CompileBench Attempt: curl-ssl-arm64-static2, claude-sonnet-4.5-thinking-16k, hjiyd7cnuvr2j

<- Ranking

Summary

Task

curl-ssl-arm64-static2

Model

claude-sonnet-4.5-thinking-16k

Status

Success

Performance

Cost	$1.025
Total elapsed time	8m3s
LLM inference time	4m23s
Command execution time	3m40s
Commands executed	53

All details >

Attempt ID	`hjiyd7cnuvr2j`	Attempt group	run-29-09-25-19-32
Revision	`0cfc533b3f68`	AWS Instance	m8i.2xlarge
Start time	2025-09-29T17:50:44.041Z	End time	2025-09-29T17:58:50.904Z
Task	curl-ssl-arm64-static2	Environment	ubuntu-22.04-amd64-cross-arm64
Model	claude-sonnet-4.5-thinking-16k	OpenRouter slug	`anthropic/claude-sonnet-4.5`
Temperature	1	Explicit prompt caching	true
User msg after tool call	true	Max tool calls	150
Total timeout seconds	3600	Single command timeout	1800
Cost	$1.025	Duration	8m3s
LLM inference time	4m23s	Command execution time	3m40s
Final context tokens	62,141	Total output tokens	10,345
Output reasoning tokens	3,607	Messages	109
Assistant messages	54	User messages	1
System messages	1	Commands executed	53

Download full attempt result JSON

Task

Task: curl-ssl-arm64-static2

curl 8.16.0 is a command-line HTTP client.
Project link: curl.se

Task:
Compile and install curl to a specific location. Build with SSL support (TLS v1.3), brotli, zlib and zstd. Cross-compile to arm64. Link it statically. This is a variant of curl-ssl-arm64-static, with a hint to do a trial run of compiled binary.

Difficulties:
Cross-compilation toolchain setup, manually cross-compiling all dependencies, properly configuring SSL certificates in OpenSSL.

Environment:
Ubuntu 22.04 on amd64, with internet access.

View task page

Execution log

SYSTEM

You are a package-building specialist operating a Ubuntu 22.04 bash shell via one tool: run_terminal_cmd.
The current working directory of every run_terminal_cmd is /home/peter.
Execution rules:
- Always pass non-interactive flags for any command that could prompt (e.g., -y, --yes, DEBIAN_FRONTEND=noninteractive).
- Don't include any newlines in the command.
- You can use sudo.
If you encounter any errors or issues while doing the user's request, you must fix them and continue the task.
At the end verify you did the user request correctly.

USER

You are given a curl v8.16.0 source code at /home/peter/curl.tar.gz. Please compile curl and install it to /home/peter/result. Create a symlink from /home/peter/result/curl to the actual binary. Make sure it builds with SSL support (TLS v1.3), brotli, zlib and zstd. The binary should be statically compiled for arm64. Do a trial run via qemu-aarch64-static, making sure this EXACT command works correctly: curl https://google.com

ASSISTANT

Show reasoning

Let me break down the task:
1. Extract curl v8.16.0 source code from /home/peter/curl.tar.gz
2. Compile curl with:
- SSL support (TLS v1.3)
- brotli support
- zlib support
- zstd support
- Static compilation
- For arm64 architecture
3. Install to /home/peter/result
4. Create a symlink from /home/peter/result/curl to the actual binary
5. Test using qemu-aarch64-static with the command: curl https://google.com

This is a cross-compilation task for arm64. I'll need to:
1. Install cross-compilation tools for arm64
2. Install or build static libraries for arm64: OpenSSL (with TLS 1.3), brotli, zlib, zstd
3. Configure and build curl with these dependencies
4. Install qemu-user-static to run the arm64 binary
5. Test the binary

Let me start by checking what's available and then proceed with the compilation.

I'll help you compile curl statically for arm64 with SSL, brotli, zlib, and zstd support. This is a complex task involving cross-compilation. Let me start by setting up the environment.

compile-bench> cd /home/peter && ls -lh curl.tar.gz

-rw-r--r-- 1 peter peter 4.0M Sep 29 17:50 curl.tar.gz

ASSISTANT

Show reasoning

The user wants me to:
1. Extract curl v8.16.0 source code from /home/peter/curl.tar.gz
2. Compile it statically for arm64
3. Install to /home/peter/result
4. Create a symlink from /home/peter/result/curl to the actual binary
5. Build with SSL support (TLS v1.3), brotli, zlib, and zstd
6. Test it with qemu-aarch64-static running the exact command: curl https://google.com

This is a complex cross-compilation task. Let me break it down:

1. First, extract the source
2. Install cross-compilation tools for arm64
3. Build static versions of dependencies (openssl, brotli, zlib, zstd) for arm64
4. Build curl statically for arm64
5. Install to /home/peter/result
6. Create the symlink
7. Test with qemu

Let me start step by step.

compile-bench> cd /home/peter && tar -xzf curl.tar.gz && ls -la

total 4108
drwxr-x---  1 peter peter    4096 Sep 29 17:50 .
drwxr-xr-x  1 root  root     4096 Sep 15 11:21 ..
-rw-r--r--  1 peter peter     220 Jan  6  2022 .bash_logout
-rw-r--r--  1 peter peter    3771 Jan  6  2022 .bashrc
-rw-r--r--  1 peter peter     807 Jan  6  2022 .profile
drwxr-xr-x 14 peter peter    4096 Sep 10 05:43 curl-8.16.0
-rw-r--r--  1 peter peter 4176617 Sep 29 17:50 curl.tar.gz

↓ 9 lines

ASSISTANT

Show reasoning

Good, curl is extracted. Now I need to:
1. Install cross-compilation toolchain for arm64
2. Install qemu-aarch64-static for testing
3. Build static versions of dependencies (OpenSSL/libressl, brotli, zlib, zstd) for arm64
4. Build curl statically for arm64 with those dependencies
5. Test with qemu-aarch64-static

Let me start by installing the necessary packages.

compile-bench> sudo apt-get update -y

0% [Working]
            
Hit:1 http://archive.ubuntu.com/ubuntu jammy InRelease

0% [Waiting for headers] [Connecting to security.ubuntu.com (185.125.190.39)]
                                                                             
Get:2 http://archive.ubuntu.com/ubuntu jammy-updates InRelease [128 kB]

0% [2 InRelease 12.7 kB/128 kB 10%] [Connecting to security.ubuntu.com (185.125
                                                                               
0% [2 InRelease 38.8 kB/128 kB 30%] [Waiting for headers]
                                                         
0% [Waiting for headers] [Waiting for headers]
                                              
Get:3 http://archive.ubuntu.com/ubuntu jammy-backports InRelease [127 kB]

0% [3 InRelease 6932 B/127 kB 5%] [Waiting for headers]
                                                       
Get:4 http://security.ubuntu.com/ubuntu jammy-security InRelease [129 kB]

0% [3 InRelease 95.3 kB/127 kB 75%] [4 InRelease 14.2 kB/129 kB 11%]
                                                                    
0% [4 InRelease 14.2 kB/129 kB 11%]
0% [4 InRelease 14.2 kB/129 kB 11%]
                                   
Get:5 http://archive.ubuntu.com/ubuntu jammy-updates/universe amd64 Packages [1577 kB]

0% [5 Packages 6999 B/1577 kB 0%] [4 InRelease 14.2 kB/129 kB 11%]
0% [5 Packages 198 kB/1577 kB 13%] [4 InRelease 14.2 kB/129 kB 11%]
                                                                   
0% [4 InRelease 31.5 kB/129 kB 24%]
0% [5 Packages store 0 B] [4 InRelease 31.5 kB/129 kB 24%]
                                                          
Get:6 http://archive.ubuntu.com/ubuntu jammy-updates/restricted amd64 Packages [5804 kB]

0% [5 Packages store 0 B] [6 Packages 66.9 kB/5804 kB 1%] [4 InRelease 43.1 kB/
                                                                               
0% [6 Packages 1927 kB/5804 kB 33%] [4 InRelease 43.1 kB/129 kB 33%]
                                                                    
Get:7 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 Packages [3690 kB]

                                                                    
0% [7 Packages 77.8 kB/3690 kB 2%] [4 InRelease 57.6 kB/129 kB 45%]
0% [6 Packages store 0 B] [7 Packages 77.8 kB/3690 kB 2%] [4 InRelease 57.6 kB/
                                                                               
Get:8 http://archive.ubuntu.com/ubuntu jammy-updates/multiverse amd64 Packages [69.1 kB]

0% [6 Packages store 0 B] [8 Packages 69.1 kB/69.1 kB 100%] [4 InRelease 69.2 k
                                                                               
Get:9 http://archive.ubuntu.com/ubuntu jammy-backports/universe amd64 Packages [35.2 kB]

0% [6 Packages store 0 B] [9 Packages 8080 B/35.2 kB 23%] [4 InRelease 69.2 kB/
                                                                               
0% [6 Packages store 0 B] [4 InRelease 69.2 kB/129 kB 54%]
                            
[command output truncated]
 headers]
58% [7 Packages store 0 B] [Waiting for headers]
                                                
Get:10 http://security.ubuntu.com/ubuntu jammy-security/restricted amd64 Packages [5609 kB]

58% [7 Packages store 0 B] [10 Packages 2655 B/5609 kB 0%]
                                                          
59% [10 Packages 86.6 kB/5609 kB 2%]
59% [8 Packages store 0 B] [10 Packages 86.6 kB/5609 kB 2%]
                                                           
60% [10 Packages 92.4 kB/5609 kB 2%]
60% [9 Packages store 0 B] [10 Packages 92.4 kB/5609 kB 2%]
                                                           
60% [10 Packages 95.3 kB/5609 kB 2%]
                                    
81% [Working]
81% [10 Packages store 0 B] [Waiting for headers]
                                                 
Get:11 http://security.ubuntu.com/ubuntu jammy-security/universe amd64 Packages [1274 kB]

81% [10 Packages store 0 B] [11 Packages 76.5 kB/1274 kB 6%]
                                                            
83% [11 Packages 424 kB/1274 kB 33%]
                                    
Get:12 http://security.ubuntu.com/ubuntu jammy-security/multiverse amd64 Packages [71.0 kB]

86% [12 Packages 32.8 kB/71.0 kB 46%]
86% [11 Packages store 0 B] [12 Packages 32.8 kB/71.0 kB 46%]
                                                             
86% [11 Packages store 0 B] [Waiting for headers]
                                                 
Get:13 http://security.ubuntu.com/ubuntu jammy-security/main amd64 Packages [3371 kB]

86% [11 Packages store 0 B] [13 Packages 24.6 kB/3371 kB 1%]
                                                            
89% [13 Packages 611 kB/3371 kB 18%]
89% [12 Packages store 0 B] [13 Packages 611 kB/3371 kB 18%]
                                                            
89% [13 Packages 611 kB/3371 kB 18%]
                                    
99% [Working]
99% [13 Packages store 0 B]
                           
100% [Working]
              
Fetched 21.9 MB in 2s (12.4 MB/s)

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 3%

Reading package lists... 3%

Reading package lists... 4%

Reading package lists... 4%

Reading package lists... 41%

Reading package lists... 41%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 51%

Reading package lists... 51%

Reading package lists... 67%

Reading package lists... 67%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 80%

Reading package lists... 80%

Reading package lists... 96%

Reading package lists... 96%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... Done

↓ 18 lines

ASSISTANT

Show reasoning

Now I need to install all the necessary packages for cross-compiling curl for arm64 with static linking. I need:
1. Cross-compilation toolchain for arm64
2. Build tools (make, autoconf, etc.)
3. Static libraries for: openssl, brotli, zlib, zstd (all for arm64)
4. qemu-user-static for testing

Let me install the necessary packages.

compile-bench> sudo DEBIAN_FRONTEND=noninteractive apt-get install -y gcc-aarch64-linux-gnu g++-aarch64-linux-gnu binutils-aarch64-linux-gnu build-essential autoconf automake libtool pkg-config qemu-user-static

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 3%

Reading package lists... 3%

Reading package lists... 4%

Reading package lists... 4%

Reading package lists... 41%

Reading package lists... 41%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 51%

Reading package lists... 51%

Reading package lists... 67%

Reading package lists... 67%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 80%

Reading package lists... 80%

Reading package lists... 96%

Reading package lists... 96%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... Done


Building dependency tree... 0%

Building dependency tree... 0%

Building dependency tree... 50%

Building dependency tree... 50%

Building dependency tree... Done


Reading state information... 0% 

Reading state information... 1%

Reading state information... Done

build-essential is already the newest version (12.9ubuntu3).
qemu-user-static is already the newest version (1:6.2+dfsg-2ubuntu6.27).
The following additional packages will be installed:
  autotools-dev cpp-11-aarch64-linux-gnu cpp-aarch64-linux-gnu
  g++-11-aarch64-linux-gnu gcc-11-aarch64-linux-gnu
  gcc-11-aarch64-linux-gnu-base gcc-11-cross-base gcc-12-cross-base
  libasan6-arm64-cross libatomic1-arm64-cross libc6-arm64-cross
  libc6-dev-arm64-cross libgcc-11-dev-arm64-cross libgcc-s1-arm64-cross
  libglib2.0-0 libglib2.0-data libgomp1-arm64-cross libhwasan0-arm64-cross
  libicu70 libitm1-arm64-cross liblsan0-arm64-cross libltdl-dev libltdl7
  libsigsegv2 libstdc++-11-dev-arm64-cross libstdc++6-arm64-cross
  libtsan0-arm64-cross libubsan1-arm64-cross libxml2
  linux-libc-dev-arm64-cross m4 shared-mime-info xdg-user-dirs
Suggested packages:
  autoconf-archive gnu-standards autoconf-doc gettext binutils-doc
  gcc-11-locales cpp-doc gcc-11-doc manpages-dev flex bison
  gdb-aarch64-linux-gnu gcc-doc libtool-doc gfortran | fortran95-compiler
  gcj-jdk m4-doc
The following NEW packages will be installed:
  autoconf automake autotools-dev binutils-aarch64-linux-gnu
  cpp-11-aarch64-linux-gnu cpp-aarch64-linux-gnu g++-11-aarch64-linux-gnu
  g++-aarch64-linux-gnu gcc-11-aarch64-linux-gnu gcc-11-aarch64-linux-gnu-base
  gcc-11-cross-base gcc-12-cross-base gcc-aarch64-linux-gnu
  libasan6-arm64-cross libatomic1-arm64-cross libc6-arm64-cross
  libc6-dev-arm64-cross libgcc-11-dev-arm64-cross libgcc-s1-arm64-cross
  libglib2.0-0 libglib2.0-data libgomp1-arm64-cross libhwasan0-arm64-cross
  libicu70 libitm1-arm64-cross liblsan0-arm64-cross libltdl-dev libltdl7
  libsigsegv2 libstdc++-11-dev-arm64-cross libstdc++6-arm64-cross lib
[command output truncated]
 .../39-pkg-config_0.29.2-1ubuntu3_amd64.deb ...
Unpacking pkg-config (0.29.2-1ubuntu3) ...
Setting up gcc-11-aarch64-linux-gnu-base:amd64 (11.4.0-1ubuntu1~22.04cross1) ...
Setting up gcc-12-cross-base (12.3.0-1ubuntu1~22.04cross1) ...
Setting up xdg-user-dirs (0.17-2ubuntu4) ...
Setting up libglib2.0-0:amd64 (2.72.4-0ubuntu2.6) ...
No schema files found: doing nothing.
Setting up binutils-aarch64-linux-gnu (2.38-4ubuntu2.8) ...
Setting up autotools-dev (20220109.1) ...
Setting up libglib2.0-data (2.72.4-0ubuntu2.6) ...
Setting up libsigsegv2:amd64 (2.13-1ubuntu3) ...
Setting up libc6-arm64-cross (2.35-0ubuntu1cross3) ...
Setting up pkg-config (0.29.2-1ubuntu3) ...
Setting up libitm1-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up libltdl7:amd64 (2.4.6-15build2) ...
Setting up linux-libc-dev-arm64-cross (5.15.0-22.22cross3) ...
Setting up cpp-11-aarch64-linux-gnu (11.4.0-1ubuntu1~22.04cross1) ...
Setting up gcc-11-cross-base (11.4.0-1ubuntu1~22.04cross1) ...
Setting up libicu70:amd64 (70.1-2) ...
Setting up libgcc-s1-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up libatomic1-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up liblsan0-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up libgomp1-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up libtool (2.4.6-15build2) ...
Setting up libasan6-arm64-cross (11.4.0-1ubuntu1~22.04cross1) ...
Setting up libtsan0-arm64-cross (11.4.0-1ubuntu1~22.04cross1) ...
Setting up m4 (1.4.18-5ubuntu2) ...
Setting up libhwasan0-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up libc6-dev-arm64-cross (2.35-0ubuntu1cross3) ...
Setting up libstdc++6-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up cpp-aarch64-linux-gnu (4:11.2.0-1ubuntu1) ...
Setting up autoconf (2.71-2) ...
Setting up libxml2:amd64 (2.9.13+dfsg-1ubuntu0.9) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/automake.1.gz because associated file /usr/share/man/man1/automake-1.16.1.gz (of link group automake) doesn't exist
update-alternatives: warning: skip creation of /usr/share/man/man1/aclocal.1.gz because associated file /usr/share/man/man1/aclocal-1.16.1.gz (of link group automake) doesn't exist
Setting up libubsan1-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up libgcc-11-dev-arm64-cross (11.4.0-1ubuntu1~22.04cross1) ...
Setting up libltdl-dev:amd64 (2.4.6-15build2) ...
Setting up shared-mime-info (2.1-2) ...
Setting up gcc-11-aarch64-linux-gnu (11.4.0-1ubuntu1~22.04cross1) ...
Setting up libstdc++-11-dev-arm64-cross (11.4.0-1ubuntu1~22.04cross1) ...
Setting up g++-11-aarch64-linux-gnu (11.4.0-1ubuntu1~22.04cross1) ...
Setting up gcc-aarch64-linux-gnu (4:11.2.0-1ubuntu1) ...
Setting up g++-aarch64-linux-gnu (4:11.2.0-1ubuntu1) ...
Processing triggers for libc-bin (2.35-0ubuntu3.10) ...

↓ 80 lines

ASSISTANT

Show reasoning

Now I need to compile the dependencies (OpenSSL, brotli, zlib, zstd) statically for arm64, then compile curl itself. Let me start by creating directories for the builds.

compile-bench> mkdir -p /home/peter/build /home/peter/result /home/peter/arm64-deps

[empty output]

ASSISTANT

Show reasoning

Now I need to build static libraries for arm64:
1. OpenSSL (for SSL/TLS 1.3 support)
2. brotli
3. zlib
4. zstd

All of these need to be compiled statically for arm64 architecture. Let me start by downloading and building these dependencies.

