Summary
Performance
| Cost | $0.077 |
| Total elapsed time | 2m36s |
| LLM inference time | 1m56s |
| Command execution time | 40s |
| Commands executed | 10 |
All details >
| Attempt ID | nckhvg37rrvka | Attempt group | run-16-09-22-05 |
| Revision | fb5c74bd2fee | AWS Instance | m8i.2xlarge |
| Start time | 2025-09-16T21:39:44.117Z | End time | 2025-09-16T21:42:22.380Z |
| Task | curl-ssl | Environment | ubuntu-22.04-amd64 |
| Model |  gpt-5-high | OpenRouter slug | openai/gpt-5 |
| Temperature | 1 | Explicit prompt caching | false |
| User msg after tool call | false | Max tool calls | 70 |
| Total timeout seconds | 900 | Single command timeout | 600 |
| Cost | $0.077 | Duration | 2m36s |
| LLM inference time | 1m56s | Command execution time | 40s |
| Final context tokens | 14,048 | Total output tokens | 4,866 |
| Output reasoning tokens | 3,968 | Messages | 23 |
| Assistant messages | 11 | User messages | 1 |
| System messages | 1 | Commands executed | 10 |
Task
Task: curl-ssl
curl 8.16.0 is a command-line HTTP client.
Project link: curl.se
Task:
Compile and install curl to a specific location. Build with SSL support (TLS v1.3), brotli, zlib and zstd.
Difficulties:
Installing dependencies can be tricky.
Environment:
Ubuntu 22.04 on amd64, with internet access.
Execution log
SYSTEM
You are a package-building specialist operating a Ubuntu 22.04 bash shell via one tool: run_terminal_cmd.
The current working directory of every run_terminal_cmd is /home/peter.
Execution rules:
- Always pass non-interactive flags for any command that could prompt (e.g., -y, --yes, DEBIAN_FRONTEND=noninteractive).
- Don't include any newlines in the command.
- You can use sudo.
If you encounter any errors or issues while doing the user's request, you must fix them and continue the task.
At the end verify you did the user request correctly.
USER
You are given a curl v8.16.0 source code at /home/peter/curl.tar.gz. Please compile curl and install it to /home/peter/result. Create a symlink from /home/peter/result/curl to the actual binary. Make sure it builds with SSL support (TLS v1.3), brotli, zlib and zstd.
ASSISTANT
Show reasoning
Clarifying installation verification
I need to fix errors as they arise and ensure that I properly fulfill the user’s request. After installation, I should run a command to check if the curl version includes SSL, specifically OpenSSL with TLS v1.3, although it may not state that overtly. There are several ways to verify TLS v1.3 support, but since I’m operating in an offline environment, I can only confirm build support for SSL features like brotli, zlib, and zstd.Planning build requirements
I’ll rely on the OpenSSL library, particularly versions 1.1.1 and above, to support TLSv1.3. I need to confirm that brotli and zstd are included in the build, which requires their development libraries to be installed. The necessary packages include build-essential, ca-certificates, and various dev libraries. Plus, I should verify the directory structure exists and configure the tarball extraction for OpenSSL and optional dependencies. It's a straightforward plan, but I'll need the right tools and libraries set up beforehand!Configuring curl installation
I should use the configure command with the option --with-zlib, either by specifying the path or letting it autodetect since it's a system library. For curl version 8.16.0, I must include options like --with-openssl, --with-brotli, and --with-zstd. After configuring, I'll compile with make -j "$(nproc)" and install it, creating a symlink afterward. There are some package name checks to ensure I have the correct dependencies, and I need to set the working directory properly for extracting the tarball.Running installation commands
I plan to run the configure command from within the specified directory. To maintain a single command format, I can chain commands with &&, which helps avoid any issues with newlines in the input. It’s also important to ensure that we create the symlink and address any problems that come up during the process. For dependencies, I’ll use sudo DEBIAN_FRONTEND=noninteractive apt-get update, but I need to clarify that the -y flag isn’t necessary for an update, as it doesn't prompt for confirmation. It's best to leave that out.Planning the installation process
I’m ready to run the installation commands. First, I’ll execute sudo apt-get update to refresh the package list, then use sudo DEBIAN_FRONTEND=noninteractive apt-get install -y to install essential packages. I need to make sure each command is executed without newlines, allowing chaining with &&. Next, I'll create a directory for extracting the tarball and navigate to it carefully, ensuring that I manage the extraction to avoid confusion with top-level folders. Afterward, it's crucial to configure curl with the right options and verify that the build includes important features like TLS v1.3 support using OpenSSL.
compile-bench> sudo apt-get update
0% [Working]
Hit:1 http://archive.ubuntu.com/ubuntu jammy InRelease
0% [Connecting to security.ubuntu.com (185.125.190.81)]
Get:2 http://archive.ubuntu.com/ubuntu jammy-updates InRelease [128 kB]
0% [2 InRelease 14.2 kB/128 kB 11%] [Connecting to security.ubuntu.com (185.125
0% [2 InRelease 40.2 kB/128 kB 31%] [Waiting for headers]
0% [Waiting for headers]
Get:3 http://archive.ubuntu.com/ubuntu jammy-backports InRelease [127 kB]
0% [3 InRelease 6932 B/127 kB 5%] [Waiting for headers]
0% [Waiting for headers]
0% [Waiting for headers]
Get:4 http://security.ubuntu.com/ubuntu jammy-security InRelease [129 kB]
0% [Waiting for headers] [4 InRelease 14.2 kB/129 kB 11%]
Get:5 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 Packages [3626 kB]
0% [5 Packages 8447 B/3626 kB 0%] [4 InRelease 14.2 kB/129 kB 11%]
0% [5 Packages 208 kB/3626 kB 6%] [4 InRelease 14.2 kB/129 kB 11%]
0% [4 InRelease 34.4 kB/129 kB 27%]
0% [5 Packages store 0 B] [Waiting for headers] [4 InRelease 34.4 kB/129 kB 27%
Get:6 http://archive.ubuntu.com/ubuntu jammy-updates/universe amd64 Packages [1581 kB]
0% [5 Packages store 0 B] [6 Packages 45.1 kB/1581 kB 3%] [4 InRelease 43.1 kB/
0% [5 Packages store 0 B] [4 InRelease 43.1 kB/129 kB 33%]
0% [4 InRelease 69.2 kB/129 kB 54%]
0% [6 Packages store 0 B] [4 InRelease 69.2 kB/129 kB 54%]
0% [4 InRelease 95.3 kB/129 kB 74%]
0% [Working]
46% [Working]
Get:7 http://security.ubuntu.com/ubuntu jammy-security/restricted amd64 Packages [5441 kB]
46% [7 Packages 2655 B/5441 kB 0%]
64% [7 Packages 3526 kB/5441 kB 65%]
74% [Working]
74% [7 Packages store 0 B]
Get:8 http://security.ubuntu.com/ubuntu jammy-security/main amd64 Packages [3311 kB]
75% [7 Packages store 0 B] [8 Packages 111 kB/3311 kB 3%]
91% [7 Packages store 0 B] [Waiting for headers]
Get:9 http://security.ubuntu.com/ubuntu jammy-security/multiverse amd64 Packages [80.3 kB]
91% [7 Packages store 0 B] [9 Packages 8192 B/80.3 kB 10%]
91% [7 Packages store 0 B] [Waiting for headers]
