<- Ranking
Summary
Task
jq-windows
Model
claude-sonnet-4.5-thinking-16k logo
claude-sonnet-4.5-thinking-16k
Status
Success
Performance
Cost$0.234
Total elapsed time2m25s
LLM inference time1m40s
Command execution time45s
Commands executed23
All details >
Attempt ID l6iv436dh7v3p Attempt group run-29-09-25-19-32
Revision 0cfc533b3f68 AWS Instance m8i.2xlarge
Start time 2025-09-29T17:53:36.395Z End time 2025-09-29T17:56:09.700Z
Task jq-windows Environment ubuntu-22.04-amd64-wine
Model claude-sonnet-4.5-thinking-16k logo claude-sonnet-4.5-thinking-16k OpenRouter slug anthropic/claude-sonnet-4.5
Temperature 1 Explicit prompt caching true
User msg after tool call true Max tool calls 100
Total timeout seconds 2400 Single command timeout 1200
Cost $0.234 Duration 2m25s
LLM inference time 1m40s Command execution time 45s
Final context tokens 26,287 Total output tokens 3,859
Output reasoning tokens 1,362 Messages 44
Assistant messages 19 User messages 1
System messages 1 Commands executed 23
Download full attempt result JSON
Task
Task: jq-windows

jq 1.8.1 is a command-line JSON utility for viewing and transforming JSON.
Project link: github.com/jqlang/jq

Task:
Compile and install jq to a specific location. Cross-compile to Windows, link it statically.

Difficulties:
Cross-compilation to Windows, setting up the cross-compilation toolchain (compilers, etc), making sure that there are no dynamic libraries.

Environment:
Ubuntu 22.04 on amd64, with internet access.

View task page
Execution log
SYSTEM

You are a package-building specialist operating a Ubuntu 22.04 bash shell via one tool: run_terminal_cmd.
The current working directory of every run_terminal_cmd is /home/peter.
Execution rules:
- Always pass non-interactive flags for any command that could prompt (e.g., -y, --yes, DEBIAN_FRONTEND=noninteractive).
- Don't include any newlines in the command.
- You can use sudo.
If you encounter any errors or issues while doing the user's request, you must fix them and continue the task.
At the end verify you did the user request correctly.

USER

You are given jq v1.8.1 source code at jq.tar.gz. Please compile the jq package for amd64 Windows and install it to /home/peter/result/jq.exe. Build it statically.

ASSISTANT
Show reasoning

The user wants me to:
1. Extract jq v1.8.1 source code from jq.tar.gz
2. Compile it for amd64 Windows (cross-compilation from Linux)
3. Build it statically
4. Install the resulting executable to /home/peter/result/jq.exe

This is a cross-compilation task. I'll need to:
1. Extract the tarball
2. Install cross-compilation tools (mingw-w64 for Windows builds)
3. Configure and build jq for Windows
4. Ensure it's built statically
5. Copy the result to /home/peter/result/jq.exe

Let me start by extracting the tarball and seeing what's inside.

I'll help you compile jq v1.8.1 for Windows amd64. Let me start by extracting the source code and setting up the cross-compilation environment.

compile-bench> cd /home/peter && tar -tzf jq.tar.gz | head -20
jq-1.8.1/
jq-1.8.1/jq.1
jq-1.8.1/configure
jq-1.8.1/config/
jq-1.8.1/config/test-driver
jq-1.8.1/config/config.sub
jq-1.8.1/config/ar-lib
jq-1.8.1/config/missing
jq-1.8.1/config/compile
jq-1.8.1/config/ltmain.sh
jq-1.8.1/config/m4/
jq-1.8.1/config/m4/find-func-no-libs2.m4
jq-1.8.1/config/m4/libtool.m4
jq-1.8.1/config/m4/find-func.m4
jq-1.8.1/config/m4/ltoptions.m4
jq-1.8.1/config/m4/ltsugar.m4
jq-1.8.1/config/m4/find-func-no-libs.m4
jq-1.8.1/config/m4/lt~obsolete.m4
jq-1.8.1/config/m4/ltversion.m4
jq-1.8.1/config/m4/misc.m4
↓ 21 lines
compile-bench> cd /home/peter && tar -xzf jq.tar.gz
[empty output]
ASSISTANT
Show reasoning

The user wants me to compile jq v1.8.1 for Windows amd64 and install it statically. I've extracted the tarball. Now I need to:

1. Install the necessary cross-compilation tools for Windows (mingw-w64)
2. Configure jq with the appropriate cross-compilation settings
3. Build it statically
4. Install the result to /home/peter/result/jq.exe

Let me proceed with the installation of mingw-w64 and then configure and build jq.

Now let me install the cross-compilation tools for Windows and build jq:

compile-bench> sudo apt-get update -y
0% [Working]
            
Get:1 http://security.ubuntu.com/ubuntu jammy-security InRelease [129 kB]

0% [Connecting to archive.ubuntu.com (185.125.190.82)] [1 InRelease 14.2 kB/129
                                                                               
0% [Waiting for headers]
0% [Waiting for headers]
                        
Hit:2 http://archive.ubuntu.com/ubuntu jammy InRelease

0% [Waiting for headers] [Waiting for headers]
                                              
Get:3 http://security.ubuntu.com/ubuntu jammy-security/multiverse amd64 Packages [71.0 kB]

0% [Waiting for headers] [3 Packages 7002 B/71.0 kB 10%]
                                                        
0% [Waiting for headers]
0% [3 Packages store 0 B] [Waiting for headers] [Waiting for headers]
                                                                     
0% [Waiting for headers] [Waiting for headers]
                                              
Get:4 http://security.ubuntu.com/ubuntu jammy-security/universe amd64 Packages [1274 kB]

0% [Waiting for headers] [4 Packages 6999 B/1274 kB 1%]
0% [Waiting for headers] [4 Packages 86.6 kB/1274 kB 7%]
                                                        
Get:5 http://archive.ubuntu.com/ubuntu jammy-updates InRelease [128 kB]

0% [5 InRelease 12.7 kB/128 kB 10%] [4 Packages 508 kB/1274 kB 40%]
                                                                   
Get:6 http://security.ubuntu.com/ubuntu jammy-security/main amd64 Packages [3371 kB]

0% [5 InRelease 15.6 kB/128 kB 12%] [6 Packages 28.4 kB/3371 kB 1%]
0% [4 Packages store 0 B] [5 InRelease 15.6 kB/128 kB 12%] [6 Packages 28.4 kB/
                                                                               
0% [5 InRelease 15.6 kB/128 kB 12%] [6 Packages 3322 kB/3371 kB 99%]
                                                                    
0% [5 InRelease 15.6 kB/128 kB 12%] [Waiting for headers]
                                                         
Get:7 http://security.ubuntu.com/ubuntu jammy-security/restricted amd64 Packages [5609 kB]

0% [5 InRelease 15.6 kB/128 kB 12%] [7 Packages 11.6 kB/5609 kB 0%]
0% [6 Packages store 0 B] [5 InRelease 15.6 kB/128 kB 12%] [7 Packages 57.3 kB/
                                                                               
