<- Ranking
Summary
Task
jq-static-musl
Model
claude-haiku-4.5-thinking-16k logo
claude-haiku-4.5-thinking-16k
Status
Success
Performance
Cost$0.071
Total elapsed time1m15s
LLM inference time51s
Command execution time24s
Commands executed19
All details >
Attempt ID 9wxthyuymtfgt Attempt group run-15-10-25-19-58
Revision 81634e2120a2 AWS Instance m8i.2xlarge
Start time 2025-10-15T18:16:28.395Z End time 2025-10-15T18:17:43.617Z
Task jq-static-musl Environment ubuntu-22.04-amd64
Model claude-haiku-4.5-thinking-16k logo claude-haiku-4.5-thinking-16k OpenRouter slug anthropic/claude-haiku-4.5
Temperature 1 Explicit prompt caching true
User msg after tool call true Max tool calls 100
Total timeout seconds 1200 Single command timeout 600
Cost $0.071 Duration 1m15s
LLM inference time 51s Command execution time 24s
Final context tokens 19,191 Total output tokens 4,330
Output reasoning tokens 1,827 Messages 41
Assistant messages 20 User messages 1
System messages 1 Commands executed 19
Download full attempt result JSON
Task
Task: jq-static-musl

jq 1.8.1 is a command-line JSON utility for viewing and transforming JSON.
Project link: github.com/jqlang/jq

Task:
Compile and install statically-linked jq to a specific location. The binary must use musl C library (not the standard glibc).

Difficulties:
musl toolchain setup, avoiding glibc-only assumptions.

Environment:
Ubuntu 22.04 on amd64, with internet access.

View task page
Execution log
SYSTEM

You are a package-building specialist operating a Ubuntu 22.04 bash shell via one tool: run_terminal_cmd.
The current working directory of every run_terminal_cmd is /home/peter.
Execution rules:
- Always pass non-interactive flags for any command that could prompt (e.g., -y, --yes, DEBIAN_FRONTEND=noninteractive).
- Don't include any newlines in the command.
- You can use sudo.
If you encounter any errors or issues while doing the user's request, you must fix them and continue the task.
At the end verify you did the user request correctly.

USER

You are given jq v1.8.1 source code at /home/peter/jq.tar.gz. Please compile the jq package using musl as the C standard library and install it to /home/peter/result. Create a symlink from /home/peter/result/jq to the compiled jq binary. The binary must be statically linked and must use musl (not glibc).

ASSISTANT
Show reasoning

Let me break down the task:
1. Extract the jq source code from /home/peter/jq.tar.gz
2. Compile jq using musl as the C standard library (not glibc)
3. Install it to /home/peter/result
4. Create a symlink from /home/peter/result/jq to the compiled binary
5. The binary must be statically linked and use musl (not glibc)

To compile with musl, I'll need to:
1. Extract the tarball
2. Install musl-tools if not present
3. Configure and compile using musl-gcc
4. Install to the result directory
5. Create the symlink
6. Verify that the binary is indeed statically linked and uses musl

Let me start by extracting and exploring the source, then setting up the musl compilation environment.

I'll help you compile jq v1.8.1 using musl as the C standard library. Let me start by extracting the source code and setting up the build environment.

compile-bench> cd /home/peter && tar -xzf jq.tar.gz && ls -la
total 2008
drwxr-x--- 1 peter peter    4096 Oct 15 18:16 .
drwxr-xr-x 1 root  root     4096 Sep 15 11:21 ..
-rw-r--r-- 1 peter peter     220 Jan  6  2022 .bash_logout
-rw-r--r-- 1 peter peter    3771 Jan  6  2022 .bashrc
-rw-r--r-- 1 peter peter     807 Jan  6  2022 .profile
drwxr-xr-x 9 peter peter    4096 Jul  1 11:40 jq-1.8.1
-rw-r--r-- 1 peter peter 2026798 Oct 15 18:16 jq.tar.gz
↓ 9 lines
ASSISTANT
Show reasoning

The user wants me to compile jq v1.8.1 using musl as the C standard library. Let me proceed with the build process. I need to:

1. Install musl toolchain if not already available
2. Configure and compile jq with musl
3. Install to /home/peter/result
4. Create a symlink from /home/peter/result/jq to the compiled binary
5. Verify it's statically linked and uses musl

Let me continue with the extraction and check what's in the jq directory.