Get:10 http://security.ubuntu.com/ubuntu jammy-security/universe amd64 Packages [1274 kB]
91% [7 Packages store 0 B] [10 Packages 16.0 kB/1274 kB 1%]
97% [10 Packages 1031 kB/1274 kB 81%]
97% [8 Packages store 0 B] [10 Packages 1031 kB/1274 kB 81%]
98% [8 Packages store 0 B]
99% [Working]
99% [9 Packages store 0 B]
99% [Working]
99% [10 Packages store 0 B]
100% [Working]
Fetched 15.7 MB in 2s (10.1 MB/s)
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 3%
Reading package lists... 3%
Reading package lists... 4%
Reading package lists... 4%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 52%
Reading package lists... 52%
Reading package lists... 67%
Reading package lists... 67%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 81%
Reading package lists... 81%
Reading package lists... 96%
Reading package lists... 96%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... Done
↓ 13 lines
compile-bench> sudo apt-get update
0% [Working]
Hit:1 http://archive.ubuntu.com/ubuntu jammy InRelease
0% [Connecting to security.ubuntu.com (185.125.190.81)]
Get:2 http://archive.ubuntu.com/ubuntu jammy-updates InRelease [128 kB]
0% [2 InRelease 14.2 kB/128 kB 11%] [Connecting to security.ubuntu.com (185.125
0% [2 InRelease 40.2 kB/128 kB 31%] [Waiting for headers]
0% [Waiting for headers]
Get:3 http://archive.ubuntu.com/ubuntu jammy-backports InRelease [127 kB]
0% [3 InRelease 6932 B/127 kB 5%] [Waiting for headers]
0% [Waiting for headers]
0% [Waiting for headers]
Get:4 http://security.ubuntu.com/ubuntu jammy-security InRelease [129 kB]
0% [Waiting for headers] [4 InRelease 14.2 kB/129 kB 11%]
Get:5 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 Packages [3626 kB]
0% [5 Packages 8447 B/3626 kB 0%] [4 InRelease 14.2 kB/129 kB 11%]
0% [5 Packages 208 kB/3626 kB 6%] [4 InRelease 14.2 kB/129 kB 11%]
0% [4 InRelease 34.4 kB/129 kB 27%]
0% [5 Packages store 0 B] [Waiting for headers] [4 InRelease 34.4 kB/129 kB 27%
Get:6 http://archive.ubuntu.com/ubuntu jammy-updates/universe amd64 Packages [1581 kB]
0% [5 Packages store 0 B] [6 Packages 45.1 kB/1581 kB 3%] [4 InRelease 43.1 kB/
0% [5 Packages store 0 B] [4 InRelease 43.1 kB/129 kB 33%]
0% [4 InRelease 69.2 kB/129 kB 54%]
0% [6 Packages store 0 B] [4 InRelease 69.2 kB/129 kB 54%]
0% [4 InRelease 95.3 kB/129 kB 74%]
0% [Working]
46% [Working]
Get:7 http://security.ubuntu.com/ubuntu jammy-security/restricted amd64 Packages [5441 kB]
46% [7 Packages 2655 B/5441 kB 0%]
64% [7 Packages 3526 kB/5441 kB 65%]
74% [Working]
74% [7 Packages store 0 B]
Get:8 http://security.ubuntu.com/ubuntu jammy-security/main amd64 Packages [3311 kB]
75% [7 Packages store 0 B] [8 Packages 111 kB/3311 kB 3%]
91% [7 Packages store 0 B] [Waiting for headers]
Get:9 http://security.ubuntu.com/ubuntu jammy-security/multiverse amd64 Packages [80.3 kB]
91% [7 Packages store 0 B] [9 Packages 8192 B/80.3 kB 10%]
91% [7 Packages store 0 B] [Waiting for headers]
Get:10 http://security.ubuntu.com/ubuntu jammy-security/universe amd64 Packages [1274 kB]
91% [7 Packages store 0 B] [10 Packages 16.0 kB/1274 kB 1%]
97% [10 Packages 1031 kB/1274 kB 81%]
97% [8 Packages store 0 B] [10 Packages 1031 kB/1274 kB 81%]
98% [8 Packages store 0 B]
99% [Working]
99% [9 Packages store 0 B]
99% [Working]
99% [10 Packages store 0 B]
100% [Working]
Fetched 15.7 MB in 2s (10.1 MB/s)
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 3%
Reading package lists... 3%
Reading package lists... 4%
Reading package lists... 4%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 52%
Reading package lists... 52%
Reading package lists... 67%
Reading package lists... 67%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 81%
Reading package lists... 81%
Reading package lists... 96%
Reading package lists... 96%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... Done
ASSISTANT
compile-bench> sudo DEBIAN_FRONTEND=noninteractive apt-get install -y build-essential pkg-config autoconf automake libtool libssl-dev zlib1g-dev libbrotli-dev libzstd-dev
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 3%
Reading package lists... 3%
Reading package lists... 4%
Reading package lists... 4%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 52%
Reading package lists... 52%
Reading package lists... 67%
Reading package lists... 67%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 81%
Reading package lists... 81%
Reading package lists... 96%
Reading package lists... 96%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... Done
Building dependency tree... 0%
Building dependency tree... 0%
Building dependency tree... 50%
Building dependency tree... 50%
Building dependency tree... Done
Reading state information... 0%
Reading state information... 1%
Reading state information... Done
build-essential is already the newest version (12.9ubuntu3).
The following additional packages will be installed:
autotools-dev libglib2.0-0 libglib2.0-data libicu70 libltdl-dev libltdl7
libsigsegv2 libxml2 m4 shared-mime-info xdg-user-dirs
Suggested packages:
autoconf-archive gnu-standards autoconf-doc gettext libtool-doc libssl-doc
gfortran | fortran95-compiler gcj-jdk m4-doc
The following NEW packages will be installed:
autoconf automake autotools-dev libbrotli-dev libglib2.0-0 libglib2.0-data
libicu70 libltdl-dev libltdl7 libsigsegv2 libssl-dev libtool libxml2
libzstd-dev m4 pkg-config shared-mime-info xdg-user-dirs zlib1g-dev
0 upgraded, 19 newly installed, 0 to remove and 0 not upgraded.
Need to get 18.2 MB of archives.
After this operation, 67.4 MB of additional disk space will be used.
0% [Working]
Get:1 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libglib2.0-0 amd64 2.72.4-0ubuntu2.6 [1467 kB]
0% [1 libglib2.0-0 14.2 kB/1467 kB 1%]
2% [1 libglib2.0-0 530 kB/1467 kB 36%]
8% [Waiting for headers]
Get:2 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libglib2.0-data all 2.72.4-0ubuntu2.6 [4698 B]
9% [Waiting for headers]
Get:3 http://archive.ubuntu.com/ubuntu jammy/main amd64 libicu70 amd64 70.1-2 [10.6 MB]
9% [3 libicu70 21.4 kB/10.6 MB 0%]
Get:4 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libxml2 amd64 2.9.13+dfsg-1ubuntu0.9 [764 kB]
57% [4 libxml2 69.4 kB/764 kB 9%]
Get:5 http://archive.ubuntu.com/ubuntu jammy/main amd64 shared-mime-info amd64 2.1-2 [454 kB]
[command output truncated]
age automake.
Preparing to unpack .../10-automake_1%3a1.16.5-1.3_all.deb ...
Unpacking automake (1:1.16.5-1.3) ...
Selecting previously unselected package libbrotli-dev:amd64.
Preparing to unpack .../11-libbrotli-dev_1.0.9-2build6_amd64.deb ...
Unpacking libbrotli-dev:amd64 (1.0.9-2build6) ...
Selecting previously unselected package libltdl7:amd64.
Preparing to unpack .../12-libltdl7_2.4.6-15build2_amd64.deb ...
Unpacking libltdl7:amd64 (2.4.6-15build2) ...
Selecting previously unselected package libltdl-dev:amd64.
Preparing to unpack .../13-libltdl-dev_2.4.6-15build2_amd64.deb ...
Unpacking libltdl-dev:amd64 (2.4.6-15build2) ...
