<- Ranking
Summary
Task
curl
Model
claude-sonnet-4-thinking-16k logo
claude-sonnet-4-thinking-16k
Status
Success
Performance
Cost$0.126
Total elapsed time1m40s
LLM inference time1m21s
Command execution time19s
Commands executed14
All details >
Attempt ID b8j5yhsiyefwy Attempt group run-16-09-22-05
Revision fb5c74bd2fee AWS Instance m8i.2xlarge
Start time 2025-09-16T21:46:12.977Z End time 2025-09-16T21:47:52.965Z
Task curl Environment ubuntu-22.04-amd64-offline
Model claude-sonnet-4-thinking-16k logo claude-sonnet-4-thinking-16k OpenRouter slug anthropic/claude-sonnet-4
Temperature 1 Explicit prompt caching true
User msg after tool call true Max tool calls 70
Total timeout seconds 900 Single command timeout 600
Cost $0.126 Duration 1m40s
LLM inference time 1m21s Command execution time 19s
Final context tokens 11,460 Total output tokens 3,463
Output reasoning tokens 1,776 Messages 31
Assistant messages 15 User messages 1
System messages 1 Commands executed 14
Download full attempt result JSON
Task
Task: curl

curl 8.16.0 is a command-line HTTP client.
Project link: curl.se

Task:
Compile and install curl to a specific location.

Difficulties:
Standard build, nothing special.

Environment:
Ubuntu 22.04 on amd64, without internet access.

View task page
Execution log
SYSTEM

You are a package-building specialist operating a Ubuntu 22.04 bash shell via one tool: run_terminal_cmd.
The current working directory of every run_terminal_cmd is /home/peter.
Execution rules:
- Always pass non-interactive flags for any command that could prompt (e.g., -y, --yes, DEBIAN_FRONTEND=noninteractive).
- Don't include any newlines in the command.
- The environment is offline, assume you have all the necessary tools already installed.
If you encounter any errors or issues while doing the user's request, you must fix them and continue the task.
At the end verify you did the user request correctly.

USER

You are given a curl v8.16.0 source code at /home/peter/curl.tar.gz. Please compile curl and install it to /home/peter/result. Create a symlink from /home/peter/result/curl to the actual binary. Make it build even if some third party dependencies are not available.

ASSISTANT
Show reasoning

I need to:
1. Extract the curl source code from the tar.gz file
2. Compile curl and install it to /home/peter/result
3. Create a symlink from /home/peter/result/curl to the actual binary
4. Make sure it builds even if some dependencies are missing

Let me start by extracting the source code and then examining what we have.

The typical build process for curl would be:
1. Extract the tarball
2. Configure the build (usually with ./configure)
3. Compile with make
4. Install to the specified directory

I need to make sure to configure it so it builds even without optional dependencies.

I'll help you compile curl and install it to the specified directory. Let me start by extracting the source code and then building it.

compile-bench> cd /home/peter && tar -xzf curl.tar.gz
[empty output]
ASSISTANT
Show reasoning

The user is waiting for me to continue. I extracted the curl source code, now I need to:
1. Check what directory was created
2. Navigate to it
3. Configure the build with minimal dependencies to avoid issues with missing third-party dependencies
4. Compile it
5. Install it to /home/peter/result
6. Create a symlink from /home/peter/result/curl to the actual binary

Let me check what directory was created first.

compile-bench> cd /home/peter && ls -la
total 4108
drwxr-x---  1 peter peter    4096 Sep 16 21:46 .
drwxr-xr-x  1 root  root     4096 Sep 15 11:21 ..
-rw-r--r--  1 peter peter     220 Jan  6  2022 .bash_logout
-rw-r--r--  1 peter peter    3771 Jan  6  2022 .bashrc
-rw-r--r--  1 peter peter     807 Jan  6  2022 .profile
drwxr-xr-x 14 peter peter    4096 Sep 10 05:43 curl-8.16.0
-rw-r--r--  1 peter peter 4176617 Sep 16 21:46 curl.tar.gz
↓ 9 lines
ASSISTANT
Show reasoning

Good, I can see that the curl.tar.gz file has been extracted to curl-8.16.0 directory. Now I need to:

1. Go into the curl-8.16.0 directory
2. Configure the build to be resilient to missing dependencies
3. Compile curl
4. Install it to /home/peter/result
5. Create a symlink from /home/peter/result/curl to the actual binary

