Summary
Performance
| Cost | $0.039 |
| Total elapsed time | 1m47s |
| LLM inference time | 1m18s |
| Command execution time | 29s |
| Commands executed | 16 |
All details >
| Attempt ID | sb9e19g4y17s9 | Attempt group | run-23-09-21-48 |
| Revision | ad46875d9374 | AWS Instance | m8i.2xlarge |
| Start time | 2025-09-23T20:12:21.330Z | End time | 2025-09-23T20:14:08.688Z |
| Task | curl | Environment | ubuntu-22.04-amd64-offline |
| Model |  deepseek-v3.1-terminus | OpenRouter slug | deepseek/deepseek-v3.1-terminus |
| Temperature | 1 | Explicit prompt caching | false |
| User msg after tool call | false | Max tool calls | 70 |
| Total timeout seconds | 900 | Single command timeout | 600 |
| Cost | $0.039 | Duration | 1m47s |
| LLM inference time | 1m18s | Command execution time | 29s |
| Final context tokens | 13,957 | Total output tokens | 1,357 |
| Output reasoning tokens | 0 | Messages | 35 |
| Assistant messages | 17 | User messages | 1 |
| System messages | 1 | Commands executed | 16 |
Task
Task: curl
curl 8.16.0 is a command-line HTTP client.
Project link: curl.se
Task:
Compile and install curl to a specific location.
Difficulties:
Standard build, nothing special.
Environment:
Ubuntu 22.04 on amd64, without internet access.
Execution log
SYSTEM
You are a package-building specialist operating a Ubuntu 22.04 bash shell via one tool: run_terminal_cmd.
The current working directory of every run_terminal_cmd is /home/peter.
Execution rules:
- Always pass non-interactive flags for any command that could prompt (e.g., -y, --yes, DEBIAN_FRONTEND=noninteractive).
- Don't include any newlines in the command.
- The environment is offline, assume you have all the necessary tools already installed.
If you encounter any errors or issues while doing the user's request, you must fix them and continue the task.
At the end verify you did the user request correctly.
USER
You are given a curl v8.16.0 source code at /home/peter/curl.tar.gz. Please compile curl and install it to /home/peter/result. Create a symlink from /home/peter/result/curl to the actual binary. Make it build even if some third party dependencies are not available.
ASSISTANT
I'll help you compile curl v8.16.0 and install it to /home/peter/result. Let me start by extracting the source code and then compiling it with minimal dependencies.
First, let's extract the curl source code:
compile-bench> tar -xzf /home/peter/curl.tar.gz -C /home/peter/
[empty output]
ASSISTANT
Now let's check what was extracted and navigate to the curl source directory:
compile-bench> ls -la /home/peter/ | grep curl drwxr-xr-x 14 peter peter 4096 Sep 10 05:43 curl-8.16.0
-rw-r--r-- 1 peter peter 4176617 Sep 23 20:12 curl.tar.gz
↓ 3 lines
compile-bench> ls -la /home/peter/ | grep curl
drwxr-xr-x 14 peter peter 4096 Sep 10 05:43 curl-8.16.0 -rw-r--r-- 1 peter peter 4176617 Sep 23 20:12 curl.tar.gz
ASSISTANT
Good, the source has been extracted. Now let's navigate to the curl source directory and configure it with minimal dependencies:
compile-bench> cd /home/peter/curl-8.16.0 && ./configure --prefix=/home/peter/result --disable-manual --without-zlib --without-ssl --without-libssh2 --without-librtmp --without-libidn2 --without-nghttp2 checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for ar... /usr/bin/ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking how to run the C preprocessor... gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for grep that handles long lines and -e... (cached) /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking if OS is AIX (to define _ALL_SOURCE)... no
checking if _THREAD_SAFE is already defin
[command output truncated]
piler is Tiny C... no
checking whether build target is a native Windows one... no
checking if compiler accepts some basic options... yes
configure: compiler options added: -Werror-implicit-function-declaration
checking if compiler optimizer assumed setting might be used... yes
checking if compiler accepts optimizer enabling options... yes
configure: compiler options added: -O2
checking if compiler accepts strict warning options... yes
configure: compiler options added: -Wno-system-headers
checking if compiler halts on compilation errors... yes
checking if compiler halts on negative sized arrays... yes
checking if compiler halts on function prototype mismatch... yes
checking if compiler supports hiding library internal symbols... yes
checking whether build target supports Win32 crypto API... no
checking whether to build libcurl and curl in "unity" mode... no
checking whether to support http... yes
checking whether to support ftp... yes
checking whether to support file... yes
checking whether to support IPFS... yes
checking whether to support ldap... yes
checking whether to support ldaps... yes
checking whether to support rtsp... yes
checking whether to support proxies... yes
checking whether to support dict... yes
checking whether to support telnet... yes
checking whether to support tftp... yes
checking whether to support pop3... yes
checking whether to support imap... yes
checking whether to support smb... yes
checking whether to support smtp... yes
checking whether to support gopher... yes
checking whether to support mqtt... no
checking whether to provide built-in manual... no
checking whether to build documentation... yes
checking whether to enable generation of C code... yes
checking whether to use libgcc... no
checking if X/Open network library is required... no
checking for gethostbyname... yes
checking whether build target is a native Windows one... (cached) no
checking for proto/bsdsocket.h... no
checking for connect in libraries... yes
checking for sys/types.h... (cached) yes
checking for monotonic clock_gettime... yes
checking for clock_gettime in libraries... no additional lib required
checking if monotonic clock_gettime works... yes
checking for sys/types.h... (cached) yes
checking for raw monotonic clock_gettime... yes
configure: WARNING: zlib disabled
checking for BrotliDecoderDecompress in -lbrotlidec... no
checking for brotli/decode.h... no
checking for ZSTD_createDStream in -lzstd... no
checking for zstd.h... no
checking whether to enable IPv6... yes
checking if struct sockaddr_in6 has sin6_scope_id member... yes
checking if argv can be written to... yes
checking if GSS-API support is requested... no
checking whether to enable Windows native SSL/TLS... no
checking whether to enable Amiga native SSL/TLS (AmiSSL v5)... no
checking for pkg-config... no
checking for psl_builtin in -lpsl... no
configure: error: libpsl libs and/or directories were not found where specified!
