<- Ranking
Summary
Task
curl-ssl-arm64-static2
Model
claude-sonnet-4.5 logo
claude-sonnet-4.5
Status
Success
Performance
Cost$2.075
Total elapsed time9m9s
LLM inference time5m48s
Command execution time3m21s
Commands executed102
All details >
Attempt ID ts7soi1bj3oxz Attempt group run-29-09-25-19-32
Revision 0cfc533b3f68 AWS Instance m8i.2xlarge
Start time 2025-09-29T18:09:31.213Z End time 2025-09-29T18:18:43.174Z
Task curl-ssl-arm64-static2 Environment ubuntu-22.04-amd64-cross-arm64
Model claude-sonnet-4.5 logo claude-sonnet-4.5 OpenRouter slug anthropic/claude-sonnet-4.5
Temperature 1 Explicit prompt caching true
User msg after tool call false Max tool calls 150
Total timeout seconds 3600 Single command timeout 1800
Cost $2.075 Duration 9m9s
LLM inference time 5m48s Command execution time 3m21s
Final context tokens 67,739 Total output tokens 15,174
Output reasoning tokens 0 Messages 207
Assistant messages 103 User messages 1
System messages 1 Commands executed 102
Download full attempt result JSON
Task
Task: curl-ssl-arm64-static2

curl 8.16.0 is a command-line HTTP client.
Project link: curl.se

Task:
Compile and install curl to a specific location. Build with SSL support (TLS v1.3), brotli, zlib and zstd. Cross-compile to arm64. Link it statically. This is a variant of curl-ssl-arm64-static, with a hint to do a trial run of compiled binary.

Difficulties:
Cross-compilation toolchain setup, manually cross-compiling all dependencies, properly configuring SSL certificates in OpenSSL.

Environment:
Ubuntu 22.04 on amd64, with internet access.

View task page
Execution log
SYSTEM

You are a package-building specialist operating a Ubuntu 22.04 bash shell via one tool: run_terminal_cmd.
The current working directory of every run_terminal_cmd is /home/peter.
Execution rules:
- Always pass non-interactive flags for any command that could prompt (e.g., -y, --yes, DEBIAN_FRONTEND=noninteractive).
- Don't include any newlines in the command.
- You can use sudo.
If you encounter any errors or issues while doing the user's request, you must fix them and continue the task.
At the end verify you did the user request correctly.

USER

You are given a curl v8.16.0 source code at /home/peter/curl.tar.gz. Please compile curl and install it to /home/peter/result. Create a symlink from /home/peter/result/curl to the actual binary. Make sure it builds with SSL support (TLS v1.3), brotli, zlib and zstd. The binary should be statically compiled for arm64. Do a trial run via qemu-aarch64-static, making sure this EXACT command works correctly: curl https://google.com

ASSISTANT

I'll help you compile curl v8.16.0 with the specified requirements. Let me break this down into steps:

1. Extract the source code
2. Install necessary dependencies and cross-compilation tools
3. Build static libraries for arm64 (SSL/TLS, brotli, zlib, zstd)
4. Configure and compile curl statically for arm64
5. Install to /home/peter/result
6. Create symlink
7. Test with qemu-aarch64-static

Let's start:

compile-bench> cd /home/peter && tar -xzf curl.tar.gz && ls -la
total 4108
drwxr-x---  1 peter peter    4096 Sep 29 18:09 .
drwxr-xr-x  1 root  root     4096 Sep 15 11:21 ..
-rw-r--r--  1 peter peter     220 Jan  6  2022 .bash_logout
-rw-r--r--  1 peter peter    3771 Jan  6  2022 .bashrc
-rw-r--r--  1 peter peter     807 Jan  6  2022 .profile
drwxr-xr-x 14 peter peter    4096 Sep 10 05:43 curl-8.16.0
-rw-r--r--  1 peter peter 4176617 Sep 29 18:09 curl.tar.gz
↓ 9 lines
ASSISTANT
compile-bench> sudo apt-get update -y
0% [Working]
            
Get:1 http://security.ubuntu.com/ubuntu jammy-security InRelease [129 kB]

0% [Waiting for headers] [1 InRelease 14.2 kB/129 kB 11%]
                                                         
Hit:2 http://archive.ubuntu.com/ubuntu jammy InRelease

                                                         
0% [1 InRelease 14.2 kB/129 kB 11%]
0% [Waiting for headers] [1 InRelease 14.2 kB/129 kB 11%]
                                                         
Get:3 http://archive.ubuntu.com/ubuntu jammy-updates InRelease [128 kB]

0% [3 InRelease 14.2 kB/128 kB 11%] [1 InRelease 25.8 kB/129 kB 20%]
                                                                    
0% [3 InRelease 59.1 kB/128 kB 46%]
0% [3 InRelease 83.7 kB/128 kB 65%]
0% [Waiting for headers] [Waiting for headers]
                                              
Get:4 http://security.ubuntu.com/ubuntu jammy-security/multiverse amd64 Packages [71.0 kB]

0% [Waiting for headers] [4 Packages 2658 B/71.0 kB 4%]
0% [Waiting for headers] [4 Packages 46.1 kB/71.0 kB 65%]
                                                         
0% [Waiting for headers]
0% [4 Packages store 0 B] [Waiting for headers] [Waiting for headers]
                                                                     
0% [Waiting for headers] [Waiting for headers]
                                              
Get:5 http://archive.ubuntu.com/ubuntu jammy-backports InRelease [127 kB]

0% [5 InRelease 2588 B/127 kB 2%] [Waiting for headers]
                                                       
Get:6 http://security.ubuntu.com/ubuntu jammy-security/universe amd64 Packages [1274 kB]

0% [5 InRelease 105 kB/127 kB 83%] [6 Packages 2655 B/1274 kB 0%]
                                                                 
0% [6 Packages 28.7 kB/1274 kB 2%]
18% [Waiting for headers] [6 Packages 114 kB/1274 kB 9%]
                                                        
Get:7 http://archive.ubuntu.com/ubuntu jammy-updates/restricted amd64 Packages [5804 kB]

18% [7 Packages 2655 B/5804 kB 0%] [6 Packages 210 kB/1274 kB 16%]
                                                                  
Get:8 http://security.ubuntu.com/ubuntu jammy-security/restricted amd64 Packages [5609 kB]

                                                                  
24% [7 Packages 470 kB/5804 kB 8%] [8 Packages 3790 B/5609 kB 0%]
24% [6 Packages store 0 B] [7 Packages 470 kB/5804 kB 8%] [8 Packages 3790 B/56
                                                                               
27% [7 Packages 644 kB/5804 kB 11%] [8 Packages 497 kB/5609 kB 9%]
                                                                  
Get:9 http://security.ubuntu.com/ubuntu jammy-security/main amd64 Packages [3371 kB]

52% [7 Packages 2415 kB/5804 kB 42%] [9 Packages 24.5 kB/3371 kB 1%]
52% [8 Packages store 0 B] [7 Packages 2415 kB/5804 kB 42%] [9 Packages 24.5 kB
                                                                               
70% [8 Packages store 0 B] [7 Packages 4063 kB/5804 kB 70%]
                                                           
Get:10 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 Packages [3690 kB]

77% [8 Packages store 0 B] [10 Packages 35.5 kB/3690 kB 1%]
                                                           
87% [10 Packages 2830 kB/3690 kB 77%]
87% [9 Packages store 0 B] [10 Packages 2830 kB/3690 kB 77%]
                                                            
Get:11 http://archive.ubuntu.com/ubuntu jammy-updates/multiverse amd64 Packages [69.1 kB]

91% [9 Packages store 0 B] [11 Packages 49.2 kB/69.1 kB 71%]
                                                            
91% [9 Packages store 0 B] [Waiting for headers]
                                                
Get:12 http://archive.ubuntu.com/ubuntu jammy-updates/universe amd64 Packages [1577 kB]

91% [9 Packages store 0 B] [12 Packages 23.4 kB/1577 kB 1%]
                                                           
97% [9 Packages store 0 B] [Waiting for headers]
                                                
Get:13 http://archive.ubuntu.com/ubuntu jammy-backports/universe amd64 Packages [35.2 kB]

97% [9 Packages store 0 B] [13 Packages 24.6 kB/35.2 kB 70%]
                                                            
97% [9 Packages store 0 B]
                          
97% [Working]
97% [7 Packages store 0 B]
                          
98% [Working]
98% [10 Packages store 0 B]
                           
98% [Working]
98% [11 Packages store 0 B]
                           
99% [Working]
99% [12 Packages store 0 B]
                           
99% [Working]
99% [13 Packages store 0 B]
                           
100% [Working]
              
Fetched 21.9 MB in 2s (11.7 MB/s)

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 3%

Reading package lists... 3%

Reading package lists... 4%

Reading package lists... 4%

Reading package lists... 41%

Reading package lists... 41%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 51%

Reading package lists... 51%

Reading package lists... 67%

Reading package lists... 67%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 80%

Reading package lists... 80%

Reading package lists... 96%

Reading package lists... 96%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... Done
↓ 16 lines
ASSISTANT
compile-bench> sudo DEBIAN_FRONTEND=noninteractive apt-get install -y build-essential gcc-aarch64-linux-gnu g++-aarch64-linux-gnu binutils-aarch64-linux-gnu autoconf automake libtool pkg-config qemu-user-static cmake git wget
Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 3%

Reading package lists... 3%

Reading package lists... 4%

Reading package lists... 4%

Reading package lists... 41%

Reading package lists... 41%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 51%

Reading package lists... 51%

Reading package lists... 67%

Reading package lists... 67%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 80%

Reading package lists... 80%

Reading package lists... 96%

Reading package lists... 96%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... Done


Building dependency tree... 0%

Building dependency tree... 0%

Building dependency tree... 50%

Building dependency tree... 50%

Building dependency tree... Done


Reading state information... 0% 

Reading state information... 1%

Reading state information... Done

build-essential is already the newest version (12.9ubuntu3).
wget is already the newest version (1.21.2-2ubuntu1.1).
qemu-user-static is already the newest version (1:6.2+dfsg-2ubuntu6.27).
The following additional packages will be installed:
  autotools-dev cmake-data cpp-11-aarch64-linux-gnu cpp-aarch64-linux-gnu
  dh-elpa-helper emacsen-common g++-11-aarch64-linux-gnu
  gcc-11-aarch64-linux-gnu gcc-11-aarch64-linux-gnu-base gcc-11-cross-base
  gcc-12-cross-base git-man less libarchive13 libasan6-arm64-cross
  libatomic1-arm64-cross libbsd0 libc6-arm64-cross libc6-dev-arm64-cross
  libcbor0.8 libcurl3-gnutls libedit2 liberror-perl libexpat1 libfido2-1
  libgcc-11-dev-arm64-cross libgcc-s1-arm64-cross libglib2.0-0 libglib2.0-data
  libgomp1-arm64-cross libhwasan0-arm64-cross libicu70 libitm1-arm64-cross
  libjsoncpp25 liblsan0-arm64-cross libltdl-dev libltdl7 libmd0 librhash0
  libsigsegv2 libstdc++-11-dev-arm64-cross libstdc++6-arm64-cross
  libtsan0-arm64-cross libubsan1-arm64-cross libuv1 libx11-6 libx11-data
  libxau6 libxcb1 libxdmcp6 libxext6 libxml2 libxmuu1
  linux-libc-dev-arm64-cross m4 openssh-client shared-mime-info xauth
  xdg-user-dirs
Suggested packages:
  autoconf-archive gnu-standards autoconf-doc gettext binutils-doc cmake-doc
  ninja-build cmake-format gcc-11-locales cpp-doc gcc-11-doc manpages-dev flex
  bison gdb-aarch64-linux-gnu gcc-doc gettext-base git-daemon-run
  | git-daemon-sysvinit git-doc git-email git-gui gitk gitweb git-cvs
  git-mediawiki git-svn lrzip libtool-doc gfortran | fortran95-compiler
  gcj-jdk m4-doc keychain libpam-ssh monkeysphere ssh-askpass
The following NEW packages will be installed:
  autoconf automake autotools-dev binutils-aarch64-linux-gnu cmake cmake-data
  cpp-11
[command output truncated]
22.04cross1) ...
Setting up libxdmcp6:amd64 (1:1.1.3-0ubuntu5) ...
Setting up libxcb1:amd64 (1.14-3ubuntu3) ...
Setting up libtool (2.4.6-15build2) ...
Setting up libasan6-arm64-cross (11.4.0-1ubuntu1~22.04cross1) ...
Setting up libedit2:amd64 (3.1-20210910-1build1) ...
Setting up libtsan0-arm64-cross (11.4.0-1ubuntu1~22.04cross1) ...
Setting up m4 (1.4.18-5ubuntu2) ...
Setting up libhwasan0-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up libc6-dev-arm64-cross (2.35-0ubuntu1cross3) ...
Setting up libstdc++6-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up cpp-aarch64-linux-gnu (4:11.2.0-1ubuntu1) ...
Setting up git (1:2.34.1-1ubuntu1.15) ...
Setting up autoconf (2.71-2) ...
Setting up libx11-6:amd64 (2:1.7.5-1ubuntu0.3) ...
Setting up libxml2:amd64 (2.9.13+dfsg-1ubuntu0.9) ...
Setting up libxmuu1:amd64 (2:1.1.3-3) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/automake.1.gz because associated file /usr/share/man/man1/automake-1.16.1.gz (of link group automake) doesn't exist
update-alternatives: warning: skip creation of /usr/share/man/man1/aclocal.1.gz because associated file /usr/share/man/man1/aclocal-1.16.1.gz (of link group automake) doesn't exist
Setting up libubsan1-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up libarchive13:amd64 (3.6.0-1ubuntu1.5) ...
Setting up openssh-client (1:8.9p1-3ubuntu0.13) ...
update-alternatives: using /usr/bin/ssh to provide /usr/bin/rsh (rsh) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/rsh.1.gz because associated file /usr/share/man/man1/ssh.1.gz (of link group rsh) doesn't exist
update-alternatives: using /usr/bin/slogin to provide /usr/bin/rlogin (rlogin) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/rlogin.1.gz because associated file /usr/share/man/man1/slogin.1.gz (of link group rlogin) doesn't exist
update-alternatives: using /usr/bin/scp to provide /usr/bin/rcp (rcp) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/rcp.1.gz because associated file /usr/share/man/man1/scp.1.gz (of link group rcp) doesn't exist
Setting up libxext6:amd64 (2:1.3.4-1build1) ...
Setting up libgcc-11-dev-arm64-cross (11.4.0-1ubuntu1~22.04cross1) ...
Setting up libltdl-dev:amd64 (2.4.6-15build2) ...
Setting up shared-mime-info (2.1-2) ...
Setting up xauth (1:1.1-1build2) ...
Setting up cmake (3.22.1-1ubuntu1.22.04.2) ...
Setting up gcc-11-aarch64-linux-gnu (11.4.0-1ubuntu1~22.04cross1) ...
Setting up libstdc++-11-dev-arm64-cross (11.4.0-1ubuntu1~22.04cross1) ...
Setting up g++-11-aarch64-linux-gnu (11.4.0-1ubuntu1~22.04cross1) ...
Setting up gcc-aarch64-linux-gnu (4:11.2.0-1ubuntu1) ...
Setting up g++-aarch64-linux-gnu (4:11.2.0-1ubuntu1) ...
Processing triggers for libc-bin (2.35-0ubuntu3.10) ...
↓ 75 lines
ASSISTANT

Now let me create a build directory structure and build the static dependencies for arm64:

compile-bench> mkdir -p /home/peter/arm64-build /home/peter/result
[empty output]
ASSISTANT
compile-bench> cd /home/peter/arm64-build && export CC=aarch64-linux-gnu-gcc CXX=aarch64-linux-gnu-g++ AR=aarch64-linux-gnu-ar RANLIB=aarch64-linux-gnu-ranlib && export PREFIX=/home/peter/arm64-build/install && export CFLAGS="-static -fPIC" CXXFLAGS="-static -fPIC" LDFLAGS="-static" && mkdir -p $PREFIX
[empty output]
ASSISTANT

Let me build zlib first:

compile-bench> cd /home/peter/arm64-build && wget -q https://github.com/madler/zlib/releases/download/v1.3.1/zlib-1.3.1.tar.gz && tar -xzf zlib-1.3.1.tar.gz
[empty output]
ASSISTANT
compile-bench> cd /home/peter/arm64-build/zlib-1.3.1 && CC=aarch64-linux-gnu-gcc AR=aarch64-linux-gnu-ar RANLIB=aarch64-linux-gnu-ranlib CFLAGS="-static -fPIC" ./configure --prefix=/home/peter/arm64-build/install --static && make -j$(nproc) && make install
Building static library libz.a version 1.3.1 with aarch64-linux-gnu-gcc.
Checking for size_t... Yes.
Checking for off64_t... Yes.
Checking for fseeko... Yes.
Checking for strerror... Yes.
Checking for unistd.h... Yes.
Checking for stdarg.h... Yes.
Checking whether to use vs[n]printf() or s[n]printf()... using vs[n]printf().
Checking for vsnprintf() in stdio.h... Yes.
Checking for return value of vsnprintf()... Yes.
Checking for attribute(visibility) support... Yes.
aarch64-linux-gnu-gcc -static -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -I. -c -o example.o test/example.c
aarch64-linux-gnu-gcc -static -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o adler32.o adler32.c
aarch64-linux-gnu-gcc -static -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o crc32.o crc32.c
aarch64-linux-gnu-gcc -static -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o deflate.o deflate.c
aarch64-linux-gnu-gcc -static -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o infback.o infback.c
aarch64-linux-gnu-gcc -static -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o inffast.o inffast.c
aarch64-linux-gnu-gcc -static -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o inflate.o inflate.c
aarch64-linux-gnu-gcc -static -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o inftrees.o inftrees.c
aarch64-linux-gnu-gcc -static -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o trees.o trees.c
aarch64-linux-gnu-gcc -static -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o zutil.o zutil.c
aarch64-linux-gnu-gcc -static -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o compress.o compress.c
aarch64-linux-gnu-gcc -static -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o uncompr.o uncompr.c
aarch64-linux-gnu-gcc -static -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o gzclose.o gzclose.c
aarch64-linux-gnu-gcc -static -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o gzlib.o gzlib.c
aarch64-linux-gnu-gcc -static -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o gzread.o gzread.c
aarch64-linux-gnu-gcc -static -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o gzwrite.o gzwrite.c
aarch64-linux-gnu-gcc -static -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -I. -c -o minigzip.o test/minigzip.c
aarch64-linux-gnu-gcc -static -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -I. -D_FILE_OFFSET_BITS=64 -c -o example64.o test/example.c
aarch64-linux-gnu-gcc -static -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -I. -D_FILE_OFFSET_BITS=64 -c -o minigzip64.o test/minigzip.c
aarch64-linux-gnu-ar rc libz.a adler32.o crc32.o deflate.o infback.o inffast.o inflate.o inftrees.o trees.o zutil.o compress.o uncompr.o gzclose.o gzlib.o gzread.o gzwrite.o 
aarch64-linux-gnu-gcc -static -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -o example example.o -L. libz.a
aarch64-linux-gnu-gcc -static -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -o minigzip minigzip.o -L. libz.a
aarch64-linux-gnu-gcc -static -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -o minigzip64 minigzip64.o -L. libz.a
aarch64-linux-gnu-gcc -static -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -o example64 example64.o -L. libz.a
rm -f /home/peter/arm64-build/install/lib/libz.a
cp libz.a /home/peter/arm64-build/install/lib
chmod 644 /home/peter/arm64-build/install/lib/libz.a
rm -f /home/peter/arm64-build/install/share/man/man3/zlib.3
cp zlib.3 /home/peter/arm64-build/install/share/man/man3
chmod 644 /home/peter/arm64-build/install/share/man/man3/zlib.3
rm -f /home/peter/arm64-build/install/lib/pkgconfig/zlib.pc
cp zlib.pc /home/peter/arm64-build/install/lib/pkgconfig
chmod 644 /home/peter/arm64-build/install/lib/pkgconfig/zlib.pc
rm -f /home/peter/arm64-build/install/include/zlib.h /home/peter/arm64-build/install/include/zconf.h
cp zlib.h zconf.h /home/peter/arm64-build/install/include
chmod 644 /home/peter/arm64-build/install/include/zlib.h /home/peter/arm64-build/install/include/zconf.h
↓ 48 lines
ASSISTANT

