Summary
Performance
| Cost | $0.012 |
| Total elapsed time | 1m3s |
| LLM inference time | 25s |
| Command execution time | 38s |
| Commands executed | 12 |
All details >
| Attempt ID | 5omeuh6g15vxt | Attempt group | run-16-09-22-05 |
| Revision | fb5c74bd2fee | AWS Instance | m8i.2xlarge |
| Start time | 2025-09-16T20:38:34.460Z | End time | 2025-09-16T20:39:39.533Z |
| Task | curl-ssl | Environment | ubuntu-22.04-amd64 |
| Model |  gpt-oss-120b-high | OpenRouter slug | openai/gpt-oss-120b |
| Temperature | 1 | Explicit prompt caching | false |
| User msg after tool call | false | Max tool calls | 70 |
| Total timeout seconds | 900 | Single command timeout | 600 |
| Cost | $0.012 | Duration | 1m3s |
| LLM inference time | 25s | Command execution time | 38s |
| Final context tokens | 10,747 | Total output tokens | 2,270 |
| Output reasoning tokens | 1,472 | Messages | 27 |
| Assistant messages | 13 | User messages | 1 |
| System messages | 1 | Commands executed | 12 |
Task
Task: curl-ssl
curl 8.16.0 is a command-line HTTP client.
Project link: curl.se
Task:
Compile and install curl to a specific location. Build with SSL support (TLS v1.3), brotli, zlib and zstd.
Difficulties:
Installing dependencies can be tricky.
Environment:
Ubuntu 22.04 on amd64, with internet access.
Execution log
SYSTEM
You are a package-building specialist operating a Ubuntu 22.04 bash shell via one tool: run_terminal_cmd.
The current working directory of every run_terminal_cmd is /home/peter.
Execution rules:
- Always pass non-interactive flags for any command that could prompt (e.g., -y, --yes, DEBIAN_FRONTEND=noninteractive).
- Don't include any newlines in the command.
- You can use sudo.
If you encounter any errors or issues while doing the user's request, you must fix them and continue the task.
At the end verify you did the user request correctly.
USER
You are given a curl v8.16.0 source code at /home/peter/curl.tar.gz. Please compile curl and install it to /home/peter/result. Create a symlink from /home/peter/result/curl to the actual binary. Make sure it builds with SSL support (TLS v1.3), brotli, zlib and zstd.
ASSISTANT
Show reasoning
We need to extract tar.gz, configure with prefix /home/peter/result, enable SSL (OpenSSL with TLS1.3), brotli, zlib, zstd. Need to ensure dependencies installed: build-essential, autoconf, libssl-dev, libbrotli-dev, zlib1g-dev, libzstd-dev. Use sudo apt-get install -y. Then compile.
Steps:
1. Install dependencies.
2. Extract tar.gz.
3. cd into source directory (likely curl-8.16.0).
4. Run ./configure --prefix=/home/peter/result --with-ssl --with-brotli --with-zlib --with-zstd
Also maybe --enable-optimizations.
5. make -j$(nproc)
6. make install
7. Create symlink: ln -s /home/peter/result/bin/curl /home/peter/result/curl
Check binary exists.
Let's execute.
compile-bench> sudo apt-get update -y
0% [Working]
Hit:1 http://archive.ubuntu.com/ubuntu jammy InRelease
0% [Waiting for headers] [Waiting for headers]
Get:2 http://security.ubuntu.com/ubuntu jammy-security InRelease [129 kB]
0% [Waiting for headers] [2 InRelease 14.2 kB/129 kB 11%]
0% [Waiting for headers] [2 InRelease 14.2 kB/129 kB 11%]
Get:3 http://archive.ubuntu.com/ubuntu jammy-updates InRelease [128 kB]
0% [3 InRelease 12.7 kB/128 kB 10%] [2 InRelease 14.2 kB/129 kB 11%]
0% [3 InRelease 90.9 kB/128 kB 71%]
0% [3 InRelease 126 kB/128 kB 98%]
0% [Waiting for headers]
0% [Waiting for headers] [Waiting for headers]
Get:4 http://archive.ubuntu.com/ubuntu jammy-backports InRelease [127 kB]
0% [4 InRelease 2588 B/127 kB 2%] [Waiting for headers]
Get:5 http://security.ubuntu.com/ubuntu jammy-security/restricted amd64 Packages [5441 kB]
0% [4 InRelease 12.7 kB/127 kB 10%] [5 Packages 2655 B/5441 kB 0%]
0% [5 Packages 113 kB/5441 kB 2%]
19% [Waiting for headers] [5 Packages 163 kB/5441 kB 3%]
Get:6 http://archive.ubuntu.com/ubuntu jammy-updates/universe amd64 Packages [1581 kB]
20% [6 Packages 2655 B/1581 kB 0%] [5 Packages 252 kB/5441 kB 5%]
44% [Waiting for headers] [5 Packages 3300 kB/5441 kB 61%]
Get:7 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 Packages [3626 kB]
44% [7 Packages 62.9 kB/3626 kB 2%] [5 Packages 3300 kB/5441 kB 61%]
44% [6 Packages store 0 B] [7 Packages 62.9 kB/3626 kB 2%] [5 Packages 3300 kB/
55% [7 Packages 809 kB/3626 kB 22%] [5 Packages 4720 kB/5441 kB 87%]
61% [7 Packages 1195 kB/3626 kB 33%]
61% [5 Packages store 0 B] [7 Packages 1195 kB/3626 kB 33%]
73% [5 Packages store 0 B] [Waiting for headers]
Get:8 http://security.ubuntu.com/ubuntu jammy-security/main amd64 Packages [3311 kB]
74% [5 Packages store 0 B] [8 Packages 32.8 kB/3311 kB 1%]
90% [5 Packages store 0 B] [Waiting for headers]
Get:9 http://security.ubuntu.com/ubuntu jammy-security/universe amd64 Packages [1274 kB]
90% [5 Packages store 0 B] [9 Packages 0 B/1274 kB 0%]
97% [9 Packages 1108 kB/1274 kB 87%]
97% [7 Packages store 0 B] [9 Packages 1108 kB/1274 kB 87%]
97% [7 Packages store 0 B] [Waiting for headers]
Get:10 http://security.ubuntu.com/ubuntu jammy-security/multiverse amd64 Packages [80.3 kB]
98% [7 Packages store 0 B] [10 Packages 28.7 kB/80.3 kB 36%]
98% [7 Packages store 0 B]
98% [Working]
98% [8 Packages store 0 B]
99% [Working]
99% [9 Packages store 0 B]
99% [Working]
99% [10 Packages store 0 B]
100% [Working]
Fetched 15.7 MB in 2s (9848 kB/s)
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 3%
Reading package lists... 3%
Reading package lists... 4%
Reading package lists... 4%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 52%
Reading package lists... 52%
Reading package lists... 67%
Reading package lists... 67%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 81%
Reading package lists... 81%
Reading package lists... 96%
Reading package lists... 96%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... Done
↓ 13 lines
compile-bench> sudo apt-get update -y
0% [Working]
Hit:1 http://archive.ubuntu.com/ubuntu jammy InRelease
0% [Waiting for headers] [Waiting for headers]
Get:2 http://security.ubuntu.com/ubuntu jammy-security InRelease [129 kB]
0% [Waiting for headers] [2 InRelease 14.2 kB/129 kB 11%]
0% [Waiting for headers] [2 InRelease 14.2 kB/129 kB 11%]
Get:3 http://archive.ubuntu.com/ubuntu jammy-updates InRelease [128 kB]
0% [3 InRelease 12.7 kB/128 kB 10%] [2 InRelease 14.2 kB/129 kB 11%]
0% [3 InRelease 90.9 kB/128 kB 71%]
0% [3 InRelease 126 kB/128 kB 98%]
0% [Waiting for headers]
0% [Waiting for headers] [Waiting for headers]
Get:4 http://archive.ubuntu.com/ubuntu jammy-backports InRelease [127 kB]
0% [4 InRelease 2588 B/127 kB 2%] [Waiting for headers]
Get:5 http://security.ubuntu.com/ubuntu jammy-security/restricted amd64 Packages [5441 kB]
0% [4 InRelease 12.7 kB/127 kB 10%] [5 Packages 2655 B/5441 kB 0%]
0% [5 Packages 113 kB/5441 kB 2%]
19% [Waiting for headers] [5 Packages 163 kB/5441 kB 3%]
Get:6 http://archive.ubuntu.com/ubuntu jammy-updates/universe amd64 Packages [1581 kB]
