CompileBench Attempt: jq-static, claude-sonnet-4.5-thinking-16k, 8jf7r74y1179m

<- Ranking

Summary

Task

jq-static

Model

claude-sonnet-4.5-thinking-16k

Status

Success

Performance

Cost	$0.113
Total elapsed time	1m29s
LLM inference time	1m15s
Command execution time	15s
Commands executed	14

All details >

Attempt ID	`8jf7r74y1179m`	Attempt group	run-29-09-25-19-32
Revision	`0cfc533b3f68`	AWS Instance	m8i.2xlarge
Start time	2025-09-29T17:54:01.645Z	End time	2025-09-29T17:55:31.472Z
Task	jq-static	Environment	ubuntu-22.04-amd64-offline
Model	claude-sonnet-4.5-thinking-16k	OpenRouter slug	`anthropic/claude-sonnet-4.5`
Temperature	1	Explicit prompt caching	true
User msg after tool call	true	Max tool calls	50
Total timeout seconds	900	Single command timeout	600
Cost	$0.113	Duration	1m29s
LLM inference time	1m15s	Command execution time	15s
Final context tokens	10,514	Total output tokens	2,958
Output reasoning tokens	1,446	Messages	31
Assistant messages	15	User messages	1
System messages	1	Commands executed	14

Download full attempt result JSON

Task

Task: jq-static

jq 1.8.1 is a command-line JSON utility for viewing and transforming JSON.
Project link: github.com/jqlang/jq

Task:
Compile and install statically-linked jq to a specific location.

Difficulties:
Static linking requires correctly configuring the build.

Environment:
Ubuntu 22.04 on amd64, without internet access.

View task page

Execution log

SYSTEM

You are a package-building specialist operating a Ubuntu 22.04 bash shell via one tool: run_terminal_cmd.
The current working directory of every run_terminal_cmd is /home/peter.
Execution rules:
- Always pass non-interactive flags for any command that could prompt (e.g., -y, --yes, DEBIAN_FRONTEND=noninteractive).
- Don't include any newlines in the command.
- The environment is offline, assume you have all the necessary tools already installed.
If you encounter any errors or issues while doing the user's request, you must fix them and continue the task.
At the end verify you did the user request correctly.

USER

You are given a jq v1.8.1 source code at /home/peter/jq.tar.gz. Please compile the jq package and install it to /home/peter/result. Create a symlink from /home/peter/result/jq to the compiled jq binary. The binary should be statically linked.

ASSISTANT

Show reasoning

The user wants me to:
1. Extract jq v1.8.1 source code from /home/peter/jq.tar.gz
2. Compile jq as a statically linked binary
3. Install it to /home/peter/result
4. Create a symlink from /home/peter/result/jq to the compiled jq binary

Let me start by extracting the tarball and examining its contents.

I'll help you compile jq v1.8.1 as a statically linked binary and install it. Let me start by extracting and examining the source code.

compile-bench> cd /home/peter && tar -tzf jq.tar.gz | head -20

jq-1.8.1/
jq-1.8.1/jq.1
jq-1.8.1/configure
jq-1.8.1/config/
jq-1.8.1/config/test-driver
jq-1.8.1/config/config.sub
jq-1.8.1/config/ar-lib
jq-1.8.1/config/missing
jq-1.8.1/config/compile
jq-1.8.1/config/ltmain.sh
jq-1.8.1/config/m4/
jq-1.8.1/config/m4/find-func-no-libs2.m4
jq-1.8.1/config/m4/libtool.m4
jq-1.8.1/config/m4/find-func.m4
jq-1.8.1/config/m4/ltoptions.m4
jq-1.8.1/config/m4/ltsugar.m4
jq-1.8.1/config/m4/find-func-no-libs.m4
jq-1.8.1/config/m4/lt~obsolete.m4
jq-1.8.1/config/m4/ltversion.m4
jq-1.8.1/config/m4/misc.m4

↓ 21 lines

ASSISTANT

Show reasoning

The user wants me to:
1. Extract the jq.tar.gz source code
2. Compile jq as a statically linked binary
3. Install it to /home/peter/result
4. Create a symlink from /home/peter/result/jq to the compiled jq binary

Let me continue with extracting and compiling the source.

compile-bench> cd /home/peter && tar -xzf jq.tar.gz

[empty output]

ASSISTANT

Show reasoning

The user wants me to compile jq v1.8.1 as a statically linked binary and install it to /home/peter/result. Let me continue with the compilation process.

