CompileBench Attempt: jq-windows2, gpt-oss-120b-high, qxe40hr04zrac

<- Ranking

Summary

Task

jq-windows2

Performance

Cost	$0.035
Total elapsed time	22m1s
LLM inference time	39s
Command execution time	21m22s
Commands executed	24

All details >

Attempt ID	`qxe40hr04zrac`	Attempt group	run-16-09-22-05
Revision	`fb5c74bd2fee`	AWS Instance	m8i.2xlarge
Start time	2025-09-16T21:59:18.549Z	End time	2025-09-16T22:39:15.858Z
Task	jq-windows2	Environment	ubuntu-22.04-amd64-wine
Model	gpt-oss-120b-high	OpenRouter slug	`openai/gpt-oss-120b`
Temperature	1	Explicit prompt caching	false
User msg after tool call	false	Max tool calls	100
Total timeout seconds	2400	Single command timeout	1200
Cost	$0.035	Duration	22m1s
LLM inference time	39s	Command execution time	21m22s
Final context tokens	15,746	Total output tokens	4,698
Output reasoning tokens	3,662	Messages	51
Assistant messages	25	User messages	1
System messages	1	Commands executed	24

Download full attempt result JSON

Task

Task: jq-windows2

jq 1.8.1 is a command-line JSON utility for viewing and transforming JSON.
Project link: github.com/jqlang/jq

Task:
Compile and install jq to a specific location. Cross-compile to Windows. This task is a variant of jq-windows, without a hint to do a static build.

Difficulties:
Cross-compilation to Windows, setting up the cross-compilation toolchain (compilers, etc), making sure that there are no dynamic libraries.

Environment:
Ubuntu 22.04 on amd64, with internet access.

View task page

Execution log

SYSTEM

You are a package-building specialist operating a Ubuntu 22.04 bash shell via one tool: run_terminal_cmd.
The current working directory of every run_terminal_cmd is /home/peter.
Execution rules:
- Always pass non-interactive flags for any command that could prompt (e.g., -y, --yes, DEBIAN_FRONTEND=noninteractive).
- Don't include any newlines in the command.
- You can use sudo.
If you encounter any errors or issues while doing the user's request, you must fix them and continue the task.
At the end verify you did the user request correctly.

USER

You are given jq v1.8.1 source code at jq.tar.gz. Please compile the jq package for amd64 Windows and install it to /home/peter/result/jq.exe. Make sure it runs correctly via the installed wine.

ASSISTANT

Show reasoning

We need to compile jq source for Windows amd64 using cross-compilation? Possibly using mingw-w64. Need to install dependencies: mingw-w64, build-essential, etc. Then extract jq.tar.gz (provided? it's assumed present). Compile with appropriate flags: CC=x86_64-w64-mingw32-gcc etc. Then produce jq.exe, move to /home/peter/result/jq.exe. Then verify runs with wine: wine /home/peter/result/jq.exe --version.

We must ensure result directory exists.

Let's start: check if jq.tar.gz exists.

compile-bench> ls -l jq.tar.gz

-rw-r--r-- 1 peter peter 2026798 Sep 16 21:59 jq.tar.gz

ASSISTANT

Show reasoning

We have jq source tarball. Need to compile for Windows amd64 using cross-compilation (mingw-w64). Install wine to run. Steps:

1. Install build dependencies: gcc-mingw-w64, make, autoconf, libtool, etc. Also need libonig? jq uses oniguruma? Actually jq uses libonig and libjq? Let's check. We'll try to compile.

2. Extract tarball.

3. Configure with appropriate host: x86_64-w64-mingw32.

4. make.

5. The resulting binary likely named jq.exe.

6. Install to /home/peter/result/jq.exe (create directory).

7. Install wine (apt-get install wine64) to run.

8. Test running via wine: wine jq.exe --version.

Proceed.

compile-bench> sudo apt-get update -y

0% [Working]
            
Get:1 http://security.ubuntu.com/ubuntu jammy-security InRelease [129 kB]

0% [Waiting for headers] [1 InRelease 14.2 kB/129 kB 11%]
                                                         
Hit:2 http://archive.ubuntu.com/ubuntu jammy InRelease

0% [Waiting for headers] [1 InRelease 14.2 kB/129 kB 11%]
                                                         
Get:3 http://archive.ubuntu.com/ubuntu jammy-updates InRelease [128 kB]

0% [3 InRelease 14.2 kB/128 kB 11%] [1 InRelease 28.7 kB/129 kB 22%]
0% [3 InRelease 30.1 kB/128 kB 24%] [1 InRelease 77.9 kB/129 kB 60%]
                                                                    
0% [3 InRelease 46.0 kB/128 kB 36%]
                                   
0% [Working]
0% [Waiting for headers]
                        
Get:4 http://archive.ubuntu.com/ubuntu jammy-backports InRelease [127 kB]

0% [4 InRelease 5484 B/127 kB 4%] [Waiting for headers]
                                                       
Get:5 http://security.ubuntu.com/ubuntu jammy-security/multiverse amd64 Packages [80.3 kB]

0% [4 InRelease 63.4 kB/127 kB 50%] [5 Packages 7002 B/80.3 kB 9%]
                                                                  
0% [5 Packages 64.9 kB/80.3 kB 81%]
                                   
0% [Working]
0% [5 Packages store 0 B] [Waiting for headers]
0% [5 Packages store 127 kB] [Waiting for headers]
                                                  
0% [Waiting for headers]
                        
Get:6 http://security.ubuntu.com/ubuntu jammy-security/restricted amd64 Packages [5441 kB]

0% [Waiting for headers] [6 Packages 6999 B/5441 kB 0%]
                                                       
Get:7 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 Packages [3624 kB]

0% [7 Packages 6999 B/3624 kB 0%] [6 Packages 72.2 kB/5441 kB 1%]
22% [7 Packages 181 kB/3624 kB 5%] [6 Packages 217 kB/5441 kB 4%]
                                                                 
63% [6 Packages 4910 kB/5441 kB 90%]
63% [7 Packages store 0 B] [6 Packages 4910 kB/5441 kB 90%]
66% [7 Packages store 0 B] [Waiting for headers] [Waiting for headers]
                                                                      
Get:8 http://security.ubuntu.com/ubuntu jammy-security/main amd64 Packages [3311 kB]

66% [7 Packages store 0 B] [Waiting for headers] [8 Packages 20.5 kB/3311 kB 1%
                                                                               
83% [7 Packages store 0 B] [Waiting for headers] [Waiting for headers]
                                                                      
Get:9 http://security.ubuntu.com/ubuntu jammy-security/universe amd64 Packages [1274 kB]

83% [7 Packages store 0 B] [Waiting for headers] [9 Packages 33.0 kB/1274 kB 3%
                                                                               
Get:10 http://archive.ubuntu.com/ubuntu jammy-updates/universe amd64 Packages [1581 kB]

88% [7 Packages store 0 B] [10 Packages 9895 B/1581 kB 1%] [9 Packages 1050 kB/
                                                                               
92% [7 Packages store 0 B] [10 Packages 576 kB/1581 kB 36%]
                                                           
97% [7 Packages store 0 B]
                          
98% [Working]
98% [6 Packages store 0 B]
                          
98% [Working]
98% [8 Packages store 0 B]
                          
99% [Working]
99% [9 Packages store 0 B]
                          
99% [Working]
99% [10 Packages store 0 B]
                           
100% [Working]
              
Fetched 15.7 MB in 1s (19.1 MB/s)

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 3%

Reading package lists... 3%

Reading package lists... 4%

Reading package lists... 4%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 52%

Reading package lists... 52%

Reading package lists... 67%

Reading package lists... 67%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 81%