Let me set up environment variables for cross-compilation:

compile-bench> cd /home/peter/build && wget https://www.openssl.org/source/openssl-3.0.15.tar.gz

--2025-09-29 17:51:22--  https://www.openssl.org/source/openssl-3.0.15.tar.gz
Resolving www.openssl.org (www.openssl.org)... 34.49.79.89, 2600:1901:0:d50b::
Connecting to www.openssl.org (www.openssl.org)|34.49.79.89|:443... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: https://github.com/openssl/openssl/releases/download/openssl-3.0.15/openssl-3.0.15.tar.gz [following]
--2025-09-29 17:51:22--  https://github.com/openssl/openssl/releases/download/openssl-3.0.15/openssl-3.0.15.tar.gz
Resolving github.com (github.com)... 140.82.112.4
Connecting to github.com (github.com)|140.82.112.4|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://release-assets.githubusercontent.com/github-production-release-asset/7634677/3c20ec14-b294-4ab7-9440-8fc93414b244?sp=r&sv=2018-11-09&sr=b&spr=https&se=2025-09-29T18%3A31%3A55Z&rscd=attachment%3B+filename%3Dopenssl-3.0.15.tar.gz&rsct=application%2Foctet-stream&skoid=96c2d410-5711-43a1-aedd-ab1947aa7ab0&sktid=398a6654-997b-47e9-b12b-9515b896b4de&skt=2025-09-29T17%3A31%3A43Z&ske=2025-09-29T18%3A31%3A55Z&sks=b&skv=2018-11-09&sig=5l69Vwu8HBuOpct%2Bfq%2BZuWATpm4JIG5Ak27%2BbD1qFPo%3D&jwt=eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJpc3MiOiJnaXRodWIuY29tIiwiYXVkIjoicmVsZWFzZS1hc3NldHMuZ2l0aHVidXNlcmNvbnRlbnQuY29tIiwia2V5Ijoia2V5MSIsImV4cCI6MTc1OTE2ODU4MiwibmJmIjoxNzU5MTY4MjgyLCJwYXRoIjoicmVsZWFzZWFzc2V0cHJvZHVjdGlvbi5ibG9iLmNvcmUud2luZG93cy5uZXQifQ.SIjcdm8aVhwlmrq7Y3nPEflF2ZK4HL80thB9zQnFDek&response-content-disposition=attachment%3B%20filename%3Dopenssl-3.0.15.tar.gz&response-content-type=application%2Foctet-stream [following]
--2025-09-29 17:51:22--  https://release-assets.githubusercontent.com/github-production-release-asset/7634677/3c20ec14-b294-4ab7-9440-8fc93414b244?sp=r&sv=2018-11-09&sr=b&spr=https&se=2025-09-29T18%3A31%3A55Z&rscd=attachment%3B+filename%3Dopenssl-3.0.15.tar.gz&rsct=application%2Foctet-stream&skoid=96c2d410-5711-43a1-aedd-ab1947aa7ab0&sktid=398a6654-997b-47e9-b12b-9515b896b4de&skt=2025-09-29T17%3A31%3A43Z&ske=2025-09-29T18%3A31%3A55Z&sks=b&skv=2018-11-09&sig=5l69Vwu8HBuOpct%2Bfq%2BZuWATpm4JIG5Ak27%2BbD1qFPo%3D&jwt=eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJpc3MiOiJnaXRodWIuY29tIiwiYXVkIjoicmVsZWFzZS1hc3NldHMuZ2l0aHVidXNlcmNvbnRlbnQuY29tIiwia2V5Ijoia2V5MSIsImV4cCI6MTc1OTE2ODU4MiwibmJmIjoxNzU5MTY4MjgyLCJwYXRoIjoicmVsZWFzZWFzc2V0cHJvZHVjdGlvbi5ibG9iLmNvcmUud2luZG93cy5uZXQifQ.SIjcdm8aVhwlmrq7Y3nPEflF2ZK4HL80thB9zQnFDek&response-content-disposition=attachment%3B%20filename%3Dopenssl-3.0.15.tar.gz&response-content-type=application%2Foctet-stream
Resolving release-assets.githubusercontent.com (release-assets.githubusercontent.com)... 185.199.111.133, 185.199.110.133, 185.199.109.133, ...
Connecting to release-assets.githubusercontent.com (release-assets.githubusercontent.com)|185.199.111.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 15318633 (15M) [application/octet-stream]
Saving to: 'openssl-3.0.15.tar.gz'


openssl-3.0.15.tar.   0%[                    ]       0  --.-KB/s               
openssl-3.0.15.tar. 100%[===================>]  14.61M  --.-KB/s    in 0.04s   

2025-09-29 17:51:22 (417 MB/s) - 'openssl-3.0.15.tar.gz' saved [15318633/15318633]

↓ 21 lines

ASSISTANT

Show reasoning

Good, I have OpenSSL downloaded. Now I need to:
1. Download and build zlib, brotli, zstd as static libraries for arm64
2. Build OpenSSL as a static library for arm64
3. Build curl statically linked against all these dependencies
4. Test with qemu-aarch64-static

Let me continue downloading the dependencies.

compile-bench> cd /home/peter/build && wget https://github.com/madler/zlib/releases/download/v1.3.1/zlib-1.3.1.tar.gz

--2025-09-29 17:51:27--  https://github.com/madler/zlib/releases/download/v1.3.1/zlib-1.3.1.tar.gz
Resolving github.com (github.com)... 140.82.112.4
Connecting to github.com (github.com)|140.82.112.4|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://release-assets.githubusercontent.com/github-production-release-asset/2359378/eb5e982f-74dc-4279-8d04-e2f5d43ae3b5?sp=r&sv=2018-11-09&sr=b&spr=https&se=2025-09-29T18%3A31%3A45Z&rscd=attachment%3B+filename%3Dzlib-1.3.1.tar.gz&rsct=application%2Foctet-stream&skoid=96c2d410-5711-43a1-aedd-ab1947aa7ab0&sktid=398a6654-997b-47e9-b12b-9515b896b4de&skt=2025-09-29T17%3A31%3A22Z&ske=2025-09-29T18%3A31%3A45Z&sks=b&skv=2018-11-09&sig=pQu6acb5%2BAIQy63UtV7c5N8MH%2FrKSG0FSQlGlB1lSVI%3D&jwt=eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJpc3MiOiJnaXRodWIuY29tIiwiYXVkIjoicmVsZWFzZS1hc3NldHMuZ2l0aHVidXNlcmNvbnRlbnQuY29tIiwia2V5Ijoia2V5MSIsImV4cCI6MTc1OTE2ODU4NywibmJmIjoxNzU5MTY4Mjg3LCJwYXRoIjoicmVsZWFzZWFzc2V0cHJvZHVjdGlvbi5ibG9iLmNvcmUud2luZG93cy5uZXQifQ.rfoggLZQLKwi7X_d0s6KY7c3OpFfJWcdd9abs-sf0wo&response-content-disposition=attachment%3B%20filename%3Dzlib-1.3.1.tar.gz&response-content-type=application%2Foctet-stream [following]
--2025-09-29 17:51:27--  https://release-assets.githubusercontent.com/github-production-release-asset/2359378/eb5e982f-74dc-4279-8d04-e2f5d43ae3b5?sp=r&sv=2018-11-09&sr=b&spr=https&se=2025-09-29T18%3A31%3A45Z&rscd=attachment%3B+filename%3Dzlib-1.3.1.tar.gz&rsct=application%2Foctet-stream&skoid=96c2d410-5711-43a1-aedd-ab1947aa7ab0&sktid=398a6654-997b-47e9-b12b-9515b896b4de&skt=2025-09-29T17%3A31%3A22Z&ske=2025-09-29T18%3A31%3A45Z&sks=b&skv=2018-11-09&sig=pQu6acb5%2BAIQy63UtV7c5N8MH%2FrKSG0FSQlGlB1lSVI%3D&jwt=eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJpc3MiOiJnaXRodWIuY29tIiwiYXVkIjoicmVsZWFzZS1hc3NldHMuZ2l0aHVidXNlcmNvbnRlbnQuY29tIiwia2V5Ijoia2V5MSIsImV4cCI6MTc1OTE2ODU4NywibmJmIjoxNzU5MTY4Mjg3LCJwYXRoIjoicmVsZWFzZWFzc2V0cHJvZHVjdGlvbi5ibG9iLmNvcmUud2luZG93cy5uZXQifQ.rfoggLZQLKwi7X_d0s6KY7c3OpFfJWcdd9abs-sf0wo&response-content-disposition=attachment%3B%20filename%3Dzlib-1.3.1.tar.gz&response-content-type=application%2Foctet-stream
Resolving release-assets.githubusercontent.com (release-assets.githubusercontent.com)... 185.199.108.133, 185.199.111.133, 185.199.110.133, ...
Connecting to release-assets.githubusercontent.com (release-assets.githubusercontent.com)|185.199.108.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1512791 (1.4M) [application/octet-stream]
Saving to: 'zlib-1.3.1.tar.gz'


zlib-1.3.1.tar.gz     0%[                    ]       0  --.-KB/s               
zlib-1.3.1.tar.gz   100%[===================>]   1.44M  --.-KB/s    in 0.006s  

2025-09-29 17:51:27 (260 MB/s) - 'zlib-1.3.1.tar.gz' saved [1512791/1512791]

↓ 16 lines

ASSISTANT

Show reasoning

Let me continue downloading the remaining dependencies (brotli and zstd), then build them all statically for arm64.

compile-bench> cd /home/peter/build && wget https://github.com/google/brotli/archive/refs/tags/v1.1.0.tar.gz -O brotli-1.1.0.tar.gz

--2025-09-29 17:51:31--  https://github.com/google/brotli/archive/refs/tags/v1.1.0.tar.gz
Resolving github.com (github.com)... 140.82.112.4
Connecting to github.com (github.com)|140.82.112.4|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://codeload.github.com/google/brotli/tar.gz/refs/tags/v1.1.0 [following]
--2025-09-29 17:51:31--  https://codeload.github.com/google/brotli/tar.gz/refs/tags/v1.1.0
Resolving codeload.github.com (codeload.github.com)... 140.82.112.10
Connecting to codeload.github.com (codeload.github.com)|140.82.112.10|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 511969 (500K) [application/x-gzip]
Saving to: 'brotli-1.1.0.tar.gz'


brotli-1.1.0.tar.gz   0%[                    ]       0  --.-KB/s               
brotli-1.1.0.tar.gz 100%[===================>] 499.97K  --.-KB/s    in 0.06s   

2025-09-29 17:51:31 (8.43 MB/s) - 'brotli-1.1.0.tar.gz' saved [511969/511969]

↓ 16 lines

ASSISTANT

Show reasoning

Now I need to download zstd as well.

compile-bench> cd /home/peter/build && wget https://github.com/facebook/zstd/releases/download/v1.5.6/zstd-1.5.6.tar.gz

--2025-09-29 17:51:33--  https://github.com/facebook/zstd/releases/download/v1.5.6/zstd-1.5.6.tar.gz
Resolving github.com (github.com)... 140.82.112.4
Connecting to github.com (github.com)|140.82.112.4|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://release-assets.githubusercontent.com/github-production-release-asset/29759715/5a6a726c-abce-4c08-8237-428805ddec52?sp=r&sv=2018-11-09&sr=b&spr=https&se=2025-09-29T18%3A33%3A16Z&rscd=attachment%3B+filename%3Dzstd-1.5.6.tar.gz&rsct=application%2Foctet-stream&skoid=96c2d410-5711-43a1-aedd-ab1947aa7ab0&sktid=398a6654-997b-47e9-b12b-9515b896b4de&skt=2025-09-29T17%3A32%3A30Z&ske=2025-09-29T18%3A33%3A16Z&sks=b&skv=2018-11-09&sig=US%2BjaNv%2FpLj1ay4Z5vHR1kvSAQta8m3ATaHapQtq1CU%3D&jwt=eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJpc3MiOiJnaXRodWIuY29tIiwiYXVkIjoicmVsZWFzZS1hc3NldHMuZ2l0aHVidXNlcmNvbnRlbnQuY29tIiwia2V5Ijoia2V5MSIsImV4cCI6MTc1OTE2ODUyNSwibmJmIjoxNzU5MTY4MjI1LCJwYXRoIjoicmVsZWFzZWFzc2V0cHJvZHVjdGlvbi5ibG9iLmNvcmUud2luZG93cy5uZXQifQ.2qLRid8G_R-07W6cPv7EwsF53adKlGtNr75mMK5GDH4&response-content-disposition=attachment%3B%20filename%3Dzstd-1.5.6.tar.gz&response-content-type=application%2Foctet-stream [following]
--2025-09-29 17:51:33--  https://release-assets.githubusercontent.com/github-production-release-asset/29759715/5a6a726c-abce-4c08-8237-428805ddec52?sp=r&sv=2018-11-09&sr=b&spr=https&se=2025-09-29T18%3A33%3A16Z&rscd=attachment%3B+filename%3Dzstd-1.5.6.tar.gz&rsct=application%2Foctet-stream&skoid=96c2d410-5711-43a1-aedd-ab1947aa7ab0&sktid=398a6654-997b-47e9-b12b-9515b896b4de&skt=2025-09-29T17%3A32%3A30Z&ske=2025-09-29T18%3A33%3A16Z&sks=b&skv=2018-11-09&sig=US%2BjaNv%2FpLj1ay4Z5vHR1kvSAQta8m3ATaHapQtq1CU%3D&jwt=eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJpc3MiOiJnaXRodWIuY29tIiwiYXVkIjoicmVsZWFzZS1hc3NldHMuZ2l0aHVidXNlcmNvbnRlbnQuY29tIiwia2V5Ijoia2V5MSIsImV4cCI6MTc1OTE2ODUyNSwibmJmIjoxNzU5MTY4MjI1LCJwYXRoIjoicmVsZWFzZWFzc2V0cHJvZHVjdGlvbi5ibG9iLmNvcmUud2luZG93cy5uZXQifQ.2qLRid8G_R-07W6cPv7EwsF53adKlGtNr75mMK5GDH4&response-content-disposition=attachment%3B%20filename%3Dzstd-1.5.6.tar.gz&response-content-type=application%2Foctet-stream
Resolving release-assets.githubusercontent.com (release-assets.githubusercontent.com)... 185.199.109.133, 185.199.108.133, 185.199.111.133, ...
Connecting to release-assets.githubusercontent.com (release-assets.githubusercontent.com)|185.199.109.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 2406875 (2.3M) [application/octet-stream]
Saving to: 'zstd-1.5.6.tar.gz'


zstd-1.5.6.tar.gz     0%[                    ]       0  --.-KB/s               
zstd-1.5.6.tar.gz   100%[===================>]   2.29M  --.-KB/s    in 0.02s   

2025-09-29 17:51:33 (94.0 MB/s) - 'zstd-1.5.6.tar.gz' saved [2406875/2406875]

↓ 16 lines

ASSISTANT

Show reasoning

Now I need to extract all these archives and build them statically for arm64. Let me start by extracting them.

compile-bench> cd /home/peter/build && tar -xzf openssl-3.0.15.tar.gz && tar -xzf zlib-1.3.1.tar.gz && tar -xzf brotli-1.1.0.tar.gz && tar -xzf zstd-1.5.6.tar.gz && ls -la

total 19316
drwxr-xr-x  6 peter peter     4096 Sep 29 17:51 .
drwxr-x---  1 peter peter     4096 Sep 29 17:51 ..
drwxr-xr-x  7 peter peter     4096 Aug 29  2023 brotli-1.1.0
-rw-r--r--  1 peter peter   511969 Sep 29 17:51 brotli-1.1.0.tar.gz
drwxr-xr-x 20 peter peter     4096 Sep  3  2024 openssl-3.0.15
-rw-r--r--  1 peter peter 15318633 Sep  3  2024 openssl-3.0.15.tar.gz
drwxr-xr-x 14 peter peter     4096 Jan 22  2024 zlib-1.3.1
-rw-r--r--  1 peter peter  1512791 Jan 22  2024 zlib-1.3.1.tar.gz
drwxr-xr-x 12 peter peter     4096 Mar 21  2024 zstd-1.5.6
-rw-r--r--  1 peter peter  2406875 Mar 27  2024 zstd-1.5.6.tar.gz

↓ 12 lines

ASSISTANT

Show reasoning

Now I need to build all the dependencies statically for arm64 (aarch64), then build curl with those dependencies. Let me start with zlib.

The process will be:
1. Build zlib statically for arm64
2. Build OpenSSL statically for arm64 (with TLS 1.3 support)
3. Build brotli statically for arm64
4. Build zstd statically for arm64
5. Build curl statically for arm64 with all these dependencies
6. Create symlink and test with qemu

Let me start with zlib first.

compile-bench> cd /home/peter/build/zlib-1.3.1 && CC=aarch64-linux-gnu-gcc AR=aarch64-linux-gnu-ar RANLIB=aarch64-linux-gnu-ranlib ./configure --prefix=/home/peter/arm64-deps --static

Building static library libz.a version 1.3.1 with aarch64-linux-gnu-gcc.
Checking for size_t... Yes.
Checking for off64_t... Yes.
Checking for fseeko... Yes.
Checking for strerror... Yes.
Checking for unistd.h... Yes.
Checking for stdarg.h... Yes.
Checking whether to use vs[n]printf() or s[n]printf()... using vs[n]printf().
Checking for vsnprintf() in stdio.h... Yes.
Checking for return value of vsnprintf()... Yes.
Checking for attribute(visibility) support... Yes.

↓ 12 lines

ASSISTANT

Show reasoning

Good, zlib is configured. Now let me build and install it.

compile-bench> cd /home/peter/build/zlib-1.3.1 && make -j$(nproc) && make install

aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -I. -c -o example.o test/example.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o adler32.o adler32.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o crc32.o crc32.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o deflate.o deflate.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o infback.o infback.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o inffast.o inffast.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o inflate.o inflate.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o inftrees.o inftrees.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o trees.o trees.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o zutil.o zutil.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o compress.o compress.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o uncompr.o uncompr.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o gzclose.o gzclose.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o gzlib.o gzlib.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o gzread.o gzread.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o gzwrite.o gzwrite.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -I. -c -o minigzip.o test/minigzip.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -I. -D_FILE_OFFSET_BITS=64 -c -o example64.o test/example.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -I. -D_FILE_OFFSET_BITS=64 -c -o minigzip64.o test/minigzip.c
aarch64-linux-gnu-ar rc libz.a adler32.o crc32.o deflate.o infback.o inffast.o inflate.o inftrees.o trees.o zutil.o compress.o uncompr.o gzclose.o gzlib.o gzread.o gzwrite.o 
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -o example example.o -L. libz.a
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -o minigzip minigzip.o -L. libz.a
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -o example64 example64.o -L. libz.a
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -o minigzip64 minigzip64.o -L. libz.a
rm -f /home/peter/arm64-deps/lib/libz.a
cp libz.a /home/peter/arm64-deps/lib
chmod 644 /home/peter/arm64-deps/lib/libz.a
rm -f /home/peter/arm64-deps/share/man/man3/zlib.3
cp zlib.3 /home/peter/arm64-deps/share/man/man3
chmod 644 /home/peter/arm64-deps/share/man/man3/zlib.3
rm -f /home/peter/arm64-deps/lib/pkgconfig/zlib.pc
cp zlib.pc /home/peter/arm64-deps/lib/pkgconfig
chmod 644 /home/peter/arm64-deps/lib/pkgconfig/zlib.pc
rm -f /home/peter/arm64-deps/include/zlib.h /home/peter/arm64-deps/include/zconf.h
cp zlib.h zconf.h /home/peter/arm64-deps/include
chmod 644 /home/peter/arm64-deps/include/zlib.h /home/peter/arm64-deps/include/zconf.h

↓ 37 lines

ASSISTANT

Show reasoning

Good, zlib is compiled for arm64. Now let's compile OpenSSL for arm64.

compile-bench> cd /home/peter/build/openssl-3.0.15 && ./Configure linux-aarch64 --prefix=/home/peter/arm64-deps --openssldir=/home/peter/arm64-deps/ssl no-shared no-tests --cross-compile-prefix=aarch64-linux-gnu-

Configuring OpenSSL version 3.0.15 for target linux-aarch64
Using os-specific seed configuration
Created configdata.pm
Running configdata.pm
Created Makefile.in
Created Makefile
Created include/openssl/configuration.h

**********************************************************************
***                                                                ***
***   OpenSSL has been successfully configured                     ***
***                                                                ***
***   If you encounter a problem while building, please open an    ***
***   issue on GitHub <https://github.com/openssl/openssl/issues>  ***
***   and include the output from the following command:           ***
***                                                                ***
***       perl configdata.pm --dump                                ***
***                                                                ***
***   (If you are new to OpenSSL, you might want to consult the    ***
***   'Troubleshooting' section in the INSTALL.md file first)      ***
***                                                                ***
**********************************************************************

↓ 23 lines

ASSISTANT

Show reasoning

Good, OpenSSL is configured. Now I need to build and install it.

compile-bench> cd /home/peter/build/openssl-3.0.15 && make -j$(nproc)

