<- Ranking
Summary
Task
curl-ssl
Model
claude-sonnet-4-thinking-16k logo
claude-sonnet-4-thinking-16k
Status
Success
Performance
Cost$0.210
Total elapsed time2m32s
LLM inference time1m53s
Command execution time40s
Commands executed20
All details >
Attempt ID bwhyja41s6v7o Attempt group run-16-09-22-05
Revision fb5c74bd2fee AWS Instance m8i.2xlarge
Start time 2025-09-16T20:14:18.787Z End time 2025-09-16T20:16:53.341Z
Task curl-ssl Environment ubuntu-22.04-amd64
Model claude-sonnet-4-thinking-16k logo claude-sonnet-4-thinking-16k OpenRouter slug anthropic/claude-sonnet-4
Temperature 1 Explicit prompt caching true
User msg after tool call true Max tool calls 70
Total timeout seconds 900 Single command timeout 600
Cost $0.210 Duration 2m32s
LLM inference time 1m53s Command execution time 40s
Final context tokens 18,240 Total output tokens 4,964
Output reasoning tokens 2,458 Messages 43
Assistant messages 21 User messages 1
System messages 1 Commands executed 20
Download full attempt result JSON
Task
Task: curl-ssl

curl 8.16.0 is a command-line HTTP client.
Project link: curl.se

Task:
Compile and install curl to a specific location. Build with SSL support (TLS v1.3), brotli, zlib and zstd.

Difficulties:
Installing dependencies can be tricky.

Environment:
Ubuntu 22.04 on amd64, with internet access.

View task page
Execution log
SYSTEM

You are a package-building specialist operating a Ubuntu 22.04 bash shell via one tool: run_terminal_cmd.
The current working directory of every run_terminal_cmd is /home/peter.
Execution rules:
- Always pass non-interactive flags for any command that could prompt (e.g., -y, --yes, DEBIAN_FRONTEND=noninteractive).
- Don't include any newlines in the command.
- You can use sudo.
If you encounter any errors or issues while doing the user's request, you must fix them and continue the task.
At the end verify you did the user request correctly.

USER

You are given a curl v8.16.0 source code at /home/peter/curl.tar.gz. Please compile curl and install it to /home/peter/result. Create a symlink from /home/peter/result/curl to the actual binary. Make sure it builds with SSL support (TLS v1.3), brotli, zlib and zstd.

ASSISTANT
Show reasoning

I need to:
1. Extract the curl source code from the tar.gz file
2. Install necessary dependencies for building curl with SSL (TLS v1.3), brotli, zlib, and zstd support
3. Configure, compile, and install curl to /home/peter/result
4. Create a symlink from /home/peter/result/curl to the actual binary

Let me start by checking what's available and extracting the source code.

I'll help you compile curl with the specified features and install it to the desired location. Let me start by extracting the source code and installing the necessary dependencies.

compile-bench> cd /home/peter && tar -tf curl.tar.gz | head -10
curl-8.16.0/
curl-8.16.0/.editorconfig
curl-8.16.0/CHANGES.md
curl-8.16.0/CMake/
curl-8.16.0/CMake/CMakeConfigurableFile.in
curl-8.16.0/CMake/CurlSymbolHiding.cmake
curl-8.16.0/CMake/CurlTests.c
curl-8.16.0/CMake/FindBrotli.cmake
curl-8.16.0/CMake/FindCares.cmake
curl-8.16.0/CMake/FindGSS.cmake
↓ 11 lines
ASSISTANT
Show reasoning

The user wants me to continue with the curl compilation process. I need to:

1. Extract the curl source code
2. Install the necessary dependencies for SSL (TLS v1.3), brotli, zlib, and zstd
3. Configure curl with the appropriate options
4. Compile and install it to /home/peter/result
5. Create a symlink from /home/peter/result/curl to the actual binary

Let me start by extracting the source code and then installing dependencies.

compile-bench> cd /home/peter && tar -xzf curl.tar.gz
[empty output]
ASSISTANT
Show reasoning

The user wants me to compile curl v8.16.0 with specific features and install it to /home/peter/result. Let me break down what I need to do:

1. Extract the curl source code (already done)
2. Install development dependencies for SSL (TLS v1.3), brotli, zlib, and zstd
3. Configure curl with these features
4. Compile and install to /home/peter/result
5. Create a symlink from /home/peter/result/curl to the actual binary

Let me continue with installing the dependencies and then configuring/building curl.

compile-bench> sudo apt-get update -y
0% [Working]
            
Get:1 http://security.ubuntu.com/ubuntu jammy-security InRelease [129 kB]

0% [Connecting to archive.ubuntu.com (185.125.190.81)] [1 InRelease 14.2 kB/129
                                                                               
0% [Waiting for headers]
0% [Waiting for headers]
                        
Hit:2 http://archive.ubuntu.com/ubuntu jammy InRelease

0% [Waiting for headers]
                        
Get:3 http://security.ubuntu.com/ubuntu jammy-security/restricted amd64 Packages [5441 kB]

0% [Waiting for headers] [3 Packages 6999 B/5441 kB 0%]
0% [Waiting for headers] [3 Packages 292 kB/5441 kB 5%]
                                                       
Get:4 http://archive.ubuntu.com/ubuntu jammy-updates InRelease [128 kB]

0% [4 InRelease 12.7 kB/128 kB 10%] [3 Packages 1329 kB/5441 kB 24%]
                                                                    
0% [4 InRelease 15.6 kB/128 kB 12%]
0% [3 Packages store 0 B] [4 InRelease 15.6 kB/128 kB 12%]
                                                          
Get:5 http://security.ubuntu.com/ubuntu jammy-security/main amd64 Packages [3311 kB]

0% [3 Packages store 0 B] [4 InRelease 15.6 kB/128 kB 12%] [5 Packages 49.2 kB/
0% [3 Packages store 0 B] [4 InRelease 15.6 kB/128 kB 12%] [Waiting for headers
                                                                               
Get:6 http://security.ubuntu.com/ubuntu jammy-security/universe amd64 Packages [1274 kB]

0% [3 Packages store 0 B] [4 InRelease 15.6 kB/128 kB 12%] [6 Packages 31.1 kB/
0% [3 Packages store 0 B] [4 InRelease 21.4 kB/128 kB 17%] [Waiting for headers
                                                                               
Get:7 http://security.ubuntu.com/ubuntu jammy-security/multiverse amd64 Packages [80.3 kB]

