Summary
Performance
| Cost | $0.045 |
| Total elapsed time | 1m58s |
| LLM inference time | 17s |
| Command execution time | 1m41s |
| Commands executed | 7 |
All details >
| Attempt ID | 9uq1neo5gm304 | Attempt group | run-17-09-01-01 |
| Revision | fb5c74bd2fee | AWS Instance | m8i.2xlarge |
| Start time | 2025-09-17T02:21:39.150Z | End time | 2025-09-17T02:23:39.845Z |
| Task | curl-ssl | Environment | ubuntu-22.04-amd64 |
| Model |  qwen3-max | OpenRouter slug | qwen/qwen3-max |
| Temperature | 1 | Explicit prompt caching | false |
| User msg after tool call | false | Max tool calls | 70 |
| Total timeout seconds | 900 | Single command timeout | 600 |
| Cost | $0.045 | Duration | 1m58s |
| LLM inference time | 17s | Command execution time | 1m41s |
| Final context tokens | 7,089 | Total output tokens | 440 |
| Output reasoning tokens | 0 | Messages | 17 |
| Assistant messages | 8 | User messages | 1 |
| System messages | 1 | Commands executed | 7 |
Task
Task: curl-ssl
curl 8.16.0 is a command-line HTTP client.
Project link: curl.se
Task:
Compile and install curl to a specific location. Build with SSL support (TLS v1.3), brotli, zlib and zstd.
Difficulties:
Installing dependencies can be tricky.
Environment:
Ubuntu 22.04 on amd64, with internet access.
Execution log
SYSTEM
You are a package-building specialist operating a Ubuntu 22.04 bash shell via one tool: run_terminal_cmd.
The current working directory of every run_terminal_cmd is /home/peter.
Execution rules:
- Always pass non-interactive flags for any command that could prompt (e.g., -y, --yes, DEBIAN_FRONTEND=noninteractive).
- Don't include any newlines in the command.
- You can use sudo.
If you encounter any errors or issues while doing the user's request, you must fix them and continue the task.
At the end verify you did the user request correctly.
USER
You are given a curl v8.16.0 source code at /home/peter/curl.tar.gz. Please compile curl and install it to /home/peter/result. Create a symlink from /home/peter/result/curl to the actual binary. Make sure it builds with SSL support (TLS v1.3), brotli, zlib and zstd.
ASSISTANT
compile-bench> sudo apt update && sudo apt install -y build-essential libssl-dev libbrotli-dev libzstd-dev zlib1g-dev libtool autoconf automake
0% [Working]
Get:1 http://security.ubuntu.com/ubuntu jammy-security InRelease [129 kB]
0% [Waiting for headers] [1 InRelease 14.2 kB/129 kB 11%]
Hit:2 http://archive.ubuntu.com/ubuntu jammy InRelease
0% [1 InRelease 20.0 kB/129 kB 15%]
0% [Waiting for headers] [1 InRelease 40.2 kB/129 kB 31%]
Get:3 http://archive.ubuntu.com/ubuntu jammy-updates InRelease [128 kB]
0% [3 InRelease 14.2 kB/128 kB 11%] [1 InRelease 43.1 kB/129 kB 33%]
0% [3 InRelease 35.9 kB/128 kB 28%]
0% [3 InRelease 47.5 kB/128 kB 37%]
Get:4 http://security.ubuntu.com/ubuntu jammy-security/universe amd64 Packages [1274 kB]
0% [3 InRelease 96.7 kB/128 kB 76%] [4 Packages 2655 B/1274 kB 0%]
0% [Waiting for headers] [4 Packages 76.5 kB/1274 kB 6%]
0% [Waiting for headers] [4 Packages 145 kB/1274 kB 11%]
Get:5 http://archive.ubuntu.com/ubuntu jammy-backports InRelease [127 kB]
0% [5 InRelease 2588 B/127 kB 2%] [4 Packages 223 kB/1274 kB 17%]
0% [4 Packages 407 kB/1274 kB 32%]
20% [Waiting for headers] [4 Packages 602 kB/1274 kB 47%]
Get:6 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 Packages [3638 kB]
21% [6 Packages 2655 B/3638 kB 0%] [4 Packages 863 kB/1274 kB 68%]
23% [6 Packages 117 kB/3638 kB 3%]
23% [4 Packages store 0 B] [6 Packages 117 kB/3638 kB 3%]
23% [6 Packages 142 kB/3638 kB 4%] [Waiting for headers]
Get:7 http://security.ubuntu.com/ubuntu jammy-security/main amd64 Packages [3311 kB]
24% [6 Packages 259 kB/3638 kB 7%] [7 Packages 15.7 kB/3311 kB 0%]
Get:8 http://security.ubuntu.com/ubuntu jammy-security/multiverse amd64 Packages [80.3 kB]
40% [6 Packages 1134 kB/3638 kB 31%] [8 Packages 13.4 kB/80.3 kB 17%]
40% [7 Packages store 0 B] [6 Packages 1134 kB/3638 kB 31%] [8 Packages 13.4 kB
40% [7 Packages store 0 B] [6 Packages 1168 kB/3638 kB 32%] [Waiting for header
Get:9 http://security.ubuntu.com/ubuntu jammy-security/restricted amd64 Packages [5441 kB]
40% [7 Packages store 0 B] [6 Packages 1168 kB/3638 kB 32%] [9 Packages 21.2 kB
60% [6 Packages 2373 kB/3638 kB 65%] [9 Packages 4128 kB/5441 kB 76%]
60% [8 P
[command output truncated]
deb ...
