Summary
Performance
| Cost | $0.268 |
| Total elapsed time | 1m57s |
| LLM inference time | 1m14s |
| Command execution time | 43s |
| Commands executed | 23 |
All details >
| Attempt ID | 8px1mqre8990l | Attempt group | run-16-09-22-05 |
| Revision | fb5c74bd2fee | AWS Instance | m8i.2xlarge |
| Start time | 2025-09-16T22:03:33.979Z | End time | 2025-09-16T22:05:35.599Z |
| Task | curl-ssl | Environment | ubuntu-22.04-amd64 |
| Model |  claude-sonnet-4 | OpenRouter slug | anthropic/claude-sonnet-4 |
| Temperature | 1 | Explicit prompt caching | true |
| User msg after tool call | false | Max tool calls | 70 |
| Total timeout seconds | 900 | Single command timeout | 600 |
| Cost | $0.268 | Duration | 1m57s |
| LLM inference time | 1m14s | Command execution time | 43s |
| Final context tokens | 19,261 | Total output tokens | 2,722 |
| Output reasoning tokens | 0 | Messages | 49 |
| Assistant messages | 24 | User messages | 1 |
| System messages | 1 | Commands executed | 23 |
Task
Task: curl-ssl
curl 8.16.0 is a command-line HTTP client.
Project link: curl.se
Task:
Compile and install curl to a specific location. Build with SSL support (TLS v1.3), brotli, zlib and zstd.
Difficulties:
Installing dependencies can be tricky.
Environment:
Ubuntu 22.04 on amd64, with internet access.
Execution log
SYSTEM
You are a package-building specialist operating a Ubuntu 22.04 bash shell via one tool: run_terminal_cmd.
The current working directory of every run_terminal_cmd is /home/peter.
Execution rules:
- Always pass non-interactive flags for any command that could prompt (e.g., -y, --yes, DEBIAN_FRONTEND=noninteractive).
- Don't include any newlines in the command.
- You can use sudo.
If you encounter any errors or issues while doing the user's request, you must fix them and continue the task.
At the end verify you did the user request correctly.
USER
You are given a curl v8.16.0 source code at /home/peter/curl.tar.gz. Please compile curl and install it to /home/peter/result. Create a symlink from /home/peter/result/curl to the actual binary. Make sure it builds with SSL support (TLS v1.3), brotli, zlib and zstd.
ASSISTANT
I'll help you compile curl with the specified features and install it to the desired location. Let me start by extracting the source code and then configure and build it with the required dependencies.
compile-bench> cd /home/peter && tar -xzf curl.tar.gz
[empty output]
ASSISTANT
compile-bench> ls -la /home/peter/ total 4108
drwxr-x--- 1 peter peter 4096 Sep 16 22:03 .
drwxr-xr-x 1 root root 4096 Sep 15 11:21 ..
-rw-r--r-- 1 peter peter 220 Jan 6 2022 .bash_logout
-rw-r--r-- 1 peter peter 3771 Jan 6 2022 .bashrc
-rw-r--r-- 1 peter peter 807 Jan 6 2022 .profile
drwxr-xr-x 14 peter peter 4096 Sep 10 05:43 curl-8.16.0
-rw-r--r-- 1 peter peter 4176617 Sep 16 22:03 curl.tar.gz
↓ 9 lines
compile-bench> ls -la /home/peter/
total 4108 drwxr-x--- 1 peter peter 4096 Sep 16 22:03 . drwxr-xr-x 1 root root 4096 Sep 15 11:21 .. -rw-r--r-- 1 peter peter 220 Jan 6 2022 .bash_logout -rw-r--r-- 1 peter peter 3771 Jan 6 2022 .bashrc -rw-r--r-- 1 peter peter 807 Jan 6 2022 .profile drwxr-xr-x 14 peter peter 4096 Sep 10 05:43 curl-8.16.0 -rw-r--r-- 1 peter peter 4176617 Sep 16 22:03 curl.tar.gz
ASSISTANT
Great! The curl source code has been extracted to /home/peter/curl-8.16.0. Now let me install the required dependencies for building curl with SSL support (TLS v1.3), brotli, zlib, and zstd.
compile-bench> sudo apt update -y
0% [Working]
Hit:1 http://archive.ubuntu.com/ubuntu jammy InRelease
0% [Waiting for headers] [Waiting for headers]
Get:2 http://security.ubuntu.com/ubuntu jammy-security InRelease [129 kB]
0% [Waiting for headers] [2 InRelease 14.2 kB/129 kB 11%]
0% [Waiting for headers] [2 InRelease 14.2 kB/129 kB 11%]
Get:3 http://archive.ubuntu.com/ubuntu jammy-updates InRelease [128 kB]
0% [3 InRelease 12.7 kB/128 kB 10%] [2 InRelease 17.1 kB/129 kB 13%]
0% [3 InRelease 73.5 kB/128 kB 57%]
0% [3 InRelease 99.6 kB/128 kB 78%]
0% [Waiting for headers] [Waiting for headers]
0% [Waiting for headers] [Waiting for headers]
Get:4 http://security.ubuntu.com/ubuntu jammy-security/main amd64 Packages [3311 kB]
0% [Waiting for headers] [4 Packages 2655 B/3311 kB 0%]
Get:5 http://archive.ubuntu.com/ubuntu jammy-backports InRelease [127 kB]
0% [5 InRelease 2588 B/127 kB 2%] [4 Packages 62.0 kB/3311 kB 2%]
0% [4 Packages 162 kB/3311 kB 5%]
18% [Waiting for headers] [4 Packages 247 kB/3311 kB 7%]
Get:6 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 Packages [3638 kB]
19% [6 Packages 2655 B/3638 kB 0%] [4 Packages 373 kB/3311 kB 11%]
33% [6 Packages 796 kB/3638 kB 22%]
33% [4 Packages store 0 B] [6 Packages 796 kB/3638 kB 22%] [Waiting for headers
Get:7 http://security.ubuntu.com/ubuntu jammy-security/multiverse amd64 Packages [80.3 kB]
36% [4 Packages store 0 B] [6 Packages 1701 kB/3638 kB 47%] [7 Packages 24.4 kB
37% [4 Packages store 0 B] [6 Packages 1714 kB/3638 kB 47%] [Waiting for header
Get:8 http://security.ubuntu.com/ubuntu jammy-security/universe amd64 Packages [1274 kB]
37% [4 Packages store 0 B] [6 Packages 1714 kB/3638 kB 47%] [8 Packages 17.1 kB
38% [6 Packages 1805 kB/3638 kB 50%] [8 Packages 195 kB/1274 kB 15%]
38% [7 Packages store 0 B] [6 Packages 1818 kB/3638 kB 50%] [8 Packages 195 kB/
39% [6 Packages 1858 kB/3638 kB 51%] [8 Packages 195 kB/1274 kB 15%]
47% [Waiting for headers] [8 Packages 617 kB/1274 kB 48%]
Get:9 http://archive.ubuntu.com/ubuntu jammy-updates/universe amd64 Packages [1581 kB]
47% [9 Packages 4535
[command output truncated]
B/1274 kB 48%]
47% [6 Packages store 0 B] [9 Packages 4535 B/1581 kB 0%] [8 Packages 617 kB/12
Get:10 http://archive.ubuntu.com/ubuntu jammy-updates/restricted amd64 Packages [5665 kB]
54% [6 Packages store 0 B] [10 Packages 16.7 kB/5665 kB 0%] [8 Packages 747 kB/
64% [6 Packages store 0 B] [10 Packages 2244 kB/5665 kB 40%] [Waiting for heade
Get:11 http://security.ubuntu.com/ubuntu jammy-security/restricted amd64 Packages [5441 kB]
64% [6 Packages store 0 B] [10 Packages 2244 kB/5665 kB 40%] [11 Packages 17.1
70% [10 Packages 3322 kB/5665 kB 59%] [11 Packages 252 kB/5441 kB 5%]
70% [9 Packages store 0 B] [10 Packages 3322 kB/5665 kB 59%] [11 Packages 252 k
78% [10 Packages 5342 kB/5665 kB 94%] [11 Packages 252 kB/5441 kB 5%]
78% [8 Packages store 0 B] [10 Packages 5342 kB/5665 kB 94%] [11 Packages 252 k
79% [8 Packages store 0 B] [11 Packages 252 kB/5441 kB 5%]
83% [11 Packages 1247 kB/5441 kB 23%]
83% [10 Packages store 0 B] [11 Packages 1247 kB/5441 kB 23%]
92% [11 Packages 3402 kB/5441 kB 63%]
99% [Working]
99% [11 Packages store 0 B]
100% [Working]
Fetched 21.4 MB in 2s (11.3 MB/s)
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 3%
Reading package lists... 3%
Reading package lists... 4%
Reading package lists... 4%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 52%
Reading package lists... 52%
Reading package lists... 67%
Reading package lists... 67%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 81%
Reading package lists... 81%
Reading package lists... 96%
Reading package lists... 96%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... Done
Building dependency tree... 0%
Building dependency tree... 0%
Building dependency tree... 0%
Building dependency tree... 50%
Building dependency tree... 50%
Building dependency tree... Done
Reading state information... 0%
Reading state information... 1%
Reading state information... Done
All packages are up to date.
