CompileBench Attempt: curl, claude-haiku-4.5-thinking-16k, nsf1kd5ndtj9f

<- Ranking

Summary

Task

curl

Model

claude-haiku-4.5-thinking-16k

Status

Success

Performance

Cost	$0.051
Total elapsed time	1m10s
LLM inference time	41s
Command execution time	29s
Commands executed	13

All details >

Attempt ID	`nsf1kd5ndtj9f`	Attempt group	run-15-10-25-19-58
Revision	`81634e2120a2`	AWS Instance	m8i.2xlarge
Start time	2025-10-15T18:18:44.675Z	End time	2025-10-15T18:19:55.105Z
Task	curl	Environment	ubuntu-22.04-amd64-offline
Model	claude-haiku-4.5-thinking-16k	OpenRouter slug	`anthropic/claude-haiku-4.5`
Temperature	1	Explicit prompt caching	true
User msg after tool call	true	Max tool calls	70
Total timeout seconds	900	Single command timeout	600
Cost	$0.051	Duration	1m10s
LLM inference time	41s	Command execution time	29s
Final context tokens	11,270	Total output tokens	3,613
Output reasoning tokens	1,802	Messages	29
Assistant messages	14	User messages	1
System messages	1	Commands executed	13

Download full attempt result JSON

Task

Task: curl

curl 8.16.0 is a command-line HTTP client.
Project link: curl.se

Task:
Compile and install curl to a specific location.

Difficulties:
Standard build, nothing special.

Environment:
Ubuntu 22.04 on amd64, without internet access.

View task page

Execution log

SYSTEM

You are a package-building specialist operating a Ubuntu 22.04 bash shell via one tool: run_terminal_cmd.
The current working directory of every run_terminal_cmd is /home/peter.
Execution rules:
- Always pass non-interactive flags for any command that could prompt (e.g., -y, --yes, DEBIAN_FRONTEND=noninteractive).
- Don't include any newlines in the command.
- The environment is offline, assume you have all the necessary tools already installed.
If you encounter any errors or issues while doing the user's request, you must fix them and continue the task.
At the end verify you did the user request correctly.

USER

You are given a curl v8.16.0 source code at /home/peter/curl.tar.gz. Please compile curl and install it to /home/peter/result. Create a symlink from /home/peter/result/curl to the actual binary. Make it build even if some third party dependencies are not available.

ASSISTANT

Show reasoning

The user wants me to:
1. Extract curl v8.16.0 source code from /home/peter/curl.tar.gz
2. Compile curl
3. Install it to /home/peter/result
4. Create a symlink from /home/peter/result/curl to the actual binary
5. Make it build even if some third-party dependencies are not available

Let me break this down:
1. First, I need to extract the tar.gz file
2. Navigate to the extracted directory
3. Run configure with appropriate flags to handle missing dependencies
4. Build with make
5. Install to /home/peter/result
6. Create a symlink

Let me start by extracting and exploring the tarball, then configuring and building.

compile-bench> cd /home/peter && tar -tzf curl.tar.gz | head -20

curl-8.16.0/
curl-8.16.0/.editorconfig
curl-8.16.0/CHANGES.md
curl-8.16.0/CMake/
curl-8.16.0/CMake/CMakeConfigurableFile.in
curl-8.16.0/CMake/CurlSymbolHiding.cmake
curl-8.16.0/CMake/CurlTests.c
curl-8.16.0/CMake/FindBrotli.cmake
curl-8.16.0/CMake/FindCares.cmake
curl-8.16.0/CMake/FindGSS.cmake
curl-8.16.0/CMake/FindLDAP.cmake
curl-8.16.0/CMake/FindLibgsasl.cmake
curl-8.16.0/CMake/FindLibidn2.cmake
curl-8.16.0/CMake/FindLibpsl.cmake
curl-8.16.0/CMake/FindLibrtmp.cmake
curl-8.16.0/CMake/FindLibssh.cmake
curl-8.16.0/CMake/FindLibssh2.cmake
curl-8.16.0/CMake/FindLibuv.cmake
curl-8.16.0/CMake/FindMbedTLS.cmake
curl-8.16.0/CMake/FindNGHTTP2.cmake

↓ 21 lines

ASSISTANT

Show reasoning

The user wants me to:
1. Extract curl v8.16.0 source code from /home/peter/curl.tar.gz
2. Compile it
3. Install it to /home/peter/result
4. Create a symlink from /home/peter/result/curl to the actual binary
5. Make it build even if some third-party dependencies are not available

Let me proceed with the extraction and compilation. I'll use autoconf/configure approach with flags to disable optional dependencies.