Unpacking libsigsegv2:amd64 (2.13-1ubuntu3) ...
Selecting previously unselected package m4.
Preparing to unpack .../01-m4_1.4.18-5ubuntu2_amd64.deb ...
Unpacking m4 (1.4.18-5ubuntu2) ...
Selecting previously unselected package autoconf.
Preparing to unpack .../02-autoconf_2.71-2_all.deb ...
Unpacking autoconf (2.71-2) ...
Selecting previously unselected package autotools-dev.
Preparing to unpack .../03-autotools-dev_20220109.1_all.deb ...
Unpacking autotools-dev (20220109.1) ...
Selecting previously unselected package automake.
Preparing to unpack .../04-automake_1%3a1.16.5-1.3_all.deb ...
Unpacking automake (1:1.16.5-1.3) ...
Selecting previously unselected package libbrotli-dev:amd64.
Preparing to unpack .../05-libbrotli-dev_1.0.9-2build6_amd64.deb ...
Unpacking libbrotli-dev:amd64 (1.0.9-2build6) ...
Selecting previously unselected package libltdl7:amd64.
Preparing to unpack .../06-libltdl7_2.4.6-15build2_amd64.deb ...
Unpacking libltdl7:amd64 (2.4.6-15build2) ...
Selecting previously unselected package libltdl-dev:amd64.
Preparing to unpack .../07-libltdl-dev_2.4.6-15build2_amd64.deb ...
Unpacking libltdl-dev:amd64 (2.4.6-15build2) ...
Selecting previously unselected package libssl-dev:amd64.
Preparing to unpack .../08-libssl-dev_3.0.2-0ubuntu1.19_amd64.deb ...
Unpacking libssl-dev:amd64 (3.0.2-0ubuntu1.19) ...
Selecting previously unselected package libtool.
Preparing to unpack .../09-libtool_2.4.6-15build2_all.deb ...
Unpacking libtool (2.4.6-15build2) ...
Selecting previously unselected package libzstd-dev:amd64.
Preparing to unpack .../10-libzstd-dev_1.4.8+dfsg-3build1_amd64.deb ...
Unpacking libzstd-dev:amd64 (1.4.8+dfsg-3build1) ...
Selecting previously unselected package zlib1g-dev:amd64.
Preparing to unpack .../11-zlib1g-dev_1%3a1.2.11.dfsg-2ubuntu9.2_amd64.deb ...
Unpacking zlib1g-dev:amd64 (1:1.2.11.dfsg-2ubuntu9.2) ...
Setting up libzstd-dev:amd64 (1.4.8+dfsg-3build1) ...
Setting up autotools-dev (20220109.1) ...
Setting up libsigsegv2:amd64 (2.13-1ubuntu3) ...
Setting up libssl-dev:amd64 (3.0.2-0ubuntu1.19) ...
Setting up libltdl7:amd64 (2.4.6-15build2) ...
Setting up zlib1g-dev:amd64 (1:1.2.11.dfsg-2ubuntu9.2) ...
Setting up libbrotli-dev:amd64 (1.0.9-2build6) ...
Setting up libtool (2.4.6-15build2) ...
Setting up m4 (1.4.18-5ubuntu2) ...
Setting up autoconf (2.71-2) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/automake.1.gz because associated file /usr/share/man/man1/automake-1.16.1.gz (of link group automake) doesn't exist
update-alternatives: warning: skip creation of /usr/share/man/man1/aclocal.1.gz because associated file /usr/share/man/man1/aclocal-1.16.1.gz (of link group automake) doesn't exist
Setting up libltdl-dev:amd64 (2.4.6-15build2) ...
Processing triggers for libc-bin (2.35-0ubuntu3.10) ...