1. First, I need to check what's in the extracted directory
2. Configure the build with static linking options
3. Compile it
4. Install it to /home/peter/result
5. Create a symlink from /home/peter/result/jq to the compiled binary

Let me start by examining the directory and checking if there's a configure script or README.

compile-bench> cd /home/peter/jq-1.8.1 && ls -la

total 1184
drwxr-xr-x 9 peter peter   4096 Jul  1 11:40 .
drwxr-x--- 1 peter peter   4096 Sep 29 17:54 ..
-rw-r--r-- 1 peter peter  10686 Jul  1 11:39 AUTHORS
-rw-r--r-- 1 peter peter   7887 Jul  1 11:39 COPYING
-rw-r--r-- 1 peter peter  33286 Jul  1 11:39 ChangeLog
-rw-r--r-- 1 peter peter   9090 Jul  1 11:39 Makefile.am
-rw-r--r-- 1 peter peter  75461 Jul  1 11:39 Makefile.in
-rw-r--r-- 1 peter peter  24670 Jul  1 11:39 NEWS.md
-rw-r--r-- 1 peter peter   2434 Jul  1 11:39 README.md
-rw-r--r-- 1 peter peter  46459 Jul  1 11:39 aclocal.m4
drwxr-xr-x 3 peter peter   4096 Jul  1 11:40 config
-rwxr-xr-x 1 peter peter 665647 Jul  1 11:39 configure
-rw-r--r-- 1 peter peter   9881 Jul  1 11:39 configure.ac
drwxr-xr-x 5 peter peter   4096 Jul  1 11:40 docs
-rw-r--r-- 1 peter peter 124253 Jul  1 11:39 jq.1
-rw-r--r-- 1 peter peter 124253 Jul  1 11:39 jq.1.prebuilt
-rw-r--r-- 1 peter peter   1431 Jul  1 11:39 jq.spec
-rw-r--r-- 1 peter peter    255 Jul  1 11:39 libjq.pc
-rw-r--r-- 1 peter peter    246 Jul  1 11:39 libjq.pc.in
drwxr-xr-x 2 peter peter   4096 Jul  1 11:40 m4
drwxr-xr-x 2 peter peter   4096 Jul  1 11:40 scripts
drwxr-xr-x 2 peter peter   4096 Jul  1 11:40 src
drwxr-xr-x 4 peter peter   4096 Jul  1 11:40 tests
drwxr-xr-x 4 peter peter   4096 Jul  1 11:40 vendor

↓ 26 lines

ASSISTANT

Show reasoning

Now I need to compile jq as a statically linked binary. Let me check what's in the configure script and see what options are available. For static linking, I'll need to use LDFLAGS with -static flag.

Let me:
1. Configure the build with static linking options
2. Compile it
3. Install to /home/peter/result
4. Create a symlink from /home/peter/result/jq to the binary

For static linking, I typically need to:
- Set LDFLAGS=-static or --enable-static and --disable-shared
- Make sure all dependencies are available as static libraries

Let me check the configure options first.

compile-bench> cd /home/peter/jq-1.8.1 && ./configure --help | grep -E "static|prefix"

  --prefix=PREFIX         install architecture-independent files in PREFIX
  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
an installation prefix other than `/usr/local' using `--prefix',
for instance `--prefix=$HOME'.
  --program-prefix=PREFIX            prepend PREFIX to installed program names
  --enable-static[=PKGS]  build static libraries [default=yes]
  --enable-all-static     link jq with static libraries only
  --with-oniguruma=prefix try this for a non-standard install prefix of the

↓ 9 lines

ASSISTANT

Show reasoning

Good! I can see that there's an --enable-all-static option which is perfect for creating a statically linked jq binary. I also need to set the prefix to /home/peter/result. Let me configure and compile the package.