First, let me extract the tar file, then configure with flags to disable optional dependencies, compile, and install.

compile-bench> cd /home/peter && tar -xzf curl.tar.gz

[empty output]

ASSISTANT

Show reasoning

The user wants me to:
1. Extract the curl source code
2. Compile it
3. Install it to /home/peter/result
4. Create a symlink from /home/peter/result/curl to the actual binary
5. Make sure it builds even if third party dependencies are not available

I've extracted it. Now I need to:
1. Navigate to the curl directory
2. Run configure or cmake with flags to disable optional dependencies
3. Build it
4. Install it to /home/peter/result
5. Create the symlink

Let me check what build system curl uses and then proceed with compilation with flags to disable optional dependencies.

compile-bench> cd /home/peter/curl-8.16.0 && ls -la | grep -E "configure|CMakeLists"

-rw-r--r--  1 peter peter   92961 Sep 10 05:43 CMakeLists.txt
-rwxr-xr-x  1 peter peter 1349020 Sep 10 05:43 configure
-rw-r--r--  1 peter peter  166752 Sep 10 05:43 configure.ac

↓ 4 lines

ASSISTANT

Show reasoning

The user wants me to:
1. Compile curl v8.16.0 from source
2. Install it to /home/peter/result
3. Create a symlink from /home/peter/result/curl to the actual binary
4. Make it build even if some third party dependencies are not available

I can see the source has been extracted. It has both a configure script and CMakeLists.txt, so it can be built with either autotools or cmake.

Since the user wants it to build even if third party dependencies are not available, I should use configure with flags to disable optional dependencies. Let me use the configure script approach as it's more straightforward.

I'll:
1. Create the result directory
2. Run ./configure with options to disable optional dependencies and set prefix to /home/peter/result
3. Run make
4. Run make install
5. Create a symlink from /home/peter/result/curl to the actual binary

Let me start by running configure with --help to see what options are available for disabling dependencies.

compile-bench> cd /home/peter/curl-8.16.0 && ./configure --help | grep -E "disable|without" | head -30

      --cache-file=FILE   cache test results in FILE [disabled]
  --disable-option-checking  ignore unrecognized --enable/--with options
  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
  --disable-silent-rules  verbose build output (undo: "make V=0")
  --disable-debug         Disable debug build options
  --disable-optimize      Disable compiler optimizations
  --disable-warnings      Disable strict compiler warnings
  --disable-werror        Disable compiler warnings as errors
  --disable-curldebug     Disable curl debug memory tracking
  --disable-symbol-hiding Disable hiding of library internal symbols
  --disable-ares          Disable c-ares for DNS lookups
  --disable-rt            disable dependency on -lrt
  --disable-httpsrr       Disable HTTPSRR support
  --disable-ech           Disable ECH support
  --disable-ssls-export   Disable SSL session export support
  --disable-dependency-tracking
  --disable-largefile     omit support for large files
  --disable-libtool-lock  avoid locking (might break parallel builds)
  --disable-unity         Disable unity (default)
  --disable-http          Disable HTTP support
  --disable-ftp           Disable FTP support
  --disable-file          Disable FILE support
  --disable-ipfs          Disable IPFS support
  --disable-ldap          Disable LDAP support
  --disable-ldaps         Disable LDAPS support
  --disable-rtsp          Disable RTSP support
  --disable-proxy         Disable proxy support
  --disable-dict          Disable DICT support
  --disable-telnet        Disable TELNET support
  --disable-tftp          Disable TFTP support

↓ 31 lines

ASSISTANT

Show reasoning

The user wants me to compile curl v8.16.0 and install it to /home/peter/result with a symlink. They also want to make sure it builds even if some third party dependencies are not available.