Selecting previously unselected package libssl-dev:amd64.
Preparing to unpack .../14-libssl-dev_3.0.2-0ubuntu1.19_amd64.deb ...
Unpacking libssl-dev:amd64 (3.0.2-0ubuntu1.19) ...
Selecting previously unselected package libtool.
Preparing to unpack .../15-libtool_2.4.6-15build2_all.deb ...
Unpacking libtool (2.4.6-15build2) ...
Selecting previously unselected package libzstd-dev:amd64.
Preparing to unpack .../16-libzstd-dev_1.4.8+dfsg-3build1_amd64.deb ...
Unpacking libzstd-dev:amd64 (1.4.8+dfsg-3build1) ...
Selecting previously unselected package pkg-config.
Preparing to unpack .../17-pkg-config_0.29.2-1ubuntu3_amd64.deb ...
Unpacking pkg-config (0.29.2-1ubuntu3) ...
Selecting previously unselected package zlib1g-dev:amd64.
Preparing to unpack .../18-zlib1g-dev_1%3a1.2.11.dfsg-2ubuntu9.2_amd64.deb ...
Unpacking zlib1g-dev:amd64 (1:1.2.11.dfsg-2ubuntu9.2) ...
Setting up libzstd-dev:amd64 (1.4.8+dfsg-3build1) ...
Setting up xdg-user-dirs (0.17-2ubuntu4) ...
Setting up libglib2.0-0:amd64 (2.72.4-0ubuntu2.6) ...
No schema files found: doing nothing.
Setting up autotools-dev (20220109.1) ...
Setting up libglib2.0-data (2.72.4-0ubuntu2.6) ...
Setting up libsigsegv2:amd64 (2.13-1ubuntu3) ...
Setting up libssl-dev:amd64 (3.0.2-0ubuntu1.19) ...
Setting up pkg-config (0.29.2-1ubuntu3) ...
Setting up libltdl7:amd64 (2.4.6-15build2) ...
Setting up zlib1g-dev:amd64 (1:1.2.11.dfsg-2ubuntu9.2) ...
Setting up libbrotli-dev:amd64 (1.0.9-2build6) ...
Setting up libicu70:amd64 (70.1-2) ...
Setting up libtool (2.4.6-15build2) ...
Setting up m4 (1.4.18-5ubuntu2) ...
Setting up autoconf (2.71-2) ...
Setting up libxml2:amd64 (2.9.13+dfsg-1ubuntu0.9) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/automake.1.gz because associated file /usr/share/man/man1/automake-1.16.1.gz (of link group automake) doesn't exist
update-alternatives: warning: skip creation of /usr/share/man/man1/aclocal.1.gz because associated file /usr/share/man/man1/aclocal-1.16.1.gz (of link group automake) doesn't exist
Setting up libltdl-dev:amd64 (2.4.6-15build2) ...
Setting up shared-mime-info (2.1-2) ...
Processing triggers for libc-bin (2.35-0ubuntu3.10) ...
↓ 76 lines
compile-bench> sudo DEBIAN_FRONTEND=noninteractive apt-get install -y build-essential pkg-config autoconf automake libtool libssl-dev zlib1g-dev libbrotli-dev libzstd-dev
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 3%
Reading package lists... 3%
Reading package lists... 4%
Reading package lists... 4%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 52%
Reading package lists... 52%
Reading package lists... 67%
Reading package lists... 67%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 81%
Reading package lists... 81%
Reading package lists... 96%
Reading package lists... 96%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... Done
Building dependency tree... 0%
Building dependency tree... 0%
Building dependency tree... 50%
Building dependency tree... 50%
Building dependency tree... Done
Reading state information... 0%
Reading state information... 1%
Reading state information... Done
build-essential is already the newest version (12.9ubuntu3).
The following additional packages will be installed:
autotools-dev libglib2.0-0 libglib2.0-data libicu70 libltdl-dev libltdl7
libsigsegv2 libxml2 m4 shared-mime-info xdg-user-dirs
Suggested packages:
autoconf-archive gnu-standards autoconf-doc gettext libtool-doc libssl-doc
gfortran | fortran95-compiler gcj-jdk m4-doc
The following NEW packages will be installed:
autoconf automake autotools-dev libbrotli-dev libglib2.0-0 libglib2.0-data
libicu70 libltdl-dev libltdl7 libsigsegv2 libssl-dev libtool libxml2
libzstd-dev m4 pkg-config shared-mime-info xdg-user-dirs zlib1g-dev
0 upgraded, 19 newly installed, 0 to remove and 0 not upgraded.
Need to get 18.2 MB of archives.
After this operation, 67.4 MB of additional disk space will be used.
0% [Working]
Get:1 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libglib2.0-0 amd64 2.72.4-0ubuntu2.6 [1467 kB]
0% [1 libglib2.0-0 14.2 kB/1467 kB 1%]
2% [1 libglib2.0-0 530 kB/1467 kB 36%]
8% [Waiting for headers]
Get:2 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libglib2.0-data all 2.72.4-0ubuntu2.6 [4698 B]
9% [Waiting for headers]
Get:3 http://archive.ubuntu.com/ubuntu jammy/main amd64 libicu70 amd64 70.1-2 [10.6 MB]
9% [3 libicu70 21.4 kB/10.6 MB 0%]
Get:4 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libxml2 amd64 2.9.13+dfsg-1ubuntu0.9 [764 kB]
57% [4 libxml2 69.4 kB/764 kB 9%]
Get:5 http://archive.ubuntu.com/ubuntu jammy/main amd64 shared-mime-info amd64 2.1-2 [454 kB]
[command output truncated]
age automake.
Preparing to unpack .../10-automake_1%3a1.16.5-1.3_all.deb ...
Unpacking automake (1:1.16.5-1.3) ...
Selecting previously unselected package libbrotli-dev:amd64.
Preparing to unpack .../11-libbrotli-dev_1.0.9-2build6_amd64.deb ...
Unpacking libbrotli-dev:amd64 (1.0.9-2build6) ...
Selecting previously unselected package libltdl7:amd64.
Preparing to unpack .../12-libltdl7_2.4.6-15build2_amd64.deb ...
Unpacking libltdl7:amd64 (2.4.6-15build2) ...
Selecting previously unselected package libltdl-dev:amd64.
Preparing to unpack .../13-libltdl-dev_2.4.6-15build2_amd64.deb ...
Unpacking libltdl-dev:amd64 (2.4.6-15build2) ...
Selecting previously unselected package libssl-dev:amd64.
Preparing to unpack .../14-libssl-dev_3.0.2-0ubuntu1.19_amd64.deb ...
Unpacking libssl-dev:amd64 (3.0.2-0ubuntu1.19) ...
Selecting previously unselected package libtool.
Preparing to unpack .../15-libtool_2.4.6-15build2_all.deb ...
Unpacking libtool (2.4.6-15build2) ...
Selecting previously unselected package libzstd-dev:amd64.
Preparing to unpack .../16-libzstd-dev_1.4.8+dfsg-3build1_amd64.deb ...
Unpacking libzstd-dev:amd64 (1.4.8+dfsg-3build1) ...
Selecting previously unselected package pkg-config.
Preparing to unpack .../17-pkg-config_0.29.2-1ubuntu3_amd64.deb ...
Unpacking pkg-config (0.29.2-1ubuntu3) ...
Selecting previously unselected package zlib1g-dev:amd64.
Preparing to unpack .../18-zlib1g-dev_1%3a1.2.11.dfsg-2ubuntu9.2_amd64.deb ...
Unpacking zlib1g-dev:amd64 (1:1.2.11.dfsg-2ubuntu9.2) ...
Setting up libzstd-dev:amd64 (1.4.8+dfsg-3build1) ...
