<- Ranking
Summary
Task
curl-ssl-arm64-static2
Model
claude-sonnet-4.5 logo
claude-sonnet-4.5
Status
Success
Performance
Cost$0.976
Total elapsed time6m1s
LLM inference time3m5s
Command execution time2m56s
Commands executed52
All details >
Attempt ID uke7xjdn2uqfg Attempt group run-29-09-25-19-32
Revision 0cfc533b3f68 AWS Instance m8i.2xlarge
Start time 2025-09-29T18:18:21.237Z End time 2025-09-29T18:24:26.563Z
Task curl-ssl-arm64-static2 Environment ubuntu-22.04-amd64-cross-arm64
Model claude-sonnet-4.5 logo claude-sonnet-4.5 OpenRouter slug anthropic/claude-sonnet-4.5
Temperature 1 Explicit prompt caching true
User msg after tool call false Max tool calls 150
Total timeout seconds 3600 Single command timeout 1800
Cost $0.976 Duration 6m1s
LLM inference time 3m5s Command execution time 2m56s
Final context tokens 63,515 Total output tokens 7,943
Output reasoning tokens 0 Messages 107
Assistant messages 53 User messages 1
System messages 1 Commands executed 52
Download full attempt result JSON
Task
Task: curl-ssl-arm64-static2

curl 8.16.0 is a command-line HTTP client.
Project link: curl.se

Task:
Compile and install curl to a specific location. Build with SSL support (TLS v1.3), brotli, zlib and zstd. Cross-compile to arm64. Link it statically. This is a variant of curl-ssl-arm64-static, with a hint to do a trial run of compiled binary.

Difficulties:
Cross-compilation toolchain setup, manually cross-compiling all dependencies, properly configuring SSL certificates in OpenSSL.

Environment:
Ubuntu 22.04 on amd64, with internet access.

View task page
Execution log
SYSTEM

You are a package-building specialist operating a Ubuntu 22.04 bash shell via one tool: run_terminal_cmd.
The current working directory of every run_terminal_cmd is /home/peter.
Execution rules:
- Always pass non-interactive flags for any command that could prompt (e.g., -y, --yes, DEBIAN_FRONTEND=noninteractive).
- Don't include any newlines in the command.
- You can use sudo.
If you encounter any errors or issues while doing the user's request, you must fix them and continue the task.
At the end verify you did the user request correctly.

USER

You are given a curl v8.16.0 source code at /home/peter/curl.tar.gz. Please compile curl and install it to /home/peter/result. Create a symlink from /home/peter/result/curl to the actual binary. Make sure it builds with SSL support (TLS v1.3), brotli, zlib and zstd. The binary should be statically compiled for arm64. Do a trial run via qemu-aarch64-static, making sure this EXACT command works correctly: curl https://google.com

ASSISTANT

I'll help you compile curl v8.16.0 with the specified requirements. Let me break this down into steps:

1. Extract the source code
2. Install necessary dependencies and cross-compilation tools
3. Configure curl with SSL, brotli, zlib, and zstd support
4. Build statically for arm64
5. Install to /home/peter/result
6. Create symlink
7. Test with qemu

Let's start:

compile-bench> cd /home/peter && tar -xzf curl.tar.gz && ls -la
total 4108
drwxr-x---  1 peter peter    4096 Sep 29 18:18 .
drwxr-xr-x  1 root  root     4096 Sep 15 11:21 ..
-rw-r--r--  1 peter peter     220 Jan  6  2022 .bash_logout
-rw-r--r--  1 peter peter    3771 Jan  6  2022 .bashrc
-rw-r--r--  1 peter peter     807 Jan  6  2022 .profile
drwxr-xr-x 14 peter peter    4096 Sep 10 05:43 curl-8.16.0
-rw-r--r--  1 peter peter 4176617 Sep 29 18:18 curl.tar.gz
↓ 9 lines
ASSISTANT
compile-bench> sudo apt-get update -y
0% [Working]
            
Hit:1 http://archive.ubuntu.com/ubuntu jammy InRelease

0% [Waiting for headers] [Connecting to security.ubuntu.com (185.125.190.83)]
                                                                             
Get:2 http://archive.ubuntu.com/ubuntu jammy-updates InRelease [128 kB]

0% [2 InRelease 5484 B/128 kB 4%] [Connecting to security.ubuntu.com (185.125.1
                                                                               
0% [2 InRelease 35.9 kB/128 kB 28%] [Waiting for headers]
                                                         
0% [Waiting for headers]
                        
Get:3 http://archive.ubuntu.com/ubuntu jammy-backports InRelease [127 kB]

0% [3 InRelease 5484 B/127 kB 4%] [Waiting for headers]
                                                       
Get:4 http://security.ubuntu.com/ubuntu jammy-security InRelease [129 kB]

0% [3 InRelease 98.2 kB/127 kB 77%] [4 InRelease 12.7 kB/129 kB 10%]
                                                                    
0% [4 InRelease 14.2 kB/129 kB 11%]
0% [4 InRelease 14.2 kB/129 kB 11%]
                                   
Get:5 http://archive.ubuntu.com/ubuntu jammy-updates/universe amd64 Packages [1577 kB]

0% [5 Packages 6999 B/1577 kB 0%] [4 InRelease 14.2 kB/129 kB 11%]
0% [5 Packages 188 kB/1577 kB 12%] [4 InRelease 14.2 kB/129 kB 11%]
                                                                   
0% [4 InRelease 28.7 kB/129 kB 22%]
0% [5 Packages store 0 B] [Waiting for headers] [4 InRelease 28.7 kB/129 kB 22%
                                                                               
Get:6 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 Packages [3690 kB]

0% [5 Packages store 0 B] [6 Packages 15.7 kB/3690 kB 0%] [4 InRelease 41.7 kB/
                                                                               
0% [6 Packages 1662 kB/3690 kB 45%] [4 InRelease 43.1 kB/129 kB 33%]
                                                                    
0% [Waiting for headers] [4 InRelease 48.9 kB/129 kB 38%]
                                                         
Get:7 http://archive.ubuntu.com/ubuntu jammy-updates/restricted amd64 Packages [5804 kB]

0% [7 Packages 39.6 kB/5804 kB 1%] [4 InRelease 48.9 kB/129 kB 38%]
0% [6 Packages store 0 B] [7 Packages 46.7 kB/5804 kB 1%] [4 InRelease 48.9 kB/
0% [6 Packages store 0 B] [Waiting for headers] [4 InRelease 63.4 kB/129 kB 49%
                                                                               
Get:8 http://archive.ubuntu.com/ubuntu jammy-updates/multiverse amd64 Packages [69.1 kB]

0% [6 Packages store 0 B] [8 Packages 9849 B/69.1 kB 14%] [4 InRelease 63.4 kB/
0% [6 Packages store 0 B] [Waiting for headers] [4 InRelease 63.4 kB/129 kB 49%
                                                                               
Get:9 http://archive.ubuntu.com/ubuntu jammy-backports/universe amd64 Packages [35.2 kB]

0% [6 Packages store 0 B] [9 Packages 35.2
[command output truncated]
        
0% [7 Packages store 0 B]
58% [7 Packages store 0 B]
                          
Get:10 http://security.ubuntu.com/ubuntu jammy-security/main amd64 Packages [3371 kB]

58% [7 Packages store 0 B] [10 Packages 2655 B/3371 kB 0%]
                                                          
59% [10 Packages 15.7 kB/3371 kB 0%]
59% [8 Packages store 0 B] [10 Packages 15.7 kB/3371 kB 0%]
                                                           
60% [10 Packages 21.5 kB/3371 kB 1%]
60% [9 Packages store 0 B] [10 Packages 21.5 kB/3371 kB 1%]
                                                           
60% [10 Packages 24.4 kB/3371 kB 1%]
                                    
72% [Working]
72% [10 Packages store 0 B] [Waiting for headers]
                                                 
Get:11 http://security.ubuntu.com/ubuntu jammy-security/universe amd64 Packages [1274 kB]

73% [10 Packages store 0 B] [11 Packages 49.0 kB/1274 kB 4%]
                                                            
74% [11 Packages 197 kB/1274 kB 15%]
                                    
78% [Waiting for headers]
                         
Get:12 http://security.ubuntu.com/ubuntu jammy-security/multiverse amd64 Packages [71.0 kB]

78% [11 Packages store 0 B] [12 Packages 11.3 kB/71.0 kB 16%]
                                                             
78% [11 Packages store 0 B] [Waiting for headers]
                                                 
Get:13 http://security.ubuntu.com/ubuntu jammy-security/restricted amd64 Packages [5609 kB]

78% [11 Packages store 0 B] [13 Packages 24.6 kB/5609 kB 0%]
                                                            
86% [13 Packages 1959 kB/5609 kB 35%]
86% [12 Packages store 0 B] [13 Packages 1959 kB/5609 kB 35%]
                                                             
86% [13 Packages 2057 kB/5609 kB 37%]
                                     
99% [Working]
99% [13 Packages store 0 B]
                           
100% [Working]
              
Fetched 21.9 MB in 2s (13.9 MB/s)

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 3%

Reading package lists... 3%

Reading package lists... 4%

Reading package lists... 4%

Reading package lists... 41%

Reading package lists... 41%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 51%

Reading package lists... 51%

Reading package lists... 67%

Reading package lists... 67%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 80%

Reading package lists... 80%

Reading package lists... 96%

Reading package lists... 96%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... Done
↓ 18 lines
ASSISTANT
compile-bench> sudo DEBIAN_FRONTEND=noninteractive apt-get install -y build-essential gcc-aarch64-linux-gnu g++-aarch64-linux-gnu qemu-user-static autoconf automake libtool pkg-config
Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 3%

Reading package lists... 3%

Reading package lists... 4%

Reading package lists... 4%

Reading package lists... 41%

Reading package lists... 41%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 51%

Reading package lists... 51%

Reading package lists... 67%

Reading package lists... 67%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 80%

Reading package lists... 80%

Reading package lists... 96%

Reading package lists... 96%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... Done


Building dependency tree... 0%

Building dependency tree... 0%

Building dependency tree... 50%

Building dependency tree... 50%

Building dependency tree... 77%

Building dependency tree... Done


Reading state information... 0% 

Reading state information... 1%

Reading state information... Done

build-essential is already the newest version (12.9ubuntu3).
qemu-user-static is already the newest version (1:6.2+dfsg-2ubuntu6.27).
The following additional packages will be installed:
  autotools-dev binutils-aarch64-linux-gnu cpp-11-aarch64-linux-gnu
  cpp-aarch64-linux-gnu g++-11-aarch64-linux-gnu gcc-11-aarch64-linux-gnu
  gcc-11-aarch64-linux-gnu-base gcc-11-cross-base gcc-12-cross-base
  libasan6-arm64-cross libatomic1-arm64-cross libc6-arm64-cross
  libc6-dev-arm64-cross libgcc-11-dev-arm64-cross libgcc-s1-arm64-cross
  libglib2.0-0 libglib2.0-data libgomp1-arm64-cross libhwasan0-arm64-cross
  libicu70 libitm1-arm64-cross liblsan0-arm64-cross libltdl-dev libltdl7
  libsigsegv2 libstdc++-11-dev-arm64-cross libstdc++6-arm64-cross
  libtsan0-arm64-cross libubsan1-arm64-cross libxml2
  linux-libc-dev-arm64-cross m4 shared-mime-info xdg-user-dirs
Suggested packages:
  autoconf-archive gnu-standards autoconf-doc gettext binutils-doc
  gcc-11-locales cpp-doc gcc-11-doc manpages-dev flex bison
  gdb-aarch64-linux-gnu gcc-doc libtool-doc gfortran | fortran95-compiler
  gcj-jdk m4-doc
The following NEW packages will be installed:
  autoconf automake autotools-dev binutils-aarch64-linux-gnu
  cpp-11-aarch64-linux-gnu cpp-aarch64-linux-gnu g++-11-aarch64-linux-gnu
  g++-aarch64-linux-gnu gcc-11-aarch64-linux-gnu gcc-11-aarch64-linux-gnu-base
  gcc-11-cross-base gcc-12-cross-base gcc-aarch64-linux-gnu
  libasan6-arm64-cross libatomic1-arm64-cross libc6-arm64-cross
  libc6-dev-arm64-cross libgcc-11-dev-arm64-cross libgcc-s1-arm64-cross
  libglib2.0-0 libglib2.0-data libgomp1-arm64-cross libhwasan0-arm64-cross
  libicu70 libitm1-arm64-cross liblsan0-arm64-cross libltdl-dev libltdl7
  libsigs
[command output truncated]
 .../39-pkg-config_0.29.2-1ubuntu3_amd64.deb ...
Unpacking pkg-config (0.29.2-1ubuntu3) ...
Setting up gcc-11-aarch64-linux-gnu-base:amd64 (11.4.0-1ubuntu1~22.04cross1) ...
Setting up gcc-12-cross-base (12.3.0-1ubuntu1~22.04cross1) ...
Setting up xdg-user-dirs (0.17-2ubuntu4) ...
Setting up libglib2.0-0:amd64 (2.72.4-0ubuntu2.6) ...
No schema files found: doing nothing.
Setting up binutils-aarch64-linux-gnu (2.38-4ubuntu2.8) ...
Setting up autotools-dev (20220109.1) ...
Setting up libglib2.0-data (2.72.4-0ubuntu2.6) ...
Setting up libsigsegv2:amd64 (2.13-1ubuntu3) ...
Setting up libc6-arm64-cross (2.35-0ubuntu1cross3) ...
Setting up pkg-config (0.29.2-1ubuntu3) ...
Setting up libitm1-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up libltdl7:amd64 (2.4.6-15build2) ...
Setting up linux-libc-dev-arm64-cross (5.15.0-22.22cross3) ...
Setting up cpp-11-aarch64-linux-gnu (11.4.0-1ubuntu1~22.04cross1) ...
Setting up gcc-11-cross-base (11.4.0-1ubuntu1~22.04cross1) ...
Setting up libicu70:amd64 (70.1-2) ...
Setting up libgcc-s1-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up libatomic1-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up liblsan0-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up libgomp1-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up libtool (2.4.6-15build2) ...
Setting up libasan6-arm64-cross (11.4.0-1ubuntu1~22.04cross1) ...
Setting up libtsan0-arm64-cross (11.4.0-1ubuntu1~22.04cross1) ...
Setting up m4 (1.4.18-5ubuntu2) ...
Setting up libhwasan0-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up libc6-dev-arm64-cross (2.35-0ubuntu1cross3) ...
Setting up libstdc++6-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up cpp-aarch64-linux-gnu (4:11.2.0-1ubuntu1) ...
Setting up autoconf (2.71-2) ...
Setting up libxml2:amd64 (2.9.13+dfsg-1ubuntu0.9) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/automake.1.gz because associated file /usr/share/man/man1/automake-1.16.1.gz (of link group automake) doesn't exist
update-alternatives: warning: skip creation of /usr/share/man/man1/aclocal.1.gz because associated file /usr/share/man/man1/aclocal-1.16.1.gz (of link group automake) doesn't exist
Setting up libubsan1-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up libgcc-11-dev-arm64-cross (11.4.0-1ubuntu1~22.04cross1) ...
Setting up libltdl-dev:amd64 (2.4.6-15build2) ...
Setting up shared-mime-info (2.1-2) ...
Setting up gcc-11-aarch64-linux-gnu (11.4.0-1ubuntu1~22.04cross1) ...
Setting up libstdc++-11-dev-arm64-cross (11.4.0-1ubuntu1~22.04cross1) ...
Setting up g++-11-aarch64-linux-gnu (11.4.0-1ubuntu1~22.04cross1) ...
Setting up gcc-aarch64-linux-gnu (4:11.2.0-1ubuntu1) ...
Setting up g++-aarch64-linux-gnu (4:11.2.0-1ubuntu1) ...
Processing triggers for libc-bin (2.35-0ubuntu3.10) ...
↓ 80 lines
ASSISTANT

Now I need to build static libraries for arm64 (OpenSSL, brotli, zlib, zstd). Let me create a directory for building these dependencies:

compile-bench> mkdir -p /home/peter/arm64-deps /home/peter/result
[empty output]
ASSISTANT

Let me build zlib first:

compile-bench> cd /home/peter && wget -q https://zlib.net/zlib-1.3.1.tar.gz && tar -xzf zlib-1.3.1.tar.gz
[empty output]
ASSISTANT
compile-bench> cd /home/peter/zlib-1.3.1 && CC=aarch64-linux-gnu-gcc AR=aarch64-linux-gnu-ar RANLIB=aarch64-linux-gnu-ranlib ./configure --prefix=/home/peter/arm64-deps --static
Building static library libz.a version 1.3.1 with aarch64-linux-gnu-gcc.
Checking for size_t... Yes.
Checking for off64_t... Yes.
Checking for fseeko... Yes.
Checking for strerror... Yes.
Checking for unistd.h... Yes.
Checking for stdarg.h... Yes.
Checking whether to use vs[n]printf() or s[n]printf()... using vs[n]printf().
Checking for vsnprintf() in stdio.h... Yes.
Checking for return value of vsnprintf()... Yes.
Checking for attribute(visibility) support... Yes.
↓ 12 lines
ASSISTANT
compile-bench> cd /home/peter/zlib-1.3.1 && make -j$(nproc) && make install
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -I. -c -o example.o test/example.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o adler32.o adler32.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o crc32.o crc32.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o deflate.o deflate.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o infback.o infback.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o inffast.o inffast.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o inflate.o inflate.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o inftrees.o inftrees.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o trees.o trees.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o zutil.o zutil.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o compress.o compress.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o uncompr.o uncompr.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o gzclose.o gzclose.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o gzlib.o gzlib.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o gzread.o gzread.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o gzwrite.o gzwrite.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -I. -c -o minigzip.o test/minigzip.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -I. -D_FILE_OFFSET_BITS=64 -c -o example64.o test/example.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -I. -D_FILE_OFFSET_BITS=64 -c -o minigzip64.o test/minigzip.c
aarch64-linux-gnu-ar rc libz.a adler32.o crc32.o deflate.o infback.o inffast.o inflate.o inftrees.o trees.o zutil.o compress.o uncompr.o gzclose.o gzlib.o gzread.o gzwrite.o 
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -o example example.o -L. libz.a
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -o minigzip minigzip.o -L. libz.a
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -o example64 example64.o -L. libz.a
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -o minigzip64 minigzip64.o -L. libz.a
rm -f /home/peter/arm64-deps/lib/libz.a
cp libz.a /home/peter/arm64-deps/lib
chmod 644 /home/peter/arm64-deps/lib/libz.a
rm -f /home/peter/arm64-deps/share/man/man3/zlib.3
cp zlib.3 /home/peter/arm64-deps/share/man/man3
chmod 644 /home/peter/arm64-deps/share/man/man3/zlib.3
rm -f /home/peter/arm64-deps/lib/pkgconfig/zlib.pc
cp zlib.pc /home/peter/arm64-deps/lib/pkgconfig
chmod 644 /home/peter/arm64-deps/lib/pkgconfig/zlib.pc
rm -f /home/peter/arm64-deps/include/zlib.h /home/peter/arm64-deps/include/zconf.h
cp zlib.h zconf.h /home/peter/arm64-deps/include
chmod 644 /home/peter/arm64-deps/include/zlib.h /home/peter/arm64-deps/include/zconf.h
↓ 37 lines
ASSISTANT