20% [6 Packages 2655 B/1581 kB 0%] [5 Packages 252 kB/5441 kB 5%]
44% [Waiting for headers] [5 Packages 3300 kB/5441 kB 61%]
Get:7 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 Packages [3626 kB]
44% [7 Packages 62.9 kB/3626 kB 2%] [5 Packages 3300 kB/5441 kB 61%]
44% [6 Packages store 0 B] [7 Packages 62.9 kB/3626 kB 2%] [5 Packages 3300 kB/
55% [7 Packages 809 kB/3626 kB 22%] [5 Packages 4720 kB/5441 kB 87%]
61% [7 Packages 1195 kB/3626 kB 33%]
61% [5 Packages store 0 B] [7 Packages 1195 kB/3626 kB 33%]
73% [5 Packages store 0 B] [Waiting for headers]
Get:8 http://security.ubuntu.com/ubuntu jammy-security/main amd64 Packages [3311 kB]
74% [5 Packages store 0 B] [8 Packages 32.8 kB/3311 kB 1%]
90% [5 Packages store 0 B] [Waiting for headers]
Get:9 http://security.ubuntu.com/ubuntu jammy-security/universe amd64 Packages [1274 kB]
90% [5 Packages store 0 B] [9 Packages 0 B/1274 kB 0%]
97% [9 Packages 1108 kB/1274 kB 87%]
97% [7 Packages store 0 B] [9 Packages 1108 kB/1274 kB 87%]
97% [7 Packages store 0 B] [Waiting for headers]
Get:10 http://security.ubuntu.com/ubuntu jammy-security/multiverse amd64 Packages [80.3 kB]
98% [7 Packages store 0 B] [10 Packages 28.7 kB/80.3 kB 36%]
98% [7 Packages store 0 B]
98% [Working]
98% [8 Packages store 0 B]
99% [Working]
99% [9 Packages store 0 B]
99% [Working]
99% [10 Packages store 0 B]
100% [Working]
Fetched 15.7 MB in 2s (9848 kB/s)
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 3%
Reading package lists... 3%
Reading package lists... 4%
Reading package lists... 4%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 52%
Reading package lists... 52%
Reading package lists... 67%
Reading package lists... 67%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 81%
Reading package lists... 81%
Reading package lists... 96%
Reading package lists... 96%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... Done
ASSISTANT
Show reasoning
We need to install build dependencies: build-essential, autoconf, libssl-dev, libbrotli-dev, zlib1g-dev, libzstd-dev, maybe pkg-config. Then extract tar.gz, configure with prefix /home/peter/result, enable ssl, brotli, zlib, zstd, maybe --with-ssl, --with-brotli, --with-zstd. Then make -j$(nproc) and make install. Then create symlink /home/peter/result/curl pointing to binary (likely /home/peter/result/bin/curl). Let's proceed.
compile-bench> sudo apt-get install -y build-essential autoconf libssl-dev libbrotli-dev zlib1g-dev libzstd-dev pkg-config
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 3%
Reading package lists... 3%
Reading package lists... 4%
Reading package lists... 4%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 52%
Reading package lists... 52%
Reading package lists... 67%
Reading package lists... 67%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 81%
Reading package lists... 81%
Reading package lists... 96%
Reading package lists... 96%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... Done
Building dependency tree... 0%
Building dependency tree... 0%
Building dependency tree... 50%
Building dependency tree... 50%
Building dependency tree... Done
Reading state information... 0%
Reading state information... 1%
Reading state information... Done
build-essential is already the newest version (12.9ubuntu3).
The following additional packages will be installed:
automake autotools-dev libglib2.0-0 libglib2.0-data libicu70 libsigsegv2
libxml2 m4 shared-mime-info xdg-user-dirs
Suggested packages:
autoconf-archive gnu-standards autoconf-doc libtool gettext libssl-doc
m4-doc
The following NEW packages will be installed:
autoconf automake autotools-dev libbrotli-dev libglib2.0-0 libglib2.0-data
libicu70 libsigsegv2 libssl-dev libxml2 libzstd-dev m4 pkg-config
shared-mime-info xdg-user-dirs zlib1g-dev
0 upgraded, 16 newly installed, 0 to remove and 0 not upgraded.
Need to get 17.8 MB of archives.
After this operation, 64.7 MB of additional disk space will be used.
0% [Working]
Get:1 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libglib2.0-0 amd64 2.72.4-0ubuntu2.6 [1467 kB]
0% [1 libglib2.0-0 14.2 kB/1467 kB 1%]
8% [Waiting for headers]
Get:2 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libglib2.0-data all 2.72.4-0ubuntu2.6 [4698 B]
9% [Waiting for headers]
Get:3 http://archive.ubuntu.com/ubuntu jammy/main amd64 libicu70 amd64 70.1-2 [10.6 MB]
9% [3 libicu70 34.8 kB/10.6 MB 0%]
Get:4 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libxml2 amd64 2.9.13+dfsg-1ubuntu0.9 [764 kB]
58% [4 libxml2 69.4 kB/764 kB 9%]
63% [Waiting for headers]
Get:5 http://archive.ubuntu.com/ubuntu jammy/main amd64 shared-mime-info amd64 2.1-2 [454 kB]
63% [5 shared-mime-info 26.5 kB/454 kB 6%]
[command output truncated]
usly unselected package libsigsegv2:amd64.
Preparing to unpack .../06-libsigsegv2_2.13-1ubuntu3_amd64.deb ...
Unpacking libsigsegv2:amd64 (2.13-1ubuntu3) ...
Selecting previously unselected package m4.
Preparing to unpack .../07-m4_1.4.18-5ubuntu2_amd64.deb ...
Unpacking m4 (1.4.18-5ubuntu2) ...
Selecting previously unselected package autoconf.
Preparing to unpack .../08-autoconf_2.71-2_all.deb ...
Unpacking autoconf (2.71-2) ...
Selecting previously unselected package autotools-dev.
Preparing to unpack .../09-autotools-dev_20220109.1_all.deb ...
Unpacking autotools-dev (20220109.1) ...
Selecting previously unselected package automake.
Preparing to unpack .../10-automake_1%3a1.16.5-1.3_all.deb ...
Unpacking automake (1:1.16.5-1.3) ...
Selecting previously unselected package libbrotli-dev:amd64.
Preparing to unpack .../11-libbrotli-dev_1.0.9-2build6_amd64.deb ...
Unpacking libbrotli-dev:amd64 (1.0.9-2build6) ...
Selecting previously unselected package libssl-dev:amd64.
Preparing to unpack .../12-libssl-dev_3.0.2-0ubuntu1.19_amd64.deb ...
Unpacking libssl-dev:amd64 (3.0.2-0ubuntu1.19) ...
Selecting previously unselected package libzstd-dev:amd64.
Preparing to unpack .../13-libzstd-dev_1.4.8+dfsg-3build1_amd64.deb ...
Unpacking libzstd-dev:amd64 (1.4.8+dfsg-3build1) ...
Selecting previously unselected package pkg-config.
Preparing to unpack .../14-pkg-config_0.29.2-1ubuntu3_amd64.deb ...
Unpacking pkg-config (0.29.2-1ubuntu3) ...
Selecting previously unselected package zlib1g-dev:amd64.
Preparing to unpack .../15-zlib1g-dev_1%3a1.2.11.dfsg-2ubuntu9.2_amd64.deb ...
Unpacking zlib1g-dev:amd64 (1:1.2.11.dfsg-2ubuntu9.2) ...
Setting up libzstd-dev:amd64 (1.4.8+dfsg-3build1) ...
Setting up xdg-user-dirs (0.17-2ubuntu4) ...
Setting up libglib2.0-0:amd64 (2.72.4-0ubuntu2.6) ...
No schema files found: doing nothing.
Setting up autotools-dev (20220109.1) ...
Setting up libglib2.0-data (2.72.4-0ubuntu2.6) ...
Setting up libsigsegv2:amd64 (2.13-1ubuntu3) ...
Setting up libssl-dev:amd64 (3.0.2-0ubuntu1.19) ...
Setting up pkg-config (0.29.2-1ubuntu3) ...
Setting up zlib1g-dev:amd64 (1:1.2.11.dfsg-2ubuntu9.2) ...
Setting up libbrotli-dev:amd64 (1.0.9-2build6) ...
Setting up libicu70:amd64 (70.1-2) ...