Setting up xdg-user-dirs (0.17-2ubuntu4) ...
Setting up libglib2.0-0:amd64 (2.72.4-0ubuntu2.6) ...
No schema files found: doing nothing.
Setting up autotools-dev (20220109.1) ...
Setting up libglib2.0-data (2.72.4-0ubuntu2.6) ...
Setting up libsigsegv2:amd64 (2.13-1ubuntu3) ...
Setting up libssl-dev:amd64 (3.0.2-0ubuntu1.19) ...
Setting up pkg-config (0.29.2-1ubuntu3) ...
Setting up libltdl7:amd64 (2.4.6-15build2) ...
Setting up zlib1g-dev:amd64 (1:1.2.11.dfsg-2ubuntu9.2) ...
Setting up libbrotli-dev:amd64 (1.0.9-2build6) ...
Setting up libicu70:amd64 (70.1-2) ...
Setting up libtool (2.4.6-15build2) ...
Setting up m4 (1.4.18-5ubuntu2) ...
Setting up autoconf (2.71-2) ...
Setting up libxml2:amd64 (2.9.13+dfsg-1ubuntu0.9) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/automake.1.gz because associated file /usr/share/man/man1/automake-1.16.1.gz (of link group automake) doesn't exist
update-alternatives: warning: skip creation of /usr/share/man/man1/aclocal.1.gz because associated file /usr/share/man/man1/aclocal-1.16.1.gz (of link group automake) doesn't exist
Setting up libltdl-dev:amd64 (2.4.6-15build2) ...
Setting up shared-mime-info (2.1-2) ...
Processing triggers for libc-bin (2.35-0ubuntu3.10) ...
ASSISTANT
Show reasoning
I see I've installed the dependencies, which is great! Now, I need to focus on creating the result directory. It’s important to keep everything organized, so I’ll extract the tarball to /home/peter/curl-src. I'm considering any potential issues that might pop up, like permissions, so I’ll keep an eye out for that. I guess I’ll just take it step by step and ensure everything goes smoothly. Let’s get this done!
compile-bench> mkdir -p /home/peter/result /home/peter/curl-src && tar -xzf /home/peter/curl.tar.gz -C /home/peter/curl-src --strip-components=1
[empty output]
ASSISTANT
compile-bench> cd /home/peter/curl-src && ./configure --prefix=/home/peter/result --with-openssl --with-zlib --with-brotli --with-zstd checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for ar... /usr/bin/ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking how to run the C preprocessor... gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for grep that handles long lines and -e... (cached) /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking if OS is AIX (to define _ALL_SOURCE)... no
checking if _THREAD_SAFE is already defin
[command output truncated]
ibrary is required... no
checking for gethostbyname... yes
checking whether build target is a native Windows one... (cached) no
checking for proto/bsdsocket.h... no
checking for connect in libraries... yes
checking for sys/types.h... (cached) yes
checking for monotonic clock_gettime... yes
checking for clock_gettime in libraries... no additional lib required
checking if monotonic clock_gettime works... yes
checking for sys/types.h... (cached) yes
checking for raw monotonic clock_gettime... yes
checking for pkg-config... /usr/bin/pkg-config
checking for zlib options with pkg-config... found
checking for zlib.h... yes
configure: found both libz and libz.h header
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libbrotlidec options with pkg-config... found
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libbrotlicommon options with pkg-config... found
checking for BrotliDecoderDecompress in -lbrotlidec... yes
checking for brotli/decode.h... yes
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libzstd options with pkg-config... found
checking for ZSTD_createDStream in -lzstd... yes
checking for zstd.h... yes
checking whether to enable IPv6... yes
checking if struct sockaddr_in6 has sin6_scope_id member... yes
checking if argv can be written to... yes
checking if GSS-API support is requested... no
checking whether to enable Windows native SSL/TLS... no
checking whether to enable Amiga native SSL/TLS (AmiSSL v5)... no
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for openssl options with pkg-config... found
configure: pkg-config: SSL_LIBS: "-lssl -lcrypto"
configure: pkg-config: SSL_LDFLAGS: ""
configure: pkg-config: SSL_CPPFLAGS: ""
checking for HMAC_Update in -lcrypto... yes
checking for SSL_connect in -lssl... yes
checking for openssl/x509.h... yes
checking for openssl/rsa.h... yes
checking for openssl/crypto.h... yes
checking for openssl/pem.h... yes
checking for openssl/ssl.h... yes
checking for openssl/err.h... yes
checking for BoringSSL... no
checking for AWS-LC... no
checking for LibreSSL... no
checking for OpenSSL >= v3... yes
checking for SSL_set_quic_use_legacy_codepoint... no
checking for SSL_set_quic_tls_cbs... no
configure: OpenSSL version does not speak any known QUIC API
checking for SRP support in OpenSSL... yes
checking for QUIC support and OpenSSL >= 3.3... no
configure: built with one SSL backend
checking default CA cert bundle/path... configure: want unset ca /etc/ssl/certs/ca-certificates.crt
/etc/ssl/certs/ca-certificates.crt
/etc/ssl/certs (capath)
checking whether to use OpenSSL's built-in CA store... no
checking CA cert bundle path to embed in the curl tool... no
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libpsl options with pkg-config... no
checking for psl_builtin in -lpsl... no
configure: error: libpsl libs and/or directories were not found where specified!
↓ 132 lines
compile-bench> cd /home/peter/curl-src && ./configure --prefix=/home/peter/result --with-openssl --with-zlib --with-brotli --with-zstd
checking whether to enable maintainer-specific portions of Makefiles... no checking whether make supports nested variables... yes checking whether to enable debug build options... no checking whether to enable compiler optimizer... (assumed) yes checking whether to enable strict compiler warnings... no checking whether to enable compiler warnings as errors... no checking whether to enable curl debug memory tracking... no checking whether to enable hiding of library internal symbols... yes checking whether to enable c-ares for DNS lookups... no checking whether to disable dependency on -lrt... (assumed no) checking whether to enable HTTPSRR support... no checking whether to enable ECH support... no checking whether to enable SSL session export support... no checking for path separator... : checking for sed... /usr/bin/sed checking for grep... /usr/bin/grep checking that grep -E works... yes checking for ar... /usr/bin/ar checking for a BSD-compatible install... /usr/bin/install -c checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking how to run the C preprocessor... gcc -E checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for stdatomic.h... yes checking if _Atomic is available... yes checking for a sed that does not truncate output... (cached) /usr/bin/sed checking for code coverage support... no checking whether build environment is sane... yes checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... gcc3 checking curl version... 8.16.0 checking for perl... /usr/bin/perl checking for httpd... no checking for apache2... no checking for apxs... no configure: httpd/apache2 not in PATH, http tests disabled configure: apxs not in PATH, http tests disabled checking for danted... no checking for danted... no checking for nghttpx... no checking for caddy... no checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... /usr/bin/grep -E checking if OS is AIX (to define _ALL_SOURCE)... no checking if _THREAD_SAFE is already defin [command output truncated] ibrary is required... no checking for gethostbyname... yes checking whether build target is a native Windows one... (cached) no checking for proto/bsdsocket.h... no checking for connect in libraries... yes checking for sys/types.h... (cached) yes checking for monotonic clock_gettime... yes checking for clock_gettime in libraries... no additional lib required checking if monotonic clock_gettime works... yes checking for sys/types.h... (cached) yes checking for raw monotonic clock_gettime... yes checking for pkg-config... /usr/bin/pkg-config checking for zlib options with pkg-config... found checking for zlib.h... yes configure: found both libz and libz.h header checking for pkg-config... (cached) /usr/bin/pkg-config checking for libbrotlidec options with pkg-config... found checking for pkg-config... (cached) /usr/bin/pkg-config checking for libbrotlicommon options with pkg-config... found checking for BrotliDecoderDecompress in -lbrotlidec... yes checking for brotli/decode.h... yes checking for pkg-config... (cached) /usr/bin/pkg-config checking for libzstd options with pkg-config... found checking for ZSTD_createDStream in -lzstd... yes checking for zstd.h... yes checking whether to enable IPv6... yes checking if struct sockaddr_in6 has sin6_scope_id member... yes checking if argv can be written to... yes checking if GSS-API support is requested... no checking whether to enable Windows native SSL/TLS... no checking whether to enable Amiga native SSL/TLS (AmiSSL v5)... no checking for pkg-config... (cached) /usr/bin/pkg-config checking for openssl options with pkg-config... found configure: pkg-config: SSL_LIBS: "-lssl -lcrypto" configure: pkg-config: SSL_LDFLAGS: "" configure: pkg-config: SSL_CPPFLAGS: "" checking for HMAC_Update in -lcrypto... yes checking for SSL_connect in -lssl... yes checking for openssl/x509.h... yes checking for openssl/rsa.h... yes checking for openssl/crypto.h... yes checking for openssl/pem.h... yes checking for openssl/ssl.h... yes checking for openssl/err.h... yes checking for BoringSSL... no checking for AWS-LC... no checking for LibreSSL... no checking for OpenSSL >= v3... yes checking for SSL_set_quic_use_legacy_codepoint... no checking for SSL_set_quic_tls_cbs... no configure: OpenSSL version does not speak any known QUIC API checking for SRP support in OpenSSL... yes checking for QUIC support and OpenSSL >= 3.3... no configure: built with one SSL backend checking default CA cert bundle/path... configure: want unset ca /etc/ssl/certs/ca-certificates.crt /etc/ssl/certs/ca-certificates.crt /etc/ssl/certs (capath) checking whether to use OpenSSL's built-in CA store... no checking CA cert bundle path to embed in the curl tool... no checking for pkg-config... (cached) /usr/bin/pkg-config checking for libpsl options with pkg-config... no checking for psl_builtin in -lpsl... no configure: error: libpsl libs and/or directories were not found where specified!
