<- Ranking
Summary
Task
curl-ssl-arm64-static2
Model
claude-sonnet-4-thinking-16k logo
claude-sonnet-4-thinking-16k
Status
Success
Performance
Cost$1.602
Total elapsed time9m41s
LLM inference time6m26s
Command execution time3m16s
Commands executed73
All details >
Attempt ID 55r7ssuptc9su Attempt group run-16-09-22-05
Revision fb5c74bd2fee AWS Instance m8i.2xlarge
Start time 2025-09-16T22:02:08.913Z End time 2025-09-16T22:11:54.156Z
Task curl-ssl-arm64-static2 Environment ubuntu-22.04-amd64-cross-arm64
Model claude-sonnet-4-thinking-16k logo claude-sonnet-4-thinking-16k OpenRouter slug anthropic/claude-sonnet-4
Temperature 1 Explicit prompt caching true
User msg after tool call true Max tool calls 150
Total timeout seconds 3600 Single command timeout 1800
Cost $1.602 Duration 9m41s
LLM inference time 6m26s Command execution time 3m16s
Final context tokens 70,733 Total output tokens 15,399
Output reasoning tokens 6,095 Messages 149
Assistant messages 74 User messages 1
System messages 1 Commands executed 73
Download full attempt result JSON
Task
Task: curl-ssl-arm64-static2

curl 8.16.0 is a command-line HTTP client.
Project link: curl.se

Task:
Compile and install curl to a specific location. Build with SSL support (TLS v1.3), brotli, zlib and zstd. Cross-compile to arm64. Link it statically. This is a variant of curl-ssl-arm64-static, with a hint to do a trial run of compiled binary.

Difficulties:
Cross-compilation toolchain setup, manually cross-compiling all dependencies, properly configuring SSL certificates in OpenSSL.

Environment:
Ubuntu 22.04 on amd64, with internet access.

View task page
Execution log
SYSTEM

You are a package-building specialist operating a Ubuntu 22.04 bash shell via one tool: run_terminal_cmd.
The current working directory of every run_terminal_cmd is /home/peter.
Execution rules:
- Always pass non-interactive flags for any command that could prompt (e.g., -y, --yes, DEBIAN_FRONTEND=noninteractive).
- Don't include any newlines in the command.
- You can use sudo.
If you encounter any errors or issues while doing the user's request, you must fix them and continue the task.
At the end verify you did the user request correctly.

USER

You are given a curl v8.16.0 source code at /home/peter/curl.tar.gz. Please compile curl and install it to /home/peter/result. Create a symlink from /home/peter/result/curl to the actual binary. Make sure it builds with SSL support (TLS v1.3), brotli, zlib and zstd. The binary should be statically compiled for arm64. Do a trial run via qemu-aarch64-static, making sure this EXACT command works correctly: curl https://google.com

ASSISTANT
Show reasoning

This is a complex build task that involves:
1. Extracting the curl source code from the tar.gz file
2. Cross-compiling curl for arm64 architecture
3. Statically linking it with SSL (TLS v1.3), brotli, zlib, and zstd support
4. Installing it to /home/peter/result
5. Creating a symlink from /home/peter/result/curl to the actual binary
6. Testing it using qemu-aarch64-static

Let me break this down step by step:

1. First, I need to extract the source code
2. Install cross-compilation tools for arm64
3. Install/build the required static libraries for arm64 (OpenSSL, brotli, zlib, zstd)
4. Configure curl with the appropriate flags for static compilation and arm64
5. Build and install curl
6. Create the symlink
7. Test with qemu

Let me start by checking what's available and extracting the source.

I'll help you compile curl statically for arm64 with all the required features. Let me start by extracting the source code and setting up the build environment.

compile-bench> cd /home/peter && tar -tf curl.tar.gz | head -5
curl-8.16.0/
curl-8.16.0/.editorconfig
curl-8.16.0/CHANGES.md
curl-8.16.0/CMake/
curl-8.16.0/CMake/CMakeConfigurableFile.in
↓ 6 lines
ASSISTANT
Show reasoning

The user wants me to compile curl v8.16.0 statically for arm64 with specific requirements:
1. SSL support (TLS v1.3)
2. brotli
3. zlib
4. zstd
5. Static compilation for arm64
6. Install to /home/peter/result
7. Create symlink from /home/peter/result/curl to the actual binary
8. Test with qemu-aarch64-static using the exact command curl https://google.com

Let me start by extracting the source, then setting up the cross-compilation environment for arm64, installing dependencies, and building curl statically.

First, I need to extract the tar file, then install the cross-compilation tools and dependencies.

compile-bench> cd /home/peter && tar -xzf curl.tar.gz
[empty output]
ASSISTANT
Show reasoning

Let me continue with the curl compilation process. I need to:

1. Set up the cross-compilation environment for arm64
2. Install dependencies including SSL libraries, brotli, zlib, zstd for arm64
3. Configure curl with static linking and the required features
4. Compile it
5. Install to /home/peter/result
6. Create symlink
7. Test with qemu-aarch64-static

Let me start by installing the cross-compilation tools and dependencies.

compile-bench> cd /home/peter && ls -la
total 4108
drwxr-x---  1 peter peter    4096 Sep 16 22:02 .
drwxr-xr-x  1 root  root     4096 Sep 15 11:21 ..
-rw-r--r--  1 peter peter     220 Jan  6  2022 .bash_logout
-rw-r--r--  1 peter peter    3771 Jan  6  2022 .bashrc
-rw-r--r--  1 peter peter     807 Jan  6  2022 .profile
drwxr-xr-x 14 peter peter    4096 Sep 10 05:43 curl-8.16.0
-rw-r--r--  1 peter peter 4176617 Sep 16 22:02 curl.tar.gz
↓ 9 lines
ASSISTANT
Show reasoning

Good, the curl source code has been extracted. Now I need to set up the build environment for cross-compiling curl statically for arm64 with SSL support (TLS v1.3), brotli, zlib, and zstd. I'll need to:

1. Install the necessary build tools and cross-compilation toolchain for arm64
2. Install qemu-aarch64-static for testing
3. Build static versions of the dependencies (OpenSSL, brotli, zlib, zstd) for arm64
4. Configure and build curl statically for arm64
5. Install it to /home/peter/result
6. Create the symlink
7. Test with qemu-aarch64-static

Let me start by installing the necessary packages.

Now I'll set up the cross-compilation environment and install the necessary dependencies for building curl statically for arm64.

compile-bench> sudo apt update -y
0% [Working]
            
Hit:1 http://archive.ubuntu.com/ubuntu jammy InRelease

0% [Waiting for headers] [Waiting for headers]
                                              
Get:2 http://security.ubuntu.com/ubuntu jammy-security InRelease [129 kB]

0% [Waiting for headers] [2 InRelease 14.2 kB/129 kB 11%]
                                                         
Get:3 http://archive.ubuntu.com/ubuntu jammy-updates InRelease [128 kB]

0% [3 InRelease 14.2 kB/128 kB 11%] [2 InRelease 14.2 kB/129 kB 11%]
0% [3 InRelease 43.1 kB/128 kB 34%] [2 InRelease 51.8 kB/129 kB 40%]
                                                                    
0% [3 InRelease 118 kB/128 kB 92%]
                                  
0% [Working]
            
Get:4 http://archive.ubuntu.com/ubuntu jammy-backports InRelease [127 kB]

0% [4 InRelease 6932 B/127 kB 5%]
                                 
0% [Working]
0% [Working]
            
Get:5 http://security.ubuntu.com/ubuntu jammy-security/universe amd64 Packages [1274 kB]

0% [5 Packages 5551 B/1274 kB 0%]
0% [5 Packages 145 kB/1274 kB 11%]
                                  
Get:6 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 Packages [3638 kB]

0% [6 Packages 8447 B/3638 kB 0%] [5 Packages 272 kB/1274 kB 21%]
21% [6 Packages 256 kB/3638 kB 7%] [5 Packages 602 kB/1274 kB 47%]
                                                                  
25% [6 Packages 841 kB/3638 kB 23%]
25% [5 Packages store 0 B] [6 Packages 841 kB/3638 kB 23%]
                                                          
Get:7 http://security.ubuntu.com/ubuntu jammy-security/restricted amd64 Packages [5441 kB]

30% [5 Packages store 0 B] [6 Packages 1960 kB/3638 kB 54%] [7 Packages 31.6 kB
                                                                               
40% [6 Packages 3291 kB/3638 kB 90%] [7 Packages 1173 kB/5441 kB 22%]
                                                                     
42% [7 Packages 1368 kB/5441 kB 25%]
42% [6 Packages store 0 B] [7 Packages 1368 kB/5441 kB 25%]
                                                           
Get:8 http://archive.ubuntu.com/ubuntu jammy-updates/restricted amd64 Packages [5665 kB]

46% [6 Packages store 0 B] [8 Packages 37.4 kB/5665 kB 1%] [7 Packages 2606 kB/
73% [6 Packages store 0 B] [8 Packages 4297 kB/5665 kB 76%] [Waiting for header
                                                                               
Get:9 http://security.ubuntu.com/ubuntu jammy-security/multiverse amd64 Packages [80.3 kB]

73% [6 Packages store 0 B] [8 Packages 4297 kB/5665 kB 76%] [9 Packages 28.7 kB
                                                                               
73% [6 Packages store 0 B] [8 Packages 4365 kB/5665 kB 77%]
                                                           
Get:10 http://security.ubuntu.com/ubuntu jammy-security/main amd64 Packages [3311 kB]

74% [6 Packages store 0 B] [8 Packages 4428 kB/5665 kB 78%] [10 Packages 13.7 k
83% [6 Packages store 0 B] [Waiting for headers] [10 Packages 1120 kB/3311 kB 3
                                                                               
Get:11 http://archive.ubuntu.com/ubuntu jammy-updates/universe amd64 Packages [1581 kB]

83% [6 Packages store 0 B] [11 Packages 61.4 kB/1581 kB 4%] [10 Packages 1120 k
                                                                               
92% [6 Packages store 0 B] [10 Packages 2097 kB/3311 kB 63%]
                                                            
97% [6 Packages store 0 B]
                          
97% [Working]
97% [7 Packages store 0 B]
                          
98% [Working]
98% [9 Packages store 0 B]
                          
98% [Working]
98% [8 Packages store 0 B]
                          
99% [Working]
99% [11 Packages store 0 B]
                           
99% [Working]
99% [10 Packages store 0 B]
                           
100% [Working]
              
Fetched 21.4 MB in 1s (22.5 MB/s)

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 3%

Reading package lists... 3%

Reading package lists... 4%

Reading package lists... 4%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 52%

Reading package lists... 52%

Reading package lists... 67%

Reading package lists... 67%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 81%

Reading package lists... 81%

Reading package lists... 96%

Reading package lists... 96%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... Done


Building dependency tree... 0%

Building dependency tree... 0%

Building dependency tree... 0%

Building dependency tree... 50%

Building dependency tree... 50%

Building dependency tree... Done


Reading state information... 0% 

Reading state information... 1%

Reading state information... Done

All packages are up to date.
↓ 17 lines
ASSISTANT
Show reasoning

The user wants me to compile curl statically for arm64 with SSL support (TLS v1.3), brotli, zlib, and zstd. I need to:

1. Install cross-compilation tools for arm64
2. Install qemu for testing
3. Build static libraries for all dependencies (OpenSSL, brotli, zlib, zstd) for arm64
4. Configure and build curl statically for arm64
5. Install to /home/peter/result
6. Create a symlink from /home/peter/result/curl to the actual binary
7. Test with qemu-aarch64-static

Let me start by installing the necessary packages.

compile-bench> sudo apt install -y gcc-aarch64-linux-gnu g++-aarch64-linux-gnu qemu-user-static build-essential autoconf automake libtool cmake pkg-config
Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 3%

Reading package lists... 3%

Reading package lists... 4%

Reading package lists... 4%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 52%

Reading package lists... 52%

Reading package lists... 67%

Reading package lists... 67%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 81%

Reading package lists... 81%

Reading package lists... 96%

Reading package lists... 96%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... Done


Building dependency tree... 0%

Building dependency tree... 0%

Building dependency tree... 50%

Building dependency tree... 50%

Building dependency tree... 50%

Building dependency tree... Done


Reading state information... 0% 

Reading state information... 1%

Reading state information... Done

build-essential is already the newest version (12.9ubuntu3).
qemu-user-static is already the newest version (1:6.2+dfsg-2ubuntu6.27).
The following additional packages will be installed:
  autotools-dev binutils-aarch64-linux-gnu cmake-data cpp-11-aarch64-linux-gnu
  cpp-aarch64-linux-gnu dh-elpa-helper emacsen-common g++-11-aarch64-linux-gnu
  gcc-11-aarch64-linux-gnu gcc-11-aarch64-linux-gnu-base gcc-11-cross-base
  gcc-12-cross-base libarchive13 libasan6-arm64-cross libatomic1-arm64-cross
  libc6-arm64-cross libc6-dev-arm64-cross libexpat1 libgcc-11-dev-arm64-cross
  libgcc-s1-arm64-cross libglib2.0-0 libglib2.0-data libgomp1-arm64-cross
  libhwasan0-arm64-cross libicu70 libitm1-arm64-cross libjsoncpp25
  liblsan0-arm64-cross libltdl-dev libltdl7 librhash0 libsigsegv2
  libstdc++-11-dev-arm64-cross libstdc++6-arm64-cross libtsan0-arm64-cross
  libubsan1-arm64-cross libuv1 libxml2 linux-libc-dev-arm64-cross m4
  shared-mime-info xdg-user-dirs
Suggested packages:
  autoconf-archive gnu-standards autoconf-doc gettext binutils-doc cmake-doc
  ninja-build cmake-format gcc-11-locales cpp-doc gcc-11-doc manpages-dev flex
  bison gdb-aarch64-linux-gnu gcc-doc lrzip libtool-doc gfortran
  | fortran95-compiler gcj-jdk m4-doc
The following NEW packages will be installed:
  autoconf automake autotools-dev binutils-aarch64-linux-gnu cmake cmake-data
  cpp-11-aarch64-linux-gnu cpp-aarch64-linux-gnu dh-elpa-helper emacsen-common
  g++-11-aarch64-linux-gnu g++-aarch64-linux-gnu gcc-11-aarch64-linux-gnu
  gcc-11-aarch64-linux-gnu-base gcc-11-cross-base gcc-12-cross-base
  gcc-aarch64-linux-gnu libarchive13 libasan6-arm64-cross
  libatomic1-arm64-cross libc6-arm64-cross libc6-dev-arm64-cross libexpat1
[command output truncated]
ting up binutils-aarch64-linux-gnu (2.38-4ubuntu2.8) ...
Setting up autotools-dev (20220109.1) ...
Setting up libglib2.0-data (2.72.4-0ubuntu2.6) ...
Setting up libuv1:amd64 (1.43.0-1ubuntu0.1) ...
Setting up emacsen-common (3.0.4) ...
Setting up dh-elpa-helper (2.0.9ubuntu1) ...
Setting up libsigsegv2:amd64 (2.13-1ubuntu3) ...
Setting up libc6-arm64-cross (2.35-0ubuntu1cross3) ...
Setting up libjsoncpp25:amd64 (1.9.5-3) ...
Setting up pkg-config (0.29.2-1ubuntu3) ...
Setting up libitm1-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up libltdl7:amd64 (2.4.6-15build2) ...
Setting up linux-libc-dev-arm64-cross (5.15.0-22.22cross3) ...
Setting up cpp-11-aarch64-linux-gnu (11.4.0-1ubuntu1~22.04cross1) ...
Setting up gcc-11-cross-base (11.4.0-1ubuntu1~22.04cross1) ...
Setting up librhash0:amd64 (1.4.2-1ubuntu1) ...
Setting up cmake-data (3.22.1-1ubuntu1.22.04.2) ...
Setting up libicu70:amd64 (70.1-2) ...
Setting up libgcc-s1-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up libatomic1-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up liblsan0-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up libgomp1-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up libtool (2.4.6-15build2) ...
Setting up libasan6-arm64-cross (11.4.0-1ubuntu1~22.04cross1) ...
Setting up libtsan0-arm64-cross (11.4.0-1ubuntu1~22.04cross1) ...
Setting up m4 (1.4.18-5ubuntu2) ...
Setting up libhwasan0-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up libc6-dev-arm64-cross (2.35-0ubuntu1cross3) ...
Setting up libstdc++6-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up cpp-aarch64-linux-gnu (4:11.2.0-1ubuntu1) ...
Setting up autoconf (2.71-2) ...
Setting up libxml2:amd64 (2.9.13+dfsg-1ubuntu0.9) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/automake.1.gz because associated file /usr/share/man/man1/automake-1.16.1.gz (of link group automake) doesn't exist
update-alternatives: warning: skip creation of /usr/share/man/man1/aclocal.1.gz because associated file /usr/share/man/man1/aclocal-1.16.1.gz (of link group automake) doesn't exist
Setting up libubsan1-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up libarchive13:amd64 (3.6.0-1ubuntu1.5) ...
Setting up libgcc-11-dev-arm64-cross (11.4.0-1ubuntu1~22.04cross1) ...
Setting up libltdl-dev:amd64 (2.4.6-15build2) ...
Setting up shared-mime-info (2.1-2) ...
Setting up cmake (3.22.1-1ubuntu1.22.04.2) ...
Setting up gcc-11-aarch64-linux-gnu (11.4.0-1ubuntu1~22.04cross1) ...
Setting up libstdc++-11-dev-arm64-cross (11.4.0-1ubuntu1~22.04cross1) ...
Setting up g++-11-aarch64-linux-gnu (11.4.0-1ubuntu1~22.04cross1) ...
Setting up gcc-aarch64-linux-gnu (4:11.2.0-1ubuntu1) ...
Setting up g++-aarch64-linux-gnu (4:11.2.0-1ubuntu1) ...
Processing triggers for libc-bin (2.35-0ubuntu3.10) ...
↓ 79 lines
ASSISTANT
Show reasoning

The user wants me to compile curl for arm64 with specific requirements:
1. Compile curl v8.16.0 from the source code at /home/peter/curl.tar.gz
2. Install it to /home/peter/result
3. Create a symlink from /home/peter/result/curl to the actual binary
4. Build with SSL support (TLS v1.3), brotli, zlib and zstd
5. The binary should be statically compiled for arm64
6. Do a trial run via qemu-aarch64-static with the command curl https://google.com

I've already extracted the source code and installed the cross-compilation tools. Now I need to:

1. Create the result directory
2. Download and compile the dependencies (OpenSSL, zlib, brotli, zstd) for arm64 as static libraries
3. Configure and compile curl with these static dependencies for arm64
4. Install curl to the result directory
5. Create the symlink
6. Test with qemu-aarch64-static

Let me start by creating the result directory and setting up environment variables for cross-compilation.

