Summary
Performance
Cost$0.580
Total elapsed time11m51s
LLM inference time11m10s
Command execution time41s
Commands executed63
All details >
Attempt ID 8xsbws4w35j07 Attempt group run-16-09-22-05
Revision fb5c74bd2fee AWS Instance m8i.2xlarge
Start time 2025-09-16T20:19:57.359Z End time 2025-09-16T20:31:49.257Z
Task coreutils-old-version-alpine Environment alpine-3.22.1-amd64-offline
Model gpt-5-high logo gpt-5-high OpenRouter slug openai/gpt-5
Temperature 1 Explicit prompt caching false
User msg after tool call false Max tool calls 200
Total timeout seconds 2400 Single command timeout 900
Cost $0.580 Duration 11m51s
LLM inference time 11m10s Command execution time 41s
Final context tokens 71,421 Total output tokens 19,277
Output reasoning tokens 15,232 Messages 129
Assistant messages 64 User messages 1
System messages 1 Commands executed 63
Task
Task: coreutils-old-version-alpine

GNU coreutils 5.0 (from 2003) is a collection of Linux utilities like ls, cp, mv, etc.
Project link: gnu.org/software/coreutils

Task:
Compile and install all coreutils utilities to a specific location.

Difficulties:
The source is very old (2003) and requires heavy patching. On Alpine Linux (with musl) the code requires even more patching.

Environment:
Alpine Linux 3.22.1 on amd64, without internet access.

Execution log
SYSTEM

You are a package-building specialist operating a Alpine Linux 3.22.1 bash shell via one tool: run_terminal_cmd.
The current working directory of every run_terminal_cmd is /home/peter.
Execution rules:
- Always pass non-interactive flags for any command that could prompt (e.g., -y, --yes).
- Don't include any newlines in the command.
- The environment is offline, assume you have all the necessary tools already installed.
If you encounter any errors or issues while doing the user's request, you must fix them and continue the task.
At the end verify you did the user request correctly.

USER

You are given a coreutils v5.0 source code at /home/peter/coreutils.tar.gz. Please compile the coreutils package and install it to /home/peter/result. Create symlinks for all coreutils utilities so they are available under /home/peter/result/. For example: /home/peter/result/uptime should point to the compiled uptime binary.

ASSISTANT
Show reasoning

Evaluating commands for installation

I need to work in the Alpine environment, which defaults to ash, but I'm using the bash shell for this task. I'll make sure the commands are non-interactive, like 'configure' and 'make.' Using 'make -j$(nproc)' should help with efficiency, and I need to watch out for command substitutions.

First, I'll extract the tarball with the command tar -xzf /home/peter/coreutils.tar.gz -C /home/peter. I’ll check the top-level directory of the extracted files to be sure I'm doing this correctly. Once I extract it, I can list the contents to confirm.Planning extraction and configuration

I need to create a result directory with mkdir -p /home/peter/result and then extract the tar file using tar -xzf /home/peter/coreutils.tar.gz. I suspect the directory name will be something like coreutils-5.0, so I'll check with ls -1d /home/peter/coreutils* before and after extraction.

When I change directories, I need to chain commands since my tool uses a fixed working directory. I'll use cd coreutils-5.0 && ./configure --prefix=/home/peter/result --disable-nls. Disabling NLS helps avoid gettext requirements, and since I'm in an Alpine environment, I'll also set FORCE_UNSAFE_CONFIGURE=1 to bypass root checks during configuration.Verifying installation and utilities

Next, I plan to run make -j$(nproc) followed by make install, keeping everything non-interactive. After the installation, I'll check that /home/peter/result/bin includes various utilities like ls and uptime.

I think uptime is more traditionally part of procps, not coreutils, but maybe older versions of coreutils included it. In any case, I know it’s included with procps-ng. My confusion suggests that the user's setup might have an unusual version where uptime is present, but typically it belongs to procps. We'll need to verify what's in that result directory!Checking uptime and symlink requirements

Let's clarify the timeline: uptime originated from the BSD w package and was included in procps, not in coreutils. I know for sure that uptime isn't in coreutils 8.x. The user's example might be incorrect since they require "all coreutils utilities."

I'll still create symlinks for what's installed, but I'll check if the uptime utility exists before creating a symlink for it. If it isn't there, I won't make a symlink. We’ll enumerate the installed programs in /home/peter/result/bin and create symlinks pointing to the relative path from there.Checking symlinks and installation details

I need to verify symlink naming for the g prefix in Alpine systems, where install could be overshadowed by ginstall. Historically, coreutils 5.0 used ginstall to avoid these conflicts. While the configure script can set a program prefix, I'll ensure that default names are used without an environment setting for program_prefix.

There might be issues with missing libraries on the configure step, especially due to potential warnings concerning the gets function. It’s been removed since glibc 2.28, but coreutils should compile despite this if it references an older gets implementation. I’m also setting FORCE_UNSAFE_CONFIGURE=1 since we're likely in a root environment. Finally, for symlinks, I'll need to create a script that goes through all installed files and links appropriately in the $prefix/bin directory. Let's start by checking the tar content!

compile-bench> tar -tzf /home/peter/coreutils.tar.gz | head -n 5
coreutils-5.0/
coreutils-5.0/config/
coreutils-5.0/config/ChangeLog
coreutils-5.0/config/config.guess
coreutils-5.0/config/config.rpath
6 lines
ASSISTANT
Show reasoning

Extracting directory files

I'm ready to work with the directory named 'coreutils-5.0'. It's time to extract the files now. I want to make sure everything goes smoothly during the extraction process — no hiccups! I'm just checking to see if I have the right tools in place to handle this effectively. Once it's extracted, I can move forward with whatever comes next. Let's get it done!

compile-bench> tar -xzf /home/peter/coreutils.tar.gz -C /home/peter
[empty output]
ASSISTANT
compile-bench> cd /home/peter/coreutils-5.0 && FORCE_UNSAFE_CONFIGURE=1 ./configure --prefix=/home/peter/result --disable-nls
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... no
checking for mawk... no
checking for nawk... no
checking for awk... awk
checking whether make sets $(MAKE)... yes
checking for perl5.003 or newer... no
configure: WARNING:
WARNING: You don't seem to have perl5.003 or newer installed, or you lack
         a usable version of the Perl File::Compare module.  As a result,
         you may be unable to run a few tests or to regenerate certain
         files if you modify the sources from which they are derived.
 
checking for gcc... gcc
checking for C compiler default output... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables... 
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking for egrep... grep -E
checking whether gcc needs -traditional... no
checking for ranlib... ranlib
checking whether ln -s works... yes
checking for AIX... no
checking for ANSI C header files... no
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking minix/config.h usability... no
checking minix/config.h presence... no
checking for minix/config.h... no
checking for uname... yes
checking for chroot... yes
checking for gethostid... yes
checking for strerror in -lcposix... no
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... no
checking for _LARGE_FILES value needed for large files... no
checking for gcc option to accept ANSI C... none needed
checking for function prototypes... yes
checking for ANSI C header files... (cached) no
checking for string.h... (cached) yes
checking whether byte ordering is bigendian... no
checking for an ANSI C-conforming const... yes
checking for working volatile... yes
checking for inline... inline
checking for working long double with more range or precision than double... no
checking errno.h usability... yes
checking errno.h presence... yes
checking for errno.h... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking float.h usability... yes
checking float.h presence... yes
[command output truncated]
configure: WARNING:     ## ------------------------------------ ##
checking for shadow.h... yes
checking for struct spwd.sp_pwdp... no
checking for getspnam... yes
checking for library containing crypt... none required
checking for msgfmt... no
checking for gmsgfmt... :
checking for xgettext... no
checking for msgmerge... no
checking whether NLS is requested... no
configure: creating ./config.status
config.status: creating Makefile
config.status: creating doc/Makefile
config.status: creating lib/Makefile
config.status: creating man/Makefile
config.status: creating m4/Makefile
config.status: creating po/Makefile.in
config.status: creating src/Makefile
config.status: creating tests/Makefile
config.status: creating tests/basename/Makefile
config.status: creating tests/chgrp/Makefile
config.status: creating tests/chmod/Makefile
config.status: creating tests/chown/Makefile
config.status: creating tests/cp/Makefile
config.status: creating tests/cut/Makefile
config.status: creating tests/date/Makefile
config.status: creating tests/dd/Makefile
config.status: creating tests/dircolors/Makefile
config.status: creating tests/du/Makefile
config.status: creating tests/expr/Makefile
config.status: creating tests/factor/Makefile
config.status: creating tests/fmt/Makefile
config.status: creating tests/head/Makefile
config.status: creating tests/install/Makefile
config.status: creating tests/join/Makefile
config.status: creating tests/ln/Makefile
config.status: creating tests/ls-2/Makefile
config.status: creating tests/ls/Makefile
config.status: creating tests/md5sum/Makefile
config.status: creating tests/misc/Makefile
config.status: creating tests/mkdir/Makefile
config.status: creating tests/mv/Makefile
config.status: creating tests/od/Makefile
config.status: creating tests/pr/Makefile
config.status: creating tests/rm/Makefile
config.status: creating tests/rmdir/Makefile
config.status: creating tests/seq/Makefile
config.status: creating tests/sha1sum/Makefile
config.status: creating tests/shred/Makefile
config.status: creating tests/sort/Makefile
config.status: creating tests/stty/Makefile
config.status: creating tests/sum/Makefile
config.status: creating tests/tac/Makefile
config.status: creating tests/tail-2/Makefile
config.status: creating tests/tail/Makefile
config.status: creating tests/test/Makefile
config.status: creating tests/touch/Makefile
config.status: creating tests/tr/Makefile
config.status: creating tests/tsort/Makefile
config.status: creating tests/unexpand/Makefile
config.status: creating tests/uniq/Makefile
config.status: creating tests/wc/Makefile
config.status: creating config.h
config.status: linking ./lib/fnmatch_.h to lib/fnmatch.h
config.status: linking ./lib/ftw_.h to lib/ftw.h
config.status: executing depfiles commands
config.status: executing default-1 commands
config.status: creating po/POTFILES
config.status: creating po/Makefile
141 lines
ASSISTANT
compile-bench> cd /home/peter/coreutils-5.0 && make -j$(getconf _NPROCESSORS_ONLN || echo 1) MAKEINFO=true
make  all-recursive
make[1]: Entering directory '/home/peter/coreutils-5.0'
Making all in lib
make[2]: Entering directory '/home/peter/coreutils-5.0/lib'
make  all-am
make[3]: Entering directory '/home/peter/coreutils-5.0/lib'
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -g -O2 -MT acl.o -MD -MP -MF ".deps/acl.Tpo" \
  -c -o acl.o `test -f 'acl.c' || echo './'`acl.c; \
then mv ".deps/acl.Tpo" ".deps/acl.Po"; \
else rm -f ".deps/acl.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -g -O2 -MT getdate.o -MD -MP -MF ".deps/getdate.Tpo" \
  -c -o getdate.o `test -f 'getdate.c' || echo './'`getdate.c; \
then mv ".deps/getdate.Tpo" ".deps/getdate.Po"; \
else rm -f ".deps/getdate.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -g -O2 -MT posixtm.o -MD -MP -MF ".deps/posixtm.Tpo" \
  -c -o posixtm.o `test -f 'posixtm.c' || echo './'`posixtm.c; \
then mv ".deps/posixtm.Tpo" ".deps/posixtm.Po"; \
else rm -f ".deps/posixtm.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -g -O2 -MT posixver.o -MD -MP -MF ".deps/posixver.Tpo" \
  -c -o posixver.o `test -f 'posixver.c' || echo './'`posixver.c; \
then mv ".deps/posixver.Tpo" ".deps/posixver.Po"; \
else rm -f ".deps/posixver.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -g -O2 -MT strftime.o -MD -MP -MF ".deps/strftime.Tpo" \
  -c -o strftime.o `test -f 'strftime.c' || echo './'`strftime.c; \
then mv ".deps/strftime.Tpo" ".deps/strftime.Po"; \
else rm -f ".deps/strftime.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -g -O2 -MT getopt.o -MD -MP -MF ".deps/getopt.Tpo" \
  -c -o getopt.o `test -f 'getopt.c' || echo './'`getopt.c; \
then mv ".deps/getopt.Tpo" ".deps/getopt.Po"; \
else rm -f ".deps/getopt.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -g -O2 -MT getopt1.o -MD -MP -MF ".deps/getopt1.Tpo" \
  -c -o getopt1.o `test -f 'getopt1.c' || echo './'`getopt1.c; \
then mv ".deps/getopt1.Tpo" ".deps/getopt1.Po"; \
else rm -f ".deps/getopt1.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -g -O2 -MT hash.o -MD -MP -MF ".deps/hash.Tpo" \
  -c -o hash.o `test -f 'hash.c' || echo './'`hash.c; \
then mv ".deps/hash.Tpo" ".deps/hash.Po"; \
else rm -f ".deps/hash.Tpo"; exit 1; \
fi
In file included from acl.c:22:
../config.h:1359:15: error: duplicate 'unsigned'
 1359 | #define ino_t unsigned long
      |               ^~~~~~~~
In file included from strftime.c:22:
../config.h:1359:15: error: duplicate 'unsigned'
 1359 | #define ino_t unsigned long
      |               ^~~~~~~~
make[3]: *** [Makefile:590: acl.o] Error 1
make[3]: *** Waiting for unfinished jobs....
In file included from /usr/include/fortify/stdlib.h:33,
                 from posixver.c:28:
/usr/include/fortify/unistd.h:75:1: error: 'getgroups' undeclared here (not in a function); did you mean 'setgroups'?
   75 | _FORTIFY_FN(getgroups) int getgroups(int __l, gid_t * _FORTIFY_POS0 __s)
      | ^~~~~~~~~~~
In file included from posixver.c:34:
/usr/include/fortify/unistd.h: In function 'getgroups':
/usr/include/fortify/unistd.h:81:16: error: called object '__orig_getgroups' is not a function or function pointer
   81 |         return __orig_getgroups(__l, __s);
      |                ^~~~~~~~~~~~~~~~
/usr/include/fortify/unistd.h:75:1: note: declared here
   75 | _FORTIFY_FN(getgroups) int getgroups(int __l, gid_t * _FORTIFY_POS0 __s)
      | ^~~~~~~~~~~
In file included from posixtm.c:22:
../config.h:1359:15: error: duplicate 'unsigned'
 1359 | #define ino_t unsigned long
      |               ^~~~~~~~
make[3]: *** [Makefile:590: posixver.o] Error 1
In file included from getdate.h:18,
                 from getdate.y:449:
../config.h:1359:15: error: duplicate 'unsigned'
 1359 | #define ino_t unsigned long
      |               ^~~~~~~~
make[3]: *** [Makefile:590: posixtm.o] Error 1
make[3]: *** [Makefile:590: strftime.o] Error 1
make[3]: *** [Makefile:590: getdate.o] Error 1
make[3]: Leaving directory '/home/peter/coreutils-5.0/lib'
make[2]: *** [Makefile:414: all] Error 2
make[2]: Leaving directory '/home/peter/coreutils-5.0/lib'
make[1]: *** [Makefile:244: all-recursive] Error 1
make[1]: Leaving directory '/home/peter/coreutils-5.0'
make: *** [Makefile:199: all] Error 2
89 lines
ASSISTANT
compile-bench> cd /home/peter/coreutils-5.0 && make distclean
Making distclean in tests
make[1]: Entering directory '/home/peter/coreutils-5.0/tests'
Making distclean in wc
make[2]: Entering directory '/home/peter/coreutils-5.0/tests/wc'
test -z "a0.O a0.E a1.O a1.E a2.O a2.E a3.O a3.E a4.O a4.E a5.O a5.E a6.O a6.E a7.O a7.E a8.O a8.E a9.O a9.E b0.O b0.E b1.O b1.E c0.O c0.E c1.O c1.E c2.O c2.E" || rm -f a0.O a0.E a1.O a1.E a2.O a2.E a3.O a3.E a4.O a4.E a5.O a5.E a6.O a6.E a7.O a7.E a8.O a8.E a9.O a9.E b0.O b0.E b1.O b1.E c0.O c0.E c1.O c1.E c2.O c2.E
rm -f Makefile 
make[2]: Leaving directory '/home/peter/coreutils-5.0/tests/wc'
Making distclean in uniq
make[2]: Entering directory '/home/peter/coreutils-5.0/tests/uniq'
test -z "1.O 1.E 2.O 2.E 3.O 3.E 4.O 4.E 5.O 5.E 6.O 6.E 7.O 7.E 8.O 8.E 9.O 9.E 10.O 10.E 11.O 11.E 12.O 12.E 13.O 13.E 20.O 20.E 21.O 21.E 22.O 22.E 23.O 23.E obs30.O obs30.E 31.O 31.E 32.O 32.E 33.O 33.E 34.O 34.E 35.O 35.E obs40.O obs40.E obs41.O obs41.E 42.O 42.E 43.O 43.E obs44.O obs44.E obs45.O obs45.E 50.O 50.E 51.O 51.E 52.O 52.E 53.O 53.E 54.O 54.E 55.O 55.E 56.O 56.E 57.O 57.E 60.O 60.E 61.O 61.E 62.O 62.E 63.O 63.E 64.O 64.E 65.O 65.E 90.O 90.E 91.O 91.E 92.O 92.E 93.O 93.E 94.O 94.E 101.O 101.E 102.O 102.E 110.O 110.E 111.O 111.E 112.O 112.E 113.O 113.E 114.O 114.E 115.O 115.E 116.O 116.E 117.O 117.E 118.O 118.E 119.O 119.E" || rm -f 1.O 1.E 2.O 2.E 3.O 3.E 4.O 4.E 5.O 5.E 6.O 6.E 7.O 7.E 8.O 8.E 9.O 9.E 10.O 10.E 11.O 11.E 12.O 12.E 13.O 13.E 20.O 20.E 21.O 21.E 22.O 22.E 23.O 23.E obs30.O obs30.E 31.O 31.E 32.O 32.E 33.O 33.E 34.O 34.E 35.O 35.E obs40.O obs40.E obs41.O obs41.E 42.O 42.E 43.O 43.E obs44.O obs44.E obs45.O obs45.E 50.O 50.E 51.O 51.E 52.O 52.E 53.O 53.E 54.O 54.E 55.O 55.E 56.O 56.E 57.O 57.E 60.O 60.E 61.O 61.E 62.O 62.E 63.O 63.E 64.O 64.E 65.O 65.E 90.O 90.E 91.O 91.E 92.O 92.E 93.O 93.E 94.O 94.E 101.O 101.E 102.O 102.E 110.O 110.E 111.O 111.E 112.O 112.E 113.O 113.E 114.O 114.E 115.O 115.E 116.O 116.E 117.O 117.E 118.O 118.E 119.O 119.E
rm -f Makefile 
make[2]: Leaving directory '/home/peter/coreutils-5.0/tests/uniq'
Making distclean in unexpand
make[2]: Entering directory '/home/peter/coreutils-5.0/tests/unexpand'
rm -f Makefile 
make[2]: Leaving directory '/home/peter/coreutils-5.0/tests/unexpand'
Making distclean in tsort
make[2]: Entering directory '/home/peter/coreutils-5.0/tests/tsort'
rm -f Makefile 
make[2]: Leaving directory '/home/peter/coreutils-5.0/tests/tsort'
Making distclean in tr
make[2]: Entering directory '/home/peter/coreutils-5.0/tests/tr'
test -z "1.O 1.E 2.O 2.E 3.O 3.E 4.O 4.E 5.O 5.E 6.O 6.E 7.O 7.E 8.O 8.E 9.O 9.E a.O a.E b.O b.E c.O c.E d.O d.E e.O e.E f.O f.E g.O g.E h.O h.E i.O i.E j.O j.E k.O k.E l.O l.E m.O m.E n.O n.E o.O o.E p.O p.E q.O q.E r.O r.E s.O s.E t.O t.E u.O u.E v.O v.E w.O w.E x.O x.E y.O y.E z.O z.E range-a-a.O range-a-a.E null.O null.E upcase.O upcase.E dncase.O dncase.E rep-cclass.O rep-cclass.E rep-1.O rep-1.E rep-2.O rep-2.E rep-3.O rep-3.E o-rep-1.O o-rep-1.E o-rep-2.O o-rep-2.E esc.O esc.
[command output truncated]
m -f Makefile 
make[1]: Leaving directory '/home/peter/coreutils-5.0/man'
Making distclean in doc
make[1]: Entering directory '/home/peter/coreutils-5.0/doc'
rm -f coreutils.aux coreutils.cp coreutils.cps coreutils.fl coreutils.fn \
  coreutils.ky coreutils.log coreutils.op coreutils.pg \
  coreutils.tmp coreutils.toc coreutils.tp coreutils.tps \
  coreutils.vr coreutils.dvi coreutils.pdf coreutils.ps
rm -f vti.tmp
rm -f Makefile 
make[1]: Leaving directory '/home/peter/coreutils-5.0/doc'
Making distclean in src
make[1]: Entering directory '/home/peter/coreutils-5.0/src'
test -z "chgrp chown chmod cp dd dircolors du ginstall link ln dir vdir ls mkdir mkfifo mknod mv readlink rm rmdir shred stat sync touch unlink cat cksum comm csplit cut expand fmt fold head join md5sum nl od paste pr ptx sha1sum sort split sum tac tail tr tsort unexpand uniq wc basename date dirname echo env expr factor false hostname id kill logname pathchk printenv printf pwd seq sleep tee test true tty whoami yes  uname chroot hostid nice pinky users who " || rm -f chgrp chown chmod cp dd dircolors du ginstall link ln dir vdir ls mkdir mkfifo mknod mv readlink rm rmdir shred stat sync touch unlink cat cksum comm csplit cut expand fmt fold head join md5sum nl od paste pr ptx sha1sum sort split sum tac tail tr tsort unexpand uniq wc basename date dirname echo env expr factor false hostname id kill logname pathchk printenv printf pwd seq sleep tee test true tty whoami yes  uname chroot hostid nice pinky users who  > /dev/null 2>&1 || /bin/rm -f chgrp chown chmod cp dd dircolors du ginstall link ln dir vdir ls mkdir mkfifo mknod mv readlink rm rmdir shred stat sync touch unlink cat cksum comm csplit cut expand fmt fold head join md5sum nl od paste pr ptx sha1sum sort split sum tac tail tr tsort unexpand uniq wc basename date dirname echo env expr factor false hostname id kill logname pathchk printenv printf pwd seq sleep tee test true tty whoami yes  uname chroot hostid nice pinky users who 
test -z "groups  nohup su" || rm -f groups  nohup su
rm -f *.o core *.core
rm -f *.tab.c
rm -rf ./.deps
rm -f Makefile 
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
make[1]: Leaving directory '/home/peter/coreutils-5.0/src'
Making distclean in lib
make[1]: Entering directory '/home/peter/coreutils-5.0/lib'
test -z "charset.alias ref-add.sed ref-del.sed" || rm -f charset.alias ref-add.sed ref-del.sed
test -z "libfetish.a" || rm -f libfetish.a
rm -f *.o core *.core
rm -f *.tab.c
rm -rf .deps ./.deps
rm -f Makefile 
test -z "ftw.h search.h fnmatch.h" || rm -f ftw.h search.h fnmatch.h
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
make[1]: Leaving directory '/home/peter/coreutils-5.0/lib'
Making distclean in .
make[1]: Entering directory '/home/peter/coreutils-5.0'
rm -f Makefile 
rm -f config.h stamp-h1
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
make[1]: Leaving directory '/home/peter/coreutils-5.0'
rm -f config.status config.cache config.log configure.lineno
64 lines
ASSISTANT
compile-bench> cd /home/peter/coreutils-5.0 && FORCE_UNSAFE_CONFIGURE=1 ac_cv_header_stdc=yes ac_cv_type_ino_t=yes CFLAGS="-O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0" ./configure --prefix=/home/peter/result --disable-nls
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... no
checking for mawk... no
checking for nawk... no
checking for awk... awk
checking whether make sets $(MAKE)... yes
checking for perl5.003 or newer... no
configure: WARNING:
WARNING: You don't seem to have perl5.003 or newer installed, or you lack
         a usable version of the Perl File::Compare module.  As a result,
         you may be unable to run a few tests or to regenerate certain
         files if you modify the sources from which they are derived.
 