ASSISTANT
Show reasoning
Evaluating config error
I'm facing an error with the configuration related to libpsl, where it can't find the specified paths. It seems like configure usually wants libpsl if "cookie PSL support" is enabled, but that's optional. This error pops up because I didn’t actually pass any libpsl options, which is puzzling. Checking through the log indicates it's treating libpsl as required, which could be a known bug. Now I'm pondering over what to do next.Addressing libpsl requirement
I’m checking the situation with cURL 8.16.0, which sometimes requires libpsl if it’s built with support—seems like it's flagged by default. I could use the --without-libpsl option to avoid any errors, but technically, libpsl should be optional. However, I’m wondering if other features may still need it. To keep things simple, I think installing libpsl-dev might be the better route. I’ll go ahead and use apt-get install libpsl-dev to make it easier.
compile-bench> sudo DEBIAN_FRONTEND=noninteractive apt-get install -y libpsl-dev
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 3%
Reading package lists... 3%
Reading package lists... 4%
Reading package lists... 4%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 52%
Reading package lists... 52%
Reading package lists... 67%
Reading package lists... 67%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 81%
Reading package lists... 81%
Reading package lists... 96%
Reading package lists... 96%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... Done
Building dependency tree... 0%
Building dependency tree... 0%
Building dependency tree... 50%
Building dependency tree... 50%
Building dependency tree... 91%
Building dependency tree... Done
Reading state information... 0%
Reading state information... 1%
Reading state information... Done
The following NEW packages will be installed:
libpsl-dev
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 77.9 kB of archives.
After this operation, 214 kB of additional disk space will be used.
0% [Working]
Get:1 http://archive.ubuntu.com/ubuntu jammy/main amd64 libpsl-dev amd64 0.21.0-1.2build2 [77.9 kB]
15% [1 libpsl-dev 14.2 kB/77.9 kB 18%]
100% [Working]
Fetched 77.9 kB in 0s (175 kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package libpsl-dev:amd64.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 11669 files and directories currently installed.)
Preparing to unpack .../libpsl-dev_0.21.0-1.2build2_amd64.deb ...
Unpacking libpsl-dev:amd64 (0.21.0-1.2build2) ...
Setting up libpsl-dev:amd64 (0.21.0-1.2build2) ...
↓ 17 lines
compile-bench> sudo DEBIAN_FRONTEND=noninteractive apt-get install -y libpsl-dev
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 3%
Reading package lists... 3%
Reading package lists... 4%
Reading package lists... 4%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 52%
Reading package lists... 52%
Reading package lists... 67%
Reading package lists... 67%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 81%
Reading package lists... 81%
Reading package lists... 96%
Reading package lists... 96%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... Done
Building dependency tree... 0%
Building dependency tree... 0%
Building dependency tree... 50%
Building dependency tree... 50%
Building dependency tree... 91%
Building dependency tree... Done
Reading state information... 0%
Reading state information... 1%
Reading state information... Done
The following NEW packages will be installed:
libpsl-dev
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 77.9 kB of archives.
After this operation, 214 kB of additional disk space will be used.
0% [Working]
Get:1 http://archive.ubuntu.com/ubuntu jammy/main amd64 libpsl-dev amd64 0.21.0-1.2build2 [77.9 kB]
15% [1 libpsl-dev 14.2 kB/77.9 kB 18%]
100% [Working]
Fetched 77.9 kB in 0s (175 kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package libpsl-dev:amd64.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 11669 files and directories currently installed.)
Preparing to unpack .../libpsl-dev_0.21.0-1.2build2_amd64.deb ...
Unpacking libpsl-dev:amd64 (0.21.0-1.2build2) ...
Setting up libpsl-dev:amd64 (0.21.0-1.2build2) ...