Setting up m4 (1.4.18-5ubuntu2) ...
Setting up autoconf (2.71-2) ...
Setting up libxml2:amd64 (2.9.13+dfsg-1ubuntu0.9) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/automake.1.gz because associated file /usr/share/man/man1/automake-1.16.1.gz (of link group automake) doesn't exist
update-alternatives: warning: skip creation of /usr/share/man/man1/aclocal.1.gz because associated file /usr/share/man/man1/aclocal-1.16.1.gz (of link group automake) doesn't exist
Setting up shared-mime-info (2.1-2) ...
Processing triggers for libc-bin (2.35-0ubuntu3.10) ...
↓ 76 lines
compile-bench> sudo apt-get install -y build-essential autoconf libssl-dev libbrotli-dev zlib1g-dev libzstd-dev pkg-config
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 3%
Reading package lists... 3%
Reading package lists... 4%
Reading package lists... 4%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 52%
Reading package lists... 52%
Reading package lists... 67%
Reading package lists... 67%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 81%
Reading package lists... 81%
Reading package lists... 96%
Reading package lists... 96%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... Done
Building dependency tree... 0%
Building dependency tree... 0%
Building dependency tree... 50%
Building dependency tree... 50%
Building dependency tree... Done
Reading state information... 0%
Reading state information... 1%
Reading state information... Done
build-essential is already the newest version (12.9ubuntu3).
The following additional packages will be installed:
automake autotools-dev libglib2.0-0 libglib2.0-data libicu70 libsigsegv2
libxml2 m4 shared-mime-info xdg-user-dirs
Suggested packages:
autoconf-archive gnu-standards autoconf-doc libtool gettext libssl-doc
m4-doc
The following NEW packages will be installed:
autoconf automake autotools-dev libbrotli-dev libglib2.0-0 libglib2.0-data
libicu70 libsigsegv2 libssl-dev libxml2 libzstd-dev m4 pkg-config
shared-mime-info xdg-user-dirs zlib1g-dev
0 upgraded, 16 newly installed, 0 to remove and 0 not upgraded.
Need to get 17.8 MB of archives.
After this operation, 64.7 MB of additional disk space will be used.
0% [Working]
Get:1 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libglib2.0-0 amd64 2.72.4-0ubuntu2.6 [1467 kB]
0% [1 libglib2.0-0 14.2 kB/1467 kB 1%]
8% [Waiting for headers]
Get:2 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libglib2.0-data all 2.72.4-0ubuntu2.6 [4698 B]
9% [Waiting for headers]
Get:3 http://archive.ubuntu.com/ubuntu jammy/main amd64 libicu70 amd64 70.1-2 [10.6 MB]
9% [3 libicu70 34.8 kB/10.6 MB 0%]
Get:4 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libxml2 amd64 2.9.13+dfsg-1ubuntu0.9 [764 kB]
58% [4 libxml2 69.4 kB/764 kB 9%]
63% [Waiting for headers]
Get:5 http://archive.ubuntu.com/ubuntu jammy/main amd64 shared-mime-info amd64 2.1-2 [454 kB]
63% [5 shared-mime-info 26.5 kB/454 kB 6%]
[command output truncated]
usly unselected package libsigsegv2:amd64.
Preparing to unpack .../06-libsigsegv2_2.13-1ubuntu3_amd64.deb ...
Unpacking libsigsegv2:amd64 (2.13-1ubuntu3) ...
Selecting previously unselected package m4.
Preparing to unpack .../07-m4_1.4.18-5ubuntu2_amd64.deb ...
Unpacking m4 (1.4.18-5ubuntu2) ...
Selecting previously unselected package autoconf.
Preparing to unpack .../08-autoconf_2.71-2_all.deb ...
Unpacking autoconf (2.71-2) ...
Selecting previously unselected package autotools-dev.
Preparing to unpack .../09-autotools-dev_20220109.1_all.deb ...
Unpacking autotools-dev (20220109.1) ...
Selecting previously unselected package automake.
Preparing to unpack .../10-automake_1%3a1.16.5-1.3_all.deb ...
Unpacking automake (1:1.16.5-1.3) ...
Selecting previously unselected package libbrotli-dev:amd64.
Preparing to unpack .../11-libbrotli-dev_1.0.9-2build6_amd64.deb ...
Unpacking libbrotli-dev:amd64 (1.0.9-2build6) ...
Selecting previously unselected package libssl-dev:amd64.
Preparing to unpack .../12-libssl-dev_3.0.2-0ubuntu1.19_amd64.deb ...
Unpacking libssl-dev:amd64 (3.0.2-0ubuntu1.19) ...
Selecting previously unselected package libzstd-dev:amd64.
Preparing to unpack .../13-libzstd-dev_1.4.8+dfsg-3build1_amd64.deb ...
Unpacking libzstd-dev:amd64 (1.4.8+dfsg-3build1) ...
Selecting previously unselected package pkg-config.
Preparing to unpack .../14-pkg-config_0.29.2-1ubuntu3_amd64.deb ...
Unpacking pkg-config (0.29.2-1ubuntu3) ...
Selecting previously unselected package zlib1g-dev:amd64.
Preparing to unpack .../15-zlib1g-dev_1%3a1.2.11.dfsg-2ubuntu9.2_amd64.deb ...
Unpacking zlib1g-dev:amd64 (1:1.2.11.dfsg-2ubuntu9.2) ...
Setting up libzstd-dev:amd64 (1.4.8+dfsg-3build1) ...
Setting up xdg-user-dirs (0.17-2ubuntu4) ...
Setting up libglib2.0-0:amd64 (2.72.4-0ubuntu2.6) ...
No schema files found: doing nothing.
Setting up autotools-dev (20220109.1) ...
Setting up libglib2.0-data (2.72.4-0ubuntu2.6) ...
Setting up libsigsegv2:amd64 (2.13-1ubuntu3) ...
Setting up libssl-dev:amd64 (3.0.2-0ubuntu1.19) ...
Setting up pkg-config (0.29.2-1ubuntu3) ...
Setting up zlib1g-dev:amd64 (1:1.2.11.dfsg-2ubuntu9.2) ...
Setting up libbrotli-dev:amd64 (1.0.9-2build6) ...
Setting up libicu70:amd64 (70.1-2) ...
Setting up m4 (1.4.18-5ubuntu2) ...
Setting up autoconf (2.71-2) ...
Setting up libxml2:amd64 (2.9.13+dfsg-1ubuntu0.9) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/automake.1.gz because associated file /usr/share/man/man1/automake-1.16.1.gz (of link group automake) doesn't exist
update-alternatives: warning: skip creation of /usr/share/man/man1/aclocal.1.gz because associated file /usr/share/man/man1/aclocal-1.16.1.gz (of link group automake) doesn't exist
Setting up shared-mime-info (2.1-2) ...
Processing triggers for libc-bin (2.35-0ubuntu3.10) ...
ASSISTANT
Show reasoning
We have installed build tools and dependencies. Next steps: extract curl source from /home/peter/curl.tar.gz, configure with SSL, brotli, zlib, zstd, TLS v1.3 (OpenSSL 3 provides that). Use proper prefix to install into /home/peter/result. Then make and make install. Finally symlink /home/peter/result/curl to the binary location (likely /home/peter/result/bin/curl). Let's extract.
compile-bench> mkdir -p /home/peter/build && tar -xf /home/peter/curl.tar.gz -C /home/peter/build
[empty output]
ASSISTANT
Show reasoning
We need to compile curl with SSL (TLS1.3), brotli, zlib, zstd support. The source probably extracts to a directory like curl-8.16.0. Need to configure with appropriate flags: --with-ssl (or --with-openssl), --with-brotli, --with-zlib, --with-zstd. Also enable TLS1.3 is provided by OpenSSL.
Install to /home/peter/result. Then create symlink /home/peter/result/curl -> actual binary (maybe /home/peter/result/bin/curl). So steps:
1. Extract tar.gz already done.
2. Find source directory. List /home/peter/build.
compile-bench> ls -1 /home/peter/build
curl-8.16.0
ASSISTANT
Show reasoning
We need to compile curl with SSL (TLS 1.3), brotli, zlib, zstd. Use configure options: --with-ssl (or --with-openssl) will use OpenSSL (already installed libssl-dev). Enable brotli: --with-brotli (requires libbrotli-dev). Enable zstd: --with-zstd. Enable zlib: default. Ensure TLS 1.3 is supported by OpenSSL 3.0 (Ubuntu 22.04 has 3.0). We'll configure.