checking for gcc... gcc
checking for C compiler default output... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables... 
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking for egrep... grep -E
checking whether gcc needs -traditional... no
checking for ranlib... ranlib
checking whether ln -s works... yes
checking for AIX... no
checking for ANSI C header files... (cached) yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking minix/config.h usability... no
checking minix/config.h presence... no
checking for minix/config.h... no
checking for uname... yes
checking for chroot... yes
checking for gethostid... yes
checking for strerror in -lcposix... no
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... no
checking for _LARGE_FILES value needed for large files... no
checking for gcc option to accept ANSI C... none needed
checking for function prototypes... yes
checking for ANSI C header files... (cached) yes
checking for string.h... (cached) yes
checking whether byte ordering is bigendian... no
checking for an ANSI C-conforming const... yes
checking for working volatile... yes
checking for inline... inline
checking for working long double with more range or precision than double... no
checking errno.h usability... yes
checking errno.h presence... yes
checking for errno.h... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking float.h usability... yes
checking float.h presence... yes
[command output truncated]
checking shadow.h presence... yes
checking for shadow.h... yes
checking for struct spwd.sp_pwdp... yes
checking for getspnam... yes
checking for library containing crypt... none required
checking for msgfmt... no
checking for gmsgfmt... :
checking for xgettext... no
checking for msgmerge... no
checking whether NLS is requested... no
configure: creating ./config.status
config.status: creating Makefile
config.status: creating doc/Makefile
config.status: creating lib/Makefile
config.status: creating man/Makefile
config.status: creating m4/Makefile
config.status: creating po/Makefile.in
config.status: creating src/Makefile
config.status: creating tests/Makefile
config.status: creating tests/basename/Makefile
config.status: creating tests/chgrp/Makefile
config.status: creating tests/chmod/Makefile
config.status: creating tests/chown/Makefile
config.status: creating tests/cp/Makefile
config.status: creating tests/cut/Makefile
config.status: creating tests/date/Makefile
config.status: creating tests/dd/Makefile
config.status: creating tests/dircolors/Makefile
config.status: creating tests/du/Makefile
config.status: creating tests/expr/Makefile
config.status: creating tests/factor/Makefile
config.status: creating tests/fmt/Makefile
config.status: creating tests/head/Makefile
config.status: creating tests/install/Makefile
config.status: creating tests/join/Makefile
config.status: creating tests/ln/Makefile
config.status: creating tests/ls-2/Makefile
config.status: creating tests/ls/Makefile
config.status: creating tests/md5sum/Makefile
config.status: creating tests/misc/Makefile
config.status: creating tests/mkdir/Makefile
config.status: creating tests/mv/Makefile
config.status: creating tests/od/Makefile
config.status: creating tests/pr/Makefile
config.status: creating tests/rm/Makefile
config.status: creating tests/rmdir/Makefile
config.status: creating tests/seq/Makefile
config.status: creating tests/sha1sum/Makefile
config.status: creating tests/shred/Makefile
config.status: creating tests/sort/Makefile
config.status: creating tests/stty/Makefile
config.status: creating tests/sum/Makefile
config.status: creating tests/tac/Makefile
config.status: creating tests/tail-2/Makefile
config.status: creating tests/tail/Makefile
config.status: creating tests/test/Makefile
config.status: creating tests/touch/Makefile
config.status: creating tests/tr/Makefile
config.status: creating tests/tsort/Makefile
config.status: creating tests/unexpand/Makefile
config.status: creating tests/uniq/Makefile
config.status: creating tests/wc/Makefile
config.status: creating config.h
config.status: linking ./lib/fnmatch_.h to lib/fnmatch.h
config.status: linking ./lib/ftw_.h to lib/ftw.h
config.status: executing depfiles commands
config.status: executing default-1 commands
config.status: creating po/POTFILES
config.status: creating po/Makefile
141 lines
ASSISTANT
compile-bench> cd /home/peter/coreutils-5.0 && make -j$(getconf _NPROCESSORS_ONLN || echo 1) MAKEINFO=true CFLAGS="-O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0"
make  all-recursive
make[1]: Entering directory '/home/peter/coreutils-5.0'
Making all in lib
make[2]: Entering directory '/home/peter/coreutils-5.0/lib'
make  all-am
make[3]: Entering directory '/home/peter/coreutils-5.0/lib'
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -MT acl.o -MD -MP -MF ".deps/acl.Tpo" \
  -c -o acl.o `test -f 'acl.c' || echo './'`acl.c; \
then mv ".deps/acl.Tpo" ".deps/acl.Po"; \
else rm -f ".deps/acl.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -MT getdate.o -MD -MP -MF ".deps/getdate.Tpo" \
  -c -o getdate.o `test -f 'getdate.c' || echo './'`getdate.c; \
then mv ".deps/getdate.Tpo" ".deps/getdate.Po"; \
else rm -f ".deps/getdate.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -MT posixtm.o -MD -MP -MF ".deps/posixtm.Tpo" \
  -c -o posixtm.o `test -f 'posixtm.c' || echo './'`posixtm.c; \
then mv ".deps/posixtm.Tpo" ".deps/posixtm.Po"; \
else rm -f ".deps/posixtm.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -MT posixver.o -MD -MP -MF ".deps/posixver.Tpo" \
  -c -o posixver.o `test -f 'posixver.c' || echo './'`posixver.c; \
then mv ".deps/posixver.Tpo" ".deps/posixver.Po"; \
else rm -f ".deps/posixver.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -MT strftime.o -MD -MP -MF ".deps/strftime.Tpo" \
  -c -o strftime.o `test -f 'strftime.c' || echo './'`strftime.c; \
then mv ".deps/strftime.Tpo" ".deps/strftime.Po"; \
else rm -f ".deps/strftime.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -MT getopt.o -MD -MP -MF ".deps/getopt.Tpo" \
  -c -o getopt.o `test -f 'getopt.c' || echo './'`getopt.c; \
then mv ".deps/getopt.Tpo" ".deps/getopt.Po"; \
else rm -f ".deps/getopt.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -MT getopt1.o -MD -MP -MF ".deps/getopt1.Tpo" \
  -c -o getopt1.o `test -f 'getopt1.c' || echo './'`getopt1.c; \
then mv ".deps/getopt1.Tpo" ".deps/getopt1.Po"; \
else rm -f ".deps/getopt1.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -MT hash.o -MD -MP -MF ".deps/hash.Tpo" \
  -c -o hash.o `test -f 'hash.c' || echo './'`hash.c; \
then mv ".deps/hash.Tpo" ".deps/hash.Po"; \
else rm -f ".deps/hash.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOUR
[command output truncated]
\
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -MT putenv.o -MD -MP -MF ".deps/putenv.Tpo" \
  -c -o putenv.o `test -f 'putenv.c' || echo './'`putenv.c; \
then mv ".deps/putenv.Tpo" ".deps/putenv.Po"; \
else rm -f ".deps/putenv.Tpo"; exit 1; \
fi
putenv.c:34:7: warning: conflicting types for built-in function 'malloc'; expected 'void *(long unsigned int)' [ttps://gcc.gnu.org/onlinedocs/gcc-14.2.0/gcc/Warning-Options.html#index-Wbuiltin-declaration-mismatch-Wbuiltin-declaration-mismatch]8;;]
   34 | char *malloc ();
      |       ^~~~~~
putenv.c:29:1: note: 'malloc' is declared in header '<stdlib.h>'
   28 | #include <errno.h>
  +++ |+#include <stdlib.h>
   29 | 
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -MT error.o -MD -MP -MF ".deps/error.Tpo" \
  -c -o error.o `test -f 'error.c' || echo './'`error.c; \
then mv ".deps/error.Tpo" ".deps/error.Po"; \
else rm -f ".deps/error.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -MT getgroups.o -MD -MP -MF ".deps/getgroups.Tpo" \
  -c -o getgroups.o `test -f 'getgroups.c' || echo './'`getgroups.c; \
then mv ".deps/getgroups.Tpo" ".deps/getgroups.Po"; \
else rm -f ".deps/getgroups.Tpo"; exit 1; \
fi
getgroups.c: In function 'rpl_getgroups':
getgroups.c:40:12: error: implicit declaration of function 'getgroups'; did you mean 'rpl_getgroups'? [ttps://gcc.gnu.org/onlinedocs/gcc-14.2.0/gcc/Warning-Options.html#index-Wimplicit-function-declaration-Wimplicit-function-declaration]8;;]
   40 |     return getgroups (n, group);
      |            ^~~~~~~~~
      |            rpl_getgroups
getgroups.c:53:3: error: implicit declaration of function 'free' [ttps://gcc.gnu.org/onlinedocs/gcc-14.2.0/gcc/Warning-Options.html#index-Wimplicit-function-declaration-Wimplicit-function-declaration]8;;]
   53 |   free (gbuf);
      |   ^~~~
getgroups.c:25:1: note: include '<stdlib.h>' or provide a declaration of 'free'
   24 | #include "xalloc.h"
  +++ |+#include <stdlib.h>
   25 | 
getgroups.c:53:3: warning: incompatible implicit declaration of built-in function 'free' [ttps://gcc.gnu.org/onlinedocs/gcc-14.2.0/gcc/Warning-Options.html#index-Wbuiltin-declaration-mismatch-Wbuiltin-declaration-mismatch]8;;]
   53 |   free (gbuf);
      |   ^~~~
getgroups.c:53:3: note: include '<stdlib.h>' or provide a declaration of 'free'
make[3]: *** [Makefile:590: getgroups.o] Error 1
make[3]: *** Waiting for unfinished jobs....
make[3]: Leaving directory '/home/peter/coreutils-5.0/lib'
make[2]: *** [Makefile:414: all] Error 2
make[2]: Leaving directory '/home/peter/coreutils-5.0/lib'
make[1]: *** [Makefile:244: all-recursive] Error 1
make[1]: Leaving directory '/home/peter/coreutils-5.0'
make: *** [Makefile:199: all] Error 2
97 lines
ASSISTANT
Show reasoning

Examining getgroups in autoconf

I'm looking into the autoconf macro 'AC_CHECK_FUNCS(getgroups)', which sets the 'ac_cv_func_getgroups' variable. It seems that gnulib uses a more comprehensive 'AC_FUNC_GETGROUPS', including runtime tests. This older autoconf version has a caching variable that might be 'ac_cv_func_getgroups_works'. If I set 'ac_cv_func_getgroups_works=yes', it avoids compiling lib/getgroups.c, bypassing the compile errors that arise there. I’ll check the 'configure' script for references to 'getgroups' by grep.

compile-bench> grep -n "getgroups" -n /home/peter/coreutils-5.0/configure | head -n 20
6257:echo "$as_me:$LINENO: checking type of array argument to getgroups" >&5
6258:echo $ECHO_N "checking type of array argument to getgroups... $ECHO_C" >&6
6259:if test "${ac_cv_type_getgroups+set}" = set; then
6263:  ac_cv_type_getgroups=cross
6287:  n = getgroups (sizeof (gidset) / MAX (sizeof (int), sizeof (gid_t)) - 1,
6289:  /* Exit non-zero if getgroups seems to require an array of ints.  This
6290:     happens when gid_t is short but getgroups modifies an array of ints.  */
6305:  ac_cv_type_getgroups=gid_t
6312:ac_cv_type_getgroups=int
6316:if test $ac_cv_type_getgroups = cross; then
6327:  $EGREP "getgroups.*int.*gid_t" >/dev/null 2>&1; then
6328:  ac_cv_type_getgroups=gid_t
6330:  ac_cv_type_getgroups=int
6336:echo "$as_me:$LINENO: result: $ac_cv_type_getgroups" >&5
6337:echo "${ECHO_T}$ac_cv_type_getgroups" >&6
6340:#define GETGROUPS_T $ac_cv_type_getgroups
26148:echo "$as_me:$LINENO: checking for getgroups" >&5
26149:echo $ECHO_N "checking for getgroups... $ECHO_C" >&6
26150:if test "${ac_cv_func_getgroups+set}" = set; then
26160:    which can conflict with char getgroups (); below.
21 lines
ASSISTANT
Show reasoning

Searching for compilation issues

I need to continue looking around line 26150 to check if they compile lib/getgroups and see if it's absent. This might involve digging a bit into the specifics of the code. I’m curious whether it’s a simple fix or if it’ll lead to more complex issues. I have to ensure that I’m thorough in this check, as missing something could mean problems down the line. Let’s see what I can find!

compile-bench> sed -n '26140,26220p' /home/peter/coreutils-5.0/configure
  if test "$gt_cv_inttypes_pri_broken" = yes; then

cat >>confdefs.h <<_ACEOF
#define PRI_MACROS_BROKEN 1
_ACEOF

  fi

echo "$as_me:$LINENO: checking for getgroups" >&5
echo $ECHO_N "checking for getgroups... $ECHO_C" >&6
if test "${ac_cv_func_getgroups+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char getgroups (); below.
    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
    <limits.h> exists even on freestanding compilers.  */
#ifdef __STDC__
# include <limits.h>
#else
# include <assert.h>
#endif
/* Override any gcc2 internal prototype to avoid an error.  */
#ifdef __cplusplus
extern "C"
{
#endif
/* We use char because int might match the return type of a gcc2
   builtin and then its argument prototype would still apply.  */
char getgroups ();
/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_getgroups) || defined (__stub___getgroups)
choke me
#else
char (*f) () = getgroups;
#endif
#ifdef __cplusplus
}
#endif

int
main ()
{
return f != getgroups;
  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest$ac_exeext'
  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  ac_cv_func_getgroups=yes
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

ac_cv_func_getgroups=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
fi
echo "$as_me:$LINENO: result: $ac_cv_func_getgroups" >&5
echo "${ECHO_T}$ac_cv_func_getgroups" >&6


80 lines
ASSISTANT
Show reasoning

Searching for conditional compilation

I'm thinking about how to locate where the code in lib/getgroups.c is conditionally compiled. It sounds like an important task! I'll need to dig deeper into the code and documentation to have a clearer understanding. This could involve exploring any related files for conditional compilation directives. Let’s see what I can uncover to help clarify this part of the project. I’m looking forward to piecing it all together!

compile-bench> grep -n "getgroups.c" -n /home/peter/coreutils-5.0/ -R
/home/peter/coreutils-5.0/old/sh-utils/ChangeLog:2105:	* lib/getgroups.c (getgroups): Protoize.
/home/peter/coreutils-5.0/old/sh-utils/ChangeLog:3294:	* lib/Makefile.am (EXTRA_DIST): Add getgroups.c.
/home/peter/coreutils-5.0/old/sh-utils/ChangeLog:3337:	* lib/getgroups.c: New file.
/home/peter/coreutils-5.0/old/fileutils/ChangeLog-1997:1217:	* lib/Makefile.am (EXTRA_DIST): Add getgroups.c.
/home/peter/coreutils-5.0/old/fileutils/ChangeLog-1997:1221:	* lib/getgroups.c: New file.
/home/peter/coreutils-5.0/configure:6263:  ac_cv_type_getgroups=cross
/home/peter/coreutils-5.0/lib/ChangeLog:474:	* getgroups.c: Don't declare functions declared by xalloc.h.
/home/peter/coreutils-5.0/lib/ChangeLog:2350:	getgroups.c, gethostname.c, getopt.h, group-member.c,
/home/peter/coreutils-5.0/lib/Makefile.in:401:	getdate.c getgroups.c gethostname.c getline.c getloadavg.c \
/home/peter/coreutils-5.0/lib/Makefile:401:	getdate.c getgroups.c gethostname.c getline.c getloadavg.c \
11 lines
ASSISTANT
compile-bench> sed -n '1,200p' /home/peter/coreutils-5.0/lib/Makefile
# Makefile.in generated by automake 1.7.3 from Makefile.am.
# lib/Makefile.  Generated from Makefile.in by configure.

# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



# Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 Free
# Software Foundation, Inc.

srcdir = .
top_srcdir = ..

pkgdatadir = $(datadir)/coreutils
pkglibdir = $(libdir)/coreutils
pkgincludedir = $(includedir)/coreutils
top_builddir = ..

am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = ../config/install-sh -c
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
host_triplet = x86_64-unknown-linux-gnu
ACLOCAL = ${SHELL} /home/peter/coreutils-5.0/config/missing --run aclocal-1.7
ALLOCA = 
AMDEP_FALSE = #
AMDEP_TRUE = 
AMTAR = ${SHELL} /home/peter/coreutils-5.0/config/missing --run tar
AUTOCONF = ${SHELL} /home/peter/coreutils-5.0/config/missing --run autoconf
AUTOHEADER = ${SHELL} /home/peter/coreutils-5.0/config/missing --run autoheader
AUTOMAKE = ${SHELL} /home/peter/coreutils-5.0/config/missing --run automake-1.7
AWK = awk
CC = gcc
CCDEPMODE = depmode=gcc3
CFLAGS = -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0
CPP = gcc -E
CPPFLAGS = 
CYGPATH_W = echo
DEFS = -DLIBDIR=\"$(libdir)\" -DHAVE_CONFIG_H
DEPDIR = .deps
DF_PROG = df$(EXEEXT)
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = grep -E
EXEEXT = 
FESETROUND_LIBM = 
GETLOADAVG_LIBS = 
GLIBC21 = no
GMSGFMT = :
GNU_PACKAGE = GNU coreutils
HELP2MAN = ${SHELL} /home/peter/coreutils-5.0/config/missing --run help2man
[command output truncated]
build_vendor = unknown
datadir = ${prefix}/share
exec_prefix = ${prefix}
host = x86_64-unknown-linux-gnu
host_alias = 
host_cpu = x86_64
host_os = linux-gnu
host_vendor = unknown
includedir = ${prefix}/include
infodir = ${prefix}/info
install_sh = /home/peter/coreutils-5.0/config/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localstatedir = ${prefix}/var
mandir = ${prefix}/man
oldincludedir = /usr/include
prefix = /home/peter/result
program_transform_name = s,x,x,
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
sysconfdir = ${prefix}/etc
target_alias = 

noinst_LIBRARIES = libfetish.a

INCLUDES = -I.. -I$(srcdir)

libfetish_a_SOURCES = \
  acl.h acl.c \
  getdate.h getdate.y \
  posixtm.c posixtm.h \
  posixver.c posixver.h \
  strftime.c strftime.h \
  getopt.c getopt.h getopt1.c \
  hash.c hash.h \
  hash-pjw.c hash-pjw.h \
  __fpending.h \
  addext.c \
  argmatch.c argmatch.h \
  backupfile.c backupfile.h \
  basename.c \
  bumpalloc.h \
  canon-host.c \
  canonicalize.h \
  closeout.c closeout.h \
  cycle-check.c cycle-check.h \
  dev-ino.h \
  diacrit.c diacrit.h \
  dirname.c dirname.h \
  dirfd.h \
  dup-safer.c \
  euidaccess.h \
  exclude.c exclude.h \
  exitfail.c exitfail.h \
  filemode.c filemode.h \
  file-type.c file-type.h \
  fnmatch_.h \
  fopen-safer.c \
  fsusage.h \
  ftw_.h \
  full-read.c full-read.h \
  full-write.c full-write.h \
  getline.h \
  getpagesize.h \
  getstr.c getstr.h \
  gettime.c \
  gettext.h \
  getugroups.c \
  group-member.h \
141 lines
ASSISTANT
compile-bench> sed -n '200,480p' /home/peter/coreutils-5.0/lib/Makefile
  group-member.h \
  hard-locale.c hard-locale.h \
  human.c human.h \
  idcache.c \
  isdir.c \
  imaxtostr.c \
  lchown.h \
  linebuffer.c linebuffer.h \
  localcharset.c \
  long-options.c long-options.h \
  makepath.c makepath.h \
  mbswidth.c mbswidth.h \
  md5.c md5.h \
  memcasecmp.c memcasecmp.h \
  memcoll.c memcoll.h \
  modechange.c modechange.h \
  mountlist.h \
  offtostr.c \
  path-concat.c path-concat.h \
  pathmax.h \
  physmem.c physmem.h \
  quote.c quote.h \
  quotearg.c quotearg.h \
  readtokens.c readtokens.h \
  readutmp.h \
  regex.h \
  safe-read.c safe-read.h \
  safe-write.c safe-write.h \
  same.c same.h \
  save-cwd.c save-cwd.h \
  savedir.c savedir.h \
  search_.h \
  settime.c \
  sha.c sha.h \
  sig2str.h \
  stdio-safer.h \
  stripslash.c \
  strverscmp.h \
  timespec.h \
  umaxtostr.c \
  unicodeio.c unicodeio.h \
  unistd-safer.h \
  unlocked-io.h \
  userspec.c \
  version-etc.c version-etc.h \
  xalloc.h \
  xgetcwd.c xgetcwd.h \
  xgethostname.c \
  xmalloc.c \
  xmemcoll.c xmemcoll.h \
  xnanosleep.c xnanosleep.h \
  xreadlink.c xreadlink.h \
  xstrdup.c \
  xstrtod.c xstrtod.h \
  xstrtol.c xstrtol.h \
  xstrtoul.c \
  xstrtoimax.c \
  xstrtoumax.c \
  yesno.c


libfetish_a_LIBADD =  mkdir$U.o fnmatch$U.o memcmp$U.o readutmp$U.o strnlen$U.o ftw$U.o chown$U.o mktime$U.o nanosleep$U.o group-member$U.o putenv$U.o error$U.o getgroups$U.o rename$U.o mkstemp$U.o tempname$U.o canonicalize$U.o regex$U.o sig2str$U.o memcmp$U.o rpmatch$U.o gettimeofday$U.o getline$U.o obstack$U.o strtod$U.o fsusage$U.o mountlist$U.o 
libfetish_a_DEPENDENCIES = $(libfetish_a_LIBADD)

BUILT_SOURCES = getdate.c
MAINTAINERCLEANFILES = $(BUILT_SOURCES)

EXTRA_DIST = config.charset ref-add.sin ref-del.sin \
  fnmatch_loop.c inttostr.c inttostr.h

[command output truncated]

all: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) all-am

.SUFFIXES:
.SUFFIXES: .sed .sin .c .o .obj .y
$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.ac $(ACLOCAL_M4)
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnits  lib/Makefile
Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)

AR = ar

clean-noinstLIBRARIES:
	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
libfetish.a: $(libfetish_a_OBJECTS) $(libfetish_a_DEPENDENCIES) 
	-rm -f libfetish.a
	$(libfetish_a_AR) libfetish.a $(libfetish_a_OBJECTS) $(libfetish_a_LIBADD)
	$(RANLIB) libfetish.a

mostlyclean-compile:
	-rm -f *.$(OBJEXT) core *.core

distclean-compile:
	-rm -f *.tab.c

include $(DEPDIR)/__fpending.Po
include $(DEPDIR)/alloca.Po
include $(DEPDIR)/atexit.Po
include $(DEPDIR)/canonicalize.Po
include $(DEPDIR)/chown.Po
include $(DEPDIR)/dirfd.Po
include $(DEPDIR)/dup2.Po
include $(DEPDIR)/error.Po
include $(DEPDIR)/euidaccess.Po
include $(DEPDIR)/fchdir-stub.Po
include $(DEPDIR)/fchown-stub.Po
include $(DEPDIR)/fileblocks.Po
include $(DEPDIR)/fnmatch.Po
include $(DEPDIR)/fsusage.Po
include $(DEPDIR)/ftruncate.Po
include $(DEPDIR)/ftw.Po
include $(DEPDIR)/getcwd.Po
include $(DEPDIR)/getgroups.Po
include $(DEPDIR)/gethostname.Po
include $(DEPDIR)/getline.Po
include $(DEPDIR)/getloadavg.Po
include $(DEPDIR)/getpass.Po
include $(DEPDIR)/gettimeofday.Po
include $(DEPDIR)/getusershell.Po
include $(DEPDIR)/group-member.Po
include $(DEPDIR)/lchown.Po
include $(DEPDIR)/lstat-stub.Po
include $(DEPDIR)/lstat.Po
include $(DEPDIR)/malloc.Po
include $(DEPDIR)/memchr.Po
include $(DEPDIR)/memcmp.Po
include $(DEPDIR)/memcpy.Po
include $(DEPDIR)/memmove.Po
include $(DEPDIR)/memrchr.Po
include $(DEPDIR)/memset.Po
include $(DEPDIR)/mkdir.Po
include $(DEPDIR)/mkstemp.Po
include $(DEPDIR)/mktime.Po
include $(DEPDIR)/mountlist.Po
include $(DEPDIR)/nanosleep.Po
include $(DEPDIR)/obstack.Po
include $(DEPDIR)/putenv.Po
141 lines
ASSISTANT
compile-bench> sed -n '1,200p' /home/peter/coreutils-5.0/lib/getgroups.c
/* provide consistent interface to getgroups for systems that don't allow N==0
   Copyright (C) 1996, 1999 Free Software Foundation, Inc.

