| Cost | $0.010 |
| Total elapsed time | 48s |
| LLM inference time | 18s |
| Command execution time | 30s |
| Commands executed | 8 |
All details >
| Attempt ID | e6g5iw6pk03kh | Attempt group | run-16-09-22-05 |
| Revision | fb5c74bd2fee | AWS Instance | m8i.2xlarge |
| Start time | 2025-09-16T22:08:49.740Z | End time | 2025-09-16T22:09:37.722Z |
| Task | jq | Environment | ubuntu-22.04-amd64-offline |
| Model |  gemini-2.5-flash-thinking | OpenRouter slug | google/gemini-2.5-flash |
| Temperature | 1 | Explicit prompt caching | false |
| User msg after tool call | false | Max tool calls | 50 |
| Total timeout seconds | 900 | Single command timeout | 600 |
| Cost | $0.010 | Duration | 48s |
| LLM inference time | 18s | Command execution time | 30s |
| Final context tokens | 7,264 | Total output tokens | 1,568 |
| Output reasoning tokens | 1,362 | Messages | 19 |
| Assistant messages | 9 | User messages | 1 |
| System messages | 1 | Commands executed | 8 |
jq 1.8.1 is a command-line JSON utility for viewing and transforming JSON.
Project link: github.com/jqlang/jq
Task:
Compile and install jq to a specific location.
Difficulties:
Standard autotools setup, nothing special.
Environment:
Ubuntu 22.04 on amd64, without internet access.
You are a package-building specialist operating a Ubuntu 22.04 bash shell via one tool: run_terminal_cmd.
The current working directory of every run_terminal_cmd is /home/peter.
Execution rules:
- Always pass non-interactive flags for any command that could prompt (e.g., -y, --yes, DEBIAN_FRONTEND=noninteractive).
- Don't include any newlines in the command.
- The environment is offline, assume you have all the necessary tools already installed.
If you encounter any errors or issues while doing the user's request, you must fix them and continue the task.
At the end verify you did the user request correctly.
You are given jq v1.8.1 source code at jq.tar.gz. Please compile the jq package and install it to /home/peter/result. Create a symlink from /home/peter/result/jq to the actual binary.
Show reasoning
Analyzing Installation Steps
I'm mapping out the precise steps for a jq installation. My plan is to untar the source, configure the build environment, and then install to a custom directory. Currently, the focus is on the proper commands for extracting the source archive and navigating to the build directory.
Formulating the Execution Plan
I've refined my approach and finalized the plan. After extracting the source, the ./configure command with the --prefix option is critical. Compilation via make, and the subsequent installation step using make install are next. Lastly, I will set up a symbolic link to ensure easy execution of jq. Verification is the final step.
[empty output]
Show reasoning
Analyzing the Next Steps
I've extracted the jq.tar.gz file and determined my next action is to enter the directory jq-1.8.1. From there, the focus shifts to compiling jq. I expect the standard configure, make, and install steps will follow.
Navigating and Configuring
I've entered the jq-1.8.1 directory after extracting the archive. Now, I'm preparing for the configuration stage. I intend to use ./configure with the installation prefix set to /home/peter/result. I will then inspect the INSTALL and README files for any special instructions or dependencies.
jq-1.8.1/ jq.tar.gz
Show reasoning
Installing jq: Next Steps
I've just finished extracting the jq.tar.gz file, and now have the jq-1.6 directory to work with. My next step is to move into that directory and begin the configuration process. After that, I'll compile and install jq, specifically targeting the /home/peter/result directory. I'm eager to see how the installation goes.
Outlining the Steps
I've moved into the jq-1.8.1 directory and am now outlining the precise commands. First, the configuration using ./configure --prefix=/home/peter/result. After that, I'll execute make to compile, and finally, make install to put everything where it needs to go. The final piece will be establishing that crucial symlink.
