Summary
Performance
| Cost | $0.002 |
| Total elapsed time | 24s |
| LLM inference time | 10s |
| Command execution time | 13s |
| Commands executed | 3 |
All details >
| Attempt ID | g6w5myagubmml | Attempt group | run-16-09-22-05 |
| Revision | fb5c74bd2fee | AWS Instance | m8i.2xlarge |
| Start time | 2025-09-16T20:21:32.749Z | End time | 2025-09-16T20:21:56.769Z |
| Task | jq | Environment | ubuntu-22.04-amd64-offline |
| Model |  gpt-5-mini-minimal | OpenRouter slug | openai/gpt-5-mini |
| Temperature | 1 | Explicit prompt caching | false |
| User msg after tool call | false | Max tool calls | 50 |
| Total timeout seconds | 900 | Single command timeout | 600 |
| Cost | $0.002 | Duration | 24s |
| LLM inference time | 10s | Command execution time | 13s |
| Final context tokens | 2,611 | Total output tokens | 359 |
| Output reasoning tokens | 0 | Messages | 9 |
| Assistant messages | 4 | User messages | 1 |
| System messages | 1 | Commands executed | 3 |
Task
Task: jq
jq 1.8.1 is a command-line JSON utility for viewing and transforming JSON.
Project link: github.com/jqlang/jq
Task:
Compile and install jq to a specific location.
Difficulties:
Standard autotools setup, nothing special.
Environment:
Ubuntu 22.04 on amd64, without internet access.
Execution log
SYSTEM
You are a package-building specialist operating a Ubuntu 22.04 bash shell via one tool: run_terminal_cmd.
The current working directory of every run_terminal_cmd is /home/peter.
Execution rules:
- Always pass non-interactive flags for any command that could prompt (e.g., -y, --yes, DEBIAN_FRONTEND=noninteractive).
- Don't include any newlines in the command.
- The environment is offline, assume you have all the necessary tools already installed.
If you encounter any errors or issues while doing the user's request, you must fix them and continue the task.
At the end verify you did the user request correctly.
USER
You are given jq v1.8.1 source code at jq.tar.gz. Please compile the jq package and install it to /home/peter/result. Create a symlink from /home/peter/result/jq to the actual binary.
ASSISTANT
compile-bench> set -e; pwd; ls -la; tar -tzf jq.tar.gz | head -n 20 /home/peter
total 2004
drwxr-x--- 1 peter peter 4096 Sep 16 20:21 .
drwxr-xr-x 1 root root 4096 Sep 15 11:21 ..
-rw-r--r-- 1 peter peter 220 Jan 6 2022 .bash_logout
-rw-r--r-- 1 peter peter 3771 Jan 6 2022 .bashrc
-rw-r--r-- 1 peter peter 807 Jan 6 2022 .profile
-rw-r--r-- 1 peter peter 2026798 Sep 16 20:21 jq.tar.gz
jq-1.8.1/
jq-1.8.1/jq.1
jq-1.8.1/configure
jq-1.8.1/config/
jq-1.8.1/config/test-driver
jq-1.8.1/config/config.sub
jq-1.8.1/config/ar-lib
jq-1.8.1/config/missing
jq-1.8.1/config/compile
jq-1.8.1/config/ltmain.sh
jq-1.8.1/config/m4/
jq-1.8.1/config/m4/find-func-no-libs2.m4
jq-1.8.1/config/m4/libtool.m4
jq-1.8.1/config/m4/find-func.m4
jq-1.8.1/config/m4/ltoptions.m4
jq-1.8.1/config/m4/ltsugar.m4
jq-1.8.1/config/m4/find-func-no-libs.m4
jq-1.8.1/config/m4/lt~obsolete.m4
jq-1.8.1/config/m4/ltversion.m4
jq-1.8.1/config/m4/misc.m4
↓ 29 lines
compile-bench> set -e; pwd; ls -la; tar -tzf jq.tar.gz | head -n 20
/home/peter total 2004 drwxr-x--- 1 peter peter 4096 Sep 16 20:21 . drwxr-xr-x 1 root root 4096 Sep 15 11:21 .. -rw-r--r-- 1 peter peter 220 Jan 6 2022 .bash_logout -rw-r--r-- 1 peter peter 3771 Jan 6 2022 .bashrc -rw-r--r-- 1 peter peter 807 Jan 6 2022 .profile -rw-r--r-- 1 peter peter 2026798 Sep 16 20:21 jq.tar.gz jq-1.8.1/ jq-1.8.1/jq.1 jq-1.8.1/configure jq-1.8.1/config/ jq-1.8.1/config/test-driver jq-1.8.1/config/config.sub jq-1.8.1/config/ar-lib jq-1.8.1/config/missing jq-1.8.1/config/compile jq-1.8.1/config/ltmain.sh jq-1.8.1/config/m4/ jq-1.8.1/config/m4/find-func-no-libs2.m4 jq-1.8.1/config/m4/libtool.m4 jq-1.8.1/config/m4/find-func.m4 jq-1.8.1/config/m4/ltoptions.m4 jq-1.8.1/config/m4/ltsugar.m4 jq-1.8.1/config/m4/find-func-no-libs.m4 jq-1.8.1/config/m4/lt~obsolete.m4 jq-1.8.1/config/m4/ltversion.m4 jq-1.8.1/config/m4/misc.m4