   This program is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 2, or (at your option)
   any later version.

   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with this program; if not, write to the Free Software Foundation,
   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */

/* written by Jim Meyering */

#include <config.h>
#include <stdio.h>
#include <sys/types.h>

#include "xalloc.h"

/* On at least Ultrix 4.3 and NextStep 3.2, getgroups (0, 0) always fails.
   On other systems, it returns the number of supplemental groups for the
   process.  This function handles that special case and lets the system-
   provided function handle all others. */

int
getgroups (size_t n, GETGROUPS_T *group)
{
  int n_groups;
  GETGROUPS_T *gbuf;

#undef getgroups

  if (n != 0)
    return getgroups (n, group);

  n = 20;
  gbuf = NULL;
  while (1)
    {
      gbuf = (GETGROUPS_T *) xrealloc (gbuf, n * sizeof (GETGROUPS_T));
      n_groups = getgroups (n, gbuf);
      if (n_groups < n)
	break;
      n += 10;
    }

  free (gbuf);

  return n_groups;
}
57 lines
ASSISTANT
Show reasoning

Modifying include files

I've noticed that the call to 'getgroups' needs the correct headers included; without 'unistd.h', the compiler flags an implicit declaration error. So, I need to add '#include ' and also '#include ' for the 'free' call. I'll modify 'lib/getgroups.c' to add these after the existing includes. My plan is to use sed to insert these lines carefully, so I'll check line numbers first to ensure I'm placing things correctly. I need to be cautious about newlines too!Handling newline restrictions

I'm grappling with how to use busybox ash and deal with newlines while using sed. I can’t actually include a newline in the command string—just escaped sequences. Since sed 'a\' requires a newline character, that complicates things. Another idea is to use perl style substitutions, but that might not always be available. I could opt for awk` to manage line output, yet fitting newline characters in the command string is tricky with those restrictions! It's challenging to stay within the guidelines.Creating patch files

I’m considering making a small patch file with echo -e, which allows newline characters. To include these, I could use $'...' quoting; this would let shell expansions occur for newlines. The instruction seems to mean that the command string itself can't have literal newlines, but that $'...' might still expand at runtime. Thankfully, I can use echo or printf to produce multi-line output easily. Alternatively, using ed with a script file is also an option, and I can generate that file using $'' style.Using sed for replacements

I'm looking at the simplest way to use sed to insert new includes in a file. My strategy is to replace a particular line with new content, but that poses a challenge since it includes \n in the sed replacement string. Different sed versions handle \n differently. I need to consider that BusyBox sed might treat \n as a literal 'n' rather than a newline. Meanwhile, GNU sed handles it more intuitively. So, I need to confirm which version I'm dealing with!Using awk for appending lines

I’m considering using awk as an alternative method to append lines based on a pattern. The idea is to include commands that add my specific includes when the pattern matches, while avoiding any complications related to newlines in the script. By using awk '1; /#include /{print "#include "; print "#include "}', I ensure that it prints each input line and the additional includes seamlessly. This way, I can create a new file that incorporates the necessary changes!

compile-bench> awk '1; /#include <sys\/types.h>/{print "#include <unistd.h>"; print "#include <stdlib.h>"}' /home/peter/coreutils-5.0/lib/getgroups.c > /home/peter/coreutils-5.0/lib/getgroups.c.new && mv /home/peter/coreutils-5.0/lib/getgroups.c.new /home/peter/coreutils-5.0/lib/getgroups.c
[empty output]
ASSISTANT
compile-bench> cd /home/peter/coreutils-5.0 && make -j$(getconf _NPROCESSORS_ONLN || echo 1) MAKEINFO=true CFLAGS="-O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0"
make  all-recursive
make[1]: Entering directory '/home/peter/coreutils-5.0'
Making all in lib
make[2]: Entering directory '/home/peter/coreutils-5.0/lib'
make  all-am
make[3]: Entering directory '/home/peter/coreutils-5.0/lib'
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -MT getgroups.o -MD -MP -MF ".deps/getgroups.Tpo" \
  -c -o getgroups.o `test -f 'getgroups.c' || echo './'`getgroups.c; \
then mv ".deps/getgroups.Tpo" ".deps/getgroups.Po"; \
else rm -f ".deps/getgroups.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -MT rename.o -MD -MP -MF ".deps/rename.Tpo" \
  -c -o rename.o `test -f 'rename.c' || echo './'`rename.c; \
then mv ".deps/rename.Tpo" ".deps/rename.Po"; \
else rm -f ".deps/rename.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -MT mkstemp.o -MD -MP -MF ".deps/mkstemp.Tpo" \
  -c -o mkstemp.o `test -f 'mkstemp.c' || echo './'`mkstemp.c; \
then mv ".deps/mkstemp.Tpo" ".deps/mkstemp.Po"; \
else rm -f ".deps/mkstemp.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -MT tempname.o -MD -MP -MF ".deps/tempname.Tpo" \
  -c -o tempname.o `test -f 'tempname.c' || echo './'`tempname.c; \
then mv ".deps/tempname.Tpo" ".deps/tempname.Po"; \
else rm -f ".deps/tempname.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -MT canonicalize.o -MD -MP -MF ".deps/canonicalize.Tpo" \
  -c -o canonicalize.o `test -f 'canonicalize.c' || echo './'`canonicalize.c; \
then mv ".deps/canonicalize.Tpo" ".deps/canonicalize.Po"; \
else rm -f ".deps/canonicalize.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -MT regex.o -MD -MP -MF ".deps/regex.Tpo" \
  -c -o regex.o `test -f 'regex.c' || echo './'`regex.c; \
then mv ".deps/regex.Tpo" ".deps/regex.Po"; \
else rm -f ".deps/regex.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -MT sig2str.o -MD -MP -MF ".deps/sig2str.Tpo" \
  -c -o sig2str.o `test -f 'sig2str.c' || echo './'`sig2str.c; \
then mv ".deps/sig2str.Tpo" ".deps/sig2str.Po"; \
else rm -f ".deps/sig2str.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -MT rpmatch.o -MD -MP -MF ".deps/rpmatch.Tpo" \
  -c -o rpmatch.o `test -f 'rpmatch.c' || echo './'`rpmatch.c; \
then mv ".deps/rpmatch.Tpo" ".deps/rpmatch.Po"; \
else rm -f ".deps/rpmatch.Tpo"; exit 1; \
fi
In file included from getgroups.c:20:
../config.h:1346:19: error: conflicting types for 'rpl_getgroups'; have 'int(size_t,  int *)' {aka 'int(long unsigned int,  int *)'}
 1346 | #define getgroups rpl_getgroups
      |                   ^~~~~~~~~~~~~
getgroups.c:34:1: note: in expansion of macro 'getgroups'
   34 | getgroups (size_t n, GETGROUPS_T *group)
      | ^~~~~~~~~
../config.h:1346:19: note: previous declaration of 'rpl_getgroups' with type 'int(int,  gid_t *)' {aka 'int(int,  unsigned int *)'}
 1346 | #define getgroups rpl_getgroups
      |                   ^~~~~~~~~~~~~
getgroups.c: In function 'rpl_getgroups':
getgroups.c:42:12: error: implicit declaration of function 'getgroups'; did you mean 'setgroups'? [ttps://gcc.gnu.org/onlinedocs/gcc-14.2.0/gcc/Warning-Options.html#index-Wimplicit-function-declaration-Wimplicit-function-declaration]8;;]
   42 |     return getgroups (n, group);
      |            ^~~~~~~~~
      |            setgroups
make[3]: *** [Makefile:590: getgroups.o] Error 1
make[3]: *** Waiting for unfinished jobs....
regex.c: In function 'regerror':
regex.c:8319:22: error: implicit declaration of function '__mempcpy'; did you mean 'mempcpy'? [ttps://gcc.gnu.org/onlinedocs/gcc-14.2.0/gcc/Warning-Options.html#index-Wimplicit-function-declaration-Wimplicit-function-declaration]8;;]
 8319 |           *((char *) __mempcpy (errbuf, msg, errbuf_size - 1)) = '\0';
      |                      ^~~~~~~~~
      |                      mempcpy
regex.c:8319:13: warning: cast to pointer from integer of different size [ttps://gcc.gnu.org/onlinedocs/gcc-14.2.0/gcc/Warning-Options.html#index-Wint-to-pointer-cast-Wint-to-pointer-cast]8;;]
 8319 |           *((char *) __mempcpy (errbuf, msg, errbuf_size - 1)) = '\0';
      |             ^
make[3]: *** [Makefile:590: regex.o] Error 1
make[3]: Leaving directory '/home/peter/coreutils-5.0/lib'
make[2]: *** [Makefile:414: all] Error 2
make[2]: Leaving directory '/home/peter/coreutils-5.0/lib'
make[1]: *** [Makefile:244: all-recursive] Error 1
make[1]: Leaving directory '/home/peter/coreutils-5.0'
make: *** [Makefile:199: all] Error 2
79 lines
ASSISTANT
compile-bench> grep -n "GETGROUPS_T" /home/peter/coreutils-5.0/config.h
67:#define GETGROUPS_T int
ASSISTANT
compile-bench> sed -n '1300,1360p' /home/peter/coreutils-5.0/config.h
   System headers sometimes define this.
   We just want to avoid a redefinition error message.  */
#ifndef _ALL_SOURCE
/* # undef _ALL_SOURCE */
#endif

/* Number of bits in a file offset, on hosts where this is settable. */
/* #undef _FILE_OFFSET_BITS */

/* Enable GNU extensions on systems that have them.  */
#ifndef _GNU_SOURCE
# define _GNU_SOURCE 1
#endif

/* Define to 1 to make fseeko visible on some hosts (e.g. glibc 2.2). */
/* #undef _LARGEFILE_SOURCE */

/* Define for large files, on AIX-style hosts. */
/* #undef _LARGE_FILES */

/* Define to 1 if on MINIX. */
/* #undef _MINIX */

/* Define to 2 if the system does not provide POSIX.1 features except with
   this defined. */
/* #undef _POSIX_1_SOURCE */

/* Define to 1 if you need to in order for `stat' and other things to work. */
/* #undef _POSIX_SOURCE */

/* Define like PROTOTYPES; this can be used by system headers. */
#define __PROTOTYPES 1

/* Define to rpl_chown if the replacement function should be used. */
#define chown rpl_chown

/* Define to empty if `const' does not conform to ANSI C. */
/* #undef const */

/* Define to rpl_fnmatch if the replacement function should be used. */
#define fnmatch rpl_fnmatch

/* Define to rpl_getcwd if the wrapper function should be used. */
/* #undef getcwd */

/* Define as rpl_getgroups if getgroups doesn't work right. */
#define getgroups rpl_getgroups

/* Define to rpl_gettimeofday if the replacement function should be used. */
#define gettimeofday rpl_gettimeofday

/* Define to `int' if <sys/types.h> doesn't define. */
/* #undef gid_t */

/* Define as `__inline' if that's what the C compiler calls it, or to nothing
   if it is not supported. */
/* #undef inline */

/* Define to `unsigned long' if <sys/types.h> does not define. */
/* #undef ino_t */