Reading package lists... 81%

Reading package lists... 96%

Reading package lists... 96%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... Done

↓ 13 lines

ASSISTANT

Show reasoning

We need to compile jq (v1.8.1) source for Windows amd64. We need build tools: mingw-w64, maybe also dependencies like oniguruma, libjq's own. Let's check source. We'll extract tar.

compile-bench> tar -xf jq.tar.gz

[empty output]

ASSISTANT

Show reasoning

We have extracted source. Need to compile jq for Windows amd64 using mingw-w64. Install dependencies: build-essential, autoconf, automake, libtool, pkg-config, wget? Also need on Ubuntu cross compile. Install mingw-w64 and maybe libonig? jq uses oniguruma? Let's check jq source. We'll list directory.

compile-bench> ls -R

.:
jq-1.8.1  jq.tar.gz

./jq-1.8.1:
AUTHORS      Makefile.in  config        jq.1           libjq.pc.in  tests
COPYING      NEWS.md      configure     jq.1.prebuilt  m4           vendor
ChangeLog    README.md    configure.ac  jq.spec        scripts
Makefile.am  aclocal.m4   docs          libjq.pc       src

./jq-1.8.1/config:
ar-lib   config.guess  depcomp     ltmain.sh  missing      ylwrap
compile  config.sub    install-sh  m4         test-driver

./jq-1.8.1/config/m4:
check-math-func.m4     find-func.m4  ltsugar.m4      misc.m4
find-func-no-libs.m4   libtool.m4    ltversion.m4
find-func-no-libs2.m4  ltoptions.m4  lt~obsolete.m4

./jq-1.8.1/docs:
Pipfile       build_manpage.py   content            templates
Pipfile.lock  build_mantests.py  manual_schema.yml  validate_manual_schema.py
README.md     build_website.py   public

./jq-1.8.1/docs/content:
download  index.yml  manual  tutorial

./jq-1.8.1/docs/content/download:
default.yml

./jq-1.8.1/docs/content/manual:
dev  manual.yml  v1.3  v1.4  v1.5  v1.6  v1.7  v1.8

./jq-1.8.1/docs/content/manual/dev:
manual.yml

./jq-1.8.1/docs/content/manual/v1.3:
manual.yml

./jq-1.8.1/docs/content/manual/v1.4:
manual.yml

./jq-1.8.1/docs/content/manual/v1.5:
manual.yml

./jq-1.8.1/docs/content/manual/v1.6:
manual.yml

./jq-1.8.1/docs/content/manual/v1.7:
manual.yml

./jq-1.8.1/docs/content/manual/v1.8:
manual.yml

./jq-1.8.1/docs/content/tutorial:
default.yml

./jq-1.8.1/docs/public:
CNAME  css  icon.png  icon.svg  jq.svg  js  robots.txt

./jq-1.8.1/docs/public/css:
style.css

./jq-1.8.1/docs/public/js:
manual-search.js

./jq-1.8.1/docs/templates:
default.html.j2  index.html.j2  manual.html.j2  shared

./jq-1.8.1/docs/templates/shared:
_footer.html.j2  _head.html.j2  _navbar.html.j2
[command output truncated]

./jq-1.8.1/tests/modules/syntaxerror:
syntaxerror.jq

./jq-1.8.1/tests/torture:
input0.json

./jq-1.8.1/vendor:
decNumber  oniguruma

./jq-1.8.1/vendor/decNumber:
decContext.c  decContext.h  decNumber.c  decNumber.h  decNumberLocal.h

./jq-1.8.1/vendor/oniguruma:
AUTHORS         README.md        doc                   oniguruma.pc.cmake.in
CMakeLists.txt  README_japanese  index.html            oniguruma.pc.in
COPYING         aclocal.m4       index_ja.html         sample
ChangeLog       cmake            install-sh            src
HISTORY         compile          ltmain.sh             test
INSTALL         config.guess     m4                    test-driver
Makefile.am     config.sub       make_win.bat          windows
Makefile.in     configure        missing
NEWS            configure.ac     onig-config.cmake.in
README          depcomp          onig-config.in

./jq-1.8.1/vendor/oniguruma/cmake:
Config.cmake.in

./jq-1.8.1/vendor/oniguruma/doc:
API           CALLOUTS.API.ja      FAQ     RE.ja               onig_syn_md.c
API.ja        CALLOUTS.BUILTIN     FAQ.ja  SYNTAX.md
CALLOUTS.API  CALLOUTS.BUILTIN.ja  RE      UNICODE_PROPERTIES

./jq-1.8.1/vendor/oniguruma/m4:
libtool.m4  ltoptions.m4  ltsugar.m4  ltversion.m4  lt~obsolete.m4

./jq-1.8.1/vendor/oniguruma/sample:
Makefile.am            callout.c  listcap.c  scan.c    user_property.c
Makefile.in            count.c    names.c    simple.c
bug_fix.c              echo.c     posix.c    sql.c
callback_each_match.c  encode.c   regset.c   syntax.c

./jq-1.8.1/vendor/oniguruma/src:
Makefile.am          iso8859_11.c  onigposix.h   sjis_prop.c
Makefile.in          iso8859_13.c  oniguruma.h   st.c
Makefile.windows     iso8859_14.c  regcomp.c     st.h
ascii.c              iso8859_15.c  regenc.c      unicode.c
big5.c               iso8859_16.c  regenc.h      unicode_egcb_data.c
config.h.cmake.in    iso8859_2.c   regerror.c    unicode_fold1_key.c
config.h.in          iso8859_3.c   regexec.c     unicode_fold2_key.c
config.h.win32       iso8859_4.c   regext.c      unicode_fold3_key.c
config.h.win64       iso8859_5.c   reggnu.c      unicode_fold_data.c
config.h.windows.in  iso8859_6.c   regint.h      unicode_property_data.c
cp1251.c             iso8859_7.c   regparse.c    unicode_property_data_posix.c
euc_jp.c             iso8859_8.c   regparse.h    unicode_unfold_key.c
euc_jp_prop.c        iso8859_9.c   regposerr.c   unicode_wb_data.c
euc_kr.c             koi8.c        regposix.c    utf16_be.c
euc_tw.c             koi8_r.c      regsyntax.c   utf16_le.c
gb18030.c            mktable.c     regtrav.c     utf32_be.c
iso8859_1.c          onig_init.c   regversion.c  utf32_le.c
iso8859_10.c         oniggnu.h     sjis.c        utf8.c

./jq-1.8.1/vendor/oniguruma/test:
CMakeLists.txt  test.sh         test_regset.c  testc.c
Makefile.am     test_back.c     test_syntax.c  testp.c
Makefile.in     test_options.c  test_utf8.c    testu.c

./jq-1.8.1/vendor/oniguruma/windows:
CMakeLists.txt  testc.c

↓ 141 lines

ASSISTANT

Show reasoning

We need to compile jq for amd64 Windows, output to /home/peter/result/jq.exe, and ensure it runs via wine.

We need to install necessary build tools: autoconf, automake, libtool, gcc/mingw-w64.

On Ubuntu, we can use mingw-w64 to cross-compile Windows binaries. For jq v1.8.1, we need to check configure script options. Typically you can do:

./configure --host=x86_64-w64-mingw32 --disable-maintainer-mode

But need to ensure that required packages: mingw-w64, yasm? maybe.

We also need to make result directory.

Steps:

1. Install build dependencies: build-essential, autoconf, automake, libtool, pkg-config, gettext, libonig-dev (but for Windows cross compile we need onig cross compiled? jq includes vendor/oniguruma; configure may use internal vendor onig if needed). But cross compilation may need to disable external libs and use vendor.

Simplify: Use make -f Makefile.mingw maybe. In vendor/oniguruma there's windows/Makefile? There's a "make_win.bat".

