CompileBench Attempt: jq-static-musl, gpt-5-mini-high, irquyvwht52o6

<- Ranking

Summary

Task

jq-static-musl

Performance

Cost	$0.032
Total elapsed time	4m11s
LLM inference time	3m43s
Command execution time	27s
Commands executed	20

All details >

Attempt ID	`irquyvwht52o6`	Attempt group	run-16-09-22-05
Revision	`fb5c74bd2fee`	AWS Instance	m8i.2xlarge
Start time	2025-09-16T21:28:08.642Z	End time	2025-09-16T21:32:20.162Z
Task	jq-static-musl	Environment	ubuntu-22.04-amd64
Model	gpt-5-mini-high	OpenRouter slug	`openai/gpt-5-mini`
Temperature	1	Explicit prompt caching	false
User msg after tool call	false	Max tool calls	100
Total timeout seconds	1200	Single command timeout	600
Cost	$0.032	Duration	4m11s
LLM inference time	3m43s	Command execution time	27s
Final context tokens	25,587	Total output tokens	9,471
Output reasoning tokens	7,680	Messages	43
Assistant messages	21	User messages	1
System messages	1	Commands executed	20

Download full attempt result JSON

Task

Task: jq-static-musl

jq 1.8.1 is a command-line JSON utility for viewing and transforming JSON.
Project link: github.com/jqlang/jq

Task:
Compile and install statically-linked jq to a specific location. The binary must use musl C library (not the standard glibc).

Difficulties:
musl toolchain setup, avoiding glibc-only assumptions.

Environment:
Ubuntu 22.04 on amd64, with internet access.

View task page

Execution log

SYSTEM

You are a package-building specialist operating a Ubuntu 22.04 bash shell via one tool: run_terminal_cmd.
The current working directory of every run_terminal_cmd is /home/peter.
Execution rules:
- Always pass non-interactive flags for any command that could prompt (e.g., -y, --yes, DEBIAN_FRONTEND=noninteractive).
- Don't include any newlines in the command.
- You can use sudo.
If you encounter any errors or issues while doing the user's request, you must fix them and continue the task.
At the end verify you did the user request correctly.

USER

You are given jq v1.8.1 source code at /home/peter/jq.tar.gz. Please compile the jq package using musl as the C standard library and install it to /home/peter/result. Create a symlink from /home/peter/result/jq to the compiled jq binary. The binary must be statically linked and must use musl (not glibc).

ASSISTANT

Show reasoning

Evaluating jq compilation

I'm digging into how to compile jq, which historically relies on the oniguruma library. It seems that building it requires certain tools like autoconf, make, and potentially libtool. To ensure static linking, I could specify CC=musl-gcc and LDFLAGS=-static or use a musl cross-compiling toolchain. But then, I'd likely need to build dependencies, like oniguruma. It sounds like jq might also include its own version of oniguruma. Next, I'll check the jq v1.8.1 source and plan the build steps carefully.Planning jq build steps

I'm looking at how to run commands using functions.run_terminal_cmd. Even though multi_tool_use.parallel is available, I can only use commands from the functions namespace, so I’ll run commands sequentially. First, I'll inspect the tarball by listing its contents while making sure to use non-interactive flags for apt-get installations. I'll need to remember to keep each command on a single line and handle any errors that pop up.

I'll install the necessary build dependencies like autoconf and musl-tools, which should give me musl-gcc in the right directory.Addressing jq build procedure

I need to be cautious about linking errors from glibc's standard library if libraries aren’t available. By default, jq may compile into a dynamic binary, so I’ll set CFLAGS and LDFLAGS to include flags for static builds, using musl-gcc. I should inspect the source after extracting the tarball.

I’ll create a directory at /home/peter/result to store the built binary and create a symlink from there. It might be better to put the compiled binary in a specific versioned folder like /home/peter/result/jq--musl, then symlink /home/peter/result/jq to that.Simplifying binary placement

To simplify things, I’m thinking of placing the compiled binary in /home/peter/result/bin/jq and creating a symlink from /home/peter/result/jq to that same binary. This way, the symlink will clearly point to the right path, which seems to be what the instructions require. It's crucial that the binary is statically linked and uses musl instead of glibc.

I plan to verify the linking using the 'file' command, checking for "statically linked" and using 'ldd' to confirm that it’s not dynamic, even if ldd might not work flawlessly in this case.Inspecting the jq binary

To verify that the binary uses musl, I can run "readelf -a | grep 'interpreter'". If it’s a static build with musl, there should be no interpreter present, and for static binaries, there will be '.note.ABI-tag' but possibly no "NEEDED" entries. I'll check using 'file' and 'readelf' commands.

To confirm the binary embeds musl code, I might also use 'strings | grep musl' as this should identify the musl version header string. It's essential to ensure that I'm using CC=musl-gcc for static builds. Let's start by running terminal commands to inspect the tarball and gather relevant information.

compile-bench> ls -l /home/peter/jq.tar.gz && tar -tf /home/peter/jq.tar.gz | sed -n '1,40p'

-rw-r--r-- 1 peter peter 2026798 Sep 16 21:28 /home/peter/jq.tar.gz
jq-1.8.1/
jq-1.8.1/jq.1
jq-1.8.1/configure
jq-1.8.1/config/
jq-1.8.1/config/test-driver
jq-1.8.1/config/config.sub
jq-1.8.1/config/ar-lib
jq-1.8.1/config/missing
jq-1.8.1/config/compile
jq-1.8.1/config/ltmain.sh
jq-1.8.1/config/m4/
jq-1.8.1/config/m4/find-func-no-libs2.m4
jq-1.8.1/config/m4/libtool.m4
jq-1.8.1/config/m4/find-func.m4
jq-1.8.1/config/m4/ltoptions.m4
jq-1.8.1/config/m4/ltsugar.m4
jq-1.8.1/config/m4/find-func-no-libs.m4
jq-1.8.1/config/m4/lt~obsolete.m4
jq-1.8.1/config/m4/ltversion.m4
jq-1.8.1/config/m4/misc.m4
jq-1.8.1/config/m4/check-math-func.m4
jq-1.8.1/config/depcomp
jq-1.8.1/config/config.guess
jq-1.8.1/config/install-sh
jq-1.8.1/config/ylwrap
jq-1.8.1/libjq.pc.in
jq-1.8.1/libjq.pc
jq-1.8.1/README.md
jq-1.8.1/jq.spec
jq-1.8.1/AUTHORS
jq-1.8.1/COPYING
jq-1.8.1/src/
jq-1.8.1/src/main.c
jq-1.8.1/src/jv_unicode.h
jq-1.8.1/src/jv.h
jq-1.8.1/src/builtin.jq
jq-1.8.1/src/jv_alloc.h
jq-1.8.1/src/parser.c
jq-1.8.1/src/execute.c
jq-1.8.1/src/parser.h