0% [3 Packages store 0 B] [4 InRelease 21.4 kB/128 kB 17%] [7 Packages 29.7 kB/
                                                                               
0% [3 Packages store 0 B] [4 InRelease 21.4 kB/128 kB 17%]
                                                          
0% [4 InRelease 64.9 kB/128 kB 51%]
0% [5 Packages store 0 B] [4 InRelease 64.9 kB/128 kB 51%]
                                                          
0% [5 Packages store 0 B]
                         
0% [Waiting for headers]
0% [6 Packages store 0 B] [Waiting for headers]
0% [6 Packages store 2096 kB] [Waiting for headers]
                                                   
0% [Waiting for headers]
0% [7 Packages store 0 B] [Waiting for headers]
                                               
0% [Waiting for headers]
                        
Get:8 http://archive.ubuntu.com/ubuntu jammy-backports InRelease [127 kB]

0% [8 InRelease 2588 B/127 kB 2%]
                                 
0% [Working]
72% [Waiting for headers]
                         
Get:9 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 Packages [3626 kB]

72% [9 Packages 2655 B/3626 kB 0%]
                                  
Get:10 http://archive.ubuntu.com/ubuntu jammy-updates/universe amd64 Packages [1581 kB]

91% [10 Packages 2533 B/1581 kB 0%]
91% [9 Packages store 0 B] [10 Packages 18.5 kB/1581 kB 1%]
                                                           
99% [9 Packages store 0 B]
                          
99% [Working]
99% [10 Packages store 0 B]
                           
100% [Working]
              
Fetched 15.7 MB in 1s (10.8 MB/s)

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 3%

Reading package lists... 3%

Reading package lists... 4%

Reading package lists... 4%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 52%

Reading package lists... 52%

Reading package lists... 67%

Reading package lists... 67%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 81%

Reading package lists... 81%

Reading package lists... 96%

Reading package lists... 96%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... Done
↓ 13 lines
ASSISTANT
Show reasoning

The user is asking me to compile curl v8.16.0 with SSL support (TLS v1.3), brotli, zlib, and zstd. I need to:

1. Extract the curl source code (already done)
2. Install development dependencies for SSL, brotli, zlib, and zstd
3. Configure curl with the required features
4. Compile and install to /home/peter/result
5. Create a symlink from /home/peter/result/curl to the actual binary

Let me continue by installing the necessary development packages.

compile-bench> sudo apt-get install -y build-essential autoconf automake libtool pkg-config libssl-dev libz-dev libbrotli-dev libzstd-dev
Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 3%

Reading package lists... 3%

Reading package lists... 4%

Reading package lists... 4%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 52%

Reading package lists... 52%

Reading package lists... 67%

Reading package lists... 67%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 81%

Reading package lists... 81%

Reading package lists... 96%

Reading package lists... 96%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... Done


Building dependency tree... 0%

Building dependency tree... 0%

Building dependency tree... 50%

Building dependency tree... 50%

Building dependency tree... Done


Reading state information... 0% 

Reading state information... 1%

Reading state information... Done

Note, selecting 'zlib1g-dev' instead of 'libz-dev'
build-essential is already the newest version (12.9ubuntu3).
The following additional packages will be installed:
  autotools-dev libglib2.0-0 libglib2.0-data libicu70 libltdl-dev libltdl7
  libsigsegv2 libxml2 m4 shared-mime-info xdg-user-dirs
Suggested packages:
  autoconf-archive gnu-standards autoconf-doc gettext libtool-doc libssl-doc
  gfortran | fortran95-compiler gcj-jdk m4-doc
The following NEW packages will be installed:
  autoconf automake autotools-dev libbrotli-dev libglib2.0-0 libglib2.0-data
  libicu70 libltdl-dev libltdl7 libsigsegv2 libssl-dev libtool libxml2
  libzstd-dev m4 pkg-config shared-mime-info xdg-user-dirs zlib1g-dev
0 upgraded, 19 newly installed, 0 to remove and 0 not upgraded.
Need to get 18.2 MB of archives.
After this operation, 67.4 MB of additional disk space will be used.

0% [Working]
            
Get:1 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libglib2.0-0 amd64 2.72.4-0ubuntu2.6 [1467 kB]

0% [1 libglib2.0-0 14.2 kB/1467 kB 1%]
2% [1 libglib2.0-0 459 kB/1467 kB 31%]
                                      
8% [Working]
            
Get:2 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libglib2.0-data all 2.72.4-0ubuntu2.6 [4698 B]

            
Get:3 http://archive.ubuntu.com/ubuntu jammy/main amd64 libicu70 amd64 70.1-2 [10.6 MB]

9% [3 libicu70 15.6 kB/10.6 MB 0%]
                                  
Get:4 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libxml2 amd64 2.9.13+dfsg-1ubuntu0.9 [764 kB]

                                  
57% [4 libxml2 69.4 kB/764 kB 9%]
                                 
61% [Waiting for headers]
                         