Better: use configure with --disable-all-static? Actually jq static linking? We'll try.

Let's attempt:

sudo apt-get install -y build-essential autoconf automake libtool pkg-config mingw-w64

Also maybe need zlib: but cross compile may need x86_64-w64-mingw32-zlib? apt has mingw-w64 libraries: mingw-w64 and libz-mingw-w64-dev maybe.

Let's install libz-mingw-w64-dev.

Proceed.

compile-bench> sudo apt-get install -y build-essential autoconf automake libtool pkg-config mingw-w64 libz-mingw-w64-dev

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 3%

Reading package lists... 3%

Reading package lists... 4%

Reading package lists... 4%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 52%

Reading package lists... 52%

Reading package lists... 67%

Reading package lists... 67%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 81%

Reading package lists... 81%

Reading package lists... 96%

Reading package lists... 96%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... Done


Building dependency tree... 0%

Building dependency tree... 0%

Building dependency tree... 50%

Building dependency tree... 50%

Building dependency tree... 58%

Building dependency tree... Done


Reading state information... 0% 

Reading state information... 0%

Reading state information... Done

build-essential is already the newest version (12.9ubuntu3).
The following additional packages will be installed:
  autotools-dev binutils-mingw-w64-i686 binutils-mingw-w64-x86-64
  g++-mingw-w64 g++-mingw-w64-i686 g++-mingw-w64-i686-posix
  g++-mingw-w64-i686-win32 g++-mingw-w64-x86-64 g++-mingw-w64-x86-64-posix
  g++-mingw-w64-x86-64-win32 gcc-mingw-w64 gcc-mingw-w64-base
  gcc-mingw-w64-i686 gcc-mingw-w64-i686-posix gcc-mingw-w64-i686-posix-runtime
  gcc-mingw-w64-i686-win32 gcc-mingw-w64-i686-win32-runtime
  gcc-mingw-w64-x86-64 gcc-mingw-w64-x86-64-posix
  gcc-mingw-w64-x86-64-posix-runtime gcc-mingw-w64-x86-64-win32
  gcc-mingw-w64-x86-64-win32-runtime libltdl-dev libsigsegv2 m4
  mingw-w64-common mingw-w64-i686-dev mingw-w64-x86-64-dev
Suggested packages:
  autoconf-archive gnu-standards autoconf-doc gettext gcc-10-locales
  libtool-doc gfortran | fortran95-compiler gcj-jdk m4-doc
The following NEW packages will be installed:
  autoconf automake autotools-dev binutils-mingw-w64-i686
  binutils-mingw-w64-x86-64 g++-mingw-w64 g++-mingw-w64-i686
  g++-mingw-w64-i686-posix g++-mingw-w64-i686-win32 g++-mingw-w64-x86-64
  g++-mingw-w64-x86-64-posix g++-mingw-w64-x86-64-win32 gcc-mingw-w64
  gcc-mingw-w64-base gcc-mingw-w64-i686 gcc-mingw-w64-i686-posix
  gcc-mingw-w64-i686-posix-runtime gcc-mingw-w64-i686-win32
  gcc-mingw-w64-i686-win32-runtime gcc-mingw-w64-x86-64
  gcc-mingw-w64-x86-64-posix gcc-mingw-w64-x86-64-posix-runtime
  gcc-mingw-w64-x86-64-win32 gcc-mingw-w64-x86-64-win32-runtime libltdl-dev
  libsigsegv2 libtool libz-mingw-w64-dev m4 mingw-w64 mingw-w64-common
  mingw-w64-i686-dev mingw-w64-x86-64-dev pkg-config
0 upgraded, 34 newly installed, 0 to remove and 0 not upgrad
[command output truncated]
/x86_64-w64-mingw32-gcc-posix to provide /usr/bin/x86_64-w64-mingw32-gcc (x86_64-w64-mingw32-gcc) in auto mode
Setting up gcc-mingw-w64-x86-64-win32 (10.3.0-14ubuntu1+24.3) ...
update-alternatives: using /usr/bin/x86_64-w64-mingw32-gcc-win32 to provide /usr/bin/x86_64-w64-mingw32-gcc (x86_64-w64-mingw32-gcc) in auto mode
Setting up gcc-mingw-w64-x86-64 (10.3.0-14ubuntu1+24.3) ...
update-alternatives: warning: forcing reinstallation of alternative /usr/bin/x86_64-w64-mingw32-gcc-win32 because link group x86_64-w64-mingw32-gcc is broken
update-alternatives: warning: skip creation of /usr/bin/x86_64-w64-mingw32-gcc-8 because associated file /usr/bin/x86_64-w64-mingw32-gcc-8.3-win32 (of link group x86_64-w64-mingw32-gcc) doesn't exist
Setting up autoconf (2.71-2) ...
Setting up mingw-w64-i686-dev (8.0.0-1) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/automake.1.gz because associated file /usr/share/man/man1/automake-1.16.1.gz (of link group automake) doesn't exist
update-alternatives: warning: skip creation of /usr/share/man/man1/aclocal.1.gz because associated file /usr/share/man/man1/aclocal-1.16.1.gz (of link group automake) doesn't exist
Setting up gcc-mingw-w64-i686-win32 (10.3.0-14ubuntu1+24.3) ...
update-alternatives: using /usr/bin/i686-w64-mingw32-gcc-win32 to provide /usr/bin/i686-w64-mingw32-gcc (i686-w64-mingw32-gcc) in auto mode
Setting up g++-mingw-w64-i686-win32 (10.3.0-14ubuntu1+24.3) ...
update-alternatives: using /usr/bin/i686-w64-mingw32-g++-win32 to provide /usr/bin/i686-w64-mingw32-g++ (i686-w64-mingw32-g++) in auto mode
Setting up g++-mingw-w64-x86-64-win32 (10.3.0-14ubuntu1+24.3) ...
update-alternatives: using /usr/bin/x86_64-w64-mingw32-g++-win32 to provide /usr/bin/x86_64-w64-mingw32-g++ (x86_64-w64-mingw32-g++) in auto mode
Setting up gcc-mingw-w64-i686-posix (10.3.0-14ubuntu1+24.3) ...
Setting up g++-mingw-w64-x86-64-posix (10.3.0-14ubuntu1+24.3) ...
Setting up gcc-mingw-w64-i686 (10.3.0-14ubuntu1+24.3) ...
update-alternatives: warning: forcing reinstallation of alternative /usr/bin/i686-w64-mingw32-gcc-win32 because link group i686-w64-mingw32-gcc is broken
update-alternatives: warning: skip creation of /usr/bin/i686-w64-mingw32-gcc-8 because associated file /usr/bin/i686-w64-mingw32-gcc-8.3-win32 (of link group i686-w64-mingw32-gcc) doesn't exist
Setting up libltdl-dev:amd64 (2.4.6-15build2) ...
Setting up g++-mingw-w64-x86-64 (10.3.0-14ubuntu1+24.3) ...
Setting up gcc-mingw-w64 (10.3.0-14ubuntu1+24.3) ...
Setting up g++-mingw-w64-i686-posix (10.3.0-14ubuntu1+24.3) ...
Setting up g++-mingw-w64-i686 (10.3.0-14ubuntu1+24.3) ...
Setting up g++-mingw-w64 (10.3.0-14ubuntu1+24.3) ...
Setting up mingw-w64 (8.0.0-1) ...
Processing triggers for libwine:amd64 (6.0.3~repack-1) ...
Processing triggers for libc-bin (2.35-0ubuntu3.10) ...

↓ 65 lines

ASSISTANT

Show reasoning

We need to compile jq for Windows amd64 using mingw-w64. The source likely uses autotools. Usually to cross compile we run ./configure --host=x86_64-w64-mingw32. Also need libtool, maybe need to set LDFLAGS for zlib. Already installed libz-mingw-w64-dev.