↓ 130 lines
compile-bench> cd /home/peter/curl-8.16.0 && ./configure --prefix=/home/peter/result --disable-manual --without-zlib --without-ssl --without-libssh2 --without-librtmp --without-libidn2 --without-nghttp2
checking whether to enable maintainer-specific portions of Makefiles... no checking whether make supports nested variables... yes checking whether to enable debug build options... no checking whether to enable compiler optimizer... (assumed) yes checking whether to enable strict compiler warnings... no checking whether to enable compiler warnings as errors... no checking whether to enable curl debug memory tracking... no checking whether to enable hiding of library internal symbols... yes checking whether to enable c-ares for DNS lookups... no checking whether to disable dependency on -lrt... (assumed no) checking whether to enable HTTPSRR support... no checking whether to enable ECH support... no checking whether to enable SSL session export support... no checking for path separator... : checking for sed... /usr/bin/sed checking for grep... /usr/bin/grep checking that grep -E works... yes checking for ar... /usr/bin/ar checking for a BSD-compatible install... /usr/bin/install -c checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking how to run the C preprocessor... gcc -E checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for stdatomic.h... yes checking if _Atomic is available... yes checking for a sed that does not truncate output... (cached) /usr/bin/sed checking for code coverage support... no checking whether build environment is sane... yes checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... gcc3 checking curl version... 8.16.0 checking for perl... /usr/bin/perl checking for httpd... no checking for apache2... no checking for apxs... no configure: httpd/apache2 not in PATH, http tests disabled configure: apxs not in PATH, http tests disabled checking for danted... no checking for danted... no checking for nghttpx... no checking for caddy... no checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... /usr/bin/grep -E checking if OS is AIX (to define _ALL_SOURCE)... no checking if _THREAD_SAFE is already defin [command output truncated] piler is Tiny C... no checking whether build target is a native Windows one... no checking if compiler accepts some basic options... yes configure: compiler options added: -Werror-implicit-function-declaration checking if compiler optimizer assumed setting might be used... yes checking if compiler accepts optimizer enabling options... yes configure: compiler options added: -O2 checking if compiler accepts strict warning options... yes configure: compiler options added: -Wno-system-headers checking if compiler halts on compilation errors... yes checking if compiler halts on negative sized arrays... yes checking if compiler halts on function prototype mismatch... yes checking if compiler supports hiding library internal symbols... yes checking whether build target supports Win32 crypto API... no checking whether to build libcurl and curl in "unity" mode... no checking whether to support http... yes checking whether to support ftp... yes checking whether to support file... yes checking whether to support IPFS... yes checking whether to support ldap... yes checking whether to support ldaps... yes checking whether to support rtsp... yes checking whether to support proxies... yes checking whether to support dict... yes checking whether to support telnet... yes checking whether to support tftp... yes checking whether to support pop3... yes checking whether to support imap... yes checking whether to support smb... yes checking whether to support smtp... yes checking whether to support gopher... yes checking whether to support mqtt... no checking whether to provide built-in manual... no checking whether to build documentation... yes checking whether to enable generation of C code... yes checking whether to use libgcc... no checking if X/Open network library is required... no checking for gethostbyname... yes checking whether build target is a native Windows one... (cached) no checking for proto/bsdsocket.h... no checking for connect in libraries... yes checking for sys/types.h... (cached) yes checking for monotonic clock_gettime... yes checking for clock_gettime in libraries... no additional lib required checking if monotonic clock_gettime works... yes checking for sys/types.h... (cached) yes checking for raw monotonic clock_gettime... yes configure: WARNING: zlib disabled checking for BrotliDecoderDecompress in -lbrotlidec... no checking for brotli/decode.h... no checking for ZSTD_createDStream in -lzstd... no checking for zstd.h... no checking whether to enable IPv6... yes checking if struct sockaddr_in6 has sin6_scope_id member... yes checking if argv can be written to... yes checking if GSS-API support is requested... no checking whether to enable Windows native SSL/TLS... no checking whether to enable Amiga native SSL/TLS (AmiSSL v5)... no checking for pkg-config... no checking for psl_builtin in -lpsl... no configure: error: libpsl libs and/or directories were not found where specified!
ASSISTANT
The configure failed due to libpsl. Let's try with more dependency disabling options:
compile-bench> cd /home/peter/curl-8.16.0 && ./configure --prefix=/home/peter/result --disable-manual --without-zlib --without-ssl --without-libssh2 --without-librtmp --without-libidn2 --without-nghttp2 --without-psl configure: WARNING: unrecognized options: --without-psl
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for ar... /usr/bin/ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking how to run the C preprocessor... gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for grep that handles long lines and -e... (cached) /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking if OS is AIX (to define _ALL
[command output truncated]
piler is Tiny C... no
checking whether build target is a native Windows one... no
checking if compiler accepts some basic options... yes
configure: compiler options added: -Werror-implicit-function-declaration
checking if compiler optimizer assumed setting might be used... yes
checking if compiler accepts optimizer enabling options... yes
configure: compiler options added: -O2
checking if compiler accepts strict warning options... yes
configure: compiler options added: -Wno-system-headers
checking if compiler halts on compilation errors... yes
checking if compiler halts on negative sized arrays... yes
checking if compiler halts on function prototype mismatch... yes
checking if compiler supports hiding library internal symbols... yes
checking whether build target supports Win32 crypto API... no
checking whether to build libcurl and curl in "unity" mode... no
checking whether to support http... yes
checking whether to support ftp... yes
checking whether to support file... yes
checking whether to support IPFS... yes
checking whether to support ldap... yes
checking whether to support ldaps... yes
checking whether to support rtsp... yes
checking whether to support proxies... yes
checking whether to support dict... yes
checking whether to support telnet... yes
checking whether to support tftp... yes
checking whether to support pop3... yes
checking whether to support imap... yes
checking whether to support smb... yes
checking whether to support smtp... yes
checking whether to support gopher... yes
checking whether to support mqtt... no
checking whether to provide built-in manual... no
checking whether to build documentation... yes
checking whether to enable generation of C code... yes
checking whether to use libgcc... no
checking if X/Open network library is required... no
checking for gethostbyname... yes
checking whether build target is a native Windows one... (cached) no
checking for proto/bsdsocket.h... no
checking for connect in libraries... yes
checking for sys/types.h... (cached) yes
checking for monotonic clock_gettime... yes
checking for clock_gettime in libraries... no additional lib required
checking if monotonic clock_gettime works... yes
checking for sys/types.h... (cached) yes
checking for raw monotonic clock_gettime... yes
configure: WARNING: zlib disabled
checking for BrotliDecoderDecompress in -lbrotlidec... no
checking for brotli/decode.h... no
checking for ZSTD_createDStream in -lzstd... no
checking for zstd.h... no
checking whether to enable IPv6... yes
checking if struct sockaddr_in6 has sin6_scope_id member... yes
checking if argv can be written to... yes
checking if GSS-API support is requested... no
checking whether to enable Windows native SSL/TLS... no
checking whether to enable Amiga native SSL/TLS (AmiSSL v5)... no
checking for pkg-config... no
checking for psl_builtin in -lpsl... no
configure: error: libpsl libs and/or directories were not found where specified!
↓ 130 lines
compile-bench> cd /home/peter/curl-8.16.0 && ./configure --prefix=/home/peter/result --disable-manual --without-zlib --without-ssl --without-libssh2 --without-librtmp --without-libidn2 --without-nghttp2 --without-psl
configure: WARNING: unrecognized options: --without-psl checking whether to enable maintainer-specific portions of Makefiles... no checking whether make supports nested variables... yes checking whether to enable debug build options... no checking whether to enable compiler optimizer... (assumed) yes checking whether to enable strict compiler warnings... no checking whether to enable compiler warnings as errors... no checking whether to enable curl debug memory tracking... no checking whether to enable hiding of library internal symbols... yes checking whether to enable c-ares for DNS lookups... no checking whether to disable dependency on -lrt... (assumed no) checking whether to enable HTTPSRR support... no checking whether to enable ECH support... no checking whether to enable SSL session export support... no checking for path separator... : checking for sed... /usr/bin/sed checking for grep... /usr/bin/grep checking that grep -E works... yes checking for ar... /usr/bin/ar checking for a BSD-compatible install... /usr/bin/install -c checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking how to run the C preprocessor... gcc -E checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for stdatomic.h... yes checking if _Atomic is available... yes checking for a sed that does not truncate output... (cached) /usr/bin/sed checking for code coverage support... no checking whether build environment is sane... yes checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... gcc3 checking curl version... 8.16.0 checking for perl... /usr/bin/perl checking for httpd... no checking for apache2... no checking for apxs... no configure: httpd/apache2 not in PATH, http tests disabled configure: apxs not in PATH, http tests disabled checking for danted... no checking for danted... no checking for nghttpx... no checking for caddy... no checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... /usr/bin/grep -E checking if OS is AIX (to define _ALL [command output truncated] piler is Tiny C... no checking whether build target is a native Windows one... no checking if compiler accepts some basic options... yes configure: compiler options added: -Werror-implicit-function-declaration checking if compiler optimizer assumed setting might be used... yes checking if compiler accepts optimizer enabling options... yes configure: compiler options added: -O2 checking if compiler accepts strict warning options... yes configure: compiler options added: -Wno-system-headers checking if compiler halts on compilation errors... yes checking if compiler halts on negative sized arrays... yes checking if compiler halts on function prototype mismatch... yes checking if compiler supports hiding library internal symbols... yes checking whether build target supports Win32 crypto API... no checking whether to build libcurl and curl in "unity" mode... no checking whether to support http... yes checking whether to support ftp... yes checking whether to support file... yes checking whether to support IPFS... yes checking whether to support ldap... yes checking whether to support ldaps... yes checking whether to support rtsp... yes checking whether to support proxies... yes checking whether to support dict... yes checking whether to support telnet... yes checking whether to support tftp... yes checking whether to support pop3... yes checking whether to support imap... yes checking whether to support smb... yes checking whether to support smtp... yes checking whether to support gopher... yes checking whether to support mqtt... no checking whether to provide built-in manual... no checking whether to build documentation... yes checking whether to enable generation of C code... yes checking whether to use libgcc... no checking if X/Open network library is required... no checking for gethostbyname... yes checking whether build target is a native Windows one... (cached) no checking for proto/bsdsocket.h... no checking for connect in libraries... yes checking for sys/types.h... (cached) yes checking for monotonic clock_gettime... yes checking for clock_gettime in libraries... no additional lib required checking if monotonic clock_gettime works... yes checking for sys/types.h... (cached) yes checking for raw monotonic clock_gettime... yes configure: WARNING: zlib disabled checking for BrotliDecoderDecompress in -lbrotlidec... no checking for brotli/decode.h... no checking for ZSTD_createDStream in -lzstd... no checking for zstd.h... no checking whether to enable IPv6... yes checking if struct sockaddr_in6 has sin6_scope_id member... yes checking if argv can be written to... yes checking if GSS-API support is requested... no checking whether to enable Windows native SSL/TLS... no checking whether to enable Amiga native SSL/TLS (AmiSSL v5)... no checking for pkg-config... no checking for psl_builtin in -lpsl... no configure: error: libpsl libs and/or directories were not found where specified!