Set prefix to /home/peter/result, then after make install, we need to create symlink from /home/peter/result/curl to actual binary? Actually "Create a symlink from /home/peter/result/curl to the actual binary." Possibly they want /home/peter/result/curl to point to /home/peter/result/bin/curl (the binary). So after install, create symlink.
Steps:
- cd to source dir.
- Run ./configure with appropriate flags: --prefix=/home/peter/result --with-ssl --with-brotli --with-zstd --with-zlib (maybe default). Possibly need --enable-http --enable-ftp etc default.
- make -j$(nproc)
- make install
- Then ln -sf /home/peter/result/bin/curl /home/peter/result/curl
Need to ensure environment variable PKG_CONFIG_PATH includes /usr/lib/x86_64-linux-gnu/pkgconfig (should be automatic). Should work.
Let's compile.
compile-bench> cd /home/peter/build/curl-8.16.0 && ./configure --prefix=/home/peter/result --with-ssl --with-brotli --with-zstd && make -j$(nproc) checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for ar... /usr/bin/ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking how to run the C preprocessor... gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for grep that handles long lines and -e... (cached) /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking if OS is AIX (to define _ALL_SOURCE)... no
checking if _THREAD_SAFE is already defin
[command output truncated]
ibrary is required... no
checking for gethostbyname... yes
checking whether build target is a native Windows one... (cached) no
checking for proto/bsdsocket.h... no
checking for connect in libraries... yes
checking for sys/types.h... (cached) yes
checking for monotonic clock_gettime... yes
checking for clock_gettime in libraries... no additional lib required
checking if monotonic clock_gettime works... yes
checking for sys/types.h... (cached) yes
checking for raw monotonic clock_gettime... yes
checking for pkg-config... /usr/bin/pkg-config
checking for zlib options with pkg-config... found
checking for zlib.h... yes
configure: found both libz and libz.h header
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libbrotlidec options with pkg-config... found
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libbrotlicommon options with pkg-config... found
checking for BrotliDecoderDecompress in -lbrotlidec... yes
checking for brotli/decode.h... yes
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libzstd options with pkg-config... found
checking for ZSTD_createDStream in -lzstd... yes
checking for zstd.h... yes
checking whether to enable IPv6... yes
checking if struct sockaddr_in6 has sin6_scope_id member... yes
checking if argv can be written to... yes
checking if GSS-API support is requested... no
checking whether to enable Windows native SSL/TLS... no
checking whether to enable Amiga native SSL/TLS (AmiSSL v5)... no
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for openssl options with pkg-config... found
configure: pkg-config: SSL_LIBS: "-lssl -lcrypto"
configure: pkg-config: SSL_LDFLAGS: ""
configure: pkg-config: SSL_CPPFLAGS: ""
checking for HMAC_Update in -lcrypto... yes
checking for SSL_connect in -lssl... yes
checking for openssl/x509.h... yes
checking for openssl/rsa.h... yes
checking for openssl/crypto.h... yes
checking for openssl/pem.h... yes
checking for openssl/ssl.h... yes
checking for openssl/err.h... yes
checking for BoringSSL... no
checking for AWS-LC... no
checking for LibreSSL... no
checking for OpenSSL >= v3... yes
checking for SSL_set_quic_use_legacy_codepoint... no
checking for SSL_set_quic_tls_cbs... no
configure: OpenSSL version does not speak any known QUIC API
checking for SRP support in OpenSSL... yes
checking for QUIC support and OpenSSL >= 3.3... no
configure: built with one SSL backend
checking default CA cert bundle/path... configure: want unset ca /etc/ssl/certs/ca-certificates.crt
/etc/ssl/certs/ca-certificates.crt
/etc/ssl/certs (capath)
checking whether to use OpenSSL's built-in CA store... no
checking CA cert bundle path to embed in the curl tool... no
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libpsl options with pkg-config... no
checking for psl_builtin in -lpsl... no
configure: error: libpsl libs and/or directories were not found where specified!
↓ 132 lines
compile-bench> cd /home/peter/build/curl-8.16.0 && ./configure --prefix=/home/peter/result --with-ssl --with-brotli --with-zstd && make -j$(nproc)
checking whether to enable maintainer-specific portions of Makefiles... no checking whether make supports nested variables... yes checking whether to enable debug build options... no checking whether to enable compiler optimizer... (assumed) yes checking whether to enable strict compiler warnings... no checking whether to enable compiler warnings as errors... no checking whether to enable curl debug memory tracking... no checking whether to enable hiding of library internal symbols... yes checking whether to enable c-ares for DNS lookups... no checking whether to disable dependency on -lrt... (assumed no) checking whether to enable HTTPSRR support... no checking whether to enable ECH support... no checking whether to enable SSL session export support... no checking for path separator... : checking for sed... /usr/bin/sed checking for grep... /usr/bin/grep checking that grep -E works... yes checking for ar... /usr/bin/ar checking for a BSD-compatible install... /usr/bin/install -c checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking how to run the C preprocessor... gcc -E checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for stdatomic.h... yes checking if _Atomic is available... yes checking for a sed that does not truncate output... (cached) /usr/bin/sed checking for code coverage support... no checking whether build environment is sane... yes checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... gcc3 checking curl version... 8.16.0 checking for perl... /usr/bin/perl checking for httpd... no checking for apache2... no checking for apxs... no configure: httpd/apache2 not in PATH, http tests disabled configure: apxs not in PATH, http tests disabled checking for danted... no checking for danted... no checking for nghttpx... no checking for caddy... no checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... /usr/bin/grep -E checking if OS is AIX (to define _ALL_SOURCE)... no checking if _THREAD_SAFE is already defin [command output truncated] ibrary is required... no checking for gethostbyname... yes checking whether build target is a native Windows one... (cached) no checking for proto/bsdsocket.h... no checking for connect in libraries... yes checking for sys/types.h... (cached) yes checking for monotonic clock_gettime... yes checking for clock_gettime in libraries... no additional lib required checking if monotonic clock_gettime works... yes checking for sys/types.h... (cached) yes checking for raw monotonic clock_gettime... yes checking for pkg-config... /usr/bin/pkg-config checking for zlib options with pkg-config... found checking for zlib.h... yes configure: found both libz and libz.h header checking for pkg-config... (cached) /usr/bin/pkg-config checking for libbrotlidec options with pkg-config... found checking for pkg-config... (cached) /usr/bin/pkg-config checking for libbrotlicommon options with pkg-config... found checking for BrotliDecoderDecompress in -lbrotlidec... yes checking for brotli/decode.h... yes checking for pkg-config... (cached) /usr/bin/pkg-config checking for libzstd options with pkg-config... found checking for ZSTD_createDStream in -lzstd... yes checking for zstd.h... yes checking whether to enable IPv6... yes checking if struct sockaddr_in6 has sin6_scope_id member... yes checking if argv can be written to... yes checking if GSS-API support is requested... no checking whether to enable Windows native SSL/TLS... no checking whether to enable Amiga native SSL/TLS (AmiSSL v5)... no checking for pkg-config... (cached) /usr/bin/pkg-config checking for openssl options with pkg-config... found configure: pkg-config: SSL_LIBS: "-lssl -lcrypto" configure: pkg-config: SSL_LDFLAGS: "" configure: pkg-config: SSL_CPPFLAGS: "" checking for HMAC_Update in -lcrypto... yes checking for SSL_connect in -lssl... yes checking for openssl/x509.h... yes checking for openssl/rsa.h... yes checking for openssl/crypto.h... yes checking for openssl/pem.h... yes checking for openssl/ssl.h... yes checking for openssl/err.h... yes checking for BoringSSL... no checking for AWS-LC... no checking for LibreSSL... no checking for OpenSSL >= v3... yes checking for SSL_set_quic_use_legacy_codepoint... no checking for SSL_set_quic_tls_cbs... no configure: OpenSSL version does not speak any known QUIC API checking for SRP support in OpenSSL... yes checking for QUIC support and OpenSSL >= 3.3... no configure: built with one SSL backend checking default CA cert bundle/path... configure: want unset ca /etc/ssl/certs/ca-certificates.crt /etc/ssl/certs/ca-certificates.crt /etc/ssl/certs (capath) checking whether to use OpenSSL's built-in CA store... no checking CA cert bundle path to embed in the curl tool... no checking for pkg-config... (cached) /usr/bin/pkg-config checking for libpsl options with pkg-config... no checking for psl_builtin in -lpsl... no configure: error: libpsl libs and/or directories were not found where specified!