↓ 19 lines
compile-bench> sudo apt update -y
0% [Working]
Hit:1 http://archive.ubuntu.com/ubuntu jammy InRelease
0% [Waiting for headers] [Waiting for headers]
Get:2 http://security.ubuntu.com/ubuntu jammy-security InRelease [129 kB]
0% [Waiting for headers] [2 InRelease 14.2 kB/129 kB 11%]
0% [Waiting for headers] [2 InRelease 14.2 kB/129 kB 11%]
Get:3 http://archive.ubuntu.com/ubuntu jammy-updates InRelease [128 kB]
0% [3 InRelease 12.7 kB/128 kB 10%] [2 InRelease 17.1 kB/129 kB 13%]
0% [3 InRelease 73.5 kB/128 kB 57%]
0% [3 InRelease 99.6 kB/128 kB 78%]
0% [Waiting for headers] [Waiting for headers]
0% [Waiting for headers] [Waiting for headers]
Get:4 http://security.ubuntu.com/ubuntu jammy-security/main amd64 Packages [3311 kB]
0% [Waiting for headers] [4 Packages 2655 B/3311 kB 0%]
Get:5 http://archive.ubuntu.com/ubuntu jammy-backports InRelease [127 kB]
0% [5 InRelease 2588 B/127 kB 2%] [4 Packages 62.0 kB/3311 kB 2%]
0% [4 Packages 162 kB/3311 kB 5%]
18% [Waiting for headers] [4 Packages 247 kB/3311 kB 7%]
Get:6 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 Packages [3638 kB]
19% [6 Packages 2655 B/3638 kB 0%] [4 Packages 373 kB/3311 kB 11%]
33% [6 Packages 796 kB/3638 kB 22%]
33% [4 Packages store 0 B] [6 Packages 796 kB/3638 kB 22%] [Waiting for headers
Get:7 http://security.ubuntu.com/ubuntu jammy-security/multiverse amd64 Packages [80.3 kB]
36% [4 Packages store 0 B] [6 Packages 1701 kB/3638 kB 47%] [7 Packages 24.4 kB
37% [4 Packages store 0 B] [6 Packages 1714 kB/3638 kB 47%] [Waiting for header
Get:8 http://security.ubuntu.com/ubuntu jammy-security/universe amd64 Packages [1274 kB]
37% [4 Packages store 0 B] [6 Packages 1714 kB/3638 kB 47%] [8 Packages 17.1 kB
38% [6 Packages 1805 kB/3638 kB 50%] [8 Packages 195 kB/1274 kB 15%]
38% [7 Packages store 0 B] [6 Packages 1818 kB/3638 kB 50%] [8 Packages 195 kB/
39% [6 Packages 1858 kB/3638 kB 51%] [8 Packages 195 kB/1274 kB 15%]
47% [Waiting for headers] [8 Packages 617 kB/1274 kB 48%]
Get:9 http://archive.ubuntu.com/ubuntu jammy-updates/universe amd64 Packages [1581 kB]
47% [9 Packages 4535
[command output truncated]
B/1274 kB 48%]
47% [6 Packages store 0 B] [9 Packages 4535 B/1581 kB 0%] [8 Packages 617 kB/12
Get:10 http://archive.ubuntu.com/ubuntu jammy-updates/restricted amd64 Packages [5665 kB]
54% [6 Packages store 0 B] [10 Packages 16.7 kB/5665 kB 0%] [8 Packages 747 kB/
64% [6 Packages store 0 B] [10 Packages 2244 kB/5665 kB 40%] [Waiting for heade
Get:11 http://security.ubuntu.com/ubuntu jammy-security/restricted amd64 Packages [5441 kB]
64% [6 Packages store 0 B] [10 Packages 2244 kB/5665 kB 40%] [11 Packages 17.1
70% [10 Packages 3322 kB/5665 kB 59%] [11 Packages 252 kB/5441 kB 5%]
70% [9 Packages store 0 B] [10 Packages 3322 kB/5665 kB 59%] [11 Packages 252 k
78% [10 Packages 5342 kB/5665 kB 94%] [11 Packages 252 kB/5441 kB 5%]
78% [8 Packages store 0 B] [10 Packages 5342 kB/5665 kB 94%] [11 Packages 252 k
79% [8 Packages store 0 B] [11 Packages 252 kB/5441 kB 5%]
83% [11 Packages 1247 kB/5441 kB 23%]
83% [10 Packages store 0 B] [11 Packages 1247 kB/5441 kB 23%]
92% [11 Packages 3402 kB/5441 kB 63%]
99% [Working]
99% [11 Packages store 0 B]
100% [Working]
Fetched 21.4 MB in 2s (11.3 MB/s)
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 3%
Reading package lists... 3%
Reading package lists... 4%
Reading package lists... 4%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 52%
Reading package lists... 52%
Reading package lists... 67%
Reading package lists... 67%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 81%
Reading package lists... 81%
Reading package lists... 96%
Reading package lists... 96%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... Done
Building dependency tree... 0%
Building dependency tree... 0%
Building dependency tree... 0%
Building dependency tree... 50%
Building dependency tree... 50%
Building dependency tree... Done
Reading state information... 0%
Reading state information... 1%
Reading state information... Done
All packages are up to date.
ASSISTANT
compile-bench> sudo DEBIAN_FRONTEND=noninteractive apt install -y build-essential autotools-dev automake libtool pkg-config libssl-dev libbrotli-dev zlib1g-dev libzstd-dev
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 3%
Reading package lists... 3%
Reading package lists... 4%
Reading package lists... 4%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 52%
Reading package lists... 52%
Reading package lists... 67%
Reading package lists... 67%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 81%
Reading package lists... 81%
Reading package lists... 96%
Reading package lists... 96%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... Done
Building dependency tree... 0%
Building dependency tree... 0%
Building dependency tree... 50%
Building dependency tree... 50%
Building dependency tree... 88%
Building dependency tree... Done
Reading state information... 0%
Reading state information... 1%
Reading state information... Done
build-essential is already the newest version (12.9ubuntu3).
The following additional packages will be installed:
autoconf libglib2.0-0 libglib2.0-data libicu70 libltdl-dev libltdl7
libsigsegv2 libxml2 m4 shared-mime-info xdg-user-dirs
Suggested packages:
autoconf-archive gnu-standards autoconf-doc gettext libtool-doc libssl-doc
gfortran | fortran95-compiler gcj-jdk m4-doc
The following NEW packages will be installed:
autoconf automake autotools-dev libbrotli-dev libglib2.0-0 libglib2.0-data
libicu70 libltdl-dev libltdl7 libsigsegv2 libssl-dev libtool libxml2
libzstd-dev m4 pkg-config shared-mime-info xdg-user-dirs zlib1g-dev
0 upgraded, 19 newly installed, 0 to remove and 0 not upgraded.
Need to get 18.2 MB of archives.
After this operation, 67.4 MB of additional disk space will be used.
0% [Working]
Get:1 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libglib2.0-0 amd64 2.72.4-0ubuntu2.6 [1467 kB]
0% [1 libglib2.0-0 14.2 kB/1467 kB 1%]
2% [1 libglib2.0-0 505 kB/1467 kB 34%]
8% [Waiting for headers]
Get:2 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libglib2.0-data all 2.72.4-0ubuntu2.6 [4698 B]
8% [2 libglib2.0-data 4698 B/4698 B 100%]
9% [Working]
Get:3 http://archive.ubuntu.com/ubuntu jammy/main amd64 libicu70 amd64 70.1-2 [10.6 MB]
9% [3 libicu70 15.6 kB/10.6 MB 0%]
25% [3 libicu70 3775 kB/10.6 MB 36%]
56% [Waiting for headers]
Get:4 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libxml2 amd64 2.9.13+dfsg-1ubuntu0.9 [764 kB]
56% [4 libxml2 4096
[command output truncated]
age automake.
Preparing to unpack .../10-automake_1%3a1.16.5-1.3_all.deb ...
Unpacking automake (1:1.16.5-1.3) ...
Selecting previously unselected package libbrotli-dev:amd64.
Preparing to unpack .../11-libbrotli-dev_1.0.9-2build6_amd64.deb ...
Unpacking libbrotli-dev:amd64 (1.0.9-2build6) ...
Selecting previously unselected package libltdl7:amd64.
Preparing to unpack .../12-libltdl7_2.4.6-15build2_amd64.deb ...
Unpacking libltdl7:amd64 (2.4.6-15build2) ...
Selecting previously unselected package libltdl-dev:amd64.
Preparing to unpack .../13-libltdl-dev_2.4.6-15build2_amd64.deb ...
Unpacking libltdl-dev:amd64 (2.4.6-15build2) ...
Selecting previously unselected package libssl-dev:amd64.
Preparing to unpack .../14-libssl-dev_3.0.2-0ubuntu1.19_amd64.deb ...
Unpacking libssl-dev:amd64 (3.0.2-0ubuntu1.19) ...
Selecting previously unselected package libtool.
Preparing to unpack .../15-libtool_2.4.6-15build2_all.deb ...
Unpacking libtool (2.4.6-15build2) ...
Selecting previously unselected package libzstd-dev:amd64.
Preparing to unpack .../16-libzstd-dev_1.4.8+dfsg-3build1_amd64.deb ...
Unpacking libzstd-dev:amd64 (1.4.8+dfsg-3build1) ...
Selecting previously unselected package pkg-config.
Preparing to unpack .../17-pkg-config_0.29.2-1ubuntu3_amd64.deb ...
Unpacking pkg-config (0.29.2-1ubuntu3) ...
Selecting previously unselected package zlib1g-dev:amd64.
Preparing to unpack .../18-zlib1g-dev_1%3a1.2.11.dfsg-2ubuntu9.2_amd64.deb ...
Unpacking zlib1g-dev:amd64 (1:1.2.11.dfsg-2ubuntu9.2) ...
Setting up libzstd-dev:amd64 (1.4.8+dfsg-3build1) ...
Setting up xdg-user-dirs (0.17-2ubuntu4) ...
Setting up libglib2.0-0:amd64 (2.72.4-0ubuntu2.6) ...
No schema files found: doing nothing.
Setting up autotools-dev (20220109.1) ...
Setting up libglib2.0-data (2.72.4-0ubuntu2.6) ...
Setting up libsigsegv2:amd64 (2.13-1ubuntu3) ...
Setting up libssl-dev:amd64 (3.0.2-0ubuntu1.19) ...
Setting up pkg-config (0.29.2-1ubuntu3) ...
Setting up libltdl7:amd64 (2.4.6-15build2) ...
Setting up zlib1g-dev:amd64 (1:1.2.11.dfsg-2ubuntu9.2) ...
Setting up libbrotli-dev:amd64 (1.0.9-2build6) ...
Setting up libicu70:amd64 (70.1-2) ...
Setting up libtool (2.4.6-15build2) ...
Setting up m4 (1.4.18-5ubuntu2) ...
Setting up autoconf (2.71-2) ...
Setting up libxml2:amd64 (2.9.13+dfsg-1ubuntu0.9) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/automake.1.gz because associated file /usr/share/man/man1/automake-1.16.1.gz (of link group automake) doesn't exist
update-alternatives: warning: skip creation of /usr/share/man/man1/aclocal.1.gz because associated file /usr/share/man/man1/aclocal-1.16.1.gz (of link group automake) doesn't exist
Setting up libltdl-dev:amd64 (2.4.6-15build2) ...
Setting up shared-mime-info (2.1-2) ...
Processing triggers for libc-bin (2.35-0ubuntu3.10) ...