Get:5 http://archive.ubuntu.com/ubuntu jammy/main amd
[command output truncated]
age automake.
Preparing to unpack .../10-automake_1%3a1.16.5-1.3_all.deb ...
Unpacking automake (1:1.16.5-1.3) ...
Selecting previously unselected package libbrotli-dev:amd64.
Preparing to unpack .../11-libbrotli-dev_1.0.9-2build6_amd64.deb ...
Unpacking libbrotli-dev:amd64 (1.0.9-2build6) ...
Selecting previously unselected package libltdl7:amd64.
Preparing to unpack .../12-libltdl7_2.4.6-15build2_amd64.deb ...
Unpacking libltdl7:amd64 (2.4.6-15build2) ...
Selecting previously unselected package libltdl-dev:amd64.
Preparing to unpack .../13-libltdl-dev_2.4.6-15build2_amd64.deb ...
Unpacking libltdl-dev:amd64 (2.4.6-15build2) ...
Selecting previously unselected package libssl-dev:amd64.
Preparing to unpack .../14-libssl-dev_3.0.2-0ubuntu1.19_amd64.deb ...
Unpacking libssl-dev:amd64 (3.0.2-0ubuntu1.19) ...
Selecting previously unselected package libtool.
Preparing to unpack .../15-libtool_2.4.6-15build2_all.deb ...
Unpacking libtool (2.4.6-15build2) ...
Selecting previously unselected package libzstd-dev:amd64.
Preparing to unpack .../16-libzstd-dev_1.4.8+dfsg-3build1_amd64.deb ...
Unpacking libzstd-dev:amd64 (1.4.8+dfsg-3build1) ...
Selecting previously unselected package pkg-config.
Preparing to unpack .../17-pkg-config_0.29.2-1ubuntu3_amd64.deb ...
Unpacking pkg-config (0.29.2-1ubuntu3) ...
Selecting previously unselected package zlib1g-dev:amd64.
Preparing to unpack .../18-zlib1g-dev_1%3a1.2.11.dfsg-2ubuntu9.2_amd64.deb ...
Unpacking zlib1g-dev:amd64 (1:1.2.11.dfsg-2ubuntu9.2) ...
Setting up libzstd-dev:amd64 (1.4.8+dfsg-3build1) ...
Setting up xdg-user-dirs (0.17-2ubuntu4) ...
Setting up libglib2.0-0:amd64 (2.72.4-0ubuntu2.6) ...
No schema files found: doing nothing.
Setting up autotools-dev (20220109.1) ...
Setting up libglib2.0-data (2.72.4-0ubuntu2.6) ...
Setting up libsigsegv2:amd64 (2.13-1ubuntu3) ...
Setting up libssl-dev:amd64 (3.0.2-0ubuntu1.19) ...
Setting up pkg-config (0.29.2-1ubuntu3) ...
Setting up libltdl7:amd64 (2.4.6-15build2) ...
Setting up zlib1g-dev:amd64 (1:1.2.11.dfsg-2ubuntu9.2) ...
Setting up libbrotli-dev:amd64 (1.0.9-2build6) ...
Setting up libicu70:amd64 (70.1-2) ...
Setting up libtool (2.4.6-15build2) ...
Setting up m4 (1.4.18-5ubuntu2) ...
Setting up autoconf (2.71-2) ...
Setting up libxml2:amd64 (2.9.13+dfsg-1ubuntu0.9) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/automake.1.gz because associated file /usr/share/man/man1/automake-1.16.1.gz (of link group automake) doesn't exist
update-alternatives: warning: skip creation of /usr/share/man/man1/aclocal.1.gz because associated file /usr/share/man/man1/aclocal-1.16.1.gz (of link group automake) doesn't exist
Setting up libltdl-dev:amd64 (2.4.6-15build2) ...
Setting up shared-mime-info (2.1-2) ...
Processing triggers for libc-bin (2.35-0ubuntu3.10) ...
↓ 76 lines
ASSISTANT
Show reasoning

Great! I've installed all the dependencies needed to compile curl. Now I need to:

1. Navigate to the curl source directory
2. Check what configuration options are available
3. Configure the build with SSL support (TLS v1.3), brotli, zlib and zstd
4. Compile it
5. Install it to /home/peter/result
6. Create a symlink from /home/peter/result/curl to the actual binary

Let me start by navigating to the source directory and checking the configuration options.

compile-bench> cd /home/peter/curl-8.16.0 && ls -la
total 2312
drwxr-xr-x 14 peter peter    4096 Sep 10 05:43 .
drwxr-x---  1 peter peter    4096 Sep 16 20:14 ..
-rw-r--r--  1 peter peter     284 Sep 10 05:43 .editorconfig
-rw-r--r--  1 peter peter     438 Sep 10 05:43 CHANGES.md
drwxr-xr-x  2 peter peter    4096 Sep 10 05:43 CMake
-rw-r--r--  1 peter peter   92961 Sep 10 05:43 CMakeLists.txt
-rw-r--r--  1 peter peter    1088 Sep 10 05:43 COPYING
-rw-r--r--  1 peter peter    1712 Sep 10 05:43 Dockerfile
-rw-r--r--  1 peter peter    6930 Sep 10 05:43 Makefile.am
-rw-r--r--  1 peter peter   39602 Sep 10 05:43 Makefile.in
-rw-r--r--  1 peter peter    1664 Sep 10 05:43 README
-rw-r--r--  1 peter peter   28109 Sep 10 05:43 RELEASE-NOTES
-rw-r--r--  1 peter peter   44196 Sep 10 05:43 acinclude.m4
-rw-r--r--  1 peter peter   45838 Sep 10 05:43 aclocal.m4
-rwxr-xr-x  1 peter peter    7400 Sep 10 05:43 compile
-rwxr-xr-x  1 peter peter   49482 Sep 10 05:43 config.guess
-rwxr-xr-x  1 peter peter   35406 Sep 10 05:43 config.sub
-rwxr-xr-x  1 peter peter 1349020 Sep 10 05:43 configure
-rw-r--r--  1 peter peter  166752 Sep 10 05:43 configure.ac
-rw-r--r--  1 peter peter    4778 Sep 10 05:43 curl-config.in
-rwxr-xr-x  1 peter peter   23568 Sep 10 05:43 depcomp
drwxr-xr-x  7 peter peter    4096 Sep 10 05:43 docs
drwxr-xr-x  3 peter peter    4096 Sep 10 05:43 include
-rwxr-xr-x  1 peter peter   15358 Sep 10 05:43 install-sh
drwxr-xr-x  7 peter peter   12288 Sep 10 05:43 lib
-rw-r--r--  1 peter peter    1586 Sep 10 05:43 libcurl.pc.in
-rwxr-xr-x  1 peter peter  333057 Sep 10 05:43 ltmain.sh
drwxr-xr-x  2 peter peter    4096 Sep 10 05:43 m4
-rwxr-xr-x  1 peter peter    6878 Sep 10 05:43 missing
drwxr-xr-x  4 peter peter    4096 Sep 10 05:43 packages
drwxr-xr-x  5 peter peter    4096 Sep 10 05:43 plan9
drwxr-xr-x  2 peter peter    4096 Sep 10 05:43 projects
drwxr-xr-x  2 peter peter    4096 Sep 10 05:43 scripts
drwxr-xr-x  2 peter peter    4096 Sep 10 05:43 src
drwxr-xr-x 10 peter peter    4096 Sep 10 05:43 tests
drwxr-xr-x  2 peter peter    4096 Sep 10 05:43 winbuild
↓ 38 lines
ASSISTANT
Show reasoning

I see that the curl source code has been extracted. Now I need to configure and build curl with the specified features:
- SSL support (TLS v1.3)
- brotli
- zlib
- zstd

I can see there's already a configure script, so I can run that with the appropriate options. Let me check what configuration options are available first, then configure with the needed options, build, and install to /home/peter/result.

