<- Ranking
Summary
Task
jq-static-musl
Model
deepseek-v3.1-terminus logo
deepseek-v3.1-terminus
Status
Success
Performance
Cost$0.265
Total elapsed time4m15s
LLM inference time3m30s
Command execution time45s
Commands executed44
All details >
Attempt ID rqlz1a80zxnf6 Attempt group run-23-09-21-48
Revision ad46875d9374 AWS Instance m8i.2xlarge
Start time 2025-09-23T20:14:35.743Z End time 2025-09-23T20:18:51.377Z
Task jq-static-musl Environment ubuntu-22.04-amd64
Model deepseek-v3.1-terminus logo deepseek-v3.1-terminus OpenRouter slug deepseek/deepseek-v3.1-terminus
Temperature 1 Explicit prompt caching false
User msg after tool call false Max tool calls 100
Total timeout seconds 1200 Single command timeout 600
Cost $0.265 Duration 4m15s
LLM inference time 3m30s Command execution time 45s
Final context tokens 33,775 Total output tokens 3,172
Output reasoning tokens 0 Messages 91
Assistant messages 45 User messages 1
System messages 1 Commands executed 44
Download full attempt result JSON
Task
Task: jq-static-musl

jq 1.8.1 is a command-line JSON utility for viewing and transforming JSON.
Project link: github.com/jqlang/jq

Task:
Compile and install statically-linked jq to a specific location. The binary must use musl C library (not the standard glibc).

Difficulties:
musl toolchain setup, avoiding glibc-only assumptions.

Environment:
Ubuntu 22.04 on amd64, with internet access.

View task page
Execution log
SYSTEM

You are a package-building specialist operating a Ubuntu 22.04 bash shell via one tool: run_terminal_cmd.
The current working directory of every run_terminal_cmd is /home/peter.
Execution rules:
- Always pass non-interactive flags for any command that could prompt (e.g., -y, --yes, DEBIAN_FRONTEND=noninteractive).
- Don't include any newlines in the command.
- You can use sudo.
If you encounter any errors or issues while doing the user's request, you must fix them and continue the task.
At the end verify you did the user request correctly.

USER

You are given jq v1.8.1 source code at /home/peter/jq.tar.gz. Please compile the jq package using musl as the C standard library and install it to /home/peter/result. Create a symlink from /home/peter/result/jq to the compiled jq binary. The binary must be statically linked and must use musl (not glibc).

ASSISTANT

I'll help you compile jq with musl and create the static binary. Let's start by extracting the source code and setting up the environment.

First, let's extract the jq source code:

compile-bench> tar -xzf /home/peter/jq.tar.gz
[empty output]
ASSISTANT

Let's check what was extracted:

compile-bench> ls -la
total 2008
drwxr-x--- 1 peter peter    4096 Sep 23 20:14 .
drwxr-xr-x 1 root  root     4096 Sep 15 11:21 ..
-rw-r--r-- 1 peter peter     220 Jan  6  2022 .bash_logout
-rw-r--r-- 1 peter peter    3771 Jan  6  2022 .bashrc
-rw-r--r-- 1 peter peter     807 Jan  6  2022 .profile
drwxr-xr-x 9 peter peter    4096 Jul  1 11:40 jq-1.8.1
-rw-r--r-- 1 peter peter 2026798 Sep 23 20:14 jq.tar.gz
↓ 9 lines
ASSISTANT

Good! The source was extracted. Now, let's install the necessary build tools and musl:

compile-bench> sudo apt-get update && sudo apt-get install -y build-essential autoconf automake libtool pkg-config git musl-tools
0% [Working]
            
Hit:1 http://archive.ubuntu.com/ubuntu jammy InRelease

0% [Waiting for headers] [Connecting to security.ubuntu.com (185.125.190.81)]
                                                                             
Get:2 http://archive.ubuntu.com/ubuntu jammy-updates InRelease [128 kB]

0% [2 InRelease 12.7 kB/128 kB 10%] [Connecting to security.ubuntu.com (185.125
                                                                               
0% [2 InRelease 21.4 kB/128 kB 17%] [Waiting for headers]
                                                         
0% [Waiting for headers] [Waiting for headers]
                                              
Get:3 http://security.ubuntu.com/ubuntu jammy-security InRelease [129 kB]

0% [Waiting for headers] [3 InRelease 12.7 kB/129 kB 10%]
                                                         
Get:4 http://archive.ubuntu.com/ubuntu jammy-backports InRelease [127 kB]

0% [4 InRelease 5484 B/127 kB 4%] [3 InRelease 14.2 kB/129 kB 11%]
0% [4 InRelease 116 kB/127 kB 91%] [3 InRelease 14.2 kB/129 kB 11%]
                                                                   
0% [3 InRelease 14.2 kB/129 kB 11%]
                                   
Get:5 http://archive.ubuntu.com/ubuntu jammy-updates/restricted amd64 Packages [5779 kB]

0% [5 Packages 6999 B/5779 kB 0%] [3 InRelease 14.2 kB/129 kB 11%]
0% [5 Packages 132 kB/5779 kB 2%] [3 InRelease 14.2 kB/129 kB 11%]
                                                                  
0% [Waiting for headers] [3 InRelease 48.9 kB/129 kB 38%]
                                                         
Get:6 http://archive.ubuntu.com/ubuntu jammy-updates/universe amd64 Packages [1577 kB]

0% [6 Packages 802 kB/1577 kB 51%] [3 InRelease 48.9 kB/129 kB 38%]
0% [5 Packages store 0 B] [6 Packages 868 kB/1577 kB 55%] [3 InRelease 48.9 kB/
0% [5 Packages store 0 B] [Waiting for headers] [3 InRelease 51.8 kB/129 kB 40%
                                                                               
Get:7 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 Packages [3681 kB]

0% [5 Packages store 0 B] [7 Packages 36.9 kB/3681 kB 1%] [3 InRelease 51.8 kB/
                                                                               
Get:8 http://archive.ubuntu.com/ubuntu jammy-updates/multiverse amd64 Packages [69.1 kB]

0% [5 Packages store 0 B] [8 Packages 69.1 kB/69.1 kB 100%] [3 InRelease 63.4 k
                                                                               
0% [5 Packages store 0 B] [3 InRelease 63.4 kB/129 kB 49%]
                                                          
0% [5 Packages store 0 B]
                         
0% [Working]
0% [6 Packages store 0 B]
58% [6 Packages store 0 B]
                          
59% [Waiting for headers]
59% [7 Packages store 0 B] [Waiting for headers]
                                                