We'll create build directory, run autoreconf? The source includes configure script already (generated). So run:

cd jq-1.8.1
./configure --host=x86_64-w64-mingw32 --disable-static --enable-shared? Actually need executable, static is fine. Use --disable-dependency-tracking maybe.

Then make.

After compiled, we should have src/.libs/jq.exe? Usually compiled as jq.exe in src/. We'll find.

Then create destination folder /home/peter/result and copy jq.exe there.

Also need wine to run test: install wine and test jq.exe with a simple command like echo '{"a":1}' | wine jq.exe .? Actually jq expects input. Could test by running wine /home/peter/result/jq.exe -n '{foo:1}' which should output {"foo":1}. Use wine.

So need to install wine if not already; libwine installed earlier as part of triggers. Ensure wine is installed: apt-get install -y wine.

Let's install wine.

compile-bench> sudo apt-get install -y wine

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 3%

Reading package lists... 3%

Reading package lists... 4%

Reading package lists... 4%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 52%

Reading package lists... 52%

Reading package lists... 67%

Reading package lists... 67%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 81%

Reading package lists... 81%

Reading package lists... 96%

Reading package lists... 96%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... Done


Building dependency tree... 0%

Building dependency tree... 0%

Building dependency tree... 50%

Building dependency tree... 50%

Building dependency tree... 78%

Building dependency tree... Done


Reading state information... 0% 

Reading state information... 0%

Reading state information... Done

wine is already the newest version (6.0.3~repack-1).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

↓ 6 lines

ASSISTANT

Show reasoning

We need to compile jq for Windows amd64 using mingw-w64. Usually jq uses autoconf. Steps: cd jq-1.8.1, run ./configure with host=x86_64-w64-mingw32, maybe also --disable-maintainer-mode? Then make. Ensure we have libtool etc. Let's try.

compile-bench> cd jq-1.8.1 && ./configure --host=x86_64-w64-mingw32 --disable-maintainer-mode

checking for x86_64-w64-mingw32-gcc... x86_64-w64-mingw32-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.exe
checking for suffix of executables... .exe
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether x86_64-w64-mingw32-gcc accepts -g... yes
checking for x86_64-w64-mingw32-gcc option to enable C11 features... none needed
checking whether x86_64-w64-mingw32-gcc understands -c and -o together... yes
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for wchar.h... yes
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for x86_64-w64-mingw32-strip... x86_64-w64-mingw32-strip
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking whether make supports nested variables... yes
checking dependency style of x86_64-w64-mingw32-gcc... gcc3
checking whether make supports nested variables... (cached) yes
checking for x86_64-w64-mingw32-ar... x86_64-w64-mingw32-ar
checking the archiver (x86_64-w64-mingw32-ar) interface... ar
checking whether to enable maintainer-specific portions of Makefiles... no
checking for x86_64-w64-mingw32-gcc... (cached) x86_64-w64-mingw32-gcc
checking whether the compiler supports GNU C... (cached) yes
checking whether x86_64-w64-mingw32-gcc accepts -g... (cached) yes
checking for x86_64-w64-mingw32-gcc option to enable C11 features... (cached) none needed
checking whether x86_64-w64-mingw32-gcc understands -c and -o together... (cached) yes
checking how to run the C preprocessor... x86_64-w64-mingw32-gcc -E
checking for bison... no
checking for byacc... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-w64-mingw32
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by x86_64-w64-mingw32-gcc... /usr/bin/x86_64-w64-mingw32-ld
checking if the linker (/usr/bin/x86_64-w64-mingw32-ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/x86_64-w64-mingw32-nm -B
checking the name lister (/usr/bin/x86_64-w64-mingw32-nm -B) interface... BSD n
[command output truncated]
dump... x86_64-w64-mingw32-objdump
checking how to recognize dependent libraries... file_magic ^x86 archive import|^x86 DLL
checking for x86_64-w64-mingw32-dlltool... x86_64-w64-mingw32-dlltool
checking how to associate runtime and link libraries... func_cygming_dll_for_implib
checking for x86_64-w64-mingw32-ar... x86_64-w64-mingw32-ar
checking for archiver @FILE support... @
checking for x86_64-w64-mingw32-strip... (cached) x86_64-w64-mingw32-strip
checking for x86_64-w64-mingw32-ranlib... x86_64-w64-mingw32-ranlib
checking command to parse /usr/bin/x86_64-w64-mingw32-nm -B output from x86_64-w64-mingw32-gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for x86_64-w64-mingw32-mt... no
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... no
checking for objdir... .libs
checking if x86_64-w64-mingw32-gcc supports -fno-rtti -fno-exceptions... no
checking for x86_64-w64-mingw32-gcc option to produce PIC... -DDLL_EXPORT -DPIC
checking if x86_64-w64-mingw32-gcc PIC flag -DDLL_EXPORT -DPIC works... yes
checking if x86_64-w64-mingw32-gcc static flag -static works... yes
checking if x86_64-w64-mingw32-gcc supports -c -o file.o... yes
checking if x86_64-w64-mingw32-gcc supports -c -o file.o... (cached) yes
checking whether the x86_64-w64-mingw32-gcc linker (/usr/bin/x86_64-w64-mingw32-ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... yes
checking dynamic linker characteristics... Win32 ld.exe
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking whether make sets $(MAKE)... (cached) yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking for sys/times.h... no
checking size of int... 4
checking size of long... 4
checking size of long long... 8
checking size of void*... 8
checking for size_t... yes
checking for working alloca.h... no
checking for alloca... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating test/Makefile
config.status: creating sample/Makefile
config.status: creating onig-config
config.status: creating src/config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default commands

↓ 120 lines

ASSISTANT

Show reasoning

Now need to compile. Use make. Then locate resulting jq.exe. Then copy to /home/peter/result/jq.exe. Ensure result directory exists. Then test with wine: e.g., echo '{"a":1}' | wine jq.exe . Should output something. Let's compile.

compile-bench> cd jq-1.8.1 && make -j$(nproc)