↓ 75 lines
compile-bench> sudo DEBIAN_FRONTEND=noninteractive apt install -y build-essential autotools-dev automake libtool pkg-config libssl-dev libbrotli-dev zlib1g-dev libzstd-dev
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 3%
Reading package lists... 3%
Reading package lists... 4%
Reading package lists... 4%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 52%
Reading package lists... 52%
Reading package lists... 67%
Reading package lists... 67%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 81%
Reading package lists... 81%
Reading package lists... 96%
Reading package lists... 96%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... Done
Building dependency tree... 0%
Building dependency tree... 0%
Building dependency tree... 50%
Building dependency tree... 50%
Building dependency tree... 88%
Building dependency tree... Done
Reading state information... 0%
Reading state information... 1%
Reading state information... Done
build-essential is already the newest version (12.9ubuntu3).
The following additional packages will be installed:
autoconf libglib2.0-0 libglib2.0-data libicu70 libltdl-dev libltdl7
libsigsegv2 libxml2 m4 shared-mime-info xdg-user-dirs
Suggested packages:
autoconf-archive gnu-standards autoconf-doc gettext libtool-doc libssl-doc
gfortran | fortran95-compiler gcj-jdk m4-doc
The following NEW packages will be installed:
autoconf automake autotools-dev libbrotli-dev libglib2.0-0 libglib2.0-data
libicu70 libltdl-dev libltdl7 libsigsegv2 libssl-dev libtool libxml2
libzstd-dev m4 pkg-config shared-mime-info xdg-user-dirs zlib1g-dev
0 upgraded, 19 newly installed, 0 to remove and 0 not upgraded.
Need to get 18.2 MB of archives.
After this operation, 67.4 MB of additional disk space will be used.
0% [Working]
Get:1 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libglib2.0-0 amd64 2.72.4-0ubuntu2.6 [1467 kB]
0% [1 libglib2.0-0 14.2 kB/1467 kB 1%]
2% [1 libglib2.0-0 505 kB/1467 kB 34%]
8% [Waiting for headers]
Get:2 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libglib2.0-data all 2.72.4-0ubuntu2.6 [4698 B]
8% [2 libglib2.0-data 4698 B/4698 B 100%]
9% [Working]
Get:3 http://archive.ubuntu.com/ubuntu jammy/main amd64 libicu70 amd64 70.1-2 [10.6 MB]
9% [3 libicu70 15.6 kB/10.6 MB 0%]
25% [3 libicu70 3775 kB/10.6 MB 36%]
56% [Waiting for headers]
Get:4 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libxml2 amd64 2.9.13+dfsg-1ubuntu0.9 [764 kB]
56% [4 libxml2 4096
[command output truncated]
age automake.
Preparing to unpack .../10-automake_1%3a1.16.5-1.3_all.deb ...
Unpacking automake (1:1.16.5-1.3) ...
Selecting previously unselected package libbrotli-dev:amd64.
Preparing to unpack .../11-libbrotli-dev_1.0.9-2build6_amd64.deb ...
Unpacking libbrotli-dev:amd64 (1.0.9-2build6) ...
Selecting previously unselected package libltdl7:amd64.
Preparing to unpack .../12-libltdl7_2.4.6-15build2_amd64.deb ...
Unpacking libltdl7:amd64 (2.4.6-15build2) ...
Selecting previously unselected package libltdl-dev:amd64.
Preparing to unpack .../13-libltdl-dev_2.4.6-15build2_amd64.deb ...
Unpacking libltdl-dev:amd64 (2.4.6-15build2) ...
Selecting previously unselected package libssl-dev:amd64.
Preparing to unpack .../14-libssl-dev_3.0.2-0ubuntu1.19_amd64.deb ...
Unpacking libssl-dev:amd64 (3.0.2-0ubuntu1.19) ...
Selecting previously unselected package libtool.
Preparing to unpack .../15-libtool_2.4.6-15build2_all.deb ...
Unpacking libtool (2.4.6-15build2) ...
Selecting previously unselected package libzstd-dev:amd64.
Preparing to unpack .../16-libzstd-dev_1.4.8+dfsg-3build1_amd64.deb ...
Unpacking libzstd-dev:amd64 (1.4.8+dfsg-3build1) ...
Selecting previously unselected package pkg-config.
Preparing to unpack .../17-pkg-config_0.29.2-1ubuntu3_amd64.deb ...
Unpacking pkg-config (0.29.2-1ubuntu3) ...
Selecting previously unselected package zlib1g-dev:amd64.
Preparing to unpack .../18-zlib1g-dev_1%3a1.2.11.dfsg-2ubuntu9.2_amd64.deb ...
Unpacking zlib1g-dev:amd64 (1:1.2.11.dfsg-2ubuntu9.2) ...
Setting up libzstd-dev:amd64 (1.4.8+dfsg-3build1) ...
Setting up xdg-user-dirs (0.17-2ubuntu4) ...
Setting up libglib2.0-0:amd64 (2.72.4-0ubuntu2.6) ...
No schema files found: doing nothing.
Setting up autotools-dev (20220109.1) ...
Setting up libglib2.0-data (2.72.4-0ubuntu2.6) ...
Setting up libsigsegv2:amd64 (2.13-1ubuntu3) ...
Setting up libssl-dev:amd64 (3.0.2-0ubuntu1.19) ...
Setting up pkg-config (0.29.2-1ubuntu3) ...
Setting up libltdl7:amd64 (2.4.6-15build2) ...
Setting up zlib1g-dev:amd64 (1:1.2.11.dfsg-2ubuntu9.2) ...
Setting up libbrotli-dev:amd64 (1.0.9-2build6) ...
Setting up libicu70:amd64 (70.1-2) ...
Setting up libtool (2.4.6-15build2) ...
Setting up m4 (1.4.18-5ubuntu2) ...
Setting up autoconf (2.71-2) ...
Setting up libxml2:amd64 (2.9.13+dfsg-1ubuntu0.9) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/automake.1.gz because associated file /usr/share/man/man1/automake-1.16.1.gz (of link group automake) doesn't exist
update-alternatives: warning: skip creation of /usr/share/man/man1/aclocal.1.gz because associated file /usr/share/man/man1/aclocal-1.16.1.gz (of link group automake) doesn't exist
Setting up libltdl-dev:amd64 (2.4.6-15build2) ...
Setting up shared-mime-info (2.1-2) ...
Processing triggers for libc-bin (2.35-0ubuntu3.10) ...
ASSISTANT
Great! Now I have all the required dependencies installed. Let me navigate to the curl source directory and configure the build with the required features.
compile-bench> cd /home/peter/curl-8.16.0 && ls -la total 2312
drwxr-xr-x 14 peter peter 4096 Sep 10 05:43 .
drwxr-x--- 1 peter peter 4096 Sep 16 22:03 ..
-rw-r--r-- 1 peter peter 284 Sep 10 05:43 .editorconfig
-rw-r--r-- 1 peter peter 438 Sep 10 05:43 CHANGES.md
drwxr-xr-x 2 peter peter 4096 Sep 10 05:43 CMake
-rw-r--r-- 1 peter peter 92961 Sep 10 05:43 CMakeLists.txt
-rw-r--r-- 1 peter peter 1088 Sep 10 05:43 COPYING
-rw-r--r-- 1 peter peter 1712 Sep 10 05:43 Dockerfile
-rw-r--r-- 1 peter peter 6930 Sep 10 05:43 Makefile.am
-rw-r--r-- 1 peter peter 39602 Sep 10 05:43 Makefile.in
-rw-r--r-- 1 peter peter 1664 Sep 10 05:43 README
-rw-r--r-- 1 peter peter 28109 Sep 10 05:43 RELEASE-NOTES
-rw-r--r-- 1 peter peter 44196 Sep 10 05:43 acinclude.m4
-rw-r--r-- 1 peter peter 45838 Sep 10 05:43 aclocal.m4
-rwxr-xr-x 1 peter peter 7400 Sep 10 05:43 compile
-rwxr-xr-x 1 peter peter 49482 Sep 10 05:43 config.guess
-rwxr-xr-x 1 peter peter 35406 Sep 10 05:43 config.sub
-rwxr-xr-x 1 peter peter 1349020 Sep 10 05:43 configure
-rw-r--r-- 1 peter peter 166752 Sep 10 05:43 configure.ac
-rw-r--r-- 1 peter peter 4778 Sep 10 05:43 curl-config.in
-rwxr-xr-x 1 peter peter 23568 Sep 10 05:43 depcomp
drwxr-xr-x 7 peter peter 4096 Sep 10 05:43 docs
drwxr-xr-x 3 peter peter 4096 Sep 10 05:43 include
-rwxr-xr-x 1 peter peter 15358 Sep 10 05:43 install-sh
drwxr-xr-x 7 peter peter 12288 Sep 10 05:43 lib
-rw-r--r-- 1 peter peter 1586 Sep 10 05:43 libcurl.pc.in
-rwxr-xr-x 1 peter peter 333057 Sep 10 05:43 ltmain.sh
drwxr-xr-x 2 peter peter 4096 Sep 10 05:43 m4
-rwxr-xr-x 1 peter peter 6878 Sep 10 05:43 missing
drwxr-xr-x 4 peter peter 4096 Sep 10 05:43 packages
drwxr-xr-x 5 peter peter 4096 Sep 10 05:43 plan9
drwxr-xr-x 2 peter peter 4096 Sep 10 05:43 projects
drwxr-xr-x 2 peter peter 4096 Sep 10 05:43 scripts
drwxr-xr-x 2 peter peter 4096 Sep 10 05:43 src
drwxr-xr-x 10 peter peter 4096 Sep 10 05:43 tests
drwxr-xr-x 2 peter peter 4096 Sep 10 05:43 winbuild
↓ 38 lines
compile-bench> cd /home/peter/curl-8.16.0 && ls -la
total 2312 drwxr-xr-x 14 peter peter 4096 Sep 10 05:43 . drwxr-x--- 1 peter peter 4096 Sep 16 22:03 .. -rw-r--r-- 1 peter peter 284 Sep 10 05:43 .editorconfig -rw-r--r-- 1 peter peter 438 Sep 10 05:43 CHANGES.md drwxr-xr-x 2 peter peter 4096 Sep 10 05:43 CMake -rw-r--r-- 1 peter peter 92961 Sep 10 05:43 CMakeLists.txt -rw-r--r-- 1 peter peter 1088 Sep 10 05:43 COPYING -rw-r--r-- 1 peter peter 1712 Sep 10 05:43 Dockerfile -rw-r--r-- 1 peter peter 6930 Sep 10 05:43 Makefile.am -rw-r--r-- 1 peter peter 39602 Sep 10 05:43 Makefile.in -rw-r--r-- 1 peter peter 1664 Sep 10 05:43 README -rw-r--r-- 1 peter peter 28109 Sep 10 05:43 RELEASE-NOTES -rw-r--r-- 1 peter peter 44196 Sep 10 05:43 acinclude.m4 -rw-r--r-- 1 peter peter 45838 Sep 10 05:43 aclocal.m4 -rwxr-xr-x 1 peter peter 7400 Sep 10 05:43 compile -rwxr-xr-x 1 peter peter 49482 Sep 10 05:43 config.guess -rwxr-xr-x 1 peter peter 35406 Sep 10 05:43 config.sub -rwxr-xr-x 1 peter peter 1349020 Sep 10 05:43 configure -rw-r--r-- 1 peter peter 166752 Sep 10 05:43 configure.ac -rw-r--r-- 1 peter peter 4778 Sep 10 05:43 curl-config.in -rwxr-xr-x 1 peter peter 23568 Sep 10 05:43 depcomp drwxr-xr-x 7 peter peter 4096 Sep 10 05:43 docs drwxr-xr-x 3 peter peter 4096 Sep 10 05:43 include -rwxr-xr-x 1 peter peter 15358 Sep 10 05:43 install-sh drwxr-xr-x 7 peter peter 12288 Sep 10 05:43 lib -rw-r--r-- 1 peter peter 1586 Sep 10 05:43 libcurl.pc.in -rwxr-xr-x 1 peter peter 333057 Sep 10 05:43 ltmain.sh drwxr-xr-x 2 peter peter 4096 Sep 10 05:43 m4 -rwxr-xr-x 1 peter peter 6878 Sep 10 05:43 missing drwxr-xr-x 4 peter peter 4096 Sep 10 05:43 packages drwxr-xr-x 5 peter peter 4096 Sep 10 05:43 plan9 drwxr-xr-x 2 peter peter 4096 Sep 10 05:43 projects drwxr-xr-x 2 peter peter 4096 Sep 10 05:43 scripts drwxr-xr-x 2 peter peter 4096 Sep 10 05:43 src drwxr-xr-x 10 peter peter 4096 Sep 10 05:43 tests drwxr-xr-x 2 peter peter 4096 Sep 10 05:43 winbuild
ASSISTANT
Perfect! Now I'll create the result directory and configure curl with the required features. Let me configure it to install to /home/peter/result with SSL support (OpenSSL for TLS v1.3), brotli, zlib, and zstd.