Get:9 http://security.ubuntu.com/ubuntu jammy-security/restricted amd64 Packages [552
[command output truncated]
amd64 (1:1.0.9-1build5) ...
Setting up xdg-user-dirs (0.17-2ubuntu4) ...
Setting up libglib2.0-0:amd64 (2.72.4-0ubuntu2.6) ...
No schema files found: doing nothing.
Setting up libcbor0.8:amd64 (0.8.0-2ubuntu1) ...
Setting up less (590-1ubuntu0.22.04.3) ...
Setting up libcurl3-gnutls:amd64 (7.81.0-1ubuntu1.20) ...
Setting up liberror-perl (0.17029-1) ...
Setting up autotools-dev (20220109.1) ...
Setting up libglib2.0-data (2.72.4-0ubuntu2.6) ...
Setting up libx11-data (2:1.7.5-1ubuntu0.3) ...
Setting up libsigsegv2:amd64 (2.13-1ubuntu3) ...
Setting up pkg-config (0.29.2-1ubuntu3) ...
Setting up libltdl7:amd64 (2.4.6-15build2) ...
Setting up libmd0:amd64 (1.0.4-1build1) ...
Setting up musl:amd64 (1.2.2-4) ...
Setting up git-man (1:2.34.1-1ubuntu1.15) ...
Setting up libfido2-1:amd64 (1.10.0-1) ...
Setting up libbsd0:amd64 (0.11.5-1) ...
Setting up libicu70:amd64 (70.1-2) ...
Setting up libxdmcp6:amd64 (1:1.1.3-0ubuntu5) ...
Setting up libxcb1:amd64 (1.14-3ubuntu3) ...
Setting up libtool (2.4.6-15build2) ...
Setting up libedit2:amd64 (3.1-20210910-1build1) ...
Setting up m4 (1.4.18-5ubuntu2) ...
Setting up musl-dev:amd64 (1.2.2-4) ...
Setting up git (1:2.34.1-1ubuntu1.15) ...
Setting up autoconf (2.71-2) ...
Setting up libx11-6:amd64 (2:1.7.5-1ubuntu0.3) ...
Setting up libxml2:amd64 (2.9.13+dfsg-1ubuntu0.9) ...
Setting up libxmuu1:amd64 (2:1.1.3-3) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/automake.1.gz because associated file /usr/share/man/man1/automake-1.16.1.gz (of link group automake) doesn't exist
update-alternatives: warning: skip creation of /usr/share/man/man1/aclocal.1.gz because associated file /usr/share/man/man1/aclocal-1.16.1.gz (of link group automake) doesn't exist
Setting up openssh-client (1:8.9p1-3ubuntu0.13) ...
update-alternatives: using /usr/bin/ssh to provide /usr/bin/rsh (rsh) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/rsh.1.gz because associated file /usr/share/man/man1/ssh.1.gz (of link group rsh) doesn't exist
update-alternatives: using /usr/bin/slogin to provide /usr/bin/rlogin (rlogin) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/rlogin.1.gz because associated file /usr/share/man/man1/slogin.1.gz (of link group rlogin) doesn't exist
update-alternatives: using /usr/bin/scp to provide /usr/bin/rcp (rcp) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/rcp.1.gz because associated file /usr/share/man/man1/scp.1.gz (of link group rcp) doesn't exist
Setting up libxext6:amd64 (2:1.3.4-1build1) ...
Setting up libltdl-dev:amd64 (2.4.6-15build2) ...
Setting up musl-tools (1.2.2-4) ...
Setting up shared-mime-info (2.1-2) ...
Setting up xauth (1:1.1-1build2) ...
Processing triggers for libc-bin (2.35-0ubuntu3.10) ...
↓ 59 lines
ASSISTANT

Now, let's navigate to the jq source directory and check what build system it uses:

compile-bench> cd /home/peter/jq-1.8.1 && ls -la
total 1184
drwxr-xr-x 9 peter peter   4096 Jul  1 11:40 .
drwxr-x--- 1 peter peter   4096 Sep 23 20:14 ..
-rw-r--r-- 1 peter peter  10686 Jul  1 11:39 AUTHORS
-rw-r--r-- 1 peter peter   7887 Jul  1 11:39 COPYING
-rw-r--r-- 1 peter peter  33286 Jul  1 11:39 ChangeLog
-rw-r--r-- 1 peter peter   9090 Jul  1 11:39 Makefile.am
-rw-r--r-- 1 peter peter  75461 Jul  1 11:39 Makefile.in
-rw-r--r-- 1 peter peter  24670 Jul  1 11:39 NEWS.md
-rw-r--r-- 1 peter peter   2434 Jul  1 11:39 README.md
-rw-r--r-- 1 peter peter  46459 Jul  1 11:39 aclocal.m4
drwxr-xr-x 3 peter peter   4096 Jul  1 11:40 config
-rwxr-xr-x 1 peter peter 665647 Jul  1 11:39 configure
-rw-r--r-- 1 peter peter   9881 Jul  1 11:39 configure.ac
drwxr-xr-x 5 peter peter   4096 Jul  1 11:40 docs
-rw-r--r-- 1 peter peter 124253 Jul  1 11:39 jq.1
-rw-r--r-- 1 peter peter 124253 Jul  1 11:39 jq.1.prebuilt
-rw-r--r-- 1 peter peter   1431 Jul  1 11:39 jq.spec
-rw-r--r-- 1 peter peter    255 Jul  1 11:39 libjq.pc
-rw-r--r-- 1 peter peter    246 Jul  1 11:39 libjq.pc.in
drwxr-xr-x 2 peter peter   4096 Jul  1 11:40 m4
drwxr-xr-x 2 peter peter   4096 Jul  1 11:40 scripts
drwxr-xr-x 2 peter peter   4096 Jul  1 11:40 src
drwxr-xr-x 4 peter peter   4096 Jul  1 11:40 tests
drwxr-xr-x 4 peter peter   4096 Jul  1 11:40 vendor
↓ 26 lines
ASSISTANT

jq uses autotools for building. Let's first check if we need to reconfigure or if we can directly build with musl. Let's examine the configure script to understand the build options:

compile-bench> ./configure --help | head -20
bash: ./configure: No such file or directory
ASSISTANT

Let me check the current directory and execute the configure script properly:

compile-bench> pwd && ls -la configure
/home/peter
ls: cannot access 'configure': No such file or directory
↓ 3 lines
ASSISTANT

I need to navigate to the jq directory:

compile-bench> cd /home/peter/jq-1.8.1 && ./configure --help | head -20
`configure' configures jq 1.8.1 to adapt to many kinds of systems.

Usage: ./configure [OPTION]... [VAR=VALUE]...

To assign environment variables (e.g., CC, CFLAGS...), specify them as
VAR=VALUE.  See below for descriptions of some of the useful variables.

Defaults for the options are specified in brackets.

Configuration:
  -h, --help              display this help and exit
      --help=short        display options specific to this package
      --help=recursive    display the short help of all the included packages
  -V, --version           display version information and exit
  -q, --quiet, --silent   do not print `checking ...' messages
      --cache-file=FILE   cache test results in FILE [disabled]
  -C, --config-cache      alias for `--cache-file=config.cache'
  -n, --no-create         do not create output files
      --srcdir=DIR        find the sources in DIR [configure dir or `..']
↓ 20 lines
ASSISTANT

Now let's configure jq to use musl with static linking. I'll set the appropriate environment variables for musl:

compile-bench> cd /home/peter/jq-1.8.1 && CC="musl-gcc -static" ./configure --prefix=/home/peter/result --disable-dependency-tracking
checking for gcc... musl-gcc -static
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether musl-gcc -static accepts -g... yes
checking for musl-gcc -static option to enable C11 features... none needed
checking whether musl-gcc -static understands -c and -o together... yes
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for wchar.h... yes
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking whether make supports nested variables... yes
checking dependency style of musl-gcc -static... none
checking whether make supports nested variables... (cached) yes
checking for ar... ar
checking the archiver (ar) interface... ar
checking whether to enable maintainer-specific portions of Makefiles... no
checking for gcc... (cached) musl-gcc -static
checking whether the compiler supports GNU C... (cached) yes
checking whether musl-gcc -static accepts -g... (cached) yes
checking for musl-gcc -static option to enable C11 features... (cached) none needed
checking whether musl-gcc -static understands -c and -o together... (cached) yes
checking how to run the C preprocessor... musl-gcc -static -E
checking for bison... no
checking for byacc... no
checking build system type... x86_64-pc-linux-musl
checking host system type... x86_64-pc-linux-musl
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by musl-gcc -static... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-musl file names to x86_64-pc-linux-musl format... func_convert_file_noop
checking how to convert x86_64-pc-linux-musl file names to toolchain format... func_co
[command output truncated]
 command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from musl-gcc -static object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if musl-gcc -static supports -fno-rtti -fno-exceptions... no
checking for musl-gcc -static option to produce PIC... -fPIC -DPIC
checking if musl-gcc -static PIC flag -fPIC -DPIC works... yes
checking if musl-gcc -static static flag -static works... yes
checking if musl-gcc -static supports -c -o file.o... yes
checking if musl-gcc -static supports -c -o file.o... (cached) yes
checking whether the musl-gcc -static linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking whether make sets $(MAKE)... (cached) yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking for sys/times.h... yes
checking size of int... 4
checking size of long... 8
checking size of long long... 8
checking size of void*... 8
checking for size_t... yes
checking for working alloca.h... yes
checking for alloca... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating test/Makefile
config.status: creating sample/Makefile
config.status: creating onig-config
config.status: creating src/config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default commands
↓ 127 lines
ASSISTANT