mkdir -p src
mkdir -p src
  GEN      src/builtin.inc
  GEN      src/config_opts.inc
mkdir -p src
  GEN      src/version.h
make  all-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making all in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making all in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make  all-am
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c -o regparse.lo regparse.c
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c -o regcomp.lo regcomp.c
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c -o regexec.lo regexec.c
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c -o regenc.lo regenc.c
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c -o regerror.lo regerror.c
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regext.lo -MD -MP -MF .deps/regext.Tpo -c -o regext.lo regext.c
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c -o regsyntax.lo regsyntax.c
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regtrav.lo -MD -MP -MF .deps/regtrav.Tpo -c -o regtrav.lo regtrav.c
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c regcomp.c  -DDLL_EXPORT -DPIC -o .libs/regcomp.o
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c regsyntax.c  -DDLL_EXPORT -DPIC -o .libs/regsyntax.o
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c regparse.c  -DDLL_EXPORT -DPIC -o .libs/regparse.o
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regext.lo -MD -MP -MF .deps/regext.Tpo -c regext.c  -DDLL_EXPORT -DPIC -o .libs/regext.o
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c regenc.c  -DDLL_EXPORT -DPIC -o .libs/regenc.o
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regtrav.lo -MD -MP -MF .deps/regtrav.Tpo -c r
[command output truncated]
-auto-image-base -Xlinker --out-implib -Xlinker .libs/libonig.dll.a
libtool: link: x86_64-w64-mingw32-ar cr .libs/libonig.a  regparse.o regcomp.o regexec.o regenc.o regerror.o regext.o regsyntax.o regtrav.o regversion.o st.o reggnu.o unicode.o unicode_unfold_key.o unicode_fold1_key.o unicode_fold2_key.o unicode_fold3_key.o ascii.o utf8.o utf16_be.o utf16_le.o utf32_be.o utf32_le.o euc_jp.o euc_jp_prop.o sjis.o sjis_prop.o iso8859_1.o iso8859_2.o iso8859_3.o iso8859_4.o iso8859_5.o iso8859_6.o iso8859_7.o iso8859_8.o iso8859_9.o iso8859_10.o iso8859_11.o iso8859_13.o iso8859_14.o iso8859_15.o iso8859_16.o euc_tw.o euc_kr.o big5.o gb18030.o koi8_r.o cp1251.o onig_init.o
libtool: link: x86_64-w64-mingw32-ranlib .libs/libonig.a
libtool: link: ( cd ".libs" && rm -f "libonig.la" && ln -s "../libonig.la" "libonig.la" )
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making all in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making all in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
sed -e 's,[@]datadir[@],/usr/local/share,g' -e 's,[@]datarootdir[@],/usr/local/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/usr/local,g' -e 's,[@]exec_prefix[@],/usr/local,g' -e 's,[@]libdir[@],/usr/local/lib,g' -e 's,[@]includedir[@],/usr/local/include,g' < ./oniguruma.pc.in > oniguruma.pc
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
  CC       src/builtin.lo
  CC       src/bytecode.lo
  CC       src/compile.lo
  CC       src/execute.lo
  CC       src/jq_test.lo
  CC       src/jv.lo
  CC       src/jv_alloc.lo
  CC       src/jv_aux.lo
  CC       src/jv_dtoa.lo
  CC       src/jv_file.lo
  CC       src/jv_parse.lo
  CC       src/jv_print.lo
  CC       src/jv_unicode.lo
  CC       src/linker.lo
  CC       src/locfile.lo
  CC       src/util.lo
  CC       src/jv_dtoa_tsd.lo
  CC       vendor/decNumber/decContext.lo
  CC       vendor/decNumber/decNumber.lo
  CC       src/lexer.lo
  CC       src/parser.lo
mkdir -p src
  GEN      src/version.h
  CC       src/main.o
src/main.c:21:1: warning: function declaration isn't a prototype [ttps://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wstrict-prototypes-Wstrict-prototypes]8;;]
   21 | extern void jv_tsd_dtoa_ctx_init();
      | ^~~~~~
  CCLD     libjq.la
  CCLD     jq.exe
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'

↓ 80 lines

ASSISTANT

Show reasoning

The build succeeded; jq.exe should be produced in the top directory. Let's verify its existence.

compile-bench> ls -l jq-1.8.1/jq.exe

-rwxr-xr-x 1 peter peter 58880 Sep 16 22:00 jq-1.8.1/jq.exe

ASSISTANT

Show reasoning

We have compiled jq.exe. Need to install it to /home/peter/result/jq.exe. Ensure directory exists. Then test via wine. Let's create directory and copy.

compile-bench> mkdir -p /home/peter/result && cp jq-1.8.1/jq.exe /home/peter/result/jq.exe

[empty output]

ASSISTANT

Show reasoning

We need to verify that jq.exe runs correctly via wine. Let's test running a simple jq command: echo '{"a":1}' | jq '.' . Use wine to run the exe. Need to ensure wine works. We'll run: echo '{"a":1}' | wine /home/peter/result/jq.exe '.' . Use wine with proper path. Let's test.

compile-bench> echo '{"a":1}' | wine /home/peter/result/jq.exe '.'

it looks like wine32 is missing, you should install it.
multiarch needs to be enabled first.  as root, please
execute "dpkg --add-architecture i386 && apt-get update &&
apt-get install wine32"
0048:err:explorer:initialize_display_settings Failed to query current display settings for L"\\\\.\\DISPLAY1".

↓ 6 lines

ASSISTANT

Show reasoning

We need to install wine32 and enable i386 architecture. Let's run dpkg add-architecture i386, apt-get update, install wine32. Then test again.

compile-bench> sudo dpkg --add-architecture i386 && sudo apt-get update -y && sudo apt-get install -y wine32

0% [Working]
            
Hit:1 http://security.ubuntu.com/ubuntu jammy-security InRelease

0% [Connecting to archive.ubuntu.com (185.125.190.81)]
                                                      
0% [Waiting for headers]
                        
Hit:2 http://archive.ubuntu.com/ubuntu jammy InRelease

0% [Waiting for headers]
                        
Get:3 http://security.ubuntu.com/ubuntu jammy-security/main i386 Packages [863 kB]

0% [Waiting for headers] [3 Packages 12.8 kB/863 kB 1%]
                                                       
Get:4 http://archive.ubuntu.com/ubuntu jammy-updates InRelease [128 kB]

0% [4 InRelease 14.2 kB/128 kB 11%] [3 Packages 15.7 kB/863 kB 2%]
0% [4 InRelease 14.2 kB/128 kB 11%] [3 Packages 24.4 kB/863 kB 3%]
                                                                  
0% [4 InRelease 53.3 kB/128 kB 42%]
0% [3 Packages store 0 B] [4 InRelease 53.3 kB/128 kB 42%]
                                                          
Get:5 http://security.ubuntu.com/ubuntu jammy-security/multiverse i386 Packages [9058 B]

0% [3 Packages store 1408 kB] [4 InRelease 64.9 kB/128 kB 51%] [5 Packages 9058
                                                                               
0% [4 InRelease 64.9 kB/128 kB 51%] [5 Packages 9058 B/9058 B 100%]
                                                                   
Get:6 http://security.ubuntu.com/ubuntu jammy-security/universe i386 Packages [839 kB]

                                                                   
0% [4 InRelease 67.7 kB/128 kB 53%] [6 Packages 110 kB/839 kB 13%]
0% [5 Packages store 0 B] [4 InRelease 67.7 kB/128 kB 53%] [6 Packages 147 kB/8
                                                                               
0% [4 InRelease 95.3 kB/128 kB 74%] [6 Packages 307 kB/839 kB 37%]
                                                                  
Get:7 http://security.ubuntu.com/ubuntu jammy-security/restricted i386 Packages [51.9 kB]

                                                                  
0% [Waiting for headers] [7 Packages 51.9 kB/51.9 kB 100%]
0% [6 Packages store 0 B] [Waiting for headers] [7 Packages 51.9 kB/51.9 kB 100
                                                                               
0% [6 Packages store 0 B] [Waiting for headers]
                                               
0% [Waiting for headers]
0% [7 Packages store 0 B] [Waiting for headers]
                                               
0% [Waiting for headers]
0% [Waiting for headers]
                        
Get:8 http://archive.ubuntu.com/ubuntu jammy-backports InRelease [127 kB]

0% [8 InRelease 2588 B/127 kB 2%]
                                 
0% [Working]
22% [Waiting for headers]
                         
Get:9 http://archive.ubuntu.com/ubuntu jammy/universe i386 Packages [9385 kB]

22% [9 Packages 2655 B/9385 kB 0%]
44% [9 Packages 6695 kB/9385 kB 71%]
                                    
53% [Waiting for headers]
              
