<- Ranking
Summary
Task
jq-static-musl
Model
claude-haiku-4.5-thinking-16k logo
claude-haiku-4.5-thinking-16k
Status
Success
Performance
Cost$0.178
Total elapsed time3m24s
LLM inference time2m12s
Command execution time1m12s
Commands executed44
All details >
Attempt ID u6deasjr7vu27 Attempt group run-15-10-25-19-58
Revision 81634e2120a2 AWS Instance m8i.2xlarge
Start time 2025-10-15T18:02:38.209Z End time 2025-10-15T18:06:03.199Z
Task jq-static-musl Environment ubuntu-22.04-amd64
Model claude-haiku-4.5-thinking-16k logo claude-haiku-4.5-thinking-16k OpenRouter slug anthropic/claude-haiku-4.5
Temperature 1 Explicit prompt caching true
User msg after tool call true Max tool calls 100
Total timeout seconds 1200 Single command timeout 600
Cost $0.178 Duration 3m24s
LLM inference time 2m12s Command execution time 1m12s
Final context tokens 32,701 Total output tokens 10,153
Output reasoning tokens 4,863 Messages 91
Assistant messages 45 User messages 1
System messages 1 Commands executed 44
Download full attempt result JSON
Task
Task: jq-static-musl

jq 1.8.1 is a command-line JSON utility for viewing and transforming JSON.
Project link: github.com/jqlang/jq

Task:
Compile and install statically-linked jq to a specific location. The binary must use musl C library (not the standard glibc).

Difficulties:
musl toolchain setup, avoiding glibc-only assumptions.

Environment:
Ubuntu 22.04 on amd64, with internet access.

View task page
Execution log
SYSTEM

You are a package-building specialist operating a Ubuntu 22.04 bash shell via one tool: run_terminal_cmd.
The current working directory of every run_terminal_cmd is /home/peter.
Execution rules:
- Always pass non-interactive flags for any command that could prompt (e.g., -y, --yes, DEBIAN_FRONTEND=noninteractive).
- Don't include any newlines in the command.
- You can use sudo.
If you encounter any errors or issues while doing the user's request, you must fix them and continue the task.
At the end verify you did the user request correctly.

USER

You are given jq v1.8.1 source code at /home/peter/jq.tar.gz. Please compile the jq package using musl as the C standard library and install it to /home/peter/result. Create a symlink from /home/peter/result/jq to the compiled jq binary. The binary must be statically linked and must use musl (not glibc).

ASSISTANT
Show reasoning

Let me break down what needs to be done:

1. Extract the jq v1.8.1 source code from /home/peter/jq.tar.gz
2. Compile jq with musl as the C standard library
3. Install it to /home/peter/result
4. Create a symlink from /home/peter/result/jq to the compiled binary
5. Ensure the binary is statically linked and uses musl (not glibc)

Let me start by:
1. Extracting the tar.gz file
2. Setting up the musl build environment
3. Configuring and building jq with musl
4. Installing to the result directory
5. Creating the symlink
6. Verifying the binary is statically linked and uses musl

First, I'll need to check what's available in the system and extract the source.

I'll help you compile jq v1.8.1 with musl and create a static binary. Let me start by extracting the source and setting up the build environment.

compile-bench> cd /home/peter && tar -xzf jq.tar.gz && ls -la
total 2008
drwxr-x--- 1 peter peter    4096 Oct 15 18:02 .
drwxr-xr-x 1 root  root     4096 Sep 15 11:21 ..
-rw-r--r-- 1 peter peter     220 Jan  6  2022 .bash_logout
-rw-r--r-- 1 peter peter    3771 Jan  6  2022 .bashrc
-rw-r--r-- 1 peter peter     807 Jan  6  2022 .profile
drwxr-xr-x 9 peter peter    4096 Jul  1 11:40 jq-1.8.1
-rw-r--r-- 1 peter peter 2026798 Oct 15 18:02 jq.tar.gz
↓ 9 lines
ASSISTANT
Show reasoning

The user wants me to compile jq v1.8.1 with musl. Let me continue with the compilation process. First, I need to:

1. Install musl development tools
2. Configure jq to use musl as the C library
3. Compile with static linking
4. Install to /home/peter/result
5. Create a symlink from /home/peter/result/jq to the compiled binary

Let me start by installing the necessary tools and then configure/compile jq.

compile-bench> cd /home/peter/jq-1.8.1 && ls -la
total 1184
drwxr-xr-x 9 peter peter   4096 Jul  1 11:40 .
drwxr-x--- 1 peter peter   4096 Oct 15 18:02 ..
-rw-r--r-- 1 peter peter  10686 Jul  1 11:39 AUTHORS
-rw-r--r-- 1 peter peter   7887 Jul  1 11:39 COPYING
-rw-r--r-- 1 peter peter  33286 Jul  1 11:39 ChangeLog
-rw-r--r-- 1 peter peter   9090 Jul  1 11:39 Makefile.am
-rw-r--r-- 1 peter peter  75461 Jul  1 11:39 Makefile.in
-rw-r--r-- 1 peter peter  24670 Jul  1 11:39 NEWS.md
-rw-r--r-- 1 peter peter   2434 Jul  1 11:39 README.md
-rw-r--r-- 1 peter peter  46459 Jul  1 11:39 aclocal.m4
drwxr-xr-x 3 peter peter   4096 Jul  1 11:40 config
-rwxr-xr-x 1 peter peter 665647 Jul  1 11:39 configure
-rw-r--r-- 1 peter peter   9881 Jul  1 11:39 configure.ac
drwxr-xr-x 5 peter peter   4096 Jul  1 11:40 docs
-rw-r--r-- 1 peter peter 124253 Jul  1 11:39 jq.1
-rw-r--r-- 1 peter peter 124253 Jul  1 11:39 jq.1.prebuilt
-rw-r--r-- 1 peter peter   1431 Jul  1 11:39 jq.spec
-rw-r--r-- 1 peter peter    255 Jul  1 11:39 libjq.pc
-rw-r--r-- 1 peter peter    246 Jul  1 11:39 libjq.pc.in
drwxr-xr-x 2 peter peter   4096 Jul  1 11:40 m4
drwxr-xr-x 2 peter peter   4096 Jul  1 11:40 scripts
drwxr-xr-x 2 peter peter   4096 Jul  1 11:40 src
drwxr-xr-x 4 peter peter   4096 Jul  1 11:40 tests
drwxr-xr-x 4 peter peter   4096 Jul  1 11:40 vendor
↓ 26 lines
ASSISTANT
Show reasoning

The user wants me to compile jq with musl as the C standard library. Let me proceed with:

1. Installing musl-tools (which includes the musl-gcc compiler)
2. Configuring and compiling jq with musl
3. Installing it to /home/peter/result
4. Creating a symlink from /home/peter/result/jq to the compiled binary

Let me start by installing the necessary tools.

compile-bench> sudo apt-get update -y && sudo apt-get install -y musl-tools
0% [Working]
            
Get:1 http://security.ubuntu.com/ubuntu jammy-security InRelease [129 kB]

0% [Waiting for headers] [1 InRelease 14.2 kB/129 kB 11%]
                                                         
Hit:2 http://archive.ubuntu.com/ubuntu jammy InRelease

0% [Waiting for headers] [1 InRelease 14.2 kB/129 kB 11%]
0% [Waiting for headers] [1 InRelease 14.2 kB/129 kB 11%]
                                                         
Get:3 http://archive.ubuntu.com/ubuntu jammy-updates InRelease [128 kB]

0% [3 InRelease 5484 B/128 kB 4%] [1 InRelease 22.9 kB/129 kB 18%]
                                                                  
0% [3 InRelease 67.7 kB/128 kB 53%]
0% [3 InRelease 95.3 kB/128 kB 74%]
                                   
0% [Waiting for headers]
0% [Waiting for headers] [Waiting for headers]
                                              
Get:4 http://security.ubuntu.com/ubuntu jammy-security/main amd64 Packages [3429 kB]

0% [Waiting for headers] [4 Packages 2655 B/3429 kB 0%]
                                                       
Get:5 http://archive.ubuntu.com/ubuntu jammy-backports InRelease [127 kB]

0% [5 InRelease 2588 B/127 kB 2%] [4 Packages 78.0 kB/3429 kB 2%]
                                                                 
0% [4 Packages 175 kB/3429 kB 5%]
17% [Waiting for headers] [4 Packages 258 kB/3429 kB 8%]
                                                        
Get:6 http://archive.ubuntu.com/ubuntu jammy-updates/multiverse amd64 Packages [69.1 kB]

17% [6 Packages 2658 B/69.1 kB 4%] [4 Packages 397 kB/3429 kB 12%]
                                                                  
18% [Waiting for headers] [4 Packages 544 kB/3429 kB 16%]
                                                         
Get:7 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 Packages [3755 kB]

18% [7 Packages 9888 B/3755 kB 0%] [4 Packages 544 kB/3429 kB 16%]
18% [6 Packages store 0 B] [7 Packages 9888 B/3755 kB 0%] [4 Packages 544 kB/34
                                                                               
19% [7 Packages 15.7 kB/3755 kB 0%] [4 Packages 556 kB/3429 kB 16%]
                                                                   
32% [7 Packages 932 kB/3755 kB 25%]
32% [4 Packages store 0 B] [7 Packages 932 kB/3755 kB 25%] [Waiting for headers
                                                                               
Get:8 http://security.ubuntu.com/ubuntu jammy-security/multiverse amd64 Packages [71.0 kB]

36% [4 Packages store 0 B] [7 Packages 2072 kB/3755 kB 55%] [8 Packages 15.7 kB
37% [4 Packages store 0 B] [7 Packages 2089 kB/3755 kB 56%] [Waiting for header
                                                                               
Get:9 http://security.ubuntu.com/ubuntu jammy-security/restricted amd64 Packages [5742 kB]

37% [4 Packages store 0 B] [7 Packages 2089 kB/3755 kB 56%] [9 Packages 39.7 kB
                                                                     
[command output truncated]
e lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 80%

Reading package lists... 80%

Reading package lists... 96%

Reading package lists... 96%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... Done


Building dependency tree... 0%

Building dependency tree... 0%

Building dependency tree... 50%

Building dependency tree... 50%

Building dependency tree... 99%

Building dependency tree... Done


Reading state information... 0% 

Reading state information... 1%

Reading state information... Done

The following additional packages will be installed:
  musl musl-dev
Recommended packages:
  linux-musl-dev
The following NEW packages will be installed:
  musl musl-dev musl-tools
0 upgraded, 3 newly installed, 0 to remove and 14 not upgraded.
Need to get 1018 kB of archives.
After this operation, 4100 kB of additional disk space will be used.