ASSISTANT
Let me try with different options to disable various dependencies:
compile-bench> cd curl-8.16.0 && ./configure --prefix=/home/peter/result --without-ssl --without-zlib --without-nghttp2 --without-libidn2 --without-libssh2 --without-gssapi --without-psl --without-brotli --without-zstd --disable-ldap --disable-ldaps configure: WARNING: unrecognized options: --without-psl
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for ar... /usr/bin/ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking how to run the C preprocessor... gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for grep that handles long lines and -e... (cached) /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking if OS is AIX (to define _ALL
[command output truncated]
compiler is clang... no
checking if compiler is GNU C... yes
checking compiler version... gcc '1100' (raw: '11')
checking if compiler is SunPro C... no
checking if compiler is Tiny C... no
checking whether build target is a native Windows one... no
checking if compiler accepts some basic options... yes
configure: compiler options added: -Werror-implicit-function-declaration
checking if compiler optimizer assumed setting might be used... yes
checking if compiler accepts optimizer enabling options... yes
configure: compiler options added: -O2
checking if compiler accepts strict warning options... yes
configure: compiler options added: -Wno-system-headers
checking if compiler halts on compilation errors... yes
checking if compiler halts on negative sized arrays... yes
checking if compiler halts on function prototype mismatch... yes
checking if compiler supports hiding library internal symbols... yes
checking whether build target supports Win32 crypto API... no
checking whether to build libcurl and curl in "unity" mode... no
checking whether to support http... yes
checking whether to support ftp... yes
checking whether to support file... yes
checking whether to support IPFS... yes
checking whether to support ldap... no
checking whether to support ldaps... no
checking whether to support rtsp... yes
checking whether to support proxies... yes
checking whether to support dict... yes
checking whether to support telnet... yes
checking whether to support tftp... yes
checking whether to support pop3... yes
checking whether to support imap... yes
checking whether to support smb... yes
checking whether to support smtp... yes
checking whether to support gopher... yes
checking whether to support mqtt... no
checking whether to provide built-in manual... yes
checking whether to build documentation... yes
checking whether to enable generation of C code... yes
checking whether to use libgcc... no
checking if X/Open network library is required... no
checking for gethostbyname... yes
checking whether build target is a native Windows one... (cached) no
checking for proto/bsdsocket.h... no
checking for connect in libraries... yes
checking for sys/types.h... (cached) yes
checking for monotonic clock_gettime... yes
checking for clock_gettime in libraries... no additional lib required
checking if monotonic clock_gettime works... yes
checking for sys/types.h... (cached) yes
checking for raw monotonic clock_gettime... yes
configure: WARNING: zlib disabled
checking whether to enable IPv6... yes
checking if struct sockaddr_in6 has sin6_scope_id member... yes
checking if argv can be written to... yes
checking if GSS-API support is requested... no
checking whether to enable Windows native SSL/TLS... no
checking whether to enable Amiga native SSL/TLS (AmiSSL v5)... no
checking for pkg-config... no
checking for psl_builtin in -lpsl... no
configure: error: libpsl libs and/or directories were not found where specified!
↓ 130 lines
compile-bench> cd curl-8.16.0 && ./configure --prefix=/home/peter/result --without-ssl --without-zlib --without-nghttp2 --without-libidn2 --without-libssh2 --without-gssapi --without-psl --without-brotli --without-zstd --disable-ldap --disable-ldaps
configure: WARNING: unrecognized options: --without-psl checking whether to enable maintainer-specific portions of Makefiles... no checking whether make supports nested variables... yes checking whether to enable debug build options... no checking whether to enable compiler optimizer... (assumed) yes checking whether to enable strict compiler warnings... no checking whether to enable compiler warnings as errors... no checking whether to enable curl debug memory tracking... no checking whether to enable hiding of library internal symbols... yes checking whether to enable c-ares for DNS lookups... no checking whether to disable dependency on -lrt... (assumed no) checking whether to enable HTTPSRR support... no checking whether to enable ECH support... no checking whether to enable SSL session export support... no checking for path separator... : checking for sed... /usr/bin/sed checking for grep... /usr/bin/grep checking that grep -E works... yes checking for ar... /usr/bin/ar checking for a BSD-compatible install... /usr/bin/install -c checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking how to run the C preprocessor... gcc -E checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for stdatomic.h... yes checking if _Atomic is available... yes checking for a sed that does not truncate output... (cached) /usr/bin/sed checking for code coverage support... no checking whether build environment is sane... yes checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... gcc3 checking curl version... 8.16.0 checking for perl... /usr/bin/perl checking for httpd... no checking for apache2... no checking for apxs... no configure: httpd/apache2 not in PATH, http tests disabled configure: apxs not in PATH, http tests disabled checking for danted... no checking for danted... no checking for nghttpx... no checking for caddy... no checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... /usr/bin/grep -E checking if OS is AIX (to define _ALL [command output truncated] compiler is clang... no checking if compiler is GNU C... yes checking compiler version... gcc '1100' (raw: '11') checking if compiler is SunPro C... no checking if compiler is Tiny C... no checking whether build target is a native Windows one... no checking if compiler accepts some basic options... yes configure: compiler options added: -Werror-implicit-function-declaration checking if compiler optimizer assumed setting might be used... yes checking if compiler accepts optimizer enabling options... yes configure: compiler options added: -O2 checking if compiler accepts strict warning options... yes configure: compiler options added: -Wno-system-headers checking if compiler halts on compilation errors... yes checking if compiler halts on negative sized arrays... yes checking if compiler halts on function prototype mismatch... yes checking if compiler supports hiding library internal symbols... yes checking whether build target supports Win32 crypto API... no checking whether to build libcurl and curl in "unity" mode... no checking whether to support http... yes checking whether to support ftp... yes checking whether to support file... yes checking whether to support IPFS... yes checking whether to support ldap... no checking whether to support ldaps... no checking whether to support rtsp... yes checking whether to support proxies... yes checking whether to support dict... yes checking whether to support telnet... yes checking whether to support tftp... yes checking whether to support pop3... yes checking whether to support imap... yes checking whether to support smb... yes checking whether to support smtp... yes checking whether to support gopher... yes checking whether to support mqtt... no checking whether to provide built-in manual... yes checking whether to build documentation... yes checking whether to enable generation of C code... yes checking whether to use libgcc... no checking if X/Open network library is required... no checking for gethostbyname... yes checking whether build target is a native Windows one... (cached) no checking for proto/bsdsocket.h... no checking for connect in libraries... yes checking for sys/types.h... (cached) yes checking for monotonic clock_gettime... yes checking for clock_gettime in libraries... no additional lib required checking if monotonic clock_gettime works... yes checking for sys/types.h... (cached) yes checking for raw monotonic clock_gettime... yes configure: WARNING: zlib disabled checking whether to enable IPv6... yes checking if struct sockaddr_in6 has sin6_scope_id member... yes checking if argv can be written to... yes checking if GSS-API support is requested... no checking whether to enable Windows native SSL/TLS... no checking whether to enable Amiga native SSL/TLS (AmiSSL v5)... no checking for pkg-config... no checking for psl_builtin in -lpsl... no configure: error: libpsl libs and/or directories were not found where specified!
