CompileBench Attempt: jq-windows2, gemini-2.5-pro, 7pizx91bf9e9t

<- Ranking

Summary

Task

jq-windows2

Performance

Cost	$0.142
Total elapsed time	2m10s
LLM inference time	1m11s
Command execution time	59s
Commands executed	16

All details >

Attempt ID	`7pizx91bf9e9t`	Attempt group	run-16-09-22-05
Revision	`fb5c74bd2fee`	AWS Instance	m8i.2xlarge
Start time	2025-09-16T21:49:28.759Z	End time	2025-09-16T21:51:39.933Z
Task	jq-windows2	Environment	ubuntu-22.04-amd64-wine
Model	gemini-2.5-pro	OpenRouter slug	`google/gemini-2.5-pro`
Temperature	1	Explicit prompt caching	false
User msg after tool call	false	Max tool calls	100
Total timeout seconds	2400	Single command timeout	1200
Cost	$0.142	Duration	2m10s
LLM inference time	1m11s	Command execution time	59s
Final context tokens	11,787	Total output tokens	5,060
Output reasoning tokens	4,213	Messages	35
Assistant messages	17	User messages	1
System messages	1	Commands executed	16

Download full attempt result JSON

Task

Task: jq-windows2

jq 1.8.1 is a command-line JSON utility for viewing and transforming JSON.
Project link: github.com/jqlang/jq

Task:
Compile and install jq to a specific location. Cross-compile to Windows. This task is a variant of jq-windows, without a hint to do a static build.

Difficulties:
Cross-compilation to Windows, setting up the cross-compilation toolchain (compilers, etc), making sure that there are no dynamic libraries.

Environment:
Ubuntu 22.04 on amd64, with internet access.

View task page

Execution log

SYSTEM

You are a package-building specialist operating a Ubuntu 22.04 bash shell via one tool: run_terminal_cmd.
The current working directory of every run_terminal_cmd is /home/peter.
Execution rules:
- Always pass non-interactive flags for any command that could prompt (e.g., -y, --yes, DEBIAN_FRONTEND=noninteractive).
- Don't include any newlines in the command.
- You can use sudo.
If you encounter any errors or issues while doing the user's request, you must fix them and continue the task.
At the end verify you did the user request correctly.

USER

You are given jq v1.8.1 source code at jq.tar.gz. Please compile the jq package for amd64 Windows and install it to /home/peter/result/jq.exe. Make sure it runs correctly via the installed wine.

ASSISTANT

Show reasoning

Initiating Cross-Compilation Plan

I'm mapping out the build steps for jq on Windows from Linux. Right now, I'm focusing on the necessary cross-compilation tools and dependencies, like the compilers, build tools, and Wine. I'll prioritize setting up these tools first before addressing the specifics of jq's build process.

Listing Dependency Needs

I've outlined the essential dependencies: gcc, make, autoconf, libtool, Wine, and MinGW-w64. I intend to script the dependency installation, which is the current task. After that, I'll unpack the source code and move on to configuring the compilation process, leveraging the host flag to specify the target platform.

compile-bench> sudo DEBIAN_FRONTEND=noninteractive apt-get update && sudo DEBIAN_FRONTEND=noninteractive apt-get install -y gcc-mingw-w64-x86-64 autoconf libtool make wine

0% [Working]
            
Get:1 http://security.ubuntu.com/ubuntu jammy-security InRelease [129 kB]

0% [Connecting to archive.ubuntu.com (185.125.190.83)] [1 InRelease 14.2 kB/129
                                                                               
0% [Waiting for headers]
0% [Waiting for headers]
                        
Hit:2 http://archive.ubuntu.com/ubuntu jammy InRelease

0% [Waiting for headers]
                        
Get:3 http://security.ubuntu.com/ubuntu jammy-security/multiverse amd64 Packages [80.3 kB]

0% [Waiting for headers] [3 Packages 14.2 kB/80.3 kB 18%]
                                                         
0% [Waiting for headers]
0% [3 Packages store 0 B] [Waiting for headers] [Waiting for headers]
                                                                     
0% [Waiting for headers] [Waiting for headers]
                                              
Get:4 http://security.ubuntu.com/ubuntu jammy-security/restricted amd64 Packages [5441 kB]

0% [Waiting for headers] [4 Packages 6999 B/5441 kB 0%]
0% [Waiting for headers] [4 Packages 110 kB/5441 kB 2%]
                                                       
Get:5 http://archive.ubuntu.com/ubuntu jammy-updates InRelease [128 kB]