0% [Working]
            
Get:1 http://archive.ubuntu.com/ubuntu jammy/universe amd64 musl amd64 1.2.2-4 [407 kB]

0% [1 musl 5500 B/407 kB 1%]
                            
39% [Working]
             
Get:2 http://archive.ubuntu.com/ubuntu jammy/universe amd64 musl-dev amd64 1.2.2-4 [605 kB]

40% [2 musl-dev 15.6 kB/605 kB 3%]
                                  
93% [Waiting for headers]
                         
Get:3 http://archive.ubuntu.com/ubuntu jammy/universe amd64 musl-tools amd64 1.2.2-4 [5520 B]

93% [3 musl-tools 5520 B/5520 B 100%]
                                     
100% [Working]
              
Fetched 1018 kB in 0s (4637 kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package musl:amd64.
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 10711 files and directories currently installed.)
Preparing to unpack .../musl_1.2.2-4_amd64.deb ...
Unpacking musl:amd64 (1.2.2-4) ...
Selecting previously unselected package musl-dev:amd64.
Preparing to unpack .../musl-dev_1.2.2-4_amd64.deb ...
Unpacking musl-dev:amd64 (1.2.2-4) ...
Selecting previously unselected package musl-tools.
Preparing to unpack .../musl-tools_1.2.2-4_amd64.deb ...
Unpacking musl-tools (1.2.2-4) ...
Setting up musl:amd64 (1.2.2-4) ...
Setting up musl-dev:amd64 (1.2.2-4) ...
Setting up musl-tools (1.2.2-4) ...
↓ 42 lines
ASSISTANT
Show reasoning

Good, musl-tools is installed. Now I need to compile jq with musl. Let me check what dependencies are needed and then configure jq to use musl as the C library.

I'll need to:
1. Install any build dependencies (like build-essential, autoconf, automake, libtool, etc.)
2. Configure jq to use musl-gcc
3. Build it with static linking
4. Install it to /home/peter/result
5. Create a symlink from /home/peter/result/jq to the binary

Let me first install build tools and dependencies.

compile-bench> sudo apt-get install -y build-essential autoconf automake libtool
Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 3%

Reading package lists... 3%

Reading package lists... 4%

Reading package lists... 4%

Reading package lists... 41%

Reading package lists... 41%

Reading package lists... 41%

Reading package lists... 41%

Reading package lists... 51%

Reading package lists... 51%

Reading package lists... 67%

Reading package lists... 67%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 80%

Reading package lists... 80%

Reading package lists... 96%

Reading package lists... 96%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... Done


Building dependency tree... 0%

Building dependency tree... 0%

Building dependency tree... 50%

Building dependency tree... 50%

Building dependency tree... 95%

Building dependency tree... Done


Reading state information... 0% 

Reading state information... 1%

Reading state information... Done

build-essential is already the newest version (12.9ubuntu3).
The following additional packages will be installed:
  autotools-dev libltdl-dev libltdl7 libsigsegv2 m4
Suggested packages:
  autoconf-archive gnu-standards autoconf-doc gettext libtool-doc gfortran
  | fortran95-compiler gcj-jdk m4-doc
The following NEW packages will be installed:
  autoconf automake autotools-dev libltdl-dev libltdl7 libsigsegv2 libtool m4
0 upgraded, 8 newly installed, 0 to remove and 14 not upgraded.
Need to get 1527 kB of archives.
After this operation, 6858 kB of additional disk space will be used.

0% [Working]
            
Get:1 http://archive.ubuntu.com/ubuntu jammy/main amd64 libsigsegv2 amd64 2.13-1ubuntu3 [14.6 kB]

1% [1 libsigsegv2 14.2 kB/14.6 kB 97%]
                                      
3% [Working]
            
Get:2 http://archive.ubuntu.com/ubuntu jammy/main amd64 m4 amd64 1.4.18-5ubuntu2 [199 kB]

3% [2 m4 2604 B/199 kB 1%]
                          
Get:3 http://archive.ubuntu.com/ubuntu jammy/main amd64 autoconf all 2.71-2 [338 kB]

16% [3 autoconf 1852 B/338 kB 1%]
                                 
Get:4 http://archive.ubuntu.com/ubuntu jammy/main amd64 autotools-dev all 20220109.1 [44.9 kB]

36% [4 autotools-dev 854 B/44.9 kB 2%]
                                      
Get:5 http://archive.ubuntu.com/ubuntu jammy/main amd64 automake all 1:1.16.5-1.3 [558 kB]

                                      
41% [5 automake 2012 B/558 kB 0%]
                                 
Get:6 http://archive.ubuntu.com/ubuntu jammy/main amd64 libltdl7 amd64 2.4.6-15build2 [39.6 kB]

73% [6 libltdl7 4550 B/39.6 kB 11%]
                                   
78% [Waiting for headers]
                         
Get:7 http:/
[command output truncated]
kB]

                                    
89% [8 libtool 0 B/164 kB 0%]
                             
100% [Working]
              
Fetched 1527 kB in 1s (1584 kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package libsigsegv2:amd64.
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 10977 files and directories currently installed.)
Preparing to unpack .../0-libsigsegv2_2.13-1ubuntu3_amd64.deb ...
Unpacking libsigsegv2:amd64 (2.13-1ubuntu3) ...
Selecting previously unselected package m4.
Preparing to unpack .../1-m4_1.4.18-5ubuntu2_amd64.deb ...
Unpacking m4 (1.4.18-5ubuntu2) ...
Selecting previously unselected package autoconf.
Preparing to unpack .../2-autoconf_2.71-2_all.deb ...
Unpacking autoconf (2.71-2) ...
Selecting previously unselected package autotools-dev.
Preparing to unpack .../3-autotools-dev_20220109.1_all.deb ...
Unpacking autotools-dev (20220109.1) ...
Selecting previously unselected package automake.
Preparing to unpack .../4-automake_1%3a1.16.5-1.3_all.deb ...
Unpacking automake (1:1.16.5-1.3) ...
Selecting previously unselected package libltdl7:amd64.
Preparing to unpack .../5-libltdl7_2.4.6-15build2_amd64.deb ...
Unpacking libltdl7:amd64 (2.4.6-15build2) ...
Selecting previously unselected package libltdl-dev:amd64.
Preparing to unpack .../6-libltdl-dev_2.4.6-15build2_amd64.deb ...
Unpacking libltdl-dev:amd64 (2.4.6-15build2) ...
Selecting previously unselected package libtool.
Preparing to unpack .../7-libtool_2.4.6-15build2_all.deb ...
Unpacking libtool (2.4.6-15build2) ...
Setting up autotools-dev (20220109.1) ...
Setting up libsigsegv2:amd64 (2.13-1ubuntu3) ...
Setting up libltdl7:amd64 (2.4.6-15build2) ...
Setting up libtool (2.4.6-15build2) ...
Setting up m4 (1.4.18-5ubuntu2) ...
Setting up autoconf (2.71-2) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/automake.1.gz because associated file /usr/share/man/man1/automake-1.16.1.gz (of link group automake) doesn't exist
update-alternatives: warning: skip creation of /usr/share/man/man1/aclocal.1.gz because associated file /usr/share/man/man1/aclocal-1.16.1.gz (of link group automake) doesn't exist
Setting up libltdl-dev:amd64 (2.4.6-15build2) ...
Processing triggers for libc-bin (2.35-0ubuntu3.10) ...
↓ 63 lines
ASSISTANT
Show reasoning

Now I need to configure and compile jq with musl. I'll need to:
1. Create a result directory
2. Configure jq to use musl-gcc and build it statically
3. Install it to /home/peter/result
4. Create a symlink from /home/peter/result/jq to the binary

Let me configure jq with musl. I need to use CFLAGS and LDFLAGS to ensure static linking with musl.

compile-bench> mkdir -p /home/peter/result
[empty output]
ASSISTANT
Show reasoning

Now I need to configure and compile jq with musl. The key is to use the musl cross-compiler (musl-gcc) instead of the default gcc. I'll need to:

1. Go into the jq source directory
2. Configure it with musl cross-compiler flags
3. Compile it
4. Install it to /home/peter/result
5. Create a symlink from /home/peter/result/jq to the binary

The configure script should be told to use musl-gcc. I need to set CC=musl-gcc and potentially other flags to ensure static linking with musl.

Let me configure the build with musl:

compile-bench> cd /home/peter/jq-1.8.1 && ./configure CC=musl-gcc CFLAGS="-static" LDFLAGS="-static" --prefix=/home/peter/result --disable-shared --enable-static 2>&1 | tail -50
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if musl-gcc supports -fno-rtti -fno-exceptions... no
checking for musl-gcc option to produce PIC... -fPIC -DPIC
checking if musl-gcc PIC flag -fPIC -DPIC works... yes
checking if musl-gcc static flag -static works... yes
checking if musl-gcc supports -c -o file.o... yes
checking if musl-gcc supports -c -o file.o... (cached) yes
checking whether the musl-gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... no
checking whether to build static libraries... yes
checking whether make sets $(MAKE)... (cached) yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking for sys/times.h... yes
checking size of int... 4
checking size of long... 8
checking size of long long... 8
checking size of void*... 8
checking for size_t... yes
checking for working alloca.h... yes
checking for alloca... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating test/Makefile
config.status: creating sample/Makefile
config.status: creating onig-config
config.status: creating src/config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default commands
↓ 51 lines
ASSISTANT
Show reasoning

Good, the configure completed successfully. Now I need to build the jq package using make and install it to the result directory.

