| Cost | $0.036 |
| Total elapsed time | 42s |
| LLM inference time | 41s |
| Command execution time | 1s |
| Commands executed | 10 |
All details >
| Attempt ID | hn2ban9rpomce | Attempt group | run-23-09-21-48 |
| Revision | ad46875d9374 | AWS Instance | m8i.2xlarge |
| Start time | 2025-09-23T20:13:49.625Z | End time | 2025-09-23T20:14:31.891Z |
| Task | cowsay | Environment | ubuntu-22.04-amd64-offline |
| Model |  gpt-5-codex-high | OpenRouter slug | openai/gpt-5-codex |
| Temperature | 1 | Explicit prompt caching | false |
| User msg after tool call | false | Max tool calls | 50 |
| Total timeout seconds | 900 | Single command timeout | 600 |
| Cost | $0.036 | Duration | 42s |
| LLM inference time | 41s | Command execution time | 1s |
| Final context tokens | 4,128 | Total output tokens | 1,667 |
| Output reasoning tokens | 1,216 | Messages | 23 |
| Assistant messages | 11 | User messages | 1 |
| System messages | 1 | Commands executed | 10 |
Cowsay 3.8.4 is an ASCII-art speech bubble generator.
Project link: github.com/cowsay-org/cowsay.
Task:
Install the cowsay package to a specific location.
Difficulties:
Since cowsay is just a single Perl script it doesn't require any compilation, however it comes with several asset files that need to be copied as well.
Environment:
Ubuntu 22.04 on amd64, without internet access.
You are a package-building specialist operating a Ubuntu 22.04 bash shell via one tool: run_terminal_cmd.
The current working directory of every run_terminal_cmd is /home/peter.
Execution rules:
- Always pass non-interactive flags for any command that could prompt (e.g., -y, --yes, DEBIAN_FRONTEND=noninteractive).
- Don't include any newlines in the command.
- The environment is offline, assume you have all the necessary tools already installed.
If you encounter any errors or issues while doing the user's request, you must fix them and continue the task.
At the end verify you did the user request correctly.
You are given a cowsay v3.8.4 source code at /home/peter/cowsay.tar.gz. Please compile the cowsay package and install it to /home/peter/result. Create a symlink from /home/peter/result/cowsay to the actual binary.
Show reasoning
Preparing to compile and install cowsay
[empty output]
Show reasoning
Listing directory contents
cowsay-3.8.4 cowsay.tar.gz
Show reasoning
Preparing to explore build directory
compile-bench> cd cowsay-3.8.4 && ls CHANGELOG.md INSTALL Makefile README.md bin man share
CONTRIBUTORS.md LICENSE.txt README archive doc-project man-src
↓ 3 lines
CHANGELOG.md INSTALL Makefile README.md bin man share CONTRIBUTORS.md LICENSE.txt README archive doc-project man-src
Show reasoning
Preparing to build cowsay
compile-bench> cd cowsay-3.8.4 && sed -n '1,40p' Makefile # Makefile for Cowsay
PACKAGE_TARNAME = cowsay
prefix = /usr/local
exec_prefix = ${prefix}
bindir = ${exec_prefix}/bin
datarootdir = ${prefix}/share
datadir = ${datarootdir}
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
sysconfdir = ${prefix}/etc
mandir=${datarootdir}/man
pkgdatadir = ${datadir}/${PACKAGE_TARNAME}
cowsdir = ${pkgdatadir}/cows
sitecowsdir = ${pkgdatadir}/site-cows
pkgsysconfdir = ${sysconfdir}/${PACKAGE_TARNAME}
cowpathdir = ${pkgsysconfdir}/cowpath.d
srcdir = .
SHELL = /bin/sh
# Make standard tools overridable, e.g. for testing with busybox.
ASCIIDOCTOR = asciidoctor
AWK = awk
CUT = cut
GREP = grep
EGREP = $(GREP) -E
INSTALL = install -c
INSTALL_PROGRAM = $(INSTALL)
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_DIR = $(INSTALL) -d
LN = ln
LN_S = $(LN) -s
PRINTF = printf
SORT = sort
WC = wc
↓ 40 lines
# Makefile for Cowsay
PACKAGE_TARNAME = cowsay
prefix = /usr/local
exec_prefix = ${prefix}
bindir = ${exec_prefix}/bin
datarootdir = ${prefix}/share
datadir = ${datarootdir}
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
sysconfdir = ${prefix}/etc
mandir=${datarootdir}/man
pkgdatadir = ${datadir}/${PACKAGE_TARNAME}
cowsdir = ${pkgdatadir}/cows
sitecowsdir = ${pkgdatadir}/site-cows
pkgsysconfdir = ${sysconfdir}/${PACKAGE_TARNAME}
cowpathdir = ${pkgsysconfdir}/cowpath.d
srcdir = .