Let me start by exploring the curl source directory and then configure it.

compile-bench> cd /home/peter/curl-8.16.0 && ls -la
total 2312
drwxr-xr-x 14 peter peter    4096 Sep 10 05:43 .
drwxr-x---  1 peter peter    4096 Sep 16 21:46 ..
-rw-r--r--  1 peter peter     284 Sep 10 05:43 .editorconfig
-rw-r--r--  1 peter peter     438 Sep 10 05:43 CHANGES.md
drwxr-xr-x  2 peter peter    4096 Sep 10 05:43 CMake
-rw-r--r--  1 peter peter   92961 Sep 10 05:43 CMakeLists.txt
-rw-r--r--  1 peter peter    1088 Sep 10 05:43 COPYING
-rw-r--r--  1 peter peter    1712 Sep 10 05:43 Dockerfile
-rw-r--r--  1 peter peter    6930 Sep 10 05:43 Makefile.am
-rw-r--r--  1 peter peter   39602 Sep 10 05:43 Makefile.in
-rw-r--r--  1 peter peter    1664 Sep 10 05:43 README
-rw-r--r--  1 peter peter   28109 Sep 10 05:43 RELEASE-NOTES
-rw-r--r--  1 peter peter   44196 Sep 10 05:43 acinclude.m4
-rw-r--r--  1 peter peter   45838 Sep 10 05:43 aclocal.m4
-rwxr-xr-x  1 peter peter    7400 Sep 10 05:43 compile
-rwxr-xr-x  1 peter peter   49482 Sep 10 05:43 config.guess
-rwxr-xr-x  1 peter peter   35406 Sep 10 05:43 config.sub
-rwxr-xr-x  1 peter peter 1349020 Sep 10 05:43 configure
-rw-r--r--  1 peter peter  166752 Sep 10 05:43 configure.ac
-rw-r--r--  1 peter peter    4778 Sep 10 05:43 curl-config.in
-rwxr-xr-x  1 peter peter   23568 Sep 10 05:43 depcomp
drwxr-xr-x  7 peter peter    4096 Sep 10 05:43 docs
drwxr-xr-x  3 peter peter    4096 Sep 10 05:43 include
-rwxr-xr-x  1 peter peter   15358 Sep 10 05:43 install-sh
drwxr-xr-x  7 peter peter   12288 Sep 10 05:43 lib
-rw-r--r--  1 peter peter    1586 Sep 10 05:43 libcurl.pc.in
-rwxr-xr-x  1 peter peter  333057 Sep 10 05:43 ltmain.sh
drwxr-xr-x  2 peter peter    4096 Sep 10 05:43 m4
-rwxr-xr-x  1 peter peter    6878 Sep 10 05:43 missing
drwxr-xr-x  4 peter peter    4096 Sep 10 05:43 packages
drwxr-xr-x  5 peter peter    4096 Sep 10 05:43 plan9
drwxr-xr-x  2 peter peter    4096 Sep 10 05:43 projects
drwxr-xr-x  2 peter peter    4096 Sep 10 05:43 scripts
drwxr-xr-x  2 peter peter    4096 Sep 10 05:43 src
drwxr-xr-x 10 peter peter    4096 Sep 10 05:43 tests
drwxr-xr-x  2 peter peter    4096 Sep 10 05:43 winbuild
↓ 38 lines
ASSISTANT
Show reasoning

The user wants me to compile curl and install it to /home/peter/result. I need to:

1. Configure the build with minimal dependencies to avoid issues with missing third-party dependencies
2. Compile curl
3. Install it to /home/peter/result
4. Create a symlink from /home/peter/result/curl to the actual binary

I can see that the curl source is already extracted. Let me first check what configure options are available to build with minimal dependencies, then configure, build, and install.