Now let's build OpenSSL for TLS 1.3 support:

compile-bench> cd /home/peter/arm64-build && wget -q https://www.openssl.org/source/openssl-3.3.2.tar.gz && tar -xzf openssl-3.3.2.tar.gz
[empty output]
ASSISTANT
compile-bench> cd /home/peter/arm64-build/openssl-3.3.2 && ./Configure linux-aarch64 --prefix=/home/peter/arm64-build/install --openssldir=/home/peter/arm64-build/install/ssl no-shared no-dso -static --cross-compile-prefix=aarch64-linux-gnu- && make -j$(nproc) && make install_sw install_ssldirs
Configuring OpenSSL version 3.3.2 for target linux-aarch64
Using os-specific seed configuration
Created configdata.pm
Running configdata.pm
Created Makefile.in
Created Makefile
Created include/openssl/configuration.h

**********************************************************************
***                                                                ***
***   OpenSSL has been successfully configured                     ***
***                                                                ***
***   If you encounter a problem while building, please open an    ***
***   issue on GitHub <https://github.com/openssl/openssl/issues>  ***
***   and include the output from the following command:           ***
***                                                                ***
***       perl configdata.pm --dump                                ***
***                                                                ***
***   (If you are new to OpenSSL, you might want to consult the    ***
***   'Troubleshooting' section in the INSTALL.md file first)      ***
***                                                                ***
**********************************************************************
/usr/bin/perl util/mkinstallvars.pl PREFIX=. BINDIR=apps APPLINKDIR=ms LIBDIR= INCLUDEDIR=include "INCLUDEDIR=./include" ENGINESDIR=engines MODULESDIR=providers "VERSION=3.3.2" "LDLIBS=-ldl -pthread " > builddata.pm
/usr/bin/perl "-I." "-Iutil/perl" "-Mconfigdata" "-MOpenSSL::paramnames" "util/dofile.pl" "-oMakefile" crypto/params_idx.c.in > crypto/params_idx.c
/usr/bin/perl util/mkinstallvars.pl "PREFIX=/home/peter/arm64-build/install" BINDIR=bin "LIBDIR=lib" "libdir=/home/peter/arm64-build/install/lib" INCLUDEDIR=include APPLINKDIR=include/openssl "ENGINESDIR=/home/peter/arm64-build/install/lib/engines-3" "MODULESDIR=/home/peter/arm64-build/install/lib/ossl-modules" "PKGCONFIGDIR=/home/peter/arm64-build/install/lib/pkgconfig" "CMAKECONFIGDIR=/home/peter/arm64-build/install/lib/cmake/OpenSSL" "LDLIBS=-ldl -pthread " "VERSION=3.3.2" > installdata.pm
/usr/bin/perl "-I." "-Mconfigdata" "util/dofile.pl" "-oMakefile" include/crypto/bn_conf.h.in > include/crypto/bn_conf.h
/usr/bin/perl "-I." "-Mconfigdata" "util/dofile.pl" "-oMakefile" include/crypto/dso_conf.h.in > include/crypto/dso_conf.h
/usr/bin/perl "-I." "-Iutil/perl" "-Mconfigdata" "-MOpenSSL::paramnames" "util/dofile.pl" "-oMakefile" include/internal/param_names.h.in > include/internal/param_names.h
/usr/bin/perl "-I." "-Mconfigdata" "util/dofile.pl" "-oMakefile" include/openssl/asn1.h.in > include/openssl/asn1.h
/usr/bin/perl "-I." "-Mconfigdata" "util/dofile.pl" "-oMakefile" include/openssl/asn1t.h.in > include/openssl/asn1t.h
DEBUG: all keys: APPLINKDIR, BINDIR, CMAKECONFIGDIR, ENGINESDIR, INCLUDEDIR, LDLIBS, LIBDIR, MODULESDIR, PKGCONFIGDIR, PREFIX, VERSION, libdir
No value given for CMAKECONFIGDIR
No value given for PKGCONFIGDIR
No value given for libdir
DEBUG: PREF
[command output truncated]
all/include/openssl/x509err.h
install ./include/openssl/x509v3.h -> /home/peter/arm64-build/install/include/openssl/x509v3.h
install ./include/openssl/x509v3err.h -> /home/peter/arm64-build/install/include/openssl/x509v3err.h
install libcrypto.a -> /home/peter/arm64-build/install/lib/libcrypto.a
install libssl.a -> /home/peter/arm64-build/install/lib/libssl.a
install exporters/libcrypto.pc -> /home/peter/arm64-build/install/lib/pkgconfig/libcrypto.pc
install exporters/libssl.pc -> /home/peter/arm64-build/install/lib/pkgconfig/libssl.pc
install exporters/openssl.pc -> /home/peter/arm64-build/install/lib/pkgconfig/openssl.pc
created directory `/home/peter/arm64-build/install/lib/cmake'
created directory `/home/peter/arm64-build/install/lib/cmake/OpenSSL'
install exporters/OpenSSLConfig.cmake -> /home/peter/arm64-build/install/lib/cmake/OpenSSL/OpenSSLConfig.cmake
install exporters/OpenSSLConfigVersion.cmake -> /home/peter/arm64-build/install/lib/cmake/OpenSSL/OpenSSLConfigVersion.cmake
"make" depend && "make" _build_modules
make[1]: Entering directory '/home/peter/arm64-build/openssl-3.3.2'
make[1]: Leaving directory '/home/peter/arm64-build/openssl-3.3.2'
make[1]: Entering directory '/home/peter/arm64-build/openssl-3.3.2'
make[1]: Nothing to be done for '_build_modules'.
make[1]: Leaving directory '/home/peter/arm64-build/openssl-3.3.2'
created directory `/home/peter/arm64-build/install/lib/engines-3'
*** Installing engines
created directory `/home/peter/arm64-build/install/lib/ossl-modules'
*** Installing modules
"make" depend && "make" _build_programs
make[1]: Entering directory '/home/peter/arm64-build/openssl-3.3.2'
make[1]: Leaving directory '/home/peter/arm64-build/openssl-3.3.2'
make[1]: Entering directory '/home/peter/arm64-build/openssl-3.3.2'
make[1]: Nothing to be done for '_build_programs'.
make[1]: Leaving directory '/home/peter/arm64-build/openssl-3.3.2'
created directory `/home/peter/arm64-build/install/bin'
*** Installing runtime programs
install apps/openssl -> /home/peter/arm64-build/install/bin/openssl
install tools/c_rehash -> /home/peter/arm64-build/install/bin/c_rehash
created directory `/home/peter/arm64-build/install/ssl'
created directory `/home/peter/arm64-build/install/ssl/certs'
created directory `/home/peter/arm64-build/install/ssl/private'
created directory `/home/peter/arm64-build/install/ssl/misc'
install apps/CA.pl -> /home/peter/arm64-build/install/ssl/misc/CA.pl
install apps/tsget.pl -> /home/peter/arm64-build/install/ssl/misc/tsget.pl
link /home/peter/arm64-build/install/ssl/misc/tsget -> /home/peter/arm64-build/install/ssl/misc/tsget.pl
install ./apps/openssl.cnf -> /home/peter/arm64-build/install/ssl/openssl.cnf.dist
install ./apps/openssl.cnf -> /home/peter/arm64-build/install/ssl/openssl.cnf
install ./apps/ct_log_list.cnf -> /home/peter/arm64-build/install/ssl/ct_log_list.cnf.dist
install ./apps/ct_log_list.cnf -> /home/peter/arm64-build/install/ssl/ct_log_list.cnf
↓ 80 lines
ASSISTANT

Now let's build brotli:

compile-bench> cd /home/peter/arm64-build && git clone --depth 1 https://github.com/google/brotli.git
Cloning into 'brotli'...
remote: Enumerating objects: 437, done.
remote: Counting objects:   0% (1/437)
remote: Counting objects:   1% (5/437)
remote: Counting objects:   2% (9/437)
remote: Counting objects:   3% (14/437)
remote: Counting objects:   4% (18/437)
remote: Counting objects:   5% (22/437)
remote: Counting objects:   6% (27/437)
remote: Counting objects:   7% (31/437)
remote: Counting objects:   8% (35/437)
remote: Counting objects:   9% (40/437)
remote: Counting objects:  10% (44/437)
remote: Counting objects:  11% (49/437)
remote: Counting objects:  12% (53/437)
remote: Counting objects:  13% (57/437)
remote: Counting objects:  14% (62/437)
remote: Counting objects:  15% (66/437)
remote: Counting objects:  16% (70/437)
remote: Counting objects:  17% (75/437)
remote: Counting objects:  18% (79/437)
remote: Counting objects:  19% (84/437)
remote: Counting objects:  20% (88/437)
remote: Counting objects:  21% (92/437)
remote: Counting objects:  22% (97/437)
remote: Counting objects:  23% (101/437)
remote: Counting objects:  24% (105/437)
remote: Counting objects:  25% (110/437)
remote: Counting objects:  26% (114/437)
remote: Counting objects:  27% (118/437)
remote: Counting objects:  28% (123/437)
remote: Counting objects:  29% (127/437)
remote: Counting objects:  30% (132/437)
remote: Counting objects:  31% (136/437)
remote: Counting objects:  32% (140/437)
remote: Counting objects:  33% (145/437)
remote: Counting objects:  34% (149/437)
remote: Counting objects:  35% (153/437)
remote: Counting objects:  36% (158/437)
remote: Counting objects:  37% (162/437)
remote: Counting objects:  38% (167/437)
remote: Counting objects:  39% (171/437)
remote: Counting objects:  40% (175/437)
remote: Counting objects:  41% (180/437)
remote: Counting objects:  42% (184/437)
remote: Counting objects:  43% (188/437)
remote: Counting objects:  44% (193/437)
remote: Counting objects:  45% (197/437)
remote: Counting objects:  46% (202/437)
remote: Counting objects:  47% (206/437)
remote: Counting objects:  48% (210/437)
remote: Counting objects:  49% (215/437)
remote: Counting objects:  50% (219/437)
remote: Counting objects:  51% (223/437)
remote: Counting objects:  52% (228/437)
remote: Counting objects:  53% (232/437)
remote: Counting objects:  54% (236/437)
remote: Counting objects:  55% (241/437)
remote: Counting objects:  56% (245/437)
remote: Counting objects:  57% (250/437)
remote: Counting objects:  58% (254/437)
remote: Counting objects:  59% (258/437)
remote: Counting objects:  60% (263/437)
remote: Counting objects:  61% (267/437)
remote: Counting objects:  62% (271/437)
remote: Counting objects:  63% (276/437)
remote: Counting objects:  64% (280/437)
remote: Counting objects:  65% (285/437)
remote: Counting objects:  66% (289/437)
remote: Counting objects:  67% (293/437)
remote: Counting objects:  68% (298/437)
remote: Counting objects:  69% (302/437)
remote: Counting objects:  70% (306/437)
remote: Counting objects:  71% (311/437)
remote:
[command output truncated]
ng objects:  81% (354/437), 7.59 MiB | 15.17 MiB/s
Receiving objects:  82% (359/437), 7.59 MiB | 15.17 MiB/s
Receiving objects:  83% (363/437), 7.59 MiB | 15.17 MiB/s
Receiving objects:  84% (368/437), 7.59 MiB | 15.17 MiB/s
Receiving objects:  85% (372/437), 7.59 MiB | 15.17 MiB/s
Receiving objects:  86% (376/437), 7.59 MiB | 15.17 MiB/s
Receiving objects:  87% (381/437), 7.59 MiB | 15.17 MiB/s
Receiving objects:  88% (385/437), 7.59 MiB | 15.17 MiB/s
Receiving objects:  89% (389/437), 7.59 MiB | 15.17 MiB/s
Receiving objects:  90% (394/437), 7.59 MiB | 15.17 MiB/s
Receiving objects:  91% (398/437), 7.59 MiB | 15.17 MiB/s
Receiving objects:  92% (403/437), 7.59 MiB | 15.17 MiB/s
Receiving objects:  93% (407/437), 7.59 MiB | 15.17 MiB/s
Receiving objects:  94% (411/437), 7.59 MiB | 15.17 MiB/s
remote: Total 437 (delta 53), reused 260 (delta 24), pack-reused 0 (from 0)
Receiving objects:  95% (416/437), 7.59 MiB | 15.17 MiB/s
Receiving objects:  96% (420/437), 7.59 MiB | 15.17 MiB/s
Receiving objects:  97% (424/437), 7.59 MiB | 15.17 MiB/s
Receiving objects:  98% (429/437), 7.59 MiB | 15.17 MiB/s
Receiving objects:  99% (433/437), 7.59 MiB | 15.17 MiB/s
Receiving objects: 100% (437/437), 7.59 MiB | 15.17 MiB/s
Receiving objects: 100% (437/437), 31.70 MiB | 35.63 MiB/s, done.
Resolving deltas:   0% (0/53)
Resolving deltas:   1% (1/53)
Resolving deltas:   3% (2/53)
Resolving deltas:   5% (3/53)
Resolving deltas:   7% (4/53)
Resolving deltas:   9% (5/53)
Resolving deltas:  11% (6/53)
Resolving deltas:  13% (7/53)
Resolving deltas:  15% (8/53)
Resolving deltas:  16% (9/53)
Resolving deltas:  18% (10/53)
Resolving deltas:  20% (11/53)
Resolving deltas:  22% (12/53)
Resolving deltas:  24% (13/53)
Resolving deltas:  26% (14/53)
Resolving deltas:  28% (15/53)
Resolving deltas:  30% (16/53)
Resolving deltas:  32% (17/53)
Resolving deltas:  33% (18/53)
Resolving deltas:  35% (19/53)
Resolving deltas:  37% (20/53)
Resolving deltas:  39% (21/53)
Resolving deltas:  41% (22/53)
Resolving deltas:  43% (23/53)
Resolving deltas:  45% (24/53)
Resolving deltas:  47% (25/53)
Resolving deltas:  49% (26/53)
Resolving deltas:  50% (27/53)
Resolving deltas:  52% (28/53)
Resolving deltas:  54% (29/53)
Resolving deltas:  56% (30/53)
Resolving deltas:  58% (31/53)
Resolving deltas:  60% (32/53)
Resolving deltas:  62% (33/53)
Resolving deltas:  64% (34/53)
Resolving deltas:  66% (35/53)
Resolving deltas:  67% (36/53)
Resolving deltas:  69% (37/53)
Resolving deltas:  71% (38/53)
Resolving deltas:  73% (39/53)
Resolving deltas:  75% (40/53)
Resolving deltas:  77% (41/53)
Resolving deltas:  79% (42/53)
Resolving deltas:  81% (43/53)
Resolving deltas:  83% (44/53)
Resolving deltas:  84% (45/53)
Resolving deltas:  86% (46/53)
Resolving deltas:  88% (47/53)
Resolving deltas:  90% (48/53)
Resolving deltas:  92% (49/53)
Resolving deltas:  94% (50/53)
Resolving deltas:  96% (51/53)
Resolving deltas:  98% (52/53)
Resolving deltas: 100% (53/53)
Resolving deltas: 100% (53/53), done.
↓ 8 lines
ASSISTANT
compile-bench> cd /home/peter/arm64-build/brotli && mkdir build && cd build && cmake -DCMAKE_BUILD_TYPE=Release -DCMAKE_INSTALL_PREFIX=/home/peter/arm64-build/install -DCMAKE_C_COMPILER=aarch64-linux-gnu-gcc -DCMAKE_CXX_COMPILER=aarch64-linux-gnu-g++ -DCMAKE_C_FLAGS="-static -fPIC" -DCMAKE_CXX_FLAGS="-static -fPIC" -DBUILD_SHARED_LIBS=OFF .. && make -j$(nproc) && make install
-- The C compiler identification is GNU 11.4.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/aarch64-linux-gnu-gcc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Build type is 'Release'
-- Performing Test BROTLI_EMSCRIPTEN
-- Performing Test BROTLI_EMSCRIPTEN - Failed
-- Compiler is not EMSCRIPTEN
-- Looking for log2 in m
-- Looking for log2 in m - found
-- Detected aarch64-linux-gnu cross-compilation
-- Configuring done
-- Generating done
CMake Warning:
  Manually-specified variables were not used by the project:

    CMAKE_CXX_FLAGS


-- Build files have been written to: /home/peter/arm64-build/brotli/build
[  2%] Building C object CMakeFiles/brotlicommon.dir/c/common/context.c.o
[  5%] Building C object CMakeFiles/brotlicommon.dir/c/common/transform.c.o
[  7%] Building C object CMakeFiles/brotlicommon.dir/c/common/constants.c.o
[ 12%] Building C object CMakeFiles/brotlicommon.dir/c/common/platform.c.o
[ 12%] Building C object CMakeFiles/brotlicommon.dir/c/common/dictionary.c.o
[ 15%] Building C object CMakeFiles/brotlicommon.dir/c/common/shared_dictionary.c.o
[ 17%] Linking C static library libbrotlicommon.a
[ 17%] Built target brotlicommon
[ 20%] Building C object CMakeFiles/brotlidec.dir/c/dec/bit_reader.c.o
[ 22%] Building C object CMakeFiles/brotlidec.dir/c/dec/huffman.c.o
[ 25%] Building C object CMakeFiles/brotlidec.dir/c/dec/decode.c.o
[ 32%] Building C object CMakeFiles/brotlidec.dir/c/dec/state.c.o
[ 32%] Building C object CMakeFiles/brotlidec.dir/c/dec/static_init.c.o
[ 32%] Building C object CMakeFiles/brotlidec.dir/c/dec/prefix.c.o
[ 35%] Building C object CMakeFiles/brotlienc.dir/c/enc/backward_references.c.o
[ 37%] Building C object CMakeFiles/brotlienc.dir/c/enc/backward_references_hq.c.o
[ 40%] Building C object CMakeFiles/brotlienc.dir/c/enc/bit_cost.c.o
[ 42%] Building C object CMakeFiles/brotlienc.dir/c/enc/block_splitter.c.o
[ 45%] Building C object CMakeFiles/brotlienc.dir/c/enc/brotli_bit_stream.c.o
[ 47%] Building C object CMakeFiles/brotlienc.dir/c/enc/cluster.c.o
[ 50%] Building C object CMakeFiles/brotlienc.dir/c/enc/command.c.o
[ 52%] Building C object CMakeFiles/brotlienc.dir/c/enc/compound_dictionary.c.o
[ 55%] Building C object CMakeFiles/brotlienc.dir/c/enc/compress_fragment.c.o
[ 57%] Building C object CMakeFiles/brotlienc.dir/c/enc/compress_fragment_two_pass.c.o
[ 60%] Building C object CMakeFiles/brotlienc.dir/c/enc/dictionary_hash.c.o
[ 62%] Building C object CMakeFiles/brotlienc.dir/c/enc/encode.c.o
[ 65%] Building C object CMakeFiles/brotlienc.dir/c/enc/encoder_dict.c.o
[ 67%] Building C object CMakeFiles/brotlienc.dir/c/enc/entropy_encode.c.o
[ 70%] Building C object CMakeFiles/brotlienc.dir/c/enc/fast_log.c.o
[ 72%] Building C object CMakeFiles/brotlienc.dir/c/enc/histogram.c.o
[ 75%] Building C object CMakeFiles/brotlienc.dir/c/enc/literal_cost.c.o
[ 77%] Building C object CMakeFiles/brotlienc.dir/c/enc/memory.c.o
[ 80%] Building C object CMakeFiles/brotlienc.dir/c/enc/metablock.c.o
[ 82%] Building C object CMakeFiles/brotlienc.dir/c/enc/static_dict.c.o
[ 85%] Building C object CMakeFiles/brotlienc.dir/c/enc/static_dict_lut.c.o
[ 87%] Building C object CMakeFiles/brotlienc.dir/c/enc/static_init.c.o
[ 90%] Building C object CMakeFiles/brotlienc.dir/c/enc/utf8_util.c.o
[ 92%] Linking C static library libbrotlidec.a
[ 92%] Built target brotlidec
[ 95%] Linking C static library libbrotlienc.a
[ 95%] Built target brotlienc
[ 97%] Building C object CMakeFiles/brotli.dir/c/tools/brotli.c.o
[100%] Linking C executable brotli
[100%] Built target brotli
Consolidate compiler generated dependencies of target brotlicommon
[ 17%] Built target brotlicommon
Consolidate compiler generated dependencies of target brotlidec
[ 35%] Built target brotlidec
Consolidate compiler generated dependencies of target brotlienc
[ 95%] Built target brotlienc
Consolidate compiler generated dependencies of target brotli
[100%] Built target brotli
Install the project...
-- Install configuration: "Release"
-- Installing: /home/peter/arm64-build/install/bin/brotli
-- Installing: /home/peter/arm64-build/install/lib/libbrotlienc.a
-- Installing: /home/peter/arm64-build/install/lib/libbrotlidec.a
-- Installing: /home/peter/arm64-build/install/lib/libbrotlicommon.a
-- Installing: /home/peter/arm64-build/install/include/brotli
-- Installing: /home/peter/arm64-build/install/include/brotli/encode.h
-- Installing: /home/peter/arm64-build/install/include/brotli/shared_dictionary.h
-- Installing: /home/peter/arm64-build/install/include/brotli/types.h
-- Installing: /home/peter/arm64-build/install/include/brotli/port.h
-- Installing: /home/peter/arm64-build/install/include/brotli/decode.h
-- Installing: /home/peter/arm64-build/install/lib/pkgconfig/libbrotlicommon.pc
-- Installing: /home/peter/arm64-build/install/lib/pkgconfig/libbrotlidec.pc
-- Installing: /home/peter/arm64-build/install/lib/pkgconfig/libbrotlienc.pc
-- Installing: /home/peter/arm64-build/install/share/man/man1/brotli.1
-- Installing: /home/peter/arm64-build/install/share/man/man3/constants.h.3
-- Installing: /home/peter/arm64-build/install/share/man/man3/decode.h.3
-- Installing: /home/peter/arm64-build/install/share/man/man3/encode.h.3
-- Installing: /home/peter/arm64-build/install/share/man/man3/types.h.3
↓ 95 lines
ASSISTANT

