Summary
Performance
| Cost | $0.014 |
| Total elapsed time | 1m3s |
| LLM inference time | 20s |
| Command execution time | 43s |
| Commands executed | 2 |
All details >
| Attempt ID | wm3uscqd9ieeu | Attempt group | run-16-09-22-05 |
| Revision | fb5c74bd2fee | AWS Instance | m8i.2xlarge |
| Start time | 2025-09-16T21:46:02.163Z | End time | 2025-09-16T21:47:07.688Z |
| Task | curl-ssl | Environment | ubuntu-22.04-amd64 |
| Model |  gpt-5-minimal | OpenRouter slug | openai/gpt-5 |
| Temperature | 1 | Explicit prompt caching | false |
| User msg after tool call | false | Max tool calls | 70 |
| Total timeout seconds | 900 | Single command timeout | 600 |
| Cost | $0.014 | Duration | 1m3s |
| LLM inference time | 20s | Command execution time | 43s |
| Final context tokens | 4,073 | Total output tokens | 820 |
| Output reasoning tokens | 0 | Messages | 7 |
| Assistant messages | 3 | User messages | 1 |
| System messages | 1 | Commands executed | 2 |
Task
Task: curl-ssl
curl 8.16.0 is a command-line HTTP client.
Project link: curl.se
Task:
Compile and install curl to a specific location. Build with SSL support (TLS v1.3), brotli, zlib and zstd.
Difficulties:
Installing dependencies can be tricky.
Environment:
Ubuntu 22.04 on amd64, with internet access.
Execution log
SYSTEM
You are a package-building specialist operating a Ubuntu 22.04 bash shell via one tool: run_terminal_cmd.
The current working directory of every run_terminal_cmd is /home/peter.
Execution rules:
- Always pass non-interactive flags for any command that could prompt (e.g., -y, --yes, DEBIAN_FRONTEND=noninteractive).
- Don't include any newlines in the command.
- You can use sudo.
If you encounter any errors or issues while doing the user's request, you must fix them and continue the task.
At the end verify you did the user request correctly.
USER
You are given a curl v8.16.0 source code at /home/peter/curl.tar.gz. Please compile curl and install it to /home/peter/result. Create a symlink from /home/peter/result/curl to the actual binary. Make sure it builds with SSL support (TLS v1.3), brotli, zlib and zstd.
ASSISTANT
compile-bench> set -e; export DEBIAN_FRONTEND=noninteractive; sudo apt-get update -y; sudo apt-get install -y build-essential pkg-config autoconf automake libtool cmake ninja-build meson perl python3 libssl-dev zlib1g-dev libbrotli-dev libzstd-dev ca-certificates; rm -rf /home/peter/build; mkdir -p /home/peter/build /home/peter/result/bin; cd /home/peter/build; tar xf /home/peter/curl.tar.gz; cd curl-*; if [ -f configure ]; then echo using autotools; else echo generating configure; autoreconf -fi; fi; ./configure --prefix=/home/peter/result --with-ssl --with-zlib --with-brotli --with-zstd --enable-tls-srp --enable-alt-svc; make -j"$(nproc)"; make install; ln -sf /home/peter/result/bin/curl /home/peter/result/curl; /home/peter/result/bin/curl -V
0% [Working]
Hit:1 http://archive.ubuntu.com/ubuntu jammy InRelease
0% [Waiting for headers] [Connecting to security.ubuntu.com (185.125.190.83)]
Get:2 http://archive.ubuntu.com/ubuntu jammy-updates InRelease [128 kB]
0% [2 InRelease 5484 B/128 kB 4%] [Connecting to security.ubuntu.com (185.125.1
0% [2 InRelease 38.8 kB/128 kB 30%] [Waiting for headers]
0% [Waiting for headers]
Get:3 http://archive.ubuntu.com/ubuntu jammy-backports InRelease [127 kB]
0% [3 InRelease 6932 B/127 kB 5%] [Waiting for headers]
0% [Waiting for headers]
0% [Waiting for headers]
Get:4 http://security.ubuntu.com/ubuntu jammy-security InRelease [129 kB]
0% [Waiting for headers] [4 InRelease 5484 B/129 kB 4%]
Get:5 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 Packages [3624 kB]
0% [5 Packages 6999 B/3624 kB 0%] [4 InRelease 14.2 kB/129 kB 11%]
0% [5 Packages 231 kB/3624 kB 6%] [4 InRelease 14.2 kB/129 kB 11%]
0% [4 InRelease 41.7 kB/129 kB 32%]
0% [5 Packages store 0 B] [Waiting for headers] [4 InRelease 41.7 kB/129 kB 32%