ASSISTANT
The configure script keeps failing due to libpsl. Let me check the configure options available and try a different approach:
compile-bench> cd curl-8.16.0 && ./configure --help | grep -A5 -B5 psl --without-ca-fallback Don't use OpenSSL's built-in CA store
--with-ca-embed=FILE Absolute path to a file containing CA certificates
to embed in the curl tool (example:
/etc/ca-bundle.crt)
--without-ca-embed Don't embed a default CA bundle in the curl tool
--with-libpsl=PATH Where to look for libpsl, PATH points to the LIBPSL
installation; when possible, set the PKG_CONFIG_PATH
environment variable instead of using this option
--without-libpsl disable LIBPSL
--without-libgsasl disable libgsasl support for SCRAM
--with-libssh2=PATH Where to look for libssh2, PATH points to the
libssh2 installation; when possible, set the
PKG_CONFIG_PATH environment variable instead of
using this option
↓ 15 lines
compile-bench> cd curl-8.16.0 && ./configure --help | grep -A5 -B5 psl
--without-ca-fallback Don't use OpenSSL's built-in CA store
--with-ca-embed=FILE Absolute path to a file containing CA certificates
to embed in the curl tool (example:
/etc/ca-bundle.crt)
--without-ca-embed Don't embed a default CA bundle in the curl tool
--with-libpsl=PATH Where to look for libpsl, PATH points to the LIBPSL
installation; when possible, set the PKG_CONFIG_PATH
environment variable instead of using this option
--without-libpsl disable LIBPSL
--without-libgsasl disable libgsasl support for SCRAM
--with-libssh2=PATH Where to look for libssh2, PATH points to the
libssh2 installation; when possible, set the
PKG_CONFIG_PATH environment variable instead of
using this option
ASSISTANT
Perfect! Let me use --without-libpsl instead:
compile-bench> cd curl-8.16.0 && ./configure --prefix=/home/peter/result --without-ssl --without-zlib --without-nghttp2 --without-libidn2 --without-libssh2 --without-gssapi --without-libpsl --without-brotli --without-zstd --disable-ldap --disable-ldaps --disable-manual checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for ar... /usr/bin/ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking how to run the C preprocessor... gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for grep that handles long lines and -e... (cached) /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking if OS is AIX (to define _ALL_SOURCE)... no
checking if _THREAD_SAFE is already defin
[command output truncated]
status: creating tests/configurehelp.pm
config.status: creating tests/certs/Makefile
config.status: creating tests/data/Makefile
config.status: creating tests/server/Makefile
config.status: creating tests/libtest/Makefile
config.status: creating tests/unit/Makefile
config.status: creating tests/tunit/Makefile
config.status: creating tests/http/config.ini
config.status: creating tests/http/Makefile
config.status: creating packages/Makefile
config.status: creating packages/vms/Makefile
config.status: creating libcurl.pc
config.status: creating curl-config
config.status: creating lib/curl_config.h
config.status: executing depfiles commands
config.status: executing libtool commands
configure: Configured to build curl/libcurl:
Host setup: x86_64-pc-linux-gnu
Install prefix: /home/peter/result
Compiler: gcc
CFLAGS: -Werror-implicit-function-declaration -O2 -Wno-system-headers
CFLAGS extras:
CPPFLAGS: -D_GNU_SOURCE
LDFLAGS:
curl-config:
LIBS:
curl version: 8.16.0
SSL: no (--with-{openssl,gnutls,mbedtls,wolfssl,schannel,amissl,rustls} )
SSH: no (--with-{libssh,libssh2})
zlib: no (--with-zlib)
brotli: no (--with-brotli)
zstd: no (--with-zstd)
GSS-API: no (--with-gssapi)
GSASL: no (libgsasl not found)
TLS-SRP: no (--enable-tls-srp)
resolver: POSIX threaded
IPv6: enabled
Unix sockets: enabled
IDN: no (--with-{libidn2,winidn})
Build docs: enabled (--disable-docs)
Build libcurl: Shared=yes, Static=yes
Built-in manual: no (--enable-manual)
--libcurl option: enabled (--disable-libcurl-option)
Verbose errors: enabled (--disable-verbose)
Code coverage: disabled
SSPI: no (--enable-sspi)
ca cert bundle: no
ca cert path:
ca cert embed: no
ca fallback:
LDAP: no (--enable-ldap / --with-ldap-lib / --with-lber-lib)
LDAPS: no (--enable-ldaps)
IPFS/IPNS: enabled
RTSP: enabled
RTMP: no (--with-librtmp)
PSL: no (--with-libpsl)
Alt-svc: enabled (--disable-alt-svc)
Headers API: enabled (--disable-headers-api)
HSTS: no (--enable-hsts)
HTTP1: enabled (internal)
HTTP2: no (--with-nghttp2)
HTTP3: no (--with-ngtcp2 --with-nghttp3, --with-quiche, --with-openssl-quic)
ECH: no (--enable-ech)
HTTPS RR: no (--enable-httpsrr)
SSLS-EXPORT: no (--enable-ssls-export)
Protocols: dict file ftp gopher http imap ipfs ipns mqtt pop3 rtsp smtp telnet tftp ws
Features: alt-svc AsynchDNS IPv6 Largefile threadsafe UnixSockets
↓ 138 lines
compile-bench> cd curl-8.16.0 && ./configure --prefix=/home/peter/result --without-ssl --without-zlib --without-nghttp2 --without-libidn2 --without-libssh2 --without-gssapi --without-libpsl --without-brotli --without-zstd --disable-ldap --disable-ldaps --disable-manual
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for ar... /usr/bin/ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking how to run the C preprocessor... gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for grep that handles long lines and -e... (cached) /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking if OS is AIX (to define _ALL_SOURCE)... no
checking if _THREAD_SAFE is already defin
[command output truncated]
status: creating tests/configurehelp.pm
config.status: creating tests/certs/Makefile
config.status: creating tests/data/Makefile
config.status: creating tests/server/Makefile
config.status: creating tests/libtest/Makefile
config.status: creating tests/unit/Makefile
config.status: creating tests/tunit/Makefile
config.status: creating tests/http/config.ini
config.status: creating tests/http/Makefile
config.status: creating packages/Makefile
config.status: creating packages/vms/Makefile
config.status: creating libcurl.pc
config.status: creating curl-config
config.status: creating lib/curl_config.h