[command output truncated]
Setting up libcairo2:i386 (1.16.0-5ubuntu2) ...
Setting up libxxf86vm1:i386 (1:1.1.4-1build3) ...
Setting up libv4l-0:i386 (1.22.1-2build1) ...
Setting up libgnutls30:i386 (3.7.3-4ubuntu1.7) ...
Setting up libxfixes3:i386 (1:6.0.0-1) ...
Setting up librtmp1:i386 (2.4+20151223.gitfa8646d.1-2build4) ...
Setting up libxinerama1:i386 (2:1.1.4-3) ...
Setting up libgd3:i386 (2.3.0-2ubuntu2.3) ...
Setting up libxv1:i386 (2:1.0.11-1build2) ...
Setting up libxrandr2:i386 (2:1.5.2-1build1) ...
Setting up libcups2:i386 (2.4.1op1-1ubuntu4.12) ...
Setting up libllvm15:i386 (1:15.0.7-0ubuntu0.22.04.3) ...
Setting up libtheora0:i386 (1.1.1+dfsg.1-15ubuntu4) ...
Setting up libnsl2:i386 (1.3.0-2build2) ...
Setting up libxslt1.1:i386 (1.1.34-4ubuntu0.22.04.4) ...
Setting up libxss1:i386 (1:1.2.3-1build2) ...
Setting up libosmesa6:i386 (23.2.1-1ubuntu3.1~22.04.3) ...
Setting up mesa-vulkan-drivers:i386 (23.2.1-1ubuntu3.1~22.04.3) ...
Setting up libasound2-plugins:i386 (1.2.6-1) ...
Setting up libxi6:i386 (2:1.8-1build1) ...
Setting up libxcursor1:i386 (1:1.2.0-2build4) ...
Setting up libgl1-mesa-dri:i386 (23.2.1-1ubuntu3.1~22.04.3) ...
Setting up libnss-nisplus:i386 (1.3-0ubuntu6) ...
Setting up libldap-2.5-0:i386 (2.5.19+dfsg-0ubuntu0.22.04.1) ...
Setting up libnss-nis:i386 (3.1-0ubuntu6) ...
Setting up libshout3:i386 (2.4.5-1build3) ...
Setting up libcurl4:i386 (7.81.0-1ubuntu1.20) ...
Setting up libsdl2-2.0-0:i386 (2.0.20+dfsg-2ubuntu1.22.04.1) ...
Setting up libglx-mesa0:i386 (23.2.1-1ubuntu3.1~22.04.3) ...
Setting up libglx0:i386 (1.4.0-1) ...
Setting up libgphoto2-6:i386 (2.5.27-1build2) ...
Setting up libgl1:i386 (1.4.0-1) ...
Setting up libfaudio0:i386 (22.02-1) ...
Processing triggers for libglib2.0-0:amd64 (2.72.4-0ubuntu2.6) ...
Processing triggers for libc-bin (2.35-0ubuntu3.10) ...
Setting up libharfbuzz0b:i386 (2.7.4-1ubuntu3.2) ...
Setting up libgdk-pixbuf-2.0-0:i386 (2.42.8+dfsg-1ubuntu0.4) ...
Setting up libcairo-gobject2:i386 (1.16.0-5ubuntu2) ...
Setting up glib-networking:i386 (2.72.0-1) ...
Setting up libgudev-1.0-0:i386 (1:237-2build1) ...
Setting up libgstreamer1.0-0:i386 (1.20.3-0ubuntu1.1) ...
Setcap worked! gst-ptp-helper is not suid!
Setting up libsoup2.4-1:i386 (2.74.2-3ubuntu0.6) ...
Setting up libpango-1.0-0:i386 (1.50.6+ds-2ubuntu1) ...
Setting up libgstreamer-plugins-base1.0-0:i386 (1.20.1-1ubuntu0.5) ...
Setting up libgstreamer-plugins-good1.0-0:i386 (1.20.3-0ubuntu1.4) ...
Setting up gstreamer1.0-plugins-base:i386 (1.20.1-1ubuntu0.5) ...
Setting up libwine:i386 (6.0.3~repack-1) ...
Setting up libpangoft2-1.0-0:i386 (1.50.6+ds-2ubuntu1) ...
Setting up libpangocairo-1.0-0:i386 (1.50.6+ds-2ubuntu1) ...
Setting up gstreamer1.0-x:i386 (1.20.1-1ubuntu0.5) ...
Setting up gstreamer1.0-plugins-good:i386 (1.20.3-0ubuntu1.4) ...
Setting up wine32:i386 (6.0.3~repack-1) ...
Setting up libdecor-0-plugin-1-cairo:i386 (0.1.0-3build1) ...
Processing triggers for libc-bin (2.35-0ubuntu3.10) ...

↓ 67 lines

ASSISTANT

Show reasoning

Now we have wine32 installed. Need to test jq.exe again.

compile-bench> echo '{"a":1}' | wine /home/peter/result/jq.exe '.'

0050:err:explorer:initialize_display_settings Failed to query current display settings for L"\\\\.\\DISPLAY1".

ASSISTANT

Show reasoning

The wine error about display settings may be okay; but we need to verify jq runs correctly. Perhaps we need to set WINEDEBUG or use wineconsole? Usually jq works without GUI. The error may be harmless but still output missing. It didn't output JSON. Maybe jq expects stdin but wine may need to use wineconsole? Let's try using wine64? Actually we compiled 64-bit exe, wine should run it. The error about explorer may be due to missing wine-mono? But still should output. Let's try running with wineconsole -c? Use wine /path/jq.exe . maybe need to pass arguments after exe: wine /path/jq.exe '.' . Already did. No output. Maybe jq.exe expects Windows console and wine's default is not providing? Use wine cmd /c? Actually we can run: wine cmd /c "jq.exe .". But need to be in directory. Let's try: wine cmd /c "jq.exe .". Need to set working directory. Use wine cmd /c "cd C:\\home\\peter\\result && jq.exe .". But path translation: wine maps /home/peter to Z:\home\peter. So we can run: wine cmd /c "Z:\\home\\peter\\result\\jq.exe .". Let's test.

compile-bench> wine cmd /c "Z:\\home\\peter\\result\\jq.exe ." < <(echo '{"a":1}')

0048:err:explorer:initialize_display_settings Failed to query current display settings for L"\\\\.\\DISPLAY1".
jq.exe.:./.libs/lt-jq.c:236:FATAL:couldn'tfindZ:\home\peter\result\jq.exe .
.

↓ 3 lines

ASSISTANT

Show reasoning

The wine command failing due to display settings. Perhaps need to set wine to use a virtual desktop. Use environment variable WINEDEBUG? Actually we can run with "wine64"? The error about explorer display settings may be harmless; but jq should still output. However it's failing to find the file? The command syntax wrong.

Simplify: run "wine /home/peter/result/jq.exe '.'" and feed JSON via stdin. Use echo pipe. The earlier attempt gave display error but maybe still output? It didn't output JSON. Could be that jq expects Windows console and wine's console not working. Use "wineconsole --backend=curses". Let's try.

compile-bench> wineconsole --backend=curses /home/peter/result/jq.exe '.' < <(echo '{"a":1}')

0048:err:explorer:initialize_display_settings Failed to query current display settings for L"\\\\.\\DISPLAY1".
00f4:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
00f4:err:winediag:nodrv_CreateWindow Make sure that your X server is running and that $DISPLAY is set correctly.

↓ 4 lines

ASSISTANT

Show reasoning

The issue: Running jq.exe in wine fails due to missing display (needs X). For command-line tools, we can use wine with "wineconsole" which may need DISPLAY; but we can set wine to use 'wine64' but still needs X. However we can use 'wine' with 'wine64' and set environment variable WINEDEBUG. Actually we can use 'wine' with 'wine64' to run command line if no GUI? It still tries to initialize explorer (maybe due to default). There is a way: use 'wine' with -no-gui? Not sure.

Maybe we can use "wine" with "wine64" and set "export WINEDEBUG=+all"? Not solve.

Alternative approach: Instead of using wine to test, we can use "file" to check it's a PE executable and maybe run it with "wine" using "wine" with "wineboot"? Might be fine.