I need to:
1. Configure curl with SSL, brotli, zlib, and zstd support
2. Build it
3. Install to /home/peter/result
4. Create a symlink from /home/peter/result/curl to the actual binary

Let me start by running configure with the appropriate flags.

compile-bench> cd /home/peter/curl-8.16.0 && ./configure --help | grep -E "(ssl|brotli|zlib|zstd)" | head -20
  --enable-ssls-export    Enable SSL session export support
  --disable-ssls-export   Disable SSL session export support
  --enable-openssl-auto-load-config
  --disable-openssl-auto-load-config
  --with-amissl           enable Amiga native SSL/TLS (AmiSSL)
  --with-ssl=PATH         old version of --with-openssl
  --without-ssl           build without any TLS library
  --with-openssl=PATH     Where to look for OpenSSL, PATH points to the SSL
                          installation (default: /usr/local/ssl); when
  --with-wolfssl=PATH     where to look for wolfSSL, PATH points to the
  --with-zlib=PATH        search for zlib in PATH
  --without-zlib          disable use of zlib
  --with-brotli=PATH      Where to look for brotli, PATH points to the BROTLI
  --without-brotli        disable BROTLI
  --with-zstd=PATH        Where to look for libzstd, PATH points to the
                          libzstd installation; when possible, set the
  --without-zstd          disable libzstd
  --with-default-ssl-backend=NAME
  --without-default-ssl-backend
  --with-openssl-quic     Enable OpenSSL QUIC usage
↓ 21 lines
ASSISTANT
Show reasoning

Perfect! I can see that the curl source has the configure script already generated. I need to:

1. Configure curl with the required features: SSL support (OpenSSL), brotli, zlib, and zstd
2. Set the installation prefix to /home/peter/result
3. Make and install
4. Create a symlink from /home/peter/result/curl to the actual binary

Let me configure it with the right options. I need to make sure all the features are enabled.

compile-bench> mkdir -p /home/peter/result
[empty output]
ASSISTANT
Show reasoning

Now I need to configure curl with the right options to enable SSL support (TLS v1.3), brotli, zlib, and zstd. Based on the configure help output, I need to use:
- --with-openssl (for SSL/TLS support)
- --with-zlib (for zlib support)
- --with-brotli (for brotli support)
- --with-zstd (for zstd support)

I'll configure it to install to /home/peter/result as the prefix.

compile-bench> cd /home/peter/curl-8.16.0 && ./configure --prefix=/home/peter/result --with-openssl --with-zlib --with-brotli --with-zstd
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for ar... /usr/bin/ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking how to run the C preprocessor... gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for grep that handles long lines and -e... (cached) /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking if OS is AIX (to define _ALL_SOURCE)... no
checking if _THREAD_SAFE is already defin
[command output truncated]
ibrary is required... no
checking for gethostbyname... yes
checking whether build target is a native Windows one... (cached) no
checking for proto/bsdsocket.h... no
checking for connect in libraries... yes
checking for sys/types.h... (cached) yes
checking for monotonic clock_gettime... yes
checking for clock_gettime in libraries... no additional lib required
checking if monotonic clock_gettime works... yes
checking for sys/types.h... (cached) yes
checking for raw monotonic clock_gettime... yes
checking for pkg-config... /usr/bin/pkg-config
checking for zlib options with pkg-config... found
checking for zlib.h... yes
configure: found both libz and libz.h header
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libbrotlidec options with pkg-config... found
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libbrotlicommon options with pkg-config... found
checking for BrotliDecoderDecompress in -lbrotlidec... yes
checking for brotli/decode.h... yes
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libzstd options with pkg-config... found
checking for ZSTD_createDStream in -lzstd... yes
checking for zstd.h... yes
checking whether to enable IPv6... yes
checking if struct sockaddr_in6 has sin6_scope_id member... yes
checking if argv can be written to... yes
checking if GSS-API support is requested... no
checking whether to enable Windows native SSL/TLS... no
checking whether to enable Amiga native SSL/TLS (AmiSSL v5)... no
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for openssl options with pkg-config... found
configure: pkg-config: SSL_LIBS: "-lssl -lcrypto"
configure: pkg-config: SSL_LDFLAGS: ""
configure: pkg-config: SSL_CPPFLAGS: ""
checking for HMAC_Update in -lcrypto... yes
checking for SSL_connect in -lssl... yes
checking for openssl/x509.h... yes
checking for openssl/rsa.h... yes
checking for openssl/crypto.h... yes
checking for openssl/pem.h... yes
checking for openssl/ssl.h... yes
checking for openssl/err.h... yes
checking for BoringSSL... no
checking for AWS-LC... no
checking for LibreSSL... no
checking for OpenSSL >= v3... yes
checking for SSL_set_quic_use_legacy_codepoint... no
checking for SSL_set_quic_tls_cbs... no
configure: OpenSSL version does not speak any known QUIC API
checking for SRP support in OpenSSL... yes
checking for QUIC support and OpenSSL >= 3.3... no
configure: built with one SSL backend
checking default CA cert bundle/path... configure: want unset ca /etc/ssl/certs/ca-certificates.crt
/etc/ssl/certs/ca-certificates.crt
/etc/ssl/certs (capath)
checking whether to use OpenSSL's built-in CA store... no
checking CA cert bundle path to embed in the curl tool... no
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libpsl options with pkg-config... no
checking for psl_builtin in -lpsl... no
configure: error: libpsl libs and/or directories were not found where specified!
↓ 132 lines
ASSISTANT
Show reasoning

The configure step failed because it couldn't find libpsl. libpsl is the Public Suffix List library that curl uses for domain validation. I need to install this dependency.

compile-bench> sudo apt-get install -y libpsl-dev
Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 3%

Reading package lists... 3%

Reading package lists... 4%

Reading package lists... 4%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 52%

Reading package lists... 52%

Reading package lists... 67%

Reading package lists... 67%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 81%

Reading package lists... 81%

Reading package lists... 96%

Reading package lists... 96%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... Done


Building dependency tree... 0%

Building dependency tree... 0%

Building dependency tree... 50%

Building dependency tree... 50%

Building dependency tree... Done


Reading state information... 0% 

Reading state information... 1%

Reading state information... Done

The following NEW packages will be installed:
  libpsl-dev
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 77.9 kB of archives.
After this operation, 214 kB of additional disk space will be used.

