| Cost | $0.018 |
| Total elapsed time | 24s |
| LLM inference time | 24s |
| Command execution time | 0.6s |
| Commands executed | 6 |
All details >
| Attempt ID | cmd5z7hrez88x | Attempt group | run-16-09-22-05 |
| Revision | fb5c74bd2fee | AWS Instance | m8i.2xlarge |
| Start time | 2025-09-16T21:53:08.374Z | End time | 2025-09-16T21:53:33.166Z |
| Task | cowsay | Environment | ubuntu-22.04-amd64-offline |
| Model |  gemini-2.5-pro | OpenRouter slug | google/gemini-2.5-pro |
| Temperature | 1 | Explicit prompt caching | false |
| User msg after tool call | false | Max tool calls | 50 |
| Total timeout seconds | 900 | Single command timeout | 600 |
| Cost | $0.018 | Duration | 24s |
| LLM inference time | 24s | Command execution time | 0.6s |
| Final context tokens | 1,003 | Total output tokens | 1,279 |
| Output reasoning tokens | 1,098 | Messages | 15 |
| Assistant messages | 7 | User messages | 1 |
| System messages | 1 | Commands executed | 6 |
Cowsay 3.8.4 is an ASCII-art speech bubble generator.
Project link: github.com/cowsay-org/cowsay.
Task:
Install the cowsay package to a specific location.
Difficulties:
Since cowsay is just a single Perl script it doesn't require any compilation, however it comes with several asset files that need to be copied as well.
Environment:
Ubuntu 22.04 on amd64, without internet access.
You are a package-building specialist operating a Ubuntu 22.04 bash shell via one tool: run_terminal_cmd.
The current working directory of every run_terminal_cmd is /home/peter.
Execution rules:
- Always pass non-interactive flags for any command that could prompt (e.g., -y, --yes, DEBIAN_FRONTEND=noninteractive).
- Don't include any newlines in the command.
- The environment is offline, assume you have all the necessary tools already installed.
If you encounter any errors or issues while doing the user's request, you must fix them and continue the task.
At the end verify you did the user request correctly.
You are given a cowsay v3.8.4 source code at /home/peter/cowsay.tar.gz. Please compile the cowsay package and install it to /home/peter/result. Create a symlink from /home/peter/result/cowsay to the actual binary.
Show reasoning
Analyzing Package Installation
I've started by extracting the cowsay archive with tar. Next, I'll investigate the contents to determine the configuration steps, likely involving ./configure. I'm expecting the typical build process: configure, make, and then make install. Let's see what the archive reveals.
Mapping Out the Steps
I've solidified my plan. After extraction, the focus shifts to running the configuration with the specified prefix. Following that, compilation with make and installation into the /home/peter/result directory. I will then create a symbolic link for easy access, finishing with a verification step to confirm a working cowsay installation.
[empty output]
Show reasoning
Analyzing Package Installation
I've started by considering the user's goal: installing cowsay. My initial step is to unpack the source code archive. After that, I need a plan to build and install, which means searching for instructions like a README or INSTALL file. The compilation step is next.
Exploring Directory Contents
I've just extracted the cowsay source. Now I'm looking through the files to understand how to build and install it. A README file should provide the necessary instructions.
compile-bench> ls cowsay-3.8.4 CHANGELOG.md INSTALL Makefile README.md bin man share
CONTRIBUTORS.md LICENSE.txt README archive doc-project man-src
↓ 3 lines
CHANGELOG.md INSTALL Makefile README.md bin man share CONTRIBUTORS.md LICENSE.txt README archive doc-project man-src
Show reasoning
Considering Installation Steps
I've verified the source code and the user's desired final location. The next step involves creating the target directory: /home/peter/result. After that, I'll cd into the extracted cowsay directory to begin the build.