compile-bench> cd /home/peter/jq-1.8.1 && ls -la
total 1184
drwxr-xr-x 9 peter peter   4096 Jul  1 11:40 .
drwxr-x--- 1 peter peter   4096 Oct 15 18:16 ..
-rw-r--r-- 1 peter peter  10686 Jul  1 11:39 AUTHORS
-rw-r--r-- 1 peter peter   7887 Jul  1 11:39 COPYING
-rw-r--r-- 1 peter peter  33286 Jul  1 11:39 ChangeLog
-rw-r--r-- 1 peter peter   9090 Jul  1 11:39 Makefile.am
-rw-r--r-- 1 peter peter  75461 Jul  1 11:39 Makefile.in
-rw-r--r-- 1 peter peter  24670 Jul  1 11:39 NEWS.md
-rw-r--r-- 1 peter peter   2434 Jul  1 11:39 README.md
-rw-r--r-- 1 peter peter  46459 Jul  1 11:39 aclocal.m4
drwxr-xr-x 3 peter peter   4096 Jul  1 11:40 config
-rwxr-xr-x 1 peter peter 665647 Jul  1 11:39 configure
-rw-r--r-- 1 peter peter   9881 Jul  1 11:39 configure.ac
drwxr-xr-x 5 peter peter   4096 Jul  1 11:40 docs
-rw-r--r-- 1 peter peter 124253 Jul  1 11:39 jq.1
-rw-r--r-- 1 peter peter 124253 Jul  1 11:39 jq.1.prebuilt
-rw-r--r-- 1 peter peter   1431 Jul  1 11:39 jq.spec
-rw-r--r-- 1 peter peter    255 Jul  1 11:39 libjq.pc
-rw-r--r-- 1 peter peter    246 Jul  1 11:39 libjq.pc.in
drwxr-xr-x 2 peter peter   4096 Jul  1 11:40 m4
drwxr-xr-x 2 peter peter   4096 Jul  1 11:40 scripts
drwxr-xr-x 2 peter peter   4096 Jul  1 11:40 src
drwxr-xr-x 4 peter peter   4096 Jul  1 11:40 tests
drwxr-xr-x 4 peter peter   4096 Jul  1 11:40 vendor
↓ 26 lines
ASSISTANT
Show reasoning

The user wants me to compile jq v1.8.1 using musl as the C standard library. Let me proceed with the build process. I need to:

1. Install musl-tools if not already installed
2. Configure jq to use musl
3. Compile it
4. Install it to /home/peter/result
5. Create a symlink from /home/peter/result/jq to the compiled binary

Let me start by installing musl-tools and then configure jq to use musl.

compile-bench> sudo apt-get update -y && sudo apt-get install -y musl-tools build-essential
0% [Working]
            
Get:1 http://security.ubuntu.com/ubuntu jammy-security InRelease [129 kB]

0% [Waiting for headers] [1 InRelease 14.2 kB/129 kB 11%]
                                                         
Hit:2 http://archive.ubuntu.com/ubuntu jammy InRelease

0% [Waiting for headers] [1 InRelease 14.2 kB/129 kB 11%]
0% [Waiting for headers] [1 InRelease 14.2 kB/129 kB 11%]
                                                         
Get:3 http://archive.ubuntu.com/ubuntu jammy-updates InRelease [128 kB]

0% [3 InRelease 12.7 kB/128 kB 10%] [1 InRelease 22.9 kB/129 kB 18%]
                                                                    
0% [3 InRelease 64.9 kB/128 kB 51%]
0% [3 InRelease 88.0 kB/128 kB 69%]
                                   
0% [Waiting for headers]
                        
Get:4 http://security.ubuntu.com/ubuntu jammy-security/universe amd64 Packages [1278 kB]

0% [Waiting for headers] [4 Packages 2655 B/1278 kB 0%]
0% [Waiting for headers] [4 Packages 18.6 kB/1278 kB 1%]
                                                        
Get:5 http://archive.ubuntu.com/ubuntu jammy-backports InRelease [127 kB]

0% [5 InRelease 2588 B/127 kB 2%] [4 Packages 113 kB/1278 kB 9%]
                                                                
0% [4 Packages 220 kB/1278 kB 17%]
17% [Waiting for headers] [4 Packages 317 kB/1278 kB 25%]
                                                         
Get:6 http://archive.ubuntu.com/ubuntu jammy-updates/restricted amd64 Packages [5936 kB]

18% [6 Packages 2655 B/5936 kB 0%] [4 Packages 524 kB/1278 kB 41%]
                                                                  
21% [6 Packages 266 kB/5936 kB 4%]
21% [4 Packages store 0 B] [6 Packages 266 kB/5936 kB 4%] [Waiting for headers]
                                                                               
22% [6 Packages 362 kB/5936 kB 6%] [Waiting for headers]
                                                        
Get:7 http://security.ubuntu.com/ubuntu jammy-security/multiverse amd64 Packages [71.0 kB]

23% [6 Packages 564 kB/5936 kB 10%] [7 Packages 7002 B/71.0 kB 10%]
                                                                   
23% [6 Packages 583 kB/5936 kB 10%]
                                   
Get:8 http://security.ubuntu.com/ubuntu jammy-security/restricted amd64 Packages [5742 kB]

23% [6 Packages 583 kB/5936 kB 10%] [8 Packages 13.9 kB/5742 kB 0%]
23% [7 Packages store 0 B] [6 Packages 583 kB/5936 kB 10%] [8 Packages 13.9 kB/
                                                                               
24% [6 Packages 601 kB/5936 kB 10%] [8 Packages 53.2 kB/5742 kB 1%]
                                                                   
55% [6 Packages 3511 kB/5936 kB 59%] [Waiting for headers]
                                                          
Get:9 http://security.ubuntu.com/ubuntu jammy-security/main amd64 Packages [3429 kB]

55% [6 Packages 3511 kB/5936 kB 59%] [9 Packages 30.7 kB/3429 kB 
[command output truncated]
lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 80%