For making it build even if some third party dependencies are not available, I should use configure flags that disable optional features that might require external libraries.

compile-bench> cd /home/peter/curl-8.16.0 && ./configure --help | grep -E "(disable|without)" | head -20
      --cache-file=FILE   cache test results in FILE [disabled]
  --disable-option-checking  ignore unrecognized --enable/--with options
  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
  --disable-silent-rules  verbose build output (undo: "make V=0")
  --disable-debug         Disable debug build options
  --disable-optimize      Disable compiler optimizations
  --disable-warnings      Disable strict compiler warnings
  --disable-werror        Disable compiler warnings as errors
  --disable-curldebug     Disable curl debug memory tracking
  --disable-symbol-hiding Disable hiding of library internal symbols
  --disable-ares          Disable c-ares for DNS lookups
  --disable-rt            disable dependency on -lrt
  --disable-httpsrr       Disable HTTPSRR support
  --disable-ech           Disable ECH support
  --disable-ssls-export   Disable SSL session export support
  --disable-dependency-tracking
  --disable-largefile     omit support for large files
  --disable-libtool-lock  avoid locking (might break parallel builds)
  --disable-unity         Disable unity (default)
  --disable-http          Disable HTTP support
↓ 21 lines
ASSISTANT
Show reasoning

The user wants me to compile curl and install it to /home/peter/result, making it build even if some third party dependencies are not available. I can see the curl source is already extracted.

To make it build even if some third party dependencies are not available, I should configure it with options that disable optional features that might require external dependencies. Let me look at more configuration options to see what I can disable.

I should:
1. Configure curl with minimal dependencies
2. Make and install it to /home/peter/result
3. Create a symlink from /home/peter/result/curl to the actual binary

Let me check more configure options and then proceed with the build.

compile-bench> cd /home/peter/curl-8.16.0 && ./configure --help | grep -E "(disable|without)" | grep -v "Disable HTTP\|Disable FTP\|Disable TFTP\|Disable POP3\|Disable IMAP\|Disable SMTP\|Disable Gopher\|Disable FILE\|Disable LDAP\|Disable DICT\|Disable TELNET\|Disable RTSP" | head -30
      --cache-file=FILE   cache test results in FILE [disabled]
  --disable-option-checking  ignore unrecognized --enable/--with options
  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
  --disable-silent-rules  verbose build output (undo: "make V=0")
  --disable-debug         Disable debug build options
  --disable-optimize      Disable compiler optimizations
  --disable-warnings      Disable strict compiler warnings
  --disable-werror        Disable compiler warnings as errors
  --disable-curldebug     Disable curl debug memory tracking
  --disable-symbol-hiding Disable hiding of library internal symbols
  --disable-ares          Disable c-ares for DNS lookups
  --disable-rt            disable dependency on -lrt
  --disable-ech           Disable ECH support
  --disable-ssls-export   Disable SSL session export support
  --disable-dependency-tracking
  --disable-largefile     omit support for large files
  --disable-libtool-lock  avoid locking (might break parallel builds)
  --disable-unity         Disable unity (default)
  --disable-ipfs          Disable IPFS support
  --disable-proxy         Disable proxy support
  --disable-smb           Disable SMB/CIFS support
  --disable-mqtt          Disable MQTT support
  --disable-manual        Disable built-in manual
  --disable-docs          Disable documentation
  --disable-libcurl-option
  --disable-ipv6          Disable IPv6 support
  --disable-openssl-auto-load-config
  --disable-ca-search     Disable unsafe CA bundle search in PATH on Windows
  --disable-ca-search-safe
  --disable-versioned-symbols
↓ 31 lines
ASSISTANT
Show reasoning

The user wants me to compile curl and install it to /home/peter/result. They want me to make it build even if some third party dependencies are not available. Let me configure curl with options that disable dependencies that might not be available, then compile and install it.

I should:
1. Configure curl with --prefix=/home/peter/result and disable various optional dependencies
2. Make and install
3. Create a symlink from /home/peter/result/curl to the actual binary

Let me start by configuring with minimal dependencies.

compile-bench> cd /home/peter/curl-8.16.0 && ./configure --prefix=/home/peter/result --disable-shared --disable-ares --without-ssl --without-gnutls --without-mbedtls --without-wolfssl --without-schannel --without-secure-transport --without-amissl --without-libidn2 --without-librtmp --without-libssh2 --without-libssh --without-libpsl --without-nghttp2 --without-ngtcp2 --without-nghttp3 --without-quiche --without-msh3 --without-zlib --without-brotli --without-zstd --without-ldap --without-winssl --disable-ldap --disable-ldaps --disable-sspi --disable-crypto-auth --disable-ntlm-wb --disable-tls-srp --disable-unix-sockets --disable-cookies
configure: WARNING: unrecognized options: --without-secure-transport, --without-msh3, --without-winssl, --disable-crypto-auth, --disable-ntlm-wb
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for ar... /usr/bin/ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking how to run the C preprocessor... gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for grep that handles long lines and -e... (cached) /us
[command output truncated]
status: creating tests/server/Makefile
config.status: creating tests/libtest/Makefile
config.status: creating tests/unit/Makefile
config.status: creating tests/tunit/Makefile
config.status: creating tests/http/config.ini
config.status: creating tests/http/Makefile
config.status: creating packages/Makefile
config.status: creating packages/vms/Makefile
config.status: creating libcurl.pc
config.status: creating curl-config
config.status: creating lib/curl_config.h
config.status: executing depfiles commands
config.status: executing libtool commands
configure: WARNING: unrecognized options: --without-secure-transport, --without-msh3, --without-winssl, --disable-crypto-auth, --disable-ntlm-wb
configure: Configured to build curl/libcurl:

  Host setup:       x86_64-pc-linux-gnu
  Install prefix:   /home/peter/result
  Compiler:         gcc
   CFLAGS:          -Werror-implicit-function-declaration -O2 -Wno-system-headers
   CFLAGS extras:   
   CPPFLAGS:        -D_GNU_SOURCE
   LDFLAGS:         
     curl-config:   
   LIBS:            

  curl version:     8.16.0
  SSL:              no      (--with-{openssl,gnutls,mbedtls,wolfssl,schannel,amissl,rustls} )
  SSH:              no      (--with-{libssh,libssh2})
  zlib:             no      (--with-zlib)
  brotli:           no      (--with-brotli)
  zstd:             no      (--with-zstd)
  GSS-API:          no      (--with-gssapi)
  GSASL:            no      (libgsasl not found)
  TLS-SRP:          no      (--enable-tls-srp)
  resolver:         POSIX threaded
  IPv6:             enabled
  Unix sockets:     no      (--enable-unix-sockets)
  IDN:              no      (--with-{libidn2,winidn})
  Build docs:       enabled (--disable-docs)
  Build libcurl:    Shared=no, Static=yes
  Built-in manual:  enabled
  --libcurl option: enabled (--disable-libcurl-option)
  Verbose errors:   enabled (--disable-verbose)
  Code coverage:    disabled
  SSPI:             no      (--enable-sspi)
  ca cert bundle:   no
  ca cert path:     
  ca cert embed:    no
  ca fallback:      
  LDAP:             no      (--enable-ldap / --with-ldap-lib / --with-lber-lib)
  LDAPS:            no      (--enable-ldaps)
  IPFS/IPNS:        enabled
  RTSP:             enabled
  RTMP:             no      (--with-librtmp)
  PSL:              no      (--with-libpsl)
  Alt-svc:          enabled (--disable-alt-svc)
  Headers API:      enabled (--disable-headers-api)
  HSTS:             no      (--enable-hsts)
  HTTP1:            enabled (internal)
  HTTP2:            no      (--with-nghttp2)
  HTTP3:            no      (--with-ngtcp2 --with-nghttp3, --with-quiche, --with-openssl-quic)
  ECH:              no      (--enable-ech)
  HTTPS RR:         no      (--enable-httpsrr)
  SSLS-EXPORT:      no      (--enable-ssls-export)
  Protocols:        dict file ftp gopher http imap ipfs ipns mqtt pop3 rtsp smtp telnet tftp ws
  Features:         alt-svc AsynchDNS IPv6 Largefile threadsafe
↓ 134 lines
ASSISTANT
Show reasoning

The configure process completed successfully. Now I need to build curl using make and then install it to the specified directory. After that, I'll create a symlink from /home/peter/result/curl to the actual binary.

Let me proceed with the build and installation.