Let me proceed with:
1. Configure with options to disable optional dependencies/features
2. Build
3. Install to /home/peter/result
4. Create a symlink from /home/peter/result/curl to the actual binary

I'll use configure with --disable options for optional features that might not be available.

compile-bench> mkdir -p /home/peter/result

[empty output]

ASSISTANT

Show reasoning

Now I need to configure curl with options to make it build even if third-party dependencies are not available. I'll disable optional dependencies like:
- SSL/TLS support (optional dependencies)
- Other external libraries that might not be available

Let me configure it with --prefix to install to /home/peter/result and disable the optional dependencies.

compile-bench> cd /home/peter/curl-8.16.0 && ./configure --prefix=/home/peter/result --disable-ares --disable-ldap --disable-ldaps --disable-rtsp --disable-dict --disable-telnet --disable-tftp --disable-ipfs --disable-smb --disable-ssl --disable-tls-srp --with-openssl=no --with-gnutls=no --with-mbedtls=no --with-wolfssl=no --with-nss=no --with-securetransport=no --with-brotli=no --with-zstd=no --with-libpsl=no --with-libgsasl=no --with-nghttp2=no --with-nghttp3=no --with-ngtcp2=no

configure: WARNING: unrecognized options: --disable-ssl, --with-nss, --with-securetransport
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for ar... /usr/bin/ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking how to run the C preprocessor... gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
configure: error: select TLS backend(s) or disable TLS with --without-ssl.

Select from these:

--with-amissl
--with-gnutls
--with-mbedtls
--with-openssl (also works for BoringSSL and LibreSSL)
--with-rustls
--with-schannel
--with-wolfssl

↓ 74 lines

ASSISTANT

Show reasoning

The configure script is requiring a TLS backend to be selected. I need to use --without-ssl to disable TLS entirely. Let me retry with the correct flag.

compile-bench> cd /home/peter/curl-8.16.0 && ./configure --prefix=/home/peter/result --without-ssl --disable-ares --disable-ldap --disable-ldaps --disable-rtsp --disable-dict --disable-telnet --disable-tftp --disable-ipfs --with-brotli=no --with-zstd=no --with-libpsl=no --with-libgsasl=no --with-nghttp2=no --with-nghttp3=no --with-ngtcp2=no

checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for ar... /usr/bin/ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking how to run the C preprocessor... gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for grep that handles long lines and -e... (cached) /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking if OS is AIX (to define _ALL_SOURCE)... no
checking if _THREAD_SAFE is already defin
[command output truncated]
ng tests/config
config.status: creating tests/configurehelp.pm
config.status: creating tests/certs/Makefile
config.status: creating tests/data/Makefile
config.status: creating tests/server/Makefile
config.status: creating tests/libtest/Makefile
config.status: creating tests/unit/Makefile
config.status: creating tests/tunit/Makefile
config.status: creating tests/http/config.ini
config.status: creating tests/http/Makefile
config.status: creating packages/Makefile
config.status: creating packages/vms/Makefile
config.status: creating libcurl.pc
config.status: creating curl-config
config.status: creating lib/curl_config.h
config.status: executing depfiles commands
config.status: executing libtool commands
configure: Configured to build curl/libcurl:

  Host setup:       x86_64-pc-linux-gnu
  Install prefix:   /home/peter/result
  Compiler:         gcc
   CFLAGS:          -Werror-implicit-function-declaration -O2 -Wno-system-headers
   CFLAGS extras:   
   CPPFLAGS:        -D_GNU_SOURCE
   LDFLAGS:         
     curl-config:   
   LIBS:            