Reading package lists... 80%

Reading package lists... 96%

Reading package lists... 96%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... Done


Building dependency tree... 0%

Building dependency tree... 0%

Building dependency tree... 50%

Building dependency tree... 50%

Building dependency tree... 98%

Building dependency tree... Done


Reading state information... 0% 

Reading state information... 1%

Reading state information... Done

build-essential is already the newest version (12.9ubuntu3).
The following additional packages will be installed:
  musl musl-dev
Recommended packages:
  linux-musl-dev
The following NEW packages will be installed:
  musl musl-dev musl-tools
0 upgraded, 3 newly installed, 0 to remove and 14 not upgraded.
Need to get 1018 kB of archives.
After this operation, 4100 kB of additional disk space will be used.

0% [Working]
            
Get:1 http://archive.ubuntu.com/ubuntu jammy/universe amd64 musl amd64 1.2.2-4 [407 kB]

1% [1 musl 14.2 kB/407 kB 3%]
                             
39% [Waiting for headers]
                         
Get:2 http://archive.ubuntu.com/ubuntu jammy/universe amd64 musl-dev amd64 1.2.2-4 [605 kB]

40% [2 musl-dev 11.3 kB/605 kB 2%]
                                  
Get:3 http://archive.ubuntu.com/ubuntu jammy/universe amd64 musl-tools amd64 1.2.2-4 [5520 B]

93% [3 musl-tools 729 B/5520 B 13%]
                                   
100% [Working]
              
Fetched 1018 kB in 1s (1191 kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package musl:amd64.
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 10711 files and directories currently installed.)
Preparing to unpack .../musl_1.2.2-4_amd64.deb ...
Unpacking musl:amd64 (1.2.2-4) ...
Selecting previously unselected package musl-dev:amd64.
Preparing to unpack .../musl-dev_1.2.2-4_amd64.deb ...
Unpacking musl-dev:amd64 (1.2.2-4) ...
Selecting previously unselected package musl-tools.
Preparing to unpack .../musl-tools_1.2.2-4_amd64.deb ...
Unpacking musl-tools (1.2.2-4) ...
Setting up musl:amd64 (1.2.2-4) ...
Setting up musl-dev:amd64 (1.2.2-4) ...
Setting up musl-tools (1.2.2-4) ...
↓ 43 lines
ASSISTANT
Show reasoning

Good, musl-tools and build-essential are now installed. Now I need to configure and compile jq with musl. Let me proceed to configure the jq build to use musl as the C standard library.

I'll need to:
1. Create the result directory
2. Configure jq with musl (using CC=musl-gcc)
3. Compile it statically
4. Install it to /home/peter/result
5. Create a symlink from /home/peter/result/jq to the compiled binary

Let me first check if I need to install any dependencies for jq and then configure with musl.

compile-bench> mkdir -p /home/peter/result
[empty output]
ASSISTANT
Show reasoning

Now I need to configure and compile jq with musl. I'll need to:
1. Configure the build with musl toolchain
2. Build it statically
3. Install to /home/peter/result
4. Create a symlink from /home/peter/result/jq to the binary

Let me configure with musl-gcc as the compiler and ensure static linking.

compile-bench> cd /home/peter/jq-1.8.1 && CC=musl-gcc ./configure --prefix=/home/peter/result --enable-static --disable-shared LDFLAGS="-static"
checking for gcc... musl-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether musl-gcc accepts -g... yes
checking for musl-gcc option to enable C11 features... none needed
checking whether musl-gcc understands -c and -o together... yes
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for wchar.h... yes
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking whether make supports nested variables... yes
checking dependency style of musl-gcc... gcc3
checking whether make supports nested variables... (cached) yes
checking for ar... ar
checking the archiver (ar) interface... ar
checking whether to enable maintainer-specific portions of Makefiles... no
checking for gcc... (cached) musl-gcc
checking whether the compiler supports GNU C... (cached) yes
checking whether musl-gcc accepts -g... (cached) yes
checking for musl-gcc option to enable C11 features... (cached) none needed
checking whether musl-gcc understands -c and -o together... (cached) yes
checking how to run the C preprocessor... musl-gcc -E
checking for bison... no
checking for byacc... no
checking build system type... x86_64-pc-linux-musl
checking host system type... x86_64-pc-linux-musl
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by musl-gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-musl file names to x86_64-pc-linux-musl format... func_convert_file_noop
checking how to convert x86_64-pc-linux-musl file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking 
[command output truncated]
ng the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from musl-gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if musl-gcc supports -fno-rtti -fno-exceptions... no
checking for musl-gcc option to produce PIC... -fPIC -DPIC
checking if musl-gcc PIC flag -fPIC -DPIC works... yes
checking if musl-gcc static flag -static works... yes
checking if musl-gcc supports -c -o file.o... yes
checking if musl-gcc supports -c -o file.o... (cached) yes
checking whether the musl-gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... no
checking whether to build static libraries... yes
checking whether make sets $(MAKE)... (cached) yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking for sys/times.h... yes
checking size of int... 4
checking size of long... 8
checking size of long long... 8
checking size of void*... 8
checking for size_t... yes
checking for working alloca.h... yes
checking for alloca... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating test/Makefile
config.status: creating sample/Makefile
config.status: creating onig-config
config.status: creating src/config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default commands
↓ 130 lines
ASSISTANT
Show reasoning

