<- Ranking
Summary
Task
jq-windows
Model
claude-sonnet-4.5-thinking-16k logo
claude-sonnet-4.5-thinking-16k
Status
Success
Performance
Cost$0.298
Total elapsed time2m44s
LLM inference time1m56s
Command execution time48s
Commands executed30
All details >
Attempt ID f3wxq4z29zmz1 Attempt group run-29-09-25-19-32
Revision 0cfc533b3f68 AWS Instance m8i.2xlarge
Start time 2025-09-29T18:10:25.596Z End time 2025-09-29T18:13:17.531Z
Task jq-windows Environment ubuntu-22.04-amd64-wine
Model claude-sonnet-4.5-thinking-16k logo claude-sonnet-4.5-thinking-16k OpenRouter slug anthropic/claude-sonnet-4.5
Temperature 1 Explicit prompt caching true
User msg after tool call true Max tool calls 100
Total timeout seconds 2400 Single command timeout 1200
Cost $0.298 Duration 2m44s
LLM inference time 1m56s Command execution time 48s
Final context tokens 28,592 Total output tokens 5,467
Output reasoning tokens 2,289 Messages 56
Assistant messages 24 User messages 1
System messages 1 Commands executed 30
Download full attempt result JSON
Task
Task: jq-windows

jq 1.8.1 is a command-line JSON utility for viewing and transforming JSON.
Project link: github.com/jqlang/jq

Task:
Compile and install jq to a specific location. Cross-compile to Windows, link it statically.

Difficulties:
Cross-compilation to Windows, setting up the cross-compilation toolchain (compilers, etc), making sure that there are no dynamic libraries.

Environment:
Ubuntu 22.04 on amd64, with internet access.

View task page
Execution log
SYSTEM

You are a package-building specialist operating a Ubuntu 22.04 bash shell via one tool: run_terminal_cmd.
The current working directory of every run_terminal_cmd is /home/peter.
Execution rules:
- Always pass non-interactive flags for any command that could prompt (e.g., -y, --yes, DEBIAN_FRONTEND=noninteractive).
- Don't include any newlines in the command.
- You can use sudo.
If you encounter any errors or issues while doing the user's request, you must fix them and continue the task.
At the end verify you did the user request correctly.

USER

You are given jq v1.8.1 source code at jq.tar.gz. Please compile the jq package for amd64 Windows and install it to /home/peter/result/jq.exe. Build it statically.

ASSISTANT
Show reasoning

The user wants me to:
1. Extract the jq v1.8.1 source code from jq.tar.gz
2. Compile it for Windows (amd64)
3. Build it statically
4. Install the resulting executable to /home/peter/result/jq.exe

To cross-compile for Windows on Ubuntu, I'll need to:
1. Extract the source
2. Install the mingw-w64 cross-compiler toolchain
3. Configure and build jq with the cross-compiler
4. Ensure static linking
5. Copy the result to /home/peter/result/jq.exe

Let me start by extracting the archive and seeing what's inside, then install the necessary build tools.

I'll help you compile jq v1.8.1 for Windows (amd64) with static linking. Let me start by extracting the source and setting up the build environment.

compile-bench> tar -tzf jq.tar.gz | head -20
jq-1.8.1/
jq-1.8.1/jq.1
jq-1.8.1/configure
jq-1.8.1/config/
jq-1.8.1/config/test-driver
jq-1.8.1/config/config.sub
jq-1.8.1/config/ar-lib
jq-1.8.1/config/missing
jq-1.8.1/config/compile
jq-1.8.1/config/ltmain.sh
jq-1.8.1/config/m4/
jq-1.8.1/config/m4/find-func-no-libs2.m4
jq-1.8.1/config/m4/libtool.m4
jq-1.8.1/config/m4/find-func.m4
jq-1.8.1/config/m4/ltoptions.m4
jq-1.8.1/config/m4/ltsugar.m4
jq-1.8.1/config/m4/find-func-no-libs.m4
jq-1.8.1/config/m4/lt~obsolete.m4
jq-1.8.1/config/m4/ltversion.m4
jq-1.8.1/config/m4/misc.m4
↓ 21 lines
compile-bench> mkdir -p /home/peter/result
[empty output]
ASSISTANT
Show reasoning

The user wants me to compile jq v1.8.1 for Windows (amd64) from the source code in jq.tar.gz. I need to:

1. Extract the tarball
2. Install a cross-compilation toolchain for Windows (mingw-w64)
3. Configure jq to build for Windows with static linking
4. Compile it
5. Install the resulting jq.exe to /home/peter/result/jq.exe

Let me start by extracting the source and installing the necessary tools.

compile-bench> tar -xzf jq.tar.gz
[empty output]
compile-bench> sudo DEBIAN_FRONTEND=noninteractive apt-get update -y
0% [Working]
            
Get:1 http://security.ubuntu.com/ubuntu jammy-security InRelease [129 kB]

0% [Connecting to archive.ubuntu.com (185.125.190.36)] [1 InRelease 14.2 kB/129
                                                                               
0% [Waiting for headers]
0% [Waiting for headers]
                        
Hit:2 http://archive.ubuntu.com/ubuntu jammy InRelease

0% [Waiting for headers]
                        
Get:3 http://security.ubuntu.com/ubuntu jammy-security/main amd64 Packages [3371 kB]

0% [Waiting for headers] [3 Packages 5551 B/3371 kB 0%]
0% [Waiting for headers] [3 Packages 145 kB/3371 kB 4%]
                                                       
Get:4 http://archive.ubuntu.com/ubuntu jammy-updates InRelease [128 kB]

0% [4 InRelease 9828 B/128 kB 8%] [3 Packages 591 kB/3371 kB 18%]
                                                                 
0% [4 InRelease 15.6 kB/128 kB 12%]
0% [3 Packages store 0 B] [4 InRelease 15.6 kB/128 kB 12%] [Waiting for headers
                                                                               
Get:5 http://security.ubuntu.com/ubuntu jammy-security/universe amd64 Packages [1274 kB]

0% [3 Packages store 0 B] [4 InRelease 18.5 kB/128 kB 14%] [5 Packages 104 kB/1
0% [3 Packages store 0 B] [4 InRelease 21.4 kB/128 kB 17%] [Waiting for headers
                                                                               
Get:6 http://security.ubuntu.com/ubuntu jammy-security/restricted amd64 Packages [5609 kB]

0% [3 Packages store 0 B] [4 InRelease 21.4 kB/128 kB 17%] [6 Packages 74.8 kB/
0% [3 Packages store 0 B] [4 InRelease 33.0 kB/128 kB 26%] [Waiting for headers
                                                                               
Get:7 http://security.ubuntu.com/ubuntu jammy-security/multiverse amd64 Packages [71.0 kB]

0% [3 Packages store 0 B] [4 InRelease 33.0 kB/128 kB 26%] [7 Packages 28.7 kB/
                                                                               
0% [3 Packages store 0 B] [4 InRelease 33.0 kB/128 kB 26%]
                                                          
0% [4 InRelease 47.5 kB/128 kB 37%]
0% [5 Packages store 0 B] [4 InRelease 47.5 kB/128 kB 37%]
                                                          
0% [4 InRelease 62.0 kB/128 kB 48%]
0% [6 Packages store 0 B] [4 InRelease 62.0 kB/128 kB 48%]
                                                          
0% [6 Packages store 0 B]
0% [6 Packages store 0 B] [Waiting for headers]
                                               
0% [Waiting for headers]
0% [7 Packages store 0 B] [Waiting for headers]
                                               
0% [Waiting for headers]
                        
Get:8 http://archive.ubuntu.com/ubuntu jammy-backports InRelease [127 kB]

0% [8 InRelease 2588 B/127 kB 2%]
                                 
0% [Working]
56% [Waiting for headers]
                         
Get:9 http://archive.ubuntu.com/ubuntu jammy-updates/multiverse amd64 Packages [69.1 kB]

56% [9 Packages 2658 B/69.1 kB 4%]
                                  
Get:10 http://archive.ubuntu.com/ubuntu jammy-updates/universe amd64 Packages [1577 kB]

57% [10 Packages 1342 B/1577 kB 0%]
57% [9 Packages store 0 B] [10 Packages 1342 B/1577 kB 0%]
                                                          
57% [10 Packages 7134 B/1577 kB 0%]
                                   
63% [Waiting for headers]
                         
Get:11 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 Packages [3690 kB]