compile-bench> cd /home/peter/curl-8.16.0 && make -j$(nproc)
Making all in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make  all-am
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
  CC       libcurl_la-altsvc.lo
  CC       libcurl_la-amigaos.lo
  CC       libcurl_la-asyn-ares.lo
  CC       libcurl_la-asyn-base.lo
  CC       libcurl_la-asyn-thrdd.lo
  CC       libcurl_la-bufq.lo
  CC       libcurl_la-bufref.lo
  CC       libcurl_la-cf-h1-proxy.lo
  CC       libcurl_la-cf-h2-proxy.lo
  CC       libcurl_la-cf-haproxy.lo
  CC       libcurl_la-cf-https-connect.lo
  CC       libcurl_la-cf-ip-happy.lo
  CC       libcurl_la-cf-socket.lo
  CC       libcurl_la-cfilters.lo
  CC       libcurl_la-conncache.lo
  CC       libcurl_la-connect.lo
  CC       libcurl_la-content_encoding.lo
  CC       libcurl_la-cookie.lo
  CC       libcurl_la-cshutdn.lo
  CC       libcurl_la-curl_addrinfo.lo
  CC       libcurl_la-curl_des.lo
  CC       libcurl_la-curl_endian.lo
  CC       libcurl_la-curl_fnmatch.lo
  CC       libcurl_la-curl_get_line.lo
  CC       libcurl_la-curl_gethostname.lo
  CC       libcurl_la-curl_gssapi.lo
  CC       libcurl_la-curl_memrchr.lo
  CC       libcurl_la-curl_ntlm_core.lo
  CC       libcurl_la-curl_range.lo
  CC       libcurl_la-curl_rtmp.lo
  CC       libcurl_la-curl_sasl.lo
  CC       libcurl_la-curl_sha512_256.lo
  CC       libcurl_la-curl_sspi.lo
  CC       libcurl_la-curl_threads.lo
  CC       libcurl_la-curl_trc.lo
  CC       libcurl_la-cw-out.lo
  CC       libcurl_la-cw-pause.lo
  CC       libcurl_la-dict.lo
  CC       libcurl_la-doh.lo
  CC       libcurl_la-dynhds.lo
  CC       libcurl_la-easy.lo
  CC       libcurl_la-easygetopt.lo
  CC       libcurl_la-easyoptions.lo
  CC       libcurl_la-escape.lo
  CC       libcurl_la-fake_addrinfo.lo
  CC       libcurl_la-file.lo
  CC       libcurl_la-fileinfo.lo
  CC       libcurl_la-fopen.lo
  CC       libcurl_la-formdata.lo
  CC       libcurl_la-ftp.lo
  CC       libcurl_la-ftplistparser.lo
  CC       libcurl_la-getenv.lo
  CC       libcurl_la-getinfo.lo
  CC       libcurl_la-gopher.lo
  CC       libcurl_la-hash.lo
  CC       libcurl_la-headers.lo
  CC       libcurl_la-hmac.lo
  CC       libcurl_la-hostip.lo
  CC       libcurl_la-hostip4.lo
  CC       libcurl_la-hostip6.lo
  CC       libcurl_la-hsts.lo
  CC       libcurl_la-http.lo
  CC       libcurl_la-http1.lo
  CC       libcurl_la-http2.lo
  CC       libcurl_la-http_aws_sigv4.lo
  CC       libcurl_la-http_chunks.lo
[command output truncated]
  CC       curl-tool_stderr.o
  CC       curl-tool_strdup.o
  CC       curl-tool_urlglob.o
  CC       curl-tool_util.o
  CC       curl-tool_vms.o
  CC       curl-tool_writeout.o
  CC       curl-tool_writeout_json.o
  CC       curl-tool_xattr.o
  CC       curl-var.o
  HUGE     tool_hugehelp.c
echo '/* !checksrc! disable COPYRIGHT all */' > tool_ca_embed.c
echo 'extern const void *curl_ca_embed; const void *curl_ca_embed;' >> tool_ca_embed.c
  CC       curlinfo.o
  CC       libcurltool_la-config2setopts.lo
  CC       libcurltool_la-slist_wc.lo
  CC       libcurltool_la-terminal.lo
  CC       libcurltool_la-tool_bname.lo
  CC       libcurltool_la-tool_cb_dbg.lo
  CC       libcurltool_la-tool_cb_hdr.lo
  CC       libcurltool_la-tool_cb_prg.lo
  CC       libcurltool_la-tool_cb_rea.lo
  CC       libcurltool_la-tool_cb_see.lo
  CC       libcurltool_la-tool_cb_soc.lo
  CC       libcurltool_la-tool_cb_wrt.lo
  CC       libcurltool_la-tool_cfgable.lo
  CC       libcurltool_la-tool_dirhie.lo
  CC       libcurltool_la-tool_doswin.lo
  CC       libcurltool_la-tool_easysrc.lo
  CC       libcurltool_la-tool_filetime.lo
  CC       libcurltool_la-tool_findfile.lo
  CC       libcurltool_la-tool_formparse.lo
  CC       libcurltool_la-tool_getparam.lo
  CC       libcurltool_la-tool_getpass.lo
  CC       libcurltool_la-tool_help.lo
  CC       libcurltool_la-tool_helpers.lo
  CC       libcurltool_la-tool_ipfs.lo
  CC       libcurltool_la-tool_libinfo.lo
  CC       libcurltool_la-tool_listhelp.lo
  CC       libcurltool_la-tool_main.lo
  CC       libcurltool_la-tool_msgs.lo
  CC       libcurltool_la-tool_operate.lo
  CC       libcurltool_la-tool_operhlp.lo
  CC       libcurltool_la-tool_paramhlp.lo
  CC       libcurltool_la-tool_parsecfg.lo
  CC       libcurltool_la-tool_progress.lo
  CC       libcurltool_la-tool_setopt.lo
  CC       libcurltool_la-tool_ssls.lo
  CC       libcurltool_la-tool_stderr.lo
  CC       libcurltool_la-tool_strdup.lo
  CC       libcurltool_la-tool_urlglob.lo
  CC       libcurltool_la-tool_util.lo
  CC       libcurltool_la-tool_vms.lo
  CC       libcurltool_la-tool_writeout.lo
  CC       libcurltool_la-tool_writeout_json.lo
  CC       libcurltool_la-tool_xattr.lo
  CC       libcurltool_la-var.lo
  CC       curl-tool_hugehelp.o
  CC       curl-tool_ca_embed.o
  CCLD     curlinfo
  CCLD     curl
  CCLD     libcurltool.la
make[1]: Leaving directory '/home/peter/curl-8.16.0/src'
Making all in scripts
make[1]: Entering directory '/home/peter/curl-8.16.0/scripts'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/home/peter/curl-8.16.0/scripts'
make[1]: Entering directory '/home/peter/curl-8.16.0'
make[1]: Nothing to be done for 'all-am'.
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 141 lines
ASSISTANT
Show reasoning