↓ 63 lines
compile-bench> sudo apt update && sudo apt install -y build-essential libssl-dev libbrotli-dev libzstd-dev zlib1g-dev libtool autoconf automake
0% [Working]
Get:1 http://security.ubuntu.com/ubuntu jammy-security InRelease [129 kB]
0% [Waiting for headers] [1 InRelease 14.2 kB/129 kB 11%]
Hit:2 http://archive.ubuntu.com/ubuntu jammy InRelease
0% [1 InRelease 20.0 kB/129 kB 15%]
0% [Waiting for headers] [1 InRelease 40.2 kB/129 kB 31%]
Get:3 http://archive.ubuntu.com/ubuntu jammy-updates InRelease [128 kB]
0% [3 InRelease 14.2 kB/128 kB 11%] [1 InRelease 43.1 kB/129 kB 33%]
0% [3 InRelease 35.9 kB/128 kB 28%]
0% [3 InRelease 47.5 kB/128 kB 37%]
Get:4 http://security.ubuntu.com/ubuntu jammy-security/universe amd64 Packages [1274 kB]
0% [3 InRelease 96.7 kB/128 kB 76%] [4 Packages 2655 B/1274 kB 0%]
0% [Waiting for headers] [4 Packages 76.5 kB/1274 kB 6%]
0% [Waiting for headers] [4 Packages 145 kB/1274 kB 11%]
Get:5 http://archive.ubuntu.com/ubuntu jammy-backports InRelease [127 kB]
0% [5 InRelease 2588 B/127 kB 2%] [4 Packages 223 kB/1274 kB 17%]
0% [4 Packages 407 kB/1274 kB 32%]
20% [Waiting for headers] [4 Packages 602 kB/1274 kB 47%]
Get:6 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 Packages [3638 kB]
21% [6 Packages 2655 B/3638 kB 0%] [4 Packages 863 kB/1274 kB 68%]
23% [6 Packages 117 kB/3638 kB 3%]
23% [4 Packages store 0 B] [6 Packages 117 kB/3638 kB 3%]
23% [6 Packages 142 kB/3638 kB 4%] [Waiting for headers]
Get:7 http://security.ubuntu.com/ubuntu jammy-security/main amd64 Packages [3311 kB]
24% [6 Packages 259 kB/3638 kB 7%] [7 Packages 15.7 kB/3311 kB 0%]
Get:8 http://security.ubuntu.com/ubuntu jammy-security/multiverse amd64 Packages [80.3 kB]
40% [6 Packages 1134 kB/3638 kB 31%] [8 Packages 13.4 kB/80.3 kB 17%]
40% [7 Packages store 0 B] [6 Packages 1134 kB/3638 kB 31%] [8 Packages 13.4 kB
40% [7 Packages store 0 B] [6 Packages 1168 kB/3638 kB 32%] [Waiting for header
Get:9 http://security.ubuntu.com/ubuntu jammy-security/restricted amd64 Packages [5441 kB]
40% [7 Packages store 0 B] [6 Packages 1168 kB/3638 kB 32%] [9 Packages 21.2 kB
60% [6 Packages 2373 kB/3638 kB 65%] [9 Packages 4128 kB/5441 kB 76%]
60% [8 P
[command output truncated]
deb ...
Unpacking libsigsegv2:amd64 (2.13-1ubuntu3) ...
Selecting previously unselected package m4.
Preparing to unpack .../01-m4_1.4.18-5ubuntu2_amd64.deb ...
Unpacking m4 (1.4.18-5ubuntu2) ...
Selecting previously unselected package autoconf.
Preparing to unpack .../02-autoconf_2.71-2_all.deb ...
Unpacking autoconf (2.71-2) ...
Selecting previously unselected package autotools-dev.
Preparing to unpack .../03-autotools-dev_20220109.1_all.deb ...
Unpacking autotools-dev (20220109.1) ...
Selecting previously unselected package automake.
Preparing to unpack .../04-automake_1%3a1.16.5-1.3_all.deb ...
Unpacking automake (1:1.16.5-1.3) ...
Selecting previously unselected package libbrotli-dev:amd64.
Preparing to unpack .../05-libbrotli-dev_1.0.9-2build6_amd64.deb ...
Unpacking libbrotli-dev:amd64 (1.0.9-2build6) ...
Selecting previously unselected package libltdl7:amd64.
Preparing to unpack .../06-libltdl7_2.4.6-15build2_amd64.deb ...
Unpacking libltdl7:amd64 (2.4.6-15build2) ...
Selecting previously unselected package libltdl-dev:amd64.
Preparing to unpack .../07-libltdl-dev_2.4.6-15build2_amd64.deb ...
Unpacking libltdl-dev:amd64 (2.4.6-15build2) ...
Selecting previously unselected package libssl-dev:amd64.