ASSISTANT
compile-bench> set -e; tar -xzf jq.tar.gz; cd jq-1.8.1; ./configure --prefix=/home/peter/result --disable-maintainer-mode DEBIAN_FRONTEND=noninteractive; make -j$(nproc); make install checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for wchar.h... yes
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking whether make supports nested variables... yes
checking dependency style of gcc... gcc3
checking whether make supports nested variables... (cached) yes
checking for ar... ar
checking the archiver (ar) interface... ar
checking whether to enable maintainer-specific portions of Makefiles... no
checking for gcc... (cached) gcc
checking whether the compiler supports GNU C... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to enable C11 features... (cached) none needed
checking whether gcc understands -c and -o together... (cached) yes
checking how to run the C preprocessor... gcc -E
checking for bison... no
checking for byacc... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking
[command output truncated]
h /home/peter/result/lib src/builtin.lo src/bytecode.lo src/compile.lo src/execute.lo src/jq_test.lo src/jv.lo src/jv_alloc.lo src/jv_aux.lo src/jv_dtoa.lo src/jv_file.lo src/jv_parse.lo src/jv_print.lo src/jv_unicode.lo src/linker.lo src/locfile.lo src/util.lo src/jv_dtoa_tsd.lo vendor/decNumber/decContext.lo vendor/decNumber/decNumber.lo src/lexer.lo src/parser.lo -lm vendor/oniguruma/src/.libs/libonig.la -lpthread )
libtool: install: /usr/bin/install -c .libs/libjq.so.1.0.4T /home/peter/result/lib/libjq.so.1.0.4
libtool: install: (cd /home/peter/result/lib && { ln -s -f libjq.so.1.0.4 libjq.so.1 || { rm -f libjq.so.1 && ln -s libjq.so.1.0.4 libjq.so.1; }; })
libtool: install: (cd /home/peter/result/lib && { ln -s -f libjq.so.1.0.4 libjq.so || { rm -f libjq.so && ln -s libjq.so.1.0.4 libjq.so; }; })
libtool: install: /usr/bin/install -c .libs/libjq.lai /home/peter/result/lib/libjq.la
libtool: install: /usr/bin/install -c .libs/libjq.a /home/peter/result/lib/libjq.a
libtool: install: chmod 644 /home/peter/result/lib/libjq.a
libtool: install: ranlib /home/peter/result/lib/libjq.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
/home/peter/result/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
/usr/bin/mkdir -p '/home/peter/result/bin'
/bin/bash ./libtool --mode=install /usr/bin/install -c jq '/home/peter/result/bin'
libtool: install: /usr/bin/install -c .libs/jq /home/peter/result/bin/jq
/usr/bin/mkdir -p '/home/peter/result/share/doc/jq'
/usr/bin/install -c -m 644 README.md NEWS.md COPYING AUTHORS '/home/peter/result/share/doc/jq'
/usr/bin/mkdir -p '/home/peter/result/include'
/usr/bin/install -c -m 644 src/jv.h src/jq.h '/home/peter/result/include'
/usr/bin/mkdir -p '/home/peter/result/share/man/man1'
/usr/bin/install -c -m 644 jq.1 '/home/peter/result/share/man/man1'
/usr/bin/mkdir -p '/home/peter/result/lib/pkgconfig'
/usr/bin/install -c -m 644 libjq.pc '/home/peter/result/lib/pkgconfig'
make[3]: Leaving directory '/home/peter/jq-1.8.1'
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 106 lines
compile-bench> set -e; tar -xzf jq.tar.gz; cd jq-1.8.1; ./configure --prefix=/home/peter/result --disable-maintainer-mode DEBIAN_FRONTEND=noninteractive; make -j$(nproc); make install
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for wchar.h... yes
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking whether make supports nested variables... yes
checking dependency style of gcc... gcc3
checking whether make supports nested variables... (cached) yes
checking for ar... ar
checking the archiver (ar) interface... ar
checking whether to enable maintainer-specific portions of Makefiles... no
checking for gcc... (cached) gcc
