<- Ranking
Summary
Task
jq-static-musl
Model
gpt-5-codex-high logo
gpt-5-codex-high
Status
Success
Performance
Cost$0.219
Total elapsed time3m14s
LLM inference time2m41s
Command execution time32s
Commands executed31
All details >
Attempt ID f6blahvfwbv2t Attempt group run-23-09-21-48
Revision ad46875d9374 AWS Instance m8i.2xlarge
Start time 2025-09-23T20:06:47.929Z End time 2025-09-23T20:10:02.104Z
Task jq-static-musl Environment ubuntu-22.04-amd64
Model gpt-5-codex-high logo gpt-5-codex-high OpenRouter slug openai/gpt-5-codex
Temperature 1 Explicit prompt caching false
User msg after tool call false Max tool calls 100
Total timeout seconds 1200 Single command timeout 600
Cost $0.219 Duration 3m14s
LLM inference time 2m41s Command execution time 32s
Final context tokens 30,556 Total output tokens 7,840
Output reasoning tokens 6,464 Messages 65
Assistant messages 32 User messages 1
System messages 1 Commands executed 31
Download full attempt result JSON
Task
Task: jq-static-musl

jq 1.8.1 is a command-line JSON utility for viewing and transforming JSON.
Project link: github.com/jqlang/jq

Task:
Compile and install statically-linked jq to a specific location. The binary must use musl C library (not the standard glibc).

Difficulties:
musl toolchain setup, avoiding glibc-only assumptions.

Environment:
Ubuntu 22.04 on amd64, with internet access.

View task page
Execution log
SYSTEM

You are a package-building specialist operating a Ubuntu 22.04 bash shell via one tool: run_terminal_cmd.
The current working directory of every run_terminal_cmd is /home/peter.
Execution rules:
- Always pass non-interactive flags for any command that could prompt (e.g., -y, --yes, DEBIAN_FRONTEND=noninteractive).
- Don't include any newlines in the command.
- You can use sudo.
If you encounter any errors or issues while doing the user's request, you must fix them and continue the task.
At the end verify you did the user request correctly.

USER

You are given jq v1.8.1 source code at /home/peter/jq.tar.gz. Please compile the jq package using musl as the C standard library and install it to /home/peter/result. Create a symlink from /home/peter/result/jq to the compiled jq binary. The binary must be statically linked and must use musl (not glibc).

ASSISTANT
Show reasoning

Preparing to build statically linked jq with musl

I’m planning out how to compile jq from source using musl for static linking on Ubuntu 22.04. This involves installing build dependencies, extracting the tarball, configuring with musl-gcc and static flags, and verifying static linking after build. I’ll ensure commands are composed without newlines and confirm jq’s bundled oniguruma library links statically too. Next, I’ll install all required tools so the build can proceed smoothly.

compile-bench> sudo DEBIAN_FRONTEND=noninteractive apt-get update
0% [Working]
            
Get:1 http://security.ubuntu.com/ubuntu jammy-security InRelease [129 kB]

0% [Connecting to archive.ubuntu.com (185.125.190.81)] [1 InRelease 5484 B/129 
                                                                               
0% [Waiting for headers]
                        
Hit:2 http://archive.ubuntu.com/ubuntu jammy InRelease

                        
0% [Working]
0% [Waiting for headers]
                        
Get:3 http://security.ubuntu.com/ubuntu jammy-security/universe amd64 Packages [1274 kB]

0% [Waiting for headers] [3 Packages 5551 B/1274 kB 0%]
0% [Waiting for headers] [3 Packages 129 kB/1274 kB 10%]
                                                        
Get:4 http://archive.ubuntu.com/ubuntu jammy-updates InRelease [128 kB]

0% [4 InRelease 14.2 kB/128 kB 11%] [3 Packages 347 kB/1274 kB 27%]
                                                                   
0% [4 InRelease 15.6 kB/128 kB 12%]
0% [3 Packages store 0 B] [4 InRelease 15.6 kB/128 kB 12%]
                                                          
Get:5 http://security.ubuntu.com/ubuntu jammy-security/main amd64 Packages [3336 kB]

0% [3 Packages store 0 B] [4 InRelease 15.6 kB/128 kB 12%] [5 Packages 64.9 kB/
                                                                               
0% [4 InRelease 15.6 kB/128 kB 12%] [5 Packages 912 kB/3336 kB 27%]
                                                                   
Get:6 http://security.ubuntu.com/ubuntu jammy-security/multiverse amd64 Packages [71.0 kB]

0% [4 InRelease 35.9 kB/128 kB 28%] [6 Packages 57.3 kB/71.0 kB 81%]
                                                                    
0% [4 InRelease 35.9 kB/128 kB 28%] [Waiting for headers]
                                                         
Get:7 http://security.ubuntu.com/ubuntu jammy-security/restricted amd64 Packages [5526 kB]

0% [4 InRelease 35.9 kB/128 kB 28%] [7 Packages 39.1 kB/5526 kB 1%]
0% [5 Packages store 0 B] [4 InRelease 35.9 kB/128 kB 28%] [7 Packages 49.2 kB/
                                                                               
0% [5 Packages store 0 B] [4 InRelease 47.5 kB/128 kB 37%]
                                                          
0% [4 InRelease 75.0 kB/128 kB 59%]
0% [6 Packages store 0 B] [4 InRelease 75.0 kB/128 kB 59%]
                                                          
0% [4 InRelease 77.9 kB/128 kB 61%]
0% [7 Packages store 0 B] [4 InRelease 77.9 kB/128 kB 61%]
                                                          
0% [7 Packages store 0 B]
0% [7 Packages store 0 B] [Waiting for headers]
                                               
Get:8 http://archive.ubuntu.com/ubuntu jammy-backports InRelease [127 kB]

0% [7 Packages store 0 B] [8 InRelease 2588 B/127 kB 2%]
                                                        
0% [8 InRelease 8380 B/127 kB 7%]
                                 
0% [Working]
57% [Waiting for headers]
                         
Get:9 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 Packages [3681 kB]

57% [9 Packages 2655 B/3681 kB 0%]
                                  
70% [Waiting for headers]
                         
Get:10 http://archive.ubuntu.com/ubuntu jammy-updates/restricted amd64 Packages [5779 kB]

70% [10 Packages 10.6 kB/5779 kB 0%]
70% [9 Packages store 0 B] [10 Packages 10.6 kB/5779 kB 0%]
                                                           
89% [10 Packages 5024 kB/5779 kB 87%]
                                     
Get:11 http://archive.ubuntu.com/ubuntu jammy-updates/multiverse amd64 Packages [69.1 kB]

92% [11 Packages 11.9 kB/69.1 kB 17%]
92% [10 Packages store 0 B] [11 Packages 11.9 kB/69.1 kB 17%]
                                                             
93% [10 Packages store 0 B] [Waiting for headers]
                                                 
Get:12 http://archive.ubuntu.com/ubuntu jammy-updates/universe amd64 Packages [1577 kB]

93% [10 Packages store 0 B] [12 Packages 20.4 kB/1577 kB 1%]
                                                            
98% [10 Packages store 0 B]
                           
99% [Working]
99% [11 Packages store 0 B]
                           
99% [Working]
99% [12 Packages store 0 B]
                           
100% [Working]
              
Fetched 21.7 MB in 2s (13.5 MB/s)

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 3%

Reading package lists... 3%

Reading package lists... 4%

Reading package lists... 4%

Reading package lists... 41%

Reading package lists... 41%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 51%