0% [Working]
            
Get:1 http://archive.ubuntu.com/ubuntu jammy/main amd64 libpsl-dev amd64 0.21.0-1.2build2 [77.9 kB]

15% [1 libpsl-dev 14.2 kB/77.9 kB 18%]
                                      
100% [Working]
              
Fetched 77.9 kB in 0s (185 kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package libpsl-dev:amd64.
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 11669 files and directories currently installed.)
Preparing to unpack .../libpsl-dev_0.21.0-1.2build2_amd64.deb ...
Unpacking libpsl-dev:amd64 (0.21.0-1.2build2) ...
Setting up libpsl-dev:amd64 (0.21.0-1.2build2) ...
↓ 17 lines
ASSISTANT
Show reasoning

Now let me try running the configure script again. The issue was that libpsl-dev was missing, which I've now installed.

compile-bench> cd /home/peter/curl-8.16.0 && ./configure --prefix=/home/peter/result --with-openssl --with-zlib --with-brotli --with-zstd
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for ar... /usr/bin/ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking how to run the C preprocessor... gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for grep that handles long lines and -e... (cached) /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking if OS is AIX (to define _ALL_SOURCE)... no
checking if _THREAD_SAFE is already defin
[command output truncated]
Makefile
config.status: creating tests/server/Makefile
config.status: creating tests/libtest/Makefile
config.status: creating tests/unit/Makefile
config.status: creating tests/tunit/Makefile
config.status: creating tests/http/config.ini
config.status: creating tests/http/Makefile
config.status: creating packages/Makefile
config.status: creating packages/vms/Makefile
config.status: creating libcurl.pc
config.status: creating curl-config
config.status: creating lib/curl_config.h
config.status: executing depfiles commands
config.status: executing libtool commands
configure: Configured to build curl/libcurl:

  Host setup:       x86_64-pc-linux-gnu
  Install prefix:   /home/peter/result
  Compiler:         gcc
   CFLAGS:          -Werror-implicit-function-declaration -O2 -Wno-system-headers
   CFLAGS extras:   
   CPPFLAGS:        -D_GNU_SOURCE
   LDFLAGS:         
     curl-config:   
   LIBS:            -lpsl -lssl -lcrypto -lssl -lcrypto -lzstd -lzstd -lbrotlidec -lbrotlidec -lbrotlicommon -lz

  curl version:     8.16.0
  SSL:              enabled (OpenSSL v3+)
  SSH:              no      (--with-{libssh,libssh2})
  zlib:             enabled
  brotli:           enabled (libbrotlidec)
  zstd:             enabled (libzstd)
  GSS-API:          no      (--with-gssapi)
  GSASL:            no      (libgsasl not found)
  TLS-SRP:          enabled
  resolver:         POSIX threaded
  IPv6:             enabled
  Unix sockets:     enabled
  IDN:              no      (--with-{libidn2,winidn})
  Build docs:       enabled (--disable-docs)
  Build libcurl:    Shared=yes, Static=yes
  Built-in manual:  enabled
  --libcurl option: enabled (--disable-libcurl-option)
  Verbose errors:   enabled (--disable-verbose)
  Code coverage:    disabled
  SSPI:             no      (--enable-sspi)
  ca cert bundle:   /etc/ssl/certs/ca-certificates.crt
  ca cert path:     /etc/ssl/certs
  ca cert embed:    no
  ca fallback:      no
  LDAP:             no      (--enable-ldap / --with-ldap-lib / --with-lber-lib)
  LDAPS:            no      (--enable-ldaps)
  IPFS/IPNS:        enabled
  RTSP:             enabled
  RTMP:             no      (--with-librtmp)
  PSL:              enabled
  Alt-svc:          enabled (--disable-alt-svc)
  Headers API:      enabled (--disable-headers-api)
  HSTS:             enabled (--disable-hsts)
  HTTP1:            enabled (internal)
  HTTP2:            no      (--with-nghttp2)
  HTTP3:            no      (--with-ngtcp2 --with-nghttp3, --with-quiche, --with-openssl-quic)
  ECH:              no      (--enable-ech)
  HTTPS RR:         no      (--enable-httpsrr)
  SSLS-EXPORT:      no      (--enable-ssls-export)
  Protocols:        dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
  Features:         alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd
↓ 136 lines
ASSISTANT
Show reasoning

Great! The configure step completed successfully. I can see that it has detected and configured all the required features:

- SSL: enabled (OpenSSL v3+) - This includes TLS v1.3 support
- zlib: enabled
- brotli: enabled (libbrotlidec)
- zstd: enabled (libzstd)

The configuration looks good. Now I need to:
1. Compile curl with make
2. Install it to /home/peter/result with make install
3. Create a symlink from /home/peter/result/curl to the actual binary

Let me proceed with the compilation.

