Summary
Performance
| Cost | $0.007 |
| Total elapsed time | 35s |
| LLM inference time | 6s |
| Command execution time | 29s |
| Commands executed | 8 |
All details >
| Attempt ID | cp0eay12p46t7 | Attempt group | run-16-09-22-05 |
| Revision | fb5c74bd2fee | AWS Instance | m8i.2xlarge |
| Start time | 2025-09-16T22:08:07.273Z | End time | 2025-09-16T22:08:42.692Z |
| Task | jq | Environment | ubuntu-22.04-amd64-offline |
| Model |  gemini-2.5-flash | OpenRouter slug | google/gemini-2.5-flash |
| Temperature | 1 | Explicit prompt caching | false |
| User msg after tool call | false | Max tool calls | 50 |
| Total timeout seconds | 900 | Single command timeout | 600 |
| Cost | $0.007 | Duration | 35s |
| LLM inference time | 6s | Command execution time | 29s |
| Final context tokens | 7,327 | Total output tokens | 249 |
| Output reasoning tokens | 0 | Messages | 19 |
| Assistant messages | 9 | User messages | 1 |
| System messages | 1 | Commands executed | 8 |
Task
Task: jq
jq 1.8.1 is a command-line JSON utility for viewing and transforming JSON.
Project link: github.com/jqlang/jq
Task:
Compile and install jq to a specific location.
Difficulties:
Standard autotools setup, nothing special.
Environment:
Ubuntu 22.04 on amd64, without internet access.
Execution log
SYSTEM
You are a package-building specialist operating a Ubuntu 22.04 bash shell via one tool: run_terminal_cmd.
The current working directory of every run_terminal_cmd is /home/peter.
Execution rules:
- Always pass non-interactive flags for any command that could prompt (e.g., -y, --yes, DEBIAN_FRONTEND=noninteractive).
- Don't include any newlines in the command.
- The environment is offline, assume you have all the necessary tools already installed.
If you encounter any errors or issues while doing the user's request, you must fix them and continue the task.
At the end verify you did the user request correctly.
USER
You are given jq v1.8.1 source code at jq.tar.gz. Please compile the jq package and install it to /home/peter/result. Create a symlink from /home/peter/result/jq to the actual binary.
ASSISTANT
compile-bench> tar -xzf jq.tar.gz
[empty output]
ASSISTANT
compile-bench> cd jq && ./configure --prefix /home/peter/result
bash: cd: jq: No such file or directory
ASSISTANT
The previous command failed because the jq directory wasn't created in the current directory. Let me check the contents of the current directory to locate the jq source code.
compile-bench> ls -F
jq-1.8.1/ jq.tar.gz
ASSISTANT
Ah, the directory is jq-1.8.1. Let me try to configure and compile again.
compile-bench> cd jq-1.8.1 && ./configure --prefix /home/peter/result checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for wchar.h... yes
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking whether make supports nested variables... yes
checking dependency style of gcc... gcc3
checking whether make supports nested variables... (cached) yes
checking for ar... ar
checking the archiver (ar) interface... ar
checking whether to enable maintainer-specific portions of Makefiles... no
checking for gcc... (cached) gcc
checking whether the compiler supports GNU C... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to enable C11 features... (cached) none needed
checking whether gcc understands -c and -o together... (cached) yes
checking how to run the C preprocessor... gcc -E
checking for bison... no
checking for byacc... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking
[command output truncated]
/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking whether make sets $(MAKE)... (cached) yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking for sys/times.h... yes
checking size of int... 4
checking size of long... 8
checking size of long long... 8
checking size of void*... 8
checking for size_t... yes
checking for working alloca.h... yes
checking for alloca... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating test/Makefile
config.status: creating sample/Makefile
config.status: creating onig-config
config.status: creating src/config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default commands
↓ 133 lines
compile-bench> cd jq-1.8.1 && ./configure --prefix /home/peter/result
checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for wchar.h... yes checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... yes checking whether _XOPEN_SOURCE should be defined... no checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports the include directive... yes (GNU style) checking whether make supports nested variables... yes checking dependency style of gcc... gcc3 checking whether make supports nested variables... (cached) yes checking for ar... ar checking the archiver (ar) interface... ar checking whether to enable maintainer-specific portions of Makefiles... no checking for gcc... (cached) gcc checking whether the compiler supports GNU C... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to enable C11 features... (cached) none needed checking whether gcc understands -c and -o together... (cached) yes checking how to run the C preprocessor... gcc -E checking for bison... no checking for byacc... no checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for fgrep... /usr/bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for file... file checking for objdump... objdump checking [command output truncated] /usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for file... file checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /usr/bin/dd checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking whether make sets $(MAKE)... (cached) yes checking for sys/time.h... yes checking for unistd.h... (cached) yes checking for sys/times.h... yes checking size of int... 4 checking size of long... 8 checking size of long long... 8 checking size of void*... 8 checking for size_t... yes checking for working alloca.h... yes checking for alloca... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating test/Makefile config.status: creating sample/Makefile config.status: creating onig-config config.status: creating src/config.h config.status: executing depfiles commands config.status: executing libtool commands config.status: executing default commands
ASSISTANT
compile-bench> cd jq-1.8.1 && make mkdir -p src
GEN src/builtin.inc
mkdir -p src
GEN src/config_opts.inc
mkdir -p src
GEN src/version.h
make all-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making all in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making all in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make all-am
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c -o regparse.lo regparse.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c regparse.c -fPIC -DPIC -o .libs/regparse.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c regparse.c -o regparse.o >/dev/null 2>&1
mv -f .deps/regparse.Tpo .deps/regparse.Plo
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c -o regcomp.lo regcomp.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c regcomp.c -fPIC -DPIC -o .libs/regcomp.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c regcomp.c -o regcomp.o >/dev/null 2>&1
mv -f .deps/regcomp.Tpo .deps/regcomp.Plo
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c -o regexec.lo regexec.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c regexec.c -fPIC -DPIC -o .libs/regexec.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c regexec.c -o regexec.o >/dev/null 2>&1
mv -f .deps/regexec.Tpo .deps/regexec.Plo
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c -o regenc.lo regenc.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c regenc.c -fPIC -DPIC -o .libs/regenc.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c regenc.c -o regenc.o >/dev/null 2>&1
mv -f .deps/regenc.Tpo .deps/regenc.Plo
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c -o regerror.lo regerror.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c regerror.c -fPIC -DPIC -o .libs/regerror.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c regerror.c -o regerror.o >/dev/null 2
[command output truncated]
koi8_r.o .libs/cp1251.o .libs/onig_init.o -g -O2 -Wl,-soname -Wl,libonig.so.5 -o .libs/libonig.so.5.5.0
libtool: link: (cd ".libs" && rm -f "libonig.so.5" && ln -s "libonig.so.5.5.0" "libonig.so.5")
libtool: link: (cd ".libs" && rm -f "libonig.so" && ln -s "libonig.so.5.5.0" "libonig.so")
libtool: link: ar cr .libs/libonig.a regparse.o regcomp.o regexec.o regenc.o regerror.o regext.o regsyntax.o regtrav.o regversion.o st.o reggnu.o unicode.o unicode_unfold_key.o unicode_fold1_key.o unicode_fold2_key.o unicode_fold3_key.o ascii.o utf8.o utf16_be.o utf16_le.o utf32_be.o utf32_le.o euc_jp.o euc_jp_prop.o sjis.o sjis_prop.o iso8859_1.o iso8859_2.o iso8859_3.o iso8859_4.o iso8859_5.o iso8859_6.o iso8859_7.o iso8859_8.o iso8859_9.o iso8859_10.o iso8859_11.o iso8859_13.o iso8859_14.o iso8859_15.o iso8859_16.o euc_tw.o euc_kr.o big5.o gb18030.o koi8_r.o cp1251.o onig_init.o
libtool: link: ranlib .libs/libonig.a
libtool: link: ( cd ".libs" && rm -f "libonig.la" && ln -s "../libonig.la" "libonig.la" )
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making all in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making all in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
sed -e 's,[@]datadir[@],/home/peter/result/share,g' -e 's,[@]datarootdir[@],/home/peter/result/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/home/peter/result,g' -e 's,[@]exec_prefix[@],/home/peter/result,g' -e 's,[@]libdir[@],/home/peter/result/lib,g' -e 's,[@]includedir[@],/home/peter/result/include,g' < ./oniguruma.pc.in > oniguruma.pc
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
mkdir -p src
GEN src/version.h
CC src/main.o
CC src/builtin.lo
CC src/bytecode.lo
CC src/compile.lo
CC src/execute.lo
CC src/jq_test.lo
CC src/jv.lo
CC src/jv_alloc.lo
CC src/jv_aux.lo
CC src/jv_dtoa.lo
CC src/jv_file.lo
CC src/jv_parse.lo