Reading package lists... 51%

Reading package lists... 67%

Reading package lists... 67%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 81%

Reading package lists... 81%

Reading package lists... 96%

Reading package lists... 96%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... Done
↓ 15 lines
ASSISTANT
Show reasoning

Installing dependencies

compile-bench> sudo DEBIAN_FRONTEND=noninteractive apt-get install -y build-essential autoconf automake libtool flex bison pkg-config musl-tools
Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 3%

Reading package lists... 3%

Reading package lists... 4%

Reading package lists... 4%

Reading package lists... 41%

Reading package lists... 41%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 51%

Reading package lists... 51%

Reading package lists... 67%

Reading package lists... 67%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 81%

Reading package lists... 81%

Reading package lists... 96%

Reading package lists... 96%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... Done


Building dependency tree... 0%

Building dependency tree... 0%

Building dependency tree... 50%

Building dependency tree... 50%

Building dependency tree... Done


Reading state information... 0% 

Reading state information... 1%

Reading state information... Done

build-essential is already the newest version (12.9ubuntu3).
The following additional packages will be installed:
  autotools-dev libfl-dev libfl2 libglib2.0-0 libglib2.0-data libicu70
  libltdl-dev libltdl7 libsigsegv2 libxml2 m4 musl musl-dev shared-mime-info
  xdg-user-dirs
Suggested packages:
  autoconf-archive gnu-standards autoconf-doc gettext bison-doc flex-doc
  libtool-doc gfortran | fortran95-compiler gcj-jdk m4-doc
Recommended packages:
  linux-musl-dev
The following NEW packages will be installed:
  autoconf automake autotools-dev bison flex libfl-dev libfl2 libglib2.0-0
  libglib2.0-data libicu70 libltdl-dev libltdl7 libsigsegv2 libtool libxml2 m4
  musl musl-dev musl-tools pkg-config shared-mime-info xdg-user-dirs
0 upgraded, 22 newly installed, 0 to remove and 5 not upgraded.
Need to get 17.0 MB of archives.
After this operation, 59.8 MB of additional disk space will be used.

0% [Working]
            
Get:1 http://archive.ubuntu.com/ubuntu jammy/main amd64 libsigsegv2 amd64 2.13-1ubuntu3 [14.6 kB]

0% [1 libsigsegv2 14.2 kB/14.6 kB 97%]
                                      
1% [Waiting for headers]
                        
Get:2 http://archive.ubuntu.com/ubuntu jammy/main amd64 m4 amd64 1.4.18-5ubuntu2 [199 kB]

1% [2 m4 2613 B/199 kB 1%]
                          
3% [Waiting for headers]
                        
Get:3 http://archive.ubuntu.com/ubuntu jammy/main amd64 flex amd64 2.6.4-8build2 [307 kB]

3% [3 flex 1870 B/307 kB 1%]
                            
5% [Waiting for headers]
                        
Get:4 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libglib2.0-0 amd64 2.72.4-0ubuntu2.6 [1467 kB]

5% [4 libglib2.0-0 1331 B/1467 kB 0%]
                                     
Get:5 http://
[command output truncated]
l-dev_2.6.4-8build2_amd64.deb ...
Unpacking libfl-dev:amd64 (2.6.4-8build2) ...
Selecting previously unselected package libltdl7:amd64.
Preparing to unpack .../15-libltdl7_2.4.6-15build2_amd64.deb ...
Unpacking libltdl7:amd64 (2.4.6-15build2) ...
Selecting previously unselected package libltdl-dev:amd64.
Preparing to unpack .../16-libltdl-dev_2.4.6-15build2_amd64.deb ...
Unpacking libltdl-dev:amd64 (2.4.6-15build2) ...
Selecting previously unselected package libtool.
Preparing to unpack .../17-libtool_2.4.6-15build2_all.deb ...
Unpacking libtool (2.4.6-15build2) ...
Selecting previously unselected package pkg-config.
Preparing to unpack .../18-pkg-config_0.29.2-1ubuntu3_amd64.deb ...
Unpacking pkg-config (0.29.2-1ubuntu3) ...
Selecting previously unselected package musl:amd64.
Preparing to unpack .../19-musl_1.2.2-4_amd64.deb ...
Unpacking musl:amd64 (1.2.2-4) ...
Selecting previously unselected package musl-dev:amd64.
Preparing to unpack .../20-musl-dev_1.2.2-4_amd64.deb ...
Unpacking musl-dev:amd64 (1.2.2-4) ...
Selecting previously unselected package musl-tools.
Preparing to unpack .../21-musl-tools_1.2.2-4_amd64.deb ...
Unpacking musl-tools (1.2.2-4) ...
Setting up xdg-user-dirs (0.17-2ubuntu4) ...
Setting up libglib2.0-0:amd64 (2.72.4-0ubuntu2.6) ...
No schema files found: doing nothing.
Setting up autotools-dev (20220109.1) ...
Setting up libglib2.0-data (2.72.4-0ubuntu2.6) ...
Setting up libsigsegv2:amd64 (2.13-1ubuntu3) ...
Setting up pkg-config (0.29.2-1ubuntu3) ...
Setting up libfl2:amd64 (2.6.4-8build2) ...
Setting up libltdl7:amd64 (2.4.6-15build2) ...
Setting up musl:amd64 (1.2.2-4) ...
Setting up libicu70:amd64 (70.1-2) ...
Setting up libtool (2.4.6-15build2) ...
Setting up m4 (1.4.18-5ubuntu2) ...
Setting up musl-dev:amd64 (1.2.2-4) ...
Setting up autoconf (2.71-2) ...
Setting up bison (2:3.8.2+dfsg-1build1) ...
update-alternatives: using /usr/bin/bison.yacc to provide /usr/bin/yacc (yacc) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/yacc.1.gz because associated file /usr/share/man/man1/bison.yacc.1.gz (of link group yacc) doesn't exist
Setting up libxml2:amd64 (2.9.13+dfsg-1ubuntu0.9) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/automake.1.gz because associated file /usr/share/man/man1/automake-1.16.1.gz (of link group automake) doesn't exist
update-alternatives: warning: skip creation of /usr/share/man/man1/aclocal.1.gz because associated file /usr/share/man/man1/aclocal-1.16.1.gz (of link group automake) doesn't exist
Setting up flex (2.6.4-8build2) ...
Setting up libfl-dev:amd64 (2.6.4-8build2) ...
Setting up libltdl-dev:amd64 (2.4.6-15build2) ...
Setting up musl-tools (1.2.2-4) ...
Setting up shared-mime-info (2.1-2) ...
Processing triggers for libc-bin (2.35-0ubuntu3.10) ...
↓ 79 lines
ASSISTANT
Show reasoning