Great! The configuration was successful. Now let's build jq:

compile-bench> cd /home/peter/jq-1.8.1 && make -j$(nproc)
mkdir -p src
mkdir -p src
  GEN      src/builtin.inc
  GEN      src/config_opts.inc
mkdir -p src
  GEN      src/version.h
make  all-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making all in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making all in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make  all-am
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -static -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -c -o regparse.lo regparse.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -static -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -c -o regcomp.lo regcomp.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -static -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -c -o regexec.lo regexec.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -static -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -c -o regenc.lo regenc.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -static -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -c -o regerror.lo regerror.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -static -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -c -o regext.lo regext.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -static -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -c -o regsyntax.lo regsyntax.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -static -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -c -o regtrav.lo regtrav.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -c regexec.c -o regexec.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -c regparse.c -o regparse.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -c regerror.c -o regerror.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -c regtrav.c -o regtrav.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -c regext.c -o regext.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -c regcomp.c -o regcomp.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -c regenc.c -o regenc.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -c regsyntax.c -o regsyntax.o
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -static -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -c -o regversion.lo regversion.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -static -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -c -o st.lo st.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -static -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -c -o reggnu.lo reggnu.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -c regversion.c -o regversion.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -c st.c -o st.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -c reggnu.c -o reggnu.o
/bin/bash ../li
[command output truncated]
 sjis.lo sjis_prop.lo iso8859_1.lo iso8859_2.lo iso8859_3.lo iso8859_4.lo iso8859_5.lo iso8859_6.lo iso8859_7.lo iso8859_8.lo iso8859_9.lo iso8859_10.lo iso8859_11.lo iso8859_13.lo iso8859_14.lo iso8859_15.lo iso8859_16.lo euc_tw.lo euc_kr.lo big5.lo gb18030.lo koi8_r.lo cp1251.lo onig_init.lo  
libtool: link: ar cr .libs/libonig.a  regparse.o regcomp.o regexec.o regenc.o regerror.o regext.o regsyntax.o regtrav.o regversion.o st.o reggnu.o unicode.o unicode_unfold_key.o unicode_fold1_key.o unicode_fold2_key.o unicode_fold3_key.o ascii.o utf8.o utf16_be.o utf16_le.o utf32_be.o utf32_le.o euc_jp.o euc_jp_prop.o sjis.o sjis_prop.o iso8859_1.o iso8859_2.o iso8859_3.o iso8859_4.o iso8859_5.o iso8859_6.o iso8859_7.o iso8859_8.o iso8859_9.o iso8859_10.o iso8859_11.o iso8859_13.o iso8859_14.o iso8859_15.o iso8859_16.o euc_tw.o euc_kr.o big5.o gb18030.o koi8_r.o cp1251.o onig_init.o
libtool: link: ranlib .libs/libonig.a
libtool: link: ( cd ".libs" && rm -f "libonig.la" && ln -s "../libonig.la" "libonig.la" )
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making all in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making all in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
sed -e 's,[@]datadir[@],/home/peter/result/share,g' -e 's,[@]datarootdir[@],/home/peter/result/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/home/peter/result,g' -e 's,[@]exec_prefix[@],/home/peter/result,g' -e 's,[@]libdir[@],/home/peter/result/lib,g' -e 's,[@]includedir[@],/home/peter/result/include,g' < ./oniguruma.pc.in > oniguruma.pc
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
  CC       src/builtin.lo
  CC       src/bytecode.lo
  CC       src/compile.lo
  CC       src/execute.lo
  CC       src/jq_test.lo
  CC       src/jv.lo
  CC       src/jv_alloc.lo
  CC       src/jv_aux.lo
  CC       src/jv_dtoa.lo
  CC       src/jv_file.lo
  CC       src/jv_parse.lo
  CC       src/jv_print.lo
  CC       src/jv_unicode.lo
  CC       src/linker.lo
  CC       src/locfile.lo
  CC       src/util.lo
  CC       src/jv_dtoa_tsd.lo
  CC       vendor/decNumber/decContext.lo
  CC       vendor/decNumber/decNumber.lo
  CC       src/lexer.lo
  CC       src/parser.lo
mkdir -p src
  GEN      src/version.h
  CC       src/main.o
  CCLD     libjq.la
  CCLD     jq
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 86 lines
ASSISTANT

Excellent! The build completed successfully. Now let's install jq to the result directory:

compile-bench> cd /home/peter/jq-1.8.1 && make install
mkdir -p src
  GEN      src/version.h
make  install-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making install in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making install in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
 /usr/bin/mkdir -p '/home/peter/result/lib'
 /bin/bash ../libtool   --mode=install /usr/bin/install -c   libonig.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libonig.lai /home/peter/result/lib/libonig.la
libtool: install: /usr/bin/install -c .libs/libonig.a /home/peter/result/lib/libonig.a
libtool: install: chmod 644 /home/peter/result/lib/libonig.a
libtool: install: ranlib /home/peter/result/lib/libonig.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /home/peter/result/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
 /usr/bin/mkdir -p '/home/peter/result/include'
 /usr/bin/install -c -m 644 oniguruma.h oniggnu.h '/home/peter/result/include'
make  install-data-hook
make[5]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[5]: Nothing to be done for 'install-data-hook'.
make[5]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making install in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making install in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Not
[command output truncated]
ntering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
 /usr/bin/mkdir -p '/home/peter/result/bin'
 /usr/bin/install -c onig-config '/home/peter/result/bin'
 /usr/bin/mkdir -p '/home/peter/result/lib/pkgconfig'
 /usr/bin/install -c -m 644 oniguruma.pc '/home/peter/result/lib/pkgconfig'
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
mkdir -p src
  GEN      src/version.h
make[3]: Entering directory '/home/peter/jq-1.8.1'
mkdir -p src
  GEN      src/version.h
 /usr/bin/mkdir -p '/home/peter/result/lib'
 /bin/bash ./libtool   --mode=install /usr/bin/install -c   libjq.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libjq.lai /home/peter/result/lib/libjq.la
libtool: install: /usr/bin/install -c .libs/libjq.a /home/peter/result/lib/libjq.a
libtool: install: chmod 644 /home/peter/result/lib/libjq.a
libtool: install: ranlib /home/peter/result/lib/libjq.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /home/peter/result/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
 /usr/bin/mkdir -p '/home/peter/result/bin'
  /bin/bash ./libtool   --mode=install /usr/bin/install -c jq '/home/peter/result/bin'
libtool: install: /usr/bin/install -c jq /home/peter/result/bin/jq
 /usr/bin/mkdir -p '/home/peter/result/share/doc/jq'
 /usr/bin/install -c -m 644 README.md NEWS.md COPYING AUTHORS '/home/peter/result/share/doc/jq'
 /usr/bin/mkdir -p '/home/peter/result/include'
 /usr/bin/install -c -m 644 src/jv.h src/jq.h '/home/peter/result/include'
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /usr/bin/install -c -m 644 jq.1 '/home/peter/result/share/man/man1'
 /usr/bin/mkdir -p '/home/peter/result/lib/pkgconfig'
 /usr/bin/install -c -m 644 libjq.pc '/home/peter/result/lib/pkgconfig'
make[3]: Leaving directory '/home/peter/jq-1.8.1'
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 109 lines
ASSISTANT

Perfect! Now let's create the symlink from /home/peter/result/jq to the compiled jq binary:

compile-bench> ln -sf /home/peter/result/bin/jq /home/peter/result/jq
[empty output]
ASSISTANT

Now let's verify that the binary was built correctly as a static binary using musl:

compile-bench> file /home/peter/result/bin/jq
/home/peter/result/bin/jq: ELF 64-bit LSB pie executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib/ld-musl-x86_64.so.1, with debug_info, not stripped
ASSISTANT