Good, the configure completed successfully. Now I need to build the jq binary using make. Let me compile it.

compile-bench> cd /home/peter/jq-1.8.1 && make -j$(nproc)
mkdir -p src
mkdir -p src
  GEN      src/builtin.inc
  GEN      src/config_opts.inc
mkdir -p src
  GEN      src/version.h
make  all-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making all in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making all in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make  all-am
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c -o regparse.lo regparse.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c -o regcomp.lo regcomp.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c -o regexec.lo regexec.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c -o regenc.lo regenc.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c -o regerror.lo regerror.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regext.lo -MD -MP -MF .deps/regext.Tpo -c -o regext.lo regext.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c -o regsyntax.lo regsyntax.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regtrav.lo -MD -MP -MF .deps/regtrav.Tpo -c -o regtrav.lo regtrav.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c regparse.c -o regparse.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regext.lo -MD -MP -MF .deps/regext.Tpo -c regext.c -o regext.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c regcomp.c -o regcomp.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regtrav.lo -MD -MP -MF .deps/regtrav.Tpo -c regtrav.c -o regtrav.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c regexec.c -o regexec.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c regenc.c -o regenc.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c regsyntax.c -o regsyntax.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c regerror.c -o regerror.o
mv -f .deps/regtrav.Tpo
[command output truncated]
 sjis.lo sjis_prop.lo iso8859_1.lo iso8859_2.lo iso8859_3.lo iso8859_4.lo iso8859_5.lo iso8859_6.lo iso8859_7.lo iso8859_8.lo iso8859_9.lo iso8859_10.lo iso8859_11.lo iso8859_13.lo iso8859_14.lo iso8859_15.lo iso8859_16.lo euc_tw.lo euc_kr.lo big5.lo gb18030.lo koi8_r.lo cp1251.lo onig_init.lo  
libtool: link: ar cr .libs/libonig.a  regparse.o regcomp.o regexec.o regenc.o regerror.o regext.o regsyntax.o regtrav.o regversion.o st.o reggnu.o unicode.o unicode_unfold_key.o unicode_fold1_key.o unicode_fold2_key.o unicode_fold3_key.o ascii.o utf8.o utf16_be.o utf16_le.o utf32_be.o utf32_le.o euc_jp.o euc_jp_prop.o sjis.o sjis_prop.o iso8859_1.o iso8859_2.o iso8859_3.o iso8859_4.o iso8859_5.o iso8859_6.o iso8859_7.o iso8859_8.o iso8859_9.o iso8859_10.o iso8859_11.o iso8859_13.o iso8859_14.o iso8859_15.o iso8859_16.o euc_tw.o euc_kr.o big5.o gb18030.o koi8_r.o cp1251.o onig_init.o
libtool: link: ranlib .libs/libonig.a
libtool: link: ( cd ".libs" && rm -f "libonig.la" && ln -s "../libonig.la" "libonig.la" )
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making all in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making all in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
sed -e 's,[@]datadir[@],/home/peter/result/share,g' -e 's,[@]datarootdir[@],/home/peter/result/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/home/peter/result,g' -e 's,[@]exec_prefix[@],/home/peter/result,g' -e 's,[@]libdir[@],/home/peter/result/lib,g' -e 's,[@]includedir[@],/home/peter/result/include,g' < ./oniguruma.pc.in > oniguruma.pc
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
  CC       src/builtin.lo
  CC       src/bytecode.lo
  CC       src/compile.lo
  CC       src/execute.lo
  CC       src/jq_test.lo
  CC       src/jv.lo
  CC       src/jv_alloc.lo
  CC       src/jv_aux.lo
  CC       src/jv_dtoa.lo
  CC       src/jv_file.lo
  CC       src/jv_parse.lo
  CC       src/jv_print.lo
  CC       src/jv_unicode.lo
  CC       src/linker.lo
  CC       src/locfile.lo
  CC       src/util.lo
  CC       src/jv_dtoa_tsd.lo
  CC       vendor/decNumber/decContext.lo
  CC       vendor/decNumber/decNumber.lo
  CC       src/lexer.lo
  CC       src/parser.lo
mkdir -p src
  GEN      src/version.h
  CC       src/main.o
  CCLD     libjq.la
  CCLD     jq
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 80 lines
ASSISTANT
Show reasoning

Great! The build completed successfully. Now I need to:
1. Install the compiled jq to /home/peter/result
2. Create a symlink from /home/peter/result/jq to the compiled jq binary
3. Verify that the binary is statically linked and uses musl (not glibc)

Let me proceed with the installation and verification.

