<- Ranking
Summary
Task
jq-static-musl
Model
glm-4.5 logo
glm-4.5
Status
Success
Performance
Cost$0.111
Total elapsed time1m33s
LLM inference time1m13s
Command execution time19s
Commands executed24
All details >
Attempt ID b0hxijrv7ghqu Attempt group run-16-09-22-05
Revision fb5c74bd2fee AWS Instance m8i.2xlarge
Start time 2025-09-16T22:05:22.186Z End time 2025-09-16T22:06:55.358Z
Task jq-static-musl Environment ubuntu-22.04-amd64
Model glm-4.5 logo glm-4.5 OpenRouter slug z-ai/glm-4.5
Temperature 1 Explicit prompt caching false
User msg after tool call false Max tool calls 100
Total timeout seconds 1200 Single command timeout 600
Cost $0.111 Duration 1m33s
LLM inference time 1m13s Command execution time 19s
Final context tokens 14,399 Total output tokens 2,109
Output reasoning tokens 1,188 Messages 51
Assistant messages 25 User messages 1
System messages 1 Commands executed 24
Download full attempt result JSON
Task
Task: jq-static-musl

jq 1.8.1 is a command-line JSON utility for viewing and transforming JSON.
Project link: github.com/jqlang/jq

Task:
Compile and install statically-linked jq to a specific location. The binary must use musl C library (not the standard glibc).

Difficulties:
musl toolchain setup, avoiding glibc-only assumptions.

Environment:
Ubuntu 22.04 on amd64, with internet access.

View task page
Execution log
SYSTEM

You are a package-building specialist operating a Ubuntu 22.04 bash shell via one tool: run_terminal_cmd.
The current working directory of every run_terminal_cmd is /home/peter.
Execution rules:
- Always pass non-interactive flags for any command that could prompt (e.g., -y, --yes, DEBIAN_FRONTEND=noninteractive).
- Don't include any newlines in the command.
- You can use sudo.
If you encounter any errors or issues while doing the user's request, you must fix them and continue the task.
At the end verify you did the user request correctly.

USER

You are given jq v1.8.1 source code at /home/peter/jq.tar.gz. Please compile the jq package using musl as the C standard library and install it to /home/peter/result. Create a symlink from /home/peter/result/jq to the compiled jq binary. The binary must be statically linked and must use musl (not glibc).

ASSISTANT
Show reasoning

I need to compile jq v1.8.1 from source using musl as the C standard library, install it to /home/peter/result, create a symlink, and ensure it's statically linked.

Let me break this down:
1. First, I need to extract the jq source code from /home/peter/jq.tar.gz
2. I need to install musl and build tools
3. Configure and compile jq using musl instead of glibc
4. Install it to /home/peter/result
5. Create a symlink from /home/peter/result/jq to the compiled binary
6. Verify it's statically linked with musl

Let me start:

I'll compile jq v1.8.1 from source using musl as the C standard library and install it to the specified location. Let me start by extracting the source code and setting up the environment.

compile-bench> tar -xzf jq.tar.gz
[empty output]
ASSISTANT
Show reasoning

The tar extraction ran successfully. Now I need to check what directory was created and navigate into it to see the source code structure.

compile-bench> ls -la
total 2008
drwxr-x--- 1 peter peter    4096 Sep 16 22:05 .
drwxr-xr-x 1 root  root     4096 Sep 15 11:21 ..
-rw-r--r-- 1 peter peter     220 Jan  6  2022 .bash_logout
-rw-r--r-- 1 peter peter    3771 Jan  6  2022 .bashrc
-rw-r--r-- 1 peter peter     807 Jan  6  2022 .profile
drwxr-xr-x 9 peter peter    4096 Jul  1 11:40 jq-1.8.1
-rw-r--r-- 1 peter peter 2026798 Sep 16 22:05 jq.tar.gz
↓ 9 lines
ASSISTANT
Show reasoning

Good, the jq source code has been extracted to jq-1.8.1 directory. Now I need to:

1. Install musl and musl-tools if not already installed
2. Install musl-gcc compiler wrapper
3. Configure and compile jq with musl using CC=musl-gcc
4. Install it to /home/peter/result
5. Create the symlink

Let me start by checking if musl is installed and install it if needed.

compile-bench> dpkg -l | grep musl
[empty output]
ASSISTANT
Show reasoning

I need to check if musl and musl-tools are available. The output shows nothing installed, so I need to install the musl development tools to compile with musl.

compile-bench> apt update && apt install -y musl musl-tools
Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 3%

Reading package lists... 3%

Reading package lists... 4%

Reading package lists... 4%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 52%

Reading package lists... 52%

Reading package lists... 67%

Reading package lists... 67%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 81%

Reading package lists... 81%

Reading package lists... 96%

Reading package lists... 96%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... Done