I see that the binary is dynamically linked to musl, but we need it to be statically linked. Let's fix this by building with the -static flag more explicitly. Let me clean and reconfigure with proper static linking:

compile-bench> cd jq-1.8.1 && make clean
Making clean in vendor/oniguruma
make[1]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making clean in src
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
test -z "libonig.la" || rm -f libonig.la
rm -f ./so_locations
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making clean in test
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
 rm -f test_utf8 test_syntax test_options testc testcu test_regset test_back
rm -rf .libs _libs
rm -f *.o
test -z "test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log" || rm -f test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log
test -z "test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs" || rm -f test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making clean in sample
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
 rm -f encode listcap names simple sql syntax user_property callout echo count bug_fix regset scan callback_each_match
rm -rf .libs _libs
rm -f *.o
test -z "encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log" || rm -f encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log
test -z "encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs" || rm -f encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Entering directory '/home/peter/jq-1.8.1'
 rm -f jq
test -z "src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1" || rm -f src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1
test -z "libjq.la " || rm -f libjq.la 
rm -f ./so_locations
rm -rf .libs _libs
rm -rf src/.libs src/_libs
rm -rf vendor/decNumber/.libs vendor/decNumber/_libs
rm -f *.o
rm -f src/*.o
rm -f src/*.lo
rm -f vendor/decNumber/*.o
rm -f vendor/decNumber/*.lo
test -z "tests/mantest.log tests/jqtest.log tests/shtest.log tests/utf8test.log tests/base64test.log tests/uritest.log tests/optionaltest.log tests/onigtest.log tests/manonigtest.log" || rm -f tests/mantest.log tests/jqtest.log tests/shtest.log tests/utf8test.log tests/base64test.log tests/uritest.log tests/optionaltest.log tests/onigtest.log tests/manonigtest.log
test -z "tests/mantest.trs tests/jqtest.trs tests/shtest.trs tests/utf8test.trs tests/base64test.trs tests/uritest.trs tests/optionaltest.trs tests/onigtest.trs tests/manonigtest.trs" || rm -f tests/mantest.trs tests/jqtest.trs tests/shtest.trs tests/utf8test.trs tests/base64test.trs tests/uritest.trs tests/optionaltest.trs tests/onigtest.trs tests/manonigtest.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 54 lines
ASSISTANT

Now let's reconfigure and build with proper static linking flags:

compile-bench> cd /home/peter/jq-1.8.1 && CC="musl-gcc" CFLAGS="-static" LDFLAGS="-static" ./configure --prefix=/home/peter/result --disable-shared
checking for gcc... musl-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether musl-gcc accepts -g... yes
checking for musl-gcc option to enable C11 features... none needed
checking whether musl-gcc understands -c and -o together... yes
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for wchar.h... yes
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking whether make supports nested variables... yes
checking dependency style of musl-gcc... gcc3
checking whether make supports nested variables... (cached) yes
checking for ar... ar
checking the archiver (ar) interface... ar
checking whether to enable maintainer-specific portions of Makefiles... no
checking for gcc... (cached) musl-gcc
checking whether the compiler supports GNU C... (cached) yes
checking whether musl-gcc accepts -g... (cached) yes
checking for musl-gcc option to enable C11 features... (cached) none needed
checking whether musl-gcc understands -c and -o together... (cached) yes
checking how to run the C preprocessor... musl-gcc -E
checking for bison... no
checking for byacc... no
checking build system type... x86_64-pc-linux-musl
checking host system type... x86_64-pc-linux-musl
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by musl-gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-musl file names to x86_64-pc-linux-musl format... func_convert_file_noop
checking how to convert x86_64-pc-linux-musl file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking 
[command output truncated]
ace... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from musl-gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if musl-gcc supports -fno-rtti -fno-exceptions... no
checking for musl-gcc option to produce PIC... -fPIC -DPIC
checking if musl-gcc PIC flag -fPIC -DPIC works... yes
checking if musl-gcc static flag -static works... yes
checking if musl-gcc supports -c -o file.o... yes
checking if musl-gcc supports -c -o file.o... (cached) yes
checking whether the musl-gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... no
checking whether to build static libraries... yes
checking whether make sets $(MAKE)... (cached) yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking for sys/times.h... yes
checking size of int... 4
checking size of long... 8
checking size of long long... 8
checking size of void*... 8
checking for size_t... yes
checking for working alloca.h... yes
checking for alloca... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating test/Makefile
config.status: creating sample/Makefile
config.status: creating onig-config
config.status: creating src/config.h
config.status: src/config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default commands
↓ 131 lines
ASSISTANT

Good! I noticed that this time it says "checking whether to build shared libraries... no" and "checking whether to build static libraries... yes". Now let's build again and add LDFLAGS to ensure static linking:

compile-bench> cd /home/peter/jq-1.8.1 && make -j$(nproc) LDFLAGS="-static"
mkdir -p src
mkdir -p src
  GEN      src/builtin.inc
  GEN      src/config_opts.inc
mkdir -p src
  GEN      src/version.h
make  all-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making all in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making all in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make  all-am
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c -o regparse.lo regparse.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c -o regcomp.lo regcomp.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c -o regexec.lo regexec.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c -o regenc.lo regenc.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c -o regerror.lo regerror.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regext.lo -MD -MP -MF .deps/regext.Tpo -c -o regext.lo regext.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c -o regsyntax.lo regsyntax.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regtrav.lo -MD -MP -MF .deps/regtrav.Tpo -c -o regtrav.lo regtrav.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c regcomp.c -o regcomp.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c regparse.c -o regparse.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c regexec.c -o regexec.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c regerror.c -o regerror.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regtrav.lo -MD -MP -MF .deps/regtrav.Tpo -c regtrav.c -o regtrav.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c regsyntax.c -o regsyntax.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c regenc.c -o regenc.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regext.lo -MD -MP -MF .deps/regext.Tpo -c regext.c -o regext.o
mv -f .deps/regext.Tpo .deps/regext.Plo
mv -f .deps/regsyntax.Tpo .dep
[command output truncated]
uc_jp.lo euc_jp_prop.lo sjis.lo sjis_prop.lo iso8859_1.lo iso8859_2.lo iso8859_3.lo iso8859_4.lo iso8859_5.lo iso8859_6.lo iso8859_7.lo iso8859_8.lo iso8859_9.lo iso8859_10.lo iso8859_11.lo iso8859_13.lo iso8859_14.lo iso8859_15.lo iso8859_16.lo euc_tw.lo euc_kr.lo big5.lo gb18030.lo koi8_r.lo cp1251.lo onig_init.lo  
libtool: link: ar cr .libs/libonig.a  regparse.o regcomp.o regexec.o regenc.o regerror.o regext.o regsyntax.o regtrav.o regversion.o st.o reggnu.o unicode.o unicode_unfold_key.o unicode_fold1_key.o unicode_fold2_key.o unicode_fold3_key.o ascii.o utf8.o utf16_be.o utf16_le.o utf32_be.o utf32_le.o euc_jp.o euc_jp_prop.o sjis.o sjis_prop.o iso8859_1.o iso8859_2.o iso8859_3.o iso8859_4.o iso8859_5.o iso8859_6.o iso8859_7.o iso8859_8.o iso8859_9.o iso8859_10.o iso8859_11.o iso8859_13.o iso8859_14.o iso8859_15.o iso8859_16.o euc_tw.o euc_kr.o big5.o gb18030.o koi8_r.o cp1251.o onig_init.o
libtool: link: ranlib .libs/libonig.a
libtool: link: ( cd ".libs" && rm -f "libonig.la" && ln -s "../libonig.la" "libonig.la" )
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making all in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making all in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
sed -e 's,[@]datadir[@],/home/peter/result/share,g' -e 's,[@]datarootdir[@],/home/peter/result/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/home/peter/result,g' -e 's,[@]exec_prefix[@],/home/peter/result,g' -e 's,[@]libdir[@],/home/peter/result/lib,g' -e 's,[@]includedir[@],/home/peter/result/include,g' < ./oniguruma.pc.in > oniguruma.pc
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
  CC       src/builtin.lo
  CC       src/bytecode.lo
  CC       src/compile.lo
  CC       src/execute.lo
  CC       src/jq_test.lo
  CC       src/jv.lo
  CC       src/jv_alloc.lo
  CC       src/jv_aux.lo
  CC       src/jv_dtoa.lo
  CC       src/jv_file.lo
  CC       src/jv_parse.lo
  CC       src/jv_print.lo
  CC       src/jv_unicode.lo
  CC       src/linker.lo
  CC       src/locfile.lo
  CC       src/util.lo
  CC       src/jv_dtoa_tsd.lo
  CC       vendor/decNumber/decContext.lo
  CC       vendor/decNumber/decNumber.lo
  CC       src/lexer.lo
  CC       src/parser.lo
  GEN      jq.1
  CC       src/main.o
  CCLD     libjq.la
  CCLD     jq
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 80 lines
ASSISTANT

Good! Let's reinstall and check if the binary is now statically linked:

compile-bench> cd /home/peter/jq-1.8.1 && make install
make  install-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making install in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making install in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
 /usr/bin/mkdir -p '/home/peter/result/lib'
 /bin/bash ../libtool   --mode=install /usr/bin/install -c   libonig.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libonig.lai /home/peter/result/lib/libonig.la
libtool: install: /usr/bin/install -c .libs/libonig.a /home/peter/result/lib/libonig.a
libtool: install: chmod 644 /home/peter/result/lib/libonig.a
libtool: install: ranlib /home/peter/result/lib/libonig.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /home/peter/result/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
 /usr/bin/mkdir -p '/home/peter/result/include'
 /usr/bin/install -c -m 644 oniguruma.h oniggnu.h '/home/peter/result/include'
make  install-data-hook
make[5]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[5]: Nothing to be done for 'install-data-hook'.
make[5]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making install in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making install in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.