↓ 42 lines

ASSISTANT

Show reasoning

Inspecting tarball contents

I'm looking at the tarball, which has the configure script and typical autotools sources. I noticed there isn't an explicit oniguruma directory, so I wonder if jq includes an internal regex engine. Now, I'm considering inspecting the src directory list more closely. I should list more files to get a clearer picture of what’s included and see if I can figure out more about its contents.

compile-bench> tar -tf /home/peter/jq.tar.gz | sed -n '41,200p'

jq-1.8.1/src/jv_dtoa.c
jq-1.8.1/src/jv_print.c
jq-1.8.1/src/jv_dtoa_tsd.h
jq-1.8.1/src/builtin.h
jq-1.8.1/src/jv_thread.h
jq-1.8.1/src/lexer.h
jq-1.8.1/src/jv_dtoa_tsd.c
jq-1.8.1/src/jv_parse.c
jq-1.8.1/src/lexer.c
jq-1.8.1/src/opcode_list.h
jq-1.8.1/src/locfile.c
jq-1.8.1/src/linker.c
jq-1.8.1/src/lexer.l
jq-1.8.1/src/jv_dtoa.h
jq-1.8.1/src/jv_private.h
jq-1.8.1/src/linker.h
jq-1.8.1/src/exec_stack.h
jq-1.8.1/src/builtin.c
jq-1.8.1/src/version.h
jq-1.8.1/src/locfile.h
jq-1.8.1/src/compile.h
jq-1.8.1/src/jv_unicode.c
jq-1.8.1/src/compile.c
jq-1.8.1/src/util.c
jq-1.8.1/src/jq_test.c
jq-1.8.1/src/jv.c
jq-1.8.1/src/jq.h
jq-1.8.1/src/bytecode.c
jq-1.8.1/src/jv_aux.c
jq-1.8.1/src/inject_errors.c
jq-1.8.1/src/libm.h
jq-1.8.1/src/jv_utf8_tables.h
jq-1.8.1/src/util.h
jq-1.8.1/src/jv_file.c
jq-1.8.1/src/parser.y
jq-1.8.1/src/bytecode.h
jq-1.8.1/src/jv_alloc.c
jq-1.8.1/src/jq_parser.h
jq-1.8.1/tests/
jq-1.8.1/tests/no-main-program.jq
jq-1.8.1/tests/manonigtest
jq-1.8.1/tests/uri.test
jq-1.8.1/tests/uritest
jq-1.8.1/tests/base64test
jq-1.8.1/tests/local.supp
jq-1.8.1/tests/onig.supp
jq-1.8.1/tests/jq.test
jq-1.8.1/tests/modules/
jq-1.8.1/tests/modules/b/
jq-1.8.1/tests/modules/b/b.jq
jq-1.8.1/tests/modules/home1/
jq-1.8.1/tests/modules/home1/.jq
jq-1.8.1/tests/modules/syntaxerror/
jq-1.8.1/tests/modules/syntaxerror/syntaxerror.jq
jq-1.8.1/tests/modules/home2/
jq-1.8.1/tests/modules/home2/.jq/
jq-1.8.1/tests/modules/home2/.jq/g.jq
jq-1.8.1/tests/modules/a.jq
jq-1.8.1/tests/modules/test_bind_order1.jq
jq-1.8.1/tests/modules/test_bind_order2.jq
jq-1.8.1/tests/modules/shadow1.jq
jq-1.8.1/tests/modules/lib/
jq-1.8.1/tests/modules/lib/jq/
jq-1.8.1/tests/modules/lib/jq/e/
jq-1.8.1/tests/modules/lib/jq/e/e.jq
jq-1.8.1/tests/modules/lib/jq/f.jq
jq-1.8.1/tests/modules/test_bind_order0.jq
jq-1.8.1/tests/modules/data.json
jq-1.8.1/tests/modules/shadow2.jq
jq-1.8.1/tests/modules/c/
[command output truncated]
jq-1.8.1/vendor/oniguruma/
jq-1.8.1/vendor/oniguruma/configure
jq-1.8.1/vendor/oniguruma/make_win.bat
jq-1.8.1/vendor/oniguruma/test-driver
jq-1.8.1/vendor/oniguruma/README.md
jq-1.8.1/vendor/oniguruma/AUTHORS
jq-1.8.1/vendor/oniguruma/doc/
jq-1.8.1/vendor/oniguruma/doc/API
jq-1.8.1/vendor/oniguruma/doc/FAQ.ja
jq-1.8.1/vendor/oniguruma/doc/CALLOUTS.API.ja
jq-1.8.1/vendor/oniguruma/doc/SYNTAX.md
jq-1.8.1/vendor/oniguruma/doc/CALLOUTS.BUILTIN
jq-1.8.1/vendor/oniguruma/doc/onig_syn_md.c
jq-1.8.1/vendor/oniguruma/doc/RE.ja
jq-1.8.1/vendor/oniguruma/doc/UNICODE_PROPERTIES
jq-1.8.1/vendor/oniguruma/doc/API.ja
jq-1.8.1/vendor/oniguruma/doc/CALLOUTS.BUILTIN.ja
jq-1.8.1/vendor/oniguruma/doc/RE
jq-1.8.1/vendor/oniguruma/doc/FAQ
jq-1.8.1/vendor/oniguruma/doc/CALLOUTS.API
jq-1.8.1/vendor/oniguruma/config.sub
jq-1.8.1/vendor/oniguruma/oniguruma.pc.cmake.in
jq-1.8.1/vendor/oniguruma/COPYING
jq-1.8.1/vendor/oniguruma/src/
jq-1.8.1/vendor/oniguruma/src/iso8859_3.c
jq-1.8.1/vendor/oniguruma/src/onig_init.c
jq-1.8.1/vendor/oniguruma/src/utf8.c
jq-1.8.1/vendor/oniguruma/src/iso8859_5.c
jq-1.8.1/vendor/oniguruma/src/config.h.win32
jq-1.8.1/vendor/oniguruma/src/reggnu.c
jq-1.8.1/vendor/oniguruma/src/regint.h
jq-1.8.1/vendor/oniguruma/src/regerror.c
jq-1.8.1/vendor/oniguruma/src/config.h.in
jq-1.8.1/vendor/oniguruma/src/iso8859_4.c
jq-1.8.1/vendor/oniguruma/src/regparse.c
jq-1.8.1/vendor/oniguruma/src/big5.c
jq-1.8.1/vendor/oniguruma/src/regposerr.c
jq-1.8.1/vendor/oniguruma/src/mktable.c
jq-1.8.1/vendor/oniguruma/src/euc_kr.c
jq-1.8.1/vendor/oniguruma/src/iso8859_6.c
jq-1.8.1/vendor/oniguruma/src/iso8859_14.c
jq-1.8.1/vendor/oniguruma/src/iso8859_7.c
jq-1.8.1/vendor/oniguruma/src/iso8859_13.c
jq-1.8.1/vendor/oniguruma/src/iso8859_10.c
jq-1.8.1/vendor/oniguruma/src/iso8859_2.c
jq-1.8.1/vendor/oniguruma/src/regexec.c
jq-1.8.1/vendor/oniguruma/src/iso8859_16.c
jq-1.8.1/vendor/oniguruma/src/euc_tw.c
jq-1.8.1/vendor/oniguruma/src/regparse.h
jq-1.8.1/vendor/oniguruma/src/unicode.c
jq-1.8.1/vendor/oniguruma/src/ascii.c
jq-1.8.1/vendor/oniguruma/src/koi8.c
jq-1.8.1/vendor/oniguruma/src/iso8859_11.c
jq-1.8.1/vendor/oniguruma/src/regext.c
jq-1.8.1/vendor/oniguruma/src/iso8859_1.c
jq-1.8.1/vendor/oniguruma/src/iso8859_15.c
jq-1.8.1/vendor/oniguruma/src/onigposix.h
jq-1.8.1/vendor/oniguruma/src/st.h
jq-1.8.1/vendor/oniguruma/src/utf32_le.c
jq-1.8.1/vendor/oniguruma/src/regversion.c
jq-1.8.1/vendor/oniguruma/src/unicode_egcb_data.c
jq-1.8.1/vendor/oniguruma/src/iso8859_8.c
jq-1.8.1/vendor/oniguruma/src/oniggnu.h
jq-1.8.1/vendor/oniguruma/src/unicode_fold_data.c
jq-1.8.1/vendor/oniguruma/src/unicode_property_data.c
jq-1.8.1/vendor/oniguruma/src/unicode_property_data_posix.c
jq-1.8.1/vendor/oniguruma/src/unicode_fold3_key.c
jq-1.8.1/vendor/oniguruma/src/st.c
jq-1.8.1/vendor/oniguruma/src/iso8859_9.c