E: Could not open lock file /var/lib/apt/lists/lock - open (13: Permission denied)
E: Unable to lock directory /var/lib/apt/lists/
↓ 4 lines
ASSISTANT
Show reasoning

I need to use sudo to update and install packages. Let me try again with sudo.

compile-bench> sudo apt update && sudo apt install -y musl musl-tools
0% [Working]
            
Hit:1 http://archive.ubuntu.com/ubuntu jammy InRelease

0% [Waiting for headers] [Connecting to security.ubuntu.com (185.125.190.36)]
                                                                             
Get:2 http://archive.ubuntu.com/ubuntu jammy-updates InRelease [128 kB]

0% [2 InRelease 12.7 kB/128 kB 10%] [Connecting to security.ubuntu.com (185.125
                                                                               
0% [2 InRelease 41.7 kB/128 kB 33%] [Waiting for headers]
                                                         
0% [Waiting for headers]
                        
Get:3 http://archive.ubuntu.com/ubuntu jammy-backports InRelease [127 kB]

0% [3 InRelease 6932 B/127 kB 5%] [Waiting for headers]
                                                       
0% [Waiting for headers]
                        
Get:4 http://security.ubuntu.com/ubuntu jammy-security InRelease [129 kB]

0% [4 InRelease 6932 B/129 kB 5%]
0% [4 InRelease 14.2 kB/129 kB 11%]
                                   
Get:5 http://archive.ubuntu.com/ubuntu jammy-updates/universe amd64 Packages [1581 kB]

0% [5 Packages 6999 B/1581 kB 0%] [4 InRelease 14.2 kB/129 kB 11%]
0% [5 Packages 223 kB/1581 kB 14%] [4 InRelease 14.2 kB/129 kB 11%]
                                                                   
0% [4 InRelease 22.9 kB/129 kB 18%]
0% [5 Packages store 0 B] [Waiting for headers] [4 InRelease 25.8 kB/129 kB 20%
                                                                               
Get:6 http://archive.ubuntu.com/ubuntu jammy-updates/restricted amd64 Packages [5665 kB]

0% [5 Packages store 0 B] [6 Packages 15.7 kB/5665 kB 0%] [4 InRelease 34.4 kB/
                                                                               
0% [6 Packages 2183 kB/5665 kB 39%] [4 InRelease 43.1 kB/129 kB 33%]
                                                                    
Get:7 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 Packages [3638 kB]

                                                                    
0% [7 Packages 99.6 kB/3638 kB 3%] [4 InRelease 46.0 kB/129 kB 36%]
0% [6 Packages store 0 B] [7 Packages 165 kB/3638 kB 5%] [4 InRelease 46.0 kB/1
                                                                               
0% [6 Packages store 0 B] [4 InRelease 54.7 kB/129 kB 42%]
                                                          
0% [6 Packages store 0 B]
                         
0% [Working]
0% [7 Packages store 0 B]
59% [7 Packages store 0 B]
                          
Get:8 http://security.ubuntu.com/ubuntu jammy-security/restricted amd64 Packages [5441 kB]

59% [7 Packages store 0 B] [8 Packages 2655 B/5441 kB 0%]
                                                         
60% [8 Packages 30.2 kB/5441 kB 1%]
                                   
80% [Working]
80% [8 Packages store 0 B]
                          
Get:9 http://security.ubuntu.com/ubuntu jammy-security/universe amd64
[command output truncated]
%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 81%

Reading package lists... 81%

Reading package lists... 96%

Reading package lists... 96%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... Done


Building dependency tree... 0%

Building dependency tree... 0%

Building dependency tree... 50%

Building dependency tree... 50%

Building dependency tree... Done


Reading state information... 0% 

Reading state information... 1%

Reading state information... Done

The following additional packages will be installed:
  musl-dev
Recommended packages:
  linux-musl-dev
The following NEW packages will be installed:
  musl musl-dev musl-tools
0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded.
Need to get 1018 kB of archives.
After this operation, 4100 kB of additional disk space will be used.

0% [Working]
            
Get:1 http://archive.ubuntu.com/ubuntu jammy/universe amd64 musl amd64 1.2.2-4 [407 kB]

1% [1 musl 14.2 kB/407 kB 3%]
                             
39% [Waiting for headers]
                         
Get:2 http://archive.ubuntu.com/ubuntu jammy/universe amd64 musl-dev amd64 1.2.2-4 [605 kB]

40% [2 musl-dev 11.3 kB/605 kB 2%]
                                  
93% [Waiting for headers]
                         
Get:3 http://archive.ubuntu.com/ubuntu jammy/universe amd64 musl-tools amd64 1.2.2-4 [5520 B]

93% [3 musl-tools 729 B/5520 B 13%]
                                   
100% [Working]
              