Extracting tarball archive

compile-bench> tar xf jq.tar.gz
[empty output]
ASSISTANT
Show reasoning

Listing directory contents

compile-bench> ls
jq-1.8.1  jq.tar.gz
ASSISTANT
Show reasoning

Preparing build configuration

compile-bench> cd jq-1.8.1 && CC=musl-gcc CFLAGS="-O2 -static" LDFLAGS="-static" ./configure --disable-shared --enable-static --with-oniguruma=builtin --prefix=/home/peter/result
checking for gcc... musl-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether musl-gcc accepts -g... yes
checking for musl-gcc option to enable C11 features... none needed
checking whether musl-gcc understands -c and -o together... yes
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for wchar.h... yes
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking whether make supports nested variables... yes
checking dependency style of musl-gcc... gcc3
checking whether make supports nested variables... (cached) yes
checking for ar... ar
checking the archiver (ar) interface... ar
checking whether to enable maintainer-specific portions of Makefiles... no
checking for gcc... (cached) musl-gcc
checking whether the compiler supports GNU C... (cached) yes
checking whether musl-gcc accepts -g... (cached) yes
checking for musl-gcc option to enable C11 features... (cached) none needed
checking whether musl-gcc understands -c and -o together... (cached) yes
checking how to run the C preprocessor... musl-gcc -E
checking for bison... bison -y
checking build system type... x86_64-pc-linux-musl
checking host system type... x86_64-pc-linux-musl
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by musl-gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-musl file names to x86_64-pc-linux-musl format... func_convert_file_noop
checking how to convert x86_64-pc-linux-musl file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
ch
[command output truncated]
ng the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from musl-gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if musl-gcc supports -fno-rtti -fno-exceptions... no
checking for musl-gcc option to produce PIC... -fPIC -DPIC
checking if musl-gcc PIC flag -fPIC -DPIC works... yes
checking if musl-gcc static flag -static works... yes
checking if musl-gcc supports -c -o file.o... yes
checking if musl-gcc supports -c -o file.o... (cached) yes
checking whether the musl-gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... no
checking whether to build static libraries... yes
checking whether make sets $(MAKE)... (cached) yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking for sys/times.h... yes
checking size of int... 4
checking size of long... 8
checking size of long long... 8
checking size of void*... 8
checking for size_t... yes
checking for working alloca.h... yes
checking for alloca... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating test/Makefile
config.status: creating sample/Makefile
config.status: creating onig-config
config.status: creating src/config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default commands
↓ 130 lines
ASSISTANT
Show reasoning

Building and installing the project

compile-bench> cd jq-1.8.1 && make -j$(nproc)
mkdir -p src
mkdir -p src
  GEN      src/builtin.inc
  GEN      src/config_opts.inc
mkdir -p src
  GEN      src/version.h
make  all-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making all in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making all in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make  all-am
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -static -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c -o regparse.lo regparse.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -static -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c -o regcomp.lo regcomp.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -static -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c -o regexec.lo regexec.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -static -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c -o regenc.lo regenc.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -static -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c -o regerror.lo regerror.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -static -MT regext.lo -MD -MP -MF .deps/regext.Tpo -c -o regext.lo regext.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -static -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c -o regsyntax.lo regsyntax.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -static -MT regtrav.lo -MD -MP -MF .deps/regtrav.Tpo -c -o regtrav.lo regtrav.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -O2 -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c regcomp.c -o regcomp.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -O2 -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c regexec.c -o regexec.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -O2 -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c regenc.c -o regenc.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -O2 -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c regerror.c -o regerror.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -O2 -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c regsyntax.c -o regsyntax.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -O2 -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c regparse.c -o regparse.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -O2 -MT regext.lo -MD -MP -MF .deps/regext.Tpo -c regext.c -o regext.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -O2 -MT regtrav.lo -MD -MP -MF .deps/regtrav.Tpo -c regtrav.c -o regtrav.o
mv -f .
[command output truncated]
 sjis.lo sjis_prop.lo iso8859_1.lo iso8859_2.lo iso8859_3.lo iso8859_4.lo iso8859_5.lo iso8859_6.lo iso8859_7.lo iso8859_8.lo iso8859_9.lo iso8859_10.lo iso8859_11.lo iso8859_13.lo iso8859_14.lo iso8859_15.lo iso8859_16.lo euc_tw.lo euc_kr.lo big5.lo gb18030.lo koi8_r.lo cp1251.lo onig_init.lo  
libtool: link: ar cr .libs/libonig.a  regparse.o regcomp.o regexec.o regenc.o regerror.o regext.o regsyntax.o regtrav.o regversion.o st.o reggnu.o unicode.o unicode_unfold_key.o unicode_fold1_key.o unicode_fold2_key.o unicode_fold3_key.o ascii.o utf8.o utf16_be.o utf16_le.o utf32_be.o utf32_le.o euc_jp.o euc_jp_prop.o sjis.o sjis_prop.o iso8859_1.o iso8859_2.o iso8859_3.o iso8859_4.o iso8859_5.o iso8859_6.o iso8859_7.o iso8859_8.o iso8859_9.o iso8859_10.o iso8859_11.o iso8859_13.o iso8859_14.o iso8859_15.o iso8859_16.o euc_tw.o euc_kr.o big5.o gb18030.o koi8_r.o cp1251.o onig_init.o
libtool: link: ranlib .libs/libonig.a
libtool: link: ( cd ".libs" && rm -f "libonig.la" && ln -s "../libonig.la" "libonig.la" )
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making all in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making all in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
sed -e 's,[@]datadir[@],/home/peter/result/share,g' -e 's,[@]datarootdir[@],/home/peter/result/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/home/peter/result,g' -e 's,[@]exec_prefix[@],/home/peter/result,g' -e 's,[@]libdir[@],/home/peter/result/lib,g' -e 's,[@]includedir[@],/home/peter/result/include,g' < ./oniguruma.pc.in > oniguruma.pc
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
  CC       src/builtin.lo
  CC       src/bytecode.lo
  CC       src/compile.lo
  CC       src/execute.lo
  CC       src/jq_test.lo
  CC       src/jv.lo
  CC       src/jv_alloc.lo
  CC       src/jv_aux.lo
  CC       src/jv_dtoa.lo
  CC       src/jv_file.lo
  CC       src/jv_parse.lo
  CC       src/jv_print.lo
  CC       src/jv_unicode.lo
  CC       src/linker.lo
  CC       src/locfile.lo
  CC       src/util.lo
  CC       src/jv_dtoa_tsd.lo
  CC       vendor/decNumber/decContext.lo
  CC       vendor/decNumber/decNumber.lo
  CC       src/lexer.lo
  CC       src/parser.lo
mkdir -p src
  GEN      src/version.h
  CC       src/main.o
  CCLD     libjq.la
  CCLD     jq
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 80 lines
ASSISTANT
Show reasoning