0% [6 Packages store 0 B] [5 InRelease 21.4 kB/128 kB 17%]
                                                          
0% [5 InRelease 47.5 kB/128 kB 37%]
0% [7 Packages store 0 B] [5 InRelease 47.5 kB/128 kB 37%]
                                                          
0% [7 Packages store 0 B]
                         
0% [Waiting for headers]
0% [Waiting for headers]
                        
Get:8 http://archive.ubuntu.com/ubuntu jammy-backports InRelease [127 kB]

0% [8 InRelease 2588 B/127 kB 2%]
                                 
0% [Working]
56% [Waiting for headers]
                         
Get:9 http://archive.ubuntu.com/ubuntu jammy-updates/restricted amd64 Packages [5804 kB]

56% [9 Packages 2655 B/5804 kB 0%]
75% [9 Packages 5145 kB/5804 kB 89%]
                                    
78% [Waiting for headers]
                         
Get:10 http://archive.ubuntu.com/ubuntu jammy-updates/multiverse amd64 Packages [69.1 kB]

78% [10 Packages 69.1 kB/69.1 kB 100%]
                                      
78% [Working]
78% [9 Packages store 0 B] [Waiting for headers]
                                                
Get:11 http://archive.ubuntu.com/ubuntu jammy-updates/universe amd64 Packages [1577 kB]

78% [9 Packages store 0 B] [11 Packages 2717 B/1577 kB 0%]
                                                          
Get:12 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 Packages [3690 kB]

84% [9 Packages store 0 B] [12 Packages 22.7 kB/3690 kB 1%]
                                                           
Get:13 http://archive.ubuntu.com/ubuntu jammy-backports/universe amd64 Packages [35.2 kB]

97% [9 Packages store 0 B] [13 Packages 35.2 kB/35.2 kB 100%]
                                                             
97% [9 Packages store 0 B]
                          
98% [Working]
98% [10 Packages store 0 B]
                           
98% [Working]
98% [11 Packages store 0 B]
                           
99% [Working]
99% [12 Packages store 0 B]
                           
99% [Working]
99% [13 Packages store 0 B]
                           
100% [Working]
              
Fetched 21.9 MB in 2s (12.7 MB/s)

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 3%

Reading package lists... 3%

Reading package lists... 4%

Reading package lists... 4%

Reading package lists... 41%

Reading package lists... 41%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 51%

Reading package lists... 51%

Reading package lists... 67%

Reading package lists... 67%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 80%

Reading package lists... 80%

Reading package lists... 96%

Reading package lists... 96%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... Done
↓ 16 lines
ASSISTANT
Show reasoning

The user wants me to compile jq for Windows amd64 statically. Let me continue by installing the necessary cross-compilation tools.

compile-bench> sudo DEBIAN_FRONTEND=noninteractive apt-get install -y mingw-w64 autoconf automake libtool make
Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 3%

Reading package lists... 3%

Reading package lists... 4%

Reading package lists... 4%

Reading package lists... 41%

Reading package lists... 41%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 51%

Reading package lists... 51%

Reading package lists... 67%

Reading package lists... 67%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 80%

Reading package lists... 80%

Reading package lists... 96%

Reading package lists... 96%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... Done


Building dependency tree... 0%

Building dependency tree... 0%

Building dependency tree... 50%

Building dependency tree... 50%

Building dependency tree... 88%

Building dependency tree... Done


Reading state information... 0% 

Reading state information... 0%

Reading state information... Done

make is already the newest version (4.3-4.1build1).
make set to manually installed.
The following additional packages will be installed:
  autotools-dev binutils-mingw-w64-i686 binutils-mingw-w64-x86-64
  g++-mingw-w64 g++-mingw-w64-i686 g++-mingw-w64-i686-posix
  g++-mingw-w64-i686-win32 g++-mingw-w64-x86-64 g++-mingw-w64-x86-64-posix
  g++-mingw-w64-x86-64-win32 gcc-mingw-w64 gcc-mingw-w64-base
  gcc-mingw-w64-i686 gcc-mingw-w64-i686-posix gcc-mingw-w64-i686-posix-runtime
  gcc-mingw-w64-i686-win32 gcc-mingw-w64-i686-win32-runtime
  gcc-mingw-w64-x86-64 gcc-mingw-w64-x86-64-posix
  gcc-mingw-w64-x86-64-posix-runtime gcc-mingw-w64-x86-64-win32
  gcc-mingw-w64-x86-64-win32-runtime libltdl-dev libsigsegv2 m4
  mingw-w64-common mingw-w64-i686-dev mingw-w64-x86-64-dev
Suggested packages:
  autoconf-archive gnu-standards autoconf-doc gettext gcc-10-locales
  libtool-doc gfortran | fortran95-compiler gcj-jdk m4-doc
The following NEW packages will be installed:
  autoconf automake autotools-dev binutils-mingw-w64-i686
  binutils-mingw-w64-x86-64 g++-mingw-w64 g++-mingw-w64-i686
  g++-mingw-w64-i686-posix g++-mingw-w64-i686-win32 g++-mingw-w64-x86-64
  g++-mingw-w64-x86-64-posix g++-mingw-w64-x86-64-win32 gcc-mingw-w64
  gcc-mingw-w64-base gcc-mingw-w64-i686 gcc-mingw-w64-i686-posix
  gcc-mingw-w64-i686-posix-runtime gcc-mingw-w64-i686-win32
  gcc-mingw-w64-i686-win32-runtime gcc-mingw-w64-x86-64
  gcc-mingw-w64-x86-64-posix gcc-mingw-w64-x86-64-posix-runtime
  gcc-mingw-w64-x86-64-win32 gcc-mingw-w64-x86-64-win32-runtime libltdl-dev
  libsigsegv2 libtool m4 mingw-w64 mingw-w64-common mingw-w64-i686-dev
  mingw-w64-x86-64-dev
0 upgraded, 32 newly installed, 0 to remove and 14 not upgraded.