Fetched 1018 kB in 1s (1128 kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package musl:amd64.
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 10711 files and directories currently installed.)
Preparing to unpack .../musl_1.2.2-4_amd64.deb ...
Unpacking musl:amd64 (1.2.2-4) ...
Selecting previously unselected package musl-dev:amd64.
Preparing to unpack .../musl-dev_1.2.2-4_amd64.deb ...
Unpacking musl-dev:amd64 (1.2.2-4) ...
Selecting previously unselected package musl-tools.
Preparing to unpack .../musl-tools_1.2.2-4_amd64.deb ...
Unpacking musl-tools (1.2.2-4) ...
Setting up musl:amd64 (1.2.2-4) ...
Setting up musl-dev:amd64 (1.2.2-4) ...
Setting up musl-tools (1.2.2-4) ...
↓ 41 lines
ASSISTANT
Show reasoning

Good, now I have musl and musl-tools installed. Next, I need to install build dependencies for jq. Let me check what build tools are available and install them if needed.

compile-bench> sudo apt install -y build-essential flex bison libtool automake autotools-dev git
Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 3%

Reading package lists... 3%

Reading package lists... 4%

Reading package lists... 4%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 52%

Reading package lists... 52%

Reading package lists... 67%

Reading package lists... 67%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 81%

Reading package lists... 81%

Reading package lists... 96%

Reading package lists... 96%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... Done


Building dependency tree... 0%

Building dependency tree... 0%

Building dependency tree... 50%

Building dependency tree... 50%

Building dependency tree... Done


Reading state information... 0% 

Reading state information... 1%

Reading state information... Done

build-essential is already the newest version (12.9ubuntu3).
The following additional packages will be installed:
  autoconf git-man less libbsd0 libcbor0.8 libcurl3-gnutls libedit2
  liberror-perl libexpat1 libfido2-1 libfl-dev libfl2 libltdl-dev libltdl7
  libmd0 libsigsegv2 libx11-6 libx11-data libxau6 libxcb1 libxdmcp6 libxext6
  libxmuu1 m4 openssh-client xauth
Suggested packages:
  autoconf-archive gnu-standards autoconf-doc gettext bison-doc flex-doc
  gettext-base git-daemon-run | git-daemon-sysvinit git-doc git-email git-gui
  gitk gitweb git-cvs git-mediawiki git-svn libtool-doc gfortran
  | fortran95-compiler gcj-jdk m4-doc keychain libpam-ssh monkeysphere
  ssh-askpass
The following NEW packages will be installed:
  autoconf automake autotools-dev bison flex git git-man less libbsd0
  libcbor0.8 libcurl3-gnutls libedit2 liberror-perl libexpat1 libfido2-1
  libfl-dev libfl2 libltdl-dev libltdl7 libmd0 libsigsegv2 libtool libx11-6
  libx11-data libxau6 libxcb1 libxdmcp6 libxext6 libxmuu1 m4 openssh-client
  xauth
0 upgraded, 32 newly installed, 0 to remove and 0 not upgraded.
Need to get 9362 kB of archives.
After this operation, 40.5 MB of additional disk space will be used.

0% [Working]
            
Get:1 http://archive.ubuntu.com/ubuntu jammy/main amd64 libsigsegv2 amd64 2.13-1ubuntu3 [14.6 kB]

0% [1 libsigsegv2 14.2 kB/14.6 kB 97%]
                                      
1% [Working]
            
Get:2 http://archive.ubuntu.com/ubuntu jammy/main amd64 m4 amd64 1.4.18-5ubuntu2 [199 kB]

1% [2 m4 2604 B/199 kB 1%]
                          
Get:3 http://archive.ubuntu.com/ubuntu jammy/main amd64 flex amd64 2.6.4-8build2 [307 kB]

3% [3 flex 404 B/307 kB 0%]
                           