checking whether the compiler supports GNU C... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to enable C11 features... (cached) none needed
checking whether gcc understands -c and -o together... (cached) yes
checking how to run the C preprocessor... gcc -E
checking for bison... no
checking for byacc... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking
[command output truncated]
h /home/peter/result/lib src/builtin.lo src/bytecode.lo src/compile.lo src/execute.lo src/jq_test.lo src/jv.lo src/jv_alloc.lo src/jv_aux.lo src/jv_dtoa.lo src/jv_file.lo src/jv_parse.lo src/jv_print.lo src/jv_unicode.lo src/linker.lo src/locfile.lo src/util.lo src/jv_dtoa_tsd.lo vendor/decNumber/decContext.lo vendor/decNumber/decNumber.lo src/lexer.lo src/parser.lo -lm vendor/oniguruma/src/.libs/libonig.la -lpthread )
libtool: install: /usr/bin/install -c .libs/libjq.so.1.0.4T /home/peter/result/lib/libjq.so.1.0.4
libtool: install: (cd /home/peter/result/lib && { ln -s -f libjq.so.1.0.4 libjq.so.1 || { rm -f libjq.so.1 && ln -s libjq.so.1.0.4 libjq.so.1; }; })
libtool: install: (cd /home/peter/result/lib && { ln -s -f libjq.so.1.0.4 libjq.so || { rm -f libjq.so && ln -s libjq.so.1.0.4 libjq.so; }; })
libtool: install: /usr/bin/install -c .libs/libjq.lai /home/peter/result/lib/libjq.la
libtool: install: /usr/bin/install -c .libs/libjq.a /home/peter/result/lib/libjq.a
libtool: install: chmod 644 /home/peter/result/lib/libjq.a
libtool: install: ranlib /home/peter/result/lib/libjq.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
/home/peter/result/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
/usr/bin/mkdir -p '/home/peter/result/bin'
/bin/bash ./libtool --mode=install /usr/bin/install -c jq '/home/peter/result/bin'
libtool: install: /usr/bin/install -c .libs/jq /home/peter/result/bin/jq
/usr/bin/mkdir -p '/home/peter/result/share/doc/jq'
/usr/bin/install -c -m 644 README.md NEWS.md COPYING AUTHORS '/home/peter/result/share/doc/jq'
/usr/bin/mkdir -p '/home/peter/result/include'
/usr/bin/install -c -m 644 src/jv.h src/jq.h '/home/peter/result/include'
/usr/bin/mkdir -p '/home/peter/result/share/man/man1'
/usr/bin/install -c -m 644 jq.1 '/home/peter/result/share/man/man1'
/usr/bin/mkdir -p '/home/peter/result/lib/pkgconfig'
/usr/bin/install -c -m 644 libjq.pc '/home/peter/result/lib/pkgconfig'
make[3]: Leaving directory '/home/peter/jq-1.8.1'
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
ASSISTANT
compile-bench> set -e; ln -sf /home/peter/result/bin/jq /home/peter/result/jq; ls -la /home/peter/result/bin/jq /home/peter/result/jq; /home/peter/result/jq --version -rwxr-xr-x 1 peter peter 69616 Sep 16 20:21 /home/peter/result/bin/jq
lrwxrwxrwx 1 peter peter 25 Sep 16 20:21 /home/peter/result/jq -> /home/peter/result/bin/jq
jq-1.8.1
↓ 4 lines
compile-bench> set -e; ln -sf /home/peter/result/bin/jq /home/peter/result/jq; ls -la /home/peter/result/bin/jq /home/peter/result/jq; /home/peter/result/jq --version
-rwxr-xr-x 1 peter peter 69616 Sep 16 20:21 /home/peter/result/bin/jq lrwxrwxrwx 1 peter peter 25 Sep 16 20:21 /home/peter/result/jq -> /home/peter/result/bin/jq jq-1.8.1
ASSISTANT
Done — jq was compiled and installed.
What I did:
- Extracted jq-1.8.1 from jq.tar.gz.
- Configured and built it with prefix /home/peter/result (non-interactive).
- Installed files into /home/peter/result.
- Created a symlink /home/peter/result/jq pointing to /home/peter/result/bin/jq.
- Verified the installed binary by running /home/peter/result/jq --version (output: jq-1.8.1).
Files of interest:
/home/peter/result/bin/jq (executable)
/home/peter/result/jq -> /home/peter/result/bin/jq
If you want, I can:
- Add /home/peter/result to your PATH in .bashrc
- Build with different configure options or strip the binary to reduce size.
Task finished successfully, all checks passed!
Checks passed:
jq binary exists
jq help contains expected string
jq works