0% [5 InRelease 14.2 kB/128 kB 11%] [4 Packages 686 kB/5441 kB 13%]
                                                                   
Get:6 http://security.ubuntu.com/ubuntu jammy-security/universe amd64 Packages [1274 kB]

                                                                   
0% [5 InRelease 15.6 kB/128 kB 12%] [6 Packages 116 kB/1274 kB 9%]
0% [4 Packages store 0 B] [5 InRelease 15.6 kB/128 kB 12%] [6 Packages 138 kB/1
0% [4 Packages store 0 B] [5 InRelease 15.6 kB/128 kB 12%] [Waiting for headers
                                                                               
Get:7 http://security.ubuntu.com/ubuntu jammy-security/main amd64 Packages [3311 kB]

0% [4 Packages store 0 B] [5 InRelease 15.6 kB/128 kB 12%] [7 Packages 8192 B/3
                                                                               
0% [4 Packages store 0 B] [5 InRelease 15.6 kB/128 kB 12%]
                                                          
0% [5 InRelease 72.1 kB/128 kB 56%]
0% [6 Packages store 0 B] [5 InRelease 75.0 kB/128 kB 59%]
                                                          
0% [5 InRelease 95.3 kB/128 kB 74%]
0% [7 Packages store 0 B] [5 InRelease 95.3 kB/128 kB 74%]
                                                          
0% [7 Packages store 0 B] [Waiting for headers]
0% [7 Packages store 0 B] [Waiting for headers]
                                               
0% [Waiting for headers]
                        
Get:8 http://archive.ubuntu.com/ubuntu jammy-backports InRelease [127 kB]

0% [8 InRelease 2588 B/127 kB 2%]
                                 
0% [Working]
72% [Waiting for headers]
                         
Get:9 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 Packages [
[command output truncated]
-x86-64-win32-runtime_10.3.0-14ubuntu1+24.3_amd64.deb ...
Unpacking gcc-mingw-w64-x86-64-win32-runtime (10.3.0-14ubuntu1+24.3) ...
Selecting previously unselected package gcc-mingw-w64-x86-64-win32.
Preparing to unpack .../12-gcc-mingw-w64-x86-64-win32_10.3.0-14ubuntu1+24.3_amd64.deb ...
Unpacking gcc-mingw-w64-x86-64-win32 (10.3.0-14ubuntu1+24.3) ...
Selecting previously unselected package libltdl-dev:amd64.
Preparing to unpack .../13-libltdl-dev_2.4.6-15build2_amd64.deb ...
Unpacking libltdl-dev:amd64 (2.4.6-15build2) ...
Selecting previously unselected package libtool.
Preparing to unpack .../14-libtool_2.4.6-15build2_all.deb ...
Unpacking libtool (2.4.6-15build2) ...
Selecting previously unselected package gcc-mingw-w64-x86-64.
Preparing to unpack .../15-gcc-mingw-w64-x86-64_10.3.0-14ubuntu1+24.3_all.deb ...
Unpacking gcc-mingw-w64-x86-64 (10.3.0-14ubuntu1+24.3) ...
Setting up binutils-mingw-w64-x86-64 (2.38-3ubuntu1+9build1) ...
Setting up gcc-mingw-w64-base:amd64 (10.3.0-14ubuntu1+24.3) ...
Setting up autotools-dev (20220109.1) ...
Setting up libsigsegv2:amd64 (2.13-1ubuntu3) ...
Setting up gcc-mingw-w64-x86-64-win32-runtime (10.3.0-14ubuntu1+24.3) ...
Setting up mingw-w64-common (8.0.0-1) ...
Setting up mingw-w64-x86-64-dev (8.0.0-1) ...
Setting up libtool (2.4.6-15build2) ...
Setting up gcc-mingw-w64-x86-64-posix-runtime (10.3.0-14ubuntu1+24.3) ...
Setting up m4 (1.4.18-5ubuntu2) ...
Setting up gcc-mingw-w64-x86-64-posix (10.3.0-14ubuntu1+24.3) ...
update-alternatives: using /usr/bin/x86_64-w64-mingw32-gcc-posix to provide /usr/bin/x86_64-w64-mingw32-gcc (x86_64-w64-mingw32-gcc) in auto mode
Setting up gcc-mingw-w64-x86-64-win32 (10.3.0-14ubuntu1+24.3) ...
update-alternatives: using /usr/bin/x86_64-w64-mingw32-gcc-win32 to provide /usr/bin/x86_64-w64-mingw32-gcc (x86_64-w64-mingw32-gcc) in auto mode
Setting up gcc-mingw-w64-x86-64 (10.3.0-14ubuntu1+24.3) ...
update-alternatives: warning: forcing reinstallation of alternative /usr/bin/x86_64-w64-mingw32-gcc-win32 because link group x86_64-w64-mingw32-gcc is broken
update-alternatives: warning: skip creation of /usr/bin/x86_64-w64-mingw32-gcc-8 because associated file /usr/bin/x86_64-w64-mingw32-gcc-8.3-win32 (of link group x86_64-w64-mingw32-gcc) doesn't exist
Setting up autoconf (2.71-2) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/automake.1.gz because associated file /usr/share/man/man1/automake-1.16.1.gz (of link group automake) doesn't exist
update-alternatives: warning: skip creation of /usr/share/man/man1/aclocal.1.gz because associated file /usr/share/man/man1/aclocal-1.16.1.gz (of link group automake) doesn't exist
Setting up libltdl-dev:amd64 (2.4.6-15build2) ...
Processing triggers for libc-bin (2.35-0ubuntu3.10) ...
Processing triggers for libwine:amd64 (6.0.3~repack-1) ...

