128 kB 12%] [Waiting for headers
Get:6 http://security.ubuntu.com/ubuntu jammy-security/multiverse amd64 Packages [71.0 kB]
0% [3 Packages store 0 B] [4 InRelease 15.6 kB/128 kB 12%] [6 Packages 41.7 kB/
0% [3 Packages store 0 B] [4 InRelease 15.6 kB/128 kB 12%] [Waiting for headers
Get:7 http://security.ubuntu.com/ubuntu jammy-security/main amd64 Packages [3371 kB]
0% [3 Packages store 0 B] [4 InRelease 15.6 kB/128 kB 12%] [7 Packages 36.0 kB/
0% [3 Packages store 0 B] [4 InRelease 21.4 kB/128 kB 17%]
0% [4 InRelease 67.7 kB/128 kB 53%]
0% [5 Packages store 0 B] [4 InRelease 67.7 kB/128 kB 53%]
0% [4 InRelease 90.9 kB/128 kB 71%]
0% [6 Packages store 0 B] [4 InRelease 90.9 kB/128 kB 71%]
0% [4 InRelease 90.9 kB/128 kB 71%]
0% [7 Packages store 0 B] [4 InRelease 90.9 kB/128 kB 71%]
0% [7 Packages store 0 B] [Waiting for headers]
0% [7 Packages store 0 B] [Waiting for headers]
0% [Waiting for headers]
Get:8 http://archive.ubuntu.com/ubuntu jammy-backports InRelease [127 kB]
0% [8 InRelease 2588 B/127 kB 2%]
0% [Working]
56% [Waiting for headers]
Get:9 http://archive.ubuntu.com/ubuntu jammy-updates/multiverse amd64 Packages [69.1 kB]
56% [9 Packages 2658 B/69.1 kB 4%]
57% [Waiting for headers]
Get:10 http://archive.ubuntu.com/ubuntu jammy-updates/restricted amd64 Packages [5804 kB]
57% [10 Packages 1342 B/5804 kB 0%]
57% [9 Packages store 0 B] [10 Packages 1342 B/5804 kB 0%]
57% [10 Packages 4238 B/5804 kB 0%]
78% [Waiting for headers]
Get:11 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 Packages [3690 kB]
79% [11 Packages 30.6 kB/3690 kB 1%]
79% [10 Packages store 0 B] [11 Packages 71.8 kB/3690 kB 2%]
Get:12 http://archive.ubuntu.com/ubuntu jammy-updates/universe amd64 Packages [1577 kB]
92% [10 Packages store 0 B] [12 Packages 45.1 kB/1577 kB 3%]
Get:13 http://archive.ubuntu.com/ubuntu jammy-backports/universe amd64 Packages [35.2 kB]
98% [10 Packages store 0 B] [13 Packages 24.6 kB/35.2 kB 70%]
98% [10 Packages store 0 B]
98% [Working]
98% [11 Packages store 0 B]
99% [Working]
99% [12 Packages store 0 B]
99% [Working]
99% [13 Packages store 0 B]
100% [Working]
Fetched 21.9 MB in 2s (13.0 MB/s)
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 3%
Reading package lists... 3%
Reading package lists... 4%
Reading package lists... 4%
Reading package lists... 41%
Reading package lists... 41%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 51%
Reading package lists... 51%
Reading package lists... 67%
Reading package lists... 67%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 80%
Reading package lists... 80%
Reading package lists... 96%
Reading package lists... 96%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... Done
↓ 16 lines
0% [Working]
Get:1 http://security.ubuntu.com/ubuntu jammy-security InRelease [129 kB]
0% [Connecting to archive.ubuntu.com (185.125.190.82)] [1 InRelease 14.2 kB/129
0% [Waiting for headers]
0% [Waiting for headers]
Hit:2 http://archive.ubuntu.com/ubuntu jammy InRelease
0% [Waiting for headers]
Get:3 http://security.ubuntu.com/ubuntu jammy-security/restricted amd64 Packages [5609 kB]
0% [Waiting for headers] [3 Packages 6999 B/5609 kB 0%]
0% [Waiting for headers] [3 Packages 352 kB/5609 kB 6%]
Get:4 http://archive.ubuntu.com/ubuntu jammy-updates InRelease [128 kB]
0% [4 InRelease 12.7 kB/128 kB 10%] [3 Packages 1459 kB/5609 kB 26%]
0% [4 InRelease 15.6 kB/128 kB 12%]
0% [3 Packages store 0 B] [4 InRelease 15.6 kB/128 kB 12%] [Waiting for headers
Get:5 http://security.ubuntu.com/ubuntu jammy-security/universe amd64 Packages [1274 kB]
0% [3 Packages store 0 B] [4 InRelease 15.6 kB/128 kB 12%] [5 Packages 94.3 kB/
0% [3 Packages store 0 B] [4 InRelease 15.6 kB/128 kB 12%] [Waiting for headers
Get:6 http://security.ubuntu.com/ubuntu jammy-security/multiverse amd64 Packages [71.0 kB]
0% [3 Packages store 0 B] [4 InRelease 15.6 kB/128 kB 12%] [6 Packages 41.7 kB/
0% [3 Packages store 0 B] [4 InRelease 15.6 kB/128 kB 12%] [Waiting for headers
Get:7 http://security.ubuntu.com/ubuntu jammy-security/main amd64 Packages [3371 kB]
0% [3 Packages store 0 B] [4 InRelease 15.6 kB/128 kB 12%] [7 Packages 36.0 kB/
0% [3 Packages store 0 B] [4 InRelease 21.4 kB/128 kB 17%]
0% [4 InRelease 67.7 kB/128 kB 53%]
0% [5 Packages store 0 B] [4 InRelease 67.7 kB/128 kB 53%]
0% [4 InRelease 90.9 kB/128 kB 71%]
0% [6 Packages store 0 B] [4 InRelease 90.9 kB/128 kB 71%]
0% [4 InRelease 90.9 kB/128 kB 71%]
0% [7 Packages store 0 B] [4 InRelease 90.9 kB/128 kB 71%]
0% [7 Packages store 0 B] [Waiting for headers]
0% [7 Packages store 0 B] [Waiting for headers]
0% [Waiting for headers]
Get:8 http://archive.ubuntu.com/ubuntu jammy-backports InRelease [127 kB]
0% [8 InRelease 2588 B/127 kB 2%]
0% [Working]
56% [Waiting for headers]
Get:9 http://archive.ubuntu.com/ubuntu jammy-updates/multiverse amd64 Packages [69.1 kB]
56% [9 Packages 2658 B/69.1 kB 4%]
57% [Waiting for headers]
Get:10 http://archive.ubuntu.com/ubuntu jammy-updates/restricted amd64 Packages [5804 kB]
57% [10 Packages 1342 B/5804 kB 0%]
57% [9 Packages store 0 B] [10 Packages 1342 B/5804 kB 0%]
57% [10 Packages 4238 B/5804 kB 0%]
78% [Waiting for headers]
Get:11 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 Packages [3690 kB]
79% [11 Packages 30.6 kB/3690 kB 1%]
79% [10 Packages store 0 B] [11 Packages 71.8 kB/3690 kB 2%]
Get:12 http://archive.ubuntu.com/ubuntu jammy-updates/universe amd64 Packages [1577 kB]
92% [10 Packages store 0 B] [12 Packages 45.1 kB/1577 kB 3%]
Get:13 http://archive.ubuntu.com/ubuntu jammy-backports/universe amd64 Packages [35.2 kB]
98% [10 Packages store 0 B] [13 Packages 24.6 kB/35.2 kB 70%]
98% [10 Packages store 0 B]
98% [Working]
98% [11 Packages store 0 B]
99% [Working]
99% [12 Packages store 0 B]
99% [Working]
99% [13 Packages store 0 B]
100% [Working]
Fetched 21.9 MB in 2s (13.0 MB/s)
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 3%
Reading package lists... 3%
Reading package lists... 4%
Reading package lists... 4%
Reading package lists... 41%
Reading package lists... 41%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 51%
Reading package lists... 51%
Reading package lists... 67%
Reading package lists... 67%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 80%
Reading package lists... 80%
Reading package lists... 96%
Reading package lists... 96%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... Done
Show reasoning
Good, the apt update finished. Now I need to install the dependencies for building curl with SSL (TLS v1.3), brotli, zlib, and zstd support. Let me install the necessary development packages:
- build-essential (for gcc, make, etc.)
- libssl-dev (for SSL/TLS support)
- libbrotli-dev (for brotli support)
- zlib1g-dev (for zlib support)
- libzstd-dev (for zstd support)
- autoconf, automake, libtool (for building from source)
- pkg-config (for finding libraries)
Let me install all these dependencies.
compile-bench> sudo DEBIAN_FRONTEND=noninteractive apt-get install -y build-essential libssl-dev libbrotli-dev zlib1g-dev libzstd-dev autoconf automake libtool pkg-config
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 3%
Reading package lists... 3%
Reading package lists... 4%
Reading package lists... 4%
Reading package lists... 41%
Reading package lists... 41%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 51%
Reading package lists... 51%
Reading package lists... 67%
Reading package lists... 67%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 80%
Reading package lists... 80%
Reading package lists... 96%
Reading package lists... 96%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... Done
Building dependency tree... 0%
Building dependency tree... 0%
Building dependency tree... 50%
Building dependency tree... 50%
Building dependency tree... Done
Reading state information... 0%
Reading state information... 1%
Reading state information... Done
build-essential is already the newest version (12.9ubuntu3).
The following additional packages will be installed:
autotools-dev libglib2.0-0 libglib2.0-data libicu70 libltdl-dev libltdl7
libsigsegv2 libxml2 m4 shared-mime-info xdg-user-dirs
Suggested packages:
autoconf-archive gnu-standards autoconf-doc gettext libtool-doc libssl-doc
gfortran | fortran95-compiler gcj-jdk m4-doc
The following NEW packages will be installed:
autoconf automake autotools-dev libbrotli-dev libglib2.0-0 libglib2.0-data
libicu70 libltdl-dev libltdl7 libsigsegv2 libssl-dev libtool libxml2
libzstd-dev m4 pkg-config shared-mime-info xdg-user-dirs zlib1g-dev
0 upgraded, 19 newly installed, 0 to remove and 10 not upgraded.