compile-bench> cd jq-1.8.1 && ./configure --prefix=/home/peter/result checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for wchar.h... yes
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking whether make supports nested variables... yes
checking dependency style of gcc... gcc3
checking whether make supports nested variables... (cached) yes
checking for ar... ar
checking the archiver (ar) interface... ar
checking whether to enable maintainer-specific portions of Makefiles... no
checking for gcc... (cached) gcc
checking whether the compiler supports GNU C... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to enable C11 features... (cached) none needed
checking whether gcc understands -c and -o together... (cached) yes
checking how to run the C preprocessor... gcc -E
checking for bison... no
checking for byacc... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking
[command output truncated]
/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking whether make sets $(MAKE)... (cached) yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking for sys/times.h... yes
checking size of int... 4
checking size of long... 8
checking size of long long... 8
checking size of void*... 8
checking for size_t... yes
checking for working alloca.h... yes
checking for alloca... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating test/Makefile
config.status: creating sample/Makefile
config.status: creating onig-config
config.status: creating src/config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default commands
↓ 133 lines
checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for wchar.h... yes checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... yes checking whether _XOPEN_SOURCE should be defined... no checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports the include directive... yes (GNU style) checking whether make supports nested variables... yes checking dependency style of gcc... gcc3 checking whether make supports nested variables... (cached) yes checking for ar... ar checking the archiver (ar) interface... ar checking whether to enable maintainer-specific portions of Makefiles... no checking for gcc... (cached) gcc checking whether the compiler supports GNU C... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to enable C11 features... (cached) none needed checking whether gcc understands -c and -o together... (cached) yes checking how to run the C preprocessor... gcc -E checking for bison... no checking for byacc... no checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for fgrep... /usr/bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for file... file checking for objdump... objdump checking [command output truncated] /usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for file... file checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /usr/bin/dd checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking whether make sets $(MAKE)... (cached) yes checking for sys/time.h... yes checking for unistd.h... (cached) yes checking for sys/times.h... yes checking size of int... 4 checking size of long... 8 checking size of long long... 8 checking size of void*... 8 checking for size_t... yes checking for working alloca.h... yes checking for alloca... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating test/Makefile config.status: creating sample/Makefile config.status: creating onig-config config.status: creating src/config.h config.status: executing depfiles commands config.status: executing libtool commands config.status: executing default commands
Show reasoning
Progressing the Installation
I've successfully extracted the source code and configured the build environment. Now I'm compiling the package using make. After this, I plan to install it to the designated directory with make install. Finally, I'll create the necessary symbolic link.
compile-bench> cd jq-1.8.1 && make mkdir -p src
GEN src/builtin.inc
mkdir -p src
GEN src/config_opts.inc
mkdir -p src
GEN src/version.h
make all-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making all in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making all in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make all-am
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c -o regparse.lo regparse.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c regparse.c -fPIC -DPIC -o .libs/regparse.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c regparse.c -o regparse.o >/dev/null 2>&1
mv -f .deps/regparse.Tpo .deps/regparse.Plo