Now let's build OpenSSL for arm64 with TLS 1.3 support:

compile-bench> cd /home/peter && wget -q https://www.openssl.org/source/openssl-3.0.15.tar.gz && tar -xzf openssl-3.0.15.tar.gz
[empty output]
ASSISTANT
compile-bench> cd /home/peter/openssl-3.0.15 && ./Configure linux-aarch64 --prefix=/home/peter/arm64-deps --cross-compile-prefix=aarch64-linux-gnu- no-shared no-dso
Configuring OpenSSL version 3.0.15 for target linux-aarch64
Using os-specific seed configuration
Created configdata.pm
Running configdata.pm
Created Makefile.in
Created Makefile
Created include/openssl/configuration.h

**********************************************************************
***                                                                ***
***   OpenSSL has been successfully configured                     ***
***                                                                ***
***   If you encounter a problem while building, please open an    ***
***   issue on GitHub <https://github.com/openssl/openssl/issues>  ***
***   and include the output from the following command:           ***
***                                                                ***
***       perl configdata.pm --dump                                ***
***                                                                ***
***   (If you are new to OpenSSL, you might want to consult the    ***
***   'Troubleshooting' section in the INSTALL.md file first)      ***
***                                                                ***
**********************************************************************
↓ 23 lines
ASSISTANT
compile-bench> cd /home/peter/openssl-3.0.15 && make -j$(nproc)
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/crypto/bn_conf.h.in > include/crypto/bn_conf.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/crypto/dso_conf.h.in > include/crypto/dso_conf.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/asn1.h.in > include/openssl/asn1.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/asn1t.h.in > include/openssl/asn1t.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/bio.h.in > include/openssl/bio.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/cmp.h.in > include/openssl/cmp.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/cms.h.in > include/openssl/cms.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/conf.h.in > include/openssl/conf.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/crmf.h.in > include/openssl/crmf.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/crypto.h.in > include/openssl/crypto.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/ct.h.in > include/openssl/ct.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/err.h.in > include/openssl/err.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/ess.h.in > include/openssl/ess.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/fipskey.h.in > include/openssl/fipskey.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/lhash.h.in > include/openssl/lhash.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/ocsp.h.in > include/openssl/ocsp.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/opensslv.h.in > include/openssl/opensslv.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/pkcs12.h.in > include/openssl/pkcs12.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/pkcs7.h.in > include/openssl/pkcs7.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/safestack.h.in > include/openssl/safestack.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/srp.h.in > include/openssl/srp.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/ssl.h.in > include/openssl/ssl.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/ui.h.in > include/openssl/ui.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/x509.h.in > include/openssl/x509.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/x509_vfy.h.in > include/openssl/x509_vfy.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/x509v3.h.in 
[command output truncated]
test \
	test/wpackettest-bin-wpackettest.o \
	libssl.a test/libtestutil.a libcrypto.a -ldl -pthread 
rm -f test/x509_check_cert_pkey_test
${LDCMD:-aarch64-linux-gnu-gcc} -pthread -Wa,--noexecstack -Wall -O3 -L.   \
	-o test/x509_check_cert_pkey_test \
	test/x509_check_cert_pkey_test-bin-x509_check_cert_pkey_test.o \
	test/libtestutil.a -lcrypto -ldl -pthread 
rm -f test/x509_dup_cert_test
${LDCMD:-aarch64-linux-gnu-gcc} -pthread -Wa,--noexecstack -Wall -O3 -L.   \
	-o test/x509_dup_cert_test \
	test/x509_dup_cert_test-bin-x509_dup_cert_test.o \
	test/libtestutil.a -lcrypto -ldl -pthread 
rm -f test/x509_internal_test
${LDCMD:-aarch64-linux-gnu-gcc} -pthread -Wa,--noexecstack -Wall -O3   \
	-o test/x509_internal_test \
	test/x509_internal_test-bin-x509_internal_test.o \
	test/libtestutil.a libcrypto.a -ldl -pthread 
rm -f test/x509_time_test
${LDCMD:-aarch64-linux-gnu-gcc} -pthread -Wa,--noexecstack -Wall -O3 -L.   \
	-o test/x509_time_test \
	test/x509_time_test-bin-x509_time_test.o \
	test/libtestutil.a -lcrypto -ldl -pthread 
rm -f test/x509aux
${LDCMD:-aarch64-linux-gnu-gcc} -pthread -Wa,--noexecstack -Wall -O3 -L.   \
	-o test/x509aux \
	test/x509aux-bin-x509aux.o \
	test/libtestutil.a -lcrypto -ldl -pthread 
rm -f apps/openssl
${LDCMD:-aarch64-linux-gnu-gcc} -pthread -Wa,--noexecstack -Wall -O3 -L.   \
	-o apps/openssl \
	apps/lib/openssl-bin-cmp_mock_srv.o \
	apps/openssl-bin-asn1parse.o apps/openssl-bin-ca.o \
	apps/openssl-bin-ciphers.o apps/openssl-bin-cmp.o \
	apps/openssl-bin-cms.o apps/openssl-bin-crl.o \
	apps/openssl-bin-crl2pkcs7.o apps/openssl-bin-dgst.o \
	apps/openssl-bin-dhparam.o apps/openssl-bin-dsa.o \
	apps/openssl-bin-dsaparam.o apps/openssl-bin-ec.o \
	apps/openssl-bin-ecparam.o apps/openssl-bin-enc.o \
	apps/openssl-bin-engine.o apps/openssl-bin-errstr.o \
	apps/openssl-bin-fipsinstall.o apps/openssl-bin-gendsa.o \
	apps/openssl-bin-genpkey.o apps/openssl-bin-genrsa.o \
	apps/openssl-bin-info.o apps/openssl-bin-kdf.o \
	apps/openssl-bin-list.o apps/openssl-bin-mac.o \
	apps/openssl-bin-nseq.o apps/openssl-bin-ocsp.o \
	apps/openssl-bin-openssl.o apps/openssl-bin-passwd.o \
	apps/openssl-bin-pkcs12.o apps/openssl-bin-pkcs7.o \
	apps/openssl-bin-pkcs8.o apps/openssl-bin-pkey.o \
	apps/openssl-bin-pkeyparam.o apps/openssl-bin-pkeyutl.o \
	apps/openssl-bin-prime.o apps/openssl-bin-progs.o \
	apps/openssl-bin-rand.o apps/openssl-bin-rehash.o \
	apps/openssl-bin-req.o apps/openssl-bin-rsa.o \
	apps/openssl-bin-rsautl.o apps/openssl-bin-s_client.o \
	apps/openssl-bin-s_server.o apps/openssl-bin-s_time.o \
	apps/openssl-bin-sess_id.o apps/openssl-bin-smime.o \
	apps/openssl-bin-speed.o apps/openssl-bin-spkac.o \
	apps/openssl-bin-srp.o apps/openssl-bin-storeutl.o \
	apps/openssl-bin-ts.o apps/openssl-bin-verify.o \
	apps/openssl-bin-version.o apps/openssl-bin-x509.o \
	apps/libapps.a -lssl -lcrypto -ldl -pthread 
make[1]: Leaving directory '/home/peter/openssl-3.0.15'
↓ 89 lines
ASSISTANT
compile-bench> cd /home/peter/openssl-3.0.15 && make install_sw
"make" depend && "make" _build_libs
make[1]: Entering directory '/home/peter/openssl-3.0.15'
make[1]: Leaving directory '/home/peter/openssl-3.0.15'
make[1]: Entering directory '/home/peter/openssl-3.0.15'
make[1]: Leaving directory '/home/peter/openssl-3.0.15'
*** Installing runtime libraries
*** Installing development files
created directory `/home/peter/arm64-deps/include/openssl'
install ./include/openssl/aes.h -> /home/peter/arm64-deps/include/openssl/aes.h
install ./include/openssl/asn1.h -> /home/peter/arm64-deps/include/openssl/asn1.h
install ./include/openssl/asn1_mac.h -> /home/peter/arm64-deps/include/openssl/asn1_mac.h
install ./include/openssl/asn1err.h -> /home/peter/arm64-deps/include/openssl/asn1err.h
install ./include/openssl/asn1t.h -> /home/peter/arm64-deps/include/openssl/asn1t.h
install ./include/openssl/async.h -> /home/peter/arm64-deps/include/openssl/async.h
install ./include/openssl/asyncerr.h -> /home/peter/arm64-deps/include/openssl/asyncerr.h
install ./include/openssl/bio.h -> /home/peter/arm64-deps/include/openssl/bio.h
install ./include/openssl/bioerr.h -> /home/peter/arm64-deps/include/openssl/bioerr.h
install ./include/openssl/blowfish.h -> /home/peter/arm64-deps/include/openssl/blowfish.h
install ./include/openssl/bn.h -> /home/peter/arm64-deps/include/openssl/bn.h
install ./include/openssl/bnerr.h -> /home/peter/arm64-deps/include/openssl/bnerr.h
install ./include/openssl/buffer.h -> /home/peter/arm64-deps/include/openssl/buffer.h
install ./include/openssl/buffererr.h -> /home/peter/arm64-deps/include/openssl/buffererr.h
install ./include/openssl/camellia.h -> /home/peter/arm64-deps/include/openssl/camellia.h
install ./include/openssl/cast.h -> /home/peter/arm64-deps/include/openssl/cast.h
install ./include/openssl/cmac.h -> /home/peter/arm64-deps/include/openssl/cmac.h
install ./include/openssl/cmp.h -> /home/peter/arm64-deps/include/openssl/cmp.h
install ./include/openssl/cmp_util.h -> /home/peter/arm64-deps/include/openssl/cmp_util.h
install ./include/openssl/cmperr.h -> /home/peter/arm64-deps/include/openssl/cmperr.h
install ./include/openssl/cms.h -> /home/peter/arm64-deps/include/openssl/cms.h
install ./include/openssl/cmserr.h -> /home/peter/arm64-deps/include/openssl/cmserr.h
install ./include/openssl/comp.h -> /home/peter/arm64-deps/include/openssl/comp.h
install ./include/openssl/comperr.h -> /home/peter/arm64-deps/include/openssl/comperr.h
install ./include/openssl/conf.h -> /home/peter/arm64-deps/include/openssl/conf.h
install ./include/openssl/conf_api.h -> /home/peter/arm64-deps/include/openssl/conf_api.h
install ./include/openssl/conferr.h -> /home/peter/arm64-deps/include/openssl/conferr.h
install ./include/openssl/configuration.h -> /home/peter/arm64-deps/include/openssl/configuration.h
install ./include/openssl/conftypes.h -> /home/peter/arm64-deps/include/openssl/conftypes.h
install ./include/openssl/core.h -> /home/peter/arm64-deps/include/openssl/core.h
i
[command output truncated]
ll ./include/openssl/sslerr_legacy.h -> /home/peter/arm64-deps/include/openssl/sslerr_legacy.h
install ./include/openssl/stack.h -> /home/peter/arm64-deps/include/openssl/stack.h
install ./include/openssl/store.h -> /home/peter/arm64-deps/include/openssl/store.h
install ./include/openssl/storeerr.h -> /home/peter/arm64-deps/include/openssl/storeerr.h
install ./include/openssl/symhacks.h -> /home/peter/arm64-deps/include/openssl/symhacks.h
install ./include/openssl/tls1.h -> /home/peter/arm64-deps/include/openssl/tls1.h
install ./include/openssl/trace.h -> /home/peter/arm64-deps/include/openssl/trace.h
install ./include/openssl/ts.h -> /home/peter/arm64-deps/include/openssl/ts.h
install ./include/openssl/tserr.h -> /home/peter/arm64-deps/include/openssl/tserr.h
install ./include/openssl/txt_db.h -> /home/peter/arm64-deps/include/openssl/txt_db.h
install ./include/openssl/types.h -> /home/peter/arm64-deps/include/openssl/types.h
install ./include/openssl/ui.h -> /home/peter/arm64-deps/include/openssl/ui.h
install ./include/openssl/uierr.h -> /home/peter/arm64-deps/include/openssl/uierr.h
install ./include/openssl/whrlpool.h -> /home/peter/arm64-deps/include/openssl/whrlpool.h
install ./include/openssl/x509.h -> /home/peter/arm64-deps/include/openssl/x509.h
install ./include/openssl/x509_vfy.h -> /home/peter/arm64-deps/include/openssl/x509_vfy.h
install ./include/openssl/x509err.h -> /home/peter/arm64-deps/include/openssl/x509err.h
install ./include/openssl/x509v3.h -> /home/peter/arm64-deps/include/openssl/x509v3.h
install ./include/openssl/x509v3err.h -> /home/peter/arm64-deps/include/openssl/x509v3err.h
install libcrypto.a -> /home/peter/arm64-deps/lib/libcrypto.a
install libssl.a -> /home/peter/arm64-deps/lib/libssl.a
install libcrypto.pc -> /home/peter/arm64-deps/lib/pkgconfig/libcrypto.pc
install libssl.pc -> /home/peter/arm64-deps/lib/pkgconfig/libssl.pc
install openssl.pc -> /home/peter/arm64-deps/lib/pkgconfig/openssl.pc
"make" depend && "make" _build_modules
make[1]: Entering directory '/home/peter/openssl-3.0.15'
make[1]: Leaving directory '/home/peter/openssl-3.0.15'
make[1]: Entering directory '/home/peter/openssl-3.0.15'
make[1]: Nothing to be done for '_build_modules'.
make[1]: Leaving directory '/home/peter/openssl-3.0.15'
created directory `/home/peter/arm64-deps/lib/engines-3'
*** Installing engines
created directory `/home/peter/arm64-deps/lib/ossl-modules'
*** Installing modules
"make" depend && "make" _build_programs
make[1]: Entering directory '/home/peter/openssl-3.0.15'
make[1]: Leaving directory '/home/peter/openssl-3.0.15'
make[1]: Entering directory '/home/peter/openssl-3.0.15'
make[1]: Nothing to be done for '_build_programs'.
make[1]: Leaving directory '/home/peter/openssl-3.0.15'
created directory `/home/peter/arm64-deps/bin'
*** Installing runtime programs
install apps/openssl -> /home/peter/arm64-deps/bin/openssl
install tools/c_rehash -> /home/peter/arm64-deps/bin/c_rehash
↓ 85 lines
ASSISTANT

Now let's build brotli:

compile-bench> sudo DEBIAN_FRONTEND=noninteractive apt-get install -y cmake
Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 3%

Reading package lists... 3%

Reading package lists... 4%

Reading package lists... 4%

Reading package lists... 41%

Reading package lists... 41%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 51%

Reading package lists... 51%

Reading package lists... 67%

Reading package lists... 67%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 80%

Reading package lists... 80%

Reading package lists... 96%

Reading package lists... 96%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... Done


Building dependency tree... 0%

Building dependency tree... 0%

Building dependency tree... 50%

Building dependency tree... 50%

Building dependency tree... 78%

Building dependency tree... Done


Reading state information... 0% 

Reading state information... 1%

Reading state information... Done

The following additional packages will be installed:
  cmake-data dh-elpa-helper emacsen-common libarchive13 libexpat1 libjsoncpp25
  librhash0 libuv1
Suggested packages:
  cmake-doc ninja-build cmake-format lrzip
The following NEW packages will be installed:
  cmake cmake-data dh-elpa-helper emacsen-common libarchive13 libexpat1
  libjsoncpp25 librhash0 libuv1
0 upgraded, 9 newly installed, 0 to remove and 10 not upgraded.
Need to get 7703 kB of archives.
After this operation, 33.5 MB of additional disk space will be used.

0% [Working]
            
Get:1 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libexpat1 amd64 2.4.7-1ubuntu0.6 [92.1 kB]

0% [1 libexpat1 14.2 kB/92.1 kB 15%]
                                    
3% [Working]
            
Get:2 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libuv1 amd64 1.43.0-1ubuntu0.1 [92.7 kB]

3% [2 libuv1 2605 B/92.7 kB 3%]
                               
Get:3 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libarchive13 amd64 3.6.0-1ubuntu1.5 [368 kB]

6% [3 libarchive13 2277 B/368 kB 1%]
                                    
Get:4 http://archive.ubuntu.com/ubuntu jammy/main amd64 libjsoncpp25 amd64 1.9.5-3 [80.0 kB]

12% [4 libjsoncpp25 3317 B/80.0 kB 4%]
                                      
15% [Waiting for headers]
                         
Get:5 http://archive.ubuntu.com/ubuntu jammy/main amd64 librhash0 amd64 1.4.2-1ubuntu1 [125 kB]

16% [5 librhash0 3894 B/125 kB 3%]
                                  
19% [Waiting for headers]
                         
Get:6 http://archive.ubuntu.com/ubuntu jammy/main amd64 dh-elpa-helper all 2.0.9ubuntu1 [7610 B]

19% [6 dh-elpa-helper 5149 B/7610 B 68%]
                       
[command output truncated]
r headers]
                         
Get:9 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 cmake amd64 3.22.1-1ubuntu1.22.04.2 [5010 kB]

46% [9 cmake 45.1 kB/5010 kB 1%]
                                
100% [Working]
              
Fetched 7703 kB in 0s (24.2 MB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package libexpat1:amd64.
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 14516 files and directories currently installed.)
Preparing to unpack .../0-libexpat1_2.4.7-1ubuntu0.6_amd64.deb ...
Unpacking libexpat1:amd64 (2.4.7-1ubuntu0.6) ...
Selecting previously unselected package libuv1:amd64.
Preparing to unpack .../1-libuv1_1.43.0-1ubuntu0.1_amd64.deb ...
Unpacking libuv1:amd64 (1.43.0-1ubuntu0.1) ...
Selecting previously unselected package libarchive13:amd64.
Preparing to unpack .../2-libarchive13_3.6.0-1ubuntu1.5_amd64.deb ...
Unpacking libarchive13:amd64 (3.6.0-1ubuntu1.5) ...
Selecting previously unselected package libjsoncpp25:amd64.
Preparing to unpack .../3-libjsoncpp25_1.9.5-3_amd64.deb ...
Unpacking libjsoncpp25:amd64 (1.9.5-3) ...
Selecting previously unselected package librhash0:amd64.
Preparing to unpack .../4-librhash0_1.4.2-1ubuntu1_amd64.deb ...
Unpacking librhash0:amd64 (1.4.2-1ubuntu1) ...
Selecting previously unselected package dh-elpa-helper.
Preparing to unpack .../5-dh-elpa-helper_2.0.9ubuntu1_all.deb ...
Unpacking dh-elpa-helper (2.0.9ubuntu1) ...
Selecting previously unselected package emacsen-common.
Preparing to unpack .../6-emacsen-common_3.0.4_all.deb ...
Unpacking emacsen-common (3.0.4) ...
Selecting previously unselected package cmake-data.
Preparing to unpack .../7-cmake-data_3.22.1-1ubuntu1.22.04.2_all.deb ...
Unpacking cmake-data (3.22.1-1ubuntu1.22.04.2) ...
Selecting previously unselected package cmake.
Preparing to unpack .../8-cmake_3.22.1-1ubuntu1.22.04.2_amd64.deb ...
Unpacking cmake (3.22.1-1ubuntu1.22.04.2) ...
Setting up libexpat1:amd64 (2.4.7-1ubuntu0.6) ...
Setting up libarchive13:amd64 (3.6.0-1ubuntu1.5) ...
Setting up libuv1:amd64 (1.43.0-1ubuntu0.1) ...
Setting up emacsen-common (3.0.4) ...
Setting up dh-elpa-helper (2.0.9ubuntu1) ...
Setting up libjsoncpp25:amd64 (1.9.5-3) ...
Setting up librhash0:amd64 (1.4.2-1ubuntu1) ...
Setting up cmake-data (3.22.1-1ubuntu1.22.04.2) ...
Setting up cmake (3.22.1-1ubuntu1.22.04.2) ...
Processing triggers for libc-bin (2.35-0ubuntu3.10) ...
↓ 64 lines
ASSISTANT
compile-bench> cd /home/peter && git clone --depth 1 https://github.com/google/brotli.git
bash: git: command not found
ASSISTANT
compile-bench> sudo DEBIAN_FRONTEND=noninteractive apt-get install -y git
Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 3%

Reading package lists... 3%

Reading package lists... 4%

Reading package lists... 4%

Reading package lists... 41%

Reading package lists... 41%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 51%

Reading package lists... 51%

Reading package lists... 67%

Reading package lists... 67%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 80%

Reading package lists... 80%

Reading package lists... 96%

Reading package lists... 96%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... Done


Building dependency tree... 0%

Building dependency tree... 0%

Building dependency tree... 50%

Building dependency tree... 50%

Building dependency tree... 72%

Building dependency tree... Done


Reading state information... 0% 

Reading state information... 0%

Reading state information... Done

The following additional packages will be installed:
  git-man less libbsd0 libcbor0.8 libcurl3-gnutls libedit2 liberror-perl
  libfido2-1 libmd0 libx11-6 libx11-data libxau6 libxcb1 libxdmcp6 libxext6
  libxmuu1 openssh-client xauth
Suggested packages:
  gettext-base git-daemon-run | git-daemon-sysvinit git-doc git-email git-gui
  gitk gitweb git-cvs git-mediawiki git-svn keychain libpam-ssh monkeysphere
  ssh-askpass
The following NEW packages will be installed:
  git git-man less libbsd0 libcbor0.8 libcurl3-gnutls libedit2 liberror-perl
  libfido2-1 libmd0 libx11-6 libx11-data libxau6 libxcb1 libxdmcp6 libxext6
  libxmuu1 openssh-client xauth
0 upgraded, 19 newly installed, 0 to remove and 10 not upgraded.
Need to get 6672 kB of archives.
After this operation, 29.5 MB of additional disk space will be used.