61 lines
ASSISTANT
compile-bench> grep -R "rpl_getgroups" -n /home/peter/coreutils-5.0 | head -n 20
/home/peter/coreutils-5.0/config.hin:1344:/* Define as rpl_getgroups if getgroups doesn't work right. */
/home/peter/coreutils-5.0/config.status:1284:${ac_dA}getgroups${ac_dB}getgroups${ac_dC}rpl_getgroups${ac_dD}
/home/peter/coreutils-5.0/config.status:1803:${ac_uA}getgroups${ac_uB}getgroups${ac_uC}rpl_getgroups${ac_uD}
/home/peter/coreutils-5.0/aclocal.m4:3362:    AC_DEFINE(getgroups, rpl_getgroups,
/home/peter/coreutils-5.0/aclocal.m4:3363:      [Define as rpl_getgroups if getgroups doesn't work right.])
/home/peter/coreutils-5.0/configure:26351:#define getgroups rpl_getgroups
/home/peter/coreutils-5.0/m4/getgroups.m4:10:    AC_DEFINE(getgroups, rpl_getgroups,
/home/peter/coreutils-5.0/m4/getgroups.m4:11:      [Define as rpl_getgroups if getgroups doesn't work right.])
/home/peter/coreutils-5.0/config.log:20264:| #define getgroups rpl_getgroups
/home/peter/coreutils-5.0/config.log:20636:| #define getgroups rpl_getgroups
/home/peter/coreutils-5.0/config.log:20972:| #define getgroups rpl_getgroups
/home/peter/coreutils-5.0/config.log:21319:| #define getgroups rpl_getgroups
/home/peter/coreutils-5.0/config.log:21707:| #define getgroups rpl_getgroups
/home/peter/coreutils-5.0/config.log:22065:| #define getgroups rpl_getgroups
/home/peter/coreutils-5.0/config.log:22509:| #define getgroups rpl_getgroups
/home/peter/coreutils-5.0/config.log:22853:| #define getgroups rpl_getgroups
/home/peter/coreutils-5.0/config.log:23222:| #define getgroups rpl_getgroups
/home/peter/coreutils-5.0/config.log:23591:| #define getgroups rpl_getgroups
/home/peter/coreutils-5.0/config.log:23969:| #define getgroups rpl_getgroups
/home/peter/coreutils-5.0/config.log:24368:| #define getgroups rpl_getgroups
21 lines
ASSISTANT
compile-bench> grep -R "GETGROUPS_T" -n /home/peter/coreutils-5.0 | head -n 20
/home/peter/coreutils-5.0/config.hin:66:#undef GETGROUPS_T
/home/peter/coreutils-5.0/config.status:977:${ac_dA}GETGROUPS_T${ac_dB}GETGROUPS_T${ac_dC}int${ac_dD}
/home/peter/coreutils-5.0/config.status:1496:${ac_uA}GETGROUPS_T${ac_uB}GETGROUPS_T${ac_uC}int${ac_uD}
/home/peter/coreutils-5.0/old/sh-utils/ChangeLog.0:932:	* configure.in: Add AC_GETGROUPS_T.
/home/peter/coreutils-5.0/old/sh-utils/ChangeLog.0:933:	* id.c, test.c: Don't define GETGROUPS_T.  Now configure does it.
/home/peter/coreutils-5.0/old/sh-utils/ChangeLog.0:1217:	* id.c: GID_T -> GETGROUPS_T, for clarity.
/home/peter/coreutils-5.0/old/fileutils/ChangeLog-1997:3937:	* configure.in: Add AC_GETGROUPS_T.
/home/peter/coreutils-5.0/old/fileutils/ChangeLog-1997:3938:	* eaccess.c: Don't define GETGROUPS_T.  Now configure does it.
/home/peter/coreutils-5.0/old/fileutils/ChangeLog-1997:4618:	* eaccess.c: GID_T -> GETGROUPS_T, for clarity.
/home/peter/coreutils-5.0/configure:6340:#define GETGROUPS_T $ac_cv_type_getgroups
/home/peter/coreutils-5.0/lib/getugroups.c:54:getugroups (int maxcount, GETGROUPS_T *grouplist, char *username, gid_t gid)
/home/peter/coreutils-5.0/lib/group-member.c:39:    GETGROUPS_T *group;
/home/peter/coreutils-5.0/lib/group-member.c:57:  GETGROUPS_T *group;
/home/peter/coreutils-5.0/lib/group-member.c:70:      group = (GETGROUPS_T *) xrealloc (group,
/home/peter/coreutils-5.0/lib/group-member.c:71:					n_group_slots * sizeof (GETGROUPS_T));
/home/peter/coreutils-5.0/lib/getgroups.c:34:getgroups (size_t n, GETGROUPS_T *group)
/home/peter/coreutils-5.0/lib/getgroups.c:37:  GETGROUPS_T *gbuf;
/home/peter/coreutils-5.0/lib/getgroups.c:48:      gbuf = (GETGROUPS_T *) xrealloc (gbuf, n * sizeof (GETGROUPS_T));
/home/peter/coreutils-5.0/config.log:2418:| #define GETGROUPS_T int
/home/peter/coreutils-5.0/config.log:2501:| #define GETGROUPS_T int
21 lines
ASSISTANT
compile-bench> grep -R "getgroups\s*\(" -n /home/peter/coreutils-5.0 | head -n 50
grep: bad regex 'getgroups\s*\(': Missing ')'
ASSISTANT
compile-bench> grep -R "getgroups\s*" /home/peter/coreutils-5.0 | head -n 50
/home/peter/coreutils-5.0/config.hin:/* Define to the type of elements in the array set by `getgroups'. Usually
/home/peter/coreutils-5.0/config.hin:/* Define to 1 if your system has a working `getgroups' function. */
/home/peter/coreutils-5.0/config.hin:/* Define as rpl_getgroups if getgroups doesn't work right. */
/home/peter/coreutils-5.0/config.hin:#undef getgroups
/home/peter/coreutils-5.0/config.status:s,@LIBOBJS@, mkdir$U.o fnmatch$U.o memcmp$U.o readutmp$U.o strnlen$U.o ftw$U.o chown$U.o mktime$U.o nanosleep$U.o group-member$U.o putenv$U.o error$U.o getgroups$U.o rename$U.o mkstemp$U.o tempname$U.o canonicalize$U.o regex$U.o sig2str$U.o memcmp$U.o rpmatch$U.o gettimeofday$U.o getline$U.o obstack$U.o strtod$U.o fsusage$U.o mountlist$U.o,;t t
/home/peter/coreutils-5.0/config.status:s,@LTLIBOBJS@, mkdir$U.lo fnmatch$U.lo memcmp$U.lo readutmp$U.lo strnlen$U.lo ftw$U.lo chown$U.lo mktime$U.lo nanosleep$U.lo group-member$U.lo putenv$U.lo error$U.lo getgroups$U.lo rename$U.lo mkstemp$U.lo tempname$U.lo canonicalize$U.lo regex$U.lo sig2str$U.lo memcmp$U.lo rpmatch$U.lo gettimeofday$U.lo getline$U.lo obstack$U.lo strtod$U.lo fsusage$U.lo mountlist$U.lo,;t t
/home/peter/coreutils-5.0/config.status:${ac_dA}getgroups${ac_dB}getgroups${ac_dC}rpl_getgroups${ac_dD}
/home/peter/coreutils-5.0/config.status:${ac_uA}getgroups${ac_uB}getgroups${ac_uC}rpl_getgroups${ac_uD}
/home/peter/coreutils-5.0/aclocal.m4:  if test $ac_cv_func_getgroups_works = no; then
/home/peter/coreutils-5.0/aclocal.m4:    AC_LIBOBJ(getgroups)
/home/peter/coreutils-5.0/aclocal.m4:    AC_DEFINE(getgroups, rpl_getgroups,
/home/peter/coreutils-5.0/aclocal.m4:      [Define as rpl_getgroups if getgroups doesn't work right.])
/home/peter/coreutils-5.0/tests/install/Makefile:LIBOBJS =  mkdir$U.o fnmatch$U.o memcmp$U.o readutmp$U.o strnlen$U.o ftw$U.o chown$U.o mktime$U.o nanosleep$U.o group-member$U.o putenv$U.o error$U.o getgroups$U.o rename$U.o mkstemp$U.o tempname$U.o canonicalize$U.o regex$U.o sig2str$U.o memcmp$U.o rpmatch$U.o gettimeofday$U.o getline$U.o obstack$U.o strtod$U.o fsusage$U.o mountlist$U.o
/home/peter/coreutils-5.0/tests/install/Makefile:LTLIBOBJS =  mkdir$U.lo fnmatch$U.lo memcmp$U.lo readutmp$U.lo strnlen$U.lo ftw$U.lo chown$U.lo mktime$U.lo nanosleep$U.lo group-member$U.lo putenv$U.lo error$U.lo getgroups$U.lo rename$U.lo mkstemp$U.lo tempname$U.lo canonicalize$U.lo regex$U.lo sig2str$U.lo memcmp$U.lo rpmatch$U.lo gettimeofday$U.lo getline$U.lo obstack$U.lo strtod$U.lo fsusage$U.lo mountlist$U.lo
/home/peter/coreutils-5.0/tests/chgrp/Makefile:LIBOBJS =  mkdir$U.o fnmatch$U.o memcmp$U.o readutmp$U.o strnlen$U.o ftw$U.o chown$U.o mktime$U.o nanosleep$U.o group-member$U.o putenv$U.o error$U.o getgroups$U.o rename$U.o mkstemp$U.o tempname$U.o canonicalize$U.o regex$U.o sig2str$U.o memcmp$U.o rpmatch$U.o gettimeofday$U.o getline$U.o obstack$U.o strtod$U.o fsusage$U.o mountlist$U.o
/home/peter/coreutils-5.0/tests/chgrp/Makefile:LTLIBOBJS =  mkdir$U.lo fnmatch$U
[command output truncated]
name$U.o mkstemp$U.o tempname$U.o canonicalize$U.o regex$U.o sig2str$U.o memcmp$U.o rpmatch$U.o gettimeofday$U.o getline$U.o obstack$U.o strtod$U.o fsusage$U.o mountlist$U.o
/home/peter/coreutils-5.0/tests/uniq/Makefile:LTLIBOBJS =  mkdir$U.lo fnmatch$U.lo memcmp$U.lo readutmp$U.lo strnlen$U.lo ftw$U.lo chown$U.lo mktime$U.lo nanosleep$U.lo group-member$U.lo putenv$U.lo error$U.lo getgroups$U.lo rename$U.lo mkstemp$U.lo tempname$U.lo canonicalize$U.lo regex$U.lo sig2str$U.lo memcmp$U.lo rpmatch$U.lo gettimeofday$U.lo getline$U.lo obstack$U.lo strtod$U.lo fsusage$U.lo mountlist$U.lo
/home/peter/coreutils-5.0/tests/od/Makefile:LIBOBJS =  mkdir$U.o fnmatch$U.o memcmp$U.o readutmp$U.o strnlen$U.o ftw$U.o chown$U.o mktime$U.o nanosleep$U.o group-member$U.o putenv$U.o error$U.o getgroups$U.o rename$U.o mkstemp$U.o tempname$U.o canonicalize$U.o regex$U.o sig2str$U.o memcmp$U.o rpmatch$U.o gettimeofday$U.o getline$U.o obstack$U.o strtod$U.o fsusage$U.o mountlist$U.o
/home/peter/coreutils-5.0/tests/od/Makefile:LTLIBOBJS =  mkdir$U.lo fnmatch$U.lo memcmp$U.lo readutmp$U.lo strnlen$U.lo ftw$U.lo chown$U.lo mktime$U.lo nanosleep$U.lo group-member$U.lo putenv$U.lo error$U.lo getgroups$U.lo rename$U.lo mkstemp$U.lo tempname$U.lo canonicalize$U.lo regex$U.lo sig2str$U.lo memcmp$U.lo rpmatch$U.lo gettimeofday$U.lo getline$U.lo obstack$U.lo strtod$U.lo fsusage$U.lo mountlist$U.lo
/home/peter/coreutils-5.0/tests/md5sum/Makefile:LIBOBJS =  mkdir$U.o fnmatch$U.o memcmp$U.o readutmp$U.o strnlen$U.o ftw$U.o chown$U.o mktime$U.o nanosleep$U.o group-member$U.o putenv$U.o error$U.o getgroups$U.o rename$U.o mkstemp$U.o tempname$U.o canonicalize$U.o regex$U.o sig2str$U.o memcmp$U.o rpmatch$U.o gettimeofday$U.o getline$U.o obstack$U.o strtod$U.o fsusage$U.o mountlist$U.o
/home/peter/coreutils-5.0/tests/md5sum/Makefile:LTLIBOBJS =  mkdir$U.lo fnmatch$U.lo memcmp$U.lo readutmp$U.lo strnlen$U.lo ftw$U.lo chown$U.lo mktime$U.lo nanosleep$U.lo group-member$U.lo putenv$U.lo error$U.lo getgroups$U.lo rename$U.lo mkstemp$U.lo tempname$U.lo canonicalize$U.lo regex$U.lo sig2str$U.lo memcmp$U.lo rpmatch$U.lo gettimeofday$U.lo getline$U.lo obstack$U.lo strtod$U.lo fsusage$U.lo mountlist$U.lo
/home/peter/coreutils-5.0/tests/head/Makefile:LIBOBJS =  mkdir$U.o fnmatch$U.o memcmp$U.o readutmp$U.o strnlen$U.o ftw$U.o chown$U.o mktime$U.o nanosleep$U.o group-member$U.o putenv$U.o error$U.o getgroups$U.o rename$U.o mkstemp$U.o tempname$U.o canonicalize$U.o regex$U.o sig2str$U.o memcmp$U.o rpmatch$U.o gettimeofday$U.o getline$U.o obstack$U.o strtod$U.o fsusage$U.o mountlist$U.o
/home/peter/coreutils-5.0/tests/head/Makefile:LTLIBOBJS =  mkdir$U.lo fnmatch$U.lo memcmp$U.lo readutmp$U.lo strnlen$U.lo ftw$U.lo chown$U.lo mktime$U.lo nanosleep$U.lo group-member$U.lo putenv$U.lo error$U.lo getgroups$U.lo rename$U.lo mkstemp$U.lo tempname$U.lo canonicalize$U.lo regex$U.lo sig2str$U.lo memcmp$U.lo rpmatch$U.lo gettimeofday$U.lo getline$U.lo obstack$U.lo strtod$U.lo fsusage$U.lo mountlist$U.lo
26 lines
ASSISTANT
compile-bench> sed -i 's/getgroups (size_t n, GETGROUPS_T \*group)/getgroups (int n, GETGROUPS_T *group)/' /home/peter/coreutils-5.0/lib/getgroups.c
[empty output]
ASSISTANT
compile-bench> cd /home/peter/coreutils-5.0 && make -j$(getconf _NPROCESSORS_ONLN || echo 1) MAKEINFO=true CFLAGS="-O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy"
make  all-recursive
make[1]: Entering directory '/home/peter/coreutils-5.0'
Making all in lib
make[2]: Entering directory '/home/peter/coreutils-5.0/lib'
make  all-am
make[3]: Entering directory '/home/peter/coreutils-5.0/lib'
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT getgroups.o -MD -MP -MF ".deps/getgroups.Tpo" \
  -c -o getgroups.o `test -f 'getgroups.c' || echo './'`getgroups.c; \
then mv ".deps/getgroups.Tpo" ".deps/getgroups.Po"; \
else rm -f ".deps/getgroups.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT regex.o -MD -MP -MF ".deps/regex.Tpo" \
  -c -o regex.o `test -f 'regex.c' || echo './'`regex.c; \
then mv ".deps/regex.Tpo" ".deps/regex.Po"; \
else rm -f ".deps/regex.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT gettimeofday.o -MD -MP -MF ".deps/gettimeofday.Tpo" \
  -c -o gettimeofday.o `test -f 'gettimeofday.c' || echo './'`gettimeofday.c; \
then mv ".deps/gettimeofday.Tpo" ".deps/gettimeofday.Po"; \
else rm -f ".deps/gettimeofday.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT getline.o -MD -MP -MF ".deps/getline.Tpo" \
  -c -o getline.o `test -f 'getline.c' || echo './'`getline.c; \
then mv ".deps/getline.Tpo" ".deps/getline.Po"; \
else rm -f ".deps/getline.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT obstack.o -MD -MP -MF ".deps/obstack.Tpo" \
  -c -o obstack.o `test -f 'obstack.c' || echo './'`obstack.c; \
then mv ".deps/obstack.Tpo" ".deps/obstack.Po"; \
else rm -f ".deps/obstack.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT strtod.o -MD -MP -MF ".deps/strtod.Tpo" \
  -c -o strtod.o `test -f 'strtod.c' || echo './'`strtod.c; \
then mv ".deps/strtod.Tpo" ".deps/strtod.Po"; \
else rm -f ".deps/strtod.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT fsusage.o -MD -MP -MF ".deps/fsusage.Tpo" \
  -c -o fsusage.o `test -f 'fsusage.c' || echo './'`fsusage.c; \
then mv ".deps/fsusage.Tpo" ".deps/fsusage.Po"; \
else rm -f ".deps/fsusage.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT mountlist.o -MD -MP -MF ".deps/mountlist.Tpo" \
  -c -o mountlist.o `test -f 'mountlist.c' || echo './'`mountlist.c; \
then mv ".deps/mountlist.Tpo" ".deps/mountlist.Po"; \
else rm -f ".deps/mountlist.Tpo"; exit 1; \
fi
getline.c:47:1: error: conflicting types for 'getline'; have 'int(char **, size_t *, FILE *)' {aka 'int(char **, long unsigned int *, FILE *)'}
   47 | getline (char **lineptr, size_t *n, FILE *stream)
      | ^~~~~~~
In file included from /usr/include/fortify/stdio.h:23,
                 from getline.c:31:
/usr/include/stdio.h:155:9: note: previous declaration of 'getline' with type 'ssize_t(char ** restrict,  size_t * restrict,  FILE * restrict)' {aka 'long int(char ** restrict,  long unsigned int * restrict,  FILE * restrict)'}
  155 | ssize_t getline(char **__restrict, size_t *__restrict, FILE *__restrict);
      |         ^~~~~~~
getline.c:53:1: error: conflicting types for 'getdelim'; have 'int(char **, size_t *, int,  FILE *)' {aka 'int(char **, long unsigned int *, int,  FILE *)'}
   53 | getdelim (char **lineptr, size_t *n, int delimiter, FILE *stream)
      | ^~~~~~~~
/usr/include/stdio.h:154:9: note: previous declaration of 'getdelim' with type 'ssize_t(char ** restrict,  size_t * restrict,  int,  FILE * restrict)' {aka 'long int(char ** restrict,  long unsigned int * restrict,  int,  FILE * restrict)'}
  154 | ssize_t getdelim(char **__restrict, size_t *__restrict, int, FILE *__restrict);
      |         ^~~~~~~~
In file included from getgroups.c:20:
../config.h:1346:19: error: conflicting types for 'rpl_getgroups'; have 'int(int,  int *)'
 1346 | #define getgroups rpl_getgroups
      |                   ^~~~~~~~~~~~~
getgroups.c:34:1: note: in expansion of macro 'getgroups'
   34 | getgroups (int n, GETGROUPS_T *group)
      | ^~~~~~~~~
../config.h:1346:19: note: previous declaration of 'rpl_getgroups' with type 'int(int,  gid_t *)' {aka 'int(int,  unsigned int *)'}
 1346 | #define getgroups rpl_getgroups
      |                   ^~~~~~~~~~~~~
make[3]: *** [Makefile:590: getline.o] Error 1
make[3]: *** Waiting for unfinished jobs....
getgroups.c: In function 'rpl_getgroups':
getgroups.c:42:12: error: implicit declaration of function 'getgroups'; did you mean 'setgroups'? [ttps://gcc.gnu.org/onlinedocs/gcc-14.2.0/gcc/Warning-Options.html#index-Wimplicit-function-declaration-Wimplicit-function-declaration]8;;]
   42 |     return getgroups (n, group);
      |            ^~~~~~~~~
      |            setgroups
make[3]: *** [Makefile:590: getgroups.o] Error 1
make[3]: Leaving directory '/home/peter/coreutils-5.0/lib'
make[2]: *** [Makefile:414: all] Error 2
make[2]: Leaving directory '/home/peter/coreutils-5.0/lib'
make[1]: *** [Makefile:244: all-recursive] Error 1
make[1]: Leaving directory '/home/peter/coreutils-5.0'
make: *** [Makefile:199: all] Error 2
85 lines
ASSISTANT
Show reasoning

Inspecting getline conflict

I'm noticing new errors related to 'getline'. It seems there's a conflict because the C library provides 'getline' with a ssize_t return type, while my project defines it with an int return type. This is common, as many projects adopt the 'rpl_getline' replacement. Autotools use '#define getline rpl_getline' to prevent conflicts, but I suspect our config.h might be redefining 'getline.' I need to take a closer look at config.h to clarify this issue.

compile-bench> grep -n "define.*getline" /home/peter/coreutils-5.0/config.h
[empty output]
ASSISTANT
compile-bench> sed -n '1,200p' /home/peter/coreutils-5.0/lib/getline.c
/* getline.c -- Replacement for GNU C library function getline

Copyright (C) 1993, 1996, 1997, 1998, 2000 Free Software Foundation, Inc.

This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License as
published by the Free Software Foundation; either version 2 of the
License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */

/* Written by Jan Brittenson, [email protected].  */

#if HAVE_CONFIG_H
# include <config.h>
#endif

/* The `getdelim' function is only declared if the following symbol
   is defined.  */
#ifndef _GNU_SOURCE
# define _GNU_SOURCE 1
#endif

#include <stdio.h>
#include <sys/types.h>

#if defined __GNU_LIBRARY__ && HAVE_GETDELIM

int
getline (char **lineptr, size_t *n, FILE *stream)
{
  return getdelim (lineptr, n, '\n', stream);
}

#else /* ! have getdelim */

# include "getstr.h"

int
getline (char **lineptr, size_t *n, FILE *stream)
{
  return getstr (lineptr, n, stream, '\n', 0, 0);
}

int
getdelim (char **lineptr, size_t *n, int delimiter, FILE *stream)
{
  return getstr (lineptr, n, stream, delimiter, 0, 0);
}
#endif
58 lines
ASSISTANT
compile-bench> awk '1; /#include <sys\/types.h>/{print "#define getline rpl_getline"; print "#define getdelim rpl_getdelim"}' /home/peter/coreutils-5.0/lib/getline.c > /home/peter/coreutils-5.0/lib/getline.c.new && mv /home/peter/coreutils-5.0/lib/getline.c.new /home/peter/coreutils-5.0/lib/getline.c
[empty output]
ASSISTANT
compile-bench> sed -i 's/#define GETGROUPS_T int/#define GETGROUPS_T gid_t/' /home/peter/coreutils-5.0/config.h
[empty output]
ASSISTANT
compile-bench> cd /home/peter/coreutils-5.0 && make -j$(getconf _NPROCESSORS_ONLN || echo 1) MAKEINFO=true CFLAGS="-O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy"
make  all-recursive
make[1]: Entering directory '/home/peter/coreutils-5.0'
Making all in lib
make[2]: Entering directory '/home/peter/coreutils-5.0/lib'
make  all-am
make[3]: Entering directory '/home/peter/coreutils-5.0/lib'
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT acl.o -MD -MP -MF ".deps/acl.Tpo" \
  -c -o acl.o `test -f 'acl.c' || echo './'`acl.c; \
then mv ".deps/acl.Tpo" ".deps/acl.Po"; \
else rm -f ".deps/acl.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT getdate.o -MD -MP -MF ".deps/getdate.Tpo" \
  -c -o getdate.o `test -f 'getdate.c' || echo './'`getdate.c; \
then mv ".deps/getdate.Tpo" ".deps/getdate.Po"; \
else rm -f ".deps/getdate.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT posixtm.o -MD -MP -MF ".deps/posixtm.Tpo" \
  -c -o posixtm.o `test -f 'posixtm.c' || echo './'`posixtm.c; \
then mv ".deps/posixtm.Tpo" ".deps/posixtm.Po"; \
else rm -f ".deps/posixtm.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT posixver.o -MD -MP -MF ".deps/posixver.Tpo" \
  -c -o posixver.o `test -f 'posixver.c' || echo './'`posixver.c; \
then mv ".deps/posixver.Tpo" ".deps/posixver.Po"; \
else rm -f ".deps/posixver.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT strftime.o -MD -MP -MF ".deps/strftime.Tpo" \
  -c -o strftime.o `test -f 'strftime.c' || echo './'`strftime.c; \
then mv ".deps/strftime.Tpo" ".deps/strftime.Po"; \
else rm -f ".deps/strftime.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT getopt.o -MD -MP -MF ".deps/getopt.Tpo" \
  -c -o getopt.o `test -f 'getopt.c' || echo './'`getopt.c; \
then mv ".deps/getopt.Tpo" ".deps/getopt.Po"; \
else rm -f ".deps/getopt.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT getopt1.o -MD -MP -MF ".deps/getopt1.Tpo" \
  -c -o getopt1.o `test -f 'getopt1.c' || echo './'`getopt1.c; \
then mv ".deps/getopt1.Tpo" ".deps/getopt1.Po"; \
else rm -f ".deps/getopt1.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT hash.o -MD -MP -MF ".deps/hash.Tpo" \
  -c -o hash.o `test -f 'hash.c' || echo './'`hash.c; \
then mv ".deps/hash.Tpo" ".deps/
[command output truncated]
.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT nanosleep.o -MD -MP -MF ".deps/nanosleep.Tpo" \
  -c -o nanosleep.o `test -f 'nanosleep.c' || echo './'`nanosleep.c; \
then mv ".deps/nanosleep.Tpo" ".deps/nanosleep.Po"; \
else rm -f ".deps/nanosleep.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT group-member.o -MD -MP -MF ".deps/group-member.Tpo" \
  -c -o group-member.o `test -f 'group-member.c' || echo './'`group-member.c; \
then mv ".deps/group-member.Tpo" ".deps/group-member.Po"; \
else rm -f ".deps/group-member.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT putenv.o -MD -MP -MF ".deps/putenv.Tpo" \
  -c -o putenv.o `test -f 'putenv.c' || echo './'`putenv.c; \
then mv ".deps/putenv.Tpo" ".deps/putenv.Po"; \
else rm -f ".deps/putenv.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT error.o -MD -MP -MF ".deps/error.Tpo" \
  -c -o error.o `test -f 'error.c' || echo './'`error.c; \
then mv ".deps/error.Tpo" ".deps/error.Po"; \
else rm -f ".deps/error.Tpo"; exit 1; \
fi
putenv.c:34:7: warning: conflicting types for built-in function 'malloc'; expected 'void *(long unsigned int)' [ttps://gcc.gnu.org/onlinedocs/gcc-14.2.0/gcc/Warning-Options.html#index-Wbuiltin-declaration-mismatch-Wbuiltin-declaration-mismatch]8;;]
   34 | char *malloc ();
      |       ^~~~~~
putenv.c:29:1: note: 'malloc' is declared in header '<stdlib.h>'
   28 | #include <errno.h>
  +++ |+#include <stdlib.h>
   29 | 
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT getgroups.o -MD -MP -MF ".deps/getgroups.Tpo" \
  -c -o getgroups.o `test -f 'getgroups.c' || echo './'`getgroups.c; \
then mv ".deps/getgroups.Tpo" ".deps/getgroups.Po"; \
else rm -f ".deps/getgroups.Tpo"; exit 1; \
fi
getgroups.c: In function 'rpl_getgroups':
getgroups.c:42:12: error: implicit declaration of function 'getgroups'; did you mean 'setgroups'? [ttps://gcc.gnu.org/onlinedocs/gcc-14.2.0/gcc/Warning-Options.html#index-Wimplicit-function-declaration-Wimplicit-function-declaration]8;;]
   42 |     return getgroups (n, group);
      |            ^~~~~~~~~
      |            setgroups
make[3]: *** [Makefile:590: getgroups.o] Error 1
make[3]: *** Waiting for unfinished jobs....
make[3]: Leaving directory '/home/peter/coreutils-5.0/lib'
make[2]: *** [Makefile:414: all] Error 2
make[2]: Leaving directory '/home/peter/coreutils-5.0/lib'
make[1]: *** [Makefile:244: all-recursive] Error 1
make[1]: Leaving directory '/home/peter/coreutils-5.0'
make: *** [Makefile:199: all] Error 2
91 lines
ASSISTANT
Show reasoning

Evaluating getgroups declaration

It looks like I've run into an issue with the 'getgroups' implicit declaration. Our previous includes added , but thanks to the #define getgroups rpl_getgroups, it turns the prototype into int rpl_getgroups(int, gid_t *), so there's no original prototype available.

To fix this, I think we should #undef getgroups before including , making sure that there’s a visible prototype. Currently, the undef statement is inside a function, which is too late in the process. I need to make this change earlier.Adjusting getgroups patch

I'm planning to patch lib/getgroups.c by moving #undef getgroups above #include or at least close to the includes of config.h. Since we added #include after , the macro's replacement of the getgroups prototype with rpl_getgroups is an issue. It's crucial that unistd.h recognizes the original name. So, I’ll insert #undef getgroups right after #include or just before #include . This should fix the visibility of the prototype!Ensuring getgroups functionality

I need to make sure that the function 'getgroups', defined as 'rpl_getgroups', still works after handling the macro. Using #undef getgroups removes that macro, but we also need to re-enable it so that the function compiles correctly as 'getgroups' instead of 'rpl_getgroups'. Otherwise, there could be symbol conflicts, particularly with libc's 'getgroups'. After including , I think I need to redefine #define getgroups rpl_getgroups to avoid conflicts while also keeping the proper usage to prevent recursion within the code.Modifying include order for getgroups

To get the prototype right, I need to place #undef getgroups before including . This ensures we get the original function name. Once that’s included, I’ll redefine the macro with #define getgroups rpl_getgroups.

Since config.h already sets this macro, I’ll temporarily #undef getgroups, include , and then restore the macro. My patch will include these changes, ensuring the include order looks like this:

```c
#include
#include
#include
#undef getgroups
#include
#define getgroups rpl_getgroups
#include
#include "xalloc.h"
```

I'll also make sure xalloc.h is included last to avoid any issues.Updating lib/getgroups.c

I’m planning to transform lib/getgroups.c by placing #undef getgroups and #define getgroups rpl_getgroups around the includes. Since I can't easily reorder lines with one-liners, I’ll build a new patch using awk.

I’ll insert the #undef getgroups before #include , while ensuring #include stays in its position. The command I’ll use will look like this:

```bash
awk '{ if ($0=="#include ") { print "#undef getgroups"; print "#include "; print "#define getgroups rpl_getgroups" } else print }' file > new && mv new file
```

Let’s run this update!

compile-bench> awk '{if ($0=="#include <unistd.h>") {print "#undef getgroups"; print "#include <unistd.h>"; print "#define getgroups rpl_getgroups"} else print}' /home/peter/coreutils-5.0/lib/getgroups.c > /home/peter/coreutils-5.0/lib/getgroups.c.new && mv /home/peter/coreutils-5.0/lib/getgroups.c.new /home/peter/coreutils-5.0/lib/getgroups.c
[empty output]
ASSISTANT
compile-bench> sed -n '1,120p' /home/peter/coreutils-5.0/lib/getgroups.c
/* provide consistent interface to getgroups for systems that don't allow N==0
   Copyright (C) 1996, 1999 Free Software Foundation, Inc.

   This program is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 2, or (at your option)
   any later version.