Now let's build zstd:

compile-bench> cd /home/peter/arm64-build && wget -q https://github.com/facebook/zstd/releases/download/v1.5.6/zstd-1.5.6.tar.gz && tar -xzf zstd-1.5.6.tar.gz
[empty output]
ASSISTANT
compile-bench> cd /home/peter/arm64-build/zstd-1.5.6/lib && make -j$(nproc) CC=aarch64-linux-gnu-gcc AR=aarch64-linux-gnu-ar CFLAGS="-static -fPIC" PREFIX=/home/peter/arm64-build/install libzstd.a && make install-static install-includes PREFIX=/home/peter/arm64-build/install
CC obj/conf_21ba01ff37f0d2c1b971ad9fe4e30b54/static/debug.o
CC obj/conf_21ba01ff37f0d2c1b971ad9fe4e30b54/static/entropy_common.o
CC obj/conf_21ba01ff37f0d2c1b971ad9fe4e30b54/static/error_private.o
CC obj/conf_21ba01ff37f0d2c1b971ad9fe4e30b54/static/fse_decompress.o
CC obj/conf_21ba01ff37f0d2c1b971ad9fe4e30b54/static/pool.o
CC obj/conf_21ba01ff37f0d2c1b971ad9fe4e30b54/static/threading.o
CC obj/conf_21ba01ff37f0d2c1b971ad9fe4e30b54/static/xxhash.o
CC obj/conf_21ba01ff37f0d2c1b971ad9fe4e30b54/static/zstd_common.o
CC obj/conf_21ba01ff37f0d2c1b971ad9fe4e30b54/static/zstd_v05.o
CC obj/conf_21ba01ff37f0d2c1b971ad9fe4e30b54/static/zstd_v06.o
CC obj/conf_21ba01ff37f0d2c1b971ad9fe4e30b54/static/zstd_v07.o
CC obj/conf_21ba01ff37f0d2c1b971ad9fe4e30b54/static/fse_compress.o
CC obj/conf_21ba01ff37f0d2c1b971ad9fe4e30b54/static/hist.o
CC obj/conf_21ba01ff37f0d2c1b971ad9fe4e30b54/static/huf_compress.o
CC obj/conf_21ba01ff37f0d2c1b971ad9fe4e30b54/static/zstd_compress.o
CC obj/conf_21ba01ff37f0d2c1b971ad9fe4e30b54/static/zstd_compress_literals.o
CC obj/conf_21ba01ff37f0d2c1b971ad9fe4e30b54/static/zstd_compress_sequences.o
CC obj/conf_21ba01ff37f0d2c1b971ad9fe4e30b54/static/zstd_compress_superblock.o
CC obj/conf_21ba01ff37f0d2c1b971ad9fe4e30b54/static/zstd_double_fast.o
CC obj/conf_21ba01ff37f0d2c1b971ad9fe4e30b54/static/zstd_fast.o
CC obj/conf_21ba01ff37f0d2c1b971ad9fe4e30b54/static/zstd_lazy.o
CC obj/conf_21ba01ff37f0d2c1b971ad9fe4e30b54/static/zstd_ldm.o
CC obj/conf_21ba01ff37f0d2c1b971ad9fe4e30b54/static/zstd_opt.o
CC obj/conf_21ba01ff37f0d2c1b971ad9fe4e30b54/static/zstdmt_compress.o
CC obj/conf_21ba01ff37f0d2c1b971ad9fe4e30b54/static/huf_decompress.o
CC obj/conf_21ba01ff37f0d2c1b971ad9fe4e30b54/static/zstd_ddict.o
CC obj/conf_21ba01ff37f0d2c1b971ad9fe4e30b54/static/zstd_decompress.o
CC obj/conf_21ba01ff37f0d2c1b971ad9fe4e30b54/static/zstd_decompress_block.o
AS obj/conf_21ba01ff37f0d2c1b971ad9fe4e30b54/static/huf_decompress_amd64.o
CC obj/conf_21ba01ff37f0d2c1b971ad9fe4e30b54/static/cover.o
CC obj/conf_21ba01ff37f0d2c1b971ad9fe4e30b54/static/divsufsort.o
CC obj/conf_21ba01ff37f0d2c1b971ad9fe4e30b54/static/fastcover.o
CC obj/conf_21ba01ff37f0d2c1b971ad9fe4e30b54/static/zdict.o
compiling single-threaded static library 1.5.6
Installing static library
Installing includes
↓ 37 lines
ASSISTANT

Great! Now we need to also install the zstd pkgconfig file:

compile-bench> cd /home/peter/arm64-build/zstd-1.5.6/lib && make install-pc PREFIX=/home/peter/arm64-build/install
creating pkgconfig
ASSISTANT

Now let's configure and build curl with all the required dependencies:

compile-bench> cd /home/peter/curl-8.16.0 && autoreconf -fi
libtoolize: putting auxiliary files in '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
libtoolize: copying file 'm4/libtool.m4'
libtoolize: copying file 'm4/ltoptions.m4'
libtoolize: copying file 'm4/ltsugar.m4'
libtoolize: copying file 'm4/ltversion.m4'
libtoolize: copying file 'm4/lt~obsolete.m4'
libtoolize: Remember to add 'LT_INIT' to configure.ac.
configure.ac:128: installing './compile'
configure.ac:134: installing './missing'
docs/examples/Makefile.am: installing './depcomp'
↓ 13 lines
ASSISTANT
compile-bench> cd /home/peter/curl-8.16.0 && export PKG_CONFIG_PATH=/home/peter/arm64-build/install/lib/pkgconfig:/home/peter/arm64-build/install/share/pkgconfig && export PKG_CONFIG_LIBDIR=/home/peter/arm64-build/install/lib/pkgconfig && export LIBS="-lpthread -ldl" && ./configure --host=aarch64-linux-gnu --prefix=/home/peter/result --with-openssl=/home/peter/arm64-build/install --with-zlib=/home/peter/arm64-build/install --with-brotli=/home/peter/arm64-build/install --with-zstd=/home/peter/arm64-build/install --enable-static --disable-shared --disable-ldap --disable-ldaps --disable-rtsp --disable-dict --disable-telnet --disable-tftp --disable-pop3 --disable-imap --disable-smtp --disable-gopher --disable-manual --without-libpsl --without-nghttp2 --disable-threaded-resolver LDFLAGS="-static -L/home/peter/arm64-build/install/lib" CPPFLAGS="-I/home/peter/arm64-build/install/include" CC=aarch64-linux-gnu-gcc AR=aarch64-linux-gnu-ar RANLIB=aarch64-linux-gnu-ranlib
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for a BSD-compatible install... /usr/bin/install -c
checking for aarch64-linux-gnu-gcc... aarch64-linux-gnu-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether aarch64-linux-gnu-gcc accepts -g... yes
checking for aarch64-linux-gnu-gcc option to enable C11 features... none needed
checking whether aarch64-linux-gnu-gcc understands -c and -o together... yes
checking how to run the C preprocessor... aarch64-linux-gnu-gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for aarch64-linux-gnu-strip... aarch64-linux-gnu-strip
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of aarch64-linux-gnu-gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... aarch64-unknown-linux-gnu
checking for grep that handles long lines an
[command output truncated]
gure: Configured to build curl/libcurl:

  Host setup:       aarch64-unknown-linux-gnu
  Install prefix:   /home/peter/result
  Compiler:         aarch64-linux-gnu-gcc
   CFLAGS:          -Werror-implicit-function-declaration -O2 -Wno-system-headers
   CFLAGS extras:   
   CPPFLAGS:        -isystem /home/peter/arm64-build/install/include -D_GNU_SOURCE -isystem /home/peter/arm64-build/install/include -isystem /home/peter/arm64-build/install/include -isystem /home/peter/arm64-build/install/include -isystem /home/peter/arm64-build/install/include
   LDFLAGS:         -static -L/home/peter/arm64-build/install/lib -L/home/peter/arm64-build/install/lib -L/home/peter/arm64-build/install/lib -L/home/peter/arm64-build/install/lib -L/home/peter/arm64-build/install/lib
     curl-config:   -L/home/peter/arm64-build/install/lib -L/home/peter/arm64-build/install/lib -L/home/peter/arm64-build/install/lib -L/home/peter/arm64-build/install/lib
   LIBS:            -lssl -lcrypto -lssl -lcrypto -lzstd -lzstd -lbrotlidec -lbrotlidec -lbrotlicommon -lz -lpthread -ldl

  curl version:     8.16.0
  SSL:              enabled (OpenSSL v3+)
  SSH:              no      (--with-{libssh,libssh2})
  zlib:             enabled
  brotli:           enabled (libbrotlidec)
  zstd:             enabled (libzstd)
  GSS-API:          no      (--with-gssapi)
  GSASL:            no      (libgsasl not found)
  TLS-SRP:          enabled
  resolver:         blocking (--enable-ares / --enable-threaded-resolver)
  IPv6:             enabled
  Unix sockets:     enabled
  IDN:              no      (--with-{libidn2,winidn})
  Build docs:       enabled (--disable-docs)
  Build libcurl:    Shared=no, Static=yes
  Built-in manual:  no      (--enable-manual)
  --libcurl option: enabled (--disable-libcurl-option)
  Verbose errors:   enabled (--disable-verbose)
  Code coverage:    disabled
  SSPI:             no      (--enable-sspi)
  ca cert bundle:   no
  ca cert path:     no
  ca cert embed:    no
  ca fallback:      no
  LDAP:             no      (--enable-ldap / --with-ldap-lib / --with-lber-lib)
  LDAPS:            no      (--enable-ldaps)
  IPFS/IPNS:        enabled
  RTSP:             no      (--enable-rtsp)
  RTMP:             no      (--with-librtmp)
  PSL:              no      (--with-libpsl)
  Alt-svc:          enabled (--disable-alt-svc)
  Headers API:      enabled (--disable-headers-api)
  HSTS:             enabled (--disable-hsts)
  HTTP1:            enabled (internal)
  HTTP2:            no      (--with-nghttp2)
  HTTP3:            no      (--with-ngtcp2 --with-nghttp3, --with-quiche, --with-openssl-quic)
  ECH:              no      (--enable-ech)
  HTTPS RR:         no      (--enable-httpsrr)
  SSLS-EXPORT:      no      (--enable-ssls-export)
  Protocols:        file ftp ftps http https ipfs ipns mqtt smb smbs ws wss
  Features:         alt-svc brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM SSL threadsafe TLS-SRP UnixSockets zstd
↓ 119 lines
ASSISTANT

Perfect! The configuration looks good - it has SSL (OpenSSL v3+), brotli, zlib, and zstd enabled. Now let's compile:

compile-bench> cd /home/peter/curl-8.16.0 && make -j$(nproc)
Making all in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make  all-am
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
  CC       libcurl_la-altsvc.lo
  CC       libcurl_la-amigaos.lo
  CC       libcurl_la-asyn-ares.lo
  CC       libcurl_la-asyn-base.lo
  CC       libcurl_la-asyn-thrdd.lo
  CC       libcurl_la-bufq.lo
  CC       libcurl_la-bufref.lo
  CC       libcurl_la-cf-h1-proxy.lo
  CC       libcurl_la-cf-h2-proxy.lo
  CC       libcurl_la-cf-haproxy.lo
  CC       libcurl_la-cf-https-connect.lo
  CC       libcurl_la-cf-ip-happy.lo
  CC       libcurl_la-cf-socket.lo
  CC       libcurl_la-cfilters.lo
  CC       libcurl_la-conncache.lo
  CC       libcurl_la-connect.lo
  CC       libcurl_la-content_encoding.lo
  CC       libcurl_la-cookie.lo
  CC       libcurl_la-cshutdn.lo
  CC       libcurl_la-curl_addrinfo.lo
  CC       libcurl_la-curl_des.lo
  CC       libcurl_la-curl_endian.lo
  CC       libcurl_la-curl_fnmatch.lo
  CC       libcurl_la-curl_get_line.lo
  CC       libcurl_la-curl_gethostname.lo
  CC       libcurl_la-curl_gssapi.lo
  CC       libcurl_la-curl_memrchr.lo
  CC       libcurl_la-curl_ntlm_core.lo
  CC       libcurl_la-curl_range.lo
  CC       libcurl_la-curl_rtmp.lo
  CC       libcurl_la-curl_sasl.lo
  CC       libcurl_la-curl_sha512_256.lo
  CC       libcurl_la-curl_sspi.lo
  CC       libcurl_la-curl_threads.lo
  CC       libcurl_la-curl_trc.lo
  CC       libcurl_la-cw-out.lo
  CC       libcurl_la-cw-pause.lo
  CC       libcurl_la-dict.lo
  CC       libcurl_la-doh.lo
  CC       libcurl_la-dynhds.lo
  CC       libcurl_la-easy.lo
  CC       libcurl_la-easygetopt.lo
  CC       libcurl_la-easyoptions.lo
  CC       libcurl_la-escape.lo
  CC       libcurl_la-fake_addrinfo.lo
  CC       libcurl_la-file.lo
  CC       libcurl_la-fileinfo.lo
  CC       libcurl_la-fopen.lo
  CC       libcurl_la-formdata.lo
  CC       libcurl_la-ftp.lo
  CC       libcurl_la-ftplistparser.lo
  CC       libcurl_la-getenv.lo
  CC       libcurl_la-getinfo.lo
  CC       libcurl_la-gopher.lo
  CC       libcurl_la-hash.lo
  CC       libcurl_la-headers.lo
  CC       libcurl_la-hmac.lo
  CC       libcurl_la-hostip.lo
  CC       libcurl_la-hostip4.lo
  CC       libcurl_la-hostip6.lo
  CC       libcurl_la-hsts.lo
  CC       libcurl_la-http.lo
  CC       libcurl_la-http1.lo
  CC       libcurl_la-http2.lo
  CC       libcurl_la-http_aws_sigv4.lo
  CC       libcurl_la-http_chunks.lo
[command output truncated]
  CC       curl-tool_ssls.o
  CC       curl-tool_stderr.o
  CC       curl-tool_strdup.o
  CC       curl-tool_urlglob.o
  CC       curl-tool_util.o
  CC       curl-tool_vms.o
  CC       curl-tool_writeout.o
  CC       curl-tool_writeout_json.o
  CC       curl-tool_xattr.o
  CC       curl-var.o
  CC       curl-tool_hugehelp.o
echo '/* !checksrc! disable COPYRIGHT all */' > tool_ca_embed.c
echo 'extern const void *curl_ca_embed; const void *curl_ca_embed;' >> tool_ca_embed.c
  CC       curlinfo.o
  CC       libcurltool_la-config2setopts.lo
  CC       libcurltool_la-slist_wc.lo
  CC       libcurltool_la-terminal.lo
  CC       libcurltool_la-tool_bname.lo
  CC       libcurltool_la-tool_cb_dbg.lo
  CC       libcurltool_la-tool_cb_hdr.lo
  CC       libcurltool_la-tool_cb_prg.lo
  CC       libcurltool_la-tool_cb_rea.lo
  CC       libcurltool_la-tool_cb_see.lo
  CC       libcurltool_la-tool_cb_soc.lo
  CC       libcurltool_la-tool_cb_wrt.lo
  CC       libcurltool_la-tool_cfgable.lo
  CC       libcurltool_la-tool_dirhie.lo
  CC       libcurltool_la-tool_doswin.lo
  CC       libcurltool_la-tool_easysrc.lo
  CC       libcurltool_la-tool_filetime.lo
  CC       libcurltool_la-tool_findfile.lo
  CC       libcurltool_la-tool_formparse.lo
  CC       libcurltool_la-tool_getparam.lo
  CC       libcurltool_la-tool_getpass.lo
  CC       libcurltool_la-tool_help.lo
  CC       libcurltool_la-tool_helpers.lo
  CC       libcurltool_la-tool_ipfs.lo
  CC       libcurltool_la-tool_libinfo.lo
  CC       libcurltool_la-tool_listhelp.lo
  CC       libcurltool_la-tool_main.lo
  CC       libcurltool_la-tool_msgs.lo
  CC       libcurltool_la-tool_operate.lo
  CC       libcurltool_la-tool_operhlp.lo
  CC       libcurltool_la-tool_paramhlp.lo
  CC       libcurltool_la-tool_parsecfg.lo
  CC       libcurltool_la-tool_progress.lo
  CC       libcurltool_la-tool_setopt.lo
  CC       libcurltool_la-tool_ssls.lo
  CC       libcurltool_la-tool_stderr.lo
  CC       libcurltool_la-tool_strdup.lo
  CC       libcurltool_la-tool_urlglob.lo
  CC       libcurltool_la-tool_util.lo
  CC       libcurltool_la-tool_vms.lo
  CC       libcurltool_la-tool_writeout.lo
  CC       libcurltool_la-tool_writeout_json.lo
  CC       libcurltool_la-tool_xattr.lo
  CC       libcurltool_la-var.lo
  CC       curl-tool_ca_embed.o
  CCLD     curlinfo
  CCLD     curl
  CCLD     libcurltool.la
make[1]: Leaving directory '/home/peter/curl-8.16.0/src'
Making all in scripts
make[1]: Entering directory '/home/peter/curl-8.16.0/scripts'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/home/peter/curl-8.16.0/scripts'
make[1]: Entering directory '/home/peter/curl-8.16.0'
make[1]: Nothing to be done for 'all-am'.
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 141 lines
ASSISTANT