ASSISTANT
compile-bench> cd /home/peter/curl-src && ./configure --prefix=/home/peter/result --with-openssl --with-zlib --with-brotli --with-zstd checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for ar... /usr/bin/ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking how to run the C preprocessor... gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for grep that handles long lines and -e... (cached) /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking if OS is AIX (to define _ALL_SOURCE)... no
checking if _THREAD_SAFE is already defin
[command output truncated]
Makefile
config.status: creating tests/server/Makefile
config.status: creating tests/libtest/Makefile
config.status: creating tests/unit/Makefile
config.status: creating tests/tunit/Makefile
config.status: creating tests/http/config.ini
config.status: creating tests/http/Makefile
config.status: creating packages/Makefile
config.status: creating packages/vms/Makefile
config.status: creating libcurl.pc
config.status: creating curl-config
config.status: creating lib/curl_config.h
config.status: executing depfiles commands
config.status: executing libtool commands
configure: Configured to build curl/libcurl:
Host setup: x86_64-pc-linux-gnu
Install prefix: /home/peter/result
Compiler: gcc
CFLAGS: -Werror-implicit-function-declaration -O2 -Wno-system-headers
CFLAGS extras:
CPPFLAGS: -D_GNU_SOURCE
LDFLAGS:
curl-config:
LIBS: -lpsl -lssl -lcrypto -lssl -lcrypto -lzstd -lzstd -lbrotlidec -lbrotlidec -lbrotlicommon -lz
curl version: 8.16.0
SSL: enabled (OpenSSL v3+)
SSH: no (--with-{libssh,libssh2})
zlib: enabled
brotli: enabled (libbrotlidec)
zstd: enabled (libzstd)
GSS-API: no (--with-gssapi)
GSASL: no (libgsasl not found)
TLS-SRP: enabled
resolver: POSIX threaded
IPv6: enabled
Unix sockets: enabled
IDN: no (--with-{libidn2,winidn})
Build docs: enabled (--disable-docs)
Build libcurl: Shared=yes, Static=yes
Built-in manual: enabled
--libcurl option: enabled (--disable-libcurl-option)
Verbose errors: enabled (--disable-verbose)
Code coverage: disabled
SSPI: no (--enable-sspi)
ca cert bundle: /etc/ssl/certs/ca-certificates.crt
ca cert path: /etc/ssl/certs
ca cert embed: no
ca fallback: no
LDAP: no (--enable-ldap / --with-ldap-lib / --with-lber-lib)
LDAPS: no (--enable-ldaps)
IPFS/IPNS: enabled
RTSP: enabled
RTMP: no (--with-librtmp)
PSL: enabled
Alt-svc: enabled (--disable-alt-svc)
Headers API: enabled (--disable-headers-api)
HSTS: enabled (--disable-hsts)
HTTP1: enabled (internal)
HTTP2: no (--with-nghttp2)
HTTP3: no (--with-ngtcp2 --with-nghttp3, --with-quiche, --with-openssl-quic)
ECH: no (--enable-ech)
HTTPS RR: no (--enable-httpsrr)
SSLS-EXPORT: no (--enable-ssls-export)
Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd
↓ 136 lines
compile-bench> cd /home/peter/curl-src && ./configure --prefix=/home/peter/result --with-openssl --with-zlib --with-brotli --with-zstd
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for ar... /usr/bin/ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking how to run the C preprocessor... gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for grep that handles long lines and -e... (cached) /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking if OS is AIX (to define _ALL_SOURCE)... no
checking if _THREAD_SAFE is already defin
[command output truncated]
Makefile
config.status: creating tests/server/Makefile
config.status: creating tests/libtest/Makefile
config.status: creating tests/unit/Makefile
config.status: creating tests/tunit/Makefile
config.status: creating tests/http/config.ini
config.status: creating tests/http/Makefile
config.status: creating packages/Makefile
config.status: creating packages/vms/Makefile
config.status: creating libcurl.pc
config.status: creating curl-config
config.status: creating lib/curl_config.h
config.status: executing depfiles commands
config.status: executing libtool commands
configure: Configured to build curl/libcurl:
Host setup: x86_64-pc-linux-gnu
Install prefix: /home/peter/result
Compiler: gcc
CFLAGS: -Werror-implicit-function-declaration -O2 -Wno-system-headers
CFLAGS extras:
CPPFLAGS: -D_GNU_SOURCE
LDFLAGS:
curl-config:
LIBS: -lpsl -lssl -lcrypto -lssl -lcrypto -lzstd -lzstd -lbrotlidec -lbrotlidec -lbrotlicommon -lz
curl version: 8.16.0
SSL: enabled (OpenSSL v3+)
SSH: no (--with-{libssh,libssh2})
zlib: enabled
brotli: enabled (libbrotlidec)
zstd: enabled (libzstd)
GSS-API: no (--with-gssapi)
GSASL: no (libgsasl not found)
TLS-SRP: enabled
resolver: POSIX threaded
IPv6: enabled
Unix sockets: enabled
IDN: no (--with-{libidn2,winidn})
Build docs: enabled (--disable-docs)
Build libcurl: Shared=yes, Static=yes
Built-in manual: enabled
--libcurl option: enabled (--disable-libcurl-option)
Verbose errors: enabled (--disable-verbose)
Code coverage: disabled
SSPI: no (--enable-sspi)
ca cert bundle: /etc/ssl/certs/ca-certificates.crt
ca cert path: /etc/ssl/certs
ca cert embed: no
ca fallback: no
LDAP: no (--enable-ldap / --with-ldap-lib / --with-lber-lib)
LDAPS: no (--enable-ldaps)
IPFS/IPNS: enabled
RTSP: enabled
RTMP: no (--with-librtmp)
PSL: enabled
Alt-svc: enabled (--disable-alt-svc)
Headers API: enabled (--disable-headers-api)
HSTS: enabled (--disable-hsts)
HTTP1: enabled (internal)
HTTP2: no (--with-nghttp2)
HTTP3: no (--with-ngtcp2 --with-nghttp3, --with-quiche, --with-openssl-quic)
ECH: no (--enable-ech)
HTTPS RR: no (--enable-httpsrr)
SSLS-EXPORT: no (--enable-ssls-export)
Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd
ASSISTANT
Show reasoning
I’m happy to see that the configuration succeeded with SSL and several other features enabled! Now, I need to compile and install the software. I plan to run make -j$(nproc) to utilize all available processing cores, which should speed things up. After that, I'll proceed with make install. I can use a single command to chain these together with &&, ensuring that if the compilation fails, the install won't run.
compile-bench> cd /home/peter/curl-src && make -j"$(nproc)" && make install Making all in lib
make[1]: Entering directory '/home/peter/curl-src/lib'
make all-am
make[2]: Entering directory '/home/peter/curl-src/lib'
CC libcurl_la-altsvc.lo
CC libcurl_la-amigaos.lo
CC libcurl_la-asyn-ares.lo
CC libcurl_la-asyn-base.lo
CC libcurl_la-asyn-thrdd.lo
CC libcurl_la-bufq.lo
CC libcurl_la-bufref.lo
CC libcurl_la-cf-h1-proxy.lo
CC libcurl_la-cf-h2-proxy.lo
CC libcurl_la-cf-haproxy.lo
CC libcurl_la-cf-https-connect.lo
CC libcurl_la-cf-ip-happy.lo
CC libcurl_la-cf-socket.lo