63% [11 Packages 10.7 kB/3690 kB 0%]
63% [10 Packages store 0 B] [11 Packages 10.7 kB/3690 kB 0%]
                                                            
66% [11 Packages 748 kB/3690 kB 20%]
                                    
Get:12 http://archive.ubuntu.com/ubuntu jammy-updates/restricted amd64 Packages [5804 kB]

77% [12 Packages 12.3 kB/5804 kB 0%]
77% [11 Packages store 0 B] [12 Packages 12.3 kB/5804 kB 0%]
                                                            
97% [12 Packages 5219 kB/5804 kB 90%]
                                     
Get:13 http://archive.ubuntu.com/ubuntu jammy-backports/universe amd64 Packages [35.2 kB]

                                     
99% [13 Packages 0 B/35.2 kB 0%]
99% [12 Packages store 0 B] [13 Packages 0 B/35.2 kB 0%]
                                                        
99% [12 Packages store 0 B]
                           
99% [Working]
99% [13 Packages store 0 B]
                           
100% [Working]
              
Fetched 21.9 MB in 2s (13.5 MB/s)

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 3%

Reading package lists... 3%

Reading package lists... 4%

Reading package lists... 4%

Reading package lists... 41%

Reading package lists... 41%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 51%

Reading package lists... 51%

Reading package lists... 67%

Reading package lists... 67%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 80%

Reading package lists... 80%

Reading package lists... 96%

Reading package lists... 96%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... Done
↓ 16 lines
ASSISTANT
Show reasoning

The user wants me to compile jq v1.8.1 for Windows (amd64) with static linking. I need to install the cross-compilation toolchain for Windows. Let me install the necessary packages.

compile-bench> sudo DEBIAN_FRONTEND=noninteractive apt-get install -y mingw-w64 gcc g++ make autoconf automake libtool
Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 3%

Reading package lists... 3%

Reading package lists... 4%

Reading package lists... 4%

Reading package lists... 41%

Reading package lists... 41%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 51%

Reading package lists... 51%

Reading package lists... 67%

Reading package lists... 67%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 80%

Reading package lists... 80%

Reading package lists... 96%

Reading package lists... 96%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... Done


Building dependency tree... 0%

Building dependency tree... 0%

Building dependency tree... 50%

Building dependency tree... 50%

Building dependency tree... Done


Reading state information... 0% 

Reading state information... 0%

Reading state information... Done

g++ is already the newest version (4:11.2.0-1ubuntu1).
g++ set to manually installed.
gcc is already the newest version (4:11.2.0-1ubuntu1).
gcc set to manually installed.
make is already the newest version (4.3-4.1build1).
make set to manually installed.
The following additional packages will be installed:
  autotools-dev binutils-mingw-w64-i686 binutils-mingw-w64-x86-64
  g++-mingw-w64 g++-mingw-w64-i686 g++-mingw-w64-i686-posix
  g++-mingw-w64-i686-win32 g++-mingw-w64-x86-64 g++-mingw-w64-x86-64-posix
  g++-mingw-w64-x86-64-win32 gcc-mingw-w64 gcc-mingw-w64-base
  gcc-mingw-w64-i686 gcc-mingw-w64-i686-posix gcc-mingw-w64-i686-posix-runtime
  gcc-mingw-w64-i686-win32 gcc-mingw-w64-i686-win32-runtime
  gcc-mingw-w64-x86-64 gcc-mingw-w64-x86-64-posix
  gcc-mingw-w64-x86-64-posix-runtime gcc-mingw-w64-x86-64-win32
  gcc-mingw-w64-x86-64-win32-runtime libltdl-dev libsigsegv2 m4
  mingw-w64-common mingw-w64-i686-dev mingw-w64-x86-64-dev
Suggested packages:
  autoconf-archive gnu-standards autoconf-doc gettext gcc-10-locales
  libtool-doc gfortran | fortran95-compiler gcj-jdk m4-doc
The following NEW packages will be installed:
  autoconf automake autotools-dev binutils-mingw-w64-i686
  binutils-mingw-w64-x86-64 g++-mingw-w64 g++-mingw-w64-i686
  g++-mingw-w64-i686-posix g++-mingw-w64-i686-win32 g++-mingw-w64-x86-64
  g++-mingw-w64-x86-64-posix g++-mingw-w64-x86-64-win32 gcc-mingw-w64
  gcc-mingw-w64-base gcc-mingw-w64-i686 gcc-mingw-w64-i686-posix
  gcc-mingw-w64-i686-posix-runtime gcc-mingw-w64-i686-win32
  gcc-mingw-w64-i686-win32-runtime gcc-mingw-w64-x86-64
  gcc-mingw-w64-x86-64-posix gcc-mingw-w64-x86-64-posix-runtime
  gcc-mingw-w64-x86-64-win32 gcc-mingw-w64-x86-64-win32-runtime libltdl-dev
  libsigsegv2 libto
[command output truncated]
/x86_64-w64-mingw32-gcc-posix to provide /usr/bin/x86_64-w64-mingw32-gcc (x86_64-w64-mingw32-gcc) in auto mode
Setting up gcc-mingw-w64-x86-64-win32 (10.3.0-14ubuntu1+24.3) ...
update-alternatives: using /usr/bin/x86_64-w64-mingw32-gcc-win32 to provide /usr/bin/x86_64-w64-mingw32-gcc (x86_64-w64-mingw32-gcc) in auto mode
Setting up gcc-mingw-w64-x86-64 (10.3.0-14ubuntu1+24.3) ...
update-alternatives: warning: forcing reinstallation of alternative /usr/bin/x86_64-w64-mingw32-gcc-win32 because link group x86_64-w64-mingw32-gcc is broken
update-alternatives: warning: skip creation of /usr/bin/x86_64-w64-mingw32-gcc-8 because associated file /usr/bin/x86_64-w64-mingw32-gcc-8.3-win32 (of link group x86_64-w64-mingw32-gcc) doesn't exist
Setting up autoconf (2.71-2) ...
Setting up mingw-w64-i686-dev (8.0.0-1) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/automake.1.gz because associated file /usr/share/man/man1/automake-1.16.1.gz (of link group automake) doesn't exist
update-alternatives: warning: skip creation of /usr/share/man/man1/aclocal.1.gz because associated file /usr/share/man/man1/aclocal-1.16.1.gz (of link group automake) doesn't exist
Setting up gcc-mingw-w64-i686-win32 (10.3.0-14ubuntu1+24.3) ...
update-alternatives: using /usr/bin/i686-w64-mingw32-gcc-win32 to provide /usr/bin/i686-w64-mingw32-gcc (i686-w64-mingw32-gcc) in auto mode
Setting up g++-mingw-w64-i686-win32 (10.3.0-14ubuntu1+24.3) ...
update-alternatives: using /usr/bin/i686-w64-mingw32-g++-win32 to provide /usr/bin/i686-w64-mingw32-g++ (i686-w64-mingw32-g++) in auto mode
Setting up g++-mingw-w64-x86-64-win32 (10.3.0-14ubuntu1+24.3) ...
update-alternatives: using /usr/bin/x86_64-w64-mingw32-g++-win32 to provide /usr/bin/x86_64-w64-mingw32-g++ (x86_64-w64-mingw32-g++) in auto mode
Setting up gcc-mingw-w64-i686-posix (10.3.0-14ubuntu1+24.3) ...
Setting up g++-mingw-w64-x86-64-posix (10.3.0-14ubuntu1+24.3) ...
Setting up gcc-mingw-w64-i686 (10.3.0-14ubuntu1+24.3) ...
update-alternatives: warning: forcing reinstallation of alternative /usr/bin/i686-w64-mingw32-gcc-win32 because link group i686-w64-mingw32-gcc is broken
update-alternatives: warning: skip creation of /usr/bin/i686-w64-mingw32-gcc-8 because associated file /usr/bin/i686-w64-mingw32-gcc-8.3-win32 (of link group i686-w64-mingw32-gcc) doesn't exist
Setting up libltdl-dev:amd64 (2.4.6-15build2) ...
Setting up g++-mingw-w64-x86-64 (10.3.0-14ubuntu1+24.3) ...
Setting up gcc-mingw-w64 (10.3.0-14ubuntu1+24.3) ...
Setting up g++-mingw-w64-i686-posix (10.3.0-14ubuntu1+24.3) ...
Setting up g++-mingw-w64-i686 (10.3.0-14ubuntu1+24.3) ...
Setting up g++-mingw-w64 (10.3.0-14ubuntu1+24.3) ...
Setting up mingw-w64 (8.0.0-1) ...
Processing triggers for libwine:amd64 (6.0.3~repack-1) ...
Processing triggers for libc-bin (2.35-0ubuntu3.10) ...
↓ 68 lines
ASSISTANT
Show reasoning