The build completed successfully. Now I need to install curl to the specified directory /home/peter/result and create a symlink from /home/peter/result/curl to the actual binary.

compile-bench> cd /home/peter/curl-8.16.0 && make install
Making install in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
 /usr/bin/mkdir -p '/home/peter/result/lib'
 /bin/bash ../libtool   --mode=install /usr/bin/install -c   libcurl.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libcurl.lai /home/peter/result/lib/libcurl.la
libtool: install: /usr/bin/install -c .libs/libcurl.a /home/peter/result/lib/libcurl.a
libtool: install: chmod 644 /home/peter/result/lib/libcurl.a
libtool: install: ranlib /home/peter/result/lib/libcurl.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /home/peter/result/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/peter/curl-8.16.0/lib'
make[1]: Leaving directory '/home/peter/curl-8.16.0/lib'
Making install in docs
make[1]: Entering directory '/home/peter/curl-8.16.0/docs'
Making install in .
make[2]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /usr/bin/install -c -m 644 curl-config.1 wcurl.1 '/home/peter/result/share/man/man1'
make[3]: Leaving directory '/home/peter/curl-8.16.0/docs'
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs'
Making install in cmdline-opts
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /usr/bin/install -c -m 644 curl.1 '/home/peter/result/share/man/man1'
make[3]: Leaving directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
Making install in libcurl
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
Making install in opts
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[4]: En
[command output truncated]
ng directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/aclocal'
 /usr/bin/install -c -m 644 libcurl.m4 '/home/peter/result/share/aclocal'
 /usr/bin/mkdir -p '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_easy_cleanup.3 curl_easy_duphandle.3 curl_easy_escape.3 curl_easy_getinfo.3 curl_easy_header.3 curl_easy_init.3 curl_easy_nextheader.3 curl_easy_option_by_id.3 curl_easy_option_by_name.3 curl_easy_option_next.3 curl_easy_pause.3 curl_easy_perform.3 curl_easy_recv.3 curl_easy_reset.3 curl_easy_send.3 curl_easy_setopt.3 curl_easy_ssls_export.3 curl_easy_ssls_import.3 curl_easy_strerror.3 curl_easy_unescape.3 curl_easy_upkeep.3 curl_escape.3 curl_formadd.3 curl_formfree.3 curl_formget.3 curl_free.3 curl_getdate.3 curl_getenv.3 curl_global_cleanup.3 curl_global_init.3 curl_global_init_mem.3 curl_global_sslset.3 curl_global_trace.3 curl_mime_addpart.3 curl_mime_data.3 curl_mime_data_cb.3 curl_mime_encoder.3 curl_mime_filedata.3 curl_mime_filename.3 curl_mime_free.3 '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_mime_headers.3 curl_mime_init.3 curl_mime_name.3 curl_mime_subparts.3 curl_mime_type.3 curl_mprintf.3 curl_multi_add_handle.3 curl_multi_assign.3 curl_multi_cleanup.3 curl_multi_fdset.3 curl_multi_get_handles.3 curl_multi_get_offt.3 curl_multi_info_read.3 curl_multi_init.3 curl_multi_perform.3 curl_multi_poll.3 curl_multi_remove_handle.3 curl_multi_setopt.3 curl_multi_socket.3 curl_multi_socket_action.3 curl_multi_socket_all.3 curl_multi_strerror.3 curl_multi_timeout.3 curl_multi_wait.3 curl_multi_waitfds.3 curl_multi_wakeup.3 curl_pushheader_byname.3 curl_pushheader_bynum.3 curl_share_cleanup.3 curl_share_init.3 curl_share_setopt.3 curl_share_strerror.3 curl_slist_append.3 curl_slist_free_all.3 curl_strequal.3 curl_strnequal.3 curl_unescape.3 curl_url.3 curl_url_cleanup.3 curl_url_dup.3 '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_url_get.3 curl_url_set.3 curl_url_strerror.3 curl_version.3 curl_version_info.3 curl_ws_meta.3 curl_ws_recv.3 curl_ws_send.3 curl_ws_start_frame.3 libcurl-easy.3 libcurl-env-dbg.3 libcurl-env.3 libcurl-errors.3 libcurl-multi.3 libcurl-security.3 libcurl-share.3 libcurl-symbols.3 libcurl-thread.3 libcurl-tutorial.3 libcurl-url.3 libcurl-ws.3 libcurl.3 '/home/peter/result/share/man/man3'
make[6]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[4]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[3]: Leaving directory '/home/peter/curl-8.16.0'
make[2]: Leaving directory '/home/peter/curl-8.16.0'
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 73 lines
ASSISTANT
Show reasoning