↓ 141 lines

ASSISTANT

Show reasoning

Building oniguruma

Great! I see that oniguruma is present, which means jq can compile with it internally. I should use musl-gcc to create a static library and ensure I compile a static musl linked binary. I need to set CFLAGS and LDFLAGS, possibly using -static -s, after confirming that musl-gcc is installed. I also need to install necessary development tools, including build-essential, autoconf, and others. If parser.y and lexer.l are involved, I might need flex and bison, but autoreconf might not be necessary since the tarball already includes configure.Planning build steps

It looks like the lex.l file is present, and the lexer.c file in the src directory suggests it's pre-generated. So, I think the configure step will be sufficient. I plan to install essential packages like build-essential, musl-tools, autoconf, and a few others. I'll ensure musl-gcc is used for C++ compilation, though jq is C, so that should be fine. I need to consider pthread compatibility, making sure static linking doesn’t inadvertently require shared libraries. Let’s outline the build steps: install packages, extract the tarball, create a build directory, and set environment variables before running ./configure.Ensuring static linking

I need to ensure that the prefix for installation points to /home/peter/result, which will help when I copy the final binary to /home/peter/result/bin/jq. So, I’ll run ./configure with --prefix set accordingly, and I’ll pass CC=musl-gcc along with CFLAGS and LDFLAGS to keep everything static. After that, I’ll use make with parallel jobs and proceed to make install. I have to be mindful that libtool might try to create shared libraries for oniguruma, so I’ll include --enable-static and --disable-shared in the configure command to enforce static linking.Compiling oniguruma

For the oniguruma vendor, there might be a configure option that defaults to building both shared and static libraries. However, jq's configure may link with libonig.a if it’s available. To ensure we only build static libraries and avoid linking against glibc, I’ll set --disable-shared and --enable-static globally. It could be simpler to use LDFLAGS="-static -Wl,-Bstatic" and potentially LIBS to include necessary libraries. I could also compile jq as a static binary by linking all objects with -static. First, I need to make sure all dependencies are installed before proceeding!Installing dependencies

I need to run a command to update my package list and install several essential development tools. The command will be: sudo apt-get update -y && sudo apt-get install -y build-essential automake autoconf libtool pkg-config m4 gettext flex bison ca-certificates git wget curl musl-tools.

I remember to include DEBIAN_FRONTEND=noninteractive to avoid any interaction prompts during the installation. So, I’ll adjust the command to use sudo DEBIAN_FRONTEND=noninteractive apt-get update -y && install -y .... Time to proceed with the installation!

compile-bench> sudo DEBIAN_FRONTEND=noninteractive apt-get update -y && sudo DEBIAN_FRONTEND=noninteractive apt-get install -y build-essential autoconf automake libtool pkg-config m4 gettext flex bison ca-certificates git wget curl musl-tools

0% [Working]
            
Hit:1 http://archive.ubuntu.com/ubuntu jammy InRelease

0% [Waiting for headers] [Waiting for headers]
                                              
Get:2 http://archive.ubuntu.com/ubuntu jammy-updates InRelease [128 kB]

0% [2 InRelease 12.7 kB/128 kB 10%] [Waiting for headers]
                                                         
Get:3 http://security.ubuntu.com/ubuntu jammy-security InRelease [129 kB]

0% [2 InRelease 30.1 kB/128 kB 24%] [3 InRelease 4096 B/129 kB 3%]
0% [2 InRelease 47.5 kB/128 kB 37%] [3 InRelease 14.2 kB/129 kB 11%]
                                                                    
0% [Waiting for headers] [3 InRelease 14.2 kB/129 kB 11%]
                                                         
Get:4 http://archive.ubuntu.com/ubuntu jammy-backports InRelease [127 kB]

0% [4 InRelease 6932 B/127 kB 5%] [3 InRelease 14.2 kB/129 kB 11%]
                                                                  
0% [3 InRelease 14.2 kB/129 kB 11%]
0% [3 InRelease 14.2 kB/129 kB 11%]
                                   
Get:5 http://archive.ubuntu.com/ubuntu jammy-updates/universe amd64 Packages [1581 kB]

0% [5 Packages 6999 B/1581 kB 0%] [3 InRelease 22.9 kB/129 kB 18%]
0% [5 Packages 243 kB/1581 kB 15%] [3 InRelease 31.5 kB/129 kB 24%]
                                                                   
0% [3 InRelease 51.8 kB/129 kB 40%]
0% [5 Packages store 0 B] [3 InRelease 51.8 kB/129 kB 40%]
                                                          
Get:6 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 Packages [3626 kB]

0% [5 Packages store 0 B] [6 Packages 15.7 kB/3626 kB 0%] [3 InRelease 63.4 kB/
                                                                               
0% [6 Packages 2315 kB/3626 kB 64%] [3 InRelease 75.0 kB/129 kB 58%]
                                                                    