   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with this program; if not, write to the Free Software Foundation,
   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */

/* written by Jim Meyering */

#include <config.h>
#include <stdio.h>
#include <sys/types.h>
#undef getgroups
#include <unistd.h>
#define getgroups rpl_getgroups
#include <stdlib.h>

#include "xalloc.h"

/* On at least Ultrix 4.3 and NextStep 3.2, getgroups (0, 0) always fails.
   On other systems, it returns the number of supplemental groups for the
   process.  This function handles that special case and lets the system-
   provided function handle all others. */

int
getgroups (int n, GETGROUPS_T *group)
{
  int n_groups;
  GETGROUPS_T *gbuf;

#undef getgroups

  if (n != 0)
    return getgroups (n, group);

  n = 20;
  gbuf = NULL;
  while (1)
    {
      gbuf = (GETGROUPS_T *) xrealloc (gbuf, n * sizeof (GETGROUPS_T));
      n_groups = getgroups (n, gbuf);
      if (n_groups < n)
	break;
      n += 10;
    }

  free (gbuf);

  return n_groups;
}
61 lines
ASSISTANT
compile-bench> cd /home/peter/coreutils-5.0 && make -j$(getconf _NPROCESSORS_ONLN || echo 1) MAKEINFO=true CFLAGS="-O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy"
make  all-recursive
make[1]: Entering directory '/home/peter/coreutils-5.0'
Making all in lib
make[2]: Entering directory '/home/peter/coreutils-5.0/lib'
make  all-am
make[3]: Entering directory '/home/peter/coreutils-5.0/lib'
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT getgroups.o -MD -MP -MF ".deps/getgroups.Tpo" \
  -c -o getgroups.o `test -f 'getgroups.c' || echo './'`getgroups.c; \
then mv ".deps/getgroups.Tpo" ".deps/getgroups.Po"; \
else rm -f ".deps/getgroups.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT rename.o -MD -MP -MF ".deps/rename.Tpo" \
  -c -o rename.o `test -f 'rename.c' || echo './'`rename.c; \
then mv ".deps/rename.Tpo" ".deps/rename.Po"; \
else rm -f ".deps/rename.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT mkstemp.o -MD -MP -MF ".deps/mkstemp.Tpo" \
  -c -o mkstemp.o `test -f 'mkstemp.c' || echo './'`mkstemp.c; \
then mv ".deps/mkstemp.Tpo" ".deps/mkstemp.Po"; \
else rm -f ".deps/mkstemp.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT tempname.o -MD -MP -MF ".deps/tempname.Tpo" \
  -c -o tempname.o `test -f 'tempname.c' || echo './'`tempname.c; \
then mv ".deps/tempname.Tpo" ".deps/tempname.Po"; \
else rm -f ".deps/tempname.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT canonicalize.o -MD -MP -MF ".deps/canonicalize.Tpo" \
  -c -o canonicalize.o `test -f 'canonicalize.c' || echo './'`canonicalize.c; \
then mv ".deps/canonicalize.Tpo" ".deps/canonicalize.Po"; \
else rm -f ".deps/canonicalize.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT regex.o -MD -MP -MF ".deps/regex.Tpo" \
  -c -o regex.o `test -f 'regex.c' || echo './'`regex.c; \
then mv ".deps/regex.Tpo" ".deps/regex.Po"; \
else rm -f ".deps/regex.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT sig2str.o -MD -MP -MF ".deps/sig2str.Tpo" \
  -c -o sig2str.o `test -f 'sig2str.c' || echo './'`sig2str.c; \
then mv ".deps/sig2str.Tpo" ".deps/sig2str.Po"; \
else rm -f ".deps/sig2str.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT rpmatch.o -MD -MP -MF ".deps/rpmatch.Tpo" \
  -c -o rpmatch.o `
[command output truncated]
OCALEDIR=\"/home/peter/result/share/locale\" -DSHAREDIR=\"/home/peter/result/share\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I. -I../lib -I../lib    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT dircolors.o -MD -MP -MF ".deps/dircolors.Tpo" \
  -c -o dircolors.o `test -f 'dircolors.c' || echo './'`dircolors.c; \
then mv ".deps/dircolors.Tpo" ".deps/dircolors.Po"; \
else rm -f ".deps/dircolors.Tpo"; exit 1; \
fi
if gcc -DLOCALEDIR=\"/home/peter/result/share/locale\" -DSHAREDIR=\"/home/peter/result/share\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I. -I../lib -I../lib    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT du.o -MD -MP -MF ".deps/du.Tpo" \
  -c -o du.o `test -f 'du.c' || echo './'`du.c; \
then mv ".deps/du.Tpo" ".deps/du.Po"; \
else rm -f ".deps/du.Tpo"; exit 1; \
fi
if gcc -DLOCALEDIR=\"/home/peter/result/share/locale\" -DSHAREDIR=\"/home/peter/result/share\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I. -I../lib -I../lib    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT install.o -MD -MP -MF ".deps/install.Tpo" \
  -c -o install.o `test -f 'install.c' || echo './'`install.c; \
then mv ".deps/install.Tpo" ".deps/install.Po"; \
else rm -f ".deps/install.Tpo"; exit 1; \
fi
In file included from dircolors.c:31:
../lib/getline.h:32:1: error: conflicting types for 'getline'; have 'int(char **, size_t *, FILE *)' {aka 'int(char **, long unsigned int *, FILE *)'}
   32 | getline PARAMS ((char **_lineptr, size_t *_n, FILE *_stream));
      | ^~~~~~~
In file included from /usr/include/fortify/stdio.h:23,
                 from dircolors.c:25:
/usr/include/stdio.h:155:9: note: previous declaration of 'getline' with type 'ssize_t(char ** restrict,  size_t * restrict,  FILE * restrict)' {aka 'long int(char ** restrict,  long unsigned int * restrict,  FILE * restrict)'}
  155 | ssize_t getline(char **__restrict, size_t *__restrict, FILE *__restrict);
      |         ^~~~~~~
../lib/getline.h:35:1: error: conflicting types for 'getdelim'; have 'int(char **, size_t *, int,  FILE *)' {aka 'int(char **, long unsigned int *, int,  FILE *)'}
   35 | getdelim PARAMS ((char **_lineptr, size_t *_n, int _delimiter, FILE *_stream));
      | ^~~~~~~~
/usr/include/stdio.h:154:9: note: previous declaration of 'getdelim' with type 'ssize_t(char ** restrict,  size_t * restrict,  int,  FILE * restrict)' {aka 'long int(char ** restrict,  long unsigned int * restrict,  int,  FILE * restrict)'}
  154 | ssize_t getdelim(char **__restrict, size_t *__restrict, int, FILE *__restrict);
      |         ^~~~~~~~
make[3]: *** [Makefile:1263: dircolors.o] Error 1
make[3]: *** Waiting for unfinished jobs....
make[3]: Leaving directory '/home/peter/coreutils-5.0/src'
make[2]: *** [Makefile:815: all] Error 2
make[2]: Leaving directory '/home/peter/coreutils-5.0/src'
make[1]: *** [Makefile:244: all-recursive] Error 1
make[1]: Leaving directory '/home/peter/coreutils-5.0'
make: *** [Makefile:199: all] Error 2
83 lines
ASSISTANT
Show reasoning

Resolving header conflict

I’m facing a new error related to 'lib/getline.h', which is declaring 'getline' prototypes that conflict with the system. I think I need to patch that header to rename the prototypes to 'rpl_getline' and 'rpl_getdelim'. Alternatively, I could wrap them with #ifndef around 'HAVE_GETLINE' or 'HAVE_GETDELIM'. However, some older code may not include these solutions. So, I'll open 'lib/getline.h' to address the issue effectively.

compile-bench> sed -n '1,200p' /home/peter/coreutils-5.0/lib/getline.h
/*  Copyright (C) 1995, 1997, 1999 Free Software Foundation, Inc.

This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */

#ifndef GETLINE_H_
# define GETLINE_H_ 1

# include <stdio.h>

# ifndef PARAMS
#  if defined PROTOTYPES || (defined __STDC__ && __STDC__)
#   define PARAMS(Args) Args
#  else
#   define PARAMS(Args) ()
#  endif
# endif

# if __GLIBC__ < 2
int
getline PARAMS ((char **_lineptr, size_t *_n, FILE *_stream));

int
getdelim PARAMS ((char **_lineptr, size_t *_n, int _delimiter, FILE *_stream));
# endif

#endif /* not GETLINE_H_ */
39 lines
ASSISTANT
Show reasoning

Considering function renaming

I need to rename functions in 'lib/getline.c' to 'rpl_getline' and 'rpl_getdelim', which means I also have to make sure to update the prototypes in 'lib/getline.h'. But now I’m wondering: what if other code includes this header and uses 'getdelim'? I know 'dircolors.c' includes 'lib/getline.h', and it expects prototypes for 'getline' and 'getdelim'. I should check if those functions are being called there.

compile-bench> grep -n "getline\|getdelim" -R /home/peter/coreutils-5.0/src | head -n 20
/home/peter/coreutils-5.0/src/date.c:33:#include "getline.h"
/home/peter/coreutils-5.0/src/date.c:254:      line_length = getline (&line, &buflen, in_stream);
/home/peter/coreutils-5.0/src/md5sum.c:31:#include "getline.h"
/home/peter/coreutils-5.0/src/md5sum.c:367:      line_length = getline (&line, &line_chars_allocated, checkfile_stream);
/home/peter/coreutils-5.0/src/dircolors.c:31:#include "getline.h"
/home/peter/coreutils-5.0/src/dircolors.c:276:	  line_length = getline (&line, &line_chars_allocated, fp);
/home/peter/coreutils-5.0/src/Makefile:82:LIBOBJS =  mkdir$U.o fnmatch$U.o memcmp$U.o readutmp$U.o strnlen$U.o ftw$U.o chown$U.o mktime$U.o nanosleep$U.o group-member$U.o putenv$U.o error$U.o getgroups$U.o rename$U.o mkstemp$U.o tempname$U.o canonicalize$U.o regex$U.o sig2str$U.o memcmp$U.o rpmatch$U.o gettimeofday$U.o getline$U.o obstack$U.o strtod$U.o fsusage$U.o mountlist$U.o
/home/peter/coreutils-5.0/src/Makefile:90:LTLIBOBJS =  mkdir$U.lo fnmatch$U.lo memcmp$U.lo readutmp$U.lo strnlen$U.lo ftw$U.lo chown$U.lo mktime$U.lo nanosleep$U.lo group-member$U.lo putenv$U.lo error$U.lo getgroups$U.lo rename$U.lo mkstemp$U.lo tempname$U.lo canonicalize$U.lo regex$U.lo sig2str$U.lo memcmp$U.lo rpmatch$U.lo gettimeofday$U.lo getline$U.lo obstack$U.lo strtod$U.lo fsusage$U.lo mountlist$U.lo
9 lines
ASSISTANT
compile-bench> sed -i 's/# if __GLIBC__ < 2/# if 0/' /home/peter/coreutils-5.0/lib/getline.h
[empty output]
ASSISTANT
compile-bench> cd /home/peter/coreutils-5.0 && make -j$(getconf _NPROCESSORS_ONLN || echo 1) MAKEINFO=true CFLAGS="-O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy"
make  all-recursive
make[1]: Entering directory '/home/peter/coreutils-5.0'
Making all in lib
make[2]: Entering directory '/home/peter/coreutils-5.0/lib'
make  all-am
make[3]: Entering directory '/home/peter/coreutils-5.0/lib'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/home/peter/coreutils-5.0/lib'
make[2]: Leaving directory '/home/peter/coreutils-5.0/lib'
Making all in src
make[2]: Entering directory '/home/peter/coreutils-5.0/src'
make  all-am
make[3]: Entering directory '/home/peter/coreutils-5.0/src'
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy   -o chgrp  chgrp.o chown-core.o ../lib/libfetish.a  ../lib/libfetish.a 
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy   -o chown  chown.o chown-core.o ../lib/libfetish.a  ../lib/libfetish.a 
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy   -o chmod  chmod.o ../lib/libfetish.a  ../lib/libfetish.a 
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy   -o cp  cp.o copy.o cp-hash.o ../lib/libfetish.a  ../lib/libfetish.a 
if gcc -DLOCALEDIR=\"/home/peter/result/share/locale\" -DSHAREDIR=\"/home/peter/result/share\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I. -I../lib -I../lib    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT dircolors.o -MD -MP -MF ".deps/dircolors.Tpo" \
  -c -o dircolors.o `test -f 'dircolors.c' || echo './'`dircolors.c; \
then mv ".deps/dircolors.Tpo" ".deps/dircolors.Po"; \
else rm -f ".deps/dircolors.Tpo"; exit 1; \
fi
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy   -o dd  dd.o ../lib/libfetish.a  ../lib/libfetish.a 
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy   -o du  du.o ../lib/libfetish.a  ../lib/libfetish.a 
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy   -o ginstall  install.o copy.o cp-hash.o ../lib/libfetish.a  ../lib/libfetish.a 
if gcc -DLOCALEDIR=\"/home/peter/result/share/locale\" -DSHAREDIR=\"/home/peter/result/share\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I. -I../lib -I../lib    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT link.o -MD -MP -MF ".deps/link.Tpo" \
  -c -o link.o `test -f 'link.c' || echo './'`link.c; \
then mv ".deps/link.Tpo" ".deps/link.Po"; \
else rm -f ".deps/link.Tpo"; exit 1; \
fi
if gcc -DLOCALEDIR=\"/home/peter/result/share/locale\" -DSHAREDIR=\"/home/peter/result/share\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I. -I../lib -I../lib    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT ln.o -MD -MP -MF ".deps/ln.Tpo" \
  -c -o ln.o `test -f 'ln.c' || echo './'`ln.c; \
then mv ".deps/ln.Tpo" ".deps/ln.Po"; \
else rm -f ".deps/ln.Tpo"; exit 1; \
fi
if gcc -DLOCALEDIR=\"/home/peter/result/share/locale\" -DSHAREDIR=\"/home/peter/result/share\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I. -I../lib -I../lib    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT ls.o -MD -MP -MF ".deps/ls.Tpo" \
  -c -o ls.o
[command output truncated]
LEDIR=\"/home/peter/result/share/locale\" -DSHAREDIR=\"/home/peter/result/share\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I. -I../lib -I../lib    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT readlink.o -MD -MP -MF ".deps/readlink.Tpo" \
  -c -o readlink.o `test -f 'readlink.c' || echo './'`readlink.c; \
then mv ".deps/readlink.Tpo" ".deps/readlink.Po"; \
else rm -f ".deps/readlink.Tpo"; exit 1; \
fi
if gcc -DLOCALEDIR=\"/home/peter/result/share/locale\" -DSHAREDIR=\"/home/peter/result/share\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I. -I../lib -I../lib    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT rm.o -MD -MP -MF ".deps/rm.Tpo" \
  -c -o rm.o `test -f 'rm.c' || echo './'`rm.c; \
then mv ".deps/rm.Tpo" ".deps/rm.Po"; \
else rm -f ".deps/rm.Tpo"; exit 1; \
fi
if gcc -DLOCALEDIR=\"/home/peter/result/share/locale\" -DSHAREDIR=\"/home/peter/result/share\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I. -I../lib -I../lib    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT rmdir.o -MD -MP -MF ".deps/rmdir.Tpo" \
  -c -o rmdir.o `test -f 'rmdir.c' || echo './'`rmdir.c; \
then mv ".deps/rmdir.Tpo" ".deps/rmdir.Po"; \
else rm -f ".deps/rmdir.Tpo"; exit 1; \
fi
In file included from rmdir.c:25:
rmdir.c: In function 'errno_rmdir_non_empty':
../config.h:1208:31: error: 'configure' undeclared (first use in this function)
 1208 | #define RMDIR_ERRNO_NOT_EMPTY configure error in rmdir-errno.m4
      |                               ^~~~~~~~~
rmdir.c:89:27: note: in expansion of macro 'RMDIR_ERRNO_NOT_EMPTY'
   89 |   return (error_number == RMDIR_ERRNO_NOT_EMPTY);
      |                           ^~~~~~~~~~~~~~~~~~~~~
../config.h:1208:31: note: each undeclared identifier is reported only once for each function it appears in
 1208 | #define RMDIR_ERRNO_NOT_EMPTY configure error in rmdir-errno.m4
      |                               ^~~~~~~~~
rmdir.c:89:27: note: in expansion of macro 'RMDIR_ERRNO_NOT_EMPTY'
   89 |   return (error_number == RMDIR_ERRNO_NOT_EMPTY);
      |                           ^~~~~~~~~~~~~~~~~~~~~
../config.h:1208:41: error: expected ')' before 'error'
 1208 | #define RMDIR_ERRNO_NOT_EMPTY configure error in rmdir-errno.m4
      |                                         ^~~~~
rmdir.c:89:27: note: in expansion of macro 'RMDIR_ERRNO_NOT_EMPTY'
   89 |   return (error_number == RMDIR_ERRNO_NOT_EMPTY);
      |                           ^~~~~~~~~~~~~~~~~~~~~
rmdir.c:89:10: note: to match this '('
   89 |   return (error_number == RMDIR_ERRNO_NOT_EMPTY);
      |          ^
make[3]: *** [Makefile:1263: rmdir.o] Error 1
make[3]: *** Waiting for unfinished jobs....
make[3]: Leaving directory '/home/peter/coreutils-5.0/src'
make[2]: *** [Makefile:815: all] Error 2
make[2]: Leaving directory '/home/peter/coreutils-5.0/src'
make[1]: *** [Makefile:244: all-recursive] Error 1
make[1]: Leaving directory '/home/peter/coreutils-5.0'
make: *** [Makefile:199: all] Error 2
85 lines
ASSISTANT
compile-bench> sed -n '1180,1220p' /home/peter/coreutils-5.0/config.h
#define PACKAGE_NAME "GNU coreutils"

/* Define to the full name and version of this package. */
#define PACKAGE_STRING "GNU coreutils 5.0"

/* Define to the one symbol short name of this package. */
#define PACKAGE_TARNAME "coreutils"

/* Define to the version of this package. */
#define PACKAGE_VERSION "5.0"

/* the number of pending output bytes on stream `fp' */
/* #undef PENDING_OUTPUT_N_BYTES */

/* Define if <inttypes.h> exists and defines unusable PRI* macros. */
/* #undef PRI_MACROS_BROKEN */

/* Define to 1 if the C compiler supports function prototypes. */
#define PROTOTYPES 1

/* Define if rename does not work for source paths with a trailing slash, like
   the one from SunOS 4.1.1_U1. */
#define RENAME_TRAILING_SLASH_BUG 1

/* Define as the return type of signal handlers (`int' or `void'). */
#define RETSIGTYPE void

/* the value to which errno is set when rmdir fails on a nonempty directory */
#define RMDIR_ERRNO_NOT_EMPTY configure error in rmdir-errno.m4

/* Define to 1 if the `setvbuf' function takes the buffering type as its
   second argument and the buffer pointer as the third, as on System V before
   release 3. */
/* #undef SETVBUF_REVERSED */

/* If using the C implementation of alloca, define if you know the
   direction of stack growth for your system; otherwise it will be
   automatically deduced at run-time.
        STACK_DIRECTION > 0 => grows toward higher addresses
        STACK_DIRECTION < 0 => grows toward lower addresses
        STACK_DIRECTION = 0 => direction of growth unknown */
42 lines
ASSISTANT
compile-bench> sed -i 's/#define RMDIR_ERRNO_NOT_EMPTY.*/#define RMDIR_ERRNO_NOT_EMPTY ENOTEMPTY/' /home/peter/coreutils-5.0/config.h
[empty output]
ASSISTANT
compile-bench> cd /home/peter/coreutils-5.0 && make -j$(getconf _NPROCESSORS_ONLN || echo 1) MAKEINFO=true CFLAGS="-O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy"
make  all-recursive
make[1]: Entering directory '/home/peter/coreutils-5.0'
Making all in lib
make[2]: Entering directory '/home/peter/coreutils-5.0/lib'
make  all-am
make[3]: Entering directory '/home/peter/coreutils-5.0/lib'
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT acl.o -MD -MP -MF ".deps/acl.Tpo" \
  -c -o acl.o `test -f 'acl.c' || echo './'`acl.c; \
then mv ".deps/acl.Tpo" ".deps/acl.Po"; \
else rm -f ".deps/acl.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT getdate.o -MD -MP -MF ".deps/getdate.Tpo" \
  -c -o getdate.o `test -f 'getdate.c' || echo './'`getdate.c; \
then mv ".deps/getdate.Tpo" ".deps/getdate.Po"; \
else rm -f ".deps/getdate.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT posixtm.o -MD -MP -MF ".deps/posixtm.Tpo" \
  -c -o posixtm.o `test -f 'posixtm.c' || echo './'`posixtm.c; \
then mv ".deps/posixtm.Tpo" ".deps/posixtm.Po"; \
else rm -f ".deps/posixtm.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT posixver.o -MD -MP -MF ".deps/posixver.Tpo" \
  -c -o posixver.o `test -f 'posixver.c' || echo './'`posixver.c; \
then mv ".deps/posixver.Tpo" ".deps/posixver.Po"; \
else rm -f ".deps/posixver.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT strftime.o -MD -MP -MF ".deps/strftime.Tpo" \
  -c -o strftime.o `test -f 'strftime.c' || echo './'`strftime.c; \
then mv ".deps/strftime.Tpo" ".deps/strftime.Po"; \
else rm -f ".deps/strftime.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT getopt.o -MD -MP -MF ".deps/getopt.Tpo" \
  -c -o getopt.o `test -f 'getopt.c' || echo './'`getopt.c; \
then mv ".deps/getopt.Tpo" ".deps/getopt.Po"; \
else rm -f ".deps/getopt.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT getopt1.o -MD -MP -MF ".deps/getopt1.Tpo" \
  -c -o getopt1.o `test -f 'getopt1.c' || echo './'`getopt1.c; \
then mv ".deps/getopt1.Tpo" ".deps/getopt1.Po"; \
else rm -f ".deps/getopt1.Tpo"; exit 1; \
fi
if gcc -DLIBDIR=\"/home/peter/result/lib\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT hash.o -MD -MP -MF ".deps/hash.Tpo" \
  -c -o hash.o `test -f 'hash.c' || echo './'`hash.c; \
then mv ".deps/hash.Tpo" ".deps/
[command output truncated]
are\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I. -I../lib -I../lib    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT join.o -MD -MP -MF ".deps/join.Tpo" \
  -c -o join.o `test -f 'join.c' || echo './'`join.c; \
then mv ".deps/join.Tpo" ".deps/join.Po"; \
else rm -f ".deps/join.Tpo"; exit 1; \
fi
if gcc -DLOCALEDIR=\"/home/peter/result/share/locale\" -DSHAREDIR=\"/home/peter/result/share\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I. -I../lib -I../lib    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT md5sum.o -MD -MP -MF ".deps/md5sum.Tpo" \
  -c -o md5sum.o `test -f 'md5sum.c' || echo './'`md5sum.c; \
then mv ".deps/md5sum.Tpo" ".deps/md5sum.Po"; \
else rm -f ".deps/md5sum.Tpo"; exit 1; \
fi
if gcc -DLOCALEDIR=\"/home/peter/result/share/locale\" -DSHAREDIR=\"/home/peter/result/share\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I. -I../lib -I../lib    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT md5.o -MD -MP -MF ".deps/md5.Tpo" \
  -c -o md5.o `test -f 'md5.c' || echo './'`md5.c; \
then mv ".deps/md5.Tpo" ".deps/md5.Po"; \
else rm -f ".deps/md5.Tpo"; exit 1; \
fi
if gcc -DLOCALEDIR=\"/home/peter/result/share/locale\" -DSHAREDIR=\"/home/peter/result/share\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I. -I../lib -I../lib    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT nl.o -MD -MP -MF ".deps/nl.Tpo" \
  -c -o nl.o `test -f 'nl.c' || echo './'`nl.c; \
then mv ".deps/nl.Tpo" ".deps/nl.Po"; \
else rm -f ".deps/nl.Tpo"; exit 1; \
fi
if gcc -DLOCALEDIR=\"/home/peter/result/share/locale\" -DSHAREDIR=\"/home/peter/result/share\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I. -I../lib -I../lib    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT od.o -MD -MP -MF ".deps/od.Tpo" \
  -c -o od.o `test -f 'od.c' || echo './'`od.c; \
then mv ".deps/od.Tpo" ".deps/od.Po"; \
else rm -f ".deps/od.Tpo"; exit 1; \
fi
if gcc -DLOCALEDIR=\"/home/peter/result/share/locale\" -DSHAREDIR=\"/home/peter/result/share\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I. -I../lib -I../lib    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT paste.o -MD -MP -MF ".deps/paste.Tpo" \
  -c -o paste.o `test -f 'paste.c' || echo './'`paste.c; \
then mv ".deps/paste.Tpo" ".deps/paste.Po"; \
else rm -f ".deps/paste.Tpo"; exit 1; \
fi
paste.c:55:13: error: storage size of 'dummy_closed' isn't known
   55 | static FILE dummy_closed;
      |             ^~~~~~~~~~~~
paste.c:59:13: error: storage size of 'dummy_endlist' isn't known
   59 | static FILE dummy_endlist;
      |             ^~~~~~~~~~~~~
make[3]: *** [Makefile:1263: paste.o] Error 1
make[3]: *** Waiting for unfinished jobs....
make[3]: Leaving directory '/home/peter/coreutils-5.0/src'
make[2]: *** [Makefile:815: all] Error 2
make[2]: Leaving directory '/home/peter/coreutils-5.0/src'
make[1]: *** [Makefile:244: all-recursive] Error 1
make[1]: Leaving directory '/home/peter/coreutils-5.0'
make: *** [Makefile:199: all] Error 2
90 lines
ASSISTANT
compile-bench> sed -n '1,160p' /home/peter/coreutils-5.0/src/paste.c
/* paste - merge lines of files
   Copyright (C) 1984, 1997-2002 by David M. Ihnat

   This program is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 2, or (at your option)
   any later version.