compile-bench> cd /home/peter/jq-1.8.1 && make -j$(nproc) 2>&1 | tail -100
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT iso8859_9.lo -MD -MP -MF .deps/iso8859_9.Tpo -c -o iso8859_9.lo iso8859_9.c
mv -f .deps/iso8859_3.Tpo .deps/iso8859_3.Plo
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT iso8859_5.lo -MD -MP -MF .deps/iso8859_5.Tpo -c iso8859_5.c -o iso8859_5.o
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT iso8859_10.lo -MD -MP -MF .deps/iso8859_10.Tpo -c -o iso8859_10.lo iso8859_10.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT iso8859_6.lo -MD -MP -MF .deps/iso8859_6.Tpo -c iso8859_6.c -o iso8859_6.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT iso8859_7.lo -MD -MP -MF .deps/iso8859_7.Tpo -c iso8859_7.c -o iso8859_7.o
mv -f .deps/iso8859_4.Tpo .deps/iso8859_4.Plo
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT iso8859_8.lo -MD -MP -MF .deps/iso8859_8.Tpo -c iso8859_8.c -o iso8859_8.o
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT iso8859_11.lo -MD -MP -MF .deps/iso8859_11.Tpo -c -o iso8859_11.lo iso8859_11.c
mv -f .deps/iso8859_5.Tpo .deps/iso8859_5.Plo
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT iso8859_13.lo -MD -MP -MF .deps/iso8859_13.Tpo -c -o iso8859_13.lo iso8859_13.c
mv -f .deps/iso8859_6.Tpo .deps/iso8859_6.Plo
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT iso8859_9.lo -MD -MP -MF .deps/iso8859_9.Tpo -c iso8859_9.c -o iso8859_9.o
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT iso8859_14.lo -MD -MP -MF .deps/iso8859_14.Tpo -c -o iso8859_14.lo iso8859_14.c
mv -f .deps/iso8859_8.Tpo .deps/iso8859_8.Plo
mv -f .deps/iso8859_7.Tpo .deps/iso8859_7.Plo
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT iso8859_15.lo -MD -MP -MF .deps/iso8859_15.Tpo -c -o iso8859_15.lo iso8859_15.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT iso8859_16.lo -MD -MP -MF .deps/iso8859_16.Tpo -c -o iso8859_16.lo iso8859_16.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT iso8859_10.lo -MD -MP -MF .deps/iso8859_10.Tpo -c iso8859_10.c -o iso8859_10.o
mv -f .deps/iso8859_9.Tpo .deps/iso8859_9.Plo
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT euc_tw.lo -MD -MP -MF .deps/euc_tw.Tpo -c -o euc_tw.lo euc_tw.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT iso8859_11.lo -MD -MP -MF .deps/iso8859_11.Tpo -c iso8859_11.c -o iso8859_11.o
mv -f .deps/iso8859_10.Tpo .deps/iso8859_10.Plo
mv -f .deps/regparse.Tpo .deps/regparse.Plo
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT euc_kr.lo -MD -MP -MF .deps/euc_
[command output truncated]
 sjis.lo sjis_prop.lo iso8859_1.lo iso8859_2.lo iso8859_3.lo iso8859_4.lo iso8859_5.lo iso8859_6.lo iso8859_7.lo iso8859_8.lo iso8859_9.lo iso8859_10.lo iso8859_11.lo iso8859_13.lo iso8859_14.lo iso8859_15.lo iso8859_16.lo euc_tw.lo euc_kr.lo big5.lo gb18030.lo koi8_r.lo cp1251.lo onig_init.lo  
libtool: link: ar cr .libs/libonig.a  regparse.o regcomp.o regexec.o regenc.o regerror.o regext.o regsyntax.o regtrav.o regversion.o st.o reggnu.o unicode.o unicode_unfold_key.o unicode_fold1_key.o unicode_fold2_key.o unicode_fold3_key.o ascii.o utf8.o utf16_be.o utf16_le.o utf32_be.o utf32_le.o euc_jp.o euc_jp_prop.o sjis.o sjis_prop.o iso8859_1.o iso8859_2.o iso8859_3.o iso8859_4.o iso8859_5.o iso8859_6.o iso8859_7.o iso8859_8.o iso8859_9.o iso8859_10.o iso8859_11.o iso8859_13.o iso8859_14.o iso8859_15.o iso8859_16.o euc_tw.o euc_kr.o big5.o gb18030.o koi8_r.o cp1251.o onig_init.o
libtool: link: ranlib .libs/libonig.a
libtool: link: ( cd ".libs" && rm -f "libonig.la" && ln -s "../libonig.la" "libonig.la" )
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making all in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making all in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
sed -e 's,[@]datadir[@],/home/peter/result/share,g' -e 's,[@]datarootdir[@],/home/peter/result/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/home/peter/result,g' -e 's,[@]exec_prefix[@],/home/peter/result,g' -e 's,[@]libdir[@],/home/peter/result/lib,g' -e 's,[@]includedir[@],/home/peter/result/include,g' < ./oniguruma.pc.in > oniguruma.pc
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
  CC       src/builtin.lo
  CC       src/bytecode.lo
  CC       src/compile.lo
  CC       src/execute.lo
  CC       src/jq_test.lo
  CC       src/jv.lo
  CC       src/jv_alloc.lo
  CC       src/jv_aux.lo
  CC       src/jv_dtoa.lo
  CC       src/jv_file.lo
  CC       src/jv_parse.lo
  CC       src/jv_print.lo
  CC       src/jv_unicode.lo
  CC       src/linker.lo
  CC       src/locfile.lo
  CC       src/util.lo
  CC       src/jv_dtoa_tsd.lo
  CC       vendor/decNumber/decContext.lo
  CC       vendor/decNumber/decNumber.lo
  CC       src/lexer.lo
  CC       src/parser.lo
mkdir -p src
  GEN      src/version.h
  CC       src/main.o
  CCLD     libjq.la
  CCLD     jq
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 74 lines
ASSISTANT
Show reasoning

Great! The build completed successfully. Now I need to install it to /home/peter/result and then create a symlink from /home/peter/result/jq to the compiled binary. Let me proceed with the installation.

compile-bench> cd /home/peter/jq-1.8.1 && make install 2>&1 | tail -30
   /home/peter/result/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
 /usr/bin/mkdir -p '/home/peter/result/bin'
  /bin/bash ./libtool   --mode=install /usr/bin/install -c jq '/home/peter/result/bin'
libtool: install: /usr/bin/install -c jq /home/peter/result/bin/jq
 /usr/bin/mkdir -p '/home/peter/result/share/doc/jq'
 /usr/bin/install -c -m 644 README.md NEWS.md COPYING AUTHORS '/home/peter/result/share/doc/jq'
 /usr/bin/mkdir -p '/home/peter/result/include'
 /usr/bin/install -c -m 644 src/jv.h src/jq.h '/home/peter/result/include'
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /usr/bin/install -c -m 644 jq.1 '/home/peter/result/share/man/man1'
 /usr/bin/mkdir -p '/home/peter/result/lib/pkgconfig'
 /usr/bin/install -c -m 644 libjq.pc '/home/peter/result/lib/pkgconfig'
make[3]: Leaving directory '/home/peter/jq-1.8.1'
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 31 lines
ASSISTANT
Show reasoning

Good! The make install completed successfully. Now I need to:
1. Verify the binary is statically linked and uses musl
2. Create a symlink from /home/peter/result/jq to the compiled jq binary

Let me first check the binary to verify it's statically linked and uses musl.

compile-bench> file /home/peter/result/bin/jq
/home/peter/result/bin/jq: ELF 64-bit LSB pie executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib/ld-musl-x86_64.so.1, with debug_info, not stripped
ASSISTANT
Show reasoning

The binary is dynamically linked with musl, but it's not statically linked. I need to make it static. The issue is that the LDFLAGS=-static may not be enough. I need to ensure that the binary is compiled with proper static linking flags. Let me try a different approach - I'll reconfigure and rebuild with better static linking options.

Let me try using LDFLAGS with proper static linking options. The issue might be that I need to use -static-libgcc or other flags to ensure full static linking.

compile-bench> cd /home/peter/jq-1.8.1 && make distclean
Making distclean in vendor/oniguruma
make[1]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making distclean in src
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
test -z "libonig.la" || rm -f libonig.la
rm -f ./so_locations
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f 
test . = "." || test -z "" || rm -f 
rm -f config.h stamp-h1
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -f ./.deps/ascii.Plo
rm -f ./.deps/big5.Plo
rm -f ./.deps/cp1251.Plo
rm -f ./.deps/euc_jp.Plo
rm -f ./.deps/euc_jp_prop.Plo
rm -f ./.deps/euc_kr.Plo
rm -f ./.deps/euc_tw.Plo
rm -f ./.deps/gb18030.Plo
rm -f ./.deps/iso8859_1.Plo
rm -f ./.deps/iso8859_10.Plo
rm -f ./.deps/iso8859_11.Plo
rm -f ./.deps/iso8859_13.Plo
rm -f ./.deps/iso8859_14.Plo
rm -f ./.deps/iso8859_15.Plo
rm -f ./.deps/iso8859_16.Plo
rm -f ./.deps/iso8859_2.Plo
rm -f ./.deps/iso8859_3.Plo
rm -f ./.deps/iso8859_4.Plo
rm -f ./.deps/iso8859_5.Plo
rm -f ./.deps/iso8859_6.Plo
rm -f ./.deps/iso8859_7.Plo
rm -f ./.deps/iso8859_8.Plo
rm -f ./.deps/iso8859_9.Plo
rm -f ./.deps/koi8_r.Plo
rm -f ./.deps/onig_init.Plo
rm -f ./.deps/regcomp.Plo
rm -f ./.deps/regenc.Plo
rm -f ./.deps/regerror.Plo
rm -f ./.deps/regexec.Plo
rm -f ./.deps/regext.Plo
rm -f ./.deps/reggnu.Plo
rm -f ./.deps/regparse.Plo
rm -f ./.deps/regposerr.Plo
rm -f ./.deps/regposix.Plo
rm -f ./.deps/regsyntax.Plo
rm -f ./.deps/regtrav.Plo
rm -f ./.deps/regversion.Plo
rm -f ./.deps/sjis.Plo
rm -f ./.deps/sjis_prop.Plo
rm -f ./.deps/st.Plo
rm -f ./.deps/unicode.Plo
rm -f ./.deps/unicode_fold1_key.Plo
rm -f ./.deps/unicode_fold2_key.Plo
rm -f ./.deps/unicode_fold3_key.Plo
rm -f ./.deps/unicode_unfold_key.Plo
rm -f ./.deps/utf16_be.Plo
rm -f ./.deps/utf16_le.Plo
rm -f ./.deps/utf32_be.Plo
rm -f ./.deps/utf32_le.Plo
rm -f ./.deps/utf8.Plo
rm -f Makefile
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making distclean in test
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
 rm -f test_utf8 test_syntax test_options testc testcu test_regset test_back
rm -rf .libs _libs
[command output truncated]
rm -f ./.deps/user_property.Po
rm -f Makefile
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
rm -rf .libs _libs
rm -f *.lo
test -z "onig-config" || rm -f onig-config
test . = "." || test -z "" || rm -f 
test -z "oniguruma.pc" || rm -f oniguruma.pc
rm -f libtool config.lt
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -f cscope.out cscope.in.out cscope.po.out cscope.files
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
rm -f config.status config.cache config.log configure.lineno config.status.lineno
rm -f Makefile
make[1]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Entering directory '/home/peter/jq-1.8.1'
 rm -f jq
test -z "src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1" || rm -f src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1
test -z "libjq.la " || rm -f libjq.la 
rm -f ./so_locations
rm -rf .libs _libs
rm -rf src/.libs src/_libs
rm -rf vendor/decNumber/.libs vendor/decNumber/_libs
rm -f *.o
rm -f src/*.o
rm -f src/*.lo
rm -f vendor/decNumber/*.o
rm -f vendor/decNumber/*.lo
test -z "tests/mantest.log tests/jqtest.log tests/shtest.log tests/utf8test.log tests/base64test.log tests/uritest.log tests/optionaltest.log tests/onigtest.log tests/manonigtest.log" || rm -f tests/mantest.log tests/jqtest.log tests/shtest.log tests/utf8test.log tests/base64test.log tests/uritest.log tests/optionaltest.log tests/onigtest.log tests/manonigtest.log
test -z "tests/mantest.trs tests/jqtest.trs tests/shtest.trs tests/utf8test.trs tests/base64test.trs tests/uritest.trs tests/optionaltest.trs tests/onigtest.trs tests/manonigtest.trs" || rm -f tests/mantest.trs tests/jqtest.trs tests/shtest.trs tests/utf8test.trs tests/base64test.trs tests/uritest.trs tests/optionaltest.trs tests/onigtest.trs tests/manonigtest.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
rm -f *.tab.c
test -z "libjq.pc" || rm -f libjq.pc
test . = "." || test -z "" || rm -f 
rm -f src/.deps/.dirstamp
rm -f src/.dirstamp
rm -f vendor/decNumber/.deps/.dirstamp
rm -f vendor/decNumber/.dirstamp
rm -f libtool config.lt
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -f cscope.out cscope.in.out cscope.po.out cscope.files
make[1]: Leaving directory '/home/peter/jq-1.8.1'
rm -f config.status config.cache config.log configure.lineno config.status.lineno
rm -f src/.deps/builtin.Plo
rm -f src/.deps/bytecode.Plo
rm -f src/.deps/compile.Plo
rm -f src/.deps/execute.Plo
rm -f src/.deps/inject_errors.Plo
rm -f src/.deps/jq_test.Plo
rm -f src/.deps/jv.Plo
rm -f src/.deps/jv_alloc.Plo
rm -f src/.deps/jv_aux.Plo
rm -f src/.deps/jv_dtoa.Plo
rm -f src/.deps/jv_dtoa_tsd.Plo
rm -f src/.deps/jv_file.Plo
rm -f src/.deps/jv_parse.Plo
rm -f src/.deps/jv_print.Plo
rm -f src/.deps/jv_unicode.Plo
rm -f src/.deps/lexer.Plo
rm -f src/.deps/linker.Plo
rm -f src/.deps/locfile.Plo
rm -f src/.deps/main.Po
rm -f src/.deps/parser.Plo
rm -f src/.deps/util.Plo
rm -f vendor/decNumber/.deps/decContext.Plo
rm -f vendor/decNumber/.deps/decNumber.Plo
rm -f Makefile
↓ 141 lines
ASSISTANT
Show reasoning

The binary is dynamically linked to musl, not statically linked. I need to reconfigure with proper flags to make it fully static. Let me try a different approach with better LDFLAGS to ensure everything is statically linked.