[command output truncated]
/x86_64-w64-mingw32-gcc-posix to provide /usr/bin/x86_64-w64-mingw32-gcc (x86_64-w64-mingw32-gcc) in auto mode
Setting up gcc-mingw-w64-x86-64-win32 (10.3.0-14ubuntu1+24.3) ...
update-alternatives: using /usr/bin/x86_64-w64-mingw32-gcc-win32 to provide /usr/bin/x86_64-w64-mingw32-gcc (x86_64-w64-mingw32-gcc) in auto mode
Setting up gcc-mingw-w64-x86-64 (10.3.0-14ubuntu1+24.3) ...
update-alternatives: warning: forcing reinstallation of alternative /usr/bin/x86_64-w64-mingw32-gcc-win32 because link group x86_64-w64-mingw32-gcc is broken
update-alternatives: warning: skip creation of /usr/bin/x86_64-w64-mingw32-gcc-8 because associated file /usr/bin/x86_64-w64-mingw32-gcc-8.3-win32 (of link group x86_64-w64-mingw32-gcc) doesn't exist
Setting up autoconf (2.71-2) ...
Setting up mingw-w64-i686-dev (8.0.0-1) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/automake.1.gz because associated file /usr/share/man/man1/automake-1.16.1.gz (of link group automake) doesn't exist
update-alternatives: warning: skip creation of /usr/share/man/man1/aclocal.1.gz because associated file /usr/share/man/man1/aclocal-1.16.1.gz (of link group automake) doesn't exist
Setting up gcc-mingw-w64-i686-win32 (10.3.0-14ubuntu1+24.3) ...
update-alternatives: using /usr/bin/i686-w64-mingw32-gcc-win32 to provide /usr/bin/i686-w64-mingw32-gcc (i686-w64-mingw32-gcc) in auto mode
Setting up g++-mingw-w64-i686-win32 (10.3.0-14ubuntu1+24.3) ...
update-alternatives: using /usr/bin/i686-w64-mingw32-g++-win32 to provide /usr/bin/i686-w64-mingw32-g++ (i686-w64-mingw32-g++) in auto mode
Setting up g++-mingw-w64-x86-64-win32 (10.3.0-14ubuntu1+24.3) ...
update-alternatives: using /usr/bin/x86_64-w64-mingw32-g++-win32 to provide /usr/bin/x86_64-w64-mingw32-g++ (x86_64-w64-mingw32-g++) in auto mode
Setting up gcc-mingw-w64-i686-posix (10.3.0-14ubuntu1+24.3) ...
Setting up g++-mingw-w64-x86-64-posix (10.3.0-14ubuntu1+24.3) ...
Setting up gcc-mingw-w64-i686 (10.3.0-14ubuntu1+24.3) ...
update-alternatives: warning: forcing reinstallation of alternative /usr/bin/i686-w64-mingw32-gcc-win32 because link group i686-w64-mingw32-gcc is broken
update-alternatives: warning: skip creation of /usr/bin/i686-w64-mingw32-gcc-8 because associated file /usr/bin/i686-w64-mingw32-gcc-8.3-win32 (of link group i686-w64-mingw32-gcc) doesn't exist
Setting up libltdl-dev:amd64 (2.4.6-15build2) ...
Setting up g++-mingw-w64-x86-64 (10.3.0-14ubuntu1+24.3) ...
Setting up gcc-mingw-w64 (10.3.0-14ubuntu1+24.3) ...
Setting up g++-mingw-w64-i686-posix (10.3.0-14ubuntu1+24.3) ...
Setting up g++-mingw-w64-i686 (10.3.0-14ubuntu1+24.3) ...
Setting up g++-mingw-w64 (10.3.0-14ubuntu1+24.3) ...
Setting up mingw-w64 (8.0.0-1) ...
Processing triggers for libwine:amd64 (6.0.3~repack-1) ...
Processing triggers for libc-bin (2.35-0ubuntu3.10) ...
↓ 67 lines
ASSISTANT
Show reasoning

Good! Now I have the mingw-w64 cross-compiler installed. Let me navigate to the jq source directory and check what's there, then configure and build it for Windows.

I need to:
1. Navigate to the jq source directory
2. Check the build instructions
3. Configure with the mingw cross-compiler for Windows amd64
4. Build statically
5. Install to /home/peter/result/jq.exe

Let me start by checking the directory and README or INSTALL files.

compile-bench> cd /home/peter/jq-1.8.1 && ls -la
total 1184
drwxr-xr-x 9 peter peter   4096 Jul  1 11:40 .
drwxr-x--- 1 peter peter   4096 Sep 29 17:53 ..
-rw-r--r-- 1 peter peter  10686 Jul  1 11:39 AUTHORS
-rw-r--r-- 1 peter peter   7887 Jul  1 11:39 COPYING
-rw-r--r-- 1 peter peter  33286 Jul  1 11:39 ChangeLog
-rw-r--r-- 1 peter peter   9090 Jul  1 11:39 Makefile.am
-rw-r--r-- 1 peter peter  75461 Jul  1 11:39 Makefile.in
-rw-r--r-- 1 peter peter  24670 Jul  1 11:39 NEWS.md
-rw-r--r-- 1 peter peter   2434 Jul  1 11:39 README.md
-rw-r--r-- 1 peter peter  46459 Jul  1 11:39 aclocal.m4
drwxr-xr-x 3 peter peter   4096 Jul  1 11:40 config
-rwxr-xr-x 1 peter peter 665647 Jul  1 11:39 configure
-rw-r--r-- 1 peter peter   9881 Jul  1 11:39 configure.ac
drwxr-xr-x 5 peter peter   4096 Jul  1 11:40 docs
-rw-r--r-- 1 peter peter 124253 Jul  1 11:39 jq.1
-rw-r--r-- 1 peter peter 124253 Jul  1 11:39 jq.1.prebuilt
-rw-r--r-- 1 peter peter   1431 Jul  1 11:39 jq.spec
-rw-r--r-- 1 peter peter    255 Jul  1 11:39 libjq.pc
-rw-r--r-- 1 peter peter    246 Jul  1 11:39 libjq.pc.in
drwxr-xr-x 2 peter peter   4096 Jul  1 11:40 m4
drwxr-xr-x 2 peter peter   4096 Jul  1 11:40 scripts
drwxr-xr-x 2 peter peter   4096 Jul  1 11:40 src
drwxr-xr-x 4 peter peter   4096 Jul  1 11:40 tests
drwxr-xr-x 4 peter peter   4096 Jul  1 11:40 vendor
↓ 26 lines
ASSISTANT
Show reasoning

Now I need to configure and build jq for Windows. Let me check what's in the configure script and build it with the mingw-w64 cross-compiler for Windows amd64. I need to:

1. Configure jq with the Windows cross-compiler
2. Build it statically
3. Install it to /home/peter/result/jq.exe

Let me configure with the x86_64-w64-mingw32 toolchain.