CC src/jv_print.lo
CC src/jv_unicode.lo
CC src/linker.lo
CC src/locfile.lo
CC src/util.lo
CC src/jv_dtoa_tsd.lo
CC vendor/decNumber/decContext.lo
CC vendor/decNumber/decNumber.lo
CC src/lexer.lo
CC src/parser.lo
CCLD libjq.la
CCLD jq
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 84 lines
compile-bench> cd jq-1.8.1 && make
mkdir -p src GEN src/builtin.inc mkdir -p src GEN src/config_opts.inc mkdir -p src GEN src/version.h make all-recursive make[1]: Entering directory '/home/peter/jq-1.8.1' Making all in vendor/oniguruma make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma' Making all in src make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src' make all-am make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src' /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c -o regparse.lo regparse.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c regparse.c -fPIC -DPIC -o .libs/regparse.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c regparse.c -o regparse.o >/dev/null 2>&1 mv -f .deps/regparse.Tpo .deps/regparse.Plo /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c -o regcomp.lo regcomp.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c regcomp.c -fPIC -DPIC -o .libs/regcomp.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c regcomp.c -o regcomp.o >/dev/null 2>&1 mv -f .deps/regcomp.Tpo .deps/regcomp.Plo /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c -o regexec.lo regexec.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c regexec.c -fPIC -DPIC -o .libs/regexec.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c regexec.c -o regexec.o >/dev/null 2>&1 mv -f .deps/regexec.Tpo .deps/regexec.Plo /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c -o regenc.lo regenc.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c regenc.c -fPIC -DPIC -o .libs/regenc.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c regenc.c -o regenc.o >/dev/null 2>&1 mv -f .deps/regenc.Tpo .deps/regenc.Plo /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c -o regerror.lo regerror.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c regerror.c -fPIC -DPIC -o .libs/regerror.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c regerror.c -o regerror.o >/dev/null 2 [command output truncated] koi8_r.o .libs/cp1251.o .libs/onig_init.o -g -O2 -Wl,-soname -Wl,libonig.so.5 -o .libs/libonig.so.5.5.0 libtool: link: (cd ".libs" && rm -f "libonig.so.5" && ln -s "libonig.so.5.5.0" "libonig.so.5") libtool: link: (cd ".libs" && rm -f "libonig.so" && ln -s "libonig.so.5.5.0" "libonig.so") libtool: link: ar cr .libs/libonig.a regparse.o regcomp.o regexec.o regenc.o regerror.o regext.o regsyntax.o regtrav.o regversion.o st.o reggnu.o unicode.o unicode_unfold_key.o unicode_fold1_key.o unicode_fold2_key.o unicode_fold3_key.o ascii.o utf8.o utf16_be.o utf16_le.o utf32_be.o utf32_le.o euc_jp.o euc_jp_prop.o sjis.o sjis_prop.o iso8859_1.o iso8859_2.o iso8859_3.o iso8859_4.o iso8859_5.o iso8859_6.o iso8859_7.o iso8859_8.o iso8859_9.o iso8859_10.o iso8859_11.o iso8859_13.o iso8859_14.o iso8859_15.o iso8859_16.o euc_tw.o euc_kr.o big5.o gb18030.o koi8_r.o cp1251.o onig_init.o libtool: link: ranlib .libs/libonig.a libtool: link: ( cd ".libs" && rm -f "libonig.la" && ln -s "../libonig.la" "libonig.la" ) make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src' make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src' Making all in test make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test' Making all in sample make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample' make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma' sed -e 's,[@]datadir[@],/home/peter/result/share,g' -e 's,[@]datarootdir[@],/home/peter/result/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/home/peter/result,g' -e 's,[@]exec_prefix[@],/home/peter/result,g' -e 's,[@]libdir[@],/home/peter/result/lib,g' -e 's,[@]includedir[@],/home/peter/result/include,g' < ./oniguruma.pc.in > oniguruma.pc make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma' make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma' make[2]: Entering directory '/home/peter/jq-1.8.1' mkdir -p src GEN src/version.h CC src/main.o CC src/builtin.lo CC src/bytecode.lo CC src/compile.lo CC src/execute.lo CC src/jq_test.lo CC src/jv.lo CC src/jv_alloc.lo CC src/jv_aux.lo CC src/jv_dtoa.lo CC src/jv_file.lo CC src/jv_parse.lo CC src/jv_print.lo CC src/jv_unicode.lo CC src/linker.lo CC src/locfile.lo CC src/util.lo CC src/jv_dtoa_tsd.lo CC vendor/decNumber/decContext.lo CC vendor/decNumber/decNumber.lo CC src/lexer.lo CC src/parser.lo CCLD libjq.la CCLD jq make[2]: Leaving directory '/home/peter/jq-1.8.1' make[1]: Leaving directory '/home/peter/jq-1.8.1'
ASSISTANT
compile-bench> cd jq-1.8.1 && make install mkdir -p src
GEN src/version.h
make install-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making install in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making install in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