Get:6 http://archive.ubuntu.com/ubuntu jammy-updates/universe amd64 Packages [1581 kB]
0% [5 Packages store 0 B] [6 Packages 49.0 kB/1581 kB 3%] [4 InRelease 43.1 kB/
0% [5 Packages store 0 B] [4 InRelease 46.0 kB/129 kB 36%]
0% [4 InRelease 82.2 kB/129 kB 64%]
0% [6 Packages store 0 B] [4 InRelease 82.2 kB/129 kB 64%]
0% [4 InRelease 117 kB/129 kB 91%]
0% [Working]
46% [Working]
Get:7 http://security.ubuntu.com/ubuntu jammy-security/restricted amd64 Packages [5441 kB]
46% [7 Packages 2655 B/5441 kB 0%]
71% [7 Packages 4820 kB/5441 kB 89%]
74% [Working]
74% [7 Packages store 0 B] [Waiting for headers]
Get:8 http://security.ubuntu.com/ubuntu jammy-security/main amd64 Packages [3311 kB]
74% [7 Packages store 0 B] [8 Packages 49.0 kB/3311 kB 1%]
91% [7 Packages store 0 B] [Waiting for headers]
Get:9 http://security.ubuntu.com/ubuntu jammy-security/universe amd64 Packages [1274 kB]
91% [7 Packages store 0 B] [9 Packages 8192 B/1274 kB 1%]
[command output truncated]
ibrary is required... no
checking for gethostbyname... yes
checking whether build target is a native Windows one... (cached) no
checking for proto/bsdsocket.h... no
checking for connect in libraries... yes
checking for sys/types.h... (cached) yes
checking for monotonic clock_gettime... yes
checking for clock_gettime in libraries... no additional lib required
checking if monotonic clock_gettime works... yes
checking for sys/types.h... (cached) yes
checking for raw monotonic clock_gettime... yes
checking for pkg-config... /usr/bin/pkg-config
checking for zlib options with pkg-config... found
checking for zlib.h... yes
configure: found both libz and libz.h header
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libbrotlidec options with pkg-config... found
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libbrotlicommon options with pkg-config... found
checking for BrotliDecoderDecompress in -lbrotlidec... yes
checking for brotli/decode.h... yes
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libzstd options with pkg-config... found
checking for ZSTD_createDStream in -lzstd... yes
checking for zstd.h... yes
checking whether to enable IPv6... yes
checking if struct sockaddr_in6 has sin6_scope_id member... yes
checking if argv can be written to... yes
checking if GSS-API support is requested... no
checking whether to enable Windows native SSL/TLS... no
checking whether to enable Amiga native SSL/TLS (AmiSSL v5)... no
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for openssl options with pkg-config... found
configure: pkg-config: SSL_LIBS: "-lssl -lcrypto"
configure: pkg-config: SSL_LDFLAGS: ""
configure: pkg-config: SSL_CPPFLAGS: ""
checking for HMAC_Update in -lcrypto... yes
checking for SSL_connect in -lssl... yes
checking for openssl/x509.h... yes
checking for openssl/rsa.h... yes
checking for openssl/crypto.h... yes
checking for openssl/pem.h... yes
checking for openssl/ssl.h... yes
checking for openssl/err.h... yes
checking for BoringSSL... no
checking for AWS-LC... no
checking for LibreSSL... no
checking for OpenSSL >= v3... yes
checking for SSL_set_quic_use_legacy_codepoint... no
checking for SSL_set_quic_tls_cbs... no
configure: OpenSSL version does not speak any known QUIC API
checking for SRP support in OpenSSL... yes
checking for QUIC support and OpenSSL >= 3.3... no
configure: built with one SSL backend
checking default CA cert bundle/path... configure: want unset ca /etc/ssl/certs/ca-certificates.crt
/etc/ssl/certs/ca-certificates.crt
/etc/ssl/certs (capath)
checking whether to use OpenSSL's built-in CA store... no
checking CA cert bundle path to embed in the curl tool... no
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libpsl options with pkg-config... no
checking for psl_builtin in -lpsl... no
configure: error: libpsl libs and/or directories were not found where specified!