/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/crypto/bn_conf.h.in > include/crypto/bn_conf.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/crypto/dso_conf.h.in > include/crypto/dso_conf.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/asn1.h.in > include/openssl/asn1.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/asn1t.h.in > include/openssl/asn1t.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/bio.h.in > include/openssl/bio.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/cmp.h.in > include/openssl/cmp.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/cms.h.in > include/openssl/cms.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/conf.h.in > include/openssl/conf.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/crmf.h.in > include/openssl/crmf.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/crypto.h.in > include/openssl/crypto.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/ct.h.in > include/openssl/ct.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/err.h.in > include/openssl/err.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/ess.h.in > include/openssl/ess.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/fipskey.h.in > include/openssl/fipskey.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/lhash.h.in > include/openssl/lhash.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/ocsp.h.in > include/openssl/ocsp.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/opensslv.h.in > include/openssl/opensslv.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/pkcs12.h.in > include/openssl/pkcs12.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/pkcs7.h.in > include/openssl/pkcs7.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/safestack.h.in > include/openssl/safestack.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/srp.h.in > include/openssl/srp.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/ssl.h.in > include/openssl/ssl.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/ui.h.in > include/openssl/ui.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/x509.h.in > include/openssl/x509.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/x509_vfy.h.in > include/openssl/x509_vfy.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/x509v3.h.in 
[command output truncated]
mmon/der/libcommon-lib-der_ecx_gen.o providers/common/der/libcommon-lib-der_ecx_key.o providers/common/der/libcommon-lib-der_rsa_gen.o providers/common/der/libcommon-lib-der_rsa_key.o providers/common/der/libcommon-lib-der_wrap_gen.o providers/common/libcommon-lib-provider_ctx.o providers/common/libcommon-lib-provider_err.o providers/implementations/ciphers/libcommon-lib-ciphercommon.o providers/implementations/ciphers/libcommon-lib-ciphercommon_block.o providers/implementations/ciphers/libcommon-lib-ciphercommon_ccm.o providers/implementations/ciphers/libcommon-lib-ciphercommon_ccm_hw.o providers/implementations/ciphers/libcommon-lib-ciphercommon_gcm.o providers/implementations/ciphers/libcommon-lib-ciphercommon_gcm_hw.o providers/implementations/ciphers/libcommon-lib-ciphercommon_hw.o providers/implementations/digests/libcommon-lib-digestcommon.o ssl/record/libcommon-lib-tls_pad.o
aarch64-linux-gnu-ranlib libcrypto.a || echo Never mind.
aarch64-linux-gnu-gcc -fPIC -pthread -Wa,--noexecstack -Wall -O3 -L. -Wl,-z,defs -Wl,-znodelete -shared -Wl,-Bsymbolic   \
	-o providers/legacy.so -Wl,--version-script=providers/legacy.ld \
	providers/legacy-dso-legacyprov.o \
	providers/liblegacy.a providers/libcommon.a -lcrypto -ldl -pthread 
rm -f apps/openssl
${LDCMD:-aarch64-linux-gnu-gcc} -pthread -Wa,--noexecstack -Wall -O3 -L.   \
	-o apps/openssl \
	apps/lib/openssl-bin-cmp_mock_srv.o \
	apps/openssl-bin-asn1parse.o apps/openssl-bin-ca.o \
	apps/openssl-bin-ciphers.o apps/openssl-bin-cmp.o \
	apps/openssl-bin-cms.o apps/openssl-bin-crl.o \
	apps/openssl-bin-crl2pkcs7.o apps/openssl-bin-dgst.o \
	apps/openssl-bin-dhparam.o apps/openssl-bin-dsa.o \
	apps/openssl-bin-dsaparam.o apps/openssl-bin-ec.o \
	apps/openssl-bin-ecparam.o apps/openssl-bin-enc.o \
	apps/openssl-bin-engine.o apps/openssl-bin-errstr.o \
	apps/openssl-bin-fipsinstall.o apps/openssl-bin-gendsa.o \
	apps/openssl-bin-genpkey.o apps/openssl-bin-genrsa.o \
	apps/openssl-bin-info.o apps/openssl-bin-kdf.o \
	apps/openssl-bin-list.o apps/openssl-bin-mac.o \
	apps/openssl-bin-nseq.o apps/openssl-bin-ocsp.o \
	apps/openssl-bin-openssl.o apps/openssl-bin-passwd.o \
	apps/openssl-bin-pkcs12.o apps/openssl-bin-pkcs7.o \
	apps/openssl-bin-pkcs8.o apps/openssl-bin-pkey.o \
	apps/openssl-bin-pkeyparam.o apps/openssl-bin-pkeyutl.o \
	apps/openssl-bin-prime.o apps/openssl-bin-progs.o \
	apps/openssl-bin-rand.o apps/openssl-bin-rehash.o \
	apps/openssl-bin-req.o apps/openssl-bin-rsa.o \
	apps/openssl-bin-rsautl.o apps/openssl-bin-s_client.o \
	apps/openssl-bin-s_server.o apps/openssl-bin-s_time.o \
	apps/openssl-bin-sess_id.o apps/openssl-bin-smime.o \
	apps/openssl-bin-speed.o apps/openssl-bin-spkac.o \
	apps/openssl-bin-srp.o apps/openssl-bin-storeutl.o \
	apps/openssl-bin-ts.o apps/openssl-bin-verify.o \
	apps/openssl-bin-version.o apps/openssl-bin-x509.o \
	apps/libapps.a -lssl -lcrypto -ldl -pthread 
make[1]: Leaving directory '/home/peter/build/openssl-3.0.15'

↓ 67 lines

ASSISTANT

Show reasoning

Good, OpenSSL built successfully. Now I need to install it.

compile-bench> cd /home/peter/build/openssl-3.0.15 && make install

"make" depend && "make" _build_libs
make[1]: Entering directory '/home/peter/build/openssl-3.0.15'
make[1]: Leaving directory '/home/peter/build/openssl-3.0.15'
make[1]: Entering directory '/home/peter/build/openssl-3.0.15'
make[1]: Leaving directory '/home/peter/build/openssl-3.0.15'
*** Installing runtime libraries
*** Installing development files
created directory `/home/peter/arm64-deps/include/openssl'
install ./include/openssl/aes.h -> /home/peter/arm64-deps/include/openssl/aes.h
install ./include/openssl/asn1.h -> /home/peter/arm64-deps/include/openssl/asn1.h
install ./include/openssl/asn1_mac.h -> /home/peter/arm64-deps/include/openssl/asn1_mac.h
install ./include/openssl/asn1err.h -> /home/peter/arm64-deps/include/openssl/asn1err.h
install ./include/openssl/asn1t.h -> /home/peter/arm64-deps/include/openssl/asn1t.h
install ./include/openssl/async.h -> /home/peter/arm64-deps/include/openssl/async.h
install ./include/openssl/asyncerr.h -> /home/peter/arm64-deps/include/openssl/asyncerr.h
install ./include/openssl/bio.h -> /home/peter/arm64-deps/include/openssl/bio.h
install ./include/openssl/bioerr.h -> /home/peter/arm64-deps/include/openssl/bioerr.h
install ./include/openssl/blowfish.h -> /home/peter/arm64-deps/include/openssl/blowfish.h
install ./include/openssl/bn.h -> /home/peter/arm64-deps/include/openssl/bn.h
install ./include/openssl/bnerr.h -> /home/peter/arm64-deps/include/openssl/bnerr.h
install ./include/openssl/buffer.h -> /home/peter/arm64-deps/include/openssl/buffer.h
install ./include/openssl/buffererr.h -> /home/peter/arm64-deps/include/openssl/buffererr.h
install ./include/openssl/camellia.h -> /home/peter/arm64-deps/include/openssl/camellia.h
install ./include/openssl/cast.h -> /home/peter/arm64-deps/include/openssl/cast.h
install ./include/openssl/cmac.h -> /home/peter/arm64-deps/include/openssl/cmac.h
install ./include/openssl/cmp.h -> /home/peter/arm64-deps/include/openssl/cmp.h
install ./include/openssl/cmp_util.h -> /home/peter/arm64-deps/include/openssl/cmp_util.h
install ./include/openssl/cmperr.h -> /home/peter/arm64-deps/include/openssl/cmperr.h
install ./include/openssl/cms.h -> /home/peter/arm64-deps/include/openssl/cms.h
install ./include/openssl/cmserr.h -> /home/peter/arm64-deps/include/openssl/cmserr.h
install ./include/openssl/comp.h -> /home/peter/arm64-deps/include/openssl/comp.h
install ./include/openssl/comperr.h -> /home/peter/arm64-deps/include/openssl/comperr.h
install ./include/openssl/conf.h -> /home/peter/arm64-deps/include/openssl/conf.h
install ./include/openssl/conf_api.h -> /home/peter/arm64-deps/include/openssl/conf_api.h
install ./include/openssl/conferr.h -> /home/peter/arm64-deps/include/openssl/conferr.h
install ./include/openssl/configuration.h -> /home/peter/arm64-deps/include/openssl/configuration.h
install ./include/openssl/conftypes.h -> /home/peter/arm64-deps/include/openssl/conftypes.h
install ./include/openssl/core.h -> /home/peter/arm64-deps/i
[command output truncated]
.html -> /home/peter/arm64-deps/share/doc/openssl/html/man7/openssl-glossary.html
install doc/html/man7/openssl-threads.html -> /home/peter/arm64-deps/share/doc/openssl/html/man7/openssl-threads.html
install doc/html/man7/openssl_user_macros.html -> /home/peter/arm64-deps/share/doc/openssl/html/man7/openssl_user_macros.html
install doc/html/man7/ossl_store-file.html -> /home/peter/arm64-deps/share/doc/openssl/html/man7/ossl_store-file.html
install doc/html/man7/ossl_store.html -> /home/peter/arm64-deps/share/doc/openssl/html/man7/ossl_store.html
install doc/html/man7/passphrase-encoding.html -> /home/peter/arm64-deps/share/doc/openssl/html/man7/passphrase-encoding.html
install doc/html/man7/property.html -> /home/peter/arm64-deps/share/doc/openssl/html/man7/property.html
install doc/html/man7/provider-asym_cipher.html -> /home/peter/arm64-deps/share/doc/openssl/html/man7/provider-asym_cipher.html
install doc/html/man7/provider-base.html -> /home/peter/arm64-deps/share/doc/openssl/html/man7/provider-base.html
install doc/html/man7/provider-cipher.html -> /home/peter/arm64-deps/share/doc/openssl/html/man7/provider-cipher.html
install doc/html/man7/provider-decoder.html -> /home/peter/arm64-deps/share/doc/openssl/html/man7/provider-decoder.html
install doc/html/man7/provider-digest.html -> /home/peter/arm64-deps/share/doc/openssl/html/man7/provider-digest.html
install doc/html/man7/provider-encoder.html -> /home/peter/arm64-deps/share/doc/openssl/html/man7/provider-encoder.html
install doc/html/man7/provider-kdf.html -> /home/peter/arm64-deps/share/doc/openssl/html/man7/provider-kdf.html
install doc/html/man7/provider-kem.html -> /home/peter/arm64-deps/share/doc/openssl/html/man7/provider-kem.html
install doc/html/man7/provider-keyexch.html -> /home/peter/arm64-deps/share/doc/openssl/html/man7/provider-keyexch.html
install doc/html/man7/provider-keymgmt.html -> /home/peter/arm64-deps/share/doc/openssl/html/man7/provider-keymgmt.html
install doc/html/man7/provider-mac.html -> /home/peter/arm64-deps/share/doc/openssl/html/man7/provider-mac.html
install doc/html/man7/provider-object.html -> /home/peter/arm64-deps/share/doc/openssl/html/man7/provider-object.html
install doc/html/man7/provider-rand.html -> /home/peter/arm64-deps/share/doc/openssl/html/man7/provider-rand.html
install doc/html/man7/provider-signature.html -> /home/peter/arm64-deps/share/doc/openssl/html/man7/provider-signature.html
install doc/html/man7/provider-storemgmt.html -> /home/peter/arm64-deps/share/doc/openssl/html/man7/provider-storemgmt.html
install doc/html/man7/provider.html -> /home/peter/arm64-deps/share/doc/openssl/html/man7/provider.html
install doc/html/man7/proxy-certificates.html -> /home/peter/arm64-deps/share/doc/openssl/html/man7/proxy-certificates.html
install doc/html/man7/ssl.html -> /home/peter/arm64-deps/share/doc/openssl/html/man7/ssl.html
install doc/html/man7/x509.html -> /home/peter/arm64-deps/share/doc/openssl/html/man7/x509.html

↓ 66 lines

ASSISTANT

Show reasoning

Good, OpenSSL is installed. Now let's build brotli. Brotli uses CMake, so I'll need to install cmake and use it to cross-compile for aarch64.

compile-bench> sudo DEBIAN_FRONTEND=noninteractive apt-get install -y cmake

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 3%

Reading package lists... 3%

Reading package lists... 4%

Reading package lists... 4%

Reading package lists... 41%

Reading package lists... 41%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 51%

Reading package lists... 51%

Reading package lists... 67%

Reading package lists... 67%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 80%

Reading package lists... 80%

Reading package lists... 96%

Reading package lists... 96%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... Done


Building dependency tree... 0%

Building dependency tree... 0%

Building dependency tree... 50%

Building dependency tree... 50%

Building dependency tree... 99%

Building dependency tree... Done


Reading state information... 0% 

Reading state information... 1%

Reading state information... Done

The following additional packages will be installed:
  cmake-data dh-elpa-helper emacsen-common libarchive13 libexpat1 libjsoncpp25
  librhash0 libuv1
Suggested packages:
  cmake-doc ninja-build cmake-format lrzip
The following NEW packages will be installed:
  cmake cmake-data dh-elpa-helper emacsen-common libarchive13 libexpat1
  libjsoncpp25 librhash0 libuv1
0 upgraded, 9 newly installed, 0 to remove and 10 not upgraded.
Need to get 7703 kB of archives.
After this operation, 33.5 MB of additional disk space will be used.

0% [Working]
            
Get:1 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libexpat1 amd64 2.4.7-1ubuntu0.6 [92.1 kB]

0% [1 libexpat1 14.2 kB/92.1 kB 15%]
                                    
3% [Working]
            
Get:2 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libuv1 amd64 1.43.0-1ubuntu0.1 [92.7 kB]

3% [2 libuv1 5501 B/92.7 kB 6%]
                               
Get:3 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libarchive13 amd64 3.6.0-1ubuntu1.5 [368 kB]

6% [3 libarchive13 2277 B/368 kB 1%]
                                    
12% [Waiting for headers]
                         
Get:4 http://archive.ubuntu.com/ubuntu jammy/main amd64 libjsoncpp25 amd64 1.9.5-3 [80.0 kB]

12% [4 libjsoncpp25 7909 B/80.0 kB 10%]
                                       
15% [Waiting for headers]
                         
Get:5 http://archive.ubuntu.com/ubuntu jammy/main amd64 librhash0 amd64 1.4.2-1ubuntu1 [125 kB]

16% [5 librhash0 7990 B/125 kB 6%]
                                  
19% [Waiting for headers]
                         
Get:6 http://archive.ubuntu.com/ubuntu jammy/main amd64 dh-elpa-helper all 2.0.9ubuntu1 [7610 B]

19% [6 dh-
[command output truncated]
  
Get:9 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 cmake amd64 3.22.1-1ubuntu1.22.04.2 [5010 kB]

                                 
46% [9 cmake 16.4 kB/5010 kB 0%]
                                
100% [Working]
              
Fetched 7703 kB in 0s (23.3 MB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package libexpat1:amd64.
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 14516 files and directories currently installed.)
Preparing to unpack .../0-libexpat1_2.4.7-1ubuntu0.6_amd64.deb ...
Unpacking libexpat1:amd64 (2.4.7-1ubuntu0.6) ...
Selecting previously unselected package libuv1:amd64.
Preparing to unpack .../1-libuv1_1.43.0-1ubuntu0.1_amd64.deb ...
Unpacking libuv1:amd64 (1.43.0-1ubuntu0.1) ...
Selecting previously unselected package libarchive13:amd64.
Preparing to unpack .../2-libarchive13_3.6.0-1ubuntu1.5_amd64.deb ...
Unpacking libarchive13:amd64 (3.6.0-1ubuntu1.5) ...
Selecting previously unselected package libjsoncpp25:amd64.
Preparing to unpack .../3-libjsoncpp25_1.9.5-3_amd64.deb ...
Unpacking libjsoncpp25:amd64 (1.9.5-3) ...
Selecting previously unselected package librhash0:amd64.
Preparing to unpack .../4-librhash0_1.4.2-1ubuntu1_amd64.deb ...
Unpacking librhash0:amd64 (1.4.2-1ubuntu1) ...
Selecting previously unselected package dh-elpa-helper.
Preparing to unpack .../5-dh-elpa-helper_2.0.9ubuntu1_all.deb ...
Unpacking dh-elpa-helper (2.0.9ubuntu1) ...
Selecting previously unselected package emacsen-common.
Preparing to unpack .../6-emacsen-common_3.0.4_all.deb ...
Unpacking emacsen-common (3.0.4) ...
Selecting previously unselected package cmake-data.
Preparing to unpack .../7-cmake-data_3.22.1-1ubuntu1.22.04.2_all.deb ...
Unpacking cmake-data (3.22.1-1ubuntu1.22.04.2) ...
Selecting previously unselected package cmake.
Preparing to unpack .../8-cmake_3.22.1-1ubuntu1.22.04.2_amd64.deb ...
Unpacking cmake (3.22.1-1ubuntu1.22.04.2) ...
Setting up libexpat1:amd64 (2.4.7-1ubuntu0.6) ...
Setting up libarchive13:amd64 (3.6.0-1ubuntu1.5) ...
Setting up libuv1:amd64 (1.43.0-1ubuntu0.1) ...
Setting up emacsen-common (3.0.4) ...
Setting up dh-elpa-helper (2.0.9ubuntu1) ...
Setting up libjsoncpp25:amd64 (1.9.5-3) ...
Setting up librhash0:amd64 (1.4.2-1ubuntu1) ...
Setting up cmake-data (3.22.1-1ubuntu1.22.04.2) ...
Setting up cmake (3.22.1-1ubuntu1.22.04.2) ...
Processing triggers for libc-bin (2.35-0ubuntu3.10) ...

↓ 64 lines

ASSISTANT

Show reasoning

Now I need to build brotli. Brotli uses CMake, so I'll need to use CMake with the cross-compiler toolchain.

compile-bench> cd /home/peter/build/brotli-1.1.0 && mkdir build && cd build && cmake -DCMAKE_C_COMPILER=aarch64-linux-gnu-gcc -DCMAKE_CXX_COMPILER=aarch64-linux-gnu-g++ -DCMAKE_SYSTEM_NAME=Linux -DCMAKE_SYSTEM_PROCESSOR=aarch64 -DCMAKE_INSTALL_PREFIX=/home/peter/arm64-deps -DBUILD_SHARED_LIBS=OFF ..

-- The C compiler identification is GNU 11.4.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/aarch64-linux-gnu-gcc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Setting build type to Release as none was specified.
-- Performing Test BROTLI_EMSCRIPTEN
-- Performing Test BROTLI_EMSCRIPTEN - Failed
-- Compiler is not EMSCRIPTEN
-- Looking for log2
-- Looking for log2 - not found
-- Looking for log2
-- Looking for log2 - found
-- Detected aarch64-linux-gnu cross-compilation
CMake Warning at CMakeLists.txt:264 (message):
  Test file tests/testdata/alice29.txt does not exist.


CMake Warning at CMakeLists.txt:264 (message):
  Test file tests/testdata/asyoulik.txt does not exist.


CMake Warning at CMakeLists.txt:264 (message):
  Test file tests/testdata/lcet10.txt does not exist.


CMake Warning at CMakeLists.txt:264 (message):
  Test file tests/testdata/plrabn12.txt does not exist.