Now I'll create the result directory and set up the environment for cross-compilation. I need to build static versions of all the dependencies first.

compile-bench> mkdir -p /home/peter/result /home/peter/build-deps
[empty output]
ASSISTANT
Show reasoning

The user wants me to compile curl statically for arm64 with SSL support (TLS v1.3), brotli, zlib, and zstd. I need to:

1. Set up cross-compilation environment for arm64
2. Build static versions of all dependencies (OpenSSL, zlib, brotli, zstd)
3. Build curl statically linking all these dependencies
4. Install to /home/peter/result
5. Create a symlink from /home/peter/result/curl to the actual binary
6. Test with qemu-aarch64-static that curl https://google.com works

Let me start by setting up environment variables for cross-compilation and then build the dependencies one by one.

compile-bench> export CC=aarch64-linux-gnu-gcc && export CXX=aarch64-linux-gnu-g++ && export AR=aarch64-linux-gnu-ar && export STRIP=aarch64-linux-gnu-strip && export HOST=aarch64-linux-gnu && export PREFIX=/home/peter/build-deps && echo "Cross-compilation environment set up"
Cross-compilation environment set up
ASSISTANT
Show reasoning

I need to build static libraries for all the dependencies (SSL/TLS, brotli, zlib, zstd) for arm64. Let me start by downloading and building them one by one.

First, I'll set up the environment variables properly and then build each dependency:
1. OpenSSL (for TLS v1.3 support)
2. zlib
3. brotli
4. zstd

Then I'll build curl with static linking to all these libraries.

Now I'll download and build the static dependencies. Let me start with OpenSSL for TLS v1.3 support:

compile-bench> cd /home/peter && wget https://www.openssl.org/source/openssl-3.1.4.tar.gz
--2025-09-16 22:03:10--  https://www.openssl.org/source/openssl-3.1.4.tar.gz
Resolving www.openssl.org (www.openssl.org)... 34.49.79.89, 2600:1901:0:d50b::
Connecting to www.openssl.org (www.openssl.org)|34.49.79.89|:443... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: https://github.com/openssl/openssl/releases/download/openssl-3.1.4/openssl-3.1.4.tar.gz [following]
--2025-09-16 22:03:11--  https://github.com/openssl/openssl/releases/download/openssl-3.1.4/openssl-3.1.4.tar.gz
Resolving github.com (github.com)... 140.82.112.3
Connecting to github.com (github.com)|140.82.112.3|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://release-assets.githubusercontent.com/github-production-release-asset/7634677/2ced6232-8721-4da4-aa48-fffc45209f42?sp=r&sv=2018-11-09&sr=b&spr=https&se=2025-09-16T23%3A01%3A53Z&rscd=attachment%3B+filename%3Dopenssl-3.1.4.tar.gz&rsct=application%2Foctet-stream&skoid=96c2d410-5711-43a1-aedd-ab1947aa7ab0&sktid=398a6654-997b-47e9-b12b-9515b896b4de&skt=2025-09-16T22%3A01%3A39Z&ske=2025-09-16T23%3A01%3A53Z&sks=b&skv=2018-11-09&sig=RiwMx9nRGpUqbGgBkZ9%2Bct9kGXBF5qCudEYTcEAOi7A%3D&jwt=eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJpc3MiOiJnaXRodWIuY29tIiwiYXVkIjoicmVsZWFzZS1hc3NldHMuZ2l0aHVidXNlcmNvbnRlbnQuY29tIiwia2V5Ijoia2V5MSIsImV4cCI6MTc1ODA2MDQ5MSwibmJmIjoxNzU4MDYwMTkxLCJwYXRoIjoicmVsZWFzZWFzc2V0cHJvZHVjdGlvbi5ibG9iLmNvcmUud2luZG93cy5uZXQifQ.8s4wKvdt8TX6XT5AysUlpUnDuEDMzR21yy9r0fkyLuk&response-content-disposition=attachment%3B%20filename%3Dopenssl-3.1.4.tar.gz&response-content-type=application%2Foctet-stream [following]
--2025-09-16 22:03:11--  https://release-assets.githubusercontent.com/github-production-release-asset/7634677/2ced6232-8721-4da4-aa48-fffc45209f42?sp=r&sv=2018-11-09&sr=b&spr=https&se=2025-09-16T23%3A01%3A53Z&rscd=attachment%3B+filename%3Dopenssl-3.1.4.tar.gz&rsct=application%2Foctet-stream&skoid=96c2d410-5711-43a1-aedd-ab1947aa7ab0&sktid=398a6654-997b-47e9-b12b-9515b896b4de&skt=2025-09-16T22%3A01%3A39Z&ske=2025-09-16T23%3A01%3A53Z&sks=b&skv=2018-11-09&sig=RiwMx9nRGpUqbGgBkZ9%2Bct9kGXBF5qCudEYTcEAOi7A%3D&jwt=eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJpc3MiOiJnaXRodWIuY29tIiwiYXVkIjoicmVsZWFzZS1hc3NldHMuZ2l0aHVidXNlcmNvbnRlbnQuY29tIiwia2V5Ijoia2V5MSIsImV4cCI6MTc1ODA2MDQ5MSwibmJmIjoxNzU4MDYwMTkxLCJwYXRoIjoicmVsZWFzZWFzc2V0cHJvZHVjdGlvbi5ibG9iLmNvcmUud2luZG93cy5uZXQifQ.8s4wKvdt8TX6XT5AysUlpUnDuEDMzR21yy9r0fkyLuk&response-content-disposition=attachment%3B%20filename%3Dopenssl-3.1.4.tar.gz&response-content-type=application%2Foctet-stream
Resolving release-assets.githubusercontent.com (release-assets.githubusercontent.com)... 185.199.109.133, 185.199.108.133, 185.199.111.133, ...
Connecting to release-assets.githubusercontent.com (release-assets.githubusercontent.com)|185.199.109.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 15569450 (15M) [application/octet-stream]
Saving to: 'openssl-3.1.4.tar.gz'


openssl-3.1.4.tar.g   0%[                    ]       0  --.-KB/s               
openssl-3.1.4.tar.g 100%[===================>]  14.85M  --.-KB/s    in 0.07s   

2025-09-16 22:03:11 (204 MB/s) - 'openssl-3.1.4.tar.gz' saved [15569450/15569450]
↓ 21 lines
ASSISTANT
Show reasoning

The user is just saying "..." which seems to indicate they want me to continue with the task. I need to extract and build OpenSSL for arm64, then the other dependencies (brotli, zlib, zstd), and finally curl itself. Let me continue step by step.

compile-bench> cd /home/peter && tar -xzf openssl-3.1.4.tar.gz
[empty output]
ASSISTANT
Show reasoning

The user wants me to compile curl statically for arm64 with SSL support (TLS v1.3), brotli, zlib and zstd. I need to:

1. Build OpenSSL for arm64 with static linking
2. Build zlib for arm64 with static linking
3. Build brotli for arm64 with static linking
4. Build zstd for arm64 with static linking
5. Build curl with all these dependencies statically linked for arm64
6. Test it with qemu-aarch64-static

Let me continue with building OpenSSL first.

compile-bench> cd /home/peter/openssl-3.1.4 && ./Configure linux-aarch64 --prefix=/home/peter/build-deps --cross-compile-prefix=aarch64-linux-gnu- no-shared no-dso
Configuring OpenSSL version 3.1.4 for target linux-aarch64
Using os-specific seed configuration
Created configdata.pm
Running configdata.pm
Created Makefile.in
Created Makefile
Created include/openssl/configuration.h

**********************************************************************
***                                                                ***
***   OpenSSL has been successfully configured                     ***
***                                                                ***
***   If you encounter a problem while building, please open an    ***
***   issue on GitHub <https://github.com/openssl/openssl/issues>  ***
***   and include the output from the following command:           ***
***                                                                ***
***       perl configdata.pm --dump                                ***
***                                                                ***
***   (If you are new to OpenSSL, you might want to consult the    ***
***   'Troubleshooting' section in the INSTALL.md file first)      ***
***                                                                ***
**********************************************************************
↓ 23 lines
ASSISTANT
Show reasoning

Now I need to compile OpenSSL. This may take a while.

compile-bench> cd /home/peter/openssl-3.1.4 && make -j$(nproc)
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/crypto/bn_conf.h.in > include/crypto/bn_conf.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/crypto/dso_conf.h.in > include/crypto/dso_conf.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/asn1.h.in > include/openssl/asn1.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/asn1t.h.in > include/openssl/asn1t.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/bio.h.in > include/openssl/bio.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/cmp.h.in > include/openssl/cmp.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/cms.h.in > include/openssl/cms.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/conf.h.in > include/openssl/conf.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/crmf.h.in > include/openssl/crmf.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/crypto.h.in > include/openssl/crypto.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/ct.h.in > include/openssl/ct.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/err.h.in > include/openssl/err.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/ess.h.in > include/openssl/ess.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/fipskey.h.in > include/openssl/fipskey.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/lhash.h.in > include/openssl/lhash.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/ocsp.h.in > include/openssl/ocsp.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/opensslv.h.in > include/openssl/opensslv.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/pkcs12.h.in > include/openssl/pkcs12.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/pkcs7.h.in > include/openssl/pkcs7.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/safestack.h.in > include/openssl/safestack.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/srp.h.in > include/openssl/srp.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/ssl.h.in > include/openssl/ssl.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/ui.h.in > include/openssl/ui.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/x509.h.in > include/openssl/x509.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/x509_vfy.h.in > include/openssl/x509_vfy.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/x509v3.h.in 
[command output truncated]
ttest \
	test/wpackettest-bin-wpackettest.o \
	libssl.a test/libtestutil.a libcrypto.a -ldl -pthread 
rm -f test/x509_check_cert_pkey_test
${LDCMD:-aarch64-linux-gnu-gcc} -pthread -Wa,--noexecstack -Wall -O3 -L.   \
	-o test/x509_check_cert_pkey_test \
	test/x509_check_cert_pkey_test-bin-x509_check_cert_pkey_test.o \
	test/libtestutil.a -lcrypto -ldl -pthread 
rm -f test/x509_dup_cert_test
${LDCMD:-aarch64-linux-gnu-gcc} -pthread -Wa,--noexecstack -Wall -O3 -L.   \
	-o test/x509_dup_cert_test \
	test/x509_dup_cert_test-bin-x509_dup_cert_test.o \
	test/libtestutil.a -lcrypto -ldl -pthread 
rm -f test/x509_internal_test
${LDCMD:-aarch64-linux-gnu-gcc} -pthread -Wa,--noexecstack -Wall -O3   \
	-o test/x509_internal_test \
	test/x509_internal_test-bin-x509_internal_test.o \
	test/libtestutil.a libcrypto.a -ldl -pthread 
rm -f test/x509_time_test
${LDCMD:-aarch64-linux-gnu-gcc} -pthread -Wa,--noexecstack -Wall -O3 -L.   \
	-o test/x509_time_test \
	test/x509_time_test-bin-x509_time_test.o \
	test/libtestutil.a -lcrypto -ldl -pthread 
rm -f test/x509aux
${LDCMD:-aarch64-linux-gnu-gcc} -pthread -Wa,--noexecstack -Wall -O3 -L.   \
	-o test/x509aux \
	test/x509aux-bin-x509aux.o \
	test/libtestutil.a -lcrypto -ldl -pthread 
rm -f apps/openssl
${LDCMD:-aarch64-linux-gnu-gcc} -pthread -Wa,--noexecstack -Wall -O3 -L.   \
	-o apps/openssl \
	apps/lib/openssl-bin-cmp_mock_srv.o \
	apps/openssl-bin-asn1parse.o apps/openssl-bin-ca.o \
	apps/openssl-bin-ciphers.o apps/openssl-bin-cmp.o \
	apps/openssl-bin-cms.o apps/openssl-bin-crl.o \
	apps/openssl-bin-crl2pkcs7.o apps/openssl-bin-dgst.o \
	apps/openssl-bin-dhparam.o apps/openssl-bin-dsa.o \
	apps/openssl-bin-dsaparam.o apps/openssl-bin-ec.o \
	apps/openssl-bin-ecparam.o apps/openssl-bin-enc.o \
	apps/openssl-bin-engine.o apps/openssl-bin-errstr.o \
	apps/openssl-bin-fipsinstall.o apps/openssl-bin-gendsa.o \
	apps/openssl-bin-genpkey.o apps/openssl-bin-genrsa.o \
	apps/openssl-bin-info.o apps/openssl-bin-kdf.o \
	apps/openssl-bin-list.o apps/openssl-bin-mac.o \
	apps/openssl-bin-nseq.o apps/openssl-bin-ocsp.o \
	apps/openssl-bin-openssl.o apps/openssl-bin-passwd.o \
	apps/openssl-bin-pkcs12.o apps/openssl-bin-pkcs7.o \
	apps/openssl-bin-pkcs8.o apps/openssl-bin-pkey.o \
	apps/openssl-bin-pkeyparam.o apps/openssl-bin-pkeyutl.o \
	apps/openssl-bin-prime.o apps/openssl-bin-progs.o \
	apps/openssl-bin-rand.o apps/openssl-bin-rehash.o \
	apps/openssl-bin-req.o apps/openssl-bin-rsa.o \
	apps/openssl-bin-rsautl.o apps/openssl-bin-s_client.o \
	apps/openssl-bin-s_server.o apps/openssl-bin-s_time.o \
	apps/openssl-bin-sess_id.o apps/openssl-bin-smime.o \
	apps/openssl-bin-speed.o apps/openssl-bin-spkac.o \
	apps/openssl-bin-srp.o apps/openssl-bin-storeutl.o \
	apps/openssl-bin-ts.o apps/openssl-bin-verify.o \
	apps/openssl-bin-version.o apps/openssl-bin-x509.o \
	apps/libapps.a -lssl -lcrypto -ldl -pthread 
make[1]: Leaving directory '/home/peter/openssl-3.1.4'
↓ 89 lines
ASSISTANT
Show reasoning

The user is waiting for the OpenSSL build to complete. It looks like it's finished building. Now I need to install it to the build-deps directory and then move on to building the other dependencies like zlib, brotli, and zstd.