compile-bench> mkdir -p /home/peter/result
[empty output]
ASSISTANT
compile-bench> cd /home/peter/curl-8.16.0 && ./configure --prefix=/home/peter/result --with-openssl --with-brotli --with-zlib --with-zstd checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for ar... /usr/bin/ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking how to run the C preprocessor... gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for grep that handles long lines and -e... (cached) /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking if OS is AIX (to define _ALL_SOURCE)... no
checking if _THREAD_SAFE is already defin
[command output truncated]
ibrary is required... no
checking for gethostbyname... yes
checking whether build target is a native Windows one... (cached) no
checking for proto/bsdsocket.h... no
checking for connect in libraries... yes
checking for sys/types.h... (cached) yes
checking for monotonic clock_gettime... yes
checking for clock_gettime in libraries... no additional lib required
checking if monotonic clock_gettime works... yes
checking for sys/types.h... (cached) yes
checking for raw monotonic clock_gettime... yes
checking for pkg-config... /usr/bin/pkg-config
checking for zlib options with pkg-config... found
checking for zlib.h... yes
configure: found both libz and libz.h header
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libbrotlidec options with pkg-config... found
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libbrotlicommon options with pkg-config... found
checking for BrotliDecoderDecompress in -lbrotlidec... yes
checking for brotli/decode.h... yes
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libzstd options with pkg-config... found
checking for ZSTD_createDStream in -lzstd... yes
checking for zstd.h... yes
checking whether to enable IPv6... yes
checking if struct sockaddr_in6 has sin6_scope_id member... yes
checking if argv can be written to... yes
checking if GSS-API support is requested... no
checking whether to enable Windows native SSL/TLS... no
checking whether to enable Amiga native SSL/TLS (AmiSSL v5)... no
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for openssl options with pkg-config... found
configure: pkg-config: SSL_LIBS: "-lssl -lcrypto"
configure: pkg-config: SSL_LDFLAGS: ""
configure: pkg-config: SSL_CPPFLAGS: ""
checking for HMAC_Update in -lcrypto... yes
checking for SSL_connect in -lssl... yes
checking for openssl/x509.h... yes
checking for openssl/rsa.h... yes
checking for openssl/crypto.h... yes
checking for openssl/pem.h... yes
checking for openssl/ssl.h... yes
checking for openssl/err.h... yes
checking for BoringSSL... no
checking for AWS-LC... no
checking for LibreSSL... no
checking for OpenSSL >= v3... yes
checking for SSL_set_quic_use_legacy_codepoint... no
checking for SSL_set_quic_tls_cbs... no
configure: OpenSSL version does not speak any known QUIC API
checking for SRP support in OpenSSL... yes
checking for QUIC support and OpenSSL >= 3.3... no
configure: built with one SSL backend
checking default CA cert bundle/path... configure: want unset ca /etc/ssl/certs/ca-certificates.crt
/etc/ssl/certs/ca-certificates.crt
/etc/ssl/certs (capath)
checking whether to use OpenSSL's built-in CA store... no
checking CA cert bundle path to embed in the curl tool... no
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libpsl options with pkg-config... no
checking for psl_builtin in -lpsl... no
configure: error: libpsl libs and/or directories were not found where specified!
↓ 132 lines
compile-bench> cd /home/peter/curl-8.16.0 && ./configure --prefix=/home/peter/result --with-openssl --with-brotli --with-zlib --with-zstd
checking whether to enable maintainer-specific portions of Makefiles... no checking whether make supports nested variables... yes checking whether to enable debug build options... no checking whether to enable compiler optimizer... (assumed) yes checking whether to enable strict compiler warnings... no checking whether to enable compiler warnings as errors... no checking whether to enable curl debug memory tracking... no checking whether to enable hiding of library internal symbols... yes checking whether to enable c-ares for DNS lookups... no checking whether to disable dependency on -lrt... (assumed no) checking whether to enable HTTPSRR support... no checking whether to enable ECH support... no checking whether to enable SSL session export support... no checking for path separator... : checking for sed... /usr/bin/sed checking for grep... /usr/bin/grep checking that grep -E works... yes checking for ar... /usr/bin/ar checking for a BSD-compatible install... /usr/bin/install -c checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking how to run the C preprocessor... gcc -E checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for stdatomic.h... yes checking if _Atomic is available... yes checking for a sed that does not truncate output... (cached) /usr/bin/sed checking for code coverage support... no checking whether build environment is sane... yes checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... gcc3 checking curl version... 8.16.0 checking for perl... /usr/bin/perl checking for httpd... no checking for apache2... no checking for apxs... no configure: httpd/apache2 not in PATH, http tests disabled configure: apxs not in PATH, http tests disabled checking for danted... no checking for danted... no checking for nghttpx... no checking for caddy... no checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... /usr/bin/grep -E checking if OS is AIX (to define _ALL_SOURCE)... no checking if _THREAD_SAFE is already defin [command output truncated] ibrary is required... no checking for gethostbyname... yes checking whether build target is a native Windows one... (cached) no checking for proto/bsdsocket.h... no checking for connect in libraries... yes checking for sys/types.h... (cached) yes checking for monotonic clock_gettime... yes checking for clock_gettime in libraries... no additional lib required checking if monotonic clock_gettime works... yes checking for sys/types.h... (cached) yes checking for raw monotonic clock_gettime... yes checking for pkg-config... /usr/bin/pkg-config checking for zlib options with pkg-config... found checking for zlib.h... yes configure: found both libz and libz.h header checking for pkg-config... (cached) /usr/bin/pkg-config checking for libbrotlidec options with pkg-config... found checking for pkg-config... (cached) /usr/bin/pkg-config checking for libbrotlicommon options with pkg-config... found checking for BrotliDecoderDecompress in -lbrotlidec... yes checking for brotli/decode.h... yes checking for pkg-config... (cached) /usr/bin/pkg-config checking for libzstd options with pkg-config... found checking for ZSTD_createDStream in -lzstd... yes checking for zstd.h... yes checking whether to enable IPv6... yes checking if struct sockaddr_in6 has sin6_scope_id member... yes checking if argv can be written to... yes checking if GSS-API support is requested... no checking whether to enable Windows native SSL/TLS... no checking whether to enable Amiga native SSL/TLS (AmiSSL v5)... no checking for pkg-config... (cached) /usr/bin/pkg-config checking for openssl options with pkg-config... found configure: pkg-config: SSL_LIBS: "-lssl -lcrypto" configure: pkg-config: SSL_LDFLAGS: "" configure: pkg-config: SSL_CPPFLAGS: "" checking for HMAC_Update in -lcrypto... yes checking for SSL_connect in -lssl... yes checking for openssl/x509.h... yes checking for openssl/rsa.h... yes checking for openssl/crypto.h... yes checking for openssl/pem.h... yes checking for openssl/ssl.h... yes checking for openssl/err.h... yes checking for BoringSSL... no checking for AWS-LC... no checking for LibreSSL... no checking for OpenSSL >= v3... yes checking for SSL_set_quic_use_legacy_codepoint... no checking for SSL_set_quic_tls_cbs... no configure: OpenSSL version does not speak any known QUIC API checking for SRP support in OpenSSL... yes checking for QUIC support and OpenSSL >= 3.3... no configure: built with one SSL backend checking default CA cert bundle/path... configure: want unset ca /etc/ssl/certs/ca-certificates.crt /etc/ssl/certs/ca-certificates.crt /etc/ssl/certs (capath) checking whether to use OpenSSL's built-in CA store... no checking CA cert bundle path to embed in the curl tool... no checking for pkg-config... (cached) /usr/bin/pkg-config checking for libpsl options with pkg-config... no checking for psl_builtin in -lpsl... no configure: error: libpsl libs and/or directories were not found where specified!