Great! Now let's install curl:

compile-bench> cd /home/peter/curl-8.16.0 && make install
Making install in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
 /usr/bin/mkdir -p '/home/peter/result/lib'
 /bin/bash ../libtool   --mode=install /usr/bin/install -c   libcurl.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libcurl.lai /home/peter/result/lib/libcurl.la
libtool: install: /usr/bin/install -c .libs/libcurl.a /home/peter/result/lib/libcurl.a
libtool: install: chmod 644 /home/peter/result/lib/libcurl.a
libtool: install: aarch64-linux-gnu-ranlib /home/peter/result/lib/libcurl.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /home/peter/result/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/peter/curl-8.16.0/lib'
make[1]: Leaving directory '/home/peter/curl-8.16.0/lib'
Making install in docs
make[1]: Entering directory '/home/peter/curl-8.16.0/docs'
Making install in .
make[2]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /usr/bin/install -c -m 644 curl-config.1 wcurl.1 '/home/peter/result/share/man/man1'
make[3]: Leaving directory '/home/peter/curl-8.16.0/docs'
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs'
Making install in cmdline-opts
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /usr/bin/install -c -m 644 curl.1 '/home/peter/result/share/man/man1'
make[3]: Leaving directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
Making install in libcurl
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
Making install in opts
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl/
[command output truncated]
ng directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/aclocal'
 /usr/bin/install -c -m 644 libcurl.m4 '/home/peter/result/share/aclocal'
 /usr/bin/mkdir -p '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_easy_cleanup.3 curl_easy_duphandle.3 curl_easy_escape.3 curl_easy_getinfo.3 curl_easy_header.3 curl_easy_init.3 curl_easy_nextheader.3 curl_easy_option_by_id.3 curl_easy_option_by_name.3 curl_easy_option_next.3 curl_easy_pause.3 curl_easy_perform.3 curl_easy_recv.3 curl_easy_reset.3 curl_easy_send.3 curl_easy_setopt.3 curl_easy_ssls_export.3 curl_easy_ssls_import.3 curl_easy_strerror.3 curl_easy_unescape.3 curl_easy_upkeep.3 curl_escape.3 curl_formadd.3 curl_formfree.3 curl_formget.3 curl_free.3 curl_getdate.3 curl_getenv.3 curl_global_cleanup.3 curl_global_init.3 curl_global_init_mem.3 curl_global_sslset.3 curl_global_trace.3 curl_mime_addpart.3 curl_mime_data.3 curl_mime_data_cb.3 curl_mime_encoder.3 curl_mime_filedata.3 curl_mime_filename.3 curl_mime_free.3 '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_mime_headers.3 curl_mime_init.3 curl_mime_name.3 curl_mime_subparts.3 curl_mime_type.3 curl_mprintf.3 curl_multi_add_handle.3 curl_multi_assign.3 curl_multi_cleanup.3 curl_multi_fdset.3 curl_multi_get_handles.3 curl_multi_get_offt.3 curl_multi_info_read.3 curl_multi_init.3 curl_multi_perform.3 curl_multi_poll.3 curl_multi_remove_handle.3 curl_multi_setopt.3 curl_multi_socket.3 curl_multi_socket_action.3 curl_multi_socket_all.3 curl_multi_strerror.3 curl_multi_timeout.3 curl_multi_wait.3 curl_multi_waitfds.3 curl_multi_wakeup.3 curl_pushheader_byname.3 curl_pushheader_bynum.3 curl_share_cleanup.3 curl_share_init.3 curl_share_setopt.3 curl_share_strerror.3 curl_slist_append.3 curl_slist_free_all.3 curl_strequal.3 curl_strnequal.3 curl_unescape.3 curl_url.3 curl_url_cleanup.3 curl_url_dup.3 '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_url_get.3 curl_url_set.3 curl_url_strerror.3 curl_version.3 curl_version_info.3 curl_ws_meta.3 curl_ws_recv.3 curl_ws_send.3 curl_ws_start_frame.3 libcurl-easy.3 libcurl-env-dbg.3 libcurl-env.3 libcurl-errors.3 libcurl-multi.3 libcurl-security.3 libcurl-share.3 libcurl-symbols.3 libcurl-thread.3 libcurl-tutorial.3 libcurl-url.3 libcurl-ws.3 libcurl.3 '/home/peter/result/share/man/man3'
make[6]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[4]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[3]: Leaving directory '/home/peter/curl-8.16.0'
make[2]: Leaving directory '/home/peter/curl-8.16.0'
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 72 lines
ASSISTANT

Now let's create the symlink as requested:

compile-bench> ln -sf /home/peter/result/bin/curl /home/peter/result/curl && ls -la /home/peter/result/
total 24
drwxr-xr-x 6 peter peter 4096 Sep 29 18:12 .
drwxr-x--- 1 peter peter 4096 Sep 29 18:10 ..
drwxr-xr-x 2 peter peter 4096 Sep 29 18:12 bin
lrwxrwxrwx 1 peter peter   27 Sep 29 18:12 curl -> /home/peter/result/bin/curl
drwxr-xr-x 3 peter peter 4096 Sep 29 18:12 include
drwxr-xr-x 3 peter peter 4096 Sep 29 18:12 lib
drwxr-xr-x 4 peter peter 4096 Sep 29 18:12 share
↓ 9 lines
ASSISTANT

Perfect! Now let's verify the binary is statically compiled for arm64 and check its features:

compile-bench> file /home/peter/result/bin/curl
/home/peter/result/bin/curl: ELF 64-bit LSB pie executable, ARM aarch64, version 1 (SYSV), dynamically linked, interpreter /lib/ld-linux-aarch64.so.1, BuildID[sha1]=acceb079ce07b2c30febc0a8c4f4d62d6a9b7193, for GNU/Linux 3.7.0, not stripped
ASSISTANT

I see it's still dynamically linked. We need to add more flags to make it fully static. Let me rebuild with the proper static linking flags:

compile-bench> cd /home/peter/curl-8.16.0 && make clean
Making clean in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
test -z "unitprotos.h" || rm -f unitprotos.h
test -z "libcurl.la" || rm -f libcurl.la
rm -f ./so_locations
rm -rf .libs _libs
rm -rf curlx/.libs curlx/_libs
rm -rf vauth/.libs vauth/_libs
rm -rf vquic/.libs vquic/_libs
rm -rf vssh/.libs vssh/_libs
rm -rf vtls/.libs vtls/_libs
test -z "libcurlu.la" || rm -f libcurlu.la
rm -f ./so_locations
rm -f *.o
rm -f curlx/*.o
rm -f curlx/*.lo
rm -f vauth/*.o
rm -f vauth/*.lo
rm -f vquic/*.o
rm -f vquic/*.lo
rm -f vssh/*.o
rm -f vssh/*.lo
rm -f vtls/*.o
rm -f vtls/*.lo
rm -f *.lo
make[1]: Leaving directory '/home/peter/curl-8.16.0/lib'
Making clean in docs
make[1]: Entering directory '/home/peter/curl-8.16.0/docs'
Making clean in .
make[2]: Entering directory '/home/peter/curl-8.16.0/docs'
test -z "mk-ca-bundle.1 curl-config.1 wcurl.1 runtests.1 testcurl.1" || rm -f mk-ca-bundle.1 curl-config.1 wcurl.1 runtests.1 testcurl.1
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs'
Making clean in cmdline-opts
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
test -z "curl.1 curl.txt" || rm -f curl.1 curl.txt
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
Making clean in libcurl
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
Making clean in opts
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
test -z "CURLINFO_ACTIVESOCKET.3 CURLINFO_APPCONNECT_TIME.3 CURLINFO_APPCONNECT_TIME_T.3 CURLINFO_CAINFO.3 CURLINFO_CAPATH.3 CURLINFO_CERTINFO.3 CURLINFO_CONDITION_UNMET.3 CURLINFO_CONNECT_TIME.3 CURLINFO_CONN_ID.3 CURLINFO_CONNECT_TIME_T.3 CURLINFO_CONTENT_LENGTH_DOWNLOAD.3 CURLINFO_CONTENT_LENGTH_DOWNLOAD_T.3 CURLINFO_CONTENT_LENGTH_UPLOAD.3 CURLINFO_CONTENT_LENGTH_UPLOAD_T.3 CURLINFO_CONTENT_TYPE.3 CURLINFO_COOKIELIST.3 CURLINFO_EARLYDATA_SENT_T.3 CURLINFO_EFFECTIVE_METHOD.3 CURLINFO_EFFECTIVE_URL.3 CURLINFO_FILETIME.3 CURLINFO_FILETIME_T.3 CURLINFO_FTP_ENTRY_PATH.3 CURLINFO_HEADER_SIZE.3 CURLINFO_HTTP_CONNECTCODE.3 CURLINFO_HTTP_VERSION.3 CURLINFO_HTTPAUTH_AVAIL.3 CURLINFO_HTTPAUTH_USED.3 CURLINFO_LASTSOCKET.3 CURLINFO_LOCAL_IP.3 CURLINFO_LOCAL_PORT.3 CURLINFO_NAMELOOKUP_TIME.3 CURLINFO_NAMELOOKUP_TIME_T.3 CURLINFO_NUM_CONNECTS.3 CURLINFO_OS_ERRNO.3 CURLINFO_PRETRANSFER_TIME.3 CURLINFO_PRETRANSFER_TIME_T.3 CURLINFO_POSTTRANSFER_TIME_T.3 CURLINFO_PRIMARY_IP.3 CURLINFO_PRIMARY_PORT.3 CURLINFO_PRIVATE.3 CURLINFO_PROTOCOL.3 CURLINFO_PROXY_ERROR.3 CURLINFO_PROXY_SSL_VERIFYRESULT.3 CURLINFO_PROXYAUTH_AVAIL.3 CURLINFO_PROXYAUTH_USED.3 CURLINFO_QUEUE_TIME_T.3 CURLINFO_REDIRECT_COUNT.3 CURLINFO_REDIRECT_TIME.3 CURLINFO_REDIRECT_TIME_T.3 CURLINFO_REDIRECT_URL.3 CURLINFO_REFERER.3 CURLINFO_REQUEST_SIZE.3 CURLINFO_RESPONSE_CODE.3 CURLINFO_RETRY_AFTER.3 CURLINFO_RTSP_CLIENT_CSEQ.3 CURLINFO_RTSP_CSEQ_RECV.3 CURLINFO_RTSP_SERVER_CSEQ.3 CURLINFO_RTSP_SESSION_ID.3 CUR
[command output truncated]
rt test-ca.crt test-ca.key test-localhost.crl test-localhost.crt test-localhost.key test-localhost.pem test-localhost.pub.der test-localhost.pub.pem test-localhost.nn.crl test-localhost.nn.crt test-localhost.nn.key test-localhost.nn.pem test-localhost.nn.pub.der test-localhost.nn.pub.pem test-localhost0h.crl test-localhost0h.crt test-localhost0h.key test-localhost0h.pem test-localhost0h.pub.der test-localhost0h.pub.pem test-localhost-san-first.crl test-localhost-san-first.crt test-localhost-san-first.key test-localhost-san-first.pem test-localhost-san-first.pub.der test-localhost-san-first.pub.pem test-localhost-san-last.crl test-localhost-san-last.crt test-localhost-san-last.key test-localhost-san-last.pem test-localhost-san-last.pub.der test-localhost-san-last.pub.pem test-client-cert.crl test-client-cert.crt test-client-cert.key test-client-cert.pem test-client-cert.pub.der test-client-cert.pub.pem \
  test-*.csr \
  test-*.der \
  test-*.keyenc \
  test-ca.cnt* \
  test-ca.db* \
  test-ca.raw* \
  test-ca.srl
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/certs'
Making clean in data
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/data'
rm -rf .libs _libs
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/data'
Making clean in server
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/server'
test -z "servers.c" || rm -f servers.c
rm -rf .libs _libs
rm -f servers
 rm -f servers
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/server'
Making clean in libtest
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/libtest'
test -z "libtests.c lib1521.c" || rm -f libtests.c lib1521.c
rm -rf .libs _libs
rm -f libtests
 rm -f libtests
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/libtest'
Making clean in http
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/http'
rm -rf .libs _libs
rm -rf *.pyc __pycache__
rm -rf gen
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/http'
Making clean in unit
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/unit'
test -z "units.c" || rm -f units.c
rm -rf .libs _libs
rm -f units
 rm -f units
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/unit'
Making clean in tunit
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/tunit'
test -z "tunits.c" || rm -f tunits.c
rm -rf .libs _libs
rm -f tunits
 rm -f tunits
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/tunit'
make[3]: Entering directory '/home/peter/curl-8.16.0/tests'
test -z ".http.pid .https.pid .ftp.pid .ftps.pid" || rm -f .http.pid .https.pid .ftp.pid .ftps.pid
rm -rf .libs _libs
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests'
make[2]: Leaving directory '/home/peter/curl-8.16.0/tests'
rm -f *.lo
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 113 lines
ASSISTANT
compile-bench> cd /home/peter/curl-8.16.0 && export PKG_CONFIG_PATH=/home/peter/arm64-build/install/lib/pkgconfig:/home/peter/arm64-build/install/share/pkgconfig && export PKG_CONFIG_LIBDIR=/home/peter/arm64-build/install/lib/pkgconfig && export LIBS="-lpthread -ldl" && ./configure --host=aarch64-linux-gnu --prefix=/home/peter/result --with-openssl=/home/peter/arm64-build/install --with-zlib=/home/peter/arm64-build/install --with-brotli=/home/peter/arm64-build/install --with-zstd=/home/peter/arm64-build/install --enable-static --disable-shared --disable-ldap --disable-ldaps --disable-rtsp --disable-dict --disable-telnet --disable-tftp --disable-pop3 --disable-imap --disable-smtp --disable-gopher --disable-manual --without-libpsl --without-nghttp2 --disable-threaded-resolver LDFLAGS="-static -L/home/peter/arm64-build/install/lib -all-static" CPPFLAGS="-I/home/peter/arm64-build/install/include" CC=aarch64-linux-gnu-gcc AR=aarch64-linux-gnu-ar RANLIB=aarch64-linux-gnu-ranlib
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for a BSD-compatible install... /usr/bin/install -c
checking for aarch64-linux-gnu-gcc... aarch64-linux-gnu-gcc
checking whether the C compiler works... no
configure: error: in `/home/peter/curl-8.16.0':
configure: error: C compiler cannot create executables
See `config.log' for more details
↓ 24 lines
ASSISTANT

The -all-static flag is causing issues. Let me use a different approach with proper static linking:

compile-bench> cd /home/peter/curl-8.16.0 && export PKG_CONFIG_PATH=/home/peter/arm64-build/install/lib/pkgconfig:/home/peter/arm64-build/install/share/pkgconfig && export PKG_CONFIG_LIBDIR=/home/peter/arm64-build/install/lib/pkgconfig && ./configure --host=aarch64-linux-gnu --prefix=/home/peter/result --with-openssl=/home/peter/arm64-build/install --with-zlib=/home/peter/arm64-build/install --with-brotli=/home/peter/arm64-build/install --with-zstd=/home/peter/arm64-build/install --enable-static --disable-shared --disable-ldap --disable-ldaps --disable-rtsp --disable-dict --disable-telnet --disable-tftp --disable-pop3 --disable-imap --disable-smtp --disable-gopher --disable-manual --without-libpsl --without-nghttp2 --disable-threaded-resolver LDFLAGS="-static -L/home/peter/arm64-build/install/lib" LIBS="-lssl -lcrypto -lbrotlidec -lbrotlicommon -lzstd -lz -lpthread -ldl" CPPFLAGS="-I/home/peter/arm64-build/install/include" CC=aarch64-linux-gnu-gcc AR=aarch64-linux-gnu-ar RANLIB=aarch64-linux-gnu-ranlib
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for a BSD-compatible install... /usr/bin/install -c
checking for aarch64-linux-gnu-gcc... aarch64-linux-gnu-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether aarch64-linux-gnu-gcc accepts -g... yes
checking for aarch64-linux-gnu-gcc option to enable C11 features... none needed
checking whether aarch64-linux-gnu-gcc understands -c and -o together... yes
checking how to run the C preprocessor... aarch64-linux-gnu-gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for aarch64-linux-gnu-strip... aarch64-linux-gnu-strip
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of aarch64-linux-gnu-gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... aarch64-unknown-linux-gnu
checking for grep that handles long lines an
[command output truncated]
up:       aarch64-unknown-linux-gnu
  Install prefix:   /home/peter/result
  Compiler:         aarch64-linux-gnu-gcc
   CFLAGS:          -Werror-implicit-function-declaration -O2 -Wno-system-headers
   CFLAGS extras:   
   CPPFLAGS:        -isystem /home/peter/arm64-build/install/include -D_GNU_SOURCE -isystem /home/peter/arm64-build/install/include -isystem /home/peter/arm64-build/install/include -isystem /home/peter/arm64-build/install/include -isystem /home/peter/arm64-build/install/include
   LDFLAGS:         -static -L/home/peter/arm64-build/install/lib -L/home/peter/arm64-build/install/lib -L/home/peter/arm64-build/install/lib -L/home/peter/arm64-build/install/lib -L/home/peter/arm64-build/install/lib
     curl-config:   -L/home/peter/arm64-build/install/lib -L/home/peter/arm64-build/install/lib -L/home/peter/arm64-build/install/lib -L/home/peter/arm64-build/install/lib
   LIBS:            -lssl -lcrypto -lssl -lcrypto -lzstd -lzstd -lbrotlidec -lbrotlidec -lbrotlicommon -lz -lssl -lcrypto -lbrotlidec -lbrotlicommon -lzstd -lz -lpthread -ldl

  curl version:     8.16.0
  SSL:              enabled (OpenSSL v3+)
  SSH:              no      (--with-{libssh,libssh2})
  zlib:             enabled
  brotli:           enabled (libbrotlidec)
  zstd:             enabled (libzstd)
  GSS-API:          no      (--with-gssapi)
  GSASL:            no      (libgsasl not found)
  TLS-SRP:          enabled
  resolver:         blocking (--enable-ares / --enable-threaded-resolver)
  IPv6:             enabled
  Unix sockets:     enabled
  IDN:              no      (--with-{libidn2,winidn})
  Build docs:       enabled (--disable-docs)
  Build libcurl:    Shared=no, Static=yes
  Built-in manual:  no      (--enable-manual)
  --libcurl option: enabled (--disable-libcurl-option)
  Verbose errors:   enabled (--disable-verbose)
  Code coverage:    disabled
  SSPI:             no      (--enable-sspi)
  ca cert bundle:   no
  ca cert path:     no
  ca cert embed:    no
  ca fallback:      no
  LDAP:             no      (--enable-ldap / --with-ldap-lib / --with-lber-lib)
  LDAPS:            no      (--enable-ldaps)
  IPFS/IPNS:        enabled
  RTSP:             no      (--enable-rtsp)
  RTMP:             no      (--with-librtmp)
  PSL:              no      (--with-libpsl)
  Alt-svc:          enabled (--disable-alt-svc)
  Headers API:      enabled (--disable-headers-api)
  HSTS:             enabled (--disable-hsts)
  HTTP1:            enabled (internal)
  HTTP2:            no      (--with-nghttp2)
  HTTP3:            no      (--with-ngtcp2 --with-nghttp3, --with-quiche, --with-openssl-quic)
  ECH:              no      (--enable-ech)
  HTTPS RR:         no      (--enable-httpsrr)
  SSLS-EXPORT:      no      (--enable-ssls-export)
  Protocols:        file ftp ftps http https ipfs ipns mqtt smb smbs ws wss
  Features:         alt-svc brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM SSL threadsafe TLS-SRP UnixSockets zstd
↓ 117 lines
ASSISTANT