Get:4 http://archive.ub
[command output truncated]
d64 (2.4.7-1ubuntu0.6) ...
Setting up libxau6:amd64 (1:1.0.9-1build5) ...
Setting up libcbor0.8:amd64 (0.8.0-2ubuntu1) ...
Setting up less (590-1ubuntu0.22.04.3) ...
Setting up libcurl3-gnutls:amd64 (7.81.0-1ubuntu1.20) ...
Setting up liberror-perl (0.17029-1) ...
Setting up autotools-dev (20220109.1) ...
Setting up libx11-data (2:1.7.5-1ubuntu0.3) ...
Setting up libsigsegv2:amd64 (2.13-1ubuntu3) ...
Setting up libfl2:amd64 (2.6.4-8build2) ...
Setting up libltdl7:amd64 (2.4.6-15build2) ...
Setting up libmd0:amd64 (1.0.4-1build1) ...
Setting up git-man (1:2.34.1-1ubuntu1.15) ...
Setting up libfido2-1:amd64 (1.10.0-1) ...
Setting up libbsd0:amd64 (0.11.5-1) ...
Setting up libxdmcp6:amd64 (1:1.1.3-0ubuntu5) ...
Setting up libxcb1:amd64 (1.14-3ubuntu3) ...
Setting up libtool (2.4.6-15build2) ...
Setting up libedit2:amd64 (3.1-20210910-1build1) ...
Setting up m4 (1.4.18-5ubuntu2) ...
Setting up git (1:2.34.1-1ubuntu1.15) ...
Setting up autoconf (2.71-2) ...
Setting up bison (2:3.8.2+dfsg-1build1) ...
update-alternatives: using /usr/bin/bison.yacc to provide /usr/bin/yacc (yacc) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/yacc.1.gz because associated file /usr/share/man/man1/bison.yacc.1.gz (of link group yacc) doesn't exist
Setting up libx11-6:amd64 (2:1.7.5-1ubuntu0.3) ...
Setting up libxmuu1:amd64 (2:1.1.3-3) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/automake.1.gz because associated file /usr/share/man/man1/automake-1.16.1.gz (of link group automake) doesn't exist
update-alternatives: warning: skip creation of /usr/share/man/man1/aclocal.1.gz because associated file /usr/share/man/man1/aclocal-1.16.1.gz (of link group automake) doesn't exist
Setting up flex (2.6.4-8build2) ...
Setting up openssh-client (1:8.9p1-3ubuntu0.13) ...
update-alternatives: using /usr/bin/ssh to provide /usr/bin/rsh (rsh) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/rsh.1.gz because associated file /usr/share/man/man1/ssh.1.gz (of link group rsh) doesn't exist
update-alternatives: using /usr/bin/slogin to provide /usr/bin/rlogin (rlogin) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/rlogin.1.gz because associated file /usr/share/man/man1/slogin.1.gz (of link group rlogin) doesn't exist
update-alternatives: using /usr/bin/scp to provide /usr/bin/rcp (rcp) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/rcp.1.gz because associated file /usr/share/man/man1/scp.1.gz (of link group rcp) doesn't exist
Setting up libxext6:amd64 (2:1.3.4-1build1) ...
Setting up libfl-dev:amd64 (2.6.4-8build2) ...
Setting up libltdl-dev:amd64 (2.4.6-15build2) ...
Setting up xauth (1:1.1-1build2) ...
Processing triggers for libc-bin (2.35-0ubuntu3.10) ...
↓ 74 lines
ASSISTANT
Show reasoning

Now I have all the necessary tools. Let me navigate to the jq source directory and configure it to use musl. I need to use musl-gcc or musl-clang to compile with musl. Let me check what's available and then configure the build.

compile-bench> cd jq-1.8.1 && ls -la
total 1184
drwxr-xr-x 9 peter peter   4096 Jul  1 11:40 .
drwxr-x--- 1 peter peter   4096 Sep 16 22:05 ..
-rw-r--r-- 1 peter peter  10686 Jul  1 11:39 AUTHORS
-rw-r--r-- 1 peter peter   7887 Jul  1 11:39 COPYING
-rw-r--r-- 1 peter peter  33286 Jul  1 11:39 ChangeLog
-rw-r--r-- 1 peter peter   9090 Jul  1 11:39 Makefile.am
-rw-r--r-- 1 peter peter  75461 Jul  1 11:39 Makefile.in
-rw-r--r-- 1 peter peter  24670 Jul  1 11:39 NEWS.md
-rw-r--r-- 1 peter peter   2434 Jul  1 11:39 README.md
-rw-r--r-- 1 peter peter  46459 Jul  1 11:39 aclocal.m4
drwxr-xr-x 3 peter peter   4096 Jul  1 11:40 config
-rwxr-xr-x 1 peter peter 665647 Jul  1 11:39 configure
-rw-r--r-- 1 peter peter   9881 Jul  1 11:39 configure.ac
drwxr-xr-x 5 peter peter   4096 Jul  1 11:40 docs
-rw-r--r-- 1 peter peter 124253 Jul  1 11:39 jq.1
-rw-r--r-- 1 peter peter 124253 Jul  1 11:39 jq.1.prebuilt
-rw-r--r-- 1 peter peter   1431 Jul  1 11:39 jq.spec
-rw-r--r-- 1 peter peter    255 Jul  1 11:39 libjq.pc
-rw-r--r-- 1 peter peter    246 Jul  1 11:39 libjq.pc.in
drwxr-xr-x 2 peter peter   4096 Jul  1 11:40 m4
drwxr-xr-x 2 peter peter   4096 Jul  1 11:40 scripts
drwxr-xr-x 2 peter peter   4096 Jul  1 11:40 src
drwxr-xr-x 4 peter peter   4096 Jul  1 11:40 tests
drwxr-xr-x 4 peter peter   4096 Jul  1 11:40 vendor
↓ 26 lines
ASSISTANT
Show reasoning

Now I need to compile jq using musl. I need to set up the environment to use musl instead of glibc. I'll use the musl-gcc wrapper which should be available after installing musl-tools.