compile-bench> cd /home/peter/openssl-3.1.4 && make install_sw
make depend && make _build_libs
make[1]: Entering directory '/home/peter/openssl-3.1.4'
make[1]: Leaving directory '/home/peter/openssl-3.1.4'
make[1]: Entering directory '/home/peter/openssl-3.1.4'
make[1]: Leaving directory '/home/peter/openssl-3.1.4'
created directory `/home/peter/build-deps/lib'
*** Installing runtime libraries
*** Installing development files
created directory `/home/peter/build-deps/include'
created directory `/home/peter/build-deps/include/openssl'
install ./include/openssl/aes.h -> /home/peter/build-deps/include/openssl/aes.h
install ./include/openssl/asn1.h -> /home/peter/build-deps/include/openssl/asn1.h
install ./include/openssl/asn1_mac.h -> /home/peter/build-deps/include/openssl/asn1_mac.h
install ./include/openssl/asn1err.h -> /home/peter/build-deps/include/openssl/asn1err.h
install ./include/openssl/asn1t.h -> /home/peter/build-deps/include/openssl/asn1t.h
install ./include/openssl/async.h -> /home/peter/build-deps/include/openssl/async.h
install ./include/openssl/asyncerr.h -> /home/peter/build-deps/include/openssl/asyncerr.h
install ./include/openssl/bio.h -> /home/peter/build-deps/include/openssl/bio.h
install ./include/openssl/bioerr.h -> /home/peter/build-deps/include/openssl/bioerr.h
install ./include/openssl/blowfish.h -> /home/peter/build-deps/include/openssl/blowfish.h
install ./include/openssl/bn.h -> /home/peter/build-deps/include/openssl/bn.h
install ./include/openssl/bnerr.h -> /home/peter/build-deps/include/openssl/bnerr.h
install ./include/openssl/buffer.h -> /home/peter/build-deps/include/openssl/buffer.h
install ./include/openssl/buffererr.h -> /home/peter/build-deps/include/openssl/buffererr.h
install ./include/openssl/camellia.h -> /home/peter/build-deps/include/openssl/camellia.h
install ./include/openssl/cast.h -> /home/peter/build-deps/include/openssl/cast.h
install ./include/openssl/cmac.h -> /home/peter/build-deps/include/openssl/cmac.h
install ./include/openssl/cmp.h -> /home/peter/build-deps/include/openssl/cmp.h
install ./include/openssl/cmp_util.h -> /home/peter/build-deps/include/openssl/cmp_util.h
install ./include/openssl/cmperr.h -> /home/peter/build-deps/include/openssl/cmperr.h
install ./include/openssl/cms.h -> /home/peter/build-deps/include/openssl/cms.h
install ./include/openssl/cmserr.h -> /home/peter/build-deps/include/openssl/cmserr.h
install ./include/openssl/comp.h -> /home/peter/build-deps/include/openssl/comp.h
install ./include/openssl/comperr.h -> /home/peter/build-deps/include/openssl/comperr.h
install ./include/openssl/conf.h -> /home/peter/build-deps/include/openssl/conf.h
install ./include/openssl/conf_api.h -> /home/peter/build-deps/include/openssl/conf_api.h
install ./include/openssl/conferr.h -> /home/peter/build-deps/include/openssl/conferr.h
install ./include/openssl/configuration.h -> /home/peter/build-deps/include/openssl/configuration.h
install ./include/openssl/conftypes.h -> /home/peter/build-deps/include/openssl/conft
[command output truncated]
ome/peter/build-deps/include/openssl/sslerr_legacy.h
install ./include/openssl/stack.h -> /home/peter/build-deps/include/openssl/stack.h
install ./include/openssl/store.h -> /home/peter/build-deps/include/openssl/store.h
install ./include/openssl/storeerr.h -> /home/peter/build-deps/include/openssl/storeerr.h
install ./include/openssl/symhacks.h -> /home/peter/build-deps/include/openssl/symhacks.h
install ./include/openssl/tls1.h -> /home/peter/build-deps/include/openssl/tls1.h
install ./include/openssl/trace.h -> /home/peter/build-deps/include/openssl/trace.h
install ./include/openssl/ts.h -> /home/peter/build-deps/include/openssl/ts.h
install ./include/openssl/tserr.h -> /home/peter/build-deps/include/openssl/tserr.h
install ./include/openssl/txt_db.h -> /home/peter/build-deps/include/openssl/txt_db.h
install ./include/openssl/types.h -> /home/peter/build-deps/include/openssl/types.h
install ./include/openssl/ui.h -> /home/peter/build-deps/include/openssl/ui.h
install ./include/openssl/uierr.h -> /home/peter/build-deps/include/openssl/uierr.h
install ./include/openssl/whrlpool.h -> /home/peter/build-deps/include/openssl/whrlpool.h
install ./include/openssl/x509.h -> /home/peter/build-deps/include/openssl/x509.h
install ./include/openssl/x509_vfy.h -> /home/peter/build-deps/include/openssl/x509_vfy.h
install ./include/openssl/x509err.h -> /home/peter/build-deps/include/openssl/x509err.h
install ./include/openssl/x509v3.h -> /home/peter/build-deps/include/openssl/x509v3.h
install ./include/openssl/x509v3err.h -> /home/peter/build-deps/include/openssl/x509v3err.h
install libcrypto.a -> /home/peter/build-deps/lib/libcrypto.a
install libssl.a -> /home/peter/build-deps/lib/libssl.a
created directory `/home/peter/build-deps/lib/pkgconfig'
install libcrypto.pc -> /home/peter/build-deps/lib/pkgconfig/libcrypto.pc
install libssl.pc -> /home/peter/build-deps/lib/pkgconfig/libssl.pc
install openssl.pc -> /home/peter/build-deps/lib/pkgconfig/openssl.pc
make depend && make _build_modules
make[1]: Entering directory '/home/peter/openssl-3.1.4'
make[1]: Leaving directory '/home/peter/openssl-3.1.4'
make[1]: Entering directory '/home/peter/openssl-3.1.4'
make[1]: Nothing to be done for '_build_modules'.
make[1]: Leaving directory '/home/peter/openssl-3.1.4'
created directory `/home/peter/build-deps/lib/engines-3'
*** Installing engines
created directory `/home/peter/build-deps/lib/ossl-modules'
*** Installing modules
make depend && make _build_programs
make[1]: Entering directory '/home/peter/openssl-3.1.4'
make[1]: Leaving directory '/home/peter/openssl-3.1.4'
make[1]: Entering directory '/home/peter/openssl-3.1.4'
make[1]: Nothing to be done for '_build_programs'.
make[1]: Leaving directory '/home/peter/openssl-3.1.4'
created directory `/home/peter/build-deps/bin'
*** Installing runtime programs
install apps/openssl -> /home/peter/build-deps/bin/openssl
install tools/c_rehash -> /home/peter/build-deps/bin/c_rehash
↓ 86 lines
ASSISTANT
Show reasoning

Now I need to build the other dependencies: zlib, brotli, and zstd as static libraries for arm64. Let me proceed with each one.

Now I'll download and build zlib:

compile-bench> cd /home/peter && wget https://github.com/madler/zlib/releases/download/v1.3.1/zlib-1.3.1.tar.gz
--2025-09-16 22:04:09--  https://github.com/madler/zlib/releases/download/v1.3.1/zlib-1.3.1.tar.gz
Resolving github.com (github.com)... 140.82.113.4
Connecting to github.com (github.com)|140.82.113.4|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://release-assets.githubusercontent.com/github-production-release-asset/2359378/eb5e982f-74dc-4279-8d04-e2f5d43ae3b5?sp=r&sv=2018-11-09&sr=b&spr=https&se=2025-09-16T23%3A02%3A42Z&rscd=attachment%3B+filename%3Dzlib-1.3.1.tar.gz&rsct=application%2Foctet-stream&skoid=96c2d410-5711-43a1-aedd-ab1947aa7ab0&sktid=398a6654-997b-47e9-b12b-9515b896b4de&skt=2025-09-16T22%3A02%3A08Z&ske=2025-09-16T23%3A02%3A42Z&sks=b&skv=2018-11-09&sig=voI8XseYLOLwllJ7%2BPLPtxOwvlVh6wJ740gIhJ9qrlQ%3D&jwt=eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJpc3MiOiJnaXRodWIuY29tIiwiYXVkIjoicmVsZWFzZS1hc3NldHMuZ2l0aHVidXNlcmNvbnRlbnQuY29tIiwia2V5Ijoia2V5MSIsImV4cCI6MTc1ODA2MDU0OSwibmJmIjoxNzU4MDYwMjQ5LCJwYXRoIjoicmVsZWFzZWFzc2V0cHJvZHVjdGlvbi5ibG9iLmNvcmUud2luZG93cy5uZXQifQ.Ha_RhwY-6xtT4Fw65sX5khs5wAtfN3j2tPxbiSbwTbc&response-content-disposition=attachment%3B%20filename%3Dzlib-1.3.1.tar.gz&response-content-type=application%2Foctet-stream [following]
--2025-09-16 22:04:09--  https://release-assets.githubusercontent.com/github-production-release-asset/2359378/eb5e982f-74dc-4279-8d04-e2f5d43ae3b5?sp=r&sv=2018-11-09&sr=b&spr=https&se=2025-09-16T23%3A02%3A42Z&rscd=attachment%3B+filename%3Dzlib-1.3.1.tar.gz&rsct=application%2Foctet-stream&skoid=96c2d410-5711-43a1-aedd-ab1947aa7ab0&sktid=398a6654-997b-47e9-b12b-9515b896b4de&skt=2025-09-16T22%3A02%3A08Z&ske=2025-09-16T23%3A02%3A42Z&sks=b&skv=2018-11-09&sig=voI8XseYLOLwllJ7%2BPLPtxOwvlVh6wJ740gIhJ9qrlQ%3D&jwt=eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJpc3MiOiJnaXRodWIuY29tIiwiYXVkIjoicmVsZWFzZS1hc3NldHMuZ2l0aHVidXNlcmNvbnRlbnQuY29tIiwia2V5Ijoia2V5MSIsImV4cCI6MTc1ODA2MDU0OSwibmJmIjoxNzU4MDYwMjQ5LCJwYXRoIjoicmVsZWFzZWFzc2V0cHJvZHVjdGlvbi5ibG9iLmNvcmUud2luZG93cy5uZXQifQ.Ha_RhwY-6xtT4Fw65sX5khs5wAtfN3j2tPxbiSbwTbc&response-content-disposition=attachment%3B%20filename%3Dzlib-1.3.1.tar.gz&response-content-type=application%2Foctet-stream
Resolving release-assets.githubusercontent.com (release-assets.githubusercontent.com)... 185.199.110.133, 185.199.109.133, 185.199.108.133, ...
Connecting to release-assets.githubusercontent.com (release-assets.githubusercontent.com)|185.199.110.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1512791 (1.4M) [application/octet-stream]
Saving to: 'zlib-1.3.1.tar.gz'


zlib-1.3.1.tar.gz     0%[                    ]       0  --.-KB/s               
zlib-1.3.1.tar.gz   100%[===================>]   1.44M  --.-KB/s    in 0.01s   

2025-09-16 22:04:09 (148 MB/s) - 'zlib-1.3.1.tar.gz' saved [1512791/1512791]
↓ 16 lines
ASSISTANT
Show reasoning

The user wants me to continue building the dependencies for curl. I've built OpenSSL successfully. Now I need to build zlib, then brotli, then zstd, and finally curl itself. Let me continue with zlib.

compile-bench> cd /home/peter && tar -xzf zlib-1.3.1.tar.gz
[empty output]
ASSISTANT
Show reasoning

The user wants me to build curl statically for arm64 with SSL support (TLS v1.3), brotli, zlib and zstd. I need to continue building the dependencies. I've already built OpenSSL and now I need to build zlib, then brotli and zstd, and finally curl itself.

Let me continue with building zlib.

compile-bench> cd /home/peter/zlib-1.3.1 && CC=aarch64-linux-gnu-gcc AR=aarch64-linux-gnu-ar RANLIB=aarch64-linux-gnu-ranlib ./configure --prefix=/home/peter/build-deps --static
Building static library libz.a version 1.3.1 with aarch64-linux-gnu-gcc.
Checking for size_t... Yes.
Checking for off64_t... Yes.
Checking for fseeko... Yes.
Checking for strerror... Yes.
Checking for unistd.h... Yes.
Checking for stdarg.h... Yes.
Checking whether to use vs[n]printf() or s[n]printf()... using vs[n]printf().
Checking for vsnprintf() in stdio.h... Yes.
Checking for return value of vsnprintf()... Yes.
Checking for attribute(visibility) support... Yes.
↓ 12 lines
ASSISTANT
Show reasoning

The zlib configure script seems to have completed successfully. Now I need to build and install it.

compile-bench> cd /home/peter/zlib-1.3.1 && make -j$(nproc) && make install
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -I. -c -o example.o test/example.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o adler32.o adler32.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o crc32.o crc32.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o deflate.o deflate.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o infback.o infback.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o inffast.o inffast.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o inflate.o inflate.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o inftrees.o inftrees.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o trees.o trees.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o zutil.o zutil.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o compress.o compress.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o uncompr.o uncompr.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o gzclose.o gzclose.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o gzlib.o gzlib.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o gzread.o gzread.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o gzwrite.o gzwrite.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -I. -c -o minigzip.o test/minigzip.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -I. -D_FILE_OFFSET_BITS=64 -c -o example64.o test/example.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -I. -D_FILE_OFFSET_BITS=64 -c -o minigzip64.o test/minigzip.c
aarch64-linux-gnu-ar rc libz.a adler32.o crc32.o deflate.o infback.o inffast.o inflate.o inftrees.o trees.o zutil.o compress.o uncompr.o gzclose.o gzlib.o gzread.o gzwrite.o 
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -o example example.o -L. libz.a
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -o minigzip minigzip.o -L. libz.a
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -o example64 example64.o -L. libz.a
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -o minigzip64 minigzip64.o -L. libz.a
rm -f /home/peter/build-deps/lib/libz.a
cp libz.a /home/peter/build-deps/lib
chmod 644 /home/peter/build-deps/lib/libz.a
rm -f /home/peter/build-deps/share/man/man3/zlib.3
cp zlib.3 /home/peter/build-deps/share/man/man3
chmod 644 /home/peter/build-deps/share/man/man3/zlib.3
rm -f /home/peter/build-deps/lib/pkgconfig/zlib.pc
cp zlib.pc /home/peter/build-deps/lib/pkgconfig
chmod 644 /home/peter/build-deps/lib/pkgconfig/zlib.pc
rm -f /home/peter/build-deps/include/zlib.h /home/peter/build-deps/include/zconf.h
cp zlib.h zconf.h /home/peter/build-deps/include
chmod 644 /home/peter/build-deps/include/zlib.h /home/peter/build-deps/include/zconf.h
↓ 37 lines
ASSISTANT
Show reasoning

Now I need to build brotli. Let me download and build it.

Now I'll download and build brotli:

compile-bench> cd /home/peter && wget https://github.com/google/brotli/archive/refs/tags/v1.1.0.tar.gz -O brotli-1.1.0.tar.gz
--2025-09-16 22:04:25--  https://github.com/google/brotli/archive/refs/tags/v1.1.0.tar.gz
Resolving github.com (github.com)... 140.82.113.4
Connecting to github.com (github.com)|140.82.113.4|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://codeload.github.com/google/brotli/tar.gz/refs/tags/v1.1.0 [following]
--2025-09-16 22:04:25--  https://codeload.github.com/google/brotli/tar.gz/refs/tags/v1.1.0
Resolving codeload.github.com (codeload.github.com)... 140.82.112.10
Connecting to codeload.github.com (codeload.github.com)|140.82.112.10|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 511969 (500K) [application/x-gzip]
Saving to: 'brotli-1.1.0.tar.gz'


brotli-1.1.0.tar.gz   0%[                    ]       0  --.-KB/s               
brotli-1.1.0.tar.gz 100%[===================>] 499.97K  --.-KB/s    in 0.05s   

2025-09-16 22:04:25 (9.57 MB/s) - 'brotli-1.1.0.tar.gz' saved [511969/511969]
↓ 16 lines
ASSISTANT
Show reasoning

I need to extract and build brotli, then build zstd. After that I can build curl statically with all the dependencies.

compile-bench> cd /home/peter && tar -xzf brotli-1.1.0.tar.gz
[empty output]
ASSISTANT
Show reasoning

The user is building curl statically for arm64 with specific dependencies. I need to continue building the dependencies. Let me build brotli using cmake.

compile-bench> cd /home/peter/brotli-1.1.0 && mkdir build && cd build && cmake -DCMAKE_C_COMPILER=aarch64-linux-gnu-gcc -DCMAKE_CXX_COMPILER=aarch64-linux-gnu-g++ -DCMAKE_INSTALL_PREFIX=/home/peter/build-deps -DBUILD_SHARED_LIBS=OFF ..
-- The C compiler identification is GNU 11.4.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/aarch64-linux-gnu-gcc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Setting build type to Release as none was specified.
-- Performing Test BROTLI_EMSCRIPTEN
-- Performing Test BROTLI_EMSCRIPTEN - Failed
-- Compiler is not EMSCRIPTEN
-- Looking for log2
-- Looking for log2 - not found
-- Looking for log2
-- Looking for log2 - found
-- Detected aarch64-linux-gnu cross-compilation
CMake Warning at CMakeLists.txt:264 (message):
  Test file tests/testdata/alice29.txt does not exist.


CMake Warning at CMakeLists.txt:264 (message):
  Test file tests/testdata/asyoulik.txt does not exist.


CMake Warning at CMakeLists.txt:264 (message):
  Test file tests/testdata/lcet10.txt does not exist.


CMake Warning at CMakeLists.txt:264 (message):
  Test file tests/testdata/plrabn12.txt does not exist.


-- Configuring done
-- Generating done
-- Build files have been written to: /home/peter/brotli-1.1.0/build
↓ 35 lines
ASSISTANT
Show reasoning

The user wants me to build curl statically for arm64 with SSL support (TLS v1.3), brotli, zlib and zstd. I've built OpenSSL and zlib so far, and now I'm building brotli. After brotli, I need to build zstd, and then finally curl itself.