But the user requested to ensure it runs correctly via the installed wine. Need to demonstrate that jq works, perhaps by using "wineconsole" with "winepath"? Could use "wine" with "wineconsole" but need X server. In headless environment, we can set "xvfb-run" to provide virtual X. Use xvfb-run -a wine ... That creates a virtual frame buffer.

Let's install xvfb and then run with xvfb-run.

compile-bench> sudo apt-get install -y xvfb

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 2%

Reading package lists... 2%

Reading package lists... 5%

Reading package lists... 5%

Reading package lists... 5%

Reading package lists... 5%

Reading package lists... 5%

Reading package lists... 5%

Reading package lists... 33%

Reading package lists... 33%

Reading package lists... 48%

Reading package lists... 48%

Reading package lists... 48%

Reading package lists... 48%

Reading package lists... 49%

Reading package lists... 49%

Reading package lists... 56%

Reading package lists... 56%

Reading package lists... 58%

Reading package lists... 58%

Reading package lists... 69%

Reading package lists... 69%

Reading package lists... 69%

Reading package lists... 69%

Reading package lists... 72%

Reading package lists... 73%

Reading package lists... 73%

Reading package lists... 75%

Reading package lists... 75%

Reading package lists... 75%

Reading package lists... 75%

Reading package lists... 75%

Reading package lists... 75%

Reading package lists... 75%

Reading package lists... 75%

Reading package lists... 75%

Reading package lists... 75%

Reading package lists... 75%

Reading package lists... 75%

Reading package lists... 75%

Reading package lists... 75%

Reading package lists... 82%

Reading package lists... 82%

Reading package lists... 83%

Reading package lists... 83%

Reading package lists... 95%

Reading package lists... 95%

Reading package lists... 95%

Reading package lists... 95%

Reading package lists... 97%

Reading package lists... 97%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... Done


Building dependency tree... 0%

Building dependency tree... 0%

Building dependency tree... 50%

Building dependency tree... 50%

Building dependency tree... Done


Reading state information... 0% 

Reading state information... 0%

Reading state information... Done

The following additional packages will be installed:
  libfontenc1 libice6 libsm6 libxaw7 libxfont2 libxkbfile1 libxmu6 libxmuu1
  libxt6 x11-xkb-utils xauth xfonts-base xfonts-encodings xfonts-utils
  xserver-common
The following NEW packages will be installed:
  libfontenc1 libice6 libsm6 libxaw7 libxfont2 libxkbfile1 libxmu6 libxmuu1
  libxt6 x11-xkb-utils xauth xfonts-base xfonts-encodings xfonts-utils
  xserver-common xvfb
0 upgraded, 16 newly installed, 0 to remove and 3 not upgraded.
Need to get 8332 kB of archives.
After this operation, 13.4 MB of additional disk space will be used.

0% [Working]
            
Get:1 http://archive.ubuntu.com/ubuntu jammy/main amd64 libxmuu1 amd64 2:1.1.3-3 [10.2 kB]

0% [1 libxmuu1 10.2 kB/10.2 kB 100%]
                                    
1% [Working]
            
Get:2 http://archive.ubuntu.com/ubuntu jammy/main amd64 xauth amd64 1:1.1-1buil
[command output truncated]
0-1build2_amd64.deb ...
Unpacking libice6:amd64 (2:1.0.10-1build2) ...
Selecting previously unselected package libsm6:amd64.
Preparing to unpack .../04-libsm6_2%3a1.2.3-1build2_amd64.deb ...
Unpacking libsm6:amd64 (2:1.2.3-1build2) ...
Selecting previously unselected package libxt6:amd64.
Preparing to unpack .../05-libxt6_1%3a1.2.1-1_amd64.deb ...
Unpacking libxt6:amd64 (1:1.2.1-1) ...
Selecting previously unselected package libxmu6:amd64.
Preparing to unpack .../06-libxmu6_2%3a1.1.3-3_amd64.deb ...
Unpacking libxmu6:amd64 (2:1.1.3-3) ...
Selecting previously unselected package libxaw7:amd64.
Preparing to unpack .../07-libxaw7_2%3a1.0.14-1_amd64.deb ...
Unpacking libxaw7:amd64 (2:1.0.14-1) ...
Selecting previously unselected package libxfont2:amd64.
Preparing to unpack .../08-libxfont2_1%3a2.0.5-1build1_amd64.deb ...
Unpacking libxfont2:amd64 (1:2.0.5-1build1) ...
Selecting previously unselected package libxkbfile1:amd64.
Preparing to unpack .../09-libxkbfile1_1%3a1.1.0-1build3_amd64.deb ...
Unpacking libxkbfile1:amd64 (1:1.1.0-1build3) ...
Selecting previously unselected package x11-xkb-utils.
Preparing to unpack .../10-x11-xkb-utils_7.7+5build4_amd64.deb ...
Unpacking x11-xkb-utils (7.7+5build4) ...
Selecting previously unselected package xfonts-encodings.
Preparing to unpack .../11-xfonts-encodings_1%3a1.0.5-0ubuntu2_all.deb ...
Unpacking xfonts-encodings (1:1.0.5-0ubuntu2) ...
Selecting previously unselected package xfonts-utils.
Preparing to unpack .../12-xfonts-utils_1%3a7.7+6build2_amd64.deb ...
Unpacking xfonts-utils (1:7.7+6build2) ...
Selecting previously unselected package xfonts-base.
Preparing to unpack .../13-xfonts-base_1%3a1.0.5_all.deb ...
Unpacking xfonts-base (1:1.0.5) ...
Selecting previously unselected package xserver-common.
Preparing to unpack .../14-xserver-common_2%3a21.1.4-2ubuntu1.7~22.04.15_all.deb ...
Unpacking xserver-common (2:21.1.4-2ubuntu1.7~22.04.15) ...
Selecting previously unselected package xvfb.
Preparing to unpack .../15-xvfb_2%3a21.1.4-2ubuntu1.7~22.04.15_amd64.deb ...
Unpacking xvfb (2:21.1.4-2ubuntu1.7~22.04.15) ...
Setting up libice6:amd64 (2:1.0.10-1build2) ...
Setting up libfontenc1:amd64 (1:1.1.4-1build3) ...
Setting up xfonts-encodings (1:1.0.5-0ubuntu2) ...
Setting up libxkbfile1:amd64 (1:1.1.0-1build3) ...
Setting up libsm6:amd64 (2:1.2.3-1build2) ...
Setting up libxfont2:amd64 (1:2.0.5-1build1) ...
Setting up libxmuu1:amd64 (2:1.1.3-3) ...
Setting up xfonts-utils (1:7.7+6build2) ...
Setting up xfonts-base (1:1.0.5) ...
Setting up libxt6:amd64 (1:1.2.1-1) ...
Setting up xauth (1:1.1-1build2) ...
Setting up libxmu6:amd64 (2:1.1.3-3) ...
Setting up libxaw7:amd64 (2:1.0.14-1) ...
Setting up x11-xkb-utils (7.7+5build4) ...
Setting up xserver-common (2:21.1.4-2ubuntu1.7~22.04.15) ...
Setting up xvfb (2:21.1.4-2ubuntu1.7~22.04.15) ...
Processing triggers for fontconfig (2.13.1-4.2ubuntu5) ...
Processing triggers for libc-bin (2.35-0ubuntu3.10) ...

↓ 74 lines

ASSISTANT

Show reasoning

Now we have xvfb installed. Need to run jq.exe under wine with a virtual display. Use xvfb-run. Let's try:

xvfb-run -a wine /home/peter/result/jq.exe '.' with input.

We need to feed JSON. Use echo pipe.

Let's test.

compile-bench> xvfb-run -a wine /home/peter/result/jq.exe '.' < <(echo '{"a":1}')

X connection to :99 broken (explicit kill or server shutdown).