Preparing to unpack .../08-libssl-dev_3.0.2-0ubuntu1.19_amd64.deb ...
Unpacking libssl-dev:amd64 (3.0.2-0ubuntu1.19) ...
Selecting previously unselected package libtool.
Preparing to unpack .../09-libtool_2.4.6-15build2_all.deb ...
Unpacking libtool (2.4.6-15build2) ...
Selecting previously unselected package libzstd-dev:amd64.
Preparing to unpack .../10-libzstd-dev_1.4.8+dfsg-3build1_amd64.deb ...
Unpacking libzstd-dev:amd64 (1.4.8+dfsg-3build1) ...
Selecting previously unselected package zlib1g-dev:amd64.
Preparing to unpack .../11-zlib1g-dev_1%3a1.2.11.dfsg-2ubuntu9.2_amd64.deb ...
Unpacking zlib1g-dev:amd64 (1:1.2.11.dfsg-2ubuntu9.2) ...
Setting up libzstd-dev:amd64 (1.4.8+dfsg-3build1) ...
Setting up autotools-dev (20220109.1) ...
Setting up libsigsegv2:amd64 (2.13-1ubuntu3) ...
Setting up libssl-dev:amd64 (3.0.2-0ubuntu1.19) ...
Setting up libltdl7:amd64 (2.4.6-15build2) ...
Setting up zlib1g-dev:amd64 (1:1.2.11.dfsg-2ubuntu9.2) ...
Setting up libbrotli-dev:amd64 (1.0.9-2build6) ...
Setting up libtool (2.4.6-15build2) ...
Setting up m4 (1.4.18-5ubuntu2) ...
Setting up autoconf (2.71-2) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/automake.1.gz because associated file /usr/share/man/man1/automake-1.16.1.gz (of link group automake) doesn't exist
update-alternatives: warning: skip creation of /usr/share/man/man1/aclocal.1.gz because associated file /usr/share/man/man1/aclocal-1.16.1.gz (of link group automake) doesn't exist
Setting up libltdl-dev:amd64 (2.4.6-15build2) ...
Processing triggers for libc-bin (2.35-0ubuntu3.10) ...
ASSISTANT
compile-bench> tar -xzf curl.tar.gz -C /home/peter && cd /home/peter/curl-8.16.0 && ./buildconf && ./configure --prefix=/home/peter/result --with-ssl --with-brotli --with-zstd --with-zlib && make && make install
bash: ./buildconf: No such file or directory
ASSISTANT
compile-bench> cd /home/peter && tar -xzf curl.tar.gz && cd $(ls -d curl-*) && ./configure --prefix=/home/peter/result --with-ssl --with-brotli --with-zstd --with-zlib && make && make install checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for ar... /usr/bin/ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking how to run the C preprocessor... gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for grep that handles long lines and -e... (cached) /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking if OS is AIX (to define _ALL_SOURCE)... no
checking if _THREAD_SAFE is already defin
[command output truncated]
to support dict... yes
checking whether to support telnet... yes
checking whether to support tftp... yes
checking whether to support pop3... yes
checking whether to support imap... yes
checking whether to support smb... yes
checking whether to support smtp... yes
checking whether to support gopher... yes
checking whether to support mqtt... no
checking whether to provide built-in manual... yes
checking whether to build documentation... yes
checking whether to enable generation of C code... yes
checking whether to use libgcc... no
checking if X/Open network library is required... no
checking for gethostbyname... yes
checking whether build target is a native Windows one... (cached) no
checking for proto/bsdsocket.h... no
checking for connect in libraries... yes
checking for sys/types.h... (cached) yes
checking for monotonic clock_gettime... yes
checking for clock_gettime in libraries... no additional lib required
checking if monotonic clock_gettime works... yes
checking for sys/types.h... (cached) yes
checking for raw monotonic clock_gettime... yes
checking for pkg-config... no
checking for inflateEnd in -lz... yes
checking for zlib.h... yes
configure: found both libz and libz.h header
checking for pkg-config... no
checking for pkg-config... no
checking for BrotliDecoderDecompress in -lbrotlidec... yes
checking for brotli/decode.h... yes
checking for pkg-config... no
checking for ZSTD_createDStream in -lzstd... yes
checking for zstd.h... yes
checking whether to enable IPv6... yes
checking if struct sockaddr_in6 has sin6_scope_id member... yes
checking if argv can be written to... yes
checking if GSS-API support is requested... no
checking whether to enable Windows native SSL/TLS... no
checking whether to enable Amiga native SSL/TLS (AmiSSL v5)... no
checking for pkg-config... no
checking for HMAC_Update in -lcrypto... yes
checking for SSL_connect in -lssl... yes
checking for openssl/x509.h... yes
checking for openssl/rsa.h... yes
checking for openssl/crypto.h... yes
checking for openssl/pem.h... yes
checking for openssl/ssl.h... yes
checking for openssl/err.h... yes
checking for BoringSSL... no
checking for AWS-LC... no
checking for LibreSSL... no
checking for OpenSSL >= v3... yes
checking for SSL_set_quic_use_legacy_codepoint... no
checking for SSL_set_quic_tls_cbs... no
configure: OpenSSL version does not speak any known QUIC API
checking for SRP support in OpenSSL... yes
checking for QUIC support and OpenSSL >= 3.3... no
configure: built with one SSL backend
checking default CA cert bundle/path... configure: want unset ca /etc/ssl/certs/ca-certificates.crt
/etc/ssl/certs/ca-certificates.crt
/etc/ssl/certs (capath)
checking whether to use OpenSSL's built-in CA store... no
checking CA cert bundle path to embed in the curl tool... no
checking for pkg-config... no
checking for psl_builtin in -lpsl... no
configure: error: libpsl libs and/or directories were not found where specified!