/usr/bin/mkdir -p '/home/peter/result/lib'
/bin/bash ../libtool --mode=install /usr/bin/install -c libonig.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libonig.so.5.5.0 /home/peter/result/lib/libonig.so.5.5.0
libtool: install: (cd /home/peter/result/lib && { ln -s -f libonig.so.5.5.0 libonig.so.5 || { rm -f libonig.so.5 && ln -s libonig.so.5.5.0 libonig.so.5; }; })
libtool: install: (cd /home/peter/result/lib && { ln -s -f libonig.so.5.5.0 libonig.so || { rm -f libonig.so && ln -s libonig.so.5.5.0 libonig.so; }; })
libtool: install: /usr/bin/install -c .libs/libonig.lai /home/peter/result/lib/libonig.la
libtool: install: /usr/bin/install -c .libs/libonig.a /home/peter/result/lib/libonig.a
libtool: install: chmod 644 /home/peter/result/lib/libonig.a
libtool: install: ranlib /home/peter/result/lib/libonig.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
/home/peter/result/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
/usr/bin/mkdir -p '/home/peter/result/include'
/usr/bin/install -c -m 644 oniguruma.h oniggnu.h '/home/peter/result/include'
make install-data-hook
make[5]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[5]: Nothing to be done for 'install-data-hook'.
make[5]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making install in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be d
[command output truncated]
h /home/peter/result/lib src/builtin.lo src/bytecode.lo src/compile.lo src/execute.lo src/jq_test.lo src/jv.lo src/jv_alloc.lo src/jv_aux.lo src/jv_dtoa.lo src/jv_file.lo src/jv_parse.lo src/jv_print.lo src/jv_unicode.lo src/linker.lo src/locfile.lo src/util.lo src/jv_dtoa_tsd.lo vendor/decNumber/decContext.lo vendor/decNumber/decNumber.lo src/lexer.lo src/parser.lo -lm vendor/oniguruma/src/.libs/libonig.la -lpthread )
libtool: install: /usr/bin/install -c .libs/libjq.so.1.0.4T /home/peter/result/lib/libjq.so.1.0.4
libtool: install: (cd /home/peter/result/lib && { ln -s -f libjq.so.1.0.4 libjq.so.1 || { rm -f libjq.so.1 && ln -s libjq.so.1.0.4 libjq.so.1; }; })
libtool: install: (cd /home/peter/result/lib && { ln -s -f libjq.so.1.0.4 libjq.so || { rm -f libjq.so && ln -s libjq.so.1.0.4 libjq.so; }; })
libtool: install: /usr/bin/install -c .libs/libjq.lai /home/peter/result/lib/libjq.la
libtool: install: /usr/bin/install -c .libs/libjq.a /home/peter/result/lib/libjq.a
libtool: install: chmod 644 /home/peter/result/lib/libjq.a
libtool: install: ranlib /home/peter/result/lib/libjq.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
/home/peter/result/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
/usr/bin/mkdir -p '/home/peter/result/bin'
/bin/bash ./libtool --mode=install /usr/bin/install -c jq '/home/peter/result/bin'
libtool: install: /usr/bin/install -c .libs/jq /home/peter/result/bin/jq
/usr/bin/mkdir -p '/home/peter/result/share/doc/jq'
/usr/bin/install -c -m 644 README.md NEWS.md COPYING AUTHORS '/home/peter/result/share/doc/jq'
/usr/bin/mkdir -p '/home/peter/result/include'
/usr/bin/install -c -m 644 src/jv.h src/jq.h '/home/peter/result/include'
/usr/bin/mkdir -p '/home/peter/result/share/man/man1'
/usr/bin/install -c -m 644 jq.1 '/home/peter/result/share/man/man1'
/usr/bin/mkdir -p '/home/peter/result/lib/pkgconfig'
/usr/bin/install -c -m 644 libjq.pc '/home/peter/result/lib/pkgconfig'
make[3]: Leaving directory '/home/peter/jq-1.8.1'
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 93 lines
compile-bench> cd jq-1.8.1 && make install
mkdir -p src
GEN src/version.h
make install-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making install in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making install in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
/usr/bin/mkdir -p '/home/peter/result/lib'
/bin/bash ../libtool --mode=install /usr/bin/install -c libonig.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libonig.so.5.5.0 /home/peter/result/lib/libonig.so.5.5.0
libtool: install: (cd /home/peter/result/lib && { ln -s -f libonig.so.5.5.0 libonig.so.5 || { rm -f libonig.so.5 && ln -s libonig.so.5.5.0 libonig.so.5; }; })
libtool: install: (cd /home/peter/result/lib && { ln -s -f libonig.so.5.5.0 libonig.so || { rm -f libonig.so && ln -s libonig.so.5.5.0 libonig.so; }; })
libtool: install: /usr/bin/install -c .libs/libonig.lai /home/peter/result/lib/libonig.la
libtool: install: /usr/bin/install -c .libs/libonig.a /home/peter/result/lib/libonig.a
libtool: install: chmod 644 /home/peter/result/lib/libonig.a
libtool: install: ranlib /home/peter/result/lib/libonig.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
/home/peter/result/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
/usr/bin/mkdir -p '/home/peter/result/include'
/usr/bin/install -c -m 644 oniguruma.h oniggnu.h '/home/peter/result/include'
make install-data-hook
make[5]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[5]: Nothing to be done for 'install-data-hook'.