0% [Working]
            
Get:1 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 less amd64 590-1ubuntu0.22.04.3 [142 kB]

0% [1 less 14.2 kB/142 kB 10%]
                              
3% [Working]
            
Get:2 http://archive.ubuntu.com/ubuntu jammy/main amd64 libmd0 amd64 1.0.4-1build1 [23.0 kB]

3% [2 libmd0 2615 B/23.0 kB 11%]
                                
4% [Waiting for headers]
                        
Get:3 http://archive.ubuntu.com/ubuntu jammy/main amd64 libbsd0 amd64 0.11.5-1 [44.8 kB]

4% [3 libbsd0 1090 B/44.8 kB 2%]
                                
Get:4 http://archive.ubuntu.com/ubuntu jammy/main amd64 libcbor0.8 amd64 0.8.0-2ubuntu1 [24.6 kB]

6% [4 libcbor0.8 2385 B/24.6 kB 10%]
                                    
7% [Waiting for headers]
                        
Get:5 http://archive.ubuntu.com/ubuntu jammy/main amd64 libedit2 amd64 3.1-20210910-1build1
[command output truncated]
ck .../11-libxext6_2%3a1.3.4-1build1_amd64.deb ...
Unpacking libxext6:amd64 (2:1.3.4-1build1) ...
Selecting previously unselected package libxmuu1:amd64.
Preparing to unpack .../12-libxmuu1_2%3a1.1.3-3_amd64.deb ...
Unpacking libxmuu1:amd64 (2:1.1.3-3) ...
Selecting previously unselected package openssh-client.
Preparing to unpack .../13-openssh-client_1%3a8.9p1-3ubuntu0.13_amd64.deb ...
Unpacking openssh-client (1:8.9p1-3ubuntu0.13) ...
Selecting previously unselected package xauth.
Preparing to unpack .../14-xauth_1%3a1.1-1build2_amd64.deb ...
Unpacking xauth (1:1.1-1build2) ...
Selecting previously unselected package libcurl3-gnutls:amd64.
Preparing to unpack .../15-libcurl3-gnutls_7.81.0-1ubuntu1.21_amd64.deb ...
Unpacking libcurl3-gnutls:amd64 (7.81.0-1ubuntu1.21) ...
Selecting previously unselected package liberror-perl.
Preparing to unpack .../16-liberror-perl_0.17029-1_all.deb ...
Unpacking liberror-perl (0.17029-1) ...
Selecting previously unselected package git-man.
Preparing to unpack .../17-git-man_1%3a2.34.1-1ubuntu1.15_all.deb ...
Unpacking git-man (1:2.34.1-1ubuntu1.15) ...
Selecting previously unselected package git.
Preparing to unpack .../18-git_1%3a2.34.1-1ubuntu1.15_amd64.deb ...
Unpacking git (1:2.34.1-1ubuntu1.15) ...
Setting up libxau6:amd64 (1:1.0.9-1build5) ...
Setting up libcbor0.8:amd64 (0.8.0-2ubuntu1) ...
Setting up less (590-1ubuntu0.22.04.3) ...
Setting up libcurl3-gnutls:amd64 (7.81.0-1ubuntu1.21) ...
Setting up liberror-perl (0.17029-1) ...
Setting up libx11-data (2:1.7.5-1ubuntu0.3) ...
Setting up libmd0:amd64 (1.0.4-1build1) ...
Setting up git-man (1:2.34.1-1ubuntu1.15) ...
Setting up libfido2-1:amd64 (1.10.0-1) ...
Setting up libbsd0:amd64 (0.11.5-1) ...
Setting up libxdmcp6:amd64 (1:1.1.3-0ubuntu5) ...
Setting up libxcb1:amd64 (1.14-3ubuntu3) ...
Setting up libedit2:amd64 (3.1-20210910-1build1) ...
Setting up git (1:2.34.1-1ubuntu1.15) ...
Setting up libx11-6:amd64 (2:1.7.5-1ubuntu0.3) ...
Setting up libxmuu1:amd64 (2:1.1.3-3) ...
Setting up openssh-client (1:8.9p1-3ubuntu0.13) ...
update-alternatives: using /usr/bin/ssh to provide /usr/bin/rsh (rsh) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/rsh.1.gz because associated file /usr/share/man/man1/ssh.1.gz (of link group rsh) doesn't exist
update-alternatives: using /usr/bin/slogin to provide /usr/bin/rlogin (rlogin) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/rlogin.1.gz because associated file /usr/share/man/man1/slogin.1.gz (of link group rlogin) doesn't exist
update-alternatives: using /usr/bin/scp to provide /usr/bin/rcp (rcp) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/rcp.1.gz because associated file /usr/share/man/man1/scp.1.gz (of link group rcp) doesn't exist
Setting up libxext6:amd64 (2:1.3.4-1build1) ...
Setting up xauth (1:1.1-1build2) ...
Processing triggers for libc-bin (2.35-0ubuntu3.10) ...
↓ 74 lines
ASSISTANT
compile-bench> cd /home/peter && git clone --depth 1 https://github.com/google/brotli.git
Cloning into 'brotli'...
remote: Enumerating objects: 437, done.
remote: Counting objects:   0% (1/437)
remote: Counting objects:   1% (5/437)
remote: Counting objects:   2% (9/437)
remote: Counting objects:   3% (14/437)
remote: Counting objects:   4% (18/437)
remote: Counting objects:   5% (22/437)
remote: Counting objects:   6% (27/437)
remote: Counting objects:   7% (31/437)
remote: Counting objects:   8% (35/437)
remote: Counting objects:   9% (40/437)
remote: Counting objects:  10% (44/437)
remote: Counting objects:  11% (49/437)
remote: Counting objects:  12% (53/437)
remote: Counting objects:  13% (57/437)
remote: Counting objects:  14% (62/437)
remote: Counting objects:  15% (66/437)
remote: Counting objects:  16% (70/437)
remote: Counting objects:  17% (75/437)
remote: Counting objects:  18% (79/437)
remote: Counting objects:  19% (84/437)
remote: Counting objects:  20% (88/437)
remote: Counting objects:  21% (92/437)
remote: Counting objects:  22% (97/437)
remote: Counting objects:  23% (101/437)
remote: Counting objects:  24% (105/437)
remote: Counting objects:  25% (110/437)
remote: Counting objects:  26% (114/437)
remote: Counting objects:  27% (118/437)
remote: Counting objects:  28% (123/437)
remote: Counting objects:  29% (127/437)
remote: Counting objects:  30% (132/437)
remote: Counting objects:  31% (136/437)
remote: Counting objects:  32% (140/437)
remote: Counting objects:  33% (145/437)
remote: Counting objects:  34% (149/437)
remote: Counting objects:  35% (153/437)
remote: Counting objects:  36% (158/437)
remote: Counting objects:  37% (162/437)
remote: Counting objects:  38% (167/437)
remote: Counting objects:  39% (171/437)
remote: Counting objects:  40% (175/437)
remote: Counting objects:  41% (180/437)
remote: Counting objects:  42% (184/437)
remote: Counting objects:  43% (188/437)
remote: Counting objects:  44% (193/437)
remote: Counting objects:  45% (197/437)
remote: Counting objects:  46% (202/437)
remote: Counting objects:  47% (206/437)
remote: Counting objects:  48% (210/437)
remote: Counting objects:  49% (215/437)
remote: Counting objects:  50% (219/437)
remote: Counting objects:  51% (223/437)
remote: Counting objects:  52% (228/437)
remote: Counting objects:  53% (232/437)
remote: Counting objects:  54% (236/437)
remote: Counting objects:  55% (241/437)
remote: Counting objects:  56% (245/437)
remote: Counting objects:  57% (250/437)
remote: Counting objects:  58% (254/437)
remote: Counting objects:  59% (258/437)
remote: Counting objects:  60% (263/437)
remote: Counting objects:  61% (267/437)
remote: Counting objects:  62% (271/437)
remote: Counting objects:  63% (276/437)
remote: Counting objects:  64% (280/437)
remote: Counting objects:  65% (285/437)
remote: Counting objects:  66% (289/437)
remote: Counting objects:  67% (293/437)
remote: Counting objects:  68% (298/437)
remote: Counting objects:  69% (302/437)
remote: Counting objects:  70% (306/437)
remote: Counting objects:  71% (311/437)
remote:
[command output truncated]
 5.85 MiB | 11.70 MiB/s
Receiving objects:  81% (354/437), 5.85 MiB | 11.70 MiB/s
Receiving objects:  82% (359/437), 5.85 MiB | 11.70 MiB/s
Receiving objects:  83% (363/437), 5.85 MiB | 11.70 MiB/s
Receiving objects:  84% (368/437), 5.85 MiB | 11.70 MiB/s
Receiving objects:  85% (372/437), 5.85 MiB | 11.70 MiB/s
Receiving objects:  86% (376/437), 5.85 MiB | 11.70 MiB/s
Receiving objects:  87% (381/437), 5.85 MiB | 11.70 MiB/s
Receiving objects:  88% (385/437), 5.85 MiB | 11.70 MiB/s
Receiving objects:  89% (389/437), 5.85 MiB | 11.70 MiB/s
Receiving objects:  90% (394/437), 5.85 MiB | 11.70 MiB/s
Receiving objects:  91% (398/437), 5.85 MiB | 11.70 MiB/s
Receiving objects:  92% (403/437), 5.85 MiB | 11.70 MiB/s
Receiving objects:  93% (407/437), 5.85 MiB | 11.70 MiB/s
Receiving objects:  94% (411/437), 5.85 MiB | 11.70 MiB/s
remote: Total 437 (delta 53), reused 261 (delta 24), pack-reused 0 (from 0)
Receiving objects:  95% (416/437), 5.85 MiB | 11.70 MiB/s
Receiving objects:  96% (420/437), 5.85 MiB | 11.70 MiB/s
Receiving objects:  97% (424/437), 5.85 MiB | 11.70 MiB/s
Receiving objects:  98% (429/437), 5.85 MiB | 11.70 MiB/s
Receiving objects:  99% (433/437), 5.85 MiB | 11.70 MiB/s
Receiving objects: 100% (437/437), 5.85 MiB | 11.70 MiB/s
Receiving objects: 100% (437/437), 31.70 MiB | 33.36 MiB/s, done.
Resolving deltas:   0% (0/53)
Resolving deltas:   1% (1/53)
Resolving deltas:   3% (2/53)
Resolving deltas:   5% (3/53)
Resolving deltas:   7% (4/53)
Resolving deltas:   9% (5/53)
Resolving deltas:  11% (6/53)
Resolving deltas:  13% (7/53)
Resolving deltas:  15% (8/53)
Resolving deltas:  16% (9/53)
Resolving deltas:  18% (10/53)
Resolving deltas:  20% (11/53)
Resolving deltas:  22% (12/53)
Resolving deltas:  24% (13/53)
Resolving deltas:  26% (14/53)
Resolving deltas:  30% (16/53)
Resolving deltas:  32% (17/53)
Resolving deltas:  33% (18/53)
Resolving deltas:  35% (19/53)
Resolving deltas:  37% (20/53)
Resolving deltas:  39% (21/53)
Resolving deltas:  41% (22/53)
Resolving deltas:  43% (23/53)
Resolving deltas:  45% (24/53)
Resolving deltas:  47% (25/53)
Resolving deltas:  49% (26/53)
Resolving deltas:  50% (27/53)
Resolving deltas:  52% (28/53)
Resolving deltas:  54% (29/53)
Resolving deltas:  56% (30/53)
Resolving deltas:  58% (31/53)
Resolving deltas:  60% (32/53)
Resolving deltas:  62% (33/53)
Resolving deltas:  64% (34/53)
Resolving deltas:  66% (35/53)
Resolving deltas:  67% (36/53)
Resolving deltas:  69% (37/53)
Resolving deltas:  71% (38/53)
Resolving deltas:  73% (39/53)
Resolving deltas:  75% (40/53)
Resolving deltas:  77% (41/53)
Resolving deltas:  79% (42/53)
Resolving deltas:  81% (43/53)
Resolving deltas:  83% (44/53)
Resolving deltas:  84% (45/53)
Resolving deltas:  86% (46/53)
Resolving deltas:  88% (47/53)
Resolving deltas:  90% (48/53)
Resolving deltas:  92% (49/53)
Resolving deltas:  94% (50/53)
Resolving deltas:  96% (51/53)
Resolving deltas:  98% (52/53)
Resolving deltas: 100% (53/53)
Resolving deltas: 100% (53/53), done.
↓ 8 lines
ASSISTANT
compile-bench> mkdir -p /home/peter/brotli/build && cd /home/peter/brotli/build && cmake -DCMAKE_C_COMPILER=aarch64-linux-gnu-gcc -DCMAKE_SYSTEM_NAME=Linux -DCMAKE_SYSTEM_PROCESSOR=aarch64 -DCMAKE_INSTALL_PREFIX=/home/peter/arm64-deps -DBUILD_SHARED_LIBS=OFF ..
-- The C compiler identification is GNU 11.4.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/aarch64-linux-gnu-gcc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Setting build type to Release as none was specified.
-- Performing Test BROTLI_EMSCRIPTEN
-- Performing Test BROTLI_EMSCRIPTEN - Failed
-- Compiler is not EMSCRIPTEN
-- Looking for log2 in m
-- Looking for log2 in m - found
-- Detected aarch64-linux-gnu cross-compilation
-- Configuring done
-- Generating done
-- Build files have been written to: /home/peter/brotli/build
↓ 17 lines
ASSISTANT
compile-bench> cd /home/peter/brotli/build && make -j$(nproc) && make install
[  2%] Building C object CMakeFiles/brotlicommon.dir/c/common/constants.c.o
[  5%] Building C object CMakeFiles/brotlicommon.dir/c/common/context.c.o
[ 10%] Building C object CMakeFiles/brotlicommon.dir/c/common/shared_dictionary.c.o
[ 10%] Building C object CMakeFiles/brotlicommon.dir/c/common/dictionary.c.o
[ 15%] Building C object CMakeFiles/brotlicommon.dir/c/common/transform.c.o
[ 15%] Building C object CMakeFiles/brotlicommon.dir/c/common/platform.c.o
[ 17%] Linking C static library libbrotlicommon.a
[ 17%] Built target brotlicommon
[ 20%] Building C object CMakeFiles/brotlidec.dir/c/dec/decode.c.o
[ 30%] Building C object CMakeFiles/brotlidec.dir/c/dec/bit_reader.c.o
[ 30%] Building C object CMakeFiles/brotlidec.dir/c/dec/huffman.c.o
[ 30%] Building C object CMakeFiles/brotlidec.dir/c/dec/prefix.c.o
[ 30%] Building C object CMakeFiles/brotlidec.dir/c/dec/state.c.o
[ 32%] Building C object CMakeFiles/brotlienc.dir/c/enc/backward_references.c.o
[ 35%] Building C object CMakeFiles/brotlidec.dir/c/dec/static_init.c.o
[ 37%] Building C object CMakeFiles/brotlienc.dir/c/enc/backward_references_hq.c.o
[ 40%] Building C object CMakeFiles/brotlienc.dir/c/enc/bit_cost.c.o
[ 42%] Building C object CMakeFiles/brotlienc.dir/c/enc/block_splitter.c.o
[ 45%] Building C object CMakeFiles/brotlienc.dir/c/enc/brotli_bit_stream.c.o
[ 47%] Building C object CMakeFiles/brotlienc.dir/c/enc/cluster.c.o
[ 50%] Building C object CMakeFiles/brotlienc.dir/c/enc/command.c.o
[ 52%] Building C object CMakeFiles/brotlienc.dir/c/enc/compound_dictionary.c.o
[ 55%] Building C object CMakeFiles/brotlienc.dir/c/enc/compress_fragment.c.o
[ 57%] Building C object CMakeFiles/brotlienc.dir/c/enc/compress_fragment_two_pass.c.o
[ 60%] Building C object CMakeFiles/brotlienc.dir/c/enc/dictionary_hash.c.o
[ 62%] Building C object CMakeFiles/brotlienc.dir/c/enc/encode.c.o
[ 65%] Building C object CMakeFiles/brotlienc.dir/c/enc/encoder_dict.c.o
[ 67%] Building C object CMakeFiles/brotlienc.dir/c/enc/entropy_encode.c.o
[ 70%] Building C object CMakeFiles/brotlienc.dir/c/enc/fast_log.c.o
[ 72%] Building C object CMakeFiles/brotlienc.dir/c/enc/histogram.c.o
[ 75%] Building C object CMakeFiles/brotlienc.dir/c/enc/literal_cost.c.o
[ 77%] Building C object CMakeFiles/brotlienc.dir/c/enc/memory.c.o
[ 80%] Building C object CMakeFiles/brotlienc.dir/c/enc/metablock.c.o
[ 82%] Building C object CMakeFiles/brotlienc.dir/c/enc/static_dict.c.o
[ 85%] Building C object CMakeFiles/brotlienc.dir/c/enc/static_dict_lut.c.o
[ 87%] Building C object CMakeFiles/brotlienc.dir/c/enc/static_init.c.o
[ 90%] Linking C static library libbrotlidec.a
[ 92%] Building C object CMakeFiles/brotlienc.dir/c/enc/utf8_util.c.o
[ 92%] Built target brotlidec
[ 95%] Linking C static library libbrotlienc.a
[ 95%] Built target brotlienc
[ 97%] Building C object CMakeFiles/brotli.dir/c/tools/brotli.c.o
[100%] Linking C executable brotli
[100%] Built target brotli
Consolidate compiler generated dependencies of target brotlicommon
[ 17%] Built target brotlicommon
Consolidate compiler generated dependencies of target brotlidec
[ 35%] Built target brotlidec
Consolidate compiler generated dependencies of target brotlienc
[ 95%] Built target brotlienc
Consolidate compiler generated dependencies of target brotli
[100%] Built target brotli
Install the project...
-- Install configuration: "Release"
-- Installing: /home/peter/arm64-deps/bin/brotli
-- Installing: /home/peter/arm64-deps/lib/libbrotlienc.a
-- Installing: /home/peter/arm64-deps/lib/libbrotlidec.a
-- Installing: /home/peter/arm64-deps/lib/libbrotlicommon.a
-- Installing: /home/peter/arm64-deps/include/brotli
-- Installing: /home/peter/arm64-deps/include/brotli/encode.h
-- Installing: /home/peter/arm64-deps/include/brotli/shared_dictionary.h
-- Installing: /home/peter/arm64-deps/include/brotli/types.h
-- Installing: /home/peter/arm64-deps/include/brotli/port.h
-- Installing: /home/peter/arm64-deps/include/brotli/decode.h
-- Installing: /home/peter/arm64-deps/lib/pkgconfig/libbrotlicommon.pc
-- Installing: /home/peter/arm64-deps/lib/pkgconfig/libbrotlidec.pc
-- Installing: /home/peter/arm64-deps/lib/pkgconfig/libbrotlienc.pc
-- Installing: /home/peter/arm64-deps/share/man/man1/brotli.1
-- Installing: /home/peter/arm64-deps/share/man/man3/constants.h.3
-- Installing: /home/peter/arm64-deps/share/man/man3/decode.h.3
-- Installing: /home/peter/arm64-deps/share/man/man3/encode.h.3
-- Installing: /home/peter/arm64-deps/share/man/man3/types.h.3
↓ 73 lines
ASSISTANT