Good, the MinGW-w64 cross-compiler is installed. Now I need to:
1. Navigate to the jq source directory
2. Configure the build for Windows with static linking
3. Compile it
4. Copy the resulting jq.exe to /home/peter/result/

Let me check what's in the jq directory and how to configure it for cross-compilation.

compile-bench> cd /home/peter/jq-1.8.1 && ls -la
total 1184
drwxr-xr-x 9 peter peter   4096 Jul  1 11:40 .
drwxr-x--- 1 peter peter   4096 Sep 29 18:10 ..
-rw-r--r-- 1 peter peter  10686 Jul  1 11:39 AUTHORS
-rw-r--r-- 1 peter peter   7887 Jul  1 11:39 COPYING
-rw-r--r-- 1 peter peter  33286 Jul  1 11:39 ChangeLog
-rw-r--r-- 1 peter peter   9090 Jul  1 11:39 Makefile.am
-rw-r--r-- 1 peter peter  75461 Jul  1 11:39 Makefile.in
-rw-r--r-- 1 peter peter  24670 Jul  1 11:39 NEWS.md
-rw-r--r-- 1 peter peter   2434 Jul  1 11:39 README.md
-rw-r--r-- 1 peter peter  46459 Jul  1 11:39 aclocal.m4
drwxr-xr-x 3 peter peter   4096 Jul  1 11:40 config
-rwxr-xr-x 1 peter peter 665647 Jul  1 11:39 configure
-rw-r--r-- 1 peter peter   9881 Jul  1 11:39 configure.ac
drwxr-xr-x 5 peter peter   4096 Jul  1 11:40 docs
-rw-r--r-- 1 peter peter 124253 Jul  1 11:39 jq.1
-rw-r--r-- 1 peter peter 124253 Jul  1 11:39 jq.1.prebuilt
-rw-r--r-- 1 peter peter   1431 Jul  1 11:39 jq.spec
-rw-r--r-- 1 peter peter    255 Jul  1 11:39 libjq.pc
-rw-r--r-- 1 peter peter    246 Jul  1 11:39 libjq.pc.in
drwxr-xr-x 2 peter peter   4096 Jul  1 11:40 m4
drwxr-xr-x 2 peter peter   4096 Jul  1 11:40 scripts
drwxr-xr-x 2 peter peter   4096 Jul  1 11:40 src
drwxr-xr-x 4 peter peter   4096 Jul  1 11:40 tests
drwxr-xr-x 4 peter peter   4096 Jul  1 11:40 vendor
↓ 26 lines
ASSISTANT
Show reasoning

Good, the source is extracted. Now I need to configure and build jq for Windows using mingw-w64. Let me check what's needed:

1. I need to configure jq for cross-compilation to Windows
2. The target is x86_64-w64-mingw32 (amd64 Windows)
3. I need to build it statically
4. Install the final jq.exe to /home/peter/result/jq.exe

Let me first check if there are any dependencies I need to handle. jq typically depends on oniguruma for regex support. Let me check the configure options.

compile-bench> cd /home/peter/jq-1.8.1 && ./configure --help | head -50
`configure' configures jq 1.8.1 to adapt to many kinds of systems.

Usage: ./configure [OPTION]... [VAR=VALUE]...

To assign environment variables (e.g., CC, CFLAGS...), specify them as
VAR=VALUE.  See below for descriptions of some of the useful variables.

Defaults for the options are specified in brackets.

Configuration:
  -h, --help              display this help and exit
      --help=short        display options specific to this package
      --help=recursive    display the short help of all the included packages
  -V, --version           display version information and exit
  -q, --quiet, --silent   do not print `checking ...' messages
      --cache-file=FILE   cache test results in FILE [disabled]
  -C, --config-cache      alias for `--cache-file=config.cache'
  -n, --no-create         do not create output files
      --srcdir=DIR        find the sources in DIR [configure dir or `..']

Installation directories:
  --prefix=PREFIX         install architecture-independent files in PREFIX
                          [/usr/local]
  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
                          [PREFIX]

By default, `make install' will install all the files in
`/usr/local/bin', `/usr/local/lib' etc.  You can specify
an installation prefix other than `/usr/local' using `--prefix',
for instance `--prefix=$HOME'.

For better control, use the options below.

Fine tuning of the installation directories:
  --bindir=DIR            user executables [EPREFIX/bin]
  --sbindir=DIR           system admin executables [EPREFIX/sbin]
  --libexecdir=DIR        program executables [EPREFIX/libexec]
  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
  --runstatedir=DIR       modifiable per-process data [LOCALSTATEDIR/run]
  --libdir=DIR            object code libraries [EPREFIX/lib]
  --includedir=DIR        C header files [PREFIX/include]
  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
  --infodir=DIR           info documentation [DATAROOTDIR/info]
  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
  --mandir=DIR            man documentation [DATAROOTDIR/man]
  --docdir=DIR            documentation root [DATAROOTDIR/doc/jq]
↓ 51 lines
ASSISTANT
Show reasoning

Let me continue to understand the configure options and then configure it for Windows cross-compilation with static linking.

compile-bench> cd /home/peter/jq-1.8.1 && ./configure --help | grep -A 20 "Optional Features"
Optional Features:
  --disable-option-checking  ignore unrecognized --enable/--with options
  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
  --enable-dependency-tracking
                          do not reject slow dependency extractors
  --disable-dependency-tracking
                          speeds up one-time build
  --enable-silent-rules   less verbose build output (undo: "make V=1")
  --disable-silent-rules  verbose build output (undo: "make V=0")
  --enable-maintainer-mode
                          enable make rules and dependencies not useful (and
                          sometimes confusing) to the casual installer
  --enable-shared[=PKGS]  build shared libraries [default=yes]
  --enable-static[=PKGS]  build static libraries [default=yes]
  --enable-fast-install[=PKGS]
                          optimize for fast installation [default=yes]
  --disable-libtool-lock  avoid locking (might break parallel builds)
  --disable-largefile     omit support for large files
  --enable-valgrind       enable Valgrind during testing
  --enable-asan           enable address sanitizer
↓ 22 lines
ASSISTANT
Show reasoning

Now I need to configure jq for Windows cross-compilation. I'll need to:
1. Use the mingw-w64 cross-compiler for x86_64 Windows
2. Configure with --host flag to specify the target platform
3. Enable static linking
4. Build jq

Let me start by configuring with the Windows cross-compiler.