↓ 137 lines
compile-bench> cd /home/peter && tar -xzf curl.tar.gz && cd $(ls -d curl-*) && ./configure --prefix=/home/peter/result --with-ssl --with-brotli --with-zstd --with-zlib && make && make install
checking whether to enable maintainer-specific portions of Makefiles... no checking whether make supports nested variables... yes checking whether to enable debug build options... no checking whether to enable compiler optimizer... (assumed) yes checking whether to enable strict compiler warnings... no checking whether to enable compiler warnings as errors... no checking whether to enable curl debug memory tracking... no checking whether to enable hiding of library internal symbols... yes checking whether to enable c-ares for DNS lookups... no checking whether to disable dependency on -lrt... (assumed no) checking whether to enable HTTPSRR support... no checking whether to enable ECH support... no checking whether to enable SSL session export support... no checking for path separator... : checking for sed... /usr/bin/sed checking for grep... /usr/bin/grep checking that grep -E works... yes checking for ar... /usr/bin/ar checking for a BSD-compatible install... /usr/bin/install -c checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking how to run the C preprocessor... gcc -E checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for stdatomic.h... yes checking if _Atomic is available... yes checking for a sed that does not truncate output... (cached) /usr/bin/sed checking for code coverage support... no checking whether build environment is sane... yes checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... gcc3 checking curl version... 8.16.0 checking for perl... /usr/bin/perl checking for httpd... no checking for apache2... no checking for apxs... no configure: httpd/apache2 not in PATH, http tests disabled configure: apxs not in PATH, http tests disabled checking for danted... no checking for danted... no checking for nghttpx... no checking for caddy... no checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... /usr/bin/grep -E checking if OS is AIX (to define _ALL_SOURCE)... no checking if _THREAD_SAFE is already defin [command output truncated] to support dict... yes checking whether to support telnet... yes checking whether to support tftp... yes checking whether to support pop3... yes checking whether to support imap... yes checking whether to support smb... yes checking whether to support smtp... yes checking whether to support gopher... yes checking whether to support mqtt... no checking whether to provide built-in manual... yes checking whether to build documentation... yes checking whether to enable generation of C code... yes checking whether to use libgcc... no checking if X/Open network library is required... no checking for gethostbyname... yes checking whether build target is a native Windows one... (cached) no checking for proto/bsdsocket.h... no checking for connect in libraries... yes checking for sys/types.h... (cached) yes checking for monotonic clock_gettime... yes checking for clock_gettime in libraries... no additional lib required checking if monotonic clock_gettime works... yes checking for sys/types.h... (cached) yes checking for raw monotonic clock_gettime... yes checking for pkg-config... no checking for inflateEnd in -lz... yes checking for zlib.h... yes configure: found both libz and libz.h header checking for pkg-config... no checking for pkg-config... no checking for BrotliDecoderDecompress in -lbrotlidec... yes checking for brotli/decode.h... yes checking for pkg-config... no checking for ZSTD_createDStream in -lzstd... yes checking for zstd.h... yes checking whether to enable IPv6... yes checking if struct sockaddr_in6 has sin6_scope_id member... yes checking if argv can be written to... yes checking if GSS-API support is requested... no checking whether to enable Windows native SSL/TLS... no checking whether to enable Amiga native SSL/TLS (AmiSSL v5)... no checking for pkg-config... no checking for HMAC_Update in -lcrypto... yes checking for SSL_connect in -lssl... yes checking for openssl/x509.h... yes checking for openssl/rsa.h... yes checking for openssl/crypto.h... yes checking for openssl/pem.h... yes checking for openssl/ssl.h... yes checking for openssl/err.h... yes checking for BoringSSL... no checking for AWS-LC... no checking for LibreSSL... no checking for OpenSSL >= v3... yes checking for SSL_set_quic_use_legacy_codepoint... no checking for SSL_set_quic_tls_cbs... no configure: OpenSSL version does not speak any known QUIC API checking for SRP support in OpenSSL... yes checking for QUIC support and OpenSSL >= 3.3... no configure: built with one SSL backend checking default CA cert bundle/path... configure: want unset ca /etc/ssl/certs/ca-certificates.crt /etc/ssl/certs/ca-certificates.crt /etc/ssl/certs (capath) checking whether to use OpenSSL's built-in CA store... no checking CA cert bundle path to embed in the curl tool... no checking for pkg-config... no checking for psl_builtin in -lpsl... no configure: error: libpsl libs and/or directories were not found where specified!