↓ 50 lines

ASSISTANT

Show reasoning

Planning the Compilation

I've installed the cross-compilation tools, including the MinGW-w64 compiler, autoconf, libtool, make, and wine. Next, I'll extract the jq source code to begin the build process. I'm anticipating challenges with Windows-specific paths and potential dependency issues.

Extracting the Source Code

I've successfully extracted the jq source code from the tarball. Now, I'm turning my attention to configuring the build environment for Windows. I'll need to adapt the configuration scripts to handle Windows-specific paths and ensure proper cross-compilation settings. This is where the real work begins.

compile-bench> tar -xzf jq.tar.gz

[empty output]

ASSISTANT

Show reasoning

Initiating the Build

I've successfully installed the necessary compilation tools, and extracted the jq source code. Now, I am starting to configure and build jq for the Windows environment using MinGW and wine. I anticipate encountering some platform-specific challenges.

Configuring the Build

\n\n

I've now moved into the jq-1.8.1 directory. Next, I am running the configure script, specifying the host and installation prefix, as per the instructions. I'm aiming to build for x86_64-w64-mingw32 and install to /home/peter/result. Fingers crossed that the configuration stage completes without any issues.

compile-bench> cd jq-1.8.1 && ./configure --host=x86_64-w64-mingw32 --prefix=/home/peter/result

checking for x86_64-w64-mingw32-gcc... x86_64-w64-mingw32-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.exe
checking for suffix of executables... .exe
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether x86_64-w64-mingw32-gcc accepts -g... yes
checking for x86_64-w64-mingw32-gcc option to enable C11 features... none needed
checking whether x86_64-w64-mingw32-gcc understands -c and -o together... yes
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for wchar.h... yes
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for x86_64-w64-mingw32-strip... x86_64-w64-mingw32-strip
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking whether make supports nested variables... yes
checking dependency style of x86_64-w64-mingw32-gcc... gcc3
checking whether make supports nested variables... (cached) yes
checking for x86_64-w64-mingw32-ar... x86_64-w64-mingw32-ar
checking the archiver (x86_64-w64-mingw32-ar) interface... ar
checking whether to enable maintainer-specific portions of Makefiles... no
checking for x86_64-w64-mingw32-gcc... (cached) x86_64-w64-mingw32-gcc
checking whether the compiler supports GNU C... (cached) yes
checking whether x86_64-w64-mingw32-gcc accepts -g... (cached) yes
checking for x86_64-w64-mingw32-gcc option to enable C11 features... (cached) none needed
checking whether x86_64-w64-mingw32-gcc understands -c and -o together... (cached) yes
checking how to run the C preprocessor... x86_64-w64-mingw32-gcc -E
checking for bison... no
checking for byacc... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-w64-mingw32
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by x86_64-w64-mingw32-gcc... /usr/bin/x86_64-w64-mingw32-ld
checking if the linker (/usr/bin/x86_64-w64-mingw32-ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/x86_64-w64-mingw32-nm -B
checking the name lister (/usr/bin/x86_64-w64-mingw32-nm -B) interface... BSD n
[command output truncated]
dump... x86_64-w64-mingw32-objdump
checking how to recognize dependent libraries... file_magic ^x86 archive import|^x86 DLL
checking for x86_64-w64-mingw32-dlltool... x86_64-w64-mingw32-dlltool
checking how to associate runtime and link libraries... func_cygming_dll_for_implib
checking for x86_64-w64-mingw32-ar... x86_64-w64-mingw32-ar
checking for archiver @FILE support... @
checking for x86_64-w64-mingw32-strip... (cached) x86_64-w64-mingw32-strip
checking for x86_64-w64-mingw32-ranlib... x86_64-w64-mingw32-ranlib
checking command to parse /usr/bin/x86_64-w64-mingw32-nm -B output from x86_64-w64-mingw32-gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for x86_64-w64-mingw32-mt... no
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... no
checking for objdir... .libs
checking if x86_64-w64-mingw32-gcc supports -fno-rtti -fno-exceptions... no
checking for x86_64-w64-mingw32-gcc option to produce PIC... -DDLL_EXPORT -DPIC
checking if x86_64-w64-mingw32-gcc PIC flag -DDLL_EXPORT -DPIC works... yes
checking if x86_64-w64-mingw32-gcc static flag -static works... yes
checking if x86_64-w64-mingw32-gcc supports -c -o file.o... yes
checking if x86_64-w64-mingw32-gcc supports -c -o file.o... (cached) yes
checking whether the x86_64-w64-mingw32-gcc linker (/usr/bin/x86_64-w64-mingw32-ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... yes
checking dynamic linker characteristics... Win32 ld.exe
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking whether make sets $(MAKE)... (cached) yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking for sys/times.h... no
checking size of int... 4
checking size of long... 4
checking size of long long... 8
checking size of void*... 8
checking for size_t... yes
checking for working alloca.h... no
checking for alloca... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating test/Makefile
config.status: creating sample/Makefile
config.status: creating onig-config
config.status: creating src/config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default commands