ASSISTANT

Show reasoning

We need to run jq.exe with wine. The error about display suggests need to use wine with no GUI. jq is a console app, but wine expects a console. Use wineconsole -c maybe. Let's try: wineconsole -c /home/peter/result/jq.exe '.' . Use echo pipe. Use xvfb-run maybe not needed. Try: wineconsole -c /home/peter/result/jq.exe '.' <<< '{"a":1}'.

compile-bench> wineconsole -c /home/peter/result/jq.exe '.' <<< '{"a":1}'

XIO:  fatal IO error 2 (No such file or directory) on X server ":99"

      after 121 requests (117 known processed) with 0 events remaining.

0050:err:explorer:initialize_display_settings Failed to query current display settings for L"\\\\.\\DISPLAY1".
00f8:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
00f8:err:winediag:nodrv_CreateWindow Make sure that your X server is running and that $DISPLAY is set correctly.

↓ 6 lines

ASSISTANT

Show reasoning

We need to run jq.exe via wine in a headless environment. Wine requires an X server; xvfb provides one. Use xvfb-run to execute. The earlier xvfb-run command didn't work because we passed input redirection incorrectly. Need to use proper quoting: echo ... | xvfb-run -a wine /home/peter/result/jq.exe '.' . The '.' is argument to jq, and we need to feed JSON via stdin. Let's try: echo '{"a":1}' | xvfb-run -a wine /home/peter/result/jq.exe '.' .

compile-bench> echo '{"a":1}' | xvfb-run -a wine /home/peter/result/jq.exe '.'

X connection to :99 broken (explicit kill or server shutdown).

ASSISTANT

Show reasoning

The goal: compile jq v1.8.1 for Windows amd64, produce jq.exe at /home/peter/result/jq.exe, and ensure it runs correctly via wine. We compiled successfully, but running fails due to missing display (wine attempts GUI). Usually jq is a console program; wine should run without X server. However errors appear because wine's explorer tries to initialize. We can run with wine -i or wine --headless? Actually we can use wine64 maybe? But we compiled 64-bit exe using mingw-w64. Running with wine (the 64-bit wine) should not need X? But wine still tries to load explorer (graphical). Usually running console apps works fine under wine without X, as they don't need display. But errors about DISPLAY indicate wine expects X. We installed xvfb but still failing. Perhaps we need to set environment variable WINEDEBUG=-all to suppress? Yet still need X for explorer maybe. Another approach: use winetricks to install 'corefonts' maybe not required. But maybe we should run with wineconsole (which provides console). wineconsole -c ... but still tries X.

Actually wineconsole uses a console window but still requires X to render. Using xvfb-run should work: xvfb-run wine /path/jq.exe ... but our earlier attempt gave X connection broken after start. Maybe need to add -e (no-exit?), or use --no-cursor? Let's test directly running with xvfb-run -a wine /path/jq.exe -c. Let's try: xvfb-run -a wine /home/peter/result/jq.exe -c '.'? Actually jq usage: jq program filter [files]. So command: jq.exe . (filter) reads from stdin. Use echo pipe.

We'll try: xvfb-run -a wine /home/peter/result/jq.exe '.' <<< '{"a":1}'. Let's test.

compile-bench> xvfb-run -a wine /home/peter/result/jq.exe '.' <<< '{"a":1}'

X connection to :99 broken (explicit kill or server shutdown).

X connection to :99 broken (explicit kill or server shutdown).

↓ 3 lines

ASSISTANT

Show reasoning

We need to run jq.exe via wine without needing X display. Perhaps use wine with "wine64" and set WINEDEBUG? Actually jq is a console program; wine should not need X if using wineconsole. The errors about explorer indicate wine tries to start explorer. Use wineconsole -c to run console program. But earlier wineconsole gave X errors because DISPLAY not set. We can set DISPLAY to dummy using xvfb-run. Use xvfb-run -a wineconsole -c /home/peter/result/jq.exe '.' . Let's try.

compile-bench> xvfb-run -a wineconsole -c /home/peter/result/jq.exe '.' <<< '{"a":1}'

Command timed out after 1200.0 seconds

ASSISTANT

Show reasoning

The attempts to run jq.exe via wine produce display errors. However, jq is a console app; we might not need GUI. Maybe we need to use wine's console mode: wine works for console but still tries to initialize explorer. Perhaps need to set WINEDEBUG=-all? Or use "wine64"? But jq.exe is 64-bit? It was compiled with x86_64-w64-mingw32, so it's a 64-bit Windows binary, requiring wine64. The command "wine" should handle both. The errors about explorer maybe can be suppressed but output still should work.

We saw no output; maybe jq.exe expects input from stdin but not reading? Use -c flag? Actually jq.exe expects filter argument and reads from stdin. The command we used: wine jq.exe '.' should read from stdin. The errors maybe printed but no output? The X errors may abort.

We could run with "wine64" explicitly. Try: xvfb-run -a wine64 /home/peter/result/jq.exe '.' <<< '{"a":1}'.

compile-bench> xvfb-run -a wine64 /home/peter/result/jq.exe '.' <<< '{"a":1}'

[empty output]

ASSISTANT

Show reasoning

We need to run jq.exe via wine. The errors about display indicate wine expects X server. Using xvfb-run should work, but we got broken connection. Possibly because jq.exe is a console app, not needing GUI. Use wineconsole -c maybe. But earlier attempts failed due to missing DISPLAY. xvfb-run should set DISPLAY. However maybe wine tries to use wine64 vs wine? The binary is 32-bit? It's built as 64-bit? Using x86_64-w64-mingw32, so 64-bit exe. Use wine64. Let's try: xvfb-run -a wine64 /home/peter/result/jq.exe '.' <<< '{"a":1}'. Use proper quoting.

compile-bench> xvfb-run -a wine64 /home/peter/result/jq.exe '.' <<< '{"a":1}'

[empty output]

ASSISTANT

Show reasoning

The issue: jq.exe compiled for Windows expects a console but wine is trying to use GUI/Explorer. We might need to run with wine with -b? Actually wine console apps still need a display, but can run with wine64? We can use wine with -i? Let's recall: For console programs, wine runs fine without X. However errors about explorer indicate maybe it tries to use Windows GUI? Possibly because jq uses isatty etc? But typical usage works.

Maybe the problem is that wine cannot find C:\\windows\\system32\\cmd.exe? Actually not. The errors about explorer are about display settings; but still output should print.

We saw earlier when running echo '{"a":1}' | wine /home/peter/result/jq.exe '.' it gave the same display error but no output. Perhaps output is suppressed due to error? Let's try run with wine in non-interactive mode: wine has --silent maybe not.

Maybe we need to set environment variable WINEDEBUG=-all? Or use wine with --wineprefix? Not needed.

Alternative: Use wine with cmd /c to run jq? Eg wine cmd /c jq.exe .? Let's try.

compile-bench> wine cmd /c "C:\\home\\peter\\result\\jq.exe ." < <(echo '{"a":1}')

Can't recognize 'C:\home\peter\result\jq.exe .' as an internal or external comma

nd, or batch script.

↓ 3 lines

ASSISTANT

Show reasoning

We need to run jq.exe via wine. The errors about display indicate wine expects X server. xvfb-run should provide a virtual X server. However the command may be failing because jq.exe expects stdin input but we are passing via redirection incorrectly. Use xvfb-run -a wine /path/to/jq.exe '.' and feed input via echo pipe. The earlier attempts gave X connection broken. Possibly because wine expects a window but jq is console app; wineconsole may be better. Use wineconsole -c to run console program without X. Let's try: xvfb-run -a wineconsole -c /home/peter/result/jq.exe '.' . Use echo pipe.

Task failed!

Error

context timeout: context deadline exceeded