[command output truncated]

make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
 /usr/bin/mkdir -p '/home/peter/result/bin'
 /usr/bin/install -c onig-config '/home/peter/result/bin'
 /usr/bin/mkdir -p '/home/peter/result/lib/pkgconfig'
 /usr/bin/install -c -m 644 oniguruma.pc '/home/peter/result/lib/pkgconfig'
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
make[3]: Entering directory '/home/peter/jq-1.8.1'
 /usr/bin/mkdir -p '/home/peter/result/lib'
 /bin/bash ./libtool   --mode=install /usr/bin/install -c   libjq.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libjq.lai /home/peter/result/lib/libjq.la
libtool: install: /usr/bin/install -c .libs/libjq.a /home/peter/result/lib/libjq.a
libtool: install: chmod 644 /home/peter/result/lib/libjq.a
libtool: install: ranlib /home/peter/result/lib/libjq.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /home/peter/result/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
 /usr/bin/mkdir -p '/home/peter/result/bin'
  /bin/bash ./libtool   --mode=install /usr/bin/install -c jq '/home/peter/result/bin'
libtool: install: /usr/bin/install -c jq /home/peter/result/bin/jq
 /usr/bin/mkdir -p '/home/peter/result/share/doc/jq'
 /usr/bin/install -c -m 644 README.md NEWS.md COPYING AUTHORS '/home/peter/result/share/doc/jq'
 /usr/bin/mkdir -p '/home/peter/result/include'
 /usr/bin/install -c -m 644 src/jv.h src/jq.h '/home/peter/result/include'
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /usr/bin/install -c -m 644 jq.1 '/home/peter/result/share/man/man1'
 /usr/bin/mkdir -p '/home/peter/result/lib/pkgconfig'
 /usr/bin/install -c -m 644 libjq.pc '/home/peter/result/lib/pkgconfig'
make[3]: Leaving directory '/home/peter/jq-1.8.1'
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 106 lines
ASSISTANT

Now let's check if the binary is statically linked:

compile-bench> file /home/peter/result/bin/jq
/home/peter/result/bin/jq: ELF 64-bit LSB pie executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib/ld-musl-x86_64.so.1, with debug_info, not stripped
ASSISTANT

It's still dynamically linked to musl. I need to explicitly specify static linking. Let me try a different approach - I'll force static linking by explicitly setting LDFLAGS:

compile-bench> cd jq-1.8.1 && make clean
Making clean in vendor/oniguruma
make[1]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making clean in src
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
test -z "libonig.la" || rm -f libonig.la
rm -f ./so_locations
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making clean in test
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
 rm -f test_utf8 test_syntax test_options testc testcu test_regset test_back
rm -rf .libs _libs
rm -f *.o
test -z "test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log" || rm -f test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log
test -z "test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs" || rm -f test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making clean in sample
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
 rm -f encode listcap names simple sql syntax user_property callout echo count bug_fix regset scan callback_each_match
rm -rf .libs _libs
rm -f *.o
test -z "encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log" || rm -f encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log
test -z "encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs" || rm -f encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Entering directory '/home/peter/jq-1.8.1'
 rm -f jq
test -z "src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1" || rm -f src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1
test -z "libjq.la " || rm -f libjq.la 
rm -f ./so_locations
rm -rf .libs _libs
rm -rf src/.libs src/_libs
rm -rf vendor/decNumber/.libs vendor/decNumber/_libs
rm -f *.o
rm -f src/*.o
rm -f src/*.lo
rm -f vendor/decNumber/*.o
rm -f vendor/decNumber/*.lo
test -z "tests/mantest.log tests/jqtest.log tests/shtest.log tests/utf8test.log tests/base64test.log tests/uritest.log tests/optionaltest.log tests/onigtest.log tests/manonigtest.log" || rm -f tests/mantest.log tests/jqtest.log tests/shtest.log tests/utf8test.log tests/base64test.log tests/uritest.log tests/optionaltest.log tests/onigtest.log tests/manonigtest.log
test -z "tests/mantest.trs tests/jqtest.trs tests/shtest.trs tests/utf8test.trs tests/base64test.trs tests/uritest.trs tests/optionaltest.trs tests/onigtest.trs tests/manonigtest.trs" || rm -f tests/mantest.trs tests/jqtest.trs tests/shtest.trs tests/utf8test.trs tests/base64test.trs tests/uritest.trs tests/optionaltest.trs tests/onigtest.trs tests/manonigtest.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 54 lines
ASSISTANT

Now I'll try building with explicit static linking by setting LDFLAGS properly and also including a static libtool configuration:

compile-bench> cd /home/peter/jq-1.8.1 && CC="musl-gcc" ./configure --prefix=/home/peter/result --disable-shared
checking for gcc... musl-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether musl-gcc accepts -g... yes
checking for musl-gcc option to enable C11 features... none needed
checking whether musl-gcc understands -c and -o together... yes
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for wchar.h... yes
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking whether make supports nested variables... yes
checking dependency style of musl-gcc... gcc3
checking whether make supports nested variables... (cached) yes
checking for ar... ar
checking the archiver (ar) interface... ar
checking whether to enable maintainer-specific portions of Makefiles... no
checking for gcc... (cached) musl-gcc
checking whether the compiler supports GNU C... (cached) yes
checking whether musl-gcc accepts -g... (cached) yes
checking for musl-gcc option to enable C11 features... (cached) none needed
checking whether musl-gcc understands -c and -o together... (cached) yes
checking how to run the C preprocessor... musl-gcc -E
checking for bison... no
checking for byacc... no
checking build system type... x86_64-pc-linux-musl
checking host system type... x86_64-pc-linux-musl
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by musl-gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-musl file names to x86_64-pc-linux-musl format... func_convert_file_noop
checking how to convert x86_64-pc-linux-musl file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking 
[command output truncated]
ace... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from musl-gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if musl-gcc supports -fno-rtti -fno-exceptions... no
checking for musl-gcc option to produce PIC... -fPIC -DPIC
checking if musl-gcc PIC flag -fPIC -DPIC works... yes
checking if musl-gcc static flag -static works... yes
checking if musl-gcc supports -c -o file.o... yes
checking if musl-gcc supports -c -o file.o... (cached) yes
checking whether the musl-gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... no
checking whether to build static libraries... yes
checking whether make sets $(MAKE)... (cached) yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking for sys/times.h... yes
checking size of int... 4
checking size of long... 8
checking size of long long... 8
checking size of void*... 8
checking for size_t... yes
checking for working alloca.h... yes
checking for alloca... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating test/Makefile
config.status: creating sample/Makefile
config.status: creating onig-config
config.status: creating src/config.h
config.status: src/config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default commands
↓ 131 lines
ASSISTANT