make[5]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making install in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be d
[command output truncated]
h /home/peter/result/lib src/builtin.lo src/bytecode.lo src/compile.lo src/execute.lo src/jq_test.lo src/jv.lo src/jv_alloc.lo src/jv_aux.lo src/jv_dtoa.lo src/jv_file.lo src/jv_parse.lo src/jv_print.lo src/jv_unicode.lo src/linker.lo src/locfile.lo src/util.lo src/jv_dtoa_tsd.lo vendor/decNumber/decContext.lo vendor/decNumber/decNumber.lo src/lexer.lo src/parser.lo -lm vendor/oniguruma/src/.libs/libonig.la -lpthread )
libtool: install: /usr/bin/install -c .libs/libjq.so.1.0.4T /home/peter/result/lib/libjq.so.1.0.4
libtool: install: (cd /home/peter/result/lib && { ln -s -f libjq.so.1.0.4 libjq.so.1 || { rm -f libjq.so.1 && ln -s libjq.so.1.0.4 libjq.so.1; }; })
libtool: install: (cd /home/peter/result/lib && { ln -s -f libjq.so.1.0.4 libjq.so || { rm -f libjq.so && ln -s libjq.so.1.0.4 libjq.so; }; })
libtool: install: /usr/bin/install -c .libs/libjq.lai /home/peter/result/lib/libjq.la
libtool: install: /usr/bin/install -c .libs/libjq.a /home/peter/result/lib/libjq.a
libtool: install: chmod 644 /home/peter/result/lib/libjq.a
libtool: install: ranlib /home/peter/result/lib/libjq.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
/home/peter/result/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
/usr/bin/mkdir -p '/home/peter/result/bin'
/bin/bash ./libtool --mode=install /usr/bin/install -c jq '/home/peter/result/bin'
libtool: install: /usr/bin/install -c .libs/jq /home/peter/result/bin/jq
/usr/bin/mkdir -p '/home/peter/result/share/doc/jq'
/usr/bin/install -c -m 644 README.md NEWS.md COPYING AUTHORS '/home/peter/result/share/doc/jq'
/usr/bin/mkdir -p '/home/peter/result/include'
/usr/bin/install -c -m 644 src/jv.h src/jq.h '/home/peter/result/include'
/usr/bin/mkdir -p '/home/peter/result/share/man/man1'
/usr/bin/install -c -m 644 jq.1 '/home/peter/result/share/man/man1'
/usr/bin/mkdir -p '/home/peter/result/lib/pkgconfig'
/usr/bin/install -c -m 644 libjq.pc '/home/peter/result/lib/pkgconfig'
make[3]: Leaving directory '/home/peter/jq-1.8.1'
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
ASSISTANT
compile-bench> ln -sf /home/peter/result/bin/jq /home/peter/result/jq
[empty output]
ASSISTANT
compile-bench> ls -F /home/peter/result/
bin/ include/ jq@ lib/ share/
ASSISTANT
The jq package has been compiled and installed to /home/peter/result. A symlink from /home/peter/result/jq to the actual binary /home/peter/result/bin/jq has also been created.
Task finished successfully, all checks passed!
Checks passed:
jq binary exists
jq help contains expected string
jq works