First, let me check if musl-gcc is available:

compile-bench> which musl-gcc
/usr/bin/musl-gcc
ASSISTANT
Show reasoning

Great! Now I need to configure and compile jq using musl-gcc. I need to:

1. Set up the environment to use musl-gcc as the compiler
2. Configure jq with the right parameters
3. Compile it
4. Install it to /home/peter/result
5. Create the symlink

Let me start by configuring jq. I need to set CC=musl-gcc and probably some other flags to ensure static linking.

compile-bench> cd jq-1.8.1 && CC=musl-gcc CFLAGS="-static" LDFLAGS="-static" ./configure --prefix=/home/peter/result --enable-static --disable-shared
checking for gcc... musl-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether musl-gcc accepts -g... yes
checking for musl-gcc option to enable C11 features... none needed
checking whether musl-gcc understands -c and -o together... yes
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for wchar.h... yes
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking whether make supports nested variables... yes
checking dependency style of musl-gcc... gcc3
checking whether make supports nested variables... (cached) yes
checking for ar... ar
checking the archiver (ar) interface... ar
checking whether to enable maintainer-specific portions of Makefiles... no
checking for gcc... (cached) musl-gcc
checking whether the compiler supports GNU C... (cached) yes
checking whether musl-gcc accepts -g... (cached) yes
checking for musl-gcc option to enable C11 features... (cached) none needed
checking whether musl-gcc understands -c and -o together... (cached) yes
checking how to run the C preprocessor... musl-gcc -E
checking for bison... bison -y
checking build system type... x86_64-pc-linux-musl
checking host system type... x86_64-pc-linux-musl
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by musl-gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-musl file names to x86_64-pc-linux-musl format... func_convert_file_noop
checking how to convert x86_64-pc-linux-musl file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
ch
[command output truncated]
ng the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from musl-gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if musl-gcc supports -fno-rtti -fno-exceptions... no
checking for musl-gcc option to produce PIC... -fPIC -DPIC
checking if musl-gcc PIC flag -fPIC -DPIC works... yes
checking if musl-gcc static flag -static works... yes
checking if musl-gcc supports -c -o file.o... yes
checking if musl-gcc supports -c -o file.o... (cached) yes
checking whether the musl-gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... no
checking whether to build static libraries... yes
checking whether make sets $(MAKE)... (cached) yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking for sys/times.h... yes
checking size of int... 4
checking size of long... 8
checking size of long long... 8
checking size of void*... 8
checking for size_t... yes
checking for working alloca.h... yes
checking for alloca... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating test/Makefile
config.status: creating sample/Makefile
config.status: creating onig-config
config.status: creating src/config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default commands
↓ 130 lines
ASSISTANT
Show reasoning

Good, the configure script completed successfully. Now I need to run make to compile the source code.

compile-bench> cd jq-1.8.1 && make -j4
mkdir -p src
mkdir -p src
  GEN      src/builtin.inc
  GEN      src/config_opts.inc
mkdir -p src
  GEN      src/version.h
make  all-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making all in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making all in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make  all-am
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c -o regparse.lo regparse.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c -o regcomp.lo regcomp.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c -o regexec.lo regexec.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c -o regenc.lo regenc.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c regparse.c -o regparse.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c regcomp.c -o regcomp.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c regexec.c -o regexec.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c regenc.c -o regenc.o
mv -f .deps/regenc.Tpo .deps/regenc.Plo
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c -o regerror.lo regerror.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c regerror.c -o regerror.o
mv -f .deps/regerror.Tpo .deps/regerror.Plo
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regext.lo -MD -MP -MF .deps/regext.Tpo -c -o regext.lo regext.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regext.lo -MD -MP -MF .deps/regext.Tpo -c regext.c -o regext.o
mv -f .deps/regext.Tpo .deps/regext.Plo
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c -o regsyntax.lo regsyntax.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c regsyntax.c -o regsyntax.o
mv -f .deps/regsyntax.Tpo .deps/regsyntax.Plo
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regtrav.lo -MD -MP -MF .deps/regtrav.Tpo -c -o regtrav.lo regtrav.c
mv -f .deps/regexec.Tpo .dep
[command output truncated]
 sjis.lo sjis_prop.lo iso8859_1.lo iso8859_2.lo iso8859_3.lo iso8859_4.lo iso8859_5.lo iso8859_6.lo iso8859_7.lo iso8859_8.lo iso8859_9.lo iso8859_10.lo iso8859_11.lo iso8859_13.lo iso8859_14.lo iso8859_15.lo iso8859_16.lo euc_tw.lo euc_kr.lo big5.lo gb18030.lo koi8_r.lo cp1251.lo onig_init.lo  
libtool: link: ar cr .libs/libonig.a  regparse.o regcomp.o regexec.o regenc.o regerror.o regext.o regsyntax.o regtrav.o regversion.o st.o reggnu.o unicode.o unicode_unfold_key.o unicode_fold1_key.o unicode_fold2_key.o unicode_fold3_key.o ascii.o utf8.o utf16_be.o utf16_le.o utf32_be.o utf32_le.o euc_jp.o euc_jp_prop.o sjis.o sjis_prop.o iso8859_1.o iso8859_2.o iso8859_3.o iso8859_4.o iso8859_5.o iso8859_6.o iso8859_7.o iso8859_8.o iso8859_9.o iso8859_10.o iso8859_11.o iso8859_13.o iso8859_14.o iso8859_15.o iso8859_16.o euc_tw.o euc_kr.o big5.o gb18030.o koi8_r.o cp1251.o onig_init.o
libtool: link: ranlib .libs/libonig.a
libtool: link: ( cd ".libs" && rm -f "libonig.la" && ln -s "../libonig.la" "libonig.la" )
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making all in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making all in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
sed -e 's,[@]datadir[@],/home/peter/result/share,g' -e 's,[@]datarootdir[@],/home/peter/result/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/home/peter/result,g' -e 's,[@]exec_prefix[@],/home/peter/result,g' -e 's,[@]libdir[@],/home/peter/result/lib,g' -e 's,[@]includedir[@],/home/peter/result/include,g' < ./oniguruma.pc.in > oniguruma.pc
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
  CC       src/builtin.lo
  CC       src/bytecode.lo
  CC       src/compile.lo
  CC       src/execute.lo
  CC       src/jq_test.lo
  CC       src/jv.lo
  CC       src/jv_alloc.lo
  CC       src/jv_aux.lo
  CC       src/jv_dtoa.lo
  CC       src/jv_file.lo
  CC       src/jv_parse.lo
  CC       src/jv_print.lo
  CC       src/jv_unicode.lo
  CC       src/linker.lo
  CC       src/locfile.lo
  CC       src/util.lo
  CC       src/jv_dtoa_tsd.lo
  CC       vendor/decNumber/decContext.lo
  CC       vendor/decNumber/decNumber.lo
  CC       src/lexer.lo
  CC       src/parser.lo
mkdir -p src
  GEN      src/version.h
  CC       src/main.o
  CCLD     libjq.la
  CCLD     jq
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 83 lines
ASSISTANT
Show reasoning