Let me continue with building brotli.

compile-bench> cd /home/peter/brotli-1.1.0/build && make -j$(nproc) && make install
[  2%] Building C object CMakeFiles/brotlicommon.dir/c/common/context.c.o
[  5%] Building C object CMakeFiles/brotlicommon.dir/c/common/transform.c.o
[ 11%] Building C object CMakeFiles/brotlicommon.dir/c/common/constants.c.o
[ 11%] Building C object CMakeFiles/brotlicommon.dir/c/common/dictionary.c.o
[ 16%] Building C object CMakeFiles/brotlicommon.dir/c/common/platform.c.o
[ 16%] Building C object CMakeFiles/brotlicommon.dir/c/common/shared_dictionary.c.o
[ 19%] Linking C static library libbrotlicommon.a
[ 19%] Built target brotlicommon
[ 25%] Building C object CMakeFiles/brotlidec.dir/c/dec/huffman.c.o
[ 25%] Building C object CMakeFiles/brotlidec.dir/c/dec/decode.c.o
[ 27%] Building C object CMakeFiles/brotlidec.dir/c/dec/bit_reader.c.o
[ 33%] Building C object CMakeFiles/brotlidec.dir/c/dec/state.c.o
[ 33%] Building C object CMakeFiles/brotlienc.dir/c/enc/backward_references.c.o
[ 36%] Building C object CMakeFiles/brotlienc.dir/c/enc/backward_references_hq.c.o
[ 41%] Building C object CMakeFiles/brotlienc.dir/c/enc/block_splitter.c.o
[ 41%] Building C object CMakeFiles/brotlienc.dir/c/enc/bit_cost.c.o
[ 44%] Building C object CMakeFiles/brotlienc.dir/c/enc/brotli_bit_stream.c.o
[ 47%] Building C object CMakeFiles/brotlienc.dir/c/enc/cluster.c.o
[ 50%] Building C object CMakeFiles/brotlienc.dir/c/enc/command.c.o
[ 52%] Building C object CMakeFiles/brotlienc.dir/c/enc/compound_dictionary.c.o
[ 55%] Building C object CMakeFiles/brotlienc.dir/c/enc/compress_fragment.c.o
[ 58%] Building C object CMakeFiles/brotlienc.dir/c/enc/compress_fragment_two_pass.c.o
[ 61%] Building C object CMakeFiles/brotlienc.dir/c/enc/dictionary_hash.c.o
[ 63%] Building C object CMakeFiles/brotlienc.dir/c/enc/encode.c.o
[ 66%] Building C object CMakeFiles/brotlienc.dir/c/enc/encoder_dict.c.o
[ 69%] Building C object CMakeFiles/brotlienc.dir/c/enc/entropy_encode.c.o
[ 72%] Building C object CMakeFiles/brotlienc.dir/c/enc/fast_log.c.o
[ 75%] Building C object CMakeFiles/brotlienc.dir/c/enc/histogram.c.o
[ 77%] Building C object CMakeFiles/brotlienc.dir/c/enc/literal_cost.c.o
[ 80%] Building C object CMakeFiles/brotlienc.dir/c/enc/memory.c.o
[ 83%] Building C object CMakeFiles/brotlienc.dir/c/enc/metablock.c.o
[ 86%] Linking C static library libbrotlidec.a
[ 88%] Building C object CMakeFiles/brotlienc.dir/c/enc/static_dict.c.o
[ 88%] Built target brotlidec
[ 91%] Building C object CMakeFiles/brotlienc.dir/c/enc/utf8_util.c.o
[ 94%] Linking C static library libbrotlienc.a
[ 94%] Built target brotlienc
[ 97%] Building C object CMakeFiles/brotli.dir/c/tools/brotli.c.o
[100%] Linking C executable brotli
[100%] Built target brotli
Consolidate compiler generated dependencies of target brotlicommon
[ 19%] Built target brotlicommon
Consolidate compiler generated dependencies of target brotlidec
[ 33%] Built target brotlidec
Consolidate compiler generated dependencies of target brotlienc
[ 94%] Built target brotlienc
Consolidate compiler generated dependencies of target brotli
[100%] Built target brotli
Install the project...
-- Install configuration: "Release"
-- Installing: /home/peter/build-deps/bin/brotli
-- Installing: /home/peter/build-deps/lib/libbrotlienc.a
-- Installing: /home/peter/build-deps/lib/libbrotlidec.a
-- Installing: /home/peter/build-deps/lib/libbrotlicommon.a
-- Installing: /home/peter/build-deps/include/brotli
-- Installing: /home/peter/build-deps/include/brotli/types.h
-- Installing: /home/peter/build-deps/include/brotli/shared_dictionary.h
-- Installing: /home/peter/build-deps/include/brotli/decode.h
-- Installing: /home/peter/build-deps/include/brotli/port.h
-- Installing: /home/peter/build-deps/include/brotli/encode.h
-- Installing: /home/peter/build-deps/lib/pkgconfig/libbrotlicommon.pc
-- Installing: /home/peter/build-deps/lib/pkgconfig/libbrotlidec.pc
-- Installing: /home/peter/build-deps/lib/pkgconfig/libbrotlienc.pc
↓ 64 lines
ASSISTANT
Show reasoning

Now I need to download and build zstd. After that, I'll configure and build curl with all the dependencies statically linked for arm64.

Now I'll download and build zstd:

compile-bench> cd /home/peter && wget https://github.com/facebook/zstd/releases/download/v1.5.5/zstd-1.5.5.tar.gz
--2025-09-16 22:04:47--  https://github.com/facebook/zstd/releases/download/v1.5.5/zstd-1.5.5.tar.gz
Resolving github.com (github.com)... 140.82.113.4
Connecting to github.com (github.com)|140.82.113.4|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://release-assets.githubusercontent.com/github-production-release-asset/29759715/c042a5d4-24be-4250-916b-747c2be5d37e?sp=r&sv=2018-11-09&sr=b&spr=https&se=2025-09-16T23%3A03%3A47Z&rscd=attachment%3B+filename%3Dzstd-1.5.5.tar.gz&rsct=application%2Foctet-stream&skoid=96c2d410-5711-43a1-aedd-ab1947aa7ab0&sktid=398a6654-997b-47e9-b12b-9515b896b4de&skt=2025-09-16T22%3A02%3A48Z&ske=2025-09-16T23%3A03%3A47Z&sks=b&skv=2018-11-09&sig=bcQvK9S%2FNs0HW7Jnf7dJIS9J4GcmRdDiUIWy1p%2BzyEM%3D&jwt=eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJpc3MiOiJnaXRodWIuY29tIiwiYXVkIjoicmVsZWFzZS1hc3NldHMuZ2l0aHVidXNlcmNvbnRlbnQuY29tIiwia2V5Ijoia2V5MSIsImV4cCI6MTc1ODA2MDU4NywibmJmIjoxNzU4MDYwMjg3LCJwYXRoIjoicmVsZWFzZWFzc2V0cHJvZHVjdGlvbi5ibG9iLmNvcmUud2luZG93cy5uZXQifQ.Zga0sZbFA1lHP7LIWAS3maZDs8s_yOA6ackKDAGLnTM&response-content-disposition=attachment%3B%20filename%3Dzstd-1.5.5.tar.gz&response-content-type=application%2Foctet-stream [following]
--2025-09-16 22:04:47--  https://release-assets.githubusercontent.com/github-production-release-asset/29759715/c042a5d4-24be-4250-916b-747c2be5d37e?sp=r&sv=2018-11-09&sr=b&spr=https&se=2025-09-16T23%3A03%3A47Z&rscd=attachment%3B+filename%3Dzstd-1.5.5.tar.gz&rsct=application%2Foctet-stream&skoid=96c2d410-5711-43a1-aedd-ab1947aa7ab0&sktid=398a6654-997b-47e9-b12b-9515b896b4de&skt=2025-09-16T22%3A02%3A48Z&ske=2025-09-16T23%3A03%3A47Z&sks=b&skv=2018-11-09&sig=bcQvK9S%2FNs0HW7Jnf7dJIS9J4GcmRdDiUIWy1p%2BzyEM%3D&jwt=eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJpc3MiOiJnaXRodWIuY29tIiwiYXVkIjoicmVsZWFzZS1hc3NldHMuZ2l0aHVidXNlcmNvbnRlbnQuY29tIiwia2V5Ijoia2V5MSIsImV4cCI6MTc1ODA2MDU4NywibmJmIjoxNzU4MDYwMjg3LCJwYXRoIjoicmVsZWFzZWFzc2V0cHJvZHVjdGlvbi5ibG9iLmNvcmUud2luZG93cy5uZXQifQ.Zga0sZbFA1lHP7LIWAS3maZDs8s_yOA6ackKDAGLnTM&response-content-disposition=attachment%3B%20filename%3Dzstd-1.5.5.tar.gz&response-content-type=application%2Foctet-stream
Resolving release-assets.githubusercontent.com (release-assets.githubusercontent.com)... 185.199.108.133, 185.199.109.133, 185.199.111.133, ...
Connecting to release-assets.githubusercontent.com (release-assets.githubusercontent.com)|185.199.108.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 2368543 (2.3M) [application/octet-stream]
Saving to: 'zstd-1.5.5.tar.gz'


zstd-1.5.5.tar.gz     0%[                    ]       0  --.-KB/s               
zstd-1.5.5.tar.gz   100%[===================>]   2.26M  --.-KB/s    in 0.01s   

2025-09-16 22:04:47 (185 MB/s) - 'zstd-1.5.5.tar.gz' saved [2368543/2368543]
↓ 16 lines
ASSISTANT
Show reasoning

Now I need to extract zstd, configure and build it statically for arm64, then proceed to build curl with all the dependencies.

compile-bench> cd /home/peter && tar -xzf zstd-1.5.5.tar.gz
[empty output]
ASSISTANT
Show reasoning

Now I need to build zstd statically for arm64. For zstd, I'll need to use the Makefile in the lib directory and set the proper cross-compilation flags.

compile-bench> cd /home/peter/zstd-1.5.5 && CC=aarch64-linux-gnu-gcc CXX=aarch64-linux-gnu-g++ AR=aarch64-linux-gnu-ar RANLIB=aarch64-linux-gnu-ranlib PREFIX=/home/peter/build-deps make -j$(nproc) lib-release && make install-pc install-static install-includes
make[1]: Entering directory '/home/peter/zstd-1.5.5/lib'
creating pkgconfig
CC obj/conf_4705842037714f025943aa17f8c806d7/dynamic/debug.o
CC obj/conf_4705842037714f025943aa17f8c806d7/dynamic/entropy_common.o
CC obj/conf_4705842037714f025943aa17f8c806d7/dynamic/error_private.o
CC obj/conf_4705842037714f025943aa17f8c806d7/dynamic/fse_decompress.o
CC obj/conf_4705842037714f025943aa17f8c806d7/dynamic/pool.o
CC obj/conf_4705842037714f025943aa17f8c806d7/dynamic/threading.o
CC obj/conf_4705842037714f025943aa17f8c806d7/dynamic/xxhash.o
CC obj/conf_5d5bcd875c668cfcd707f0eef5115066/static/debug.o
CC obj/conf_4705842037714f025943aa17f8c806d7/dynamic/zstd_common.o
CC obj/conf_5d5bcd875c668cfcd707f0eef5115066/static/entropy_common.o
CC obj/conf_5d5bcd875c668cfcd707f0eef5115066/static/error_private.o
CC obj/conf_5d5bcd875c668cfcd707f0eef5115066/static/fse_decompress.o
CC obj/conf_5d5bcd875c668cfcd707f0eef5115066/static/pool.o
CC obj/conf_4705842037714f025943aa17f8c806d7/dynamic/zstd_v05.o
CC obj/conf_5d5bcd875c668cfcd707f0eef5115066/static/threading.o
CC obj/conf_4705842037714f025943aa17f8c806d7/dynamic/zstd_v06.o
CC obj/conf_5d5bcd875c668cfcd707f0eef5115066/static/xxhash.o
CC obj/conf_5d5bcd875c668cfcd707f0eef5115066/static/zstd_common.o
CC obj/conf_4705842037714f025943aa17f8c806d7/dynamic/zstd_v07.o
CC obj/conf_5d5bcd875c668cfcd707f0eef5115066/static/zstd_v05.o
CC obj/conf_4705842037714f025943aa17f8c806d7/dynamic/fse_compress.o
CC obj/conf_4705842037714f025943aa17f8c806d7/dynamic/hist.o
CC obj/conf_4705842037714f025943aa17f8c806d7/dynamic/huf_compress.o
CC obj/conf_4705842037714f025943aa17f8c806d7/dynamic/zstd_compress.o
CC obj/conf_5d5bcd875c668cfcd707f0eef5115066/static/zstd_v06.o
CC obj/conf_5d5bcd875c668cfcd707f0eef5115066/static/zstd_v07.o
CC obj/conf_5d5bcd875c668cfcd707f0eef5115066/static/fse_compress.o
CC obj/conf_5d5bcd875c668cfcd707f0eef5115066/static/hist.o
CC obj/conf_4705842037714f025943aa17f8c806d7/dynamic/zstd_compress_literals.o
CC obj/conf_5d5bcd875c668cfcd707f0eef5115066/static/huf_compress.o
CC obj/conf_5d5bcd875c668cfcd707f0eef5115066/static/zstd_compress.o
CC obj/conf_5d5bcd875c668cfcd707f0eef5115066/static/zstd_compress_literals.o
CC obj/conf_4705842037714f025943aa17f8c806d7/dynamic/zstd_compress_sequences.o
CC obj/conf_5d5bcd875c668cfcd707f0eef5115066/static/zstd_compress_sequences.o
CC obj/conf_4705842037714f025943aa17f8c806d7/dynamic/zstd_compress_superblock.o
CC obj/conf_4705842037714f025943aa17f8c806d7/dynamic/zstd_double_fast.o
CC obj/conf_4705842037714f025943aa17f8c806d7/dynamic/zstd_fast.o
CC obj/conf_4705842037714f025943aa17f8c806d7/dynamic/zstd_lazy.o
CC obj/conf_4705842037714f025943aa17f8c806d7/dynamic/zstd_ldm.o
CC obj/conf_5d5bcd875c668cfcd707f0eef5115066/static/zstd_compress_superblock.o
CC obj/conf_5d5bcd875c668cfcd707f0eef5115066/static/zstd_double_fast.o
CC obj/conf_4705842037714f025943aa17f8c806d7/dynamic/zstd_opt.o
CC obj/conf_5d5bcd875c668cfcd707f0eef5115066/static/zstd_fast.o
CC obj/conf_5d5bcd875c668cfcd707f0eef5115066/static/zstd_lazy.o
CC obj/conf_5d5bcd875c668cfcd707f0eef5115066/static/zstd_ldm.o
CC obj/conf_5d5bcd875c668cfcd707f0eef5115066/static/zstd_opt.o
CC obj/conf_4705842037714f025943aa17f8c806d7/dynamic/zstdmt_compress.o
CC obj/conf_5d5bcd875c668cfcd707f0eef5115066/static/zstdmt_compress.o
CC obj/conf_4705842037714f025943aa17f8c806d7/dynamic/huf_decompress.o
CC obj/conf_4705842037714f025943aa17f8c806d7/dynamic/zstd_ddict.o
CC obj/conf_4705842037714f025943aa17f8c806d7/dynamic/zstd_decompress.o
CC obj/conf_5d5bcd875c668cfcd707f0eef5115066/static/huf_decompress.o
CC obj/conf_5d5bcd875c668cfcd707f0eef5115066/static/zstd_ddict.o
CC obj/conf_4705842037714f025943aa17f8c806d7/dynamic/zstd_decompress_block.o
AS obj/conf_4705842037714f025943aa17f8c806d7/dynamic/huf_decompress_amd64.o
CC obj/conf_5d5bcd875c668cfcd707f0eef5115066/static/zstd_decompress.o
CC obj/conf_5d5bcd875c668cfcd707f0eef5115066/static/zstd_decompress_block.o
CC obj/conf_4705842037714f025943aa17f8c806d7/dynamic/cover.o
AS obj/conf_5d5bcd875c668cfcd707f0eef5115066/static/huf_decompress_amd64.o
CC obj/conf_4705842037714f025943aa17f8c806d7/dynamic/divsufsort.o
CC obj/conf_4705842037714f025943aa17f8c806d7/dynamic/fastcover.o
CC obj/conf_5d5bcd875c668cfcd707f0eef5115066/static/cover.o
CC obj/conf_4705842037714f025943aa17f8c806d7/dynamic/zdict.o
CC obj/conf_5d5bcd875c668cfcd707f0eef5115066/static/divsufsort.o
CC obj/conf_5d5bcd875c668cfcd707f0eef5115066/static/fastcover.o
CC obj/conf_5d5bcd875c668cfcd707f0eef5115066/static/zdict.o
compiling multi-threaded dynamic library 1.5.5
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: warning: -z cet-report=error ignored
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: warning: -z cet-report=error ignored
creating versioned links
compiling single-threaded static library 1.5.5
release build completed
make[1]: Leaving directory '/home/peter/zstd-1.5.5/lib'
make: *** No rule to make target 'install-pc'.  Stop.
↓ 77 lines
ASSISTANT
Show reasoning

The error shows that there's no rule for 'install-pc' target in zstd's Makefile. Let me run the install command separately for zstd to install the static library and headers properly.

compile-bench> cd /home/peter/zstd-1.5.5 && CC=aarch64-linux-gnu-gcc CXX=aarch64-linux-gnu-g++ AR=aarch64-linux-gnu-ar RANLIB=aarch64-linux-gnu-ranlib PREFIX=/home/peter/build-deps make install-static install-includes
make: *** No rule to make target 'install-static'.  Stop.
ASSISTANT
Show reasoning