   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with this program; if not, write to the Free Software Foundation,
   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */

/* Written by David Ihnat.  */

/* The list of valid escape sequences has been expanded over the Unix
   version, to include \b, \f, \r, and \v.

   POSIX changes, bug fixes, long-named options, and cleanup
   by David MacKenzie <[email protected]>.

   Options:
   --serial
   -s				Paste one file at a time rather than
				one line from each file.
   --delimiters=delim-list
   -d delim-list		Consecutively use the characters in
				DELIM-LIST instead of tab to separate
				merged lines.  When DELIM-LIST is exhausted,
				start again at its beginning.
   A FILE of `-' means standard input.
   If no FILEs are given, standard input is used. */

#include <config.h>

#include <stdio.h>
#include <getopt.h>
#include <sys/types.h>
#include "system.h"
#include "closeout.h"
#include "error.h"

/* The official name of this program (e.g., no `g' prefix).  */
#define PROGRAM_NAME "paste"

#define AUTHORS N_ ("David M. Ihnat and David MacKenzie")

/* Indicates that no delimiter should be added in the current position. */
#define EMPTY_DELIM '\0'

static FILE dummy_closed;
/* Element marking a file that has reached EOF and been closed. */
#define CLOSED (&dummy_closed)

static FILE dummy_endlist;
/* Element marking end of list of open files. */
#define ENDLIST (&dummy_endlist)

/* Name this program was run with. */
char *program_name;

/* If nonzero, we have read standard input at some point. */
static int have_read_stdin;

/* If nonzero, merge subsequent lines of each file rather than
   corresponding lines from each file in parallel. */
[command output truncated]

   Return a pointer to the character after the new end of STRPTR. */

static char *
collapse_escapes (char *strptr)
{
  register char *strout;

  strout = strptr;		/* Start at the same place, anyway. */

  while (*strptr)
    {
      if (*strptr != '\\')	/* Is it an escape character? */
	*strout++ = *strptr++;	/* No, just transfer it. */
      else
	{
	  switch (*++strptr)
	    {
	    case '0':
	      *strout++ = EMPTY_DELIM;
	      break;

	    case 'b':
	      *strout++ = '\b';
	      break;

	    case 'f':
	      *strout++ = '\f';
	      break;

	    case 'n':
	      *strout++ = '\n';
	      break;

	    case 'r':
	      *strout++ = '\r';
	      break;

	    case 't':
	      *strout++ = '\t';
	      break;

	    case 'v':
	      *strout++ = '\v';
	      break;

	    default:
	      *strout++ = *strptr;
	      break;
	    }
	  strptr++;
	}
    }
  return strout;
}

/* Perform column paste on the NFILES files named in FNAMPTR.
   Return 0 if no errors, 1 if one or more files could not be
   opened or read. */

static int
paste_parallel (int nfiles, char **fnamptr)
{
  int errors = 0;		/* 1 if open or read errors occur. */
  /* Number of files for which space is allocated in `delbuf' and `fileptr'.
     Enlarged as necessary. */
  int file_list_size = 12;
  int chr IF_LINT (= 0);	/* Input character. */
  int line_length;		/* Number of chars in line. */
141 lines
ASSISTANT
compile-bench> grep -n "fileptr\[" /home/peter/coreutils-5.0/src/paste.c
193:	  fileptr[files_open] = stdin;
197:	  fileptr[files_open] = fopen (fnamptr[files_open], "r");
198:	  if (fileptr[files_open] == NULL)
200:	  else if (fileno (fileptr[files_open]) == 0)
205:  fileptr[files_open] = ENDLIST;
221:      for (i = 0; fileptr[i] != ENDLIST && files_open; i++)
224:	  if (fileptr[i] != CLOSED)
226:	      chr = getc (fileptr[i]);
239:		  chr = getc (fileptr[i]);
247:	      if (fileptr[i] != CLOSED)
249:		  if (ferror (fileptr[i]))
254:		  if (fileptr[i] == stdin)
255:		    clearerr (fileptr[i]); /* Also clear EOF. */
256:		  else if (fclose (fileptr[i]) == EOF)
262:		  fileptr[i] = CLOSED;
266:	      if (fileptr[i + 1] == ENDLIST)
297:	      if (fileptr[i + 1] != ENDLIST)
18 lines
ASSISTANT
compile-bench> sed -n '160,300p' /home/peter/coreutils-5.0/src/paste.c
  int line_length;		/* Number of chars in line. */
  int somedone;			/* 0 if all files empty for this line. */
  /* If all files are just ready to be closed, or will be on this
     round, the string of delimiters must be preserved.
     delbuf[0] through delbuf[file_list_size]
     store the delimiters for closed files. */
  char *delbuf;
  size_t delims_saved;		/* Number of delims saved in `delbuf'. */
  register char *delimptr;	/* Cycling pointer into `delims'. */
  FILE **fileptr;		/* Streams open to the files to process. */
  int files_open;		/* Number of files still open to process. */
  int i;			/* Loop index. */
  int opened_stdin = 0;		/* Nonzero if any fopen got fd 0. */

  delbuf = (char *) xmalloc (file_list_size + 2);
  fileptr = (FILE **) xmalloc ((file_list_size + 1) * sizeof (FILE *));

  /* Attempt to open all files.  This could be expanded to an infinite
     number of files, but at the (considerable) expense of remembering
     each file and its current offset, then opening/reading/closing.  */

  for (files_open = 0; files_open < nfiles; ++files_open)
    {
      if (files_open == file_list_size - 2)
	{
	  file_list_size += 12;
	  delbuf = (char *) xrealloc (delbuf, file_list_size + 2);
	  fileptr = (FILE **) xrealloc ((char *) fileptr, (file_list_size + 1)
					* sizeof (FILE *));
	}
      if (STREQ (fnamptr[files_open], "-"))
	{
	  have_read_stdin = 1;
	  fileptr[files_open] = stdin;
	}
      else
	{
	  fileptr[files_open] = fopen (fnamptr[files_open], "r");
	  if (fileptr[files_open] == NULL)
	    error (EXIT_FAILURE, errno, "%s", fnamptr[files_open]);
	  else if (fileno (fileptr[files_open]) == 0)
	    opened_stdin = 1;
	}
    }

  fileptr[files_open] = ENDLIST;

  if (opened_stdin && have_read_stdin)
    error (EXIT_FAILURE, 0, _("standard input is closed"));

  /* Read a line from each file and output it to stdout separated by a
     delimiter, until we go through the loop without successfully
     reading from any of the files. */

  while (files_open)
    {
      /* Set up for the next line. */
      somedone = 0;
      delimptr = delims;
      delims_saved = 0;

      for (i = 0; fileptr[i] != ENDLIST && files_open; i++)
	{
	  line_length = 0;	/* Clear so we can easily detect EOF. */
	  if (fileptr[i] != CLOSED)
	    {
	      chr = getc (fileptr[i]);
	      if (chr != EOF && delims_saved)
		{
		  fwrite (delbuf, sizeof (char), delims_saved, stdout);
[command output truncated]

	      while (chr != EOF)
		{
		  line_length++;
		  if (chr == '\n')
		    break;
		  putc (chr, stdout);
		  chr = getc (fileptr[i]);
		}
	    }

	  if (line_length == 0)
	    {
	      /* EOF, read error, or closed file.
		 If an EOF or error, close the file and mark it in the list. */
	      if (fileptr[i] != CLOSED)
		{
		  if (ferror (fileptr[i]))
		    {
		      error (0, errno, "%s", fnamptr[i]);
		      errors = 1;
		    }
		  if (fileptr[i] == stdin)
		    clearerr (fileptr[i]); /* Also clear EOF. */
		  else if (fclose (fileptr[i]) == EOF)
		    {
		      error (0, errno, "%s", fnamptr[i]);
		      errors = 1;
		    }

		  fileptr[i] = CLOSED;
		  files_open--;
		}

	      if (fileptr[i + 1] == ENDLIST)
		{
		  /* End of this output line.
		     Is this the end of the whole thing? */
		  if (somedone)
		    {
		      /* No.  Some files were not closed for this line. */
		      if (delims_saved)
			{
			  fwrite (delbuf, sizeof (char), delims_saved, stdout);
			  delims_saved = 0;
			}
		      putc ('\n', stdout);
		    }
		  continue;	/* Next read of files, or exit. */
		}
	      else
		{
		  /* Closed file; add delimiter to `delbuf'. */
		  if (*delimptr != EMPTY_DELIM)
		    delbuf[delims_saved++] = *delimptr;
		  if (++delimptr == delim_end)
		    delimptr = delims;
		}
	    }
	  else
	    {
	      /* Some data read. */
	      somedone++;

	      /* Except for last file, replace last newline with delim. */
	      if (fileptr[i + 1] != ENDLIST)
		{
		  if (chr != '\n')
		    putc (chr, stdout);
141 lines
ASSISTANT
Show reasoning

Evaluating FILE sentinel objects

I’m looking at code that uses FILE sentinel objects, noting that older versions of glibc didn’t require the FILE to be opaque. However, musl's handling is incomplete, necessitating a change to pointer sentinels. I need to replace 'static FILE dummy_closed;' with unique pointer values like (FILE )-1 and (FILE )-2, using 'NULL' for the ENDLIST marker. This way, 'fileptr[i]' will stop at the NULL sentinel, ensuring proper list termination.Refining file pointer handling

I'm analyzing how 'fopen' returns a non-NULL pointer, and though 'stdin' isn’t NULL, using a '-1 pointer' feels unnatural as a sentinel. As long as I don't dereference 'CLOSED', it should be fine. The check looks good: they verify 'if (fileptr[i] != CLOSED) { getc(fileptr[i]) }'. I need to remove static FILE declarations and redefine macros, replacing them with '#define CLOSED ((FILE)-1)' and '#define ENDLIST ((FILE)0)'. I'll ensure there's no macro conflict in 'system.h' while implementing these changes.Updating file with sed replacements

I realize that handling multi-line changes with sed isn’t easy due to newlines. Instead, I can perform two replacements. First, I'll replace 'static FILE dummy_closed;' with a comment: '/ removed opaque FILE static sentinel /'. Next, I'll change '#define CLOSED (&dummy_closed)' to '#define CLOSED ((FILE)-1)'. Then, I'll remove 'static FILE dummy_endlist;' in favor of '/ removed sentinel for endlist /' and switch '#define ENDLIST (&dummy_endlist)' to '#define ENDLIST ((FILE)0)'. Leaving comments is okay while I set these macros. Time to update the file!

compile-bench> sed -i 's/static FILE dummy_closed;/\/\* opaque FILE sentinel removed *\//; s/#define CLOSED (\&dummy_closed)/#define CLOSED ((FILE*)-1)/; s/static FILE dummy_endlist;/\/\* endlist sentinel removed *\//; s/#define ENDLIST (\&dummy_endlist)/#define ENDLIST ((FILE*)0)/' /home/peter/coreutils-5.0/src/paste.c
[empty output]
ASSISTANT
compile-bench> sed -n '1,120p' /home/peter/coreutils-5.0/src/paste.c
/* paste - merge lines of files
   Copyright (C) 1984, 1997-2002 by David M. Ihnat

   This program is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 2, or (at your option)
   any later version.

   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with this program; if not, write to the Free Software Foundation,
   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */

/* Written by David Ihnat.  */

/* The list of valid escape sequences has been expanded over the Unix
   version, to include \b, \f, \r, and \v.

   POSIX changes, bug fixes, long-named options, and cleanup
   by David MacKenzie <[email protected]>.

   Options:
   --serial
   -s				Paste one file at a time rather than
				one line from each file.
   --delimiters=delim-list
   -d delim-list		Consecutively use the characters in
				DELIM-LIST instead of tab to separate
				merged lines.  When DELIM-LIST is exhausted,
				start again at its beginning.
   A FILE of `-' means standard input.
   If no FILEs are given, standard input is used. */

#include <config.h>

#include <stdio.h>
#include <getopt.h>
#include <sys/types.h>
#include "system.h"
#include "closeout.h"
#include "error.h"

/* The official name of this program (e.g., no `g' prefix).  */
#define PROGRAM_NAME "paste"

#define AUTHORS N_ ("David M. Ihnat and David MacKenzie")

/* Indicates that no delimiter should be added in the current position. */
#define EMPTY_DELIM '\0'

/* opaque FILE sentinel removed */
/* Element marking a file that has reached EOF and been closed. */
#define CLOSED ((FILE*)-1)

/* endlist sentinel removed */
/* Element marking end of list of open files. */
#define ENDLIST ((FILE*)0)

/* Name this program was run with. */
char *program_name;

/* If nonzero, we have read standard input at some point. */
static int have_read_stdin;

/* If nonzero, merge subsequent lines of each file rather than
   corresponding lines from each file in parallel. */
static int serial_merge;

/* The delimeters between lines of input files (used cyclically). */
static char *delims;

/* A pointer to the character after the end of `delims'. */
static char *delim_end;

static struct option const longopts[] =
{
  {"serial", no_argument, 0, 's'},
  {"delimiters", required_argument, 0, 'd'},
  {GETOPT_HELP_OPTION_DECL},
  {GETOPT_VERSION_OPTION_DECL},
  {0, 0, 0, 0}
};

/* Replace backslash representations of special characters in
   STRPTR with their actual values.
   The set of possible backslash characters has been expanded beyond
   that recognized by the Unix version.

   Return a pointer to the character after the new end of STRPTR. */

static char *
collapse_escapes (char *strptr)
{
  register char *strout;

  strout = strptr;		/* Start at the same place, anyway. */

  while (*strptr)
    {
      if (*strptr != '\\')	/* Is it an escape character? */
	*strout++ = *strptr++;	/* No, just transfer it. */
      else
	{
	  switch (*++strptr)
	    {
	    case '0':
	      *strout++ = EMPTY_DELIM;
	      break;

	    case 'b':
	      *strout++ = '\b';
	      break;

	    case 'f':
	      *strout++ = '\f';
	      break;
121 lines
ASSISTANT
compile-bench> cd /home/peter/coreutils-5.0 && make -j$(getconf _NPROCESSORS_ONLN || echo 1) MAKEINFO=true CFLAGS="-O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy"
make  all-recursive
make[1]: Entering directory '/home/peter/coreutils-5.0'
Making all in lib
make[2]: Entering directory '/home/peter/coreutils-5.0/lib'
make  all-am
make[3]: Entering directory '/home/peter/coreutils-5.0/lib'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/home/peter/coreutils-5.0/lib'
make[2]: Leaving directory '/home/peter/coreutils-5.0/lib'
Making all in src
make[2]: Entering directory '/home/peter/coreutils-5.0/src'
make  all-am
make[3]: Entering directory '/home/peter/coreutils-5.0/src'
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy   -o chgrp  chgrp.o chown-core.o ../lib/libfetish.a  ../lib/libfetish.a 
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy   -o chown  chown.o chown-core.o ../lib/libfetish.a  ../lib/libfetish.a 
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy   -o chmod  chmod.o ../lib/libfetish.a  ../lib/libfetish.a 
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy   -o cp  cp.o copy.o cp-hash.o ../lib/libfetish.a  ../lib/libfetish.a 
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy   -o dd  dd.o ../lib/libfetish.a  ../lib/libfetish.a 
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy   -o dircolors  dircolors.o ../lib/libfetish.a  ../lib/libfetish.a 
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy   -o du  du.o ../lib/libfetish.a  ../lib/libfetish.a 
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy   -o ginstall  install.o copy.o cp-hash.o ../lib/libfetish.a  ../lib/libfetish.a 
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy   -o link  link.o ../lib/libfetish.a  ../lib/libfetish.a 
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy   -o ln  ln.o ../lib/libfetish.a  ../lib/libfetish.a 
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy   -o dir  ls.o ls-dir.o ../lib/libfetish.a  ../lib/libfetish.a  
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy   -o vdir  ls.o ls-vdir.o ../lib/libfetish.a  ../lib/libfetish.a  
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy   -o ls  ls.o ls-ls.o ../lib/libfetish.a  ../lib/libfetish.a  
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy   -o mkdir  mkdir.o ../lib/libfetish.a  ../lib/libfetish.a 
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy   -o mkfifo  mkfifo.o ../lib/libfetish.a  ../lib/libfetish.a 
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy   -o mknod  mknod.o ../lib/libfetish.a  ../lib/libfetish.a 
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy   -o mv  mv.o copy.o cp-hash.o remove.o ../lib/libfetish.a  ../lib/libfetish.a 
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy   -o readlink  readlink.o ../lib/libfetish.a  ../lib/libfetish.a 
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__memp
[command output truncated]
fi
if gcc -DLOCALEDIR=\"/home/peter/result/share/locale\" -DSHAREDIR=\"/home/peter/result/share\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I. -I../lib -I../lib    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT sleep.o -MD -MP -MF ".deps/sleep.Tpo" \
  -c -o sleep.o `test -f 'sleep.c' || echo './'`sleep.c; \
then mv ".deps/sleep.Tpo" ".deps/sleep.Po"; \
else rm -f ".deps/sleep.Tpo"; exit 1; \
fi
if gcc -DLOCALEDIR=\"/home/peter/result/share/locale\" -DSHAREDIR=\"/home/peter/result/share\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I. -I../lib -I../lib    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT tee.o -MD -MP -MF ".deps/tee.Tpo" \
  -c -o tee.o `test -f 'tee.c' || echo './'`tee.c; \
then mv ".deps/tee.Tpo" ".deps/tee.Po"; \
else rm -f ".deps/tee.Tpo"; exit 1; \
fi
if gcc -DLOCALEDIR=\"/home/peter/result/share/locale\" -DSHAREDIR=\"/home/peter/result/share\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I. -I../lib -I../lib    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT test.o -MD -MP -MF ".deps/test.Tpo" \
  -c -o test.o `test -f 'test.c' || echo './'`test.c; \
then mv ".deps/test.Tpo" ".deps/test.Po"; \
else rm -f ".deps/test.Tpo"; exit 1; \
fi
tee.c:35:12: error: conflicting types for 'tee'; have 'int(int,  const char **)'
   35 | static int tee (int nfiles, const char **files);
      |            ^~~
In file included from system.h:153,
                 from tee.c:26:
/usr/include/fcntl.h:193:9: note: previous declaration of 'tee' with type 'ssize_t(int,  int,  size_t,  unsigned int)' {aka 'long int(int,  int,  long unsigned int,  unsigned int)'}
  193 | ssize_t tee(int, int, size_t, unsigned);
      |         ^~~
if gcc -DLOCALEDIR=\"/home/peter/result/share/locale\" -DSHAREDIR=\"/home/peter/result/share\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I. -I../lib -I../lib    -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy -MT true.o -MD -MP -MF ".deps/true.Tpo" \
  -c -o true.o `test -f 'true.c' || echo './'`true.c; \
then mv ".deps/true.Tpo" ".deps/true.Po"; \
else rm -f ".deps/true.Tpo"; exit 1; \
fi
make[3]: *** [Makefile:1263: tee.o] Error 1
make[3]: *** Waiting for unfinished jobs....
test.c:142:1: error: static declaration of 'eaccess' follows non-static declaration
  142 | eaccess (char const *file, int mode)
      | ^~~~~~~
In file included from /usr/include/fortify/unistd.h:23,
                 from system.h:39,
                 from test.c:41:
/usr/include/unistd.h:196:5: note: previous declaration of 'eaccess' with type 'int(const char *, int)'
  196 | int eaccess(const char *, int);
      |     ^~~~~~~
make[3]: *** [Makefile:1263: test.o] Error 1
make[3]: Leaving directory '/home/peter/coreutils-5.0/src'
make[2]: *** [Makefile:815: all] Error 2
make[2]: Leaving directory '/home/peter/coreutils-5.0/src'
make[1]: *** [Makefile:244: all-recursive] Error 1
make[1]: Leaving directory '/home/peter/coreutils-5.0'
make: *** [Makefile:199: all] Error 2
81 lines
ASSISTANT
Show reasoning

Resolving naming conflicts

I'm facing naming conflicts between ‘tee’ and ‘eaccess’ in my program. The Linux kernel has a system call function called ‘tee’ defined in fcntl.h, and my program defines its own static ‘tee’ function. To solve this, I’ll use a rename directive like ‘#define tee coreutils_tee’ to avoid the conflict. I'll patch ‘src/tee.c’ by renaming the static function ‘tee’ to ‘tee_files’ or something similar to prevent colliding with the kernel's definition. Time to check 'src/tee.c'.

compile-bench> sed -n '1,200p' /home/peter/coreutils-5.0/src/tee.c
/* tee - read from standard input and write to standard output and files.
   Copyright (C) 85,1990-2002 Free Software Foundation, Inc.

   This program is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 2, or (at your option)
   any later version.

   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with this program; if not, write to the Free Software Foundation,
   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */

/* Mike Parker, Richard M. Stallman, and David MacKenzie */

#include <config.h>
#include <stdio.h>
#include <sys/types.h>
#include <signal.h>
#include <getopt.h>

#include "system.h"
#include "closeout.h"
#include "error.h"

/* The official name of this program (e.g., no `g' prefix).  */
#define PROGRAM_NAME "tee"

#define AUTHORS N_ ("Mike Parker, Richard M. Stallman, and David MacKenzie")

static int tee (int nfiles, const char **files);

/* If nonzero, append to output files rather than truncating them. */
static int append;

/* If nonzero, ignore interrupts. */
static int ignore_interrupts;

/* The name that this program was run with. */
char *program_name;

static struct option const long_options[] =
{
  {"append", no_argument, NULL, 'a'},
  {"ignore-interrupts", no_argument, NULL, 'i'},
  {GETOPT_HELP_OPTION_DECL},
  {GETOPT_VERSION_OPTION_DECL},
  {NULL, 0, NULL, 0}
};

void
usage (int status)
{
  if (status != 0)
    fprintf (stderr, _("Try `%s --help' for more information.\n"),
	     program_name);
  else
    {
      printf (_("Usage: %s [OPTION]... [FILE]...\n"), program_name);
      fputs (_("\
Copy standard input to each FILE, and also to standard output.\n\
\n\
  -a, --append              append to the given FILEs, do not overwrite\n\
  -i, --ignore-interrupts   ignore interrupt signals\n\
"), stdout);
      fputs (HELP_OPTION_DESCRIPTION, stdout);
[command output truncated]
     doesn't consume all its input.  */
#ifdef _POSIX_SOURCE
  {
    struct sigaction sigact;

    sigact.sa_handler = SIG_IGN;
    sigemptyset (&sigact.sa_mask);
    sigact.sa_flags = 0;
    sigaction (SIGPIPE, &sigact, NULL);
  }
#else
  signal (SIGPIPE, SIG_IGN);
#endif

  /* Do *not* warn if tee is given no file arguments.
     POSIX requires that it work when given no arguments.  */

  errs = tee (argc - optind, (const char **) &argv[optind]);
  if (close (STDIN_FILENO) != 0)
    error (EXIT_FAILURE, errno, _("standard input"));

  exit (errs);
}

/* Copy the standard input into each of the NFILES files in FILES
   and into the standard output.
   Return 0 if successful, 1 if any errors occur. */

static int
tee (int nfiles, const char **files)
{
  FILE **descriptors;
  char buffer[BUFSIZ];
  int bytes_read, i;
  int ret = 0;
  const char *mode_string = (append ? "a" : "w");

  descriptors = (FILE **) xmalloc ((nfiles + 1) * sizeof (descriptors[0]));

  /* Move all the names `up' one in the argv array to make room for
     the entry for standard output.  This writes into argv[argc].  */
  for (i = nfiles; i >= 1; i--)
    files[i] = files[i - 1];

  SET_BINARY2 (0, 1);

  /* In the array of NFILES + 1 descriptors, make
     the first one correspond to standard output.   */
  descriptors[0] = stdout;
  files[0] = _("standard output");
  SETVBUF (stdout, NULL, _IONBF, 0);

  for (i = 1; i <= nfiles; i++)
    {
      descriptors[i] = fopen (files[i], mode_string);
      if (descriptors[i] == NULL)
	{
	  error (0, errno, "%s", files[i]);
	  ret = 1;
	}
      else
	{
	  SETVBUF (descriptors[i], NULL, _IONBF, 0);
	  SET_BINARY (fileno (descriptors[i]));
	}
    }

  while (1)
    {
141 lines
ASSISTANT
compile-bench> sed -i 's/static int tee (int nfiles, const char \*\*files);/static int cu_tee (int nfiles, const char **files);/; s/errs = tee (/errs = cu_tee (/; s/^tee (int nfiles, const char \*\*files)/cu_tee (int nfiles, const char **files)/' /home/peter/coreutils-5.0/src/tee.c
[empty output]
ASSISTANT
compile-bench> sed -n '1,120p' /home/peter/coreutils-5.0/src/tee.c
/* tee - read from standard input and write to standard output and files.
   Copyright (C) 85,1990-2002 Free Software Foundation, Inc.