  curl version:     8.16.0
  SSL:              no      (--with-{openssl,gnutls,mbedtls,wolfssl,schannel,amissl,rustls} )
  SSH:              no      (--with-{libssh,libssh2})
  zlib:             no      (--with-zlib)
  brotli:           no      (--with-brotli)
  zstd:             no      (--with-zstd)
  GSS-API:          no      (--with-gssapi)
  GSASL:            no      (--with-gsasl)
  TLS-SRP:          no      (--enable-tls-srp)
  resolver:         POSIX threaded
  IPv6:             enabled
  Unix sockets:     enabled
  IDN:              no      (--with-{libidn2,winidn})
  Build docs:       enabled (--disable-docs)
  Build libcurl:    Shared=yes, Static=yes
  Built-in manual:  enabled
  --libcurl option: enabled (--disable-libcurl-option)
  Verbose errors:   enabled (--disable-verbose)
  Code coverage:    disabled
  SSPI:             no      (--enable-sspi)
  ca cert bundle:   no
  ca cert path:     
  ca cert embed:    no
  ca fallback:      
  LDAP:             no      (--enable-ldap / --with-ldap-lib / --with-lber-lib)
  LDAPS:            no      (--enable-ldaps)
  IPFS/IPNS:        no      (--enable-ipfs)
  RTSP:             no      (--enable-rtsp)
  RTMP:             no      (--with-librtmp)
  PSL:              no      (--with-libpsl)
  Alt-svc:          enabled (--disable-alt-svc)
  Headers API:      enabled (--disable-headers-api)
  HSTS:             no      (--enable-hsts)
  HTTP1:            enabled (internal)
  HTTP2:            no      (--with-nghttp2)
  HTTP3:            no      (--with-ngtcp2 --with-nghttp3, --with-quiche, --with-openssl-quic)
  ECH:              no      (--enable-ech)
  HTTPS RR:         no      (--enable-httpsrr)
  SSLS-EXPORT:      no      (--enable-ssls-export)
  Protocols:        file ftp gopher http imap mqtt pop3 smtp ws
  Features:         alt-svc AsynchDNS IPv6 Largefile threadsafe UnixSockets

↓ 139 lines

ASSISTANT

Show reasoning

Good! The configure script ran successfully. Now I need to:
1. Build the project with make
2. Install it with make install
3. Create a symlink from /home/peter/result/curl to the actual binary

Let me proceed with the build and installation.