compile-bench> cd /home/peter/jq-1.8.1 && ./configure --host=x86_64-w64-mingw32 --enable-static --disable-shared LDFLAGS="-static"
checking for x86_64-w64-mingw32-gcc... x86_64-w64-mingw32-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.exe
checking for suffix of executables... .exe
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether x86_64-w64-mingw32-gcc accepts -g... yes
checking for x86_64-w64-mingw32-gcc option to enable C11 features... none needed
checking whether x86_64-w64-mingw32-gcc understands -c and -o together... yes
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for wchar.h... yes
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for x86_64-w64-mingw32-strip... x86_64-w64-mingw32-strip
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking whether make supports nested variables... yes
checking dependency style of x86_64-w64-mingw32-gcc... gcc3
checking whether make supports nested variables... (cached) yes
checking for x86_64-w64-mingw32-ar... x86_64-w64-mingw32-ar
checking the archiver (x86_64-w64-mingw32-ar) interface... ar
checking whether to enable maintainer-specific portions of Makefiles... no
checking for x86_64-w64-mingw32-gcc... (cached) x86_64-w64-mingw32-gcc
checking whether the compiler supports GNU C... (cached) yes
checking whether x86_64-w64-mingw32-gcc accepts -g... (cached) yes
checking for x86_64-w64-mingw32-gcc option to enable C11 features... (cached) none needed
checking whether x86_64-w64-mingw32-gcc understands -c and -o together... (cached) yes
checking how to run the C preprocessor... x86_64-w64-mingw32-gcc -E
checking for bison... no
checking for byacc... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-w64-mingw32
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by x86_64-w64-mingw32-gcc... /usr/bin/x86_64-w64-mingw32-ld
checking if the linker (/usr/bin/x86_64-w64-mingw32-ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/x86_64-w64-mingw32-nm -B
checking the name lister (/usr/bin/x86_64-w64-mingw32-nm -B) interface... BSD n
[command output truncated]
efixed with host triplet
checking for x86_64-w64-mingw32-objdump... x86_64-w64-mingw32-objdump
checking how to recognize dependent libraries... file_magic ^x86 archive import|^x86 DLL
checking for x86_64-w64-mingw32-dlltool... x86_64-w64-mingw32-dlltool
checking how to associate runtime and link libraries... func_cygming_dll_for_implib
checking for x86_64-w64-mingw32-ar... x86_64-w64-mingw32-ar
checking for archiver @FILE support... @
checking for x86_64-w64-mingw32-strip... (cached) x86_64-w64-mingw32-strip
checking for x86_64-w64-mingw32-ranlib... x86_64-w64-mingw32-ranlib
checking command to parse /usr/bin/x86_64-w64-mingw32-nm -B output from x86_64-w64-mingw32-gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for x86_64-w64-mingw32-mt... no
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... no
checking for objdir... .libs
checking if x86_64-w64-mingw32-gcc supports -fno-rtti -fno-exceptions... no
checking for x86_64-w64-mingw32-gcc option to produce PIC... -DDLL_EXPORT -DPIC
checking if x86_64-w64-mingw32-gcc PIC flag -DDLL_EXPORT -DPIC works... yes
checking if x86_64-w64-mingw32-gcc static flag -static works... yes
checking if x86_64-w64-mingw32-gcc supports -c -o file.o... yes
checking if x86_64-w64-mingw32-gcc supports -c -o file.o... (cached) yes
checking whether the x86_64-w64-mingw32-gcc linker (/usr/bin/x86_64-w64-mingw32-ld) supports shared libraries... yes
checking dynamic linker characteristics... Win32 ld.exe
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... no
checking whether to build static libraries... yes
checking whether make sets $(MAKE)... (cached) yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking for sys/times.h... no
checking size of int... 4
checking size of long... 4
checking size of long long... 8
checking size of void*... 8
checking for size_t... yes
checking for working alloca.h... no
checking for alloca... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating test/Makefile
config.status: creating sample/Makefile
config.status: creating onig-config
config.status: creating src/config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default commands
↓ 120 lines
ASSISTANT
Show reasoning

Great! The configure script ran successfully. Now I need to build jq. Let me run make to compile it.

compile-bench> cd /home/peter/jq-1.8.1 && make -j$(nproc)
mkdir -p src
mkdir -p src
  GEN      src/builtin.inc
  GEN      src/config_opts.inc
mkdir -p src
  GEN      src/version.h
make  all-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making all in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making all in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make  all-am
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c -o regparse.lo regparse.c
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c -o regcomp.lo regcomp.c
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c -o regexec.lo regexec.c
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c -o regenc.lo regenc.c
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c -o regerror.lo regerror.c
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regext.lo -MD -MP -MF .deps/regext.Tpo -c -o regext.lo regext.c
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c -o regsyntax.lo regsyntax.c
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regtrav.lo -MD -MP -MF .deps/regtrav.Tpo -c -o regtrav.lo regtrav.c
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c regparse.c -o regparse.o
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c regcomp.c -o regcomp.o
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c regexec.c -o regexec.o
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c regsyntax.c -o regsyntax.o
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c regerror.c -o regerror.o
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regext.lo -MD -MP -MF .deps/regext.Tpo -c regext.c -o regext.o
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regenc.lo -MD -
[command output truncated]
llowed in x86_64-w64-mingw32 shared libraries; building static only
libtool: link: x86_64-w64-mingw32-ar cr .libs/libonig.a  regparse.o regcomp.o regexec.o regenc.o regerror.o regext.o regsyntax.o regtrav.o regversion.o st.o reggnu.o unicode.o unicode_unfold_key.o unicode_fold1_key.o unicode_fold2_key.o unicode_fold3_key.o ascii.o utf8.o utf16_be.o utf16_le.o utf32_be.o utf32_le.o euc_jp.o euc_jp_prop.o sjis.o sjis_prop.o iso8859_1.o iso8859_2.o iso8859_3.o iso8859_4.o iso8859_5.o iso8859_6.o iso8859_7.o iso8859_8.o iso8859_9.o iso8859_10.o iso8859_11.o iso8859_13.o iso8859_14.o iso8859_15.o iso8859_16.o euc_tw.o euc_kr.o big5.o gb18030.o koi8_r.o cp1251.o onig_init.o
libtool: link: x86_64-w64-mingw32-ranlib .libs/libonig.a
libtool: link: ( cd ".libs" && rm -f "libonig.la" && ln -s "../libonig.la" "libonig.la" )
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making all in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making all in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
sed -e 's,[@]datadir[@],/usr/local/share,g' -e 's,[@]datarootdir[@],/usr/local/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/usr/local,g' -e 's,[@]exec_prefix[@],/usr/local,g' -e 's,[@]libdir[@],/usr/local/lib,g' -e 's,[@]includedir[@],/usr/local/include,g' < ./oniguruma.pc.in > oniguruma.pc
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
  CC       src/builtin.lo
  CC       src/bytecode.lo
  CC       src/compile.lo
  CC       src/execute.lo
  CC       src/jq_test.lo
  CC       src/jv.lo
  CC       src/jv_alloc.lo
  CC       src/jv_aux.lo
  CC       src/jv_dtoa.lo
  CC       src/jv_file.lo
  CC       src/jv_parse.lo
  CC       src/jv_print.lo
  CC       src/jv_unicode.lo
  CC       src/linker.lo
  CC       src/locfile.lo
  CC       src/util.lo
  CC       src/jv_dtoa_tsd.lo
  CC       vendor/decNumber/decContext.lo
  CC       vendor/decNumber/decNumber.lo
  CC       src/lexer.lo
  CC       src/parser.lo
mkdir -p src
  GEN      src/version.h
  CC       src/main.o
src/main.c:21:1: warning: function declaration isn't a prototype [ttps://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wstrict-prototypes-Wstrict-prototypes]8;;]
   21 | extern void jv_tsd_dtoa_ctx_init();
      | ^~~~~~
  CCLD     libjq.la
  CCLD     jq.exe
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 81 lines
ASSISTANT
Show reasoning

Great! The compilation seems to have completed successfully. Now I need to:
1. Find the jq.exe file that was built
2. Verify it's a Windows executable
3. Copy it to /home/peter/result/jq.exe

Let me check if the jq.exe file exists and verify its properties.

compile-bench> find /home/peter/jq-1.8.1 -name "jq.exe" -type f
/home/peter/jq-1.8.1/jq.exe
ASSISTANT
Show reasoning

Great! The build succeeded. Now I need to copy the jq.exe to the result directory and verify that it was built statically.

compile-bench> cp /home/peter/jq-1.8.1/jq.exe /home/peter/result/jq.exe
[empty output]
compile-bench> ls -lh /home/peter/result/jq.exe
-rwxr-xr-x 1 peter peter 4.1M Sep 29 18:11 /home/peter/result/jq.exe
ASSISTANT
Show reasoning

Good! The jq.exe has been compiled and copied to /home/peter/result/jq.exe. Now I need to verify that it was built statically as requested. Let me check if it has any dynamic dependencies using the mingw objdump tool to see what DLLs it might require.

compile-bench> x86_64-w64-mingw32-objdump -p /home/peter/result/jq.exe | grep "DLL Name"
	DLL Name: KERNEL32.dll
	DLL Name: msvcrt.dll
	DLL Name: libwinpthread-1.dll
	DLL Name: SHLWAPI.dll
↓ 5 lines
ASSISTANT
Show reasoning

The executable is still linking to libwinpthread-1.dll dynamically. I need to make it fully static by linking pthread statically as well. Let me rebuild with additional flags to ensure all libraries are statically linked.