Good! Now let's compile with static linking:

compile-bench> cd /home/peter/curl-8.16.0 && make -j$(nproc)
Making all in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make  all-am
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
  CC       vauth/libcurl_la-cleartext.lo
  CC       vauth/libcurl_la-cram.lo
  CC       vauth/libcurl_la-digest.lo
  CC       vauth/libcurl_la-digest_sspi.lo
  CC       vauth/libcurl_la-gsasl.lo
  CC       vauth/libcurl_la-krb5_gssapi.lo
  CC       vauth/libcurl_la-krb5_sspi.lo
  CC       vauth/libcurl_la-ntlm.lo
  CC       vauth/libcurl_la-ntlm_sspi.lo
  CC       vauth/libcurl_la-oauth2.lo
  CC       vauth/libcurl_la-spnego_gssapi.lo
  CC       vauth/libcurl_la-spnego_sspi.lo
  CC       vauth/libcurl_la-vauth.lo
  CC       vtls/libcurl_la-cipher_suite.lo
  CC       vtls/libcurl_la-gtls.lo
  CC       vtls/libcurl_la-hostcheck.lo
  CC       vtls/libcurl_la-keylog.lo
  CC       vtls/libcurl_la-mbedtls.lo
  CC       vtls/libcurl_la-mbedtls_threadlock.lo
  CC       vtls/libcurl_la-openssl.lo
  CC       vtls/libcurl_la-rustls.lo
  CC       vtls/libcurl_la-schannel.lo
  CC       vtls/libcurl_la-schannel_verify.lo
  CC       vtls/libcurl_la-vtls.lo
  CC       vtls/libcurl_la-vtls_scache.lo
  CC       vtls/libcurl_la-vtls_spack.lo
  CC       vtls/libcurl_la-wolfssl.lo
  CC       vtls/libcurl_la-x509asn1.lo
  CC       vquic/libcurl_la-curl_ngtcp2.lo
  CC       vquic/libcurl_la-curl_osslq.lo
  CC       vquic/libcurl_la-curl_quiche.lo
  CC       vquic/libcurl_la-vquic.lo
  CC       vquic/libcurl_la-vquic-tls.lo
  CC       vssh/libcurl_la-libssh.lo
  CC       vssh/libcurl_la-libssh2.lo
  CC       vssh/libcurl_la-curl_path.lo
  CC       vssh/libcurl_la-wolfssh.lo
  CC       curlx/libcurl_la-base64.lo
  CC       curlx/libcurl_la-dynbuf.lo
  CC       curlx/libcurl_la-inet_ntop.lo
  CC       curlx/libcurl_la-inet_pton.lo
  CC       curlx/libcurl_la-multibyte.lo
  CC       curlx/libcurl_la-nonblock.lo
  CC       curlx/libcurl_la-strparse.lo
  CC       curlx/libcurl_la-timediff.lo
  CC       curlx/libcurl_la-timeval.lo
  CC       curlx/libcurl_la-version_win32.lo
  CC       curlx/libcurl_la-wait.lo
  CC       curlx/libcurl_la-warnless.lo
  CC       curlx/libcurl_la-winapi.lo
  CC       libcurlu_la-altsvc.lo
  CC       libcurlu_la-amigaos.lo
  CC       libcurlu_la-asyn-ares.lo
  CC       libcurlu_la-asyn-base.lo
  CC       libcurlu_la-asyn-thrdd.lo
  CC       libcurlu_la-bufq.lo
  CC       libcurlu_la-bufref.lo
  CC       libcurlu_la-cf-h1-proxy.lo
  CC       libcurlu_la-cf-h2-proxy.lo
  CC       libcurlu_la-cf-haproxy.lo
  CC       libcurlu_la-cf-https-connect.lo
  CC       libcurlu_la-cf-ip-happy.lo
  CC       libcurlu_la-cf-socket.lo
  CC       libcurlu_la-cfilters.lo
  CC       libcurlu_la-conncache.lo
  CC       libcurlu_la-connect.lo
[command output truncated]
  CC       curl-tool_strdup.o
  CC       curl-tool_urlglob.o
  CC       curl-tool_util.o
  CC       curl-tool_vms.o
  CC       curl-tool_writeout.o
  CC       curl-tool_writeout_json.o
  CC       curl-tool_xattr.o
  CC       curl-var.o
echo '/* !checksrc! disable COPYRIGHT all */' > tool_hugehelp.c;   \
echo '#include "tool_hugehelp.h"' >> tool_hugehelp.c
echo '/* !checksrc! disable COPYRIGHT all */' > tool_ca_embed.c
echo 'extern const void *curl_ca_embed; const void *curl_ca_embed;' >> tool_ca_embed.c
  CC       curlinfo.o
  CC       libcurltool_la-config2setopts.lo
  CC       libcurltool_la-slist_wc.lo
  CC       libcurltool_la-terminal.lo
  CC       libcurltool_la-tool_bname.lo
  CC       libcurltool_la-tool_cb_dbg.lo
  CC       libcurltool_la-tool_cb_hdr.lo
  CC       libcurltool_la-tool_cb_prg.lo
  CC       libcurltool_la-tool_cb_rea.lo
  CC       libcurltool_la-tool_cb_see.lo
  CC       libcurltool_la-tool_cb_soc.lo
  CC       libcurltool_la-tool_cb_wrt.lo
  CC       libcurltool_la-tool_cfgable.lo
  CC       libcurltool_la-tool_dirhie.lo
  CC       libcurltool_la-tool_doswin.lo
  CC       libcurltool_la-tool_easysrc.lo
  CC       libcurltool_la-tool_filetime.lo
  CC       libcurltool_la-tool_findfile.lo
  CC       libcurltool_la-tool_formparse.lo
  CC       libcurltool_la-tool_getparam.lo
  CC       libcurltool_la-tool_getpass.lo
  CC       libcurltool_la-tool_help.lo
  CC       libcurltool_la-tool_helpers.lo
  CC       libcurltool_la-tool_ipfs.lo
  CC       libcurltool_la-tool_libinfo.lo
  CC       libcurltool_la-tool_listhelp.lo
  CC       libcurltool_la-tool_main.lo
  CC       libcurltool_la-tool_msgs.lo
  CC       libcurltool_la-tool_operate.lo
  CC       libcurltool_la-tool_operhlp.lo
  CC       libcurltool_la-tool_paramhlp.lo
  CC       libcurltool_la-tool_parsecfg.lo
  CC       libcurltool_la-tool_progress.lo
  CC       libcurltool_la-tool_setopt.lo
  CC       libcurltool_la-tool_ssls.lo
  CC       libcurltool_la-tool_stderr.lo
  CC       libcurltool_la-tool_strdup.lo
  CC       libcurltool_la-tool_urlglob.lo
  CC       libcurltool_la-tool_util.lo
  CC       libcurltool_la-tool_vms.lo
  CC       libcurltool_la-tool_writeout.lo
  CC       libcurltool_la-tool_writeout_json.lo
  CC       libcurltool_la-tool_xattr.lo
  CC       libcurltool_la-var.lo
  CC       curl-tool_hugehelp.o
  CC       curl-tool_ca_embed.o
  CCLD     curlinfo
  CCLD     curl
  CCLD     libcurltool.la
make[1]: Leaving directory '/home/peter/curl-8.16.0/src'
Making all in scripts
make[1]: Entering directory '/home/peter/curl-8.16.0/scripts'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/home/peter/curl-8.16.0/scripts'
make[1]: Entering directory '/home/peter/curl-8.16.0'
make[1]: Nothing to be done for 'all-am'.
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 141 lines
ASSISTANT

Now let's install it again:

compile-bench> cd /home/peter/curl-8.16.0 && make install
Making install in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
 /usr/bin/mkdir -p '/home/peter/result/lib'
 /bin/bash ../libtool   --mode=install /usr/bin/install -c   libcurl.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libcurl.lai /home/peter/result/lib/libcurl.la
libtool: install: /usr/bin/install -c .libs/libcurl.a /home/peter/result/lib/libcurl.a
libtool: install: chmod 644 /home/peter/result/lib/libcurl.a
libtool: install: aarch64-linux-gnu-ranlib /home/peter/result/lib/libcurl.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /home/peter/result/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/peter/curl-8.16.0/lib'
make[1]: Leaving directory '/home/peter/curl-8.16.0/lib'
Making install in docs
make[1]: Entering directory '/home/peter/curl-8.16.0/docs'
Making install in .
make[2]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /usr/bin/install -c -m 644 curl-config.1 wcurl.1 '/home/peter/result/share/man/man1'
make[3]: Leaving directory '/home/peter/curl-8.16.0/docs'
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs'
Making install in cmdline-opts
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /usr/bin/install -c -m 644 curl.1 '/home/peter/result/share/man/man1'
make[3]: Leaving directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
Making install in libcurl
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
Making install in opts
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl/
[command output truncated]
ng directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/aclocal'
 /usr/bin/install -c -m 644 libcurl.m4 '/home/peter/result/share/aclocal'
 /usr/bin/mkdir -p '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_easy_cleanup.3 curl_easy_duphandle.3 curl_easy_escape.3 curl_easy_getinfo.3 curl_easy_header.3 curl_easy_init.3 curl_easy_nextheader.3 curl_easy_option_by_id.3 curl_easy_option_by_name.3 curl_easy_option_next.3 curl_easy_pause.3 curl_easy_perform.3 curl_easy_recv.3 curl_easy_reset.3 curl_easy_send.3 curl_easy_setopt.3 curl_easy_ssls_export.3 curl_easy_ssls_import.3 curl_easy_strerror.3 curl_easy_unescape.3 curl_easy_upkeep.3 curl_escape.3 curl_formadd.3 curl_formfree.3 curl_formget.3 curl_free.3 curl_getdate.3 curl_getenv.3 curl_global_cleanup.3 curl_global_init.3 curl_global_init_mem.3 curl_global_sslset.3 curl_global_trace.3 curl_mime_addpart.3 curl_mime_data.3 curl_mime_data_cb.3 curl_mime_encoder.3 curl_mime_filedata.3 curl_mime_filename.3 curl_mime_free.3 '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_mime_headers.3 curl_mime_init.3 curl_mime_name.3 curl_mime_subparts.3 curl_mime_type.3 curl_mprintf.3 curl_multi_add_handle.3 curl_multi_assign.3 curl_multi_cleanup.3 curl_multi_fdset.3 curl_multi_get_handles.3 curl_multi_get_offt.3 curl_multi_info_read.3 curl_multi_init.3 curl_multi_perform.3 curl_multi_poll.3 curl_multi_remove_handle.3 curl_multi_setopt.3 curl_multi_socket.3 curl_multi_socket_action.3 curl_multi_socket_all.3 curl_multi_strerror.3 curl_multi_timeout.3 curl_multi_wait.3 curl_multi_waitfds.3 curl_multi_wakeup.3 curl_pushheader_byname.3 curl_pushheader_bynum.3 curl_share_cleanup.3 curl_share_init.3 curl_share_setopt.3 curl_share_strerror.3 curl_slist_append.3 curl_slist_free_all.3 curl_strequal.3 curl_strnequal.3 curl_unescape.3 curl_url.3 curl_url_cleanup.3 curl_url_dup.3 '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_url_get.3 curl_url_set.3 curl_url_strerror.3 curl_version.3 curl_version_info.3 curl_ws_meta.3 curl_ws_recv.3 curl_ws_send.3 curl_ws_start_frame.3 libcurl-easy.3 libcurl-env-dbg.3 libcurl-env.3 libcurl-errors.3 libcurl-multi.3 libcurl-security.3 libcurl-share.3 libcurl-symbols.3 libcurl-thread.3 libcurl-tutorial.3 libcurl-url.3 libcurl-ws.3 libcurl.3 '/home/peter/result/share/man/man3'
make[6]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[4]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[3]: Leaving directory '/home/peter/curl-8.16.0'
make[2]: Leaving directory '/home/peter/curl-8.16.0'
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 72 lines
ASSISTANT

Let me check if the binary is now statically linked:

compile-bench> file /home/peter/result/bin/curl
/home/peter/result/bin/curl: ELF 64-bit LSB pie executable, ARM aarch64, version 1 (SYSV), dynamically linked, interpreter /lib/ld-linux-aarch64.so.1, BuildID[sha1]=f00d6b9c06532a2a356d26bd0f8fab999ae40f1b, for GNU/Linux 3.7.0, not stripped
ASSISTANT

It's still dynamically linked. The issue is that the linker needs more specific flags. Let me check what libraries it's trying to link dynamically:

compile-bench> aarch64-linux-gnu-readelf -d /home/peter/result/bin/curl
Dynamic section at offset 0x699bb0 contains 28 entries:
  Tag        Type                         Name/Value
 0x0000000000000001 (NEEDED)             Shared library: [libc.so.6]
 0x0000000000000001 (NEEDED)             Shared library: [ld-linux-aarch64.so.1]
 0x000000000000000c (INIT)               0x86988
 0x000000000000000d (FINI)               0x44d070
 0x0000000000000019 (INIT_ARRAY)         0x647db0
 0x000000000000001b (INIT_ARRAYSZ)       24 (bytes)
 0x000000000000001a (FINI_ARRAY)         0x647dc8
 0x000000000000001c (FINI_ARRAYSZ)       8 (bytes)
 0x000000006ffffef5 (GNU_HASH)           0x298
 0x0000000000000005 (STRTAB)             0x1368
 0x0000000000000006 (SYMTAB)             0x2b8
 0x000000000000000a (STRSZ)              1614 (bytes)
 0x000000000000000b (SYMENT)             24 (bytes)
 0x0000000000000015 (DEBUG)              0x0
 0x0000000000000003 (PLTGOT)             0x6a9db0
 0x0000000000000002 (PLTRELSZ)           4008 (bytes)
 0x0000000000000014 (PLTREL)             RELA
 0x0000000000000017 (JMPREL)             0x859e0
 0x0000000000000007 (RELA)               0x1b90
 0x0000000000000008 (RELASZ)             540240 (bytes)
 0x0000000000000009 (RELAENT)            24 (bytes)
 0x000000000000001e (FLAGS)              BIND_NOW
 0x000000006ffffffb (FLAGS_1)            Flags: NOW PIE
 0x000000006ffffffe (VERNEED)            0x1b20
 0x000000006fffffff (VERNEEDNUM)         2
 0x000000006ffffff0 (VERSYM)             0x19b6
 0x000000006ffffff9 (RELACOUNT)          22485
 0x0000000000000000 (NULL)               0x0
↓ 31 lines
ASSISTANT

I see - it's still linking against libc dynamically. The issue is that we're using -static in LDFLAGS but the build system might not be picking it up properly for the final curl binary. Let me manually rebuild the curl binary with explicit static linking:

compile-bench> cd /home/peter/curl-8.16.0/src && aarch64-linux-gnu-gcc -static -o curl *.o -L/home/peter/result/lib -L/home/peter/arm64-build/install/lib -lcurl -lssl -lcrypto -lbrotlidec -lbrotlicommon -lzstd -lz -lpthread -ldl 2>&1 | head -50
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: curlinfo.o: in function `main':
curlinfo.c:(.text.startup+0x0): multiple definition of `main'; curl-tool_main.o:tool_main.c:(.text.startup+0x0): first defined here
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: libcurltool_la-config2setopts.o: in function `config2setopts':
config2setopts.c:(.text+0x1d4): multiple definition of `config2setopts'; curl-config2setopts.o:config2setopts.c:(.text+0x1d4): first defined here
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: libcurltool_la-slist_wc.o: in function `slist_wc_append':
slist_wc.c:(.text+0x0): multiple definition of `slist_wc_append'; curl-slist_wc.o:slist_wc.c:(.text+0x0): first defined here
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: libcurltool_la-slist_wc.o: in function `slist_wc_free_all':
slist_wc.c:(.text+0x80): multiple definition of `slist_wc_free_all'; curl-slist_wc.o:slist_wc.c:(.text+0x80): first defined here
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: libcurltool_la-terminal.o: in function `get_terminal_columns':
terminal.c:(.text+0x0): multiple definition of `get_terminal_columns'; curl-terminal.o:terminal.c:(.text+0x0): first defined here
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: libcurltool_la-tool_cb_dbg.o: in function `tool_debug_cb':
tool_cb_dbg.c:(.text+0x0): multiple definition of `tool_debug_cb'; curl-tool_cb_dbg.o:tool_cb_dbg.c:(.text+0x0): first defined here
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: libcurltool_la-tool_cb_hdr.o: in function `tool_write_headers':
tool_cb_hdr.c:(.text+0x0): multiple definition of `tool_write_headers'; curl-tool_cb_hdr.o:tool_cb_hdr.c:(.text+0x0): first defined here
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: libcurltool_la-tool_cb_hdr.o: in function `tool_header_cb':
tool_cb_hdr.c:(.text+0xc0): multiple definition of `tool_header_cb'; curl-tool_cb_hdr.o:tool_cb_hdr.c:(.text+0xc0): first defined here
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: libcurltool_la-tool_cb_prg.o: in function `tool_progress_cb':
tool_cb_prg.c:(.text+0x0): multiple definition of `tool_progress_cb'; curl-tool_cb_prg.o:tool_cb_prg.c:(.text+0x0): first defined here
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: libcurltool_la-tool_cb_prg.o: in function `progressbarinit':
tool_cb_prg.c:(.text+0x4d0): multiple definition of `progressbarinit'; curl-tool_cb_prg.o:tool_cb_prg.c:(.text+0x4d0): first defined here
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: libcurltool_la-tool_cb_rea.o: in function `tool_read_cb':
tool_cb_rea.c:(.text+0x0): multiple definition of `tool_read_cb'; curl-tool_cb_rea.o:tool_cb_rea.c:(.text+0x0): first defined here
/usr/lib/g
[command output truncated]
file':
tool_cb_wrt.c:(.text+0x0): multiple definition of `tool_create_output_file'; curl-tool_cb_wrt.o:tool_cb_wrt.c:(.text+0x0): first defined here
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: libcurltool_la-tool_cb_wrt.o: in function `tool_write_cb':
tool_cb_wrt.c:(.text+0x240): multiple definition of `tool_write_cb'; curl-tool_cb_wrt.o:tool_cb_wrt.c:(.text+0x240): first defined here
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: libcurltool_la-tool_cfgable.o: in function `config_alloc':
tool_cfgable.c:(.text+0x4b4): multiple definition of `config_alloc'; curl-tool_cfgable.o:tool_cfgable.c:(.text+0x4b4): first defined here
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: libcurltool_la-tool_cfgable.o: in function `config_free':
tool_cfgable.c:(.text+0x540): multiple definition of `config_free'; curl-tool_cfgable.o:tool_cfgable.c:(.text+0x540): first defined here
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: libcurltool_la-tool_cfgable.o: in function `globalconf_init':
tool_cfgable.c:(.text+0x584): multiple definition of `globalconf_init'; curl-tool_cfgable.o:tool_cfgable.c:(.text+0x584): first defined here
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: libcurltool_la-tool_cfgable.o: in function `globalconf_free':
tool_cfgable.c:(.text+0x660): multiple definition of `globalconf_free'; curl-tool_cfgable.o:tool_cfgable.c:(.text+0x660): first defined here
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: libcurltool_la-tool_cfgable.o:(.bss+0x0): multiple definition of `global'; curl-tool_cfgable.o:(.bss+0x0): first defined here
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: libcurltool_la-tool_dirhie.o: in function `create_dir_hierarchy':
tool_dirhie.c:(.text+0x0): multiple definition of `create_dir_hierarchy'; curl-tool_dirhie.o:tool_dirhie.c:(.text+0x0): first defined here
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: libcurltool_la-tool_easysrc.o: in function `easysrc_add':
tool_easysrc.c:(.text+0x60): multiple definition of `easysrc_add'; curl-tool_easysrc.o:tool_easysrc.c:(.text+0x60): first defined here
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: libcurltool_la-tool_easysrc.o: in function `easysrc_addf':
tool_easysrc.c:(.text+0xb0): multiple definition of `easysrc_addf'; curl-tool_easysrc.o:tool_easysrc.c:(.text+0xb0): first defined here
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: libcurltool_la-tool_easysrc.o: in function `easysrc_init':
tool_easysrc.c:(.text+0x1a4): multiple definition of `easysrc_init'; curl-tool_easysrc.o:tool_easysrc.c:(.text+0x1a4): first defined here
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: libcurltool_la-tool_easysrc.o: in function `easysrc_perform':
↓ 47 lines
ASSISTANT

Let me use the correct object files:

compile-bench> cd /home/peter/curl-8.16.0/src && aarch64-linux-gnu-gcc -static -o curl-static curl-*.o -L/home/peter/result/lib -L/home/peter/arm64-build/install/lib -lcurl -lssl -lcrypto -lbrotlidec -lbrotlicommon -lzstd -lz -lpthread -ldl
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: curl-tool_findfile.o: in function `findfile':
tool_findfile.c:(.text+0x214): warning: Using 'getpwuid' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: /home/peter/result/lib/libcurl.a(libcurl_la-netrc.o): in function `Curl_parsenetrc':
netrc.c:(.text+0x910): warning: Using 'getpwuid_r' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: /home/peter/result/lib/libcurl.a(libcurl_la-curl_addrinfo.o): in function `Curl_getaddrinfo_ex':
curl_addrinfo.c:(.text+0x74): warning: Using 'getaddrinfo' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: /home/peter/arm64-build/install/lib/libcrypto.a(libcrypto-lib-bio_sock.o): in function `BIO_gethostbyname':
bio_sock.c:(.text+0x300): warning: Using 'gethostbyname' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
↓ 9 lines
ASSISTANT

Great! It compiled with warnings but those are just informational. Let's verify it's static:

compile-bench> file /home/peter/curl-8.16.0/src/curl-static
/home/peter/curl-8.16.0/src/curl-static: ELF 64-bit LSB executable, ARM aarch64, version 1 (GNU/Linux), statically linked, BuildID[sha1]=dca25b12a4eee74b44a9ce621b598673f347701a, for GNU/Linux 3.7.0, not stripped
ASSISTANT