config.status: executing depfiles commands
config.status: executing libtool commands
configure: Configured to build curl/libcurl:
Host setup: x86_64-pc-linux-gnu
Install prefix: /home/peter/result
Compiler: gcc
CFLAGS: -Werror-implicit-function-declaration -O2 -Wno-system-headers
CFLAGS extras:
CPPFLAGS: -D_GNU_SOURCE
LDFLAGS:
curl-config:
LIBS:
curl version: 8.16.0
SSL: no (--with-{openssl,gnutls,mbedtls,wolfssl,schannel,amissl,rustls} )
SSH: no (--with-{libssh,libssh2})
zlib: no (--with-zlib)
brotli: no (--with-brotli)
zstd: no (--with-zstd)
GSS-API: no (--with-gssapi)
GSASL: no (libgsasl not found)
TLS-SRP: no (--enable-tls-srp)
resolver: POSIX threaded
IPv6: enabled
Unix sockets: enabled
IDN: no (--with-{libidn2,winidn})
Build docs: enabled (--disable-docs)
Build libcurl: Shared=yes, Static=yes
Built-in manual: no (--enable-manual)
--libcurl option: enabled (--disable-libcurl-option)
Verbose errors: enabled (--disable-verbose)
Code coverage: disabled
SSPI: no (--enable-sspi)
ca cert bundle: no
ca cert path:
ca cert embed: no
ca fallback:
LDAP: no (--enable-ldap / --with-ldap-lib / --with-lber-lib)
LDAPS: no (--enable-ldaps)
IPFS/IPNS: enabled
RTSP: enabled
RTMP: no (--with-librtmp)
PSL: no (--with-libpsl)
Alt-svc: enabled (--disable-alt-svc)
Headers API: enabled (--disable-headers-api)
HSTS: no (--enable-hsts)
HTTP1: enabled (internal)
HTTP2: no (--with-nghttp2)
HTTP3: no (--with-ngtcp2 --with-nghttp3, --with-quiche, --with-openssl-quic)
ECH: no (--enable-ech)
HTTPS RR: no (--enable-httpsrr)
SSLS-EXPORT: no (--enable-ssls-export)
Protocols: dict file ftp gopher http imap ipfs ipns mqtt pop3 rtsp smtp telnet tftp ws
Features: alt-svc AsynchDNS IPv6 Largefile threadsafe UnixSockets
ASSISTANT
Great! The configure was successful. Now let's compile curl:
compile-bench> cd /home/peter/curl-8.16.0 && make -j$(nproc) Making all in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make all-am
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
CC libcurl_la-altsvc.lo
CC libcurl_la-amigaos.lo
CC libcurl_la-asyn-ares.lo
CC libcurl_la-asyn-base.lo
CC libcurl_la-asyn-thrdd.lo
CC libcurl_la-bufq.lo
CC libcurl_la-bufref.lo
CC libcurl_la-cf-h1-proxy.lo
CC libcurl_la-cf-h2-proxy.lo
CC libcurl_la-cf-haproxy.lo
CC libcurl_la-cf-https-connect.lo
CC libcurl_la-cf-ip-happy.lo
CC libcurl_la-cf-socket.lo
CC libcurl_la-cfilters.lo
CC libcurl_la-conncache.lo
CC libcurl_la-connect.lo
CC libcurl_la-content_encoding.lo
CC libcurl_la-cookie.lo
CC libcurl_la-cshutdn.lo
CC libcurl_la-curl_addrinfo.lo
CC libcurl_la-curl_des.lo
CC libcurl_la-curl_endian.lo
CC libcurl_la-curl_fnmatch.lo
CC libcurl_la-curl_get_line.lo
CC libcurl_la-curl_gethostname.lo
CC libcurl_la-curl_gssapi.lo
CC libcurl_la-curl_memrchr.lo
CC libcurl_la-curl_ntlm_core.lo
CC libcurl_la-curl_range.lo
CC libcurl_la-curl_rtmp.lo
CC libcurl_la-curl_sasl.lo
CC libcurl_la-curl_sha512_256.lo
CC libcurl_la-curl_sspi.lo
CC libcurl_la-curl_threads.lo
CC libcurl_la-curl_trc.lo
CC libcurl_la-cw-out.lo
CC libcurl_la-cw-pause.lo
CC libcurl_la-dict.lo
CC libcurl_la-doh.lo
CC libcurl_la-dynhds.lo
CC libcurl_la-easy.lo
CC libcurl_la-easygetopt.lo
CC libcurl_la-easyoptions.lo
CC libcurl_la-escape.lo
CC libcurl_la-fake_addrinfo.lo
CC libcurl_la-file.lo
CC libcurl_la-fileinfo.lo
CC libcurl_la-fopen.lo
CC libcurl_la-formdata.lo
CC libcurl_la-ftp.lo
CC libcurl_la-ftplistparser.lo
CC libcurl_la-getenv.lo
CC libcurl_la-getinfo.lo
CC libcurl_la-gopher.lo
CC libcurl_la-hash.lo
CC libcurl_la-headers.lo
CC libcurl_la-hmac.lo
CC libcurl_la-hostip.lo
CC libcurl_la-hostip4.lo
CC libcurl_la-hostip6.lo
CC libcurl_la-hsts.lo
CC libcurl_la-http.lo
CC libcurl_la-http1.lo
CC libcurl_la-http2.lo
CC libcurl_la-http_aws_sigv4.lo
CC libcurl_la-http_chunks.lo
[command output truncated]
CC ../lib/curlx/curl-version_win32.o
CC ../lib/curlx/curl-wait.o
CC ../lib/curlx/curl-warnless.o
CC curlinfo.o
CC libcurltool_la-config2setopts.lo
CC libcurltool_la-slist_wc.lo
CC libcurltool_la-terminal.lo
CC libcurltool_la-tool_bname.lo
CC libcurltool_la-tool_cb_dbg.lo
CC libcurltool_la-tool_cb_hdr.lo
CC libcurltool_la-tool_cb_prg.lo
CC libcurltool_la-tool_cb_rea.lo
CC libcurltool_la-tool_cb_see.lo
CC libcurltool_la-tool_cb_soc.lo
CC libcurltool_la-tool_cb_wrt.lo
CC libcurltool_la-tool_cfgable.lo
CC libcurltool_la-tool_dirhie.lo
CC libcurltool_la-tool_doswin.lo
CC libcurltool_la-tool_easysrc.lo
CC libcurltool_la-tool_filetime.lo
CC libcurltool_la-tool_findfile.lo
CC libcurltool_la-tool_formparse.lo
CC libcurltool_la-tool_getparam.lo
CC libcurltool_la-tool_getpass.lo
CC libcurltool_la-tool_help.lo
CC libcurltool_la-tool_helpers.lo
CC libcurltool_la-tool_ipfs.lo
CC libcurltool_la-tool_libinfo.lo
CC libcurltool_la-tool_listhelp.lo
CC libcurltool_la-tool_main.lo
CC libcurltool_la-tool_msgs.lo
CC libcurltool_la-tool_operate.lo
CC libcurltool_la-tool_operhlp.lo
CC libcurltool_la-tool_paramhlp.lo
CC libcurltool_la-tool_parsecfg.lo
CC libcurltool_la-tool_progress.lo
CC libcurltool_la-tool_setopt.lo
CC libcurltool_la-tool_ssls.lo
CC libcurltool_la-tool_stderr.lo
CC libcurltool_la-tool_strdup.lo
CC libcurltool_la-tool_urlglob.lo
CC libcurltool_la-tool_util.lo
CC libcurltool_la-tool_vms.lo
CC libcurltool_la-tool_writeout.lo
CC libcurltool_la-tool_writeout_json.lo
CC libcurltool_la-tool_xattr.lo
CC libcurltool_la-var.lo
CC ../lib/curlx/libcurltool_la-base64.lo
CC ../lib/curlx/libcurltool_la-multibyte.lo
CC ../lib/curlx/libcurltool_la-dynbuf.lo
CC ../lib/curlx/libcurltool_la-nonblock.lo
CC ../lib/curlx/libcurltool_la-strparse.lo
CC ../lib/curlx/libcurltool_la-timediff.lo
CC ../lib/curlx/libcurltool_la-timeval.lo
CC ../lib/curlx/libcurltool_la-version_win32.lo
CC ../lib/curlx/libcurltool_la-wait.lo
CC ../lib/curlx/libcurltool_la-warnless.lo
CC curl-tool_ca_embed.o
CCLD curlinfo
CCLD curl
CCLD libcurltool.la
make[1]: Leaving directory '/home/peter/curl-8.16.0/src'
Making all in scripts
make[1]: Entering directory '/home/peter/curl-8.16.0/scripts'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/home/peter/curl-8.16.0/scripts'
make[1]: Entering directory '/home/peter/curl-8.16.0'
make[1]: Nothing to be done for 'all-am'.