ASSISTANT
Show reasoning
The configure failed because libpsl is missing. We need to install libpsl-dev (or disable psl). The user didn't request psl, so we can install libpsl-dev to satisfy configure. Let's install libpsl-dev.
compile-bench> sudo apt-get install -y libpsl-dev
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 3%
Reading package lists... 3%
Reading package lists... 4%
Reading package lists... 4%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 52%
Reading package lists... 52%
Reading package lists... 67%
Reading package lists... 67%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 81%
Reading package lists... 81%
Reading package lists... 96%
Reading package lists... 96%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... Done
Building dependency tree... 0%
Building dependency tree... 0%
Building dependency tree... 50%
Building dependency tree... 50%
Building dependency tree... Done
Reading state information... 0%
Reading state information... 1%
Reading state information... Done
The following NEW packages will be installed:
libpsl-dev
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 77.9 kB of archives.
After this operation, 214 kB of additional disk space will be used.
0% [Working]
Get:1 http://archive.ubuntu.com/ubuntu jammy/main amd64 libpsl-dev amd64 0.21.0-1.2build2 [77.9 kB]
15% [1 libpsl-dev 14.2 kB/77.9 kB 18%]
100% [Working]
Fetched 77.9 kB in 0s (183 kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package libpsl-dev:amd64.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 11594 files and directories currently installed.)
Preparing to unpack .../libpsl-dev_0.21.0-1.2build2_amd64.deb ...
Unpacking libpsl-dev:amd64 (0.21.0-1.2build2) ...
Setting up libpsl-dev:amd64 (0.21.0-1.2build2) ...
↓ 17 lines
compile-bench> sudo apt-get install -y libpsl-dev
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 3%
Reading package lists... 3%
Reading package lists... 4%
Reading package lists... 4%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 52%
Reading package lists... 52%
Reading package lists... 67%
Reading package lists... 67%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 81%
Reading package lists... 81%
Reading package lists... 96%
Reading package lists... 96%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... Done
Building dependency tree... 0%
Building dependency tree... 0%
Building dependency tree... 50%
Building dependency tree... 50%
Building dependency tree... Done
Reading state information... 0%
Reading state information... 1%
Reading state information... Done
The following NEW packages will be installed:
libpsl-dev
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 77.9 kB of archives.
After this operation, 214 kB of additional disk space will be used.
0% [Working]
Get:1 http://archive.ubuntu.com/ubuntu jammy/main amd64 libpsl-dev amd64 0.21.0-1.2build2 [77.9 kB]
15% [1 libpsl-dev 14.2 kB/77.9 kB 18%]
100% [Working]
Fetched 77.9 kB in 0s (183 kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package libpsl-dev:amd64.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 11594 files and directories currently installed.)
Preparing to unpack .../libpsl-dev_0.21.0-1.2build2_amd64.deb ...
Unpacking libpsl-dev:amd64 (0.21.0-1.2build2) ...
Setting up libpsl-dev:amd64 (0.21.0-1.2build2) ...
ASSISTANT
Show reasoning
Now configure again.
compile-bench> cd /home/peter/build/curl-8.16.0 && ./configure --prefix=/home/peter/result --with-ssl --with-brotli --with-zstd && make -j$(nproc) checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for ar... /usr/bin/ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking how to run the C preprocessor... gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for grep that handles long lines and -e... (cached) /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking if OS is AIX (to define _ALL_SOURCE)... no
checking if _THREAD_SAFE is already defin
[command output truncated]
n_win32.o
CC ../lib/curlx/curl-wait.o
CC ../lib/curlx/curl-warnless.o
CC curlinfo.o
CC libcurltool_la-config2setopts.lo
CC libcurltool_la-slist_wc.lo
CC libcurltool_la-terminal.lo
CC libcurltool_la-tool_bname.lo
CC libcurltool_la-tool_cb_dbg.lo
CC libcurltool_la-tool_cb_hdr.lo
CC libcurltool_la-tool_cb_prg.lo
CC libcurltool_la-tool_cb_rea.lo
CC libcurltool_la-tool_cb_see.lo
CC libcurltool_la-tool_cb_soc.lo
CC libcurltool_la-tool_cb_wrt.lo
CC libcurltool_la-tool_cfgable.lo
CC libcurltool_la-tool_dirhie.lo
CC libcurltool_la-tool_doswin.lo
CC libcurltool_la-tool_easysrc.lo
CC libcurltool_la-tool_filetime.lo
CC libcurltool_la-tool_findfile.lo
CC libcurltool_la-tool_formparse.lo
CC libcurltool_la-tool_getparam.lo
CC libcurltool_la-tool_getpass.lo
CC libcurltool_la-tool_help.lo
CC libcurltool_la-tool_helpers.lo
CC libcurltool_la-tool_ipfs.lo
CC libcurltool_la-tool_libinfo.lo
CC libcurltool_la-tool_listhelp.lo
CC libcurltool_la-tool_main.lo
CC libcurltool_la-tool_msgs.lo
CC libcurltool_la-tool_operate.lo
CC libcurltool_la-tool_operhlp.lo
CC libcurltool_la-tool_paramhlp.lo
CC libcurltool_la-tool_parsecfg.lo
CC libcurltool_la-tool_progress.lo
CC libcurltool_la-tool_setopt.lo
CC libcurltool_la-tool_ssls.lo
CC libcurltool_la-tool_stderr.lo
CC libcurltool_la-tool_strdup.lo
CC libcurltool_la-tool_urlglob.lo
CC libcurltool_la-tool_util.lo
CC libcurltool_la-tool_vms.lo
CC libcurltool_la-tool_writeout.lo
CC libcurltool_la-tool_writeout_json.lo
CC libcurltool_la-tool_xattr.lo
CC libcurltool_la-var.lo
CC ../lib/curlx/libcurltool_la-base64.lo
CC ../lib/curlx/libcurltool_la-multibyte.lo
CC ../lib/curlx/libcurltool_la-dynbuf.lo
CC ../lib/curlx/libcurltool_la-nonblock.lo
CC ../lib/curlx/libcurltool_la-strparse.lo
CC ../lib/curlx/libcurltool_la-timediff.lo
CC ../lib/curlx/libcurltool_la-timeval.lo
CC ../lib/curlx/libcurltool_la-version_win32.lo
CC ../lib/curlx/libcurltool_la-wait.lo
CC ../lib/curlx/libcurltool_la-warnless.lo
CC curl-tool_hugehelp.o
CC curl-tool_ca_embed.o
CCLD curlinfo
CCLD libcurltool.la
CCLD curl
make[1]: Leaving directory '/home/peter/build/curl-8.16.0/src'
Making all in scripts
make[1]: Entering directory '/home/peter/build/curl-8.16.0/scripts'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/home/peter/build/curl-8.16.0/scripts'
make[1]: Entering directory '/home/peter/build/curl-8.16.0'
make[1]: Nothing to be done for 'all-am'.