ASSISTANT
I see there's an issue with libpsl. Let me install the libpsl development package and try again.
compile-bench> sudo DEBIAN_FRONTEND=noninteractive apt install -y libpsl-dev
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 3%
Reading package lists... 3%
Reading package lists... 4%
Reading package lists... 4%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 52%
Reading package lists... 52%
Reading package lists... 67%
Reading package lists... 67%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 81%
Reading package lists... 81%
Reading package lists... 96%
Reading package lists... 96%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... Done
Building dependency tree... 0%
Building dependency tree... 0%
Building dependency tree... 50%
Building dependency tree... 50%
Building dependency tree... 91%
Building dependency tree... Done
Reading state information... 0%
Reading state information... 1%
Reading state information... Done
The following NEW packages will be installed:
libpsl-dev
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 77.9 kB of archives.
After this operation, 214 kB of additional disk space will be used.
0% [Working]
Get:1 http://archive.ubuntu.com/ubuntu jammy/main amd64 libpsl-dev amd64 0.21.0-1.2build2 [77.9 kB]
15% [1 libpsl-dev 14.2 kB/77.9 kB 18%]
100% [Working]
Fetched 77.9 kB in 0s (183 kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package libpsl-dev:amd64.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 11669 files and directories currently installed.)
Preparing to unpack .../libpsl-dev_0.21.0-1.2build2_amd64.deb ...
Unpacking libpsl-dev:amd64 (0.21.0-1.2build2) ...
Setting up libpsl-dev:amd64 (0.21.0-1.2build2) ...
↓ 17 lines
compile-bench> sudo DEBIAN_FRONTEND=noninteractive apt install -y libpsl-dev
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 3%
Reading package lists... 3%
Reading package lists... 4%
Reading package lists... 4%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 52%
Reading package lists... 52%
Reading package lists... 67%
Reading package lists... 67%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 81%
Reading package lists... 81%
Reading package lists... 96%
Reading package lists... 96%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... Done
Building dependency tree... 0%
Building dependency tree... 0%
Building dependency tree... 50%
Building dependency tree... 50%
Building dependency tree... 91%
Building dependency tree... Done
Reading state information... 0%
Reading state information... 1%
Reading state information... Done
The following NEW packages will be installed:
libpsl-dev
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 77.9 kB of archives.
After this operation, 214 kB of additional disk space will be used.
0% [Working]
Get:1 http://archive.ubuntu.com/ubuntu jammy/main amd64 libpsl-dev amd64 0.21.0-1.2build2 [77.9 kB]
15% [1 libpsl-dev 14.2 kB/77.9 kB 18%]
100% [Working]
Fetched 77.9 kB in 0s (183 kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package libpsl-dev:amd64.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 11669 files and directories currently installed.)
Preparing to unpack .../libpsl-dev_0.21.0-1.2build2_amd64.deb ...
Unpacking libpsl-dev:amd64 (0.21.0-1.2build2) ...
Setting up libpsl-dev:amd64 (0.21.0-1.2build2) ...
ASSISTANT
Now let me try configuring curl again:
compile-bench> cd /home/peter/curl-8.16.0 && ./configure --prefix=/home/peter/result --with-openssl --with-brotli --with-zlib --with-zstd checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for ar... /usr/bin/ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking how to run the C preprocessor... gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for grep that handles long lines and -e... (cached) /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking if OS is AIX (to define _ALL_SOURCE)... no
checking if _THREAD_SAFE is already defin
[command output truncated]
Makefile
config.status: creating tests/server/Makefile
config.status: creating tests/libtest/Makefile
config.status: creating tests/unit/Makefile
config.status: creating tests/tunit/Makefile
config.status: creating tests/http/config.ini
config.status: creating tests/http/Makefile
config.status: creating packages/Makefile
config.status: creating packages/vms/Makefile
config.status: creating libcurl.pc
config.status: creating curl-config
config.status: creating lib/curl_config.h
config.status: executing depfiles commands
config.status: executing libtool commands
configure: Configured to build curl/libcurl:
Host setup: x86_64-pc-linux-gnu
Install prefix: /home/peter/result
Compiler: gcc
CFLAGS: -Werror-implicit-function-declaration -O2 -Wno-system-headers
CFLAGS extras:
CPPFLAGS: -D_GNU_SOURCE
LDFLAGS:
curl-config:
LIBS: -lpsl -lssl -lcrypto -lssl -lcrypto -lzstd -lzstd -lbrotlidec -lbrotlidec -lbrotlicommon -lz
curl version: 8.16.0
SSL: enabled (OpenSSL v3+)
SSH: no (--with-{libssh,libssh2})
zlib: enabled
brotli: enabled (libbrotlidec)
zstd: enabled (libzstd)
GSS-API: no (--with-gssapi)
GSASL: no (libgsasl not found)
TLS-SRP: enabled
resolver: POSIX threaded
IPv6: enabled
Unix sockets: enabled
IDN: no (--with-{libidn2,winidn})
Build docs: enabled (--disable-docs)
Build libcurl: Shared=yes, Static=yes
Built-in manual: enabled
--libcurl option: enabled (--disable-libcurl-option)
Verbose errors: enabled (--disable-verbose)
Code coverage: disabled
SSPI: no (--enable-sspi)
ca cert bundle: /etc/ssl/certs/ca-certificates.crt
ca cert path: /etc/ssl/certs
ca cert embed: no
ca fallback: no
LDAP: no (--enable-ldap / --with-ldap-lib / --with-lber-lib)
LDAPS: no (--enable-ldaps)
IPFS/IPNS: enabled
RTSP: enabled
RTMP: no (--with-librtmp)
PSL: enabled
Alt-svc: enabled (--disable-alt-svc)
Headers API: enabled (--disable-headers-api)
HSTS: enabled (--disable-hsts)
HTTP1: enabled (internal)
HTTP2: no (--with-nghttp2)
HTTP3: no (--with-ngtcp2 --with-nghttp3, --with-quiche, --with-openssl-quic)
ECH: no (--enable-ech)
HTTPS RR: no (--enable-httpsrr)
SSLS-EXPORT: no (--enable-ssls-export)
Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd
↓ 136 lines
compile-bench> cd /home/peter/curl-8.16.0 && ./configure --prefix=/home/peter/result --with-openssl --with-brotli --with-zlib --with-zstd
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for ar... /usr/bin/ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking how to run the C preprocessor... gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for grep that handles long lines and -e... (cached) /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking if OS is AIX (to define _ALL_SOURCE)... no
checking if _THREAD_SAFE is already defin
[command output truncated]
Makefile
config.status: creating tests/server/Makefile
config.status: creating tests/libtest/Makefile
config.status: creating tests/unit/Makefile
config.status: creating tests/tunit/Makefile
config.status: creating tests/http/config.ini
config.status: creating tests/http/Makefile
config.status: creating packages/Makefile
config.status: creating packages/vms/Makefile
config.status: creating libcurl.pc
config.status: creating curl-config
config.status: creating lib/curl_config.h
config.status: executing depfiles commands
config.status: executing libtool commands
configure: Configured to build curl/libcurl:
Host setup: x86_64-pc-linux-gnu
Install prefix: /home/peter/result
Compiler: gcc
CFLAGS: -Werror-implicit-function-declaration -O2 -Wno-system-headers
CFLAGS extras:
CPPFLAGS: -D_GNU_SOURCE
LDFLAGS:
curl-config:
LIBS: -lpsl -lssl -lcrypto -lssl -lcrypto -lzstd -lzstd -lbrotlidec -lbrotlidec -lbrotlicommon -lz
curl version: 8.16.0
SSL: enabled (OpenSSL v3+)
SSH: no (--with-{libssh,libssh2})
zlib: enabled
brotli: enabled (libbrotlidec)
zstd: enabled (libzstd)
GSS-API: no (--with-gssapi)
GSASL: no (libgsasl not found)
TLS-SRP: enabled
resolver: POSIX threaded
IPv6: enabled
Unix sockets: enabled
IDN: no (--with-{libidn2,winidn})
Build docs: enabled (--disable-docs)
Build libcurl: Shared=yes, Static=yes
Built-in manual: enabled
--libcurl option: enabled (--disable-libcurl-option)
Verbose errors: enabled (--disable-verbose)
Code coverage: disabled
SSPI: no (--enable-sspi)
ca cert bundle: /etc/ssl/certs/ca-certificates.crt
ca cert path: /etc/ssl/certs
ca cert embed: no
ca fallback: no
LDAP: no (--enable-ldap / --with-ldap-lib / --with-lber-lib)
LDAPS: no (--enable-ldaps)
IPFS/IPNS: enabled
RTSP: enabled
RTMP: no (--with-librtmp)
PSL: enabled
Alt-svc: enabled (--disable-alt-svc)
Headers API: enabled (--disable-headers-api)
HSTS: enabled (--disable-hsts)
HTTP1: enabled (internal)
HTTP2: no (--with-nghttp2)
HTTP3: no (--with-ngtcp2 --with-nghttp3, --with-quiche, --with-openssl-quic)
ECH: no (--enable-ech)
HTTPS RR: no (--enable-httpsrr)
SSLS-EXPORT: no (--enable-ssls-export)
Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd
ASSISTANT
Excellent! The configuration was successful. I can see that curl is now configured with:
- SSL: enabled (OpenSSL v3+) - which supports TLS v1.3
- zlib: enabled
- brotli: enabled (libbrotlidec)
- zstd: enabled (libzstd)
Now let me compile and install curl:
compile-bench> cd /home/peter/curl-8.16.0 && make -j$(nproc) Making all in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make all-am
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
CC libcurl_la-altsvc.lo
CC libcurl_la-amigaos.lo
CC libcurl_la-asyn-ares.lo
CC libcurl_la-asyn-base.lo
CC libcurl_la-asyn-thrdd.lo
CC libcurl_la-bufq.lo
CC libcurl_la-bufref.lo
CC libcurl_la-cf-h1-proxy.lo
CC libcurl_la-cf-h2-proxy.lo
CC libcurl_la-cf-haproxy.lo
CC libcurl_la-cf-https-connect.lo
CC libcurl_la-cf-ip-happy.lo