compile-bench> cd /home/peter/curl-8.16.0 && make -j4

Making all in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make  all-am
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
  CC       libcurl_la-altsvc.lo
  CC       libcurl_la-amigaos.lo
  CC       libcurl_la-asyn-ares.lo
  CC       libcurl_la-asyn-base.lo
  CC       libcurl_la-asyn-thrdd.lo
  CC       libcurl_la-bufq.lo
  CC       libcurl_la-bufref.lo
  CC       libcurl_la-cf-h1-proxy.lo
  CC       libcurl_la-cf-h2-proxy.lo
  CC       libcurl_la-cf-haproxy.lo
  CC       libcurl_la-cf-https-connect.lo
  CC       libcurl_la-cf-ip-happy.lo
  CC       libcurl_la-cf-socket.lo
  CC       libcurl_la-cfilters.lo
  CC       libcurl_la-conncache.lo
  CC       libcurl_la-connect.lo
  CC       libcurl_la-content_encoding.lo
  CC       libcurl_la-cookie.lo
  CC       libcurl_la-cshutdn.lo
  CC       libcurl_la-curl_addrinfo.lo
  CC       libcurl_la-curl_des.lo
  CC       libcurl_la-curl_endian.lo
  CC       libcurl_la-curl_fnmatch.lo
  CC       libcurl_la-curl_get_line.lo
  CC       libcurl_la-curl_gethostname.lo
  CC       libcurl_la-curl_gssapi.lo
  CC       libcurl_la-curl_memrchr.lo
  CC       libcurl_la-curl_ntlm_core.lo
  CC       libcurl_la-curl_range.lo
  CC       libcurl_la-curl_rtmp.lo
  CC       libcurl_la-curl_sasl.lo
  CC       libcurl_la-curl_sha512_256.lo
  CC       libcurl_la-curl_sspi.lo
  CC       libcurl_la-curl_threads.lo
  CC       libcurl_la-curl_trc.lo
  CC       libcurl_la-cw-out.lo
  CC       libcurl_la-cw-pause.lo
  CC       libcurl_la-dict.lo
  CC       libcurl_la-doh.lo
  CC       libcurl_la-dynhds.lo
  CC       libcurl_la-easy.lo
  CC       libcurl_la-easygetopt.lo
  CC       libcurl_la-easyoptions.lo
  CC       libcurl_la-escape.lo
  CC       libcurl_la-fake_addrinfo.lo
  CC       libcurl_la-file.lo
  CC       libcurl_la-fileinfo.lo
  CC       libcurl_la-fopen.lo
  CC       libcurl_la-formdata.lo
  CC       libcurl_la-ftp.lo
  CC       libcurl_la-ftplistparser.lo
  CC       libcurl_la-getenv.lo
  CC       libcurl_la-getinfo.lo
  CC       libcurl_la-gopher.lo
  CC       libcurl_la-hash.lo
  CC       libcurl_la-headers.lo
  CC       libcurl_la-hmac.lo
  CC       libcurl_la-hostip.lo
  CC       libcurl_la-hostip4.lo
  CC       libcurl_la-hostip6.lo
  CC       libcurl_la-hsts.lo
  CC       libcurl_la-http.lo
  CC       libcurl_la-http1.lo
  CC       libcurl_la-http2.lo
  CC       libcurl_la-http_aws_sigv4.lo
  CC       libcurl_la-http_chunks.lo
[command output truncated]
  CC       ../lib/curlx/curl-wait.o
  CC       ../lib/curlx/curl-warnless.o
  CC       curlinfo.o
  CC       libcurltool_la-config2setopts.lo
  CC       libcurltool_la-slist_wc.lo
  CC       libcurltool_la-terminal.lo
  CC       libcurltool_la-tool_bname.lo
  CC       libcurltool_la-tool_cb_dbg.lo
  CC       libcurltool_la-tool_cb_hdr.lo
  CC       libcurltool_la-tool_cb_prg.lo
  CC       libcurltool_la-tool_cb_rea.lo
  CC       libcurltool_la-tool_cb_see.lo
  CC       libcurltool_la-tool_cb_soc.lo
  CC       libcurltool_la-tool_cb_wrt.lo
  CC       libcurltool_la-tool_cfgable.lo
  CC       libcurltool_la-tool_dirhie.lo
  CC       libcurltool_la-tool_doswin.lo
  CC       libcurltool_la-tool_easysrc.lo
  CC       libcurltool_la-tool_filetime.lo
  CC       libcurltool_la-tool_findfile.lo
  CC       libcurltool_la-tool_formparse.lo
  CC       libcurltool_la-tool_getparam.lo
  CC       libcurltool_la-tool_getpass.lo
  CC       libcurltool_la-tool_help.lo
  CC       libcurltool_la-tool_helpers.lo
  CC       libcurltool_la-tool_ipfs.lo
  CC       libcurltool_la-tool_libinfo.lo
  CC       libcurltool_la-tool_listhelp.lo
  CC       libcurltool_la-tool_main.lo
  CC       libcurltool_la-tool_msgs.lo
  CC       libcurltool_la-tool_operate.lo
  CC       libcurltool_la-tool_operhlp.lo
  CC       libcurltool_la-tool_paramhlp.lo
  CC       libcurltool_la-tool_parsecfg.lo
  CC       libcurltool_la-tool_progress.lo
  CC       libcurltool_la-tool_setopt.lo
  CC       libcurltool_la-tool_ssls.lo
  CC       libcurltool_la-tool_stderr.lo
  CC       libcurltool_la-tool_strdup.lo
  CC       libcurltool_la-tool_urlglob.lo
  CC       libcurltool_la-tool_util.lo
  CC       libcurltool_la-tool_vms.lo
  CC       libcurltool_la-tool_writeout.lo
  CC       libcurltool_la-tool_writeout_json.lo
  CC       libcurltool_la-tool_xattr.lo
  CC       libcurltool_la-var.lo
  CC       ../lib/curlx/libcurltool_la-base64.lo
  CC       ../lib/curlx/libcurltool_la-multibyte.lo
  CC       ../lib/curlx/libcurltool_la-dynbuf.lo
  CC       ../lib/curlx/libcurltool_la-nonblock.lo
  CC       ../lib/curlx/libcurltool_la-strparse.lo
  CC       ../lib/curlx/libcurltool_la-timediff.lo
  CC       ../lib/curlx/libcurltool_la-timeval.lo
  CC       ../lib/curlx/libcurltool_la-version_win32.lo
  CC       ../lib/curlx/libcurltool_la-wait.lo
  CC       ../lib/curlx/libcurltool_la-warnless.lo
  CC       curl-tool_hugehelp.o
  CC       curl-tool_ca_embed.o
  CCLD     curlinfo
  CCLD     curl
  CCLD     libcurltool.la
make[1]: Leaving directory '/home/peter/curl-8.16.0/src'
Making all in scripts
make[1]: Entering directory '/home/peter/curl-8.16.0/scripts'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/home/peter/curl-8.16.0/scripts'
make[1]: Entering directory '/home/peter/curl-8.16.0'
make[1]: Nothing to be done for 'all-am'.
make[1]: Leaving directory '/home/peter/curl-8.16.0'