↓ 120 lines

ASSISTANT

Show reasoning

Building the Target

I've got the Windows amd64 build configured and ready to go. Next up: compiling the source code! I'm planning to use the make command to get this done, hopefully smoothly.

compile-bench> cd jq-1.8.1 && make

mkdir -p src
  GEN      src/builtin.inc
mkdir -p src
  GEN      src/config_opts.inc
mkdir -p src
  GEN      src/version.h
make  all-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making all in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making all in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make  all-am
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c -o regparse.lo regparse.c
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c regparse.c  -DDLL_EXPORT -DPIC -o .libs/regparse.o
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c regparse.c -o regparse.o >/dev/null 2>&1
mv -f .deps/regparse.Tpo .deps/regparse.Plo
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c -o regcomp.lo regcomp.c
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c regcomp.c  -DDLL_EXPORT -DPIC -o .libs/regcomp.o
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c regcomp.c -o regcomp.o >/dev/null 2>&1
mv -f .deps/regcomp.Tpo .deps/regcomp.Plo
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c -o regexec.lo regexec.c
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c regexec.c  -DDLL_EXPORT -DPIC -o .libs/regexec.o
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c regexec.c -o regexec.o >/dev/null 2>&1
mv -f .deps/regexec.Tpo .deps/regexec.Plo
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c -o regenc.lo regenc.c
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c regenc.c  -DDLL_EXPORT -DPIC -o .libs/regenc.o
libtool: compile:  x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c regenc.c -o regenc.o >/dev/null 2>&1
mv -f .deps/regenc.Tpo .deps/regenc.Plo
/bin/bash ../libtool  --tag=CC   --mode=compile x86_64-w64-mingw32-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c -o regerror.lo regerror.c
libtool: compile:  x86_64-w64
[command output truncated]
.libs/libonig.dll.a
libtool: link: x86_64-w64-mingw32-ar cr .libs/libonig.a  regparse.o regcomp.o regexec.o regenc.o regerror.o regext.o regsyntax.o regtrav.o regversion.o st.o reggnu.o unicode.o unicode_unfold_key.o unicode_fold1_key.o unicode_fold2_key.o unicode_fold3_key.o ascii.o utf8.o utf16_be.o utf16_le.o utf32_be.o utf32_le.o euc_jp.o euc_jp_prop.o sjis.o sjis_prop.o iso8859_1.o iso8859_2.o iso8859_3.o iso8859_4.o iso8859_5.o iso8859_6.o iso8859_7.o iso8859_8.o iso8859_9.o iso8859_10.o iso8859_11.o iso8859_13.o iso8859_14.o iso8859_15.o iso8859_16.o euc_tw.o euc_kr.o big5.o gb18030.o koi8_r.o cp1251.o onig_init.o
libtool: link: x86_64-w64-mingw32-ranlib .libs/libonig.a
libtool: link: ( cd ".libs" && rm -f "libonig.la" && ln -s "../libonig.la" "libonig.la" )
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making all in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making all in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
sed -e 's,[@]datadir[@],/home/peter/result/share,g' -e 's,[@]datarootdir[@],/home/peter/result/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/home/peter/result,g' -e 's,[@]exec_prefix[@],/home/peter/result,g' -e 's,[@]libdir[@],/home/peter/result/lib,g' -e 's,[@]includedir[@],/home/peter/result/include,g' < ./oniguruma.pc.in > oniguruma.pc
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
mkdir -p src
  GEN      src/version.h
  CC       src/main.o
src/main.c:21:1: warning: function declaration isn't a prototype [ttps://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wstrict-prototypes-Wstrict-prototypes]8;;]
   21 | extern void jv_tsd_dtoa_ctx_init();
      | ^~~~~~
  CC       src/builtin.lo
  CC       src/bytecode.lo
  CC       src/compile.lo
  CC       src/execute.lo
  CC       src/jq_test.lo
  CC       src/jv.lo
  CC       src/jv_alloc.lo
  CC       src/jv_aux.lo
  CC       src/jv_dtoa.lo
  CC       src/jv_file.lo
  CC       src/jv_parse.lo
  CC       src/jv_print.lo
  CC       src/jv_unicode.lo
  CC       src/linker.lo
  CC       src/locfile.lo
  CC       src/util.lo
  CC       src/jv_dtoa_tsd.lo
  CC       vendor/decNumber/decContext.lo
  CC       vendor/decNumber/decNumber.lo
  CC       src/lexer.lo
  CC       src/parser.lo
  CCLD     libjq.la
  CCLD     jq.exe
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'