I should configure with options that force static linking of everything. The issue is that even though I passed CFLAGS="-static" and LDFLAGS="-static", the binary is still showing as dynamically linked with /lib/ld-musl-x86_64.so.1 as the interpreter.

For a truly static binary with musl, I might need to use -static more carefully. Let me try reconfiguring with additional flags or using a different approach.

Actually, looking at the file output again:
```
/home/peter/result/bin/jq: ELF 64-bit LSB pie executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib/ld-musl-x86_64.so.1, with debug_info, not stripped
```

This shows it's using musl's dynamic linker. A truly static binary shouldn't have an interpreter at all. I need to rebuild with different flags.

Let me try reconfiguring with -static in LDFLAGS and also possibly in CFLAGS, and maybe disable PIE (Position Independent Executable).

compile-bench> cd /home/peter/jq-1.8.1 && ./configure CC=musl-gcc CFLAGS="-static -fPIC" LDFLAGS="-static" --prefix=/home/peter/result --disable-shared --enable-static 2>&1 | tail -20
checking for unistd.h... (cached) yes
checking for sys/times.h... yes
checking size of int... 4
checking size of long... 8
checking size of long long... 8
checking size of void*... 8
checking for size_t... yes
checking for working alloca.h... yes
checking for alloca... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating test/Makefile
config.status: creating sample/Makefile
config.status: creating onig-config
config.status: creating src/config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default commands
↓ 21 lines
ASSISTANT
Show reasoning

Now I need to compile with the reconfigured settings. Let me run make again with the proper LDFLAGS for static linking.

compile-bench> cd /home/peter/jq-1.8.1 && make -j$(nproc) LDFLAGS="-static" 2>&1 | tail -50
mv -f .deps/gb18030.Tpo .deps/gb18030.Plo
mv -f .deps/cp1251.Tpo .deps/cp1251.Plo
mv -f .deps/koi8_r.Tpo .deps/koi8_r.Plo
mv -f .deps/onig_init.Tpo .deps/onig_init.Plo
/bin/bash ../libtool  --tag=CC   --mode=link musl-gcc -Wall   -static -fPIC  -version-info 10:0:5  -static -o libonig.la -rpath /home/peter/result/lib regparse.lo regcomp.lo regexec.lo regenc.lo regerror.lo regext.lo regsyntax.lo regtrav.lo regversion.lo st.lo reggnu.lo  unicode.lo unicode_unfold_key.lo unicode_fold1_key.lo unicode_fold2_key.lo unicode_fold3_key.lo ascii.lo utf8.lo utf16_be.lo utf16_le.lo utf32_be.lo utf32_le.lo euc_jp.lo euc_jp_prop.lo sjis.lo sjis_prop.lo iso8859_1.lo iso8859_2.lo iso8859_3.lo iso8859_4.lo iso8859_5.lo iso8859_6.lo iso8859_7.lo iso8859_8.lo iso8859_9.lo iso8859_10.lo iso8859_11.lo iso8859_13.lo iso8859_14.lo iso8859_15.lo iso8859_16.lo euc_tw.lo euc_kr.lo big5.lo gb18030.lo koi8_r.lo cp1251.lo onig_init.lo  
libtool: link: ar cr .libs/libonig.a  regparse.o regcomp.o regexec.o regenc.o regerror.o regext.o regsyntax.o regtrav.o regversion.o st.o reggnu.o unicode.o unicode_unfold_key.o unicode_fold1_key.o unicode_fold2_key.o unicode_fold3_key.o ascii.o utf8.o utf16_be.o utf16_le.o utf32_be.o utf32_le.o euc_jp.o euc_jp_prop.o sjis.o sjis_prop.o iso8859_1.o iso8859_2.o iso8859_3.o iso8859_4.o iso8859_5.o iso8859_6.o iso8859_7.o iso8859_8.o iso8859_9.o iso8859_10.o iso8859_11.o iso8859_13.o iso8859_14.o iso8859_15.o iso8859_16.o euc_tw.o euc_kr.o big5.o gb18030.o koi8_r.o cp1251.o onig_init.o
libtool: link: ranlib .libs/libonig.a
libtool: link: ( cd ".libs" && rm -f "libonig.la" && ln -s "../libonig.la" "libonig.la" )
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making all in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making all in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
sed -e 's,[@]datadir[@],/home/peter/result/share,g' -e 's,[@]datarootdir[@],/home/peter/result/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/home/peter/result,g' -e 's,[@]exec_prefix[@],/home/peter/result,g' -e 's,[@]libdir[@],/home/peter/result/lib,g' -e 's,[@]includedir[@],/home/peter/result/include,g' < ./oniguruma.pc.in > oniguruma.pc
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
  GEN      jq.1
  CC       src/builtin.lo
  CC       src/bytecode.lo
  CC       src/compile.lo
  CC       src/execute.lo
  CC       src/jq_test.lo
  CC       src/jv.lo
  CC       src/jv_alloc.lo
  CC       src/jv_aux.lo
  CC       src/jv_dtoa.lo
  CC       src/jv_file.lo
  CC       src/jv_parse.lo
  CC       src/jv_print.lo
  CC       src/jv_unicode.lo
  CC       src/linker.lo
  CC       src/locfile.lo
  CC       src/util.lo
  CC       src/jv_dtoa_tsd.lo
  CC       vendor/decNumber/decContext.lo
  CC       vendor/decNumber/decNumber.lo
  CC       src/lexer.lo
  CC       src/parser.lo
  CC       src/main.o
  CCLD     libjq.la
  CCLD     jq
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 51 lines
ASSISTANT
Show reasoning

Good, the make is complete. Now let me check the binary to see if it's statically linked. I'll run file on it to check.

compile-bench> file /home/peter/jq-1.8.1/jq
/home/peter/jq-1.8.1/jq: ELF 64-bit LSB pie executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib/ld-musl-x86_64.so.1, with debug_info, not stripped
ASSISTANT
Show reasoning

The binary is still dynamically linked with musl. Let me check the libtool link command more carefully. The issue is that libtool is not properly applying the static linking flags. Let me try a different approach - I'll manually link the jq binary with static flags using the object files directly.

First, let me check what the actual link command is in the generated Makefile.

compile-bench> grep -A 5 "CCLD.*jq" /home/peter/jq-1.8.1/src/Makefile | head -20
grep: /home/peter/jq-1.8.1/src/Makefile: No such file or directory
ASSISTANT
Show reasoning

The distclean removed the Makefile. Let me reconfigure and try a different approach. I need to modify the configure or build to ensure static linking. Let me check the actual link command being used by examining the libtool configuration.

Actually, let me try a different approach - I'll use musl-gcc with explicit static flags and ensure all linking is static by using -all-static or similar flags.

Let me reconfigure and look at how to properly pass the static flags to the linker.

compile-bench> cd /home/peter/jq-1.8.1 && ./configure CC=musl-gcc --prefix=/home/peter/result --disable-shared --enable-static 2>&1 | tail -5
config.status: creating src/config.h
config.status: src/config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default commands
↓ 6 lines
ASSISTANT
Show reasoning

Let me check what the actual linking command is. I'll look at the Makefile to understand how to properly link jq statically.

compile-bench> cd /home/peter/jq-1.8.1 && cat src/Makefile | grep -A 10 "^jq:"
cat: src/Makefile: No such file or directory
ASSISTANT
Show reasoning

The file doesn't exist. Let me check what files are in the directory.

compile-bench> ls -la /home/peter/jq-1.8.1/ | head -20
total 2932
drwxr-xr-x 10 peter peter    4096 Oct 15 18:03 .
drwxr-x---  1 peter peter    4096 Oct 15 18:02 ..
drwxr-xr-x  2 peter peter    4096 Oct 15 18:03 .libs
-rw-r--r--  1 peter peter       0 Oct 15 18:03 .remake-version-h
-rw-r--r--  1 peter peter   10686 Jul  1 11:39 AUTHORS
-rw-r--r--  1 peter peter    7887 Jul  1 11:39 COPYING
-rw-r--r--  1 peter peter   33286 Jul  1 11:39 ChangeLog
-rw-r--r--  1 peter peter   75008 Oct 15 18:03 Makefile
-rw-r--r--  1 peter peter    9090 Jul  1 11:39 Makefile.am
-rw-r--r--  1 peter peter   75461 Jul  1 11:39 Makefile.in
-rw-r--r--  1 peter peter   24670 Jul  1 11:39 NEWS.md
-rw-r--r--  1 peter peter    2434 Jul  1 11:39 README.md
-rw-r--r--  1 peter peter   46459 Jul  1 11:39 aclocal.m4
drwxr-xr-x  3 peter peter    4096 Jul  1 11:40 config
-rw-r--r--  1 peter peter  100501 Oct 15 18:03 config.log
-rwxr-xr-x  1 peter peter   57810 Oct 15 18:03 config.status
-rwxr-xr-x  1 peter peter  665647 Jul  1 11:39 configure
-rw-r--r--  1 peter peter    9881 Jul  1 11:39 configure.ac
drwxr-xr-x  5 peter peter    4096 Jul  1 11:40 docs
↓ 21 lines
ASSISTANT
Show reasoning

The distclean removed all the Makefiles. Let me reconfigure to get them back.

compile-bench> cd /home/peter/jq-1.8.1 && cat src/Makefile 2>&1 | grep -A 10 "^jq:" | head -15
[empty output]
ASSISTANT
Show reasoning

The Makefile doesn't seem to exist in src/. Let me check if the build worked properly. Let me check what happened:

compile-bench> cd /home/peter/jq-1.8.1 && make clean && rm -rf .libs && make distclean 2>&1 | tail -5
Making clean in vendor/oniguruma
make[1]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making clean in src
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
test -z "libonig.la" || rm -f libonig.la
rm -f ./so_locations
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making clean in test
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
 rm -f test_utf8 test_syntax test_options testc testcu test_regset test_back
rm -rf .libs _libs
rm -f *.o
test -z "test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log" || rm -f test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log
test -z "test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs" || rm -f test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making clean in sample
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
 rm -f encode listcap names simple sql syntax user_property callout echo count bug_fix regset scan callback_each_match
rm -rf .libs _libs
rm -f *.o
test -z "encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log" || rm -f encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log
test -z "encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs" || rm -f encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Entering directory '/home/peter/jq-1.8.1'
 rm -f jq
test -z "src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1" || rm -f src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1
test -z "libjq.la " || rm -f libjq.la 
rm -f ./so_locations
rm -rf .libs _libs
rm -rf src/.libs src/_libs
rm -rf vendor/decNumber/.libs vendor/decNumber/_libs
rm -f *.o
rm -f src/*.o
rm -f src/*.lo
rm -f vendor/decNumber/*.o
rm -f vendor/decNumber/*.lo
test -z "tests/mantest.log tests/jqtest.log tests/shtest.log tests/utf8test.log tests/base64test.log tests/uritest.log tests/optionaltest.log tests/onigtest.log tests/manonigtest.log" || rm -f tests/mantest.log tests/jqtest.log tests/shtest.log tests/utf8test.log tests/base64test.log tests/uritest.log tests/optionaltest.log tests/onigtest.log tests/manonigtest.log
test -z "tests/mantest.trs tests/jqtest.trs tests/shtest.trs tests/utf8test.trs tests/base64test.trs tests/uritest.trs tests/optionaltest.trs tests/onigtest.trs tests/manonigtest.trs" || rm -f tests/mantest.trs tests/jqtest.trs tests/shtest.trs tests/utf8test.trs tests/base64test.trs tests/uritest.trs tests/optionaltest.trs tests/onigtest.trs tests/manonigtest.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[1]: Leaving directory '/home/peter/jq-1.8.1'
rm -f src/.deps/parser.Plo
rm -f src/.deps/util.Plo
rm -f vendor/decNumber/.deps/decContext.Plo
rm -f vendor/decNumber/.deps/decNumber.Plo
rm -f Makefile
↓ 59 lines
ASSISTANT
Show reasoning

The user wants me to compile jq with musl and create a statically linked binary. Let me reconfigure and build with the proper flags to ensure it's statically linked.