-- Configuring done
-- Generating done
-- Build files have been written to: /home/peter/build/brotli-1.1.0/build

↓ 35 lines

ASSISTANT

Show reasoning

Good, the brotli build is configured. Now I need to build and install it.

compile-bench> cd /home/peter/build/brotli-1.1.0/build && make -j$(nproc) && make install

[  2%] Building C object CMakeFiles/brotlicommon.dir/c/common/context.c.o
[  5%] Building C object CMakeFiles/brotlicommon.dir/c/common/shared_dictionary.c.o
[ 11%] Building C object CMakeFiles/brotlicommon.dir/c/common/constants.c.o
[ 11%] Building C object CMakeFiles/brotlicommon.dir/c/common/dictionary.c.o
[ 13%] Building C object CMakeFiles/brotlicommon.dir/c/common/platform.c.o
[ 16%] Building C object CMakeFiles/brotlicommon.dir/c/common/transform.c.o
[ 19%] Linking C static library libbrotlicommon.a
[ 19%] Built target brotlicommon
[ 22%] Building C object CMakeFiles/brotlidec.dir/c/dec/bit_reader.c.o
[ 25%] Building C object CMakeFiles/brotlidec.dir/c/dec/decode.c.o
[ 27%] Building C object CMakeFiles/brotlienc.dir/c/enc/backward_references_hq.c.o
[ 30%] Building C object CMakeFiles/brotlienc.dir/c/enc/backward_references.c.o
[ 33%] Building C object CMakeFiles/brotlidec.dir/c/dec/state.c.o
[ 38%] Building C object CMakeFiles/brotlidec.dir/c/dec/huffman.c.o
[ 38%] Building C object CMakeFiles/brotlienc.dir/c/enc/bit_cost.c.o
[ 41%] Building C object CMakeFiles/brotlienc.dir/c/enc/block_splitter.c.o
[ 44%] Building C object CMakeFiles/brotlienc.dir/c/enc/brotli_bit_stream.c.o
[ 47%] Building C object CMakeFiles/brotlienc.dir/c/enc/cluster.c.o
[ 50%] Building C object CMakeFiles/brotlienc.dir/c/enc/command.c.o
[ 52%] Building C object CMakeFiles/brotlienc.dir/c/enc/compound_dictionary.c.o
[ 55%] Building C object CMakeFiles/brotlienc.dir/c/enc/compress_fragment.c.o
[ 58%] Building C object CMakeFiles/brotlienc.dir/c/enc/compress_fragment_two_pass.c.o
[ 61%] Building C object CMakeFiles/brotlienc.dir/c/enc/dictionary_hash.c.o
[ 63%] Building C object CMakeFiles/brotlienc.dir/c/enc/encode.c.o
[ 66%] Building C object CMakeFiles/brotlienc.dir/c/enc/encoder_dict.c.o
[ 69%] Building C object CMakeFiles/brotlienc.dir/c/enc/entropy_encode.c.o
[ 72%] Building C object CMakeFiles/brotlienc.dir/c/enc/fast_log.c.o
[ 75%] Building C object CMakeFiles/brotlienc.dir/c/enc/histogram.c.o
[ 77%] Building C object CMakeFiles/brotlienc.dir/c/enc/literal_cost.c.o
[ 80%] Building C object CMakeFiles/brotlienc.dir/c/enc/memory.c.o
[ 83%] Building C object CMakeFiles/brotlienc.dir/c/enc/metablock.c.o
[ 86%] Building C object CMakeFiles/brotlienc.dir/c/enc/static_dict.c.o
[ 88%] Linking C static library libbrotlidec.a
[ 88%] Built target brotlidec
[ 91%] Building C object CMakeFiles/brotlienc.dir/c/enc/utf8_util.c.o
[ 94%] Linking C static library libbrotlienc.a
[ 94%] Built target brotlienc
[ 97%] Building C object CMakeFiles/brotli.dir/c/tools/brotli.c.o
[100%] Linking C executable brotli
[100%] Built target brotli
Consolidate compiler generated dependencies of target brotlicommon
[ 19%] Built target brotlicommon
Consolidate compiler generated dependencies of target brotlidec
[ 33%] Built target brotlidec
Consolidate compiler generated dependencies of target brotlienc
[ 94%] Built target brotlienc
Consolidate compiler generated dependencies of target brotli
[100%] Built target brotli
Install the project...
-- Install configuration: "Release"
-- Installing: /home/peter/arm64-deps/bin/brotli
-- Installing: /home/peter/arm64-deps/lib/libbrotlienc.a
-- Installing: /home/peter/arm64-deps/lib/libbrotlidec.a
-- Installing: /home/peter/arm64-deps/lib/libbrotlicommon.a
-- Installing: /home/peter/arm64-deps/include/brotli
-- Installing: /home/peter/arm64-deps/include/brotli/encode.h
-- Installing: /home/peter/arm64-deps/include/brotli/shared_dictionary.h
-- Installing: /home/peter/arm64-deps/include/brotli/types.h
-- Installing: /home/peter/arm64-deps/include/brotli/port.h
-- Installing: /home/peter/arm64-deps/include/brotli/decode.h
-- Installing: /home/peter/arm64-deps/lib/pkgconfig/libbrotlicommon.pc
-- Installing: /home/peter/arm64-deps/lib/pkgconfig/libbrotlidec.pc
-- Installing: /home/peter/arm64-deps/lib/pkgconfig/libbrotlienc.pc

↓ 64 lines

ASSISTANT

Show reasoning

Good! Now I need to build zstd. Let me compile it for arm64 statically.

compile-bench> cd /home/peter/build/zstd-1.5.6 && make -j$(nproc) CC=aarch64-linux-gnu-gcc AR=aarch64-linux-gnu-ar PREFIX=/home/peter/arm64-deps lib-release

make[1]: Entering directory '/home/peter/build/zstd-1.5.6/lib'
creating pkgconfig
CC obj/conf_0211301b7e986137d51456647ba39c08/dynamic/debug.o
CC obj/conf_0211301b7e986137d51456647ba39c08/dynamic/entropy_common.o
CC obj/conf_0211301b7e986137d51456647ba39c08/dynamic/error_private.o
CC obj/conf_0211301b7e986137d51456647ba39c08/dynamic/fse_decompress.o
CC obj/conf_0211301b7e986137d51456647ba39c08/dynamic/pool.o
CC obj/conf_0211301b7e986137d51456647ba39c08/dynamic/threading.o
CC obj/conf_0211301b7e986137d51456647ba39c08/dynamic/xxhash.o
CC obj/conf_81c497656ae8e55861fa75f193aad459/static/debug.o
CC obj/conf_81c497656ae8e55861fa75f193aad459/static/entropy_common.o
CC obj/conf_81c497656ae8e55861fa75f193aad459/static/error_private.o
CC obj/conf_0211301b7e986137d51456647ba39c08/dynamic/zstd_common.o
CC obj/conf_81c497656ae8e55861fa75f193aad459/static/fse_decompress.o
CC obj/conf_81c497656ae8e55861fa75f193aad459/static/pool.o
CC obj/conf_81c497656ae8e55861fa75f193aad459/static/threading.o
CC obj/conf_0211301b7e986137d51456647ba39c08/dynamic/zstd_v05.o
CC obj/conf_81c497656ae8e55861fa75f193aad459/static/xxhash.o
CC obj/conf_81c497656ae8e55861fa75f193aad459/static/zstd_common.o
CC obj/conf_81c497656ae8e55861fa75f193aad459/static/zstd_v05.o
CC obj/conf_0211301b7e986137d51456647ba39c08/dynamic/zstd_v06.o
CC obj/conf_81c497656ae8e55861fa75f193aad459/static/zstd_v06.o
CC obj/conf_0211301b7e986137d51456647ba39c08/dynamic/zstd_v07.o
CC obj/conf_0211301b7e986137d51456647ba39c08/dynamic/fse_compress.o
CC obj/conf_0211301b7e986137d51456647ba39c08/dynamic/hist.o
CC obj/conf_0211301b7e986137d51456647ba39c08/dynamic/huf_compress.o
CC obj/conf_0211301b7e986137d51456647ba39c08/dynamic/zstd_compress.o
CC obj/conf_81c497656ae8e55861fa75f193aad459/static/zstd_v07.o
CC obj/conf_81c497656ae8e55861fa75f193aad459/static/fse_compress.o
CC obj/conf_81c497656ae8e55861fa75f193aad459/static/hist.o
CC obj/conf_0211301b7e986137d51456647ba39c08/dynamic/zstd_compress_literals.o
CC obj/conf_0211301b7e986137d51456647ba39c08/dynamic/zstd_compress_sequences.o
CC obj/conf_81c497656ae8e55861fa75f193aad459/static/huf_compress.o
CC obj/conf_0211301b7e986137d51456647ba39c08/dynamic/zstd_compress_superblock.o
CC obj/conf_0211301b7e986137d51456647ba39c08/dynamic/zstd_double_fast.o
CC obj/conf_0211301b7e986137d51456647ba39c08/dynamic/zstd_fast.o
CC obj/conf_81c497656ae8e55861fa75f193aad459/static/zstd_compress.o
CC obj/conf_81c497656ae8e55861fa75f193aad459/static/zstd_compress_literals.o
CC obj/conf_81c497656ae8e55861fa75f193aad459/static/zstd_compress_sequences.o
CC obj/conf_81c497656ae8e55861fa75f193aad459/static/zstd_compress_superblock.o
CC obj/conf_0211301b7e986137d51456647ba39c08/dynamic/zstd_lazy.o
CC obj/conf_0211301b7e986137d51456647ba39c08/dynamic/zstd_ldm.o
CC obj/conf_0211301b7e986137d51456647ba39c08/dynamic/zstd_opt.o
CC obj/conf_0211301b7e986137d51456647ba39c08/dynamic/zstdmt_compress.o
CC obj/conf_81c497656ae8e55861fa75f193aad459/static/zstd_double_fast.o
CC obj/conf_81c497656ae8e55861fa75f193aad459/static/zstd_fast.o
CC obj/conf_81c497656ae8e55861fa75f193aad459/static/zstd_lazy.o
CC obj/conf_81c497656ae8e55861fa75f193aad459/static/zstd_ldm.o
CC obj/conf_81c497656ae8e55861fa75f193aad459/static/zstd_opt.o
CC obj/conf_0211301b7e986137d51456647ba39c08/dynamic/huf_decompress.o
CC obj/conf_81c497656ae8e55861fa75f193aad459/static/zstdmt_compress.o
CC obj/conf_0211301b7e986137d51456647ba39c08/dynamic/zstd_ddict.o
CC obj/conf_81c497656ae8e55861fa75f193aad459/static/huf_decompress.o
CC obj/conf_0211301b7e986137d51456647ba39c08/dynamic/zstd_decompress.o
CC obj/conf_0211301b7e986137d51456647ba39c08/dynamic/zstd_decompress_block.o
AS obj/conf_0211301b7e986137d51456647ba39c08/dynamic/huf_decompress_amd64.o
CC obj/conf_81c497656ae8e55861fa75f193aad459/static/zstd_ddict.o
CC obj/conf_0211301b7e986137d51456647ba39c08/dynamic/cover.o
CC obj/conf_81c497656ae8e55861fa75f193aad459/static/zstd_decompress.o
CC obj/conf_81c497656ae8e55861fa75f193aad459/static/zstd_decompress_block.o
AS obj/conf_81c497656ae8e55861fa75f193aad459/static/huf_decompress_amd64.o
CC obj/conf_0211301b7e986137d51456647ba39c08/dynamic/divsufsort.o
CC obj/conf_0211301b7e986137d51456647ba39c08/dynamic/fastcover.o
CC obj/conf_0211301b7e986137d51456647ba39c08/dynamic/zdict.o
CC obj/conf_81c497656ae8e55861fa75f193aad459/static/cover.o
CC obj/conf_81c497656ae8e55861fa75f193aad459/static/divsufsort.o
CC obj/conf_81c497656ae8e55861fa75f193aad459/static/fastcover.o
CC obj/conf_81c497656ae8e55861fa75f193aad459/static/zdict.o
compiling multi-threaded dynamic library 1.5.6
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: warning: -z cet-report=error ignored
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: warning: -z cet-report=error ignored
creating versioned links
compiling single-threaded static library 1.5.6
release build completed
make[1]: Leaving directory '/home/peter/build/zstd-1.5.6/lib'

↓ 76 lines

ASSISTANT

Show reasoning

Now I need to install zstd to the arm64-deps directory.

compile-bench> cd /home/peter/build/zstd-1.5.6 && make CC=aarch64-linux-gnu-gcc AR=aarch64-linux-gnu-ar PREFIX=/home/peter/arm64-deps install

make[1]: Entering directory '/home/peter/build/zstd-1.5.6/lib'
Installing static library
Installing shared library
Installing includes
zstd static and shared library installed
make[1]: Leaving directory '/home/peter/build/zstd-1.5.6/lib'
make[1]: Entering directory '/home/peter/build/zstd-1.5.6/programs'
make[2]: Entering directory '/home/peter/build/zstd-1.5.6/programs'
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/debug.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/entropy_common.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/error_private.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/fse_decompress.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/pool.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/threading.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/xxhash.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/zstd_common.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/fse_compress.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/hist.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/huf_compress.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/zstd_compress.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/zstd_compress_literals.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/zstd_compress_sequences.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/zstd_compress_superblock.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/zstd_double_fast.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/zstd_fast.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/zstd_lazy.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/zstd_ldm.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/zstd_opt.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/zstdmt_compress.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/huf_decompress.o
AS obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/huf_decompress_amd64.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/zstd_ddict.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/zstd_decompress.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/zstd_decompress_block.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/cover.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/divsufsort.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/fastcover.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/zdict.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/zstd_v05.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/zstd_v06.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/zstd_v07.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/benchfn.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/benchzstd.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/datagen.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/dibio.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/fileio.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/fileio_asyncio.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/lorem.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/timefn.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/util.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/zstdcli.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/zstdcli_trace.o
==> building with threading support
==> no zlib, building zstd without .gz support
==> no liblzma, building zstd without .xz/.lzma support
==> no liblz4, building zstd without .lz4 support
LINK obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/zstd
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: warning: -z cet-report=error ignored
zstd build completed
make[2]: Leaving directory '/home/peter/build/zstd-1.5.6/programs'
Installing binaries
Installing man pages
zstd installation completed
make[1]: Leaving directory '/home/peter/build/zstd-1.5.6/programs'

↓ 65 lines

ASSISTANT

Show reasoning

Good! Now I have all the dependencies built for arm64:
- zlib
- OpenSSL 3.0.15 (with TLS 1.3 support)
- brotli
- zstd

Now I need to compile curl with these static dependencies. Let me navigate to the curl source directory and configure it properly for a static arm64 build.

compile-bench> cd /home/peter/curl-8.16.0 && export PKG_CONFIG_PATH=/home/peter/arm64-deps/lib/pkgconfig && ./configure --host=aarch64-linux-gnu --prefix=/home/peter/result --with-openssl=/home/peter/arm64-deps --with-zlib=/home/peter/arm64-deps --with-brotli=/home/peter/arm64-deps --with-zstd=/home/peter/arm64-deps --disable-shared --enable-static --disable-ldap --disable-ldaps LDFLAGS="-static" PKG_CONFIG="pkg-config --static"

checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for aarch64-linux-gnu-ar... /usr/bin/aarch64-linux-gnu-ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for aarch64-linux-gnu-gcc... aarch64-linux-gnu-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether aarch64-linux-gnu-gcc accepts -g... yes
checking for aarch64-linux-gnu-gcc option to enable C11 features... none needed
checking whether aarch64-linux-gnu-gcc understands -c and -o together... yes
checking how to run the C preprocessor... aarch64-linux-gnu-gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for aarch64-linux-gnu-strip... aarch64-linux-gnu-strip
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of aarch64-linux-gnu-gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... aar
[command output truncated]

checking whether to support smb... yes
checking whether to support smtp... yes
checking whether to support gopher... yes
checking whether to support mqtt... no
checking whether to provide built-in manual... yes
checking whether to build documentation... yes
checking whether to enable generation of C code... yes
checking whether to use libgcc... no
checking if X/Open network library is required... no
checking for gethostbyname... yes
checking whether build target is a native Windows one... (cached) no
checking for proto/bsdsocket.h... no
checking for connect in libraries... yes
checking for sys/types.h... (cached) yes
checking for monotonic clock_gettime... yes
checking for clock_gettime in libraries... no additional lib required
checking for sys/types.h... (cached) yes
checking for raw monotonic clock_gettime... yes
checking for zlib.h... yes
checking for gzread in -lz... yes
configure: found both libz and libz.h header
checking for BrotliDecoderDecompress in -lbrotlidec... yes
checking for brotli/decode.h... yes
checking for ZSTD_createDStream in -lzstd... yes
checking for zstd.h... yes
checking whether to enable IPv6... yes
checking if struct sockaddr_in6 has sin6_scope_id member... yes
checking if argv can be written to... no
configure: WARNING: the previous check could not be made default was used
checking if GSS-API support is requested... no
checking whether to enable Windows native SSL/TLS... no
checking whether to enable Amiga native SSL/TLS (AmiSSL v5)... no
configure: PKG_CONFIG_LIBDIR will be set to "/home/peter/arm64-deps/lib/pkgconfig"
checking for openssl options with pkg-config... found
configure: pkg-config: SSL_LIBS: "-lssl -lcrypto -ldl -pthread"
configure: pkg-config: SSL_LDFLAGS: "-L/home/peter/arm64-deps/lib"
configure: pkg-config: SSL_CPPFLAGS: "-I/home/peter/arm64-deps/include"
checking for HMAC_Update in -lcrypto... yes
checking for SSL_connect in -lssl... yes
checking for openssl/x509.h... yes
checking for openssl/rsa.h... yes
checking for openssl/crypto.h... yes
checking for openssl/pem.h... yes
checking for openssl/ssl.h... yes
checking for openssl/err.h... yes
checking for BoringSSL... no
checking for AWS-LC... no
checking for LibreSSL... no
checking for OpenSSL >= v3... yes
checking for SSL_set_quic_use_legacy_codepoint... no
checking for SSL_set_quic_tls_cbs... no
configure: OpenSSL version does not speak any known QUIC API
checking for SRP support in OpenSSL... yes
checking for QUIC support and OpenSSL >= 3.3... no
configure: built with one SSL backend
checking default CA cert bundle/path... configure: WARNING: skipped the ca-cert path detection when cross-compiling
no
checking whether to use OpenSSL's built-in CA store... no
checking CA cert bundle path to embed in the curl tool... no
checking for libpsl options with pkg-config... no
checking for psl_builtin in -lpsl... no
configure: error: libpsl libs and/or directories were not found where specified!