compile-bench> mkdir -p /home/peter/result
[empty output]
compile-bench> cd /home/peter/jq-1.8.1 && ./configure --host=x86_64-w64-mingw32 --enable-static --disable-shared LDFLAGS="-static"
checking for x86_64-w64-mingw32-gcc... x86_64-w64-mingw32-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.exe
checking for suffix of executables... .exe
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether x86_64-w64-mingw32-gcc accepts -g... yes
checking for x86_64-w64-mingw32-gcc option to enable C11 features... none needed
checking whether x86_64-w64-mingw32-gcc understands -c and -o together... yes
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for wchar.h... yes
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for x86_64-w64-mingw32-strip... x86_64-w64-mingw32-strip
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking whether make supports nested variables... yes
checking dependency style of x86_64-w64-mingw32-gcc... gcc3
checking whether make supports nested variables... (cached) yes
checking for x86_64-w64-mingw32-ar... x86_64-w64-mingw32-ar
checking the archiver (x86_64-w64-mingw32-ar) interface... ar
checking whether to enable maintainer-specific portions of Makefiles... no
checking for x86_64-w64-mingw32-gcc... (cached) x86_64-w64-mingw32-gcc
checking whether the compiler supports GNU C... (cached) yes
checking whether x86_64-w64-mingw32-gcc accepts -g... (cached) yes
checking for x86_64-w64-mingw32-gcc option to enable C11 features... (cached) none needed
checking whether x86_64-w64-mingw32-gcc understands -c and -o together... (cached) yes
checking how to run the C preprocessor... x86_64-w64-mingw32-gcc -E
checking for bison... no
checking for byacc... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-w64-mingw32
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by x86_64-w64-mingw32-gcc... /usr/bin/x86_64-w64-mingw32-ld
checking if the linker (/usr/bin/x86_64-w64-mingw32-ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/x86_64-w64-mingw32-nm -B
checking the name lister (/usr/bin/x86_64-w64-mingw32-nm -B) interface... BSD n
[command output truncated]
efixed with host triplet
checking for x86_64-w64-mingw32-objdump... x86_64-w64-mingw32-objdump
checking how to recognize dependent libraries... file_magic ^x86 archive import|^x86 DLL
checking for x86_64-w64-mingw32-dlltool... x86_64-w64-mingw32-dlltool
checking how to associate runtime and link libraries... func_cygming_dll_for_implib
checking for x86_64-w64-mingw32-ar... x86_64-w64-mingw32-ar
checking for archiver @FILE support... @
checking for x86_64-w64-mingw32-strip... (cached) x86_64-w64-mingw32-strip
checking for x86_64-w64-mingw32-ranlib... x86_64-w64-mingw32-ranlib
checking command to parse /usr/bin/x86_64-w64-mingw32-nm -B output from x86_64-w64-mingw32-gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for x86_64-w64-mingw32-mt... no
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... no
checking for objdir... .libs
checking if x86_64-w64-mingw32-gcc supports -fno-rtti -fno-exceptions... no
checking for x86_64-w64-mingw32-gcc option to produce PIC... -DDLL_EXPORT -DPIC
checking if x86_64-w64-mingw32-gcc PIC flag -DDLL_EXPORT -DPIC works... yes
checking if x86_64-w64-mingw32-gcc static flag -static works... yes
checking if x86_64-w64-mingw32-gcc supports -c -o file.o... yes
checking if x86_64-w64-mingw32-gcc supports -c -o file.o... (cached) yes
checking whether the x86_64-w64-mingw32-gcc linker (/usr/bin/x86_64-w64-mingw32-ld) supports shared libraries... yes
checking dynamic linker characteristics... Win32 ld.exe
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... no
checking whether to build static libraries... yes
checking whether make sets $(MAKE)... (cached) yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking for sys/times.h... no
checking size of int... 4
checking size of long... 4
checking size of long long... 8
checking size of void*... 8
checking for size_t... yes
checking for working alloca.h... no
checking for alloca... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating test/Makefile
config.status: creating sample/Makefile
config.status: creating onig-config
config.status: creating src/config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default commands
↓ 120 lines
ASSISTANT
Show reasoning

Good! The configure script ran successfully. Now let me build jq. I need to run make to compile it.

compile-bench> cd /home/peter/jq-1.8.1 && make -j$(nproc)
mkdir -p src
mkdir -p src
  GEN      src/builtin.inc
  GEN      src/config_opts.inc
mkdir -p src
  GEN      src/version.h
make  all-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making all in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making all in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make  all-am
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c -o regparse.lo regparse.c
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c -o regcomp.lo regcomp.c
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c -o regexec.lo regexec.c
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c -o regenc.lo regenc.c
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c -o regerror.lo regerror.c
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regext.lo -MD -MP -MF .deps/regext.Tpo -c -o regext.lo regext.c
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c -o regsyntax.lo regsyntax.c
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regtrav.lo -MD -MP -MF .deps/regtrav.Tpo -c -o regtrav.lo regtrav.c
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c regcomp.c -o regcomp.o
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c regparse.c -o regparse.o
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c regexec.c -o regexec.o
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c regenc.c -o regenc.o
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regext.lo -MD -MP -MF .deps/regext.Tpo -c regext.c -o regext.o
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c regerror.c -o regerror.o
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regsyntax.lo -MD -MP -MF .d
[command output truncated]
llowed in x86_64-w64-mingw32 shared libraries; building static only
libtool: link: x86_64-w64-mingw32-ar cr .libs/libonig.a  regparse.o regcomp.o regexec.o regenc.o regerror.o regext.o regsyntax.o regtrav.o regversion.o st.o reggnu.o unicode.o unicode_unfold_key.o unicode_fold1_key.o unicode_fold2_key.o unicode_fold3_key.o ascii.o utf8.o utf16_be.o utf16_le.o utf32_be.o utf32_le.o euc_jp.o euc_jp_prop.o sjis.o sjis_prop.o iso8859_1.o iso8859_2.o iso8859_3.o iso8859_4.o iso8859_5.o iso8859_6.o iso8859_7.o iso8859_8.o iso8859_9.o iso8859_10.o iso8859_11.o iso8859_13.o iso8859_14.o iso8859_15.o iso8859_16.o euc_tw.o euc_kr.o big5.o gb18030.o koi8_r.o cp1251.o onig_init.o
libtool: link: x86_64-w64-mingw32-ranlib .libs/libonig.a
libtool: link: ( cd ".libs" && rm -f "libonig.la" && ln -s "../libonig.la" "libonig.la" )
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making all in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making all in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
sed -e 's,[@]datadir[@],/usr/local/share,g' -e 's,[@]datarootdir[@],/usr/local/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/usr/local,g' -e 's,[@]exec_prefix[@],/usr/local,g' -e 's,[@]libdir[@],/usr/local/lib,g' -e 's,[@]includedir[@],/usr/local/include,g' < ./oniguruma.pc.in > oniguruma.pc
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
  CC       src/builtin.lo
  CC       src/bytecode.lo
  CC       src/compile.lo
  CC       src/execute.lo
  CC       src/jq_test.lo
  CC       src/jv.lo
  CC       src/jv_alloc.lo
  CC       src/jv_aux.lo
  CC       src/jv_dtoa.lo
  CC       src/jv_file.lo
  CC       src/jv_parse.lo
  CC       src/jv_print.lo
  CC       src/jv_unicode.lo
  CC       src/linker.lo
  CC       src/locfile.lo
  CC       src/util.lo
  CC       src/jv_dtoa_tsd.lo
  CC       vendor/decNumber/decContext.lo
  CC       vendor/decNumber/decNumber.lo
  CC       src/lexer.lo
  CC       src/parser.lo
mkdir -p src
  GEN      src/version.h
  CC       src/main.o
src/main.c:21:1: warning: function declaration isn't a prototype [ttps://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wstrict-prototypes-Wstrict-prototypes]8;;]
   21 | extern void jv_tsd_dtoa_ctx_init();
      | ^~~~~~
  CCLD     libjq.la
  CCLD     jq.exe
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 81 lines
ASSISTANT
Show reasoning

Good! The build completed successfully. Now I need to copy the jq.exe file to /home/peter/result/jq.exe. Let me first check if the jq.exe file exists in the build directory.

compile-bench> ls -lh /home/peter/jq-1.8.1/jq.exe
-rwxr-xr-x 1 peter peter 4.1M Sep 29 17:54 /home/peter/jq-1.8.1/jq.exe
ASSISTANT
Show reasoning

Good! The jq.exe file has been built. Now I need to copy it to the requested location /home/peter/result/jq.exe. Let me also verify that it's statically linked by checking what dependencies it has.

compile-bench> cp /home/peter/jq-1.8.1/jq.exe /home/peter/result/jq.exe
[empty output]
compile-bench> x86_64-w64-mingw32-objdump -p /home/peter/result/jq.exe | grep "DLL Name"
	DLL Name: KERNEL32.dll
	DLL Name: msvcrt.dll
	DLL Name: libwinpthread-1.dll
	DLL Name: SHLWAPI.dll
↓ 5 lines
ASSISTANT
Show reasoning

The executable is showing some DLL dependencies. The user requested a statically built jq, but we're still seeing dependencies on KERNEL32.dll, msvcrt.dll, libwinpthread-1.dll, and SHLWAPI.dll.