0% [3 InRelease 83.7 kB/129 kB 65%]
0% [6 Packages store 0 B] [3 InRelease 83.7 kB/129 kB 65%]
                                                          
0% [6 Packages store 0 B]
46% [6 Packages store 0 B]
                          
46% [Waiting for headers]
                         
Get:7 http://security.ubuntu.com/ubuntu jammy-security/main amd64 Packages [3311 kB]

46% [7 Packages 2655 B/3311 kB 0%]
                                  
63% [Working]
63% [7 Packages store 0 B] [Waiting for headers]
                                                
Get:8 http://security.ubuntu.com/ubuntu jammy-security/restricted amd64 Packages [5441 kB]

63% [7 Packages store 0 B] [8 Packages 24.4 kB/5441 kB 0%]
                                                          
65% [8 Packages 330 kB/5441 kB 6%]
90% [8 Packages 5188 kB/5441 kB 95%]
                                    
91% [Waiting for headers]
                         
Get:9 http://security.ubuntu.com/ubuntu jammy-security/multiverse amd64 Packages [80.3 kB]

92% [9 Packages 69.9 kB/80.3 kB 87%]
                               
[command output truncated]
 (2:1.7.5-1ubuntu0.3) ...
Setting up libsigsegv2:amd64 (2.13-1ubuntu3) ...
Setting up pkg-config (0.29.2-1ubuntu3) ...
Setting up libfl2:amd64 (2.6.4-8build2) ...
Setting up libltdl7:amd64 (2.4.6-15build2) ...
Setting up libmd0:amd64 (1.0.4-1build1) ...
Setting up musl:amd64 (1.2.2-4) ...
Setting up git-man (1:2.34.1-1ubuntu1.15) ...
Setting up libfido2-1:amd64 (1.10.0-1) ...
Setting up libbsd0:amd64 (0.11.5-1) ...
Setting up libicu70:amd64 (70.1-2) ...
Setting up libxdmcp6:amd64 (1:1.1.3-0ubuntu5) ...
Setting up libxcb1:amd64 (1.14-3ubuntu3) ...
Setting up libtool (2.4.6-15build2) ...
Setting up libedit2:amd64 (3.1-20210910-1build1) ...
Setting up m4 (1.4.18-5ubuntu2) ...
Setting up musl-dev:amd64 (1.2.2-4) ...
Setting up git (1:2.34.1-1ubuntu1.15) ...
Setting up autoconf (2.71-2) ...
Setting up bison (2:3.8.2+dfsg-1build1) ...
update-alternatives: using /usr/bin/bison.yacc to provide /usr/bin/yacc (yacc) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/yacc.1.gz because associated file /usr/share/man/man1/bison.yacc.1.gz (of link group yacc) doesn't exist
Setting up libx11-6:amd64 (2:1.7.5-1ubuntu0.3) ...
Setting up libxml2:amd64 (2.9.13+dfsg-1ubuntu0.9) ...
Setting up libxmuu1:amd64 (2:1.1.3-3) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/automake.1.gz because associated file /usr/share/man/man1/automake-1.16.1.gz (of link group automake) doesn't exist
update-alternatives: warning: skip creation of /usr/share/man/man1/aclocal.1.gz because associated file /usr/share/man/man1/aclocal-1.16.1.gz (of link group automake) doesn't exist
Setting up flex (2.6.4-8build2) ...
Setting up gettext (0.21-4ubuntu4) ...
Setting up openssh-client (1:8.9p1-3ubuntu0.13) ...
update-alternatives: using /usr/bin/ssh to provide /usr/bin/rsh (rsh) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/rsh.1.gz because associated file /usr/share/man/man1/ssh.1.gz (of link group rsh) doesn't exist
update-alternatives: using /usr/bin/slogin to provide /usr/bin/rlogin (rlogin) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/rlogin.1.gz because associated file /usr/share/man/man1/slogin.1.gz (of link group rlogin) doesn't exist
update-alternatives: using /usr/bin/scp to provide /usr/bin/rcp (rcp) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/rcp.1.gz because associated file /usr/share/man/man1/scp.1.gz (of link group rcp) doesn't exist
Setting up libxext6:amd64 (2:1.3.4-1build1) ...
Setting up libfl-dev:amd64 (2.6.4-8build2) ...
Setting up libltdl-dev:amd64 (2.4.6-15build2) ...
Setting up musl-tools (1.2.2-4) ...
Setting up shared-mime-info (2.1-2) ...
Setting up xauth (1:1.1-1build2) ...
Processing triggers for libc-bin (2.35-0ubuntu3.10) ...

↓ 57 lines

ASSISTANT

Show reasoning

Ensuring compiler setup

I need to check that musl-gcc is located at /usr/bin/musl-gcc. When I configure, it will probably check for cc, but I can use CC=musl-gcc to override the default. Making sure I have the right setup is essential for smooth compilation! It’s good to double-check all paths and configurations so nothing gets overlooked. I want everything to work seamlessly, so I’ll keep these details in mind as I proceed.

compile-bench> cd /home/peter && rm -rf jq-1.8.1 && tar xzf jq.tar.gz && cd jq-1.8.1 && ./configure --prefix=/home/peter/result CC=musl-gcc CFLAGS='-O2 -pipe -static -s' LDFLAGS='-static'

checking for gcc... musl-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether musl-gcc accepts -g... yes
checking for musl-gcc option to enable C11 features... none needed
checking whether musl-gcc understands -c and -o together... yes
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for wchar.h... yes
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking whether make supports nested variables... yes
checking dependency style of musl-gcc... gcc3
checking whether make supports nested variables... (cached) yes
checking for ar... ar
checking the archiver (ar) interface... ar
checking whether to enable maintainer-specific portions of Makefiles... no
checking for gcc... (cached) musl-gcc
checking whether the compiler supports GNU C... (cached) yes
checking whether musl-gcc accepts -g... (cached) yes
checking for musl-gcc option to enable C11 features... (cached) none needed
checking whether musl-gcc understands -c and -o together... (cached) yes
checking how to run the C preprocessor... musl-gcc -E
checking for bison... bison -y
checking build system type... x86_64-pc-linux-musl
checking host system type... x86_64-pc-linux-musl
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by musl-gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-musl file names to x86_64-pc-linux-musl format... func_convert_file_noop
checking how to convert x86_64-pc-linux-musl file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
ch
[command output truncated]
cking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from musl-gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if musl-gcc supports -fno-rtti -fno-exceptions... no
checking for musl-gcc option to produce PIC... -fPIC -DPIC
checking if musl-gcc PIC flag -fPIC -DPIC works... yes
checking if musl-gcc static flag -static works... yes
checking if musl-gcc supports -c -o file.o... yes
checking if musl-gcc supports -c -o file.o... (cached) yes
checking whether the musl-gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking whether make sets $(MAKE)... (cached) yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking for sys/times.h... yes
checking size of int... 4
checking size of long... 8
checking size of long long... 8
checking size of void*... 8
checking for size_t... yes
checking for working alloca.h... yes
checking for alloca... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating test/Makefile
config.status: creating sample/Makefile
config.status: creating onig-config
config.status: creating src/config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default commands