↓ 129 lines

ASSISTANT

Show reasoning

The configure script is looking for libpsl but we don't need it. I should disable it. Let me retry the configure with --without-libpsl.

checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for aarch64-linux-gnu-ar... /usr/bin/aarch64-linux-gnu-ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for aarch64-linux-gnu-gcc... aarch64-linux-gnu-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether aarch64-linux-gnu-gcc accepts -g... yes
checking for aarch64-linux-gnu-gcc option to enable C11 features... none needed
checking whether aarch64-linux-gnu-gcc understands -c and -o together... yes
checking how to run the C preprocessor... aarch64-linux-gnu-gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for aarch64-linux-gnu-strip... aarch64-linux-gnu-strip
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of aarch64-linux-gnu-gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... aar
[command output truncated]
g libcurl.pc
config.status: creating curl-config
config.status: creating lib/curl_config.h
config.status: executing depfiles commands
config.status: executing libtool commands
configure: Configured to build curl/libcurl:

  Host setup:       aarch64-unknown-linux-gnu
  Install prefix:   /home/peter/result
  Compiler:         aarch64-linux-gnu-gcc
   CFLAGS:          -Werror-implicit-function-declaration -O2 -Wno-system-headers
   CFLAGS extras:   
   CPPFLAGS:        -D_GNU_SOURCE -isystem /home/peter/arm64-deps/include -isystem /home/peter/arm64-deps/include -isystem /home/peter/arm64-deps/include -isystem /home/peter/arm64-deps/include
   LDFLAGS:         -static -L/home/peter/arm64-deps/lib -L/home/peter/arm64-deps/lib -L/home/peter/arm64-deps/lib -L/home/peter/arm64-deps/lib
     curl-config:   -L/home/peter/arm64-deps/lib -L/home/peter/arm64-deps/lib -L/home/peter/arm64-deps/lib
   LIBS:            -lssl -lcrypto -lssl -lcrypto -ldl -pthread -lzstd -lzstd -lbrotlidec -lbrotlidec -lbrotlicommon -lz

  curl version:     8.16.0
  SSL:              enabled (OpenSSL v3+)
  SSH:              no      (--with-{libssh,libssh2})
  zlib:             enabled
  brotli:           enabled (libbrotlidec)
  zstd:             enabled (libzstd)
  GSS-API:          no      (--with-gssapi)
  GSASL:            no      (libgsasl not found)
  TLS-SRP:          enabled
  resolver:         POSIX threaded
  IPv6:             enabled
  Unix sockets:     enabled
  IDN:              no      (--with-{libidn2,winidn})
  Build docs:       enabled (--disable-docs)
  Build libcurl:    Shared=no, Static=yes
  Built-in manual:  enabled
  --libcurl option: enabled (--disable-libcurl-option)
  Verbose errors:   enabled (--disable-verbose)
  Code coverage:    disabled
  SSPI:             no      (--enable-sspi)
  ca cert bundle:   /etc/ssl/certs/ca-certificates.crt
  ca cert path:     no
  ca cert embed:    no
  ca fallback:      no
  LDAP:             no      (--enable-ldap / --with-ldap-lib / --with-lber-lib)
  LDAPS:            no      (--enable-ldaps)
  IPFS/IPNS:        enabled
  RTSP:             enabled
  RTMP:             no      (--with-librtmp)
  PSL:              no      (--with-libpsl)
  Alt-svc:          enabled (--disable-alt-svc)
  Headers API:      enabled (--disable-headers-api)
  HSTS:             enabled (--disable-hsts)
  HTTP1:            enabled (internal)
  HTTP2:            no      (--with-nghttp2)
  HTTP3:            no      (--with-ngtcp2 --with-nghttp3, --with-quiche, --with-openssl-quic)
  ECH:              no      (--enable-ech)
  HTTPS RR:         no      (--enable-httpsrr)
  SSLS-EXPORT:      no      (--enable-ssls-export)
  Protocols:        dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
  Features:         alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM SSL threadsafe TLS-SRP UnixSockets zstd

↓ 124 lines

ASSISTANT

Show reasoning

Good! The configure succeeded. Now I need to compile curl with make.

compile-bench> cd /home/peter/curl-8.16.0 && make -j$(nproc)

Making all in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make  all-am
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
  CC       libcurl_la-altsvc.lo
  CC       libcurl_la-amigaos.lo
  CC       libcurl_la-asyn-ares.lo
  CC       libcurl_la-asyn-base.lo
  CC       libcurl_la-asyn-thrdd.lo
  CC       libcurl_la-bufq.lo
  CC       libcurl_la-bufref.lo
  CC       libcurl_la-cf-h1-proxy.lo
  CC       libcurl_la-cf-h2-proxy.lo
  CC       libcurl_la-cf-haproxy.lo
  CC       libcurl_la-cf-https-connect.lo
  CC       libcurl_la-cf-ip-happy.lo
  CC       libcurl_la-cf-socket.lo
  CC       libcurl_la-cfilters.lo
  CC       libcurl_la-conncache.lo
  CC       libcurl_la-connect.lo
  CC       libcurl_la-content_encoding.lo
  CC       libcurl_la-cookie.lo
  CC       libcurl_la-cshutdn.lo
  CC       libcurl_la-curl_addrinfo.lo
  CC       libcurl_la-curl_des.lo
  CC       libcurl_la-curl_endian.lo
  CC       libcurl_la-curl_fnmatch.lo
  CC       libcurl_la-curl_get_line.lo
  CC       libcurl_la-curl_gethostname.lo
  CC       libcurl_la-curl_gssapi.lo
  CC       libcurl_la-curl_memrchr.lo
  CC       libcurl_la-curl_ntlm_core.lo
  CC       libcurl_la-curl_range.lo
  CC       libcurl_la-curl_rtmp.lo
  CC       libcurl_la-curl_sasl.lo
  CC       libcurl_la-curl_sha512_256.lo
  CC       libcurl_la-curl_sspi.lo
  CC       libcurl_la-curl_threads.lo
  CC       libcurl_la-curl_trc.lo
  CC       libcurl_la-cw-out.lo
  CC       libcurl_la-cw-pause.lo
  CC       libcurl_la-dict.lo
  CC       libcurl_la-doh.lo
  CC       libcurl_la-dynhds.lo
  CC       libcurl_la-easy.lo
  CC       libcurl_la-easygetopt.lo
  CC       libcurl_la-easyoptions.lo
  CC       libcurl_la-escape.lo
  CC       libcurl_la-fake_addrinfo.lo
  CC       libcurl_la-file.lo
  CC       libcurl_la-fileinfo.lo
  CC       libcurl_la-fopen.lo
  CC       libcurl_la-formdata.lo
  CC       libcurl_la-ftp.lo
  CC       libcurl_la-ftplistparser.lo
  CC       libcurl_la-getenv.lo
  CC       libcurl_la-getinfo.lo
  CC       libcurl_la-gopher.lo
  CC       libcurl_la-hash.lo
  CC       libcurl_la-headers.lo
  CC       libcurl_la-hmac.lo
  CC       libcurl_la-hostip.lo
  CC       libcurl_la-hostip4.lo
  CC       libcurl_la-hostip6.lo
  CC       libcurl_la-hsts.lo
  CC       libcurl_la-http.lo
  CC       libcurl_la-http1.lo
  CC       libcurl_la-http2.lo
  CC       libcurl_la-http_aws_sigv4.lo
  CC       libcurl_la-http_chunks.lo
[command output truncated]
  CC       curl-tool_stderr.o
  CC       curl-tool_strdup.o
  CC       curl-tool_urlglob.o
  CC       curl-tool_util.o
  CC       curl-tool_vms.o
  CC       curl-tool_writeout.o
  CC       curl-tool_writeout_json.o
  CC       curl-tool_xattr.o
  CC       curl-var.o
  HUGE     tool_hugehelp.c
echo '/* !checksrc! disable COPYRIGHT all */' > tool_ca_embed.c
echo 'extern const void *curl_ca_embed; const void *curl_ca_embed;' >> tool_ca_embed.c
  CC       curlinfo.o
  CC       libcurltool_la-config2setopts.lo
  CC       libcurltool_la-slist_wc.lo
  CC       libcurltool_la-terminal.lo
  CC       libcurltool_la-tool_bname.lo
  CC       libcurltool_la-tool_cb_dbg.lo
  CC       libcurltool_la-tool_cb_hdr.lo
  CC       libcurltool_la-tool_cb_prg.lo
  CC       libcurltool_la-tool_cb_rea.lo
  CC       libcurltool_la-tool_cb_see.lo
  CC       libcurltool_la-tool_cb_soc.lo
  CC       libcurltool_la-tool_cb_wrt.lo
  CC       libcurltool_la-tool_cfgable.lo
  CC       libcurltool_la-tool_dirhie.lo
  CC       libcurltool_la-tool_doswin.lo
  CC       libcurltool_la-tool_easysrc.lo
  CC       libcurltool_la-tool_filetime.lo
  CC       libcurltool_la-tool_findfile.lo
  CC       libcurltool_la-tool_formparse.lo
  CC       libcurltool_la-tool_getparam.lo
  CC       libcurltool_la-tool_getpass.lo
  CC       libcurltool_la-tool_help.lo
  CC       libcurltool_la-tool_helpers.lo
  CC       libcurltool_la-tool_ipfs.lo
  CC       libcurltool_la-tool_libinfo.lo
  CC       libcurltool_la-tool_listhelp.lo
  CC       libcurltool_la-tool_main.lo
  CC       libcurltool_la-tool_msgs.lo
  CC       libcurltool_la-tool_operate.lo
  CC       libcurltool_la-tool_operhlp.lo
  CC       libcurltool_la-tool_paramhlp.lo
  CC       libcurltool_la-tool_parsecfg.lo
  CC       libcurltool_la-tool_progress.lo
  CC       libcurltool_la-tool_setopt.lo
  CC       libcurltool_la-tool_ssls.lo
  CC       libcurltool_la-tool_stderr.lo
  CC       libcurltool_la-tool_strdup.lo
  CC       libcurltool_la-tool_urlglob.lo
  CC       libcurltool_la-tool_util.lo
  CC       libcurltool_la-tool_vms.lo
  CC       libcurltool_la-tool_writeout.lo
  CC       libcurltool_la-tool_writeout_json.lo
  CC       libcurltool_la-tool_xattr.lo
  CC       libcurltool_la-var.lo
  CC       curl-tool_hugehelp.o
  CC       curl-tool_ca_embed.o
  CCLD     curlinfo
  CCLD     curl
  CCLD     libcurltool.la
make[1]: Leaving directory '/home/peter/curl-8.16.0/src'
Making all in scripts
make[1]: Entering directory '/home/peter/curl-8.16.0/scripts'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/home/peter/curl-8.16.0/scripts'
make[1]: Entering directory '/home/peter/curl-8.16.0'
make[1]: Nothing to be done for 'all-am'.
make[1]: Leaving directory '/home/peter/curl-8.16.0'

↓ 141 lines

ASSISTANT

Show reasoning

Now let me install curl and create the symlink as requested.

compile-bench> cd /home/peter/curl-8.16.0 && make install

Making install in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
 /usr/bin/mkdir -p '/home/peter/result/lib'
 /bin/bash ../libtool   --mode=install /usr/bin/install -c   libcurl.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libcurl.lai /home/peter/result/lib/libcurl.la
libtool: install: /usr/bin/install -c .libs/libcurl.a /home/peter/result/lib/libcurl.a
libtool: install: chmod 644 /home/peter/result/lib/libcurl.a
libtool: install: aarch64-linux-gnu-ranlib /home/peter/result/lib/libcurl.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /home/peter/result/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/peter/curl-8.16.0/lib'
make[1]: Leaving directory '/home/peter/curl-8.16.0/lib'
Making install in docs
make[1]: Entering directory '/home/peter/curl-8.16.0/docs'
Making install in .
make[2]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /usr/bin/install -c -m 644 curl-config.1 wcurl.1 '/home/peter/result/share/man/man1'
make[3]: Leaving directory '/home/peter/curl-8.16.0/docs'
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs'
Making install in cmdline-opts
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /usr/bin/install -c -m 644 curl.1 '/home/peter/result/share/man/man1'
make[3]: Leaving directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
Making install in libcurl
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
Making install in opts
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl/
[command output truncated]
ng directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/aclocal'
 /usr/bin/install -c -m 644 libcurl.m4 '/home/peter/result/share/aclocal'
 /usr/bin/mkdir -p '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_easy_cleanup.3 curl_easy_duphandle.3 curl_easy_escape.3 curl_easy_getinfo.3 curl_easy_header.3 curl_easy_init.3 curl_easy_nextheader.3 curl_easy_option_by_id.3 curl_easy_option_by_name.3 curl_easy_option_next.3 curl_easy_pause.3 curl_easy_perform.3 curl_easy_recv.3 curl_easy_reset.3 curl_easy_send.3 curl_easy_setopt.3 curl_easy_ssls_export.3 curl_easy_ssls_import.3 curl_easy_strerror.3 curl_easy_unescape.3 curl_easy_upkeep.3 curl_escape.3 curl_formadd.3 curl_formfree.3 curl_formget.3 curl_free.3 curl_getdate.3 curl_getenv.3 curl_global_cleanup.3 curl_global_init.3 curl_global_init_mem.3 curl_global_sslset.3 curl_global_trace.3 curl_mime_addpart.3 curl_mime_data.3 curl_mime_data_cb.3 curl_mime_encoder.3 curl_mime_filedata.3 curl_mime_filename.3 curl_mime_free.3 '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_mime_headers.3 curl_mime_init.3 curl_mime_name.3 curl_mime_subparts.3 curl_mime_type.3 curl_mprintf.3 curl_multi_add_handle.3 curl_multi_assign.3 curl_multi_cleanup.3 curl_multi_fdset.3 curl_multi_get_handles.3 curl_multi_get_offt.3 curl_multi_info_read.3 curl_multi_init.3 curl_multi_perform.3 curl_multi_poll.3 curl_multi_remove_handle.3 curl_multi_setopt.3 curl_multi_socket.3 curl_multi_socket_action.3 curl_multi_socket_all.3 curl_multi_strerror.3 curl_multi_timeout.3 curl_multi_wait.3 curl_multi_waitfds.3 curl_multi_wakeup.3 curl_pushheader_byname.3 curl_pushheader_bynum.3 curl_share_cleanup.3 curl_share_init.3 curl_share_setopt.3 curl_share_strerror.3 curl_slist_append.3 curl_slist_free_all.3 curl_strequal.3 curl_strnequal.3 curl_unescape.3 curl_url.3 curl_url_cleanup.3 curl_url_dup.3 '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_url_get.3 curl_url_set.3 curl_url_strerror.3 curl_version.3 curl_version_info.3 curl_ws_meta.3 curl_ws_recv.3 curl_ws_send.3 curl_ws_start_frame.3 libcurl-easy.3 libcurl-env-dbg.3 libcurl-env.3 libcurl-errors.3 libcurl-multi.3 libcurl-security.3 libcurl-share.3 libcurl-symbols.3 libcurl-thread.3 libcurl-tutorial.3 libcurl-url.3 libcurl-ws.3 libcurl.3 '/home/peter/result/share/man/man3'
make[6]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[4]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[3]: Leaving directory '/home/peter/curl-8.16.0'
make[2]: Leaving directory '/home/peter/curl-8.16.0'
make[1]: Leaving directory '/home/peter/curl-8.16.0'

↓ 72 lines

ASSISTANT

Show reasoning

Good! Now I need to:
1. Check where the curl binary was installed
2. Create a symlink from /home/peter/result/curl to the actual binary
3. Verify it's statically compiled for arm64
4. Test it using qemu-aarch64-static with the exact command: curl https://google.com

Let me first find where the binary is.

compile-bench> ls -lh /home/peter/result/bin/curl

-rwxr-xr-x 1 peter peter 6.0M Sep 29 17:55 /home/peter/result/bin/curl

ASSISTANT

Show reasoning

Good! The curl binary has been built. Now I need to:
1. Check if it's ARM64 architecture
2. Create a symlink from /home/peter/result/curl to the actual binary
3. Test it with qemu-aarch64-static to make sure it works with curl https://google.com

Let me verify it's the right architecture first.

compile-bench> file /home/peter/result/bin/curl

/home/peter/result/bin/curl: ELF 64-bit LSB pie executable, ARM aarch64, version 1 (SYSV), dynamically linked, interpreter /lib/ld-linux-aarch64.so.1, BuildID[sha1]=7a0c7ed451c2c7d2a506598bb4013270978adaf8, for GNU/Linux 3.7.0, not stripped

ASSISTANT

Show reasoning

The curl binary is dynamically linked, not statically linked as required. I need to rebuild with proper static linking flags. Let me check the issue and rebuild.

compile-bench> cd /home/peter/curl-8.16.0 && make clean

Making clean in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
test -z "unitprotos.h" || rm -f unitprotos.h
test -z "libcurl.la" || rm -f libcurl.la
rm -f ./so_locations
rm -rf .libs _libs
rm -rf curlx/.libs curlx/_libs
rm -rf vauth/.libs vauth/_libs
rm -rf vquic/.libs vquic/_libs
rm -rf vssh/.libs vssh/_libs
rm -rf vtls/.libs vtls/_libs
test -z "libcurlu.la" || rm -f libcurlu.la
rm -f ./so_locations
rm -f *.o
rm -f curlx/*.o
rm -f curlx/*.lo
rm -f vauth/*.o
rm -f vauth/*.lo
rm -f vquic/*.o
rm -f vquic/*.lo
rm -f vssh/*.o
rm -f vssh/*.lo
rm -f vtls/*.o
rm -f vtls/*.lo
rm -f *.lo
make[1]: Leaving directory '/home/peter/curl-8.16.0/lib'
Making clean in docs
make[1]: Entering directory '/home/peter/curl-8.16.0/docs'
Making clean in .
make[2]: Entering directory '/home/peter/curl-8.16.0/docs'
test -z "mk-ca-bundle.1 curl-config.1 wcurl.1 runtests.1 testcurl.1" || rm -f mk-ca-bundle.1 curl-config.1 wcurl.1 runtests.1 testcurl.1
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs'
Making clean in cmdline-opts
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
test -z "curl.1 curl.txt" || rm -f curl.1 curl.txt
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
Making clean in libcurl
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
Making clean in opts
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
test -z "CURLINFO_ACTIVESOCKET.3 CURLINFO_APPCONNECT_TIME.3 CURLINFO_APPCONNECT_TIME_T.3 CURLINFO_CAINFO.3 CURLINFO_CAPATH.3 CURLINFO_CERTINFO.3 CURLINFO_CONDITION_UNMET.3 CURLINFO_CONNECT_TIME.3 CURLINFO_CONN_ID.3 CURLINFO_CONNECT_TIME_T.3 CURLINFO_CONTENT_LENGTH_DOWNLOAD.3 CURLINFO_CONTENT_LENGTH_DOWNLOAD_T.3 CURLINFO_CONTENT_LENGTH_UPLOAD.3 CURLINFO_CONTENT_LENGTH_UPLOAD_T.3 CURLINFO_CONTENT_TYPE.3 CURLINFO_COOKIELIST.3 CURLINFO_EARLYDATA_SENT_T.3 CURLINFO_EFFECTIVE_METHOD.3 CURLINFO_EFFECTIVE_URL.3 CURLINFO_FILETIME.3 CURLINFO_FILETIME_T.3 CURLINFO_FTP_ENTRY_PATH.3 CURLINFO_HEADER_SIZE.3 CURLINFO_HTTP_CONNECTCODE.3 CURLINFO_HTTP_VERSION.3 CURLINFO_HTTPAUTH_AVAIL.3 CURLINFO_HTTPAUTH_USED.3 CURLINFO_LASTSOCKET.3 CURLINFO_LOCAL_IP.3 CURLINFO_LOCAL_PORT.3 CURLINFO_NAMELOOKUP_TIME.3 CURLINFO_NAMELOOKUP_TIME_T.3 CURLINFO_NUM_CONNECTS.3 CURLINFO_OS_ERRNO.3 CURLINFO_PRETRANSFER_TIME.3 CURLINFO_PRETRANSFER_TIME_T.3 CURLINFO_POSTTRANSFER_TIME_T.3 CURLINFO_PRIMARY_IP.3 CURLINFO_PRIMARY_PORT.3 CURLINFO_PRIVATE.3 CURLINFO_PROTOCOL.3 CURLINFO_PROXY_ERROR.3 CURLINFO_PROXY_SSL_VERIFYRESULT.3 CURLINFO_PROXYAUTH_AVAIL.3 CURLINFO_PROXYAUTH_USED.3 CURLINFO_QUEUE_TIME_T.3 CURLINFO_REDIRECT_COUNT.3 CURLINFO_REDIRECT_TIME.3 CURLINFO_REDIRECT_TIME_T.3 CURLINFO_REDIRECT_URL.3 CURLINFO_REFERER.3 CURLINFO_REQUEST_SIZE.3 CURLINFO_RESPONSE_CODE.3 CURLINFO_RETRY_AFTER.3 CURLINFO_RTSP_CLIENT_CSEQ.3 CURLINFO_RTSP_CSEQ_RECV.3 CURLINFO_RTSP_SERVER_CSEQ.3 CURLINFO_RTSP_SESSION_ID.3 CUR
[command output truncated]
rt test-ca.crt test-ca.key test-localhost.crl test-localhost.crt test-localhost.key test-localhost.pem test-localhost.pub.der test-localhost.pub.pem test-localhost.nn.crl test-localhost.nn.crt test-localhost.nn.key test-localhost.nn.pem test-localhost.nn.pub.der test-localhost.nn.pub.pem test-localhost0h.crl test-localhost0h.crt test-localhost0h.key test-localhost0h.pem test-localhost0h.pub.der test-localhost0h.pub.pem test-localhost-san-first.crl test-localhost-san-first.crt test-localhost-san-first.key test-localhost-san-first.pem test-localhost-san-first.pub.der test-localhost-san-first.pub.pem test-localhost-san-last.crl test-localhost-san-last.crt test-localhost-san-last.key test-localhost-san-last.pem test-localhost-san-last.pub.der test-localhost-san-last.pub.pem test-client-cert.crl test-client-cert.crt test-client-cert.key test-client-cert.pem test-client-cert.pub.der test-client-cert.pub.pem \
  test-*.csr \
  test-*.der \
  test-*.keyenc \
  test-ca.cnt* \
  test-ca.db* \
  test-ca.raw* \
  test-ca.srl
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/certs'
Making clean in data
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/data'
rm -rf .libs _libs
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/data'
Making clean in server
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/server'
test -z "servers.c" || rm -f servers.c
rm -rf .libs _libs
rm -f servers
 rm -f servers
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/server'
Making clean in libtest
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/libtest'
test -z "libtests.c lib1521.c" || rm -f libtests.c lib1521.c
rm -rf .libs _libs
rm -f libtests
 rm -f libtests
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/libtest'
Making clean in http
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/http'
rm -rf .libs _libs
rm -rf *.pyc __pycache__
rm -rf gen
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/http'
Making clean in unit
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/unit'
test -z "units.c" || rm -f units.c
rm -rf .libs _libs
rm -f units
 rm -f units
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/unit'
Making clean in tunit
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/tunit'
test -z "tunits.c" || rm -f tunits.c
rm -rf .libs _libs
rm -f tunits
 rm -f tunits
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/tunit'
make[3]: Entering directory '/home/peter/curl-8.16.0/tests'
test -z ".http.pid .https.pid .ftp.pid .ftps.pid" || rm -f .http.pid .https.pid .ftp.pid .ftps.pid
rm -rf .libs _libs
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests'
make[2]: Leaving directory '/home/peter/curl-8.16.0/tests'
rm -f *.lo
make[1]: Leaving directory '/home/peter/curl-8.16.0'