I see the build completed, but it's still linking to libwinpthread-1.dll dynamically. Let me rebuild with additional flags to ensure it's fully statically linked.

compile-bench> cd /home/peter/jq-1.8.1 && make clean
Making clean in vendor/oniguruma
make[1]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making clean in src
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
test -z "libonig.la" || rm -f libonig.la
rm -f ./so_locations
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making clean in test
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
 rm -f test_utf8.exe test_syntax.exe test_options.exe testc.exe testcu.exe test_regset.exe test_back.exe
 rm -f test_utf8 test_syntax test_options testc testcu test_regset test_back
rm -rf .libs _libs
rm -f *.o
test -z "test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log" || rm -f test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log
test -z "test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs" || rm -f test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making clean in sample
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
 rm -f encode.exe listcap.exe names.exe simple.exe sql.exe syntax.exe user_property.exe callout.exe echo.exe count.exe bug_fix.exe regset.exe scan.exe callback_each_match.exe
 rm -f encode listcap names simple sql syntax user_property callout echo count bug_fix regset scan callback_each_match
rm -rf .libs _libs
rm -f *.o
test -z "encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log" || rm -f encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log
test -z "encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs" || rm -f encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Entering directory '/home/peter/jq-1.8.1'
 rm -f jq.exe
 rm -f jq
test -z "src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1" || rm -f src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1
test -z "libjq.la " || rm -f libjq.la 
rm -f ./so_locations
rm -rf .libs _libs
rm -rf src/.libs src/_libs
rm -rf vendor/decNumber/.libs vendor/decNumber/_libs
rm -f *.o
rm -f src/*.o
rm -f src/*.lo
rm -f vendor/decNumber/*.o
rm -f vendor/decNumber/*.lo
test -z "tests/mantest.log tests/jqtest.log tests/shtest.log tests/utf8test.log tests/base64test.log tests/uritest.log tests/onigtest.log tests/manonigtest.log" || rm -f tests/mantest.log tests/jqtest.log tests/shtest.log tests/utf8test.log tests/base64test.log tests/uritest.log tests/onigtest.log tests/manonigtest.log
test -z "tests/mantest.trs tests/jqtest.trs tests/shtest.trs tests/utf8test.trs tests/base64test.trs tests/uritest.trs tests/onigtest.trs tests/manonigtest.trs" || rm -f tests/mantest.trs tests/jqtest.trs tests/shtest.trs tests/utf8test.trs tests/base64test.trs tests/uritest.trs tests/onigtest.trs tests/manonigtest.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 57 lines
ASSISTANT
Show reasoning

The build is not fully static because it's still linking to libwinpthread-1.dll. I need to reconfigure with additional flags to make it completely static. Let me reconfigure with -static-libgcc and -static flags.

compile-bench> cd /home/peter/jq-1.8.1 && ./configure --host=x86_64-w64-mingw32 --enable-static --disable-shared LDFLAGS="-static -static-libgcc -static-libstdc++ -pthread" CFLAGS="-O2"
checking for x86_64-w64-mingw32-gcc... x86_64-w64-mingw32-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.exe
checking for suffix of executables... .exe
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether x86_64-w64-mingw32-gcc accepts -g... yes
checking for x86_64-w64-mingw32-gcc option to enable C11 features... none needed
checking whether x86_64-w64-mingw32-gcc understands -c and -o together... yes
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for wchar.h... yes
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for x86_64-w64-mingw32-strip... x86_64-w64-mingw32-strip
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking whether make supports nested variables... yes
checking dependency style of x86_64-w64-mingw32-gcc... gcc3
checking whether make supports nested variables... (cached) yes
checking for x86_64-w64-mingw32-ar... x86_64-w64-mingw32-ar
checking the archiver (x86_64-w64-mingw32-ar) interface... ar
checking whether to enable maintainer-specific portions of Makefiles... no
checking for x86_64-w64-mingw32-gcc... (cached) x86_64-w64-mingw32-gcc
checking whether the compiler supports GNU C... (cached) yes
checking whether x86_64-w64-mingw32-gcc accepts -g... (cached) yes
checking for x86_64-w64-mingw32-gcc option to enable C11 features... (cached) none needed
checking whether x86_64-w64-mingw32-gcc understands -c and -o together... (cached) yes
checking how to run the C preprocessor... x86_64-w64-mingw32-gcc -E
checking for bison... no
checking for byacc... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-w64-mingw32
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by x86_64-w64-mingw32-gcc... /usr/bin/x86_64-w64-mingw32-ld
checking if the linker (/usr/bin/x86_64-w64-mingw32-ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/x86_64-w64-mingw32-nm -B
checking the name lister (/usr/bin/x86_64-w64-mingw32-nm -B) interface... BSD n
[command output truncated]
_64-w64-mingw32-objdump... x86_64-w64-mingw32-objdump
checking how to recognize dependent libraries... file_magic ^x86 archive import|^x86 DLL
checking for x86_64-w64-mingw32-dlltool... x86_64-w64-mingw32-dlltool
checking how to associate runtime and link libraries... func_cygming_dll_for_implib
checking for x86_64-w64-mingw32-ar... x86_64-w64-mingw32-ar
checking for archiver @FILE support... @
checking for x86_64-w64-mingw32-strip... (cached) x86_64-w64-mingw32-strip
checking for x86_64-w64-mingw32-ranlib... x86_64-w64-mingw32-ranlib
checking command to parse /usr/bin/x86_64-w64-mingw32-nm -B output from x86_64-w64-mingw32-gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for x86_64-w64-mingw32-mt... no
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... no
checking for objdir... .libs
checking if x86_64-w64-mingw32-gcc supports -fno-rtti -fno-exceptions... no
checking for x86_64-w64-mingw32-gcc option to produce PIC... -DDLL_EXPORT -DPIC
checking if x86_64-w64-mingw32-gcc PIC flag -DDLL_EXPORT -DPIC works... yes
checking if x86_64-w64-mingw32-gcc static flag -static works... yes
checking if x86_64-w64-mingw32-gcc supports -c -o file.o... yes
checking if x86_64-w64-mingw32-gcc supports -c -o file.o... (cached) yes
checking whether the x86_64-w64-mingw32-gcc linker (/usr/bin/x86_64-w64-mingw32-ld) supports shared libraries... yes
checking dynamic linker characteristics... Win32 ld.exe
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... no
checking whether to build static libraries... yes
checking whether make sets $(MAKE)... (cached) yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking for sys/times.h... no
checking size of int... 4
checking size of long... 4
checking size of long long... 8
checking size of void*... 8
checking for size_t... yes
checking for working alloca.h... no
checking for alloca... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating test/Makefile
config.status: creating sample/Makefile
config.status: creating onig-config
config.status: creating src/config.h
config.status: src/config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default commands
↓ 120 lines
ASSISTANT
Show reasoning

The configure completed successfully with static linking flags. Now I need to rebuild the project with make.

compile-bench> cd /home/peter/jq-1.8.1 && make -j$(nproc)
mkdir -p src
mkdir -p src
  GEN      src/builtin.inc
  GEN      src/config_opts.inc
mkdir -p src
  GEN      src/version.h
make  all-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making all in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making all in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make  all-am
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c -o regparse.lo regparse.c
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c -o regcomp.lo regcomp.c
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c -o regexec.lo regexec.c
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c -o regenc.lo regenc.c
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c -o regerror.lo regerror.c
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -MT regext.lo -MD -MP -MF .deps/regext.Tpo -c -o regext.lo regext.c
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c -o regsyntax.lo regsyntax.c
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -O2 -MT regtrav.lo -MD -MP -MF .deps/regtrav.Tpo -c -o regtrav.lo regtrav.c
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -O2 -MT regext.lo -MD -MP -MF .deps/regext.Tpo -c regext.c -o regext.o
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -O2 -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c regcomp.c -o regcomp.o
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -O2 -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c regparse.c -o regparse.o
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -O2 -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c regexec.c -o regexec.o
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -O2 -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c regsyntax.c -o regsyntax.o
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -O2 -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c regerror.c -o regerror.o
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -O2 -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c regenc.c -o regenc
[command output truncated]
undefined symbols not allowed in x86_64-w64-mingw32 shared libraries; building static only
libtool: link: x86_64-w64-mingw32-ar cr .libs/libonig.a  regparse.o regcomp.o regexec.o regenc.o regerror.o regext.o regsyntax.o regtrav.o regversion.o st.o reggnu.o unicode.o unicode_unfold_key.o unicode_fold1_key.o unicode_fold2_key.o unicode_fold3_key.o ascii.o utf8.o utf16_be.o utf16_le.o utf32_be.o utf32_le.o euc_jp.o euc_jp_prop.o sjis.o sjis_prop.o iso8859_1.o iso8859_2.o iso8859_3.o iso8859_4.o iso8859_5.o iso8859_6.o iso8859_7.o iso8859_8.o iso8859_9.o iso8859_10.o iso8859_11.o iso8859_13.o iso8859_14.o iso8859_15.o iso8859_16.o euc_tw.o euc_kr.o big5.o gb18030.o koi8_r.o cp1251.o onig_init.o
libtool: link: x86_64-w64-mingw32-ranlib .libs/libonig.a
libtool: link: ( cd ".libs" && rm -f "libonig.la" && ln -s "../libonig.la" "libonig.la" )
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making all in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making all in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
sed -e 's,[@]datadir[@],/usr/local/share,g' -e 's,[@]datarootdir[@],/usr/local/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/usr/local,g' -e 's,[@]exec_prefix[@],/usr/local,g' -e 's,[@]libdir[@],/usr/local/lib,g' -e 's,[@]includedir[@],/usr/local/include,g' < ./oniguruma.pc.in > oniguruma.pc
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
  CC       src/builtin.lo
  CC       src/bytecode.lo
  CC       src/compile.lo
  CC       src/execute.lo
  CC       src/jq_test.lo
  CC       src/jv.lo
  CC       src/jv_alloc.lo
  CC       src/jv_aux.lo
  CC       src/jv_dtoa.lo
  CC       src/jv_file.lo
  CC       src/jv_parse.lo
  CC       src/jv_print.lo
  CC       src/jv_unicode.lo
  CC       src/linker.lo
  CC       src/locfile.lo
  CC       src/util.lo
  CC       src/jv_dtoa_tsd.lo
  CC       vendor/decNumber/decContext.lo
  CC       vendor/decNumber/decNumber.lo
  CC       src/lexer.lo
  CC       src/parser.lo
  GEN      jq.1
  CC       src/main.o
src/main.c:21:1: warning: function declaration isn't a prototype [ttps://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wstrict-prototypes-Wstrict-prototypes]8;;]
   21 | extern void jv_tsd_dtoa_ctx_init();
      | ^~~~~~
  CCLD     libjq.la
  CCLD     jq.exe
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 80 lines
ASSISTANT
Show reasoning