Executing the Build
I've created the target directory and moved into the extracted source. Now I'm ready to compile the code using make. The INSTALL file will be my guide for the custom installation location at /home/peter/result. After the build, I'll focus on the symlink creation, as requested.
[empty output]
Show reasoning
Investigating Installation Procedures
I've reviewed the Makefile and INSTALL file. The INSTALL file gives explicit instructions for installing, but I'll start with make install since the Makefile exists. I am hesitant to run make install at this stage due to the final destination, so let me investigate the Makefile further.
Performing the Installation
I've decided to use make install with the prefix variable. I'll install to /home/peter/result as per the user's request. The plan is to find the binary in /home/peter/result/bin and then create a symlink for easier access, before verifying the successful installation.
compile-bench> make -C cowsay-3.8.4 install prefix=/home/peter/result make: Entering directory '/home/peter/cowsay-3.8.4'
install -c -d /home/peter/result/etc/cowsay/cowpath.d
install -c -d /home/peter/result/bin
install -c bin/cowsay /home/peter/result/bin/cowsay
ln -s cowsay /home/peter/result/bin/cowthink
install -c -d /home/peter/result/share/man/man1
install -c -m 644 man/man1/cowsay.1 /home/peter/result/share/man/man1/cowsay.1
ln -s cowsay.1 /home/peter/result/share/man/man1/cowthink.1
install -c -d /home/peter/result/share/cowsay/cows
install -c -m 644 share/cowsay/cows/*.cow /home/peter/result/share/cowsay/cows
install -c -d /home/peter/result/share/cowsay/site-cows
make: Leaving directory '/home/peter/cowsay-3.8.4'
↓ 13 lines
make: Entering directory '/home/peter/cowsay-3.8.4' install -c -d /home/peter/result/etc/cowsay/cowpath.d install -c -d /home/peter/result/bin install -c bin/cowsay /home/peter/result/bin/cowsay ln -s cowsay /home/peter/result/bin/cowthink install -c -d /home/peter/result/share/man/man1 install -c -m 644 man/man1/cowsay.1 /home/peter/result/share/man/man1/cowsay.1 ln -s cowsay.1 /home/peter/result/share/man/man1/cowthink.1 install -c -d /home/peter/result/share/cowsay/cows install -c -m 644 share/cowsay/cows/*.cow /home/peter/result/share/cowsay/cows install -c -d /home/peter/result/share/cowsay/site-cows make: Leaving directory '/home/peter/cowsay-3.8.4'
Show reasoning
Linking the Binary
I'm now focused on creating the symbolic link. The installation of cowsay is complete, and the next step is linking the program. I'm aiming to create a link from /home/peter/result/cowsay to the executable. It's a straightforward task, just need to ensure the paths are correct.
Formulating the Symlink
The core task is coming into focus. I'm ready to construct the symbolic link. The target is clear: /home/peter/result/bin/cowsay. The link should reside at /home/peter/result/cowsay. My next step is to execute the linking command, then verify the setup.
[empty output]
Show reasoning
Confirming the Setup
I've verified that the cowsay binary is accessible through the symlink and that the installation is functioning as expected within the designated directory. The package is indeed installed, and I can run cowsay from the symlink.
Installation Validation Underway
I'm now checking if the cowsay binary is executable, confirming its permissions are correct. Next, I'm verifying the symlink targets the right place, as planned, within /home/peter/result. Finally, I will run the binary using the symlink to confirm functionality, completing the setup.
I have successfully compiled the cowsay package, installed it to /home/peter/result, and created a symlink from /home/peter/result/cowsay to the binary. Now, let's verify the installation.
compile-bench> /home/peter/result/cowsay 'Moo!' ______
< Moo! >
------
\ ^__^
\ (oo)\_______
(__)\ )\/\
||----w |
|| ||
↓ 9 lines
______
< Moo! >
------
\ ^__^
\ (oo)\_______
(__)\ )\/\
||----w |
|| ||
The cowsay command works as expected. I have successfully completed your request.