Now I need to link the final executable statically. The issue is that the executable might still be linking dynamically even though the libraries are static. Let me try modifying the Makefile or manually linking:

compile-bench> cd jq-1.8.1 && make LDFLAGS="-static" CFLAGS="-static"
mkdir -p src
  GEN      src/builtin.inc
mkdir -p src
  GEN      src/config_opts.inc
mkdir -p src
  GEN      src/version.h
make  all-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making all in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making all in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make  all-am
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c -o regparse.lo regparse.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c regparse.c -o regparse.o
mv -f .deps/regparse.Tpo .deps/regparse.Plo
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c -o regcomp.lo regcomp.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c regcomp.c -o regcomp.o
mv -f .deps/regcomp.Tpo .deps/regcomp.Plo
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c -o regexec.lo regexec.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c regexec.c -o regexec.o
mv -f .deps/regexec.Tpo .deps/regexec.Plo
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c -o regenc.lo regenc.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c regenc.c -o regenc.o
mv -f .deps/regenc.Tpo .deps/regenc.Plo
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c -o regerror.lo regerror.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c regerror.c -o regerror.o
mv -f .deps/regerror.Tpo .deps/regerror.Plo
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regext.lo -MD -MP -MF .deps/regext.Tpo -c -o regext.lo regext.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regext.lo -MD -MP -MF .deps/regext.Tpo -c regext.c -o regext.o
mv -f .deps/regext.Tpo .deps/regext.Plo
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c -o regsyntax.lo regsyntax.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c regsyntax.c -o regsyntax.o
mv -f .deps/regsyntax.Tpo .deps/regsyntax.Plo
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG
[command output truncated]
uc_jp.lo euc_jp_prop.lo sjis.lo sjis_prop.lo iso8859_1.lo iso8859_2.lo iso8859_3.lo iso8859_4.lo iso8859_5.lo iso8859_6.lo iso8859_7.lo iso8859_8.lo iso8859_9.lo iso8859_10.lo iso8859_11.lo iso8859_13.lo iso8859_14.lo iso8859_15.lo iso8859_16.lo euc_tw.lo euc_kr.lo big5.lo gb18030.lo koi8_r.lo cp1251.lo onig_init.lo  
libtool: link: ar cr .libs/libonig.a  regparse.o regcomp.o regexec.o regenc.o regerror.o regext.o regsyntax.o regtrav.o regversion.o st.o reggnu.o unicode.o unicode_unfold_key.o unicode_fold1_key.o unicode_fold2_key.o unicode_fold3_key.o ascii.o utf8.o utf16_be.o utf16_le.o utf32_be.o utf32_le.o euc_jp.o euc_jp_prop.o sjis.o sjis_prop.o iso8859_1.o iso8859_2.o iso8859_3.o iso8859_4.o iso8859_5.o iso8859_6.o iso8859_7.o iso8859_8.o iso8859_9.o iso8859_10.o iso8859_11.o iso8859_13.o iso8859_14.o iso8859_15.o iso8859_16.o euc_tw.o euc_kr.o big5.o gb18030.o koi8_r.o cp1251.o onig_init.o
libtool: link: ranlib .libs/libonig.a
libtool: link: ( cd ".libs" && rm -f "libonig.la" && ln -s "../libonig.la" "libonig.la" )
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making all in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making all in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
sed -e 's,[@]datadir[@],/home/peter/result/share,g' -e 's,[@]datarootdir[@],/home/peter/result/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/home/peter/result,g' -e 's,[@]exec_prefix[@],/home/peter/result,g' -e 's,[@]libdir[@],/home/peter/result/lib,g' -e 's,[@]includedir[@],/home/peter/result/include,g' < ./oniguruma.pc.in > oniguruma.pc
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
  CC       src/main.o
  CC       src/builtin.lo
  CC       src/bytecode.lo
  CC       src/compile.lo
  CC       src/execute.lo
  CC       src/jq_test.lo
  CC       src/jv.lo
  CC       src/jv_alloc.lo
  CC       src/jv_aux.lo
  CC       src/jv_dtoa.lo
  CC       src/jv_file.lo
  CC       src/jv_parse.lo
  CC       src/jv_print.lo
  CC       src/jv_unicode.lo
  CC       src/linker.lo
  CC       src/locfile.lo
  CC       src/util.lo
  CC       src/jv_dtoa_tsd.lo
  CC       vendor/decNumber/decContext.lo
  CC       vendor/decNumber/decNumber.lo
  CC       src/lexer.lo
  CC       src/parser.lo
  CCLD     libjq.la
  CCLD     jq
  GEN      jq.1
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 84 lines
ASSISTANT

Now let me check the jq binary to see if it's statically linked:

compile-bench> file /home/peter/jq-1.8.1/jq
/home/peter/jq-1.8.1/jq: ELF 64-bit LSB pie executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib/ld-musl-x86_64.so.1, with debug_info, not stripped
ASSISTANT

Still not statically linked. Let me modify the libtool command to force static linking. I'll manually edit the libtool script or try a different approach. Let me check the Makefile to see how jq is linked:

compile-bench> grep -A5 "jq:" /home/peter/jq-1.8.1/Makefile
[empty output]
ASSISTANT

Let me try forcing static linking by manually linking the binary after building:

compile-bench> cd /home/peter/jq-1.8.1 && make clean
Making clean in vendor/oniguruma
make[1]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making clean in src
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
test -z "libonig.la" || rm -f libonig.la
rm -f ./so_locations
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making clean in test
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
 rm -f test_utf8 test_syntax test_options testc testcu test_regset test_back
rm -rf .libs _libs
rm -f *.o
test -z "test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log" || rm -f test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log
test -z "test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs" || rm -f test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making clean in sample
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
 rm -f encode listcap names simple sql syntax user_property callout echo count bug_fix regset scan callback_each_match
rm -rf .libs _libs
rm -f *.o
test -z "encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log" || rm -f encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log
test -z "encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs" || rm -f encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Entering directory '/home/peter/jq-1.8.1'
 rm -f jq
test -z "src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1" || rm -f src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1
test -z "libjq.la " || rm -f libjq.la 
rm -f ./so_locations
rm -rf .libs _libs
rm -rf src/.libs src/_libs
rm -rf vendor/decNumber/.libs vendor/decNumber/_libs
rm -f *.o
rm -f src/*.o
rm -f src/*.lo
rm -f vendor/decNumber/*.o
rm -f vendor/decNumber/*.lo
test -z "tests/mantest.log tests/jqtest.log tests/shtest.log tests/utf8test.log tests/base64test.log tests/uritest.log tests/optionaltest.log tests/onigtest.log tests/manonigtest.log" || rm -f tests/mantest.log tests/jqtest.log tests/shtest.log tests/utf8test.log tests/base64test.log tests/uritest.log tests/optionaltest.log tests/onigtest.log tests/manonigtest.log
test -z "tests/mantest.trs tests/jqtest.trs tests/shtest.trs tests/utf8test.trs tests/base64test.trs tests/uritest.trs tests/optionaltest.trs tests/onigtest.trs tests/manonigtest.trs" || rm -f tests/mantest.trs tests/jqtest.trs tests/shtest.trs tests/utf8test.trs tests/base64test.trs tests/uritest.trs tests/optionaltest.trs tests/onigtest.trs tests/manonigtest.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 54 lines
ASSISTANT

Let me try a different approach - I'll build with a more explicit static linking command and potentially rebuild the libtool:

compile-bench> cd /home/peter/jq-1.8.1 && ./configure --prefix=/home/peter/result CC="musl-gcc -static" CFLAGS="-static" LDFLAGS="-static" --host=x86_64-linux-musl --disable-shared
checking for x86_64-linux-musl-gcc... musl-gcc -static
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether musl-gcc -static accepts -g... yes
checking for musl-gcc -static option to enable C11 features... none needed
checking whether musl-gcc -static understands -c and -o together... yes
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for wchar.h... yes
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking whether make supports nested variables... yes
checking dependency style of musl-gcc -static... gcc3
checking whether make supports nested variables... (cached) yes
checking for x86_64-linux-musl-ar... no
checking for x86_64-linux-musl-lib... no
checking for x86_64-linux-musl-link... no
checking for ar... ar
checking the archiver (ar) interface... ar
checking whether to enable maintainer-specific portions of Makefiles... no
checking for x86_64-linux-musl-gcc... (cached) musl-gcc -static
checking whether the compiler supports GNU C... (cached) yes
checking whether musl-gcc -static accepts -g... (cached) yes
checking for musl-gcc -static option to enable C11 features... (cached) none needed
checking whether musl-gcc -static understands -c and -o together... (cached) yes
checking how to run the C preprocessor... musl-gcc -static -E
checking for bison... no
checking for byacc... no
checking build system type... x86_64-pc-linux-musl
checking host system type... x86_64-pc-linux-musl
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by musl-gcc -static... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linu
[command output truncated]
checking for /usr/bin/ld option to reload object files... -r
checking for x86_64-linux-musl-file... no
checking for file... file
checking for x86_64-linux-musl-objdump... no
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for x86_64-linux-musl-dlltool... no
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for x86_64-linux-musl-ar... no
checking for ar... ar
checking for archiver @FILE support... @
checking for x86_64-linux-musl-strip... strip
checking for x86_64-linux-musl-ranlib... no
checking for ranlib... ranlib
checking command to parse nm output from musl-gcc -static object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for x86_64-linux-musl-mt... no
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if musl-gcc -static supports -fno-rtti -fno-exceptions... no
checking for musl-gcc -static option to produce PIC... -fPIC -DPIC
checking if musl-gcc -static PIC flag -fPIC -DPIC works... yes
checking if musl-gcc -static static flag -static works... yes
checking if musl-gcc -static supports -c -o file.o... yes
checking if musl-gcc -static supports -c -o file.o... (cached) yes
checking whether the musl-gcc -static linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... no
checking whether to build static libraries... yes
checking whether make sets $(MAKE)... (cached) yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking for sys/times.h... yes
checking size of int... 4
checking size of long... 8
checking size of long long... 8
checking size of void*... 8
checking for size_t... yes
checking for working alloca.h... yes
checking for alloca... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating test/Makefile
config.status: creating sample/Makefile
config.status: creating onig-config
config.status: creating src/config.h
config.status: src/config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default commands
↓ 132 lines
ASSISTANT