↓ 141 lines

ASSISTANT

Show reasoning

Good! The build succeeded. Now I need to install it to /home/peter/result and create a symlink from /home/peter/result/curl to the actual binary.

compile-bench> cd /home/peter/curl-8.16.0 && make install

Making install in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
 /usr/bin/mkdir -p '/home/peter/result/lib'
 /bin/bash ../libtool   --mode=install /usr/bin/install -c   libcurl.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libcurl.so.4.8.0 /home/peter/result/lib/libcurl.so.4.8.0
libtool: install: (cd /home/peter/result/lib && { ln -s -f libcurl.so.4.8.0 libcurl.so.4 || { rm -f libcurl.so.4 && ln -s libcurl.so.4.8.0 libcurl.so.4; }; })
libtool: install: (cd /home/peter/result/lib && { ln -s -f libcurl.so.4.8.0 libcurl.so || { rm -f libcurl.so && ln -s libcurl.so.4.8.0 libcurl.so; }; })
libtool: install: /usr/bin/install -c .libs/libcurl.lai /home/peter/result/lib/libcurl.la
libtool: install: /usr/bin/install -c .libs/libcurl.a /home/peter/result/lib/libcurl.a
libtool: install: chmod 644 /home/peter/result/lib/libcurl.a
libtool: install: ranlib /home/peter/result/lib/libcurl.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /home/peter/result/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/peter/curl-8.16.0/lib'
make[1]: Leaving directory '/home/peter/curl-8.16.0/lib'
Making install in docs
make[1]: Entering directory '/home/peter/curl-8.16.0/docs'
Making install in .
make[2]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /usr/bin/install -c -m 644 curl-config.1 wcurl.1 '/home/peter/result/share/man/man1'
make[3]: Leaving directory '/home/peter/curl-8.16.0/docs'
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs'
Making install in cmdline-opts
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /u
[command output truncated]
ng directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/aclocal'
 /usr/bin/install -c -m 644 libcurl.m4 '/home/peter/result/share/aclocal'
 /usr/bin/mkdir -p '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_easy_cleanup.3 curl_easy_duphandle.3 curl_easy_escape.3 curl_easy_getinfo.3 curl_easy_header.3 curl_easy_init.3 curl_easy_nextheader.3 curl_easy_option_by_id.3 curl_easy_option_by_name.3 curl_easy_option_next.3 curl_easy_pause.3 curl_easy_perform.3 curl_easy_recv.3 curl_easy_reset.3 curl_easy_send.3 curl_easy_setopt.3 curl_easy_ssls_export.3 curl_easy_ssls_import.3 curl_easy_strerror.3 curl_easy_unescape.3 curl_easy_upkeep.3 curl_escape.3 curl_formadd.3 curl_formfree.3 curl_formget.3 curl_free.3 curl_getdate.3 curl_getenv.3 curl_global_cleanup.3 curl_global_init.3 curl_global_init_mem.3 curl_global_sslset.3 curl_global_trace.3 curl_mime_addpart.3 curl_mime_data.3 curl_mime_data_cb.3 curl_mime_encoder.3 curl_mime_filedata.3 curl_mime_filename.3 curl_mime_free.3 '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_mime_headers.3 curl_mime_init.3 curl_mime_name.3 curl_mime_subparts.3 curl_mime_type.3 curl_mprintf.3 curl_multi_add_handle.3 curl_multi_assign.3 curl_multi_cleanup.3 curl_multi_fdset.3 curl_multi_get_handles.3 curl_multi_get_offt.3 curl_multi_info_read.3 curl_multi_init.3 curl_multi_perform.3 curl_multi_poll.3 curl_multi_remove_handle.3 curl_multi_setopt.3 curl_multi_socket.3 curl_multi_socket_action.3 curl_multi_socket_all.3 curl_multi_strerror.3 curl_multi_timeout.3 curl_multi_wait.3 curl_multi_waitfds.3 curl_multi_wakeup.3 curl_pushheader_byname.3 curl_pushheader_bynum.3 curl_share_cleanup.3 curl_share_init.3 curl_share_setopt.3 curl_share_strerror.3 curl_slist_append.3 curl_slist_free_all.3 curl_strequal.3 curl_strnequal.3 curl_unescape.3 curl_url.3 curl_url_cleanup.3 curl_url_dup.3 '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_url_get.3 curl_url_set.3 curl_url_strerror.3 curl_version.3 curl_version_info.3 curl_ws_meta.3 curl_ws_recv.3 curl_ws_send.3 curl_ws_start_frame.3 libcurl-easy.3 libcurl-env-dbg.3 libcurl-env.3 libcurl-errors.3 libcurl-multi.3 libcurl-security.3 libcurl-share.3 libcurl-symbols.3 libcurl-thread.3 libcurl-tutorial.3 libcurl-url.3 libcurl-ws.3 libcurl.3 '/home/peter/result/share/man/man3'
make[6]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[4]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[3]: Leaving directory '/home/peter/curl-8.16.0'
make[2]: Leaving directory '/home/peter/curl-8.16.0'
make[1]: Leaving directory '/home/peter/curl-8.16.0'