make[1]: Leaving directory '/home/peter/build/curl-8.16.0'
↓ 139 lines
compile-bench> cd /home/peter/build/curl-8.16.0 && ./configure --prefix=/home/peter/result --with-ssl --with-brotli --with-zstd && make -j$(nproc)
checking whether to enable maintainer-specific portions of Makefiles... no checking whether make supports nested variables... yes checking whether to enable debug build options... no checking whether to enable compiler optimizer... (assumed) yes checking whether to enable strict compiler warnings... no checking whether to enable compiler warnings as errors... no checking whether to enable curl debug memory tracking... no checking whether to enable hiding of library internal symbols... yes checking whether to enable c-ares for DNS lookups... no checking whether to disable dependency on -lrt... (assumed no) checking whether to enable HTTPSRR support... no checking whether to enable ECH support... no checking whether to enable SSL session export support... no checking for path separator... : checking for sed... /usr/bin/sed checking for grep... /usr/bin/grep checking that grep -E works... yes checking for ar... /usr/bin/ar checking for a BSD-compatible install... /usr/bin/install -c checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking how to run the C preprocessor... gcc -E checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for stdatomic.h... yes checking if _Atomic is available... yes checking for a sed that does not truncate output... (cached) /usr/bin/sed checking for code coverage support... no checking whether build environment is sane... yes checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... gcc3 checking curl version... 8.16.0 checking for perl... /usr/bin/perl checking for httpd... no checking for apache2... no checking for apxs... no configure: httpd/apache2 not in PATH, http tests disabled configure: apxs not in PATH, http tests disabled checking for danted... no checking for danted... no checking for nghttpx... no checking for caddy... no checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... /usr/bin/grep -E checking if OS is AIX (to define _ALL_SOURCE)... no checking if _THREAD_SAFE is already defin [command output truncated] n_win32.o CC ../lib/curlx/curl-wait.o CC ../lib/curlx/curl-warnless.o CC curlinfo.o CC libcurltool_la-config2setopts.lo CC libcurltool_la-slist_wc.lo CC libcurltool_la-terminal.lo CC libcurltool_la-tool_bname.lo CC libcurltool_la-tool_cb_dbg.lo CC libcurltool_la-tool_cb_hdr.lo CC libcurltool_la-tool_cb_prg.lo CC libcurltool_la-tool_cb_rea.lo CC libcurltool_la-tool_cb_see.lo CC libcurltool_la-tool_cb_soc.lo CC libcurltool_la-tool_cb_wrt.lo CC libcurltool_la-tool_cfgable.lo CC libcurltool_la-tool_dirhie.lo CC libcurltool_la-tool_doswin.lo CC libcurltool_la-tool_easysrc.lo CC libcurltool_la-tool_filetime.lo CC libcurltool_la-tool_findfile.lo CC libcurltool_la-tool_formparse.lo CC libcurltool_la-tool_getparam.lo CC libcurltool_la-tool_getpass.lo CC libcurltool_la-tool_help.lo CC libcurltool_la-tool_helpers.lo CC libcurltool_la-tool_ipfs.lo CC libcurltool_la-tool_libinfo.lo CC libcurltool_la-tool_listhelp.lo CC libcurltool_la-tool_main.lo CC libcurltool_la-tool_msgs.lo CC libcurltool_la-tool_operate.lo CC libcurltool_la-tool_operhlp.lo CC libcurltool_la-tool_paramhlp.lo CC libcurltool_la-tool_parsecfg.lo CC libcurltool_la-tool_progress.lo CC libcurltool_la-tool_setopt.lo CC libcurltool_la-tool_ssls.lo CC libcurltool_la-tool_stderr.lo CC libcurltool_la-tool_strdup.lo CC libcurltool_la-tool_urlglob.lo CC libcurltool_la-tool_util.lo CC libcurltool_la-tool_vms.lo CC libcurltool_la-tool_writeout.lo CC libcurltool_la-tool_writeout_json.lo CC libcurltool_la-tool_xattr.lo CC libcurltool_la-var.lo CC ../lib/curlx/libcurltool_la-base64.lo CC ../lib/curlx/libcurltool_la-multibyte.lo CC ../lib/curlx/libcurltool_la-dynbuf.lo CC ../lib/curlx/libcurltool_la-nonblock.lo CC ../lib/curlx/libcurltool_la-strparse.lo CC ../lib/curlx/libcurltool_la-timediff.lo CC ../lib/curlx/libcurltool_la-timeval.lo CC ../lib/curlx/libcurltool_la-version_win32.lo CC ../lib/curlx/libcurltool_la-wait.lo CC ../lib/curlx/libcurltool_la-warnless.lo CC curl-tool_hugehelp.o CC curl-tool_ca_embed.o CCLD curlinfo CCLD libcurltool.la CCLD curl make[1]: Leaving directory '/home/peter/build/curl-8.16.0/src' Making all in scripts make[1]: Entering directory '/home/peter/build/curl-8.16.0/scripts' make[1]: Nothing to be done for 'all'. make[1]: Leaving directory '/home/peter/build/curl-8.16.0/scripts' make[1]: Entering directory '/home/peter/build/curl-8.16.0' make[1]: Nothing to be done for 'all-am'. make[1]: Leaving directory '/home/peter/build/curl-8.16.0'
ASSISTANT
Show reasoning
We have built curl successfully. Now need to install to /home/peter/result, and create a symlink from /home/peter/result/curl to the actual binary.
The make install step hasn't been run yet. Let's run make install with proper prefix (already configured). Also ensure we have the binary path.
We'll run make install. Then symlink.
compile-bench> cd /home/peter/build/curl-8.16.0 && make install Making install in lib
make[1]: Entering directory '/home/peter/build/curl-8.16.0/lib'
make[2]: Entering directory '/home/peter/build/curl-8.16.0/lib'
/usr/bin/mkdir -p '/home/peter/result/lib'
/bin/bash ../libtool --mode=install /usr/bin/install -c libcurl.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libcurl.so.4.8.0 /home/peter/result/lib/libcurl.so.4.8.0
libtool: install: (cd /home/peter/result/lib && { ln -s -f libcurl.so.4.8.0 libcurl.so.4 || { rm -f libcurl.so.4 && ln -s libcurl.so.4.8.0 libcurl.so.4; }; })
libtool: install: (cd /home/peter/result/lib && { ln -s -f libcurl.so.4.8.0 libcurl.so || { rm -f libcurl.so && ln -s libcurl.so.4.8.0 libcurl.so; }; })
libtool: install: /usr/bin/install -c .libs/libcurl.lai /home/peter/result/lib/libcurl.la
libtool: install: /usr/bin/install -c .libs/libcurl.a /home/peter/result/lib/libcurl.a
libtool: install: chmod 644 /home/peter/result/lib/libcurl.a
libtool: install: ranlib /home/peter/result/lib/libcurl.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
/home/peter/result/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/peter/build/curl-8.16.0/lib'
make[1]: Leaving directory '/home/peter/build/curl-8.16.0/lib'
Making install in docs
make[1]: Entering directory '/home/peter/build/curl-8.16.0/docs'
Making install in .
make[2]: Entering directory '/home/peter/build/curl-8.16.0/docs'
make[3]: Entering directory '/home/peter/build/curl-8.16.0/docs'
make[3]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/home/peter/result/share/man/man1'
/usr/bin/install -c -m 644 curl-config.1 wcurl.1 '/home/peter/result/share/man/man1'
make[3]: Leaving directory '/home/peter/build/curl-8.16.0/docs'
make[2]: Leaving directory '/home/peter/build/curl-8.16.0/docs'
Making install in cmdline-opts
make[2]: Entering directory '/home/peter/build/curl-8.16.0/docs/cmdline-opts'
make[3]: Entering directory '/home/peter/build/curl-8.16.0/docs/cmdline-opts'
make[3]: Nothing to be done for 'install-exec
[command output truncated]
s'
make[5]: Leaving directory '/home/peter/build/curl-8.16.0/docs/libcurl/opts'
make[5]: Entering directory '/home/peter/build/curl-8.16.0/docs/libcurl'
make[6]: Entering directory '/home/peter/build/curl-8.16.0/docs/libcurl'
make[6]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/home/peter/result/share/aclocal'
/usr/bin/install -c -m 644 libcurl.m4 '/home/peter/result/share/aclocal'
/usr/bin/mkdir -p '/home/peter/result/share/man/man3'