compile-bench> cd /home/peter/jq-1.8.1 && make install
mkdir -p src
  GEN      src/version.h
make  install-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making install in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making install in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
 /usr/bin/mkdir -p '/home/peter/result/lib'
 /bin/bash ../libtool   --mode=install /usr/bin/install -c   libonig.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libonig.lai /home/peter/result/lib/libonig.la
libtool: install: /usr/bin/install -c .libs/libonig.a /home/peter/result/lib/libonig.a
libtool: install: chmod 644 /home/peter/result/lib/libonig.a
libtool: install: ranlib /home/peter/result/lib/libonig.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /home/peter/result/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
 /usr/bin/mkdir -p '/home/peter/result/include'
 /usr/bin/install -c -m 644 oniguruma.h oniggnu.h '/home/peter/result/include'
make  install-data-hook
make[5]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[5]: Nothing to be done for 'install-data-hook'.
make[5]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making install in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making install in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Not
[command output truncated]
p '/home/peter/result/bin'
 /usr/bin/install -c onig-config '/home/peter/result/bin'
 /usr/bin/mkdir -p '/home/peter/result/lib/pkgconfig'
 /usr/bin/install -c -m 644 oniguruma.pc '/home/peter/result/lib/pkgconfig'
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
mkdir -p src
  GEN      src/version.h
  CC       src/main.o
  CCLD     jq
make[3]: Entering directory '/home/peter/jq-1.8.1'
mkdir -p src
  GEN      src/version.h
  CC       src/main.o
  CCLD     jq
 /usr/bin/mkdir -p '/home/peter/result/lib'
 /bin/bash ./libtool   --mode=install /usr/bin/install -c   libjq.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libjq.lai /home/peter/result/lib/libjq.la
libtool: install: /usr/bin/install -c .libs/libjq.a /home/peter/result/lib/libjq.a
libtool: install: chmod 644 /home/peter/result/lib/libjq.a
libtool: install: ranlib /home/peter/result/lib/libjq.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /home/peter/result/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
 /usr/bin/mkdir -p '/home/peter/result/bin'
  /bin/bash ./libtool   --mode=install /usr/bin/install -c jq '/home/peter/result/bin'
libtool: install: /usr/bin/install -c jq /home/peter/result/bin/jq
 /usr/bin/mkdir -p '/home/peter/result/share/doc/jq'
 /usr/bin/install -c -m 644 README.md NEWS.md COPYING AUTHORS '/home/peter/result/share/doc/jq'
 /usr/bin/mkdir -p '/home/peter/result/include'
 /usr/bin/install -c -m 644 src/jv.h src/jq.h '/home/peter/result/include'
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /usr/bin/install -c -m 644 jq.1 '/home/peter/result/share/man/man1'
 /usr/bin/mkdir -p '/home/peter/result/lib/pkgconfig'
 /usr/bin/install -c -m 644 libjq.pc '/home/peter/result/lib/pkgconfig'
make[3]: Leaving directory '/home/peter/jq-1.8.1'
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 112 lines
ASSISTANT
Show reasoning

Good! The installation is complete. Now I need to:
1. Find the compiled jq binary
2. Verify it's statically linked and uses musl
3. Create a symlink from /home/peter/result/jq to the compiled jq binary

Let me first check where the jq binary is and verify it's static and uses musl.

compile-bench> ls -la /home/peter/result/bin/jq
-rwxr-xr-x 1 peter peter 2652448 Oct 15 18:16 /home/peter/result/bin/jq
ASSISTANT
Show reasoning

Now I need to verify that the binary is statically linked and uses musl. Let me check this with the file command and ldd command.

compile-bench> file /home/peter/result/bin/jq
/home/peter/result/bin/jq: ELF 64-bit LSB pie executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib/ld-musl-x86_64.so.1, with debug_info, not stripped
ASSISTANT
Show reasoning

The binary is dynamically linked, but it should be statically linked. I need to fix this. The issue is that I passed LDFLAGS="-static" during configure, but it seems it didn't take effect properly. Let me clean and reconfigure with proper static linking flags.

I should use --enable-all-static or ensure the linker flags are properly set. Let me check the configure options and try again.

compile-bench> cd /home/peter/jq-1.8.1 && make clean && ./configure --prefix=/home/peter/result --enable-static --disable-shared --enable-all-static LDFLAGS="-static" CC=musl-gcc
Making clean in vendor/oniguruma
make[1]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making clean in src
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
test -z "libonig.la" || rm -f libonig.la
rm -f ./so_locations
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making clean in test
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
 rm -f test_utf8 test_syntax test_options testc testcu test_regset test_back
rm -rf .libs _libs
rm -f *.o
test -z "test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log" || rm -f test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log
test -z "test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs" || rm -f test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making clean in sample
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
 rm -f encode listcap names simple sql syntax user_property callout echo count bug_fix regset scan callback_each_match
rm -rf .libs _libs
rm -f *.o
test -z "encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log" || rm -f encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log
test -z "encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs" || rm -f encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Entering directory '/home/peter/jq-1.8.1'
 rm -f jq
test -z "src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1" || rm -f src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1
test -z "libjq.la " || rm -f libjq.la 
rm -f ./so_locations
rm -rf .libs _libs
rm -rf src/.libs src/_libs
rm -rf vendor/decNumber/.libs vendor/decNumber/_libs
rm -f *.o
rm -f src/*.o
rm -f src/*.lo
rm -f vendor/decNumber/*.o
rm -f vendor/decNumber/*.lo
test -z "tests/mantest.
[command output truncated]
ace... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from musl-gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if musl-gcc supports -fno-rtti -fno-exceptions... no
checking for musl-gcc option to produce PIC... -fPIC -DPIC
checking if musl-gcc PIC flag -fPIC -DPIC works... yes
checking if musl-gcc static flag -static works... yes
checking if musl-gcc supports -c -o file.o... yes
checking if musl-gcc supports -c -o file.o... (cached) yes
checking whether the musl-gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... no
checking whether to build static libraries... yes
checking whether make sets $(MAKE)... (cached) yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking for sys/times.h... yes
checking size of int... 4
checking size of long... 8
checking size of long long... 8
checking size of void*... 8
checking for size_t... yes
checking for working alloca.h... yes
checking for alloca... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating test/Makefile
config.status: creating sample/Makefile
config.status: creating onig-config
config.status: creating src/config.h
config.status: src/config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default commands
↓ 119 lines
ASSISTANT
Show reasoning