↓ 84 lines

ASSISTANT

Show reasoning

Cross-Compiling JQ

I've successfully compiled jq for Windows, leveraging the cross-compilation setup. Now I'm focusing on the installation aspect. I am considering the best approach to bundle the executable and any dependencies for a clean Windows installation, like a portable application or a package installation.

Implementing the Installation

I've installed jq.exe to /home/peter/result/bin/jq.exe as predicted. Now, I'll move the executable to /home/peter/result/jq.exe per the user's preference. Next, I'll verify the installation by using wine to execute the command /home/peter/result/jq.exe --version.

compile-bench> cd jq-1.8.1 && make install

mkdir -p src
  GEN      src/version.h
make  install-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making install in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making install in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
 /usr/bin/mkdir -p '/home/peter/result/lib'
 /bin/bash ../libtool   --mode=install /usr/bin/install -c   libonig.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libonig.dll.a /home/peter/result/lib/libonig.dll.a
libtool: install: base_file=`basename libonig.la`
libtool: install:  dlpath=`/bin/bash 2>&1 -c '. .libs/'libonig.la'i; echo libonig-5.dll'`
libtool: install:  dldir=/home/peter/result/lib/`dirname ../bin/libonig-5.dll`
libtool: install:  test -d /home/peter/result/lib/../bin || mkdir -p /home/peter/result/lib/../bin
libtool: install:  /usr/bin/install -c .libs/libonig-5.dll /home/peter/result/lib/../bin/libonig-5.dll
libtool: install:  chmod a+x /home/peter/result/lib/../bin/libonig-5.dll
libtool: install:  if test -n '' && test -n 'x86_64-w64-mingw32-strip --strip-unneeded'; then eval 'x86_64-w64-mingw32-strip --strip-unneeded /home/peter/result/lib/../bin/libonig-5.dll' || exit 0; fi
libtool: install: /usr/bin/install -c .libs/libonig.lai /home/peter/result/lib/libonig.la
libtool: install: /usr/bin/install -c .libs/libonig.a /home/peter/result/lib/libonig.a
libtool: install: chmod 644 /home/peter/result/lib/libonig.a
libtool: install: x86_64-w64-mingw32-ranlib /home/peter/result/lib/libonig.a
 /usr/bin/mkdir -p '/home/peter/result/include'
 /usr/bin/install -c -m 644 oniguruma.h oniggnu.h '/home/peter/result/include'
make  install-data-hook
make[5]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
echo "/bin/bash ../libtool   --mode=install /usr/bin/install -c -m 644 libonig.def /home/peter/result/lib"; \
/bin/bash ../libtool   --mode=install /usr/bin/install -c -m 644 libonig.def /home/peter/result/lib || exit 1
/bin/bash ../libtool   --mode=install /usr/bin/install -c -m 644 libonig.def /home/peter/result/lib
libtool: install: /usr/bin/install -c -m 644 libonig.def /home/peter/result/lib/libonig.def
make[5]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making install in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making install in sample
make[3]: Entering directory '/home/peter/j
[command output truncated]
ake[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
mkdir -p src
  GEN      src/version.h
  CC       src/main.o
src/main.c:21:1: warning: function declaration isn't a prototype [ttps://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wstrict-prototypes-Wstrict-prototypes]8;;]
   21 | extern void jv_tsd_dtoa_ctx_init();
      | ^~~~~~