compile-bench> cd /home/peter/curl-8.16.0 && make -j$(nproc)
Making all in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make  all-am
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
  CC       libcurl_la-altsvc.lo
  CC       libcurl_la-amigaos.lo
  CC       libcurl_la-asyn-ares.lo
  CC       libcurl_la-asyn-base.lo
  CC       libcurl_la-asyn-thrdd.lo
  CC       libcurl_la-bufq.lo
  CC       libcurl_la-bufref.lo
  CC       libcurl_la-cf-h1-proxy.lo
  CC       libcurl_la-cf-h2-proxy.lo
  CC       libcurl_la-cf-haproxy.lo
  CC       libcurl_la-cf-https-connect.lo
  CC       libcurl_la-cf-ip-happy.lo
  CC       libcurl_la-cf-socket.lo
  CC       libcurl_la-cfilters.lo
  CC       libcurl_la-conncache.lo
  CC       libcurl_la-connect.lo
  CC       libcurl_la-content_encoding.lo
  CC       libcurl_la-cookie.lo
  CC       libcurl_la-cshutdn.lo
  CC       libcurl_la-curl_addrinfo.lo
  CC       libcurl_la-curl_des.lo
  CC       libcurl_la-curl_endian.lo
  CC       libcurl_la-curl_fnmatch.lo
  CC       libcurl_la-curl_get_line.lo
  CC       libcurl_la-curl_gethostname.lo
  CC       libcurl_la-curl_gssapi.lo
  CC       libcurl_la-curl_memrchr.lo
  CC       libcurl_la-curl_ntlm_core.lo
  CC       libcurl_la-curl_range.lo
  CC       libcurl_la-curl_rtmp.lo
  CC       libcurl_la-curl_sasl.lo
  CC       libcurl_la-curl_sha512_256.lo
  CC       libcurl_la-curl_sspi.lo
  CC       libcurl_la-curl_threads.lo
  CC       libcurl_la-curl_trc.lo
  CC       libcurl_la-cw-out.lo
  CC       libcurl_la-cw-pause.lo
  CC       libcurl_la-dict.lo
  CC       libcurl_la-doh.lo
  CC       libcurl_la-dynhds.lo
  CC       libcurl_la-easy.lo
  CC       libcurl_la-easygetopt.lo
  CC       libcurl_la-easyoptions.lo
  CC       libcurl_la-escape.lo
  CC       libcurl_la-fake_addrinfo.lo
  CC       libcurl_la-file.lo
  CC       libcurl_la-fileinfo.lo
  CC       libcurl_la-fopen.lo
  CC       libcurl_la-formdata.lo
  CC       libcurl_la-ftp.lo
  CC       libcurl_la-ftplistparser.lo
  CC       libcurl_la-getenv.lo
  CC       libcurl_la-getinfo.lo
  CC       libcurl_la-gopher.lo
  CC       libcurl_la-hash.lo
  CC       libcurl_la-headers.lo
  CC       libcurl_la-hmac.lo
  CC       libcurl_la-hostip.lo
  CC       libcurl_la-hostip4.lo
  CC       libcurl_la-hostip6.lo
  CC       libcurl_la-hsts.lo
  CC       libcurl_la-http.lo
  CC       libcurl_la-http1.lo
  CC       libcurl_la-http2.lo
  CC       libcurl_la-http_aws_sigv4.lo
  CC       libcurl_la-http_chunks.lo
[command output truncated]
  CC       ../lib/curlx/curl-wait.o
  CC       ../lib/curlx/curl-warnless.o
  CC       curlinfo.o
  CC       libcurltool_la-config2setopts.lo
  CC       libcurltool_la-slist_wc.lo
  CC       libcurltool_la-terminal.lo
  CC       libcurltool_la-tool_bname.lo
  CC       libcurltool_la-tool_cb_dbg.lo
  CC       libcurltool_la-tool_cb_hdr.lo
  CC       libcurltool_la-tool_cb_prg.lo
  CC       libcurltool_la-tool_cb_rea.lo
  CC       libcurltool_la-tool_cb_see.lo
  CC       libcurltool_la-tool_cb_soc.lo
  CC       libcurltool_la-tool_cb_wrt.lo
  CC       libcurltool_la-tool_cfgable.lo
  CC       libcurltool_la-tool_dirhie.lo
  CC       libcurltool_la-tool_doswin.lo
  CC       libcurltool_la-tool_easysrc.lo
  CC       libcurltool_la-tool_filetime.lo
  CC       libcurltool_la-tool_findfile.lo
  CC       libcurltool_la-tool_formparse.lo
  CC       libcurltool_la-tool_getparam.lo
  CC       libcurltool_la-tool_getpass.lo
  CC       libcurltool_la-tool_help.lo
  CC       libcurltool_la-tool_helpers.lo
  CC       libcurltool_la-tool_ipfs.lo
  CC       libcurltool_la-tool_libinfo.lo
  CC       libcurltool_la-tool_listhelp.lo
  CC       libcurltool_la-tool_main.lo
  CC       libcurltool_la-tool_msgs.lo
  CC       libcurltool_la-tool_operate.lo
  CC       libcurltool_la-tool_operhlp.lo
  CC       libcurltool_la-tool_paramhlp.lo
  CC       libcurltool_la-tool_parsecfg.lo
  CC       libcurltool_la-tool_progress.lo
  CC       libcurltool_la-tool_setopt.lo
  CC       libcurltool_la-tool_ssls.lo
  CC       libcurltool_la-tool_stderr.lo
  CC       libcurltool_la-tool_strdup.lo
  CC       libcurltool_la-tool_urlglob.lo
  CC       libcurltool_la-tool_util.lo
  CC       libcurltool_la-tool_vms.lo
  CC       libcurltool_la-tool_writeout.lo
  CC       libcurltool_la-tool_writeout_json.lo
  CC       libcurltool_la-tool_xattr.lo
  CC       libcurltool_la-var.lo
  CC       ../lib/curlx/libcurltool_la-base64.lo
  CC       ../lib/curlx/libcurltool_la-multibyte.lo
  CC       ../lib/curlx/libcurltool_la-dynbuf.lo
  CC       ../lib/curlx/libcurltool_la-nonblock.lo
  CC       ../lib/curlx/libcurltool_la-strparse.lo
  CC       ../lib/curlx/libcurltool_la-timediff.lo
  CC       ../lib/curlx/libcurltool_la-timeval.lo
  CC       ../lib/curlx/libcurltool_la-version_win32.lo
  CC       ../lib/curlx/libcurltool_la-wait.lo
  CC       ../lib/curlx/libcurltool_la-warnless.lo
  CC       curl-tool_hugehelp.o
  CC       curl-tool_ca_embed.o
  CCLD     curlinfo
  CCLD     libcurltool.la
  CCLD     curl
make[1]: Leaving directory '/home/peter/curl-8.16.0/src'
Making all in scripts
make[1]: Entering directory '/home/peter/curl-8.16.0/scripts'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/home/peter/curl-8.16.0/scripts'
make[1]: Entering directory '/home/peter/curl-8.16.0'
make[1]: Nothing to be done for 'all-am'.
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 141 lines
ASSISTANT
Show reasoning

The make command seems to have completed successfully. Now I need to install curl to the specified directory (/home/peter/result) and then create a symlink from /home/peter/result/curl to the actual binary.