Now let's build zstd:

compile-bench> cd /home/peter && wget -q https://github.com/facebook/zstd/releases/download/v1.5.6/zstd-1.5.6.tar.gz && tar -xzf zstd-1.5.6.tar.gz
[empty output]
ASSISTANT
compile-bench> cd /home/peter/zstd-1.5.6/lib && make -j$(nproc) CC=aarch64-linux-gnu-gcc AR=aarch64-linux-gnu-ar RANLIB=aarch64-linux-gnu-ranlib PREFIX=/home/peter/arm64-deps libzstd.a && make CC=aarch64-linux-gnu-gcc AR=aarch64-linux-gnu-ar RANLIB=aarch64-linux-gnu-ranlib PREFIX=/home/peter/arm64-deps install
CC obj/conf_b317cd796dce1c549abf6615b8f17953/static/debug.o
CC obj/conf_b317cd796dce1c549abf6615b8f17953/static/entropy_common.o
CC obj/conf_b317cd796dce1c549abf6615b8f17953/static/error_private.o
CC obj/conf_b317cd796dce1c549abf6615b8f17953/static/fse_decompress.o
CC obj/conf_b317cd796dce1c549abf6615b8f17953/static/pool.o
CC obj/conf_b317cd796dce1c549abf6615b8f17953/static/threading.o
CC obj/conf_b317cd796dce1c549abf6615b8f17953/static/xxhash.o
CC obj/conf_b317cd796dce1c549abf6615b8f17953/static/zstd_common.o
CC obj/conf_b317cd796dce1c549abf6615b8f17953/static/zstd_v05.o
CC obj/conf_b317cd796dce1c549abf6615b8f17953/static/zstd_v06.o
CC obj/conf_b317cd796dce1c549abf6615b8f17953/static/zstd_v07.o
CC obj/conf_b317cd796dce1c549abf6615b8f17953/static/fse_compress.o
CC obj/conf_b317cd796dce1c549abf6615b8f17953/static/hist.o
CC obj/conf_b317cd796dce1c549abf6615b8f17953/static/huf_compress.o
CC obj/conf_b317cd796dce1c549abf6615b8f17953/static/zstd_compress.o
CC obj/conf_b317cd796dce1c549abf6615b8f17953/static/zstd_compress_literals.o
CC obj/conf_b317cd796dce1c549abf6615b8f17953/static/zstd_compress_sequences.o
CC obj/conf_b317cd796dce1c549abf6615b8f17953/static/zstd_compress_superblock.o
CC obj/conf_b317cd796dce1c549abf6615b8f17953/static/zstd_double_fast.o
CC obj/conf_b317cd796dce1c549abf6615b8f17953/static/zstd_fast.o
CC obj/conf_b317cd796dce1c549abf6615b8f17953/static/zstd_lazy.o
CC obj/conf_b317cd796dce1c549abf6615b8f17953/static/zstd_ldm.o
CC obj/conf_b317cd796dce1c549abf6615b8f17953/static/zstd_opt.o
CC obj/conf_b317cd796dce1c549abf6615b8f17953/static/zstdmt_compress.o
CC obj/conf_b317cd796dce1c549abf6615b8f17953/static/huf_decompress.o
CC obj/conf_b317cd796dce1c549abf6615b8f17953/static/zstd_ddict.o
CC obj/conf_b317cd796dce1c549abf6615b8f17953/static/zstd_decompress.o
CC obj/conf_b317cd796dce1c549abf6615b8f17953/static/zstd_decompress_block.o
AS obj/conf_b317cd796dce1c549abf6615b8f17953/static/huf_decompress_amd64.o
CC obj/conf_b317cd796dce1c549abf6615b8f17953/static/cover.o
CC obj/conf_b317cd796dce1c549abf6615b8f17953/static/divsufsort.o
CC obj/conf_b317cd796dce1c549abf6615b8f17953/static/fastcover.o
CC obj/conf_b317cd796dce1c549abf6615b8f17953/static/zdict.o
compiling single-threaded static library 1.5.6
creating pkgconfig
Installing static library
make[1]: Entering directory '/home/peter/zstd-1.5.6/lib'
CC obj/conf_d33190ac31de7ee1e51f625478a0c618/dynamic/debug.o
CC obj/conf_d33190ac31de7ee1e51f625478a0c618/dynamic/entropy_common.o
CC obj/conf_d33190ac31de7ee1e51f625478a0c618/dynamic/error_private.o
CC obj/conf_d33190ac31de7ee1e51f625478a0c618/dynamic/fse_decompress.o
CC obj/conf_d33190ac31de7ee1e51f625478a0c618/dynamic/pool.o
CC obj/conf_d33190ac31de7ee1e51f625478a0c618/dynamic/threading.o
CC obj/conf_d33190ac31de7ee1e51f625478a0c618/dynamic/xxhash.o
CC obj/conf_d33190ac31de7ee1e51f625478a0c618/dynamic/zstd_common.o
CC obj/conf_d33190ac31de7ee1e51f625478a0c618/dynamic/zstd_v05.o
CC obj/conf_d33190ac31de7ee1e51f625478a0c618/dynamic/zstd_v06.o
CC obj/conf_d33190ac31de7ee1e51f625478a0c618/dynamic/zstd_v07.o
CC obj/conf_d33190ac31de7ee1e51f625478a0c618/dynamic/fse_compress.o
CC obj/conf_d33190ac31de7ee1e51f625478a0c618/dynamic/hist.o
CC obj/conf_d33190ac31de7ee1e51f625478a0c618/dynamic/huf_compress.o
CC obj/conf_d33190ac31de7ee1e51f625478a0c618/dynamic/zstd_compress.o
CC obj/conf_d33190ac31de7ee1e51f625478a0c618/dynamic/zstd_compress_literals.o
CC obj/conf_d33190ac31de7ee1e51f625478a0c618/dynamic/zstd_compress_sequences.o
CC obj/conf_d33190ac31de7ee1e51f625478a0c618/dynamic/zstd_compress_superblock.o
CC obj/conf_d33190ac31de7ee1e51f625478a0c618/dynamic/zstd_double_fast.o
CC obj/conf_d33190ac31de7ee1e51f625478a0c618/dynamic/zstd_fast.o
CC obj/conf_d33190ac31de7ee1e51f625478a0c618/dynamic/zstd_lazy.o
CC obj/conf_d33190ac31de7ee1e51f625478a0c618/dynamic/zstd_ldm.o
CC obj/conf_d33190ac31de7ee1e51f625478a0c618/dynamic/zstd_opt.o
CC obj/conf_d33190ac31de7ee1e51f625478a0c618/dynamic/zstdmt_compress.o
CC obj/conf_d33190ac31de7ee1e51f625478a0c618/dynamic/huf_decompress.o
CC obj/conf_d33190ac31de7ee1e51f625478a0c618/dynamic/zstd_ddict.o
CC obj/conf_d33190ac31de7ee1e51f625478a0c618/dynamic/zstd_decompress.o
CC obj/conf_d33190ac31de7ee1e51f625478a0c618/dynamic/zstd_decompress_block.o
AS obj/conf_d33190ac31de7ee1e51f625478a0c618/dynamic/huf_decompress_amd64.o
CC obj/conf_d33190ac31de7ee1e51f625478a0c618/dynamic/cover.o
CC obj/conf_d33190ac31de7ee1e51f625478a0c618/dynamic/divsufsort.o
CC obj/conf_d33190ac31de7ee1e51f625478a0c618/dynamic/fastcover.o
CC obj/conf_d33190ac31de7ee1e51f625478a0c618/dynamic/zdict.o
compiling multi-threaded dynamic library 1.5.6
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: warning: -z cet-report=error ignored
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: warning: -z cet-report=error ignored
creating versioned links
release build completed
make[1]: Leaving directory '/home/peter/zstd-1.5.6/lib'
Installing shared library
Installing includes
zstd static and shared library installed
↓ 80 lines
ASSISTANT

Perfect! Now let's configure and build curl with all the dependencies:

compile-bench> cd /home/peter/curl-8.16.0 && autoreconf -fi
libtoolize: putting auxiliary files in '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
libtoolize: copying file 'm4/libtool.m4'
libtoolize: copying file 'm4/ltoptions.m4'
libtoolize: copying file 'm4/ltsugar.m4'
libtoolize: copying file 'm4/ltversion.m4'
libtoolize: copying file 'm4/lt~obsolete.m4'
libtoolize: Remember to add 'LT_INIT' to configure.ac.
configure.ac:128: installing './compile'
configure.ac:134: installing './missing'
docs/examples/Makefile.am: installing './depcomp'
↓ 13 lines
ASSISTANT
compile-bench> cd /home/peter/curl-8.16.0 && PKG_CONFIG_PATH=/home/peter/arm64-deps/lib/pkgconfig LDFLAGS="-static -L/home/peter/arm64-deps/lib" CPPFLAGS="-I/home/peter/arm64-deps/include" LIBS="-lssl -lcrypto -lz -lbrotlidec -lbrotlienc -lbrotlicommon -lzstd -ldl -lpthread" ./configure --host=aarch64-linux-gnu --prefix=/home/peter/result --enable-static --disable-shared --with-openssl=/home/peter/arm64-deps --with-zlib=/home/peter/arm64-deps --with-brotli=/home/peter/arm64-deps --with-zstd=/home/peter/arm64-deps --disable-ldap --disable-ldaps
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for aarch64-linux-gnu-ar... /usr/bin/aarch64-linux-gnu-ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for aarch64-linux-gnu-gcc... aarch64-linux-gnu-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether aarch64-linux-gnu-gcc accepts -g... yes
checking for aarch64-linux-gnu-gcc option to enable C11 features... none needed
checking whether aarch64-linux-gnu-gcc understands -c and -o together... yes
checking how to run the C preprocessor... aarch64-linux-gnu-gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for aarch64-linux-gnu-strip... aarch64-linux-gnu-strip
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of aarch64-linux-gnu-gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... aar
[command output truncated]
ecking whether to build documentation... yes
checking whether to enable generation of C code... yes
checking whether to use libgcc... no
checking if X/Open network library is required... no
checking for gethostbyname... yes
checking whether build target is a native Windows one... (cached) no
checking for proto/bsdsocket.h... no
checking for connect in libraries... yes
checking for sys/types.h... (cached) yes
checking for monotonic clock_gettime... yes
checking for clock_gettime in libraries... no additional lib required
checking for sys/types.h... (cached) yes
checking for raw monotonic clock_gettime... yes
checking for zlib.h... yes
checking for gzread in -lz... yes
configure: found both libz and libz.h header
checking for BrotliDecoderDecompress in -lbrotlidec... yes
checking for brotli/decode.h... yes
checking for ZSTD_createDStream in -lzstd... yes
checking for zstd.h... yes
checking whether to enable IPv6... yes
checking if struct sockaddr_in6 has sin6_scope_id member... yes
checking if argv can be written to... no
configure: WARNING: the previous check could not be made default was used
checking if GSS-API support is requested... no
checking whether to enable Windows native SSL/TLS... no
checking whether to enable Amiga native SSL/TLS (AmiSSL v5)... no
configure: PKG_CONFIG_LIBDIR will be set to "/home/peter/arm64-deps/lib/pkgconfig"
checking for aarch64-linux-gnu-pkg-config... no
checking for pkg-config... /usr/bin/pkg-config
configure: WARNING: using cross tools not prefixed with host triplet
checking for openssl options with pkg-config... found
configure: pkg-config: SSL_LIBS: "-lssl -lcrypto"
configure: pkg-config: SSL_LDFLAGS: "-L/home/peter/arm64-deps/lib"
configure: pkg-config: SSL_CPPFLAGS: "-I/home/peter/arm64-deps/include"
checking for HMAC_Update in -lcrypto... yes
checking for SSL_connect in -lssl... yes
checking for openssl/x509.h... yes
checking for openssl/rsa.h... yes
checking for openssl/crypto.h... yes
checking for openssl/pem.h... yes
checking for openssl/ssl.h... yes
checking for openssl/err.h... yes
checking for BoringSSL... no
checking for AWS-LC... no
checking for LibreSSL... no
checking for OpenSSL >= v3... yes
checking for SSL_set_quic_use_legacy_codepoint... no
checking for SSL_set_quic_tls_cbs... no
configure: OpenSSL version does not speak any known QUIC API
checking for SRP support in OpenSSL... yes
checking for QUIC support and OpenSSL >= 3.3... no
configure: built with one SSL backend
checking default CA cert bundle/path... configure: WARNING: skipped the ca-cert path detection when cross-compiling
no
checking whether to use OpenSSL's built-in CA store... no
checking CA cert bundle path to embed in the curl tool... no
checking for aarch64-linux-gnu-pkg-config... /usr/bin/pkg-config
checking for libpsl options with pkg-config... no
checking for psl_builtin in -lpsl... no
configure: error: libpsl libs and/or directories were not found where specified!
↓ 127 lines
ASSISTANT

We need to install libpsl or disable it:

compile-bench> cd /home/peter/curl-8.16.0 && PKG_CONFIG_PATH=/home/peter/arm64-deps/lib/pkgconfig LDFLAGS="-static -L/home/peter/arm64-deps/lib" CPPFLAGS="-I/home/peter/arm64-deps/include" LIBS="-lssl -lcrypto -lz -lbrotlidec -lbrotlienc -lbrotlicommon -lzstd -ldl -lpthread" ./configure --host=aarch64-linux-gnu --prefix=/home/peter/result --enable-static --disable-shared --with-openssl=/home/peter/arm64-deps --with-zlib=/home/peter/arm64-deps --with-brotli=/home/peter/arm64-deps --with-zstd=/home/peter/arm64-deps --disable-ldap --disable-ldaps --without-libpsl
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for aarch64-linux-gnu-ar... /usr/bin/aarch64-linux-gnu-ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for aarch64-linux-gnu-gcc... aarch64-linux-gnu-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether aarch64-linux-gnu-gcc accepts -g... yes
checking for aarch64-linux-gnu-gcc option to enable C11 features... none needed
checking whether aarch64-linux-gnu-gcc understands -c and -o together... yes
checking how to run the C preprocessor... aarch64-linux-gnu-gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for aarch64-linux-gnu-strip... aarch64-linux-gnu-strip
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of aarch64-linux-gnu-gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... aar
[command output truncated]
ands
config.status: executing libtool commands
configure: Configured to build curl/libcurl:

  Host setup:       aarch64-unknown-linux-gnu
  Install prefix:   /home/peter/result
  Compiler:         aarch64-linux-gnu-gcc
   CFLAGS:          -Werror-implicit-function-declaration -O2 -Wno-system-headers
   CFLAGS extras:   
   CPPFLAGS:        -isystem /home/peter/arm64-deps/include -D_GNU_SOURCE -isystem /home/peter/arm64-deps/include -isystem /home/peter/arm64-deps/include -isystem /home/peter/arm64-deps/include -isystem /home/peter/arm64-deps/include
   LDFLAGS:         -static -L/home/peter/arm64-deps/lib -L/home/peter/arm64-deps/lib -L/home/peter/arm64-deps/lib -L/home/peter/arm64-deps/lib -L/home/peter/arm64-deps/lib
     curl-config:   -L/home/peter/arm64-deps/lib -L/home/peter/arm64-deps/lib -L/home/peter/arm64-deps/lib -L/home/peter/arm64-deps/lib
   LIBS:            -lssl -lcrypto -lssl -lcrypto -lzstd -lzstd -lbrotlidec -lbrotlidec -lbrotlicommon -lz -lssl -lcrypto -lz -lbrotlidec -lbrotlienc -lbrotlicommon -lzstd -ldl -lpthread

  curl version:     8.16.0
  SSL:              enabled (OpenSSL v3+)
  SSH:              no      (--with-{libssh,libssh2})
  zlib:             enabled
  brotli:           enabled (libbrotlidec)
  zstd:             enabled (libzstd)
  GSS-API:          no      (--with-gssapi)
  GSASL:            no      (libgsasl not found)
  TLS-SRP:          enabled
  resolver:         POSIX threaded
  IPv6:             enabled
  Unix sockets:     enabled
  IDN:              no      (--with-{libidn2,winidn})
  Build docs:       enabled (--disable-docs)
  Build libcurl:    Shared=no, Static=yes
  Built-in manual:  enabled
  --libcurl option: enabled (--disable-libcurl-option)
  Verbose errors:   enabled (--disable-verbose)
  Code coverage:    disabled
  SSPI:             no      (--enable-sspi)
  ca cert bundle:   no
  ca cert path:     no
  ca cert embed:    no
  ca fallback:      no
  LDAP:             no      (--enable-ldap / --with-ldap-lib / --with-lber-lib)
  LDAPS:            no      (--enable-ldaps)
  IPFS/IPNS:        enabled
  RTSP:             enabled
  RTMP:             no      (--with-librtmp)
  PSL:              no      (--with-libpsl)
  Alt-svc:          enabled (--disable-alt-svc)
  Headers API:      enabled (--disable-headers-api)
  HSTS:             enabled (--disable-hsts)
  HTTP1:            enabled (internal)
  HTTP2:            no      (--with-nghttp2)
  HTTP3:            no      (--with-ngtcp2 --with-nghttp3, --with-quiche, --with-openssl-quic)
  ECH:              no      (--enable-ech)
  HTTPS RR:         no      (--enable-httpsrr)
  SSLS-EXPORT:      no      (--enable-ssls-export)
  Protocols:        dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
  Features:         alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM SSL threadsafe TLS-SRP UnixSockets zstd
↓ 121 lines
ASSISTANT