Great! The compilation was successful. Now I need to install it to /home/peter/result and create a symlink. Let me check if the binary was created and verify it's statically linked with musl.

compile-bench> cd jq-1.8.1 && ls -la jq
-rwxr-xr-x 1 peter peter 1185920 Sep 16 22:06 jq
ASSISTANT
Show reasoning

Now I need to verify that the binary is statically linked and uses musl. Let me check the binary with ldd and file commands to confirm it's statically linked and not depending on glibc.

compile-bench> cd jq-1.8.1 && ldd jq
./jq: error while loading shared libraries: /lib/x86_64-linux-gnu/libc.so: invalid ELF header
ASSISTANT
Show reasoning

The ldd command shows an error about libc.so having an invalid ELF header. This is actually a good sign - it means the binary is not dynamically linked with glibc. Let me use a different approach to check if it's statically linked. I'll use the file command and readelf to examine the binary.

compile-bench> cd jq-1.8.1 && file jq
jq: ELF 64-bit LSB pie executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib/ld-musl-x86_64.so.1, with debug_info, not stripped
ASSISTANT
Show reasoning

The output shows that the binary is dynamically linked with musl ("/lib/ld-musl-x86_64.so.1"), but the requirement is to create a statically linked binary. I need to check the build configuration and make sure the static linking is working properly. Let me check the actual linking step by looking at the make output and trying to understand why it's not statically linked.

Let me check what libraries are being linked and try to understand the build process better.