KERNEL32.dll and msvcrt.dll are standard Windows system DLLs that are always present, so those are acceptable. However, libwinpthread-1.dll is a MinGW library that might not be present on all systems. We should build it truly statically by linking statically against pthread.

Let me rebuild with better static linking flags to ensure we link libwinpthread statically.

I see the executable has a dependency on libwinpthread-1.dll. Let me rebuild it with full static linking to eliminate all non-system DLL dependencies:

compile-bench> cd /home/peter/jq-1.8.1 && make clean
Making clean in vendor/oniguruma
make[1]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making clean in src
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
test -z "libonig.la" || rm -f libonig.la
rm -f ./so_locations
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making clean in test
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
 rm -f test_utf8.exe test_syntax.exe test_options.exe testc.exe testcu.exe test_regset.exe test_back.exe
 rm -f test_utf8 test_syntax test_options testc testcu test_regset test_back
rm -rf .libs _libs
rm -f *.o
test -z "test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log" || rm -f test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log
test -z "test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs" || rm -f test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making clean in sample
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
 rm -f encode.exe listcap.exe names.exe simple.exe sql.exe syntax.exe user_property.exe callout.exe echo.exe count.exe bug_fix.exe regset.exe scan.exe callback_each_match.exe
 rm -f encode listcap names simple sql syntax user_property callout echo count bug_fix regset scan callback_each_match
rm -rf .libs _libs
rm -f *.o
test -z "encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log" || rm -f encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log
test -z "encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs" || rm -f encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Entering directory '/home/peter/jq-1.8.1'
 rm -f jq.exe
 rm -f jq
test -z "src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1" || rm -f src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1
test -z "libjq.la " || rm -f libjq.la 
rm -f ./so_locations
rm -rf .libs _libs
rm -rf src/.libs src/_libs
rm -rf vendor/decNumber/.libs vendor/decNumber/_libs
rm -f *.o
rm -f src/*.o
rm -f src/*.lo
rm -f vendor/decNumber/*.o
rm -f vendor/decNumber/*.lo
test -z "tests/mantest.log tests/jqtest.log tests/shtest.log tests/utf8test.log tests/base64test.log tests/uritest.log tests/onigtest.log tests/manonigtest.log" || rm -f tests/mantest.log tests/jqtest.log tests/shtest.log tests/utf8test.log tests/base64test.log tests/uritest.log tests/onigtest.log tests/manonigtest.log
test -z "tests/mantest.trs tests/jqtest.trs tests/shtest.trs tests/utf8test.trs tests/base64test.trs tests/uritest.trs tests/onigtest.trs tests/manonigtest.trs" || rm -f tests/mantest.trs tests/jqtest.trs tests/shtest.trs tests/utf8test.trs tests/base64test.trs tests/uritest.trs tests/onigtest.trs tests/manonigtest.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 57 lines
ASSISTANT
Show reasoning

The executable has a dependency on libwinpthread-1.dll. I need to rebuild with static linking for pthread as well. Let me reconfigure with additional flags to ensure all libraries are statically linked, including pthread.

compile-bench> cd /home/peter/jq-1.8.1 && ./configure --host=x86_64-w64-mingw32 --enable-static --disable-shared LDFLAGS="-static -static-libgcc -lpthread" CFLAGS="-D__USE_MINGW_ANSI_STDIO"
checking for x86_64-w64-mingw32-gcc... x86_64-w64-mingw32-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.exe
checking for suffix of executables... .exe
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether x86_64-w64-mingw32-gcc accepts -g... yes
checking for x86_64-w64-mingw32-gcc option to enable C11 features... none needed
checking whether x86_64-w64-mingw32-gcc understands -c and -o together... yes
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for wchar.h... yes
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for x86_64-w64-mingw32-strip... x86_64-w64-mingw32-strip
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking whether make supports nested variables... yes
checking dependency style of x86_64-w64-mingw32-gcc... gcc3
checking whether make supports nested variables... (cached) yes
checking for x86_64-w64-mingw32-ar... x86_64-w64-mingw32-ar
checking the archiver (x86_64-w64-mingw32-ar) interface... ar
checking whether to enable maintainer-specific portions of Makefiles... no
checking for x86_64-w64-mingw32-gcc... (cached) x86_64-w64-mingw32-gcc
checking whether the compiler supports GNU C... (cached) yes
checking whether x86_64-w64-mingw32-gcc accepts -g... (cached) yes
checking for x86_64-w64-mingw32-gcc option to enable C11 features... (cached) none needed
checking whether x86_64-w64-mingw32-gcc understands -c and -o together... (cached) yes
checking how to run the C preprocessor... x86_64-w64-mingw32-gcc -E
checking for bison... no
checking for byacc... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-w64-mingw32
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by x86_64-w64-mingw32-gcc... /usr/bin/x86_64-w64-mingw32-ld
checking if the linker (/usr/bin/x86_64-w64-mingw32-ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/x86_64-w64-mingw32-nm -B
checking the name lister (/usr/bin/x86_64-w64-mingw32-nm -B) interface... BSD n
[command output truncated]
_64-w64-mingw32-objdump... x86_64-w64-mingw32-objdump
checking how to recognize dependent libraries... file_magic ^x86 archive import|^x86 DLL
checking for x86_64-w64-mingw32-dlltool... x86_64-w64-mingw32-dlltool
checking how to associate runtime and link libraries... func_cygming_dll_for_implib
checking for x86_64-w64-mingw32-ar... x86_64-w64-mingw32-ar
checking for archiver @FILE support... @
checking for x86_64-w64-mingw32-strip... (cached) x86_64-w64-mingw32-strip
checking for x86_64-w64-mingw32-ranlib... x86_64-w64-mingw32-ranlib
checking command to parse /usr/bin/x86_64-w64-mingw32-nm -B output from x86_64-w64-mingw32-gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for x86_64-w64-mingw32-mt... no
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... no
checking for objdir... .libs
checking if x86_64-w64-mingw32-gcc supports -fno-rtti -fno-exceptions... no
checking for x86_64-w64-mingw32-gcc option to produce PIC... -DDLL_EXPORT -DPIC
checking if x86_64-w64-mingw32-gcc PIC flag -DDLL_EXPORT -DPIC works... yes
checking if x86_64-w64-mingw32-gcc static flag -static works... yes
checking if x86_64-w64-mingw32-gcc supports -c -o file.o... yes
checking if x86_64-w64-mingw32-gcc supports -c -o file.o... (cached) yes
checking whether the x86_64-w64-mingw32-gcc linker (/usr/bin/x86_64-w64-mingw32-ld) supports shared libraries... yes
checking dynamic linker characteristics... Win32 ld.exe
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... no
checking whether to build static libraries... yes
checking whether make sets $(MAKE)... (cached) yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking for sys/times.h... no
checking size of int... 4
checking size of long... 4
checking size of long long... 8
checking size of void*... 8
checking for size_t... yes
checking for working alloca.h... no
checking for alloca... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating test/Makefile
config.status: creating sample/Makefile
config.status: creating onig-config
config.status: creating src/config.h
config.status: src/config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default commands
↓ 120 lines
ASSISTANT
Show reasoning