Preparing to run make install

compile-bench> cd jq-1.8.1 && make install
mkdir -p src
  GEN      src/version.h
make  install-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making install in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making install in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
 /usr/bin/mkdir -p '/home/peter/result/lib'
 /bin/bash ../libtool   --mode=install /usr/bin/install -c   libonig.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libonig.lai /home/peter/result/lib/libonig.la
libtool: install: /usr/bin/install -c .libs/libonig.a /home/peter/result/lib/libonig.a
libtool: install: chmod 644 /home/peter/result/lib/libonig.a
libtool: install: ranlib /home/peter/result/lib/libonig.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /home/peter/result/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
 /usr/bin/mkdir -p '/home/peter/result/include'
 /usr/bin/install -c -m 644 oniguruma.h oniggnu.h '/home/peter/result/include'
make  install-data-hook
make[5]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[5]: Nothing to be done for 'install-data-hook'.
make[5]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making install in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making install in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Not
[command output truncated]
p '/home/peter/result/bin'
 /usr/bin/install -c onig-config '/home/peter/result/bin'
 /usr/bin/mkdir -p '/home/peter/result/lib/pkgconfig'
 /usr/bin/install -c -m 644 oniguruma.pc '/home/peter/result/lib/pkgconfig'
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
mkdir -p src
  GEN      src/version.h
  CC       src/main.o
  CCLD     jq
make[3]: Entering directory '/home/peter/jq-1.8.1'
mkdir -p src
  GEN      src/version.h
  CC       src/main.o
  CCLD     jq
 /usr/bin/mkdir -p '/home/peter/result/lib'
 /bin/bash ./libtool   --mode=install /usr/bin/install -c   libjq.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libjq.lai /home/peter/result/lib/libjq.la
libtool: install: /usr/bin/install -c .libs/libjq.a /home/peter/result/lib/libjq.a
libtool: install: chmod 644 /home/peter/result/lib/libjq.a
libtool: install: ranlib /home/peter/result/lib/libjq.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /home/peter/result/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
 /usr/bin/mkdir -p '/home/peter/result/bin'
  /bin/bash ./libtool   --mode=install /usr/bin/install -c jq '/home/peter/result/bin'
libtool: install: /usr/bin/install -c jq /home/peter/result/bin/jq
 /usr/bin/mkdir -p '/home/peter/result/share/doc/jq'
 /usr/bin/install -c -m 644 README.md NEWS.md COPYING AUTHORS '/home/peter/result/share/doc/jq'
 /usr/bin/mkdir -p '/home/peter/result/include'
 /usr/bin/install -c -m 644 src/jv.h src/jq.h '/home/peter/result/include'
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /usr/bin/install -c -m 644 jq.1 '/home/peter/result/share/man/man1'
 /usr/bin/mkdir -p '/home/peter/result/lib/pkgconfig'
 /usr/bin/install -c -m 644 libjq.pc '/home/peter/result/lib/pkgconfig'
make[3]: Leaving directory '/home/peter/jq-1.8.1'
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 112 lines
ASSISTANT
Show reasoning

Creating symbolic link for jq

compile-bench> ln -sf /home/peter/result/bin/jq /home/peter/result/jq
[empty output]
ASSISTANT
Show reasoning

Verifying static musl binary

compile-bench> file /home/peter/result/bin/jq
/home/peter/result/bin/jq: ELF 64-bit LSB pie executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib/ld-musl-x86_64.so.1, with debug_info, not stripped
ASSISTANT
Show reasoning

Analyzing linking and libtool flags

I'll investigate why the final binary is dynamically linked despite setting -static, suspecting libtool or PIE flags override it; I plan to inspect the Makefile and run a verbose build to capture the actual link commands to ensure static linking with musl-gcc.

compile-bench> cd jq-1.8.1 && make clean
Making clean in vendor/oniguruma
make[1]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making clean in src
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
test -z "libonig.la" || rm -f libonig.la
rm -f ./so_locations
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making clean in test
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
 rm -f test_utf8 test_syntax test_options testc testcu test_regset test_back
rm -rf .libs _libs
rm -f *.o
test -z "test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log" || rm -f test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log
test -z "test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs" || rm -f test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making clean in sample
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
 rm -f encode listcap names simple sql syntax user_property callout echo count bug_fix regset scan callback_each_match
rm -rf .libs _libs
rm -f *.o
test -z "encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log" || rm -f encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log
test -z "encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs" || rm -f encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Entering directory '/home/peter/jq-1.8.1'
 rm -f jq
test -z "src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1" || rm -f src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1
test -z "libjq.la " || rm -f libjq.la 
rm -f ./so_locations
rm -rf .libs _libs
rm -rf src/.libs src/_libs
rm -rf vendor/decNumber/.libs vendor/decNumber/_libs
rm -f *.o
rm -f src/*.o
rm -f src/*.lo
rm -f vendor/decNumber/*.o
rm -f vendor/decNumber/*.lo
test -z "tests/mantest.log tests/jqtest.log tests/shtest.log tests/utf8test.log tests/base64test.log tests/uritest.log tests/optionaltest.log tests/onigtest.log tests/manonigtest.log" || rm -f tests/mantest.log tests/jqtest.log tests/shtest.log tests/utf8test.log tests/base64test.log tests/uritest.log tests/optionaltest.log tests/onigtest.log tests/manonigtest.log
test -z "tests/mantest.trs tests/jqtest.trs tests/shtest.trs tests/utf8test.trs tests/base64test.trs tests/uritest.trs tests/optionaltest.trs tests/onigtest.trs tests/manonigtest.trs" || rm -f tests/mantest.trs tests/jqtest.trs tests/shtest.trs tests/utf8test.trs tests/base64test.trs tests/uritest.trs tests/optionaltest.trs tests/onigtest.trs tests/manonigtest.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 54 lines
ASSISTANT
Show reasoning

Preparing to adjust build configuration

compile-bench> cd jq-1.8.1 && grep '^LDFLAGS' src/Makefile
grep: src/Makefile: No such file or directory
ASSISTANT
Show reasoning

Investigating missing Makefile issue

compile-bench> cd jq-1.8.1 && ls
AUTHORS      Makefile.in  config.log     jq.1.prebuilt  m4
COPYING      NEWS.md      config.status  jq.spec        scripts
ChangeLog    README.md    configure      libjq.pc       src
Makefile     aclocal.m4   configure.ac   libjq.pc.in    tests
Makefile.am  config       docs           libtool        vendor
↓ 6 lines
ASSISTANT
Show reasoning

Checking src directory

compile-bench> cd jq-1.8.1 && ls src
builtin.c     inject_errors.c  jv_dtoa.c      jv_unicode.c      locfile.c
builtin.h     jq.h             jv_dtoa.h      jv_unicode.h      locfile.h
builtin.jq    jq_parser.h      jv_dtoa_tsd.c  jv_utf8_tables.h  main.c
bytecode.c    jq_test.c        jv_dtoa_tsd.h  lexer.c           opcode_list.h
bytecode.h    jv.c             jv_file.c      lexer.h           parser.c
compile.c     jv.h             jv_parse.c     lexer.l           parser.h
compile.h     jv_alloc.c       jv_print.c     libm.h            parser.y
exec_stack.h  jv_alloc.h       jv_private.h   linker.c          util.c
execute.c     jv_aux.c         jv_thread.h    linker.h          util.h
↓ 10 lines
ASSISTANT
Show reasoning

Investigating missing Makefile and static build flags

compile-bench> cd jq-1.8.1 && grep '^LDFLAGS' Makefile
LDFLAGS = -static
ASSISTANT
Show reasoning

Analyzing static linking issues with libtool

I’m exploring why the binary built with -static still shows as dynamic, suspecting libtool treats -static differently and might require -all-static to produce a fully static binary. I plan to re-run configure with specific environment flags and inspect the link commands to confirm how libtool manages static linking here.