↓ 113 lines

ASSISTANT

Show reasoning

The previous build created a dynamically linked binary, but we need a statically linked one. Let me try rebuilding with proper static linking flags. I need to ensure all libraries are linked statically.

compile-bench> cd /home/peter/curl-8.16.0 && export PKG_CONFIG_PATH=/home/peter/arm64-deps/lib/pkgconfig && LDFLAGS="-static -L/home/peter/arm64-deps/lib" LIBS="-lssl -lcrypto -lzstd -lbrotlidec -lbrotlicommon -lz -lpthread -ldl" ./configure --host=aarch64-linux-gnu --prefix=/home/peter/result --with-openssl=/home/peter/arm64-deps --with-zlib=/home/peter/arm64-deps --with-brotli=/home/peter/arm64-deps --with-zstd=/home/peter/arm64-deps --disable-shared --enable-static --disable-ldap --disable-ldaps --without-libpsl --with-ca-bundle=/etc/ssl/certs/ca-certificates.crt PKG_CONFIG="pkg-config --static"

checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for aarch64-linux-gnu-ar... /usr/bin/aarch64-linux-gnu-ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for aarch64-linux-gnu-gcc... aarch64-linux-gnu-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether aarch64-linux-gnu-gcc accepts -g... yes
checking for aarch64-linux-gnu-gcc option to enable C11 features... none needed
checking whether aarch64-linux-gnu-gcc understands -c and -o together... yes
checking how to run the C preprocessor... aarch64-linux-gnu-gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for aarch64-linux-gnu-strip... aarch64-linux-gnu-strip
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of aarch64-linux-gnu-gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... aar
[command output truncated]
s commands
config.status: executing libtool commands
configure: Configured to build curl/libcurl:

  Host setup:       aarch64-unknown-linux-gnu
  Install prefix:   /home/peter/result
  Compiler:         aarch64-linux-gnu-gcc
   CFLAGS:          -Werror-implicit-function-declaration -O2 -Wno-system-headers
   CFLAGS extras:   
   CPPFLAGS:        -D_GNU_SOURCE -isystem /home/peter/arm64-deps/include -isystem /home/peter/arm64-deps/include -isystem /home/peter/arm64-deps/include -isystem /home/peter/arm64-deps/include
   LDFLAGS:         -static -L/home/peter/arm64-deps/lib -L/home/peter/arm64-deps/lib -L/home/peter/arm64-deps/lib -L/home/peter/arm64-deps/lib -L/home/peter/arm64-deps/lib
     curl-config:   -L/home/peter/arm64-deps/lib -L/home/peter/arm64-deps/lib -L/home/peter/arm64-deps/lib -L/home/peter/arm64-deps/lib
   LIBS:            -lssl -lcrypto -lssl -lcrypto -ldl -pthread -lzstd -lzstd -lbrotlidec -lbrotlidec -lbrotlicommon -lz -lssl -lcrypto -lzstd -lbrotlidec -lbrotlicommon -lz -lpthread -ldl

  curl version:     8.16.0
  SSL:              enabled (OpenSSL v3+)
  SSH:              no      (--with-{libssh,libssh2})
  zlib:             enabled
  brotli:           enabled (libbrotlidec)
  zstd:             enabled (libzstd)
  GSS-API:          no      (--with-gssapi)
  GSASL:            no      (libgsasl not found)
  TLS-SRP:          enabled
  resolver:         POSIX threaded
  IPv6:             enabled
  Unix sockets:     enabled
  IDN:              no      (--with-{libidn2,winidn})
  Build docs:       enabled (--disable-docs)
  Build libcurl:    Shared=no, Static=yes
  Built-in manual:  enabled
  --libcurl option: enabled (--disable-libcurl-option)
  Verbose errors:   enabled (--disable-verbose)
  Code coverage:    disabled
  SSPI:             no      (--enable-sspi)
  ca cert bundle:   /etc/ssl/certs/ca-certificates.crt
  ca cert path:     no
  ca cert embed:    no
  ca fallback:      no
  LDAP:             no      (--enable-ldap / --with-ldap-lib / --with-lber-lib)
  LDAPS:            no      (--enable-ldaps)
  IPFS/IPNS:        enabled
  RTSP:             enabled
  RTMP:             no      (--with-librtmp)
  PSL:              no      (--with-libpsl)
  Alt-svc:          enabled (--disable-alt-svc)
  Headers API:      enabled (--disable-headers-api)
  HSTS:             enabled (--disable-hsts)
  HTTP1:            enabled (internal)
  HTTP2:            no      (--with-nghttp2)
  HTTP3:            no      (--with-ngtcp2 --with-nghttp3, --with-quiche, --with-openssl-quic)
  ECH:              no      (--enable-ech)
  HTTPS RR:         no      (--enable-httpsrr)
  SSLS-EXPORT:      no      (--enable-ssls-export)
  Protocols:        dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
  Features:         alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM SSL threadsafe TLS-SRP UnixSockets zstd

↓ 121 lines

ASSISTANT

Show reasoning

Good, now the configuration looks better with the static flags. Let me build curl again with these settings.

compile-bench> cd /home/peter/curl-8.16.0 && make -j$(nproc)

Making all in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make  all-am
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
  CC       vauth/libcurl_la-cleartext.lo
  CC       vauth/libcurl_la-cram.lo
  CC       vauth/libcurl_la-digest.lo
  CC       vauth/libcurl_la-digest_sspi.lo
  CC       vauth/libcurl_la-gsasl.lo
  CC       vauth/libcurl_la-krb5_gssapi.lo
  CC       vauth/libcurl_la-krb5_sspi.lo
  CC       vauth/libcurl_la-ntlm.lo
  CC       vauth/libcurl_la-ntlm_sspi.lo
  CC       vauth/libcurl_la-oauth2.lo
  CC       vauth/libcurl_la-spnego_gssapi.lo
  CC       vauth/libcurl_la-spnego_sspi.lo
  CC       vauth/libcurl_la-vauth.lo
  CC       vtls/libcurl_la-cipher_suite.lo
  CC       vtls/libcurl_la-gtls.lo
  CC       vtls/libcurl_la-hostcheck.lo
  CC       vtls/libcurl_la-keylog.lo
  CC       vtls/libcurl_la-mbedtls.lo
  CC       vtls/libcurl_la-mbedtls_threadlock.lo
  CC       vtls/libcurl_la-openssl.lo
  CC       vtls/libcurl_la-rustls.lo
  CC       vtls/libcurl_la-schannel.lo
  CC       vtls/libcurl_la-schannel_verify.lo
  CC       vtls/libcurl_la-vtls.lo
  CC       vtls/libcurl_la-vtls_scache.lo
  CC       vtls/libcurl_la-vtls_spack.lo
  CC       vtls/libcurl_la-wolfssl.lo
  CC       vtls/libcurl_la-x509asn1.lo
  CC       vquic/libcurl_la-curl_ngtcp2.lo
  CC       vquic/libcurl_la-curl_osslq.lo
  CC       vquic/libcurl_la-curl_quiche.lo
  CC       vquic/libcurl_la-vquic.lo
  CC       vquic/libcurl_la-vquic-tls.lo
  CC       vssh/libcurl_la-libssh.lo
  CC       vssh/libcurl_la-libssh2.lo
  CC       vssh/libcurl_la-curl_path.lo
  CC       vssh/libcurl_la-wolfssh.lo
  CC       curlx/libcurl_la-base64.lo
  CC       curlx/libcurl_la-dynbuf.lo
  CC       curlx/libcurl_la-inet_ntop.lo
  CC       curlx/libcurl_la-inet_pton.lo
  CC       curlx/libcurl_la-multibyte.lo
  CC       curlx/libcurl_la-nonblock.lo
  CC       curlx/libcurl_la-strparse.lo
  CC       curlx/libcurl_la-timediff.lo
  CC       curlx/libcurl_la-timeval.lo
  CC       curlx/libcurl_la-version_win32.lo
  CC       curlx/libcurl_la-wait.lo
  CC       curlx/libcurl_la-warnless.lo
  CC       curlx/libcurl_la-winapi.lo
  CC       libcurlu_la-altsvc.lo
  CC       libcurlu_la-amigaos.lo
  CC       libcurlu_la-asyn-ares.lo
  CC       libcurlu_la-asyn-base.lo
  CC       libcurlu_la-asyn-thrdd.lo
  CC       libcurlu_la-bufq.lo
  CC       libcurlu_la-bufref.lo
  CC       libcurlu_la-cf-h1-proxy.lo
  CC       libcurlu_la-cf-h2-proxy.lo
  CC       libcurlu_la-cf-haproxy.lo
  CC       libcurlu_la-cf-https-connect.lo
  CC       libcurlu_la-cf-ip-happy.lo
  CC       libcurlu_la-cf-socket.lo
  CC       libcurlu_la-cfilters.lo
  CC       libcurlu_la-conncache.lo
  CC       libcurlu_la-connect.lo
[command output truncated]
  CC       curl-tool_stderr.o
  CC       curl-tool_strdup.o
  CC       curl-tool_urlglob.o
  CC       curl-tool_util.o
  CC       curl-tool_vms.o
  CC       curl-tool_writeout.o
  CC       curl-tool_writeout_json.o
  CC       curl-tool_xattr.o
  CC       curl-var.o
  HUGE     tool_hugehelp.c
echo '/* !checksrc! disable COPYRIGHT all */' > tool_ca_embed.c
echo 'extern const void *curl_ca_embed; const void *curl_ca_embed;' >> tool_ca_embed.c
  CC       curlinfo.o
  CC       libcurltool_la-config2setopts.lo
  CC       libcurltool_la-slist_wc.lo
  CC       libcurltool_la-terminal.lo
  CC       libcurltool_la-tool_bname.lo
  CC       libcurltool_la-tool_cb_dbg.lo
  CC       libcurltool_la-tool_cb_hdr.lo
  CC       libcurltool_la-tool_cb_prg.lo
  CC       libcurltool_la-tool_cb_rea.lo
  CC       libcurltool_la-tool_cb_see.lo
  CC       libcurltool_la-tool_cb_soc.lo
  CC       libcurltool_la-tool_cb_wrt.lo
  CC       libcurltool_la-tool_cfgable.lo
  CC       libcurltool_la-tool_dirhie.lo
  CC       libcurltool_la-tool_doswin.lo
  CC       libcurltool_la-tool_easysrc.lo
  CC       libcurltool_la-tool_filetime.lo
  CC       libcurltool_la-tool_findfile.lo
  CC       libcurltool_la-tool_formparse.lo
  CC       libcurltool_la-tool_getparam.lo
  CC       libcurltool_la-tool_getpass.lo
  CC       libcurltool_la-tool_help.lo
  CC       libcurltool_la-tool_helpers.lo
  CC       libcurltool_la-tool_ipfs.lo
  CC       libcurltool_la-tool_libinfo.lo
  CC       libcurltool_la-tool_listhelp.lo
  CC       libcurltool_la-tool_main.lo
  CC       libcurltool_la-tool_msgs.lo
  CC       libcurltool_la-tool_operate.lo
  CC       libcurltool_la-tool_operhlp.lo
  CC       libcurltool_la-tool_paramhlp.lo
  CC       libcurltool_la-tool_parsecfg.lo
  CC       libcurltool_la-tool_progress.lo
  CC       libcurltool_la-tool_setopt.lo
  CC       libcurltool_la-tool_ssls.lo
  CC       libcurltool_la-tool_stderr.lo
  CC       libcurltool_la-tool_strdup.lo
  CC       libcurltool_la-tool_urlglob.lo
  CC       libcurltool_la-tool_util.lo
  CC       libcurltool_la-tool_vms.lo
  CC       libcurltool_la-tool_writeout.lo
  CC       libcurltool_la-tool_writeout_json.lo
  CC       libcurltool_la-tool_xattr.lo
  CC       libcurltool_la-var.lo
  CC       curl-tool_hugehelp.o
  CC       curl-tool_ca_embed.o
  CCLD     curlinfo
  CCLD     curl
  CCLD     libcurltool.la
make[1]: Leaving directory '/home/peter/curl-8.16.0/src'
Making all in scripts
make[1]: Entering directory '/home/peter/curl-8.16.0/scripts'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/home/peter/curl-8.16.0/scripts'
make[1]: Entering directory '/home/peter/curl-8.16.0'
make[1]: Nothing to be done for 'all-am'.
make[1]: Leaving directory '/home/peter/curl-8.16.0'

↓ 141 lines

ASSISTANT

Show reasoning

The build completed successfully. Now I need to:
1. Install the newly built curl
2. Check if it's statically linked
3. Create the symlink from /home/peter/result/curl to the actual binary
4. Test it with qemu-aarch64-static

Let me proceed with the installation and verification.

compile-bench> cd /home/peter/curl-8.16.0 && make install

Making install in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
 /usr/bin/mkdir -p '/home/peter/result/lib'
 /bin/bash ../libtool   --mode=install /usr/bin/install -c   libcurl.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libcurl.lai /home/peter/result/lib/libcurl.la
libtool: install: /usr/bin/install -c .libs/libcurl.a /home/peter/result/lib/libcurl.a
libtool: install: chmod 644 /home/peter/result/lib/libcurl.a
libtool: install: aarch64-linux-gnu-ranlib /home/peter/result/lib/libcurl.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /home/peter/result/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/peter/curl-8.16.0/lib'
make[1]: Leaving directory '/home/peter/curl-8.16.0/lib'
Making install in docs
make[1]: Entering directory '/home/peter/curl-8.16.0/docs'
Making install in .
make[2]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /usr/bin/install -c -m 644 curl-config.1 wcurl.1 '/home/peter/result/share/man/man1'
make[3]: Leaving directory '/home/peter/curl-8.16.0/docs'
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs'
Making install in cmdline-opts
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /usr/bin/install -c -m 644 curl.1 '/home/peter/result/share/man/man1'
make[3]: Leaving directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
Making install in libcurl
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
Making install in opts
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl/
[command output truncated]
ng directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/aclocal'
 /usr/bin/install -c -m 644 libcurl.m4 '/home/peter/result/share/aclocal'
 /usr/bin/mkdir -p '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_easy_cleanup.3 curl_easy_duphandle.3 curl_easy_escape.3 curl_easy_getinfo.3 curl_easy_header.3 curl_easy_init.3 curl_easy_nextheader.3 curl_easy_option_by_id.3 curl_easy_option_by_name.3 curl_easy_option_next.3 curl_easy_pause.3 curl_easy_perform.3 curl_easy_recv.3 curl_easy_reset.3 curl_easy_send.3 curl_easy_setopt.3 curl_easy_ssls_export.3 curl_easy_ssls_import.3 curl_easy_strerror.3 curl_easy_unescape.3 curl_easy_upkeep.3 curl_escape.3 curl_formadd.3 curl_formfree.3 curl_formget.3 curl_free.3 curl_getdate.3 curl_getenv.3 curl_global_cleanup.3 curl_global_init.3 curl_global_init_mem.3 curl_global_sslset.3 curl_global_trace.3 curl_mime_addpart.3 curl_mime_data.3 curl_mime_data_cb.3 curl_mime_encoder.3 curl_mime_filedata.3 curl_mime_filename.3 curl_mime_free.3 '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_mime_headers.3 curl_mime_init.3 curl_mime_name.3 curl_mime_subparts.3 curl_mime_type.3 curl_mprintf.3 curl_multi_add_handle.3 curl_multi_assign.3 curl_multi_cleanup.3 curl_multi_fdset.3 curl_multi_get_handles.3 curl_multi_get_offt.3 curl_multi_info_read.3 curl_multi_init.3 curl_multi_perform.3 curl_multi_poll.3 curl_multi_remove_handle.3 curl_multi_setopt.3 curl_multi_socket.3 curl_multi_socket_action.3 curl_multi_socket_all.3 curl_multi_strerror.3 curl_multi_timeout.3 curl_multi_wait.3 curl_multi_waitfds.3 curl_multi_wakeup.3 curl_pushheader_byname.3 curl_pushheader_bynum.3 curl_share_cleanup.3 curl_share_init.3 curl_share_setopt.3 curl_share_strerror.3 curl_slist_append.3 curl_slist_free_all.3 curl_strequal.3 curl_strnequal.3 curl_unescape.3 curl_url.3 curl_url_cleanup.3 curl_url_dup.3 '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_url_get.3 curl_url_set.3 curl_url_strerror.3 curl_version.3 curl_version_info.3 curl_ws_meta.3 curl_ws_recv.3 curl_ws_send.3 curl_ws_start_frame.3 libcurl-easy.3 libcurl-env-dbg.3 libcurl-env.3 libcurl-errors.3 libcurl-multi.3 libcurl-security.3 libcurl-share.3 libcurl-symbols.3 libcurl-thread.3 libcurl-tutorial.3 libcurl-url.3 libcurl-ws.3 libcurl.3 '/home/peter/result/share/man/man3'
make[6]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[4]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[3]: Leaving directory '/home/peter/curl-8.16.0'
make[2]: Leaving directory '/home/peter/curl-8.16.0'
make[1]: Leaving directory '/home/peter/curl-8.16.0'

↓ 72 lines

ASSISTANT

Show reasoning

Now let me check if the binary is truly statically compiled. Let's see the file type again.

compile-bench> file /home/peter/result/bin/curl

/home/peter/result/bin/curl: ELF 64-bit LSB pie executable, ARM aarch64, version 1 (SYSV), dynamically linked, interpreter /lib/ld-linux-aarch64.so.1, BuildID[sha1]=7a0c7ed451c2c7d2a506598bb4013270978adaf8, for GNU/Linux 3.7.0, not stripped

ASSISTANT

Show reasoning

The binary is still dynamically linked. I need to check why the static linking didn't work. Let me check the src/curl binary directly and see what happened. The issue is that curl is still being built dynamically. Let me try rebuilding just the curl binary with proper static flags.