Need to get 18.2 MB of archives.
After this operation, 67.4 MB of additional disk space will be used.
0% [Working]
Get:1 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libglib2.0-0 amd64 2.72.4-0ubuntu2.6 [1467 kB]
0% [1 libglib2.0-0 14.2 kB/1467 kB 1%]
8% [Working]
Get:2 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libglib2.0-data all 2.72.4-0ubuntu2.6 [4698 B]
9% [Waiting for headers]
Get:3 http://archive.ubuntu.com/ubuntu jammy/main amd64 libicu70 amd64 70.1-2 [10.6 MB]
9% [3 libicu70 31.6 kB/10.6 MB 0%]
56% [Waiting for headers]
Get:4 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libxml2 amd64 2.9.13+dfsg-1ubuntu0.9 [764 kB]
56% [4 libxml2 53.2 kB/764 kB 7%]
61% [Waiting for headers]
Get:5 http://archive.ubuntu.com/ubuntu jammy/main amd64 shared-mime-info amd64 2.1-2 [454
[command output truncated]
age automake.
Preparing to unpack .../10-automake_1%3a1.16.5-1.3_all.deb ...
Unpacking automake (1:1.16.5-1.3) ...
Selecting previously unselected package libbrotli-dev:amd64.
Preparing to unpack .../11-libbrotli-dev_1.0.9-2build6_amd64.deb ...
Unpacking libbrotli-dev:amd64 (1.0.9-2build6) ...
Selecting previously unselected package libltdl7:amd64.
Preparing to unpack .../12-libltdl7_2.4.6-15build2_amd64.deb ...
Unpacking libltdl7:amd64 (2.4.6-15build2) ...
Selecting previously unselected package libltdl-dev:amd64.
Preparing to unpack .../13-libltdl-dev_2.4.6-15build2_amd64.deb ...
Unpacking libltdl-dev:amd64 (2.4.6-15build2) ...
Selecting previously unselected package libssl-dev:amd64.
Preparing to unpack .../14-libssl-dev_3.0.2-0ubuntu1.19_amd64.deb ...
Unpacking libssl-dev:amd64 (3.0.2-0ubuntu1.19) ...
Selecting previously unselected package libtool.
Preparing to unpack .../15-libtool_2.4.6-15build2_all.deb ...
Unpacking libtool (2.4.6-15build2) ...
Selecting previously unselected package libzstd-dev:amd64.
Preparing to unpack .../16-libzstd-dev_1.4.8+dfsg-3build1_amd64.deb ...
Unpacking libzstd-dev:amd64 (1.4.8+dfsg-3build1) ...
Selecting previously unselected package pkg-config.
Preparing to unpack .../17-pkg-config_0.29.2-1ubuntu3_amd64.deb ...
Unpacking pkg-config (0.29.2-1ubuntu3) ...
Selecting previously unselected package zlib1g-dev:amd64.
Preparing to unpack .../18-zlib1g-dev_1%3a1.2.11.dfsg-2ubuntu9.2_amd64.deb ...
Unpacking zlib1g-dev:amd64 (1:1.2.11.dfsg-2ubuntu9.2) ...
Setting up libzstd-dev:amd64 (1.4.8+dfsg-3build1) ...
Setting up xdg-user-dirs (0.17-2ubuntu4) ...
Setting up libglib2.0-0:amd64 (2.72.4-0ubuntu2.6) ...
No schema files found: doing nothing.
Setting up autotools-dev (20220109.1) ...
Setting up libglib2.0-data (2.72.4-0ubuntu2.6) ...
Setting up libsigsegv2:amd64 (2.13-1ubuntu3) ...
Setting up libssl-dev:amd64 (3.0.2-0ubuntu1.19) ...
Setting up pkg-config (0.29.2-1ubuntu3) ...
Setting up libltdl7:amd64 (2.4.6-15build2) ...
Setting up zlib1g-dev:amd64 (1:1.2.11.dfsg-2ubuntu9.2) ...
Setting up libbrotli-dev:amd64 (1.0.9-2build6) ...
Setting up libicu70:amd64 (70.1-2) ...
Setting up libtool (2.4.6-15build2) ...
Setting up m4 (1.4.18-5ubuntu2) ...
Setting up autoconf (2.71-2) ...
Setting up libxml2:amd64 (2.9.13+dfsg-1ubuntu0.9) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/automake.1.gz because associated file /usr/share/man/man1/automake-1.16.1.gz (of link group automake) doesn't exist
update-alternatives: warning: skip creation of /usr/share/man/man1/aclocal.1.gz because associated file /usr/share/man/man1/aclocal-1.16.1.gz (of link group automake) doesn't exist
Setting up libltdl-dev:amd64 (2.4.6-15build2) ...
Setting up shared-mime-info (2.1-2) ...
Processing triggers for libc-bin (2.35-0ubuntu3.10) ...
↓ 75 lines
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 3%
Reading package lists... 3%
Reading package lists... 4%
Reading package lists... 4%
Reading package lists... 41%
Reading package lists... 41%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 51%
Reading package lists... 51%
Reading package lists... 67%
Reading package lists... 67%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 80%
Reading package lists... 80%
Reading package lists... 96%
Reading package lists... 96%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... Done
Building dependency tree... 0%
Building dependency tree... 0%
Building dependency tree... 50%
Building dependency tree... 50%
Building dependency tree... Done
Reading state information... 0%
Reading state information... 1%
Reading state information... Done
build-essential is already the newest version (12.9ubuntu3).
The following additional packages will be installed:
autotools-dev libglib2.0-0 libglib2.0-data libicu70 libltdl-dev libltdl7
libsigsegv2 libxml2 m4 shared-mime-info xdg-user-dirs
Suggested packages:
autoconf-archive gnu-standards autoconf-doc gettext libtool-doc libssl-doc
gfortran | fortran95-compiler gcj-jdk m4-doc
The following NEW packages will be installed:
autoconf automake autotools-dev libbrotli-dev libglib2.0-0 libglib2.0-data
libicu70 libltdl-dev libltdl7 libsigsegv2 libssl-dev libtool libxml2
libzstd-dev m4 pkg-config shared-mime-info xdg-user-dirs zlib1g-dev
0 upgraded, 19 newly installed, 0 to remove and 10 not upgraded.
Need to get 18.2 MB of archives.
After this operation, 67.4 MB of additional disk space will be used.
0% [Working]
Get:1 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libglib2.0-0 amd64 2.72.4-0ubuntu2.6 [1467 kB]
0% [1 libglib2.0-0 14.2 kB/1467 kB 1%]
8% [Working]
Get:2 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libglib2.0-data all 2.72.4-0ubuntu2.6 [4698 B]
9% [Waiting for headers]
Get:3 http://archive.ubuntu.com/ubuntu jammy/main amd64 libicu70 amd64 70.1-2 [10.6 MB]
9% [3 libicu70 31.6 kB/10.6 MB 0%]
56% [Waiting for headers]
Get:4 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libxml2 amd64 2.9.13+dfsg-1ubuntu0.9 [764 kB]
56% [4 libxml2 53.2 kB/764 kB 7%]
61% [Waiting for headers]
Get:5 http://archive.ubuntu.com/ubuntu jammy/main amd64 shared-mime-info amd64 2.1-2 [454
[command output truncated]
age automake.
Preparing to unpack .../10-automake_1%3a1.16.5-1.3_all.deb ...
Unpacking automake (1:1.16.5-1.3) ...
Selecting previously unselected package libbrotli-dev:amd64.
Preparing to unpack .../11-libbrotli-dev_1.0.9-2build6_amd64.deb ...
Unpacking libbrotli-dev:amd64 (1.0.9-2build6) ...
Selecting previously unselected package libltdl7:amd64.
Preparing to unpack .../12-libltdl7_2.4.6-15build2_amd64.deb ...
Unpacking libltdl7:amd64 (2.4.6-15build2) ...
Selecting previously unselected package libltdl-dev:amd64.
Preparing to unpack .../13-libltdl-dev_2.4.6-15build2_amd64.deb ...
Unpacking libltdl-dev:amd64 (2.4.6-15build2) ...
Selecting previously unselected package libssl-dev:amd64.
Preparing to unpack .../14-libssl-dev_3.0.2-0ubuntu1.19_amd64.deb ...
Unpacking libssl-dev:amd64 (3.0.2-0ubuntu1.19) ...
Selecting previously unselected package libtool.
Preparing to unpack .../15-libtool_2.4.6-15build2_all.deb ...
Unpacking libtool (2.4.6-15build2) ...
Selecting previously unselected package libzstd-dev:amd64.
Preparing to unpack .../16-libzstd-dev_1.4.8+dfsg-3build1_amd64.deb ...
Unpacking libzstd-dev:amd64 (1.4.8+dfsg-3build1) ...
Selecting previously unselected package pkg-config.
Preparing to unpack .../17-pkg-config_0.29.2-1ubuntu3_amd64.deb ...
Unpacking pkg-config (0.29.2-1ubuntu3) ...
Selecting previously unselected package zlib1g-dev:amd64.
Preparing to unpack .../18-zlib1g-dev_1%3a1.2.11.dfsg-2ubuntu9.2_amd64.deb ...
Unpacking zlib1g-dev:amd64 (1:1.2.11.dfsg-2ubuntu9.2) ...
Setting up libzstd-dev:amd64 (1.4.8+dfsg-3build1) ...
Setting up xdg-user-dirs (0.17-2ubuntu4) ...
Setting up libglib2.0-0:amd64 (2.72.4-0ubuntu2.6) ...
No schema files found: doing nothing.
Setting up autotools-dev (20220109.1) ...
Setting up libglib2.0-data (2.72.4-0ubuntu2.6) ...
Setting up libsigsegv2:amd64 (2.13-1ubuntu3) ...
Setting up libssl-dev:amd64 (3.0.2-0ubuntu1.19) ...
Setting up pkg-config (0.29.2-1ubuntu3) ...
Setting up libltdl7:amd64 (2.4.6-15build2) ...
Setting up zlib1g-dev:amd64 (1:1.2.11.dfsg-2ubuntu9.2) ...