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 141 lines
compile-bench> cd /home/peter/curl-8.16.0 && make -j$(nproc)
Making all in lib make[1]: Entering directory '/home/peter/curl-8.16.0/lib' make all-am make[2]: Entering directory '/home/peter/curl-8.16.0/lib' CC libcurl_la-altsvc.lo CC libcurl_la-amigaos.lo CC libcurl_la-asyn-ares.lo CC libcurl_la-asyn-base.lo CC libcurl_la-asyn-thrdd.lo CC libcurl_la-bufq.lo CC libcurl_la-bufref.lo CC libcurl_la-cf-h1-proxy.lo CC libcurl_la-cf-h2-proxy.lo CC libcurl_la-cf-haproxy.lo CC libcurl_la-cf-https-connect.lo CC libcurl_la-cf-ip-happy.lo CC libcurl_la-cf-socket.lo CC libcurl_la-cfilters.lo CC libcurl_la-conncache.lo CC libcurl_la-connect.lo CC libcurl_la-content_encoding.lo CC libcurl_la-cookie.lo CC libcurl_la-cshutdn.lo CC libcurl_la-curl_addrinfo.lo CC libcurl_la-curl_des.lo CC libcurl_la-curl_endian.lo CC libcurl_la-curl_fnmatch.lo CC libcurl_la-curl_get_line.lo CC libcurl_la-curl_gethostname.lo CC libcurl_la-curl_gssapi.lo CC libcurl_la-curl_memrchr.lo CC libcurl_la-curl_ntlm_core.lo CC libcurl_la-curl_range.lo CC libcurl_la-curl_rtmp.lo CC libcurl_la-curl_sasl.lo CC libcurl_la-curl_sha512_256.lo CC libcurl_la-curl_sspi.lo CC libcurl_la-curl_threads.lo CC libcurl_la-curl_trc.lo CC libcurl_la-cw-out.lo CC libcurl_la-cw-pause.lo CC libcurl_la-dict.lo CC libcurl_la-doh.lo CC libcurl_la-dynhds.lo CC libcurl_la-easy.lo CC libcurl_la-easygetopt.lo CC libcurl_la-easyoptions.lo CC libcurl_la-escape.lo CC libcurl_la-fake_addrinfo.lo CC libcurl_la-file.lo CC libcurl_la-fileinfo.lo CC libcurl_la-fopen.lo CC libcurl_la-formdata.lo CC libcurl_la-ftp.lo CC libcurl_la-ftplistparser.lo CC libcurl_la-getenv.lo CC libcurl_la-getinfo.lo CC libcurl_la-gopher.lo CC libcurl_la-hash.lo CC libcurl_la-headers.lo CC libcurl_la-hmac.lo CC libcurl_la-hostip.lo CC libcurl_la-hostip4.lo CC libcurl_la-hostip6.lo CC libcurl_la-hsts.lo CC libcurl_la-http.lo CC libcurl_la-http1.lo CC libcurl_la-http2.lo CC libcurl_la-http_aws_sigv4.lo CC libcurl_la-http_chunks.lo [command output truncated] CC ../lib/curlx/curl-version_win32.o CC ../lib/curlx/curl-wait.o CC ../lib/curlx/curl-warnless.o CC curlinfo.o CC libcurltool_la-config2setopts.lo CC libcurltool_la-slist_wc.lo CC libcurltool_la-terminal.lo CC libcurltool_la-tool_bname.lo CC libcurltool_la-tool_cb_dbg.lo CC libcurltool_la-tool_cb_hdr.lo CC libcurltool_la-tool_cb_prg.lo CC libcurltool_la-tool_cb_rea.lo CC libcurltool_la-tool_cb_see.lo CC libcurltool_la-tool_cb_soc.lo CC libcurltool_la-tool_cb_wrt.lo CC libcurltool_la-tool_cfgable.lo CC libcurltool_la-tool_dirhie.lo CC libcurltool_la-tool_doswin.lo CC libcurltool_la-tool_easysrc.lo CC libcurltool_la-tool_filetime.lo CC libcurltool_la-tool_findfile.lo CC libcurltool_la-tool_formparse.lo CC libcurltool_la-tool_getparam.lo CC libcurltool_la-tool_getpass.lo CC libcurltool_la-tool_help.lo CC libcurltool_la-tool_helpers.lo CC libcurltool_la-tool_ipfs.lo CC libcurltool_la-tool_libinfo.lo CC libcurltool_la-tool_listhelp.lo CC libcurltool_la-tool_main.lo CC libcurltool_la-tool_msgs.lo CC libcurltool_la-tool_operate.lo CC libcurltool_la-tool_operhlp.lo CC libcurltool_la-tool_paramhlp.lo CC libcurltool_la-tool_parsecfg.lo CC libcurltool_la-tool_progress.lo CC libcurltool_la-tool_setopt.lo CC libcurltool_la-tool_ssls.lo CC libcurltool_la-tool_stderr.lo CC libcurltool_la-tool_strdup.lo CC libcurltool_la-tool_urlglob.lo CC libcurltool_la-tool_util.lo CC libcurltool_la-tool_vms.lo CC libcurltool_la-tool_writeout.lo CC libcurltool_la-tool_writeout_json.lo CC libcurltool_la-tool_xattr.lo CC libcurltool_la-var.lo CC ../lib/curlx/libcurltool_la-base64.lo CC ../lib/curlx/libcurltool_la-multibyte.lo CC ../lib/curlx/libcurltool_la-dynbuf.lo CC ../lib/curlx/libcurltool_la-nonblock.lo CC ../lib/curlx/libcurltool_la-strparse.lo CC ../lib/curlx/libcurltool_la-timediff.lo CC ../lib/curlx/libcurltool_la-timeval.lo CC ../lib/curlx/libcurltool_la-version_win32.lo CC ../lib/curlx/libcurltool_la-wait.lo CC ../lib/curlx/libcurltool_la-warnless.lo CC curl-tool_ca_embed.o CCLD curlinfo CCLD curl CCLD libcurltool.la make[1]: Leaving directory '/home/peter/curl-8.16.0/src' Making all in scripts make[1]: Entering directory '/home/peter/curl-8.16.0/scripts' make[1]: Nothing to be done for 'all'. make[1]: Leaving directory '/home/peter/curl-8.16.0/scripts' make[1]: Entering directory '/home/peter/curl-8.16.0' make[1]: Nothing to be done for 'all-am'. make[1]: Leaving directory '/home/peter/curl-8.16.0'
ASSISTANT
The compilation was successful! Now let's install curl to the result directory:
compile-bench> cd /home/peter/curl-8.16.0 && make install Making install in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
/usr/bin/mkdir -p '/home/peter/result/lib'
/bin/bash ../libtool --mode=install /usr/bin/install -c libcurl.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libcurl.so.4.8.0 /home/peter/result/lib/libcurl.so.4.8.0
libtool: install: (cd /home/peter/result/lib && { ln -s -f libcurl.so.4.8.0 libcurl.so.4 || { rm -f libcurl.so.4 && ln -s libcurl.so.4.8.0 libcurl.so.4; }; })
libtool: install: (cd /home/peter/result/lib && { ln -s -f libcurl.so.4.8.0 libcurl.so || { rm -f libcurl.so && ln -s libcurl.so.4.8.0 libcurl.so; }; })
libtool: install: /usr/bin/install -c .libs/libcurl.lai /home/peter/result/lib/libcurl.la
libtool: install: /usr/bin/install -c .libs/libcurl.a /home/peter/result/lib/libcurl.a
libtool: install: chmod 644 /home/peter/result/lib/libcurl.a
libtool: install: ranlib /home/peter/result/lib/libcurl.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
/home/peter/result/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/peter/curl-8.16.0/lib'
make[1]: Leaving directory '/home/peter/curl-8.16.0/lib'
Making install in docs
make[1]: Entering directory '/home/peter/curl-8.16.0/docs'
Making install in .