↓ 75 lines
compile-bench> set -e; export DEBIAN_FRONTEND=noninteractive; sudo apt-get update -y; sudo apt-get install -y build-essential pkg-config autoconf automake libtool cmake ninja-build meson perl python3 libssl-dev zlib1g-dev libbrotli-dev libzstd-dev ca-certificates; rm -rf /home/peter/build; mkdir -p /home/peter/build /home/peter/result/bin; cd /home/peter/build; tar xf /home/peter/curl.tar.gz; cd curl-*; if [ -f configure ]; then echo using autotools; else echo generating configure; autoreconf -fi; fi; ./configure --prefix=/home/peter/result --with-ssl --with-zlib --with-brotli --with-zstd --enable-tls-srp --enable-alt-svc; make -j"$(nproc)"; make install; ln -sf /home/peter/result/bin/curl /home/peter/result/curl; /home/peter/result/bin/curl -V
0% [Working]
Hit:1 http://archive.ubuntu.com/ubuntu jammy InRelease
0% [Waiting for headers] [Connecting to security.ubuntu.com (185.125.190.83)]
Get:2 http://archive.ubuntu.com/ubuntu jammy-updates InRelease [128 kB]
0% [2 InRelease 5484 B/128 kB 4%] [Connecting to security.ubuntu.com (185.125.1
0% [2 InRelease 38.8 kB/128 kB 30%] [Waiting for headers]
0% [Waiting for headers]
Get:3 http://archive.ubuntu.com/ubuntu jammy-backports InRelease [127 kB]
0% [3 InRelease 6932 B/127 kB 5%] [Waiting for headers]
0% [Waiting for headers]
0% [Waiting for headers]
Get:4 http://security.ubuntu.com/ubuntu jammy-security InRelease [129 kB]
0% [Waiting for headers] [4 InRelease 5484 B/129 kB 4%]
Get:5 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 Packages [3624 kB]
0% [5 Packages 6999 B/3624 kB 0%] [4 InRelease 14.2 kB/129 kB 11%]
0% [5 Packages 231 kB/3624 kB 6%] [4 InRelease 14.2 kB/129 kB 11%]
0% [4 InRelease 41.7 kB/129 kB 32%]
0% [5 Packages store 0 B] [Waiting for headers] [4 InRelease 41.7 kB/129 kB 32%
Get:6 http://archive.ubuntu.com/ubuntu jammy-updates/universe amd64 Packages [1581 kB]
0% [5 Packages store 0 B] [6 Packages 49.0 kB/1581 kB 3%] [4 InRelease 43.1 kB/
0% [5 Packages store 0 B] [4 InRelease 46.0 kB/129 kB 36%]
0% [4 InRelease 82.2 kB/129 kB 64%]
0% [6 Packages store 0 B] [4 InRelease 82.2 kB/129 kB 64%]
0% [4 InRelease 117 kB/129 kB 91%]
0% [Working]
46% [Working]
Get:7 http://security.ubuntu.com/ubuntu jammy-security/restricted amd64 Packages [5441 kB]
46% [7 Packages 2655 B/5441 kB 0%]
71% [7 Packages 4820 kB/5441 kB 89%]
74% [Working]
74% [7 Packages store 0 B] [Waiting for headers]
Get:8 http://security.ubuntu.com/ubuntu jammy-security/main amd64 Packages [3311 kB]
74% [7 Packages store 0 B] [8 Packages 49.0 kB/3311 kB 1%]
91% [7 Packages store 0 B] [Waiting for headers]
Get:9 http://security.ubuntu.com/ubuntu jammy-security/universe amd64 Packages [1274 kB]
91% [7 Packages store 0 B] [9 Packages 8192 B/1274 kB 1%]
[command output truncated]
ibrary is required... no
checking for gethostbyname... yes
checking whether build target is a native Windows one... (cached) no
checking for proto/bsdsocket.h... no
checking for connect in libraries... yes
checking for sys/types.h... (cached) yes
checking for monotonic clock_gettime... yes
checking for clock_gettime in libraries... no additional lib required
checking if monotonic clock_gettime works... yes
checking for sys/types.h... (cached) yes
checking for raw monotonic clock_gettime... yes
checking for pkg-config... /usr/bin/pkg-config
checking for zlib options with pkg-config... found
checking for zlib.h... yes
configure: found both libz and libz.h header
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libbrotlidec options with pkg-config... found