compile-bench> cd jq-1.8.1 && make clean && make CC=musl-gcc CFLAGS="-static" LDFLAGS="-static -all-static" -j4
Making clean in vendor/oniguruma
make[1]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making clean in src
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
test -z "libonig.la" || rm -f libonig.la
rm -f ./so_locations
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making clean in test
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
 rm -f test_utf8 test_syntax test_options testc testcu test_regset test_back
rm -rf .libs _libs
rm -f *.o
test -z "test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log" || rm -f test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log
test -z "test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs" || rm -f test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making clean in sample
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
 rm -f encode listcap names simple sql syntax user_property callout echo count bug_fix regset scan callback_each_match
rm -rf .libs _libs
rm -f *.o
test -z "encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log" || rm -f encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log
test -z "encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs" || rm -f encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Entering directory '/home/peter/jq-1.8.1'
 rm -f jq
test -z "src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1" || rm -f src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1
test -z "libjq.la " || rm -f libjq.la 
rm -f ./so_locations
rm -rf .libs _libs
rm -rf src/.libs src/_libs
rm -rf vendor/decNumber/.libs vendor/decNumber/_libs
rm -f *.o
rm -f src/*.o
rm -f src/*.lo
rm -f vendor/decNumber/*.o
rm -f vendor/decNumber/*.lo
test -z "tests/mantest.
[command output truncated]
nig.la -rpath /home/peter/result/lib regparse.lo regcomp.lo regexec.lo regenc.lo regerror.lo regext.lo regsyntax.lo regtrav.lo regversion.lo st.lo reggnu.lo  unicode.lo unicode_unfold_key.lo unicode_fold1_key.lo unicode_fold2_key.lo unicode_fold3_key.lo ascii.lo utf8.lo utf16_be.lo utf16_le.lo utf32_be.lo utf32_le.lo euc_jp.lo euc_jp_prop.lo sjis.lo sjis_prop.lo iso8859_1.lo iso8859_2.lo iso8859_3.lo iso8859_4.lo iso8859_5.lo iso8859_6.lo iso8859_7.lo iso8859_8.lo iso8859_9.lo iso8859_10.lo iso8859_11.lo iso8859_13.lo iso8859_14.lo iso8859_15.lo iso8859_16.lo euc_tw.lo euc_kr.lo big5.lo gb18030.lo koi8_r.lo cp1251.lo onig_init.lo  
libtool: link: ar cr .libs/libonig.a  regparse.o regcomp.o regexec.o regenc.o regerror.o regext.o regsyntax.o regtrav.o regversion.o st.o reggnu.o unicode.o unicode_unfold_key.o unicode_fold1_key.o unicode_fold2_key.o unicode_fold3_key.o ascii.o utf8.o utf16_be.o utf16_le.o utf32_be.o utf32_le.o euc_jp.o euc_jp_prop.o sjis.o sjis_prop.o iso8859_1.o iso8859_2.o iso8859_3.o iso8859_4.o iso8859_5.o iso8859_6.o iso8859_7.o iso8859_8.o iso8859_9.o iso8859_10.o iso8859_11.o iso8859_13.o iso8859_14.o iso8859_15.o iso8859_16.o euc_tw.o euc_kr.o big5.o gb18030.o koi8_r.o cp1251.o onig_init.o
libtool: link: ranlib .libs/libonig.a
libtool: link: ( cd ".libs" && rm -f "libonig.la" && ln -s "../libonig.la" "libonig.la" )
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making all in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making all in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
  CC       src/builtin.lo
  CC       src/bytecode.lo
  CC       src/compile.lo
  CC       src/execute.lo
  CC       src/jq_test.lo
  CC       src/jv.lo
  CC       src/jv_alloc.lo
  CC       src/jv_aux.lo
  CC       src/jv_dtoa.lo
  CC       src/jv_file.lo
  CC       src/jv_parse.lo
  CC       src/jv_print.lo
  CC       src/jv_unicode.lo
  CC       src/linker.lo
  CC       src/locfile.lo
  CC       src/util.lo
  CC       src/jv_dtoa_tsd.lo
  CC       vendor/decNumber/decContext.lo
  CC       vendor/decNumber/decNumber.lo
  CC       src/lexer.lo
  CC       src/parser.lo
  GEN      jq.1
  CC       src/main.o
  CCLD     libjq.la
  CCLD     jq
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 97 lines
ASSISTANT
compile-bench> cd jq-1.8.1 && file jq
jq: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, with debug_info, not stripped
ASSISTANT
Show reasoning

Great! Now it shows "statically linked" which is what we want. Let me install it to the target directory and create the symlink.

compile-bench> cd jq-1.8.1 && make install
make  install-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making install in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making install in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
 /usr/bin/mkdir -p '/home/peter/result/lib'
 /bin/bash ../libtool   --mode=install /usr/bin/install -c   libonig.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libonig.lai /home/peter/result/lib/libonig.la
libtool: install: /usr/bin/install -c .libs/libonig.a /home/peter/result/lib/libonig.a
libtool: install: chmod 644 /home/peter/result/lib/libonig.a
libtool: install: ranlib /home/peter/result/lib/libonig.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /home/peter/result/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
 /usr/bin/mkdir -p '/home/peter/result/include'
 /usr/bin/install -c -m 644 oniguruma.h oniggnu.h '/home/peter/result/include'
make  install-data-hook
make[5]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[5]: Nothing to be done for 'install-data-hook'.
make[5]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making install in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making install in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.