compile-bench> cd jq-1.8.1 && CC=musl-gcc CFLAGS="-O2" LDFLAGS="-static" LIBS="-static" ./configure --disable-shared --enable-static --with-oniguruma=builtin --prefix=/home/peter/result
checking for gcc... musl-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether musl-gcc accepts -g... yes
checking for musl-gcc option to enable C11 features... none needed
checking whether musl-gcc understands -c and -o together... yes
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for wchar.h... yes
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking whether make supports nested variables... yes
checking dependency style of musl-gcc... gcc3
checking whether make supports nested variables... (cached) yes
checking for ar... ar
checking the archiver (ar) interface... ar
checking whether to enable maintainer-specific portions of Makefiles... no
checking for gcc... (cached) musl-gcc
checking whether the compiler supports GNU C... (cached) yes
checking whether musl-gcc accepts -g... (cached) yes
checking for musl-gcc option to enable C11 features... (cached) none needed
checking whether musl-gcc understands -c and -o together... (cached) yes
checking how to run the C preprocessor... musl-gcc -E
checking for bison... bison -y
checking build system type... x86_64-pc-linux-musl
checking host system type... x86_64-pc-linux-musl
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by musl-gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-musl file names to x86_64-pc-linux-musl format... func_convert_file_noop
checking how to convert x86_64-pc-linux-musl file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
ch
[command output truncated]
ace... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from musl-gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if musl-gcc supports -fno-rtti -fno-exceptions... no
checking for musl-gcc option to produce PIC... -fPIC -DPIC
checking if musl-gcc PIC flag -fPIC -DPIC works... yes
checking if musl-gcc static flag -static works... yes
checking if musl-gcc supports -c -o file.o... yes
checking if musl-gcc supports -c -o file.o... (cached) yes
checking whether the musl-gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... no
checking whether to build static libraries... yes
checking whether make sets $(MAKE)... (cached) yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking for sys/times.h... yes
checking size of int... 4
checking size of long... 8
checking size of long long... 8
checking size of void*... 8
checking for size_t... yes
checking for working alloca.h... yes
checking for alloca... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating test/Makefile
config.status: creating sample/Makefile
config.status: creating onig-config
config.status: creating src/config.h
config.status: src/config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default commands
↓ 131 lines
ASSISTANT
Show reasoning

Preparing to run verbose make command

compile-bench> cd jq-1.8.1 && make V=1 -j$(nproc)
mkdir -p src
mkdir -p src
od -v -A n -t o1 -- src/builtin.jq | \
sed -e 's/$/ /' \
    -e 's/\([0123456789]\) /\1, /g' \
    -e 's/ $//' \
    -e 's/ 0/  0/g' \
    -e 's/ \([123456789]\)/ 0\1/g' > src/builtin.inc
if test -x ./config.status; then \
  ./config.status --config; \
else echo "(unknown)"; \
fi | sed -e 's/\\/\\\\/g' -e 's/"/\\"/g' -e 's/^/"/' -e 's/$/"/' -e 's/^/#define JQ_CONFIG /' > src/config_opts.inc
mkdir -p src
ver="`{ ./scripts/version || echo '1.8.1' ; } | xargs printf '\043define JQ_VERSION \"%s\"\n'`"; echo "$ver" > src/version.h
make  all-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making all in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making all in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make  all-am
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c -o regparse.lo regparse.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c -o regcomp.lo regcomp.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c -o regexec.lo regexec.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c -o regenc.lo regenc.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c -o regerror.lo regerror.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -MT regext.lo -MD -MP -MF .deps/regext.Tpo -c -o regext.lo regext.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c -o regsyntax.lo regsyntax.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -MT regtrav.lo -MD -MP -MF .deps/regtrav.Tpo -c -o regtrav.lo regtrav.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -O2 -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c regparse.c -o regparse.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -O2 -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c regenc.c -o regenc.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -O2 -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c regexec.c -o regexec.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -O2 -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c regcomp.c -o regcomp.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -O2 -MT regtrav.lo -MD -MP -MF .deps/regtrav.Tpo -c regtrav.c -o regtrav.o
libtool: compile:  musl-gcc -DHAVE_CONFI
[command output truncated]
AVE_COSH=1 -DHAVE_DREM=1 -DHAVE_ERF=1 -DHAVE_ERFC=1 -DHAVE_EXP10=1 -DHAVE_EXP2=1 -DHAVE_EXP=1 -DHAVE_EXPM1=1 -DHAVE_FABS=1 -DHAVE_FDIM=1 -DHAVE_FLOOR=1 -DHAVE_FMA=1 -DHAVE_FMAX=1 -DHAVE_FMIN=1 -DHAVE_FMOD=1 -DHAVE_FREXP=1 -DHAVE_HYPOT=1 -DHAVE_J0=1 -DHAVE_J1=1 -DHAVE_JN=1 -DHAVE_LDEXP=1 -DHAVE_LGAMMA=1 -DHAVE_LOG10=1 -DHAVE_LOG1P=1 -DHAVE_LOG2=1 -DHAVE_LOG=1 -DHAVE_LOGB=1 -DHAVE_MODF=1 -DHAVE_LGAMMA_R=1 -DHAVE_NEARBYINT=1 -DHAVE_NEXTAFTER=1 -DHAVE_NEXTTOWARD=1 -DHAVE_POW=1 -DHAVE_REMAINDER=1 -DHAVE_RINT=1 -DHAVE_ROUND=1 -DHAVE_SCALB=1 -DHAVE_SCALBLN=1 -DHAVE_SIGNIFICAND=1 -DHAVE_SCALBN=1 -DHAVE_ILOGB=1 -DHAVE_SIN=1 -DHAVE_SINH=1 -DHAVE_SQRT=1 -DHAVE_TAN=1 -DHAVE_TANH=1 -DHAVE_TGAMMA=1 -DHAVE_TRUNC=1 -DHAVE_Y0=1 -DHAVE_Y1=1 -DHAVE_YN=1 -DHAVE___THREAD=1 -DIEEE_8087=1 -DHAVE_LIBONIG=1 -I. -I./src -I./vendor -Wextra -Wall -Wno-unused-parameter -Wno-unused-function -Woverlength-strings -Wstrict-prototypes -I./vendor/oniguruma/src -O2 -pthread -MT src/parser.lo -MD -MP -MF src/.deps/parser.Tpo -c src/parser.c -o src/parser.o
/bin/bash ./libtool  --tag=CC   --mode=link musl-gcc -Wextra -Wall -Wno-unused-parameter -Wno-unused-function -Woverlength-strings -Wstrict-prototypes     -I./vendor/oniguruma/src -O2 -pthread -L./vendor/oniguruma/src -Wl,-rpath,/home/peter/result/lib -export-symbols-regex '^j[qv]_' -version-info 1:4:0  -static -o libjq.la -rpath /home/peter/result/lib src/builtin.lo src/bytecode.lo src/compile.lo src/execute.lo src/jq_test.lo src/jv.lo src/jv_alloc.lo src/jv_aux.lo src/jv_dtoa.lo src/jv_file.lo src/jv_parse.lo src/jv_print.lo src/jv_unicode.lo src/linker.lo src/locfile.lo src/util.lo src/jv_dtoa_tsd.lo vendor/decNumber/decContext.lo vendor/decNumber/decNumber.lo src/lexer.lo src/parser.lo -lm  vendor/oniguruma/src/.libs/libonig.la -lpthread -static
libtool: link: ar cr .libs/libjq.a  src/builtin.o src/bytecode.o src/compile.o src/execute.o src/jq_test.o src/jv.o src/jv_alloc.o src/jv_aux.o src/jv_dtoa.o src/jv_file.o src/jv_parse.o src/jv_print.o src/jv_unicode.o src/linker.o src/locfile.o src/util.o src/jv_dtoa_tsd.o vendor/decNumber/decContext.o vendor/decNumber/decNumber.o src/lexer.o src/parser.o
libtool: link: ranlib .libs/libjq.a
libtool: link: ( cd ".libs" && rm -f "libjq.la" && ln -s "../libjq.la" "libjq.la" )
/bin/bash ./libtool  --tag=CC   --mode=link musl-gcc -Wextra -Wall -Wno-unused-parameter -Wno-unused-function -Woverlength-strings -Wstrict-prototypes     -I./vendor/oniguruma/src -O2 -pthread  -static -o jq src/main.o libjq.la -lm vendor/oniguruma/src/.libs/libonig.la -lpthread -static
libtool: link: musl-gcc -Wextra -Wall -Wno-unused-parameter -Wno-unused-function -Woverlength-strings -Wstrict-prototypes -I./vendor/oniguruma/src -O2 -o jq src/main.o  ./.libs/libjq.a -L./vendor/oniguruma/src /home/peter/jq-1.8.1/vendor/oniguruma/src/.libs/libonig.a -lm vendor/oniguruma/src/.libs/libonig.a -lpthread -pthread
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 47 lines
ASSISTANT
Show reasoning