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libbrotlicommon options with pkg-config... found
checking for BrotliDecoderDecompress in -lbrotlidec... yes
checking for brotli/decode.h... yes
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libzstd options with pkg-config... found
checking for ZSTD_createDStream in -lzstd... yes
checking for zstd.h... yes
checking whether to enable IPv6... yes
checking if struct sockaddr_in6 has sin6_scope_id member... yes
checking if argv can be written to... yes
checking if GSS-API support is requested... no
checking whether to enable Windows native SSL/TLS... no
checking whether to enable Amiga native SSL/TLS (AmiSSL v5)... no
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for openssl options with pkg-config... found
configure: pkg-config: SSL_LIBS: "-lssl -lcrypto"
configure: pkg-config: SSL_LDFLAGS: ""
configure: pkg-config: SSL_CPPFLAGS: ""
checking for HMAC_Update in -lcrypto... yes
checking for SSL_connect in -lssl... yes
checking for openssl/x509.h... yes
checking for openssl/rsa.h... yes
checking for openssl/crypto.h... yes
checking for openssl/pem.h... yes
checking for openssl/ssl.h... yes
checking for openssl/err.h... yes
checking for BoringSSL... no
checking for AWS-LC... no
checking for LibreSSL... no
checking for OpenSSL >= v3... yes
checking for SSL_set_quic_use_legacy_codepoint... no
checking for SSL_set_quic_tls_cbs... no
configure: OpenSSL version does not speak any known QUIC API
checking for SRP support in OpenSSL... yes
checking for QUIC support and OpenSSL >= 3.3... no
configure: built with one SSL backend
checking default CA cert bundle/path... configure: want unset ca /etc/ssl/certs/ca-certificates.crt
/etc/ssl/certs/ca-certificates.crt
/etc/ssl/certs (capath)
checking whether to use OpenSSL's built-in CA store... no
checking CA cert bundle path to embed in the curl tool... no
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libpsl options with pkg-config... no
checking for psl_builtin in -lpsl... no
configure: error: libpsl libs and/or directories were not found where specified!
ASSISTANT
compile-bench> set -e; export DEBIAN_FRONTEND=noninteractive; sudo apt-get install -y libpsl-dev; cd /home/peter/build/curl-*; make distclean || true; ./configure --prefix=/home/peter/result --with-ssl --with-zlib --with-brotli --with-zstd --enable-tls-srp --enable-alt-svc; make -j"$(nproc)"; make install; ln -sf /home/peter/result/bin/curl /home/peter/result/curl; /home/peter/result/bin/curl -V
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 3%
Reading package lists... 3%
Reading package lists... 4%
Reading package lists... 4%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 52%
Reading package lists... 52%
Reading package lists... 67%
Reading package lists... 67%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 81%
Reading package lists... 81%
Reading package lists... 96%
Reading package lists... 96%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... Done
Building dependency tree... 0%
Building dependency tree... 0%
Building dependency tree... 50%
Building dependency tree... 50%
Building dependency tree... 95%
Building dependency tree... Done
Reading state information... 0%
Reading state information... 1%
Reading state information... Done
The following NEW packages will be installed:
libpsl-dev
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 77.9 kB of archives.
After this operation, 214 kB of additional disk space will be used.