  CCLD     jq.exe
make[3]: Entering directory '/home/peter/jq-1.8.1'
mkdir -p src
  GEN      src/version.h
  CC       src/main.o
src/main.c:21:1: warning: function declaration isn't a prototype [ttps://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wstrict-prototypes-Wstrict-prototypes]8;;]
   21 | extern void jv_tsd_dtoa_ctx_init();
      | ^~~~~~
  CCLD     jq.exe
 /usr/bin/mkdir -p '/home/peter/result/lib'
 /bin/bash ./libtool   --mode=install /usr/bin/install -c   libjq.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libjq.dll.a /home/peter/result/lib/libjq.dll.a
libtool: install: base_file=`basename libjq.la`
libtool: install:  dlpath=`/bin/bash 2>&1 -c '. .libs/'libjq.la'i; echo libjq-1.dll'`
libtool: install:  dldir=/home/peter/result/lib/`dirname ../bin/libjq-1.dll`
libtool: install:  test -d /home/peter/result/lib/../bin || mkdir -p /home/peter/result/lib/../bin
libtool: install:  /usr/bin/install -c .libs/libjq-1.dll /home/peter/result/lib/../bin/libjq-1.dll
libtool: install:  chmod a+x /home/peter/result/lib/../bin/libjq-1.dll
libtool: install:  if test -n '' && test -n 'x86_64-w64-mingw32-strip --strip-unneeded'; then eval 'x86_64-w64-mingw32-strip --strip-unneeded /home/peter/result/lib/../bin/libjq-1.dll' || exit 0; fi
libtool: install: /usr/bin/install -c .libs/libjq.lai /home/peter/result/lib/libjq.la
libtool: install: /usr/bin/install -c .libs/libjq.a /home/peter/result/lib/libjq.a
libtool: install: chmod 644 /home/peter/result/lib/libjq.a
libtool: install: x86_64-w64-mingw32-ranlib /home/peter/result/lib/libjq.a
 /usr/bin/mkdir -p '/home/peter/result/bin'
  /bin/bash ./libtool   --mode=install /usr/bin/install -c jq.exe '/home/peter/result/bin'
libtool: install: /usr/bin/install -c .libs/jq.exe /home/peter/result/bin/jq.exe
 /usr/bin/mkdir -p '/home/peter/result/share/doc/jq'
 /usr/bin/install -c -m 644 README.md NEWS.md COPYING AUTHORS '/home/peter/result/share/doc/jq'
 /usr/bin/mkdir -p '/home/peter/result/include'
 /usr/bin/install -c -m 644 src/jv.h src/jq.h '/home/peter/result/include'
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /usr/bin/install -c -m 644 jq.1 '/home/peter/result/share/man/man1'
 /usr/bin/mkdir -p '/home/peter/result/lib/pkgconfig'
 /usr/bin/install -c -m 644 libjq.pc '/home/peter/result/lib/pkgconfig'
make[3]: Leaving directory '/home/peter/jq-1.8.1'
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'

↓ 91 lines

ASSISTANT

Show reasoning

Testing the Installation

I've moved the jq.exe executable to the target directory. The next step is to execute it using wine. My plan is to run a basic jq command to validate that everything is working as expected. I'm anticipating a successful verification!

Confirming Functionality with Wine

I've just finished the initial setup. The jq.exe file is now in the target directory. My current focus is to execute the program via wine. I'm preparing to run the test command, which should output {"a":1}. I'll be carefully examining the output to make sure the installation is successful.

compile-bench> mv /home/peter/result/bin/jq.exe /home/peter/result/jq.exe

[empty output]

ASSISTANT

Show reasoning

Running the Binary

I've successfully compiled and installed jq.exe. The next step is to execute it using wine to validate its functionality. I'll run a straightforward jq command to ensure everything's working as expected.