ASSISTANT
compile-bench> sudo apt install -y libpsl-dev
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 3%
Reading package lists... 3%
Reading package lists... 4%
Reading package lists... 4%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 52%
Reading package lists... 52%
Reading package lists... 67%
Reading package lists... 67%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 81%
Reading package lists... 81%
Reading package lists... 96%
Reading package lists... 96%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... Done
Building dependency tree... 0%
Building dependency tree... 0%
Building dependency tree... 50%
Building dependency tree... 50%
Building dependency tree... Done
Reading state information... 0%
Reading state information... 1%
Reading state information... Done
The following NEW packages will be installed:
libpsl-dev
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 77.9 kB of archives.
After this operation, 214 kB of additional disk space will be used.
0% [Working]
Get:1 http://archive.ubuntu.com/ubuntu jammy/main amd64 libpsl-dev amd64 0.21.0-1.2build2 [77.9 kB]
6% [1 libpsl-dev 5510 B/77.9 kB 7%]
100% [Working]
Fetched 77.9 kB in 0s (170 kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package libpsl-dev:amd64.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 11304 files and directories currently installed.)
Preparing to unpack .../libpsl-dev_0.21.0-1.2build2_amd64.deb ...
Unpacking libpsl-dev:amd64 (0.21.0-1.2build2) ...
Setting up libpsl-dev:amd64 (0.21.0-1.2build2) ...
↓ 17 lines
compile-bench> sudo apt install -y libpsl-dev
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 3%
Reading package lists... 3%
Reading package lists... 4%
Reading package lists... 4%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 52%
Reading package lists... 52%
Reading package lists... 67%
Reading package lists... 67%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 81%
Reading package lists... 81%
Reading package lists... 96%
Reading package lists... 96%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... Done
Building dependency tree... 0%
Building dependency tree... 0%
Building dependency tree... 50%
Building dependency tree... 50%
Building dependency tree... Done
Reading state information... 0%
Reading state information... 1%
Reading state information... Done
The following NEW packages will be installed:
libpsl-dev
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 77.9 kB of archives.
After this operation, 214 kB of additional disk space will be used.
0% [Working]
Get:1 http://archive.ubuntu.com/ubuntu jammy/main amd64 libpsl-dev amd64 0.21.0-1.2build2 [77.9 kB]
6% [1 libpsl-dev 5510 B/77.9 kB 7%]
100% [Working]
Fetched 77.9 kB in 0s (170 kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package libpsl-dev:amd64.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 11304 files and directories currently installed.)
Preparing to unpack .../libpsl-dev_0.21.0-1.2build2_amd64.deb ...
Unpacking libpsl-dev:amd64 (0.21.0-1.2build2) ...
Setting up libpsl-dev:amd64 (0.21.0-1.2build2) ...