Let me check what targets are available for zstd and install it properly.

compile-bench> cd /home/peter/zstd-1.5.5 && CC=aarch64-linux-gnu-gcc CXX=aarch64-linux-gnu-g++ AR=aarch64-linux-gnu-ar RANLIB=aarch64-linux-gnu-ranlib PREFIX=/home/peter/build-deps make install
make[1]: Entering directory '/home/peter/zstd-1.5.5/lib'
Installing static library
Installing shared library
Installing includes
zstd static and shared library installed
make[1]: Leaving directory '/home/peter/zstd-1.5.5/lib'
make[1]: Entering directory '/home/peter/zstd-1.5.5/programs'
make[2]: Entering directory '/home/peter/zstd-1.5.5/programs'
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/debug.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/entropy_common.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/error_private.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/fse_decompress.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/pool.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/threading.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/xxhash.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/zstd_common.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/fse_compress.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/hist.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/huf_compress.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/zstd_compress.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/zstd_compress_literals.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/zstd_compress_sequences.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/zstd_compress_superblock.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/zstd_double_fast.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/zstd_fast.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/zstd_lazy.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/zstd_ldm.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/zstd_opt.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/zstdmt_compress.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/huf_decompress.o
AS obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/huf_decompress_amd64.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/zstd_ddict.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/zstd_decompress.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/zstd_decompress_block.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/cover.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/divsufsort.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/fastcover.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/zdict.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/zstd_v05.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/zstd_v06.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/zstd_v07.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/benchfn.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/benchzstd.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/datagen.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/dibio.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/fileio.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/fileio_asyncio.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/timefn.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/util.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/zstdcli.o
CC obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/zstdcli_trace.o
==> building with threading support
==> no zlib, building zstd without .gz support
==> no liblzma, building zstd without .xz/.lzma support
==> no liblz4, building zstd without .lz4 support
LINK obj/conf_abb13d66fdbfc77bbd92af6619c5efe5/zstd
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: warning: -z cet-report=error ignored
zstd build completed
make[2]: Leaving directory '/home/peter/zstd-1.5.5/programs'
Installing binaries
Installing man pages
zstd installation completed
make[1]: Leaving directory '/home/peter/zstd-1.5.5/programs'
↓ 64 lines
ASSISTANT
Show reasoning

Good, now I have all the dependencies built and installed in /home/peter/build-deps. Let me check what's there:

- OpenSSL 3.1.4 with TLS 1.3 support (built statically)
- zlib 1.3.1 (built statically)
- brotli 1.1.0 (built statically)
- zstd 1.5.5 (built statically)

Now I need to configure and build curl itself with all these dependencies, making sure it's statically linked for arm64.

Now let me check what's in the build-deps directory and then configure curl:

compile-bench> ls -la /home/peter/build-deps/lib/
total 13968
drwxr-xr-x 5 peter peter    4096 Sep 16 22:05 .
drwxr-xr-x 6 peter peter    4096 Sep 16 22:04 ..
drwxr-xr-x 2 peter peter    4096 Sep 16 22:04 engines-3
-rw-r--r-- 1 peter peter  139552 Sep 16 22:04 libbrotlicommon.a
-rw-r--r-- 1 peter peter   56048 Sep 16 22:04 libbrotlidec.a
-rw-r--r-- 1 peter peter  738278 Sep 16 22:04 libbrotlienc.a
-rw-r--r-- 1 peter peter 9971904 Sep 16 22:04 libcrypto.a
-rw-r--r-- 1 peter peter 1308484 Sep 16 22:04 libssl.a
-rw-r--r-- 1 peter peter  148980 Sep 16 22:04 libz.a
-rw-r--r-- 1 peter peter 1036716 Sep 16 22:05 libzstd.a
lrwxrwxrwx 1 peter peter      16 Sep 16 22:05 libzstd.so -> libzstd.so.1.5.5
lrwxrwxrwx 1 peter peter      16 Sep 16 22:05 libzstd.so.1 -> libzstd.so.1.5.5
-rwxr-xr-x 1 peter peter  862952 Sep 16 22:05 libzstd.so.1.5.5
drwxr-xr-x 2 peter peter    4096 Sep 16 22:04 ossl-modules
drwxr-xr-x 2 peter peter    4096 Sep 16 22:05 pkgconfig
↓ 17 lines
ASSISTANT
Show reasoning

Good! I can see all the static libraries are available:
- libcrypto.a and libssl.a for OpenSSL (TLS v1.3 support)
- libz.a for zlib
- libbrotlicommon.a, libbrotlidec.a, libbrotlienc.a for brotli
- libzstd.a for zstd

Now I need to configure and build curl statically with all these dependencies. I'll need to set up the appropriate environment variables and configure curl to use these static libraries.

Now I'll configure and build curl with all the static dependencies:

compile-bench> cd /home/peter/curl-8.16.0 && export CC=aarch64-linux-gnu-gcc && export CXX=aarch64-linux-gnu-g++ && export AR=aarch64-linux-gnu-ar && export STRIP=aarch64-linux-gnu-strip && export PKG_CONFIG_PATH=/home/peter/build-deps/lib/pkgconfig && export CPPFLAGS="-I/home/peter/build-deps/include" && export LDFLAGS="-L/home/peter/build-deps/lib -static" && autoreconf -fi
libtoolize: putting auxiliary files in '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
libtoolize: copying file 'm4/libtool.m4'
libtoolize: copying file 'm4/ltoptions.m4'
libtoolize: copying file 'm4/ltsugar.m4'
libtoolize: copying file 'm4/ltversion.m4'
libtoolize: copying file 'm4/lt~obsolete.m4'
libtoolize: Remember to add 'LT_INIT' to configure.ac.
configure.ac:128: installing './compile'
configure.ac:134: installing './missing'
docs/examples/Makefile.am: installing './depcomp'
↓ 13 lines
ASSISTANT
Show reasoning

Now I need to configure curl with the static dependencies. Let me configure it properly with the right flags for static compilation and all the required features.

compile-bench> cd /home/peter/curl-8.16.0 && ./configure --host=aarch64-linux-gnu --prefix=/home/peter/result --enable-static --disable-shared --with-openssl=/home/peter/build-deps --with-zlib=/home/peter/build-deps --with-brotli=/home/peter/build-deps --with-zstd=/home/peter/build-deps --disable-ldap --disable-ldaps --disable-rtsp --disable-dict --disable-telnet --disable-tftp --disable-pop3 --disable-imap --disable-smb --disable-smtp --disable-gopher --disable-manual --disable-libcurl-option --enable-ipv6 --enable-http --enable-ftp --enable-file --enable-proxy --enable-cookies
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for aarch64-linux-gnu-ar... /usr/bin/aarch64-linux-gnu-ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for aarch64-linux-gnu-gcc... aarch64-linux-gnu-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether aarch64-linux-gnu-gcc accepts -g... yes
checking for aarch64-linux-gnu-gcc option to enable C11 features... none needed
checking whether aarch64-linux-gnu-gcc understands -c and -o together... yes
checking how to run the C preprocessor... aarch64-linux-gnu-gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for aarch64-linux-gnu-strip... aarch64-linux-gnu-strip
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of aarch64-linux-gnu-gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... aar
[command output truncated]
hecking whether to build documentation... yes
checking whether to enable generation of C code... no
checking whether to use libgcc... no
checking if X/Open network library is required... no
checking for gethostbyname... yes
checking whether build target is a native Windows one... (cached) no
checking for proto/bsdsocket.h... no
checking for connect in libraries... yes
checking for sys/types.h... (cached) yes
checking for monotonic clock_gettime... yes
checking for clock_gettime in libraries... no additional lib required
checking for sys/types.h... (cached) yes
checking for raw monotonic clock_gettime... yes
checking for zlib.h... yes
checking for gzread in -lz... yes
configure: found both libz and libz.h header
checking for BrotliDecoderDecompress in -lbrotlidec... yes
checking for brotli/decode.h... yes
checking for ZSTD_createDStream in -lzstd... yes
checking for zstd.h... yes
checking whether to enable IPv6... yes
checking if struct sockaddr_in6 has sin6_scope_id member... yes
checking if argv can be written to... no
configure: WARNING: the previous check could not be made default was used
checking if GSS-API support is requested... no
checking whether to enable Windows native SSL/TLS... no
checking whether to enable Amiga native SSL/TLS (AmiSSL v5)... no
configure: PKG_CONFIG_LIBDIR will be set to "/home/peter/build-deps/lib/pkgconfig"
checking for aarch64-linux-gnu-pkg-config... no
checking for pkg-config... /usr/bin/pkg-config
configure: WARNING: using cross tools not prefixed with host triplet
checking for openssl options with pkg-config... found
configure: pkg-config: SSL_LIBS: "-lssl -lcrypto"
configure: pkg-config: SSL_LDFLAGS: "-L/home/peter/build-deps/lib"
configure: pkg-config: SSL_CPPFLAGS: "-I/home/peter/build-deps/include"
checking for HMAC_Update in -lcrypto... yes
checking for SSL_connect in -lssl... yes
checking for openssl/x509.h... yes
checking for openssl/rsa.h... yes
checking for openssl/crypto.h... yes
checking for openssl/pem.h... yes
checking for openssl/ssl.h... yes
checking for openssl/err.h... yes
checking for BoringSSL... no
checking for AWS-LC... no
checking for LibreSSL... no
checking for OpenSSL >= v3... yes
checking for SSL_set_quic_use_legacy_codepoint... no
checking for SSL_set_quic_tls_cbs... no
configure: OpenSSL version does not speak any known QUIC API
checking for SRP support in OpenSSL... yes
checking for QUIC support and OpenSSL >= 3.3... no
configure: built with one SSL backend
checking default CA cert bundle/path... configure: WARNING: skipped the ca-cert path detection when cross-compiling
no
checking whether to use OpenSSL's built-in CA store... no
checking CA cert bundle path to embed in the curl tool... no
checking for aarch64-linux-gnu-pkg-config... /usr/bin/pkg-config
checking for libpsl options with pkg-config... no
checking for psl_builtin in -lpsl... no
configure: error: libpsl libs and/or directories were not found where specified!
↓ 127 lines
ASSISTANT
Show reasoning

The configure failed because it couldn't find libpsl. Let me disable libpsl as it's not strictly required for basic SSL support and HTTP functionality. I'll reconfigure without it.

compile-bench> cd /home/peter/curl-8.16.0 && ./configure --host=aarch64-linux-gnu --prefix=/home/peter/result --enable-static --disable-shared --with-openssl=/home/peter/build-deps --with-zlib=/home/peter/build-deps --with-brotli=/home/peter/build-deps --with-zstd=/home/peter/build-deps --disable-ldap --disable-ldaps --disable-rtsp --disable-dict --disable-telnet --disable-tftp --disable-pop3 --disable-imap --disable-smb --disable-smtp --disable-gopher --disable-manual --disable-libcurl-option --enable-ipv6 --enable-http --enable-ftp --enable-file --enable-proxy --enable-cookies --without-libpsl
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for aarch64-linux-gnu-ar... /usr/bin/aarch64-linux-gnu-ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for aarch64-linux-gnu-gcc... aarch64-linux-gnu-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether aarch64-linux-gnu-gcc accepts -g... yes
checking for aarch64-linux-gnu-gcc option to enable C11 features... none needed
checking whether aarch64-linux-gnu-gcc understands -c and -o together... yes
checking how to run the C preprocessor... aarch64-linux-gnu-gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for aarch64-linux-gnu-strip... aarch64-linux-gnu-strip
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of aarch64-linux-gnu-gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... aar
[command output truncated]
sts/http/Makefile
config.status: creating packages/Makefile
config.status: creating packages/vms/Makefile
config.status: creating libcurl.pc
config.status: creating curl-config
config.status: creating lib/curl_config.h
config.status: executing depfiles commands
config.status: executing libtool commands
configure: Configured to build curl/libcurl:

  Host setup:       aarch64-unknown-linux-gnu
  Install prefix:   /home/peter/result
  Compiler:         aarch64-linux-gnu-gcc
   CFLAGS:          -Werror-implicit-function-declaration -O2 -Wno-system-headers
   CFLAGS extras:   
   CPPFLAGS:        -D_GNU_SOURCE -isystem /home/peter/build-deps/include -isystem /home/peter/build-deps/include -isystem /home/peter/build-deps/include -isystem /home/peter/build-deps/include
   LDFLAGS:         -L/home/peter/build-deps/lib -L/home/peter/build-deps/lib -L/home/peter/build-deps/lib -L/home/peter/build-deps/lib
     curl-config:   -L/home/peter/build-deps/lib -L/home/peter/build-deps/lib -L/home/peter/build-deps/lib
   LIBS:            -lssl -lcrypto -lssl -lcrypto -lzstd -lzstd -lbrotlidec -lbrotlidec -lbrotlicommon -lz

  curl version:     8.16.0
  SSL:              enabled (OpenSSL v3+)
  SSH:              no      (--with-{libssh,libssh2})
  zlib:             enabled
  brotli:           enabled (libbrotlidec)
  zstd:             enabled (libzstd)
  GSS-API:          no      (--with-gssapi)
  GSASL:            no      (libgsasl not found)
  TLS-SRP:          enabled
  resolver:         POSIX threaded
  IPv6:             enabled
  Unix sockets:     enabled
  IDN:              no      (--with-{libidn2,winidn})
  Build docs:       enabled (--disable-docs)
  Build libcurl:    Shared=no, Static=yes
  Built-in manual:  no      (--enable-manual)
  --libcurl option: no
  Verbose errors:   enabled (--disable-verbose)
  Code coverage:    disabled
  SSPI:             no      (--enable-sspi)
  ca cert bundle:   no
  ca cert path:     no
  ca cert embed:    no
  ca fallback:      no
  LDAP:             no      (--enable-ldap / --with-ldap-lib / --with-lber-lib)
  LDAPS:            no      (--enable-ldaps)
  IPFS/IPNS:        enabled
  RTSP:             no      (--enable-rtsp)
  RTMP:             no      (--with-librtmp)
  PSL:              no      (--with-libpsl)
  Alt-svc:          enabled (--disable-alt-svc)
  Headers API:      enabled (--disable-headers-api)
  HSTS:             enabled (--disable-hsts)
  HTTP1:            enabled (internal)
  HTTP2:            no      (--with-nghttp2)
  HTTP3:            no      (--with-ngtcp2 --with-nghttp3, --with-quiche, --with-openssl-quic)
  ECH:              no      (--enable-ech)
  HTTPS RR:         no      (--enable-httpsrr)
  SSLS-EXPORT:      no      (--enable-ssls-export)
  Protocols:        file ftp ftps http https ipfs ipns mqtt ws wss
  Features:         alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM SSL threadsafe TLS-SRP UnixSockets zstd
↓ 127 lines
ASSISTANT
Show reasoning

Great! The configure command succeeded. I can see from the output that:

1. SSL is enabled with OpenSSL v3+
2. zlib is enabled
3. brotli is enabled (libbrotlidec)
4. zstd is enabled (libzstd)
5. It's configured for static linking (Build libcurl: Shared=no, Static=yes)
6. TLS-SRP is enabled (which should support TLS v1.3)
7. It's cross-compiling for aarch64-linux-gnu

Now I need to build curl.