SHELL = /bin/sh
# Make standard tools overridable, e.g. for testing with busybox.
ASCIIDOCTOR = asciidoctor
AWK = awk
CUT = cut
GREP = grep
EGREP = $(GREP) -E
INSTALL = install -c
INSTALL_PROGRAM = $(INSTALL)
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_DIR = $(INSTALL) -d
LN = ln
LN_S = $(LN) -s
PRINTF = printf
SORT = sort
WC = wc
Show reasoning
Checking installation target
compile-bench> cd cowsay-3.8.4 && sed -n '40,160p' Makefile
# If you implement support for *.pm cows, add share/cows/*.pm here.
#
# Note that this is a list of shell globs to be evaluated by the shell, not a list of
# files to be evaluated by make.
COW_FILES = share/cowsay/cows/*.cow
.PHONY: all
all:
@echo "Nothing to do - 'make all' is a no-op."
.PHONY: clean
clean:
@echo "Nothing to do - 'make clean' is a no-op."
# The 'man' target creates cowsay.1, cowthink.1, and other man pages.
#
# The 'man' target is intended for use at authoring time, not at build time, so it is not
# part of the normal build sequence, and its outputs are checked into the source repo.
#
# This is partially to simplify the build process, and partially to preserve the internal
# "update" timestamp inside the man pages. We also do this at authoring time instead of
# install time to avoid introducing a dependency on Asciidoctor for users.
.PHONY: man
man: man-src/man1/cowsay.1.adoc man/man1/cowsay.1
# asciidoctor generates both cowsay.1 and cowthink.1, but the cowthink.1 uses an '.so'
# include macro that doesn't work on some systems, but symlinks do.
# cowthink.1 is generated as a side effect of cowsay.1, but I'm not sure how
# to declare that without a redundant target definition.
# Must delete any existing cowthink.1 symlink *first*, or it may clobber the cowsay.1 file
# with the wrong contents.
man/man1/cowsay.1: man-src/man1/cowsay.1.adoc
mkdir -p man/man1
rm -f man/man1/cowthink.1
$(ASCIIDOCTOR) -b manpage -D man/man1 man-src/man1/cowsay.1.adoc
rm -f man/man1/cowthink.1
$(LN_S) cowsay.1 man/man1/cowthink.1
.PHONY: install
install:
$(INSTALL_DIR) $(DESTDIR)$(cowpathdir)
$(INSTALL_DIR) $(DESTDIR)$(bindir)
$(INSTALL_PROGRAM) bin/cowsay $(DESTDIR)$(bindir)/cowsay
$(LN_S) cowsay $(DESTDIR)$(bindir)/cowthink
$(INSTALL_DIR) $(DESTDIR)$(mandir)/man1
$(INSTALL_DATA) man/man1/cowsay.1 $(DESTDIR)$(mandir)/man1/cowsay.1
$(LN_S) cowsay.1 $(DESTDIR)$(mandir)/man1/cowthink.1
$(INSTALL_DIR) $(DESTDIR)$(cowsdir)
$(INSTALL_DATA) $(COW_FILES) $(DESTDIR)$(cowsdir)
$(INSTALL_DIR) $(DESTDIR)$(sitecowsdir)
.PHONY: uninstall
uninstall:
@set -e; \
for f in \
$(DESTDIR)$(bindir)/cowsay \
$(DESTDIR)$(bindir)/cowthink \
$(DESTDIR)$(mandir)/man1/cowsay.1 \
$(DESTDIR)$(mandir)/man1/cowthink.1 \
; do \
if test -f "$$f" || test -L "$$f"; then \
echo "rm -f $$f"; \
rm -f "$$f"; \
fi; \
done
@set -e; \
for cow in $(COW_FILES); do \
dcow="$(DESTDIR)$(cowsdir)/$$(basename "$$cow")"; \
if test -f "$$dcow"; then \
echo "rm -f $$dcow"; \
rm -f "$$dcow"; \
fi; \
done
@set -e; \
for dir in $(cowsdir) $(sitecowsdir) $(pkgdatadir) $(cowpathdir) $(pkgsysconfdir); do \
$(PRINTF) "%s\n" "$$dir"; \
done \
| $(AWK) '{ print length, $$0 }' | $(SORT) -n -r | $(CUT) -d" " -f2- \
| while read dir; do \
if test "x$$($(PRINTF) "%s" "$$dir" | $(EGREP) '/.*/$(PACKAGE_TARNAME)(/|$$)' | $(WC) -c)" != x0; then \