   This program is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 2, or (at your option)
   any later version.

   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with this program; if not, write to the Free Software Foundation,
   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */

/* Mike Parker, Richard M. Stallman, and David MacKenzie */

#include <config.h>
#include <stdio.h>
#include <sys/types.h>
#include <signal.h>
#include <getopt.h>

#include "system.h"
#include "closeout.h"
#include "error.h"

/* The official name of this program (e.g., no `g' prefix).  */
#define PROGRAM_NAME "tee"

#define AUTHORS N_ ("Mike Parker, Richard M. Stallman, and David MacKenzie")

static int cu_tee (int nfiles, const char **files);

/* If nonzero, append to output files rather than truncating them. */
static int append;

/* If nonzero, ignore interrupts. */
static int ignore_interrupts;

/* The name that this program was run with. */
char *program_name;

static struct option const long_options[] =
{
  {"append", no_argument, NULL, 'a'},
  {"ignore-interrupts", no_argument, NULL, 'i'},
  {GETOPT_HELP_OPTION_DECL},
  {GETOPT_VERSION_OPTION_DECL},
  {NULL, 0, NULL, 0}
};

void
usage (int status)
{
  if (status != 0)
    fprintf (stderr, _("Try `%s --help' for more information.\n"),
	     program_name);
  else
    {
      printf (_("Usage: %s [OPTION]... [FILE]...\n"), program_name);
      fputs (_("\
Copy standard input to each FILE, and also to standard output.\n\
\n\
  -a, --append              append to the given FILEs, do not overwrite\n\
  -i, --ignore-interrupts   ignore interrupt signals\n\
"), stdout);
      fputs (HELP_OPTION_DESCRIPTION, stdout);
      fputs (VERSION_OPTION_DESCRIPTION, stdout);
      printf (_("\nReport bugs to <%s>.\n"), PACKAGE_BUGREPORT);
    }
  exit (status);
}

int
main (int argc, char **argv)
{
  int errs;
  int optc;

  program_name = argv[0];
  setlocale (LC_ALL, "");
  bindtextdomain (PACKAGE, LOCALEDIR);
  textdomain (PACKAGE);

  atexit (close_stdout);

  append = 0;
  ignore_interrupts = 0;

  while ((optc = getopt_long (argc, argv, "ai", long_options, NULL)) != -1)
    {
      switch (optc)
	{
	case 0:
	  break;

	case 'a':
	  append = 1;
	  break;

	case 'i':
	  ignore_interrupts = 1;
	  break;

	case_GETOPT_HELP_CHAR;

	case_GETOPT_VERSION_CHAR (PROGRAM_NAME, AUTHORS);

	default:
	  usage (EXIT_FAILURE);
	}
    }

  if (ignore_interrupts)
    {
#ifdef _POSIX_SOURCE
      struct sigaction sigact;
121 lines
ASSISTANT
compile-bench> sed -n '120,260p' /home/peter/coreutils-5.0/src/tee.c
      struct sigaction sigact;

      sigact.sa_handler = SIG_IGN;
      sigemptyset (&sigact.sa_mask);
      sigact.sa_flags = 0;
      sigaction (SIGINT, &sigact, NULL);
#else				/* !_POSIX_SOURCE */
      signal (SIGINT, SIG_IGN);
#endif				/* _POSIX_SOURCE */
    }

  /* Don't let us be killed if one of the output files is a pipe that
     doesn't consume all its input.  */
#ifdef _POSIX_SOURCE
  {
    struct sigaction sigact;

    sigact.sa_handler = SIG_IGN;
    sigemptyset (&sigact.sa_mask);
    sigact.sa_flags = 0;
    sigaction (SIGPIPE, &sigact, NULL);
  }
#else
  signal (SIGPIPE, SIG_IGN);
#endif

  /* Do *not* warn if tee is given no file arguments.
     POSIX requires that it work when given no arguments.  */

  errs = cu_tee (argc - optind, (const char **) &argv[optind]);
  if (close (STDIN_FILENO) != 0)
    error (EXIT_FAILURE, errno, _("standard input"));

  exit (errs);
}

/* Copy the standard input into each of the NFILES files in FILES
   and into the standard output.
   Return 0 if successful, 1 if any errors occur. */

static int
cu_tee (int nfiles, const char **files)
{
  FILE **descriptors;
  char buffer[BUFSIZ];
  int bytes_read, i;
  int ret = 0;
  const char *mode_string = (append ? "a" : "w");

  descriptors = (FILE **) xmalloc ((nfiles + 1) * sizeof (descriptors[0]));

  /* Move all the names `up' one in the argv array to make room for
     the entry for standard output.  This writes into argv[argc].  */
  for (i = nfiles; i >= 1; i--)
    files[i] = files[i - 1];

  SET_BINARY2 (0, 1);

  /* In the array of NFILES + 1 descriptors, make
     the first one correspond to standard output.   */
  descriptors[0] = stdout;
  files[0] = _("standard output");
  SETVBUF (stdout, NULL, _IONBF, 0);

  for (i = 1; i <= nfiles; i++)
    {
      descriptors[i] = fopen (files[i], mode_string);
      if (descriptors[i] == NULL)
	{
	  error (0, errno, "%s", files[i]);
	  ret = 1;
	}
      else
	{
	  SETVBUF (descriptors[i], NULL, _IONBF, 0);
	  SET_BINARY (fileno (descriptors[i]));
	}
    }

  while (1)
    {
      bytes_read = read (0, buffer, sizeof buffer);
#ifdef EINTR
      if (bytes_read < 0 && errno == EINTR)
        continue;
#endif
      if (bytes_read <= 0)
	break;

      /* Write to all NFILES + 1 descriptors.
	 Standard output is the first one.  */
      for (i = 0; i <= nfiles; i++)
	{
	  if (descriptors[i] != NULL)
	    fwrite (buffer, bytes_read, 1, descriptors[i]);
	}
    }

  if (bytes_read == -1)
    {
      error (0, errno, _("read error"));
      ret = 1;
    }

  /* Close the files, but not standard output.  */
  for (i = 1; i <= nfiles; i++)
    if (descriptors[i] != NULL
	&& (ferror (descriptors[i]) || fclose (descriptors[i]) == EOF))
      {
	error (0, errno, "%s", files[i]);
	ret = 1;
      }

  free (descriptors);

  return ret;
}
118 lines
ASSISTANT
Show reasoning

Resolving function conflict

I’ve run into a conflict where there's a static declaration of 'eaccess' in 'test.c'. It looks like the system header now includes 'eaccess', which means my static function duplicates it. I need to either rename my function to 'cu_eaccess' or use a guard with '#if HAVE_EACCESS'. So, I'll go ahead and open 'src/test.c' to review where 'eaccess' is defined.

compile-bench> sed -n '120,200p' /home/peter/coreutils-5.0/src/test.c
static int expr (void);
static int term (void);
static int and (void);
static int or (void);

static void test_syntax_error (char const *format, char const *arg)
     ATTRIBUTE_NORETURN;
static void beyond (void) ATTRIBUTE_NORETURN;

static void
test_syntax_error (char const *format, char const *arg)
{
  fprintf (stderr, "%s: ", argv[0]);
  fprintf (stderr, format, arg);
  fflush (stderr);
  test_exit (SHELL_BOOLEAN (FALSE));
}

#if HAVE_SETREUID && HAVE_SETREGID
/* Do the same thing access(2) does, but use the effective uid and gid.  */

static int
eaccess (char const *file, int mode)
{
  static int have_ids;
  static uid_t uid, euid;
  static gid_t gid, egid;
  int result;

  if (have_ids == 0)
    {
      have_ids = 1;
      uid = getuid ();
      gid = getgid ();
      euid = geteuid ();
      egid = getegid ();
    }

  /* Set the real user and group IDs to the effective ones.  */
  if (uid != euid)
    setreuid (euid, uid);
  if (gid != egid)
    setregid (egid, gid);

  result = access (file, mode);

  /* Restore them.  */
  if (uid != euid)
    setreuid (uid, euid);
  if (gid != egid)
    setregid (gid, egid);

  return result;
}
#else
# define eaccess(F, M) euidaccess (F, M)
#endif

/* Increment our position in the argument list.  Check that we're not
   past the end of the argument list.  This check is supressed if the
   argument is FALSE.  Made a macro for efficiency. */
#define advance(f)							\
  do									\
    {									\
      ++pos;								\
      if ((f) && pos >= argc)						\
	beyond ();							\
    }									\
  while (0)

#if !defined (advance)
static int
advance (int f)
{
  ++pos;

  if (f && pos >= argc)
    beyond ();
}
#endif /* advance */

81 lines
ASSISTANT
compile-bench> sed -n '1,80p' /home/peter/coreutils-5.0/src/test.c
/* GNU test program (ksb and mjb) */

/* Modified to run with the GNU shell by bfox. */

/* Copyright (C) 1987-2003 Free Software Foundation, Inc.

   This file is part of GNU Bash, the Bourne Again SHell.

   Bash is free software; you can redistribute it and/or modify it under
   the terms of the GNU General Public License as published by the Free
   Software Foundation; either version 2, or (at your option) any later
   version.

   Bash is distributed in the hope that it will be useful, but WITHOUT ANY
   WARRANTY; without even the implied warranty of MERCHANTABILITY or
   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
   for more details.

   You should have received a copy of the GNU General Public License
   along with this program; if not, write to the Free Software Foundation,
   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */

/* Define TEST_STANDALONE to get the /bin/test version.  Otherwise, you get
   the shell builtin version. */
/* #define TEST_STANDALONE */

#include <config.h>
#include <stdio.h>
#include <sys/types.h>

/* The official name of this program (e.g., no `g' prefix).  */
#define PROGRAM_NAME "test"

#define TEST_STANDALONE 1

#if !defined (TEST_STANDALONE)
# include "shell.h"
# include "posixstat.h"
# include "filecntl.h"
#else /* TEST_STANDALONE */
# include "system.h"
# include "error.h"
# include "euidaccess.h"
# if !defined (S_IXUGO)
#  define S_IXUGO 0111
# endif /* S_IXUGO */
# if defined (_POSIX_VERSION)
#  include <limits.h>
# else /* !_POSIX_VERSION */
#  include <sys/param.h>
# endif /* _POSIX_VERSION */
# define whitespace(c) (((c) == ' ') || ((c) == '\t'))
# define digit(c)  ((c) >= '0' && (c) <= '9')
# define digit_value(c) ((c) - '0')
char *program_name;
#endif /* TEST_STANDALONE */

#if !defined (_POSIX_VERSION)
# include <sys/file.h>
#endif /* !_POSIX_VERSION */

#include <errno.h>
#ifndef errno
extern int errno;
#endif

#undef STREQ
#define STREQ(a, b) ((a)[0] == (b)[0] && strcmp (a, b) == 0)

#if !defined (member)
# define member(c, s) ((c) ? (strchr ((s), (c)) ? 1 : 0) : 0)
#endif /* !member */

extern gid_t getegid ();
extern uid_t geteuid ();

#if !defined (R_OK)
# define R_OK 4
# define W_OK 2
# define X_OK 1
81 lines
ASSISTANT
compile-bench> sed -i '/# include "euidaccess.h"/a # define eaccess cu_eaccess' /home/peter/coreutils-5.0/src/test.c
[empty output]
ASSISTANT
compile-bench> sed -i 's/static int eaccess (char const \*file, int mode)/static int cu_eaccess (char const *file, int mode)/' /home/peter/coreutils-5.0/src/test.c
[empty output]
ASSISTANT
compile-bench> sed -n '120,200p' /home/peter/coreutils-5.0/src/test.c
static int expr (void);
static int term (void);
static int and (void);
static int or (void);

static void test_syntax_error (char const *format, char const *arg)
     ATTRIBUTE_NORETURN;
static void beyond (void) ATTRIBUTE_NORETURN;

static void
test_syntax_error (char const *format, char const *arg)
{
  fprintf (stderr, "%s: ", argv[0]);
  fprintf (stderr, format, arg);
  fflush (stderr);
  test_exit (SHELL_BOOLEAN (FALSE));
}

#if HAVE_SETREUID && HAVE_SETREGID
/* Do the same thing access(2) does, but use the effective uid and gid.  */

static int
eaccess (char const *file, int mode)
{
  static int have_ids;
  static uid_t uid, euid;
  static gid_t gid, egid;
  int result;

  if (have_ids == 0)
    {
      have_ids = 1;
      uid = getuid ();
      gid = getgid ();
      euid = geteuid ();
      egid = getegid ();
    }

  /* Set the real user and group IDs to the effective ones.  */
  if (uid != euid)
    setreuid (euid, uid);
  if (gid != egid)
    setregid (egid, gid);

  result = access (file, mode);

  /* Restore them.  */
  if (uid != euid)
    setreuid (uid, euid);
  if (gid != egid)
    setregid (gid, egid);

  return result;
}
#else
# define eaccess(F, M) euidaccess (F, M)
#endif

/* Increment our position in the argument list.  Check that we're not
   past the end of the argument list.  This check is supressed if the
   argument is FALSE.  Made a macro for efficiency. */
#define advance(f)							\
  do									\
    {									\
      ++pos;								\
      if ((f) && pos >= argc)						\
	beyond ();							\
    }									\
  while (0)

#if !defined (advance)
static int
advance (int f)
{
  ++pos;

  if (f && pos >= argc)
    beyond ();
}
#endif /* advance */
81 lines
ASSISTANT
compile-bench> sed -i 's/eaccess (/cu_eaccess (/g' /home/peter/coreutils-5.0/src/test.c
[empty output]
ASSISTANT
compile-bench> sed -n '120,200p' /home/peter/coreutils-5.0/src/test.c
static int expr (void);
static int term (void);
static int and (void);
static int or (void);

static void test_syntax_error (char const *format, char const *arg)
     ATTRIBUTE_NORETURN;
static void beyond (void) ATTRIBUTE_NORETURN;

static void
test_syntax_error (char const *format, char const *arg)
{
  fprintf (stderr, "%s: ", argv[0]);
  fprintf (stderr, format, arg);
  fflush (stderr);
  test_exit (SHELL_BOOLEAN (FALSE));
}

#if HAVE_SETREUID && HAVE_SETREGID
/* Do the same thing access(2) does, but use the effective uid and gid.  */

static int
cu_eaccess (char const *file, int mode)
{
  static int have_ids;
  static uid_t uid, euid;
  static gid_t gid, egid;
  int result;

  if (have_ids == 0)
    {
      have_ids = 1;
      uid = getuid ();
      gid = getgid ();
      euid = geteuid ();
      egid = getegid ();
    }

  /* Set the real user and group IDs to the effective ones.  */
  if (uid != euid)
    setreuid (euid, uid);
  if (gid != egid)
    setregid (egid, gid);

  result = access (file, mode);

  /* Restore them.  */
  if (uid != euid)
    setreuid (uid, euid);
  if (gid != egid)
    setregid (gid, egid);

  return result;
}
#else
# define eaccess(F, M) euidaccess (F, M)
#endif

/* Increment our position in the argument list.  Check that we're not
   past the end of the argument list.  This check is supressed if the
   argument is FALSE.  Made a macro for efficiency. */
#define advance(f)							\
  do									\
    {									\
      ++pos;								\
      if ((f) && pos >= argc)						\
	beyond ();							\
    }									\
  while (0)

#if !defined (advance)
static int
advance (int f)
{
  ++pos;

  if (f && pos >= argc)
    beyond ();
}
#endif /* advance */
81 lines
ASSISTANT
compile-bench> sed -n '1,120p' /home/peter/coreutils-5.0/src/test.c
/* GNU test program (ksb and mjb) */

/* Modified to run with the GNU shell by bfox. */

/* Copyright (C) 1987-2003 Free Software Foundation, Inc.

   This file is part of GNU Bash, the Bourne Again SHell.

   Bash is free software; you can redistribute it and/or modify it under
   the terms of the GNU General Public License as published by the Free
   Software Foundation; either version 2, or (at your option) any later
   version.

   Bash is distributed in the hope that it will be useful, but WITHOUT ANY
   WARRANTY; without even the implied warranty of MERCHANTABILITY or
   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
   for more details.

   You should have received a copy of the GNU General Public License
   along with this program; if not, write to the Free Software Foundation,
   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */

/* Define TEST_STANDALONE to get the /bin/test version.  Otherwise, you get
   the shell builtin version. */
/* #define TEST_STANDALONE */

#include <config.h>
#include <stdio.h>
#include <sys/types.h>

/* The official name of this program (e.g., no `g' prefix).  */
#define PROGRAM_NAME "test"

#define TEST_STANDALONE 1

#if !defined (TEST_STANDALONE)
# include "shell.h"
# include "posixstat.h"
# include "filecntl.h"
#else /* TEST_STANDALONE */
# include "system.h"
# include "error.h"
# include "euidaccess.h"
# define eaccess cu_eaccess
# if !defined (S_IXUGO)
#  define S_IXUGO 0111
# endif /* S_IXUGO */
# if defined (_POSIX_VERSION)
#  include <limits.h>
# else /* !_POSIX_VERSION */
#  include <sys/param.h>
# endif /* _POSIX_VERSION */
# define whitespace(c) (((c) == ' ') || ((c) == '\t'))
# define digit(c)  ((c) >= '0' && (c) <= '9')
# define digit_value(c) ((c) - '0')
char *program_name;
#endif /* TEST_STANDALONE */

#if !defined (_POSIX_VERSION)
# include <sys/file.h>
#endif /* !_POSIX_VERSION */

#include <errno.h>
#ifndef errno
extern int errno;
#endif

#undef STREQ
#define STREQ(a, b) ((a)[0] == (b)[0] && strcmp (a, b) == 0)

#if !defined (member)
# define member(c, s) ((c) ? (strchr ((s), (c)) ? 1 : 0) : 0)
#endif /* !member */

extern gid_t getegid ();
extern uid_t geteuid ();

#if !defined (R_OK)
# define R_OK 4
# define W_OK 2
# define X_OK 1
# define F_OK 0
#endif /* R_OK */

/* This name is used solely when printing --version information.  */
#define PROGRAM_NAME "test"

/* The following few defines control the truth and false output of each stage.
   TRUE and FALSE are what we use to compute the final output value.
   SHELL_BOOLEAN is the form which returns truth or falseness in shell terms.
   TRUTH_OR is how to do logical or with TRUE and FALSE.
   TRUTH_AND is how to do logical and with TRUE and FALSE..
   Default is TRUE = 1, FALSE = 0, TRUTH_OR = a | b, TRUTH_AND = a & b,
    SHELL_BOOLEAN = (!value). */
#define TRUE 1
#define FALSE 0
#define SHELL_BOOLEAN(value) (!(value))
#define TRUTH_OR(a, b) ((a) | (b))
#define TRUTH_AND(a, b) ((a) & (b))

#if defined (TEST_STANDALONE)
# define test_exit(val) exit (val)
#else
   static jmp_buf test_exit_buf;
   static int test_error_return = 0;
# define test_exit(val) test_error_return = val, longjmp (test_exit_buf, 1)
#endif /* !TEST_STANDALONE */

static int pos;		/* The offset of the current argument in ARGV. */
static int argc;	/* The number of arguments present in ARGV. */
static char **argv;	/* The argument list. */

static int unop (int op);
static int binop (char *s);
static int unary_operator (void);
static int binary_operator (void);
static int two_arguments (void);
static int three_arguments (void);
static int posixtest (void);