Setting up libbrotli-dev:amd64 (1.0.9-2build6) ...
Setting up libicu70:amd64 (70.1-2) ...
Setting up libtool (2.4.6-15build2) ...
Setting up m4 (1.4.18-5ubuntu2) ...
Setting up autoconf (2.71-2) ...
Setting up libxml2:amd64 (2.9.13+dfsg-1ubuntu0.9) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/automake.1.gz because associated file /usr/share/man/man1/automake-1.16.1.gz (of link group automake) doesn't exist
update-alternatives: warning: skip creation of /usr/share/man/man1/aclocal.1.gz because associated file /usr/share/man/man1/aclocal-1.16.1.gz (of link group automake) doesn't exist
Setting up libltdl-dev:amd64 (2.4.6-15build2) ...
Setting up shared-mime-info (2.1-2) ...
Processing triggers for libc-bin (2.35-0ubuntu3.10) ...
Show reasoning
Good, now I have all the dependencies installed. Let me navigate to the curl source directory and configure it with the required options. I need to:
1. Navigate to the curl source directory
2. Run autoreconf if needed
3. Configure with SSL (OpenSSL for TLS v1.3), brotli, zlib, and zstd support
4. Compile
5. Install to /home/peter/result
6. Create a symlink from /home/peter/result/curl to the actual binary
compile-bench> cd /home/peter/curl-8.16.0 && autoreconf -fi libtoolize: putting auxiliary files in '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
libtoolize: copying file 'm4/libtool.m4'
libtoolize: copying file 'm4/ltoptions.m4'
libtoolize: copying file 'm4/ltsugar.m4'
libtoolize: copying file 'm4/ltversion.m4'
libtoolize: copying file 'm4/lt~obsolete.m4'
libtoolize: Remember to add 'LT_INIT' to configure.ac.
configure.ac:128: installing './compile'
configure.ac:134: installing './missing'
docs/examples/Makefile.am: installing './depcomp'
↓ 13 lines
libtoolize: putting auxiliary files in '.'. libtoolize: copying file './ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. libtoolize: copying file 'm4/libtool.m4' libtoolize: copying file 'm4/ltoptions.m4' libtoolize: copying file 'm4/ltsugar.m4' libtoolize: copying file 'm4/ltversion.m4' libtoolize: copying file 'm4/lt~obsolete.m4' libtoolize: Remember to add 'LT_INIT' to configure.ac. configure.ac:128: installing './compile' configure.ac:134: installing './missing' docs/examples/Makefile.am: installing './depcomp'
Show reasoning
Now I need to configure curl with the specified features. Let me configure it with:
- SSL support (TLS v1.3) - using OpenSSL
- brotli support
- zlib support
- zstd support
- Install prefix set to /home/peter/result
Let me run the configure command with appropriate flags.
compile-bench> cd /home/peter/curl-8.16.0 && ./configure --prefix=/home/peter/result --with-ssl --with-brotli --with-zlib --with-zstd checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for ar... /usr/bin/ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking how to run the C preprocessor... gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for grep that handles long lines and -e... (cached) /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking if OS is AIX (to define _ALL_SOURCE)... no
checking if _THREAD_SAFE is already defin
[command output truncated]
ibrary is required... no
checking for gethostbyname... yes
checking whether build target is a native Windows one... (cached) no
checking for proto/bsdsocket.h... no
checking for connect in libraries... yes
checking for sys/types.h... (cached) yes
checking for monotonic clock_gettime... yes
checking for clock_gettime in libraries... no additional lib required
checking if monotonic clock_gettime works... yes
checking for sys/types.h... (cached) yes
checking for raw monotonic clock_gettime... yes
checking for pkg-config... /usr/bin/pkg-config
checking for zlib options with pkg-config... found
checking for zlib.h... yes
configure: found both libz and libz.h header
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libbrotlidec options with pkg-config... found
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libbrotlicommon options with pkg-config... found
checking for BrotliDecoderDecompress in -lbrotlidec... yes
checking for brotli/decode.h... yes
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libzstd options with pkg-config... found
checking for ZSTD_createDStream in -lzstd... yes
checking for zstd.h... yes
checking whether to enable IPv6... yes
checking if struct sockaddr_in6 has sin6_scope_id member... yes
checking if argv can be written to... yes
checking if GSS-API support is requested... no
checking whether to enable Windows native SSL/TLS... no
checking whether to enable Amiga native SSL/TLS (AmiSSL v5)... no
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for openssl options with pkg-config... found
configure: pkg-config: SSL_LIBS: "-lssl -lcrypto"
configure: pkg-config: SSL_LDFLAGS: ""
configure: pkg-config: SSL_CPPFLAGS: ""
checking for HMAC_Update in -lcrypto... yes
checking for SSL_connect in -lssl... yes
checking for openssl/x509.h... yes
checking for openssl/rsa.h... yes
checking for openssl/crypto.h... yes
checking for openssl/pem.h... yes
checking for openssl/ssl.h... yes
checking for openssl/err.h... yes
checking for BoringSSL... no
checking for AWS-LC... no
checking for LibreSSL... no
checking for OpenSSL >= v3... yes
checking for SSL_set_quic_use_legacy_codepoint... no
checking for SSL_set_quic_tls_cbs... no
configure: OpenSSL version does not speak any known QUIC API
checking for SRP support in OpenSSL... yes
checking for QUIC support and OpenSSL >= 3.3... no
configure: built with one SSL backend
checking default CA cert bundle/path... configure: want unset ca /etc/ssl/certs/ca-certificates.crt
/etc/ssl/certs/ca-certificates.crt
/etc/ssl/certs (capath)
checking whether to use OpenSSL's built-in CA store... no
checking CA cert bundle path to embed in the curl tool... no
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libpsl options with pkg-config... no
checking for psl_builtin in -lpsl... no
configure: error: libpsl libs and/or directories were not found where specified!
↓ 132 lines
checking whether to enable maintainer-specific portions of Makefiles... no checking whether make supports nested variables... yes checking whether to enable debug build options... no checking whether to enable compiler optimizer... (assumed) yes checking whether to enable strict compiler warnings... no checking whether to enable compiler warnings as errors... no checking whether to enable curl debug memory tracking... no checking whether to enable hiding of library internal symbols... yes checking whether to enable c-ares for DNS lookups... no checking whether to disable dependency on -lrt... (assumed no) checking whether to enable HTTPSRR support... no checking whether to enable ECH support... no checking whether to enable SSL session export support... no checking for path separator... : checking for sed... /usr/bin/sed checking for grep... /usr/bin/grep checking that grep -E works... yes checking for ar... /usr/bin/ar checking for a BSD-compatible install... /usr/bin/install -c checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking how to run the C preprocessor... gcc -E checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for stdatomic.h... yes checking if _Atomic is available... yes checking for a sed that does not truncate output... (cached) /usr/bin/sed checking for code coverage support... no checking whether build environment is sane... yes checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... gcc3 checking curl version... 8.16.0 checking for perl... /usr/bin/perl checking for httpd... no checking for apache2... no checking for apxs... no configure: httpd/apache2 not in PATH, http tests disabled configure: apxs not in PATH, http tests disabled checking for danted... no checking for danted... no checking for nghttpx... no checking for caddy... no checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... /usr/bin/grep -E checking if OS is AIX (to define _ALL_SOURCE)... no checking if _THREAD_SAFE is already defin [command output truncated] ibrary is required... no checking for gethostbyname... yes checking whether build target is a native Windows one... (cached) no checking for proto/bsdsocket.h... no checking for connect in libraries... yes checking for sys/types.h... (cached) yes checking for monotonic clock_gettime... yes checking for clock_gettime in libraries... no additional lib required checking if monotonic clock_gettime works... yes checking for sys/types.h... (cached) yes checking for raw monotonic clock_gettime... yes checking for pkg-config... /usr/bin/pkg-config checking for zlib options with pkg-config... found checking for zlib.h... yes configure: found both libz and libz.h header checking for pkg-config... (cached) /usr/bin/pkg-config checking for libbrotlidec options with pkg-config... found checking for pkg-config... (cached) /usr/bin/pkg-config checking for libbrotlicommon options with pkg-config... found checking for BrotliDecoderDecompress in -lbrotlidec... yes checking for brotli/decode.h... yes checking for pkg-config... (cached) /usr/bin/pkg-config checking for libzstd options with pkg-config... found checking for ZSTD_createDStream in -lzstd... yes checking for zstd.h... yes checking whether to enable IPv6... yes checking if struct sockaddr_in6 has sin6_scope_id member... yes checking if argv can be written to... yes checking if GSS-API support is requested... no checking whether to enable Windows native SSL/TLS... no checking whether to enable Amiga native SSL/TLS (AmiSSL v5)... no checking for pkg-config... (cached) /usr/bin/pkg-config checking for openssl options with pkg-config... found configure: pkg-config: SSL_LIBS: "-lssl -lcrypto" configure: pkg-config: SSL_LDFLAGS: "" configure: pkg-config: SSL_CPPFLAGS: "" checking for HMAC_Update in -lcrypto... yes checking for SSL_connect in -lssl... yes checking for openssl/x509.h... yes checking for openssl/rsa.h... yes checking for openssl/crypto.h... yes checking for openssl/pem.h... yes checking for openssl/ssl.h... yes checking for openssl/err.h... yes checking for BoringSSL... no checking for AWS-LC... no checking for LibreSSL... no checking for OpenSSL >= v3... yes checking for SSL_set_quic_use_legacy_codepoint... no checking for SSL_set_quic_tls_cbs... no configure: OpenSSL version does not speak any known QUIC API checking for SRP support in OpenSSL... yes checking for QUIC support and OpenSSL >= 3.3... no configure: built with one SSL backend checking default CA cert bundle/path... configure: want unset ca /etc/ssl/certs/ca-certificates.crt /etc/ssl/certs/ca-certificates.crt /etc/ssl/certs (capath) checking whether to use OpenSSL's built-in CA store... no checking CA cert bundle path to embed in the curl tool... no checking for pkg-config... (cached) /usr/bin/pkg-config checking for libpsl options with pkg-config... no checking for psl_builtin in -lpsl... no configure: error: libpsl libs and/or directories were not found where specified!