I should use the proper configure flags and make sure all the linking is done with -static. Let me try a different approach - maybe I need to force all libraries to be linked statically.

compile-bench> cd /home/peter/jq-1.8.1 && ./configure CC=musl-gcc CFLAGS="-static" CXXFLAGS="-static" LDFLAGS="-static -all-static" --prefix=/home/peter/result --disable-shared --enable-static 2>&1 | tail -5
checking for gcc... musl-gcc
checking whether the C compiler works... no
configure: error: in `/home/peter/jq-1.8.1':
configure: error: C compiler cannot create executables
See `config.log' for more details
↓ 6 lines
ASSISTANT
Show reasoning

The -all-static flag is causing issues with the compiler test. Let me try a different approach - using -static in LDFLAGS but without -all-static:

compile-bench> cd /home/peter/jq-1.8.1 && ./configure CC=musl-gcc CFLAGS="-static" LDFLAGS="-static" --prefix=/home/peter/result --disable-shared --enable-static 2>&1 | tail -5
config.status: creating onig-config
config.status: creating src/config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default commands
↓ 6 lines
ASSISTANT
Show reasoning

Good, the configure step succeeded. Now let me check the generated Makefile to see what linker flags are being used for the jq binary.

compile-bench> cd /home/peter/jq-1.8.1 && cat Makefile | grep -A 15 "^jq:" | head -20
[empty output]
ASSISTANT
Show reasoning

Let me check the Makefile more carefully to understand how jq is being built.

compile-bench> cd /home/peter/jq-1.8.1 && grep "jq\$(EXEEXT)" Makefile
bin_PROGRAMS = jq$(EXEEXT)
jq$(EXEEXT): $(jq_OBJECTS) $(jq_DEPENDENCIES) $(EXTRA_jq_DEPENDENCIES) 
	@rm -f jq$(EXEEXT)
↓ 4 lines
ASSISTANT
Show reasoning

Let me check what the full link command looks like by examining the Makefile more carefully, or by looking at the build command when we make it with verbose output.

compile-bench> cd /home/peter/jq-1.8.1 && grep -A 2 "jq\$(EXEEXT):" Makefile
jq$(EXEEXT): $(jq_OBJECTS) $(jq_DEPENDENCIES) $(EXTRA_jq_DEPENDENCIES) 
	@rm -f jq$(EXEEXT)
	$(AM_V_CCLD)$(jq_LINK) $(jq_OBJECTS) $(jq_LDADD) $(LIBS)
↓ 4 lines
ASSISTANT
Show reasoning

Let me check what jq_LINK is set to. It's likely a libtool link command. I need to see if LIBS includes the static flag or if I need to modify something.

compile-bench> cd /home/peter/jq-1.8.1 && grep "^jq_LINK" Makefile
jq_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
ASSISTANT
Show reasoning

The issue is that the binary is being compiled with PIE (Position Independent Executable) enabled by default, which means it's not fully static. Let me check the LDFLAGS and see if we need to disable PIE.

Let me try to build with -no-pie flag to disable PIE.

compile-bench> cd /home/peter/jq-1.8.1 && make distclean && ./configure CC=musl-gcc CFLAGS="-static -fno-PIE" LDFLAGS="-static -no-pie" --prefix=/home/peter/result --disable-shared --enable-static 2>&1 | tail -5
Making distclean in vendor/oniguruma
make[1]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making distclean in src
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
test -z "libonig.la" || rm -f libonig.la
rm -f ./so_locations
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f 
test . = "." || test -z "" || rm -f 
rm -f config.h stamp-h1
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -f ./.deps/ascii.Plo
rm -f ./.deps/big5.Plo
rm -f ./.deps/cp1251.Plo
rm -f ./.deps/euc_jp.Plo
rm -f ./.deps/euc_jp_prop.Plo
rm -f ./.deps/euc_kr.Plo
rm -f ./.deps/euc_tw.Plo
rm -f ./.deps/gb18030.Plo
rm -f ./.deps/iso8859_1.Plo
rm -f ./.deps/iso8859_10.Plo
rm -f ./.deps/iso8859_11.Plo
rm -f ./.deps/iso8859_13.Plo
rm -f ./.deps/iso8859_14.Plo
rm -f ./.deps/iso8859_15.Plo
rm -f ./.deps/iso8859_16.Plo
rm -f ./.deps/iso8859_2.Plo
rm -f ./.deps/iso8859_3.Plo
rm -f ./.deps/iso8859_4.Plo
rm -f ./.deps/iso8859_5.Plo
rm -f ./.deps/iso8859_6.Plo
rm -f ./.deps/iso8859_7.Plo
rm -f ./.deps/iso8859_8.Plo
rm -f ./.deps/iso8859_9.Plo
rm -f ./.deps/koi8_r.Plo
rm -f ./.deps/onig_init.Plo
rm -f ./.deps/regcomp.Plo
rm -f ./.deps/regenc.Plo
rm -f ./.deps/regerror.Plo
rm -f ./.deps/regexec.Plo
rm -f ./.deps/regext.Plo
rm -f ./.deps/reggnu.Plo
rm -f ./.deps/regparse.Plo
rm -f ./.deps/regposerr.Plo
rm -f ./.deps/regposix.Plo
rm -f ./.deps/regsyntax.Plo
rm -f ./.deps/regtrav.Plo
rm -f ./.deps/regversion.Plo
rm -f ./.deps/sjis.Plo
rm -f ./.deps/sjis_prop.Plo
rm -f ./.deps/st.Plo
rm -f ./.deps/unicode.Plo
rm -f ./.deps/unicode_fold1_key.Plo
rm -f ./.deps/unicode_fold2_key.Plo
rm -f ./.deps/unicode_fold3_key.Plo
rm -f ./.deps/unicode_unfold_key.Plo
rm -f ./.deps/utf16_be.Plo
rm -f ./.deps/utf16_le.Plo
rm -f ./.deps/utf32_be.Plo
rm -f ./.deps/utf32_le.Plo
rm -f ./.deps/utf8.Plo
rm -f Makefile
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making distclean in test
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
 rm -f test_utf8 test_syntax test_options testc testcu test_regset test_back
rm -rf .libs _libs
[command output truncated]
rm -f *.lo
test -z "onig-config" || rm -f onig-config
test . = "." || test -z "" || rm -f 
test -z "oniguruma.pc" || rm -f oniguruma.pc
rm -f libtool config.lt
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -f cscope.out cscope.in.out cscope.po.out cscope.files
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
rm -f config.status config.cache config.log configure.lineno config.status.lineno
rm -f Makefile
make[1]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Entering directory '/home/peter/jq-1.8.1'
 rm -f jq
test -z "src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1" || rm -f src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1
test -z "libjq.la " || rm -f libjq.la 
rm -f ./so_locations
rm -rf .libs _libs
rm -rf src/.libs src/_libs
rm -rf vendor/decNumber/.libs vendor/decNumber/_libs
rm -f *.o
rm -f src/*.o
rm -f src/*.lo
rm -f vendor/decNumber/*.o
rm -f vendor/decNumber/*.lo
test -z "tests/mantest.log tests/jqtest.log tests/shtest.log tests/utf8test.log tests/base64test.log tests/uritest.log tests/optionaltest.log tests/onigtest.log tests/manonigtest.log" || rm -f tests/mantest.log tests/jqtest.log tests/shtest.log tests/utf8test.log tests/base64test.log tests/uritest.log tests/optionaltest.log tests/onigtest.log tests/manonigtest.log
test -z "tests/mantest.trs tests/jqtest.trs tests/shtest.trs tests/utf8test.trs tests/base64test.trs tests/uritest.trs tests/optionaltest.trs tests/onigtest.trs tests/manonigtest.trs" || rm -f tests/mantest.trs tests/jqtest.trs tests/shtest.trs tests/utf8test.trs tests/base64test.trs tests/uritest.trs tests/optionaltest.trs tests/onigtest.trs tests/manonigtest.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
rm -f *.tab.c
test -z "libjq.pc" || rm -f libjq.pc
test . = "." || test -z "" || rm -f 
rm -f src/.deps/.dirstamp
rm -f src/.dirstamp
rm -f vendor/decNumber/.deps/.dirstamp
rm -f vendor/decNumber/.dirstamp
rm -f libtool config.lt
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -f cscope.out cscope.in.out cscope.po.out cscope.files
make[1]: Leaving directory '/home/peter/jq-1.8.1'
rm -f config.status config.cache config.log configure.lineno config.status.lineno
rm -f src/.deps/builtin.Plo
rm -f src/.deps/bytecode.Plo
rm -f src/.deps/compile.Plo
rm -f src/.deps/execute.Plo
rm -f src/.deps/inject_errors.Plo
rm -f src/.deps/jq_test.Plo
rm -f src/.deps/jv.Plo
rm -f src/.deps/jv_alloc.Plo
rm -f src/.deps/jv_aux.Plo
rm -f src/.deps/jv_dtoa.Plo
rm -f src/.deps/jv_dtoa_tsd.Plo
rm -f src/.deps/jv_file.Plo
rm -f src/.deps/jv_parse.Plo
rm -f src/.deps/jv_print.Plo
rm -f src/.deps/jv_unicode.Plo
rm -f src/.deps/lexer.Plo
rm -f src/.deps/linker.Plo
rm -f src/.deps/locfile.Plo
rm -f src/.deps/main.Po
rm -f src/.deps/parser.Plo
rm -f src/.deps/util.Plo
rm -f vendor/decNumber/.deps/decContext.Plo
rm -f vendor/decNumber/.deps/decNumber.Plo
rm -f Makefile
config.status: creating onig-config
config.status: creating src/config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default commands
↓ 141 lines
ASSISTANT
Show reasoning

Good, the configuration completed. Now let me build it:

compile-bench> cd /home/peter/jq-1.8.1 && make -j$(nproc) 2>&1 | tail -30
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
  GEN      jq.1
  CC       src/builtin.lo
  CC       src/bytecode.lo
  CC       src/compile.lo
  CC       src/execute.lo
  CC       src/jq_test.lo
  CC       src/jv.lo
  CC       src/jv_alloc.lo
  CC       src/jv_aux.lo
  CC       src/jv_dtoa.lo
  CC       src/jv_file.lo
  CC       src/jv_parse.lo
  CC       src/jv_print.lo
  CC       src/jv_unicode.lo
  CC       src/linker.lo
  CC       src/locfile.lo
  CC       src/util.lo
  CC       src/jv_dtoa_tsd.lo
  CC       vendor/decNumber/decContext.lo
  CC       vendor/decNumber/decNumber.lo
  CC       src/lexer.lo
  CC       src/parser.lo
  CC       src/main.o
  CCLD     libjq.la
  CCLD     jq
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 31 lines
ASSISTANT
Show reasoning

Good, the build completed. Now let me check if the binary is statically linked with musl.

compile-bench> file /home/peter/jq-1.8.1/jq && ldd /home/peter/jq-1.8.1/jq
/home/peter/jq-1.8.1/jq: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib/ld-musl-x86_64.so.1, with debug_info, not stripped
/home/peter/jq-1.8.1/jq: error while loading shared libraries: /lib/x86_64-linux-gnu/libc.so: invalid ELF header
↓ 3 lines
ASSISTANT
Show reasoning

The binary is dynamically linked to musl, which is good - it shows /lib/ld-musl-x86_64.so.1 as the interpreter. However, the user wants a statically linked binary. The error is because we're trying to run it with glibc's libraries.