CC libcurl_la-cfilters.lo
CC libcurl_la-conncache.lo
CC libcurl_la-connect.lo
CC libcurl_la-content_encoding.lo
CC libcurl_la-cookie.lo
CC libcurl_la-cshutdn.lo
CC libcurl_la-curl_addrinfo.lo
CC libcurl_la-curl_des.lo
CC libcurl_la-curl_endian.lo
CC libcurl_la-curl_fnmatch.lo
CC libcurl_la-curl_get_line.lo
CC libcurl_la-curl_gethostname.lo
CC libcurl_la-curl_gssapi.lo
CC libcurl_la-curl_memrchr.lo
CC libcurl_la-curl_ntlm_core.lo
CC libcurl_la-curl_range.lo
CC libcurl_la-curl_rtmp.lo
CC libcurl_la-curl_sasl.lo
CC libcurl_la-curl_sha512_256.lo
CC libcurl_la-curl_sspi.lo
CC libcurl_la-curl_threads.lo
CC libcurl_la-curl_trc.lo
CC libcurl_la-cw-out.lo
CC libcurl_la-cw-pause.lo
CC libcurl_la-dict.lo
CC libcurl_la-doh.lo
CC libcurl_la-dynhds.lo
CC libcurl_la-easy.lo
CC libcurl_la-easygetopt.lo
CC libcurl_la-easyoptions.lo
CC libcurl_la-escape.lo
CC libcurl_la-fake_addrinfo.lo
CC libcurl_la-file.lo
CC libcurl_la-fileinfo.lo
CC libcurl_la-fopen.lo
CC libcurl_la-formdata.lo
CC libcurl_la-ftp.lo
CC libcurl_la-ftplistparser.lo
CC libcurl_la-getenv.lo
CC libcurl_la-getinfo.lo
CC libcurl_la-gopher.lo
CC libcurl_la-hash.lo
CC libcurl_la-headers.lo
CC libcurl_la-hmac.lo
CC libcurl_la-hostip.lo
CC libcurl_la-hostip4.lo
CC libcurl_la-hostip6.lo
CC libcurl_la-hsts.lo
CC libcurl_la-http.lo
CC libcurl_la-http1.lo
CC libcurl_la-http2.lo
CC libcurl_la-http_aws_sigv4.lo
CC libcurl_la-http_chunks.lo
CC libcurl_la-http_digest.lo
CC libcurl_la-http_negotiate.lo
CC libcurl_la-http_ntlm.lo
CC libcurl_la-http_proxy.lo
CC libcurl_la-httpsrr.lo
CC libcurl_la-idn.lo
CC libcurl_la-if2ip.lo
CC libcurl_la-imap.lo
CC libcurl_la-krb5.lo
CC libcurl_la-ldap.lo
CC libcurl_la-llist.lo
CC libcurl_la-macos.lo
CC libcurl_la-md4.lo
CC libcurl_la-md5.lo
CC libcurl_la-memdebug.lo
CC
[command output truncated]
hare/man/man3'
make[6]: Leaving directory '/home/peter/curl-src/docs/libcurl/opts'
make[5]: Leaving directory '/home/peter/curl-src/docs/libcurl/opts'
make[5]: Entering directory '/home/peter/curl-src/docs/libcurl'
make[6]: Entering directory '/home/peter/curl-src/docs/libcurl'
make[6]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/home/peter/result/share/aclocal'
/usr/bin/install -c -m 644 libcurl.m4 '/home/peter/result/share/aclocal'
/usr/bin/mkdir -p '/home/peter/result/share/man/man3'
/usr/bin/install -c -m 644 curl_easy_cleanup.3 curl_easy_duphandle.3 curl_easy_escape.3 curl_easy_getinfo.3 curl_easy_header.3 curl_easy_init.3 curl_easy_nextheader.3 curl_easy_option_by_id.3 curl_easy_option_by_name.3 curl_easy_option_next.3 curl_easy_pause.3 curl_easy_perform.3 curl_easy_recv.3 curl_easy_reset.3 curl_easy_send.3 curl_easy_setopt.3 curl_easy_ssls_export.3 curl_easy_ssls_import.3 curl_easy_strerror.3 curl_easy_unescape.3 curl_easy_upkeep.3 curl_escape.3 curl_formadd.3 curl_formfree.3 curl_formget.3 curl_free.3 curl_getdate.3 curl_getenv.3 curl_global_cleanup.3 curl_global_init.3 curl_global_init_mem.3 curl_global_sslset.3 curl_global_trace.3 curl_mime_addpart.3 curl_mime_data.3 curl_mime_data_cb.3 curl_mime_encoder.3 curl_mime_filedata.3 curl_mime_filename.3 curl_mime_free.3 '/home/peter/result/share/man/man3'
/usr/bin/install -c -m 644 curl_mime_headers.3 curl_mime_init.3 curl_mime_name.3 curl_mime_subparts.3 curl_mime_type.3 curl_mprintf.3 curl_multi_add_handle.3 curl_multi_assign.3 curl_multi_cleanup.3 curl_multi_fdset.3 curl_multi_get_handles.3 curl_multi_get_offt.3 curl_multi_info_read.3 curl_multi_init.3 curl_multi_perform.3 curl_multi_poll.3 curl_multi_remove_handle.3 curl_multi_setopt.3 curl_multi_socket.3 curl_multi_socket_action.3 curl_multi_socket_all.3 curl_multi_strerror.3 curl_multi_timeout.3 curl_multi_wait.3 curl_multi_waitfds.3 curl_multi_wakeup.3 curl_pushheader_byname.3 curl_pushheader_bynum.3 curl_share_cleanup.3 curl_share_init.3 curl_share_setopt.3 curl_share_strerror.3 curl_slist_append.3 curl_slist_free_all.3 curl_strequal.3 curl_strnequal.3 curl_unescape.3 curl_url.3 curl_url_cleanup.3 curl_url_dup.3 '/home/peter/result/share/man/man3'
/usr/bin/install -c -m 644 curl_url_get.3 curl_url_set.3 curl_url_strerror.3 curl_version.3 curl_version_info.3 curl_ws_meta.3 curl_ws_recv.3 curl_ws_send.3 curl_ws_start_frame.3 libcurl-easy.3 libcurl-env-dbg.3 libcurl-env.3 libcurl-errors.3 libcurl-multi.3 libcurl-security.3 libcurl-share.3 libcurl-symbols.3 libcurl-thread.3 libcurl-tutorial.3 libcurl-url.3 libcurl-ws.3 libcurl.3 '/home/peter/result/share/man/man3'
make[6]: Leaving directory '/home/peter/curl-src/docs/libcurl'
make[5]: Leaving directory '/home/peter/curl-src/docs/libcurl'
make[4]: Leaving directory '/home/peter/curl-src/docs/libcurl'
make[3]: Leaving directory '/home/peter/curl-src'
make[2]: Leaving directory '/home/peter/curl-src'
make[1]: Leaving directory '/home/peter/curl-src'
↓ 106 lines
compile-bench> cd /home/peter/curl-src && make -j"$(nproc)" && make install
Making all in lib make[1]: Entering directory '/home/peter/curl-src/lib' make all-am make[2]: Entering directory '/home/peter/curl-src/lib' CC libcurl_la-altsvc.lo CC libcurl_la-amigaos.lo CC libcurl_la-asyn-ares.lo CC libcurl_la-asyn-base.lo CC libcurl_la-asyn-thrdd.lo CC libcurl_la-bufq.lo CC libcurl_la-bufref.lo CC libcurl_la-cf-h1-proxy.lo CC libcurl_la-cf-h2-proxy.lo CC libcurl_la-cf-haproxy.lo CC libcurl_la-cf-https-connect.lo CC libcurl_la-cf-ip-happy.lo CC libcurl_la-cf-socket.lo CC libcurl_la-cfilters.lo CC libcurl_la-conncache.lo CC libcurl_la-connect.lo CC libcurl_la-content_encoding.lo CC libcurl_la-cookie.lo CC libcurl_la-cshutdn.lo CC libcurl_la-curl_addrinfo.lo CC libcurl_la-curl_des.lo CC libcurl_la-curl_endian.lo CC libcurl_la-curl_fnmatch.lo CC libcurl_la-curl_get_line.lo CC libcurl_la-curl_gethostname.lo CC libcurl_la-curl_gssapi.lo CC libcurl_la-curl_memrchr.lo CC libcurl_la-curl_ntlm_core.lo CC libcurl_la-curl_range.lo CC libcurl_la-curl_rtmp.lo CC libcurl_la-curl_sasl.lo CC libcurl_la-curl_sha512_256.lo CC libcurl_la-curl_sspi.lo CC libcurl_la-curl_threads.lo CC libcurl_la-curl_trc.lo CC libcurl_la-cw-out.lo CC libcurl_la-cw-pause.lo CC libcurl_la-dict.lo CC libcurl_la-doh.lo CC libcurl_la-dynhds.lo CC libcurl_la-easy.lo CC libcurl_la-easygetopt.lo CC libcurl_la-easyoptions.lo CC libcurl_la-escape.lo CC libcurl_la-fake_addrinfo.lo CC libcurl_la-file.lo CC libcurl_la-fileinfo.lo CC libcurl_la-fopen.lo CC libcurl_la-formdata.lo CC libcurl_la-ftp.lo CC libcurl_la-ftplistparser.lo CC libcurl_la-getenv.lo CC libcurl_la-getinfo.lo CC libcurl_la-gopher.lo CC libcurl_la-hash.lo CC libcurl_la-headers.lo CC