Show reasoning
The configure script failed because it couldn't find libpsl. Let me install it and retry.
compile-bench> sudo DEBIAN_FRONTEND=noninteractive apt-get install -y libpsl-dev
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 3%
Reading package lists... 3%
Reading package lists... 4%
Reading package lists... 4%
Reading package lists... 41%
Reading package lists... 41%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 51%
Reading package lists... 51%
Reading package lists... 67%
Reading package lists... 67%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 80%
Reading package lists... 80%
Reading package lists... 96%
Reading package lists... 96%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... Done
Building dependency tree... 0%
Building dependency tree... 0%
Building dependency tree... 50%
Building dependency tree... 50%
Building dependency tree... Done
Reading state information... 0%
Reading state information... 1%
Reading state information... Done
The following NEW packages will be installed:
libpsl-dev
0 upgraded, 1 newly installed, 0 to remove and 10 not upgraded.
Need to get 77.9 kB of archives.
After this operation, 214 kB of additional disk space will be used.
0% [Working]
Get:1 http://archive.ubuntu.com/ubuntu jammy/main amd64 libpsl-dev amd64 0.21.0-1.2build2 [77.9 kB]
15% [1 libpsl-dev 14.2 kB/77.9 kB 18%]
100% [Working]
Fetched 77.9 kB in 0s (186 kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package libpsl-dev:amd64.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 11669 files and directories currently installed.)
Preparing to unpack .../libpsl-dev_0.21.0-1.2build2_amd64.deb ...
Unpacking libpsl-dev:amd64 (0.21.0-1.2build2) ...
Setting up libpsl-dev:amd64 (0.21.0-1.2build2) ...
↓ 17 lines
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 3%
Reading package lists... 3%
Reading package lists... 4%
Reading package lists... 4%
Reading package lists... 41%
Reading package lists... 41%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 51%
Reading package lists... 51%
Reading package lists... 67%
Reading package lists... 67%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 80%
Reading package lists... 80%
Reading package lists... 96%
Reading package lists... 96%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... Done
Building dependency tree... 0%
Building dependency tree... 0%
Building dependency tree... 50%
Building dependency tree... 50%
Building dependency tree... Done
Reading state information... 0%
Reading state information... 1%
Reading state information... Done
The following NEW packages will be installed:
libpsl-dev
0 upgraded, 1 newly installed, 0 to remove and 10 not upgraded.
Need to get 77.9 kB of archives.
After this operation, 214 kB of additional disk space will be used.
0% [Working]
Get:1 http://archive.ubuntu.com/ubuntu jammy/main amd64 libpsl-dev amd64 0.21.0-1.2build2 [77.9 kB]
15% [1 libpsl-dev 14.2 kB/77.9 kB 18%]
100% [Working]
Fetched 77.9 kB in 0s (186 kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package libpsl-dev:amd64.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 11669 files and directories currently installed.)
Preparing to unpack .../libpsl-dev_0.21.0-1.2build2_amd64.deb ...
Unpacking libpsl-dev:amd64 (0.21.0-1.2build2) ...
Setting up libpsl-dev:amd64 (0.21.0-1.2build2) ...
Show reasoning
Good, now let me try to configure again.
compile-bench> cd /home/peter/curl-8.16.0 && ./configure --prefix=/home/peter/result --with-ssl --with-brotli --with-zlib --with-zstd checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for ar... /usr/bin/ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking how to run the C preprocessor... gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for grep that handles long lines and -e... (cached) /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking if OS is AIX (to define _ALL_SOURCE)... no
checking if _THREAD_SAFE is already defin
[command output truncated]
Makefile
config.status: creating tests/server/Makefile
config.status: creating tests/libtest/Makefile
config.status: creating tests/unit/Makefile
config.status: creating tests/tunit/Makefile
config.status: creating tests/http/config.ini
config.status: creating tests/http/Makefile
config.status: creating packages/Makefile
config.status: creating packages/vms/Makefile
config.status: creating libcurl.pc
config.status: creating curl-config
config.status: creating lib/curl_config.h
config.status: executing depfiles commands
config.status: executing libtool commands
configure: Configured to build curl/libcurl:
Host setup: x86_64-pc-linux-gnu
Install prefix: /home/peter/result
Compiler: gcc
CFLAGS: -Werror-implicit-function-declaration -O2 -Wno-system-headers
CFLAGS extras:
CPPFLAGS: -D_GNU_SOURCE
LDFLAGS:
curl-config:
LIBS: -lpsl -lssl -lcrypto -lssl -lcrypto -lzstd -lzstd -lbrotlidec -lbrotlidec -lbrotlicommon -lz
curl version: 8.16.0
SSL: enabled (OpenSSL v3+)
SSH: no (--with-{libssh,libssh2})
zlib: enabled
brotli: enabled (libbrotlidec)
zstd: enabled (libzstd)
GSS-API: no (--with-gssapi)
GSASL: no (libgsasl not found)
TLS-SRP: enabled
resolver: POSIX threaded
IPv6: enabled
Unix sockets: enabled
IDN: no (--with-{libidn2,winidn})
Build docs: enabled (--disable-docs)
Build libcurl: Shared=yes, Static=yes
Built-in manual: enabled
--libcurl option: enabled (--disable-libcurl-option)
Verbose errors: enabled (--disable-verbose)
Code coverage: disabled
SSPI: no (--enable-sspi)
ca cert bundle: /etc/ssl/certs/ca-certificates.crt
ca cert path: /etc/ssl/certs
ca cert embed: no
ca fallback: no
LDAP: no (--enable-ldap / --with-ldap-lib / --with-lber-lib)
LDAPS: no (--enable-ldaps)
IPFS/IPNS: enabled
RTSP: enabled
RTMP: no (--with-librtmp)
PSL: enabled
Alt-svc: enabled (--disable-alt-svc)
Headers API: enabled (--disable-headers-api)
HSTS: enabled (--disable-hsts)
HTTP1: enabled (internal)
HTTP2: no (--with-nghttp2)
HTTP3: no (--with-ngtcp2 --with-nghttp3, --with-quiche, --with-openssl-quic)
ECH: no (--enable-ech)
HTTPS RR: no (--enable-httpsrr)
SSLS-EXPORT: no (--enable-ssls-export)
Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd
↓ 136 lines
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for ar... /usr/bin/ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking how to run the C preprocessor... gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for grep that handles long lines and -e... (cached) /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking if OS is AIX (to define _ALL_SOURCE)... no
checking if _THREAD_SAFE is already defin
[command output truncated]
Makefile
config.status: creating tests/server/Makefile
config.status: creating tests/libtest/Makefile
config.status: creating tests/unit/Makefile
config.status: creating tests/tunit/Makefile
config.status: creating tests/http/config.ini
config.status: creating tests/http/Makefile
config.status: creating packages/Makefile
config.status: creating packages/vms/Makefile
config.status: creating libcurl.pc
config.status: creating curl-config
config.status: creating lib/curl_config.h
config.status: executing depfiles commands
config.status: executing libtool commands
configure: Configured to build curl/libcurl:
Host setup: x86_64-pc-linux-gnu
Install prefix: /home/peter/result
Compiler: gcc
CFLAGS: -Werror-implicit-function-declaration -O2 -Wno-system-headers
CFLAGS extras:
CPPFLAGS: -D_GNU_SOURCE
LDFLAGS:
curl-config:
LIBS: -lpsl -lssl -lcrypto -lssl -lcrypto -lzstd -lzstd -lbrotlidec -lbrotlidec -lbrotlicommon -lz
curl version: 8.16.0
SSL: enabled (OpenSSL v3+)
SSH: no (--with-{libssh,libssh2})
zlib: enabled
brotli: enabled (libbrotlidec)
zstd: enabled (libzstd)
GSS-API: no (--with-gssapi)
GSASL: no (libgsasl not found)
TLS-SRP: enabled
resolver: POSIX threaded
IPv6: enabled
Unix sockets: enabled
IDN: no (--with-{libidn2,winidn})
Build docs: enabled (--disable-docs)
Build libcurl: Shared=yes, Static=yes
Built-in manual: enabled
--libcurl option: enabled (--disable-libcurl-option)
Verbose errors: enabled (--disable-verbose)
Code coverage: disabled
SSPI: no (--enable-sspi)
ca cert bundle: /etc/ssl/certs/ca-certificates.crt
ca cert path: /etc/ssl/certs
ca cert embed: no
ca fallback: no
LDAP: no (--enable-ldap / --with-ldap-lib / --with-lber-lib)
LDAPS: no (--enable-ldaps)
IPFS/IPNS: enabled
RTSP: enabled
RTMP: no (--with-librtmp)
PSL: enabled
Alt-svc: enabled (--disable-alt-svc)
Headers API: enabled (--disable-headers-api)
HSTS: enabled (--disable-hsts)
HTTP1: enabled (internal)
HTTP2: no (--with-nghttp2)
HTTP3: no (--with-ngtcp2 --with-nghttp3, --with-quiche, --with-openssl-quic)
ECH: no (--enable-ech)
HTTPS RR: no (--enable-httpsrr)
SSLS-EXPORT: no (--enable-ssls-export)
Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd
Show reasoning
Great! The configure script completed successfully. I can see in the output:
- SSL: enabled (OpenSSL v3+)
- zlib: enabled
- brotli: enabled (libbrotlidec)
- zstd: enabled (libzstd)
- Install prefix: /home/peter/result
Now I need to:
1. Compile curl with make
2. Install it to /home/peter/result
3. Create a symlink from /home/peter/result/curl to the actual binary
4. Verify the build supports TLS v1.3
Let me proceed with the compilation.