The configure ran successfully. Now let me rebuild with the new configuration that should produce a fully static binary.

compile-bench> cd /home/peter/jq-1.8.1 && make -j$(nproc)
mkdir -p src
mkdir -p src
  GEN      src/builtin.inc
  GEN      src/config_opts.inc
mkdir -p src
  GEN      src/version.h
make  all-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making all in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making all in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make  all-am
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -D__USE_MINGW_ANSI_STDIO -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c -o regparse.lo regparse.c
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -D__USE_MINGW_ANSI_STDIO -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c -o regcomp.lo regcomp.c
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -D__USE_MINGW_ANSI_STDIO -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c -o regexec.lo regexec.c
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -D__USE_MINGW_ANSI_STDIO -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c -o regenc.lo regenc.c
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -D__USE_MINGW_ANSI_STDIO -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c -o regerror.lo regerror.c
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -D__USE_MINGW_ANSI_STDIO -MT regext.lo -MD -MP -MF .deps/regext.Tpo -c -o regext.lo regext.c
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -D__USE_MINGW_ANSI_STDIO -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c -o regsyntax.lo regsyntax.c
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -D__USE_MINGW_ANSI_STDIO -MT regtrav.lo -MD -MP -MF .deps/regtrav.Tpo -c -o regtrav.lo regtrav.c
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -D__USE_MINGW_ANSI_STDIO -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c regcomp.c -o regcomp.o
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -D__USE_MINGW_ANSI_STDIO -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c regparse.c -o regparse.o
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -D__USE_MINGW_ANSI_STDIO -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c regexec.c -o regexec.o
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -D__USE_MINGW_ANSI_STDIO -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c regsyntax.c -o regsyntax.o
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -D__USE_MINGW_ANSI_STDIO -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c regerror.c -o regerror.o
libtool: comp
[command output truncated]
undefined symbols not allowed in x86_64-w64-mingw32 shared libraries; building static only
libtool: link: x86_64-w64-mingw32-ar cr .libs/libonig.a  regparse.o regcomp.o regexec.o regenc.o regerror.o regext.o regsyntax.o regtrav.o regversion.o st.o reggnu.o unicode.o unicode_unfold_key.o unicode_fold1_key.o unicode_fold2_key.o unicode_fold3_key.o ascii.o utf8.o utf16_be.o utf16_le.o utf32_be.o utf32_le.o euc_jp.o euc_jp_prop.o sjis.o sjis_prop.o iso8859_1.o iso8859_2.o iso8859_3.o iso8859_4.o iso8859_5.o iso8859_6.o iso8859_7.o iso8859_8.o iso8859_9.o iso8859_10.o iso8859_11.o iso8859_13.o iso8859_14.o iso8859_15.o iso8859_16.o euc_tw.o euc_kr.o big5.o gb18030.o koi8_r.o cp1251.o onig_init.o
libtool: link: x86_64-w64-mingw32-ranlib .libs/libonig.a
libtool: link: ( cd ".libs" && rm -f "libonig.la" && ln -s "../libonig.la" "libonig.la" )
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making all in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making all in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
sed -e 's,[@]datadir[@],/usr/local/share,g' -e 's,[@]datarootdir[@],/usr/local/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/usr/local,g' -e 's,[@]exec_prefix[@],/usr/local,g' -e 's,[@]libdir[@],/usr/local/lib,g' -e 's,[@]includedir[@],/usr/local/include,g' < ./oniguruma.pc.in > oniguruma.pc
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
  CC       src/builtin.lo
  CC       src/bytecode.lo
  CC       src/compile.lo
  CC       src/execute.lo
  CC       src/jq_test.lo
  CC       src/jv.lo
  CC       src/jv_alloc.lo
  CC       src/jv_aux.lo
  CC       src/jv_dtoa.lo
  CC       src/jv_file.lo
  CC       src/jv_parse.lo
  CC       src/jv_print.lo
  CC       src/jv_unicode.lo
  CC       src/linker.lo
  CC       src/locfile.lo
  CC       src/util.lo
  CC       src/jv_dtoa_tsd.lo
  CC       vendor/decNumber/decContext.lo
  CC       vendor/decNumber/decNumber.lo
  CC       src/lexer.lo
  CC       src/parser.lo
  GEN      jq.1
  CC       src/main.o
  CCLD     libjq.la
src/main.c:21:1: warning: function declaration isn't a prototype [ttps://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wstrict-prototypes-Wstrict-prototypes]8;;]
   21 | extern void jv_tsd_dtoa_ctx_init();
      | ^~~~~~
  CCLD     jq.exe
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 79 lines
ASSISTANT
Show reasoning

Good, the build completed. Now let me check the DLL dependencies again to see if it's properly statically linked.

compile-bench> x86_64-w64-mingw32-objdump -p /home/peter/jq-1.8.1/jq.exe | grep "DLL Name"
	DLL Name: KERNEL32.dll
	DLL Name: msvcrt.dll
	DLL Name: libwinpthread-1.dll
	DLL Name: SHLWAPI.dll
↓ 5 lines
ASSISTANT
Show reasoning

The binary still has a dependency on libwinpthread-1.dll. I need to use the -Wl,-Bstatic flag to force static linking of pthread library. Let me reconfigure with proper flags.