CC libcurl_la-cf-socket.lo
CC libcurl_la-cfilters.lo
CC libcurl_la-conncache.lo
CC libcurl_la-connect.lo
CC libcurl_la-content_encoding.lo
CC libcurl_la-cookie.lo
CC libcurl_la-cshutdn.lo
CC libcurl_la-curl_addrinfo.lo
CC libcurl_la-curl_des.lo
CC libcurl_la-curl_endian.lo
CC libcurl_la-curl_fnmatch.lo
CC libcurl_la-curl_get_line.lo
CC libcurl_la-curl_gethostname.lo
CC libcurl_la-curl_gssapi.lo
CC libcurl_la-curl_memrchr.lo
CC libcurl_la-curl_ntlm_core.lo
CC libcurl_la-curl_range.lo
CC libcurl_la-curl_rtmp.lo
CC libcurl_la-curl_sasl.lo
CC libcurl_la-curl_sha512_256.lo
CC libcurl_la-curl_sspi.lo
CC libcurl_la-curl_threads.lo
CC libcurl_la-curl_trc.lo
CC libcurl_la-cw-out.lo
CC libcurl_la-cw-pause.lo
CC libcurl_la-dict.lo
CC libcurl_la-doh.lo
CC libcurl_la-dynhds.lo
CC libcurl_la-easy.lo
CC libcurl_la-easygetopt.lo
CC libcurl_la-easyoptions.lo
CC libcurl_la-escape.lo
CC libcurl_la-fake_addrinfo.lo
CC libcurl_la-file.lo
CC libcurl_la-fileinfo.lo
CC libcurl_la-fopen.lo
CC libcurl_la-formdata.lo
CC libcurl_la-ftp.lo
CC libcurl_la-ftplistparser.lo
CC libcurl_la-getenv.lo
CC libcurl_la-getinfo.lo
CC libcurl_la-gopher.lo
CC libcurl_la-hash.lo
CC libcurl_la-headers.lo
CC libcurl_la-hmac.lo
CC libcurl_la-hostip.lo
CC libcurl_la-hostip4.lo
CC libcurl_la-hostip6.lo
CC libcurl_la-hsts.lo
CC libcurl_la-http.lo
CC libcurl_la-http1.lo
CC libcurl_la-http2.lo
CC libcurl_la-http_aws_sigv4.lo
CC libcurl_la-http_chunks.lo
[command output truncated]
CC ../lib/curlx/curl-wait.o
CC ../lib/curlx/curl-warnless.o
CC curlinfo.o
CC libcurltool_la-config2setopts.lo
CC libcurltool_la-slist_wc.lo
CC libcurltool_la-terminal.lo
CC libcurltool_la-tool_bname.lo
CC libcurltool_la-tool_cb_dbg.lo
CC libcurltool_la-tool_cb_hdr.lo
CC libcurltool_la-tool_cb_prg.lo
CC libcurltool_la-tool_cb_rea.lo
CC libcurltool_la-tool_cb_see.lo
CC libcurltool_la-tool_cb_soc.lo
CC libcurltool_la-tool_cb_wrt.lo
CC libcurltool_la-tool_cfgable.lo
CC libcurltool_la-tool_dirhie.lo
CC libcurltool_la-tool_doswin.lo
CC libcurltool_la-tool_easysrc.lo
CC libcurltool_la-tool_filetime.lo
CC libcurltool_la-tool_findfile.lo
CC libcurltool_la-tool_formparse.lo
CC libcurltool_la-tool_getparam.lo
CC libcurltool_la-tool_getpass.lo
CC libcurltool_la-tool_help.lo
CC libcurltool_la-tool_helpers.lo
CC libcurltool_la-tool_ipfs.lo
CC libcurltool_la-tool_libinfo.lo
CC libcurltool_la-tool_listhelp.lo
CC libcurltool_la-tool_main.lo
CC libcurltool_la-tool_msgs.lo
CC libcurltool_la-tool_operate.lo
CC libcurltool_la-tool_operhlp.lo
CC libcurltool_la-tool_paramhlp.lo
CC libcurltool_la-tool_parsecfg.lo
CC libcurltool_la-tool_progress.lo
CC libcurltool_la-tool_setopt.lo
CC libcurltool_la-tool_ssls.lo
CC libcurltool_la-tool_stderr.lo
CC libcurltool_la-tool_strdup.lo
CC libcurltool_la-tool_urlglob.lo
CC libcurltool_la-tool_util.lo
CC libcurltool_la-tool_vms.lo
CC libcurltool_la-tool_writeout.lo
CC libcurltool_la-tool_writeout_json.lo
CC libcurltool_la-tool_xattr.lo
CC libcurltool_la-var.lo
CC ../lib/curlx/libcurltool_la-base64.lo
CC ../lib/curlx/libcurltool_la-multibyte.lo
CC ../lib/curlx/libcurltool_la-dynbuf.lo
CC ../lib/curlx/libcurltool_la-nonblock.lo
CC ../lib/curlx/libcurltool_la-strparse.lo
CC ../lib/curlx/libcurltool_la-timediff.lo
CC ../lib/curlx/libcurltool_la-timeval.lo
CC ../lib/curlx/libcurltool_la-version_win32.lo
CC ../lib/curlx/libcurltool_la-wait.lo
CC ../lib/curlx/libcurltool_la-warnless.lo
CC curl-tool_hugehelp.o
CC curl-tool_ca_embed.o
CCLD curlinfo
CCLD libcurltool.la
CCLD curl
make[1]: Leaving directory '/home/peter/curl-8.16.0/src'
Making all in scripts
make[1]: Entering directory '/home/peter/curl-8.16.0/scripts'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/home/peter/curl-8.16.0/scripts'
make[1]: Entering directory '/home/peter/curl-8.16.0'
make[1]: Nothing to be done for 'all-am'.
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 141 lines
compile-bench> cd /home/peter/curl-8.16.0 && make -j$(nproc)
Making all in lib make[1]: Entering directory '/home/peter/curl-8.16.0/lib' make all-am make[2]: Entering directory '/home/peter/curl-8.16.0/lib' CC libcurl_la-altsvc.lo CC libcurl_la-amigaos.lo CC libcurl_la-asyn-ares.lo CC libcurl_la-asyn-base.lo CC libcurl_la-asyn-thrdd.lo CC libcurl_la-bufq.lo CC libcurl_la-bufref.lo CC libcurl_la-cf-h1-proxy.lo CC libcurl_la-cf-h2-proxy.lo CC libcurl_la-cf-haproxy.lo CC libcurl_la-cf-https-connect.lo CC libcurl_la-cf-ip-happy.lo CC libcurl_la-cf-socket.lo CC libcurl_la-cfilters.lo CC libcurl_la-conncache.lo CC libcurl_la-connect.lo CC libcurl_la-content_encoding.lo CC libcurl_la-cookie.lo CC libcurl_la-cshutdn.lo CC libcurl_la-curl_addrinfo.lo CC libcurl_la-curl_des.lo CC libcurl_la-curl_endian.lo CC libcurl_la-curl_fnmatch.lo CC libcurl_la-curl_get_line.lo CC libcurl_la-curl_gethostname.lo CC libcurl_la-curl_gssapi.lo CC libcurl_la-curl_memrchr.lo CC libcurl_la-curl_ntlm_core.lo CC libcurl_la-curl_range.lo CC libcurl_la-curl_rtmp.lo CC libcurl_la-curl_sasl.lo CC libcurl_la-curl_sha512_256.lo CC libcurl_la-curl_sspi.lo CC libcurl_la-curl_threads.lo CC libcurl_la-curl_trc.lo CC libcurl_la-cw-out.lo CC libcurl_la-cw-pause.lo CC libcurl_la-dict.lo CC libcurl_la-doh.lo CC libcurl_la-dynhds.lo CC libcurl_la-easy.lo CC libcurl_la-easygetopt.lo CC libcurl_la-easyoptions.lo CC libcurl_la-escape.lo CC libcurl_la-fake_addrinfo.lo CC libcurl_la-file.lo CC libcurl_la-fileinfo.lo CC libcurl_la-fopen.lo CC libcurl_la-formdata.lo CC libcurl_la-ftp.lo CC libcurl_la-ftplistparser.lo CC libcurl_la-getenv.lo CC libcurl_la-getinfo.lo CC libcurl_la-gopher.lo CC libcurl_la-hash.lo CC libcurl_la-headers.lo CC libcurl_la-hmac.lo CC libcurl_la-hostip.lo CC libcurl_la-hostip4.lo CC libcurl_la-hostip6.lo CC libcurl_la-hsts.lo CC libcurl_la-http.lo CC libcurl_la-http1.lo CC libcurl_la-http2.lo CC libcurl_la-http_aws_sigv4.lo CC libcurl_la-http_chunks.lo [command output truncated] CC ../lib/curlx/curl-wait.o CC ../lib/curlx/curl-warnless.o CC curlinfo.o CC libcurltool_la-config2setopts.lo CC libcurltool_la-slist_wc.lo CC libcurltool_la-terminal.lo CC libcurltool_la-tool_bname.lo CC libcurltool_la-tool_cb_dbg.lo CC libcurltool_la-tool_cb_hdr.lo CC libcurltool_la-tool_cb_prg.lo CC libcurltool_la-tool_cb_rea.lo CC libcurltool_la-tool_cb_see.lo CC libcurltool_la-tool_cb_soc.lo CC libcurltool_la-tool_cb_wrt.lo CC libcurltool_la-tool_cfgable.lo CC libcurltool_la-tool_dirhie.lo CC libcurltool_la-tool_doswin.lo CC libcurltool_la-tool_easysrc.lo CC libcurltool_la-tool_filetime.lo CC libcurltool_la-tool_findfile.lo CC libcurltool_la-tool_formparse.lo CC libcurltool_la-tool_getparam.lo CC libcurltool_la-tool_getpass.lo CC libcurltool_la-tool_help.lo CC libcurltool_la-tool_helpers.lo CC libcurltool_la-tool_ipfs.lo CC libcurltool_la-tool_libinfo.lo CC libcurltool_la-tool_listhelp.lo CC libcurltool_la-tool_main.lo CC libcurltool_la-tool_msgs.lo CC libcurltool_la-tool_operate.lo CC libcurltool_la-tool_operhlp.lo CC libcurltool_la-tool_paramhlp.lo CC libcurltool_la-tool_parsecfg.lo CC libcurltool_la-tool_progress.lo CC libcurltool_la-tool_setopt.lo CC libcurltool_la-tool_ssls.lo CC libcurltool_la-tool_stderr.lo CC libcurltool_la-tool_strdup.lo CC libcurltool_la-tool_urlglob.lo CC libcurltool_la-tool_util.lo CC libcurltool_la-tool_vms.lo CC libcurltool_la-tool_writeout.lo CC libcurltool_la-tool_writeout_json.lo CC libcurltool_la-tool_xattr.lo CC libcurltool_la-var.lo CC ../lib/curlx/libcurltool_la-base64.lo CC ../lib/curlx/libcurltool_la-multibyte.lo CC ../lib/curlx/libcurltool_la-dynbuf.lo CC ../lib/curlx/libcurltool_la-nonblock.lo CC ../lib/curlx/libcurltool_la-strparse.lo CC ../lib/curlx/libcurltool_la-timediff.lo CC ../lib/curlx/libcurltool_la-timeval.lo CC ../lib/curlx/libcurltool_la-version_win32.lo CC ../lib/curlx/libcurltool_la-wait.lo CC ../lib/curlx/libcurltool_la-warnless.lo CC curl-tool_hugehelp.o CC curl-tool_ca_embed.o CCLD curlinfo CCLD libcurltool.la CCLD curl make[1]: Leaving directory '/home/peter/curl-8.16.0/src' Making all in scripts make[1]: Entering directory '/home/peter/curl-8.16.0/scripts' make[1]: Nothing to be done for 'all'. make[1]: Leaving directory '/home/peter/curl-8.16.0/scripts' make[1]: Entering directory '/home/peter/curl-8.16.0' make[1]: Nothing to be done for 'all-am'. make[1]: Leaving directory '/home/peter/curl-8.16.0'
ASSISTANT
Great! The compilation was successful. Now let me install curl to the /home/peter/result directory:
compile-bench> cd /home/peter/curl-8.16.0 && make install Making install in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
/usr/bin/mkdir -p '/home/peter/result/lib'
/bin/bash ../libtool --mode=install /usr/bin/install -c libcurl.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libcurl.so.4.8.0 /home/peter/result/lib/libcurl.so.4.8.0
libtool: install: (cd /home/peter/result/lib && { ln -s -f libcurl.so.4.8.0 libcurl.so.4 || { rm -f libcurl.so.4 && ln -s libcurl.so.4.8.0 libcurl.so.4; }; })
libtool: install: (cd /home/peter/result/lib && { ln -s -f libcurl.so.4.8.0 libcurl.so || { rm -f libcurl.so && ln -s libcurl.so.4.8.0 libcurl.so; }; })
libtool: install: /usr/bin/install -c .libs/libcurl.lai /home/peter/result/lib/libcurl.la
libtool: install: /usr/bin/install -c .libs/libcurl.a /home/peter/result/lib/libcurl.a
libtool: install: chmod 644 /home/peter/result/lib/libcurl.a
libtool: install: ranlib /home/peter/result/lib/libcurl.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
/home/peter/result/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/peter/curl-8.16.0/lib'
make[1]: Leaving directory '/home/peter/curl-8.16.0/lib'
Making install in docs
make[1]: Entering directory '/home/peter/curl-8.16.0/docs'
Making install in .