Testing the Command

I'm now ready to execute the jq command via wine. I'm using the command wine /home/peter/result/jq.exe . <<< '{"foo": "bar"}', which should output the JSON object if successful. I will observe the output to confirm the correct behavior.

compile-bench> wine /home/peter/result/jq.exe . <<< '{"foo": "bar"}'

it looks like wine32 is missing, you should install it.
multiarch needs to be enabled first.  as root, please
execute "dpkg --add-architecture i386 && apt-get update &&
apt-get install wine32"
0048:err:explorer:initialize_display_settings Failed to query current display settings for L"\\\\.\\DISPLAY1".
0024:err:module:import_dll Library libjq-1.dll (which is needed by L"Z:\\home\\peter\\result\\jq.exe") not found
0024:err:module:import_dll Library libonig-5.dll (which is needed by L"Z:\\home\\peter\\result\\jq.exe") not found
0024:err:module:LdrInitializeThunk Importing dlls for L"Z:\\home\\peter\\result\\jq.exe" failed, status c0000135

↓ 9 lines

ASSISTANT

Show reasoning

Attempting Binary Creation

I've successfully compiled and installed jq for Windows on Linux. Unfortunately, when I try to run the generated executable with Wine, it throws an error about missing .dll files, specifically, libjq-1. I'm now researching the dependencies required by the compiled binary.

Debugging the Wine Environment

I've moved the required DLLs, libjq-1.dll and libonig-5.dll, to the same directory as jq.exe. Now I intend to re-run the wine command, targeting the compiled executable. I'm hopeful this resolves the missing library issue.

Resolving File Dependencies

I've opted to move the .dll files to the same directory as the executable, /home/peter/result/. I'll now re-run the wine command with the same input to verify the fix. I'll be monitoring for the original error concerning the missing .dll libraries. If it persists, I'll troubleshoot potential wine32 related issues.

I have successfully compiled and installed jq.exe. However, it appears that wine is unable to locate the necessary DLL files to run the executable. I will move the DLLs to the same directory as jq.exe and try again.

compile-bench> mv /home/peter/result/bin/libjq-1.dll /home/peter/result/bin/libonig-5.dll /home/peter/result/

009c:err:rpc:I_RpcReceive we got fault packet with status 0x1c010003

ASSISTANT

Show reasoning

Investigating the Failure

I'm still wrestling with the wine error. The fault packet status of 0x1c0100 is proving to be a real head-scratcher. Digging through the wine logs, I'm trying to pinpoint the source of this RPC issue before I attempt another run.

Debugging the RPC Error

I'm attempting to resolve the RPC fault by painstakingly moving the DLLs. I've split the mv command into discrete steps, hoping to isolate the issue. First, moving libjq-1.dll, then libonig-5.dll. After each move, I plan a wine execution to validate the fix and, finally, an ls -l to observe the directory's final state.

I encountered an error while moving the DLL files. I will try moving them one by one.

compile-bench> mv /home/peter/result/bin/libjq-1.dll /home/peter/result/

mv: cannot stat '/home/peter/result/bin/libjq-1.dll': No such file or directory

ASSISTANT

Show reasoning

Revisiting the Problem

I've been wrestling with a persistent issue: moving those pesky DLLs for wine. The mv command stubbornly refuses to cooperate. I'm now considering alternative strategies to get these DLLs where they need to be, perhaps exploring symbolic links or absolute paths.

Debugging the Move

I've pinpointed the error in my mv command, which incorrectly included a directory specifier. The actual files are in /home/peter/result/bin. I need to ensure the target directory is correct before attempting the move again. Let's double-check the listing of /home/peter/result and /home/peter/result/bin.

Examining File Locations

I've reviewed the output of the make install command, which clarifies the DLL locations: /home/peter/result/bin. Now, I must correct the previous mv command's syntax; it incorrectly attempted to move multiple files to the directory rather than a single move command. To ensure I'm using the correct paths, I'm preparing ls commands to confirm the presence of the files.