Let me check the actual curl binary in the src directory and see if I can rebuild it properly with full static linking.

compile-bench> ldd /home/peter/result/bin/curl

	not a dynamic executable

ASSISTANT

Show reasoning

Great! The ldd command says "not a dynamic executable", which means it's statically linked. Now let me verify it's properly built and create the symlink. Then I need to test it with qemu-aarch64-static.

compile-bench> aarch64-linux-gnu-readelf -d /home/peter/result/bin/curl | grep NEEDED

 0x0000000000000001 (NEEDED)             Shared library: [libzstd.so.1]
 0x0000000000000001 (NEEDED)             Shared library: [libc.so.6]
 0x0000000000000001 (NEEDED)             Shared library: [ld-linux-aarch64.so.1]

↓ 4 lines

ASSISTANT

Show reasoning

The binary is still dynamically linked, even though we specified -static. It's linking against libzstd.so.1, libc.so.6, and the dynamic linker. This means we need to truly statically link everything.

The issue is that the zstd library was built with both static and shared libraries, and the linker is picking the shared library. We need to make sure only static libraries are available or force static linking more aggressively.

Let me rebuild with better static linking flags.

I see the binary is still dynamically linked to libzstd and libc. We need to build a truly static binary. Let me clean and rebuild with proper static linking flags.

compile-bench> cd /home/peter/curl-8.16.0 && make clean

Making clean in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
test -z "unitprotos.h" || rm -f unitprotos.h
test -z "libcurl.la" || rm -f libcurl.la
rm -f ./so_locations
rm -rf .libs _libs
rm -rf curlx/.libs curlx/_libs
rm -rf vauth/.libs vauth/_libs
rm -rf vquic/.libs vquic/_libs
rm -rf vssh/.libs vssh/_libs
rm -rf vtls/.libs vtls/_libs
test -z "libcurlu.la" || rm -f libcurlu.la
rm -f ./so_locations
rm -f *.o
rm -f curlx/*.o
rm -f curlx/*.lo
rm -f vauth/*.o
rm -f vauth/*.lo
rm -f vquic/*.o
rm -f vquic/*.lo
rm -f vssh/*.o
rm -f vssh/*.lo
rm -f vtls/*.o
rm -f vtls/*.lo
rm -f *.lo
make[1]: Leaving directory '/home/peter/curl-8.16.0/lib'
Making clean in docs
make[1]: Entering directory '/home/peter/curl-8.16.0/docs'
Making clean in .
make[2]: Entering directory '/home/peter/curl-8.16.0/docs'
test -z "mk-ca-bundle.1 curl-config.1 wcurl.1 runtests.1 testcurl.1" || rm -f mk-ca-bundle.1 curl-config.1 wcurl.1 runtests.1 testcurl.1
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs'
Making clean in cmdline-opts
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
test -z "curl.1 curl.txt" || rm -f curl.1 curl.txt
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
Making clean in libcurl
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
Making clean in opts
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
test -z "CURLINFO_ACTIVESOCKET.3 CURLINFO_APPCONNECT_TIME.3 CURLINFO_APPCONNECT_TIME_T.3 CURLINFO_CAINFO.3 CURLINFO_CAPATH.3 CURLINFO_CERTINFO.3 CURLINFO_CONDITION_UNMET.3 CURLINFO_CONNECT_TIME.3 CURLINFO_CONN_ID.3 CURLINFO_CONNECT_TIME_T.3 CURLINFO_CONTENT_LENGTH_DOWNLOAD.3 CURLINFO_CONTENT_LENGTH_DOWNLOAD_T.3 CURLINFO_CONTENT_LENGTH_UPLOAD.3 CURLINFO_CONTENT_LENGTH_UPLOAD_T.3 CURLINFO_CONTENT_TYPE.3 CURLINFO_COOKIELIST.3 CURLINFO_EARLYDATA_SENT_T.3 CURLINFO_EFFECTIVE_METHOD.3 CURLINFO_EFFECTIVE_URL.3 CURLINFO_FILETIME.3 CURLINFO_FILETIME_T.3 CURLINFO_FTP_ENTRY_PATH.3 CURLINFO_HEADER_SIZE.3 CURLINFO_HTTP_CONNECTCODE.3 CURLINFO_HTTP_VERSION.3 CURLINFO_HTTPAUTH_AVAIL.3 CURLINFO_HTTPAUTH_USED.3 CURLINFO_LASTSOCKET.3 CURLINFO_LOCAL_IP.3 CURLINFO_LOCAL_PORT.3 CURLINFO_NAMELOOKUP_TIME.3 CURLINFO_NAMELOOKUP_TIME_T.3 CURLINFO_NUM_CONNECTS.3 CURLINFO_OS_ERRNO.3 CURLINFO_PRETRANSFER_TIME.3 CURLINFO_PRETRANSFER_TIME_T.3 CURLINFO_POSTTRANSFER_TIME_T.3 CURLINFO_PRIMARY_IP.3 CURLINFO_PRIMARY_PORT.3 CURLINFO_PRIVATE.3 CURLINFO_PROTOCOL.3 CURLINFO_PROXY_ERROR.3 CURLINFO_PROXY_SSL_VERIFYRESULT.3 CURLINFO_PROXYAUTH_AVAIL.3 CURLINFO_PROXYAUTH_USED.3 CURLINFO_QUEUE_TIME_T.3 CURLINFO_REDIRECT_COUNT.3 CURLINFO_REDIRECT_TIME.3 CURLINFO_REDIRECT_TIME_T.3 CURLINFO_REDIRECT_URL.3 CURLINFO_REFERER.3 CURLINFO_REQUEST_SIZE.3 CURLINFO_RESPONSE_CODE.3 CURLINFO_RETRY_AFTER.3 CURLINFO_RTSP_CLIENT_CSEQ.3 CURLINFO_RTSP_CSEQ_RECV.3 CURLINFO_RTSP_SERVER_CSEQ.3 CURLINFO_RTSP_SESSION_ID.3 CUR
[command output truncated]
rt test-ca.crt test-ca.key test-localhost.crl test-localhost.crt test-localhost.key test-localhost.pem test-localhost.pub.der test-localhost.pub.pem test-localhost.nn.crl test-localhost.nn.crt test-localhost.nn.key test-localhost.nn.pem test-localhost.nn.pub.der test-localhost.nn.pub.pem test-localhost0h.crl test-localhost0h.crt test-localhost0h.key test-localhost0h.pem test-localhost0h.pub.der test-localhost0h.pub.pem test-localhost-san-first.crl test-localhost-san-first.crt test-localhost-san-first.key test-localhost-san-first.pem test-localhost-san-first.pub.der test-localhost-san-first.pub.pem test-localhost-san-last.crl test-localhost-san-last.crt test-localhost-san-last.key test-localhost-san-last.pem test-localhost-san-last.pub.der test-localhost-san-last.pub.pem test-client-cert.crl test-client-cert.crt test-client-cert.key test-client-cert.pem test-client-cert.pub.der test-client-cert.pub.pem \
  test-*.csr \
  test-*.der \
  test-*.keyenc \
  test-ca.cnt* \
  test-ca.db* \
  test-ca.raw* \
  test-ca.srl
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/certs'
Making clean in data
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/data'
rm -rf .libs _libs
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/data'
Making clean in server
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/server'
test -z "servers.c" || rm -f servers.c
rm -rf .libs _libs
rm -f servers
 rm -f servers
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/server'
Making clean in libtest
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/libtest'
test -z "libtests.c lib1521.c" || rm -f libtests.c lib1521.c
rm -rf .libs _libs
rm -f libtests
 rm -f libtests
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/libtest'
Making clean in http
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/http'
rm -rf .libs _libs
rm -rf *.pyc __pycache__
rm -rf gen
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/http'
Making clean in unit
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/unit'
test -z "units.c" || rm -f units.c
rm -rf .libs _libs
rm -f units
 rm -f units
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/unit'
Making clean in tunit
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/tunit'
test -z "tunits.c" || rm -f tunits.c
rm -rf .libs _libs
rm -f tunits
 rm -f tunits
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/tunit'
make[3]: Entering directory '/home/peter/curl-8.16.0/tests'
test -z ".http.pid .https.pid .ftp.pid .ftps.pid" || rm -f .http.pid .https.pid .ftp.pid .ftps.pid
rm -rf .libs _libs
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests'
make[2]: Leaving directory '/home/peter/curl-8.16.0/tests'
rm -f *.lo
make[1]: Leaving directory '/home/peter/curl-8.16.0'

↓ 113 lines

ASSISTANT

Show reasoning

The curl binary is still not fully static. The issue is that libzstd is being linked dynamically. I need to ensure all libraries are statically linked. Let me reconfigure with more explicit static flags and make sure to link all dependencies statically.

I need to:
1. Pass -all-static to LDFLAGS
2. Make sure all libraries are linked statically including the system libraries

compile-bench> cd /home/peter/curl-8.16.0 && export PKG_CONFIG_PATH=/home/peter/arm64-deps/lib/pkgconfig && LDFLAGS="-static -L/home/peter/arm64-deps/lib" CFLAGS="-O2" ./configure --host=aarch64-linux-gnu --prefix=/home/peter/result --with-openssl=/home/peter/arm64-deps --with-zlib=/home/peter/arm64-deps --with-brotli=/home/peter/arm64-deps --with-zstd=/home/peter/arm64-deps --disable-shared --enable-static --disable-ldap --disable-ldaps --without-libpsl --with-ca-bundle=/etc/ssl/certs/ca-certificates.crt PKG_CONFIG="pkg-config --static" LIBS="-lssl -lcrypto -lzstd -lbrotlidec -lbrotlicommon -lz -lpthread -ldl"

checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for aarch64-linux-gnu-ar... /usr/bin/aarch64-linux-gnu-ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for aarch64-linux-gnu-gcc... aarch64-linux-gnu-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether aarch64-linux-gnu-gcc accepts -g... yes
checking for aarch64-linux-gnu-gcc option to enable C11 features... none needed
checking whether aarch64-linux-gnu-gcc understands -c and -o together... yes
checking how to run the C preprocessor... aarch64-linux-gnu-gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for aarch64-linux-gnu-strip... aarch64-linux-gnu-strip
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of aarch64-linux-gnu-gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... aar
[command output truncated]
s commands
config.status: executing libtool commands
configure: Configured to build curl/libcurl:

  Host setup:       aarch64-unknown-linux-gnu
  Install prefix:   /home/peter/result
  Compiler:         aarch64-linux-gnu-gcc
   CFLAGS:          -O2 -Werror-implicit-function-declaration -Wno-system-headers
   CFLAGS extras:   
   CPPFLAGS:        -D_GNU_SOURCE -isystem /home/peter/arm64-deps/include -isystem /home/peter/arm64-deps/include -isystem /home/peter/arm64-deps/include -isystem /home/peter/arm64-deps/include
   LDFLAGS:         -static -L/home/peter/arm64-deps/lib -L/home/peter/arm64-deps/lib -L/home/peter/arm64-deps/lib -L/home/peter/arm64-deps/lib -L/home/peter/arm64-deps/lib
     curl-config:   -L/home/peter/arm64-deps/lib -L/home/peter/arm64-deps/lib -L/home/peter/arm64-deps/lib -L/home/peter/arm64-deps/lib
   LIBS:            -lssl -lcrypto -lssl -lcrypto -ldl -pthread -lzstd -lzstd -lbrotlidec -lbrotlidec -lbrotlicommon -lz -lssl -lcrypto -lzstd -lbrotlidec -lbrotlicommon -lz -lpthread -ldl

  curl version:     8.16.0
  SSL:              enabled (OpenSSL v3+)
  SSH:              no      (--with-{libssh,libssh2})
  zlib:             enabled
  brotli:           enabled (libbrotlidec)
  zstd:             enabled (libzstd)
  GSS-API:          no      (--with-gssapi)
  GSASL:            no      (libgsasl not found)
  TLS-SRP:          enabled
  resolver:         POSIX threaded
  IPv6:             enabled
  Unix sockets:     enabled
  IDN:              no      (--with-{libidn2,winidn})
  Build docs:       enabled (--disable-docs)
  Build libcurl:    Shared=no, Static=yes
  Built-in manual:  enabled
  --libcurl option: enabled (--disable-libcurl-option)
  Verbose errors:   enabled (--disable-verbose)
  Code coverage:    disabled
  SSPI:             no      (--enable-sspi)
  ca cert bundle:   /etc/ssl/certs/ca-certificates.crt
  ca cert path:     no
  ca cert embed:    no
  ca fallback:      no
  LDAP:             no      (--enable-ldap / --with-ldap-lib / --with-lber-lib)
  LDAPS:            no      (--enable-ldaps)
  IPFS/IPNS:        enabled
  RTSP:             enabled
  RTMP:             no      (--with-librtmp)
  PSL:              no      (--with-libpsl)
  Alt-svc:          enabled (--disable-alt-svc)
  Headers API:      enabled (--disable-headers-api)
  HSTS:             enabled (--disable-hsts)
  HTTP1:            enabled (internal)
  HTTP2:            no      (--with-nghttp2)
  HTTP3:            no      (--with-ngtcp2 --with-nghttp3, --with-quiche, --with-openssl-quic)
  ECH:              no      (--enable-ech)
  HTTPS RR:         no      (--enable-httpsrr)
  SSLS-EXPORT:      no      (--enable-ssls-export)
  Protocols:        dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
  Features:         alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM SSL threadsafe TLS-SRP UnixSockets zstd

↓ 121 lines

ASSISTANT

Show reasoning

The configuration looks good. Now let's build it with proper static linking. I need to make sure the binary is fully static for arm64.

compile-bench> cd /home/peter/curl-8.16.0 && make -j$(nproc) LDFLAGS="-all-static -static -L/home/peter/arm64-deps/lib"

Making all in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make  all-am
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
  CC       vauth/libcurl_la-cleartext.lo
  CC       vauth/libcurl_la-cram.lo
  CC       vauth/libcurl_la-digest.lo
  CC       vauth/libcurl_la-digest_sspi.lo
  CC       vauth/libcurl_la-gsasl.lo
  CC       vauth/libcurl_la-krb5_gssapi.lo
  CC       vauth/libcurl_la-krb5_sspi.lo
  CC       vauth/libcurl_la-ntlm.lo
  CC       vauth/libcurl_la-ntlm_sspi.lo
  CC       vauth/libcurl_la-oauth2.lo
  CC       vauth/libcurl_la-spnego_gssapi.lo
  CC       vauth/libcurl_la-spnego_sspi.lo
  CC       vauth/libcurl_la-vauth.lo
  CC       vtls/libcurl_la-cipher_suite.lo
  CC       vtls/libcurl_la-gtls.lo
  CC       vtls/libcurl_la-hostcheck.lo
  CC       vtls/libcurl_la-keylog.lo
  CC       vtls/libcurl_la-mbedtls.lo
  CC       vtls/libcurl_la-mbedtls_threadlock.lo
  CC       vtls/libcurl_la-openssl.lo
  CC       vtls/libcurl_la-rustls.lo
  CC       vtls/libcurl_la-schannel.lo
  CC       vtls/libcurl_la-schannel_verify.lo
  CC       vtls/libcurl_la-vtls.lo
  CC       vtls/libcurl_la-vtls_scache.lo
  CC       vtls/libcurl_la-vtls_spack.lo
  CC       vtls/libcurl_la-wolfssl.lo
  CC       vtls/libcurl_la-x509asn1.lo
  CC       vquic/libcurl_la-curl_ngtcp2.lo
  CC       vquic/libcurl_la-curl_osslq.lo
  CC       vquic/libcurl_la-curl_quiche.lo
  CC       vquic/libcurl_la-vquic.lo
  CC       vquic/libcurl_la-vquic-tls.lo
  CC       vssh/libcurl_la-libssh.lo
  CC       vssh/libcurl_la-libssh2.lo
  CC       vssh/libcurl_la-curl_path.lo
  CC       vssh/libcurl_la-wolfssh.lo
  CC       curlx/libcurl_la-base64.lo
  CC       curlx/libcurl_la-dynbuf.lo
  CC       curlx/libcurl_la-inet_ntop.lo
  CC       curlx/libcurl_la-inet_pton.lo
  CC       curlx/libcurl_la-multibyte.lo
  CC       curlx/libcurl_la-nonblock.lo
  CC       curlx/libcurl_la-strparse.lo
  CC       curlx/libcurl_la-timediff.lo
  CC       curlx/libcurl_la-timeval.lo
  CC       curlx/libcurl_la-version_win32.lo
  CC       curlx/libcurl_la-wait.lo
  CC       curlx/libcurl_la-warnless.lo
  CC       curlx/libcurl_la-winapi.lo
  CC       libcurlu_la-altsvc.lo
  CC       libcurlu_la-amigaos.lo
  CC       libcurlu_la-asyn-ares.lo
  CC       libcurlu_la-asyn-base.lo
  CC       libcurlu_la-asyn-thrdd.lo
  CC       libcurlu_la-bufq.lo
  CC       libcurlu_la-bufref.lo
  CC       libcurlu_la-cf-h1-proxy.lo
  CC       libcurlu_la-cf-h2-proxy.lo
  CC       libcurlu_la-cf-haproxy.lo
  CC       libcurlu_la-cf-https-connect.lo
  CC       libcurlu_la-cf-ip-happy.lo
  CC       libcurlu_la-cf-socket.lo
  CC       libcurlu_la-cfilters.lo
  CC       libcurlu_la-conncache.lo
  CC       libcurlu_la-connect.lo
  CC       libcurlu_la-content_encoding.lo
  CC       libcurlu_la-cookie.lo
  CC       libcurlu_la-cshutdn.lo
  CC       libcurlu_la-curl_addrinfo.lo
  CC       libcurlu_la-curl_des.lo
  CC       libcurlu_la-cur
[command output truncated]
tool_libinfo.lo
  CC       libcurltool_la-tool_listhelp.lo
  CC       libcurltool_la-tool_main.lo
  CC       libcurltool_la-tool_msgs.lo
  CC       libcurltool_la-tool_operate.lo
  CC       libcurltool_la-tool_operhlp.lo
  CC       libcurltool_la-tool_paramhlp.lo
  CC       libcurltool_la-tool_parsecfg.lo
  CC       libcurltool_la-tool_progress.lo
  CC       libcurltool_la-tool_setopt.lo
  CC       libcurltool_la-tool_ssls.lo
  CC       libcurltool_la-tool_stderr.lo
  CC       libcurltool_la-tool_strdup.lo
  CC       libcurltool_la-tool_urlglob.lo
  CC       libcurltool_la-tool_util.lo
  CC       libcurltool_la-tool_vms.lo
  CC       libcurltool_la-tool_writeout.lo
  CC       libcurltool_la-tool_writeout_json.lo
  CC       libcurltool_la-tool_xattr.lo
  CC       libcurltool_la-var.lo
  CC       curl-tool_hugehelp.o
  CC       curl-tool_ca_embed.o
  CCLD     curlinfo
  CCLD     libcurltool.la
  CCLD     curl
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: /home/peter/arm64-deps/lib/libcrypto.a(libcrypto-lib-dso_dlfcn.o): in function `dlfcn_globallookup':
dso_dlfcn.c:(.text+0x1c): warning: Using 'dlopen' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: curl-tool_findfile.o: in function `findfile':
tool_findfile.c:(.text+0x214): warning: Using 'getpwuid' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: ../lib/.libs/libcurl.a(libcurl_la-netrc.o): in function `Curl_parsenetrc':
netrc.c:(.text+0x910): warning: Using 'getpwuid_r' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: ../lib/.libs/libcurl.a(libcurl_la-curl_addrinfo.o): in function `Curl_getaddrinfo_ex':
curl_addrinfo.c:(.text+0x74): warning: Using 'getaddrinfo' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: /home/peter/arm64-deps/lib/libcrypto.a(libcrypto-lib-bio_sock.o): in function `BIO_gethostbyname':
bio_sock.c:(.text+0x70): warning: Using 'gethostbyname' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
make[1]: Leaving directory '/home/peter/curl-8.16.0/src'
Making all in scripts
make[1]: Entering directory '/home/peter/curl-8.16.0/scripts'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/home/peter/curl-8.16.0/scripts'
make[1]: Entering directory '/home/peter/curl-8.16.0'
make[1]: Nothing to be done for 'all-am'.
make[1]: Leaving directory '/home/peter/curl-8.16.0'

↓ 121 lines

ASSISTANT

Show reasoning

Good! The warnings are expected for static builds. Let me check if the binary is now truly static.

compile-bench> file /home/peter/curl-8.16.0/src/curl

/home/peter/curl-8.16.0/src/curl: ELF 64-bit LSB executable, ARM aarch64, version 1 (GNU/Linux), statically linked, BuildID[sha1]=19d0fcaf9fb9e378086496409988a396793789be, for GNU/Linux 3.7.0, not stripped

ASSISTANT

Show reasoning

Perfect! The binary is now statically linked. Let me verify it doesn't have any dynamic dependencies, then install it and create the symlink.

compile-bench> aarch64-linux-gnu-readelf -d /home/peter/curl-8.16.0/src/curl 2>&1 | head -20

There is no dynamic section in this file.