The build completed successfully. Now let me check if the executable is fully statically linked by checking the DLL dependencies again.

compile-bench> cp /home/peter/jq-1.8.1/jq.exe /home/peter/result/jq.exe
[empty output]
compile-bench> x86_64-w64-mingw32-objdump -p /home/peter/result/jq.exe | grep "DLL Name"
	DLL Name: KERNEL32.dll
	DLL Name: msvcrt.dll
	DLL Name: libwinpthread-1.dll
	DLL Name: SHLWAPI.dll
↓ 5 lines
ASSISTANT
Show reasoning

The binary is still linking to libwinpthread-1.dll dynamically. I need to make it fully static. Let me try a different approach - I'll use the -Wl,-Bstatic flag to force static linking of all libraries including pthread.

Let me rebuild with a different approach to ensure fully static linking, including the pthread library:

compile-bench> cd /home/peter/jq-1.8.1 && make clean
Making clean in vendor/oniguruma
make[1]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making clean in src
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
test -z "libonig.la" || rm -f libonig.la
rm -f ./so_locations
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making clean in test
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
 rm -f test_utf8.exe test_syntax.exe test_options.exe testc.exe testcu.exe test_regset.exe test_back.exe
 rm -f test_utf8 test_syntax test_options testc testcu test_regset test_back
rm -rf .libs _libs
rm -f *.o
test -z "test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log" || rm -f test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log
test -z "test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs" || rm -f test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making clean in sample
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
 rm -f encode.exe listcap.exe names.exe simple.exe sql.exe syntax.exe user_property.exe callout.exe echo.exe count.exe bug_fix.exe regset.exe scan.exe callback_each_match.exe
 rm -f encode listcap names simple sql syntax user_property callout echo count bug_fix regset scan callback_each_match
rm -rf .libs _libs
rm -f *.o
test -z "encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log" || rm -f encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log
test -z "encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs" || rm -f encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Entering directory '/home/peter/jq-1.8.1'
 rm -f jq.exe
 rm -f jq
test -z "src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1" || rm -f src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1
test -z "libjq.la " || rm -f libjq.la 
rm -f ./so_locations
rm -rf .libs _libs
rm -rf src/.libs src/_libs
rm -rf vendor/decNumber/.libs vendor/decNumber/_libs
rm -f *.o
rm -f src/*.o
rm -f src/*.lo
rm -f vendor/decNumber/*.o
rm -f vendor/decNumber/*.lo
test -z "tests/mantest.log tests/jqtest.log tests/shtest.log tests/utf8test.log tests/base64test.log tests/uritest.log tests/onigtest.log tests/manonigtest.log" || rm -f tests/mantest.log tests/jqtest.log tests/shtest.log tests/utf8test.log tests/base64test.log tests/uritest.log tests/onigtest.log tests/manonigtest.log
test -z "tests/mantest.trs tests/jqtest.trs tests/shtest.trs tests/utf8test.trs tests/base64test.trs tests/uritest.trs tests/onigtest.trs tests/manonigtest.trs" || rm -f tests/mantest.trs tests/jqtest.trs tests/shtest.trs tests/utf8test.trs tests/base64test.trs tests/uritest.trs tests/onigtest.trs tests/manonigtest.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 57 lines
ASSISTANT
Show reasoning

The issue is that libwinpthread-1.dll is still being linked dynamically. I need to use the -Wl,--whole-archive flag or specify -Wl,-Bstatic to ensure static linking of all libraries including pthread. Let me try a different approach with more specific linker flags.

compile-bench> cd /home/peter/jq-1.8.1 && ./configure --host=x86_64-w64-mingw32 --enable-static --disable-shared LDFLAGS="-static -Wl,-Bstatic -lpthread" CFLAGS="-O2"
checking for x86_64-w64-mingw32-gcc... x86_64-w64-mingw32-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.exe
checking for suffix of executables... .exe
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether x86_64-w64-mingw32-gcc accepts -g... yes
checking for x86_64-w64-mingw32-gcc option to enable C11 features... none needed
checking whether x86_64-w64-mingw32-gcc understands -c and -o together... yes
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for wchar.h... yes
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for x86_64-w64-mingw32-strip... x86_64-w64-mingw32-strip
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking whether make supports nested variables... yes
checking dependency style of x86_64-w64-mingw32-gcc... gcc3
checking whether make supports nested variables... (cached) yes
checking for x86_64-w64-mingw32-ar... x86_64-w64-mingw32-ar
checking the archiver (x86_64-w64-mingw32-ar) interface... ar
checking whether to enable maintainer-specific portions of Makefiles... no
checking for x86_64-w64-mingw32-gcc... (cached) x86_64-w64-mingw32-gcc
checking whether the compiler supports GNU C... (cached) yes
checking whether x86_64-w64-mingw32-gcc accepts -g... (cached) yes
checking for x86_64-w64-mingw32-gcc option to enable C11 features... (cached) none needed
checking whether x86_64-w64-mingw32-gcc understands -c and -o together... (cached) yes
checking how to run the C preprocessor... x86_64-w64-mingw32-gcc -E
checking for bison... no
checking for byacc... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-w64-mingw32
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by x86_64-w64-mingw32-gcc... /usr/bin/x86_64-w64-mingw32-ld
checking if the linker (/usr/bin/x86_64-w64-mingw32-ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/x86_64-w64-mingw32-nm -B
checking the name lister (/usr/bin/x86_64-w64-mingw32-nm -B) interface... BSD n
[command output truncated]
_64-w64-mingw32-objdump... x86_64-w64-mingw32-objdump
checking how to recognize dependent libraries... file_magic ^x86 archive import|^x86 DLL
checking for x86_64-w64-mingw32-dlltool... x86_64-w64-mingw32-dlltool
checking how to associate runtime and link libraries... func_cygming_dll_for_implib
checking for x86_64-w64-mingw32-ar... x86_64-w64-mingw32-ar
checking for archiver @FILE support... @
checking for x86_64-w64-mingw32-strip... (cached) x86_64-w64-mingw32-strip
checking for x86_64-w64-mingw32-ranlib... x86_64-w64-mingw32-ranlib
checking command to parse /usr/bin/x86_64-w64-mingw32-nm -B output from x86_64-w64-mingw32-gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for x86_64-w64-mingw32-mt... no
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... no
checking for objdir... .libs
checking if x86_64-w64-mingw32-gcc supports -fno-rtti -fno-exceptions... no
checking for x86_64-w64-mingw32-gcc option to produce PIC... -DDLL_EXPORT -DPIC
checking if x86_64-w64-mingw32-gcc PIC flag -DDLL_EXPORT -DPIC works... yes
checking if x86_64-w64-mingw32-gcc static flag -static works... yes
checking if x86_64-w64-mingw32-gcc supports -c -o file.o... yes
checking if x86_64-w64-mingw32-gcc supports -c -o file.o... (cached) yes
checking whether the x86_64-w64-mingw32-gcc linker (/usr/bin/x86_64-w64-mingw32-ld) supports shared libraries... yes
checking dynamic linker characteristics... Win32 ld.exe
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... no
checking whether to build static libraries... yes
checking whether make sets $(MAKE)... (cached) yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking for sys/times.h... no
checking size of int... 4
checking size of long... 4
checking size of long long... 8
checking size of void*... 8
checking for size_t... yes
checking for working alloca.h... no
checking for alloca... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating test/Makefile
config.status: creating sample/Makefile
config.status: creating onig-config
config.status: creating src/config.h
config.status: src/config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default commands
↓ 120 lines
ASSISTANT
Show reasoning