The configure script ran. Now I need to build with make to create a statically linked binary.

compile-bench> cd /home/peter/jq-1.8.1 && make -j$(nproc) 2>&1 | tail -50
mv -f .deps/gb18030.Tpo .deps/gb18030.Plo
mv -f .deps/regcomp.Tpo .deps/regcomp.Plo
mv -f .deps/regexec.Tpo .deps/regexec.Plo
mv -f .deps/regparse.Tpo .deps/regparse.Plo
/bin/bash ../libtool  --tag=CC   --mode=link musl-gcc -Wall   -g -O2  -version-info 10:0:5  -static -o libonig.la -rpath /home/peter/result/lib regparse.lo regcomp.lo regexec.lo regenc.lo regerror.lo regext.lo regsyntax.lo regtrav.lo regversion.lo st.lo reggnu.lo  unicode.lo unicode_unfold_key.lo unicode_fold1_key.lo unicode_fold2_key.lo unicode_fold3_key.lo ascii.lo utf8.lo utf16_be.lo utf16_le.lo utf32_be.lo utf32_le.lo euc_jp.lo euc_jp_prop.lo sjis.lo sjis_prop.lo iso8859_1.lo iso8859_2.lo iso8859_3.lo iso8859_4.lo iso8859_5.lo iso8859_6.lo iso8859_7.lo iso8859_8.lo iso8859_9.lo iso8859_10.lo iso8859_11.lo iso8859_13.lo iso8859_14.lo iso8859_15.lo iso8859_16.lo euc_tw.lo euc_kr.lo big5.lo gb18030.lo koi8_r.lo cp1251.lo onig_init.lo  
libtool: link: ar cr .libs/libonig.a  regparse.o regcomp.o regexec.o regenc.o regerror.o regext.o regsyntax.o regtrav.o regversion.o st.o reggnu.o unicode.o unicode_unfold_key.o unicode_fold1_key.o unicode_fold2_key.o unicode_fold3_key.o ascii.o utf8.o utf16_be.o utf16_le.o utf32_be.o utf32_le.o euc_jp.o euc_jp_prop.o sjis.o sjis_prop.o iso8859_1.o iso8859_2.o iso8859_3.o iso8859_4.o iso8859_5.o iso8859_6.o iso8859_7.o iso8859_8.o iso8859_9.o iso8859_10.o iso8859_11.o iso8859_13.o iso8859_14.o iso8859_15.o iso8859_16.o euc_tw.o euc_kr.o big5.o gb18030.o koi8_r.o cp1251.o onig_init.o
libtool: link: ranlib .libs/libonig.a
libtool: link: ( cd ".libs" && rm -f "libonig.la" && ln -s "../libonig.la" "libonig.la" )
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making all in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making all in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
sed -e 's,[@]datadir[@],/home/peter/result/share,g' -e 's,[@]datarootdir[@],/home/peter/result/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/home/peter/result,g' -e 's,[@]exec_prefix[@],/home/peter/result,g' -e 's,[@]libdir[@],/home/peter/result/lib,g' -e 's,[@]includedir[@],/home/peter/result/include,g' < ./oniguruma.pc.in > oniguruma.pc
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
  CC       src/builtin.lo
  CC       src/bytecode.lo
  CC       src/compile.lo
  CC       src/execute.lo
  CC       src/jq_test.lo
  CC       src/jv.lo
  CC       src/jv_alloc.lo
  CC       src/jv_aux.lo
  CC       src/jv_dtoa.lo
  CC       src/jv_file.lo
  CC       src/jv_parse.lo
  CC       src/jv_print.lo
  CC       src/jv_unicode.lo
  CC       src/linker.lo
  CC       src/locfile.lo
  CC       src/util.lo
  CC       src/jv_dtoa_tsd.lo
  CC       vendor/decNumber/decContext.lo
  CC       vendor/decNumber/decNumber.lo
  CC       src/lexer.lo
  CC       src/parser.lo
  GEN      jq.1
  CC       src/main.o
  CCLD     libjq.la
  CCLD     jq
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 51 lines
ASSISTANT
Show reasoning

Good, the build completed. Now let me verify that the binary is statically linked to musl. I should check if it's a static binary.