0% [Working]
Get:1 http://archive.ubuntu.com/ubuntu jammy/main amd64 libpsl-dev amd64 0.21.0-1.2build2 [77.9 kB]
15% [1 libpsl-dev 14.2 kB/77.9 kB 18%]
100% [Working]
Fetched 77.9 kB in 0s (732 kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package libpsl-dev:amd64.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 16096 files and directories currently installed.)
Preparing to unpack .../libpsl-dev_0.21.0-1.2build2_amd64.deb ...
Unpacking libpsl-dev:amd64 (0.21.0-1.2build2) ...
Setting up libpsl-dev:amd64 (0.21.0-1.2build2) ...
make: *** No rule to make target 'distclean'. Stop.
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether t
[command output truncated]
e/aclocal'
/usr/bin/mkdir -p '/home/peter/result/share/man/man3'
/usr/bin/install -c -m 644 curl_easy_cleanup.3 curl_easy_duphandle.3 curl_easy_escape.3 curl_easy_getinfo.3 curl_easy_header.3 curl_easy_init.3 curl_easy_nextheader.3 curl_easy_option_by_id.3 curl_easy_option_by_name.3 curl_easy_option_next.3 curl_easy_pause.3 curl_easy_perform.3 curl_easy_recv.3 curl_easy_reset.3 curl_easy_send.3 curl_easy_setopt.3 curl_easy_ssls_export.3 curl_easy_ssls_import.3 curl_easy_strerror.3 curl_easy_unescape.3 curl_easy_upkeep.3 curl_escape.3 curl_formadd.3 curl_formfree.3 curl_formget.3 curl_free.3 curl_getdate.3 curl_getenv.3 curl_global_cleanup.3 curl_global_init.3 curl_global_init_mem.3 curl_global_sslset.3 curl_global_trace.3 curl_mime_addpart.3 curl_mime_data.3 curl_mime_data_cb.3 curl_mime_encoder.3 curl_mime_filedata.3 curl_mime_filename.3 curl_mime_free.3 '/home/peter/result/share/man/man3'
/usr/bin/install -c -m 644 curl_mime_headers.3 curl_mime_init.3 curl_mime_name.3 curl_mime_subparts.3 curl_mime_type.3 curl_mprintf.3 curl_multi_add_handle.3 curl_multi_assign.3 curl_multi_cleanup.3 curl_multi_fdset.3 curl_multi_get_handles.3 curl_multi_get_offt.3 curl_multi_info_read.3 curl_multi_init.3 curl_multi_perform.3 curl_multi_poll.3 curl_multi_remove_handle.3 curl_multi_setopt.3 curl_multi_socket.3 curl_multi_socket_action.3 curl_multi_socket_all.3 curl_multi_strerror.3 curl_multi_timeout.3 curl_multi_wait.3 curl_multi_waitfds.3 curl_multi_wakeup.3 curl_pushheader_byname.3 curl_pushheader_bynum.3 curl_share_cleanup.3 curl_share_init.3 curl_share_setopt.3 curl_share_strerror.3 curl_slist_append.3 curl_slist_free_all.3 curl_strequal.3 curl_strnequal.3 curl_unescape.3 curl_url.3 curl_url_cleanup.3 curl_url_dup.3 '/home/peter/result/share/man/man3'
/usr/bin/install -c -m 644 curl_url_get.3 curl_url_set.3 curl_url_strerror.3 curl_version.3 curl_version_info.3 curl_ws_meta.3 curl_ws_recv.3 curl_ws_send.3 curl_ws_start_frame.3 libcurl-easy.3 libcurl-env-dbg.3 libcurl-env.3 libcurl-errors.3 libcurl-multi.3 libcurl-security.3 libcurl-share.3 libcurl-symbols.3 libcurl-thread.3 libcurl-tutorial.3 libcurl-url.3 libcurl-ws.3 libcurl.3 '/home/peter/result/share/man/man3'
make[6]: Leaving directory '/home/peter/build/curl-8.16.0/docs/libcurl'
make[5]: Leaving directory '/home/peter/build/curl-8.16.0/docs/libcurl'
make[4]: Leaving directory '/home/peter/build/curl-8.16.0/docs/libcurl'
make[3]: Leaving directory '/home/peter/build/curl-8.16.0'
make[2]: Leaving directory '/home/peter/build/curl-8.16.0'
make[1]: Leaving directory '/home/peter/build/curl-8.16.0'
curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.2 zlib/1.2.11 brotli/1.0.9 zstd/1.4.8 libpsl/0.21.0