↓ 130 lines

ASSISTANT

Show reasoning

Executing build commands

I've completed the configuration, so my next step is running 'make -j$(nproc)'. This command should help me compile things quickly by utilizing multiple cores. It’s always better to maximize efficiency during the build process, right? I just have to remember to pay attention to any errors that might pop up during compilation. Hopefully, everything goes smoothly, and there won't be too much to troubleshoot afterwards! Let's get this done!

compile-bench> cd /home/peter/jq-1.8.1 && make -j$(nproc)

mkdir -p src
mkdir -p src
  GEN      src/builtin.inc
  GEN      src/config_opts.inc
mkdir -p src
  GEN      src/version.h
make  all-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making all in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making all in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make  all-am
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -pipe -static -s -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c -o regparse.lo regparse.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -pipe -static -s -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c -o regcomp.lo regcomp.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -pipe -static -s -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c -o regexec.lo regexec.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -pipe -static -s -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c -o regenc.lo regenc.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -pipe -static -s -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c -o regerror.lo regerror.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -pipe -static -s -MT regext.lo -MD -MP -MF .deps/regext.Tpo -c -o regext.lo regext.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -pipe -static -s -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c -o regsyntax.lo regsyntax.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -pipe -static -s -MT regtrav.lo -MD -MP -MF .deps/regtrav.Tpo -c -o regtrav.lo regtrav.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -O2 -pipe -s -MT regtrav.lo -MD -MP -MF .deps/regtrav.Tpo -c regtrav.c -o regtrav.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -O2 -pipe -s -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c regerror.c -o regerror.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -O2 -pipe -s -MT regext.lo -MD -MP -MF .deps/regext.Tpo -c regext.c -o regext.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -O2 -pipe -s -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c regparse.c -o regparse.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -O2 -pipe -s -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c regexec.c -o regexec.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -O2 -pipe -s -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c regcomp.c -o regcomp.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -O2 -pipe -s -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c regenc.c -o regenc.o
libtool: compil
[command output truncated]
 sjis.lo sjis_prop.lo iso8859_1.lo iso8859_2.lo iso8859_3.lo iso8859_4.lo iso8859_5.lo iso8859_6.lo iso8859_7.lo iso8859_8.lo iso8859_9.lo iso8859_10.lo iso8859_11.lo iso8859_13.lo iso8859_14.lo iso8859_15.lo iso8859_16.lo euc_tw.lo euc_kr.lo big5.lo gb18030.lo koi8_r.lo cp1251.lo onig_init.lo  
libtool: link: ar cr .libs/libonig.a  regparse.o regcomp.o regexec.o regenc.o regerror.o regext.o regsyntax.o regtrav.o regversion.o st.o reggnu.o unicode.o unicode_unfold_key.o unicode_fold1_key.o unicode_fold2_key.o unicode_fold3_key.o ascii.o utf8.o utf16_be.o utf16_le.o utf32_be.o utf32_le.o euc_jp.o euc_jp_prop.o sjis.o sjis_prop.o iso8859_1.o iso8859_2.o iso8859_3.o iso8859_4.o iso8859_5.o iso8859_6.o iso8859_7.o iso8859_8.o iso8859_9.o iso8859_10.o iso8859_11.o iso8859_13.o iso8859_14.o iso8859_15.o iso8859_16.o euc_tw.o euc_kr.o big5.o gb18030.o koi8_r.o cp1251.o onig_init.o
libtool: link: ranlib .libs/libonig.a
libtool: link: ( cd ".libs" && rm -f "libonig.la" && ln -s "../libonig.la" "libonig.la" )
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making all in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making all in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
sed -e 's,[@]datadir[@],/home/peter/result/share,g' -e 's,[@]datarootdir[@],/home/peter/result/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/home/peter/result,g' -e 's,[@]exec_prefix[@],/home/peter/result,g' -e 's,[@]libdir[@],/home/peter/result/lib,g' -e 's,[@]includedir[@],/home/peter/result/include,g' < ./oniguruma.pc.in > oniguruma.pc
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
  CC       src/builtin.lo
  CC       src/bytecode.lo
  CC       src/compile.lo
  CC       src/execute.lo
  CC       src/jq_test.lo
  CC       src/jv.lo
  CC       src/jv_aux.lo
  CC       src/jv_alloc.lo
  CC       src/jv_dtoa.lo
  CC       src/jv_file.lo
  CC       src/jv_parse.lo
  CC       src/jv_print.lo
  CC       src/jv_unicode.lo
  CC       src/linker.lo
  CC       src/locfile.lo
  CC       src/util.lo
  CC       src/jv_dtoa_tsd.lo
  CC       vendor/decNumber/decContext.lo
  CC       vendor/decNumber/decNumber.lo
  CC       src/lexer.lo
  CC       src/parser.lo
mkdir -p src
  GEN      src/version.h
  CC       src/main.o
  CCLD     libjq.la
  CCLD     jq
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'