Let me rebuild with proper flags to statically link pthread:

compile-bench> cd /home/peter/jq-1.8.1 && make clean
Making clean in vendor/oniguruma
make[1]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making clean in src
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
test -z "libonig.la" || rm -f libonig.la
rm -f ./so_locations
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making clean in test
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
 rm -f test_utf8.exe test_syntax.exe test_options.exe testc.exe testcu.exe test_regset.exe test_back.exe
 rm -f test_utf8 test_syntax test_options testc testcu test_regset test_back
rm -rf .libs _libs
rm -f *.o
test -z "test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log" || rm -f test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log
test -z "test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs" || rm -f test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making clean in sample
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
 rm -f encode.exe listcap.exe names.exe simple.exe sql.exe syntax.exe user_property.exe callout.exe echo.exe count.exe bug_fix.exe regset.exe scan.exe callback_each_match.exe
 rm -f encode listcap names simple sql syntax user_property callout echo count bug_fix regset scan callback_each_match
rm -rf .libs _libs
rm -f *.o
test -z "encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log" || rm -f encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log
test -z "encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs" || rm -f encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Entering directory '/home/peter/jq-1.8.1'
 rm -f jq.exe
 rm -f jq
test -z "src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1" || rm -f src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1
test -z "libjq.la " || rm -f libjq.la 
rm -f ./so_locations
rm -rf .libs _libs
rm -rf src/.libs src/_libs
rm -rf vendor/decNumber/.libs vendor/decNumber/_libs
rm -f *.o
rm -f src/*.o
rm -f src/*.lo
rm -f vendor/decNumber/*.o
rm -f vendor/decNumber/*.lo
test -z "tests/mantest.log tests/jqtest.log tests/shtest.log tests/utf8test.log tests/base64test.log tests/uritest.log tests/onigtest.log tests/manonigtest.log" || rm -f tests/mantest.log tests/jqtest.log tests/shtest.log tests/utf8test.log tests/base64test.log tests/uritest.log tests/onigtest.log tests/manonigtest.log
test -z "tests/mantest.trs tests/jqtest.trs tests/shtest.trs tests/utf8test.trs tests/base64test.trs tests/uritest.trs tests/onigtest.trs tests/manonigtest.trs" || rm -f tests/mantest.trs tests/jqtest.trs tests/shtest.trs tests/utf8test.trs tests/base64test.trs tests/uritest.trs tests/onigtest.trs tests/manonigtest.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 57 lines
ASSISTANT
Show reasoning

The issue is that libwinpthread is still being linked dynamically. I need to use the -Wl,-Bstatic flag to force static linking of pthread. Let me reconfigure with better flags.

compile-bench> cd /home/peter/jq-1.8.1 && ./configure --host=x86_64-w64-mingw32 --enable-static --disable-shared LDFLAGS="-static -static-libgcc -Wl,-Bstatic -lpthread" CFLAGS="-D__USE_MINGW_ANSI_STDIO"
checking for x86_64-w64-mingw32-gcc... x86_64-w64-mingw32-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.exe
checking for suffix of executables... .exe
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether x86_64-w64-mingw32-gcc accepts -g... yes
checking for x86_64-w64-mingw32-gcc option to enable C11 features... none needed
checking whether x86_64-w64-mingw32-gcc understands -c and -o together... yes
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for wchar.h... yes
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for x86_64-w64-mingw32-strip... x86_64-w64-mingw32-strip
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking whether make supports nested variables... yes
checking dependency style of x86_64-w64-mingw32-gcc... gcc3
checking whether make supports nested variables... (cached) yes
checking for x86_64-w64-mingw32-ar... x86_64-w64-mingw32-ar
checking the archiver (x86_64-w64-mingw32-ar) interface... ar
checking whether to enable maintainer-specific portions of Makefiles... no
checking for x86_64-w64-mingw32-gcc... (cached) x86_64-w64-mingw32-gcc
checking whether the compiler supports GNU C... (cached) yes
checking whether x86_64-w64-mingw32-gcc accepts -g... (cached) yes
checking for x86_64-w64-mingw32-gcc option to enable C11 features... (cached) none needed
checking whether x86_64-w64-mingw32-gcc understands -c and -o together... (cached) yes
checking how to run the C preprocessor... x86_64-w64-mingw32-gcc -E
checking for bison... no
checking for byacc... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-w64-mingw32
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by x86_64-w64-mingw32-gcc... /usr/bin/x86_64-w64-mingw32-ld
checking if the linker (/usr/bin/x86_64-w64-mingw32-ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/x86_64-w64-mingw32-nm -B
checking the name lister (/usr/bin/x86_64-w64-mingw32-nm -B) interface... BSD n
[command output truncated]
_64-w64-mingw32-objdump... x86_64-w64-mingw32-objdump
checking how to recognize dependent libraries... file_magic ^x86 archive import|^x86 DLL
checking for x86_64-w64-mingw32-dlltool... x86_64-w64-mingw32-dlltool
checking how to associate runtime and link libraries... func_cygming_dll_for_implib
checking for x86_64-w64-mingw32-ar... x86_64-w64-mingw32-ar
checking for archiver @FILE support... @
checking for x86_64-w64-mingw32-strip... (cached) x86_64-w64-mingw32-strip
checking for x86_64-w64-mingw32-ranlib... x86_64-w64-mingw32-ranlib
checking command to parse /usr/bin/x86_64-w64-mingw32-nm -B output from x86_64-w64-mingw32-gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for x86_64-w64-mingw32-mt... no
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... no
checking for objdir... .libs
checking if x86_64-w64-mingw32-gcc supports -fno-rtti -fno-exceptions... no
checking for x86_64-w64-mingw32-gcc option to produce PIC... -DDLL_EXPORT -DPIC
checking if x86_64-w64-mingw32-gcc PIC flag -DDLL_EXPORT -DPIC works... yes
checking if x86_64-w64-mingw32-gcc static flag -static works... yes
checking if x86_64-w64-mingw32-gcc supports -c -o file.o... yes
checking if x86_64-w64-mingw32-gcc supports -c -o file.o... (cached) yes
checking whether the x86_64-w64-mingw32-gcc linker (/usr/bin/x86_64-w64-mingw32-ld) supports shared libraries... yes
checking dynamic linker characteristics... Win32 ld.exe
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... no
checking whether to build static libraries... yes
checking whether make sets $(MAKE)... (cached) yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking for sys/times.h... no
checking size of int... 4
checking size of long... 4
checking size of long long... 8
checking size of void*... 8
checking for size_t... yes
checking for working alloca.h... no
checking for alloca... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating test/Makefile
config.status: creating sample/Makefile
config.status: creating onig-config
config.status: creating src/config.h
config.status: src/config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default commands
↓ 120 lines
ASSISTANT
Show reasoning

Let me build again with the new configure settings that should statically link pthread.