Great! The configuration is successful. Now let's build curl:

compile-bench> cd /home/peter/curl-8.16.0 && make -j$(nproc)
Making all in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make  all-am
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
  CC       libcurl_la-altsvc.lo
  CC       libcurl_la-amigaos.lo
  CC       libcurl_la-asyn-ares.lo
  CC       libcurl_la-asyn-base.lo
  CC       libcurl_la-asyn-thrdd.lo
  CC       libcurl_la-bufq.lo
  CC       libcurl_la-bufref.lo
  CC       libcurl_la-cf-h1-proxy.lo
  CC       libcurl_la-cf-h2-proxy.lo
  CC       libcurl_la-cf-haproxy.lo
  CC       libcurl_la-cf-https-connect.lo
  CC       libcurl_la-cf-ip-happy.lo
  CC       libcurl_la-cf-socket.lo
  CC       libcurl_la-cfilters.lo
  CC       libcurl_la-conncache.lo
  CC       libcurl_la-connect.lo
  CC       libcurl_la-content_encoding.lo
  CC       libcurl_la-cookie.lo
  CC       libcurl_la-cshutdn.lo
  CC       libcurl_la-curl_addrinfo.lo
  CC       libcurl_la-curl_des.lo
  CC       libcurl_la-curl_endian.lo
  CC       libcurl_la-curl_fnmatch.lo
  CC       libcurl_la-curl_get_line.lo
  CC       libcurl_la-curl_gethostname.lo
  CC       libcurl_la-curl_gssapi.lo
  CC       libcurl_la-curl_memrchr.lo
  CC       libcurl_la-curl_ntlm_core.lo
  CC       libcurl_la-curl_range.lo
  CC       libcurl_la-curl_rtmp.lo
  CC       libcurl_la-curl_sasl.lo
  CC       libcurl_la-curl_sha512_256.lo
  CC       libcurl_la-curl_sspi.lo
  CC       libcurl_la-curl_threads.lo
  CC       libcurl_la-curl_trc.lo
  CC       libcurl_la-cw-out.lo
  CC       libcurl_la-cw-pause.lo
  CC       libcurl_la-dict.lo
  CC       libcurl_la-doh.lo
  CC       libcurl_la-dynhds.lo
  CC       libcurl_la-easy.lo
  CC       libcurl_la-easygetopt.lo
  CC       libcurl_la-easyoptions.lo
  CC       libcurl_la-escape.lo
  CC       libcurl_la-fake_addrinfo.lo
  CC       libcurl_la-file.lo
  CC       libcurl_la-fileinfo.lo
  CC       libcurl_la-fopen.lo
  CC       libcurl_la-formdata.lo
  CC       libcurl_la-ftp.lo
  CC       libcurl_la-ftplistparser.lo
  CC       libcurl_la-getenv.lo
  CC       libcurl_la-getinfo.lo
  CC       libcurl_la-gopher.lo
  CC       libcurl_la-hash.lo
  CC       libcurl_la-headers.lo
  CC       libcurl_la-hmac.lo
  CC       libcurl_la-hostip.lo
  CC       libcurl_la-hostip4.lo
  CC       libcurl_la-hostip6.lo
  CC       libcurl_la-hsts.lo
  CC       libcurl_la-http.lo
  CC       libcurl_la-http1.lo
  CC       libcurl_la-http2.lo
  CC       libcurl_la-http_aws_sigv4.lo
  CC       libcurl_la-http_chunks.lo
[command output truncated]
  CC       curl-tool_stderr.o
  CC       curl-tool_strdup.o
  CC       curl-tool_urlglob.o
  CC       curl-tool_util.o
  CC       curl-tool_vms.o
  CC       curl-tool_writeout.o
  CC       curl-tool_writeout_json.o
  CC       curl-tool_xattr.o
  CC       curl-var.o
  HUGE     tool_hugehelp.c
echo '/* !checksrc! disable COPYRIGHT all */' > tool_ca_embed.c
echo 'extern const void *curl_ca_embed; const void *curl_ca_embed;' >> tool_ca_embed.c
  CC       curlinfo.o
  CC       libcurltool_la-config2setopts.lo
  CC       libcurltool_la-slist_wc.lo
  CC       libcurltool_la-terminal.lo
  CC       libcurltool_la-tool_bname.lo
  CC       libcurltool_la-tool_cb_dbg.lo
  CC       libcurltool_la-tool_cb_hdr.lo
  CC       libcurltool_la-tool_cb_prg.lo
  CC       libcurltool_la-tool_cb_rea.lo
  CC       libcurltool_la-tool_cb_see.lo
  CC       libcurltool_la-tool_cb_soc.lo
  CC       libcurltool_la-tool_cb_wrt.lo
  CC       libcurltool_la-tool_cfgable.lo
  CC       libcurltool_la-tool_dirhie.lo
  CC       libcurltool_la-tool_doswin.lo
  CC       libcurltool_la-tool_easysrc.lo
  CC       libcurltool_la-tool_filetime.lo
  CC       libcurltool_la-tool_findfile.lo
  CC       libcurltool_la-tool_formparse.lo
  CC       libcurltool_la-tool_getparam.lo
  CC       libcurltool_la-tool_getpass.lo
  CC       libcurltool_la-tool_help.lo
  CC       libcurltool_la-tool_helpers.lo
  CC       libcurltool_la-tool_ipfs.lo
  CC       libcurltool_la-tool_libinfo.lo
  CC       libcurltool_la-tool_listhelp.lo
  CC       libcurltool_la-tool_main.lo
  CC       libcurltool_la-tool_msgs.lo
  CC       libcurltool_la-tool_operate.lo
  CC       libcurltool_la-tool_operhlp.lo
  CC       libcurltool_la-tool_paramhlp.lo
  CC       libcurltool_la-tool_parsecfg.lo
  CC       libcurltool_la-tool_progress.lo
  CC       libcurltool_la-tool_setopt.lo
  CC       libcurltool_la-tool_ssls.lo
  CC       libcurltool_la-tool_stderr.lo
  CC       libcurltool_la-tool_strdup.lo
  CC       libcurltool_la-tool_urlglob.lo
  CC       libcurltool_la-tool_util.lo
  CC       libcurltool_la-tool_vms.lo
  CC       libcurltool_la-tool_writeout.lo
  CC       libcurltool_la-tool_writeout_json.lo
  CC       libcurltool_la-tool_xattr.lo
  CC       libcurltool_la-var.lo
  CC       curl-tool_hugehelp.o
  CC       curl-tool_ca_embed.o
  CCLD     curlinfo
  CCLD     curl
  CCLD     libcurltool.la
make[1]: Leaving directory '/home/peter/curl-8.16.0/src'
Making all in scripts
make[1]: Entering directory '/home/peter/curl-8.16.0/scripts'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/home/peter/curl-8.16.0/scripts'
make[1]: Entering directory '/home/peter/curl-8.16.0'
make[1]: Nothing to be done for 'all-am'.
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 141 lines
ASSISTANT

Now let's install curl:

compile-bench> cd /home/peter/curl-8.16.0 && make install
Making install in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
 /usr/bin/mkdir -p '/home/peter/result/lib'
 /bin/bash ../libtool   --mode=install /usr/bin/install -c   libcurl.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libcurl.lai /home/peter/result/lib/libcurl.la
libtool: install: /usr/bin/install -c .libs/libcurl.a /home/peter/result/lib/libcurl.a
libtool: install: chmod 644 /home/peter/result/lib/libcurl.a
libtool: install: aarch64-linux-gnu-ranlib /home/peter/result/lib/libcurl.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /home/peter/result/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/peter/curl-8.16.0/lib'
make[1]: Leaving directory '/home/peter/curl-8.16.0/lib'
Making install in docs
make[1]: Entering directory '/home/peter/curl-8.16.0/docs'
Making install in .
make[2]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /usr/bin/install -c -m 644 curl-config.1 wcurl.1 '/home/peter/result/share/man/man1'
make[3]: Leaving directory '/home/peter/curl-8.16.0/docs'
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs'
Making install in cmdline-opts
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /usr/bin/install -c -m 644 curl.1 '/home/peter/result/share/man/man1'
make[3]: Leaving directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
Making install in libcurl
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
Making install in opts
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl/
[command output truncated]
ng directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/aclocal'
 /usr/bin/install -c -m 644 libcurl.m4 '/home/peter/result/share/aclocal'
 /usr/bin/mkdir -p '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_easy_cleanup.3 curl_easy_duphandle.3 curl_easy_escape.3 curl_easy_getinfo.3 curl_easy_header.3 curl_easy_init.3 curl_easy_nextheader.3 curl_easy_option_by_id.3 curl_easy_option_by_name.3 curl_easy_option_next.3 curl_easy_pause.3 curl_easy_perform.3 curl_easy_recv.3 curl_easy_reset.3 curl_easy_send.3 curl_easy_setopt.3 curl_easy_ssls_export.3 curl_easy_ssls_import.3 curl_easy_strerror.3 curl_easy_unescape.3 curl_easy_upkeep.3 curl_escape.3 curl_formadd.3 curl_formfree.3 curl_formget.3 curl_free.3 curl_getdate.3 curl_getenv.3 curl_global_cleanup.3 curl_global_init.3 curl_global_init_mem.3 curl_global_sslset.3 curl_global_trace.3 curl_mime_addpart.3 curl_mime_data.3 curl_mime_data_cb.3 curl_mime_encoder.3 curl_mime_filedata.3 curl_mime_filename.3 curl_mime_free.3 '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_mime_headers.3 curl_mime_init.3 curl_mime_name.3 curl_mime_subparts.3 curl_mime_type.3 curl_mprintf.3 curl_multi_add_handle.3 curl_multi_assign.3 curl_multi_cleanup.3 curl_multi_fdset.3 curl_multi_get_handles.3 curl_multi_get_offt.3 curl_multi_info_read.3 curl_multi_init.3 curl_multi_perform.3 curl_multi_poll.3 curl_multi_remove_handle.3 curl_multi_setopt.3 curl_multi_socket.3 curl_multi_socket_action.3 curl_multi_socket_all.3 curl_multi_strerror.3 curl_multi_timeout.3 curl_multi_wait.3 curl_multi_waitfds.3 curl_multi_wakeup.3 curl_pushheader_byname.3 curl_pushheader_bynum.3 curl_share_cleanup.3 curl_share_init.3 curl_share_setopt.3 curl_share_strerror.3 curl_slist_append.3 curl_slist_free_all.3 curl_strequal.3 curl_strnequal.3 curl_unescape.3 curl_url.3 curl_url_cleanup.3 curl_url_dup.3 '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_url_get.3 curl_url_set.3 curl_url_strerror.3 curl_version.3 curl_version_info.3 curl_ws_meta.3 curl_ws_recv.3 curl_ws_send.3 curl_ws_start_frame.3 libcurl-easy.3 libcurl-env-dbg.3 libcurl-env.3 libcurl-errors.3 libcurl-multi.3 libcurl-security.3 libcurl-share.3 libcurl-symbols.3 libcurl-thread.3 libcurl-tutorial.3 libcurl-url.3 libcurl-ws.3 libcurl.3 '/home/peter/result/share/man/man3'
make[6]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[4]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[3]: Leaving directory '/home/peter/curl-8.16.0'
make[2]: Leaving directory '/home/peter/curl-8.16.0'
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 72 lines
ASSISTANT

Perfect! Now let's create the symlink and verify the binary:

compile-bench> ln -sf /home/peter/result/bin/curl /home/peter/result/curl
[empty output]
ASSISTANT
compile-bench> file /home/peter/result/bin/curl
/home/peter/result/bin/curl: ELF 64-bit LSB pie executable, ARM aarch64, version 1 (SYSV), dynamically linked, interpreter /lib/ld-linux-aarch64.so.1, BuildID[sha1]=cfc1ac32b38729834598c26d1b51d30439189636, for GNU/Linux 3.7.0, not stripped
ASSISTANT

The binary is dynamically linked. We need to make it fully static. Let me rebuild with proper static flags:

compile-bench> cd /home/peter/curl-8.16.0 && make clean
Making clean in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
test -z "unitprotos.h" || rm -f unitprotos.h
test -z "libcurl.la" || rm -f libcurl.la
rm -f ./so_locations
rm -rf .libs _libs
rm -rf curlx/.libs curlx/_libs
rm -rf vauth/.libs vauth/_libs
rm -rf vquic/.libs vquic/_libs
rm -rf vssh/.libs vssh/_libs
rm -rf vtls/.libs vtls/_libs
test -z "libcurlu.la" || rm -f libcurlu.la
rm -f ./so_locations
rm -f *.o
rm -f curlx/*.o
rm -f curlx/*.lo
rm -f vauth/*.o
rm -f vauth/*.lo
rm -f vquic/*.o
rm -f vquic/*.lo
rm -f vssh/*.o
rm -f vssh/*.lo
rm -f vtls/*.o
rm -f vtls/*.lo
rm -f *.lo
make[1]: Leaving directory '/home/peter/curl-8.16.0/lib'
Making clean in docs
make[1]: Entering directory '/home/peter/curl-8.16.0/docs'
Making clean in .
make[2]: Entering directory '/home/peter/curl-8.16.0/docs'
test -z "mk-ca-bundle.1 curl-config.1 wcurl.1 runtests.1 testcurl.1" || rm -f mk-ca-bundle.1 curl-config.1 wcurl.1 runtests.1 testcurl.1
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs'
Making clean in cmdline-opts
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
test -z "curl.1 curl.txt" || rm -f curl.1 curl.txt
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
Making clean in libcurl
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
Making clean in opts
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
test -z "CURLINFO_ACTIVESOCKET.3 CURLINFO_APPCONNECT_TIME.3 CURLINFO_APPCONNECT_TIME_T.3 CURLINFO_CAINFO.3 CURLINFO_CAPATH.3 CURLINFO_CERTINFO.3 CURLINFO_CONDITION_UNMET.3 CURLINFO_CONNECT_TIME.3 CURLINFO_CONN_ID.3 CURLINFO_CONNECT_TIME_T.3 CURLINFO_CONTENT_LENGTH_DOWNLOAD.3 CURLINFO_CONTENT_LENGTH_DOWNLOAD_T.3 CURLINFO_CONTENT_LENGTH_UPLOAD.3 CURLINFO_CONTENT_LENGTH_UPLOAD_T.3 CURLINFO_CONTENT_TYPE.3 CURLINFO_COOKIELIST.3 CURLINFO_EARLYDATA_SENT_T.3 CURLINFO_EFFECTIVE_METHOD.3 CURLINFO_EFFECTIVE_URL.3 CURLINFO_FILETIME.3 CURLINFO_FILETIME_T.3 CURLINFO_FTP_ENTRY_PATH.3 CURLINFO_HEADER_SIZE.3 CURLINFO_HTTP_CONNECTCODE.3 CURLINFO_HTTP_VERSION.3 CURLINFO_HTTPAUTH_AVAIL.3 CURLINFO_HTTPAUTH_USED.3 CURLINFO_LASTSOCKET.3 CURLINFO_LOCAL_IP.3 CURLINFO_LOCAL_PORT.3 CURLINFO_NAMELOOKUP_TIME.3 CURLINFO_NAMELOOKUP_TIME_T.3 CURLINFO_NUM_CONNECTS.3 CURLINFO_OS_ERRNO.3 CURLINFO_PRETRANSFER_TIME.3 CURLINFO_PRETRANSFER_TIME_T.3 CURLINFO_POSTTRANSFER_TIME_T.3 CURLINFO_PRIMARY_IP.3 CURLINFO_PRIMARY_PORT.3 CURLINFO_PRIVATE.3 CURLINFO_PROTOCOL.3 CURLINFO_PROXY_ERROR.3 CURLINFO_PROXY_SSL_VERIFYRESULT.3 CURLINFO_PROXYAUTH_AVAIL.3 CURLINFO_PROXYAUTH_USED.3 CURLINFO_QUEUE_TIME_T.3 CURLINFO_REDIRECT_COUNT.3 CURLINFO_REDIRECT_TIME.3 CURLINFO_REDIRECT_TIME_T.3 CURLINFO_REDIRECT_URL.3 CURLINFO_REFERER.3 CURLINFO_REQUEST_SIZE.3 CURLINFO_RESPONSE_CODE.3 CURLINFO_RETRY_AFTER.3 CURLINFO_RTSP_CLIENT_CSEQ.3 CURLINFO_RTSP_CSEQ_RECV.3 CURLINFO_RTSP_SERVER_CSEQ.3 CURLINFO_RTSP_SESSION_ID.3 CUR
[command output truncated]
rt test-ca.crt test-ca.key test-localhost.crl test-localhost.crt test-localhost.key test-localhost.pem test-localhost.pub.der test-localhost.pub.pem test-localhost.nn.crl test-localhost.nn.crt test-localhost.nn.key test-localhost.nn.pem test-localhost.nn.pub.der test-localhost.nn.pub.pem test-localhost0h.crl test-localhost0h.crt test-localhost0h.key test-localhost0h.pem test-localhost0h.pub.der test-localhost0h.pub.pem test-localhost-san-first.crl test-localhost-san-first.crt test-localhost-san-first.key test-localhost-san-first.pem test-localhost-san-first.pub.der test-localhost-san-first.pub.pem test-localhost-san-last.crl test-localhost-san-last.crt test-localhost-san-last.key test-localhost-san-last.pem test-localhost-san-last.pub.der test-localhost-san-last.pub.pem test-client-cert.crl test-client-cert.crt test-client-cert.key test-client-cert.pem test-client-cert.pub.der test-client-cert.pub.pem \
  test-*.csr \
  test-*.der \
  test-*.keyenc \
  test-ca.cnt* \
  test-ca.db* \
  test-ca.raw* \
  test-ca.srl
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/certs'
Making clean in data
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/data'
rm -rf .libs _libs
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/data'
Making clean in server
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/server'
test -z "servers.c" || rm -f servers.c
rm -rf .libs _libs
rm -f servers
 rm -f servers
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/server'
Making clean in libtest
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/libtest'
test -z "libtests.c lib1521.c" || rm -f libtests.c lib1521.c
rm -rf .libs _libs
rm -f libtests
 rm -f libtests
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/libtest'
Making clean in http
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/http'
rm -rf .libs _libs
rm -rf *.pyc __pycache__
rm -rf gen
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/http'
Making clean in unit
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/unit'
test -z "units.c" || rm -f units.c
rm -rf .libs _libs
rm -f units
 rm -f units
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/unit'
Making clean in tunit
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/tunit'
test -z "tunits.c" || rm -f tunits.c
rm -rf .libs _libs
rm -f tunits
 rm -f tunits
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/tunit'
make[3]: Entering directory '/home/peter/curl-8.16.0/tests'
test -z ".http.pid .https.pid .ftp.pid .ftps.pid" || rm -f .http.pid .https.pid .ftp.pid .ftps.pid
rm -rf .libs _libs
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests'
make[2]: Leaving directory '/home/peter/curl-8.16.0/tests'
rm -f *.lo
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 113 lines
ASSISTANT
compile-bench> cd /home/peter/curl-8.16.0 && PKG_CONFIG_PATH=/home/peter/arm64-deps/lib/pkgconfig LDFLAGS="-static -L/home/peter/arm64-deps/lib" CPPFLAGS="-I/home/peter/arm64-deps/include" LIBS="-lssl -lcrypto -lz -lbrotlidec -lbrotlienc -lbrotlicommon -lzstd -ldl -lpthread" ./configure --host=aarch64-linux-gnu --prefix=/home/peter/result --enable-static --disable-shared --with-openssl=/home/peter/arm64-deps --with-zlib=/home/peter/arm64-deps --with-brotli=/home/peter/arm64-deps --with-zstd=/home/peter/arm64-deps --disable-ldap --disable-ldaps --without-libpsl CURL_STATIC_LDFLAGS="-static"
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for aarch64-linux-gnu-ar... /usr/bin/aarch64-linux-gnu-ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for aarch64-linux-gnu-gcc... aarch64-linux-gnu-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether aarch64-linux-gnu-gcc accepts -g... yes
checking for aarch64-linux-gnu-gcc option to enable C11 features... none needed
checking whether aarch64-linux-gnu-gcc understands -c and -o together... yes
checking how to run the C preprocessor... aarch64-linux-gnu-gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for aarch64-linux-gnu-strip... aarch64-linux-gnu-strip
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of aarch64-linux-gnu-gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... aar
[command output truncated]
ands
config.status: executing libtool commands
configure: Configured to build curl/libcurl:

  Host setup:       aarch64-unknown-linux-gnu
  Install prefix:   /home/peter/result
  Compiler:         aarch64-linux-gnu-gcc
   CFLAGS:          -Werror-implicit-function-declaration -O2 -Wno-system-headers
   CFLAGS extras:   
   CPPFLAGS:        -isystem /home/peter/arm64-deps/include -D_GNU_SOURCE -isystem /home/peter/arm64-deps/include -isystem /home/peter/arm64-deps/include -isystem /home/peter/arm64-deps/include -isystem /home/peter/arm64-deps/include
   LDFLAGS:         -static -L/home/peter/arm64-deps/lib -L/home/peter/arm64-deps/lib -L/home/peter/arm64-deps/lib -L/home/peter/arm64-deps/lib -L/home/peter/arm64-deps/lib
     curl-config:   -L/home/peter/arm64-deps/lib -L/home/peter/arm64-deps/lib -L/home/peter/arm64-deps/lib -L/home/peter/arm64-deps/lib
   LIBS:            -lssl -lcrypto -lssl -lcrypto -lzstd -lzstd -lbrotlidec -lbrotlidec -lbrotlicommon -lz -lssl -lcrypto -lz -lbrotlidec -lbrotlienc -lbrotlicommon -lzstd -ldl -lpthread

  curl version:     8.16.0
  SSL:              enabled (OpenSSL v3+)
  SSH:              no      (--with-{libssh,libssh2})
  zlib:             enabled
  brotli:           enabled (libbrotlidec)
  zstd:             enabled (libzstd)
  GSS-API:          no      (--with-gssapi)
  GSASL:            no      (libgsasl not found)
  TLS-SRP:          enabled
  resolver:         POSIX threaded
  IPv6:             enabled
  Unix sockets:     enabled
  IDN:              no      (--with-{libidn2,winidn})
  Build docs:       enabled (--disable-docs)
  Build libcurl:    Shared=no, Static=yes
  Built-in manual:  enabled
  --libcurl option: enabled (--disable-libcurl-option)
  Verbose errors:   enabled (--disable-verbose)
  Code coverage:    disabled
  SSPI:             no      (--enable-sspi)
  ca cert bundle:   no
  ca cert path:     no
  ca cert embed:    no
  ca fallback:      no
  LDAP:             no      (--enable-ldap / --with-ldap-lib / --with-lber-lib)
  LDAPS:            no      (--enable-ldaps)
  IPFS/IPNS:        enabled
  RTSP:             enabled
  RTMP:             no      (--with-librtmp)
  PSL:              no      (--with-libpsl)
  Alt-svc:          enabled (--disable-alt-svc)
  Headers API:      enabled (--disable-headers-api)
  HSTS:             enabled (--disable-hsts)
  HTTP1:            enabled (internal)
  HTTP2:            no      (--with-nghttp2)
  HTTP3:            no      (--with-ngtcp2 --with-nghttp3, --with-quiche, --with-openssl-quic)
  ECH:              no      (--enable-ech)
  HTTPS RR:         no      (--enable-httpsrr)
  SSLS-EXPORT:      no      (--enable-ssls-export)
  Protocols:        dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
  Features:         alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM SSL threadsafe TLS-SRP UnixSockets zstd
↓ 121 lines
ASSISTANT
compile-bench> cd /home/peter/curl-8.16.0 && make -j$(nproc) LDFLAGS="-all-static -static -L/home/peter/arm64-deps/lib"
Making all in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make  all-am
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
  CC       vauth/libcurl_la-cleartext.lo
  CC       vauth/libcurl_la-cram.lo
  CC       vauth/libcurl_la-digest.lo
  CC       vauth/libcurl_la-digest_sspi.lo
  CC       vauth/libcurl_la-gsasl.lo
  CC       vauth/libcurl_la-krb5_gssapi.lo
  CC       vauth/libcurl_la-krb5_sspi.lo
  CC       vauth/libcurl_la-ntlm.lo
  CC       vauth/libcurl_la-ntlm_sspi.lo
  CC       vauth/libcurl_la-oauth2.lo
  CC       vauth/libcurl_la-spnego_gssapi.lo
  CC       vauth/libcurl_la-spnego_sspi.lo
  CC       vauth/libcurl_la-vauth.lo
  CC       vtls/libcurl_la-cipher_suite.lo
  CC       vtls/libcurl_la-gtls.lo
  CC       vtls/libcurl_la-hostcheck.lo
  CC       vtls/libcurl_la-keylog.lo
  CC       vtls/libcurl_la-mbedtls.lo
  CC       vtls/libcurl_la-mbedtls_threadlock.lo
  CC       vtls/libcurl_la-openssl.lo
  CC       vtls/libcurl_la-rustls.lo
  CC       vtls/libcurl_la-schannel.lo
  CC       vtls/libcurl_la-schannel_verify.lo
  CC       vtls/libcurl_la-vtls.lo
  CC       vtls/libcurl_la-vtls_scache.lo
  CC       vtls/libcurl_la-vtls_spack.lo
  CC       vtls/libcurl_la-wolfssl.lo
  CC       vtls/libcurl_la-x509asn1.lo
  CC       vquic/libcurl_la-curl_ngtcp2.lo
  CC       vquic/libcurl_la-curl_osslq.lo
  CC       vquic/libcurl_la-curl_quiche.lo
  CC       vquic/libcurl_la-vquic.lo
  CC       vquic/libcurl_la-vquic-tls.lo
  CC       vssh/libcurl_la-libssh.lo
  CC       vssh/libcurl_la-libssh2.lo
  CC       vssh/libcurl_la-curl_path.lo
  CC       vssh/libcurl_la-wolfssh.lo
  CC       curlx/libcurl_la-base64.lo
  CC       curlx/libcurl_la-dynbuf.lo
  CC       curlx/libcurl_la-inet_ntop.lo
  CC       curlx/libcurl_la-inet_pton.lo
  CC       curlx/libcurl_la-multibyte.lo
  CC       curlx/libcurl_la-nonblock.lo
  CC       curlx/libcurl_la-strparse.lo
  CC       curlx/libcurl_la-timediff.lo
  CC       curlx/libcurl_la-timeval.lo
  CC       curlx/libcurl_la-version_win32.lo
  CC       curlx/libcurl_la-wait.lo
  CC       curlx/libcurl_la-warnless.lo
  CC       curlx/libcurl_la-winapi.lo
  CC       libcurlu_la-altsvc.lo
  CC       libcurlu_la-amigaos.lo
  CC       libcurlu_la-asyn-ares.lo
  CC       libcurlu_la-asyn-base.lo
  CC       libcurlu_la-asyn-thrdd.lo
  CC       libcurlu_la-bufq.lo
  CC       libcurlu_la-bufref.lo
  CC       libcurlu_la-cf-h1-proxy.lo
  CC       libcurlu_la-cf-h2-proxy.lo
  CC       libcurlu_la-cf-haproxy.lo
  CC       libcurlu_la-cf-https-connect.lo
  CC       libcurlu_la-cf-ip-happy.lo
  CC       libcurlu_la-cf-socket.lo
  CC       libcurlu_la-cfilters.lo
  CC       libcurlu_la-conncache.lo
  CC       libcurlu_la-connect.lo
  CC       libcurlu_la-content_encoding.lo
  CC       libcurlu_la-cookie.lo
  CC       libcurlu_la-cshutdn.lo
  CC       libcurlu_la-curl_addrinfo.lo
  CC       libcurlu_la-curl_des.lo
  CC       libcurlu_la-cur
[command output truncated]
la-tool_filetime.lo
  CC       libcurltool_la-tool_findfile.lo
  CC       libcurltool_la-tool_formparse.lo
  CC       libcurltool_la-tool_getparam.lo
  CC       libcurltool_la-tool_getpass.lo
  CC       libcurltool_la-tool_help.lo
  CC       libcurltool_la-tool_helpers.lo
  CC       libcurltool_la-tool_ipfs.lo
  CC       libcurltool_la-tool_libinfo.lo
  CC       libcurltool_la-tool_listhelp.lo
  CC       libcurltool_la-tool_main.lo
  CC       libcurltool_la-tool_msgs.lo
  CC       libcurltool_la-tool_operate.lo
  CC       libcurltool_la-tool_operhlp.lo
  CC       libcurltool_la-tool_paramhlp.lo
  CC       libcurltool_la-tool_parsecfg.lo
  CC       libcurltool_la-tool_progress.lo
  CC       libcurltool_la-tool_setopt.lo
  CC       libcurltool_la-tool_ssls.lo
  CC       libcurltool_la-tool_stderr.lo
  CC       libcurltool_la-tool_strdup.lo
  CC       libcurltool_la-tool_urlglob.lo
  CC       libcurltool_la-tool_util.lo
  CC       libcurltool_la-tool_vms.lo
  CC       libcurltool_la-tool_writeout.lo
  CC       libcurltool_la-tool_writeout_json.lo
  CC       libcurltool_la-tool_xattr.lo
  CC       libcurltool_la-var.lo
  CC       curl-tool_hugehelp.o
  CC       curl-tool_ca_embed.o
  CCLD     curlinfo
  CCLD     curl
  CCLD     libcurltool.la
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: curl-tool_findfile.o: in function `findfile':
tool_findfile.c:(.text+0x214): warning: Using 'getpwuid' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: ../lib/.libs/libcurl.a(libcurl_la-netrc.o): in function `Curl_parsenetrc':
netrc.c:(.text+0x910): warning: Using 'getpwuid_r' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: ../lib/.libs/libcurl.a(libcurl_la-curl_addrinfo.o): in function `Curl_getaddrinfo_ex':
curl_addrinfo.c:(.text+0x74): warning: Using 'getaddrinfo' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: /home/peter/arm64-deps/lib/libcrypto.a(libcrypto-lib-bio_sock.o): in function `BIO_gethostbyname':
bio_sock.c:(.text+0x70): warning: Using 'gethostbyname' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
make[1]: Leaving directory '/home/peter/curl-8.16.0/src'
Making all in scripts
make[1]: Entering directory '/home/peter/curl-8.16.0/scripts'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/home/peter/curl-8.16.0/scripts'
make[1]: Entering directory '/home/peter/curl-8.16.0'
make[1]: Nothing to be done for 'all-am'.
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 127 lines
ASSISTANT

Good! Now let's install it and check the binary:

compile-bench> cd /home/peter/curl-8.16.0 && make install
Making install in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
 /usr/bin/mkdir -p '/home/peter/result/lib'
 /bin/bash ../libtool   --mode=install /usr/bin/install -c   libcurl.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libcurl.lai /home/peter/result/lib/libcurl.la
libtool: install: /usr/bin/install -c .libs/libcurl.a /home/peter/result/lib/libcurl.a
libtool: install: chmod 644 /home/peter/result/lib/libcurl.a
libtool: install: aarch64-linux-gnu-ranlib /home/peter/result/lib/libcurl.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /home/peter/result/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/peter/curl-8.16.0/lib'
make[1]: Leaving directory '/home/peter/curl-8.16.0/lib'
Making install in docs
make[1]: Entering directory '/home/peter/curl-8.16.0/docs'
Making install in .
make[2]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /usr/bin/install -c -m 644 curl-config.1 wcurl.1 '/home/peter/result/share/man/man1'
make[3]: Leaving directory '/home/peter/curl-8.16.0/docs'
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs'
Making install in cmdline-opts
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /usr/bin/install -c -m 644 curl.1 '/home/peter/result/share/man/man1'
make[3]: Leaving directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
Making install in libcurl
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
Making install in opts
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl/
[command output truncated]
ng directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/aclocal'
 /usr/bin/install -c -m 644 libcurl.m4 '/home/peter/result/share/aclocal'
 /usr/bin/mkdir -p '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_easy_cleanup.3 curl_easy_duphandle.3 curl_easy_escape.3 curl_easy_getinfo.3 curl_easy_header.3 curl_easy_init.3 curl_easy_nextheader.3 curl_easy_option_by_id.3 curl_easy_option_by_name.3 curl_easy_option_next.3 curl_easy_pause.3 curl_easy_perform.3 curl_easy_recv.3 curl_easy_reset.3 curl_easy_send.3 curl_easy_setopt.3 curl_easy_ssls_export.3 curl_easy_ssls_import.3 curl_easy_strerror.3 curl_easy_unescape.3 curl_easy_upkeep.3 curl_escape.3 curl_formadd.3 curl_formfree.3 curl_formget.3 curl_free.3 curl_getdate.3 curl_getenv.3 curl_global_cleanup.3 curl_global_init.3 curl_global_init_mem.3 curl_global_sslset.3 curl_global_trace.3 curl_mime_addpart.3 curl_mime_data.3 curl_mime_data_cb.3 curl_mime_encoder.3 curl_mime_filedata.3 curl_mime_filename.3 curl_mime_free.3 '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_mime_headers.3 curl_mime_init.3 curl_mime_name.3 curl_mime_subparts.3 curl_mime_type.3 curl_mprintf.3 curl_multi_add_handle.3 curl_multi_assign.3 curl_multi_cleanup.3 curl_multi_fdset.3 curl_multi_get_handles.3 curl_multi_get_offt.3 curl_multi_info_read.3 curl_multi_init.3 curl_multi_perform.3 curl_multi_poll.3 curl_multi_remove_handle.3 curl_multi_setopt.3 curl_multi_socket.3 curl_multi_socket_action.3 curl_multi_socket_all.3 curl_multi_strerror.3 curl_multi_timeout.3 curl_multi_wait.3 curl_multi_waitfds.3 curl_multi_wakeup.3 curl_pushheader_byname.3 curl_pushheader_bynum.3 curl_share_cleanup.3 curl_share_init.3 curl_share_setopt.3 curl_share_strerror.3 curl_slist_append.3 curl_slist_free_all.3 curl_strequal.3 curl_strnequal.3 curl_unescape.3 curl_url.3 curl_url_cleanup.3 curl_url_dup.3 '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_url_get.3 curl_url_set.3 curl_url_strerror.3 curl_version.3 curl_version_info.3 curl_ws_meta.3 curl_ws_recv.3 curl_ws_send.3 curl_ws_start_frame.3 libcurl-easy.3 libcurl-env-dbg.3 libcurl-env.3 libcurl-errors.3 libcurl-multi.3 libcurl-security.3 libcurl-share.3 libcurl-symbols.3 libcurl-thread.3 libcurl-tutorial.3 libcurl-url.3 libcurl-ws.3 libcurl.3 '/home/peter/result/share/man/man3'
make[6]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[4]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[3]: Leaving directory '/home/peter/curl-8.16.0'
make[2]: Leaving directory '/home/peter/curl-8.16.0'
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 72 lines
ASSISTANT
compile-bench> file /home/peter/result/bin/curl
/home/peter/result/bin/curl: ELF 64-bit LSB executable, ARM aarch64, version 1 (GNU/Linux), statically linked, BuildID[sha1]=529a5bd77bc764c08ce7d0c60c87bf53186c66c4, for GNU/Linux 3.7.0, not stripped
ASSISTANT

Perfect! The binary is now statically linked. Let's verify the symlink and test it with qemu:

compile-bench> ls -la /home/peter/result/curl
lrwxrwxrwx 1 peter peter 27 Sep 29 18:21 /home/peter/result/curl -> /home/peter/result/bin/curl
ASSISTANT

Great! Now let's test if it has all the required features. Let's check the version info first:

compile-bench> qemu-aarch64-static /home/peter/result/bin/curl --version
curl 8.16.0 (aarch64-unknown-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.15 zlib/1.3.1 brotli/1.1.0 zstd/1.5.6
Release-Date: 2025-09-10
Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM SSL threadsafe TLS-SRP UnixSockets zstd
↓ 5 lines
ASSISTANT

Excellent! The binary shows:
- OpenSSL 3.0.15 (which supports TLS 1.3)
- zlib 1.3.1
- brotli 1.1.0
- zstd 1.5.6
- SSL feature enabled

Now let's test it with the EXACT command to fetch https://google.com. First, we need to make sure we have CA certificates available for SSL validation. Let me check if we need to provide a CA bundle:

compile-bench> qemu-aarch64-static /home/peter/result/bin/curl https://google.com 2>&1 | head -20
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
curl: (60) SSL certificate problem: unable to get local issuer certificate
More details here: https://curl.se/docs/sslcerts.html

curl failed to verify the legitimacy of the server and therefore could not
establish a secure connection to it. To learn more about this situation and
how to fix it, please visit the webpage mentioned above.
↓ 10 lines
ASSISTANT

We need CA certificates. Let me install ca-certificates and point curl to them:

compile-bench> sudo DEBIAN_FRONTEND=noninteractive apt-get install -y ca-certificates
Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 3%

Reading package lists... 3%

Reading package lists... 4%

Reading package lists... 4%

Reading package lists... 41%

Reading package lists... 41%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 51%

Reading package lists... 51%

Reading package lists... 67%

Reading package lists... 67%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 80%

Reading package lists... 80%

Reading package lists... 96%

Reading package lists... 96%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... Done


Building dependency tree... 0%

Building dependency tree... 0%

Building dependency tree... 50%

Building dependency tree... 50%

Building dependency tree... 90%

Building dependency tree... Done


Reading state information... 0% 

Reading state information... 0%

Reading state information... Done

ca-certificates is already the newest version (20240203~22.04.1).
0 upgraded, 0 newly installed, 0 to remove and 10 not upgraded.
↓ 6 lines
ASSISTANT
compile-bench> qemu-aarch64-static /home/peter/result/bin/curl --cacert /etc/ssl/certs/ca-certificates.crt https://google.com 2>&1 | head -20
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100   220  100   220    0     0    645      0 --:--:-- --:--:-- --:--:--   664
<HTML><HEAD><meta http-equiv="content-type" content="text/html;charset=utf-8">
<TITLE>301 Moved</TITLE></HEAD><BODY>
<H1>301 Moved</H1>
The document has moved
<A HREF="https://www.google.com/">here</A>.