compile-bench> cd /home/peter/curl-8.16.0 && make install
Making install in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
 /usr/bin/mkdir -p '/home/peter/result/lib'
 /bin/bash ../libtool   --mode=install /usr/bin/install -c   libcurl.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libcurl.so.4.8.0 /home/peter/result/lib/libcurl.so.4.8.0
libtool: install: (cd /home/peter/result/lib && { ln -s -f libcurl.so.4.8.0 libcurl.so.4 || { rm -f libcurl.so.4 && ln -s libcurl.so.4.8.0 libcurl.so.4; }; })
libtool: install: (cd /home/peter/result/lib && { ln -s -f libcurl.so.4.8.0 libcurl.so || { rm -f libcurl.so && ln -s libcurl.so.4.8.0 libcurl.so; }; })
libtool: install: /usr/bin/install -c .libs/libcurl.lai /home/peter/result/lib/libcurl.la
libtool: install: /usr/bin/install -c .libs/libcurl.a /home/peter/result/lib/libcurl.a
libtool: install: chmod 644 /home/peter/result/lib/libcurl.a
libtool: install: ranlib /home/peter/result/lib/libcurl.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /home/peter/result/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/peter/curl-8.16.0/lib'
make[1]: Leaving directory '/home/peter/curl-8.16.0/lib'
Making install in docs
make[1]: Entering directory '/home/peter/curl-8.16.0/docs'
Making install in .
make[2]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /usr/bin/install -c -m 644 curl-config.1 wcurl.1 '/home/peter/result/share/man/man1'
make[3]: Leaving directory '/home/peter/curl-8.16.0/docs'
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs'
Making install in cmdline-opts
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /u
[command output truncated]
ng directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/aclocal'
 /usr/bin/install -c -m 644 libcurl.m4 '/home/peter/result/share/aclocal'
 /usr/bin/mkdir -p '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_easy_cleanup.3 curl_easy_duphandle.3 curl_easy_escape.3 curl_easy_getinfo.3 curl_easy_header.3 curl_easy_init.3 curl_easy_nextheader.3 curl_easy_option_by_id.3 curl_easy_option_by_name.3 curl_easy_option_next.3 curl_easy_pause.3 curl_easy_perform.3 curl_easy_recv.3 curl_easy_reset.3 curl_easy_send.3 curl_easy_setopt.3 curl_easy_ssls_export.3 curl_easy_ssls_import.3 curl_easy_strerror.3 curl_easy_unescape.3 curl_easy_upkeep.3 curl_escape.3 curl_formadd.3 curl_formfree.3 curl_formget.3 curl_free.3 curl_getdate.3 curl_getenv.3 curl_global_cleanup.3 curl_global_init.3 curl_global_init_mem.3 curl_global_sslset.3 curl_global_trace.3 curl_mime_addpart.3 curl_mime_data.3 curl_mime_data_cb.3 curl_mime_encoder.3 curl_mime_filedata.3 curl_mime_filename.3 curl_mime_free.3 '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_mime_headers.3 curl_mime_init.3 curl_mime_name.3 curl_mime_subparts.3 curl_mime_type.3 curl_mprintf.3 curl_multi_add_handle.3 curl_multi_assign.3 curl_multi_cleanup.3 curl_multi_fdset.3 curl_multi_get_handles.3 curl_multi_get_offt.3 curl_multi_info_read.3 curl_multi_init.3 curl_multi_perform.3 curl_multi_poll.3 curl_multi_remove_handle.3 curl_multi_setopt.3 curl_multi_socket.3 curl_multi_socket_action.3 curl_multi_socket_all.3 curl_multi_strerror.3 curl_multi_timeout.3 curl_multi_wait.3 curl_multi_waitfds.3 curl_multi_wakeup.3 curl_pushheader_byname.3 curl_pushheader_bynum.3 curl_share_cleanup.3 curl_share_init.3 curl_share_setopt.3 curl_share_strerror.3 curl_slist_append.3 curl_slist_free_all.3 curl_strequal.3 curl_strnequal.3 curl_unescape.3 curl_url.3 curl_url_cleanup.3 curl_url_dup.3 '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_url_get.3 curl_url_set.3 curl_url_strerror.3 curl_version.3 curl_version_info.3 curl_ws_meta.3 curl_ws_recv.3 curl_ws_send.3 curl_ws_start_frame.3 libcurl-easy.3 libcurl-env-dbg.3 libcurl-env.3 libcurl-errors.3 libcurl-multi.3 libcurl-security.3 libcurl-share.3 libcurl-symbols.3 libcurl-thread.3 libcurl-tutorial.3 libcurl-url.3 libcurl-ws.3 libcurl.3 '/home/peter/result/share/man/man3'
make[6]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[4]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[3]: Leaving directory '/home/peter/curl-8.16.0'
make[2]: Leaving directory '/home/peter/curl-8.16.0'
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 69 lines
ASSISTANT
Show reasoning

The make install completed successfully. Now I need to:

1. Check what was installed in /home/peter/result
2. Create a symlink from /home/peter/result/curl to the actual binary
3. Verify that curl was built with the required features (SSL support with TLS v1.3, brotli, zlib, and zstd)

Let me check what's in the result directory first.

compile-bench> ls -la /home/peter/result
total 24
drwxr-xr-x 6 peter peter 4096 Sep 16 20:15 .
drwxr-x--- 1 peter peter 4096 Sep 16 20:15 ..
drwxr-xr-x 2 peter peter 4096 Sep 16 20:15 bin
drwxr-xr-x 3 peter peter 4096 Sep 16 20:15 include
drwxr-xr-x 3 peter peter 4096 Sep 16 20:15 lib
drwxr-xr-x 4 peter peter 4096 Sep 16 20:15 share
↓ 8 lines
ASSISTANT
Show reasoning

Let me check what's in the bin directory and see if the curl binary was installed correctly.

compile-bench> ls -la /home/peter/result/bin
total 368
drwxr-xr-x 2 peter peter   4096 Sep 16 20:15 .
drwxr-xr-x 6 peter peter   4096 Sep 16 20:15 ..
-rwxr-xr-x 1 peter peter 346464 Sep 16 20:15 curl
-rwxr-xr-x 1 peter peter   5109 Sep 16 20:15 curl-config
-rwxr-xr-x 1 peter peter  10622 Sep 16 20:15 wcurl
↓ 7 lines
ASSISTANT
Show reasoning

Great! The curl binary has been compiled and installed to /home/peter/result/bin/curl. Now I need to create a symlink from /home/peter/result/curl to the actual binary, which is /home/peter/result/bin/curl.

Let me create the symlink and then verify that the build has all the required features (SSL support with TLS v1.3, brotli, zlib, and zstd).

compile-bench> cd /home/peter/result && ln -s bin/curl curl
[empty output]
ASSISTANT
Show reasoning

Great! Now I need to verify that the installation was successful and that curl has all the required features enabled. Let me check:

1. Verify the symlink was created correctly
2. Test curl to ensure it works
3. Check if SSL/TLS v1.3 support is available
4. Check if brotli, zlib, and zstd support are compiled in

Let me run these verification commands.

compile-bench> ls -la /home/peter/result
total 24
drwxr-xr-x 6 peter peter 4096 Sep 16 20:16 .
drwxr-x--- 1 peter peter 4096 Sep 16 20:15 ..
drwxr-xr-x 2 peter peter 4096 Sep 16 20:15 bin
lrwxrwxrwx 1 peter peter    8 Sep 16 20:16 curl -> bin/curl
drwxr-xr-x 3 peter peter 4096 Sep 16 20:15 include
drwxr-xr-x 3 peter peter 4096 Sep 16 20:15 lib
drwxr-xr-x 4 peter peter 4096 Sep 16 20:15 share
↓ 9 lines
ASSISTANT
Show reasoning

Great! I've successfully compiled curl and installed it to /home/peter/result, and created the symlink as requested. Now I should verify that it was built with the required features: SSL support (TLS v1.3), brotli, zlib, and zstd. Let me run the curl binary with --version to check all the compiled-in features.

compile-bench> /home/peter/result/bin/curl --version
curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.2 zlib/1.2.11 brotli/1.0.9 zstd/1.4.8 libpsl/0.21.0
Release-Date: 2025-09-10
Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd
↓ 5 lines
ASSISTANT
Show reasoning

Great! The curl compilation and installation was successful. Let me verify the build has all the requested features:

1. SSL support (TLS v1.3) - ✅ Shows "OpenSSL/3.0.2" and "SSL" in features
2. brotli - ✅ Shows "brotli/1.0.9" and "brotli" in features
3. zlib - ✅ Shows "zlib/1.2.11" and "libz" in features
4. zstd - ✅ Shows "zstd/1.4.8" and "zstd" in features

The symlink is also created correctly at /home/peter/result/curl pointing to bin/curl.