make[2]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/home/peter/result/share/man/man1'
/usr/bin/install -c -m 644 curl-config.1 wcurl.1 '/home/peter/result/share/man/man1'
make[3]: Leaving directory '/home/peter/curl-8.16.0/docs'
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs'
Making install in cmdline-opts
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/home/peter/result/share/man/man1'
/u
[command output truncated]
ng directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/home/peter/result/share/aclocal'
/usr/bin/install -c -m 644 libcurl.m4 '/home/peter/result/share/aclocal'
/usr/bin/mkdir -p '/home/peter/result/share/man/man3'
/usr/bin/install -c -m 644 curl_easy_cleanup.3 curl_easy_duphandle.3 curl_easy_escape.3 curl_easy_getinfo.3 curl_easy_header.3 curl_easy_init.3 curl_easy_nextheader.3 curl_easy_option_by_id.3 curl_easy_option_by_name.3 curl_easy_option_next.3 curl_easy_pause.3 curl_easy_perform.3 curl_easy_recv.3 curl_easy_reset.3 curl_easy_send.3 curl_easy_setopt.3 curl_easy_ssls_export.3 curl_easy_ssls_import.3 curl_easy_strerror.3 curl_easy_unescape.3 curl_easy_upkeep.3 curl_escape.3 curl_formadd.3 curl_formfree.3 curl_formget.3 curl_free.3 curl_getdate.3 curl_getenv.3 curl_global_cleanup.3 curl_global_init.3 curl_global_init_mem.3 curl_global_sslset.3 curl_global_trace.3 curl_mime_addpart.3 curl_mime_data.3 curl_mime_data_cb.3 curl_mime_encoder.3 curl_mime_filedata.3 curl_mime_filename.3 curl_mime_free.3 '/home/peter/result/share/man/man3'
/usr/bin/install -c -m 644 curl_mime_headers.3 curl_mime_init.3 curl_mime_name.3 curl_mime_subparts.3 curl_mime_type.3 curl_mprintf.3 curl_multi_add_handle.3 curl_multi_assign.3 curl_multi_cleanup.3 curl_multi_fdset.3 curl_multi_get_handles.3 curl_multi_get_offt.3 curl_multi_info_read.3 curl_multi_init.3 curl_multi_perform.3 curl_multi_poll.3 curl_multi_remove_handle.3 curl_multi_setopt.3 curl_multi_socket.3 curl_multi_socket_action.3 curl_multi_socket_all.3 curl_multi_strerror.3 curl_multi_timeout.3 curl_multi_wait.3 curl_multi_waitfds.3 curl_multi_wakeup.3 curl_pushheader_byname.3 curl_pushheader_bynum.3 curl_share_cleanup.3 curl_share_init.3 curl_share_setopt.3 curl_share_strerror.3 curl_slist_append.3 curl_slist_free_all.3 curl_strequal.3 curl_strnequal.3 curl_unescape.3 curl_url.3 curl_url_cleanup.3 curl_url_dup.3 '/home/peter/result/share/man/man3'
/usr/bin/install -c -m 644 curl_url_get.3 curl_url_set.3 curl_url_strerror.3 curl_version.3 curl_version_info.3 curl_ws_meta.3 curl_ws_recv.3 curl_ws_send.3 curl_ws_start_frame.3 libcurl-easy.3 libcurl-env-dbg.3 libcurl-env.3 libcurl-errors.3 libcurl-multi.3 libcurl-security.3 libcurl-share.3 libcurl-symbols.3 libcurl-thread.3 libcurl-tutorial.3 libcurl-url.3 libcurl-ws.3 libcurl.3 '/home/peter/result/share/man/man3'
make[6]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[4]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[3]: Leaving directory '/home/peter/curl-8.16.0'
make[2]: Leaving directory '/home/peter/curl-8.16.0'
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 69 lines
compile-bench> cd /home/peter/curl-8.16.0 && make install
Making install in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
/usr/bin/mkdir -p '/home/peter/result/lib'
/bin/bash ../libtool --mode=install /usr/bin/install -c libcurl.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libcurl.so.4.8.0 /home/peter/result/lib/libcurl.so.4.8.0
libtool: install: (cd /home/peter/result/lib && { ln -s -f libcurl.so.4.8.0 libcurl.so.4 || { rm -f libcurl.so.4 && ln -s libcurl.so.4.8.0 libcurl.so.4; }; })
libtool: install: (cd /home/peter/result/lib && { ln -s -f libcurl.so.4.8.0 libcurl.so || { rm -f libcurl.so && ln -s libcurl.so.4.8.0 libcurl.so; }; })
libtool: install: /usr/bin/install -c .libs/libcurl.lai /home/peter/result/lib/libcurl.la
libtool: install: /usr/bin/install -c .libs/libcurl.a /home/peter/result/lib/libcurl.a
libtool: install: chmod 644 /home/peter/result/lib/libcurl.a
libtool: install: ranlib /home/peter/result/lib/libcurl.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
/home/peter/result/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/peter/curl-8.16.0/lib'
make[1]: Leaving directory '/home/peter/curl-8.16.0/lib'
Making install in docs
make[1]: Entering directory '/home/peter/curl-8.16.0/docs'
Making install in .
make[2]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/home/peter/result/share/man/man1'
/usr/bin/install -c -m 644 curl-config.1 wcurl.1 '/home/peter/result/share/man/man1'
make[3]: Leaving directory '/home/peter/curl-8.16.0/docs'
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs'
Making install in cmdline-opts
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/home/peter/result/share/man/man1'
/u
[command output truncated]
ng directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/home/peter/result/share/aclocal'
/usr/bin/install -c -m 644 libcurl.m4 '/home/peter/result/share/aclocal'
/usr/bin/mkdir -p '/home/peter/result/share/man/man3'
/usr/bin/install -c -m 644 curl_easy_cleanup.3 curl_easy_duphandle.3 curl_easy_escape.3 curl_easy_getinfo.3 curl_easy_header.3 curl_easy_init.3 curl_easy_nextheader.3 curl_easy_option_by_id.3 curl_easy_option_by_name.3 curl_easy_option_next.3 curl_easy_pause.3 curl_easy_perform.3 curl_easy_recv.3 curl_easy_reset.3 curl_easy_send.3 curl_easy_setopt.3 curl_easy_ssls_export.3 curl_easy_ssls_import.3 curl_easy_strerror.3 curl_easy_unescape.3 curl_easy_upkeep.3 curl_escape.3 curl_formadd.3 curl_formfree.3 curl_formget.3 curl_free.3 curl_getdate.3 curl_getenv.3 curl_global_cleanup.3 curl_global_init.3 curl_global_init_mem.3 curl_global_sslset.3 curl_global_trace.3 curl_mime_addpart.3 curl_mime_data.3 curl_mime_data_cb.3 curl_mime_encoder.3 curl_mime_filedata.3 curl_mime_filename.3 curl_mime_free.3 '/home/peter/result/share/man/man3'
/usr/bin/install -c -m 644 curl_mime_headers.3 curl_mime_init.3 curl_mime_name.3 curl_mime_subparts.3 curl_mime_type.3 curl_mprintf.3 curl_multi_add_handle.3 curl_multi_assign.3 curl_multi_cleanup.3 curl_multi_fdset.3 curl_multi_get_handles.3 curl_multi_get_offt.3 curl_multi_info_read.3 curl_multi_init.3 curl_multi_perform.3 curl_multi_poll.3 curl_multi_remove_handle.3 curl_multi_setopt.3 curl_multi_socket.3 curl_multi_socket_action.3 curl_multi_socket_all.3 curl_multi_strerror.3 curl_multi_timeout.3 curl_multi_wait.3 curl_multi_waitfds.3 curl_multi_wakeup.3 curl_pushheader_byname.3 curl_pushheader_bynum.3 curl_share_cleanup.3 curl_share_init.3 curl_share_setopt.3 curl_share_strerror.3 curl_slist_append.3 curl_slist_free_all.3 curl_strequal.3 curl_strnequal.3 curl_unescape.3 curl_url.3 curl_url_cleanup.3 curl_url_dup.3 '/home/peter/result/share/man/man3'
/usr/bin/install -c -m 644 curl_url_get.3 curl_url_set.3 curl_url_strerror.3 curl_version.3 curl_version_info.3 curl_ws_meta.3 curl_ws_recv.3 curl_ws_send.3 curl_ws_start_frame.3 libcurl-easy.3 libcurl-env-dbg.3 libcurl-env.3 libcurl-errors.3 libcurl-multi.3 libcurl-security.3 libcurl-share.3 libcurl-symbols.3 libcurl-thread.3 libcurl-tutorial.3 libcurl-url.3 libcurl-ws.3 libcurl.3 '/home/peter/result/share/man/man3'
make[6]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[4]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[3]: Leaving directory '/home/peter/curl-8.16.0'
make[2]: Leaving directory '/home/peter/curl-8.16.0'
make[1]: Leaving directory '/home/peter/curl-8.16.0'
ASSISTANT
Great! The installation was successful. Now let's check what was installed and create the symlink:
compile-bench> ls -la /home/peter/result/ total 24
drwxr-xr-x 6 peter peter 4096 Sep 23 20:13 .
drwxr-x--- 1 peter peter 4096 Sep 23 20:13 ..
drwxr-xr-x 2 peter peter 4096 Sep 23 20:13 bin
drwxr-xr-x 3 peter peter 4096 Sep 23 20:13 include
drwxr-xr-x 3 peter peter 4096 Sep 23 20:13 lib
drwxr-xr-x 4 peter peter 4096 Sep 23 20:13 share
↓ 8 lines
compile-bench> ls -la /home/peter/result/
total 24 drwxr-xr-x 6 peter peter 4096 Sep 23 20:13 . drwxr-x--- 1 peter peter 4096 Sep 23 20:13 .. drwxr-xr-x 2 peter peter 4096 Sep 23 20:13 bin drwxr-xr-x 3 peter peter 4096 Sep 23 20:13 include drwxr-xr-x 3 peter peter 4096 Sep 23 20:13 lib drwxr-xr-x 4 peter peter 4096 Sep 23 20:13 share
ASSISTANT
Let's check the bin directory to see the curl binary:
compile-bench> ls -la /home/peter/result/bin/ total 288
drwxr-xr-x 2 peter peter 4096 Sep 23 20:13 .
drwxr-xr-x 6 peter peter 4096 Sep 23 20:13 ..