compile-bench> cd /home/peter/curl-8.16.0 && make -j$(nproc) Making all in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make all-am
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
CC libcurl_la-altsvc.lo
CC libcurl_la-amigaos.lo
CC libcurl_la-asyn-ares.lo
CC libcurl_la-asyn-base.lo
CC libcurl_la-asyn-thrdd.lo
CC libcurl_la-bufq.lo
CC libcurl_la-bufref.lo
CC libcurl_la-cf-h1-proxy.lo
CC libcurl_la-cf-h2-proxy.lo
CC libcurl_la-cf-haproxy.lo
CC libcurl_la-cf-https-connect.lo
CC libcurl_la-cf-ip-happy.lo
CC libcurl_la-cf-socket.lo
CC libcurl_la-cfilters.lo
CC libcurl_la-conncache.lo
CC libcurl_la-connect.lo
CC libcurl_la-content_encoding.lo
CC libcurl_la-cookie.lo
CC libcurl_la-cshutdn.lo
CC libcurl_la-curl_addrinfo.lo
CC libcurl_la-curl_des.lo
CC libcurl_la-curl_endian.lo
CC libcurl_la-curl_fnmatch.lo
CC libcurl_la-curl_get_line.lo
CC libcurl_la-curl_gethostname.lo
CC libcurl_la-curl_gssapi.lo
CC libcurl_la-curl_memrchr.lo
CC libcurl_la-curl_ntlm_core.lo
CC libcurl_la-curl_range.lo
CC libcurl_la-curl_rtmp.lo
CC libcurl_la-curl_sasl.lo
CC libcurl_la-curl_sha512_256.lo
CC libcurl_la-curl_sspi.lo
CC libcurl_la-curl_threads.lo
CC libcurl_la-curl_trc.lo
CC libcurl_la-cw-out.lo
CC libcurl_la-cw-pause.lo
CC libcurl_la-dict.lo
CC libcurl_la-doh.lo
CC libcurl_la-dynhds.lo
CC libcurl_la-easy.lo
CC libcurl_la-easygetopt.lo
CC libcurl_la-easyoptions.lo
CC libcurl_la-escape.lo
CC libcurl_la-fake_addrinfo.lo
CC libcurl_la-file.lo
CC libcurl_la-fileinfo.lo
CC libcurl_la-fopen.lo
CC libcurl_la-formdata.lo
CC libcurl_la-ftp.lo
CC libcurl_la-ftplistparser.lo
CC libcurl_la-getenv.lo
CC libcurl_la-getinfo.lo
CC libcurl_la-gopher.lo
CC libcurl_la-hash.lo
CC libcurl_la-headers.lo
CC libcurl_la-hmac.lo
CC libcurl_la-hostip.lo
CC libcurl_la-hostip4.lo
CC libcurl_la-hostip6.lo
CC libcurl_la-hsts.lo
CC libcurl_la-http.lo
CC libcurl_la-http1.lo
CC libcurl_la-http2.lo
CC libcurl_la-http_aws_sigv4.lo
CC libcurl_la-http_chunks.lo
[command output truncated]
CC ../lib/curlx/curl-wait.o
CC ../lib/curlx/curl-warnless.o
CC curlinfo.o
CC libcurltool_la-config2setopts.lo
CC libcurltool_la-slist_wc.lo
CC libcurltool_la-terminal.lo
CC libcurltool_la-tool_bname.lo
CC libcurltool_la-tool_cb_dbg.lo
CC libcurltool_la-tool_cb_hdr.lo
CC libcurltool_la-tool_cb_prg.lo
CC libcurltool_la-tool_cb_rea.lo
CC libcurltool_la-tool_cb_see.lo
CC libcurltool_la-tool_cb_soc.lo
CC libcurltool_la-tool_cb_wrt.lo
CC libcurltool_la-tool_cfgable.lo
CC libcurltool_la-tool_dirhie.lo
CC libcurltool_la-tool_doswin.lo
CC libcurltool_la-tool_easysrc.lo
CC libcurltool_la-tool_filetime.lo
CC libcurltool_la-tool_findfile.lo
CC libcurltool_la-tool_formparse.lo
CC libcurltool_la-tool_getparam.lo
CC libcurltool_la-tool_getpass.lo
CC libcurltool_la-tool_help.lo
CC libcurltool_la-tool_helpers.lo
CC libcurltool_la-tool_ipfs.lo
CC libcurltool_la-tool_libinfo.lo
CC libcurltool_la-tool_listhelp.lo
CC libcurltool_la-tool_main.lo
CC libcurltool_la-tool_msgs.lo
CC libcurltool_la-tool_operate.lo
CC libcurltool_la-tool_operhlp.lo
CC libcurltool_la-tool_paramhlp.lo
CC libcurltool_la-tool_parsecfg.lo
CC libcurltool_la-tool_progress.lo
CC libcurltool_la-tool_setopt.lo
CC libcurltool_la-tool_ssls.lo
CC libcurltool_la-tool_stderr.lo
CC libcurltool_la-tool_strdup.lo
CC libcurltool_la-tool_urlglob.lo
CC libcurltool_la-tool_util.lo
CC libcurltool_la-tool_vms.lo
CC libcurltool_la-tool_writeout.lo
CC libcurltool_la-tool_writeout_json.lo
CC libcurltool_la-tool_xattr.lo
CC libcurltool_la-var.lo
CC ../lib/curlx/libcurltool_la-base64.lo
CC ../lib/curlx/libcurltool_la-multibyte.lo
CC ../lib/curlx/libcurltool_la-dynbuf.lo
CC ../lib/curlx/libcurltool_la-nonblock.lo
CC ../lib/curlx/libcurltool_la-strparse.lo
CC ../lib/curlx/libcurltool_la-timediff.lo
CC ../lib/curlx/libcurltool_la-timeval.lo
CC ../lib/curlx/libcurltool_la-version_win32.lo
CC ../lib/curlx/libcurltool_la-wait.lo
CC ../lib/curlx/libcurltool_la-warnless.lo
CC curl-tool_hugehelp.o
CC curl-tool_ca_embed.o
CCLD curlinfo
CCLD libcurltool.la
CCLD curl
make[1]: Leaving directory '/home/peter/curl-8.16.0/src'
Making all in scripts
make[1]: Entering directory '/home/peter/curl-8.16.0/scripts'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/home/peter/curl-8.16.0/scripts'
make[1]: Entering directory '/home/peter/curl-8.16.0'
make[1]: Nothing to be done for 'all-am'.
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 141 lines
Making all in lib make[1]: Entering directory '/home/peter/curl-8.16.0/lib' make all-am make[2]: Entering directory '/home/peter/curl-8.16.0/lib' CC libcurl_la-altsvc.lo CC libcurl_la-amigaos.lo CC libcurl_la-asyn-ares.lo CC libcurl_la-asyn-base.lo CC libcurl_la-asyn-thrdd.lo CC libcurl_la-bufq.lo CC libcurl_la-bufref.lo CC libcurl_la-cf-h1-proxy.lo CC libcurl_la-cf-h2-proxy.lo CC libcurl_la-cf-haproxy.lo CC libcurl_la-cf-https-connect.lo CC libcurl_la-cf-ip-happy.lo CC libcurl_la-cf-socket.lo CC libcurl_la-cfilters.lo CC libcurl_la-conncache.lo CC libcurl_la-connect.lo CC libcurl_la-content_encoding.lo CC libcurl_la-cookie.lo CC libcurl_la-cshutdn.lo CC libcurl_la-curl_addrinfo.lo CC libcurl_la-curl_des.lo CC libcurl_la-curl_endian.lo CC libcurl_la-curl_fnmatch.lo CC libcurl_la-curl_get_line.lo CC libcurl_la-curl_gethostname.lo CC libcurl_la-curl_gssapi.lo CC libcurl_la-curl_memrchr.lo CC libcurl_la-curl_ntlm_core.lo CC libcurl_la-curl_range.lo CC libcurl_la-curl_rtmp.lo CC libcurl_la-curl_sasl.lo CC libcurl_la-curl_sha512_256.lo CC libcurl_la-curl_sspi.lo CC libcurl_la-curl_threads.lo CC libcurl_la-curl_trc.lo CC libcurl_la-cw-out.lo CC libcurl_la-cw-pause.lo CC libcurl_la-dict.lo CC libcurl_la-doh.lo CC libcurl_la-dynhds.lo CC libcurl_la-easy.lo CC libcurl_la-easygetopt.lo CC libcurl_la-easyoptions.lo CC libcurl_la-escape.lo CC libcurl_la-fake_addrinfo.lo CC libcurl_la-file.lo CC libcurl_la-fileinfo.lo CC libcurl_la-fopen.lo CC libcurl_la-formdata.lo CC libcurl_la-ftp.lo CC libcurl_la-ftplistparser.lo CC libcurl_la-getenv.lo CC libcurl_la-getinfo.lo CC libcurl_la-gopher.lo CC libcurl_la-hash.lo CC libcurl_la-headers.lo CC libcurl_la-hmac.lo CC libcurl_la-hostip.lo CC libcurl_la-hostip4.lo CC libcurl_la-hostip6.lo CC libcurl_la-hsts.lo CC libcurl_la-http.lo CC libcurl_la-http1.lo CC libcurl_la-http2.lo CC libcurl_la-http_aws_sigv4.lo CC libcurl_la-http_chunks.lo [command output truncated] CC ../lib/curlx/curl-wait.o CC ../lib/curlx/curl-warnless.o CC curlinfo.o CC libcurltool_la-config2setopts.lo CC libcurltool_la-slist_wc.lo CC libcurltool_la-terminal.lo CC libcurltool_la-tool_bname.lo CC libcurltool_la-tool_cb_dbg.lo CC libcurltool_la-tool_cb_hdr.lo CC libcurltool_la-tool_cb_prg.lo CC libcurltool_la-tool_cb_rea.lo CC libcurltool_la-tool_cb_see.lo CC libcurltool_la-tool_cb_soc.lo CC libcurltool_la-tool_cb_wrt.lo CC libcurltool_la-tool_cfgable.lo CC libcurltool_la-tool_dirhie.lo CC libcurltool_la-tool_doswin.lo CC libcurltool_la-tool_easysrc.lo CC libcurltool_la-tool_filetime.lo CC libcurltool_la-tool_findfile.lo CC libcurltool_la-tool_formparse.lo CC libcurltool_la-tool_getparam.lo CC libcurltool_la-tool_getpass.lo CC libcurltool_la-tool_help.lo CC libcurltool_la-tool_helpers.lo CC libcurltool_la-tool_ipfs.lo CC libcurltool_la-tool_libinfo.lo CC libcurltool_la-tool_listhelp.lo CC libcurltool_la-tool_main.lo CC libcurltool_la-tool_msgs.lo CC libcurltool_la-tool_operate.lo CC libcurltool_la-tool_operhlp.lo CC libcurltool_la-tool_paramhlp.lo CC libcurltool_la-tool_parsecfg.lo CC libcurltool_la-tool_progress.lo CC libcurltool_la-tool_setopt.lo CC libcurltool_la-tool_ssls.lo CC libcurltool_la-tool_stderr.lo CC libcurltool_la-tool_strdup.lo CC libcurltool_la-tool_urlglob.lo CC libcurltool_la-tool_util.lo CC libcurltool_la-tool_vms.lo CC libcurltool_la-tool_writeout.lo CC libcurltool_la-tool_writeout_json.lo CC libcurltool_la-tool_xattr.lo CC libcurltool_la-var.lo CC ../lib/curlx/libcurltool_la-base64.lo CC ../lib/curlx/libcurltool_la-multibyte.lo CC ../lib/curlx/libcurltool_la-dynbuf.lo CC ../lib/curlx/libcurltool_la-nonblock.lo CC ../lib/curlx/libcurltool_la-strparse.lo CC ../lib/curlx/libcurltool_la-timediff.lo CC ../lib/curlx/libcurltool_la-timeval.lo CC ../lib/curlx/libcurltool_la-version_win32.lo CC ../lib/curlx/libcurltool_la-wait.lo CC ../lib/curlx/libcurltool_la-warnless.lo CC curl-tool_hugehelp.o CC curl-tool_ca_embed.o CCLD curlinfo CCLD libcurltool.la CCLD curl make[1]: Leaving directory '/home/peter/curl-8.16.0/src' Making all in scripts make[1]: Entering directory '/home/peter/curl-8.16.0/scripts' make[1]: Nothing to be done for 'all'. make[1]: Leaving directory '/home/peter/curl-8.16.0/scripts' make[1]: Entering directory '/home/peter/curl-8.16.0' make[1]: Nothing to be done for 'all-am'. make[1]: Leaving directory '/home/peter/curl-8.16.0'
Show reasoning
Good, the compilation succeeded. Now I need to install it to /home/peter/result.