Let me check the actual dependencies of the binary more carefully. The issue is that it still says "dynamically linked". I need to make it completely static.

Let me try a different approach - I need to pass the -static flag properly during linking, not just in CFLAGS and LDFLAGS. The issue might be with how libtool is handling things.

Let me check what libraries the jq executable actually needs:

compile-bench> musl-gcc -static -v /dev/null -o /tmp/test 2>&1 | grep -i static
COLLECT_GCC_OPTIONS='-static' '-v' '-o' '/tmp/test' '-specs=/usr/lib/x86_64-linux-musl/musl-gcc.specs' '-mtune=generic' '-march=x86-64' '-dumpdir' '/tmp/test.'
 /usr/lib/gcc/x86_64-linux-gnu/11/collect2 -plugin /usr/lib/gcc/x86_64-linux-gnu/11/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-linux-gnu/11/lto-wrapper -plugin-opt=-fresolution=/tmp/ccOVAFVf.res -plugin-opt=-pass-through=/usr/lib/gcc/x86_64-linux-gnu/11/libgcc.a -plugin-opt=-pass-through=/usr/lib/gcc/x86_64-linux-gnu/11/libgcc_eh.a -plugin-opt=-pass-through=-lc -dynamic-linker /lib/ld-musl-x86_64.so.1 -nostdlib -static -z relro -o /tmp/test /usr/lib/x86_64-linux-musl/Scrt1.o /usr/lib/x86_64-linux-musl/crti.o /usr/lib/gcc/x86_64-linux-gnu/11/crtbeginS.o -L/usr/lib/x86_64-linux-musl -L /usr/lib/gcc/x86_64-linux-gnu/11/. /dev/null --start-group /usr/lib/gcc/x86_64-linux-gnu/11/libgcc.a /usr/lib/gcc/x86_64-linux-gnu/11/libgcc_eh.a -lc --end-group /usr/lib/gcc/x86_64-linux-gnu/11/crtendS.o /usr/lib/x86_64-linux-musl/crtn.o
↓ 3 lines
ASSISTANT
Show reasoning

I see the issue now. The musl-gcc is using the native x86_64-linux-gnu collect2 which is trying to link with glibc. The problem is that it's using -dynamic-linker /lib/ld-musl-x86_64.so.1 but still trying to link with glibc. The -lc link is happening after the dynamic linker is set.

Let me check the musl-gcc specs file to understand how it's configured:

compile-bench> cat /usr/lib/x86_64-linux-musl/musl-gcc.specs
%rename cpp_options old_cpp_options

*cpp_options:
-nostdinc -isystem /usr/include/x86_64-linux-musl -isystem include%s %(old_cpp_options)

*cc1:
%(cc1_cpu) -nostdinc -isystem /usr/include/x86_64-linux-musl -isystem include%s

*link_libgcc:
-L/usr/lib/x86_64-linux-musl -L .%s

*libgcc:
libgcc.a%s %:if-exists(libgcc_eh.a%s)

*startfile:
%{!shared: /usr/lib/x86_64-linux-musl/Scrt1.o} /usr/lib/x86_64-linux-musl/crti.o crtbeginS.o%s

*endfile:
crtendS.o%s /usr/lib/x86_64-linux-musl/crtn.o

*link:
-dynamic-linker /lib/ld-musl-x86_64.so.1 -nostdlib %{shared:-shared} %{static:-static} %{rdynamic:-export-dynamic}

*esp_link:


*esp_options:


*esp_cpp_options:
↓ 31 lines
ASSISTANT
Show reasoning

The issue is that even though I'm using -static flag with musl-gcc, the linker is still using the glibc dynamic linker. Looking at the specs file and the collect2 output, I can see it's trying to link with:
- The dynamic linker: -dynamic-linker /lib/ld-musl-x86_64.so.1
- Mixing glibc and musl libraries

The problem might be that I need to ensure all libraries are statically linked. Let me try a different approach - I should use -static flag AND potentially remove -fPIC or other flags that might interfere with static linking.

Actually, looking more carefully at the file output:
```
/home/peter/jq-1.8.1/jq: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib/ld-musl-x86_64.so.1
```

It says "dynamically linked" which means it's not a true static binary. The issue is that libtool might be overriding the static flag. Let me check what libraries jq is trying to link against by looking at the Makefile or adding verbose output.

Actually, I should try to look at what the actual link command is being executed. Let me check the verbose build output or examine what libraries are being linked.

Let me try a different approach - manually compile with explicit static flags and see what happens. Or I can check if there are any special requirements for truly static linking with musl.

Actually, wait - I should check if the musl libc static library is installed and accessible:

compile-bench> find /usr -name "libc.a" 2>/dev/null
/usr/lib/x86_64-linux-gnu/libc.a
/usr/lib/x86_64-linux-musl/libc.a
↓ 3 lines
ASSISTANT
Show reasoning

Good, so musl's libc.a is at /usr/lib/x86_64-linux-musl/libc.a. The issue is that when we use musl-gcc -static, it's still trying to use the glibc dynamic loader.

Let me check if the issue is with the linker specs. It seems the problem might be that even with -static, it's still adding -dynamic-linker /lib/ld-musl-x86_64.so.1 which doesn't make sense for a static binary.

Actually, looking at the output again:
```
/home/peter/jq-1.8.1/jq: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib/ld-musl-x86_64.so.1, with debug_info, not stripped
```

This says "dynamically linked" which means it's not static. The binary says it's dynamically linked with musl. But the dependencies need to be resolved differently when running under the glibc system.

Let me try a different approach. Maybe I need to compile a truly static binary by using PIE=0 or adjust the compilation process. Or maybe I need to strip the binary first before testing.

Actually, wait. Let me re-read the error:
```
/home/peter/jq-1.8.1/jq: error while loading shared libraries: /lib/x86_64-linux-gnu/libc.so: invalid ELF header
```

This is strange. It's trying to load glibc even though it says it uses musl. Let me check if there's a library that's being linked that's pulling in glibc.

Let me try a different approach - compile with -static but also check if we need to explicitly link against the musl libc.a.

Actually, I think the issue is that I need to check what libraries are being linked in jq. Let me look at what's actually getting linked.

compile-bench> cd /home/peter/jq-1.8.1 && ldd -v /home/peter/jq-1.8.1/jq 2>&1 | head -40
/home/peter/jq-1.8.1/jq: error while loading shared libraries: /lib/x86_64-linux-gnu/libc.so: invalid ELF header
ASSISTANT
Show reasoning

The issue is that the binary is trying to use /lib/x86_64-linux-gnu/libc.so (glibc) instead of the musl libc. Even though we're using musl-gcc with -static, it's still linking against the wrong libc.

Let me check the actual linking command and see what's happening. The issue is likely in how libtool is handling the static linking.

Let me try a different approach - I'll manually compile and link the jq binary with proper musl static linking.

compile-bench> cd /home/peter/jq-1.8.1 && objdump -p jq | grep -i interpreter
[empty output]
ASSISTANT
Show reasoning

Let me check the readelf output instead to see the interpreter:

compile-bench> readelf -l /home/peter/jq-1.8.1/jq | grep -i "INTERP\|interpreter"
  INTERP         0x0000000000000238 0x0000000000400238 0x0000000000400238
      [Requesting program interpreter: /lib/ld-musl-x86_64.so.1]
   01     .interp 
   02     .interp .hash .gnu.hash .dynsym .dynstr .rela.dyn .rela.plt
↓ 5 lines
ASSISTANT
Show reasoning

The binary is requesting the musl interpreter /lib/ld-musl-x86_64.so.1, but it's still dynamically linked. Let me check what libraries it's trying to link to.

compile-bench> readelf -d /home/peter/jq-1.8.1/jq | grep NEEDED
 0x0000000000000001 (NEEDED)             Shared library: [libc.so]
ASSISTANT
Show reasoning

The issue is that the binary is still dynamically linked to libc. It says it needs libc.so. The problem is that when I use musl-gcc with -static, it's still creating a dynamically linked binary. Let me check what's happening in the linking process.

Looking at the musl-gcc specs, the *link line says:
```
-dynamic-linker /lib/ld-musl-x86_64.so.1 -nostdlib %{shared:-shared} %{static:-static} %{rdynamic:-export-dynamic}
```

So when we pass -static, it should be adding -static to the linker options. But it seems libtool might not be passing the -static flag properly to the final link command.

Let me try a different approach: manually link with the correct flags to ensure everything is statically linked.

compile-bench> cd /home/peter/jq-1.8.1 && cat .libs/jq.link 2>/dev/null || echo "No link file found"
No link file found
ASSISTANT
Show reasoning

The issue is that the binary is still being linked dynamically despite the -static flag. The problem is that libtool is not properly passing the static flag to the link command. Let me check the actual link command that was used.

Let me rebuild and capture the actual linking command, or manually link the binary statically.

First, let me check what object files and libraries we have available.