↓ 79 lines

ASSISTANT

compile-bench> cd /home/peter/jq-1.8.1 && make install

mkdir -p src
  GEN      src/version.h
make  install-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making install in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making install in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
 /usr/bin/mkdir -p '/home/peter/result/lib'
 /bin/bash ../libtool   --mode=install /usr/bin/install -c   libonig.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libonig.lai /home/peter/result/lib/libonig.la
libtool: install: /usr/bin/install -c .libs/libonig.a /home/peter/result/lib/libonig.a
libtool: install: chmod 644 /home/peter/result/lib/libonig.a
libtool: install: ranlib /home/peter/result/lib/libonig.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /home/peter/result/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
 /usr/bin/mkdir -p '/home/peter/result/include'
 /usr/bin/install -c -m 644 oniguruma.h oniggnu.h '/home/peter/result/include'
make  install-data-hook
make[5]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[5]: Nothing to be done for 'install-data-hook'.
make[5]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making install in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making install in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Not
[command output truncated]
p '/home/peter/result/bin'
 /usr/bin/install -c onig-config '/home/peter/result/bin'
 /usr/bin/mkdir -p '/home/peter/result/lib/pkgconfig'
 /usr/bin/install -c -m 644 oniguruma.pc '/home/peter/result/lib/pkgconfig'
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
mkdir -p src
  GEN      src/version.h
  CC       src/main.o
  CCLD     jq
make[3]: Entering directory '/home/peter/jq-1.8.1'
mkdir -p src
  GEN      src/version.h
  CC       src/main.o
  CCLD     jq
 /usr/bin/mkdir -p '/home/peter/result/lib'
 /bin/bash ./libtool   --mode=install /usr/bin/install -c   libjq.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libjq.lai /home/peter/result/lib/libjq.la
libtool: install: /usr/bin/install -c .libs/libjq.a /home/peter/result/lib/libjq.a
libtool: install: chmod 644 /home/peter/result/lib/libjq.a
libtool: install: ranlib /home/peter/result/lib/libjq.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /home/peter/result/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
 /usr/bin/mkdir -p '/home/peter/result/bin'
  /bin/bash ./libtool   --mode=install /usr/bin/install -c jq '/home/peter/result/bin'
libtool: install: /usr/bin/install -c jq /home/peter/result/bin/jq
 /usr/bin/mkdir -p '/home/peter/result/share/doc/jq'
 /usr/bin/install -c -m 644 README.md NEWS.md COPYING AUTHORS '/home/peter/result/share/doc/jq'
 /usr/bin/mkdir -p '/home/peter/result/include'
 /usr/bin/install -c -m 644 src/jv.h src/jq.h '/home/peter/result/include'
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /usr/bin/install -c -m 644 jq.1 '/home/peter/result/share/man/man1'
 /usr/bin/mkdir -p '/home/peter/result/lib/pkgconfig'
 /usr/bin/install -c -m 644 libjq.pc '/home/peter/result/lib/pkgconfig'
make[3]: Leaving directory '/home/peter/jq-1.8.1'
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'

↓ 112 lines

ASSISTANT

compile-bench> ln -sf /home/peter/result/bin/jq /home/peter/result/jq && ls -l /home/peter/result/jq /home/peter/result/bin/jq

-rwxr-xr-x 1 peter peter 911112 Sep 16 21:29 /home/peter/result/bin/jq
lrwxrwxrwx 1 peter peter     25 Sep 16 21:29 /home/peter/result/jq -> /home/peter/result/bin/jq

↓ 3 lines

ASSISTANT

compile-bench> file /home/peter/result/bin/jq && ldd /home/peter/result/bin/jq || true && readelf -l /home/peter/result/bin/jq | grep 'INTERP' || true && strings /home/peter/result/bin/jq | grep -i musl || true

/home/peter/result/bin/jq: ELF 64-bit LSB pie executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib/ld-musl-x86_64.so.1, stripped
/home/peter/result/bin/jq: error while loading shared libraries: /lib/x86_64-linux-gnu/libc.so: invalid ELF header
  INTERP         0x0000000000000238 0x0000000000000238 0x0000000000000238
/lib/ld-musl-x86_64.so.1
--prefix=/home/peter/result CC=musl-gcc 'CFLAGS=-O2 -pipe -static -s' LDFLAGS=-static

↓ 6 lines

ASSISTANT

Show reasoning

Evaluating static linking issues

I’m seeing that the report indicates the binary is dynamically linked, even though I set CFLAGS and LDFLAGS for static linking. This might be due to libtool or some build flags that override my settings. It looks like libtool isn’t using the LDFLAGS properly while linking. To resolve this, one approach I could take is to manually link the object files into a static binary, bypassing libtool completely. The goal is to ensure I produce an entirely static binary.Analyzing build artifacts for static linking

I need to check the build artifacts to find the object files in src/.libs. It looks like the static library libjq.a is located at /home/peter/result/lib/libjq.a, and libonig.a is installed as well. However, the binary 'jq' is created without the -static flag. Earlier logs indicated that musl-gcc accepted the static flag. Using '--disable-shared' during configuration might enforce static linking. Still, even if the static libs are created, I need to ensure LDFLAGS incorporate -static.Investigating linking issues with jq

I passed LDFLAGS=-static, but it seems like libtool might not be respecting that when linking an executable. Even though it should work, the file command indicates it’s dynamically linked to musl's dynamic loader. This suggests the binary isn't static. It might be that libtool creates a wrapper script in the source 'jq', which doesn't align with what we see since 'jq' in /home/peter/result/bin/jq is an ELF executable. I’ll investigate further by checking the 'jq' in the source tree for its file type and inspect other relevant files.

compile-bench> file /home/peter/jq-1.8.1/jq && readelf -l /home/peter/jq-1.8.1/jq | grep 'INTERP' || true && strings /home/peter/jq-1.8.1/jq | grep -i musl || true && ls -l /home/peter/jq-1.8.1/src/.libs || true

/home/peter/jq-1.8.1/jq: ELF 64-bit LSB pie executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib/ld-musl-x86_64.so.1, stripped
  INTERP         0x0000000000000238 0x0000000000000238 0x0000000000000238
/lib/ld-musl-x86_64.so.1
--prefix=/home/peter/result CC=musl-gcc 'CFLAGS=-O2 -pipe -static -s' LDFLAGS=-static
ls: cannot access '/home/peter/jq-1.8.1/src/.libs': No such file or directory

↓ 6 lines

ASSISTANT

compile-bench> cd /home/peter && rm -rf jq-1.8.1 && tar xzf jq.tar.gz && cd jq-1.8.1 && ./configure --prefix=/home/peter/result --disable-shared --enable-static CC=musl-gcc CFLAGS='-O2 -pipe -static -s' LDFLAGS='-static -Wl,-static' LIBS='-static'

checking for gcc... musl-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether musl-gcc accepts -g... yes
checking for musl-gcc option to enable C11 features... none needed
checking whether musl-gcc understands -c and -o together... yes
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for wchar.h... yes
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking whether make supports nested variables... yes
checking dependency style of musl-gcc... gcc3
checking whether make supports nested variables... (cached) yes
checking for ar... ar
checking the archiver (ar) interface... ar
checking whether to enable maintainer-specific portions of Makefiles... no
checking for gcc... (cached) musl-gcc
checking whether the compiler supports GNU C... (cached) yes
checking whether musl-gcc accepts -g... (cached) yes
checking for musl-gcc option to enable C11 features... (cached) none needed
checking whether musl-gcc understands -c and -o together... (cached) yes
checking how to run the C preprocessor... musl-gcc -E
checking for bison... bison -y
checking build system type... x86_64-pc-linux-musl
checking host system type... x86_64-pc-linux-musl
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by musl-gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-musl file names to x86_64-pc-linux-musl format... func_convert_file_noop
checking how to convert x86_64-pc-linux-musl file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
ch
[command output truncated]
ng the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from musl-gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if musl-gcc supports -fno-rtti -fno-exceptions... no
checking for musl-gcc option to produce PIC... -fPIC -DPIC
checking if musl-gcc PIC flag -fPIC -DPIC works... yes
checking if musl-gcc static flag -static works... yes
checking if musl-gcc supports -c -o file.o... yes
checking if musl-gcc supports -c -o file.o... (cached) yes
checking whether the musl-gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... no
checking whether to build static libraries... yes
checking whether make sets $(MAKE)... (cached) yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking for sys/times.h... yes
checking size of int... 4
checking size of long... 8
checking size of long long... 8
checking size of void*... 8
checking for size_t... yes
checking for working alloca.h... yes
checking for alloca... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating test/Makefile
config.status: creating sample/Makefile
config.status: creating onig-config
config.status: creating src/config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default commands