Good! The configuration looks good. Now let's build and then manually link the final executable to force static linking:

compile-bench> cd /home/peter/jq-1.8.1 && make LDFLAGS="-static" -j4
mkdir -p src
mkdir -p src
  GEN      src/builtin.inc
  GEN      src/config_opts.inc
mkdir -p src
  GEN      src/version.h
make  all-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making all in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making all in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make  all-am
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -static -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c -o regparse.lo regparse.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -static -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c -o regcomp.lo regcomp.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -static -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c -o regexec.lo regexec.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -static -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c -o regenc.lo regenc.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c regenc.c -o regenc.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c regparse.c -o regparse.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c regcomp.c -o regcomp.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c regexec.c -o regexec.o
mv -f .deps/regenc.Tpo .deps/regenc.Plo
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -static -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c -o regerror.lo regerror.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c regerror.c -o regerror.o
mv -f .deps/regerror.Tpo .deps/regerror.Plo
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -static -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regext.lo -MD -MP -MF .deps/regext.Tpo -c -o regext.lo regext.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regext.lo -MD -MP -MF .deps/regext.Tpo -c regext.c -o regext.o
mv -f .deps/regext.Tpo .deps/regext.Plo
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -static -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c -o regsyntax.lo regsyntax.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c regsyntax.c -o regsyntax.o
mv -f .deps/regsyntax.Tpo .deps/regsyntax.Plo
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -static -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regtrav.lo -MD -MP -MF .deps/regt
[command output truncated]
uc_jp.lo euc_jp_prop.lo sjis.lo sjis_prop.lo iso8859_1.lo iso8859_2.lo iso8859_3.lo iso8859_4.lo iso8859_5.lo iso8859_6.lo iso8859_7.lo iso8859_8.lo iso8859_9.lo iso8859_10.lo iso8859_11.lo iso8859_13.lo iso8859_14.lo iso8859_15.lo iso8859_16.lo euc_tw.lo euc_kr.lo big5.lo gb18030.lo koi8_r.lo cp1251.lo onig_init.lo  
libtool: link: ar cr .libs/libonig.a  regparse.o regcomp.o regexec.o regenc.o regerror.o regext.o regsyntax.o regtrav.o regversion.o st.o reggnu.o unicode.o unicode_unfold_key.o unicode_fold1_key.o unicode_fold2_key.o unicode_fold3_key.o ascii.o utf8.o utf16_be.o utf16_le.o utf32_be.o utf32_le.o euc_jp.o euc_jp_prop.o sjis.o sjis_prop.o iso8859_1.o iso8859_2.o iso8859_3.o iso8859_4.o iso8859_5.o iso8859_6.o iso8859_7.o iso8859_8.o iso8859_9.o iso8859_10.o iso8859_11.o iso8859_13.o iso8859_14.o iso8859_15.o iso8859_16.o euc_tw.o euc_kr.o big5.o gb18030.o koi8_r.o cp1251.o onig_init.o
libtool: link: ranlib .libs/libonig.a
libtool: link: ( cd ".libs" && rm -f "libonig.la" && ln -s "../libonig.la" "libonig.la" )
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making all in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making all in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
sed -e 's,[@]datadir[@],/home/peter/result/share,g' -e 's,[@]datarootdir[@],/home/peter/result/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/home/peter/result,g' -e 's,[@]exec_prefix[@],/home/peter/result,g' -e 's,[@]libdir[@],/home/peter/result/lib,g' -e 's,[@]includedir[@],/home/peter/result/include,g' < ./oniguruma.pc.in > oniguruma.pc
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
  CC       src/builtin.lo
  CC       src/bytecode.lo
  CC       src/compile.lo
  CC       src/execute.lo
  CC       src/jq_test.lo
  CC       src/jv.lo
  CC       src/jv_alloc.lo
  CC       src/jv_aux.lo
  CC       src/jv_dtoa.lo
  CC       src/jv_file.lo
  CC       src/jv_parse.lo
  CC       src/jv_print.lo
  CC       src/jv_unicode.lo
  CC       src/linker.lo
  CC       src/locfile.lo
  CC       src/util.lo
  CC       src/jv_dtoa_tsd.lo
  CC       vendor/decNumber/decContext.lo
  CC       vendor/decNumber/decNumber.lo
  CC       src/lexer.lo
  CC       src/parser.lo
  GEN      jq.1
  CC       src/main.o
  CCLD     libjq.la
  CCLD     jq
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 81 lines
ASSISTANT

Now let me manually link the jq binary to force static linking:

compile-bench> cd /home/peter/jq-1.8.1 && find . -name "*.o" | head -5
./src/jq_test.o
./src/jv_alloc.o
./src/jv_dtoa_tsd.o
./src/locfile.o
./src/jv_dtoa.o
↓ 6 lines
ASSISTANT

Let me manually link the executable with -static flag:

compile-bench> cd /home/peter/jq-1.8.1 && musl-gcc -static -o jq.static src/*.o vendor/decNumber/*.o -Lvendor/oniguruma/src/.libs -lonig
[empty output]
ASSISTANT

Check if the manually linked binary is static:

compile-bench> file /home/peter/jq-1.8.1/jq_static
/home/peter/jq-1.8.1/jq_static: cannot open `/home/peter/jq-1.8.1/jq_static' (No such file or directory)
ASSISTANT

Let me find all the objects and link them manually with static flags:

compile-bench> cd /home/peter/jq-1.8.1 && find . -name "*.o" -type f | head -5
./src/jq_test.o
./src/jv_alloc.o
./src/jv_dtoa_tsd.o
./src/locfile.o
./src/jv_dtoa.o
↓ 6 lines
ASSISTANT

Let me find all the object files and the libraries:

compile-bench> musl-gcc -static -o /home/peter/jq-1.8.1/jq_static ./src/main.o .libs/libjq.a vendor/oniguruma/src/.libs/libonig.a vendor/decNumber/.libs/libdecNumber.a -lm
/usr/bin/ld: cannot find ./src/main.o: No such file or directory
/usr/bin/ld: cannot find .libs/libjq.a: No such file or directory
/usr/bin/ld: cannot find vendor/oniguruma/src/.libs/libonig.a: No such file or directory
/usr/bin/ld: cannot find vendor/decNumber/.libs/libdecNumber.a: No such file or directory
collect2: error: ld returned 1 exit status
↓ 6 lines
ASSISTANT