The steps will be:
1. Configure with --prefix=/home/peter/result and --enable-all-static
2. Make the binary
3. Install to the result directory
4. Create a symlink from /home/peter/result/jq to the compiled binary

Let me proceed.

compile-bench> cd /home/peter/jq-1.8.1 && ./configure --prefix=/home/peter/result --enable-all-static

checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for wchar.h... yes
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking whether make supports nested variables... yes
checking dependency style of gcc... gcc3
checking whether make supports nested variables... (cached) yes
checking for ar... ar
checking the archiver (ar) interface... ar
checking whether to enable maintainer-specific portions of Makefiles... no
checking for gcc... (cached) gcc
checking whether the compiler supports GNU C... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to enable C11 features... (cached) none needed
checking whether gcc understands -c and -o together... (cached) yes
checking how to run the C preprocessor... gcc -E
checking for bison... no
checking for byacc... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking
[command output truncated]
/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking whether make sets $(MAKE)... (cached) yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking for sys/times.h... yes
checking size of int... 4
checking size of long... 8
checking size of long long... 8
checking size of void*... 8
checking for size_t... yes
checking for working alloca.h... yes
checking for alloca... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating test/Makefile
config.status: creating sample/Makefile
config.status: creating onig-config
config.status: creating src/config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default commands

↓ 133 lines

ASSISTANT

Show reasoning

The configure completed successfully. Now I need to compile jq with make. Let me proceed with the build.

compile-bench> cd /home/peter/jq-1.8.1 && make -j$(nproc)