The build and install process has completed successfully. Now I need to:

1. Check if the curl binary was installed correctly in /home/peter/result
2. Create a symlink from /home/peter/result/curl to the actual binary

Let me first check what's in the result directory and locate the curl binary.

compile-bench> ls -la /home/peter/result
total 24
drwxr-xr-x 6 peter peter 4096 Sep 16 21:47 .
drwxr-x--- 1 peter peter 4096 Sep 16 21:47 ..
drwxr-xr-x 2 peter peter 4096 Sep 16 21:47 bin
drwxr-xr-x 3 peter peter 4096 Sep 16 21:47 include
drwxr-xr-x 3 peter peter 4096 Sep 16 21:47 lib
drwxr-xr-x 4 peter peter 4096 Sep 16 21:47 share
↓ 8 lines
ASSISTANT
Show reasoning

The user asked me to:
1. Compile curl and install it to /home/peter/result - ✓ Done
2. Create a symlink from /home/peter/result/curl to the actual binary

I need to check where the actual binary is located and then create the symlink.

compile-bench> ls -la /home/peter/result/bin
total 1368
drwxr-xr-x 2 peter peter    4096 Sep 16 21:47 .
drwxr-xr-x 6 peter peter    4096 Sep 16 21:47 ..
-rwxr-xr-x 1 peter peter 1371000 Sep 16 21:47 curl
-rwxr-xr-x 1 peter peter    5355 Sep 16 21:47 curl-config
-rwxr-xr-x 1 peter peter   10622 Sep 16 21:47 wcurl
↓ 7 lines
ASSISTANT
Show reasoning

Great! I can see that curl has been successfully compiled and installed to /home/peter/result/bin/curl. Now I need to create a symlink from /home/peter/result/curl to the actual binary which is located at /home/peter/result/bin/curl.

compile-bench> cd /home/peter/result && ln -s bin/curl curl
[empty output]
ASSISTANT
Show reasoning

Let me verify that the symlink was created correctly and test that the curl binary works.

compile-bench> ls -la /home/peter/result
total 24
drwxr-xr-x 6 peter peter 4096 Sep 16 21:47 .
drwxr-x--- 1 peter peter 4096 Sep 16 21:47 ..
drwxr-xr-x 2 peter peter 4096 Sep 16 21:47 bin
lrwxrwxrwx 1 peter peter    8 Sep 16 21:47 curl -> bin/curl
drwxr-xr-x 3 peter peter 4096 Sep 16 21:47 include
drwxr-xr-x 3 peter peter 4096 Sep 16 21:47 lib
drwxr-xr-x 4 peter peter 4096 Sep 16 21:47 share
↓ 9 lines
ASSISTANT
Show reasoning