↓ 69 lines

ASSISTANT

Show reasoning

Good! The build and installation completed successfully. Now I need to find the actual curl binary and create a symlink from /home/peter/result/curl to it. Let me first find where the curl binary was installed.

compile-bench> ls -la /home/peter/result/bin/

total 724
drwxr-xr-x 2 peter peter   4096 Oct 15 18:19 .
drwxr-xr-x 6 peter peter   4096 Oct 15 18:19 ..
-rwxr-xr-x 1 peter peter 710656 Oct 15 18:19 curl
-rwxr-xr-x 1 peter peter   4972 Oct 15 18:19 curl-config
-rwxr-xr-x 1 peter peter  10622 Oct 15 18:19 wcurl

↓ 7 lines

ASSISTANT

Show reasoning

The user wants me to create a symlink from /home/peter/result/curl to the actual binary. The actual binary is at /home/peter/result/bin/curl. I need to create a symlink.

I'll create a symlink at /home/peter/result/curl that points to /home/peter/result/bin/curl

compile-bench> ln -s /home/peter/result/bin/curl /home/peter/result/curl

[empty output]

ASSISTANT

Show reasoning

The user asked me to:
1. Compile curl v8.16.0 from source
2. Install it to /home/peter/result
3. Create a symlink from /home/peter/result/curl to the actual binary
4. Make it build even if some third party dependencies are not available

I have completed all of these tasks:
1. ✓ Extracted the tar.gz file
2. ✓ Configured the build with --without-ssl and various --disable flags and --with-*=no flags to disable optional dependencies
3. ✓ Built with make
4. ✓ Installed to /home/peter/result with make install
5. ✓ Created symlink from /home/peter/result/curl to /home/peter/result/bin/curl

Let me verify everything is in place.

compile-bench> ls -la /home/peter/result/curl && /home/peter/result/curl --version

lrwxrwxrwx 1 peter peter 27 Oct 15 18:19 /home/peter/result/curl -> /home/peter/result/bin/curl
curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0
Release-Date: 2025-09-10
Protocols: file ftp gopher http imap mqtt pop3 smtp ws
Features: alt-svc AsynchDNS IPv6 Largefile threadsafe UnixSockets