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c -o regcomp.lo regcomp.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c regcomp.c -fPIC -DPIC -o .libs/regcomp.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c regcomp.c -o regcomp.o >/dev/null 2>&1
mv -f .deps/regcomp.Tpo .deps/regcomp.Plo
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c -o regexec.lo regexec.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c regexec.c -fPIC -DPIC -o .libs/regexec.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c regexec.c -o regexec.o >/dev/null 2>&1
mv -f .deps/regexec.Tpo .deps/regexec.Plo
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c -o regenc.lo regenc.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c regenc.c -fPIC -DPIC -o .libs/regenc.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c regenc.c -o regenc.o >/dev/null 2>&1
mv -f .deps/regenc.Tpo .deps/regenc.Plo
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c -o regerror.lo regerror.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c regerror.c -fPIC -DPIC -o .libs/regerror.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c regerror.c -o regerror.o >/dev/null 2
[command output truncated]
koi8_r.o .libs/cp1251.o .libs/onig_init.o -g -O2 -Wl,-soname -Wl,libonig.so.5 -o .libs/libonig.so.5.5.0
libtool: link: (cd ".libs" && rm -f "libonig.so.5" && ln -s "libonig.so.5.5.0" "libonig.so.5")
libtool: link: (cd ".libs" && rm -f "libonig.so" && ln -s "libonig.so.5.5.0" "libonig.so")
libtool: link: ar cr .libs/libonig.a regparse.o regcomp.o regexec.o regenc.o regerror.o regext.o regsyntax.o regtrav.o regversion.o st.o reggnu.o unicode.o unicode_unfold_key.o unicode_fold1_key.o unicode_fold2_key.o unicode_fold3_key.o ascii.o utf8.o utf16_be.o utf16_le.o utf32_be.o utf32_le.o euc_jp.o euc_jp_prop.o sjis.o sjis_prop.o iso8859_1.o iso8859_2.o iso8859_3.o iso8859_4.o iso8859_5.o iso8859_6.o iso8859_7.o iso8859_8.o iso8859_9.o iso8859_10.o iso8859_11.o iso8859_13.o iso8859_14.o iso8859_15.o iso8859_16.o euc_tw.o euc_kr.o big5.o gb18030.o koi8_r.o cp1251.o onig_init.o
libtool: link: ranlib .libs/libonig.a
libtool: link: ( cd ".libs" && rm -f "libonig.la" && ln -s "../libonig.la" "libonig.la" )
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making all in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making all in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
sed -e 's,[@]datadir[@],/home/peter/result/share,g' -e 's,[@]datarootdir[@],/home/peter/result/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/home/peter/result,g' -e 's,[@]exec_prefix[@],/home/peter/result,g' -e 's,[@]libdir[@],/home/peter/result/lib,g' -e 's,[@]includedir[@],/home/peter/result/include,g' < ./oniguruma.pc.in > oniguruma.pc
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
mkdir -p src
GEN src/version.h
CC src/main.o
CC src/builtin.lo
CC src/bytecode.lo
CC src/compile.lo
CC src/execute.lo
CC src/jq_test.lo
CC src/jv.lo
CC src/jv_alloc.lo
CC src/jv_aux.lo
CC src/jv_dtoa.lo
CC src/jv_file.lo
CC src/jv_parse.lo
CC src/jv_print.lo
CC src/jv_unicode.lo
CC src/linker.lo
CC src/locfile.lo
CC src/util.lo
CC src/jv_dtoa_tsd.lo
CC vendor/decNumber/decContext.lo
CC vendor/decNumber/decNumber.lo
CC src/lexer.lo
CC src/parser.lo
CCLD libjq.la
CCLD jq
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 84 lines
mkdir -p src GEN src/builtin.inc mkdir -p src GEN src/config_opts.inc mkdir -p src GEN src/version.h make all-recursive make[1]: Entering directory '/home/peter/jq-1.8.1' Making all in vendor/oniguruma make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma' Making all in src make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src' make all-am make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src' /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c -o regparse.lo regparse.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c regparse.c -fPIC -DPIC -o .libs/regparse.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c regparse.c -o regparse.o >/dev/null 2>&1 mv -f .deps/regparse.Tpo .deps/regparse.Plo /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c -o regcomp.lo regcomp.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c regcomp.c -fPIC -DPIC -o .libs/regcomp.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c regcomp.c -o regcomp.o >/dev/null 2>&1 mv -f .deps/regcomp.Tpo .deps/regcomp.Plo /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c -o regexec.lo regexec.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c regexec.c -fPIC -DPIC -o .libs/regexec.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c regexec.c -o regexec.o >/dev/null 2>&1 mv -f .deps/regexec.Tpo .deps/regexec.Plo /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c -o regenc.lo regenc.