dd="$(DESTDIR)$${dir}"; \
if test -d "$$dd"; then \
echo "rmdir $$dd"; \
rmdir "$$dd" ||:; \
fi; \
fi; \
done
↓ 89 lines
# If you implement support for *.pm cows, add share/cows/*.pm here.
#
# Note that this is a list of shell globs to be evaluated by the shell, not a list of
# files to be evaluated by make.
COW_FILES = share/cowsay/cows/*.cow
.PHONY: all
all:
@echo "Nothing to do - 'make all' is a no-op."
.PHONY: clean
clean:
@echo "Nothing to do - 'make clean' is a no-op."
# The 'man' target creates cowsay.1, cowthink.1, and other man pages.
#
# The 'man' target is intended for use at authoring time, not at build time, so it is not
# part of the normal build sequence, and its outputs are checked into the source repo.
#
# This is partially to simplify the build process, and partially to preserve the internal
# "update" timestamp inside the man pages. We also do this at authoring time instead of
# install time to avoid introducing a dependency on Asciidoctor for users.
.PHONY: man
man: man-src/man1/cowsay.1.adoc man/man1/cowsay.1
# asciidoctor generates both cowsay.1 and cowthink.1, but the cowthink.1 uses an '.so'
# include macro that doesn't work on some systems, but symlinks do.
# cowthink.1 is generated as a side effect of cowsay.1, but I'm not sure how
# to declare that without a redundant target definition.
# Must delete any existing cowthink.1 symlink *first*, or it may clobber the cowsay.1 file
# with the wrong contents.
man/man1/cowsay.1: man-src/man1/cowsay.1.adoc
mkdir -p man/man1
rm -f man/man1/cowthink.1
$(ASCIIDOCTOR) -b manpage -D man/man1 man-src/man1/cowsay.1.adoc
rm -f man/man1/cowthink.1
$(LN_S) cowsay.1 man/man1/cowthink.1
.PHONY: install
install:
$(INSTALL_DIR) $(DESTDIR)$(cowpathdir)
$(INSTALL_DIR) $(DESTDIR)$(bindir)
$(INSTALL_PROGRAM) bin/cowsay $(DESTDIR)$(bindir)/cowsay
$(LN_S) cowsay $(DESTDIR)$(bindir)/cowthink
$(INSTALL_DIR) $(DESTDIR)$(mandir)/man1
$(INSTALL_DATA) man/man1/cowsay.1 $(DESTDIR)$(mandir)/man1/cowsay.1
$(LN_S) cowsay.1 $(DESTDIR)$(mandir)/man1/cowthink.1
$(INSTALL_DIR) $(DESTDIR)$(cowsdir)
$(INSTALL_DATA) $(COW_FILES) $(DESTDIR)$(cowsdir)
$(INSTALL_DIR) $(DESTDIR)$(sitecowsdir)
.PHONY: uninstall
uninstall:
@set -e; \
for f in \
$(DESTDIR)$(bindir)/cowsay \
$(DESTDIR)$(bindir)/cowthink \
$(DESTDIR)$(mandir)/man1/cowsay.1 \
$(DESTDIR)$(mandir)/man1/cowthink.1 \
; do \
if test -f "$$f" || test -L "$$f"; then \
echo "rm -f $$f"; \
rm -f "$$f"; \
fi; \
done
@set -e; \
for cow in $(COW_FILES); do \
dcow="$(DESTDIR)$(cowsdir)/$$(basename "$$cow")"; \
if test -f "$$dcow"; then \
echo "rm -f $$dcow"; \
rm -f "$$dcow"; \
fi; \
done
@set -e; \
for dir in $(cowsdir) $(sitecowsdir) $(pkgdatadir) $(cowpathdir) $(pkgsysconfdir); do \
$(PRINTF) "%s\n" "$$dir"; \
done \
| $(AWK) '{ print length, $$0 }' | $(SORT) -n -r | $(CUT) -d" " -f2- \
| while read dir; do \
if test "x$$($(PRINTF) "%s" "$$dir" | $(EGREP) '/.*/$(PACKAGE_TARNAME)(/|$$)' | $(WC) -c)" != x0; then \
dd="$(DESTDIR)$${dir}"; \
if test -d "$$dd"; then \
echo "rmdir $$dd"; \