Great! The configuration succeeded and shows all the required features are enabled. Now let's build curl:

compile-bench> cd /home/peter/curl-8.16.0 && make -j$(nproc)
Making all in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make  all-am
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
  CC       libcurl_la-altsvc.lo
  CC       libcurl_la-amigaos.lo
  CC       libcurl_la-asyn-ares.lo
  CC       libcurl_la-asyn-base.lo
  CC       libcurl_la-asyn-thrdd.lo
  CC       libcurl_la-bufq.lo
  CC       libcurl_la-bufref.lo
  CC       libcurl_la-cf-h1-proxy.lo
  CC       libcurl_la-cf-h2-proxy.lo
  CC       libcurl_la-cf-haproxy.lo
  CC       libcurl_la-cf-https-connect.lo
  CC       libcurl_la-cf-ip-happy.lo
  CC       libcurl_la-cf-socket.lo
  CC       libcurl_la-cfilters.lo
  CC       libcurl_la-conncache.lo
  CC       libcurl_la-connect.lo
  CC       libcurl_la-content_encoding.lo
  CC       libcurl_la-cookie.lo
  CC       libcurl_la-cshutdn.lo
  CC       libcurl_la-curl_addrinfo.lo
  CC       libcurl_la-curl_des.lo
  CC       libcurl_la-curl_endian.lo
  CC       libcurl_la-curl_fnmatch.lo
  CC       libcurl_la-curl_get_line.lo
  CC       libcurl_la-curl_gethostname.lo
  CC       libcurl_la-curl_gssapi.lo
  CC       libcurl_la-curl_memrchr.lo
  CC       libcurl_la-curl_ntlm_core.lo
  CC       libcurl_la-curl_range.lo
  CC       libcurl_la-curl_rtmp.lo
  CC       libcurl_la-curl_sasl.lo
  CC       libcurl_la-curl_sha512_256.lo
  CC       libcurl_la-curl_sspi.lo
  CC       libcurl_la-curl_threads.lo
  CC       libcurl_la-curl_trc.lo
  CC       libcurl_la-cw-out.lo
  CC       libcurl_la-cw-pause.lo
  CC       libcurl_la-dict.lo
  CC       libcurl_la-doh.lo
  CC       libcurl_la-dynhds.lo
  CC       libcurl_la-easy.lo
  CC       libcurl_la-easygetopt.lo
  CC       libcurl_la-easyoptions.lo
  CC       libcurl_la-escape.lo
  CC       libcurl_la-fake_addrinfo.lo
  CC       libcurl_la-file.lo
  CC       libcurl_la-fileinfo.lo
  CC       libcurl_la-fopen.lo
  CC       libcurl_la-formdata.lo
  CC       libcurl_la-ftp.lo
  CC       libcurl_la-ftplistparser.lo
  CC       libcurl_la-getenv.lo
  CC       libcurl_la-getinfo.lo
  CC       libcurl_la-gopher.lo
  CC       libcurl_la-hash.lo
  CC       libcurl_la-headers.lo
  CC       libcurl_la-hmac.lo
  CC       libcurl_la-hostip.lo
  CC       libcurl_la-hostip4.lo
  CC       libcurl_la-hostip6.lo
  CC       libcurl_la-hsts.lo
  CC       libcurl_la-http.lo
  CC       libcurl_la-http1.lo
  CC       libcurl_la-http2.lo
  CC       libcurl_la-http_aws_sigv4.lo
  CC       libcurl_la-http_chunks.lo
[command output truncated]
  CC       curl-tool_ssls.o
  CC       curl-tool_stderr.o
  CC       curl-tool_strdup.o
  CC       curl-tool_urlglob.o
  CC       curl-tool_util.o
  CC       curl-tool_vms.o
  CC       curl-tool_writeout.o
  CC       curl-tool_writeout_json.o
  CC       curl-tool_xattr.o
  CC       curl-var.o
  CC       curl-tool_hugehelp.o
echo '/* !checksrc! disable COPYRIGHT all */' > tool_ca_embed.c
echo 'extern const void *curl_ca_embed; const void *curl_ca_embed;' >> tool_ca_embed.c
  CC       curlinfo.o
  CC       libcurltool_la-config2setopts.lo
  CC       libcurltool_la-slist_wc.lo
  CC       libcurltool_la-terminal.lo
  CC       libcurltool_la-tool_bname.lo
  CC       libcurltool_la-tool_cb_dbg.lo
  CC       libcurltool_la-tool_cb_hdr.lo
  CC       libcurltool_la-tool_cb_prg.lo
  CC       libcurltool_la-tool_cb_rea.lo
  CC       libcurltool_la-tool_cb_see.lo
  CC       libcurltool_la-tool_cb_soc.lo
  CC       libcurltool_la-tool_cb_wrt.lo
  CC       libcurltool_la-tool_cfgable.lo
  CC       libcurltool_la-tool_dirhie.lo
  CC       libcurltool_la-tool_doswin.lo
  CC       libcurltool_la-tool_easysrc.lo
  CC       libcurltool_la-tool_filetime.lo
  CC       libcurltool_la-tool_findfile.lo
  CC       libcurltool_la-tool_formparse.lo
  CC       libcurltool_la-tool_getparam.lo
  CC       libcurltool_la-tool_getpass.lo
  CC       libcurltool_la-tool_help.lo
  CC       libcurltool_la-tool_helpers.lo
  CC       libcurltool_la-tool_ipfs.lo
  CC       libcurltool_la-tool_libinfo.lo
  CC       libcurltool_la-tool_listhelp.lo
  CC       libcurltool_la-tool_main.lo
  CC       libcurltool_la-tool_msgs.lo
  CC       libcurltool_la-tool_operate.lo
  CC       libcurltool_la-tool_operhlp.lo
  CC       libcurltool_la-tool_paramhlp.lo
  CC       libcurltool_la-tool_parsecfg.lo
  CC       libcurltool_la-tool_progress.lo
  CC       libcurltool_la-tool_setopt.lo
  CC       libcurltool_la-tool_ssls.lo
  CC       libcurltool_la-tool_stderr.lo
  CC       libcurltool_la-tool_strdup.lo
  CC       libcurltool_la-tool_urlglob.lo
  CC       libcurltool_la-tool_util.lo
  CC       libcurltool_la-tool_vms.lo
  CC       libcurltool_la-tool_writeout.lo
  CC       libcurltool_la-tool_writeout_json.lo
  CC       libcurltool_la-tool_xattr.lo
  CC       libcurltool_la-var.lo
  CC       curl-tool_ca_embed.o
  CCLD     curlinfo
  CCLD     curl
  CCLD     libcurltool.la
make[1]: Leaving directory '/home/peter/curl-8.16.0/src'
Making all in scripts
make[1]: Entering directory '/home/peter/curl-8.16.0/scripts'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/home/peter/curl-8.16.0/scripts'
make[1]: Entering directory '/home/peter/curl-8.16.0'
make[1]: Nothing to be done for 'all-am'.
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 141 lines
ASSISTANT
Show reasoning

The build completed successfully. Now I need to install curl to the result directory and create the symlink as requested.

Now let's install curl:

compile-bench> cd /home/peter/curl-8.16.0 && make install
Making install in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
 /usr/bin/mkdir -p '/home/peter/result/lib'
 /bin/bash ../libtool   --mode=install /usr/bin/install -c   libcurl.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libcurl.lai /home/peter/result/lib/libcurl.la
libtool: install: /usr/bin/install -c .libs/libcurl.a /home/peter/result/lib/libcurl.a
libtool: install: chmod 644 /home/peter/result/lib/libcurl.a
libtool: install: aarch64-linux-gnu-ranlib /home/peter/result/lib/libcurl.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /home/peter/result/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/peter/curl-8.16.0/lib'
make[1]: Leaving directory '/home/peter/curl-8.16.0/lib'
Making install in docs
make[1]: Entering directory '/home/peter/curl-8.16.0/docs'
Making install in .
make[2]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /usr/bin/install -c -m 644 curl-config.1 wcurl.1 '/home/peter/result/share/man/man1'
make[3]: Leaving directory '/home/peter/curl-8.16.0/docs'
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs'
Making install in cmdline-opts
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /usr/bin/install -c -m 644 curl.1 '/home/peter/result/share/man/man1'
make[3]: Leaving directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
Making install in libcurl
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
Making install in opts
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl/
[command output truncated]
ng directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/aclocal'
 /usr/bin/install -c -m 644 libcurl.m4 '/home/peter/result/share/aclocal'
 /usr/bin/mkdir -p '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_easy_cleanup.3 curl_easy_duphandle.3 curl_easy_escape.3 curl_easy_getinfo.3 curl_easy_header.3 curl_easy_init.3 curl_easy_nextheader.3 curl_easy_option_by_id.3 curl_easy_option_by_name.3 curl_easy_option_next.3 curl_easy_pause.3 curl_easy_perform.3 curl_easy_recv.3 curl_easy_reset.3 curl_easy_send.3 curl_easy_setopt.3 curl_easy_ssls_export.3 curl_easy_ssls_import.3 curl_easy_strerror.3 curl_easy_unescape.3 curl_easy_upkeep.3 curl_escape.3 curl_formadd.3 curl_formfree.3 curl_formget.3 curl_free.3 curl_getdate.3 curl_getenv.3 curl_global_cleanup.3 curl_global_init.3 curl_global_init_mem.3 curl_global_sslset.3 curl_global_trace.3 curl_mime_addpart.3 curl_mime_data.3 curl_mime_data_cb.3 curl_mime_encoder.3 curl_mime_filedata.3 curl_mime_filename.3 curl_mime_free.3 '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_mime_headers.3 curl_mime_init.3 curl_mime_name.3 curl_mime_subparts.3 curl_mime_type.3 curl_mprintf.3 curl_multi_add_handle.3 curl_multi_assign.3 curl_multi_cleanup.3 curl_multi_fdset.3 curl_multi_get_handles.3 curl_multi_get_offt.3 curl_multi_info_read.3 curl_multi_init.3 curl_multi_perform.3 curl_multi_poll.3 curl_multi_remove_handle.3 curl_multi_setopt.3 curl_multi_socket.3 curl_multi_socket_action.3 curl_multi_socket_all.3 curl_multi_strerror.3 curl_multi_timeout.3 curl_multi_wait.3 curl_multi_waitfds.3 curl_multi_wakeup.3 curl_pushheader_byname.3 curl_pushheader_bynum.3 curl_share_cleanup.3 curl_share_init.3 curl_share_setopt.3 curl_share_strerror.3 curl_slist_append.3 curl_slist_free_all.3 curl_strequal.3 curl_strnequal.3 curl_unescape.3 curl_url.3 curl_url_cleanup.3 curl_url_dup.3 '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_url_get.3 curl_url_set.3 curl_url_strerror.3 curl_version.3 curl_version_info.3 curl_ws_meta.3 curl_ws_recv.3 curl_ws_send.3 curl_ws_start_frame.3 libcurl-easy.3 libcurl-env-dbg.3 libcurl-env.3 libcurl-errors.3 libcurl-multi.3 libcurl-security.3 libcurl-share.3 libcurl-symbols.3 libcurl-thread.3 libcurl-tutorial.3 libcurl-url.3 libcurl-ws.3 libcurl.3 '/home/peter/result/share/man/man3'
make[6]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[4]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[3]: Leaving directory '/home/peter/curl-8.16.0'
make[2]: Leaving directory '/home/peter/curl-8.16.0'
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 72 lines
ASSISTANT
Show reasoning

Now I need to:
1. Check that the curl binary was installed in /home/peter/result
2. Create a symlink from /home/peter/result/curl to the actual binary
3. Verify the binary is statically compiled for arm64
4. Test it with qemu-aarch64-static to make sure the exact command curl https://google.com works

Let me start by checking what was installed.

Now let's check what was installed and create the symlink:

compile-bench> ls -la /home/peter/result/
total 24
drwxr-xr-x 6 peter peter 4096 Sep 16 22:06 .
drwxr-x--- 1 peter peter 4096 Sep 16 22:04 ..
drwxr-xr-x 2 peter peter 4096 Sep 16 22:06 bin
drwxr-xr-x 3 peter peter 4096 Sep 16 22:06 include
drwxr-xr-x 3 peter peter 4096 Sep 16 22:06 lib
drwxr-xr-x 4 peter peter 4096 Sep 16 22:06 share
↓ 8 lines
ASSISTANT
Show reasoning

I need to check what's in the bin directory to see if the curl binary was installed there, then create the symlink as requested.

compile-bench> ls -la /home/peter/result/bin/
total 6072
drwxr-xr-x 2 peter peter    4096 Sep 16 22:06 .
drwxr-xr-x 6 peter peter    4096 Sep 16 22:06 ..
-rwxr-xr-x 1 peter peter 6185160 Sep 16 22:06 curl
-rwxr-xr-x 1 peter peter    5656 Sep 16 22:06 curl-config
-rwxr-xr-x 1 peter peter   10622 Sep 16 22:06 wcurl
↓ 7 lines
ASSISTANT
Show reasoning

Perfect! I can see that curl was built and installed in /home/peter/result/bin/curl. Now I need to:

1. Create a symlink from /home/peter/result/curl to the actual binary
2. Test the binary with qemu-aarch64-static to make sure it works with the exact command curl https://google.com

Let me first verify the binary is built for arm64:

compile-bench> file /home/peter/result/bin/curl
/home/peter/result/bin/curl: ELF 64-bit LSB pie executable, ARM aarch64, version 1 (SYSV), dynamically linked, interpreter /lib/ld-linux-aarch64.so.1, BuildID[sha1]=defbb68cfca7ff4f0b2e933eec0c222f1d6869d3, for GNU/Linux 3.7.0, not stripped
ASSISTANT
Show reasoning

I see the binary was compiled for aarch64 but it's dynamically linked, not statically linked as requested. I need to rebuild curl with proper static linking flags. Let me check what dependencies it has and then rebuild it properly.

I see the binary is dynamically linked, but we need it to be statically linked. Let me check the dependencies and rebuild it properly:

compile-bench> aarch64-linux-gnu-readelf -d /home/peter/result/bin/curl
Dynamic section at offset 0x512a50 contains 29 entries:
  Tag        Type                         Name/Value
 0x0000000000000001 (NEEDED)             Shared library: [libzstd.so.1]
 0x0000000000000001 (NEEDED)             Shared library: [libc.so.6]
 0x0000000000000001 (NEEDED)             Shared library: [ld-linux-aarch64.so.1]
 0x000000000000000c (INIT)               0x7ed48
 0x000000000000000d (FINI)               0x378cd0
 0x0000000000000019 (INIT_ARRAY)         0x4c60d0
 0x000000000000001b (INIT_ARRAYSZ)       24 (bytes)
 0x000000000000001a (FINI_ARRAY)         0x4c60e8
 0x000000000000001c (FINI_ARRAYSZ)       8 (bytes)
 0x000000006ffffef5 (GNU_HASH)           0x298
 0x0000000000000005 (STRTAB)             0x1560
 0x0000000000000006 (SYMTAB)             0x2b8
 0x000000000000000a (STRSZ)              2093 (bytes)
 0x000000000000000b (SYMENT)             24 (bytes)
 0x0000000000000015 (DEBUG)              0x0
 0x0000000000000003 (PLTGOT)             0x522c60
 0x0000000000000002 (PLTRELSZ)           4560 (bytes)
 0x0000000000000014 (PLTREL)             RELA
 0x0000000000000017 (JMPREL)             0x7db78
 0x0000000000000007 (RELA)               0x1f90
 0x0000000000000008 (RELASZ)             506856 (bytes)
 0x0000000000000009 (RELAENT)            24 (bytes)
 0x000000000000001e (FLAGS)              BIND_NOW
 0x000000006ffffffb (FLAGS_1)            Flags: NOW PIE
 0x000000006ffffffe (VERNEED)            0x1f20
 0x000000006fffffff (VERNEEDNUM)         2
 0x000000006ffffff0 (VERSYM)             0x1d8e
 0x000000006ffffff9 (RELACOUNT)          21097
 0x0000000000000000 (NULL)               0x0
↓ 32 lines
ASSISTANT
Show reasoning

The binary is still dynamically linked to libzstd.so.1 and other system libraries. I need to rebuild curl with proper static linking. Let me clean the build and reconfigure with the right flags to ensure static linking.

I need to rebuild curl with proper static linking flags. Let me clean and reconfigure:

compile-bench> cd /home/peter/curl-8.16.0 && make clean
Making clean in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
test -z "unitprotos.h" || rm -f unitprotos.h
test -z "libcurl.la" || rm -f libcurl.la
rm -f ./so_locations
rm -rf .libs _libs
rm -rf curlx/.libs curlx/_libs
rm -rf vauth/.libs vauth/_libs
rm -rf vquic/.libs vquic/_libs
rm -rf vssh/.libs vssh/_libs
rm -rf vtls/.libs vtls/_libs
test -z "libcurlu.la" || rm -f libcurlu.la
rm -f ./so_locations
rm -f *.o
rm -f curlx/*.o
rm -f curlx/*.lo
rm -f vauth/*.o
rm -f vauth/*.lo
rm -f vquic/*.o
rm -f vquic/*.lo
rm -f vssh/*.o
rm -f vssh/*.lo
rm -f vtls/*.o
rm -f vtls/*.lo
rm -f *.lo
make[1]: Leaving directory '/home/peter/curl-8.16.0/lib'
Making clean in docs
make[1]: Entering directory '/home/peter/curl-8.16.0/docs'
Making clean in .
make[2]: Entering directory '/home/peter/curl-8.16.0/docs'
test -z "mk-ca-bundle.1 curl-config.1 wcurl.1 runtests.1 testcurl.1" || rm -f mk-ca-bundle.1 curl-config.1 wcurl.1 runtests.1 testcurl.1
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs'
Making clean in cmdline-opts
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
test -z "curl.1 curl.txt" || rm -f curl.1 curl.txt
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
Making clean in libcurl
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
Making clean in opts
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
test -z "CURLINFO_ACTIVESOCKET.3 CURLINFO_APPCONNECT_TIME.3 CURLINFO_APPCONNECT_TIME_T.3 CURLINFO_CAINFO.3 CURLINFO_CAPATH.3 CURLINFO_CERTINFO.3 CURLINFO_CONDITION_UNMET.3 CURLINFO_CONNECT_TIME.3 CURLINFO_CONN_ID.3 CURLINFO_CONNECT_TIME_T.3 CURLINFO_CONTENT_LENGTH_DOWNLOAD.3 CURLINFO_CONTENT_LENGTH_DOWNLOAD_T.3 CURLINFO_CONTENT_LENGTH_UPLOAD.3 CURLINFO_CONTENT_LENGTH_UPLOAD_T.3 CURLINFO_CONTENT_TYPE.3 CURLINFO_COOKIELIST.3 CURLINFO_EARLYDATA_SENT_T.3 CURLINFO_EFFECTIVE_METHOD.3 CURLINFO_EFFECTIVE_URL.3 CURLINFO_FILETIME.3 CURLINFO_FILETIME_T.3 CURLINFO_FTP_ENTRY_PATH.3 CURLINFO_HEADER_SIZE.3 CURLINFO_HTTP_CONNECTCODE.3 CURLINFO_HTTP_VERSION.3 CURLINFO_HTTPAUTH_AVAIL.3 CURLINFO_HTTPAUTH_USED.3 CURLINFO_LASTSOCKET.3 CURLINFO_LOCAL_IP.3 CURLINFO_LOCAL_PORT.3 CURLINFO_NAMELOOKUP_TIME.3 CURLINFO_NAMELOOKUP_TIME_T.3 CURLINFO_NUM_CONNECTS.3 CURLINFO_OS_ERRNO.3 CURLINFO_PRETRANSFER_TIME.3 CURLINFO_PRETRANSFER_TIME_T.3 CURLINFO_POSTTRANSFER_TIME_T.3 CURLINFO_PRIMARY_IP.3 CURLINFO_PRIMARY_PORT.3 CURLINFO_PRIVATE.3 CURLINFO_PROTOCOL.3 CURLINFO_PROXY_ERROR.3 CURLINFO_PROXY_SSL_VERIFYRESULT.3 CURLINFO_PROXYAUTH_AVAIL.3 CURLINFO_PROXYAUTH_USED.3 CURLINFO_QUEUE_TIME_T.3 CURLINFO_REDIRECT_COUNT.3 CURLINFO_REDIRECT_TIME.3 CURLINFO_REDIRECT_TIME_T.3 CURLINFO_REDIRECT_URL.3 CURLINFO_REFERER.3 CURLINFO_REQUEST_SIZE.3 CURLINFO_RESPONSE_CODE.3 CURLINFO_RETRY_AFTER.3 CURLINFO_RTSP_CLIENT_CSEQ.3 CURLINFO_RTSP_CSEQ_RECV.3 CURLINFO_RTSP_SERVER_CSEQ.3 CURLINFO_RTSP_SESSION_ID.3 CUR
[command output truncated]
rt test-ca.crt test-ca.key test-localhost.crl test-localhost.crt test-localhost.key test-localhost.pem test-localhost.pub.der test-localhost.pub.pem test-localhost.nn.crl test-localhost.nn.crt test-localhost.nn.key test-localhost.nn.pem test-localhost.nn.pub.der test-localhost.nn.pub.pem test-localhost0h.crl test-localhost0h.crt test-localhost0h.key test-localhost0h.pem test-localhost0h.pub.der test-localhost0h.pub.pem test-localhost-san-first.crl test-localhost-san-first.crt test-localhost-san-first.key test-localhost-san-first.pem test-localhost-san-first.pub.der test-localhost-san-first.pub.pem test-localhost-san-last.crl test-localhost-san-last.crt test-localhost-san-last.key test-localhost-san-last.pem test-localhost-san-last.pub.der test-localhost-san-last.pub.pem test-client-cert.crl test-client-cert.crt test-client-cert.key test-client-cert.pem test-client-cert.pub.der test-client-cert.pub.pem \
  test-*.csr \
  test-*.der \
  test-*.keyenc \
  test-ca.cnt* \
  test-ca.db* \
  test-ca.raw* \
  test-ca.srl
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/certs'
Making clean in data
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/data'
rm -rf .libs _libs
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/data'
Making clean in server
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/server'
test -z "servers.c" || rm -f servers.c
rm -rf .libs _libs
rm -f servers
 rm -f servers
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/server'
Making clean in libtest
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/libtest'
test -z "libtests.c lib1521.c" || rm -f libtests.c lib1521.c
rm -rf .libs _libs
rm -f libtests
 rm -f libtests
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/libtest'
Making clean in http
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/http'
rm -rf .libs _libs
rm -rf *.pyc __pycache__
rm -rf gen
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/http'
Making clean in unit
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/unit'
test -z "units.c" || rm -f units.c
rm -rf .libs _libs
rm -f units
 rm -f units
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/unit'
Making clean in tunit
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/tunit'
test -z "tunits.c" || rm -f tunits.c
rm -rf .libs _libs
rm -f tunits
 rm -f tunits
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/tunit'
make[3]: Entering directory '/home/peter/curl-8.16.0/tests'
test -z ".http.pid .https.pid .ftp.pid .ftps.pid" || rm -f .http.pid .https.pid .ftp.pid .ftps.pid
rm -rf .libs _libs
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests'
make[2]: Leaving directory '/home/peter/curl-8.16.0/tests'
rm -f *.lo
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 113 lines
ASSISTANT
Show reasoning

The user wants me to build curl statically for arm64. The previous build was dynamically linked as we saw from the readelf output. I need to configure curl with proper static linking flags to ensure it's completely static.

Let me reconfigure with better static linking flags, including -static in LDFLAGS and potentially other flags to force static linking.

compile-bench> cd /home/peter/curl-8.16.0 && export CC=aarch64-linux-gnu-gcc && export CXX=aarch64-linux-gnu-g++ && export AR=aarch64-linux-gnu-ar && export STRIP=aarch64-linux-gnu-strip && export PKG_CONFIG_PATH=/home/peter/build-deps/lib/pkgconfig && export CPPFLAGS="-I/home/peter/build-deps/include" && export LDFLAGS="-L/home/peter/build-deps/lib -static" && export LIBS="-lssl -lcrypto -lz -lbrotlidec -lbrotlicommon -lzstd -ldl -lpthread" && ./configure --host=aarch64-linux-gnu --prefix=/home/peter/result --enable-static --disable-shared --with-openssl=/home/peter/build-deps --with-zlib=/home/peter/build-deps --with-brotli=/home/peter/build-deps --with-zstd=/home/peter/build-deps --disable-ldap --disable-ldaps --disable-rtsp --disable-dict --disable-telnet --disable-tftp --disable-pop3 --disable-imap --disable-smb --disable-smtp --disable-gopher --disable-manual --disable-libcurl-option --enable-ipv6 --enable-http --enable-ftp --enable-file --enable-proxy --enable-cookies --without-libpsl
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for a BSD-compatible install... /usr/bin/install -c
checking for aarch64-linux-gnu-gcc... aarch64-linux-gnu-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether aarch64-linux-gnu-gcc accepts -g... yes
checking for aarch64-linux-gnu-gcc option to enable C11 features... none needed
checking whether aarch64-linux-gnu-gcc understands -c and -o together... yes
checking how to run the C preprocessor... aarch64-linux-gnu-gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for aarch64-linux-gnu-strip... aarch64-linux-gnu-strip
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of aarch64-linux-gnu-gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... aarch64-unknown-linux-gnu
checking for grep that handles long lines an
[command output truncated]
.h
config.status: lib/curl_config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands
configure: Configured to build curl/libcurl:

  Host setup:       aarch64-unknown-linux-gnu
  Install prefix:   /home/peter/result
  Compiler:         aarch64-linux-gnu-gcc
   CFLAGS:          -Werror-implicit-function-declaration -O2 -Wno-system-headers
   CFLAGS extras:   
   CPPFLAGS:        -isystem /home/peter/build-deps/include -D_GNU_SOURCE -isystem /home/peter/build-deps/include -isystem /home/peter/build-deps/include -isystem /home/peter/build-deps/include -isystem /home/peter/build-deps/include
   LDFLAGS:         -L/home/peter/build-deps/lib -static -L/home/peter/build-deps/lib -L/home/peter/build-deps/lib -L/home/peter/build-deps/lib -L/home/peter/build-deps/lib
     curl-config:   -L/home/peter/build-deps/lib -L/home/peter/build-deps/lib -L/home/peter/build-deps/lib -L/home/peter/build-deps/lib
   LIBS:            -lssl -lcrypto -lssl -lcrypto -lzstd -lzstd -lbrotlidec -lbrotlidec -lbrotlicommon -lz -lssl -lcrypto -lz -lbrotlidec -lbrotlicommon -lzstd -ldl -lpthread

  curl version:     8.16.0
  SSL:              enabled (OpenSSL v3+)
  SSH:              no      (--with-{libssh,libssh2})
  zlib:             enabled
  brotli:           enabled (libbrotlidec)
  zstd:             enabled (libzstd)
  GSS-API:          no      (--with-gssapi)
  GSASL:            no      (libgsasl not found)
  TLS-SRP:          enabled
  resolver:         POSIX threaded
  IPv6:             enabled
  Unix sockets:     enabled
  IDN:              no      (--with-{libidn2,winidn})
  Build docs:       enabled (--disable-docs)
  Build libcurl:    Shared=no, Static=yes
  Built-in manual:  no      (--enable-manual)
  --libcurl option: no
  Verbose errors:   enabled (--disable-verbose)
  Code coverage:    disabled
  SSPI:             no      (--enable-sspi)
  ca cert bundle:   no
  ca cert path:     no
  ca cert embed:    no
  ca fallback:      no
  LDAP:             no      (--enable-ldap / --with-ldap-lib / --with-lber-lib)
  LDAPS:            no      (--enable-ldaps)
  IPFS/IPNS:        enabled
  RTSP:             no      (--enable-rtsp)
  RTMP:             no      (--with-librtmp)
  PSL:              no      (--with-libpsl)
  Alt-svc:          enabled (--disable-alt-svc)
  Headers API:      enabled (--disable-headers-api)
  HSTS:             enabled (--disable-hsts)
  HTTP1:            enabled (internal)
  HTTP2:            no      (--with-nghttp2)
  HTTP3:            no      (--with-ngtcp2 --with-nghttp3, --with-quiche, --with-openssl-quic)
  ECH:              no      (--enable-ech)
  HTTPS RR:         no      (--enable-httpsrr)
  SSLS-EXPORT:      no      (--enable-ssls-export)
  Protocols:        file ftp ftps http https ipfs ipns mqtt ws wss
  Features:         alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM SSL threadsafe TLS-SRP UnixSockets zstd
↓ 123 lines
ASSISTANT
Show reasoning

The configuration looks good and shows that it will build static libraries and has all the required features. Now I need to build it and install it.

compile-bench> cd /home/peter/curl-8.16.0 && make -j$(nproc)
Making all in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make  all-am
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
  CC       vauth/libcurl_la-cleartext.lo
  CC       vauth/libcurl_la-cram.lo
  CC       vauth/libcurl_la-digest.lo
  CC       vauth/libcurl_la-digest_sspi.lo
  CC       vauth/libcurl_la-gsasl.lo
  CC       vauth/libcurl_la-krb5_gssapi.lo
  CC       vauth/libcurl_la-krb5_sspi.lo
  CC       vauth/libcurl_la-ntlm.lo
  CC       vauth/libcurl_la-ntlm_sspi.lo
  CC       vauth/libcurl_la-oauth2.lo
  CC       vauth/libcurl_la-spnego_gssapi.lo
  CC       vauth/libcurl_la-spnego_sspi.lo
  CC       vauth/libcurl_la-vauth.lo
  CC       vtls/libcurl_la-cipher_suite.lo
  CC       vtls/libcurl_la-gtls.lo
  CC       vtls/libcurl_la-hostcheck.lo
  CC       vtls/libcurl_la-keylog.lo
  CC       vtls/libcurl_la-mbedtls.lo
  CC       vtls/libcurl_la-mbedtls_threadlock.lo
  CC       vtls/libcurl_la-openssl.lo
  CC       vtls/libcurl_la-rustls.lo
  CC       vtls/libcurl_la-schannel.lo
  CC       vtls/libcurl_la-schannel_verify.lo
  CC       vtls/libcurl_la-vtls.lo
  CC       vtls/libcurl_la-vtls_scache.lo
  CC       vtls/libcurl_la-vtls_spack.lo
  CC       vtls/libcurl_la-wolfssl.lo
  CC       vtls/libcurl_la-x509asn1.lo
  CC       vquic/libcurl_la-curl_ngtcp2.lo
  CC       vquic/libcurl_la-curl_osslq.lo
  CC       vquic/libcurl_la-curl_quiche.lo
  CC       vquic/libcurl_la-vquic.lo
  CC       vquic/libcurl_la-vquic-tls.lo
  CC       vssh/libcurl_la-libssh.lo
  CC       vssh/libcurl_la-libssh2.lo
  CC       vssh/libcurl_la-curl_path.lo
  CC       vssh/libcurl_la-wolfssh.lo
  CC       curlx/libcurl_la-base64.lo
  CC       curlx/libcurl_la-dynbuf.lo
  CC       curlx/libcurl_la-inet_ntop.lo
  CC       curlx/libcurl_la-inet_pton.lo
  CC       curlx/libcurl_la-multibyte.lo
  CC       curlx/libcurl_la-nonblock.lo
  CC       curlx/libcurl_la-strparse.lo
  CC       curlx/libcurl_la-timediff.lo
  CC       curlx/libcurl_la-timeval.lo
  CC       curlx/libcurl_la-version_win32.lo
  CC       curlx/libcurl_la-wait.lo
  CC       curlx/libcurl_la-warnless.lo
  CC       curlx/libcurl_la-winapi.lo
  CC       libcurlu_la-altsvc.lo
  CC       libcurlu_la-amigaos.lo
  CC       libcurlu_la-asyn-ares.lo
  CC       libcurlu_la-asyn-base.lo
  CC       libcurlu_la-asyn-thrdd.lo
  CC       libcurlu_la-bufq.lo
  CC       libcurlu_la-bufref.lo
  CC       libcurlu_la-cf-h1-proxy.lo
  CC       libcurlu_la-cf-h2-proxy.lo
  CC       libcurlu_la-cf-haproxy.lo
  CC       libcurlu_la-cf-https-connect.lo
  CC       libcurlu_la-cf-ip-happy.lo
  CC       libcurlu_la-cf-socket.lo
  CC       libcurlu_la-cfilters.lo
  CC       libcurlu_la-conncache.lo
  CC       libcurlu_la-connect.lo
[command output truncated]
  CC       curl-tool_strdup.o
  CC       curl-tool_urlglob.o
  CC       curl-tool_util.o
  CC       curl-tool_vms.o
  CC       curl-tool_writeout.o
  CC       curl-tool_writeout_json.o
  CC       curl-tool_xattr.o
  CC       curl-var.o
echo '/* !checksrc! disable COPYRIGHT all */' > tool_hugehelp.c;   \
echo '#include "tool_hugehelp.h"' >> tool_hugehelp.c
echo '/* !checksrc! disable COPYRIGHT all */' > tool_ca_embed.c
echo 'extern const void *curl_ca_embed; const void *curl_ca_embed;' >> tool_ca_embed.c
  CC       curlinfo.o
  CC       libcurltool_la-config2setopts.lo
  CC       libcurltool_la-slist_wc.lo
  CC       libcurltool_la-terminal.lo
  CC       libcurltool_la-tool_bname.lo
  CC       libcurltool_la-tool_cb_dbg.lo
  CC       libcurltool_la-tool_cb_hdr.lo
  CC       libcurltool_la-tool_cb_prg.lo
  CC       libcurltool_la-tool_cb_rea.lo
  CC       libcurltool_la-tool_cb_see.lo
  CC       libcurltool_la-tool_cb_soc.lo
  CC       libcurltool_la-tool_cb_wrt.lo
  CC       libcurltool_la-tool_cfgable.lo
  CC       libcurltool_la-tool_dirhie.lo
  CC       libcurltool_la-tool_doswin.lo
  CC       libcurltool_la-tool_easysrc.lo
  CC       libcurltool_la-tool_filetime.lo
  CC       libcurltool_la-tool_findfile.lo
  CC       libcurltool_la-tool_formparse.lo
  CC       libcurltool_la-tool_getparam.lo
  CC       libcurltool_la-tool_getpass.lo
  CC       libcurltool_la-tool_help.lo
  CC       libcurltool_la-tool_helpers.lo
  CC       libcurltool_la-tool_ipfs.lo
  CC       libcurltool_la-tool_libinfo.lo
  CC       libcurltool_la-tool_listhelp.lo
  CC       libcurltool_la-tool_main.lo
  CC       libcurltool_la-tool_msgs.lo
  CC       libcurltool_la-tool_operate.lo
  CC       libcurltool_la-tool_operhlp.lo
  CC       libcurltool_la-tool_paramhlp.lo
  CC       libcurltool_la-tool_parsecfg.lo
  CC       libcurltool_la-tool_progress.lo
  CC       libcurltool_la-tool_setopt.lo
  CC       libcurltool_la-tool_ssls.lo
  CC       libcurltool_la-tool_stderr.lo
  CC       libcurltool_la-tool_strdup.lo
  CC       libcurltool_la-tool_urlglob.lo
  CC       libcurltool_la-tool_util.lo
  CC       libcurltool_la-tool_vms.lo
  CC       libcurltool_la-tool_writeout.lo
  CC       libcurltool_la-tool_writeout_json.lo
  CC       libcurltool_la-tool_xattr.lo
  CC       libcurltool_la-var.lo
  CC       curl-tool_hugehelp.o
  CC       curl-tool_ca_embed.o
  CCLD     curlinfo
  CCLD     curl
  CCLD     libcurltool.la
make[1]: Leaving directory '/home/peter/curl-8.16.0/src'
Making all in scripts
make[1]: Entering directory '/home/peter/curl-8.16.0/scripts'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/home/peter/curl-8.16.0/scripts'
make[1]: Entering directory '/home/peter/curl-8.16.0'
make[1]: Nothing to be done for 'all-am'.
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 141 lines
ASSISTANT
Show reasoning

The build completed. Now let me check if the binary is properly statically linked this time, and then install it.

compile-bench> file /home/peter/curl-8.16.0/src/curl
/home/peter/curl-8.16.0/src/curl: ELF 64-bit LSB pie executable, ARM aarch64, version 1 (SYSV), dynamically linked, interpreter /lib/ld-linux-aarch64.so.1, BuildID[sha1]=cbeb539849e890a594250d3596fb630ee4fb7bfc, for GNU/Linux 3.7.0, not stripped
ASSISTANT
Show reasoning

The binary is still dynamically linked. I need to check what dependencies it has and try to make it fully static. Let me check the dependencies first, then try a different approach.

compile-bench> aarch64-linux-gnu-readelf -d /home/peter/curl-8.16.0/src/curl | head -20
Dynamic section at offset 0x512a50 contains 29 entries:
  Tag        Type                         Name/Value
 0x0000000000000001 (NEEDED)             Shared library: [libzstd.so.1]
 0x0000000000000001 (NEEDED)             Shared library: [libc.so.6]
 0x0000000000000001 (NEEDED)             Shared library: [ld-linux-aarch64.so.1]
 0x000000000000000c (INIT)               0x7ed48
 0x000000000000000d (FINI)               0x378cd0
 0x0000000000000019 (INIT_ARRAY)         0x4c60d0
 0x000000000000001b (INIT_ARRAYSZ)       24 (bytes)
 0x000000000000001a (FINI_ARRAY)         0x4c60e8
 0x000000000000001c (FINI_ARRAYSZ)       8 (bytes)
 0x000000006ffffef5 (GNU_HASH)           0x298
 0x0000000000000005 (STRTAB)             0x1560
 0x0000000000000006 (SYMTAB)             0x2b8
 0x000000000000000a (STRSZ)              2093 (bytes)
 0x000000000000000b (SYMENT)             24 (bytes)
 0x0000000000000015 (DEBUG)              0x0
 0x0000000000000003 (PLTGOT)             0x522c60
 0x0000000000000002 (PLTRELSZ)           4560 (bytes)
↓ 20 lines
ASSISTANT
Show reasoning

The curl binary is still dynamically linked. It's linking against libzstd.so.1. The issue is that the system provided dynamic zstd library is being used instead of our static version. I need to modify the build to ensure full static linking.