/usr/bin/install -c -m 644 curl_easy_cleanup.3 curl_easy_duphandle.3 curl_easy_escape.3 curl_easy_getinfo.3 curl_easy_header.3 curl_easy_init.3 curl_easy_nextheader.3 curl_easy_option_by_id.3 curl_easy_option_by_name.3 curl_easy_option_next.3 curl_easy_pause.3 curl_easy_perform.3 curl_easy_recv.3 curl_easy_reset.3 curl_easy_send.3 curl_easy_setopt.3 curl_easy_ssls_export.3 curl_easy_ssls_import.3 curl_easy_strerror.3 curl_easy_unescape.3 curl_easy_upkeep.3 curl_escape.3 curl_formadd.3 curl_formfree.3 curl_formget.3 curl_free.3 curl_getdate.3 curl_getenv.3 curl_global_cleanup.3 curl_global_init.3 curl_global_init_mem.3 curl_global_sslset.3 curl_global_trace.3 curl_mime_addpart.3 curl_mime_data.3 curl_mime_data_cb.3 curl_mime_encoder.3 curl_mime_filedata.3 curl_mime_filename.3 curl_mime_free.3 '/home/peter/result/share/man/man3'
/usr/bin/install -c -m 644 curl_mime_headers.3 curl_mime_init.3 curl_mime_name.3 curl_mime_subparts.3 curl_mime_type.3 curl_mprintf.3 curl_multi_add_handle.3 curl_multi_assign.3 curl_multi_cleanup.3 curl_multi_fdset.3 curl_multi_get_handles.3 curl_multi_get_offt.3 curl_multi_info_read.3 curl_multi_init.3 curl_multi_perform.3 curl_multi_poll.3 curl_multi_remove_handle.3 curl_multi_setopt.3 curl_multi_socket.3 curl_multi_socket_action.3 curl_multi_socket_all.3 curl_multi_strerror.3 curl_multi_timeout.3 curl_multi_wait.3 curl_multi_waitfds.3 curl_multi_wakeup.3 curl_pushheader_byname.3 curl_pushheader_bynum.3 curl_share_cleanup.3 curl_share_init.3 curl_share_setopt.3 curl_share_strerror.3 curl_slist_append.3 curl_slist_free_all.3 curl_strequal.3 curl_strnequal.3 curl_unescape.3 curl_url.3 curl_url_cleanup.3 curl_url_dup.3 '/home/peter/result/share/man/man3'
/usr/bin/install -c -m 644 curl_url_get.3 curl_url_set.3 curl_url_strerror.3 curl_version.3 curl_version_info.3 curl_ws_meta.3 curl_ws_recv.3 curl_ws_send.3 curl_ws_start_frame.3 libcurl-easy.3 libcurl-env-dbg.3 libcurl-env.3 libcurl-errors.3 libcurl-multi.3 libcurl-security.3 libcurl-share.3 libcurl-symbols.3 libcurl-thread.3 libcurl-tutorial.3 libcurl-url.3 libcurl-ws.3 libcurl.3 '/home/peter/result/share/man/man3'
make[6]: Leaving directory '/home/peter/build/curl-8.16.0/docs/libcurl'
make[5]: Leaving directory '/home/peter/build/curl-8.16.0/docs/libcurl'
make[4]: Leaving directory '/home/peter/build/curl-8.16.0/docs/libcurl'
make[3]: Leaving directory '/home/peter/build/curl-8.16.0'
make[2]: Leaving directory '/home/peter/build/curl-8.16.0'
make[1]: Leaving directory '/home/peter/build/curl-8.16.0'
↓ 67 lines
compile-bench> cd /home/peter/build/curl-8.16.0 && make install
Making install in lib
make[1]: Entering directory '/home/peter/build/curl-8.16.0/lib'
make[2]: Entering directory '/home/peter/build/curl-8.16.0/lib'
/usr/bin/mkdir -p '/home/peter/result/lib'
/bin/bash ../libtool --mode=install /usr/bin/install -c libcurl.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libcurl.so.4.8.0 /home/peter/result/lib/libcurl.so.4.8.0
libtool: install: (cd /home/peter/result/lib && { ln -s -f libcurl.so.4.8.0 libcurl.so.4 || { rm -f libcurl.so.4 && ln -s libcurl.so.4.8.0 libcurl.so.4; }; })
libtool: install: (cd /home/peter/result/lib && { ln -s -f libcurl.so.4.8.0 libcurl.so || { rm -f libcurl.so && ln -s libcurl.so.4.8.0 libcurl.so; }; })
libtool: install: /usr/bin/install -c .libs/libcurl.lai /home/peter/result/lib/libcurl.la
libtool: install: /usr/bin/install -c .libs/libcurl.a /home/peter/result/lib/libcurl.a
libtool: install: chmod 644 /home/peter/result/lib/libcurl.a
libtool: install: ranlib /home/peter/result/lib/libcurl.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
/home/peter/result/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/peter/build/curl-8.16.0/lib'
make[1]: Leaving directory '/home/peter/build/curl-8.16.0/lib'
Making install in docs
make[1]: Entering directory '/home/peter/build/curl-8.16.0/docs'
Making install in .
make[2]: Entering directory '/home/peter/build/curl-8.16.0/docs'
make[3]: Entering directory '/home/peter/build/curl-8.16.0/docs'
make[3]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/home/peter/result/share/man/man1'
/usr/bin/install -c -m 644 curl-config.1 wcurl.1 '/home/peter/result/share/man/man1'
make[3]: Leaving directory '/home/peter/build/curl-8.16.0/docs'
make[2]: Leaving directory '/home/peter/build/curl-8.16.0/docs'
Making install in cmdline-opts
make[2]: Entering directory '/home/peter/build/curl-8.16.0/docs/cmdline-opts'
make[3]: Entering directory '/home/peter/build/curl-8.16.0/docs/cmdline-opts'
make[3]: Nothing to be done for 'install-exec
[command output truncated]
s'
make[5]: Leaving directory '/home/peter/build/curl-8.16.0/docs/libcurl/opts'
make[5]: Entering directory '/home/peter/build/curl-8.16.0/docs/libcurl'
make[6]: Entering directory '/home/peter/build/curl-8.16.0/docs/libcurl'
make[6]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/home/peter/result/share/aclocal'
/usr/bin/install -c -m 644 libcurl.m4 '/home/peter/result/share/aclocal'
/usr/bin/mkdir -p '/home/peter/result/share/man/man3'
/usr/bin/install -c -m 644 curl_easy_cleanup.3 curl_easy_duphandle.3 curl_easy_escape.3 curl_easy_getinfo.3 curl_easy_header.3 curl_easy_init.3 curl_easy_nextheader.3 curl_easy_option_by_id.3 curl_easy_option_by_name.3 curl_easy_option_next.3 curl_easy_pause.3 curl_easy_perform.3 curl_easy_recv.3 curl_easy_reset.3 curl_easy_send.3 curl_easy_setopt.3 curl_easy_ssls_export.3 curl_easy_ssls_import.3 curl_easy_strerror.3 curl_easy_unescape.3 curl_easy_upkeep.3 curl_escape.3 curl_formadd.3 curl_formfree.3 curl_formget.3 curl_free.3 curl_getdate.3 curl_getenv.3 curl_global_cleanup.3 curl_global_init.3 curl_global_init_mem.3 curl_global_sslset.3 curl_global_trace.3 curl_mime_addpart.3 curl_mime_data.3 curl_mime_data_cb.3 curl_mime_encoder.3 curl_mime_filedata.3 curl_mime_filename.3 curl_mime_free.3 '/home/peter/result/share/man/man3'
/usr/bin/install -c -m 644 curl_mime_headers.3 curl_mime_init.3 curl_mime_name.3 curl_mime_subparts.3 curl_mime_type.3 curl_mprintf.3 curl_multi_add_handle.3 curl_multi_assign.3 curl_multi_cleanup.3 curl_multi_fdset.3 curl_multi_get_handles.3 curl_multi_get_offt.3 curl_multi_info_read.3 curl_multi_init.3 curl_multi_perform.3 curl_multi_poll.3 curl_multi_remove_handle.3 curl_multi_setopt.3 curl_multi_socket.3 curl_multi_socket_action.3 curl_multi_socket_all.3 curl_multi_strerror.3 curl_multi_timeout.3 curl_multi_wait.3 curl_multi_waitfds.3 curl_multi_wakeup.3 curl_pushheader_byname.3 curl_pushheader_bynum.3 curl_share_cleanup.3 curl_share_init.3 curl_share_setopt.3 curl_share_strerror.3 curl_slist_append.3 curl_slist_free_all.3 curl_strequal.3 curl_strnequal.3 curl_unescape.3 curl_url.3 curl_url_cleanup.3 curl_url_dup.3 '/home/peter/result/share/man/man3'
/usr/bin/install -c -m 644 curl_url_get.3 curl_url_set.3 curl_url_strerror.3 curl_version.3 curl_version_info.3 curl_ws_meta.3 curl_ws_recv.3 curl_ws_send.3 curl_ws_start_frame.3 libcurl-easy.3 libcurl-env-dbg.3 libcurl-env.3 libcurl-errors.3 libcurl-multi.3 libcurl-security.3 libcurl-share.3 libcurl-symbols.3 libcurl-thread.3 libcurl-tutorial.3 libcurl-url.3 libcurl-ws.3 libcurl.3 '/home/peter/result/share/man/man3'
make[6]: Leaving directory '/home/peter/build/curl-8.16.0/docs/libcurl'
make[5]: Leaving directory '/home/peter/build/curl-8.16.0/docs/libcurl'
make[4]: Leaving directory '/home/peter/build/curl-8.16.0/docs/libcurl'
make[3]: Leaving directory '/home/peter/build/curl-8.16.0'
make[2]: Leaving directory '/home/peter/build/curl-8.16.0'
make[1]: Leaving directory '/home/peter/build/curl-8.16.0'
ASSISTANT
Show reasoning
Now we need to create a symlink from /home/peter/result/curl to the actual binary. Let's locate the binary. Usually after make install, binary is installed into prefix/bin. Did we see that? Output didn't show bin install but probably there is a curl binary in /home/peter/result/bin/curl. We should check.