Perfect! Now it's statically linked! Let's copy it to the result directory and update the symlink:

compile-bench> cp /home/peter/curl-8.16.0/src/curl-static /home/peter/result/bin/curl && ls -lh /home/peter/result/bin/curl
-rwxr-xr-x 1 peter peter 7.9M Sep 29 18:13 /home/peter/result/bin/curl
ASSISTANT

Excellent! Now let's verify it's properly statically linked for ARM64:

compile-bench> file /home/peter/result/bin/curl && aarch64-linux-gnu-readelf -d /home/peter/result/bin/curl | head -5
/home/peter/result/bin/curl: ELF 64-bit LSB executable, ARM aarch64, version 1 (GNU/Linux), statically linked, BuildID[sha1]=dca25b12a4eee74b44a9ce621b598673f347701a, for GNU/Linux 3.7.0, not stripped

There is no dynamic section in this file.
↓ 4 lines
ASSISTANT

Perfect! The binary is statically linked for ARM64. Now let's verify the symlink exists:

compile-bench> ls -la /home/peter/result/curl
lrwxrwxrwx 1 peter peter 27 Sep 29 18:12 /home/peter/result/curl -> /home/peter/result/bin/curl
ASSISTANT

Great! Now let's check that curl has the required features (SSL/TLS, brotli, zlib, zstd). First, let me copy the CA certificates so curl can verify SSL connections:

compile-bench> sudo apt-get install -y ca-certificates
Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 3%

Reading package lists... 3%

Reading package lists... 4%

Reading package lists... 4%

Reading package lists... 41%

Reading package lists... 41%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 51%

Reading package lists... 51%

Reading package lists... 67%

Reading package lists... 67%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 80%

Reading package lists... 80%

Reading package lists... 96%

Reading package lists... 96%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... Done


Building dependency tree... 0%

Building dependency tree... 0%

Building dependency tree... 50%

Building dependency tree... 50%

Building dependency tree... 95%

Building dependency tree... Done


Reading state information... 0% 

Reading state information... 0%

Reading state information... Done

ca-certificates is already the newest version (20240203~22.04.1).
0 upgraded, 0 newly installed, 0 to remove and 10 not upgraded.
↓ 6 lines
ASSISTANT

Now let's test curl with qemu-aarch64-static. First, let me check the version and features:

compile-bench> qemu-aarch64-static /home/peter/result/bin/curl --version
curl 8.16.0 (aarch64-unknown-linux-gnu) libcurl/8.16.0 OpenSSL/3.3.2 zlib/1.3.1 brotli/1.1.0 zstd/1.5.6
Release-Date: 2025-09-10
Protocols: file ftp ftps http https ipfs ipns mqtt smb smbs ws wss
Features: alt-svc brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM SSL threadsafe TLS-SRP UnixSockets zstd
↓ 5 lines
ASSISTANT

Excellent! The binary has all the required features:
- SSL (OpenSSL/3.3.2) with TLS support
- brotli/1.1.0
- zlib/1.3.1
- zstd/1.5.6

Now let's do the critical test - making an HTTPS request to google.com with the EXACT command specified:

compile-bench> qemu-aarch64-static /home/peter/result/bin/curl https://google.com
curl: (60) SSL certificate problem: unable to get local issuer certificate
More details here: https://curl.se/docs/sslcerts.html

curl failed to verify the legitimacy of the server and therefore could not
establish a secure connection to it. To learn more about this situation and
how to fix it, please visit the webpage mentioned above.
↓ 7 lines
ASSISTANT

The curl binary is working but it needs CA certificates. Let me set the CA bundle path:

compile-bench> qemu-aarch64-static /home/peter/result/bin/curl --cacert /etc/ssl/certs/ca-certificates.crt https://google.com
<HTML><HEAD><meta http-equiv="content-type" content="text/html;charset=utf-8">
<TITLE>301 Moved</TITLE></HEAD><BODY>
<H1>301 Moved</H1>
The document has moved
<A HREF="https://www.google.com/">here</A>.

</BODY></HTML>
↓ 7 lines
ASSISTANT

Perfect! It works with the CA cert specified. However, the requirement is to make the command curl https://google.com work without additional flags. Let me rebuild curl with the CA bundle path embedded:

compile-bench> cd /home/peter/curl-8.16.0 && make clean
Making clean in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
test -z "unitprotos.h" || rm -f unitprotos.h
test -z "libcurl.la" || rm -f libcurl.la
rm -f ./so_locations
rm -rf .libs _libs
rm -rf curlx/.libs curlx/_libs
rm -rf vauth/.libs vauth/_libs
rm -rf vquic/.libs vquic/_libs
rm -rf vssh/.libs vssh/_libs
rm -rf vtls/.libs vtls/_libs
test -z "libcurlu.la" || rm -f libcurlu.la
rm -f ./so_locations
rm -f *.o
rm -f curlx/*.o
rm -f curlx/*.lo
rm -f vauth/*.o
rm -f vauth/*.lo
rm -f vquic/*.o
rm -f vquic/*.lo
rm -f vssh/*.o
rm -f vssh/*.lo
rm -f vtls/*.o
rm -f vtls/*.lo
rm -f *.lo
make[1]: Leaving directory '/home/peter/curl-8.16.0/lib'
Making clean in docs
make[1]: Entering directory '/home/peter/curl-8.16.0/docs'
Making clean in .
make[2]: Entering directory '/home/peter/curl-8.16.0/docs'
test -z "mk-ca-bundle.1 curl-config.1 wcurl.1 runtests.1 testcurl.1" || rm -f mk-ca-bundle.1 curl-config.1 wcurl.1 runtests.1 testcurl.1
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs'
Making clean in cmdline-opts
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
test -z "curl.1 curl.txt" || rm -f curl.1 curl.txt
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
Making clean in libcurl
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
Making clean in opts
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
test -z "CURLINFO_ACTIVESOCKET.3 CURLINFO_APPCONNECT_TIME.3 CURLINFO_APPCONNECT_TIME_T.3 CURLINFO_CAINFO.3 CURLINFO_CAPATH.3 CURLINFO_CERTINFO.3 CURLINFO_CONDITION_UNMET.3 CURLINFO_CONNECT_TIME.3 CURLINFO_CONN_ID.3 CURLINFO_CONNECT_TIME_T.3 CURLINFO_CONTENT_LENGTH_DOWNLOAD.3 CURLINFO_CONTENT_LENGTH_DOWNLOAD_T.3 CURLINFO_CONTENT_LENGTH_UPLOAD.3 CURLINFO_CONTENT_LENGTH_UPLOAD_T.3 CURLINFO_CONTENT_TYPE.3 CURLINFO_COOKIELIST.3 CURLINFO_EARLYDATA_SENT_T.3 CURLINFO_EFFECTIVE_METHOD.3 CURLINFO_EFFECTIVE_URL.3 CURLINFO_FILETIME.3 CURLINFO_FILETIME_T.3 CURLINFO_FTP_ENTRY_PATH.3 CURLINFO_HEADER_SIZE.3 CURLINFO_HTTP_CONNECTCODE.3 CURLINFO_HTTP_VERSION.3 CURLINFO_HTTPAUTH_AVAIL.3 CURLINFO_HTTPAUTH_USED.3 CURLINFO_LASTSOCKET.3 CURLINFO_LOCAL_IP.3 CURLINFO_LOCAL_PORT.3 CURLINFO_NAMELOOKUP_TIME.3 CURLINFO_NAMELOOKUP_TIME_T.3 CURLINFO_NUM_CONNECTS.3 CURLINFO_OS_ERRNO.3 CURLINFO_PRETRANSFER_TIME.3 CURLINFO_PRETRANSFER_TIME_T.3 CURLINFO_POSTTRANSFER_TIME_T.3 CURLINFO_PRIMARY_IP.3 CURLINFO_PRIMARY_PORT.3 CURLINFO_PRIVATE.3 CURLINFO_PROTOCOL.3 CURLINFO_PROXY_ERROR.3 CURLINFO_PROXY_SSL_VERIFYRESULT.3 CURLINFO_PROXYAUTH_AVAIL.3 CURLINFO_PROXYAUTH_USED.3 CURLINFO_QUEUE_TIME_T.3 CURLINFO_REDIRECT_COUNT.3 CURLINFO_REDIRECT_TIME.3 CURLINFO_REDIRECT_TIME_T.3 CURLINFO_REDIRECT_URL.3 CURLINFO_REFERER.3 CURLINFO_REQUEST_SIZE.3 CURLINFO_RESPONSE_CODE.3 CURLINFO_RETRY_AFTER.3 CURLINFO_RTSP_CLIENT_CSEQ.3 CURLINFO_RTSP_CSEQ_RECV.3 CURLINFO_RTSP_SERVER_CSEQ.3 CURLINFO_RTSP_SESSION_ID.3 CUR
[command output truncated]
rt test-ca.crt test-ca.key test-localhost.crl test-localhost.crt test-localhost.key test-localhost.pem test-localhost.pub.der test-localhost.pub.pem test-localhost.nn.crl test-localhost.nn.crt test-localhost.nn.key test-localhost.nn.pem test-localhost.nn.pub.der test-localhost.nn.pub.pem test-localhost0h.crl test-localhost0h.crt test-localhost0h.key test-localhost0h.pem test-localhost0h.pub.der test-localhost0h.pub.pem test-localhost-san-first.crl test-localhost-san-first.crt test-localhost-san-first.key test-localhost-san-first.pem test-localhost-san-first.pub.der test-localhost-san-first.pub.pem test-localhost-san-last.crl test-localhost-san-last.crt test-localhost-san-last.key test-localhost-san-last.pem test-localhost-san-last.pub.der test-localhost-san-last.pub.pem test-client-cert.crl test-client-cert.crt test-client-cert.key test-client-cert.pem test-client-cert.pub.der test-client-cert.pub.pem \
  test-*.csr \
  test-*.der \
  test-*.keyenc \
  test-ca.cnt* \
  test-ca.db* \
  test-ca.raw* \
  test-ca.srl
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/certs'
Making clean in data
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/data'
rm -rf .libs _libs
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/data'
Making clean in server
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/server'
test -z "servers.c" || rm -f servers.c
rm -rf .libs _libs
rm -f servers
 rm -f servers
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/server'
Making clean in libtest
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/libtest'
test -z "libtests.c lib1521.c" || rm -f libtests.c lib1521.c
rm -rf .libs _libs
rm -f libtests
 rm -f libtests
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/libtest'
Making clean in http
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/http'
rm -rf .libs _libs
rm -rf *.pyc __pycache__
rm -rf gen
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/http'
Making clean in unit
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/unit'
test -z "units.c" || rm -f units.c
rm -rf .libs _libs
rm -f units
 rm -f units
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/unit'
Making clean in tunit
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/tunit'
test -z "tunits.c" || rm -f tunits.c
rm -rf .libs _libs
rm -f tunits
 rm -f tunits
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/tunit'
make[3]: Entering directory '/home/peter/curl-8.16.0/tests'
test -z ".http.pid .https.pid .ftp.pid .ftps.pid" || rm -f .http.pid .https.pid .ftp.pid .ftps.pid
rm -rf .libs _libs
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests'
make[2]: Leaving directory '/home/peter/curl-8.16.0/tests'
rm -f *.lo
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 113 lines
ASSISTANT
compile-bench> cd /home/peter/curl-8.16.0 && export PKG_CONFIG_PATH=/home/peter/arm64-build/install/lib/pkgconfig:/home/peter/arm64-build/install/share/pkgconfig && export PKG_CONFIG_LIBDIR=/home/peter/arm64-build/install/lib/pkgconfig && ./configure --host=aarch64-linux-gnu --prefix=/home/peter/result --with-openssl=/home/peter/arm64-build/install --with-zlib=/home/peter/arm64-build/install --with-brotli=/home/peter/arm64-build/install --with-zstd=/home/peter/arm64-build/install --with-ca-bundle=/etc/ssl/certs/ca-certificates.crt --enable-static --disable-shared --disable-ldap --disable-ldaps --disable-rtsp --disable-dict --disable-telnet --disable-tftp --disable-pop3 --disable-imap --disable-smtp --disable-gopher --disable-manual --without-libpsl --without-nghttp2 --disable-threaded-resolver LDFLAGS="-static -L/home/peter/arm64-build/install/lib" LIBS="-lssl -lcrypto -lbrotlidec -lbrotlicommon -lzstd -lz -lpthread -ldl" CPPFLAGS="-I/home/peter/arm64-build/install/include" CC=aarch64-linux-gnu-gcc AR=aarch64-linux-gnu-ar RANLIB=aarch64-linux-gnu-ranlib
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for a BSD-compatible install... /usr/bin/install -c
checking for aarch64-linux-gnu-gcc... aarch64-linux-gnu-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether aarch64-linux-gnu-gcc accepts -g... yes
checking for aarch64-linux-gnu-gcc option to enable C11 features... none needed
checking whether aarch64-linux-gnu-gcc understands -c and -o together... yes
checking how to run the C preprocessor... aarch64-linux-gnu-gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for aarch64-linux-gnu-strip... aarch64-linux-gnu-strip
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of aarch64-linux-gnu-gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... aarch64-unknown-linux-gnu
checking for grep that handles long lines an
[command output truncated]
gnu
  Install prefix:   /home/peter/result
  Compiler:         aarch64-linux-gnu-gcc
   CFLAGS:          -Werror-implicit-function-declaration -O2 -Wno-system-headers
   CFLAGS extras:   
   CPPFLAGS:        -isystem /home/peter/arm64-build/install/include -D_GNU_SOURCE -isystem /home/peter/arm64-build/install/include -isystem /home/peter/arm64-build/install/include -isystem /home/peter/arm64-build/install/include -isystem /home/peter/arm64-build/install/include
   LDFLAGS:         -static -L/home/peter/arm64-build/install/lib -L/home/peter/arm64-build/install/lib -L/home/peter/arm64-build/install/lib -L/home/peter/arm64-build/install/lib -L/home/peter/arm64-build/install/lib
     curl-config:   -L/home/peter/arm64-build/install/lib -L/home/peter/arm64-build/install/lib -L/home/peter/arm64-build/install/lib -L/home/peter/arm64-build/install/lib
   LIBS:            -lssl -lcrypto -lssl -lcrypto -lzstd -lzstd -lbrotlidec -lbrotlidec -lbrotlicommon -lz -lssl -lcrypto -lbrotlidec -lbrotlicommon -lzstd -lz -lpthread -ldl

  curl version:     8.16.0
  SSL:              enabled (OpenSSL v3+)
  SSH:              no      (--with-{libssh,libssh2})
  zlib:             enabled
  brotli:           enabled (libbrotlidec)
  zstd:             enabled (libzstd)
  GSS-API:          no      (--with-gssapi)
  GSASL:            no      (libgsasl not found)
  TLS-SRP:          enabled
  resolver:         blocking (--enable-ares / --enable-threaded-resolver)
  IPv6:             enabled
  Unix sockets:     enabled
  IDN:              no      (--with-{libidn2,winidn})
  Build docs:       enabled (--disable-docs)
  Build libcurl:    Shared=no, Static=yes
  Built-in manual:  no      (--enable-manual)
  --libcurl option: enabled (--disable-libcurl-option)
  Verbose errors:   enabled (--disable-verbose)
  Code coverage:    disabled
  SSPI:             no      (--enable-sspi)
  ca cert bundle:   /etc/ssl/certs/ca-certificates.crt
  ca cert path:     no
  ca cert embed:    no
  ca fallback:      no
  LDAP:             no      (--enable-ldap / --with-ldap-lib / --with-lber-lib)
  LDAPS:            no      (--enable-ldaps)
  IPFS/IPNS:        enabled
  RTSP:             no      (--enable-rtsp)
  RTMP:             no      (--with-librtmp)
  PSL:              no      (--with-libpsl)
  Alt-svc:          enabled (--disable-alt-svc)
  Headers API:      enabled (--disable-headers-api)
  HSTS:             enabled (--disable-hsts)
  HTTP1:            enabled (internal)
  HTTP2:            no      (--with-nghttp2)
  HTTP3:            no      (--with-ngtcp2 --with-nghttp3, --with-quiche, --with-openssl-quic)
  ECH:              no      (--enable-ech)
  HTTPS RR:         no      (--enable-httpsrr)
  SSLS-EXPORT:      no      (--enable-ssls-export)
  Protocols:        file ftp ftps http https ipfs ipns mqtt smb smbs ws wss
  Features:         alt-svc brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM SSL threadsafe TLS-SRP UnixSockets zstd
↓ 117 lines
ASSISTANT

Perfect! Now it's configured with the CA bundle. Let's build it:

compile-bench> cd /home/peter/curl-8.16.0 && make -j$(nproc) 2>&1 | tail -20
  CC       libcurltool_la-tool_urlglob.lo
  CC       libcurltool_la-tool_util.lo
  CC       libcurltool_la-tool_vms.lo
  CC       libcurltool_la-tool_writeout.lo
  CC       libcurltool_la-tool_writeout_json.lo
  CC       libcurltool_la-tool_xattr.lo
  CC       libcurltool_la-var.lo
  CC       curl-tool_hugehelp.o
  CC       curl-tool_ca_embed.o
  CCLD     curlinfo
  CCLD     curl
  CCLD     libcurltool.la
make[1]: Leaving directory '/home/peter/curl-8.16.0/src'
Making all in scripts
make[1]: Entering directory '/home/peter/curl-8.16.0/scripts'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/home/peter/curl-8.16.0/scripts'
make[1]: Entering directory '/home/peter/curl-8.16.0'
make[1]: Nothing to be done for 'all-am'.
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 21 lines
ASSISTANT

Now let's create the static binary again:

compile-bench> cd /home/peter/curl-8.16.0/src && aarch64-linux-gnu-gcc -static -o curl-static curl-*.o -L/home/peter/result/lib -L/home/peter/arm64-build/install/lib -lcurl -lssl -lcrypto -lbrotlidec -lbrotlicommon -lzstd -lz -lpthread -ldl
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: curl-tool_findfile.o: in function `findfile':
tool_findfile.c:(.text+0x214): warning: Using 'getpwuid' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: /home/peter/result/lib/libcurl.a(libcurl_la-netrc.o): in function `Curl_parsenetrc':
netrc.c:(.text+0x910): warning: Using 'getpwuid_r' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: /home/peter/result/lib/libcurl.a(libcurl_la-curl_addrinfo.o): in function `Curl_getaddrinfo_ex':
curl_addrinfo.c:(.text+0x74): warning: Using 'getaddrinfo' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: /home/peter/arm64-build/install/lib/libcrypto.a(libcrypto-lib-bio_sock.o): in function `BIO_gethostbyname':
bio_sock.c:(.text+0x300): warning: Using 'gethostbyname' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
↓ 9 lines
ASSISTANT

Good! Now let's copy it to the result directory:

compile-bench> cp /home/peter/curl-8.16.0/src/curl-static /home/peter/result/bin/curl && file /home/peter/result/bin/curl
/home/peter/result/bin/curl: ELF 64-bit LSB executable, ARM aarch64, version 1 (GNU/Linux), statically linked, BuildID[sha1]=dca25b12a4eee74b44a9ce621b598673f347701a, for GNU/Linux 3.7.0, not stripped
ASSISTANT

Perfect! Now let's test with the EXACT command as specified:

compile-bench> qemu-aarch64-static /home/peter/result/bin/curl https://google.com
curl: (60) SSL certificate problem: unable to get local issuer certificate
More details here: https://curl.se/docs/sslcerts.html

curl failed to verify the legitimacy of the server and therefore could not
establish a secure connection to it. To learn more about this situation and
how to fix it, please visit the webpage mentioned above.
↓ 7 lines
ASSISTANT

The issue is that when running in qemu, the path /etc/ssl/certs/ca-certificates.crt doesn't exist in the ARM64 environment. Let me use the symlink from /home/peter/result/curl to test:

compile-bench> qemu-aarch64-static /home/peter/result/curl https://google.com 2>&1 | head -5
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
curl: (60) SSL certificate problem: unable to get local issuer certificate
More details here: https://curl.se/docs/sslcerts.html
↓ 6 lines
ASSISTANT

The CA bundle path is compiled in, but when running with qemu-aarch64-static, it's trying to access the host's /etc/ssl/certs/ca-certificates.crt. Let me check if we can use CURL_CA_BUNDLE environment variable or we need to embed the certificates. Let me try using the SSL_CERT_FILE environment variable:

compile-bench> SSL_CERT_FILE=/etc/ssl/certs/ca-certificates.crt qemu-aarch64-static /home/peter/result/curl https://google.com 2>&1 | head -10
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100   220  100   220    0     0   1087      0 --:--:-- --:--:-- --:--:--  1157
<HTML><HEAD><meta http-equiv="content-type" content="text/html;charset=utf-8">
<TITLE>301 Moved</TITLE></HEAD><BODY>
<H1>301 Moved</H1>
The document has moved
<A HREF="https://www.google.com/">here</A>.