Release-Date: 2025-09-10
Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd
↓ 39 lines
compile-bench> set -e; export DEBIAN_FRONTEND=noninteractive; sudo apt-get install -y libpsl-dev; cd /home/peter/build/curl-*; make distclean || true; ./configure --prefix=/home/peter/result --with-ssl --with-zlib --with-brotli --with-zstd --enable-tls-srp --enable-alt-svc; make -j"$(nproc)"; make install; ln -sf /home/peter/result/bin/curl /home/peter/result/curl; /home/peter/result/bin/curl -V
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 3%
Reading package lists... 3%
Reading package lists... 4%
Reading package lists... 4%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 52%
Reading package lists... 52%
Reading package lists... 67%
Reading package lists... 67%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 81%
Reading package lists... 81%
Reading package lists... 96%
Reading package lists... 96%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... Done
Building dependency tree... 0%
Building dependency tree... 0%
Building dependency tree... 50%
Building dependency tree... 50%
Building dependency tree... 95%
Building dependency tree... Done
Reading state information... 0%
Reading state information... 1%
Reading state information... Done
The following NEW packages will be installed:
libpsl-dev
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 77.9 kB of archives.
After this operation, 214 kB of additional disk space will be used.
0% [Working]
Get:1 http://archive.ubuntu.com/ubuntu jammy/main amd64 libpsl-dev amd64 0.21.0-1.2build2 [77.9 kB]
15% [1 libpsl-dev 14.2 kB/77.9 kB 18%]
100% [Working]
Fetched 77.9 kB in 0s (732 kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package libpsl-dev:amd64.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 16096 files and directories currently installed.)
Preparing to unpack .../libpsl-dev_0.21.0-1.2build2_amd64.deb ...
Unpacking libpsl-dev:amd64 (0.21.0-1.2build2) ...
Setting up libpsl-dev:amd64 (0.21.0-1.2build2) ...
make: *** No rule to make target 'distclean'. Stop.
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether t
[command output truncated]
e/aclocal'
/usr/bin/mkdir -p '/home/peter/result/share/man/man3'
/usr/bin/install -c -m 644 curl_easy_cleanup.3 curl_easy_duphandle.3 curl_easy_escape.3 curl_easy_getinfo.3 curl_easy_header.3 curl_easy_init.3 curl_easy_nextheader.3 curl_easy_option_by_id.3 curl_easy_option_by_name.3 curl_easy_option_next.3 curl_easy_pause.3 curl_easy_perform.3 curl_easy_recv.3 curl_easy_reset.3 curl_easy_send.3 curl_easy_setopt.3 curl_easy_ssls_export.3 curl_easy_ssls_import.3 curl_easy_strerror.3 curl_easy_unescape.3 curl_easy_upkeep.3 curl_escape.3 curl_formadd.3 curl_formfree.3 curl_formget.3 curl_free.3 curl_getdate.3 curl_getenv.3 curl_global_cleanup.3 curl_global_init.3 curl_global_init_mem.3 curl_global_sslset.3 curl_global_trace.3 curl_mime_addpart.3 curl_mime_data.3 curl_mime_data_cb.3 curl_mime_encoder.3 curl_mime_filedata.3 curl_mime_filename.3 curl_mime_free.3 '/home/peter/result/share/man/man3'