ASSISTANT
compile-bench> cd /home/peter && cd $(ls -d curl-*) && ./configure --prefix=/home/peter/result --with-ssl --with-brotli --with-zstd --with-zlib && make && make install checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for ar... /usr/bin/ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking how to run the C preprocessor... gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for grep that handles long lines and -e... (cached) /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking if OS is AIX (to define _ALL_SOURCE)... no
checking if _THREAD_SAFE is already defin
[command output truncated]
ng directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/home/peter/result/share/aclocal'
/usr/bin/install -c -m 644 libcurl.m4 '/home/peter/result/share/aclocal'
/usr/bin/mkdir -p '/home/peter/result/share/man/man3'
/usr/bin/install -c -m 644 curl_easy_cleanup.3 curl_easy_duphandle.3 curl_easy_escape.3 curl_easy_getinfo.3 curl_easy_header.3 curl_easy_init.3 curl_easy_nextheader.3 curl_easy_option_by_id.3 curl_easy_option_by_name.3 curl_easy_option_next.3 curl_easy_pause.3 curl_easy_perform.3 curl_easy_recv.3 curl_easy_reset.3 curl_easy_send.3 curl_easy_setopt.3 curl_easy_ssls_export.3 curl_easy_ssls_import.3 curl_easy_strerror.3 curl_easy_unescape.3 curl_easy_upkeep.3 curl_escape.3 curl_formadd.3 curl_formfree.3 curl_formget.3 curl_free.3 curl_getdate.3 curl_getenv.3 curl_global_cleanup.3 curl_global_init.3 curl_global_init_mem.3 curl_global_sslset.3 curl_global_trace.3 curl_mime_addpart.3 curl_mime_data.3 curl_mime_data_cb.3 curl_mime_encoder.3 curl_mime_filedata.3 curl_mime_filename.3 curl_mime_free.3 '/home/peter/result/share/man/man3'
/usr/bin/install -c -m 644 curl_mime_headers.3 curl_mime_init.3 curl_mime_name.3 curl_mime_subparts.3 curl_mime_type.3 curl_mprintf.3 curl_multi_add_handle.3 curl_multi_assign.3 curl_multi_cleanup.3 curl_multi_fdset.3 curl_multi_get_handles.3 curl_multi_get_offt.3 curl_multi_info_read.3 curl_multi_init.3 curl_multi_perform.3 curl_multi_poll.3 curl_multi_remove_handle.3 curl_multi_setopt.3 curl_multi_socket.3 curl_multi_socket_action.3 curl_multi_socket_all.3 curl_multi_strerror.3 curl_multi_timeout.3 curl_multi_wait.3 curl_multi_waitfds.3 curl_multi_wakeup.3 curl_pushheader_byname.3 curl_pushheader_bynum.3 curl_share_cleanup.3 curl_share_init.3 curl_share_setopt.3 curl_share_strerror.3 curl_slist_append.3 curl_slist_free_all.3 curl_strequal.3 curl_strnequal.3 curl_unescape.3 curl_url.3 curl_url_cleanup.3 curl_url_dup.3 '/home/peter/result/share/man/man3'
/usr/bin/install -c -m 644 curl_url_get.3 curl_url_set.3 curl_url_strerror.3 curl_version.3 curl_version_info.3 curl_ws_meta.3 curl_ws_recv.3 curl_ws_send.3 curl_ws_start_frame.3 libcurl-easy.3 libcurl-env-dbg.3 libcurl-env.3 libcurl-errors.3 libcurl-multi.3 libcurl-security.3 libcurl-share.3 libcurl-symbols.3 libcurl-thread.3 libcurl-tutorial.3 libcurl-url.3 libcurl-ws.3 libcurl.3 '/home/peter/result/share/man/man3'
make[6]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[4]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[3]: Leaving directory '/home/peter/curl-8.16.0'
make[2]: Leaving directory '/home/peter/curl-8.16.0'
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 86 lines
compile-bench> cd /home/peter && cd $(ls -d curl-*) && ./configure --prefix=/home/peter/result --with-ssl --with-brotli --with-zstd --with-zlib && make && make install
checking whether to enable maintainer-specific portions of Makefiles... no checking whether make supports nested variables... yes checking whether to enable debug build options... no checking whether to enable compiler optimizer... (assumed) yes checking whether to enable strict compiler warnings... no checking whether to enable compiler warnings as errors... no checking whether to enable curl debug memory tracking... no checking whether to enable hiding of library internal symbols... yes checking whether to enable c-ares for DNS lookups... no checking whether to disable dependency on -lrt... (assumed no) checking whether to enable HTTPSRR support... no checking whether to enable ECH support... no checking whether to enable SSL session export support... no checking for path separator... : checking for sed... /usr/bin/sed checking for grep... /usr/bin/grep checking that grep -E works... yes checking for ar... /usr/bin/ar checking for a BSD-compatible install... /usr/bin/install -c checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking how to run the C preprocessor... gcc -E checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for stdatomic.h... yes checking if _Atomic is available... yes checking for a sed that does not truncate output... (cached) /usr/bin/sed checking for code coverage support... no checking whether build environment is sane... yes checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... gcc3 checking curl version... 