compile-bench> ls -l /home/peter/result/bin total 360
-rwxr-xr-x 1 peter peter 346464 Sep 16 20:39 curl
-rwxr-xr-x 1 peter peter 5091 Sep 16 20:39 curl-config
-rwxr-xr-x 1 peter peter 10622 Sep 16 20:39 wcurl
↓ 5 lines
compile-bench> ls -l /home/peter/result/bin
total 360 -rwxr-xr-x 1 peter peter 346464 Sep 16 20:39 curl -rwxr-xr-x 1 peter peter 5091 Sep 16 20:39 curl-config -rwxr-xr-x 1 peter peter 10622 Sep 16 20:39 wcurl
ASSISTANT
Show reasoning
We need to create a symlink from /home/peter/result/curl to the actual binary. The binary is at /home/peter/result/bin/curl. So create symlink /home/peter/result/curl -> bin/curl. Also verify SSL support TLS 1.3, brotli, zlib, zstd. We can run curl --version to see features.
compile-bench> /home/peter/result/bin/curl --version curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.2 zlib/1.2.11 brotli/1.0.9 zstd/1.4.8 libpsl/0.21.0
Release-Date: 2025-09-10
Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd
↓ 5 lines
compile-bench> /home/peter/result/bin/curl --version
curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.2 zlib/1.2.11 brotli/1.0.9 zstd/1.4.8 libpsl/0.21.0 Release-Date: 2025-09-10 Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd
ASSISTANT
Show reasoning
The user request: compile curl source at /home/peter/curl.tar.gz, install to /home/peter/result, create a symlink from /home/peter/result/curl to the actual binary. Ensure SSL support (TLS 1.3), brotli, zlib, zstd.
We have compiled and installed with those features enabled. The binary exists /home/peter/result/bin/curl, but they request a symlink from /home/peter/result/curl to the actual binary. Need to create symlink: /home/peter/result/curl -> /home/peter/result/bin/curl (or perhaps just /home/peter/result/curl). Let's create symlink.
Also verify TLS 1.3: OpenSSL 3.0.2 supports TLS 1.3, but confirm via curl --version includes SSL. The output shows "OpenSSL/3.0.2" and Features: SSL, etc. That satisfies.
Now create symlink.
compile-bench> ln -sfn /home/peter/result/bin/curl /home/peter/result/curl
[empty output]
ASSISTANT
Show reasoning
We have compiled curl with required features and installed to /home/peter/result. Created symlink /home/peter/result/curl pointing to binary. Need to verify symlink exists and points correctly. Also ensure TLS v1.3 support? OpenSSL 3.0.2 supports TLS 1.3. Could test with curl --tlsv1.3? Let's run version with features includes TLS? Already includes OpenSSL. We'll test a simple request with TLS 1.3 to a site.
compile-bench> /home/peter/result/bin/curl --tlsv1.3 -I https://www.google.com HTTP/1.1 200 OK
Content-Type: text/html; charset=ISO-8859-1
Content-Security-Policy-Report-Only: object-src 'none';base-uri 'self';script-src 'nonce-_jnsplB3zdOSXjKB6fAkZg' 'strict-dynamic' 'report-sample' 'unsafe-eval' 'unsafe-inline' https: http:;report-uri https://csp.withgoogle.com/csp/gws/other-hp
Accept-CH: Sec-CH-Prefers-Color-Scheme
P3P: CP="This is not a P3P policy! See g.co/p3phelp for more info."
Date: Tue, 16 Sep 2025 20:39:34 GMT
Server: gws
X-XSS-Protection: 0
X-Frame-Options: SAMEORIGIN
Transfer-Encoding: chunked
Expires: Tue, 16 Sep 2025 20:39:34 GMT
Cache-Control: private
Set-Cookie: AEC=AVh_V2iyr2-Q2G17Cn0066BBfBfUYU8656T0gFmg6h7Q1BmBjXSEkmPIGA8; expires=Sun, 15-Mar-2026 20:39:34 GMT; path=/; domain=.google.com; Secure; HttpOnly; SameSite=lax
Set-Cookie: NID=525=R5dHRQwHLgDOkU0J1o5XwapeDkQbpNOJ1FWDKG5cmv9LNEfWMEVvd8amWAV4X_-LIOpfQ8kJyfgy5sG_pUgTz2YAQjxKXU0KtHXobtg7q3anwDXmK706w2tmxi0bxpCx639vWjXLTPLm5dkQZT-hCe0IVHxFD-mNcXrRRrOKQ9_oMK_sJzQ-U2IMgQRxCKFv2iAepb90bNNDbwsJtE-Y; expires=Wed, 18-Mar-2026 20:39:34 GMT; path=/; domain=.google.com; HttpOnly
Alt-Svc: h3=":443"; ma=2592000,h3-29=":443"; ma=2592000
↓ 16 lines
compile-bench> /home/peter/result/bin/curl --tlsv1.3 -I https://www.google.com
HTTP/1.1 200 OK Content-Type: text/html; charset=ISO-8859-1 Content-Security-Policy-Report-Only: object-src 'none';base-uri 'self';script-src 'nonce-_jnsplB3zdOSXjKB6fAkZg' 'strict-dynamic' 'report-sample' 'unsafe-eval' 'unsafe-inline' https: http:;report-uri https://csp.withgoogle.com/csp/gws/other-hp Accept-CH: Sec-CH-Prefers-Color-Scheme P3P: CP="This is not a P3P policy! See g.co/p3phelp for more info." Date: Tue, 16 Sep 2025 20:39:34 GMT Server: gws X-XSS-Protection: 0 X-Frame-Options: SAMEORIGIN Transfer-Encoding: chunked Expires: Tue, 16 Sep 2025 20:39:34 GMT Cache-Control: private Set-Cookie: AEC=AVh_V2iyr2-Q2G17Cn0066BBfBfUYU8656T0gFmg6h7Q1BmBjXSEkmPIGA8; expires=Sun, 15-Mar-2026 20:39:34 GMT; path=/; domain=.google.com; Secure; HttpOnly; SameSite=lax Set-Cookie: NID=525=R5dHRQwHLgDOkU0J1o5XwapeDkQbpNOJ1FWDKG5cmv9LNEfWMEVvd8amWAV4X_-LIOpfQ8kJyfgy5sG_pUgTz2YAQjxKXU0KtHXobtg7q3anwDXmK706w2tmxi0bxpCx639vWjXLTPLm5dkQZT-hCe0IVHxFD-mNcXrRRrOKQ9_oMK_sJzQ-U2IMgQRxCKFv2iAepb90bNNDbwsJtE-Y; expires=Wed, 18-Mar-2026 20:39:34 GMT; path=/; domain=.google.com; HttpOnly Alt-Svc: h3=":443"; ma=2592000,h3-29=":443"; ma=2592000
ASSISTANT
Show reasoning
We have compiled curl, installed it to /home/peter/result, created symlink. Verify symlink exists and points to binary.
We should also ensure that SSL built with TLS 1.3 support (OpenSSL 3 supports). Already used --tlsv1.3 works.
Now final answer summarizing steps.
The curl source archive was unpacked, configured, compiled, and installed into /home/peter/result with the required features (SSL/TLS 1.3, Brotli, zlib, zstd, libpsl).
A symlink /home/peter/result/curl now points to the actual binary at /home/peter/result/bin/curl.
You can verify the installation:
```bash
/home/peter/result/bin/curl --version
Shows OpenSSL, zlib, brotli, zstd, libpsl – TLS‑1.3 support
/home/peter/result/curl --tlsv1.3 -I https://www.google.com
Returns a 200 OK response, confirming TLS‑1.3 works
```
Everything is set up as requested.
Task finished successfully, all checks passed!
Checks passed:
curl binary exists
curl version matches expected
curl downloaded the expected local file content
curl HTTPS request to google.com returned content-type: text/html
curl TLSv1.2 connection to google.com used TLSv1.2
curl TLSv1.3 connection to google.com used TLSv1.3
curl brotli compression test passed
curl gzip compression test passed
curl version shows zstd support