Analyzing static linking issues with libtool

compile-bench> cd jq-1.8.1 && sed -n '1,160p' src/Makefile
sed: can't read src/Makefile: No such file or directory
ASSISTANT
Show reasoning

Investigating missing src/Makefile

compile-bench> cd jq-1.8.1 && ls -a src
.                inject_errors.c  jv_dtoa_tsd.lo    libm.h
..               jq.h             jv_dtoa_tsd.o     linker.c
.deps            jq_parser.h      jv_file.c         linker.h
.dirstamp        jq_test.c        jv_file.lo        linker.lo
builtin.c        jq_test.lo       jv_file.o         linker.o
builtin.h        jq_test.o        jv_parse.c        locfile.c
builtin.inc      jv.c             jv_parse.lo       locfile.h
builtin.jq       jv.h             jv_parse.o        locfile.lo
builtin.lo       jv.lo            jv_print.c        locfile.o
builtin.o        jv.o             jv_print.lo       main.c
bytecode.c       jv_alloc.c       jv_print.o        main.o
bytecode.h       jv_alloc.h       jv_private.h      opcode_list.h
bytecode.lo      jv_alloc.lo      jv_thread.h       parser.c
bytecode.o       jv_alloc.o       jv_unicode.c      parser.h
compile.c        jv_aux.c         jv_unicode.h      parser.lo
compile.h        jv_aux.lo        jv_unicode.lo     parser.o
compile.lo       jv_aux.o         jv_unicode.o      parser.y
compile.o        jv_dtoa.c        jv_utf8_tables.h  util.c
config_opts.inc  jv_dtoa.h        lexer.c           util.h
exec_stack.h     jv_dtoa.lo       lexer.h           util.lo
execute.c        jv_dtoa.o        lexer.l           util.o
execute.lo       jv_dtoa_tsd.c    lexer.lo          version.h
execute.o        jv_dtoa_tsd.h    lexer.o
↓ 24 lines
ASSISTANT
Show reasoning

Investigating Makefile and build flags

compile-bench> cd jq-1.8.1 && grep -n "jq_LDFLAGS" -n Makefile
211:	$(jq_LDFLAGS) $(LDFLAGS) -o $@
763:#jq_LDFLAGS = -all-static
↓ 3 lines
ASSISTANT
Show reasoning

Reviewing Makefile context

compile-bench> cd jq-1.8.1 && sed -n '700,780p' Makefile
runstatedir = ${localstatedir}/run
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = .
subdirs =  vendor/oniguruma
sysconfdir = ${prefix}/etc
target_alias = 
top_build_prefix = 
top_builddir = .
top_srcdir = .
LIBJQ_INCS = src/builtin.h src/bytecode.h src/compile.h                 \
        src/exec_stack.h src/jq_parser.h src/jv_alloc.h src/jv_dtoa.h   \
        src/jv_unicode.h src/jv_utf8_tables.h src/lexer.l src/libm.h    \
        src/linker.h src/locfile.h src/opcode_list.h src/parser.y       \
        src/util.h src/jv_dtoa_tsd.h src/jv_thread.h src/jv_private.h   \
        vendor/decNumber/decContext.h vendor/decNumber/decNumber.h      \
        vendor/decNumber/decNumberLocal.h

LIBJQ_SRC = src/builtin.c src/bytecode.c src/compile.c src/execute.c    \
        src/jq_test.c src/jv.c src/jv_alloc.c src/jv_aux.c              \
        src/jv_dtoa.c src/jv_file.c src/jv_parse.c src/jv_print.c       \
        src/jv_unicode.c src/linker.c src/locfile.c src/util.c          \
        src/jv_dtoa_tsd.c                                               \
        vendor/decNumber/decContext.c vendor/decNumber/decNumber.c      \
        ${LIBJQ_INCS}


### C build options
AM_CFLAGS = -Wextra -Wall -Wno-unused-parameter -Wno-unused-function \
	-Woverlength-strings -Wstrict-prototypes $(am__append_1) \
	$(am__append_4) $(am__append_5) $(am__append_6) $(onig_CFLAGS)
ACLOCAL_AMFLAGS = -I config/m4
BUILT_SOURCES = src/builtin.inc src/config_opts.inc src/version.h

### Generating the lexer and parser

# While there is some autoconf macro support for lex/flex, it doesn't support
# header file creation so we'll use good old make
#BUILT_SOURCES = src/lexer.h src/lexer.c src/parser.h src/parser.c \
#                src/builtin.inc src/config_opts.inc src/version.h


# Tell YACC (Bison) autoconf macros that you want a header file created.
# If the --warnings=all fails, you probably have an old version of Bison
# macOS ships an old Bison, so update with Homebrew or MacPorts.
AM_YFLAGS = --warnings=all -Wno-yacc -d

### libjq
lib_LTLIBRARIES = libjq.la $(am__append_7)
libjq_la_SOURCES = ${LIBJQ_SRC}
libjq_la_LIBADD = -lm $(am__append_2) $(am__append_10)
libjq_la_LDFLAGS = $(onig_LDFLAGS) -export-symbols-regex '^j[qv]_' \
	-version-info 1:4:0 $(am__append_3)
include_HEADERS = src/jv.h src/jq.h
AM_CPPFLAGS = -I$(srcdir)/src -I$(srcdir)/vendor
#libinject_errors_la_SOURCES = src/inject_errors.c
#libinject_errors_la_LIBADD = -ldl
#libinject_errors_la_LDFLAGS = -module
generate_ver = ver="`{ $(srcdir)/scripts/version || echo '$(VERSION)' ; } | xargs printf '\043define JQ_VERSION \"%s\"\n'`"
CLEANFILES = src/version.h .remake-version-h src/builtin.inc \
	src/config_opts.inc jq.1
jq_SOURCES = src/main.c
jq_LDADD = libjq.la -lm $(am__append_11)
#jq_LDFLAGS = -all-static

### Tests (make check)
TESTS = tests/mantest tests/jqtest tests/shtest tests/utf8test \
	tests/base64test tests/uritest $(am__append_8) \
	$(am__append_12)
AM_TESTS_ENVIRONMENT = JQ=$(abs_builddir)/jq $(am__append_9)

# This is a magic make variable that causes it to treat tests/man.test as a
# DATA-type dependency for the check target. As a result, it will attempt to
# run any defined targets for tests/man.test as a dependency for check. This
# allows us to ensure that the tests are up-to-date if the manual has been updated
check_DATA = tests/man.test

### Building the manpage

# We build the docs from the manpage yml. If no changes have been made to the
# manpage, then we'll end up using the cached version. Otherwise, we need to
↓ 82 lines
ASSISTANT
Show reasoning