↓ 130 lines

ASSISTANT

Show reasoning

Configuring build process

I'm reconfiguring the build process with the flag to disable shared libraries. Next, I'll need to run 'make clean' followed by 'make' and 'make install' to ensure a proper static build. I think it's efficient to use the command 'make -j$(nproc)' to speed things up by utilizing all available CPU cores. This way, I’ll make the most out of the build process and avoid any hiccups!

compile-bench> cd /home/peter/jq-1.8.1 && make -j$(nproc)

mkdir -p src
mkdir -p src
  GEN      src/builtin.inc
  GEN      src/config_opts.inc
mkdir -p src
  GEN      src/version.h
make  all-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making all in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making all in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make  all-am
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -pipe -static -s -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c -o regparse.lo regparse.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -pipe -static -s -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c -o regcomp.lo regcomp.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -pipe -static -s -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c -o regexec.lo regexec.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -pipe -static -s -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c -o regenc.lo regenc.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -pipe -static -s -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c -o regerror.lo regerror.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -pipe -static -s -MT regext.lo -MD -MP -MF .deps/regext.Tpo -c -o regext.lo regext.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -pipe -static -s -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c -o regsyntax.lo regsyntax.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -pipe -static -s -MT regtrav.lo -MD -MP -MF .deps/regtrav.Tpo -c -o regtrav.lo regtrav.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -O2 -pipe -s -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c regparse.c -o regparse.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -O2 -pipe -s -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c regcomp.c -o regcomp.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -O2 -pipe -s -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c regerror.c -o regerror.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -O2 -pipe -s -MT regext.lo -MD -MP -MF .deps/regext.Tpo -c regext.c -o regext.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -O2 -pipe -s -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c regenc.c -o regenc.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -O2 -pipe -s -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c regsyntax.c -o regsyntax.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -O2 -pipe -s -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c regexec.c -o regexec.o
libtool
[command output truncated]
o sjis_prop.lo iso8859_1.lo iso8859_2.lo iso8859_3.lo iso8859_4.lo iso8859_5.lo iso8859_6.lo iso8859_7.lo iso8859_8.lo iso8859_9.lo iso8859_10.lo iso8859_11.lo iso8859_13.lo iso8859_14.lo iso8859_15.lo iso8859_16.lo euc_tw.lo euc_kr.lo big5.lo gb18030.lo koi8_r.lo cp1251.lo onig_init.lo  -static
libtool: link: ar cr .libs/libonig.a  regparse.o regcomp.o regexec.o regenc.o regerror.o regext.o regsyntax.o regtrav.o regversion.o st.o reggnu.o unicode.o unicode_unfold_key.o unicode_fold1_key.o unicode_fold2_key.o unicode_fold3_key.o ascii.o utf8.o utf16_be.o utf16_le.o utf32_be.o utf32_le.o euc_jp.o euc_jp_prop.o sjis.o sjis_prop.o iso8859_1.o iso8859_2.o iso8859_3.o iso8859_4.o iso8859_5.o iso8859_6.o iso8859_7.o iso8859_8.o iso8859_9.o iso8859_10.o iso8859_11.o iso8859_13.o iso8859_14.o iso8859_15.o iso8859_16.o euc_tw.o euc_kr.o big5.o gb18030.o koi8_r.o cp1251.o onig_init.o
libtool: link: ranlib .libs/libonig.a
libtool: link: ( cd ".libs" && rm -f "libonig.la" && ln -s "../libonig.la" "libonig.la" )
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making all in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making all in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
sed -e 's,[@]datadir[@],/home/peter/result/share,g' -e 's,[@]datarootdir[@],/home/peter/result/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/home/peter/result,g' -e 's,[@]exec_prefix[@],/home/peter/result,g' -e 's,[@]libdir[@],/home/peter/result/lib,g' -e 's,[@]includedir[@],/home/peter/result/include,g' < ./oniguruma.pc.in > oniguruma.pc
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
  CC       src/builtin.lo
  CC       src/bytecode.lo
  CC       src/compile.lo
  CC       src/execute.lo
  CC       src/jq_test.lo
  CC       src/jv.lo
  CC       src/jv_alloc.lo
  CC       src/jv_aux.lo
  CC       src/jv_dtoa.lo
  CC       src/jv_file.lo
  CC       src/jv_parse.lo
  CC       src/jv_print.lo
  CC       src/jv_unicode.lo
  CC       src/linker.lo
  CC       src/locfile.lo
  CC       src/util.lo
  CC       src/jv_dtoa_tsd.lo
  CC       vendor/decNumber/decContext.lo
  CC       vendor/decNumber/decNumber.lo
  CC       src/lexer.lo
  CC       src/parser.lo
mkdir -p src
  GEN      src/version.h
  CC       src/main.o
  CCLD     libjq.la
  CCLD     jq
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'

↓ 79 lines

ASSISTANT

compile-bench> file /home/peter/jq-1.8.1/jq && readelf -l /home/peter/jq-1.8.1/jq | grep 'INTERP' || true && strings /home/peter/jq-1.8.1/jq | grep -i musl || true

/home/peter/jq-1.8.1/jq: ELF 64-bit LSB pie executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib/ld-musl-x86_64.so.1, stripped
  INTERP         0x0000000000000238 0x0000000000000238 0x0000000000000238
/lib/ld-musl-x86_64.so.1
--prefix=/home/peter/result --disable-shared --enable-static CC=musl-gcc 'CFLAGS=-O2 -pipe -static -s' 'LDFLAGS=-static -Wl,-static' LIBS=-static
MUSL_LOCPATH

↓ 6 lines

ASSISTANT

compile-bench> find /home/peter/jq-1.8.1 -name 'libjq.a' -o -name '*.o' -o -name '*.la' | sed -n '1,200p'