compile-bench> cd /home/peter/curl-8.16.0 && make install Making install in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
/usr/bin/mkdir -p '/home/peter/result/lib'
/bin/bash ../libtool --mode=install /usr/bin/install -c libcurl.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libcurl.so.4.8.0 /home/peter/result/lib/libcurl.so.4.8.0
libtool: install: (cd /home/peter/result/lib && { ln -s -f libcurl.so.4.8.0 libcurl.so.4 || { rm -f libcurl.so.4 && ln -s libcurl.so.4.8.0 libcurl.so.4; }; })
libtool: install: (cd /home/peter/result/lib && { ln -s -f libcurl.so.4.8.0 libcurl.so || { rm -f libcurl.so && ln -s libcurl.so.4.8.0 libcurl.so; }; })
libtool: install: /usr/bin/install -c .libs/libcurl.lai /home/peter/result/lib/libcurl.la
libtool: install: /usr/bin/install -c .libs/libcurl.a /home/peter/result/lib/libcurl.a
libtool: install: chmod 644 /home/peter/result/lib/libcurl.a
libtool: install: ranlib /home/peter/result/lib/libcurl.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
/home/peter/result/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/peter/curl-8.16.0/lib'
make[1]: Leaving directory '/home/peter/curl-8.16.0/lib'
Making install in docs
make[1]: Entering directory '/home/peter/curl-8.16.0/docs'
Making install in .
make[2]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/home/peter/result/share/man/man1'
/usr/bin/install -c -m 644 curl-config.1 wcurl.1 '/home/peter/result/share/man/man1'
make[3]: Leaving directory '/home/peter/curl-8.16.0/docs'
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs'
Making install in cmdline-opts
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/home/peter/result/share/man/man1'
/u
[command output truncated]
ng directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/home/peter/result/share/aclocal'
/usr/bin/install -c -m 644 libcurl.m4 '/home/peter/result/share/aclocal'
/usr/bin/mkdir -p '/home/peter/result/share/man/man3'
/usr/bin/install -c -m 644 curl_easy_cleanup.3 curl_easy_duphandle.3 curl_easy_escape.3 curl_easy_getinfo.3 curl_easy_header.3 curl_easy_init.3 curl_easy_nextheader.3 curl_easy_option_by_id.3 curl_easy_option_by_name.3 curl_easy_option_next.3 curl_easy_pause.3 curl_easy_perform.3 curl_easy_recv.3 curl_easy_reset.3 curl_easy_send.3 curl_easy_setopt.3 curl_easy_ssls_export.3 curl_easy_ssls_import.3 curl_easy_strerror.3 curl_easy_unescape.3 curl_easy_upkeep.3 curl_escape.3 curl_formadd.3 curl_formfree.3 curl_formget.3 curl_free.3 curl_getdate.3 curl_getenv.3 curl_global_cleanup.3 curl_global_init.3 curl_global_init_mem.3 curl_global_sslset.3 curl_global_trace.3 curl_mime_addpart.3 curl_mime_data.3 curl_mime_data_cb.3 curl_mime_encoder.3 curl_mime_filedata.3 curl_mime_filename.3 curl_mime_free.3 '/home/peter/result/share/man/man3'
/usr/bin/install -c -m 644 curl_mime_headers.3 curl_mime_init.3 curl_mime_name.3 curl_mime_subparts.3 curl_mime_type.3 curl_mprintf.3 curl_multi_add_handle.3 curl_multi_assign.3 curl_multi_cleanup.3 curl_multi_fdset.3 curl_multi_get_handles.3 curl_multi_get_offt.3 curl_multi_info_read.3 curl_multi_init.3 curl_multi_perform.3 curl_multi_poll.3 curl_multi_remove_handle.3 curl_multi_setopt.3 curl_multi_socket.3 curl_multi_socket_action.3 curl_multi_socket_all.3 curl_multi_strerror.3 curl_multi_timeout.3 curl_multi_wait.3 curl_multi_waitfds.3 curl_multi_wakeup.3 curl_pushheader_byname.3 curl_pushheader_bynum.3 curl_share_cleanup.3 curl_share_init.3 curl_share_setopt.3 curl_share_strerror.3 curl_slist_append.3 curl_slist_free_all.3 curl_strequal.3 curl_strnequal.3 curl_unescape.3 curl_url.3 curl_url_cleanup.3 curl_url_dup.3 '/home/peter/result/share/man/man3'
/usr/bin/install -c -m 644 curl_url_get.3 curl_url_set.3 curl_url_strerror.3 curl_version.3 curl_version_info.3 curl_ws_meta.3 curl_ws_recv.3 curl_ws_send.3 curl_ws_start_frame.3 libcurl-easy.3 libcurl-env-dbg.3 libcurl-env.3 libcurl-errors.3 libcurl-multi.3 libcurl-security.3 libcurl-share.3 libcurl-symbols.3 libcurl-thread.3 libcurl-tutorial.3 libcurl-url.3 libcurl-ws.3 libcurl.3 '/home/peter/result/share/man/man3'
make[6]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[4]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[3]: Leaving directory '/home/peter/curl-8.16.0'
make[2]: Leaving directory '/home/peter/curl-8.16.0'
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 69 lines
Making install in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
/usr/bin/mkdir -p '/home/peter/result/lib'
/bin/bash ../libtool --mode=install /usr/bin/install -c libcurl.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libcurl.so.4.8.0 /home/peter/result/lib/libcurl.so.4.8.0
libtool: install: (cd /home/peter/result/lib && { ln -s -f libcurl.so.4.8.0 libcurl.so.4 || { rm -f libcurl.so.4 && ln -s libcurl.so.4.8.0 libcurl.so.4; }; })
libtool: install: (cd /home/peter/result/lib && { ln -s -f libcurl.so.4.8.0 libcurl.so || { rm -f libcurl.so && ln -s libcurl.so.4.8.0 libcurl.so; }; })
libtool: install: /usr/bin/install -c .libs/libcurl.lai /home/peter/result/lib/libcurl.la
libtool: install: /usr/bin/install -c .libs/libcurl.a /home/peter/result/lib/libcurl.a
libtool: install: chmod 644 /home/peter/result/lib/libcurl.a
libtool: install: ranlib /home/peter/result/lib/libcurl.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
/home/peter/result/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/peter/curl-8.16.0/lib'
make[1]: Leaving directory '/home/peter/curl-8.16.0/lib'
Making install in docs
make[1]: Entering directory '/home/peter/curl-8.16.0/docs'
Making install in .