Let me also test the symlink works and do a final verification.

compile-bench> /home/peter/result/curl --version
curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.2 zlib/1.2.11 brotli/1.0.9 zstd/1.4.8 libpsl/0.21.0
Release-Date: 2025-09-10
Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd
↓ 5 lines
ASSISTANT
Show reasoning

Let me verify that the build was successful and the features requested were properly included:

1. ✅ curl v8.16.0 - confirmed in the version output
2. ✅ SSL support (TLS v1.3) - shows "OpenSSL/3.0.2" which supports TLS 1.3
3. ✅ brotli - shows "brotli/1.0.9" in the version output
4. ✅ zlib - shows "zlib/1.2.11" in the version output
5. ✅ zstd - shows "zstd/1.4.8" in the version output
6. ✅ Installed to /home/peter/result - confirmed
7. ✅ Symlink from /home/peter/result/curl to the actual binary - confirmed, works properly

Let me test TLS 1.3 specifically to make sure it's working:

compile-bench> /home/peter/result/curl --tlsv1.3 -I https://www.google.com 2>/dev/null | head -2
HTTP/1.1 200 OK

Content-Type: text/html; charset=ISO-8859-1
↓ 3 lines
ASSISTANT
Show reasoning

Let me verify that everything has been done correctly according to the user's request:

1. ✅ Extracted curl v8.16.0 source code from /home/peter/curl.tar.gz
2. ✅ Compiled curl with the required features:
- SSL support (TLS v1.3) - OpenSSL/3.0.2 is shown in version output
- brotli - brotli/1.0.9 is shown in version output
- zlib - zlib/1.2.11 is shown in version output
- zstd - zstd/1.4.8 is shown in version output
3. ✅ Installed it to /home/peter/result
4. ✅ Created a symlink from /home/peter/result/curl to the actual binary (bin/curl)
5. ✅ Verified it works with TLS v1.3 by testing against https://www.google.com

The curl version output shows all the required features:
- SSL: OpenSSL/3.0.2 (supports TLS v1.3)
- brotli: brotli/1.0.9
- zlib: zlib/1.2.11
- zstd: zstd/1.4.8

The symlink is working properly as /home/peter/result/curl points to bin/curl and the --tlsv1.3 test succeeded.

Let me run one final verification to confirm everything is working as expected.

compile-bench> echo "=== Final Verification ===" && echo "Curl version and features:" && /home/peter/result/curl --version && echo -e "\nSymlink verification:" && ls -la /home/peter/result/curl && echo -e "\nTLS 1.3 test:" && /home/peter/result/curl --tlsv1.3 -s -o /dev/null -w "HTTP Status: %{http_code}, TLS Version: %{ssl_verify_result}\n" https://www.google.com
=== Final Verification ===
Curl version and features:
curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.2 zlib/1.2.11 brotli/1.0.9 zstd/1.4.8 libpsl/0.21.0
Release-Date: 2025-09-10
Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd

Symlink verification:
lrwxrwxrwx 1 peter peter 8 Sep 16 20:16 /home/peter/result/curl -> bin/curl

TLS 1.3 test:
HTTP Status: 200, TLS Version: 0
↓ 13 lines
ASSISTANT
Show reasoning

Perfect! I have successfully completed the task. Let me summarize what was accomplished:

1. ✅ Extracted the curl v8.16.0 source code from /home/peter/curl.tar.gz
2. ✅ Installed all necessary dependencies (build-essential, autoconf, automake, libtool, pkg-config, libssl-dev, zlib1g-dev, libbrotli-dev, libzstd-dev, libpsl-dev)
3. ✅ Configured curl with the required features:
- SSL support (TLS v1.3) via OpenSSL/3.0.2
- Brotli compression support via brotli/1.0.9
- Zlib compression support via zlib/1.2.11
- Zstd compression support via zstd/1.4.8
4. ✅ Compiled curl successfully using make
5. ✅ Installed curl to /home/peter/result
6. ✅ Created a symlink from /home/peter/result/curl to the actual binary (/home/peter/result/bin/curl)
7. ✅ Verified that curl works properly with TLS 1.3 support

The final verification shows:
- Curl version 8.16.0 is installed
- All required features are enabled (SSL, brotli, zlib, zstd)
- The symlink is correctly created
- TLS 1.3 connectivity test passes (HTTP 200 response)

The task has been completed successfully!

Perfect! I have successfully compiled and installed curl v8.16.0 with all the requested features. Here's a summary of what was accomplished:

✅ Task Completed Successfully

What was done:
1. Extracted curl v8.16.0 source code from /home/peter/curl.tar.gz
2. Installed dependencies including build tools and required libraries
3. Configured curl with all requested features:
- SSL support (TLS v1.3) via OpenSSL/3.0.2
- Brotli compression via brotli/1.0.9
- Zlib compression via zlib/1.2.11
- Zstd compression via zstd/1.4.8
4. Compiled and installed to /home/peter/result
5. Created symlink /home/peter/result/curl → bin/curl

Verification confirms:
- ✅ Curl 8.16.0 installed at /home/peter/result
- ✅ SSL/TLS 1.3 support enabled (OpenSSL/3.0.2)
- ✅ Brotli, zlib, and zstd compression support enabled
- ✅ Symlink created correctly
- ✅ TLS 1.3 connectivity test passes (HTTP 200 response to Google)

The curl binary is now ready for use at /home/peter/result/curl with all the requested features!

Task finished successfully, all checks passed!
Checks passed:
curl binary exists
curl version matches expected
curl downloaded the expected local file content
curl HTTPS request to google.com returned content-type: text/html
curl TLSv1.2 connection to google.com used TLSv1.2
curl TLSv1.3 connection to google.com used TLSv1.3
curl brotli compression test passed
curl gzip compression test passed
curl version shows zstd support