Let me find where the actual object files and libraries are:

compile-bench> find /home/peter/jq-1.8.1 -name "*.o" -o -name "*.a" | head -20
/home/peter/jq-1.8.1/src/jq_test.o
/home/peter/jq-1.8.1/src/jv_alloc.o
/home/peter/jq-1.8.1/src/jv_dtoa_tsd.o
/home/peter/jq-1.8.1/src/locfile.o
/home/peter/jq-1.8.1/src/jv_dtoa.o
/home/peter/jq-1.8.1/src/jv.o
/home/peter/jq-1.8.1/src/jv_print.o
/home/peter/jq-1.8.1/src/util.o
/home/peter/jq-1.8.1/src/main.o
/home/peter/jq-1.8.1/src/jv_parse.o
/home/peter/jq-1.8.1/src/jv_aux.o
/home/peter/jq-1.8.1/src/jv_file.o
/home/peter/jq-1.8.1/src/jv_unicode.o
/home/peter/jq-1.8.1/src/parser.o
/home/peter/jq-1.8.1/src/execute.o
/home/peter/jq-1.8.1/src/linker.o
/home/peter/jq-1.8.1/src/compile.o
/home/peter/jq-1.8.1/src/builtin.o
/home/peter/jq-1.8.1/src/lexer.o
/home/peter/jq-1.8.1/src/bytecode.o
↓ 21 lines
ASSISTANT

Let me also find the library files:

compile-bench> find /home/peter/jq-1.8.1 -name "*.a" -type f
/home/peter/jq-1.8.1/vendor/oniguruma/src/.libs/libonig.a
/home/peter/jq-1.8.1/.libs/libjq.a
↓ 3 lines
ASSISTANT

Now let me manually link all the necessary files:

compile-bench> cd /home/peter/jq-1.8.1 && musl-gcc -static -o jq.static src/*.o vendor/decNumber/*.o .libs/libjq.a vendor/oniguruma/src/.libs/libonig.a -lm
[empty output]
ASSISTANT

Let me check if the manually linked binary was created and is static:

compile-bench> file /home/peter/jq-1.8.1/jq.static
/home/peter/jq-1.8.1/jq.static: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, with debug_info, not stripped
ASSISTANT

Perfect! The binary is now statically linked. Now let's replace the jq binary with our statically linked version and install it:

compile-bench> cd /home/peter/jq-1.8.1 && cp jq.static jq && make install
make  install-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making install in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making install in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
 /usr/bin/mkdir -p '/home/peter/result/lib'
 /bin/bash ../libtool   --mode=install /usr/bin/install -c   libonig.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libonig.lai /home/peter/result/lib/libonig.la
libtool: install: /usr/bin/install -c .libs/libonig.a /home/peter/result/lib/libonig.a
libtool: install: chmod 644 /home/peter/result/lib/libonig.a
libtool: install: ranlib /home/peter/result/lib/libonig.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /home/peter/result/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
 /usr/bin/mkdir -p '/home/peter/result/include'
 /usr/bin/install -c -m 644 oniguruma.h oniggnu.h '/home/peter/result/include'
make  install-data-hook
make[5]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[5]: Nothing to be done for 'install-data-hook'.
make[5]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making install in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making install in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.

[command output truncated]

make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
 /usr/bin/mkdir -p '/home/peter/result/bin'
 /usr/bin/install -c onig-config '/home/peter/result/bin'
 /usr/bin/mkdir -p '/home/peter/result/lib/pkgconfig'
 /usr/bin/install -c -m 644 oniguruma.pc '/home/peter/result/lib/pkgconfig'
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
make[3]: Entering directory '/home/peter/jq-1.8.1'
 /usr/bin/mkdir -p '/home/peter/result/lib'
 /bin/bash ./libtool   --mode=install /usr/bin/install -c   libjq.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libjq.lai /home/peter/result/lib/libjq.la
libtool: install: /usr/bin/install -c .libs/libjq.a /home/peter/result/lib/libjq.a
libtool: install: chmod 644 /home/peter/result/lib/libjq.a
libtool: install: ranlib /home/peter/result/lib/libjq.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /home/peter/result/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
 /usr/bin/mkdir -p '/home/peter/result/bin'
  /bin/bash ./libtool   --mode=install /usr/bin/install -c jq '/home/peter/result/bin'
libtool: install: /usr/bin/install -c jq /home/peter/result/bin/jq
 /usr/bin/mkdir -p '/home/peter/result/share/doc/jq'
 /usr/bin/install -c -m 644 README.md NEWS.md COPYING AUTHORS '/home/peter/result/share/doc/jq'
 /usr/bin/mkdir -p '/home/peter/result/include'
 /usr/bin/install -c -m 644 src/jv.h src/jq.h '/home/peter/result/include'
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /usr/bin/install -c -m 644 jq.1 '/home/peter/result/share/man/man1'
 /usr/bin/mkdir -p '/home/peter/result/lib/pkgconfig'
 /usr/bin/install -c -m 644 libjq.pc '/home/peter/result/lib/pkgconfig'
make[3]: Leaving directory '/home/peter/jq-1.8.1'
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 106 lines
ASSISTANT

Now let's create the symlink and verify everything works:

compile-bench> ln -sf /home/peter/result/bin/jq /home/peter/result/jq
[empty output]
ASSISTANT

Now let's verify that our binary is statically linked and uses musl:

compile-bench> file /home/peter/result/bin/jq
/home/peter/result/bin/jq: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, with debug_info, not stripped
ASSISTANT

Perfect! The binary is now properly statically linked. Let's verify that it actually works and confirm it's using musl:

compile-bench> file /home/peter/result/bin/jq
/home/peter/result/bin/jq: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, with debug_info, not stripped
ASSISTANT

Let's also test that jq works:

compile-bench> echo '{"test": "hello"}' | /home/peter/result/bin/jq .
{
  "test": "hello"
}
↓ 4 lines
ASSISTANT

Great! Let's also check if we can test musl compatibility by running the binary with ldd to show static linking:

compile-bench> ldd /home/peter/result/bin/jq 2>&1
	not a dynamic executable
ASSISTANT

Perfect! This confirms the binary is statically linked. Let's check that everything is in place:

compile-bench> ls -la /home/peter/result/jq
lrwxrwxrwx 1 peter peter 25 Sep 23 20:17 /home/peter/result/jq -> /home/peter/result/bin/jq
ASSISTANT

Excellent! Let's do a final verification that everything is correctly set up:

compile-bench> cd /home/peter && echo '{"version": "test"}' | ./result/jq .
{
  "version": "test"
}
↓ 4 lines
ASSISTANT

Perfect! Let me verify that there's no glibc dependency:

compile-bench> strings /home/peter/result/bin/jq | grep -i "glibc" | head -5
[empty output]
ASSISTANT

Great! No glibc strings found in the binary. Let me check for musl strings to confirm musl was used:

compile-bench> strings /home/peter/result/bin/jq | grep -i "musl" | head -5
--prefix=/home/peter/result 'CC=musl-gcc -static' CFLAGS=-static LDFLAGS=-static --host=x86_64-linux-musl --disable-shared host_alias=x86_64-linux-musl
MUSL_LOCPATH
/build/musl-kKuXgX/musl-1.2.2
↓ 4 lines
ASSISTANT

Perfect! The binary contains musl-related strings, confirming that it was built with musl.

Summary

I have successfully compiled jq v1.8.1 with musl as the C standard library and installed it to /home/peter/result. Here's what was accomplished:

1. Source extraction: Extracted jq source code from /home/peter/jq.tar.gz to /home/peter/jq-1.8.1

2. Dependencies installed: Installed necessary build tools including musl, musl-dev, musl-tools, and compilers

3. Configuration: Configured jq with the correct settings for musl static linking:
- Used CC=musl-gcc -static
- Set CFLAGS=-static and LDFLAGS=-static
- Configured for --host=x86_64-linux-musl
- Used --disable-shared to build static libraries only

4. Compilation: Built jq successfully with musl compiler

5. Manual static linking: When the default build produced a dynamically linked binary, I manually linked the object files and libraries to create a fully statically linked binary using:
```bash
musl-gcc -static -o jq.static [all object files] -L.libs -ljq -Lvendor/oniguruma/src/.libs -lonig
```

6. Installation: Replaced the dynamically linked binary with the statically linked one and installed it to /home/peter/result/bin/jq

7. Symlink creation: Created a symlink from /home/peter/result/jq to /home/peter/result/bin/jq

8. Verification: Confirmed that:
- The binary is statically linked (ldd shows "not a dynamic executable")
- It uses musl (confirmed by strings analysis)
- It has no glibc dependencies
- The jq binary works correctly
- All requested paths and symlinks are in place

The jq binary is now a fully statically linked executable that uses musl as its C standard library, meeting all the requirements specified in the request.

Task finished successfully, all checks passed!
Checks passed:
jq binary exists
jq is statically linked
jq binary appears to be linked with musl
jq works