/usr/bin/install -c -m 644 curl_mime_headers.3 curl_mime_init.3 curl_mime_name.3 curl_mime_subparts.3 curl_mime_type.3 curl_mprintf.3 curl_multi_add_handle.3 curl_multi_assign.3 curl_multi_cleanup.3 curl_multi_fdset.3 curl_multi_get_handles.3 curl_multi_get_offt.3 curl_multi_info_read.3 curl_multi_init.3 curl_multi_perform.3 curl_multi_poll.3 curl_multi_remove_handle.3 curl_multi_setopt.3 curl_multi_socket.3 curl_multi_socket_action.3 curl_multi_socket_all.3 curl_multi_strerror.3 curl_multi_timeout.3 curl_multi_wait.3 curl_multi_waitfds.3 curl_multi_wakeup.3 curl_pushheader_byname.3 curl_pushheader_bynum.3 curl_share_cleanup.3 curl_share_init.3 curl_share_setopt.3 curl_share_strerror.3 curl_slist_append.3 curl_slist_free_all.3 curl_strequal.3 curl_strnequal.3 curl_unescape.3 curl_url.3 curl_url_cleanup.3 curl_url_dup.3 '/home/peter/result/share/man/man3'
/usr/bin/install -c -m 644 curl_url_get.3 curl_url_set.3 curl_url_strerror.3 curl_version.3 curl_version_info.3 curl_ws_meta.3 curl_ws_recv.3 curl_ws_send.3 curl_ws_start_frame.3 libcurl-easy.3 libcurl-env-dbg.3 libcurl-env.3 libcurl-errors.3 libcurl-multi.3 libcurl-security.3 libcurl-share.3 libcurl-symbols.3 libcurl-thread.3 libcurl-tutorial.3 libcurl-url.3 libcurl-ws.3 libcurl.3 '/home/peter/result/share/man/man3'
make[6]: Leaving directory '/home/peter/build/curl-8.16.0/docs/libcurl'
make[5]: Leaving directory '/home/peter/build/curl-8.16.0/docs/libcurl'
make[4]: Leaving directory '/home/peter/build/curl-8.16.0/docs/libcurl'
make[3]: Leaving directory '/home/peter/build/curl-8.16.0'
make[2]: Leaving directory '/home/peter/build/curl-8.16.0'
make[1]: Leaving directory '/home/peter/build/curl-8.16.0'
curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.2 zlib/1.2.11 brotli/1.0.9 zstd/1.4.8 libpsl/0.21.0
Release-Date: 2025-09-10
Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd
ASSISTANT
I compiled curl 8.16.0 from /home/peter/curl.tar.gz with the requested features and installed it to /home/peter/result, including a symlink /home/peter/result/curl pointing to the actual binary.
What I did:
- Installed required build dependencies (non-interactively): build-essential, pkg-config, autoconf, automake, libtool, libssl-dev, zlib1g-dev, libbrotli-dev, libzstd-dev, libpsl-dev, and supporting tools.
- Extracted the tarball to /home/peter/build, generated configure (autoreconf) if needed.
- Configured curl with:
--prefix=/home/peter/result --with-ssl --with-zlib --with-brotli --with-zstd --enable-tls-srp --enable-alt-svc
- Built and installed.
- Created the symlink: /home/peter/result/curl -> /home/peter/result/bin/curl
- Verified the build.
Verification:
- /home/peter/result/bin/curl -V output:
curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.2 zlib/1.2.11 brotli/1.0.9 zstd/1.4.8 libpsl/0.21.0
Features: ... brotli ... libz ... zstd ... SSL ... TLS-SRP ...
Protocols include https, wss, etc.
- SSL backend: OpenSSL 3.0.2 (supports TLS v1.3).
- Brotli, zlib, and zstd are listed in Features and linked libraries.
- Symlink exists: /home/peter/result/curl -> /home/peter/result/bin/curl
You can use it via:
/home/peter/result/curl --version
/home/peter/result/bin/curl --version
If you need HTTP/3/QUIC support, I can add ngtcp2/nghttp3 and rebuild, but it wasn’t requested.
Task finished successfully, all checks passed!
Checks passed:
curl binary exists
curl version matches expected
curl downloaded the expected local file content
curl HTTPS request to google.com returned content-type: text/html
curl TLSv1.2 connection to google.com used TLSv1.2
curl TLSv1.3 connection to google.com used TLSv1.3
curl brotli compression test passed
curl gzip compression test passed
curl version shows zstd support