-rwxr-xr-x 1 peter peter 264160 Sep 23 20:13 curl
-rwxr-xr-x 1 peter peter 4935 Sep 23 20:13 curl-config
-rwxr-xr-x 1 peter peter 10622 Sep 23 20:13 wcurl
↓ 7 lines
compile-bench> ls -la /home/peter/result/bin/
total 288 drwxr-xr-x 2 peter peter 4096 Sep 23 20:13 . drwxr-xr-x 6 peter peter 4096 Sep 23 20:13 .. -rwxr-xr-x 1 peter peter 264160 Sep 23 20:13 curl -rwxr-xr-x 1 peter peter 4935 Sep 23 20:13 curl-config -rwxr-xr-x 1 peter peter 10622 Sep 23 20:13 wcurl
ASSISTANT
Perfect! Now let's create the symlink from /home/peter/result/curl to the actual binary path:
compile-bench> ln -sf /home/peter/result/bin/curl /home/peter/result/curl
[empty output]
ASSISTANT
Let's verify that the symlink was created correctly:
compile-bench> ls -la /home/peter/result/curl
lrwxrwxrwx 1 peter peter 27 Sep 23 20:13 /home/peter/result/curl -> /home/peter/result/bin/curl
ASSISTANT
Excellent! Let's verify that the curl binary works:
compile-bench> /home/peter/result/curl --version curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0
Release-Date: 2025-09-10
Protocols: dict file ftp gopher http imap ipfs ipns mqtt pop3 rtsp smtp telnet tftp ws
Features: alt-svc AsynchDNS IPv6 Largefile threadsafe UnixSockets
↓ 5 lines
compile-bench> /home/peter/result/curl --version
curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0 Release-Date: 2025-09-10 Protocols: dict file ftp gopher http imap ipfs ipns mqtt pop3 rtsp smtp telnet tftp ws Features: alt-svc AsynchDNS IPv6 Largefile threadsafe UnixSockets
ASSISTANT
Perfect! Let's also verify the libcurl installation:
compile-bench> ls -la /home/peter/result/lib/ total 2164
drwxr-xr-x 3 peter peter 4096 Sep 23 20:13 .
drwxr-xr-x 6 peter peter 4096 Sep 23 20:13 ..
-rw-r--r-- 1 peter peter 1448222 Sep 23 20:13 libcurl.a
-rwxr-xr-x 1 peter peter 948 Sep 23 20:13 libcurl.la
lrwxrwxrwx 1 peter peter 16 Sep 23 20:13 libcurl.so -> libcurl.so.4.8.0
lrwxrwxrwx 1 peter peter 16 Sep 23 20:13 libcurl.so.4 -> libcurl.so.4.8.0
-rwxr-xr-x 1 peter peter 745560 Sep 23 20:13 libcurl.so.4.8.0
drwxr-xr-x 2 peter peter 4096 Sep 23 20:13 pkgconfig
↓ 10 lines
compile-bench> ls -la /home/peter/result/lib/
total 2164 drwxr-xr-x 3 peter peter 4096 Sep 23 20:13 . drwxr-xr-x 6 peter peter 4096 Sep 23 20:13 .. -rw-r--r-- 1 peter peter 1448222 Sep 23 20:13 libcurl.a -rwxr-xr-x 1 peter peter 948 Sep 23 20:13 libcurl.la lrwxrwxrwx 1 peter peter 16 Sep 23 20:13 libcurl.so -> libcurl.so.4.8.0 lrwxrwxrwx 1 peter peter 16 Sep 23 20:13 libcurl.so.4 -> libcurl.so.4.8.0 -rwxr-xr-x 1 peter peter 745560 Sep 23 20:13 libcurl.so.4.8.0 drwxr-xr-x 2 peter peter 4096 Sep 23 20:13 pkgconfig
ASSISTANT
Let's do a final verification that everything is working correctly:
compile-bench> ls -la /home/peter/result && echo "---" && /home/peter/result/curl --version total 24
drwxr-xr-x 6 peter peter 4096 Sep 23 20:13 .
drwxr-x--- 1 peter peter 4096 Sep 23 20:13 ..
drwxr-xr-x 2 peter peter 4096 Sep 23 20:13 bin
lrwxrwxrwx 1 peter peter 27 Sep 23 20:13 curl -> /home/peter/result/bin/curl
drwxr-xr-x 3 peter peter 4096 Sep 23 20:13 include
drwxr-xr-x 3 peter peter 4096 Sep 23 20:13 lib
drwxr-xr-x 4 peter peter 4096 Sep 23 20:13 share
---
curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0
Release-Date: 2025-09-10
Protocols: dict file ftp gopher http imap ipfs ipns mqtt pop3 rtsp smtp telnet tftp ws
Features: alt-svc AsynchDNS IPv6 Largefile threadsafe UnixSockets
↓ 14 lines
compile-bench> ls -la /home/peter/result && echo "---" && /home/peter/result/curl --version
total 24 drwxr-xr-x 6 peter peter 4096 Sep 23 20:13 . drwxr-x--- 1 peter peter 4096 Sep 23 20:13 .. drwxr-xr-x 2 peter peter 4096 Sep 23 20:13 bin lrwxrwxrwx 1 peter peter 27 Sep 23 20:13 curl -> /home/peter/result/bin/curl drwxr-xr-x 3 peter peter 4096 Sep 23 20:13 include drwxr-xr-x 3 peter peter 4096 Sep 23 20:13 lib drwxr-xr-x 4 peter peter 4096 Sep 23 20:13 share --- curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0 Release-Date: 2025-09-10 Protocols: dict file ftp gopher http imap ipfs ipns mqtt pop3 rtsp smtp telnet tftp ws Features: alt-svc AsynchDNS IPv6 Largefile threadsafe UnixSockets
ASSISTANT
## Summary
I have successfully compiled and installed curl v8.16.0 to /home/peter/result. Here's what was accomplished:
1. Extracted the source code from /home/peter/curl.tar.gz
2. Configured the build with minimal dependencies using options like --without-ssl, --without-zlib, --without-libpsl, etc. to ensure it builds even if third-party dependencies are not available
3. Compiled curl successfully using make -j$(nproc)
4. Installed to destination /home/peter/result using make install
5. Created the symlink /home/peter/result/curl pointing to /home/peter/result/bin/curl
The installation includes:
- curl binary at /home/peter/result/bin/curl
- Symlink /home/peter/result/curl pointing to the actual binary
- Shared library libcurl.so.4.8.0 and development libraries
- Header files in /home/peter/result/include/
- Documentation in /home/peter/result/share/
The compiled curl version 8.16.0 supports basic protocols (HTTP, FTP, etc.) but is built without SSL/TLS support and other optional features due to the minimal dependency configuration. The symlink /home/peter/result/curl correctly points to the actual binary and the installation is functional as verified by the --version command.
Task finished successfully, all checks passed!
Checks passed:
curl binary exists
curl version matches expected
curl downloaded the expected local file content