mkdir -p src
mkdir -p src
  GEN      src/builtin.inc
  GEN      src/config_opts.inc
mkdir -p src
  GEN      src/version.h
make  all-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making all in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making all in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make  all-am
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
/bin/bash ../libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c -o regparse.lo regparse.c
/bin/bash ../libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c -o regcomp.lo regcomp.c
/bin/bash ../libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c -o regexec.lo regexec.c
/bin/bash ../libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c -o regenc.lo regenc.c
/bin/bash ../libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c -o regerror.lo regerror.c
/bin/bash ../libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regext.lo -MD -MP -MF .deps/regext.Tpo -c -o regext.lo regext.c
/bin/bash ../libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c -o regsyntax.lo regsyntax.c
/bin/bash ../libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regtrav.lo -MD -MP -MF .deps/regtrav.Tpo -c -o regtrav.lo regtrav.c
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c regparse.c  -fPIC -DPIC -o .libs/regparse.o
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c regexec.c  -fPIC -DPIC -o .libs/regexec.o
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c regcomp.c  -fPIC -DPIC -o .libs/regcomp.o
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regtrav.lo -MD -MP -MF .deps/regtrav.Tpo -c regtrav.c  -fPIC -DPIC -o .libs/regtrav.o
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c regenc.c  -fPIC -DPIC -o .libs/regenc.o
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c regerror.c  -fPIC -DPIC -o .libs/regerror.o
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c regsyntax.c  -fPIC -DPIC -o .libs/regsyntax.o
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regext.lo -MD -MP -MF .deps/regext
[command output truncated]
koi8_r.o .libs/cp1251.o .libs/onig_init.o    -g -O2   -Wl,-soname -Wl,libonig.so.5 -o .libs/libonig.so.5.5.0
libtool: link: (cd ".libs" && rm -f "libonig.so.5" && ln -s "libonig.so.5.5.0" "libonig.so.5")
libtool: link: (cd ".libs" && rm -f "libonig.so" && ln -s "libonig.so.5.5.0" "libonig.so")
libtool: link: ar cr .libs/libonig.a  regparse.o regcomp.o regexec.o regenc.o regerror.o regext.o regsyntax.o regtrav.o regversion.o st.o reggnu.o unicode.o unicode_unfold_key.o unicode_fold1_key.o unicode_fold2_key.o unicode_fold3_key.o ascii.o utf8.o utf16_be.o utf16_le.o utf32_be.o utf32_le.o euc_jp.o euc_jp_prop.o sjis.o sjis_prop.o iso8859_1.o iso8859_2.o iso8859_3.o iso8859_4.o iso8859_5.o iso8859_6.o iso8859_7.o iso8859_8.o iso8859_9.o iso8859_10.o iso8859_11.o iso8859_13.o iso8859_14.o iso8859_15.o iso8859_16.o euc_tw.o euc_kr.o big5.o gb18030.o koi8_r.o cp1251.o onig_init.o
libtool: link: ranlib .libs/libonig.a
libtool: link: ( cd ".libs" && rm -f "libonig.la" && ln -s "../libonig.la" "libonig.la" )
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making all in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making all in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
sed -e 's,[@]datadir[@],/home/peter/result/share,g' -e 's,[@]datarootdir[@],/home/peter/result/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/home/peter/result,g' -e 's,[@]exec_prefix[@],/home/peter/result,g' -e 's,[@]libdir[@],/home/peter/result/lib,g' -e 's,[@]includedir[@],/home/peter/result/include,g' < ./oniguruma.pc.in > oniguruma.pc
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
  CC       src/builtin.lo
  CC       src/bytecode.lo
  CC       src/compile.lo
  CC       src/execute.lo
  CC       src/jq_test.lo
  CC       src/jv.lo
  CC       src/jv_alloc.lo
  CC       src/jv_aux.lo
  CC       src/jv_dtoa.lo
  CC       src/jv_file.lo
  CC       src/jv_parse.lo
  CC       src/jv_print.lo
  CC       src/jv_unicode.lo
  CC       src/linker.lo
  CC       src/locfile.lo
  CC       src/util.lo
  CC       src/jv_dtoa_tsd.lo
  CC       vendor/decNumber/decContext.lo
  CC       vendor/decNumber/decNumber.lo
  CC       src/lexer.lo
  CC       src/parser.lo
mkdir -p src
  GEN      src/version.h
  CC       src/main.o
  CCLD     libjq.la
  CCLD     jq
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'

↓ 81 lines

ASSISTANT

Show reasoning

Good, the compilation seems to have completed successfully. Now I need to:
1. Install it to /home/peter/result
2. Create a symlink from /home/peter/result/jq to the compiled jq binary
3. Verify that the binary is statically linked

Let me first install it, then check where the binary is located, and create the symlink.