8.16.0 checking for perl... /usr/bin/perl checking for httpd... no checking for apache2... no checking for apxs... no configure: httpd/apache2 not in PATH, http tests disabled configure: apxs not in PATH, http tests disabled checking for danted... no checking for danted... no checking for nghttpx... no checking for caddy... no checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... /usr/bin/grep -E checking if OS is AIX (to define _ALL_SOURCE)... no checking if _THREAD_SAFE is already defin [command output truncated] ng directory '/home/peter/curl-8.16.0/docs/libcurl/opts' make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl/opts' make[5]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl' make[6]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl' make[6]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/home/peter/result/share/aclocal' /usr/bin/install -c -m 644 libcurl.m4 '/home/peter/result/share/aclocal' /usr/bin/mkdir -p '/home/peter/result/share/man/man3' /usr/bin/install -c -m 644 curl_easy_cleanup.3 curl_easy_duphandle.3 curl_easy_escape.3 curl_easy_getinfo.3 curl_easy_header.3 curl_easy_init.3 curl_easy_nextheader.3 curl_easy_option_by_id.3 curl_easy_option_by_name.3 curl_easy_option_next.3 curl_easy_pause.3 curl_easy_perform.3 curl_easy_recv.3 curl_easy_reset.3 curl_easy_send.3 curl_easy_setopt.3 curl_easy_ssls_export.3 curl_easy_ssls_import.3 curl_easy_strerror.3 curl_easy_unescape.3 curl_easy_upkeep.3 curl_escape.3 curl_formadd.3 curl_formfree.3 curl_formget.3 curl_free.3 curl_getdate.3 curl_getenv.3 curl_global_cleanup.3 curl_global_init.3 curl_global_init_mem.3 curl_global_sslset.3 curl_global_trace.3 curl_mime_addpart.3 curl_mime_data.3 curl_mime_data_cb.3 curl_mime_encoder.3 curl_mime_filedata.3 curl_mime_filename.3 curl_mime_free.3 '/home/peter/result/share/man/man3' /usr/bin/install -c -m 644 curl_mime_headers.3 curl_mime_init.3 curl_mime_name.3 curl_mime_subparts.3 curl_mime_type.3 curl_mprintf.3 curl_multi_add_handle.3 curl_multi_assign.3 curl_multi_cleanup.3 curl_multi_fdset.3 curl_multi_get_handles.3 curl_multi_get_offt.3 curl_multi_info_read.3 curl_multi_init.3 curl_multi_perform.3 curl_multi_poll.3 curl_multi_remove_handle.3 curl_multi_setopt.3 curl_multi_socket.3 curl_multi_socket_action.3 curl_multi_socket_all.3 curl_multi_strerror.3 curl_multi_timeout.3 curl_multi_wait.3 curl_multi_waitfds.3 curl_multi_wakeup.3 curl_pushheader_byname.3 curl_pushheader_bynum.3 curl_share_cleanup.3 curl_share_init.3 curl_share_setopt.3 curl_share_strerror.3 curl_slist_append.3 curl_slist_free_all.3 curl_strequal.3 curl_strnequal.3 curl_unescape.3 curl_url.3 curl_url_cleanup.3 curl_url_dup.3 '/home/peter/result/share/man/man3' /usr/bin/install -c -m 644 curl_url_get.3 curl_url_set.3 curl_url_strerror.3 curl_version.3 curl_version_info.3 curl_ws_meta.3 curl_ws_recv.3 curl_ws_send.3 curl_ws_start_frame.3 libcurl-easy.3 libcurl-env-dbg.3 libcurl-env.3 libcurl-errors.3 libcurl-multi.3 libcurl-security.3 libcurl-share.3 libcurl-symbols.3 libcurl-thread.3 libcurl-tutorial.3 libcurl-url.3 libcurl-ws.3 libcurl.3 '/home/peter/result/share/man/man3' make[6]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl' make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl' make[4]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl' make[3]: Leaving directory '/home/peter/curl-8.16.0' make[2]: Leaving directory '/home/peter/curl-8.16.0' make[1]: Leaving directory '/home/peter/curl-8.16.0'
ASSISTANT
compile-bench> ln -sf /home/peter/result/bin/curl /home/peter/result/curl
[empty output]
ASSISTANT
compile-bench> /home/peter/result/curl --version curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.2 zlib/1.2.11 brotli/1.0.9 zstd/1.4.8 libpsl/0.21.0
Release-Date: 2025-09-10
Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd
↓ 5 lines
compile-bench> /home/peter/result/curl --version
curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.2 zlib/1.2.11 brotli/1.0.9 zstd/1.4.8 libpsl/0.21.0 Release-Date: 2025-09-10 Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd
ASSISTANT
The curl v8.16.0 has been successfully compiled and installed to /home/peter/result with SSL (TLS v1.3), brotli, zlib, and zstd support. A symlink from /home/peter/result/curl to the actual binary has been created. The --version output confirms the required features are present.
Task finished successfully, all checks passed!
Checks passed:
curl binary exists
curl version matches expected
curl downloaded the expected local file content
curl HTTPS request to google.com returned content-type: text/html
curl TLSv1.2 connection to google.com used TLSv1.2
curl TLSv1.3 connection to google.com used TLSv1.3
curl brotli compression test passed
curl gzip compression test passed
curl version shows zstd support