The configure passed with the new LDFLAGS. Now let me build it.

compile-bench> cd /home/peter/jq-1.8.1 && make -j$(nproc) 2>&1 | tail -50
/bin/bash ../libtool  --tag=CC   --mode=link x86_64-w64-mingw32-gcc -Wall   -O2  -version-info 10:0:5  -static -Wl,-Bstatic -lpthread -o libonig.la -rpath /usr/local/lib regparse.lo regcomp.lo regexec.lo regenc.lo regerror.lo regext.lo regsyntax.lo regtrav.lo regversion.lo st.lo reggnu.lo  unicode.lo unicode_unfold_key.lo unicode_fold1_key.lo unicode_fold2_key.lo unicode_fold3_key.lo ascii.lo utf8.lo utf16_be.lo utf16_le.lo utf32_be.lo utf32_le.lo euc_jp.lo euc_jp_prop.lo sjis.lo sjis_prop.lo iso8859_1.lo iso8859_2.lo iso8859_3.lo iso8859_4.lo iso8859_5.lo iso8859_6.lo iso8859_7.lo iso8859_8.lo iso8859_9.lo iso8859_10.lo iso8859_11.lo iso8859_13.lo iso8859_14.lo iso8859_15.lo iso8859_16.lo euc_tw.lo euc_kr.lo big5.lo gb18030.lo koi8_r.lo cp1251.lo onig_init.lo  
libtool: warning: undefined symbols not allowed in x86_64-w64-mingw32 shared libraries; building static only
libtool: link: x86_64-w64-mingw32-ar cr .libs/libonig.a  regparse.o regcomp.o regexec.o regenc.o regerror.o regext.o regsyntax.o regtrav.o regversion.o st.o reggnu.o unicode.o unicode_unfold_key.o unicode_fold1_key.o unicode_fold2_key.o unicode_fold3_key.o ascii.o utf8.o utf16_be.o utf16_le.o utf32_be.o utf32_le.o euc_jp.o euc_jp_prop.o sjis.o sjis_prop.o iso8859_1.o iso8859_2.o iso8859_3.o iso8859_4.o iso8859_5.o iso8859_6.o iso8859_7.o iso8859_8.o iso8859_9.o iso8859_10.o iso8859_11.o iso8859_13.o iso8859_14.o iso8859_15.o iso8859_16.o euc_tw.o euc_kr.o big5.o gb18030.o koi8_r.o cp1251.o onig_init.o
libtool: link: x86_64-w64-mingw32-ranlib .libs/libonig.a
libtool: link: ( cd ".libs" && rm -f "libonig.la" && ln -s "../libonig.la" "libonig.la" )
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making all in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making all in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
sed -e 's,[@]datadir[@],/usr/local/share,g' -e 's,[@]datarootdir[@],/usr/local/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/usr/local,g' -e 's,[@]exec_prefix[@],/usr/local,g' -e 's,[@]libdir[@],/usr/local/lib,g' -e 's,[@]includedir[@],/usr/local/include,g' < ./oniguruma.pc.in > oniguruma.pc
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
  CC       src/builtin.lo
  CC       src/bytecode.lo
  CC       src/compile.lo
  CC       src/execute.lo
  CC       src/jq_test.lo
  CC       src/jv.lo
  CC       src/jv_alloc.lo
  CC       src/jv_aux.lo
  CC       src/jv_dtoa.lo
  CC       src/jv_file.lo
  CC       src/jv_parse.lo
  CC       src/jv_print.lo
  CC       src/jv_unicode.lo
  CC       src/linker.lo
  CC       src/locfile.lo
  CC       src/util.lo
  CC       src/jv_dtoa_tsd.lo
  CC       vendor/decNumber/decContext.lo
  CC       vendor/decNumber/decNumber.lo
  CC       src/lexer.lo
  CC       src/parser.lo
  GEN      jq.1
  CC       src/main.o
src/main.c:21:1: warning: function declaration isn't a prototype [-Wstrict-prototypes]
   21 | extern void jv_tsd_dtoa_ctx_init();
      | ^~~~~~
  CCLD     libjq.la
  CCLD     jq.exe
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 51 lines
ASSISTANT
Show reasoning

The build completed successfully. Let me check if the executable is now fully statically linked.

compile-bench> cp /home/peter/jq-1.8.1/jq.exe /home/peter/result/jq.exe
[empty output]
compile-bench> x86_64-w64-mingw32-objdump -p /home/peter/result/jq.exe | grep "DLL Name"
	DLL Name: KERNEL32.dll
	DLL Name: msvcrt.dll
	DLL Name: SHLWAPI.dll
↓ 4 lines
ASSISTANT
Show reasoning

Great! The pthread library is now statically linked. The remaining DLLs are:
- KERNEL32.dll - Windows kernel functions (always needed)
- msvcrt.dll - Microsoft C runtime (needed on Windows)
- SHLWAPI.dll - Windows Shell API

These are standard Windows system DLLs that are present on all Windows systems, so this is effectively a static build for the purposes of distributing the executable. The important libraries (jq's own code, oniguruma, decNumber, and pthread) are all statically linked.

However, let me verify the file is in the correct location and check its properties to make sure everything is correct.

Great! The pthread library is now statically linked. Let me verify the final executable:

compile-bench> ls -lh /home/peter/result/jq.exe
-rwxr-xr-x 1 peter peter 1.9M Sep 29 18:12 /home/peter/result/jq.exe
compile-bench> file /home/peter/result/jq.exe
/home/peter/result/jq.exe: PE32+ executable (console) x86-64, for MS Windows
compile-bench> x86_64-w64-mingw32-strip /home/peter/result/jq.exe && ls -lh /home/peter/result/jq.exe
-rwxr-xr-x 1 peter peter 957K Sep 29 18:12 /home/peter/result/jq.exe
ASSISTANT
Show reasoning

The user asked me to compile jq for Windows (amd64) with static linking. Let me verify what we have:

1. The executable is now at /home/peter/result/jq.exe
2. It's a PE32+ executable (64-bit Windows)
3. It only depends on Windows system DLLs (KERNEL32.dll, msvcrt.dll, SHLWAPI.dll)
4. The libwinpthread-1.dll dependency has been removed with static linking
5. The executable has been stripped and is now 957K

The remaining DLL dependencies (KERNEL32.dll, msvcrt.dll, SHLWAPI.dll) are standard Windows system libraries that are always present on Windows systems. These cannot be statically linked as they are part of the Windows OS.

Let me verify the binary is correct and confirm it's properly built for Windows.

compile-bench> x86_64-w64-mingw32-objdump -p /home/peter/result/jq.exe | head -30
/home/peter/result/jq.exe:     file format pei-x86-64

Characteristics 0x22e
	executable
	line numbers stripped
	symbols stripped
	large address aware
	debugging information removed

Time/Date		Thu Jan  1 00:00:00 1970
Magic			020b	(PE32+)
MajorLinkerVersion	2
MinorLinkerVersion	38
SizeOfCode		000000000007fa00
SizeOfInitializedData	00000000000eee00
SizeOfUninitializedData	0000000000001000
AddressOfEntryPoint	0000000000001520
BaseOfCode		0000000000001000
ImageBase		0000000140000000
SectionAlignment	00001000
FileAlignment		00000200
MajorOSystemVersion	4
MinorOSystemVersion	0
MajorImageVersion	0
MinorImageVersion	0
MajorSubsystemVersion	5
MinorSubsystemVersion	2
Win32Version		00000000
SizeOfImage		000f6000
↓ 30 lines
ASSISTANT
Show reasoning

The user asked me to compile jq for Windows amd64 and install it to /home/peter/result/jq.exe, built statically.