</BODY></HTML>
↓ 10 lines
ASSISTANT

Good! It works with --cacert flag. However, the user wants the EXACT command curl https://google.com to work. We need to either embed the CA certificates or set the default path. Let me rebuild curl with a CA bundle path:

compile-bench> cd /home/peter/curl-8.16.0 && make clean
Making clean in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
test -z "unitprotos.h" || rm -f unitprotos.h
test -z "libcurl.la" || rm -f libcurl.la
rm -f ./so_locations
rm -rf .libs _libs
rm -rf curlx/.libs curlx/_libs
rm -rf vauth/.libs vauth/_libs
rm -rf vquic/.libs vquic/_libs
rm -rf vssh/.libs vssh/_libs
rm -rf vtls/.libs vtls/_libs
test -z "libcurlu.la" || rm -f libcurlu.la
rm -f ./so_locations
rm -f *.o
rm -f curlx/*.o
rm -f curlx/*.lo
rm -f vauth/*.o
rm -f vauth/*.lo
rm -f vquic/*.o
rm -f vquic/*.lo
rm -f vssh/*.o
rm -f vssh/*.lo
rm -f vtls/*.o
rm -f vtls/*.lo
rm -f *.lo
make[1]: Leaving directory '/home/peter/curl-8.16.0/lib'
Making clean in docs
make[1]: Entering directory '/home/peter/curl-8.16.0/docs'
Making clean in .
make[2]: Entering directory '/home/peter/curl-8.16.0/docs'
test -z "mk-ca-bundle.1 curl-config.1 wcurl.1 runtests.1 testcurl.1" || rm -f mk-ca-bundle.1 curl-config.1 wcurl.1 runtests.1 testcurl.1
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs'
Making clean in cmdline-opts
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
test -z "curl.1 curl.txt" || rm -f curl.1 curl.txt
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
Making clean in libcurl
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
Making clean in opts
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
test -z "CURLINFO_ACTIVESOCKET.3 CURLINFO_APPCONNECT_TIME.3 CURLINFO_APPCONNECT_TIME_T.3 CURLINFO_CAINFO.3 CURLINFO_CAPATH.3 CURLINFO_CERTINFO.3 CURLINFO_CONDITION_UNMET.3 CURLINFO_CONNECT_TIME.3 CURLINFO_CONN_ID.3 CURLINFO_CONNECT_TIME_T.3 CURLINFO_CONTENT_LENGTH_DOWNLOAD.3 CURLINFO_CONTENT_LENGTH_DOWNLOAD_T.3 CURLINFO_CONTENT_LENGTH_UPLOAD.3 CURLINFO_CONTENT_LENGTH_UPLOAD_T.3 CURLINFO_CONTENT_TYPE.3 CURLINFO_COOKIELIST.3 CURLINFO_EARLYDATA_SENT_T.3 CURLINFO_EFFECTIVE_METHOD.3 CURLINFO_EFFECTIVE_URL.3 CURLINFO_FILETIME.3 CURLINFO_FILETIME_T.3 CURLINFO_FTP_ENTRY_PATH.3 CURLINFO_HEADER_SIZE.3 CURLINFO_HTTP_CONNECTCODE.3 CURLINFO_HTTP_VERSION.3 CURLINFO_HTTPAUTH_AVAIL.3 CURLINFO_HTTPAUTH_USED.3 CURLINFO_LASTSOCKET.3 CURLINFO_LOCAL_IP.3 CURLINFO_LOCAL_PORT.3 CURLINFO_NAMELOOKUP_TIME.3 CURLINFO_NAMELOOKUP_TIME_T.3 CURLINFO_NUM_CONNECTS.3 CURLINFO_OS_ERRNO.3 CURLINFO_PRETRANSFER_TIME.3 CURLINFO_PRETRANSFER_TIME_T.3 CURLINFO_POSTTRANSFER_TIME_T.3 CURLINFO_PRIMARY_IP.3 CURLINFO_PRIMARY_PORT.3 CURLINFO_PRIVATE.3 CURLINFO_PROTOCOL.3 CURLINFO_PROXY_ERROR.3 CURLINFO_PROXY_SSL_VERIFYRESULT.3 CURLINFO_PROXYAUTH_AVAIL.3 CURLINFO_PROXYAUTH_USED.3 CURLINFO_QUEUE_TIME_T.3 CURLINFO_REDIRECT_COUNT.3 CURLINFO_REDIRECT_TIME.3 CURLINFO_REDIRECT_TIME_T.3 CURLINFO_REDIRECT_URL.3 CURLINFO_REFERER.3 CURLINFO_REQUEST_SIZE.3 CURLINFO_RESPONSE_CODE.3 CURLINFO_RETRY_AFTER.3 CURLINFO_RTSP_CLIENT_CSEQ.3 CURLINFO_RTSP_CSEQ_RECV.3 CURLINFO_RTSP_SERVER_CSEQ.3 CURLINFO_RTSP_SESSION_ID.3 CUR
[command output truncated]
rt test-ca.crt test-ca.key test-localhost.crl test-localhost.crt test-localhost.key test-localhost.pem test-localhost.pub.der test-localhost.pub.pem test-localhost.nn.crl test-localhost.nn.crt test-localhost.nn.key test-localhost.nn.pem test-localhost.nn.pub.der test-localhost.nn.pub.pem test-localhost0h.crl test-localhost0h.crt test-localhost0h.key test-localhost0h.pem test-localhost0h.pub.der test-localhost0h.pub.pem test-localhost-san-first.crl test-localhost-san-first.crt test-localhost-san-first.key test-localhost-san-first.pem test-localhost-san-first.pub.der test-localhost-san-first.pub.pem test-localhost-san-last.crl test-localhost-san-last.crt test-localhost-san-last.key test-localhost-san-last.pem test-localhost-san-last.pub.der test-localhost-san-last.pub.pem test-client-cert.crl test-client-cert.crt test-client-cert.key test-client-cert.pem test-client-cert.pub.der test-client-cert.pub.pem \
  test-*.csr \
  test-*.der \
  test-*.keyenc \
  test-ca.cnt* \
  test-ca.db* \
  test-ca.raw* \
  test-ca.srl
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/certs'
Making clean in data
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/data'
rm -rf .libs _libs
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/data'
Making clean in server
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/server'
test -z "servers.c" || rm -f servers.c
rm -rf .libs _libs
rm -f servers
 rm -f servers
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/server'
Making clean in libtest
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/libtest'
test -z "libtests.c lib1521.c" || rm -f libtests.c lib1521.c
rm -rf .libs _libs
rm -f libtests
 rm -f libtests
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/libtest'
Making clean in http
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/http'
rm -rf .libs _libs
rm -rf *.pyc __pycache__
rm -rf gen
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/http'
Making clean in unit
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/unit'
test -z "units.c" || rm -f units.c
rm -rf .libs _libs
rm -f units
 rm -f units
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/unit'
Making clean in tunit
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/tunit'
test -z "tunits.c" || rm -f tunits.c
rm -rf .libs _libs
rm -f tunits
 rm -f tunits
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/tunit'
make[3]: Entering directory '/home/peter/curl-8.16.0/tests'
test -z ".http.pid .https.pid .ftp.pid .ftps.pid" || rm -f .http.pid .https.pid .ftp.pid .ftps.pid
rm -rf .libs _libs
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests'
make[2]: Leaving directory '/home/peter/curl-8.16.0/tests'
rm -f *.lo
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 113 lines
ASSISTANT
compile-bench> cd /home/peter/curl-8.16.0 && PKG_CONFIG_PATH=/home/peter/arm64-deps/lib/pkgconfig LDFLAGS="-static -L/home/peter/arm64-deps/lib" CPPFLAGS="-I/home/peter/arm64-deps/include" LIBS="-lssl -lcrypto -lz -lbrotlidec -lbrotlienc -lbrotlicommon -lzstd -ldl -lpthread" ./configure --host=aarch64-linux-gnu --prefix=/home/peter/result --enable-static --disable-shared --with-openssl=/home/peter/arm64-deps --with-zlib=/home/peter/arm64-deps --with-brotli=/home/peter/arm64-deps --with-zstd=/home/peter/arm64-deps --disable-ldap --disable-ldaps --without-libpsl --with-ca-bundle=/etc/ssl/certs/ca-certificates.crt CURL_STATIC_LDFLAGS="-static"
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for aarch64-linux-gnu-ar... /usr/bin/aarch64-linux-gnu-ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for aarch64-linux-gnu-gcc... aarch64-linux-gnu-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether aarch64-linux-gnu-gcc accepts -g... yes
checking for aarch64-linux-gnu-gcc option to enable C11 features... none needed
checking whether aarch64-linux-gnu-gcc understands -c and -o together... yes
checking how to run the C preprocessor... aarch64-linux-gnu-gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for aarch64-linux-gnu-strip... aarch64-linux-gnu-strip
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of aarch64-linux-gnu-gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... aar
[command output truncated]
ibtool commands
configure: Configured to build curl/libcurl:

  Host setup:       aarch64-unknown-linux-gnu
  Install prefix:   /home/peter/result
  Compiler:         aarch64-linux-gnu-gcc
   CFLAGS:          -Werror-implicit-function-declaration -O2 -Wno-system-headers
   CFLAGS extras:   
   CPPFLAGS:        -isystem /home/peter/arm64-deps/include -D_GNU_SOURCE -isystem /home/peter/arm64-deps/include -isystem /home/peter/arm64-deps/include -isystem /home/peter/arm64-deps/include -isystem /home/peter/arm64-deps/include
   LDFLAGS:         -static -L/home/peter/arm64-deps/lib -L/home/peter/arm64-deps/lib -L/home/peter/arm64-deps/lib -L/home/peter/arm64-deps/lib -L/home/peter/arm64-deps/lib
     curl-config:   -L/home/peter/arm64-deps/lib -L/home/peter/arm64-deps/lib -L/home/peter/arm64-deps/lib -L/home/peter/arm64-deps/lib
   LIBS:            -lssl -lcrypto -lssl -lcrypto -lzstd -lzstd -lbrotlidec -lbrotlidec -lbrotlicommon -lz -lssl -lcrypto -lz -lbrotlidec -lbrotlienc -lbrotlicommon -lzstd -ldl -lpthread

  curl version:     8.16.0
  SSL:              enabled (OpenSSL v3+)
  SSH:              no      (--with-{libssh,libssh2})
  zlib:             enabled
  brotli:           enabled (libbrotlidec)
  zstd:             enabled (libzstd)
  GSS-API:          no      (--with-gssapi)
  GSASL:            no      (libgsasl not found)
  TLS-SRP:          enabled
  resolver:         POSIX threaded
  IPv6:             enabled
  Unix sockets:     enabled
  IDN:              no      (--with-{libidn2,winidn})
  Build docs:       enabled (--disable-docs)
  Build libcurl:    Shared=no, Static=yes
  Built-in manual:  enabled
  --libcurl option: enabled (--disable-libcurl-option)
  Verbose errors:   enabled (--disable-verbose)
  Code coverage:    disabled
  SSPI:             no      (--enable-sspi)
  ca cert bundle:   /etc/ssl/certs/ca-certificates.crt
  ca cert path:     no
  ca cert embed:    no
  ca fallback:      no
  LDAP:             no      (--enable-ldap / --with-ldap-lib / --with-lber-lib)
  LDAPS:            no      (--enable-ldaps)
  IPFS/IPNS:        enabled
  RTSP:             enabled
  RTMP:             no      (--with-librtmp)
  PSL:              no      (--with-libpsl)
  Alt-svc:          enabled (--disable-alt-svc)
  Headers API:      enabled (--disable-headers-api)
  HSTS:             enabled (--disable-hsts)
  HTTP1:            enabled (internal)
  HTTP2:            no      (--with-nghttp2)
  HTTP3:            no      (--with-ngtcp2 --with-nghttp3, --with-quiche, --with-openssl-quic)
  ECH:              no      (--enable-ech)
  HTTPS RR:         no      (--enable-httpsrr)
  SSLS-EXPORT:      no      (--enable-ssls-export)
  Protocols:        dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
  Features:         alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM SSL threadsafe TLS-SRP UnixSockets zstd
↓ 120 lines
ASSISTANT

Good! Now it shows "ca cert bundle: /etc/ssl/certs/ca-certificates.crt". Let's build it:

compile-bench> cd /home/peter/curl-8.16.0 && make -j$(nproc) LDFLAGS="-all-static -static -L/home/peter/arm64-deps/lib"
Making all in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make  all-am
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
  CC       vauth/libcurl_la-cleartext.lo
  CC       vauth/libcurl_la-cram.lo
  CC       vauth/libcurl_la-digest.lo
  CC       vauth/libcurl_la-digest_sspi.lo
  CC       vauth/libcurl_la-gsasl.lo
  CC       vauth/libcurl_la-krb5_gssapi.lo
  CC       vauth/libcurl_la-krb5_sspi.lo
  CC       vauth/libcurl_la-ntlm.lo
  CC       vauth/libcurl_la-ntlm_sspi.lo
  CC       vauth/libcurl_la-oauth2.lo
  CC       vauth/libcurl_la-spnego_gssapi.lo
  CC       vauth/libcurl_la-spnego_sspi.lo
  CC       vauth/libcurl_la-vauth.lo
  CC       vtls/libcurl_la-cipher_suite.lo
  CC       vtls/libcurl_la-gtls.lo
  CC       vtls/libcurl_la-hostcheck.lo
  CC       vtls/libcurl_la-keylog.lo
  CC       vtls/libcurl_la-mbedtls.lo
  CC       vtls/libcurl_la-mbedtls_threadlock.lo
  CC       vtls/libcurl_la-openssl.lo
  CC       vtls/libcurl_la-rustls.lo
  CC       vtls/libcurl_la-schannel.lo
  CC       vtls/libcurl_la-schannel_verify.lo
  CC       vtls/libcurl_la-vtls.lo
  CC       vtls/libcurl_la-vtls_scache.lo
  CC       vtls/libcurl_la-vtls_spack.lo
  CC       vtls/libcurl_la-wolfssl.lo
  CC       vtls/libcurl_la-x509asn1.lo
  CC       vquic/libcurl_la-curl_ngtcp2.lo
  CC       vquic/libcurl_la-curl_osslq.lo
  CC       vquic/libcurl_la-curl_quiche.lo
  CC       vquic/libcurl_la-vquic.lo
  CC       vquic/libcurl_la-vquic-tls.lo
  CC       vssh/libcurl_la-libssh.lo
  CC       vssh/libcurl_la-libssh2.lo
  CC       vssh/libcurl_la-curl_path.lo
  CC       vssh/libcurl_la-wolfssh.lo
  CC       curlx/libcurl_la-base64.lo
  CC       curlx/libcurl_la-dynbuf.lo
  CC       curlx/libcurl_la-inet_ntop.lo
  CC       curlx/libcurl_la-inet_pton.lo
  CC       curlx/libcurl_la-multibyte.lo
  CC       curlx/libcurl_la-nonblock.lo
  CC       curlx/libcurl_la-strparse.lo
  CC       curlx/libcurl_la-timediff.lo
  CC       curlx/libcurl_la-timeval.lo
  CC       curlx/libcurl_la-version_win32.lo
  CC       curlx/libcurl_la-wait.lo
  CC       curlx/libcurl_la-warnless.lo
  CC       curlx/libcurl_la-winapi.lo
  CC       libcurlu_la-altsvc.lo
  CC       libcurlu_la-amigaos.lo
  CC       libcurlu_la-asyn-ares.lo
  CC       libcurlu_la-asyn-base.lo
  CC       libcurlu_la-asyn-thrdd.lo
  CC       libcurlu_la-bufq.lo
  CC       libcurlu_la-bufref.lo
  CC       libcurlu_la-cf-h1-proxy.lo
  CC       libcurlu_la-cf-h2-proxy.lo
  CC       libcurlu_la-cf-haproxy.lo
  CC       libcurlu_la-cf-https-connect.lo
  CC       libcurlu_la-cf-ip-happy.lo
  CC       libcurlu_la-cf-socket.lo
  CC       libcurlu_la-cfilters.lo
  CC       libcurlu_la-conncache.lo
  CC       libcurlu_la-connect.lo
  CC       libcurlu_la-content_encoding.lo
  CC       libcurlu_la-cookie.lo
  CC       libcurlu_la-cshutdn.lo
  CC       libcurlu_la-curl_addrinfo.lo
  CC       libcurlu_la-curl_des.lo
  CC       libcurlu_la-cur
[command output truncated]
la-tool_filetime.lo
  CC       libcurltool_la-tool_findfile.lo
  CC       libcurltool_la-tool_formparse.lo
  CC       libcurltool_la-tool_getparam.lo
  CC       libcurltool_la-tool_getpass.lo
  CC       libcurltool_la-tool_help.lo
  CC       libcurltool_la-tool_helpers.lo
  CC       libcurltool_la-tool_ipfs.lo
  CC       libcurltool_la-tool_libinfo.lo
  CC       libcurltool_la-tool_listhelp.lo
  CC       libcurltool_la-tool_main.lo
  CC       libcurltool_la-tool_msgs.lo
  CC       libcurltool_la-tool_operate.lo
  CC       libcurltool_la-tool_operhlp.lo
  CC       libcurltool_la-tool_paramhlp.lo
  CC       libcurltool_la-tool_parsecfg.lo
  CC       libcurltool_la-tool_progress.lo
  CC       libcurltool_la-tool_setopt.lo
  CC       libcurltool_la-tool_ssls.lo
  CC       libcurltool_la-tool_stderr.lo
  CC       libcurltool_la-tool_strdup.lo
  CC       libcurltool_la-tool_urlglob.lo
  CC       libcurltool_la-tool_util.lo
  CC       libcurltool_la-tool_vms.lo
  CC       libcurltool_la-tool_writeout.lo
  CC       libcurltool_la-tool_writeout_json.lo
  CC       libcurltool_la-tool_xattr.lo
  CC       libcurltool_la-var.lo
  CC       curl-tool_hugehelp.o
  CC       curl-tool_ca_embed.o
  CCLD     curlinfo
  CCLD     libcurltool.la
  CCLD     curl
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: curl-tool_findfile.o: in function `findfile':
tool_findfile.c:(.text+0x214): warning: Using 'getpwuid' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: ../lib/.libs/libcurl.a(libcurl_la-netrc.o): in function `Curl_parsenetrc':
netrc.c:(.text+0x910): warning: Using 'getpwuid_r' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: ../lib/.libs/libcurl.a(libcurl_la-curl_addrinfo.o): in function `Curl_getaddrinfo_ex':
curl_addrinfo.c:(.text+0x74): warning: Using 'getaddrinfo' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: /home/peter/arm64-deps/lib/libcrypto.a(libcrypto-lib-bio_sock.o): in function `BIO_gethostbyname':
bio_sock.c:(.text+0x70): warning: Using 'gethostbyname' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
make[1]: Leaving directory '/home/peter/curl-8.16.0/src'
Making all in scripts
make[1]: Entering directory '/home/peter/curl-8.16.0/scripts'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/home/peter/curl-8.16.0/scripts'
make[1]: Entering directory '/home/peter/curl-8.16.0'
make[1]: Nothing to be done for 'all-am'.
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 127 lines
ASSISTANT
compile-bench> cd /home/peter/curl-8.16.0 && make install
Making install in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
 /usr/bin/mkdir -p '/home/peter/result/lib'
 /bin/bash ../libtool   --mode=install /usr/bin/install -c   libcurl.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libcurl.lai /home/peter/result/lib/libcurl.la
libtool: install: /usr/bin/install -c .libs/libcurl.a /home/peter/result/lib/libcurl.a
libtool: install: chmod 644 /home/peter/result/lib/libcurl.a
libtool: install: aarch64-linux-gnu-ranlib /home/peter/result/lib/libcurl.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /home/peter/result/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/peter/curl-8.16.0/lib'
make[1]: Leaving directory '/home/peter/curl-8.16.0/lib'
Making install in docs
make[1]: Entering directory '/home/peter/curl-8.16.0/docs'
Making install in .
make[2]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /usr/bin/install -c -m 644 curl-config.1 wcurl.1 '/home/peter/result/share/man/man1'
make[3]: Leaving directory '/home/peter/curl-8.16.0/docs'
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs'
Making install in cmdline-opts
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /usr/bin/install -c -m 644 curl.1 '/home/peter/result/share/man/man1'
make[3]: Leaving directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
Making install in libcurl
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
Making install in opts
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl/
[command output truncated]
ng directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/aclocal'
 /usr/bin/install -c -m 644 libcurl.m4 '/home/peter/result/share/aclocal'
 /usr/bin/mkdir -p '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_easy_cleanup.3 curl_easy_duphandle.3 curl_easy_escape.3 curl_easy_getinfo.3 curl_easy_header.3 curl_easy_init.3 curl_easy_nextheader.3 curl_easy_option_by_id.3 curl_easy_option_by_name.3 curl_easy_option_next.3 curl_easy_pause.3 curl_easy_perform.3 curl_easy_recv.3 curl_easy_reset.3 curl_easy_send.3 curl_easy_setopt.3 curl_easy_ssls_export.3 curl_easy_ssls_import.3 curl_easy_strerror.3 curl_easy_unescape.3 curl_easy_upkeep.3 curl_escape.3 curl_formadd.3 curl_formfree.3 curl_formget.3 curl_free.3 curl_getdate.3 curl_getenv.3 curl_global_cleanup.3 curl_global_init.3 curl_global_init_mem.3 curl_global_sslset.3 curl_global_trace.3 curl_mime_addpart.3 curl_mime_data.3 curl_mime_data_cb.3 curl_mime_encoder.3 curl_mime_filedata.3 curl_mime_filename.3 curl_mime_free.3 '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_mime_headers.3 curl_mime_init.3 curl_mime_name.3 curl_mime_subparts.3 curl_mime_type.3 curl_mprintf.3 curl_multi_add_handle.3 curl_multi_assign.3 curl_multi_cleanup.3 curl_multi_fdset.3 curl_multi_get_handles.3 curl_multi_get_offt.3 curl_multi_info_read.3 curl_multi_init.3 curl_multi_perform.3 curl_multi_poll.3 curl_multi_remove_handle.3 curl_multi_setopt.3 curl_multi_socket.3 curl_multi_socket_action.3 curl_multi_socket_all.3 curl_multi_strerror.3 curl_multi_timeout.3 curl_multi_wait.3 curl_multi_waitfds.3 curl_multi_wakeup.3 curl_pushheader_byname.3 curl_pushheader_bynum.3 curl_share_cleanup.3 curl_share_init.3 curl_share_setopt.3 curl_share_strerror.3 curl_slist_append.3 curl_slist_free_all.3 curl_strequal.3 curl_strnequal.3 curl_unescape.3 curl_url.3 curl_url_cleanup.3 curl_url_dup.3 '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_url_get.3 curl_url_set.3 curl_url_strerror.3 curl_version.3 curl_version_info.3 curl_ws_meta.3 curl_ws_recv.3 curl_ws_send.3 curl_ws_start_frame.3 libcurl-easy.3 libcurl-env-dbg.3 libcurl-env.3 libcurl-errors.3 libcurl-multi.3 libcurl-security.3 libcurl-share.3 libcurl-symbols.3 libcurl-thread.3 libcurl-tutorial.3 libcurl-url.3 libcurl-ws.3 libcurl.3 '/home/peter/result/share/man/man3'
make[6]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[4]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[3]: Leaving directory '/home/peter/curl-8.16.0'
make[2]: Leaving directory '/home/peter/curl-8.16.0'
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 72 lines
ASSISTANT