</BODY></HTML>
↓ 10 lines
ASSISTANT

Good! It works with SSL_CERT_FILE. However, the requirement is that the EXACT command curl https://google.com should work. The issue is that qemu doesn't automatically see the host's filesystem. Let me check if qemu has access to the file:

compile-bench> qemu-aarch64-static /home/peter/result/bin/curl --version | grep -i ca
[empty output]
ASSISTANT

Let me check if qemu can access the file:

compile-bench> qemu-aarch64-static -L /usr/aarch64-linux-gnu /home/peter/result/bin/curl https://google.com 2>&1 | head -10
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
curl: (60) SSL certificate problem: unable to get local issuer certificate
More details here: https://curl.se/docs/sslcerts.html

curl failed to verify the legitimacy of the server and therefore could not
establish a secure connection to it. To learn more about this situation and
how to fix it, please visit the webpage mentioned above.
↓ 10 lines
ASSISTANT

Since the binary is statically linked, qemu should have access to the host filesystem including /etc/ssl/certs/ca-certificates.crt. Let me check if the file exists and is readable:

compile-bench> ls -la /etc/ssl/certs/ca-certificates.crt && head -3 /etc/ssl/certs/ca-certificates.crt
-rw-r--r-- 1 root root 219342 Sep 15 11:21 /etc/ssl/certs/ca-certificates.crt
-----BEGIN CERTIFICATE-----
MIIH0zCCBbugAwIBAgIIXsO3pkN/pOAwDQYJKoZIhvcNAQEFBQAwQjESMBAGA1UE
AwwJQUNDVlJBSVoxMRAwDgYDVQQLDAdQS0lBQ0NWMQ0wCwYDVQQKDARBQ0NWMQsw
↓ 5 lines
ASSISTANT

The file exists. The issue might be that curl is looking for it at runtime but qemu might be interpreting the path differently, or there's an issue with file access. Let me check what curl is actually configured with:

compile-bench> aarch64-linux-gnu-strings /home/peter/result/bin/curl | grep -i "ca-certificates.crt"
[empty output]
ASSISTANT
compile-bench> aarch64-linux-gnu-strings /home/peter/result/bin/curl | grep -i "/etc/ssl"
[empty output]
ASSISTANT

Let me check if the CA bundle path is in the libcurl:

compile-bench> aarch64-linux-gnu-strings /home/peter/result/lib/libcurl.a | grep -i "ca-certificates" | head -3
[empty output]
ASSISTANT
compile-bench> aarch64-linux-gnu-strings /home/peter/result/lib/libcurl.a | grep "/etc/ssl" | head -3
[empty output]
ASSISTANT

It seems the CA bundle path didn't get compiled in. Let me check the curl binary more carefully:

compile-bench> aarch64-linux-gnu-strings /home/peter/result/bin/curl | grep "ssl/certs"
/home/peter/arm64-build/install/ssl/certs
ASSISTANT

Ah! The curl binary is using the OpenSSL installation path for certs. Let me copy the CA certificates there:

compile-bench> mkdir -p /home/peter/arm64-build/install/ssl/certs && cp /etc/ssl/certs/ca-certificates.crt /home/peter/arm64-build/install/ssl/certs/
[empty output]
ASSISTANT

Now let's test again:

compile-bench> qemu-aarch64-static /home/peter/result/bin/curl https://google.com 2>&1 | head -10
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
curl: (60) SSL certificate problem: unable to get local issuer certificate
More details here: https://curl.se/docs/sslcerts.html

curl failed to verify the legitimacy of the server and therefore could not
establish a secure connection to it. To learn more about this situation and
how to fix it, please visit the webpage mentioned above.
↓ 10 lines
ASSISTANT

The issue is that OpenSSL needs to know where to look for certs. Let me check what cert file OpenSSL is looking for:

compile-bench> aarch64-linux-gnu-strings /home/peter/result/bin/curl | grep "cert" | grep -v "Certificate" | head -10
Invalid character is found in given range. A specified range MUST have only digits in 'start'-'stop'. The server's response to this request is uncertain.
cacert
cert-status
cert-type
doh-cert-status
proxy-cacert
proxy-cert
proxy-cert-type
proxy-ssl-auto-client-cert
ssl-auto-client-cert
↓ 11 lines
ASSISTANT

Let me check what OpenSSL cert files/paths are compiled in:

compile-bench> aarch64-linux-gnu-strings /home/peter/arm64-build/install/lib/libssl.a | grep "cert" | grep "/" | head -5
libssl-lib-ssl_cert.o/
libssl-lib-ssl_cert_comp.o/
ssl/ssl_cert.c
ssl/tls alert bad certificate
ssl/tls alert certificate expired
↓ 6 lines
ASSISTANT

Let me check the OpenSSL configuration to see where it looks for certs:

compile-bench> cat /home/peter/arm64-build/install/ssl/openssl.cnf | grep -A2 "\[default"
[default_sect]
# activate = 1
↓ 3 lines
ASSISTANT

Let me try a different approach - let's create a hash link for the CA cert in the certs directory:

compile-bench> cd /home/peter/arm64-build/install/ssl/certs && for cert in /etc/ssl/certs/*.pem; do cp "$cert" .; done && ls | head -10
ACCVRAIZ1.pem
AC_RAIZ_FNMT-RCM.pem
AC_RAIZ_FNMT-RCM_SERVIDORES_SEGUROS.pem
ANF_Secure_Server_Root_CA.pem
Actalis_Authentication_Root_CA.pem
AffirmTrust_Commercial.pem
AffirmTrust_Networking.pem
AffirmTrust_Premium.pem
AffirmTrust_Premium_ECC.pem
Amazon_Root_CA_1.pem
↓ 11 lines
ASSISTANT

Now let's test again:

compile-bench> qemu-aarch64-static /home/peter/result/bin/curl https://google.com
curl: (60) SSL certificate problem: unable to get local issuer certificate
More details here: https://curl.se/docs/sslcerts.html

curl failed to verify the legitimacy of the server and therefore could not
establish a secure connection to it. To learn more about this situation and
how to fix it, please visit the webpage mentioned above.
↓ 7 lines
ASSISTANT

The issue is that OpenSSL expects hashed symlinks. Let me use c_rehash:

compile-bench> cd /home/peter/arm64-build/install/ssl/certs && /home/peter/arm64-build/install/bin/c_rehash .
Doing .
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2
[command output truncated]
ssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
/home/peter/arm64-build/install/bin/openssl: 2: Syntax error: word unexpected (expecting ")")
↓ 67 lines
ASSISTANT

The arm64 openssl binary can't run on x86. Let me use the host's c_rehash:

compile-bench> cd /home/peter/arm64-build/install/ssl/certs && c_rehash . 2>&1 | head -5
Doing .
WARNING: Skipping duplicate certificate ca-certificates.crt
WARNING: Skipping duplicate certificate ca-certificates.crt
↓ 4 lines
ASSISTANT

Good! Now let's test:

compile-bench> qemu-aarch64-static /home/peter/result/bin/curl https://google.com
curl: (60) SSL certificate problem: unable to get local issuer certificate
More details here: https://curl.se/docs/sslcerts.html

curl failed to verify the legitimacy of the server and therefore could not
establish a secure connection to it. To learn more about this situation and
how to fix it, please visit the webpage mentioned above.
↓ 7 lines
ASSISTANT

Let me check where curl is configured to look for certs by examining the config:

compile-bench> grep -r "ca cert" /home/peter/curl-8.16.0/config.log | grep -i bundle | head -3
  ca cert bundle:   /etc/ssl/certs/ca-certificates.crt
ASSISTANT

The issue is curl was configured with --with-ca-bundle=/etc/ssl/certs/ca-certificates.crt but the rebuild didn't pick it up properly. Let me rebuild the libcurl library with the proper CA path configuration and then rebuild curl statically. Actually, let me try using the environment variable approach - curl should respect CURL_CA_BUNDLE:

compile-bench> CURL_CA_BUNDLE=/etc/ssl/certs/ca-certificates.crt qemu-aarch64-static /home/peter/result/bin/curl https://google.com
<HTML><HEAD><meta http-equiv="content-type" content="text/html;charset=utf-8">
<TITLE>301 Moved</TITLE></HEAD><BODY>
<H1>301 Moved</H1>
The document has moved
<A HREF="https://www.google.com/">here</A>.

</BODY></HTML>
↓ 7 lines
ASSISTANT

That works! But we need it to work without environment variables. The issue is that the CA bundle path needs to be properly compiled into curl. Let me check if the library has the path:

compile-bench> aarch64-linux-gnu-objdump -s -j .rodata /home/peter/result/lib/libcurl.a 2>/dev/null | grep -A2 "/etc"
[empty output]
ASSISTANT

The CA path is not in the library. Let me check the actual curl source to see how CA bundle is handled. Actually, let me try using --with-ca-path instead which points to a directory:

compile-bench> cd /home/peter/curl-8.16.0 && make clean >/dev/null 2>&1 && export PKG_CONFIG_PATH=/home/peter/arm64-build/install/lib/pkgconfig:/home/peter/arm64-build/install/share/pkgconfig && export PKG_CONFIG_LIBDIR=/home/peter/arm64-build/install/lib/pkgconfig && ./configure --host=aarch64-linux-gnu --prefix=/home/peter/result --with-openssl=/home/peter/arm64-build/install --with-zlib=/home/peter/arm64-build/install --with-brotli=/home/peter/arm64-build/install --with-zstd=/home/peter/arm64-build/install --with-ca-path=/home/peter/arm64-build/install/ssl/certs --enable-static --disable-shared --disable-ldap --disable-ldaps --disable-rtsp --disable-dict --disable-telnet --disable-tftp --disable-pop3 --disable-imap --disable-smtp --disable-gopher --disable-manual --without-libpsl --without-nghttp2 --disable-threaded-resolver LDFLAGS="-static -L/home/peter/arm64-build/install/lib" LIBS="-lssl -lcrypto -lbrotlidec -lbrotlicommon -lzstd -lz -lpthread -ldl" CPPFLAGS="-I/home/peter/arm64-build/install/include" CC=aarch64-linux-gnu-gcc AR=aarch64-linux-gnu-ar RANLIB=aarch64-linux-gnu-ranlib 2>&1 | grep "ca cert"
  ca cert bundle:   no
  ca cert path:     /home/peter/arm64-build/install/ssl/certs
  ca cert embed:    no
↓ 4 lines
ASSISTANT

Good! Now it's configured with the ca cert path. Let's build it:

compile-bench> cd /home/peter/curl-8.16.0 && make -j$(nproc) >/dev/null 2>&1 && echo "Build complete"
Build complete
ASSISTANT

Now let's create the static binary:

compile-bench> cd /home/peter/curl-8.16.0/src && aarch64-linux-gnu-gcc -static -o curl-static curl-*.o -L/home/peter/result/lib -L/home/peter/arm64-build/install/lib -lcurl -lssl -lcrypto -lbrotlidec -lbrotlicommon -lzstd -lz -lpthread -ldl 2>&1 | grep -v "warning:"
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: curl-tool_findfile.o: in function `findfile':
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: /home/peter/result/lib/libcurl.a(libcurl_la-netrc.o): in function `Curl_parsenetrc':
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: /home/peter/result/lib/libcurl.a(libcurl_la-curl_addrinfo.o): in function `Curl_getaddrinfo_ex':
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: /home/peter/arm64-build/install/lib/libcrypto.a(libcrypto-lib-bio_sock.o): in function `BIO_gethostbyname':
↓ 5 lines
ASSISTANT
compile-bench> cp /home/peter/curl-8.16.0/src/curl-static /home/peter/result/bin/curl && file /home/peter/result/bin/curl
/home/peter/result/bin/curl: ELF 64-bit LSB executable, ARM aarch64, version 1 (GNU/Linux), statically linked, BuildID[sha1]=dca25b12a4eee74b44a9ce621b598673f347701a, for GNU/Linux 3.7.0, not stripped
ASSISTANT

Now let's test it with the EXACT command:

compile-bench> qemu-aarch64-static /home/peter/result/bin/curl https://google.com
curl: (60) SSL certificate problem: unable to get local issuer certificate
More details here: https://curl.se/docs/sslcerts.html

curl failed to verify the legitimacy of the server and therefore could not
establish a secure connection to it. To learn more about this situation and
how to fix it, please visit the webpage mentioned above.
↓ 7 lines
ASSISTANT

The issue is that when running under qemu-aarch64-static, the path /home/peter/arm64-build/install/ssl/certs is accessible because qemu shares the host filesystem. However, it seems curl is still not finding the certs. Let me verify the path is compiled in:

compile-bench> aarch64-linux-gnu-strings /home/peter/result/bin/curl | grep "arm64-build/install/ssl"
/home/peter/arm64-build/install/ssl/ct_log_list.cnf
OPENSSLDIR: "/home/peter/arm64-build/install/ssl"
/home/peter/arm64-build/install/ssl
/home/peter/arm64-build/install/ssl/private
/home/peter/arm64-build/install/ssl/certs
/home/peter/arm64-build/install/ssl/cert.pem
↓ 7 lines
ASSISTANT

Good! The path is compiled in. The issue might be that curl is looking for a file called "cert.pem" in that directory. Let me create that:

compile-bench> cp /etc/ssl/certs/ca-certificates.crt /home/peter/arm64-build/install/ssl/cert.pem
[empty output]
ASSISTANT

Now let's test again:

compile-bench> qemu-aarch64-static /home/peter/result/bin/curl https://google.com
curl: (60) SSL certificate problem: unable to get local issuer certificate
More details here: https://curl.se/docs/sslcerts.html

curl failed to verify the legitimacy of the server and therefore could not
establish a secure connection to it. To learn more about this situation and
how to fix it, please visit the webpage mentioned above.
↓ 7 lines
ASSISTANT

It's still not working. Let me check if curl is actually using the OpenSSL cert path. Let me try testing with strace to see what files it's trying to open. Actually, let me use the symlink approach instead:

compile-bench> qemu-aarch64-static /home/peter/result/curl https://google.com
curl: (60) SSL certificate problem: unable to get local issuer certificate
More details here: https://curl.se/docs/sslcerts.html

curl failed to verify the legitimacy of the server and therefore could not
establish a secure connection to it. To learn more about this situation and
how to fix it, please visit the webpage mentioned above.
↓ 7 lines
ASSISTANT

Let me check if the hashed symlinks are correctly created:

compile-bench> ls -la /home/peter/arm64-build/install/ssl/certs/ | head -20
total 840
drwxr-xr-x 2 peter peter  20480 Sep 29 18:15 .
drwxr-xr-x 5 peter peter   4096 Sep 29 18:16 ..
lrwxrwxrwx 1 peter peter     23 Sep 29 18:15 002c0b4f.0 -> GlobalSign_Root_R46.pem
lrwxrwxrwx 1 peter peter     49 Sep 29 18:15 01419da9.0 -> Microsoft_ECC_Root_Certificate_Authority_2017.pem
lrwxrwxrwx 1 peter peter     24 Sep 29 18:15 0179095f.0 -> BJCA_Global_Root_CA1.pem
lrwxrwxrwx 1 peter peter     45 Sep 29 18:15 02265526.0 -> Entrust_Root_Certification_Authority_-_G2.pem
lrwxrwxrwx 1 peter peter     41 Sep 29 18:15 04f60c28.0 -> USERTrust_ECC_Certification_Authority.pem
lrwxrwxrwx 1 peter peter     27 Sep 29 18:15 062cdee6.0 -> GlobalSign_Root_CA_-_R3.pem
lrwxrwxrwx 1 peter peter     25 Sep 29 18:15 064e0aa9.0 -> QuoVadis_Root_CA_2_G3.pem
lrwxrwxrwx 1 peter peter     50 Sep 29 18:15 06dc52d5.0 -> SSL.com_EV_Root_Certification_Authority_RSA_R2.pem
lrwxrwxrwx 1 peter peter     31 Sep 29 18:15 073bfcc5.0 -> TrustAsia_Global_Root_CA_G4.pem
lrwxrwxrwx 1 peter peter     34 Sep 29 18:15 08063a00.0 -> Security_Communication_RootCA3.pem
lrwxrwxrwx 1 peter peter     54 Sep 29 18:15 09789157.0 -> Starfield_Services_Root_Certificate_Authority_-_G2.pem
lrwxrwxrwx 1 peter peter     15 Sep 29 18:15 0a775a30.0 -> GTS_Root_R3.pem
lrwxrwxrwx 1 peter peter     16 Sep 29 18:15 0b1b94ef.0 -> CFCA_EV_ROOT.pem
lrwxrwxrwx 1 peter peter     16 Sep 29 18:15 0b9bc432.0 -> ISRG_Root_X2.pem
lrwxrwxrwx 1 peter peter     44 Sep 29 18:15 0bf05006.0 -> SSL.com_Root_Certification_Authority_ECC.pem
lrwxrwxrwx 1 peter peter     31 Sep 29 18:15 0d69c7e1.0 -> GlobalSign_ECC_Root_CA_-_R4.pem
lrwxrwxrwx 1 peter peter     32 Sep 29 18:15 0f5dc4f3.0 -> UCA_Extended_Validation_Root.pem
↓ 21 lines
ASSISTANT

The hashed symlinks are there. Let me check if OpenSSL can see the cert directory by examining what the actual issue is. Let me try with --insecure first to verify connectivity works:

compile-bench> qemu-aarch64-static /home/peter/result/bin/curl --insecure https://google.com 2>&1 | head -10
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100   220  100   220    0     0   1292      0 --:--:-- --:--:-- --:--:--  1392
<HTML><HEAD><meta http-equiv="content-type" content="text/html;charset=utf-8">
<TITLE>301 Moved</TITLE></HEAD><BODY>
<H1>301 Moved</H1>
The document has moved
<A HREF="https://www.google.com/">here</A>.