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c regenc.c -fPIC -DPIC -o .libs/regenc.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c regenc.c -o regenc.o >/dev/null 2>&1 mv -f .deps/regenc.Tpo .deps/regenc.Plo /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c -o regerror.lo regerror.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c regerror.c -fPIC -DPIC -o .libs/regerror.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c regerror.c -o regerror.o >/dev/null 2 [command output truncated] koi8_r.o .libs/cp1251.o .libs/onig_init.o -g -O2 -Wl,-soname -Wl,libonig.so.5 -o .libs/libonig.so.5.5.0 libtool: link: (cd ".libs" && rm -f "libonig.so.5" && ln -s "libonig.so.5.5.0" "libonig.so.5") libtool: link: (cd ".libs" && rm -f "libonig.so" && ln -s "libonig.so.5.5.0" "libonig.so") libtool: link: ar cr .libs/libonig.a regparse.o regcomp.o regexec.o regenc.o regerror.o regext.o regsyntax.o regtrav.o regversion.o st.o reggnu.o unicode.o unicode_unfold_key.o unicode_fold1_key.o unicode_fold2_key.o unicode_fold3_key.o ascii.o utf8.o utf16_be.o utf16_le.o utf32_be.o utf32_le.o euc_jp.o euc_jp_prop.o sjis.o sjis_prop.o iso8859_1.o iso8859_2.o iso8859_3.o iso8859_4.o iso8859_5.o iso8859_6.o iso8859_7.o iso8859_8.o iso8859_9.o iso8859_10.o iso8859_11.o iso8859_13.o iso8859_14.o iso8859_15.o iso8859_16.o euc_tw.o euc_kr.o big5.o gb18030.o koi8_r.o cp1251.o onig_init.o libtool: link: ranlib .libs/libonig.a libtool: link: ( cd ".libs" && rm -f "libonig.la" && ln -s "../libonig.la" "libonig.la" ) make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src' make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src' Making all in test make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test' Making all in sample make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample' make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma' sed -e 's,[@]datadir[@],/home/peter/result/share,g' -e 's,[@]datarootdir[@],/home/peter/result/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/home/peter/result,g' -e 's,[@]exec_prefix[@],/home/peter/result,g' -e 's,[@]libdir[@],/home/peter/result/lib,g' -e 's,[@]includedir[@],/home/peter/result/include,g' < ./oniguruma.pc.in > oniguruma.pc make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma' make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma' make[2]: Entering directory '/home/peter/jq-1.8.1' mkdir -p src GEN src/version.h CC src/main.o CC src/builtin.lo CC src/bytecode.lo CC src/compile.lo CC src/execute.lo CC src/jq_test.lo CC src/jv.lo CC src/jv_alloc.lo CC src/jv_aux.lo CC src/jv_dtoa.lo CC src/jv_file.lo CC src/jv_parse.lo CC src/jv_print.lo CC src/jv_unicode.lo CC src/linker.lo CC src/locfile.lo CC src/util.lo CC src/jv_dtoa_tsd.lo CC vendor/decNumber/decContext.lo CC vendor/decNumber/decNumber.lo CC src/lexer.lo CC src/parser.lo CCLD libjq.la CCLD jq make[2]: Leaving directory '/home/peter/jq-1.8.1' make[1]: Leaving directory '/home/peter/jq-1.8.1'
Show reasoning
Deploying the Build
The make command finished without errors. My next task is to install the built jq executable to the destination directory, and then I need to create a symbolic link to it. I think this will be straightforward.
compile-bench> cd jq-1.8.1 && make install mkdir -p src
GEN src/version.h
make install-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making install in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making install in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
/usr/bin/mkdir -p '/home/peter/result/lib'
/bin/bash ../libtool --mode=install /usr/bin/install -c libonig.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libonig.so.5.5.0 /home/peter/result/lib/libonig.so.5.5.0
libtool: install: (cd /home/peter/result/lib && { ln -s -f libonig.so.5.5.0 libonig.so.5 || { rm -f libonig.so.5 && ln -s libonig.so.5.5.0 libonig.so.5; }; })
libtool: install: (cd /home/peter/result/lib && { ln -s -f libonig.so.5.5.0 libonig.so || { rm -f libonig.so && ln -s libonig.so.5.5.0 libonig.so; }; })
libtool: install: /usr/bin/install -c .libs/libonig.lai /home/peter/result/lib/libonig.la
libtool: install: /usr/bin/install -c .libs/libonig.a /home/peter/result/lib/libonig.a
libtool: install: chmod 644 /home/peter/result/lib/libonig.a
libtool: install: ranlib /home/peter/result/lib/libonig.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
/home/peter/result/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
/usr/bin/mkdir -p '/home/peter/result/include'
/usr/bin/install -c -m 644 oniguruma.h oniggnu.h '/home/peter/result/include'
make install-data-hook
make[5]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[5]: Nothing to be done for 'install-data-hook'.