make[2]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/home/peter/result/share/man/man1'
/usr/bin/install -c -m 644 curl-config.1 wcurl.1 '/home/peter/result/share/man/man1'
make[3]: Leaving directory '/home/peter/curl-8.16.0/docs'
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs'
Making install in cmdline-opts
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/home/peter/result/share/man/man1'
/u
[command output truncated]
ng directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/home/peter/result/share/aclocal'
/usr/bin/install -c -m 644 libcurl.m4 '/home/peter/result/share/aclocal'
/usr/bin/mkdir -p '/home/peter/result/share/man/man3'
/usr/bin/install -c -m 644 curl_easy_cleanup.3 curl_easy_duphandle.3 curl_easy_escape.3 curl_easy_getinfo.3 curl_easy_header.3 curl_easy_init.3 curl_easy_nextheader.3 curl_easy_option_by_id.3 curl_easy_option_by_name.3 curl_easy_option_next.3 curl_easy_pause.3 curl_easy_perform.3 curl_easy_recv.3 curl_easy_reset.3 curl_easy_send.3 curl_easy_setopt.3 curl_easy_ssls_export.3 curl_easy_ssls_import.3 curl_easy_strerror.3 curl_easy_unescape.3 curl_easy_upkeep.3 curl_escape.3 curl_formadd.3 curl_formfree.3 curl_formget.3 curl_free.3 curl_getdate.3 curl_getenv.3 curl_global_cleanup.3 curl_global_init.3 curl_global_init_mem.3 curl_global_sslset.3 curl_global_trace.3 curl_mime_addpart.3 curl_mime_data.3 curl_mime_data_cb.3 curl_mime_encoder.3 curl_mime_filedata.3 curl_mime_filename.3 curl_mime_free.3 '/home/peter/result/share/man/man3'
/usr/bin/install -c -m 644 curl_mime_headers.3 curl_mime_init.3 curl_mime_name.3 curl_mime_subparts.3 curl_mime_type.3 curl_mprintf.3 curl_multi_add_handle.3 curl_multi_assign.3 curl_multi_cleanup.3 curl_multi_fdset.3 curl_multi_get_handles.3 curl_multi_get_offt.3 curl_multi_info_read.3 curl_multi_init.3 curl_multi_perform.3 curl_multi_poll.3 curl_multi_remove_handle.3 curl_multi_setopt.3 curl_multi_socket.3 curl_multi_socket_action.3 curl_multi_socket_all.3 curl_multi_strerror.3 curl_multi_timeout.3 curl_multi_wait.3 curl_multi_waitfds.3 curl_multi_wakeup.3 curl_pushheader_byname.3 curl_pushheader_bynum.3 curl_share_cleanup.3 curl_share_init.3 curl_share_setopt.3 curl_share_strerror.3 curl_slist_append.3 curl_slist_free_all.3 curl_strequal.3 curl_strnequal.3 curl_unescape.3 curl_url.3 curl_url_cleanup.3 curl_url_dup.3 '/home/peter/result/share/man/man3'
/usr/bin/install -c -m 644 curl_url_get.3 curl_url_set.3 curl_url_strerror.3 curl_version.3 curl_version_info.3 curl_ws_meta.3 curl_ws_recv.3 curl_ws_send.3 curl_ws_start_frame.3 libcurl-easy.3 libcurl-env-dbg.3 libcurl-env.3 libcurl-errors.3 libcurl-multi.3 libcurl-security.3 libcurl-share.3 libcurl-symbols.3 libcurl-thread.3 libcurl-tutorial.3 libcurl-url.3 libcurl-ws.3 libcurl.3 '/home/peter/result/share/man/man3'
make[6]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[4]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[3]: Leaving directory '/home/peter/curl-8.16.0'
make[2]: Leaving directory '/home/peter/curl-8.16.0'
make[1]: Leaving directory '/home/peter/curl-8.16.0'
Show reasoning
Good! The compilation and installation completed successfully. Now I need to:
1. Create a symlink from /home/peter/result/curl to the actual binary
2. Verify the build has the required features (SSL/TLS v1.3, brotli, zlib, zstd)
First, let me find where the curl binary was installed.
compile-bench> ls -la /home/peter/result/bin/ total 368
drwxr-xr-x 2 peter peter 4096 Sep 29 18:15 .
drwxr-xr-x 6 peter peter 4096 Sep 29 18:15 ..
-rwxr-xr-x 1 peter peter 346464 Sep 29 18:15 curl
-rwxr-xr-x 1 peter peter 5105 Sep 29 18:15 curl-config
-rwxr-xr-x 1 peter peter 10622 Sep 29 18:15 wcurl
↓ 7 lines
total 368 drwxr-xr-x 2 peter peter 4096 Sep 29 18:15 . drwxr-xr-x 6 peter peter 4096 Sep 29 18:15 .. -rwxr-xr-x 1 peter peter 346464 Sep 29 18:15 curl -rwxr-xr-x 1 peter peter 5105 Sep 29 18:15 curl-config -rwxr-xr-x 1 peter peter 10622 Sep 29 18:15 wcurl
Show reasoning
Good! The curl binary is installed at /home/peter/result/bin/curl. Now I need to create a symlink from /home/peter/result/curl to the actual binary at /home/peter/result/bin/curl.
[empty output]
Show reasoning
Good, I created the symlink. Now I need to verify that the build was successful and has all the required features:
1. SSL support (TLS v1.3)
2. brotli
3. zlib
4. zstd
Let me run curl with the version and features flags to verify.
compile-bench> /home/peter/result/bin/curl --version curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.2 zlib/1.2.11 brotli/1.0.9 zstd/1.4.8 libpsl/0.21.0
Release-Date: 2025-09-10
Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd
↓ 5 lines
curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.2 zlib/1.2.11 brotli/1.0.9 zstd/1.4.8 libpsl/0.21.0 Release-Date: 2025-09-10 Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd
Show reasoning
Great! The curl is compiled and installed. Let me verify everything the user requested:
1. ✓ Compiled curl v8.16.0 from source
2. ✓ Installed it to /home/peter/result
3. ✓ Created symlink from /home/peter/result/curl to the actual binary
4. Need to verify SSL support (TLS v1.3), brotli, zlib, and zstd
From the version output, I can see:
- SSL: "OpenSSL/3.0.2" is present
- brotli: "brotli/1.0.9" is present
- zlib: "zlib/1.2.11" is present
- zstd: "zstd/1.4.8" is present
- Features include "SSL" and "TLS-SRP"
Now let me verify the symlink and test TLS 1.3 support specifically.
lrwxrwxrwx 1 peter peter 27 Sep 29 18:15 /home/peter/result/curl -> /home/peter/result/bin/curl
Show reasoning
Now let me verify that TLS v1.3 support is properly enabled. I should test the curl binary to ensure it can actually use TLS 1.3.
compile-bench> /home/peter/result/bin/curl --tlsv1.3 --version curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.2 zlib/1.2.11 brotli/1.0.9 zstd/1.4.8 libpsl/0.21.0
Release-Date: 2025-09-10
Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd
↓ 5 lines
curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.2 zlib/1.2.11 brotli/1.0.9 zstd/1.4.8 libpsl/0.21.0 Release-Date: 2025-09-10 Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd
Show reasoning
The user wants me to verify that curl was built with TLS v1.3 support. Let me test it by making a request to a TLS 1.3 enabled site, or I can check the OpenSSL version to confirm TLS 1.3 support.
Let me verify that TLS 1.3 is actually supported by testing it.
curl: option --tlsmax: is unknown
Show reasoning
The user wants me to verify that TLS 1.3 support is working. Let me try a different approach to test TLS 1.3 support.
compile-bench> /home/peter/result/bin/curl -v --tlsv1.3 https://www.howsmyssl.com/a/check 2>&1 | grep -E "TLS|SSL|successfully" * TLSv1.3 (OUT), TLS handshake, Client hello (1):
* TLSv1.3 (IN), TLS alert, handshake failure (552):
* TLS connect error: error:0A000410:SSL routines::sslv3 alert handshake failure
curl: (35) TLS connect error: error:0A000410:SSL routines::sslv3 alert handshake failure
↓ 5 lines
* TLSv1.3 (OUT), TLS handshake, Client hello (1): * TLSv1.3 (IN), TLS alert, handshake failure (552): * TLS connect error: error:0A000410:SSL routines::sslv3 alert handshake failure curl: (35) TLS connect error: error:0A000410:SSL routines::sslv3 alert handshake failure
Show reasoning
The TLS 1.3 handshake is attempting but failing. Let me try a different test URL or without the --tlsv1.3 flag to see if SSL/TLS works at all.
compile-bench> /home/peter/result/bin/curl -v https://www.google.com 2>&1 | head -20 | grep -E "TLS|SSL|Connected" * TLSv1.3 (OUT), TLS handshake, Client hello (1):
* TLSv1.3 (IN), TLS handshake, Server hello (2):
* TLSv1.3 (IN), TLS handshake, Encrypted Extensions (8):
* TLSv1.3 (IN), TLS handshake, Certificate (11):
↓ 5 lines
* TLSv1.3 (OUT), TLS handshake, Client hello (1): * TLSv1.3 (IN), TLS handshake, Server hello (2): * TLSv1.3 (IN), TLS handshake, Encrypted Extensions (8): * TLSv1.3 (IN), TLS handshake, Certificate (11):
Show reasoning
Good! The curl binary is working with TLS 1.3. Let me verify the complete setup by checking:
1. The symlink is created
2. All required features are present
3. A final comprehensive check
Let me do a comprehensive verification of all requirements.
compile-bench> /home/peter/result/curl --version curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.2 zlib/1.2.11 brotli/1.0.9 zstd/1.4.8 libpsl/0.21.0
Release-Date: 2025-09-10
Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd
↓ 5 lines
curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.2 zlib/1.2.11 brotli/1.0.9 zstd/1.4.8 libpsl/0.21.0 Release-Date: 2025-09-10 Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd
Show reasoning
The user asked me to compile curl v8.16.0 and install it to /home/peter/result, with a symlink from /home/peter/result/curl to the actual binary. The binary should support SSL (TLS v1.3), brotli, zlib, and zstd.
Let me verify what I've accomplished:
1. ✅ Extracted the tarball from /home/peter/curl.tar.gz
2. ✅ Installed all necessary dependencies (libssl-dev, libbrotli-dev, zlib1g-dev, libzstd-dev, and libpsl-dev)
3. ✅ Ran autoreconf -fi
4. ✅ Configured with --with-ssl --with-brotli --with-zlib --with-zstd
5. ✅ Compiled successfully with make
6. ✅ Installed to /home/peter/result
7. ✅ Created symlink from /home/peter/result/curl to /home/peter/result/bin/curl
8. ✅ Verified the build
From the version output, I can see:
- curl 8.16.0 is installed
- OpenSSL/3.0.2 (SSL support) ✅
- zlib/1.2.11 ✅
- brotli/1.0.9 ✅
- zstd/1.4.8 ✅
- Features include SSL ✅
And from the TLS test with Google, I can see it's using TLSv1.3 successfully.
The symlink is working correctly as shown by:
- ls -la /home/peter/result/curl shows it points to /home/peter/result/bin/curl
- /home/peter/result/curl --version works correctly
Everything appears to be complete and working. Let me do one final comprehensive check to make sure everything is correct.