Let me verify that the curl binary was compiled correctly and is functional. I'll test if it works properly.

compile-bench> cd /home/peter/result && ./curl --version
curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0
Release-Date: 2025-09-10
Protocols: dict file ftp gopher http imap ipfs ipns mqtt pop3 rtsp smtp telnet tftp ws
Features: alt-svc AsynchDNS IPv6 Largefile threadsafe
↓ 5 lines
ASSISTANT
Show reasoning

The user asked me to:
1. Compile curl from the source code at /home/peter/curl.tar.gz
2. Install it to /home/peter/result
3. Create a symlink from /home/peter/result/curl to the actual binary
4. Make it build even if some third party dependencies are not available

Let me verify what I've accomplished:

1. ✅ I extracted the curl source code from curl.tar.gz
2. ✅ I configured curl with many disabled features and without third-party dependencies to ensure it builds even without them
3. ✅ I compiled curl successfully using make
4. ✅ I installed curl to /home/peter/result
5. ✅ I created a symlink from /home/peter/result/curl to /home/peter/result/bin/curl
6. ✅ I verified the installation works by running ./curl --version

The build was successful and the curl binary is working. The configure command I used disabled many optional features and dependencies like SSL libraries, compression libraries, etc. to ensure it would build even without third-party dependencies available. The final curl binary supports basic protocols and features as shown in the version output.

Let me do a final verification to make sure everything is properly set up.

compile-bench> cd /home/peter/result && ./curl --help | head -5
Usage: curl [options...] <url>
 -d, --data <data>           HTTP POST data
 -f, --fail                  Fail fast with no output on HTTP errors
 -h, --help <subject>        Get help for commands
 -o, --output <file>         Write to file instead of stdout
↓ 6 lines
ASSISTANT
Show reasoning

Let me verify the task has been completed successfully:

1. ✅ Extracted curl v8.16.0 source code from /home/peter/curl.tar.gz
2. ✅ Configured curl with minimal dependencies to make it build even if third party dependencies are not available (disabled SSL, compression, authentication libraries, etc.)
3. ✅ Compiled curl successfully
4. ✅ Installed curl to /home/peter/result
5. ✅ Created a symlink from /home/peter/result/curl to the actual binary (/home/peter/result/bin/curl)
6. ✅ Verified the build works by running curl --version and --help

The task has been completed successfully. The curl binary is working and shows version 8.16.0 with basic protocols supported (dict, file, ftp, gopher, http, imap, ipfs, ipns, mqtt, pop3, rtsp, smtp, telnet, tftp, ws) and features (alt-svc, AsynchDNS, IPv6, Largefile, threadsafe). The build was configured to avoid dependencies on external libraries that might not be available.

Perfect! I have successfully completed the task. Let me summarize what was accomplished:

Summary

✅ Task Completed Successfully

1. Extracted curl v8.16.0 source code from /home/peter/curl.tar.gz

2. Configured curl with minimal dependencies to ensure it builds even when third-party dependencies are unavailable:
- Disabled SSL/TLS libraries (OpenSSL, GnuTLS, mbedTLS, etc.)
- Disabled compression libraries (zlib, brotli, zstd)
- Disabled authentication libraries (libssh, libssh2)
- Disabled optional features that require external dependencies
- Used static linking to avoid runtime dependency issues

3. Compiled curl successfully using make -j$(nproc)

4. Installed curl to /home/peter/result using make install

5. Created symlink from /home/peter/result/curl to the actual binary at /home/peter/result/bin/curl

6. Verified the installation:
- curl version 8.16.0 is working correctly
- Supports essential protocols: dict, file, ftp, gopher, http, imap, ipfs, ipns, mqtt, pop3, rtsp, smtp, telnet, tftp, ws
- Has core features: alt-svc, AsynchDNS, IPv6, Largefile, threadsafe

The curl binary is now ready to use at /home/peter/result/curl and will work reliably without external dependencies.

Task finished successfully, all checks passed!
Checks passed:
curl binary exists
curl version matches expected
curl downloaded the expected local file content