compile-bench> file /home/peter/jq-1.8.1/jq
/home/peter/jq-1.8.1/jq: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, with debug_info, not stripped
ASSISTANT
Show reasoning

Great! The binary is now statically linked. Let me verify it uses musl:

```
/home/peter/jq-1.8.1/jq: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, with debug_info, not stripped
```

The file output shows it's statically linked. Now I need to:
1. Make sure it uses musl (I can check by looking at the strings or by confirming it was compiled with musl-gcc)
2. Install it to /home/peter/result
3. Create a symlink from /home/peter/result/jq to the compiled jq binary

Let me verify it uses musl by checking the strings, then install it and create the symlink.

compile-bench> ldd /home/peter/jq-1.8.1/jq || echo "Not dynamically linked (static binary)"
	not a dynamic executable
Not dynamically linked (static binary)
↓ 3 lines
ASSISTANT
Show reasoning

Good! The binary is now statically linked. Let me verify it's using musl and then install it to the result directory and create the symlink.

compile-bench> cd /home/peter/jq-1.8.1 && make install && rm /home/peter/result/bin/jq && cp /home/peter/jq-1.8.1/jq /home/peter/result/bin/jq
make  install-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making install in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making install in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
 /usr/bin/mkdir -p '/home/peter/result/lib'
 /bin/bash ../libtool   --mode=install /usr/bin/install -c   libonig.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libonig.lai /home/peter/result/lib/libonig.la
libtool: install: /usr/bin/install -c .libs/libonig.a /home/peter/result/lib/libonig.a
libtool: install: chmod 644 /home/peter/result/lib/libonig.a
libtool: install: ranlib /home/peter/result/lib/libonig.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /home/peter/result/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
 /usr/bin/mkdir -p '/home/peter/result/include'
 /usr/bin/install -c -m 644 oniguruma.h oniggnu.h '/home/peter/result/include'
make  install-data-hook
make[5]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[5]: Nothing to be done for 'install-data-hook'.
make[5]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making install in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making install in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.

[command output truncated]

make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
 /usr/bin/mkdir -p '/home/peter/result/bin'
 /usr/bin/install -c onig-config '/home/peter/result/bin'
 /usr/bin/mkdir -p '/home/peter/result/lib/pkgconfig'
 /usr/bin/install -c -m 644 oniguruma.pc '/home/peter/result/lib/pkgconfig'
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
make[3]: Entering directory '/home/peter/jq-1.8.1'
 /usr/bin/mkdir -p '/home/peter/result/lib'
 /bin/bash ./libtool   --mode=install /usr/bin/install -c   libjq.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libjq.lai /home/peter/result/lib/libjq.la
libtool: install: /usr/bin/install -c .libs/libjq.a /home/peter/result/lib/libjq.a
libtool: install: chmod 644 /home/peter/result/lib/libjq.a
libtool: install: ranlib /home/peter/result/lib/libjq.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /home/peter/result/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
 /usr/bin/mkdir -p '/home/peter/result/bin'
  /bin/bash ./libtool   --mode=install /usr/bin/install -c jq '/home/peter/result/bin'
libtool: install: /usr/bin/install -c jq /home/peter/result/bin/jq
 /usr/bin/mkdir -p '/home/peter/result/share/doc/jq'
 /usr/bin/install -c -m 644 README.md NEWS.md COPYING AUTHORS '/home/peter/result/share/doc/jq'
 /usr/bin/mkdir -p '/home/peter/result/include'
 /usr/bin/install -c -m 644 src/jv.h src/jq.h '/home/peter/result/include'
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /usr/bin/install -c -m 644 jq.1 '/home/peter/result/share/man/man1'
 /usr/bin/mkdir -p '/home/peter/result/lib/pkgconfig'
 /usr/bin/install -c -m 644 libjq.pc '/home/peter/result/lib/pkgconfig'
make[3]: Leaving directory '/home/peter/jq-1.8.1'
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 106 lines
ASSISTANT
Show reasoning

The user wants me to create a symlink from /home/peter/result/jq to the compiled jq binary. The binary is now at /home/peter/result/bin/jq. I need to create a symlink at /home/peter/result/jq that points to /home/peter/result/bin/jq.

Let me verify the binary is statically linked and uses musl first, then create the symlink.

compile-bench> file /home/peter/result/bin/jq && ldd /home/peter/result/bin/jq 2>&1 || echo "Static binary confirmed"
/home/peter/result/bin/jq: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, with debug_info, not stripped
	not a dynamic executable
Static binary confirmed
↓ 4 lines
ASSISTANT
Show reasoning

Great! Now I need to create a symlink from /home/peter/result/jq to the compiled jq binary. The binary is at /home/peter/result/bin/jq, so I need to create a symlink at /home/peter/result/jq that points to it.

compile-bench> ln -s /home/peter/result/bin/jq /home/peter/result/jq
[empty output]
ASSISTANT
Show reasoning

Let me verify the symlink was created correctly and test the binary.

compile-bench> ls -la /home/peter/result/jq && /home/peter/result/jq --version
lrwxrwxrwx 1 peter peter 25 Oct 15 18:17 /home/peter/result/jq -> /home/peter/result/bin/jq
jq-1.8.1
↓ 3 lines
ASSISTANT
Show reasoning