make[5]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making install in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be d
[command output truncated]
h /home/peter/result/lib src/builtin.lo src/bytecode.lo src/compile.lo src/execute.lo src/jq_test.lo src/jv.lo src/jv_alloc.lo src/jv_aux.lo src/jv_dtoa.lo src/jv_file.lo src/jv_parse.lo src/jv_print.lo src/jv_unicode.lo src/linker.lo src/locfile.lo src/util.lo src/jv_dtoa_tsd.lo vendor/decNumber/decContext.lo vendor/decNumber/decNumber.lo src/lexer.lo src/parser.lo -lm vendor/oniguruma/src/.libs/libonig.la -lpthread )
libtool: install: /usr/bin/install -c .libs/libjq.so.1.0.4T /home/peter/result/lib/libjq.so.1.0.4
libtool: install: (cd /home/peter/result/lib && { ln -s -f libjq.so.1.0.4 libjq.so.1 || { rm -f libjq.so.1 && ln -s libjq.so.1.0.4 libjq.so.1; }; })
libtool: install: (cd /home/peter/result/lib && { ln -s -f libjq.so.1.0.4 libjq.so || { rm -f libjq.so && ln -s libjq.so.1.0.4 libjq.so; }; })
libtool: install: /usr/bin/install -c .libs/libjq.lai /home/peter/result/lib/libjq.la
libtool: install: /usr/bin/install -c .libs/libjq.a /home/peter/result/lib/libjq.a
libtool: install: chmod 644 /home/peter/result/lib/libjq.a
libtool: install: ranlib /home/peter/result/lib/libjq.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
/home/peter/result/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
/usr/bin/mkdir -p '/home/peter/result/bin'
/bin/bash ./libtool --mode=install /usr/bin/install -c jq '/home/peter/result/bin'
libtool: install: /usr/bin/install -c .libs/jq /home/peter/result/bin/jq
/usr/bin/mkdir -p '/home/peter/result/share/doc/jq'
/usr/bin/install -c -m 644 README.md NEWS.md COPYING AUTHORS '/home/peter/result/share/doc/jq'
/usr/bin/mkdir -p '/home/peter/result/include'
/usr/bin/install -c -m 644 src/jv.h src/jq.h '/home/peter/result/include'
/usr/bin/mkdir -p '/home/peter/result/share/man/man1'
/usr/bin/install -c -m 644 jq.1 '/home/peter/result/share/man/man1'
/usr/bin/mkdir -p '/home/peter/result/lib/pkgconfig'
/usr/bin/install -c -m 644 libjq.pc '/home/peter/result/lib/pkgconfig'
make[3]: Leaving directory '/home/peter/jq-1.8.1'
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 93 lines
mkdir -p src
GEN src/version.h
make install-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making install in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making install in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
/usr/bin/mkdir -p '/home/peter/result/lib'
/bin/bash ../libtool --mode=install /usr/bin/install -c libonig.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libonig.so.5.5.0 /home/peter/result/lib/libonig.so.5.5.0
libtool: install: (cd /home/peter/result/lib && { ln -s -f libonig.so.5.5.0 libonig.so.5 || { rm -f libonig.so.5 && ln -s libonig.so.5.5.0 libonig.so.5; }; })
libtool: install: (cd /home/peter/result/lib && { ln -s -f libonig.so.5.5.0 libonig.so || { rm -f libonig.so && ln -s libonig.so.5.5.0 libonig.so; }; })
libtool: install: /usr/bin/install -c .libs/libonig.lai /home/peter/result/lib/libonig.la
libtool: install: /usr/bin/install -c .libs/libonig.a /home/peter/result/lib/libonig.a
libtool: install: chmod 644 /home/peter/result/lib/libonig.a
libtool: install: ranlib /home/peter/result/lib/libonig.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
/home/peter/result/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
/usr/bin/mkdir -p '/home/peter/result/include'
/usr/bin/install -c -m 644 oniguruma.h oniggnu.h '/home/peter/result/include'
make install-data-hook
make[5]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[5]: Nothing to be done for 'install-data-hook'.