Looking at the DLL dependencies:
- KERNEL32.dll - Windows system library (always needed)
- msvcrt.dll - Windows C runtime (always needed)
- SHLWAPI.dll - Windows Shell API library (system library)

These are all Windows system libraries that are present on all Windows systems. The important thing is that we've eliminated the dependency on libwinpthread-1.dll, which is not a system library and would need to be distributed separately.

The executable is now:
1. Built for Windows amd64 (PE32+ executable x86-64)
2. Located at /home/peter/result/jq.exe
3. Statically linked (no custom DLL dependencies, only Windows system DLLs)
4. Stripped to 957K in size

This is the best we can do for a "static" Windows build - Windows system DLLs like KERNEL32.dll and msvcrt.dll are always dynamically linked on Windows. The build is considered static because all the jq-specific code and third-party libraries (like oniguruma and pthread) are statically linked.

Let me verify the build is correct by checking the final state.

compile-bench> x86_64-w64-mingw32-objdump -p /home/peter/result/jq.exe | grep -A 20 "DLL Name"
	DLL Name: KERNEL32.dll
	vma:  Hint/Ord Member-Name Bound-To
	f1b40	   20  AddVectoredExceptionHandler
	f1b5e	  141  CloseHandle
	f1b6c	  197  CreateEventA
	f1b7c	  243  CreateSemaphoreA
	f1b90	  283  DeleteCriticalSection
	f1ba8	  313  DuplicateHandle
	f1bba	  319  EnterCriticalSection
	f1bd2	  525  GetConsoleMode
	f1be4	  552  GetCurrentProcess
	f1bf8	  553  GetCurrentProcessId
	f1c0e	  556  GetCurrentThread
	f1c22	  557  GetCurrentThreadId
	f1c38	  627  GetHandleInformation
	f1c50	  630  GetLastError
	f1c60	  654  GetModuleHandleW
	f1c74	  710  GetProcAddress
	f1c86	  711  GetProcessAffinityMask
	f1ca0	  744  GetStartupInfoW
	f1cb2	  746  GetStdHandle
--
	DLL Name: msvcrt.dll
	vma:  Hint/Ord Member-Name Bound-To
	f1fcc	   56  __C_specific_handler
	f1fe4	   64  ___lc_codepage_func
	f1ffa	   67  ___mb_cur_max_func
	f2010	   84  __iob_func
	f201e	   91  __lconv_init
	f202e	   97  __set_app_type
	f2040	   99  __setusermatherr
	f2054	  110  __wgetmainargs
	f2066	  111  __winitenv
	f2074	  121  _amsg_exit
	f2082	  135  _beginthreadex
	f2094	  139  _cexit
	f209e	  151  _commode
	f20aa	  187  _endthreadex
	f20ba	  188  _environ
	f20c6	  190  _errno
	f20d0	  220  _fmode
	f20da	  234  _fstat64
	f20e6	  240  _fullpath
--
	DLL Name: SHLWAPI.dll
	vma:  Hint/Ord Member-Name Bound-To
	f248a	  105  PathIsRelativeA

 000f103c	00000000 00000000 00000000 00000000 00000000

The Function Table (interpreted .pdata section contents)
vma:			BeginAddress	 EndAddress	  UnwindData
 00000001400e6000:	0000000140001000 0000000140001001 00000001400eb000
 00000001400e600c:	0000000140001010 000000014000113e 00000001400eb004
 00000001400e6018:	0000000140001140 0000000140001189 00000001400eb00c
 00000001400e6024:	0000000140001190 00000001400014f6 00000001400eb014
 00000001400e6030:	0000000140001500 000000014000151d 00000001400eb028
 00000001400e603c:	0000000140001520 000000014000153d 00000001400eb048
 00000001400e6048:	0000000140001540 0000000140001559 00000001400eb068
 00000001400e6054:	0000000140001560 000000014000156c 00000001400eb070
 00000001400e6060:	0000000140001570 0000000140001571 00000001400eb074
 00000001400e606c:	0000000140001580 00000001400015c4 00000001400eb078
 00000001400e6078:	00000001400015d0 00000001400015f2 00000001400eb084
 00000001400e6084:	0000000140001600 00000001400016d8 00000001400eb08c
 00000001400e6090:	00000001400016e0 0000000140001723 00000001400eb0a4
↓ 66 lines
ASSISTANT
Show reasoning

Good! The executable has been successfully compiled for Windows amd64. It's now statically linked with the pthread library (libwinpthread-1.dll is no longer listed as a dependency). The only remaining DLL dependencies are:
- KERNEL32.dll (Windows kernel functions)
- msvcrt.dll (Microsoft C Runtime)
- SHLWAPI.dll (Shell lightweight utility library)

These are standard Windows system DLLs that are present on all Windows systems, so this is as "static" as we can get for a Windows executable. The executable has also been stripped to reduce its size from 1.9MB to 957KB.

Let me verify that the file is correctly placed in the result directory and confirm the build was successful.

Perfect! Let me verify the final result:

compile-bench> ls -lh /home/peter/result/ && echo "---" && file /home/peter/result/jq.exe && echo "---" && md5sum /home/peter/result/jq.exe
total 960K
-rwxr-xr-x 1 peter peter 957K Sep 29 18:12 jq.exe
---
/home/peter/result/jq.exe: PE32+ executable (console) x86-64 (stripped to external PDB), for MS Windows
---
b4c571f7dda886b44fcd4cbed46a5824  /home/peter/result/jq.exe
↓ 7 lines
ASSISTANT
Show reasoning

The user asked me to compile jq v1.8.1 for Windows amd64 with static linking and install it to /home/peter/result/jq.exe. Let me verify what I've accomplished:

1. ✅ Extracted jq.tar.gz (jq version 1.8.1)
2. ✅ Installed mingw-w64 cross-compiler for Windows
3. ✅ Configured with --host=x86_64-w64-mingw32 for Windows amd64 build
4. ✅ Used --enable-static --disable-shared flags
5. ✅ Used LDFLAGS="-static -Wl,-Bstatic -lpthread" for static linking
6. ✅ Built the executable
7. ✅ Copied to /home/peter/result/jq.exe
8. ✅ Stripped the executable to reduce size (from 1.9M to 957K)

The executable now only depends on:
- KERNEL32.dll (Windows system DLL)
- msvcrt.dll (Windows C runtime)
- SHLWAPI.dll (Windows Shell API)

These are standard Windows system DLLs that are present on all Windows systems. The pthread library is now statically linked (it was previously dynamically linked to libwinpthread-1.dll).

The build is as static as we can make it for Windows. The remaining DLLs are core Windows system libraries that cannot be statically linked.

Let me verify the task is complete by checking:
1. The file exists at the correct location
2. It's a Windows PE executable for x86-64
3. It's properly built and stripped

Everything looks good!

Excellent! I have successfully compiled jq v1.8.1 for Windows (amd64) with static linking. Here's a summary of what was accomplished:

Summary:

✅ Extracted jq-1.8.1 source code from jq.tar.gz
✅ Installed MinGW-w64 cross-compiler toolchain for Windows
✅ Configured with static linking options:
- --host=x86_64-w64-mingw32 (for Windows 64-bit)
- --enable-static --disable-shared
- LDFLAGS="-static -Wl,-Bstatic -lpthread"
✅ Built the jq executable
✅ Stripped debug symbols to reduce file size
✅ Installed to /home/peter/result/jq.exe

Final Result:

- Location: /home/peter/result/jq.exe
- Size: 957 KB (stripped)
- Architecture: PE32+ executable (console) x86-64, for MS Windows
- Static linking: pthread library is statically linked
- Dependencies: Only standard Windows system DLLs:
- KERNEL32.dll (Windows kernel)
- msvcrt.dll (C runtime)
- SHLWAPI.dll (Shell API)

These are core Windows system libraries present on all Windows systems and cannot be statically linked. The executable is as statically linked as possible for a Windows build!

Task finished successfully, all checks passed!
Checks passed:
jq.exe is an amd64 Windows executable
jq help contains expected string
jq works