libcurl_la-hmac.lo CC libcurl_la-hostip.lo CC libcurl_la-hostip4.lo CC libcurl_la-hostip6.lo CC libcurl_la-hsts.lo CC libcurl_la-http.lo CC libcurl_la-http1.lo CC libcurl_la-http2.lo CC libcurl_la-http_aws_sigv4.lo CC libcurl_la-http_chunks.lo CC libcurl_la-http_digest.lo CC libcurl_la-http_negotiate.lo CC libcurl_la-http_ntlm.lo CC libcurl_la-http_proxy.lo CC libcurl_la-httpsrr.lo CC libcurl_la-idn.lo CC libcurl_la-if2ip.lo CC libcurl_la-imap.lo CC libcurl_la-krb5.lo CC libcurl_la-ldap.lo CC libcurl_la-llist.lo CC libcurl_la-macos.lo CC libcurl_la-md4.lo CC libcurl_la-md5.lo CC libcurl_la-memdebug.lo CC [command output truncated] hare/man/man3' make[6]: Leaving directory '/home/peter/curl-src/docs/libcurl/opts' make[5]: Leaving directory '/home/peter/curl-src/docs/libcurl/opts' make[5]: Entering directory '/home/peter/curl-src/docs/libcurl' make[6]: Entering directory '/home/peter/curl-src/docs/libcurl' make[6]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/home/peter/result/share/aclocal' /usr/bin/install -c -m 644 libcurl.m4 '/home/peter/result/share/aclocal' /usr/bin/mkdir -p '/home/peter/result/share/man/man3' /usr/bin/install -c -m 644 curl_easy_cleanup.3 curl_easy_duphandle.3 curl_easy_escape.3 curl_easy_getinfo.3 curl_easy_header.3 curl_easy_init.3 curl_easy_nextheader.3 curl_easy_option_by_id.3 curl_easy_option_by_name.3 curl_easy_option_next.3 curl_easy_pause.3 curl_easy_perform.3 curl_easy_recv.3 curl_easy_reset.3 curl_easy_send.3 curl_easy_setopt.3 curl_easy_ssls_export.3 curl_easy_ssls_import.3 curl_easy_strerror.3 curl_easy_unescape.3 curl_easy_upkeep.3 curl_escape.3 curl_formadd.3 curl_formfree.3 curl_formget.3 curl_free.3 curl_getdate.3 curl_getenv.3 curl_global_cleanup.3 curl_global_init.3 curl_global_init_mem.3 curl_global_sslset.3 curl_global_trace.3 curl_mime_addpart.3 curl_mime_data.3 curl_mime_data_cb.3 curl_mime_encoder.3 curl_mime_filedata.3 curl_mime_filename.3 curl_mime_free.3 '/home/peter/result/share/man/man3' /usr/bin/install -c -m 644 curl_mime_headers.3 curl_mime_init.3 curl_mime_name.3 curl_mime_subparts.3 curl_mime_type.3 curl_mprintf.3 curl_multi_add_handle.3 curl_multi_assign.3 curl_multi_cleanup.3 curl_multi_fdset.3 curl_multi_get_handles.3 curl_multi_get_offt.3 curl_multi_info_read.3 curl_multi_init.3 curl_multi_perform.3 curl_multi_poll.3 curl_multi_remove_handle.3 curl_multi_setopt.3 curl_multi_socket.3 curl_multi_socket_action.3 curl_multi_socket_all.3 curl_multi_strerror.3 curl_multi_timeout.3 curl_multi_wait.3 curl_multi_waitfds.3 curl_multi_wakeup.3 curl_pushheader_byname.3 curl_pushheader_bynum.3 curl_share_cleanup.3 curl_share_init.3 curl_share_setopt.3 curl_share_strerror.3 curl_slist_append.3 curl_slist_free_all.3 curl_strequal.3 curl_strnequal.3 curl_unescape.3 curl_url.3 curl_url_cleanup.3 curl_url_dup.3 '/home/peter/result/share/man/man3' /usr/bin/install -c -m 644 curl_url_get.3 curl_url_set.3 curl_url_strerror.3 curl_version.3 curl_version_info.3 curl_ws_meta.3 curl_ws_recv.3 curl_ws_send.3 curl_ws_start_frame.3 libcurl-easy.3 libcurl-env-dbg.3 libcurl-env.3 libcurl-errors.3 libcurl-multi.3 libcurl-security.3 libcurl-share.3 libcurl-symbols.3 libcurl-thread.3 libcurl-tutorial.3 libcurl-url.3 libcurl-ws.3 libcurl.3 '/home/peter/result/share/man/man3' make[6]: Leaving directory '/home/peter/curl-src/docs/libcurl' make[5]: Leaving directory '/home/peter/curl-src/docs/libcurl' make[4]: Leaving directory '/home/peter/curl-src/docs/libcurl' make[3]: Leaving directory '/home/peter/curl-src' make[2]: Leaving directory '/home/peter/curl-src' make[1]: Leaving directory '/home/peter/curl-src'
ASSISTANT
compile-bench> ln -sf /home/peter/result/bin/curl /home/peter/result/curl && /home/peter/result/bin/curl -V curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.2 zlib/1.2.11 brotli/1.0.9 zstd/1.4.8 libpsl/0.21.0
Release-Date: 2025-09-10
Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd
↓ 5 lines
compile-bench> ln -sf /home/peter/result/bin/curl /home/peter/result/curl && /home/peter/result/bin/curl -V
curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.2 zlib/1.2.11 brotli/1.0.9 zstd/1.4.8 libpsl/0.21.0 Release-Date: 2025-09-10 Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd
ASSISTANT
compile-bench> (/home/peter/result/bin/curl --help all | grep -F -- '--tlsv1.3') || true
--tlsv1.3 TLSv1.3 or greater
ASSISTANT
compile-bench> ls -l /home/peter/result/curl && ls -l /home/peter/result/bin/curl lrwxrwxrwx 1 peter peter 27 Sep 16 21:41 /home/peter/result/curl -> /home/peter/result/bin/curl
-rwxr-xr-x 1 peter peter 346464 Sep 16 21:41 /home/peter/result/bin/curl
↓ 3 lines
compile-bench> ls -l /home/peter/result/curl && ls -l /home/peter/result/bin/curl
lrwxrwxrwx 1 peter peter 27 Sep 16 21:41 /home/peter/result/curl -> /home/peter/result/bin/curl -rwxr-xr-x 1 peter peter 346464 Sep 16 21:41 /home/peter/result/bin/curl
ASSISTANT
I compiled curl 8.16.0 from /home/peter/curl.tar.gz and installed it to /home/peter/result with SSL (TLSv1.3), brotli, zlib, and zstd enabled. I also created the requested symlink.
What I did:
- Installed build dependencies: build-essential, pkg-config, autoconf, automake, libtool, libssl-dev, zlib1g-dev, libbrotli-dev, libzstd-dev, libpsl-dev
- Extracted sources to /home/peter/curl-src
- Configured with: --prefix=/home/peter/result --with-openssl --with-zlib --with-brotli --with-zstd
- Built and installed
- Created symlink: /home/peter/result/curl -> /home/peter/result/bin/curl
Verification:
- curl -V:
/home/peter/result/bin/curl -V
curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.2 zlib/1.2.11 brotli/1.0.9 zstd/1.4.8 libpsl/0.21.0
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd
- TLS v1.3 option present:
/home/peter/result/bin/curl --help all | grep -F -- '--tlsv1.3'
--tlsv1.3 TLSv1.3 or greater
- Symlink exists and points to the installed binary:
ls -l /home/peter/result/curl
lrwxrwxrwx 1 peter peter 27 ... /home/peter/result/curl -> /home/peter/result/bin/curl
Everything requested has been completed and verified. You can run curl from /home/peter/result/curl.
Task finished successfully, all checks passed!
Checks passed:
curl binary exists
curl version matches expected
curl downloaded the expected local file content
curl HTTPS request to google.com returned content-type: text/html
curl TLSv1.2 connection to google.com used TLSv1.2
curl TLSv1.3 connection to google.com used TLSv1.3
curl brotli compression test passed
curl gzip compression test passed
curl version shows zstd support