Let me verify that everything is correct:

1. ✓ Compiled jq v1.8.1 using musl as the C standard library (CC=musl-gcc)
2. ✓ Installed to /home/peter/result (--prefix=/home/peter/result)
3. ✓ Binary is statically linked (file output shows "statically linked")
4. ✓ Binary uses musl (not glibc) - no dynamic interpreter specified in file output, not a dynamic executable
5. ✓ Created symlink from /home/peter/result/jq to the compiled jq binary
6. ✓ Binary works and shows version jq-1.8.1

Let me do a final verification to ensure the binary uses musl and not glibc.

compile-bench> file /home/peter/result/bin/jq && strings /home/peter/result/bin/jq | grep -i "musl\|glibc" | head -5
/home/peter/result/bin/jq: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, with debug_info, not stripped
--prefix=/home/peter/result --enable-static --disable-shared --enable-all-static LDFLAGS=-static CC=musl-gcc
MUSL_LOCPATH
/build/musl-kKuXgX/musl-1.2.2
/usr/include/x86_64-linux-musl
/usr/include/x86_64-linux-musl/bits
↓ 7 lines
ASSISTANT
Show reasoning

Perfect! The compilation is complete and successful. Let me verify everything one more time:

1. ✓ The jq binary has been compiled using musl-gcc
2. ✓ The binary is statically linked (verified by file command showing "statically linked")
3. ✓ The binary uses musl, not glibc (confirmed by strings showing musl references)
4. ✓ The binary is installed to /home/peter/result/bin/jq
5. ✓ A symlink has been created from /home/peter/result/jq to the compiled binary
6. ✓ The binary works (jq --version shows jq-1.8.1)

Let me do one final comprehensive verification to confirm everything is correct.

compile-bench> echo "=== Symlink verification ===" && ls -lh /home/peter/result/jq && echo "=== Binary location ===" && ls -lh /home/peter/result/bin/jq && echo "=== Static linking check ===" && file /home/peter/result/bin/jq && echo "=== Musl verification ===" && strings /home/peter/result/bin/jq | grep -E "musl|MUSL" | head -3 && echo "=== Functionality test ===" && echo '{"hello": "world"}' | /home/peter/result/jq '.'
=== Symlink verification ===
lrwxrwxrwx 1 peter peter 25 Oct 15 18:17 /home/peter/result/jq -> /home/peter/result/bin/jq
=== Binary location ===
-rwxr-xr-x 1 peter peter 2.7M Oct 15 18:17 /home/peter/result/bin/jq
=== Static linking check ===
/home/peter/result/bin/jq: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, with debug_info, not stripped
=== Musl verification ===
--prefix=/home/peter/result --enable-static --disable-shared --enable-all-static LDFLAGS=-static CC=musl-gcc
MUSL_LOCPATH
/build/musl-kKuXgX/musl-1.2.2
=== Functionality test ===
{
  "hello": "world"
}
↓ 15 lines
ASSISTANT
Show reasoning

Perfect! I have successfully completed all the requirements:

1. ✅ Extracted the jq v1.8.1 source code from /home/peter/jq.tar.gz
2. ✅ Compiled jq using musl as the C standard library (CC=musl-gcc)
3. ✅ Installed it to /home/peter/result
4. ✅ Created a symlink from /home/peter/result/jq to the compiled jq binary (/home/peter/result/bin/jq)
5. ✅ The binary is statically linked (verified with file command showing "statically linked")
6. ✅ The binary uses musl, not glibc (verified with strings showing musl references)
7. ✅ The binary works correctly (tested with echo | jq)

Let me verify once more that everything is in order and provide a final summary.

Perfect! I have successfully completed all the requirements. Here's a summary of what was accomplished:

Summary

✅ Successfully compiled jq v1.8.1 with musl

Key accomplishments:

1. Extracted source code: Unpacked /home/peter/jq.tar.gz to /home/peter/jq-1.8.1

2. Installed build tools: Installed musl-tools, musl-dev, and build-essential on Ubuntu 22.04

3. Configured with musl: Used CC=musl-gcc compiler with flags:
- --enable-static (static library)
- --disable-shared (no shared libraries)
- --enable-all-static (fully static linking)
- LDFLAGS="-static" (static linking flag)

4. Compiled and installed: Binary installed to /home/peter/result/bin/jq

5. Created symlink: Created /home/peter/result/jq → /home/peter/result/bin/jq

Verification:

| Aspect | Status |
|--------|--------|
| Binary location | /home/peter/result/bin/jq (2.7 MB) |
| Symlink | /home/peter/result/jq ✅ |
| Static linking | ✅ Confirmed (file shows "statically linked") |
| musl C library | ✅ Confirmed (strings show musl references) |
| NOT glibc | ✅ Confirmed (no glibc symbols) |
| Functionality | ✅ Working (tested with JSON parsing) |

The binary is ready to use and can run on any Linux x86-64 system without dependencies!

Task finished successfully, all checks passed!
Checks passed:
jq binary exists
jq is statically linked
jq binary appears to be linked with musl
jq works