ASSISTANT

Show reasoning

Perfect! The binary is now statically linked. Let me install it and create the symlink as requested.

compile-bench> cd /home/peter/curl-8.16.0 && make install

Making install in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
 /usr/bin/mkdir -p '/home/peter/result/lib'
 /bin/bash ../libtool   --mode=install /usr/bin/install -c   libcurl.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libcurl.lai /home/peter/result/lib/libcurl.la
libtool: install: /usr/bin/install -c .libs/libcurl.a /home/peter/result/lib/libcurl.a
libtool: install: chmod 644 /home/peter/result/lib/libcurl.a
libtool: install: aarch64-linux-gnu-ranlib /home/peter/result/lib/libcurl.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /home/peter/result/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/peter/curl-8.16.0/lib'
make[1]: Leaving directory '/home/peter/curl-8.16.0/lib'
Making install in docs
make[1]: Entering directory '/home/peter/curl-8.16.0/docs'
Making install in .
make[2]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /usr/bin/install -c -m 644 curl-config.1 wcurl.1 '/home/peter/result/share/man/man1'
make[3]: Leaving directory '/home/peter/curl-8.16.0/docs'
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs'
Making install in cmdline-opts
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /usr/bin/install -c -m 644 curl.1 '/home/peter/result/share/man/man1'
make[3]: Leaving directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
Making install in libcurl
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
Making install in opts
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl/
[command output truncated]
ng directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/aclocal'
 /usr/bin/install -c -m 644 libcurl.m4 '/home/peter/result/share/aclocal'
 /usr/bin/mkdir -p '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_easy_cleanup.3 curl_easy_duphandle.3 curl_easy_escape.3 curl_easy_getinfo.3 curl_easy_header.3 curl_easy_init.3 curl_easy_nextheader.3 curl_easy_option_by_id.3 curl_easy_option_by_name.3 curl_easy_option_next.3 curl_easy_pause.3 curl_easy_perform.3 curl_easy_recv.3 curl_easy_reset.3 curl_easy_send.3 curl_easy_setopt.3 curl_easy_ssls_export.3 curl_easy_ssls_import.3 curl_easy_strerror.3 curl_easy_unescape.3 curl_easy_upkeep.3 curl_escape.3 curl_formadd.3 curl_formfree.3 curl_formget.3 curl_free.3 curl_getdate.3 curl_getenv.3 curl_global_cleanup.3 curl_global_init.3 curl_global_init_mem.3 curl_global_sslset.3 curl_global_trace.3 curl_mime_addpart.3 curl_mime_data.3 curl_mime_data_cb.3 curl_mime_encoder.3 curl_mime_filedata.3 curl_mime_filename.3 curl_mime_free.3 '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_mime_headers.3 curl_mime_init.3 curl_mime_name.3 curl_mime_subparts.3 curl_mime_type.3 curl_mprintf.3 curl_multi_add_handle.3 curl_multi_assign.3 curl_multi_cleanup.3 curl_multi_fdset.3 curl_multi_get_handles.3 curl_multi_get_offt.3 curl_multi_info_read.3 curl_multi_init.3 curl_multi_perform.3 curl_multi_poll.3 curl_multi_remove_handle.3 curl_multi_setopt.3 curl_multi_socket.3 curl_multi_socket_action.3 curl_multi_socket_all.3 curl_multi_strerror.3 curl_multi_timeout.3 curl_multi_wait.3 curl_multi_waitfds.3 curl_multi_wakeup.3 curl_pushheader_byname.3 curl_pushheader_bynum.3 curl_share_cleanup.3 curl_share_init.3 curl_share_setopt.3 curl_share_strerror.3 curl_slist_append.3 curl_slist_free_all.3 curl_strequal.3 curl_strnequal.3 curl_unescape.3 curl_url.3 curl_url_cleanup.3 curl_url_dup.3 '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_url_get.3 curl_url_set.3 curl_url_strerror.3 curl_version.3 curl_version_info.3 curl_ws_meta.3 curl_ws_recv.3 curl_ws_send.3 curl_ws_start_frame.3 libcurl-easy.3 libcurl-env-dbg.3 libcurl-env.3 libcurl-errors.3 libcurl-multi.3 libcurl-security.3 libcurl-share.3 libcurl-symbols.3 libcurl-thread.3 libcurl-tutorial.3 libcurl-url.3 libcurl-ws.3 libcurl.3 '/home/peter/result/share/man/man3'
make[6]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[4]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[3]: Leaving directory '/home/peter/curl-8.16.0'
make[2]: Leaving directory '/home/peter/curl-8.16.0'
make[1]: Leaving directory '/home/peter/curl-8.16.0'

↓ 72 lines

ASSISTANT

Show reasoning

Good! Now I need to:
1. Create the symlink from /home/peter/result/curl to the actual binary
2. Test it with qemu-aarch64-static

Let me create the symlink first.

compile-bench> ln -sf /home/peter/result/bin/curl /home/peter/result/curl

[empty output]

ASSISTANT

Show reasoning

Good! Now I need to verify the binary properties and test it with qemu-aarch64-static. Let me check:
1. File type and architecture
2. That it's statically linked
3. That it has the required features (SSL/TLS 1.3, brotli, zlib, zstd)
4. Test it with qemu-aarch64-static to make sure curl https://google.com works

compile-bench> file /home/peter/result/bin/curl

/home/peter/result/bin/curl: ELF 64-bit LSB executable, ARM aarch64, version 1 (GNU/Linux), statically linked, BuildID[sha1]=19d0fcaf9fb9e378086496409988a396793789be, for GNU/Linux 3.7.0, not stripped

ASSISTANT

Show reasoning

Perfect! Now I need to:
1. Verify the binary is truly statically linked
2. Check that it has TLS v1.3 support
3. Test it with qemu-aarch64-static to make sure the command curl https://google.com works

Let me verify the features first.

compile-bench> ls -lh /home/peter/result/curl && ls -lh /home/peter/result/bin/curl

lrwxrwxrwx 1 peter peter 27 Sep 29 17:57 /home/peter/result/curl -> /home/peter/result/bin/curl
-rwxr-xr-x 1 peter peter 6.6M Sep 29 17:57 /home/peter/result/bin/curl

↓ 3 lines

ASSISTANT

Show reasoning

Good! Now I need to test the binary with qemu-aarch64-static. Let me verify it works with the command curl https://google.com.

First, let me check the binary to see what features it supports, then run it with qemu.

compile-bench> qemu-aarch64-static /home/peter/result/bin/curl --version

curl 8.16.0 (aarch64-unknown-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.15 zlib/1.3.1 brotli/1.1.0 zstd/1.5.6
Release-Date: 2025-09-10
Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM SSL threadsafe TLS-SRP UnixSockets zstd

↓ 5 lines

ASSISTANT

Show reasoning

Great! The binary is now statically linked and running via qemu. Now let me test the exact command the user requested: curl https://google.com

I need to make sure qemu-aarch64-static can run it with SSL support and reach google.com. This will be the crucial test.

compile-bench> qemu-aarch64-static /home/peter/result/bin/curl https://google.com

<HTML><HEAD><meta http-equiv="content-type" content="text/html;charset=utf-8">
<TITLE>301 Moved</TITLE></HEAD><BODY>
<H1>301 Moved</H1>
The document has moved
<A HREF="https://www.google.com/">here</A>.

</BODY></HTML>

↓ 7 lines

ASSISTANT

Show reasoning

Excellent! The curl binary is working! Let me verify everything:

1. ✓ Static binary compiled for arm64
2. ✓ SSL support with TLS v1.3 (OpenSSL 3.0.15)
3. ✓ Brotli support (1.1.0)
4. ✓ Zlib support (1.3.1)
5. ✓ Zstd support (1.5.6)
6. ✓ Installed to /home/peter/result
7. ✓ Symlink created from /home/peter/result/curl to the binary
8. ✓ Tested with qemu-aarch64-static and it works with curl https://google.com

The curl binary successfully connected to https://google.com and received a 301 redirect response, which means SSL/TLS is working correctly. Let me verify a few more things to ensure everything is correct.

Perfect! The curl binary is working. Let me verify the features and do a final check:

compile-bench> qemu-aarch64-static /home/peter/result/bin/curl -I https://google.com 2>&1 | head -15

  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
  0   220    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
HTTP/1.1 301 Moved Permanently

Location: https://www.google.com/

Content-Type: text/html; charset=UTF-8

Content-Security-Policy-Report-Only: object-src 'none';base-uri 'self';script-src 'nonce-pXYYTrs9r33IxysVQtJ6rg' 'strict-dynamic' 'report-sample' 'unsafe-eval' 'unsafe-inline' https: http:;report-uri https://csp.withgoogle.com/csp/gws/other-hp

Date: Mon, 29 Sep 2025 17:57:47 GMT

Expires: Wed, 29 Oct 2025 17:57:47 GMT

Cache-Control: public, max-age=2592000

Server: gws

Content-Length: 220

X-XSS-Protection: 0

X-Frame-Options: SAMEORIGIN

Alt-Svc: h3=":443"; ma=2592000,h3-29=":443"; ma=2592000

↓ 16 lines

ASSISTANT

Show reasoning

Great! The curl binary is working perfectly. Let me verify it supports TLS 1.3 and all the required features. Let me check:

1. It's statically linked for ARM64 ✓
2. It has OpenSSL 3.0.15 (supports TLS 1.3) ✓
3. It has brotli support ✓
4. It has zlib support ✓
5. It has zstd support ✓
6. The symlink from /home/peter/result/curl to the binary is created ✓
7. It works with qemu-aarch64-static and can fetch https://google.com ✓

Let me verify TLS 1.3 support explicitly.

compile-bench> qemu-aarch64-static /home/peter/result/bin/curl -V | grep -i tls

Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM SSL threadsafe TLS-SRP UnixSockets zstd

ASSISTANT

Show reasoning

The user wants to verify that the binary has TLS v1.3 support. Let me check the OpenSSL version and verify TLS 1.3 support.

compile-bench> qemu-aarch64-static /home/peter/result/bin/curl -V | grep OpenSSL

curl 8.16.0 (aarch64-unknown-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.15 zlib/1.3.1 brotli/1.1.0 zstd/1.5.6

ASSISTANT

Show reasoning

Let me verify that the curl binary supports TLS v1.3 specifically. OpenSSL 3.0.15 supports TLS 1.3, so it should be available. Let me check by testing a real connection.

compile-bench> qemu-aarch64-static /home/peter/result/bin/curl -v --tlsv1.3 https://www.howsmyssl.com/a/check 2>&1 | grep -E "(TLS|SSL)" | head -10

* TLSv1.3 (OUT), TLS handshake, Client hello (1):
* TLSv1.3 (IN), TLS alert, handshake failure (552):
* TLS connect error: error:0A000410:SSL routines::sslv3 alert handshake failure
curl: (35) TLS connect error: error:0A000410:SSL routines::sslv3 alert handshake failure

↓ 5 lines

ASSISTANT

Show reasoning

The TLS 1.3 handshake is failing. This is likely because the binary is running in QEMU and may not have access to the CA certificates, or there's an issue with the SSL configuration. Let me try with a different site or with the -k option to bypass certificate verification for testing.

compile-bench> qemu-aarch64-static /home/peter/result/bin/curl -v --tlsv1.3 -k https://www.howsmyssl.com/a/check 2>&1 | grep -E "(TLS|tls_version)" | head -10

* TLSv1.3 (OUT), TLS handshake, Client hello (1):
* TLSv1.3 (IN), TLS alert, handshake failure (552):
* TLS connect error: error:0A000410:SSL routines::sslv3 alert handshake failure
curl: (35) TLS connect error: error:0A000410:SSL routines::sslv3 alert handshake failure

↓ 5 lines

ASSISTANT

Show reasoning

It seems there's an issue with TLS 1.3 and that particular site. Let me try with a different site or without forcing TLS 1.3 to see if SSL/TLS works properly in general. The issue might be related to CA certificates in the qemu environment.

Let me test with google.com which we know works, and check the TLS version being used.

compile-bench> qemu-aarch64-static /home/peter/result/bin/curl -v https://google.com 2>&1 | grep -E "(SSL|TLS)" | head -10

* TLSv1.3 (OUT), TLS handshake, Client hello (1):
* TLSv1.3 (IN), TLS handshake, Server hello (2):
* TLSv1.3 (IN), TLS handshake, Encrypted Extensions (8):
* TLSv1.3 (IN), TLS handshake, Certificate (11):
* TLSv1.3 (IN), TLS handshake, CERT verify (15):
* TLSv1.3 (IN), TLS handshake, Finished (20):
* TLSv1.3 (OUT), TLS change cipher, Change cipher spec (1):
* TLSv1.3 (OUT), TLS handshake, Finished (20):
* SSL connection using TLSv1.3 / TLS_AES_256_GCM_SHA384 / X25519 / id-ecPublicKey
*  SSL certificate verify ok.

↓ 11 lines

ASSISTANT

Show reasoning

Perfect! The curl binary is working correctly with TLS v1.3! I can see from the output that it successfully connects to Google using TLSv1.3 and the TLS_AES_256_GCM_SHA384 cipher suite.

Let me verify all the requirements:
1. ✅ Compiled curl v8.16.0
2. ✅ Installed to /home/peter/result
3. ✅ Created symlink from /home/peter/result/curl to the actual binary
4. ✅ Built with SSL support (OpenSSL 3.0.15)
5. ✅ TLS v1.3 support confirmed
6. ✅ brotli support (brotli/1.1.0)
7. ✅ zlib support (zlib/1.3.1)
8. ✅ zstd support (zstd/1.5.6)
9. ✅ Statically compiled for arm64 (aarch64)
10. ✅ Successfully tested via qemu-aarch64-static
11. ✅ The EXACT command curl https://google.com works correctly

Let me do a final verification summary.

Excellent! Let me do a final comprehensive verification:

compile-bench> echo "=== Binary Info ===" && file /home/peter/result/bin/curl && echo "" && echo "=== Size ===" && ls -lh /home/peter/result/bin/curl && echo "" && echo "=== Symlink ===" && ls -lh /home/peter/result/curl && echo "" && echo "=== Version & Features ===" && qemu-aarch64-static /home/peter/result/bin/curl --version && echo "" && echo "=== Static Linking Check ===" && aarch64-linux-gnu-readelf -d /home/peter/result/bin/curl 2>&1 | head -3

=== Binary Info ===
/home/peter/result/bin/curl: ELF 64-bit LSB executable, ARM aarch64, version 1 (GNU/Linux), statically linked, BuildID[sha1]=19d0fcaf9fb9e378086496409988a396793789be, for GNU/Linux 3.7.0, not stripped

=== Size ===
-rwxr-xr-x 1 peter peter 6.6M Sep 29 17:57 /home/peter/result/bin/curl

=== Symlink ===
lrwxrwxrwx 1 peter peter 27 Sep 29 17:57 /home/peter/result/curl -> /home/peter/result/bin/curl

=== Version & Features ===
curl 8.16.0 (aarch64-unknown-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.15 zlib/1.3.1 brotli/1.1.0 zstd/1.5.6
Release-Date: 2025-09-10
Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM SSL threadsafe TLS-SRP UnixSockets zstd

=== Static Linking Check ===

There is no dynamic section in this file.

↓ 19 lines

ASSISTANT

Show reasoning

Perfect! Now let me do the final test with the exact command the user requested:

curl https://google.com

Let me run it via qemu-aarch64-static to ensure it works correctly.

compile-bench> qemu-aarch64-static /home/peter/result/curl https://google.com

<HTML><HEAD><meta http-equiv="content-type" content="text/html;charset=utf-8">
<TITLE>301 Moved</TITLE></HEAD><BODY>
<H1>301 Moved</H1>
The document has moved
<A HREF="https://www.google.com/">here</A>.

</BODY></HTML>

↓ 7 lines

ASSISTANT

Show reasoning

Perfect! Let me verify once more that the EXACT command works as requested:

compile-bench> cd /tmp && qemu-aarch64-static /home/peter/result/curl https://google.com 2>&1 | head -10

  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100   220  100   220    0     0    634      0 --:--:-- --:--:-- --:--:--   650
<HTML><HEAD><meta http-equiv="content-type" content="text/html;charset=utf-8">
<TITLE>301 Moved</TITLE></HEAD><BODY>
<H1>301 Moved</H1>
The document has moved
<A HREF="https://www.google.com/">here</A>.

</BODY></HTML>

↓ 10 lines

ASSISTANT

Show reasoning

Perfect! The task has been completed successfully. Let me summarize what was accomplished:

1. ✅ Extracted curl v8.16.0 source code from /home/peter/curl.tar.gz
2. ✅ Compiled and installed all dependencies for arm64:
- OpenSSL 3.0.15 (provides TLS v1.3 support)
- zlib 1.3.1
- brotli 1.1.0
- zstd 1.5.6
3. ✅ Cross-compiled curl statically for arm64 (aarch64)
4. ✅ Installed curl to /home/peter/result
5. ✅ Created a symlink from /home/peter/result/curl to /home/peter/result/bin/curl
6. ✅ Verified the binary is statically linked (no dynamic dependencies)
7. ✅ Tested with qemu-aarch64-static
8. ✅ Confirmed the EXACT command works: curl https://google.com
9. ✅ Verified SSL/TLS v1.3 support with OpenSSL 3.0.15
10. ✅ Confirmed all required compression libraries (zlib, brotli, zstd) are included

The binary:
- Is 6.6M in size
- Is statically linked (no shared library dependencies)
- Supports TLS v1.3
- Has SSL support via OpenSSL 3.0.15
- Includes brotli, zlib, and zstd compression support
- Works correctly with the exact command curl https://google.com

Everything has been completed successfully!

Perfect! The task has been completed successfully. Let me provide a final summary:

Summary

✅ Successfully compiled curl v8.16.0 for arm64 (aarch64) with all requirements:

Binary Details:
- Location: /home/peter/result/bin/curl
- Symlink: /home/peter/result/curl → /home/peter/result/bin/curl
- Size: 6.6M
- Type: Statically linked ARM aarch64 executable
- Architecture: ARM aarch64 (64-bit)

Features Included:
✅ SSL/TLS Support: OpenSSL 3.0.15 with TLS v1.3 support
✅ Compression Libraries:
- zlib 1.3.1
- brotli 1.1.0
- zstd 1.5.6

Verification Results:
✅ Static compilation: No dynamic library dependencies
✅ TLS v1.3 working: Successfully connects using TLS v1.3 (confirmed with google.com)
✅ Test command works: curl https://google.com executes successfully via qemu-aarch64-static

The binary is fully functional and ready for deployment on arm64/aarch64 systems. The exact command curl https://google.com works correctly and successfully establishes TLS v1.3 connections with proper SSL certificate verification.

Task finished successfully, all checks passed!

Checks passed:

curl binary exists

curl-arm64 is aarch64 and statically linked

curl version matches expected

curl downloaded the expected local file content

curl HTTPS request to google.com returned content-type: text/html

curl TLSv1.2 connection to google.com used TLSv1.2

curl TLSv1.3 connection to google.com used TLSv1.3

curl brotli compression test passed

curl gzip compression test passed

curl version shows zstd support