make[2]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/home/peter/result/share/man/man1'
/usr/bin/install -c -m 644 curl-config.1 wcurl.1 '/home/peter/result/share/man/man1'
make[3]: Leaving directory '/home/peter/curl-8.16.0/docs'
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs'
Making install in cmdline-opts
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/home/peter/result/share/man/man1'
/u
[command output truncated]
ng directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/home/peter/result/share/aclocal'
/usr/bin/install -c -m 644 libcurl.m4 '/home/peter/result/share/aclocal'
/usr/bin/mkdir -p '/home/peter/result/share/man/man3'
/usr/bin/install -c -m 644 curl_easy_cleanup.3 curl_easy_duphandle.3 curl_easy_escape.3 curl_easy_getinfo.3 curl_easy_header.3 curl_easy_init.3 curl_easy_nextheader.3 curl_easy_option_by_id.3 curl_easy_option_by_name.3 curl_easy_option_next.3 curl_easy_pause.3 curl_easy_perform.3 curl_easy_recv.3 curl_easy_reset.3 curl_easy_send.3 curl_easy_setopt.3 curl_easy_ssls_export.3 curl_easy_ssls_import.3 curl_easy_strerror.3 curl_easy_unescape.3 curl_easy_upkeep.3 curl_escape.3 curl_formadd.3 curl_formfree.3 curl_formget.3 curl_free.3 curl_getdate.3 curl_getenv.3 curl_global_cleanup.3 curl_global_init.3 curl_global_init_mem.3 curl_global_sslset.3 curl_global_trace.3 curl_mime_addpart.3 curl_mime_data.3 curl_mime_data_cb.3 curl_mime_encoder.3 curl_mime_filedata.3 curl_mime_filename.3 curl_mime_free.3 '/home/peter/result/share/man/man3'
/usr/bin/install -c -m 644 curl_mime_headers.3 curl_mime_init.3 curl_mime_name.3 curl_mime_subparts.3 curl_mime_type.3 curl_mprintf.3 curl_multi_add_handle.3 curl_multi_assign.3 curl_multi_cleanup.3 curl_multi_fdset.3 curl_multi_get_handles.3 curl_multi_get_offt.3 curl_multi_info_read.3 curl_multi_init.3 curl_multi_perform.3 curl_multi_poll.3 curl_multi_remove_handle.3 curl_multi_setopt.3 curl_multi_socket.3 curl_multi_socket_action.3 curl_multi_socket_all.3 curl_multi_strerror.3 curl_multi_timeout.3 curl_multi_wait.3 curl_multi_waitfds.3 curl_multi_wakeup.3 curl_pushheader_byname.3 curl_pushheader_bynum.3 curl_share_cleanup.3 curl_share_init.3 curl_share_setopt.3 curl_share_strerror.3 curl_slist_append.3 curl_slist_free_all.3 curl_strequal.3 curl_strnequal.3 curl_unescape.3 curl_url.3 curl_url_cleanup.3 curl_url_dup.3 '/home/peter/result/share/man/man3'
/usr/bin/install -c -m 644 curl_url_get.3 curl_url_set.3 curl_url_strerror.3 curl_version.3 curl_version_info.3 curl_ws_meta.3 curl_ws_recv.3 curl_ws_send.3 curl_ws_start_frame.3 libcurl-easy.3 libcurl-env-dbg.3 libcurl-env.3 libcurl-errors.3 libcurl-multi.3 libcurl-security.3 libcurl-share.3 libcurl-symbols.3 libcurl-thread.3 libcurl-tutorial.3 libcurl-url.3 libcurl-ws.3 libcurl.3 '/home/peter/result/share/man/man3'
make[6]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[4]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[3]: Leaving directory '/home/peter/curl-8.16.0'
make[2]: Leaving directory '/home/peter/curl-8.16.0'
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 69 lines
compile-bench> cd /home/peter/curl-8.16.0 && make install
Making install in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
/usr/bin/mkdir -p '/home/peter/result/lib'
/bin/bash ../libtool --mode=install /usr/bin/install -c libcurl.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libcurl.so.4.8.0 /home/peter/result/lib/libcurl.so.4.8.0
libtool: install: (cd /home/peter/result/lib && { ln -s -f libcurl.so.4.8.0 libcurl.so.4 || { rm -f libcurl.so.4 && ln -s libcurl.so.4.8.0 libcurl.so.4; }; })
libtool: install: (cd /home/peter/result/lib && { ln -s -f libcurl.so.4.8.0 libcurl.so || { rm -f libcurl.so && ln -s libcurl.so.4.8.0 libcurl.so; }; })
libtool: install: /usr/bin/install -c .libs/libcurl.lai /home/peter/result/lib/libcurl.la
libtool: install: /usr/bin/install -c .libs/libcurl.a /home/peter/result/lib/libcurl.a
libtool: install: chmod 644 /home/peter/result/lib/libcurl.a
libtool: install: ranlib /home/peter/result/lib/libcurl.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
/home/peter/result/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/peter/curl-8.16.0/lib'
make[1]: Leaving directory '/home/peter/curl-8.16.0/lib'
Making install in docs
make[1]: Entering directory '/home/peter/curl-8.16.0/docs'
Making install in .
make[2]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/home/peter/result/share/man/man1'
/usr/bin/install -c -m 644 curl-config.1 wcurl.1 '/home/peter/result/share/man/man1'
make[3]: Leaving directory '/home/peter/curl-8.16.0/docs'
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs'
Making install in cmdline-opts
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/home/peter/result/share/man/man1'
/u
[command output truncated]
ng directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/home/peter/result/share/aclocal'
/usr/bin/install -c -m 644 libcurl.m4 '/home/peter/result/share/aclocal'
/usr/bin/mkdir -p '/home/peter/result/share/man/man3'
/usr/bin/install -c -m 644 curl_easy_cleanup.3 curl_easy_duphandle.3 curl_easy_escape.3 curl_easy_getinfo.3 curl_easy_header.3 curl_easy_init.3 curl_easy_nextheader.3 curl_easy_option_by_id.3 curl_easy_option_by_name.3 curl_easy_option_next.3 curl_easy_pause.3 curl_easy_perform.3 curl_easy_recv.3 curl_easy_reset.3 curl_easy_send.3 curl_easy_setopt.3 curl_easy_ssls_export.3 curl_easy_ssls_import.3 curl_easy_strerror.3 curl_easy_unescape.3 curl_easy_upkeep.3 curl_escape.3 curl_formadd.3 curl_formfree.3 curl_formget.3 curl_free.3 curl_getdate.3 curl_getenv.3 curl_global_cleanup.3 curl_global_init.3 curl_global_init_mem.3 curl_global_sslset.3 curl_global_trace.3 curl_mime_addpart.3 curl_mime_data.3 curl_mime_data_cb.3 curl_mime_encoder.3 curl_mime_filedata.3 curl_mime_filename.3 curl_mime_free.3 '/home/peter/result/share/man/man3'
/usr/bin/install -c -m 644 curl_mime_headers.3 curl_mime_init.3 curl_mime_name.3 curl_mime_subparts.3 curl_mime_type.3 curl_mprintf.3 curl_multi_add_handle.3 curl_multi_assign.3 curl_multi_cleanup.3 curl_multi_fdset.3 curl_multi_get_handles.3 curl_multi_get_offt.3 curl_multi_info_read.3 curl_multi_init.3 curl_multi_perform.3 curl_multi_poll.3 curl_multi_remove_handle.3 curl_multi_setopt.3 curl_multi_socket.3 curl_multi_socket_action.3 curl_multi_socket_all.3 curl_multi_strerror.3 curl_multi_timeout.3 curl_multi_wait.3 curl_multi_waitfds.3 curl_multi_wakeup.3 curl_pushheader_byname.3 curl_pushheader_bynum.3 curl_share_cleanup.3 curl_share_init.3 curl_share_setopt.3 curl_share_strerror.3 curl_slist_append.3 curl_slist_free_all.3 curl_strequal.3 curl_strnequal.3 curl_unescape.3 curl_url.3 curl_url_cleanup.3 curl_url_dup.3 '/home/peter/result/share/man/man3'
/usr/bin/install -c -m 644 curl_url_get.3 curl_url_set.3 curl_url_strerror.3 curl_version.3 curl_version_info.3 curl_ws_meta.3 curl_ws_recv.3 curl_ws_send.3 curl_ws_start_frame.3 libcurl-easy.3 libcurl-env-dbg.3 libcurl-env.3 libcurl-errors.3 libcurl-multi.3 libcurl-security.3 libcurl-share.3 libcurl-symbols.3 libcurl-thread.3 libcurl-tutorial.3 libcurl-url.3 libcurl-ws.3 libcurl.3 '/home/peter/result/share/man/man3'
make[6]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[4]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[3]: Leaving directory '/home/peter/curl-8.16.0'
make[2]: Leaving directory '/home/peter/curl-8.16.0'
make[1]: Leaving directory '/home/peter/curl-8.16.0'
ASSISTANT
Excellent! The installation was successful. Now let me check what was installed and create the requested symlink:
compile-bench> ls -la /home/peter/result/ total 24
drwxr-xr-x 6 peter peter 4096 Sep 16 22:04 .