Enabling static linking in Makefile

compile-bench> cd jq-1.8.1 && sed -i 's/^#jq_LDFLAGS = -all-static/jq_LDFLAGS = -all-static/' Makefile
[empty output]
ASSISTANT
Show reasoning

Cleaning build artifacts before install

compile-bench> cd jq-1.8.1 && make clean
Making clean in vendor/oniguruma
make[1]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making clean in src
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
test -z "libonig.la" || rm -f libonig.la
rm -f ./so_locations
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making clean in test
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
 rm -f test_utf8 test_syntax test_options testc testcu test_regset test_back
rm -rf .libs _libs
rm -f *.o
test -z "test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log" || rm -f test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log
test -z "test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs" || rm -f test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making clean in sample
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
 rm -f encode listcap names simple sql syntax user_property callout echo count bug_fix regset scan callback_each_match
rm -rf .libs _libs
rm -f *.o
test -z "encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log" || rm -f encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log
test -z "encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs" || rm -f encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Entering directory '/home/peter/jq-1.8.1'
 rm -f jq
test -z "src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1" || rm -f src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1
test -z "libjq.la " || rm -f libjq.la 
rm -f ./so_locations
rm -rf .libs _libs
rm -rf src/.libs src/_libs
rm -rf vendor/decNumber/.libs vendor/decNumber/_libs
rm -f *.o
rm -f src/*.o
rm -f src/*.lo
rm -f vendor/decNumber/*.o
rm -f vendor/decNumber/*.lo
test -z "tests/mantest.log tests/jqtest.log tests/shtest.log tests/utf8test.log tests/base64test.log tests/uritest.log tests/optionaltest.log tests/onigtest.log tests/manonigtest.log" || rm -f tests/mantest.log tests/jqtest.log tests/shtest.log tests/utf8test.log tests/base64test.log tests/uritest.log tests/optionaltest.log tests/onigtest.log tests/manonigtest.log
test -z "tests/mantest.trs tests/jqtest.trs tests/shtest.trs tests/utf8test.trs tests/base64test.trs tests/uritest.trs tests/optionaltest.trs tests/onigtest.trs tests/manonigtest.trs" || rm -f tests/mantest.trs tests/jqtest.trs tests/shtest.trs tests/utf8test.trs tests/base64test.trs tests/uritest.trs tests/optionaltest.trs tests/onigtest.trs tests/manonigtest.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 54 lines
ASSISTANT
Show reasoning

Recompiling with updated flags

compile-bench> cd jq-1.8.1 && make V=1 -j$(nproc)
mkdir -p src
mkdir -p src
od -v -A n -t o1 -- src/builtin.jq | \
sed -e 's/$/ /' \
    -e 's/\([0123456789]\) /\1, /g' \
    -e 's/ $//' \
    -e 's/ 0/  0/g' \
    -e 's/ \([123456789]\)/ 0\1/g' > src/builtin.inc
if test -x ./config.status; then \
  ./config.status --config; \
else echo "(unknown)"; \
fi | sed -e 's/\\/\\\\/g' -e 's/"/\\"/g' -e 's/^/"/' -e 's/$/"/' -e 's/^/#define JQ_CONFIG /' > src/config_opts.inc
mkdir -p src
ver="`{ ./scripts/version || echo '1.8.1' ; } | xargs printf '\043define JQ_VERSION \"%s\"\n'`"; echo "$ver" > src/version.h
make  all-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making all in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making all in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make  all-am
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c -o regparse.lo regparse.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c -o regcomp.lo regcomp.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c -o regexec.lo regexec.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c -o regenc.lo regenc.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c -o regerror.lo regerror.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -MT regext.lo -MD -MP -MF .deps/regext.Tpo -c -o regext.lo regext.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c -o regsyntax.lo regsyntax.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -MT regtrav.lo -MD -MP -MF .deps/regtrav.Tpo -c -o regtrav.lo regtrav.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -O2 -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c regparse.c -o regparse.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -O2 -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c regenc.c -o regenc.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -O2 -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c regcomp.c -o regcomp.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -O2 -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c regsyntax.c -o regsyntax.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -O2 -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c regexec.c -o regexec.o
libtool: compile:  musl-gcc -DHA
[command output truncated]
REM=1 -DHAVE_ERF=1 -DHAVE_ERFC=1 -DHAVE_EXP10=1 -DHAVE_EXP2=1 -DHAVE_EXP=1 -DHAVE_EXPM1=1 -DHAVE_FABS=1 -DHAVE_FDIM=1 -DHAVE_FLOOR=1 -DHAVE_FMA=1 -DHAVE_FMAX=1 -DHAVE_FMIN=1 -DHAVE_FMOD=1 -DHAVE_FREXP=1 -DHAVE_HYPOT=1 -DHAVE_J0=1 -DHAVE_J1=1 -DHAVE_JN=1 -DHAVE_LDEXP=1 -DHAVE_LGAMMA=1 -DHAVE_LOG10=1 -DHAVE_LOG1P=1 -DHAVE_LOG2=1 -DHAVE_LOG=1 -DHAVE_LOGB=1 -DHAVE_MODF=1 -DHAVE_LGAMMA_R=1 -DHAVE_NEARBYINT=1 -DHAVE_NEXTAFTER=1 -DHAVE_NEXTTOWARD=1 -DHAVE_POW=1 -DHAVE_REMAINDER=1 -DHAVE_RINT=1 -DHAVE_ROUND=1 -DHAVE_SCALB=1 -DHAVE_SCALBLN=1 -DHAVE_SIGNIFICAND=1 -DHAVE_SCALBN=1 -DHAVE_ILOGB=1 -DHAVE_SIN=1 -DHAVE_SINH=1 -DHAVE_SQRT=1 -DHAVE_TAN=1 -DHAVE_TANH=1 -DHAVE_TGAMMA=1 -DHAVE_TRUNC=1 -DHAVE_Y0=1 -DHAVE_Y1=1 -DHAVE_YN=1 -DHAVE___THREAD=1 -DIEEE_8087=1 -DHAVE_LIBONIG=1 -I. -I./src -I./vendor -Wextra -Wall -Wno-unused-parameter -Wno-unused-function -Woverlength-strings -Wstrict-prototypes -I./vendor/oniguruma/src -O2 -pthread -MT src/parser.lo -MD -MP -MF src/.deps/parser.Tpo -c src/parser.c -o src/parser.o
/bin/bash ./libtool  --tag=CC   --mode=link musl-gcc -Wextra -Wall -Wno-unused-parameter -Wno-unused-function -Woverlength-strings -Wstrict-prototypes     -I./vendor/oniguruma/src -O2 -pthread -L./vendor/oniguruma/src -Wl,-rpath,/home/peter/result/lib -export-symbols-regex '^j[qv]_' -version-info 1:4:0  -static -o libjq.la -rpath /home/peter/result/lib src/builtin.lo src/bytecode.lo src/compile.lo src/execute.lo src/jq_test.lo src/jv.lo src/jv_alloc.lo src/jv_aux.lo src/jv_dtoa.lo src/jv_file.lo src/jv_parse.lo src/jv_print.lo src/jv_unicode.lo src/linker.lo src/locfile.lo src/util.lo src/jv_dtoa_tsd.lo vendor/decNumber/decContext.lo vendor/decNumber/decNumber.lo src/lexer.lo src/parser.lo -lm  vendor/oniguruma/src/.libs/libonig.la -lpthread -static
libtool: link: ar cr .libs/libjq.a  src/builtin.o src/bytecode.o src/compile.o src/execute.o src/jq_test.o src/jv.o src/jv_alloc.o src/jv_aux.o src/jv_dtoa.o src/jv_file.o src/jv_parse.o src/jv_print.o src/jv_unicode.o src/linker.o src/locfile.o src/util.o src/jv_dtoa_tsd.o vendor/decNumber/decContext.o vendor/decNumber/decNumber.o src/lexer.o src/parser.o
libtool: link: ranlib .libs/libjq.a
libtool: link: ( cd ".libs" && rm -f "libjq.la" && ln -s "../libjq.la" "libjq.la" )
/bin/bash ./libtool  --tag=CC   --mode=link musl-gcc -Wextra -Wall -Wno-unused-parameter -Wno-unused-function -Woverlength-strings -Wstrict-prototypes     -I./vendor/oniguruma/src -O2 -pthread -all-static -static -o jq src/main.o libjq.la -lm vendor/oniguruma/src/.libs/libonig.la -lpthread -static
libtool: link: musl-gcc -Wextra -Wall -Wno-unused-parameter -Wno-unused-function -Woverlength-strings -Wstrict-prototypes -I./vendor/oniguruma/src -O2 -static -o jq src/main.o  ./.libs/libjq.a -L./vendor/oniguruma/src /home/peter/jq-1.8.1/vendor/oniguruma/src/.libs/libonig.a -lm vendor/oniguruma/src/.libs/libonig.a -lpthread -pthread
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 47 lines
ASSISTANT
Show reasoning