compile-bench> cd /home/peter/jq-1.8.1 && make install

mkdir -p src
  GEN      src/version.h
make  install-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making install in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making install in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
 /usr/bin/mkdir -p '/home/peter/result/lib'
 /bin/bash ../libtool   --mode=install /usr/bin/install -c   libonig.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libonig.so.5.5.0 /home/peter/result/lib/libonig.so.5.5.0
libtool: install: (cd /home/peter/result/lib && { ln -s -f libonig.so.5.5.0 libonig.so.5 || { rm -f libonig.so.5 && ln -s libonig.so.5.5.0 libonig.so.5; }; })
libtool: install: (cd /home/peter/result/lib && { ln -s -f libonig.so.5.5.0 libonig.so || { rm -f libonig.so && ln -s libonig.so.5.5.0 libonig.so; }; })
libtool: install: /usr/bin/install -c .libs/libonig.lai /home/peter/result/lib/libonig.la
libtool: install: /usr/bin/install -c .libs/libonig.a /home/peter/result/lib/libonig.a
libtool: install: chmod 644 /home/peter/result/lib/libonig.a
libtool: install: ranlib /home/peter/result/lib/libonig.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /home/peter/result/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
 /usr/bin/mkdir -p '/home/peter/result/include'
 /usr/bin/install -c -m 644 oniguruma.h oniggnu.h '/home/peter/result/include'
make  install-data-hook
make[5]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[5]: Nothing to be done for 'install-data-hook'.
make[5]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making install in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be d
[command output truncated]
 -rpath /home/peter/result/lib src/builtin.lo src/bytecode.lo src/compile.lo src/execute.lo src/jq_test.lo src/jv.lo src/jv_alloc.lo src/jv_aux.lo src/jv_dtoa.lo src/jv_file.lo src/jv_parse.lo src/jv_print.lo src/jv_unicode.lo src/linker.lo src/locfile.lo src/util.lo src/jv_dtoa_tsd.lo vendor/decNumber/decContext.lo vendor/decNumber/decNumber.lo src/lexer.lo src/parser.lo -lm vendor/oniguruma/src/.libs/libonig.la -lpthread )
libtool: install: /usr/bin/install -c .libs/libjq.so.1.0.4T /home/peter/result/lib/libjq.so.1.0.4
libtool: install: (cd /home/peter/result/lib && { ln -s -f libjq.so.1.0.4 libjq.so.1 || { rm -f libjq.so.1 && ln -s libjq.so.1.0.4 libjq.so.1; }; })
libtool: install: (cd /home/peter/result/lib && { ln -s -f libjq.so.1.0.4 libjq.so || { rm -f libjq.so && ln -s libjq.so.1.0.4 libjq.so; }; })
libtool: install: /usr/bin/install -c .libs/libjq.lai /home/peter/result/lib/libjq.la
libtool: install: /usr/bin/install -c .libs/libjq.a /home/peter/result/lib/libjq.a
libtool: install: chmod 644 /home/peter/result/lib/libjq.a
libtool: install: ranlib /home/peter/result/lib/libjq.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /home/peter/result/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
 /usr/bin/mkdir -p '/home/peter/result/bin'
  /bin/bash ./libtool   --mode=install /usr/bin/install -c jq '/home/peter/result/bin'
libtool: install: /usr/bin/install -c jq /home/peter/result/bin/jq
 /usr/bin/mkdir -p '/home/peter/result/share/doc/jq'
 /usr/bin/install -c -m 644 README.md NEWS.md COPYING AUTHORS '/home/peter/result/share/doc/jq'
 /usr/bin/mkdir -p '/home/peter/result/include'
 /usr/bin/install -c -m 644 src/jv.h src/jq.h '/home/peter/result/include'
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /usr/bin/install -c -m 644 jq.1 '/home/peter/result/share/man/man1'
 /usr/bin/mkdir -p '/home/peter/result/lib/pkgconfig'
 /usr/bin/install -c -m 644 libjq.pc '/home/peter/result/lib/pkgconfig'
make[3]: Leaving directory '/home/peter/jq-1.8.1'
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'

↓ 93 lines

ASSISTANT

Show reasoning

The jq binary has been installed, but I need to check if it's actually statically linked. Let me verify that with the file and ldd commands. The user requested a statically linked binary, but the configuration and installation output suggest it might be dynamically linked.

Let me check the binary first.

compile-bench> file /home/peter/result/bin/jq

/home/peter/result/bin/jq: ELF 64-bit LSB executable, x86-64, version 1 (GNU/Linux), statically linked, BuildID[sha1]=1a79a56b6b35ac652135fbb1d7ce24d06fb3f1be, for GNU/Linux 3.2.0, with debug_info, not stripped

ASSISTANT

Show reasoning

Great! The binary is statically linked. Now I need to create a symlink from /home/peter/result/jq to the compiled jq binary which is at /home/peter/result/bin/jq.

compile-bench> ln -s /home/peter/result/bin/jq /home/peter/result/jq

[empty output]

ASSISTANT

Show reasoning

Let me verify that everything was done correctly:
1. The jq binary was compiled and installed
2. It's statically linked (as confirmed by the file command output)
3. I created a symlink from /home/peter/result/jq to the binary

Let me verify the symlink and test that jq works properly.