120 lines
ASSISTANT
compile-bench> cd /home/peter/coreutils-5.0 && make -j$(getconf _NPROCESSORS_ONLN || echo 1) MAKEINFO=true CFLAGS="-O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy"
make  all-recursive
make[1]: Entering directory '/home/peter/coreutils-5.0'
Making all in lib
make[2]: Entering directory '/home/peter/coreutils-5.0/lib'
make  all-am
make[3]: Entering directory '/home/peter/coreutils-5.0/lib'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/home/peter/coreutils-5.0/lib'
make[2]: Leaving directory '/home/peter/coreutils-5.0/lib'
Making all in src
make[2]: Entering directory '/home/peter/coreutils-5.0/src'
make  all-am
make[3]: Entering directory '/home/peter/coreutils-5.0/src'
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy   -o paste  paste.o ../lib/libfetish.a  ../lib/libfetish.a 
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy   -o pr  pr.o ../lib/libfetish.a  ../lib/libfetish.a 
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy   -o ptx  ptx.o ../lib/libfetish.a  ../lib/libfetish.a 
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy   -o sha1sum  md5sum.o sha1sum.o ../lib/libfetish.a  ../lib/libfetish.a 
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy   -o sort  sort.o ../lib/libfetish.a  ../lib/libfetish.a  
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy   -o split  split.o ../lib/libfetish.a  ../lib/libfetish.a 
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy   -o sum  sum.o ../lib/libfetish.a  ../lib/libfetish.a 
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy   -o tac  tac.o ../lib/libfetish.a  ../lib/libfetish.a 
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy   -o tail  tail.o ../lib/libfetish.a  ../lib/libfetish.a     
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy   -o tr  tr.o ../lib/libfetish.a  ../lib/libfetish.a 
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy   -o tsort  tsort.o ../lib/libfetish.a  ../lib/libfetish.a 
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy   -o unexpand  unexpand.o ../lib/libfetish.a  ../lib/libfetish.a 
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy   -o uniq  uniq.o ../lib/libfetish.a  ../lib/libfetish.a 
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy   -o wc  wc.o ../lib/libfetish.a  ../lib/libfetish.a 
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy   -o basename  basename.o ../lib/libfetish.a  ../lib/libfetish.a 
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy   -o date  date.o ../lib/libfetish.a  ../lib/libfetish.a  
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy   -o dirname  dirname.o ../lib/libfetish.a  ../lib/libfetish.a 
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy   -o echo  echo.o ../lib/libfetish.a  ../lib/libfetish.a 
gcc  -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -D__mempcpy=mempcpy   -o env  env.o ../lib/libfetish.a  ../lib/libfetish.a 
gcc  -O2 -U_FORTIFY_SOURCE
[command output truncated]
.0/tests/shred'
Making all in sort
make[3]: Entering directory '/home/peter/coreutils-5.0/tests/sort'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/coreutils-5.0/tests/sort'
Making all in stty
make[3]: Entering directory '/home/peter/coreutils-5.0/tests/stty'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/coreutils-5.0/tests/stty'
Making all in sum
make[3]: Entering directory '/home/peter/coreutils-5.0/tests/sum'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/coreutils-5.0/tests/sum'
Making all in tac
make[3]: Entering directory '/home/peter/coreutils-5.0/tests/tac'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/coreutils-5.0/tests/tac'
Making all in tail
make[3]: Entering directory '/home/peter/coreutils-5.0/tests/tail'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/coreutils-5.0/tests/tail'
Making all in tail-2
make[3]: Entering directory '/home/peter/coreutils-5.0/tests/tail-2'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/coreutils-5.0/tests/tail-2'
Making all in test
make[3]: Entering directory '/home/peter/coreutils-5.0/tests/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/coreutils-5.0/tests/test'
Making all in touch
make[3]: Entering directory '/home/peter/coreutils-5.0/tests/touch'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/coreutils-5.0/tests/touch'
Making all in tr
make[3]: Entering directory '/home/peter/coreutils-5.0/tests/tr'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/coreutils-5.0/tests/tr'
Making all in tsort
make[3]: Entering directory '/home/peter/coreutils-5.0/tests/tsort'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/coreutils-5.0/tests/tsort'
Making all in unexpand
make[3]: Entering directory '/home/peter/coreutils-5.0/tests/unexpand'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/coreutils-5.0/tests/unexpand'
Making all in uniq
make[3]: Entering directory '/home/peter/coreutils-5.0/tests/uniq'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/coreutils-5.0/tests/uniq'
Making all in wc
make[3]: Entering directory '/home/peter/coreutils-5.0/tests/wc'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/coreutils-5.0/tests/wc'
make[3]: Entering directory '/home/peter/coreutils-5.0/tests'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/home/peter/coreutils-5.0/tests'
make[2]: Leaving directory '/home/peter/coreutils-5.0/tests'
make[2]: Entering directory '/home/peter/coreutils-5.0'
make[2]: Nothing to be done for 'all-am'.
make[2]: Leaving directory '/home/peter/coreutils-5.0'
make[1]: Leaving directory '/home/peter/coreutils-5.0'
96 lines
ASSISTANT
compile-bench> cd /home/peter/coreutils-5.0 && make install MAKEINFO=true
Making install in lib
make[1]: Entering directory '/home/peter/coreutils-5.0/lib'
make[2]: Entering directory '/home/peter/coreutils-5.0/lib'
/bin/sh ../config/mkinstalldirs /home/peter/result/lib
mkdir -p -- /home/peter/result/lib
if test -f /home/peter/result/lib/charset.alias; then \
  sed -f ref-add.sed /home/peter/result/lib/charset.alias > /home/peter/result/lib/charset.tmp ; \
  ../config/install-sh -c -m 644 /home/peter/result/lib/charset.tmp /home/peter/result/lib/charset.alias ; \
  rm -f /home/peter/result/lib/charset.tmp ; \
else \
  if test no = no; then \
    sed -f ref-add.sed charset.alias > /home/peter/result/lib/charset.tmp ; \
    ../config/install-sh -c -m 644 /home/peter/result/lib/charset.tmp /home/peter/result/lib/charset.alias ; \
    rm -f /home/peter/result/lib/charset.tmp ; \
  fi ; \
fi
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/peter/coreutils-5.0/lib'
make[1]: Leaving directory '/home/peter/coreutils-5.0/lib'
Making install in src
make[1]: Entering directory '/home/peter/coreutils-5.0/src'
make[2]: Entering directory '/home/peter/coreutils-5.0/src'
/bin/sh ../config/mkinstalldirs /home/peter/result/bin
mkdir -p -- /home/peter/result/bin
  ../config/install-sh -c chgrp /home/peter/result/bin/chgrp
  ../config/install-sh -c chown /home/peter/result/bin/chown
  ../config/install-sh -c chmod /home/peter/result/bin/chmod
  ../config/install-sh -c cp /home/peter/result/bin/cp
  ../config/install-sh -c dd /home/peter/result/bin/dd
  ../config/install-sh -c dircolors /home/peter/result/bin/dircolors
  ../config/install-sh -c du /home/peter/result/bin/du
  ../config/install-sh -c ginstall /home/peter/result/bin/install
  ../config/install-sh -c link /home/peter/result/bin/link
  ../config/install-sh -c ln /home/peter/result/bin/ln
  ../config/install-sh -c dir /home/peter/result/bin/dir
  ../config/install-sh -c vdir /home/peter/result/bin/vdir
  ../config/install-sh -c ls /home/peter/result/bin/ls
  ../config/install-sh -c mkdir /home/peter/result/bin/mkdir
  ../config/install-sh -c mkfifo /home/peter/result/bin/mkfifo
  ../config/install-sh -c mknod /home/peter/result/bin/mknod
  ../config/install-sh -c mv /home/peter/result/bin/mv
  ../config/install-sh -c readlink /home/peter/result/bin/readlink
  ../config/install-sh -c rm /home/peter/result/bin/rm
  ../config/install-sh -c rmdir /home/peter/result/bin/rmdir
  ../config/install-sh -c shred /home/peter/result/bin/shred
  ../config/install-sh -c stat /home/peter/result/bin/stat
  ../config/install-sh -c sync /home/peter/result/bin/sync
  ../config/install-sh -c touch /home/peter/result/bin/touch
  ../config/install-sh -c unlink /home/peter/result/bin/unlink
  ../config/install-sh -c cat /home/peter/result/bin/cat
  ../config/install-sh -c cksum /home/peter/result/bin/cksum
  ../config/install-sh -c comm /home/peter/result/bin/comm
  ../config/install-sh -c csplit /home/peter/resul
[command output truncated]
-5.0/tests/touch'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/peter/coreutils-5.0/tests/touch'
make[2]: Leaving directory '/home/peter/coreutils-5.0/tests/touch'
Making install in tr
make[2]: Entering directory '/home/peter/coreutils-5.0/tests/tr'
make[3]: Entering directory '/home/peter/coreutils-5.0/tests/tr'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/peter/coreutils-5.0/tests/tr'
make[2]: Leaving directory '/home/peter/coreutils-5.0/tests/tr'
Making install in tsort
make[2]: Entering directory '/home/peter/coreutils-5.0/tests/tsort'
make[3]: Entering directory '/home/peter/coreutils-5.0/tests/tsort'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/peter/coreutils-5.0/tests/tsort'
make[2]: Leaving directory '/home/peter/coreutils-5.0/tests/tsort'
Making install in unexpand
make[2]: Entering directory '/home/peter/coreutils-5.0/tests/unexpand'
make[3]: Entering directory '/home/peter/coreutils-5.0/tests/unexpand'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/peter/coreutils-5.0/tests/unexpand'
make[2]: Leaving directory '/home/peter/coreutils-5.0/tests/unexpand'
Making install in uniq
make[2]: Entering directory '/home/peter/coreutils-5.0/tests/uniq'
make[3]: Entering directory '/home/peter/coreutils-5.0/tests/uniq'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/peter/coreutils-5.0/tests/uniq'
make[2]: Leaving directory '/home/peter/coreutils-5.0/tests/uniq'
Making install in wc
make[2]: Entering directory '/home/peter/coreutils-5.0/tests/wc'
make[3]: Entering directory '/home/peter/coreutils-5.0/tests/wc'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/peter/coreutils-5.0/tests/wc'
make[2]: Leaving directory '/home/peter/coreutils-5.0/tests/wc'
make[2]: Entering directory '/home/peter/coreutils-5.0/tests'
make[3]: Entering directory '/home/peter/coreutils-5.0/tests'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/peter/coreutils-5.0/tests'
make[2]: Leaving directory '/home/peter/coreutils-5.0/tests'
make[1]: Leaving directory '/home/peter/coreutils-5.0/tests'
make[1]: Entering directory '/home/peter/coreutils-5.0'
make[2]: Entering directory '/home/peter/coreutils-5.0'
make[2]: Nothing to be done for 'install-exec-am'.
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/peter/coreutils-5.0'
make[1]: Leaving directory '/home/peter/coreutils-5.0'
108 lines
ASSISTANT
compile-bench> bash -lc 'for f in /home/peter/result/bin/*; do bn=$(basename "$f"); ln -sf "bin/$bn" "/home/peter/result/$bn"; done'
[empty output]
ASSISTANT
Show reasoning

Verifying symlink utilities

I'm checking the symlink for some utilities like 'ls', 'cat', 'touch', 'install', 'yes', 'true', 'false', and 'test'. I might also look at the '[' command. It seems important to ensure they're present and functioning properly. I'll make a list of the result’s top-level characters to see what I find. Let's get this sorted out!

compile-bench> ls -l /home/peter/result | sed -n '1,120p'
total 16
lrwxrwxrwx    1 peter    peter           12 Sep 16 20:30 basename -> bin/basename
drwxr-sr-x    2 peter    peter         4096 Sep 16 20:30 bin
lrwxrwxrwx    1 peter    peter            7 Sep 16 20:30 cat -> bin/cat
lrwxrwxrwx    1 peter    peter            9 Sep 16 20:30 chgrp -> bin/chgrp
lrwxrwxrwx    1 peter    peter            9 Sep 16 20:30 chmod -> bin/chmod
lrwxrwxrwx    1 peter    peter            9 Sep 16 20:30 chown -> bin/chown
lrwxrwxrwx    1 peter    peter           10 Sep 16 20:30 chroot -> bin/chroot
lrwxrwxrwx    1 peter    peter            9 Sep 16 20:30 cksum -> bin/cksum
lrwxrwxrwx    1 peter    peter            8 Sep 16 20:30 comm -> bin/comm
lrwxrwxrwx    1 peter    peter            6 Sep 16 20:30 cp -> bin/cp
lrwxrwxrwx    1 peter    peter           10 Sep 16 20:30 csplit -> bin/csplit
lrwxrwxrwx    1 peter    peter            7 Sep 16 20:30 cut -> bin/cut
lrwxrwxrwx    1 peter    peter            8 Sep 16 20:30 date -> bin/date
lrwxrwxrwx    1 peter    peter            6 Sep 16 20:30 dd -> bin/dd
lrwxrwxrwx    1 peter    peter            6 Sep 16 20:30 df -> bin/df
lrwxrwxrwx    1 peter    peter            7 Sep 16 20:30 dir -> bin/dir
lrwxrwxrwx    1 peter    peter           13 Sep 16 20:30 dircolors -> bin/dircolors
lrwxrwxrwx    1 peter    peter           11 Sep 16 20:30 dirname -> bin/dirname
lrwxrwxrwx    1 peter    peter            6 Sep 16 20:30 du -> bin/du
lrwxrwxrwx    1 peter    peter            8 Sep 16 20:30 echo -> bin/echo
lrwxrwxrwx    1 peter    peter            7 Sep 16 20:30 env -> bin/env
lrwxrwxrwx    1 peter    peter           10 Sep 16 20:30 expand -> bin/expand
lrwxrwxrwx    1 peter    peter            8 Sep 16 20:30 expr -> bin/expr
lrwxrwxrwx    1 peter    peter           10 Sep 16 20:30 factor -> bin/factor
lrwxrwxrwx    1 peter    peter            9 Sep 16 20:30 false -> bin/false
lrwxrwxrwx    1 peter    peter            7 Sep 16 20:30 fmt -> bin/fmt
lrwxrwxrwx    1 peter    peter            8 Sep 16 20:30 fold -> bin/fold
lrwxrwxrwx    1 peter    peter           10 Sep 16 20:30 groups -> bin/groups
lrwxrwxrwx    1 peter    peter            8 Sep 16 20:30 head -> bin/head
lrwxrwxrwx    1 peter    peter           10 Sep 16 20:30 hostid -> bin/hostid
lrwxrwxrwx    1 peter    peter           12 Sep 16 20:30 hostname -> bin/hostname
lrwxrwxrwx    1 peter    peter            6 Sep 16 20:30 id -> bin/id
drwxr-sr-x    2 peter    peter         4096 Sep 16 20:30 info
lrwxrwxrwx    1 peter    peter           11 Sep 16 20:30 install -> bin/install
lrwxrwxrwx    1 peter    peter            8 Sep 16 20:30 join -> bin/join
lrwxrwxrwx    1 peter    peter            8 Sep 16 20:30 kill -> bin/kill
drwxr-sr-x    2 peter    peter         4096 Sep 16 20:30 lib
lrwxrwxrwx    1 peter    peter            8 Sep 16 20:30 link -> bin/link
lrwxrwxrwx    1 peter    peter            6 Sep 16 20:30 ln -> bin/ln
lrwxrwxrwx    1 peter    peter           11 Sep 16 20:30 logname 
[command output truncated]
     11 Sep 16 20:30 pathchk -> bin/pathchk
lrwxrwxrwx    1 peter    peter            9 Sep 16 20:30 pinky -> bin/pinky
lrwxrwxrwx    1 peter    peter            6 Sep 16 20:30 pr -> bin/pr
lrwxrwxrwx    1 peter    peter           12 Sep 16 20:30 printenv -> bin/printenv
lrwxrwxrwx    1 peter    peter           10 Sep 16 20:30 printf -> bin/printf
lrwxrwxrwx    1 peter    peter            7 Sep 16 20:30 ptx -> bin/ptx
lrwxrwxrwx    1 peter    peter            7 Sep 16 20:30 pwd -> bin/pwd
lrwxrwxrwx    1 peter    peter           12 Sep 16 20:30 readlink -> bin/readlink
lrwxrwxrwx    1 peter    peter            6 Sep 16 20:30 rm -> bin/rm
lrwxrwxrwx    1 peter    peter            9 Sep 16 20:30 rmdir -> bin/rmdir
lrwxrwxrwx    1 peter    peter            7 Sep 16 20:30 seq -> bin/seq
lrwxrwxrwx    1 peter    peter           11 Sep 16 20:30 sha1sum -> bin/sha1sum
lrwxrwxrwx    1 peter    peter            9 Sep 16 20:30 shred -> bin/shred
lrwxrwxrwx    1 peter    peter            9 Sep 16 20:30 sleep -> bin/sleep
lrwxrwxrwx    1 peter    peter            8 Sep 16 20:30 sort -> bin/sort
lrwxrwxrwx    1 peter    peter            9 Sep 16 20:30 split -> bin/split
lrwxrwxrwx    1 peter    peter            8 Sep 16 20:30 stat -> bin/stat
lrwxrwxrwx    1 peter    peter            8 Sep 16 20:30 stty -> bin/stty
lrwxrwxrwx    1 peter    peter            7 Sep 16 20:30 sum -> bin/sum
lrwxrwxrwx    1 peter    peter            8 Sep 16 20:30 sync -> bin/sync
lrwxrwxrwx    1 peter    peter            7 Sep 16 20:30 tac -> bin/tac
lrwxrwxrwx    1 peter    peter            8 Sep 16 20:30 tail -> bin/tail
lrwxrwxrwx    1 peter    peter            7 Sep 16 20:30 tee -> bin/tee
lrwxrwxrwx    1 peter    peter            8 Sep 16 20:30 test -> bin/test
lrwxrwxrwx    1 peter    peter            9 Sep 16 20:30 touch -> bin/touch
lrwxrwxrwx    1 peter    peter            6 Sep 16 20:30 tr -> bin/tr
lrwxrwxrwx    1 peter    peter            8 Sep 16 20:30 true -> bin/true
lrwxrwxrwx    1 peter    peter            9 Sep 16 20:30 tsort -> bin/tsort
lrwxrwxrwx    1 peter    peter            7 Sep 16 20:30 tty -> bin/tty
lrwxrwxrwx    1 peter    peter            9 Sep 16 20:30 uname -> bin/uname
lrwxrwxrwx    1 peter    peter           12 Sep 16 20:30 unexpand -> bin/unexpand
lrwxrwxrwx    1 peter    peter            8 Sep 16 20:30 uniq -> bin/uniq
lrwxrwxrwx    1 peter    peter           10 Sep 16 20:30 unlink -> bin/unlink
lrwxrwxrwx    1 peter    peter           10 Sep 16 20:30 uptime -> bin/uptime
lrwxrwxrwx    1 peter    peter            9 Sep 16 20:30 users -> bin/users
lrwxrwxrwx    1 peter    peter            8 Sep 16 20:30 vdir -> bin/vdir
lrwxrwxrwx    1 peter    peter            6 Sep 16 20:30 wc -> bin/wc
lrwxrwxrwx    1 peter    peter            7 Sep 16 20:30 who -> bin/who
lrwxrwxrwx    1 peter    peter           10 Sep 16 20:30 whoami -> bin/whoami
lrwxrwxrwx    1 peter    peter            7 Sep 16 20:30 yes -> bin/yes
83 lines
ASSISTANT
Show reasoning

Verifying uptime installation

I’m checking the details of an earlier installation and see a symlink from 'result/uptime' to 'bin/uptime'. I'm wondering if we installed 'uptime' in coreutils 5.0, which seems to include it. The listing confirms that 'bin/uptime' exists. The release note suggests that 'uptime' is included, and statistics back this up because 'bin/uptime' is indeed present. This is a good sign!

compile-bench> ls -l /home/peter/result/bin/uptime
-rwxr-xr-x    1 peter    peter        43648 Sep 16 20:30 /home/peter/result/bin/uptime
ASSISTANT
compile-bench> ls -1 /home/peter/result/bin | wc -l
88
ASSISTANT
compile-bench> bash -lc 'echo symlink_count=$(find /home/peter/result -maxdepth 1 -type l | wc -l); echo bin_entries=$(ls -1 /home/peter/result/bin | wc -l)'}
symlink_count=88
bin_entries=88}
3 lines
ASSISTANT
Show reasoning

Verifying coreutils installation

I’m checking over the installation of the coreutils package. There's a potential issue with a curly brace at the end, but that’s not crucial. We’ve got symlinks for the utilities, and I need to verify the compilation of coreutils 5.0 on modern Alpine. After making some modifications and patching a few files, I installed everything to /home/peter/result. Now I've verified that both result/uptime exists and points to the compiled binary. Time to summarize this for the user!Summarizing coreutils symlinks

I've created symlinks for all coreutils utilities, making them accessible under /home/peter/result/utility. For instance, /home/peter/result/uptime points to the compiled uptime binary. Now I need to summarize this for the user. I’ll verify by checking '/home/peter/result/ls' as a test. I should inform the user that I built and installed everything, including symlinks for 88 utilities. At the end, I'll present the ls -l lines to confirm that I completed the user’s request correctly!Crafting final message

I’ve executed everything successfully, so it’s time to craft the final message. I’ll mention that Coreutils 5.0 has been installed to /home/peter/result. It’s worth noting that there were some code modifications needed for building on modern systems, but I’ll keep that concise. I want to make sure the user has all necessary information without overwhelming details. Now, I’ll go ahead and produce that final response!

I compiled GNU coreutils v5.0 from /home/peter/coreutils.tar.gz, installed it into /home/peter/result, and created top-level symlinks for every installed utility.

What I did:
- Extracted and configured coreutils with prefix=/home/peter/result (non-interactive), and applied necessary fixes to build on modern Alpine/musl.
- Built and installed all utilities into /home/peter/result/bin.
- Created symlinks /home/peter/result/ -> /home/peter/result/bin/ for every installed utility.

Notes on fixes applied during the build (to make this old release compile on a modern toolchain/musl):
- Forced STDC headers and type detection to avoid bad typedef redefinitions (e.g., ino_t).
- Disabled fortify to avoid wrapper conflicts: CFLAGS included -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0.
- Adjusted gnulib replacements:
- getgroups: included unistd/stdlib headers, aligned types, and ensured proper prototype handling under macro replacement.
- getline/getdelim: renamed replacement functions to rpl_getline/rpl_getdelim and stopped installing conflicting prototypes on non-glibc.
- Fixed RMDIR errno detection in config.h to ENOTEMPTY for Linux.
- Resolved musl FILE opacity in paste by using pointer sentinels instead of static FILE objects.
- Resolved name collisions:
- tee: renamed internal function to avoid conflict with Linux’s tee(2).
- test: renamed eaccess wrapper to avoid conflict with libc eaccess.

Verification:
- Binaries installed: 88 utilities under /home/peter/result/bin.
- Symlinks created: 88 symlinks at /home/peter/result pointing to bin/.
- Example checks:
- /home/peter/result/uptime -> bin/uptime (exists; target is an ELF binary)
- /home/peter/result/ls -> bin/ls
- /home/peter/result/cat -> bin/cat

If you want me to output the full list of utilities/symlinks or run a spot check on a few more, let me know.

Task finished successfully, all checks passed!
Checks passed:
sha1sum binary exists
basename exists and --version works
cat exists and --version works
chgrp exists and --version works
chmod exists and --version works
chown exists and --version works
chroot exists and --version works
cksum exists and --version works
comm exists and --version works
cp exists and --version works
csplit exists and --version works
cut exists and --version works
date exists and --version works
dd exists and --version works
df exists and --version works
dir exists and --version works
dircolors exists and --version works
dirname exists and --version works
du exists and --version works
echo exists and --version works
env exists and --version works
expand exists and --version works
expr exists and --version works
factor exists and --version works
false exists (skipping --version check)
fmt exists and --version works
fold exists and --version works
groups exists and --version works
head exists and --version works
hostid exists and --version works
id exists and --version works
install exists and --version works
join exists and --version works
kill exists (skipping --version check)
link exists and --version works
ln exists and --version works
logname exists and --version works
ls exists and --version works
md5sum exists and --version works
mkdir exists and --version works
mkfifo exists and --version works
mknod exists and --version works
mv exists and --version works
nice exists and --version works
nl exists and --version works
nohup exists and --version works
od exists and --version works
paste exists and --version works
pathchk exists and --version works
pinky exists and --version works
pr exists and --version works
printenv exists and --version works
printf exists (skipping --version check)
ptx exists and --version works
pwd exists (skipping --version check)
readlink exists and --version works
rm exists and --version works
rmdir exists and --version works
seq exists and --version works
sha1sum exists and --version works
shred exists and --version works
sleep exists and --version works
sort exists and --version works
split exists and --version works
stat exists and --version works
stty exists and --version works
sum exists and --version works
sync exists and --version works
tac exists and --version works
tail exists and --version works
tee exists and --version works
test exists and --version works
touch exists and --version works
tr exists and --version works
true exists and --version works
tsort exists and --version works
tty exists and --version works
uname exists and --version works
unexpand exists and --version works
uniq exists and --version works
unlink exists and --version works
uptime exists and --version works
users exists and --version works
vdir exists and --version works
wc exists and --version works
who exists and --version works
whoami exists and --version works
yes exists and --version works
sha1sum version matches expected
sha1sum produced expected hash