↓ 6 lines

ASSISTANT

Show reasoning

I've successfully:
1. Extracted the tarball
2. Configured with --without-ssl and disabled optional dependencies like ares, ldap, ldaps, rtsp, dict, telnet, tftp, ipfs, brotli, zstd, libpsl, libgsasl, nghttp2, nghttp3, ngtcp2
3. Built the project with make -j4
4. Installed with make install
5. Created a symlink from /home/peter/result/curl to /home/peter/result/bin/curl
6. Verified the symlink works and curl runs with --version

Let me verify the results are correct:

compile-bench> ls -la /home/peter/result/ && echo "---" && file /home/peter/result/curl && echo "---" && /home/peter/result/curl --version

total 24
drwxr-xr-x 6 peter peter 4096 Oct 15 18:19 .
drwxr-x--- 1 peter peter 4096 Oct 15 18:18 ..
drwxr-xr-x 2 peter peter 4096 Oct 15 18:19 bin
lrwxrwxrwx 1 peter peter   27 Oct 15 18:19 curl -> /home/peter/result/bin/curl
drwxr-xr-x 3 peter peter 4096 Oct 15 18:19 include
drwxr-xr-x 3 peter peter 4096 Oct 15 18:19 lib
drwxr-xr-x 4 peter peter 4096 Oct 15 18:19 share
---
/home/peter/result/curl: symbolic link to /home/peter/result/bin/curl
---
curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0
Release-Date: 2025-09-10
Protocols: file ftp gopher http imap mqtt pop3 smtp ws
Features: alt-svc AsynchDNS IPv6 Largefile threadsafe UnixSockets

↓ 16 lines

ASSISTANT

Show reasoning

Let me verify that the task has been completed successfully:

1. ✅ Extracted curl v8.16.0 source code from /home/peter/curl.tar.gz
2. ✅ Compiled curl with configuration that disables third-party dependencies:
- Disabled SSL/TLS (--without-ssl)
- Disabled c-ares DNS (--disable-ares)
- Disabled LDAP/LDAPS
- Disabled RTSP, DICT, TELNET, TFTP, IPFS
- Disabled optional compression and encoding libraries (brotli, zstd, libpsl, libgsasl, nghttp2, nghttp3, ngtcp2)
3. ✅ Installed curl to /home/peter/result
4. ✅ Created a symlink from /home/peter/result/curl to the actual binary (/home/peter/result/bin/curl)

The verification shows:
- The symlink exists: lrwxrwxrwx 1 peter peter 27 Oct 15 18:19 curl -> /home/peter/result/bin/curl
- The binary works: curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0
- The installation is complete with bin, lib, include, and share directories

The task has been completed successfully!

Perfect! I have successfully completed all the requested tasks:

Summary of what was accomplished:

1. Extracted curl v8.16.0 source code from /home/peter/curl.tar.gz

2. Compiled curl with minimal dependencies by disabling:
- SSL/TLS support (--without-ssl)
- c-ares DNS lookups (--disable-ares)
- LDAP/LDAPS support
- RTSP, DICT, TELNET, TFTP, IPFS protocols
- Optional libraries: brotli, zstd, libpsl, libgsasl, nghttp2, nghttp3, ngtcp2

3. Installed curl to /home/peter/result with:
- Binary: /home/peter/result/bin/curl
- Libraries: /home/peter/result/lib/ (libcurl.so, libcurl.a)
- Headers: /home/peter/result/include/
- Documentation: /home/peter/result/share/

4. Created symlink from /home/peter/result/curl → /home/peter/result/bin/curl

5. Verified the installation:
- Symlink is active and functional
- curl v8.16.0 runs successfully
- Protocols available: file, ftp, gopher, http, imap, mqtt, pop3, smtp, ws

The build succeeded even without third-party dependencies by disabling those optional features during configuration.

Task finished successfully, all checks passed!

Checks passed:

curl binary exists

curl version matches expected

curl downloaded the expected local file content