I made a mistake in the previous step. It seems I can't move both files at once. Let me move them one by one. I'll start by listing the files in the bin directory to make sure I have the correct paths.

compile-bench> ls /home/peter/result/bin

onig-config

ASSISTANT

It seems I was mistaken about the location of the DLL files. I will search for them in the jq-1.8.1 directory.

compile-bench> find /home/peter/jq-1.8.1 -name "*.dll"

/home/peter/jq-1.8.1/vendor/oniguruma/src/.libs/libonig-5.dll
/home/peter/jq-1.8.1/.libs/libjq-1.dll

↓ 3 lines

ASSISTANT

I have located the DLL files. Now I will copy them to the /home/peter/result directory.

compile-bench> cp /home/peter/jq-1.8.1/vendor/oniguruma/src/.libs/libonig-5.dll /home/peter/result/ && cp /home/peter/jq-1.8.1/.libs/libjq-1.dll /home/peter/result/

[empty output]

ASSISTANT

Now that the DLLs are in the same directory as jq.exe, I will try running it again with wine.

compile-bench> wine /home/peter/result/jq.exe . <<< '{"foo": "bar"}'

it looks like wine32 is missing, you should install it.
multiarch needs to be enabled first.  as root, please
execute "dpkg --add-architecture i386 && apt-get update &&
apt-get install wine32"
0048:err:explorer:initialize_display_settings Failed to query current display settings for L"\\\\.\\DISPLAY1".
0024:err:module:import_dll Library libwinpthread-1.dll (which is needed by L"Z:\\home\\peter\\result\\libjq-1.dll") not found
0024:err:module:import_dll Library libjq-1.dll (which is needed by L"Z:\\home\\peter\\result\\jq.exe") not found
0024:err:module:LdrInitializeThunk Importing dlls for L"Z:\\home\\peter\\result\\jq.exe" failed, status c0000135

↓ 9 lines

ASSISTANT

Show reasoning

Running the executable

I've made progress in compiling jq and getting it set up within my test environment. I've verified that the executable, jq.exe, now resides in the expected directory, ready for execution. The next step is to address the Wine-related dependency issues that I'm sure will crop up, and then to test the functionality.

Searching for DLLs

I've located the libwinpthread-1.dll file and have copied it into the /home/peter/result directory, alongside the other necessary DLLs. My expectation is that this should resolve the last dependency issue. I'm about to execute the wine command again and see if it works now.

It appears I am still missing libwinpthread-1.dll. I will find it and copy it to the /home/peter/result directory.

compile-bench> find /usr -name "libwinpthread-1.dll"

/usr/x86_64-w64-mingw32/lib/libwinpthread-1.dll

ASSISTANT

I have located libwinpthread-1.dll. I will now copy it to the /home/peter/result directory.

compile-bench> cp /usr/x86_64-w64-mingw32/lib/libwinpthread-1.dll /home/peter/result/

[empty output]

ASSISTANT

Now that all the necessary DLLs are in the same directory as jq.exe, I will try running it again with wine.

compile-bench> wine /home/peter/result/jq.exe . <<< '{"foo": "bar"}'

it looks like wine32 is missing, you should install it.
multiarch needs to be enabled first.  as root, please
execute "dpkg --add-architecture i386 && apt-get update &&
apt-get install wine32"
0050:err:explorer:initialize_display_settings Failed to query current display settings for L"\\\\.\\DISPLAY1".
{

"foo":"bar"

}

↓ 9 lines

ASSISTANT

Show reasoning

Initiating the Build

I've started the process of installing the necessary dependencies: MinGW-w64, autoconf, libtool, make, and, of course, wine. Once that's all in place, I'll extract the source code.

Defining the Host

I'm now in the jq-1.8.1 directory after extracting the archive. I've configured the build with the --host=x86_64-w64-mingw32 and --prefix=/usr/local flags. Next, I will execute make to compile the source code.

Analyzing the Failures

I'm now examining the error messages closely. It seems those DLLs, libjq-1.dll and libonig-5.dll, weren't installed where I thought they would be. I'll need to determine their actual install locations and potentially adjust the make install step to ensure they end up alongside the executable, or find another solution. The hunt is on for those missing dependencies!

Debugging the Runtime

I've addressed the initial missing DLLs, copying libjq-1.dll and libonig-5.dll to the executable's directory. However, I'm now encountering a libwinpthread-1.dll error. I've located and copied that DLL too, and am ready to try running it under wine once more.

Verifying the Output

I've successfully compiled and run jq.exe with wine. I've verified the output, which confirms that all the necessary DLLs are now in place, solving the initial dependency errors. The process is complete.

I have successfully compiled jq for amd64 Windows and installed it to /home/peter/result/jq.exe. I also copied all the necessary DLL files to the same directory and verified that it runs correctly using wine.

Task finished successfully, all checks passed!

Checks passed:

jq.exe is an amd64 Windows executable

jq help contains expected string

jq works