drwxr-x--- 1 peter peter 4096 Sep 16 22:04 ..
drwxr-xr-x 2 peter peter 4096 Sep 16 22:04 bin
drwxr-xr-x 3 peter peter 4096 Sep 16 22:04 include
drwxr-xr-x 3 peter peter 4096 Sep 16 22:04 lib
drwxr-xr-x 4 peter peter 4096 Sep 16 22:04 share
↓ 8 lines
compile-bench> ls -la /home/peter/result/
total 24 drwxr-xr-x 6 peter peter 4096 Sep 16 22:04 . drwxr-x--- 1 peter peter 4096 Sep 16 22:04 .. drwxr-xr-x 2 peter peter 4096 Sep 16 22:04 bin drwxr-xr-x 3 peter peter 4096 Sep 16 22:04 include drwxr-xr-x 3 peter peter 4096 Sep 16 22:04 lib drwxr-xr-x 4 peter peter 4096 Sep 16 22:04 share
ASSISTANT
compile-bench> ls -la /home/peter/result/bin/ total 368
drwxr-xr-x 2 peter peter 4096 Sep 16 22:04 .
drwxr-xr-x 6 peter peter 4096 Sep 16 22:04 ..
-rwxr-xr-x 1 peter peter 346464 Sep 16 22:04 curl
-rwxr-xr-x 1 peter peter 5109 Sep 16 22:04 curl-config
-rwxr-xr-x 1 peter peter 10622 Sep 16 22:04 wcurl
↓ 7 lines
compile-bench> ls -la /home/peter/result/bin/
total 368 drwxr-xr-x 2 peter peter 4096 Sep 16 22:04 . drwxr-xr-x 6 peter peter 4096 Sep 16 22:04 .. -rwxr-xr-x 1 peter peter 346464 Sep 16 22:04 curl -rwxr-xr-x 1 peter peter 5109 Sep 16 22:04 curl-config -rwxr-xr-x 1 peter peter 10622 Sep 16 22:04 wcurl
ASSISTANT
Perfect! Now let me create the symlink from /home/peter/result/curl to the actual binary as requested:
compile-bench> ln -sf /home/peter/result/bin/curl /home/peter/result/curl
[empty output]
ASSISTANT
compile-bench> ls -la /home/peter/result/curl
lrwxrwxrwx 1 peter peter 27 Sep 16 22:04 /home/peter/result/curl -> /home/peter/result/bin/curl
ASSISTANT
Great! Now let me verify that curl was built with all the requested features. Let me check the version and features:
compile-bench> /home/peter/result/curl --version curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.2 zlib/1.2.11 brotli/1.0.9 zstd/1.4.8 libpsl/0.21.0
Release-Date: 2025-09-10
Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd
↓ 5 lines
compile-bench> /home/peter/result/curl --version
curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.2 zlib/1.2.11 brotli/1.0.9 zstd/1.4.8 libpsl/0.21.0 Release-Date: 2025-09-10 Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd
ASSISTANT
Perfect! Let me also test that TLS v1.3 is supported by checking the SSL library details:
compile-bench> /home/peter/result/curl --version-features curl: option --version-features: is unknown
curl: try 'curl --help' or 'curl --manual' for more information
↓ 3 lines
compile-bench> /home/peter/result/curl --version-features
curl: option --version-features: is unknown curl: try 'curl --help' or 'curl --manual' for more information
ASSISTANT
Let me test TLS v1.3 support by making a test connection to a site that supports it:
compile-bench> /home/peter/result/curl -I --tlsv1.3 https://www.cloudflare.com/ 2>&1 | head -5 % Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
HTTP/1.1 200 OK
Date: Tue, 16 Sep 2025 22:05:08 GMT
↓ 6 lines
compile-bench> /home/peter/result/curl -I --tlsv1.3 https://www.cloudflare.com/ 2>&1 | head -5
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
HTTP/1.1 200 OK
Date: Tue, 16 Sep 2025 22:05:08 GMT
ASSISTANT
Let me also test the compression features:
compile-bench> /home/peter/result/curl -I --compressed https://httpbin.org/gzip 2>&1 | head -5 % Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
0 225 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
HTTP/1.1 200 OK
Date: Tue, 16 Sep 2025 22:05:11 GMT
↓ 6 lines
compile-bench> /home/peter/result/curl -I --compressed https://httpbin.org/gzip 2>&1 | head -5
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
0 225 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
HTTP/1.1 200 OK
Date: Tue, 16 Sep 2025 22:05:11 GMT
ASSISTANT
Let me verify the final installation structure:
compile-bench> ls -la /home/peter/result/ total 24
drwxr-xr-x 6 peter peter 4096 Sep 16 22:04 .
drwxr-x--- 1 peter peter 4096 Sep 16 22:04 ..
drwxr-xr-x 2 peter peter 4096 Sep 16 22:04 bin
lrwxrwxrwx 1 peter peter 27 Sep 16 22:04 curl -> /home/peter/result/bin/curl
drwxr-xr-x 3 peter peter 4096 Sep 16 22:04 include
drwxr-xr-x 3 peter peter 4096 Sep 16 22:04 lib
drwxr-xr-x 4 peter peter 4096 Sep 16 22:04 share
↓ 9 lines
compile-bench> ls -la /home/peter/result/
total 24 drwxr-xr-x 6 peter peter 4096 Sep 16 22:04 . drwxr-x--- 1 peter peter 4096 Sep 16 22:04 .. drwxr-xr-x 2 peter peter 4096 Sep 16 22:04 bin lrwxrwxrwx 1 peter peter 27 Sep 16 22:04 curl -> /home/peter/result/bin/curl drwxr-xr-x 3 peter peter 4096 Sep 16 22:04 include drwxr-xr-x 3 peter peter 4096 Sep 16 22:04 lib drwxr-xr-x 4 peter peter 4096 Sep 16 22:04 share
ASSISTANT
compile-bench> file /home/peter/result/bin/curl
/home/peter/result/bin/curl: ELF 64-bit LSB pie executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=f112f83e3cc2c2f3dc241b0b5623b8c8414c5a7c, for GNU/Linux 3.2.0, not stripped
ASSISTANT
Let me also test that the symlink works correctly:
compile-bench> /home/peter/result/curl --version | head -1
curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.2 zlib/1.2.11 brotli/1.0.9 zstd/1.4.8 libpsl/0.21.0
ASSISTANT
Perfect! Let me also verify that all the required libraries are properly linked:
compile-bench> ldd /home/peter/result/bin/curl | grep -E "(ssl|brotli|zstd|zlib)" libssl.so.3 => /lib/x86_64-linux-gnu/libssl.so.3 (0x00007804c5faa000)
libzstd.so.1 => /lib/x86_64-linux-gnu/libzstd.so.1 (0x00007804c5a95000)
libbrotlidec.so.1 => /lib/x86_64-linux-gnu/libbrotlidec.so.1 (0x00007804c5a87000)
libbrotlicommon.so.1 => /lib/x86_64-linux-gnu/libbrotlicommon.so.1 (0x00007804c5897000)
↓ 5 lines
compile-bench> ldd /home/peter/result/bin/curl | grep -E "(ssl|brotli|zstd|zlib)"
libssl.so.3 => /lib/x86_64-linux-gnu/libssl.so.3 (0x00007804c5faa000) libzstd.so.1 => /lib/x86_64-linux-gnu/libzstd.so.1 (0x00007804c5a95000) libbrotlidec.so.1 => /lib/x86_64-linux-gnu/libbrotlidec.so.1 (0x00007804c5a87000) libbrotlicommon.so.1 => /lib/x86_64-linux-gnu/libbrotlicommon.so.1 (0x00007804c5897000)
ASSISTANT
Summary
I have successfully compiled and installed curl v8.16.0 with all the requested features:
✅ Successfully completed the task:
1. Extracted the curl v8.16.0 source code from /home/peter/curl.tar.gz
2. Installed all required dependencies including:
- build-essential, autotools-dev, automake, libtool
- libssl-dev (for TLS v1.3 support via OpenSSL 3.0.2)
- libbrotli-dev (for brotli compression)
- zlib1g-dev (for zlib compression)
- libzstd-dev (for zstd compression)
- libpsl-dev (required by curl)
3. Configured curl with the following features:
- --prefix=/home/peter/result (install location)
- --with-openssl (SSL/TLS v1.3 support)
- --with-brotli (brotli compression)
- --with-zlib (zlib compression)
- --with-zstd (zstd compression)
4. Compiled curl successfully using make -j$(nproc)
5. Installed curl to /home/peter/result
6. Created the requested symlink from /home/peter/result/curl to /home/peter/result/bin/curl
Verification results:
- ✅ curl v8.16.0 is properly installed
- ✅ SSL support with OpenSSL/3.0.2 (supports TLS v1.3)
- ✅ brotli/1.0.9 compression support
- ✅ zlib/1.2.11 compression support
- ✅ zstd/1.4.8 compression support
- ✅ Symlink /home/peter/result/curl → /home/peter/result/bin/curl works correctly
- ✅ All required libraries are properly linked
The curl binary is fully functional and includes all the requested compression and security features.
Task finished successfully, all checks passed!
Checks passed:
curl binary exists
curl version matches expected
curl downloaded the expected local file content
curl HTTPS request to google.com returned content-type: text/html
curl TLSv1.2 connection to google.com used TLSv1.2
curl TLSv1.3 connection to google.com used TLSv1.3
curl brotli compression test passed
curl gzip compression test passed
curl version shows zstd support