Verifying static binary before install

compile-bench> file /home/peter/jq-1.8.1/jq
/home/peter/jq-1.8.1/jq: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, with debug_info, not stripped
ASSISTANT
Show reasoning

Preparing to install build artifacts

compile-bench> cd jq-1.8.1 && make install
make  install-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making install in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making install in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
 /usr/bin/mkdir -p '/home/peter/result/lib'
 /bin/bash ../libtool   --mode=install /usr/bin/install -c   libonig.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libonig.lai /home/peter/result/lib/libonig.la
libtool: install: /usr/bin/install -c .libs/libonig.a /home/peter/result/lib/libonig.a
libtool: install: chmod 644 /home/peter/result/lib/libonig.a
libtool: install: ranlib /home/peter/result/lib/libonig.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /home/peter/result/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
 /usr/bin/mkdir -p '/home/peter/result/include'
 /usr/bin/install -c -m 644 oniguruma.h oniggnu.h '/home/peter/result/include'
make  install-data-hook
make[5]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[5]: Nothing to be done for 'install-data-hook'.
make[5]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making install in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making install in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.

[command output truncated]

make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
 /usr/bin/mkdir -p '/home/peter/result/bin'
 /usr/bin/install -c onig-config '/home/peter/result/bin'
 /usr/bin/mkdir -p '/home/peter/result/lib/pkgconfig'
 /usr/bin/install -c -m 644 oniguruma.pc '/home/peter/result/lib/pkgconfig'
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
make[3]: Entering directory '/home/peter/jq-1.8.1'
 /usr/bin/mkdir -p '/home/peter/result/lib'
 /bin/bash ./libtool   --mode=install /usr/bin/install -c   libjq.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libjq.lai /home/peter/result/lib/libjq.la
libtool: install: /usr/bin/install -c .libs/libjq.a /home/peter/result/lib/libjq.a
libtool: install: chmod 644 /home/peter/result/lib/libjq.a
libtool: install: ranlib /home/peter/result/lib/libjq.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /home/peter/result/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
 /usr/bin/mkdir -p '/home/peter/result/bin'
  /bin/bash ./libtool   --mode=install /usr/bin/install -c jq '/home/peter/result/bin'
libtool: install: /usr/bin/install -c jq /home/peter/result/bin/jq
 /usr/bin/mkdir -p '/home/peter/result/share/doc/jq'
 /usr/bin/install -c -m 644 README.md NEWS.md COPYING AUTHORS '/home/peter/result/share/doc/jq'
 /usr/bin/mkdir -p '/home/peter/result/include'
 /usr/bin/install -c -m 644 src/jv.h src/jq.h '/home/peter/result/include'
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /usr/bin/install -c -m 644 jq.1 '/home/peter/result/share/man/man1'
 /usr/bin/mkdir -p '/home/peter/result/lib/pkgconfig'
 /usr/bin/install -c -m 644 libjq.pc '/home/peter/result/lib/pkgconfig'
make[3]: Leaving directory '/home/peter/jq-1.8.1'
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 106 lines
ASSISTANT
Show reasoning

Ensuring symlink is correctly set

compile-bench> ln -sf /home/peter/result/bin/jq /home/peter/result/jq
[empty output]
ASSISTANT
Show reasoning

Checking binary linkage and libc usage

compile-bench> file /home/peter/result/bin/jq
/home/peter/result/bin/jq: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, with debug_info, not stripped
ASSISTANT
Show reasoning

Verifying musl usage

compile-bench> strings /home/peter/result/bin/jq | grep -i musl
--disable-shared --enable-static --with-oniguruma=builtin --prefix=/home/peter/result CC=musl-gcc CFLAGS=-O2 LDFLAGS=-static LIBS=-static
MUSL_LOCPATH
/build/musl-kKuXgX/musl-1.2.2
↓ 4 lines
ASSISTANT
Show reasoning

Verifying absence of dynamic linking

compile-bench> ldd /home/peter/result/bin/jq
	not a dynamic executable
ASSISTANT
Show reasoning

Checking symlink details

compile-bench> ls -l /home/peter/result
total 16
drwxr-xr-x 2 peter peter 4096 Sep 23 20:09 bin
drwxr-xr-x 2 peter peter 4096 Sep 23 20:09 include
lrwxrwxrwx 1 peter peter   25 Sep 23 20:09 jq -> /home/peter/result/bin/jq
drwxr-xr-x 3 peter peter 4096 Sep 23 20:09 lib
drwxr-xr-x 4 peter peter 4096 Sep 23 20:07 share
↓ 7 lines
ASSISTANT
Show reasoning

Verifying binary and environment setup

compile-bench> /home/peter/result/bin/jq --version
jq-1.8.1
ASSISTANT
Show reasoning

Preparing final summary message

I'll summarize the key changes including the static build with musl, the symlink handling, the Makefile update for jq_LDFLAGS, and the verification steps using file and ldd to confirm the binary is not dynamically linked. This will neatly wrap up the work done.

Summary:
- Installed required build dependencies including musl tooling.
- Configured jq 1.8.1 with musl-gcc, forcing static linkage and oniguruma builtin support, adjusted jq_LDFLAGS to -all-static to ensure a static executable.
- Built and installed jq into /home/peter/result, then recreated the /home/peter/result/jq symlink to the installed binary.

Verification:
- file /home/peter/result/bin/jq → ELF 64-bit statically linked executable.
- strings /home/peter/result/bin/jq | grep -i musl confirms musl usage.
- ldd /home/peter/result/bin/jq reports “not a dynamic executable”.
- Symlink /home/peter/result/jq correctly points to /home/peter/result/bin/jq.
- Runtime check /home/peter/result/bin/jq --version outputs jq-1.8.1.

Task finished successfully, all checks passed!
Checks passed:
jq binary exists
jq is statically linked
jq binary appears to be linked with musl
jq works