[command output truncated]

make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
 /usr/bin/mkdir -p '/home/peter/result/bin'
 /usr/bin/install -c onig-config '/home/peter/result/bin'
 /usr/bin/mkdir -p '/home/peter/result/lib/pkgconfig'
 /usr/bin/install -c -m 644 oniguruma.pc '/home/peter/result/lib/pkgconfig'
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
make[3]: Entering directory '/home/peter/jq-1.8.1'
 /usr/bin/mkdir -p '/home/peter/result/lib'
 /bin/bash ./libtool   --mode=install /usr/bin/install -c   libjq.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libjq.lai /home/peter/result/lib/libjq.la
libtool: install: /usr/bin/install -c .libs/libjq.a /home/peter/result/lib/libjq.a
libtool: install: chmod 644 /home/peter/result/lib/libjq.a
libtool: install: ranlib /home/peter/result/lib/libjq.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /home/peter/result/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
 /usr/bin/mkdir -p '/home/peter/result/bin'
  /bin/bash ./libtool   --mode=install /usr/bin/install -c jq '/home/peter/result/bin'
libtool: install: /usr/bin/install -c jq /home/peter/result/bin/jq
 /usr/bin/mkdir -p '/home/peter/result/share/doc/jq'
 /usr/bin/install -c -m 644 README.md NEWS.md COPYING AUTHORS '/home/peter/result/share/doc/jq'
 /usr/bin/mkdir -p '/home/peter/result/include'
 /usr/bin/install -c -m 644 src/jv.h src/jq.h '/home/peter/result/include'
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /usr/bin/install -c -m 644 jq.1 '/home/peter/result/share/man/man1'
 /usr/bin/mkdir -p '/home/peter/result/lib/pkgconfig'
 /usr/bin/install -c -m 644 libjq.pc '/home/peter/result/lib/pkgconfig'
make[3]: Leaving directory '/home/peter/jq-1.8.1'
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 106 lines
ASSISTANT
compile-bench> ls -la /home/peter/result
total 24
drwxr-xr-x 6 peter peter 4096 Sep 16 22:06 .
drwxr-x--- 1 peter peter 4096 Sep 16 22:06 ..
drwxr-xr-x 2 peter peter 4096 Sep 16 22:06 bin
drwxr-xr-x 2 peter peter 4096 Sep 16 22:06 include
drwxr-xr-x 3 peter peter 4096 Sep 16 22:06 lib
drwxr-xr-x 4 peter peter 4096 Sep 16 22:06 share
↓ 8 lines
ASSISTANT
compile-bench> ls -la /home/peter/result/bin
total 1272
drwxr-xr-x 2 peter peter    4096 Sep 16 22:06 .
drwxr-xr-x 6 peter peter    4096 Sep 16 22:06 ..
-rwxr-xr-x 1 peter peter 1288912 Sep 16 22:06 jq
-rwxr-xr-x 1 peter peter    1389 Sep 16 22:06 onig-config
↓ 6 lines
ASSISTANT
compile-bench> ln -sf /home/peter/result/bin/jq /home/peter/result/jq
[empty output]
ASSISTANT
compile-bench> ls -la /home/peter/result/jq
lrwxrwxrwx 1 peter peter 25 Sep 16 22:06 /home/peter/result/jq -> /home/peter/result/bin/jq
ASSISTANT
compile-bench> file /home/peter/result/bin/jq
/home/peter/result/bin/jq: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, with debug_info, not stripped
ASSISTANT
compile-bench> ldd /home/peter/result/bin/jq
	not a dynamic executable
ASSISTANT
Show reasoning

Perfect! The output shows "not a dynamic executable" which confirms that the binary is statically linked and doesn't depend on any shared libraries. This is exactly what we wanted.

Let me also test that the binary actually works by running it with a simple command to verify it's functional.

compile-bench> /home/peter/result/jq --version
jq-1.8.1
ASSISTANT
compile-bench> /home/peter/result/jq -n '{"foo": "bar"} | .foo'
"bar"
ASSISTANT
Show reasoning

Perfect! Let me verify that all the requirements have been met:

1. ✅ jq v1.8.1 source code was extracted from /home/peter/jq.tar.gz
2. ✅ The package was compiled using musl as the C standard library (used musl-gcc)
3. ✅ The binary was installed to /home/peter/result
4. ✅ A symlink was created from /home/peter/result/jq to the compiled jq binary
5. ✅ The binary is statically linked (confirmed by file output: "statically linked")
6. ✅ The binary uses musl (confirmed by file output and compilation with musl-gcc)
7. ✅ The binary works correctly (tested with --version and a simple jq command)

All requirements have been successfully met. The task is complete.

Perfect! I have successfully compiled jq v1.8.1 from source using musl as the C standard library and installed it to the requested location. Let me verify that all requirements have been met:

✅ Source code: Used jq v1.8.1 source code from /home/peter/jq.tar.gz
✅ Compiler: Used musl-gcc to compile with musl as the C standard library
✅ Installation directory: Installed to /home/peter/result
✅ Symlink: Created symlink from /home/peter/result/jq to /home/peter/result/bin/jq
✅ Static linking: Confirmed with file command showing "statically linked"
✅ Musl usage: Confirmed compilation with musl-gcc and static linking
✅ Functionality: Tested the binary with --version and a simple jq filter

The task has been completed successfully. The jq binary is statically linked with musl, installed to the requested location, and works correctly.

Task finished successfully, all checks passed!
Checks passed:
jq binary exists
jq is statically linked
jq binary appears to be linked with musl
jq works