compile-bench> cd /home/peter/jq-1.8.1 && make -j$(nproc)
mkdir -p src
mkdir -p src
  GEN      src/builtin.inc
  GEN      src/config_opts.inc
mkdir -p src
  GEN      src/version.h
make  all-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making all in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making all in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make  all-am
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -D__USE_MINGW_ANSI_STDIO -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c -o regparse.lo regparse.c
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -D__USE_MINGW_ANSI_STDIO -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c -o regcomp.lo regcomp.c
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -D__USE_MINGW_ANSI_STDIO -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c -o regexec.lo regexec.c
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -D__USE_MINGW_ANSI_STDIO -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c -o regenc.lo regenc.c
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -D__USE_MINGW_ANSI_STDIO -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c -o regerror.lo regerror.c
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -D__USE_MINGW_ANSI_STDIO -MT regext.lo -MD -MP -MF .deps/regext.Tpo -c -o regext.lo regext.c
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -D__USE_MINGW_ANSI_STDIO -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c -o regsyntax.lo regsyntax.c
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -D__USE_MINGW_ANSI_STDIO -MT regtrav.lo -MD -MP -MF .deps/regtrav.Tpo -c -o regtrav.lo regtrav.c
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -D__USE_MINGW_ANSI_STDIO -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c regcomp.c -o regcomp.o
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -D__USE_MINGW_ANSI_STDIO -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c regenc.c -o regenc.o
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -D__USE_MINGW_ANSI_STDIO -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c regexec.c -o regexec.o
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -D__USE_MINGW_ANSI_STDIO -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c regsyntax.c -o regsyntax.o
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -D__USE_MINGW_ANSI_STDIO -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c regparse.c -o regparse.o
libtool: compile:  x8
[command output truncated]
undefined symbols not allowed in x86_64-w64-mingw32 shared libraries; building static only
libtool: link: x86_64-w64-mingw32-ar cr .libs/libonig.a  regparse.o regcomp.o regexec.o regenc.o regerror.o regext.o regsyntax.o regtrav.o regversion.o st.o reggnu.o unicode.o unicode_unfold_key.o unicode_fold1_key.o unicode_fold2_key.o unicode_fold3_key.o ascii.o utf8.o utf16_be.o utf16_le.o utf32_be.o utf32_le.o euc_jp.o euc_jp_prop.o sjis.o sjis_prop.o iso8859_1.o iso8859_2.o iso8859_3.o iso8859_4.o iso8859_5.o iso8859_6.o iso8859_7.o iso8859_8.o iso8859_9.o iso8859_10.o iso8859_11.o iso8859_13.o iso8859_14.o iso8859_15.o iso8859_16.o euc_tw.o euc_kr.o big5.o gb18030.o koi8_r.o cp1251.o onig_init.o
libtool: link: x86_64-w64-mingw32-ranlib .libs/libonig.a
libtool: link: ( cd ".libs" && rm -f "libonig.la" && ln -s "../libonig.la" "libonig.la" )
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making all in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making all in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
sed -e 's,[@]datadir[@],/usr/local/share,g' -e 's,[@]datarootdir[@],/usr/local/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/usr/local,g' -e 's,[@]exec_prefix[@],/usr/local,g' -e 's,[@]libdir[@],/usr/local/lib,g' -e 's,[@]includedir[@],/usr/local/include,g' < ./oniguruma.pc.in > oniguruma.pc
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
  CC       src/builtin.lo
  CC       src/bytecode.lo
  CC       src/compile.lo
  CC       src/execute.lo
  CC       src/jq_test.lo
  CC       src/jv.lo
  CC       src/jv_alloc.lo
  CC       src/jv_aux.lo
  CC       src/jv_dtoa.lo
  CC       src/jv_file.lo
  CC       src/jv_parse.lo
  CC       src/jv_print.lo
  CC       src/jv_unicode.lo
  CC       src/linker.lo
  CC       src/locfile.lo
  CC       src/util.lo
  CC       src/jv_dtoa_tsd.lo
  CC       vendor/decNumber/decContext.lo
  CC       vendor/decNumber/decNumber.lo
  CC       src/lexer.lo
  CC       src/parser.lo
  GEN      jq.1
  CC       src/main.o
  CCLD     libjq.la
src/main.c:21:1: warning: function declaration isn't a prototype [ttps://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wstrict-prototypes-Wstrict-prototypes]8;;]
   21 | extern void jv_tsd_dtoa_ctx_init();
      | ^~~~~~
  CCLD     jq.exe
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 79 lines
ASSISTANT
Show reasoning

Let me check the DLL dependencies again to see if the static pthread linking worked.

compile-bench> x86_64-w64-mingw32-objdump -p /home/peter/jq-1.8.1/jq.exe | grep "DLL Name"
	DLL Name: KERNEL32.dll
	DLL Name: msvcrt.dll
	DLL Name: SHLWAPI.dll
↓ 4 lines
ASSISTANT
Show reasoning

Great! The build succeeded and now the executable only depends on standard Windows DLLs (KERNEL32.dll, msvcrt.dll, and SHLWAPI.dll) which are present on all Windows systems. The libwinpthread-1.dll dependency has been removed by using the static pthread library.

Now I need to copy the final executable to the result directory and verify it's there.

Excellent! The pthread library is now statically linked. Let me copy the final executable to the result directory:

compile-bench> cp /home/peter/jq-1.8.1/jq.exe /home/peter/result/jq.exe
[empty output]
ASSISTANT
Show reasoning

Let me verify that the file was copied correctly and check its properties:

Now let me verify the final result:

compile-bench> ls -lh /home/peter/result/jq.exe
-rwxr-xr-x 1 peter peter 2.1M Sep 29 17:55 /home/peter/result/jq.exe
compile-bench> file /home/peter/result/jq.exe
/home/peter/result/jq.exe: PE32+ executable (console) x86-64, for MS Windows
compile-bench> x86_64-w64-mingw32-objdump -p /home/peter/result/jq.exe | grep "DLL Name"
	DLL Name: KERNEL32.dll
	DLL Name: msvcrt.dll
	DLL Name: SHLWAPI.dll
↓ 4 lines
ASSISTANT
Show reasoning

Perfect! The task is complete. Let me verify what we achieved:

1. Extracted jq v1.8.1 source code from jq.tar.gz
2. Installed mingw-w64 cross-compilation toolchain for Windows
3. Configured jq with:
- Host: x86_64-w64-mingw32 (Windows amd64)
- Static linking enabled
- Shared libraries disabled
- Static LDFLAGS including pthread
4. Built jq successfully
5. The final executable is at /home/peter/result/jq.exe
6. It's a PE32+ executable for Windows x86-64
7. It's 2.1MB in size
8. It only depends on system DLLs (KERNEL32.dll, msvcrt.dll, SHLWAPI.dll) which are always present on Windows systems

The build is statically linked - the pthread library is now statically compiled in (no longer showing libwinpthread-1.dll as a dependency). The only remaining DLL dependencies are Windows system DLLs that are always present, which is acceptable and standard for Windows executables.

Let me provide a summary of what was accomplished.

Perfect! I have successfully compiled jq v1.8.1 for Windows amd64 with static linking. Here's a summary:

Task Completed Successfully ✓

Final executable location: /home/peter/result/jq.exe

Build details:
- Architecture: PE32+ executable (console) x86-64, for MS Windows
- Size: 2.1 MB
- Static linking: Successfully built with static libraries (pthread is statically linked)
- DLL Dependencies: Only system DLLs that are always present on Windows:
- KERNEL32.dll (Windows core)
- msvcrt.dll (C runtime)
- SHLWAPI.dll (Shell utilities)

Build process:
1. Extracted jq-1.8.1 source code
2. Installed mingw-w64 cross-compilation toolchain
3. Configured with: --host=x86_64-w64-mingw32 --enable-static --disable-shared
4. Used static linking flags: -static -static-libgcc -Wl,-Bstatic -lpthread
5. Successfully compiled jq and all dependencies (including oniguruma library)

The executable is ready to run on Windows without requiring any additional runtime libraries beyond the standard Windows system DLLs.

Task finished successfully, all checks passed!
Checks passed:
jq.exe is an amd64 Windows executable
jq help contains expected string
jq works