</BODY></HTML>
↓ 10 lines
ASSISTANT

Good! So the HTTPS connection works, it's just the certificate verification that's failing. The issue is that curl/OpenSSL can't find the certs in the expected location. Let me check if maybe the issue is permission or the files being accessed correctly. Let me add verbose output:

compile-bench> qemu-aarch64-static /home/peter/result/bin/curl -v https://google.com 2>&1 | grep -i "cert\|CAfile\|CApath"
* TLSv1.3 (IN), TLS handshake, Certificate (11):
* SSL certificate problem: unable to get local issuer certificate
curl: (60) SSL certificate problem: unable to get local issuer certificate
More details here: https://curl.se/docs/sslcerts.html
↓ 5 lines
ASSISTANT

Let me see if curl can tell me what paths it's using:

compile-bench> qemu-aarch64-static /home/peter/result/bin/curl -V
curl 8.16.0 (aarch64-unknown-linux-gnu) libcurl/8.16.0 OpenSSL/3.3.2 zlib/1.3.1 brotli/1.1.0 zstd/1.5.6
Release-Date: 2025-09-10
Protocols: file ftp ftps http https ipfs ipns mqtt smb smbs ws wss
Features: alt-svc brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM SSL threadsafe TLS-SRP UnixSockets zstd
↓ 5 lines
ASSISTANT

Let me check with curl --version --verbose to see if it shows CA path info:

compile-bench> qemu-aarch64-static /home/peter/result/bin/curl --help all 2>&1 | grep -i "ca"
     --alt-svc <filename>          Enable alt-svc with this cache file
     --anyauth                     Pick any authentication method
     --basic                       HTTP Basic Authentication
     --ca-native                   Load CA certs from the OS
     --cacert <file>               CA certificate to verify peer against
     --capath <dir>                CA directory to verify peer against
 -E, --cert <certificate[:password]>  Client certificate file and password
     --cert-type <type>            Certificate type (DER/PEM/ENG/PROV/P12)
     --create-dirs                 Create necessary local directory hierarchy
     --crlfile <file>              Certificate Revocation list
     --digest                      HTTP Digest Authentication
     --dump-ca-embed            Write the embedded CA bundle to standard output
     --form-escape                 Escape form fields using backslash
     --ftp-ssl-ccc                 Send CCC after authenticating
     --hsts <filename>             Enable HSTS with this cache file
     --local-port <range>          Use a local port number within RANGE
 -L, --location                    Follow redirects
     --location-trusted          As --location, but send secrets to other hosts
     --negotiate                   Use HTTP Negotiate (SPNEGO) authentication
     --ntlm                        HTTP NTLM authentication
     --ntlm-wb                     HTTP NTLM authentication with winbind
     --out-null                    Discard response data into the void
     --proxy-anyauth               Pick any proxy authentication method
     --proxy-basic                 Use Basic authentication on the proxy
     --proxy-ca-native             Load CA certs from the OS to verify proxy
     --proxy-cacert <file>         CA certificates to verify proxy against
     --proxy-capath <dir>          CA directory to verify proxy against
     --proxy-cert <cert[:passwd]>  Set client certificate for proxy
     --proxy-cert-type <type>      Client certificate type for HTTPS proxy
     --proxy-insecure              Skip HTTPS proxy cert verification
     --proxy-ntlm                  NTLM authentication with the proxy
     --proxy-ssl-auto-client-cert  Auto client certificate for proxy
     --proxy-tlsauthtype <type>    TLS authentication type for HTTPS proxy
 -R, --remote-time                 Set remote file's time on local output
     --sasl-authzid <identity>     Identity for SASL PLAIN authentication
     --sasl-ir                     Initial response in SASL authentication
     --skip-existing               Skip download if local file already exists
     --ssl-auto-client-cert        Use auto client certificate (Schannel)
     --ssl-no-revoke               Disable cert revocation checks (Schannel)
     --tlsauthtype <type>          TLS authentication type
 -T, --upload-file <file>          Transfer local FILE to destination
↓ 42 lines
ASSISTANT

I see that there's a --dump-ca-embed option. Let me check if curl has embedded CAs. But first, let me try running curl with explicit capath:

compile-bench> qemu-aarch64-static /home/peter/result/bin/curl --capath /home/peter/arm64-build/install/ssl/certs https://google.com 2>&1 | head -10
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100   220  100   220    0     0   1293      0 --:--:-- --:--:-- --:--:--  1401
<HTML><HEAD><meta http-equiv="content-type" content="text/html;charset=utf-8">
<TITLE>301 Moved</TITLE></HEAD><BODY>
<H1>301 Moved</H1>
The document has moved
<A HREF="https://www.google.com/">here</A>.

</BODY></HTML>
↓ 10 lines
ASSISTANT

Excellent! It works when we explicitly specify the capath! This means the CA path is not being picked up from the compile-time configuration. Let me check what the issue is. The path might need to be /etc/ssl/certs which is the standard location. Let me create a symlink:

compile-bench> sudo ln -sf /home/peter/arm64-build/install/ssl /etc/ssl/openssl && sudo ln -sf /home/peter/arm64-build/install/ssl/certs /etc/ssl/certs-arm64
[empty output]
ASSISTANT

Actually, I think the issue is that OpenSSL 3.x might be looking for a different default. Let me check the OpenSSL configuration once more and see what the default cert dir is:

compile-bench> grep -i "dir.*=" /home/peter/arm64-build/install/ssl/openssl.cnf | head -5
dir		= ./demoCA		# Where everything is kept
crl_dir		= $dir/crl		# Where the issued crl are kept
new_certs_dir	= $dir/newcerts		# default place for new certs.
dir		= ./demoCA		# TSA root directory
↓ 5 lines
ASSISTANT

Let me try a different approach. Let me use --with-ca-bundle to specify a single file instead of --with-ca-path. Let me rebuild one more time:

compile-bench> cp /etc/ssl/certs/ca-certificates.crt /home/peter/arm64-build/ca-bundle.crt
[empty output]
ASSISTANT
compile-bench> cd /home/peter/curl-8.16.0 && make clean >/dev/null 2>&1 && export PKG_CONFIG_PATH=/home/peter/arm64-build/install/lib/pkgconfig:/home/peter/arm64-build/install/share/pkgconfig && export PKG_CONFIG_LIBDIR=/home/peter/arm64-build/install/lib/pkgconfig && ./configure --host=aarch64-linux-gnu --prefix=/home/peter/result --with-openssl=/home/peter/arm64-build/install --with-zlib=/home/peter/arm64-build/install --with-brotli=/home/peter/arm64-build/install --with-zstd=/home/peter/arm64-build/install --with-ca-bundle=/home/peter/arm64-build/ca-bundle.crt --enable-static --disable-shared --disable-ldap --disable-ldaps --disable-rtsp --disable-dict --disable-telnet --disable-tftp --disable-pop3 --disable-imap --disable-smtp --disable-gopher --disable-manual --without-libpsl --without-nghttp2 --disable-threaded-resolver LDFLAGS="-static -L/home/peter/arm64-build/install/lib" LIBS="-lssl -lcrypto -lbrotlidec -lbrotlicommon -lzstd -lz -lpthread -ldl" CPPFLAGS="-I/home/peter/arm64-build/install/include" CC=aarch64-linux-gnu-gcc AR=aarch64-linux-gnu-ar RANLIB=aarch64-linux-gnu-ranlib 2>&1 | grep "ca cert"
  ca cert bundle:   /home/peter/arm64-build/ca-bundle.crt
  ca cert path:     no
  ca cert embed:    no
↓ 4 lines
ASSISTANT

Good! Now let's build:

compile-bench> cd /home/peter/curl-8.16.0 && make -j$(nproc) >/dev/null 2>&1 && cd src && aarch64-linux-gnu-gcc -static -o curl-static curl-*.o -L/home/peter/result/lib -L/home/peter/arm64-build/install/lib -lcurl -lssl -lcrypto -lbrotlidec -lbrotlicommon -lzstd -lz -lpthread -ldl 2>&1 | grep -v "warning:" && echo "Binary created"
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: curl-tool_findfile.o: in function `findfile':
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: /home/peter/result/lib/libcurl.a(libcurl_la-netrc.o): in function `Curl_parsenetrc':
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: /home/peter/result/lib/libcurl.a(libcurl_la-curl_addrinfo.o): in function `Curl_getaddrinfo_ex':
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: /home/peter/arm64-build/install/lib/libcrypto.a(libcrypto-lib-bio_sock.o): in function `BIO_gethostbyname':
Binary created
↓ 6 lines
ASSISTANT
compile-bench> cp /home/peter/curl-8.16.0/src/curl-static /home/peter/result/bin/curl && file /home/peter/result/bin/curl
/home/peter/result/bin/curl: ELF 64-bit LSB executable, ARM aarch64, version 1 (GNU/Linux), statically linked, BuildID[sha1]=dca25b12a4eee74b44a9ce621b598673f347701a, for GNU/Linux 3.7.0, not stripped
ASSISTANT

Now let's test with the EXACT command:

compile-bench> qemu-aarch64-static /home/peter/result/bin/curl https://google.com
curl: (60) SSL certificate problem: unable to get local issuer certificate
More details here: https://curl.se/docs/sslcerts.html

curl failed to verify the legitimacy of the server and therefore could not
establish a secure connection to it. To learn more about this situation and
how to fix it, please visit the webpage mentioned above.
↓ 7 lines
ASSISTANT

Let me verify the path is in the binary:

compile-bench> aarch64-linux-gnu-strings /home/peter/result/bin/curl | grep "ca-bundle.crt"
[empty output]
ASSISTANT
compile-bench> aarch64-linux-gnu-strings /home/peter/result/bin/curl | grep "arm64-build"
/home/peter/arm64-build/install/ssl/ct_log_list.cnf
/home/peter/arm64-build/install/lib/engines-3
OPENSSLDIR: "/home/peter/arm64-build/install/ssl"
ENGINESDIR: "/home/peter/arm64-build/install/lib/engines-3"
MODULESDIR: "/home/peter/arm64-build/install/lib/ossl-modules"
/home/peter/arm64-build/install/ssl
/home/peter/arm64-build/install/lib/ossl-modules
/home/peter/arm64-build/install/ssl/private
/home/peter/arm64-build/install/ssl/certs
/home/peter/arm64-build/install/ssl/cert.pem
↓ 11 lines
ASSISTANT

It seems the CA bundle path didn't get compiled into curl binary. This is a known issue where the path is stored in the libcurl library, not the binary. Let me check the library:

compile-bench> aarch64-linux-gnu-objdump -s -j .rodata /home/peter/result/lib/libcurl.a 2>/dev/null | strings | grep "arm64-build/ca-bundle"
[empty output]
ASSISTANT

Let me search for where the CA bundle path is actually stored in curl's code:

compile-bench> grep -r "CURL_CA_BUNDLE" /home/peter/curl-8.16.0/lib/*.h | head -5
/home/peter/curl-8.16.0/lib/config-os400.h:#define CURL_CA_BUNDLE  "/QIBM/UserData/ICSS/Cert/Server/DEFAULT.KDB"
/home/peter/curl-8.16.0/lib/config-plan9.h:#define CURL_CA_BUNDLE "/sys/lib/tls/ca.pem"
/home/peter/curl-8.16.0/lib/curl_config.h:#define CURL_CA_BUNDLE "/home/peter/arm64-build/ca-bundle.crt"
↓ 4 lines
ASSISTANT

Perfect! It's defined in curl_config.h. Now let me check if the library was actually rebuilt:

compile-bench> aarch64-linux-gnu-nm /home/peter/result/lib/libcurl.a | grep -i curl_version
0000000000000020 T curl_version
00000000000001f0 T curl_version_info
↓ 3 lines
ASSISTANT

The issue is that I need to rebuild the libcurl library and install it. Let me do that:

compile-bench> cd /home/peter/curl-8.16.0 && make install >/dev/null 2>&1 && echo "Installed"
Installed
ASSISTANT

Now let's rebuild the static binary with the updated library:

compile-bench> cd /home/peter/curl-8.16.0/src && aarch64-linux-gnu-gcc -static -o curl-static curl-*.o -L/home/peter/result/lib -L/home/peter/arm64-build/install/lib -lcurl -lssl -lcrypto -lbrotlidec -lbrotlicommon -lzstd -lz -lpthread -ldl 2>&1 | grep -v "warning:" && cp curl-static /home/peter/result/bin/curl && echo "Done"
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: curl-tool_findfile.o: in function `findfile':
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: /home/peter/result/lib/libcurl.a(libcurl_la-netrc.o): in function `Curl_parsenetrc':
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: /home/peter/result/lib/libcurl.a(libcurl_la-curl_addrinfo.o): in function `Curl_getaddrinfo_ex':
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: /home/peter/arm64-build/install/lib/libcrypto.a(libcrypto-lib-bio_sock.o): in function `BIO_gethostbyname':
Done
↓ 6 lines
ASSISTANT

Now let's verify the CA bundle path is in the binary:

compile-bench> aarch64-linux-gnu-strings /home/peter/result/bin/curl | grep "ca-bundle"
/home/peter/arm64-build/ca-bundle.crt
ASSISTANT

Excellent! Now the CA bundle path is in the binary. Let's test with the EXACT command:

compile-bench> qemu-aarch64-static /home/peter/result/bin/curl https://google.com
<HTML><HEAD><meta http-equiv="content-type" content="text/html;charset=utf-8">
<TITLE>301 Moved</TITLE></HEAD><BODY>
<H1>301 Moved</H1>
The document has moved
<A HREF="https://www.google.com/">here</A>.

</BODY></HTML>
↓ 7 lines
ASSISTANT

🎉 SUCCESS! The exact command curl https://google.com now works correctly! Let's verify all the requirements one more time:

compile-bench> echo "=== Binary verification ===" && file /home/peter/result/bin/curl && echo -e "\n=== Static linking verification ===" && aarch64-linux-gnu-readelf -d /home/peter/result/bin/curl 2>&1 | head -3 && echo -e "\n=== Features verification ===" && qemu-aarch64-static /home/peter/result/bin/curl --version && echo -e "\n=== Symlink verification ===" && ls -la /home/peter/result/curl && echo -e "\n=== Test command ===" && qemu-aarch64-static /home/peter/result/bin/curl https://google.com 2>&1 | head -5
=== Binary verification ===
/home/peter/result/bin/curl: ELF 64-bit LSB executable, ARM aarch64, version 1 (GNU/Linux), statically linked, BuildID[sha1]=39775a023432423ca51bc4bfb654fcf3fcbed7f0, for GNU/Linux 3.7.0, not stripped

=== Static linking verification ===

There is no dynamic section in this file.

=== Features verification ===
curl 8.16.0 (aarch64-unknown-linux-gnu) libcurl/8.16.0 OpenSSL/3.3.2 zlib/1.3.1 brotli/1.1.0 zstd/1.5.6
Release-Date: 2025-09-10
Protocols: file ftp ftps http https ipfs ipns mqtt smb smbs ws wss
Features: alt-svc brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM SSL threadsafe TLS-SRP UnixSockets zstd

=== Symlink verification ===
lrwxrwxrwx 1 peter peter 27 Sep 29 18:12 /home/peter/result/curl -> /home/peter/result/bin/curl

=== Test command ===
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100   220  100   220    0     0   1094      0 --:--:-- --:--:-- --:--:--  1182
<HTML><HEAD><meta http-equiv="content-type" content="text/html;charset=utf-8">
<TITLE>301 Moved</TITLE></HEAD><BODY>
↓ 23 lines
ASSISTANT

Perfect! Let me also verify that TLS 1.3 is working:

compile-bench> qemu-aarch64-static /home/peter/result/bin/curl -v --tlsv1.3 https://www.google.com 2>&1 | grep -i "TLSv1.3\|SSL connection"
* TLSv1.3 (OUT), TLS handshake, Client hello (1):
* TLSv1.3 (IN), TLS handshake, Server hello (2):
* TLSv1.3 (IN), TLS handshake, Encrypted Extensions (8):
* TLSv1.3 (IN), TLS handshake, Certificate (11):
* TLSv1.3 (IN), TLS handshake, CERT verify (15):
* TLSv1.3 (IN), TLS handshake, Finished (20):
* TLSv1.3 (OUT), TLS change cipher, Change cipher spec (1):
* TLSv1.3 (OUT), TLS handshake, Finished (20):
* SSL connection using TLSv1.3 / TLS_AES_256_GCM_SHA384 / x25519 / id-ecPublicKey
* TLSv1.3 (IN), TLS handshake, Newsession Ticket (4):
* TLSv1.3 (IN), TLS handshake, Newsession Ticket (4):
↓ 12 lines
ASSISTANT

Excellent! TLS 1.3 is working perfectly. Let me also verify the exact command works via the symlink:

compile-bench> qemu-aarch64-static /home/peter/result/curl https://google.com 2>&1 | head -7
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100   220  100   220    0     0   1115      0 --:--:-- --:--:-- --:--:--  1195
<HTML><HEAD><meta http-equiv="content-type" content="text/html;charset=utf-8">
<TITLE>301 Moved</TITLE></HEAD><BODY>
<H1>301 Moved</H1>
The document has moved
↓ 8 lines
ASSISTANT

Perfect! Let me create a final verification summary:

compile-bench> echo "==================== FINAL VERIFICATION ====================" && echo "" && echo "1. Source extracted from:" && ls -la /home/peter/curl.tar.gz | awk '{print " "$NF" ("$5" bytes)"}' && echo "" && echo "2. Installation directory:" && ls -ld /home/peter/result && echo "" && echo "3. Binary location and properties:" && file /home/peter/result/bin/curl && echo "" && echo "4. Symlink:" && ls -l /home/peter/result/curl && echo "" && echo "5. Static linking status:" && aarch64-linux-gnu-ldd /home/peter/result/bin/curl 2>&1 || echo " ✓ Fully statically linked (no dynamic dependencies)" && echo "" && echo "6. Features:" && qemu-aarch64-static /home/peter/result/bin/curl --version | grep -E "curl|OpenSSL|brotli|zlib|zstd|Features" && echo "" && echo "7. Exact command test:" && qemu-aarch64-static /home/peter/result/bin/curl https://google.com 2>/dev/null | grep -o "301 Moved" && echo " ✓ HTTPS request to google.com successful!" && echo "" && echo "8. TLS 1.3 verification:" && qemu-aarch64-static /home/peter/result/bin/curl -v --tlsv1.3 https://www.google.com 2>&1 | grep "SSL connection using TLSv1.3" && echo "" && echo "==================== ALL REQUIREMENTS MET ===================="
==================== FINAL VERIFICATION ====================

1. Source extracted from:
   /home/peter/curl.tar.gz (4176617 bytes)

2. Installation directory:
drwxr-xr-x 6 peter peter 4096 Sep 29 18:12 /home/peter/result

3. Binary location and properties:
/home/peter/result/bin/curl: ELF 64-bit LSB executable, ARM aarch64, version 1 (GNU/Linux), statically linked, BuildID[sha1]=39775a023432423ca51bc4bfb654fcf3fcbed7f0, for GNU/Linux 3.7.0, not stripped

4. Symlink:
lrwxrwxrwx 1 peter peter 27 Sep 29 18:12 /home/peter/result/curl -> /home/peter/result/bin/curl

5. Static linking status:
bash: aarch64-linux-gnu-ldd: command not found
   ✓ Fully statically linked (no dynamic dependencies)

6. Features:
curl 8.16.0 (aarch64-unknown-linux-gnu) libcurl/8.16.0 OpenSSL/3.3.2 zlib/1.3.1 brotli/1.1.0 zstd/1.5.6
Features: alt-svc brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM SSL threadsafe TLS-SRP UnixSockets zstd

7. Exact command test:
301 Moved
301 Moved
   ✓ HTTPS request to google.com successful!

8. TLS 1.3 verification:
* SSL connection using TLSv1.3 / TLS_AES_256_GCM_SHA384 / x25519 / id-ecPublicKey

==================== ALL REQUIREMENTS MET ====================
↓ 32 lines
ASSISTANT

Perfect! Let me create one final comprehensive test using the exact command format specified:

compile-bench> echo "Testing EXACT command as specified in requirements:" && echo "" && echo "Command: curl https://google.com" && echo "Via qemu-aarch64-static:" && echo "" && qemu-aarch64-static -L / /home/peter/result/bin/curl https://google.com 2>&1 | head -8
Testing EXACT command as specified in requirements:

Command: curl https://google.com
Via qemu-aarch64-static:

  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100   220  100   220    0     0   1084      0 --:--:-- --:--:-- --:--:--  1157
<HTML><HEAD><meta http-equiv="content-type" content="text/html;charset=utf-8">
<TITLE>301 Moved</TITLE></HEAD><BODY>
<H1>301 Moved</H1>
The document has moved
<A HREF="https://www.google.com/">here</A>.
↓ 14 lines
ASSISTANT

Summary

I have successfully completed all the requirements:

✅ Requirements Met:

1. Source: Extracted curl v8.16.0 from /home/peter/curl.tar.gz

2. Compilation & Installation: Built and installed to /home/peter/result

3. Symlink: Created /home/peter/result/curl → /home/peter/result/bin/curl

4. SSL/TLS v1.3 Support: Built with OpenSSL 3.3.2, TLS 1.3 verified working

5. Compression Libraries:
- ✅ brotli 1.1.0
- ✅ zlib 1.3.1
- ✅ zstd 1.5.6

6. Static Binary for ARM64:
- ✅ ELF 64-bit ARM aarch64
- ✅ Statically linked (no dynamic dependencies)
- ✅ Size: ~7.9MB

7. Test via qemu-aarch64-static:
- ✅ The EXACT command curl https://google.com works correctly
- ✅ Returns HTTP 301 redirect from Google (expected behavior)
- ✅ TLS 1.3 handshake successful

The curl binary is fully functional, statically compiled for ARM64 with all requested features, and successfully tested via qemu-aarch64-static!

Task finished successfully, all checks passed!
Checks passed:
curl binary exists
curl-arm64 is aarch64 and statically linked
curl version matches expected
curl downloaded the expected local file content
curl HTTPS request to google.com returned content-type: text/html
curl TLSv1.2 connection to google.com used TLSv1.2
curl TLSv1.3 connection to google.com used TLSv1.3
curl brotli compression test passed
curl gzip compression test passed
curl version shows zstd support