compile-bench> cd /home/peter/jq-1.8.1 && make distclean && ./configure CC=musl-gcc --prefix=/home/peter/result --disable-shared --enable-static 2>&1 | tail -3 && make V=1 2>&1 | grep -A 5 "^.*jq"
Making distclean in vendor/oniguruma
make[1]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making distclean in src
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
test -z "libonig.la" || rm -f libonig.la
rm -f ./so_locations
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f 
test . = "." || test -z "" || rm -f 
rm -f config.h stamp-h1
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -f ./.deps/ascii.Plo
rm -f ./.deps/big5.Plo
rm -f ./.deps/cp1251.Plo
rm -f ./.deps/euc_jp.Plo
rm -f ./.deps/euc_jp_prop.Plo
rm -f ./.deps/euc_kr.Plo
rm -f ./.deps/euc_tw.Plo
rm -f ./.deps/gb18030.Plo
rm -f ./.deps/iso8859_1.Plo
rm -f ./.deps/iso8859_10.Plo
rm -f ./.deps/iso8859_11.Plo
rm -f ./.deps/iso8859_13.Plo
rm -f ./.deps/iso8859_14.Plo
rm -f ./.deps/iso8859_15.Plo
rm -f ./.deps/iso8859_16.Plo
rm -f ./.deps/iso8859_2.Plo
rm -f ./.deps/iso8859_3.Plo
rm -f ./.deps/iso8859_4.Plo
rm -f ./.deps/iso8859_5.Plo
rm -f ./.deps/iso8859_6.Plo
rm -f ./.deps/iso8859_7.Plo
rm -f ./.deps/iso8859_8.Plo
rm -f ./.deps/iso8859_9.Plo
rm -f ./.deps/koi8_r.Plo
rm -f ./.deps/onig_init.Plo
rm -f ./.deps/regcomp.Plo
rm -f ./.deps/regenc.Plo
rm -f ./.deps/regerror.Plo
rm -f ./.deps/regexec.Plo
rm -f ./.deps/regext.Plo
rm -f ./.deps/reggnu.Plo
rm -f ./.deps/regparse.Plo
rm -f ./.deps/regposerr.Plo
rm -f ./.deps/regposix.Plo
rm -f ./.deps/regsyntax.Plo
rm -f ./.deps/regtrav.Plo
rm -f ./.deps/regversion.Plo
rm -f ./.deps/sjis.Plo
rm -f ./.deps/sjis_prop.Plo
rm -f ./.deps/st.Plo
rm -f ./.deps/unicode.Plo
rm -f ./.deps/unicode_fold1_key.Plo
rm -f ./.deps/unicode_fold2_key.Plo
rm -f ./.deps/unicode_fold3_key.Plo
rm -f ./.deps/unicode_unfold_key.Plo
rm -f ./.deps/utf16_be.Plo
rm -f ./.deps/utf16_le.Plo
rm -f ./.deps/utf32_be.Plo
rm -f ./.deps/utf32_le.Plo
rm -f ./.deps/utf8.Plo
rm -f Makefile
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making distclean in test
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
 rm -f test_utf8 test_syntax test_options testc testcu test_regset test_back
rm -rf .libs _libs
rm -f *.o
test -z "test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log" || rm -f test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log
test -z "test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs" || rm -f test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f 
test . = "." || test -z "" || rm -f 
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -f ./.deps/test_back.Po
rm -f ./.deps/test_options.Po
rm -f ./.deps/test_regset.Po
rm -f ./.deps/test_syntax.Po
rm -f ./.deps/test_utf8.Po
rm -f ./.deps/testc.Po
rm -f ./.deps/testp.Po
rm -f ./.dep
[command output truncated]
1 -DHAVE_DREM=1 -DHAVE_ERF=1 -DHAVE_ERFC=1 -DHAVE_EXP10=1 -DHAVE_EXP2=1 -DHAVE_EXP=1 -DHAVE_EXPM1=1 -DHAVE_FABS=1 -DHAVE_FDIM=1 -DHAVE_FLOOR=1 -DHAVE_FMA=1 -DHAVE_FMAX=1 -DHAVE_FMIN=1 -DHAVE_FMOD=1 -DHAVE_FREXP=1 -DHAVE_HYPOT=1 -DHAVE_J0=1 -DHAVE_J1=1 -DHAVE_JN=1 -DHAVE_LDEXP=1 -DHAVE_LGAMMA=1 -DHAVE_LOG10=1 -DHAVE_LOG1P=1 -DHAVE_LOG2=1 -DHAVE_LOG=1 -DHAVE_LOGB=1 -DHAVE_MODF=1 -DHAVE_LGAMMA_R=1 -DHAVE_NEARBYINT=1 -DHAVE_NEXTAFTER=1 -DHAVE_NEXTTOWARD=1 -DHAVE_POW=1 -DHAVE_REMAINDER=1 -DHAVE_RINT=1 -DHAVE_ROUND=1 -DHAVE_SCALB=1 -DHAVE_SCALBLN=1 -DHAVE_SIGNIFICAND=1 -DHAVE_SCALBN=1 -DHAVE_ILOGB=1 -DHAVE_SIN=1 -DHAVE_SINH=1 -DHAVE_SQRT=1 -DHAVE_TAN=1 -DHAVE_TANH=1 -DHAVE_TGAMMA=1 -DHAVE_TRUNC=1 -DHAVE_Y0=1 -DHAVE_Y1=1 -DHAVE_YN=1 -DHAVE___THREAD=1 -DIEEE_8087=1 -DHAVE_LIBONIG=1 -I. -I./src -I./vendor -Wextra -Wall -Wno-unused-parameter -Wno-unused-function -Woverlength-strings -Wstrict-prototypes -I./vendor/oniguruma/src -g -O2 -pthread -MT src/parser.lo -MD -MP -MF src/.deps/parser.Tpo -c src/parser.c -o src/parser.o
/bin/bash ./libtool  --tag=CC   --mode=link musl-gcc -Wextra -Wall -Wno-unused-parameter -Wno-unused-function -Woverlength-strings -Wstrict-prototypes     -I./vendor/oniguruma/src -g -O2 -pthread -L./vendor/oniguruma/src -Wl,-rpath,/home/peter/result/lib -export-symbols-regex '^j[qv]_' -version-info 1:4:0   -o libjq.la -rpath /home/peter/result/lib src/builtin.lo src/bytecode.lo src/compile.lo src/execute.lo src/jq_test.lo src/jv.lo src/jv_alloc.lo src/jv_aux.lo src/jv_dtoa.lo src/jv_file.lo src/jv_parse.lo src/jv_print.lo src/jv_unicode.lo src/linker.lo src/locfile.lo src/util.lo src/jv_dtoa_tsd.lo vendor/decNumber/decContext.lo vendor/decNumber/decNumber.lo src/lexer.lo src/parser.lo -lm  vendor/oniguruma/src/.libs/libonig.la -lpthread 
libtool: link: ar cr .libs/libjq.a  src/builtin.o src/bytecode.o src/compile.o src/execute.o src/jq_test.o src/jv.o src/jv_alloc.o src/jv_aux.o src/jv_dtoa.o src/jv_file.o src/jv_parse.o src/jv_print.o src/jv_unicode.o src/linker.o src/locfile.o src/util.o src/jv_dtoa_tsd.o vendor/decNumber/decContext.o vendor/decNumber/decNumber.o src/lexer.o src/parser.o
libtool: link: ranlib .libs/libjq.a
libtool: link: ( cd ".libs" && rm -f "libjq.la" && ln -s "../libjq.la" "libjq.la" )
/bin/bash ./libtool  --tag=CC   --mode=link musl-gcc -Wextra -Wall -Wno-unused-parameter -Wno-unused-function -Woverlength-strings -Wstrict-prototypes     -I./vendor/oniguruma/src -g -O2 -pthread   -o jq src/main.o libjq.la -lm vendor/oniguruma/src/.libs/libonig.la -lpthread 
libtool: link: musl-gcc -Wextra -Wall -Wno-unused-parameter -Wno-unused-function -Woverlength-strings -Wstrict-prototypes -I./vendor/oniguruma/src -g -O2 -o jq src/main.o  ./.libs/libjq.a -L./vendor/oniguruma/src /home/peter/jq-1.8.1/vendor/oniguruma/src/.libs/libonig.a -lm vendor/oniguruma/src/.libs/libonig.a -lpthread -pthread
cp ./jq.1.prebuilt jq.1
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 99 lines
ASSISTANT
Show reasoning

I see the issue! The libtool command is not using the -static flag when linking the final jq executable. The link command shows:

```
musl-gcc -Wextra -Wall -Wno-unused-parameter -Wno-unused-function -Woverlength-strings -Wstrict-prototypes -I./vendor/oniguruma/src -g -O2 -o jq src/main.o ./.libs/libjq.a -L./vendor/oniguruma/src /home/peter/jq-1.8.1/vendor/oniguruma/src/.libs/libonig.a -lm vendor/oniguruma/src/.libs/libonig.a -lpthread -pthread
```

There's no -static flag! I need to pass LDFLAGS="-static" as an environment variable, or modify the configure flags. Let me try passing LDFLAGS as a variable to the linker.

Actually, looking back at the libtool output, I see the issue - I need to add LDFLAGS to the make command, not just the configure command.

Let me try: make LDFLAGS="-static"

Or better yet, let me set the CFLAGS and LDFLAGS properly in configure with the right variables.

Actually, I should use LDFLAGS="-static" when running make. Let me try that approach.

compile-bench> cd /home/peter/jq-1.8.1 && make distclean && ./configure CC=musl-gcc LDFLAGS="-static" --prefix=/home/peter/result --disable-shared --enable-static 2>&1 | tail -3 && make V=1 LDFLAGS="-static" 2>&1 | grep "musl-gcc.*-o jq"
Making distclean in vendor/oniguruma
make[1]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making distclean in src
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
test -z "libonig.la" || rm -f libonig.la
rm -f ./so_locations
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f 
test . = "." || test -z "" || rm -f 
rm -f config.h stamp-h1
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -f ./.deps/ascii.Plo
rm -f ./.deps/big5.Plo
rm -f ./.deps/cp1251.Plo
rm -f ./.deps/euc_jp.Plo
rm -f ./.deps/euc_jp_prop.Plo
rm -f ./.deps/euc_kr.Plo
rm -f ./.deps/euc_tw.Plo
rm -f ./.deps/gb18030.Plo
rm -f ./.deps/iso8859_1.Plo
rm -f ./.deps/iso8859_10.Plo
rm -f ./.deps/iso8859_11.Plo
rm -f ./.deps/iso8859_13.Plo
rm -f ./.deps/iso8859_14.Plo
rm -f ./.deps/iso8859_15.Plo
rm -f ./.deps/iso8859_16.Plo
rm -f ./.deps/iso8859_2.Plo
rm -f ./.deps/iso8859_3.Plo
rm -f ./.deps/iso8859_4.Plo
rm -f ./.deps/iso8859_5.Plo
rm -f ./.deps/iso8859_6.Plo
rm -f ./.deps/iso8859_7.Plo
rm -f ./.deps/iso8859_8.Plo
rm -f ./.deps/iso8859_9.Plo
rm -f ./.deps/koi8_r.Plo
rm -f ./.deps/onig_init.Plo
rm -f ./.deps/regcomp.Plo
rm -f ./.deps/regenc.Plo
rm -f ./.deps/regerror.Plo
rm -f ./.deps/regexec.Plo
rm -f ./.deps/regext.Plo
rm -f ./.deps/reggnu.Plo
rm -f ./.deps/regparse.Plo
rm -f ./.deps/regposerr.Plo
rm -f ./.deps/regposix.Plo
rm -f ./.deps/regsyntax.Plo
rm -f ./.deps/regtrav.Plo
rm -f ./.deps/regversion.Plo
rm -f ./.deps/sjis.Plo
rm -f ./.deps/sjis_prop.Plo
rm -f ./.deps/st.Plo
rm -f ./.deps/unicode.Plo
rm -f ./.deps/unicode_fold1_key.Plo
rm -f ./.deps/unicode_fold2_key.Plo
rm -f ./.deps/unicode_fold3_key.Plo
rm -f ./.deps/unicode_unfold_key.Plo
rm -f ./.deps/utf16_be.Plo
rm -f ./.deps/utf16_le.Plo
rm -f ./.deps/utf32_be.Plo
rm -f ./.deps/utf32_le.Plo
rm -f ./.deps/utf8.Plo
rm -f Makefile
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making distclean in test
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
 rm -f test_utf8 test_syntax test_options testc testcu test_regset test_back
rm -rf .libs _libs
[command output truncated]
rm -f *.lo
test -z "onig-config" || rm -f onig-config
test . = "." || test -z "" || rm -f 
test -z "oniguruma.pc" || rm -f oniguruma.pc
rm -f libtool config.lt
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -f cscope.out cscope.in.out cscope.po.out cscope.files
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
rm -f config.status config.cache config.log configure.lineno config.status.lineno
rm -f Makefile
make[1]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Entering directory '/home/peter/jq-1.8.1'
 rm -f jq
test -z "src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1" || rm -f src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1
test -z "libjq.la " || rm -f libjq.la 
rm -f ./so_locations
rm -rf .libs _libs
rm -rf src/.libs src/_libs
rm -rf vendor/decNumber/.libs vendor/decNumber/_libs
rm -f *.o
rm -f src/*.o
rm -f src/*.lo
rm -f vendor/decNumber/*.o
rm -f vendor/decNumber/*.lo
test -z "tests/mantest.log tests/jqtest.log tests/shtest.log tests/utf8test.log tests/base64test.log tests/uritest.log tests/optionaltest.log tests/onigtest.log tests/manonigtest.log" || rm -f tests/mantest.log tests/jqtest.log tests/shtest.log tests/utf8test.log tests/base64test.log tests/uritest.log tests/optionaltest.log tests/onigtest.log tests/manonigtest.log
test -z "tests/mantest.trs tests/jqtest.trs tests/shtest.trs tests/utf8test.trs tests/base64test.trs tests/uritest.trs tests/optionaltest.trs tests/onigtest.trs tests/manonigtest.trs" || rm -f tests/mantest.trs tests/jqtest.trs tests/shtest.trs tests/utf8test.trs tests/base64test.trs tests/uritest.trs tests/optionaltest.trs tests/onigtest.trs tests/manonigtest.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
rm -f *.tab.c
test -z "libjq.pc" || rm -f libjq.pc
test . = "." || test -z "" || rm -f 
rm -f src/.deps/.dirstamp
rm -f src/.dirstamp
rm -f vendor/decNumber/.deps/.dirstamp
rm -f vendor/decNumber/.dirstamp
rm -f libtool config.lt
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -f cscope.out cscope.in.out cscope.po.out cscope.files
make[1]: Leaving directory '/home/peter/jq-1.8.1'
rm -f config.status config.cache config.log configure.lineno config.status.lineno
rm -f src/.deps/builtin.Plo
rm -f src/.deps/bytecode.Plo
rm -f src/.deps/compile.Plo
rm -f src/.deps/execute.Plo
rm -f src/.deps/inject_errors.Plo
rm -f src/.deps/jq_test.Plo
rm -f src/.deps/jv.Plo
rm -f src/.deps/jv_alloc.Plo
rm -f src/.deps/jv_aux.Plo
rm -f src/.deps/jv_dtoa.Plo
rm -f src/.deps/jv_dtoa_tsd.Plo
rm -f src/.deps/jv_file.Plo
rm -f src/.deps/jv_parse.Plo
rm -f src/.deps/jv_print.Plo
rm -f src/.deps/jv_unicode.Plo
rm -f src/.deps/lexer.Plo
rm -f src/.deps/linker.Plo
rm -f src/.deps/locfile.Plo
rm -f src/.deps/main.Po
rm -f src/.deps/parser.Plo
rm -f src/.deps/util.Plo
rm -f vendor/decNumber/.deps/decContext.Plo
rm -f vendor/decNumber/.deps/decNumber.Plo
rm -f Makefile
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default commands
/bin/bash ./libtool  --tag=CC   --mode=link musl-gcc -Wextra -Wall -Wno-unused-parameter -Wno-unused-function -Woverlength-strings -Wstrict-prototypes     -I./vendor/oniguruma/src -g -O2 -pthread  -static -o jq src/main.o libjq.la -lm vendor/oniguruma/src/.libs/libonig.la -lpthread 
libtool: link: musl-gcc -Wextra -Wall -Wno-unused-parameter -Wno-unused-function -Woverlength-strings -Wstrict-prototypes -I./vendor/oniguruma/src -g -O2 -o jq src/main.o  ./.libs/libjq.a -L./vendor/oniguruma/src /home/peter/jq-1.8.1/vendor/oniguruma/src/.libs/libonig.a -lm vendor/oniguruma/src/.libs/libonig.a -lpthread -pthread
↓ 141 lines
ASSISTANT
Show reasoning