Let me do a final comprehensive verification:
compile-bench> echo "=== Symlink verification ===" && ls -la /home/peter/result/curl && echo -e "\n=== Binary location ===" && ls -la /home/peter/result/bin/curl && echo -e "\n=== Version and features ===" && /home/peter/result/curl --version === Symlink verification ===
lrwxrwxrwx 1 peter peter 27 Sep 29 18:15 /home/peter/result/curl -> /home/peter/result/bin/curl
=== Binary location ===
-rwxr-xr-x 1 peter peter 346464 Sep 29 18:15 /home/peter/result/bin/curl
=== Version and features ===
curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.2 zlib/1.2.11 brotli/1.0.9 zstd/1.4.8 libpsl/0.21.0
Release-Date: 2025-09-10
Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd
↓ 12 lines
=== Symlink verification === lrwxrwxrwx 1 peter peter 27 Sep 29 18:15 /home/peter/result/curl -> /home/peter/result/bin/curl === Binary location === -rwxr-xr-x 1 peter peter 346464 Sep 29 18:15 /home/peter/result/bin/curl === Version and features === curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.2 zlib/1.2.11 brotli/1.0.9 zstd/1.4.8 libpsl/0.21.0 Release-Date: 2025-09-10 Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd
Show reasoning
The user wants me to verify that everything is done correctly. Let me check:
1. ✅ Extracted curl v8.16.0 from /home/peter/curl.tar.gz
2. ✅ Installed dependencies (OpenSSL, brotli, zlib, zstd)
3. ✅ Configured curl with --with-ssl, --with-brotli, --with-zlib, --with-zstd
4. ✅ Compiled and installed to /home/peter/result
5. ✅ Created symlink from /home/peter/result/curl to /home/peter/result/bin/curl
6. ✅ Built with SSL support (OpenSSL/3.0.2 with TLS v1.3 support verified)
7. ✅ Built with brotli (brotli/1.0.9)
8. ✅ Built with zlib (zlib/1.2.11)
9. ✅ Built with zstd (zstd/1.4.8)
The version output clearly shows:
- curl 8.16.0
- libcurl/8.16.0 OpenSSL/3.0.2 zlib/1.2.11 brotli/1.0.9 zstd/1.4.8
- Features include: SSL, brotli, libz, zstd
- TLS 1.3 support confirmed by the test with Google (showed TLSv1.3 handshake)
Everything looks good! Let me do one more test to confirm TLS 1.3 is working properly.
=== Testing TLS 1.3 support ===
Show reasoning
The test didn't return anything. Let me try a simpler test to verify TLS 1.3 is working properly. Let me check the full output of a TLS connection.
compile-bench> /home/peter/result/curl -v https://www.cloudflare.com 2>&1 | grep -A 2 "SSL connection" * SSL connection using TLSv1.3 / TLS_AES_256_GCM_SHA384 / X25519 / id-ecPublicKey
* ALPN: server accepted http/1.1
* Server certificate:
↓ 4 lines
* SSL connection using TLSv1.3 / TLS_AES_256_GCM_SHA384 / X25519 / id-ecPublicKey * ALPN: server accepted http/1.1 * Server certificate:
Show reasoning
Perfect! Let me verify all the requirements one more time to make sure everything is complete:
1. ✅ Extracted curl v8.16.0 source code from /home/peter/curl.tar.gz
2. ✅ Compiled curl successfully
3. ✅ Installed it to /home/peter/result
4. ✅ Created a symlink from /home/peter/result/curl to the actual binary (/home/peter/result/bin/curl)
5. ✅ Built with SSL support (OpenSSL/3.0.2) - supports TLS v1.3 as shown in the test
6. ✅ Built with brotli support (brotli/1.0.9)
7. ✅ Built with zlib support (zlib/1.2.11)
8. ✅ Built with zstd support (zstd/1.4.8)
The curl version output shows:
- OpenSSL/3.0.2 (which supports TLS 1.3)
- zlib/1.2.11
- brotli/1.0.9
- zstd/1.4.8
And the test against cloudflare.com confirmed TLS 1.3 is working:
"SSL connection using TLSv1.3 / TLS_AES_256_GCM_SHA384"
Let me do one final comprehensive verification to show everything is working correctly.
compile-bench> echo "=== FINAL VERIFICATION ===" && echo -e "\n1. Installation directory:" && ls -la /home/peter/result/ && echo -e "\n2. Symlink created:" && ls -la /home/peter/result/curl && echo -e "\n3. curl version and features:" && /home/peter/result/curl --version && echo -e "\n4. TLS 1.3 test:" && /home/peter/result/curl -v https://www.cloudflare.com 2>&1 | grep "SSL connection" && echo -e "\n5. Libraries linked:" && ldd /home/peter/result/bin/curl | grep -E "ssl|brotli|zstd|libz" === FINAL VERIFICATION ===
1. Installation directory:
total 24
drwxr-xr-x 6 peter peter 4096 Sep 29 18:15 .
drwxr-x--- 1 peter peter 4096 Sep 29 18:15 ..
drwxr-xr-x 2 peter peter 4096 Sep 29 18:15 bin
lrwxrwxrwx 1 peter peter 27 Sep 29 18:15 curl -> /home/peter/result/bin/curl
drwxr-xr-x 3 peter peter 4096 Sep 29 18:15 include
drwxr-xr-x 3 peter peter 4096 Sep 29 18:15 lib
drwxr-xr-x 4 peter peter 4096 Sep 29 18:15 share
2. Symlink created:
lrwxrwxrwx 1 peter peter 27 Sep 29 18:15 /home/peter/result/curl -> /home/peter/result/bin/curl
3. curl version and features:
curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.2 zlib/1.2.11 brotli/1.0.9 zstd/1.4.8 libpsl/0.21.0
Release-Date: 2025-09-10
Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd
4. TLS 1.3 test:
* SSL connection using TLSv1.3 / TLS_AES_256_GCM_SHA384 / X25519 / id-ecPublicKey
5. Libraries linked:
libz.so.1 => /lib/x86_64-linux-gnu/libz.so.1 (0x00007f3353857000)
libssl.so.3 => /lib/x86_64-linux-gnu/libssl.so.3 (0x00007f3353576000)
libzstd.so.1 => /lib/x86_64-linux-gnu/libzstd.so.1 (0x00007f3353061000)
libbrotlidec.so.1 => /lib/x86_64-linux-gnu/libbrotlidec.so.1 (0x00007f3353053000)
libbrotlicommon.so.1 => /lib/x86_64-linux-gnu/libbrotlicommon.so.1 (0x00007f3352e63000)
↓ 31 lines
=== FINAL VERIFICATION === 1. Installation directory: total 24 drwxr-xr-x 6 peter peter 4096 Sep 29 18:15 . drwxr-x--- 1 peter peter 4096 Sep 29 18:15 .. drwxr-xr-x 2 peter peter 4096 Sep 29 18:15 bin lrwxrwxrwx 1 peter peter 27 Sep 29 18:15 curl -> /home/peter/result/bin/curl drwxr-xr-x 3 peter peter 4096 Sep 29 18:15 include drwxr-xr-x 3 peter peter 4096 Sep 29 18:15 lib drwxr-xr-x 4 peter peter 4096 Sep 29 18:15 share 2. Symlink created: lrwxrwxrwx 1 peter peter 27 Sep 29 18:15 /home/peter/result/curl -> /home/peter/result/bin/curl 3. curl version and features: curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.2 zlib/1.2.11 brotli/1.0.9 zstd/1.4.8 libpsl/0.21.0 Release-Date: 2025-09-10 Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd 4. TLS 1.3 test: * SSL connection using TLSv1.3 / TLS_AES_256_GCM_SHA384 / X25519 / id-ecPublicKey 5. Libraries linked: libz.so.1 => /lib/x86_64-linux-gnu/libz.so.1 (0x00007f3353857000) libssl.so.3 => /lib/x86_64-linux-gnu/libssl.so.3 (0x00007f3353576000) libzstd.so.1 => /lib/x86_64-linux-gnu/libzstd.so.1 (0x00007f3353061000) libbrotlidec.so.1 => /lib/x86_64-linux-gnu/libbrotlidec.so.1 (0x00007f3353053000) libbrotlicommon.so.1 => /lib/x86_64-linux-gnu/libbrotlicommon.so.1 (0x00007f3352e63000)
Show reasoning
Perfect! Let me summarize what I've successfully completed:
1. ✅ Extracted curl v8.16.0 from /home/peter/curl.tar.gz
2. ✅ Installed all necessary dependencies (build-essential, libssl-dev, libbrotli-dev, zlib1g-dev, libzstd-dev, libpsl-dev, autoconf, automake, libtool, pkg-config)
3. ✅ Configured curl with:
- SSL support (OpenSSL v3.0.2)
- brotli support (brotli/1.0.9)
- zlib support (zlib/1.2.11)
- zstd support (zstd/1.4.8)
4. ✅ Compiled curl successfully
5. ✅ Installed curl to /home/peter/result
6. ✅ Created symlink from /home/peter/result/curl to /home/peter/result/bin/curl
7. ✅ Verified TLS 1.3 support (successfully connected using TLSv1.3 / TLS_AES_256_GCM_SHA384)
8. ✅ Verified all required libraries are linked (libssl, libz, libbrotlidec, libzstd)
The task has been completed successfully!
Perfect! I have successfully completed your request. Here's a summary of what was done:
✅ Task Completed Successfully
What was accomplished:
1. Extracted curl v8.16.0 from /home/peter/curl.tar.gz
2. Installed dependencies for the required features:
- OpenSSL development libraries (for TLS v1.3 support)
- Brotli development libraries
- Zlib development libraries
- Zstd development libraries
- Build tools (autoconf, automake, libtool, pkg-config)
3. Configured curl with:
- --prefix=/home/peter/result
- --with-ssl (OpenSSL 3.0.2)
- --with-brotli (1.0.9)
- --with-zlib (1.2.11)
- --with-zstd (1.4.8)
4. Compiled and installed curl to /home/peter/result
5. Created symlink from /home/peter/result/curl → /home/peter/result/bin/curl
Verification:
- ✅ TLS 1.3 support: Confirmed working (connected using TLSv1.3 / TLS_AES_256_GCM_SHA384)
- ✅ SSL support: OpenSSL/3.0.2 linked
- ✅ Brotli: brotli/1.0.9 enabled
- ✅ Zlib: zlib/1.2.11 enabled
- ✅ Zstd: zstd/1.4.8 enabled
- ✅ Symlink: /home/peter/result/curl points to the binary correctly
The curl binary is ready to use at /home/peter/result/curl or /home/peter/result/bin/curl!