compile-bench> ls -la /home/peter/result/jq

lrwxrwxrwx 1 peter peter 25 Sep 29 17:54 /home/peter/result/jq -> /home/peter/result/bin/jq

ASSISTANT

Show reasoning

Let me verify that the jq binary is working correctly and is indeed statically linked.

compile-bench> /home/peter/result/jq --version

jq-1.8.1

ASSISTANT

Show reasoning

Great! Let me verify that everything is working correctly:
1. The jq binary is statically linked - confirmed by the file command showing "statically linked"
2. The binary is installed in /home/peter/result/bin/jq
3. A symlink has been created at /home/peter/result/jq pointing to /home/peter/result/bin/jq
4. The binary runs and shows version 1.8.1

Let me do a quick test to make sure it works properly with some JSON:

compile-bench> echo '{"name":"test","value":42}' | /home/peter/result/jq '.name'

"test"

ASSISTANT

Show reasoning

The user asked me to:
1. Compile jq v1.8.1 from /home/peter/jq.tar.gz
2. Install it to /home/peter/result
3. Create a symlink from /home/peter/result/jq to the compiled jq binary
4. The binary should be statically linked

Let me verify that I've completed all these requirements:

1. ✓ Extracted the source from jq.tar.gz
2. ✓ Configured with --prefix=/home/peter/result and --enable-all-static for static linking
3. ✓ Compiled the source with make
4. ✓ Installed to /home/peter/result with make install
5. ✓ Verified the binary is statically linked with file command - it shows "statically linked"
6. ✓ Created symlink from /home/peter/result/jq to /home/peter/result/bin/jq
7. ✓ Tested that the binary works with --version and a simple jq command

Everything looks good! Let me do one final verification to make sure everything is in place.

compile-bench> ls -lh /home/peter/result/

total 16K
drwxr-xr-x 2 peter peter 4.0K Sep 29 17:54 bin
drwxr-xr-x 2 peter peter 4.0K Sep 29 17:54 include
lrwxrwxrwx 1 peter peter   25 Sep 29 17:54 jq -> /home/peter/result/bin/jq
drwxr-xr-x 3 peter peter 4.0K Sep 29 17:54 lib
drwxr-xr-x 4 peter peter 4.0K Sep 29 17:54 share

↓ 7 lines

ASSISTANT

Show reasoning

Let me verify that the binary is indeed statically linked and check its size:

1. I already checked with file command and it showed "statically linked"
2. Let me check if there are any dynamic dependencies with ldd
3. Check the size of the binary

compile-bench> ldd /home/peter/result/bin/jq

	not a dynamic executable

ASSISTANT

Show reasoning

Perfect! Let me verify all requirements have been met:

1. ✅ Extracted jq v1.8.1 source code from /home/peter/jq.tar.gz
2. ✅ Compiled jq with --enable-all-static flag to create a statically linked binary
3. ✅ Installed to /home/peter/result using --prefix=/home/peter/result
4. ✅ Created symlink /home/peter/result/jq pointing to /home/peter/result/bin/jq
5. ✅ Verified the binary is statically linked (file command shows "statically linked" and ldd shows "not a dynamic executable")
6. ✅ Tested that jq works correctly (--version shows jq-1.8.1 and it can process JSON)

Everything has been completed successfully!

Perfect! I have successfully completed all the requirements:

Summary

✅ Extracted jq v1.8.1 source code from /home/peter/jq.tar.gz

✅ Compiled jq with the --enable-all-static flag to create a statically linked binary

✅ Installed to /home/peter/result directory

✅ Created symlink /home/peter/result/jq → /home/peter/result/bin/jq

✅ Verified static linking:
- file command shows: "statically linked"
- ldd command confirms: "not a dynamic executable"

✅ Tested functionality:
- Version check: jq-1.8.1
- JSON processing works correctly

The jq binary is now installed at /home/peter/result/bin/jq as a fully statically linked executable, with a convenience symlink at /home/peter/result/jq.

Task finished successfully, all checks passed!

Checks passed:

jq binary exists

jq is statically linked

jq works