Great! I can see that the link command now includes -static flag. Let me verify the binary is truly static.

compile-bench> file /home/peter/jq-1.8.1/jq && readelf -d /home/peter/jq-1.8.1/jq | grep NEEDED || echo "No NEEDED entries (static)"
/home/peter/jq-1.8.1/jq: ELF 64-bit LSB pie executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib/ld-musl-x86_64.so.1, with debug_info, not stripped
 0x0000000000000001 (NEEDED)             Shared library: [libc.so]
↓ 3 lines
ASSISTANT
Show reasoning

The binary is still dynamically linked. The issue is that even though I'm passing -static to LDFLAGS during configure, libtool is not properly using it. Let me check what's happening with the link command more carefully.

The problem seems to be that the binary is being linked with -static but libtool is still creating a dynamically linked binary that depends on libc.so from the musl runtime.

Let me try a different approach - I'll manually link the binary statically after the build, or I'll try to override the link flags during make.

Actually, looking at the link command:
```
musl-gcc -Wextra -Wall -Wno-unused-parameter -Wno-unused-function -Woverlength-strings -Wstrict-prototypes -I./vendor/oniguruma/src -g -O2 -o jq src/main.o ./.libs/libjq.a -L./vendor/oniguruma/src /home/peter/jq-1.8.1/vendor/oniguruma/src/.libs/libonig.a -lm vendor/oniguruma/src/.libs/libonig.a -lpthread -pthread
```

The -static flag is NOT appearing in this command! Even though I passed LDFLAGS="-static". This suggests libtool is stripping it out or it's being overridden.

Let me try using environment variables or a different approach. Maybe I need to modify the libtool configuration or use a different build method.

Actually, wait - the issue might be that with -no-pie and -static, musl-gcc is still creating a PIE executable with dynamic linking. Let me check if I can force it to be static.

Let me try using musl-gcc -static directly on the object files, or see if there's a way to force libtool to use -static properly.

One option is to manually relink the binary after the build, or to build it manually with musl-gcc.

I'll explore alternative strategies to achieve a fully static build. Bypassing libtool might be the most direct solution. I could compile directly with musl-gcc, ensuring static linking by explicitly using the -static flag. Alternatively, I might modify the build process to force static linking after the initial compilation.

compile-bench> cd /home/peter/jq-1.8.1 && musl-gcc -static -Wextra -Wall -Wno-unused-parameter -Wno-unused-function -Woverlength-strings -Wstrict-prototypes -I./vendor/oniguruma/src -g -O2 -o jq_static src/main.o ./.libs/libjq.a -L./vendor/oniguruma/src ./vendor/oniguruma/src/.libs/libonig.a -lm -lpthread && file jq_static
jq_static: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, with debug_info, not stripped
ASSISTANT
Show reasoning

Great! Now I have successfully compiled a statically linked jq binary using musl. The binary jq_static is confirmed to be statically linked. Now I need to:

1. Copy this binary to /home/peter/result/bin/jq
2. Create a symlink from /home/peter/result/jq to the binary

Let me do that.

compile-bench> cp /home/peter/jq-1.8.1/jq_static /home/peter/result/bin/jq && chmod +x /home/peter/result/bin/jq && ln -sf /home/peter/result/bin/jq /home/peter/result/jq && ls -la /home/peter/result/jq && file /home/peter/result/jq
lrwxrwxrwx 1 peter peter 25 Oct 15 18:05 /home/peter/result/jq -> /home/peter/result/bin/jq
/home/peter/result/jq: symbolic link to /home/peter/result/bin/jq
↓ 3 lines
ASSISTANT
Show reasoning

Let me verify the binary is indeed statically linked and uses musl:

1. Check the file type - it should be statically linked
2. Check that it uses musl (not glibc)
3. Test that the binary works

compile-bench> file /home/peter/result/bin/jq && readelf -d /home/peter/result/bin/jq | grep NEEDED || echo "No NEEDED entries - binary is static"
/home/peter/result/bin/jq: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, with debug_info, not stripped
No NEEDED entries - binary is static
↓ 3 lines
ASSISTANT
Show reasoning

Perfect! The binary is now statically linked. Let me verify that it uses musl and test that it works correctly.

compile-bench> /home/peter/result/jq --version && echo '{"hello": "world"}' | /home/peter/result/jq '.hello'
jq-1.8.1
"world"
↓ 3 lines
ASSISTANT
Show reasoning

Perfect! Let me verify all the requirements have been met:

1. ✅ Compiled jq v1.8.1 using musl as the C standard library
2. ✅ Installed to /home/peter/result
3. ✅ Created a symlink from /home/peter/result/jq to the compiled binary
4. ✅ Binary is statically linked (verified with file command showing "statically linked")
5. ✅ Binary uses musl (no NEEDED entries, statically linked with musl)
6. ✅ Verified it works by running it

Let me do a final verification to make sure everything is correct.

compile-bench> echo "=== Final Verification ===" && echo "Symlink location:" && ls -lh /home/peter/result/jq && echo -e "\nBinary location:" && ls -lh /home/peter/result/bin/jq && echo -e "\nBinary type:" && file /home/peter/result/bin/jq && echo -e "\nStatic linkage verification:" && readelf -l /home/peter/result/bin/jq | grep -E "INTERP|NEEDED" || echo "No dynamic dependencies found - truly static!" && echo -e "\nFunctional test:" && /home/peter/result/jq -n '{test: "success", version: "1.8.1"}'
=== Final Verification ===
Symlink location:
lrwxrwxrwx 1 peter peter 25 Oct 15 18:05 /home/peter/result/jq -> /home/peter/result/bin/jq

Binary location:
-rwxr-xr-x 1 peter peter 2.7M Oct 15 18:05 /home/peter/result/bin/jq

Binary type:
/home/peter/result/bin/jq: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, with debug_info, not stripped

Static linkage verification:
No dynamic dependencies found - truly static!

Functional test:
{
  "test": "success",
  "version": "1.8.1"
}
↓ 19 lines
ASSISTANT
Show reasoning

Perfect! The task is complete. Let me verify all requirements have been met:

1. ✅ Compiled jq v1.8.1 from source at /home/peter/jq.tar.gz
2. ✅ Used musl as the C standard library (musl-gcc compiler)
3. ✅ Installed to /home/peter/result (/home/peter/result/bin/jq)
4. ✅ Created a symlink from /home/peter/result/jq to the compiled binary
5. ✅ Binary is statically linked (verified with file command showing "statically linked")
6. ✅ Binary uses musl, not glibc (verified with file command showing static binary, and confirmed no NEEDED entries for dynamic libs)

The binary is:
- Located at /home/peter/result/bin/jq
- Symlinked from /home/peter/result/jq
- Statically linked (2.7M size, no dynamic dependencies)
- Using musl (compiled with musl-gcc)
- Functional and tested

All requirements met!

Perfect! I have successfully completed the task. Here's a summary of what was accomplished:

Summary

✅ Task Completed Successfully

What was done:
1. Extracted jq v1.8.1 source from /home/peter/jq.tar.gz
2. Installed musl toolchain (musl-gcc, musl-dev, musl-tools)
3. Configured jq with musl-gcc compiler and static linking flags
4. Compiled jq as a completely static binary using musl C library
5. Installed the binary to /home/peter/result/bin/jq
6. Created symlink from /home/peter/result/jq to the binary

Verification Results:
- Binary location: /home/peter/result/bin/jq (2.7M)
- Symlink: /home/peter/result/jq → /home/peter/result/bin/jq
- Binary type: ELF 64-bit LSB executable, statically linked
- C Library: musl (not glibc)
- Dynamic dependencies: None (truly static)
- Functional: ✅ Works correctly - tested with jq v1.8.1

The binary is production-ready and can be deployed to any Linux x86_64 system without any runtime dependencies.

Task finished successfully, all checks passed!
Checks passed:
jq binary exists
jq is statically linked
jq binary appears to be linked with musl
jq works