rmdir "$$dd" ||:; \
fi; \
fi; \
done
Show reasoning
Evaluating Makefile installation with custom prefix
compile-bench> cd cowsay-3.8.4 && make prefix=/home/peter/result install install -c -d /home/peter/result/etc/cowsay/cowpath.d
install -c -d /home/peter/result/bin
install -c bin/cowsay /home/peter/result/bin/cowsay
ln -s cowsay /home/peter/result/bin/cowthink
install -c -d /home/peter/result/share/man/man1
install -c -m 644 man/man1/cowsay.1 /home/peter/result/share/man/man1/cowsay.1
ln -s cowsay.1 /home/peter/result/share/man/man1/cowthink.1
install -c -d /home/peter/result/share/cowsay/cows
install -c -m 644 share/cowsay/cows/*.cow /home/peter/result/share/cowsay/cows
install -c -d /home/peter/result/share/cowsay/site-cows
↓ 11 lines
install -c -d /home/peter/result/etc/cowsay/cowpath.d install -c -d /home/peter/result/bin install -c bin/cowsay /home/peter/result/bin/cowsay ln -s cowsay /home/peter/result/bin/cowthink install -c -d /home/peter/result/share/man/man1 install -c -m 644 man/man1/cowsay.1 /home/peter/result/share/man/man1/cowsay.1 ln -s cowsay.1 /home/peter/result/share/man/man1/cowthink.1 install -c -d /home/peter/result/share/cowsay/cows install -c -m 644 share/cowsay/cows/*.cow /home/peter/result/share/cowsay/cows install -c -d /home/peter/result/share/cowsay/site-cows
Show reasoning
Creating symlink for binary
[empty output]
Show reasoning
Checking result directory contents
compile-bench> ls -l /home/peter/result total 12
drwxr-xr-x 2 peter peter 4096 Sep 23 20:14 bin
lrwxrwxrwx 1 peter peter 29 Sep 23 20:14 cowsay -> /home/peter/result/bin/cowsay
drwxr-xr-x 3 peter peter 4096 Sep 23 20:14 etc
drwxr-xr-x 4 peter peter 4096 Sep 23 20:14 share
↓ 6 lines
total 12 drwxr-xr-x 2 peter peter 4096 Sep 23 20:14 bin lrwxrwxrwx 1 peter peter 29 Sep 23 20:14 cowsay -> /home/peter/result/bin/cowsay drwxr-xr-x 3 peter peter 4096 Sep 23 20:14 etc drwxr-xr-x 4 peter peter 4096 Sep 23 20:14 share
Show reasoning
Checking for binary existence
compile-bench> ls -l /home/peter/result/bin total 12
-rwxr-xr-x 1 peter peter 9713 Sep 23 20:14 cowsay
lrwxrwxrwx 1 peter peter 6 Sep 23 20:14 cowthink -> cowsay
↓ 4 lines
total 12 -rwxr-xr-x 1 peter peter 9713 Sep 23 20:14 cowsay lrwxrwxrwx 1 peter peter 6 Sep 23 20:14 cowthink -> cowsay
Show reasoning
Preparing to verify binary execution
compile-bench> /home/peter/result/bin/cowsay moo _____
< moo >
-----
\ ^__^
\ (oo)\_______
(__)\ )\/\
||----w |
|| ||
↓ 9 lines
_____
< moo >
-----
\ ^__^
\ (oo)\_______
(__)\ )\/\
||----w |
|| ||
Show reasoning
Summarizing verification and results
- Extracted cowsay-3.8.4 from the provided tarball.
- Installed the package with make prefix=/home/peter/result install, placing binaries, man pages, and data files under /home/peter/result.
- Created the symlink /home/peter/result/cowsay pointing to /home/peter/result/bin/cowsay.
Verification: running /home/peter/result/bin/cowsay moo produced the expected ASCII output, and ls -l /home/peter/result confirms the new files and symlink.