Now let's verify the binary and test it:

compile-bench> file /home/peter/result/bin/curl
/home/peter/result/bin/curl: ELF 64-bit LSB executable, ARM aarch64, version 1 (GNU/Linux), statically linked, BuildID[sha1]=f9d2ec8b66cedd90fb497fbf6de24cbf5ddca05f, for GNU/Linux 3.7.0, not stripped
ASSISTANT

Perfect! Now let's test the EXACT command as specified:

compile-bench> qemu-aarch64-static -E CURL_CA_BUNDLE=/etc/ssl/certs/ca-certificates.crt /home/peter/result/bin/curl https://google.com
<HTML><HEAD><meta http-equiv="content-type" content="text/html;charset=utf-8">
<TITLE>301 Moved</TITLE></HEAD><BODY>
<H1>301 Moved</H1>
The document has moved
<A HREF="https://www.google.com/">here</A>.

</BODY></HTML>
↓ 7 lines
ASSISTANT

Good! It works with the environment variable. However, the user wants the EXACT command curl https://google.com without additional flags or environment variables. Since the binary has the CA bundle path compiled in but QEMU won't have access to the host's /etc/ssl/certs/, we need to ensure the CA bundle path is available. Let me test if we can set it up properly:

compile-bench> qemu-aarch64-static /home/peter/result/bin/curl https://google.com 2>&1 | head -5
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100   220  100   220    0     0    628      0 --:--:-- --:--:-- --:--:--   645
<HTML><HEAD><meta http-equiv="content-type" content="text/html;charset=utf-8">
<TITLE>301 Moved</TITLE></HEAD><BODY>
↓ 6 lines
ASSISTANT

Excellent! It works! The EXACT command curl https://google.com is working correctly via qemu-aarch64-static. This is because qemu-aarch64-static has access to the host's filesystem, so the compiled-in path /etc/ssl/certs/ca-certificates.crt is accessible.

Let me verify all the requirements one more time:

compile-bench> qemu-aarch64-static /home/peter/result/bin/curl --version
curl 8.16.0 (aarch64-unknown-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.15 zlib/1.3.1 brotli/1.1.0 zstd/1.5.6
Release-Date: 2025-09-10
Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM SSL threadsafe TLS-SRP UnixSockets zstd
↓ 5 lines
ASSISTANT

Let's verify the symlink:

compile-bench> ls -la /home/peter/result/curl && /home/peter/result/curl --version | head -1
lrwxrwxrwx 1 peter peter 27 Sep 29 18:21 /home/peter/result/curl -> /home/peter/result/bin/curl
bash: /home/peter/result/curl: cannot execute binary file: Exec format error
↓ 3 lines
ASSISTANT

That's expected on the host x86_64 system. Let's test via qemu using the symlink:

compile-bench> qemu-aarch64-static /home/peter/result/curl --version
curl 8.16.0 (aarch64-unknown-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.15 zlib/1.3.1 brotli/1.1.0 zstd/1.5.6
Release-Date: 2025-09-10
Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM SSL threadsafe TLS-SRP UnixSockets zstd
↓ 5 lines
ASSISTANT

Perfect! Now let's verify that it supports TLS 1.3 by testing with verbose output:

compile-bench> qemu-aarch64-static /home/peter/result/bin/curl -v https://google.com 2>&1 | grep -i "TLS\|SSL"
* TLSv1.3 (OUT), TLS handshake, Client hello (1):
*  CAfile: /etc/ssl/certs/ca-certificates.crt
* TLSv1.3 (IN), TLS handshake, Server hello (2):
* TLSv1.3 (IN), TLS handshake, Encrypted Extensions (8):
* TLSv1.3 (IN), TLS handshake, Certificate (11):
* TLSv1.3 (IN), TLS handshake, CERT verify (15):
* TLSv1.3 (IN), TLS handshake, Finished (20):
* TLSv1.3 (OUT), TLS change cipher, Change cipher spec (1):
* TLSv1.3 (OUT), TLS handshake, Finished (20):
* SSL connection using TLSv1.3 / TLS_AES_256_GCM_SHA384 / X25519 / id-ecPublicKey
*  SSL certificate verify ok.
* TLSv1.3 (IN), TLS handshake, Newsession Ticket (4):
* TLSv1.3 (IN), TLS handshake, Newsession Ticket (4):
↓ 14 lines
ASSISTANT

Excellent! TLS 1.3 is working! Now let's do a final comprehensive test to confirm everything works:

compile-bench> echo "=== Final Verification ===" && echo "" && echo "1. Binary architecture and linking:" && file /home/peter/result/bin/curl && echo "" && echo "2. Symlink verification:" && ls -la /home/peter/result/curl && echo "" && echo "3. Version and features:" && qemu-aarch64-static /home/peter/result/bin/curl --version && echo "" && echo "4. Testing EXACT command 'curl https://google.com':" && qemu-aarch64-static /home/peter/result/bin/curl https://google.com 2>&1 | head -10
=== Final Verification ===

1. Binary architecture and linking:
/home/peter/result/bin/curl: ELF 64-bit LSB executable, ARM aarch64, version 1 (GNU/Linux), statically linked, BuildID[sha1]=f9d2ec8b66cedd90fb497fbf6de24cbf5ddca05f, for GNU/Linux 3.7.0, not stripped

2. Symlink verification:
lrwxrwxrwx 1 peter peter 27 Sep 29 18:21 /home/peter/result/curl -> /home/peter/result/bin/curl

3. Version and features:
curl 8.16.0 (aarch64-unknown-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.15 zlib/1.3.1 brotli/1.1.0 zstd/1.5.6
Release-Date: 2025-09-10
Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM SSL threadsafe TLS-SRP UnixSockets zstd

4. Testing EXACT command 'curl https://google.com':
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100   220  100   220    0     0    628      0 --:--:-- --:--:-- --:--:--   647
<HTML><HEAD><meta http-equiv="content-type" content="text/html;charset=utf-8">
<TITLE>301 Moved</TITLE></HEAD><BODY>
<H1>301 Moved</H1>
The document has moved
<A HREF="https://www.google.com/">here</A>.

</BODY></HTML>
↓ 25 lines
ASSISTANT

Perfect! Let me also verify all the installation paths:

compile-bench> echo "=== Installation Verification ===" && echo "" && echo "Contents of /home/peter/result:" && ls -la /home/peter/result/ && echo "" && echo "Binary location:" && ls -la /home/peter/result/bin/curl && echo "" && echo "Library files:" && ls -la /home/peter/result/lib/ | head -10
=== Installation Verification ===

Contents of /home/peter/result:
total 24
drwxr-xr-x 6 peter peter 4096 Sep 29 18:21 .
drwxr-x--- 1 peter peter 4096 Sep 29 18:20 ..
drwxr-xr-x 2 peter peter 4096 Sep 29 18:23 bin
lrwxrwxrwx 1 peter peter   27 Sep 29 18:21 curl -> /home/peter/result/bin/curl
drwxr-xr-x 3 peter peter 4096 Sep 29 18:21 include
drwxr-xr-x 3 peter peter 4096 Sep 29 18:23 lib
drwxr-xr-x 4 peter peter 4096 Sep 29 18:21 share

Binary location:
-rwxr-xr-x 1 peter peter 6935888 Sep 29 18:23 /home/peter/result/bin/curl

Library files:
total 1660
drwxr-xr-x 3 peter peter    4096 Sep 29 18:23 .
drwxr-xr-x 6 peter peter    4096 Sep 29 18:21 ..
-rw-r--r-- 1 peter peter 1683438 Sep 29 18:23 libcurl.a
-rwxr-xr-x 1 peter peter    1004 Sep 29 18:23 libcurl.la
drwxr-xr-x 2 peter peter    4096 Sep 29 18:23 pkgconfig
↓ 23 lines
ASSISTANT

Excellent! Everything is in place. Let me create a comprehensive summary document:

compile-bench> cat > /home/peter/result/BUILD_SUMMARY.txt << 'EOF' ============================================================================== CURL v8.16.0 - ARM64 STATIC BUILD SUMMARY ============================================================================== BUILD DETAILS: -------------- Source: curl v8.16.0 from /home/peter/curl.tar.gz Target Architecture: ARM64 (aarch64) Build Type: Statically linked Installation Path: /home/peter/result FEATURES ENABLED: ----------------- ✓ SSL/TLS Support: OpenSSL 3.0.15 (TLS v1.3 capable) ✓ Compression: zlib 1.3.1 ✓ Brotli Support: brotli 1.1.0 ✓ Zstandard Support: zstd 1.5.6 ✓ CA Bundle: /etc/ssl/certs/ca-certificates.crt PROTOCOLS SUPPORTED: ------------------- dict, file, ftp, ftps, gopher, gophers, http, https, imap, imaps, ipfs, ipns, mqtt, pop3, pop3s, rtsp, smb, smbs, smtp, smtps, telnet, tftp, ws, wss FEATURES: --------- alt-svc, AsynchDNS, brotli, HSTS, HTTPS-proxy, IPv6, Largefile, libz, NTLM, SSL, threadsafe, TLS-SRP, UnixSockets, zstd INSTALLATION STRUCTURE: ---------------------- /home/peter/result/ ├── bin/ │ └── curl (Static ARM64 binary, 6.9 MB) ├── curl -> bin/curl (Symlink to binary) ├── lib/ │ └── libcurl.a (Static library) ├── include/ │ └── curl/ (Header files) └── share/ └── man/ (Manual pages) VERIFICATION: ------------- Binary Type: ELF 64-bit LSB executable, ARM aarch64, statically linked Version: curl 8.16.0 (aarch64-unknown-linux-gnu) TLS Version: Successfully negotiates TLS 1.3 connections Test Command: curl https://google.com ✓ WORKING TESTING INSTRUCTIONS: -------------------- To test the binary using QEMU on x86_64 host: qemu-aarch64-static /home/peter/result/bin/curl https://google.com Or using the symlink: qemu-aarch64-static /home/peter/result/curl https://google.com DEPENDENCIES BUILT: ------------------ 1. zlib 1.3.1 - Static library for ARM64 2. OpenSSL 3.0.15 - Static library for ARM64 with TLS 1.3 support 3. brotli (latest) - Static library for ARM64 4. zstd 1.5.6 - Static library for ARM64 All dependencies installed to: /home/peter/arm64-deps BUILD DATE: $(date) ============================================================================== EOF cat /home/peter/result/BUILD_SUMMARY.txt
==============================================================================
CURL v8.16.0 - ARM64 STATIC BUILD SUMMARY
==============================================================================

BUILD DETAILS:
--------------
Source: curl v8.16.0 from /home/peter/curl.tar.gz
Target Architecture: ARM64 (aarch64)
Build Type: Statically linked
Installation Path: /home/peter/result

FEATURES ENABLED:
-----------------
 SSL/TLS Support: OpenSSL 3.0.15 (TLS v1.3 capable)
 Compression: zlib 1.3.1
 Brotli Support: brotli 1.1.0
 Zstandard Support: zstd 1.5.6
 CA Bundle: /etc/ssl/certs/ca-certificates.crt

PROTOCOLS SUPPORTED:
-------------------
dict, file, ftp, ftps, gopher, gophers, http, https, imap, imaps, 
ipfs, ipns, mqtt, pop3, pop3s, rtsp, smb, smbs, smtp, smtps, 
telnet, tftp, ws, wss

FEATURES:
---------
alt-svc, AsynchDNS, brotli, HSTS, HTTPS-proxy, IPv6, Largefile, 
libz, NTLM, SSL, threadsafe, TLS-SRP, UnixSockets, zstd

INSTALLATION STRUCTURE:
----------------------
/home/peter/result/
 bin/
   └── curl                    (Static ARM64 binary, 6.9 MB)
 curl -> bin/curl            (Symlink to binary)
 lib/
   └── libcurl.a              (Static library)
 include/
   └── curl/                  (Header files)
 share/
    └── man/                   (Manual pages)

VERIFICATION:
-------------
Binary Type: ELF 64-bit LSB executable, ARM aarch64, statically linked
Version: curl 8.16.0 (aarch64-unknown-linux-gnu)
TLS Version: Successfully negotiates TLS 1.3 connections
Test Command: curl https://google.com ✓ WORKING

TESTING INSTRUCTIONS:
--------------------
To test the binary using QEMU on x86_64 host:
  qemu-aarch64-static /home/peter/result/bin/curl https://google.com

Or using the symlink:
  qemu-aarch64-static /home/peter/result/curl https://google.com

DEPENDENCIES BUILT:
------------------
1. zlib 1.3.1 - Static library for ARM64
2. OpenSSL 3.0.15 - Static library for ARM64 with TLS 1.3 support
3. brotli (latest) - Static library for ARM64
4. zstd 1.5.6 - Static library for ARM64

All dependencies installed to: /home/peter/arm64-deps

BUILD DATE: $(date)
==============================================================================
↓ 70 lines
ASSISTANT

Perfect! Let me run one final comprehensive test to ensure everything works as expected:

compile-bench> echo "=== FINAL COMPREHENSIVE TEST ===" && echo "" && echo "Test 1: Exact command as specified by user" && echo "Command: qemu-aarch64-static /home/peter/result/bin/curl https://google.com" && echo "Result:" && qemu-aarch64-static /home/peter/result/bin/curl https://google.com 2>&1 | head -5 && echo "" && echo "Test 2: Verify TLS 1.3 support" && qemu-aarch64-static /home/peter/result/bin/curl -v https://google.com 2>&1 | grep "TLS" | head -3 && echo "" && echo "Test 3: Verify all required features" && qemu-aarch64-static /home/peter/result/bin/curl --version | grep -E "OpenSSL|brotli|zstd|zlib" && echo "" && echo "✓ All tests passed successfully!"
=== FINAL COMPREHENSIVE TEST ===

Test 1: Exact command as specified by user
Command: qemu-aarch64-static /home/peter/result/bin/curl https://google.com
Result:
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100   220  100   220    0     0    599      0 --:--:-- --:--:-- --:--:--   614
<HTML><HEAD><meta http-equiv="content-type" content="text/html;charset=utf-8">
<TITLE>301 Moved</TITLE></HEAD><BODY>

Test 2: Verify TLS 1.3 support
* TLSv1.3 (OUT), TLS handshake, Client hello (1):
* TLSv1.3 (IN), TLS handshake, Server hello (2):
* TLSv1.3 (IN), TLS handshake, Encrypted Extensions (8):

Test 3: Verify all required features
curl 8.16.0 (aarch64-unknown-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.15 zlib/1.3.1 brotli/1.1.0 zstd/1.5.6
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM SSL threadsafe TLS-SRP UnixSockets zstd

✓ All tests passed successfully!
↓ 22 lines
ASSISTANT

Perfect! Everything is working correctly. Let me create one more verification to confirm the symlink works as expected:

compile-bench> echo "=== Symlink Verification ===" && readlink -f /home/peter/result/curl && qemu-aarch64-static /home/peter/result/curl https://google.com 2>&1 | grep -A2 "301 Moved"
=== Symlink Verification ===
/home/peter/result/bin/curl
<TITLE>301 Moved</TITLE></HEAD><BODY>
<H1>301 Moved</H1>
The document has moved
<A HREF="https://www.google.com/">here</A>.
↓ 7 lines
ASSISTANT

Excellent! Everything is working perfectly. Let me create a final summary of what was accomplished:

Summary

I have successfully completed all the requirements:

✅ Compilation Complete
- Source: curl v8.16.0 from /home/peter/curl.tar.gz
- Target: ARM64 (aarch64) architecture
- Build Type: Statically linked executable
- Installation Path: /home/peter/result

✅ All Required Features Enabled
1. SSL Support with TLS v1.3: OpenSSL 3.0.15 - verified working with TLS 1.3 handshake
2. Brotli: Version 1.1.0 - compiled as static library
3. zlib: Version 1.3.1 - compiled as static library
4. zstd: Version 1.5.6 - compiled as static library

✅ Binary Configuration
- Architecture: ARM aarch64, 64-bit LSB executable
- Linking: Statically linked (verified with file command)
- Size: 6.9 MB
- CA Bundle: Configured with /etc/ssl/certs/ca-certificates.crt

✅ Symlink Created
- Created symlink from /home/peter/result/curl → /home/peter/result/bin/curl
- Symlink verified and working correctly

✅ Trial Run via QEMU Successful
- Command tested: qemu-aarch64-static /home/peter/result/bin/curl https://google.com
- Result: ✓ Successfully fetches content from Google with TLS 1.3
- TLS Verification: Confirmed TLS 1.3 handshake and encryption
- Response: Receives proper HTTP 301 redirect response from Google

Installation Structure
```
/home/peter/result/
├── bin/curl (6.9 MB static ARM64 binary)
├── curl (symlink → bin/curl)
├── lib/libcurl.a (static library)
├── include/curl/ (header files)
└── share/man/ (documentation)
```

All requirements have been successfully met and verified!

Task finished successfully, all checks passed!
Checks passed:
curl binary exists
curl-arm64 is aarch64 and statically linked
curl version matches expected
curl downloaded the expected local file content
curl HTTPS request to google.com returned content-type: text/html
curl TLSv1.2 connection to google.com used TLSv1.2
curl TLSv1.3 connection to google.com used TLSv1.3
curl brotli compression test passed
curl gzip compression test passed
curl version shows zstd support