make[5]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making install in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be d
[command output truncated]
h /home/peter/result/lib src/builtin.lo src/bytecode.lo src/compile.lo src/execute.lo src/jq_test.lo src/jv.lo src/jv_alloc.lo src/jv_aux.lo src/jv_dtoa.lo src/jv_file.lo src/jv_parse.lo src/jv_print.lo src/jv_unicode.lo src/linker.lo src/locfile.lo src/util.lo src/jv_dtoa_tsd.lo vendor/decNumber/decContext.lo vendor/decNumber/decNumber.lo src/lexer.lo src/parser.lo -lm vendor/oniguruma/src/.libs/libonig.la -lpthread )
libtool: install: /usr/bin/install -c .libs/libjq.so.1.0.4T /home/peter/result/lib/libjq.so.1.0.4
libtool: install: (cd /home/peter/result/lib && { ln -s -f libjq.so.1.0.4 libjq.so.1 || { rm -f libjq.so.1 && ln -s libjq.so.1.0.4 libjq.so.1; }; })
libtool: install: (cd /home/peter/result/lib && { ln -s -f libjq.so.1.0.4 libjq.so || { rm -f libjq.so && ln -s libjq.so.1.0.4 libjq.so; }; })
libtool: install: /usr/bin/install -c .libs/libjq.lai /home/peter/result/lib/libjq.la
libtool: install: /usr/bin/install -c .libs/libjq.a /home/peter/result/lib/libjq.a
libtool: install: chmod 644 /home/peter/result/lib/libjq.a
libtool: install: ranlib /home/peter/result/lib/libjq.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
/home/peter/result/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
/usr/bin/mkdir -p '/home/peter/result/bin'
/bin/bash ./libtool --mode=install /usr/bin/install -c jq '/home/peter/result/bin'
libtool: install: /usr/bin/install -c .libs/jq /home/peter/result/bin/jq
/usr/bin/mkdir -p '/home/peter/result/share/doc/jq'
/usr/bin/install -c -m 644 README.md NEWS.md COPYING AUTHORS '/home/peter/result/share/doc/jq'
/usr/bin/mkdir -p '/home/peter/result/include'
/usr/bin/install -c -m 644 src/jv.h src/jq.h '/home/peter/result/include'
/usr/bin/mkdir -p '/home/peter/result/share/man/man1'
/usr/bin/install -c -m 644 jq.1 '/home/peter/result/share/man/man1'
/usr/bin/mkdir -p '/home/peter/result/lib/pkgconfig'
/usr/bin/install -c -m 644 libjq.pc '/home/peter/result/lib/pkgconfig'
make[3]: Leaving directory '/home/peter/jq-1.8.1'
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
Show reasoning
Considering the Next Step
I've got jq built and chilling in /home/peter/result. My next move is to establish a symbolic link. I'm thinking /home/peter/result/jq should point right to the binary at /home/peter/result/bin/jq. This should wrap up this segment.
[empty output]
Show reasoning
Evaluating Installation Strategy
I've successfully compiled jq and it's ready for installation. I'm currently evaluating the best way to install it to /home/peter/result. I'm focusing on using make install with the specified prefix, ensuring proper symlink creation afterward.
Confirming Installation Integrity
I've moved beyond the installation phase. My focus is now on rigorous verification. I'm checking for the binary's presence at the specified location, ensuring the symlink is correctly established, and finally, validating the installation by running the jq binary to confirm its functionality and version information. This should confirm the installation.
/home/peter/result/jq: symbolic link to /home/peter/result/bin/jq
jq-1.8.1
Show reasoning
Initiating Compilation Strategy
I've started by dissecting the objective: compile jq from source and establish a symbolic link. My immediate focus is the extraction phase; I'll use tar -xzf jq.tar.gz to get the source code ready. Next, I'll check the build instructions, because that's the crucial part.
Refining Installation Steps
\n\n
Now that I've successfully extracted, configured, and compiled jq, I'm on the final leg: installing and linking. I've used make install and made sure that it places the binary in the location specified during configuration with the --prefix flag. Finally, a symbolic link to the binary is in place for easier access, which I will check by using the file command, as was done before.
Analyzing Completed Execution
\n\n
I've just analyzed the successful compilation and installation of jq. The process included extracting, configuring, compiling, installing, and creating a symbolic link. I successfully used the commands, including tar, configure, make, make install, and ln -s. Verification with the file command and running the executable through the symbolic link confirms proper installation and functionality.
The jq package has been successfully compiled and installed to /home/peter/result. A symlink from /home/peter/result/jq to the actual binary /home/peter/result/bin/jq has been created.
You can run jq using /home/peter/result/jq.