/home/peter/jq-1.8.1/vendor/oniguruma/src/euc_jp.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/iso8859_5.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/utf32_le.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/regenc.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/iso8859_9.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/iso8859_16.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/cp1251.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/utf16_be.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/euc_tw.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/regext.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/iso8859_13.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/sjis_prop.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/regexec.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/onig_init.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/unicode_fold2_key.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/utf32_be.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/ascii.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/iso8859_8.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/utf8.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/unicode_fold1_key.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/iso8859_4.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/libonig.la
/home/peter/jq-1.8.1/vendor/oniguruma/src/big5.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/iso8859_11.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/regtrav.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/iso8859_2.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/regversion.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/regsyntax.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/unicode_fold3_key.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/.libs/libonig.la
/home/peter/jq-1.8.1/vendor/oniguruma/src/iso8859_1.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/koi8_r.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/iso8859_6.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/iso8859_7.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/sjis.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/iso8859_15.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/euc_kr.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/iso8859_3.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/utf16_le.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/gb18030.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/unicode_unfold_key.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/regcomp.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/regparse.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/st.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/iso8859_10.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/iso8859_14.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/unicode.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/regerror.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/reggnu.o
/home/peter/jq-1.8.1/vendor/oniguruma/src/euc_jp_prop.o
/home/peter/jq-1.8.1/vendor/decNumber/decNumber.o
/home/peter/jq-1.8.1/vendor/decNumber/decContext.o
/home/peter/jq-1.8.1/.libs/libjq.a
/home/peter/jq-1.8.1/.libs/libjq.la
/home/peter/jq-1.8.1/libjq.la
/home/peter/jq-1.8.1/src/jq_test.o
/home/peter/jq-1.8.1/src/jv_print.o
/home/peter/jq-1.8.1/src/compile.o
/home/peter/jq-1.8.1/src/locfile.o
/home/peter/jq-1.8.1/src/execute.o
/home/peter/jq-1.8.1/src/jv_unicode.o
/home/peter/jq-1.8.1/src/jv_alloc.o
/home/peter/jq-1.8.1/src/bytecode.o
/home/peter/jq-1.8.1/src/jv_dtoa_tsd.o
/home/peter/jq-1.8.1/src/jv_parse.o
/home/peter/jq-1.8.1/src/jv.o
/home/peter/jq-1.8.1/src/jv_file.o
/home/peter/jq-1.8.1/src/lexer.o
/home/peter/jq-1.8.1/src/parser.o
/home/peter/jq-1.8.1/src/util.o
/home/peter/jq-1.8.1/src/main.o
/home/peter/jq-1.8.1/src/jv_aux.o
/home/peter/jq-1.8.1/src/builtin.o
/home/peter/jq-1.8.1/src/linker.o
/home/peter/jq-1.8.1/src/jv_dtoa.o

↓ 76 lines

ASSISTANT

compile-bench> musl-gcc -static -s -o /home/peter/result/bin/jq /home/peter/jq-1.8.1/.libs/libjq.a /home/peter/jq-1.8.1/vendor/oniguruma/src/.libs/libonig.a -ldl -lm -pthread || true

/usr/bin/ld: /usr/lib/x86_64-linux-musl/Scrt1.o: in function `_start_c':
./crt/crt1.c:18: undefined reference to `main'
collect2: error: ld returned 1 exit status

↓ 4 lines

ASSISTANT

compile-bench> ar t /home/peter/jq-1.8.1/.libs/libjq.a | sed -n '1,200p'

builtin.o
bytecode.o
compile.o
execute.o
jq_test.o
jv.o
jv_alloc.o
jv_aux.o
jv_dtoa.o
jv_file.o
jv_parse.o
jv_print.o
jv_unicode.o
linker.o
locfile.o
util.o
jv_dtoa_tsd.o
decContext.o
decNumber.o
lexer.o
parser.o

↓ 22 lines

ASSISTANT

compile-bench> musl-gcc -static -s -o /home/peter/result/bin/jq /home/peter/jq-1.8.1/src/main.o /home/peter/jq-1.8.1/.libs/libjq.a /home/peter/jq-1.8.1/vendor/oniguruma/src/.libs/libonig.a -ldl -lm -lpthread || true

[empty output]

ASSISTANT

compile-bench> file /home/peter/result/bin/jq && readelf -l /home/peter/result/bin/jq | grep 'INTERP' || true && ldd /home/peter/result/bin/jq || true && strings /home/peter/result/bin/jq | grep -i musl || true

/home/peter/result/bin/jq: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, stripped
	not a dynamic executable
--prefix=/home/peter/result --disable-shared --enable-static CC=musl-gcc 'CFLAGS=-O2 -pipe -static -s' 'LDFLAGS=-static -Wl,-static' LIBS=-static
MUSL_LOCPATH

↓ 5 lines

ASSISTANT

compile-bench> ls -l /home/peter/result/jq /home/peter/result/bin/jq && readelf -d /home/peter/result/bin/jq | sed -n '1,200p' || true

-rwxr-xr-x 1 peter peter 997336 Sep 16 21:31 /home/peter/result/bin/jq
lrwxrwxrwx 1 peter peter     25 Sep 16 21:29 /home/peter/result/jq -> /home/peter/result/bin/jq

There is no dynamic section in this file.

↓ 5 lines

ASSISTANT

compile-bench> strings /home/peter/result/bin/jq | egrep -i 'musl|ld-musl' || true

--prefix=/home/peter/result --disable-shared --enable-static CC=musl-gcc 'CFLAGS=-O2 -pipe -static -s' 'LDFLAGS=-static -Wl,-static' LIBS=-static
MUSL_LOCPATH

↓ 3 lines

ASSISTANT

compile-bench> /home/peter/result/bin/jq --version

jq-1.8.1

ASSISTANT

Done — I built jq v1.8.1 with musl and produced a statically linked musl binary, installed to /home/peter/result, and created the requested symlink.

What I did (high level)
- Installed build tools and musl toolchain.
- Extracted /home/peter/jq.tar.gz, configured with musl-gcc and static options, built jq.
- Installed into /home/peter/result (make install) and then produced a fully static musl-linked executable by linking the built objects with musl-gcc.
- Created the symlink /home/peter/result/jq -> /home/peter/result/bin/jq.

Verification (actual outputs)
- Binary exists and is statically linked:
- file /home/peter/result/bin/jq
-> /home/peter/result/bin/jq: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, stripped
- Symlink:
- ls -l /home/peter/result/jq /home/peter/result/bin/jq
-> -rwxr-xr-x 1 peter peter 997336 Sep 16 21:31 /home/peter/result/bin/jq
lrwxrwxrwx 1 peter peter 25 Sep 16 21:29 /home/peter/result/jq -> /home/peter/result/bin/jq
- jq runs and reports version:
- /home/peter/result/bin/jq --version
-> jq-1.8.1
- Evidence the binary was built with musl:
- strings /home/peter/result/bin/jq | egrep -i 'musl|ld-musl'
-> shows MUSL_LOCPATH (musl-related symbols/metadata are embedded)

Paths
- Compiled binary: /home/peter/result/bin/jq
- Symlink: /home/peter/result/jq -> /home/peter/result/bin/jq

If you want, I can:
- Rebuild with different optimization/strip flags.
- Produce a single static binary with a different name/location.
- Provide the exact commands I executed.

Task finished successfully, all checks passed!

Checks passed:

jq binary exists

jq is statically linked

jq binary appears to be linked with musl

jq works