Let me try a different approach. I need to modify the LDFLAGS to force static linking and specify all the libraries needed explicitly.

The curl binary is still dynamically linked to zstd. Let me try a different approach to force complete static linking:

compile-bench> cd /home/peter/curl-8.16.0 && make clean
Making clean in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
test -z "unitprotos.h" || rm -f unitprotos.h
test -z "libcurl.la" || rm -f libcurl.la
rm -f ./so_locations
rm -rf .libs _libs
rm -rf curlx/.libs curlx/_libs
rm -rf vauth/.libs vauth/_libs
rm -rf vquic/.libs vquic/_libs
rm -rf vssh/.libs vssh/_libs
rm -rf vtls/.libs vtls/_libs
test -z "libcurlu.la" || rm -f libcurlu.la
rm -f ./so_locations
rm -f *.o
rm -f curlx/*.o
rm -f curlx/*.lo
rm -f vauth/*.o
rm -f vauth/*.lo
rm -f vquic/*.o
rm -f vquic/*.lo
rm -f vssh/*.o
rm -f vssh/*.lo
rm -f vtls/*.o
rm -f vtls/*.lo
rm -f *.lo
make[1]: Leaving directory '/home/peter/curl-8.16.0/lib'
Making clean in docs
make[1]: Entering directory '/home/peter/curl-8.16.0/docs'
Making clean in .
make[2]: Entering directory '/home/peter/curl-8.16.0/docs'
test -z "mk-ca-bundle.1 curl-config.1 wcurl.1 runtests.1 testcurl.1" || rm -f mk-ca-bundle.1 curl-config.1 wcurl.1 runtests.1 testcurl.1
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs'
Making clean in cmdline-opts
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
test -z "curl.1 curl.txt" || rm -f curl.1 curl.txt
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
Making clean in libcurl
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
Making clean in opts
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
test -z "CURLINFO_ACTIVESOCKET.3 CURLINFO_APPCONNECT_TIME.3 CURLINFO_APPCONNECT_TIME_T.3 CURLINFO_CAINFO.3 CURLINFO_CAPATH.3 CURLINFO_CERTINFO.3 CURLINFO_CONDITION_UNMET.3 CURLINFO_CONNECT_TIME.3 CURLINFO_CONN_ID.3 CURLINFO_CONNECT_TIME_T.3 CURLINFO_CONTENT_LENGTH_DOWNLOAD.3 CURLINFO_CONTENT_LENGTH_DOWNLOAD_T.3 CURLINFO_CONTENT_LENGTH_UPLOAD.3 CURLINFO_CONTENT_LENGTH_UPLOAD_T.3 CURLINFO_CONTENT_TYPE.3 CURLINFO_COOKIELIST.3 CURLINFO_EARLYDATA_SENT_T.3 CURLINFO_EFFECTIVE_METHOD.3 CURLINFO_EFFECTIVE_URL.3 CURLINFO_FILETIME.3 CURLINFO_FILETIME_T.3 CURLINFO_FTP_ENTRY_PATH.3 CURLINFO_HEADER_SIZE.3 CURLINFO_HTTP_CONNECTCODE.3 CURLINFO_HTTP_VERSION.3 CURLINFO_HTTPAUTH_AVAIL.3 CURLINFO_HTTPAUTH_USED.3 CURLINFO_LASTSOCKET.3 CURLINFO_LOCAL_IP.3 CURLINFO_LOCAL_PORT.3 CURLINFO_NAMELOOKUP_TIME.3 CURLINFO_NAMELOOKUP_TIME_T.3 CURLINFO_NUM_CONNECTS.3 CURLINFO_OS_ERRNO.3 CURLINFO_PRETRANSFER_TIME.3 CURLINFO_PRETRANSFER_TIME_T.3 CURLINFO_POSTTRANSFER_TIME_T.3 CURLINFO_PRIMARY_IP.3 CURLINFO_PRIMARY_PORT.3 CURLINFO_PRIVATE.3 CURLINFO_PROTOCOL.3 CURLINFO_PROXY_ERROR.3 CURLINFO_PROXY_SSL_VERIFYRESULT.3 CURLINFO_PROXYAUTH_AVAIL.3 CURLINFO_PROXYAUTH_USED.3 CURLINFO_QUEUE_TIME_T.3 CURLINFO_REDIRECT_COUNT.3 CURLINFO_REDIRECT_TIME.3 CURLINFO_REDIRECT_TIME_T.3 CURLINFO_REDIRECT_URL.3 CURLINFO_REFERER.3 CURLINFO_REQUEST_SIZE.3 CURLINFO_RESPONSE_CODE.3 CURLINFO_RETRY_AFTER.3 CURLINFO_RTSP_CLIENT_CSEQ.3 CURLINFO_RTSP_CSEQ_RECV.3 CURLINFO_RTSP_SERVER_CSEQ.3 CURLINFO_RTSP_SESSION_ID.3 CUR
[command output truncated]
rt test-ca.crt test-ca.key test-localhost.crl test-localhost.crt test-localhost.key test-localhost.pem test-localhost.pub.der test-localhost.pub.pem test-localhost.nn.crl test-localhost.nn.crt test-localhost.nn.key test-localhost.nn.pem test-localhost.nn.pub.der test-localhost.nn.pub.pem test-localhost0h.crl test-localhost0h.crt test-localhost0h.key test-localhost0h.pem test-localhost0h.pub.der test-localhost0h.pub.pem test-localhost-san-first.crl test-localhost-san-first.crt test-localhost-san-first.key test-localhost-san-first.pem test-localhost-san-first.pub.der test-localhost-san-first.pub.pem test-localhost-san-last.crl test-localhost-san-last.crt test-localhost-san-last.key test-localhost-san-last.pem test-localhost-san-last.pub.der test-localhost-san-last.pub.pem test-client-cert.crl test-client-cert.crt test-client-cert.key test-client-cert.pem test-client-cert.pub.der test-client-cert.pub.pem \
  test-*.csr \
  test-*.der \
  test-*.keyenc \
  test-ca.cnt* \
  test-ca.db* \
  test-ca.raw* \
  test-ca.srl
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/certs'
Making clean in data
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/data'
rm -rf .libs _libs
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/data'
Making clean in server
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/server'
test -z "servers.c" || rm -f servers.c
rm -rf .libs _libs
rm -f servers
 rm -f servers
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/server'
Making clean in libtest
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/libtest'
test -z "libtests.c lib1521.c" || rm -f libtests.c lib1521.c
rm -rf .libs _libs
rm -f libtests
 rm -f libtests
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/libtest'
Making clean in http
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/http'
rm -rf .libs _libs
rm -rf *.pyc __pycache__
rm -rf gen
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/http'
Making clean in unit
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/unit'
test -z "units.c" || rm -f units.c
rm -rf .libs _libs
rm -f units
 rm -f units
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/unit'
Making clean in tunit
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/tunit'
test -z "tunits.c" || rm -f tunits.c
rm -rf .libs _libs
rm -f tunits
 rm -f tunits
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/tunit'
make[3]: Entering directory '/home/peter/curl-8.16.0/tests'
test -z ".http.pid .https.pid .ftp.pid .ftps.pid" || rm -f .http.pid .https.pid .ftp.pid .ftps.pid
rm -rf .libs _libs
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests'
make[2]: Leaving directory '/home/peter/curl-8.16.0/tests'
rm -f *.lo
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 113 lines
ASSISTANT
Show reasoning

The issue seems to be that even with the -static flag, zstd is still linking dynamically. I need to make sure that the zstd library is properly linked statically. Let me remove the shared library from the zstd installation so that only the static version is available.

compile-bench> rm -f /home/peter/build-deps/lib/libzstd.so*
[empty output]
ASSISTANT
Show reasoning

Now I need to rebuild curl. Let me remove the shared libraries to force static linking, and also try a different approach by setting LDFLAGS more aggressively.

compile-bench> cd /home/peter/curl-8.16.0 && export CC=aarch64-linux-gnu-gcc && export CXX=aarch64-linux-gnu-g++ && export AR=aarch64-linux-gnu-ar && export STRIP=aarch64-linux-gnu-strip && export PKG_CONFIG_PATH=/home/peter/build-deps/lib/pkgconfig && export CPPFLAGS="-I/home/peter/build-deps/include" && export LDFLAGS="-L/home/peter/build-deps/lib -static -Wl,--whole-archive -Wl,--no-whole-archive" && export LIBS="-lssl -lcrypto -lz -lbrotlidec -lbrotlicommon -lzstd -ldl -lpthread" && ./configure --host=aarch64-linux-gnu --prefix=/home/peter/result --enable-static --disable-shared --with-openssl=/home/peter/build-deps --with-zlib=/home/peter/build-deps --with-brotli=/home/peter/build-deps --with-zstd=/home/peter/build-deps --disable-ldap --disable-ldaps --disable-rtsp --disable-dict --disable-telnet --disable-tftp --disable-pop3 --disable-imap --disable-smb --disable-smtp --disable-gopher --disable-manual --disable-libcurl-option --enable-ipv6 --enable-http --enable-ftp --enable-file --enable-proxy --enable-cookies --without-libpsl
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for a BSD-compatible install... /usr/bin/install -c
checking for aarch64-linux-gnu-gcc... aarch64-linux-gnu-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether aarch64-linux-gnu-gcc accepts -g... yes
checking for aarch64-linux-gnu-gcc option to enable C11 features... none needed
checking whether aarch64-linux-gnu-gcc understands -c and -o together... yes
checking how to run the C preprocessor... aarch64-linux-gnu-gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for aarch64-linux-gnu-strip... aarch64-linux-gnu-strip
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of aarch64-linux-gnu-gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... aarch64-unknown-linux-gnu
checking for grep that handles long lines an
[command output truncated]
hanged
config.status: executing depfiles commands
config.status: executing libtool commands
configure: Configured to build curl/libcurl:

  Host setup:       aarch64-unknown-linux-gnu
  Install prefix:   /home/peter/result
  Compiler:         aarch64-linux-gnu-gcc
   CFLAGS:          -Werror-implicit-function-declaration -O2 -Wno-system-headers
   CFLAGS extras:   
   CPPFLAGS:        -isystem /home/peter/build-deps/include -D_GNU_SOURCE -isystem /home/peter/build-deps/include -isystem /home/peter/build-deps/include -isystem /home/peter/build-deps/include -isystem /home/peter/build-deps/include
   LDFLAGS:         -L/home/peter/build-deps/lib -static -Wl,--whole-archive -Wl,--no-whole-archive -L/home/peter/build-deps/lib -L/home/peter/build-deps/lib -L/home/peter/build-deps/lib -L/home/peter/build-deps/lib
     curl-config:   -L/home/peter/build-deps/lib -L/home/peter/build-deps/lib -L/home/peter/build-deps/lib -L/home/peter/build-deps/lib
   LIBS:            -lssl -lcrypto -lssl -lcrypto -lzstd -lzstd -lbrotlidec -lbrotlidec -lbrotlicommon -lz -lssl -lcrypto -lz -lbrotlidec -lbrotlicommon -lzstd -ldl -lpthread

  curl version:     8.16.0
  SSL:              enabled (OpenSSL v3+)
  SSH:              no      (--with-{libssh,libssh2})
  zlib:             enabled
  brotli:           enabled (libbrotlidec)
  zstd:             enabled (libzstd)
  GSS-API:          no      (--with-gssapi)
  GSASL:            no      (libgsasl not found)
  TLS-SRP:          enabled
  resolver:         POSIX threaded
  IPv6:             enabled
  Unix sockets:     enabled
  IDN:              no      (--with-{libidn2,winidn})
  Build docs:       enabled (--disable-docs)
  Build libcurl:    Shared=no, Static=yes
  Built-in manual:  no      (--enable-manual)
  --libcurl option: no
  Verbose errors:   enabled (--disable-verbose)
  Code coverage:    disabled
  SSPI:             no      (--enable-sspi)
  ca cert bundle:   no
  ca cert path:     no
  ca cert embed:    no
  ca fallback:      no
  LDAP:             no      (--enable-ldap / --with-ldap-lib / --with-lber-lib)
  LDAPS:            no      (--enable-ldaps)
  IPFS/IPNS:        enabled
  RTSP:             no      (--enable-rtsp)
  RTMP:             no      (--with-librtmp)
  PSL:              no      (--with-libpsl)
  Alt-svc:          enabled (--disable-alt-svc)
  Headers API:      enabled (--disable-headers-api)
  HSTS:             enabled (--disable-hsts)
  HTTP1:            enabled (internal)
  HTTP2:            no      (--with-nghttp2)
  HTTP3:            no      (--with-ngtcp2 --with-nghttp3, --with-quiche, --with-openssl-quic)
  ECH:              no      (--enable-ech)
  HTTPS RR:         no      (--enable-httpsrr)
  SSLS-EXPORT:      no      (--enable-ssls-export)
  Protocols:        file ftp ftps http https ipfs ipns mqtt ws wss
  Features:         alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM SSL threadsafe TLS-SRP UnixSockets zstd
↓ 122 lines
ASSISTANT
Show reasoning

I need to try a different approach to get completely static linking. Let me try building with all dependencies listed explicitly and removing shared libraries to force static linking.

compile-bench> cd /home/peter/curl-8.16.0 && make -j$(nproc)
Making all in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make  all-am
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
  CC       vauth/libcurl_la-cleartext.lo
  CC       vauth/libcurl_la-cram.lo
  CC       vauth/libcurl_la-digest.lo
  CC       vauth/libcurl_la-digest_sspi.lo
  CC       vauth/libcurl_la-gsasl.lo
  CC       vauth/libcurl_la-krb5_gssapi.lo
  CC       vauth/libcurl_la-krb5_sspi.lo
  CC       vauth/libcurl_la-ntlm.lo
  CC       vauth/libcurl_la-ntlm_sspi.lo
  CC       vauth/libcurl_la-oauth2.lo
  CC       vauth/libcurl_la-spnego_gssapi.lo
  CC       vauth/libcurl_la-spnego_sspi.lo
  CC       vauth/libcurl_la-vauth.lo
  CC       vtls/libcurl_la-cipher_suite.lo
  CC       vtls/libcurl_la-gtls.lo
  CC       vtls/libcurl_la-hostcheck.lo
  CC       vtls/libcurl_la-keylog.lo
  CC       vtls/libcurl_la-mbedtls.lo
  CC       vtls/libcurl_la-mbedtls_threadlock.lo
  CC       vtls/libcurl_la-openssl.lo
  CC       vtls/libcurl_la-rustls.lo
  CC       vtls/libcurl_la-schannel.lo
  CC       vtls/libcurl_la-schannel_verify.lo
  CC       vtls/libcurl_la-vtls.lo
  CC       vtls/libcurl_la-vtls_scache.lo
  CC       vtls/libcurl_la-vtls_spack.lo
  CC       vtls/libcurl_la-wolfssl.lo
  CC       vtls/libcurl_la-x509asn1.lo
  CC       vquic/libcurl_la-curl_ngtcp2.lo
  CC       vquic/libcurl_la-curl_osslq.lo
  CC       vquic/libcurl_la-curl_quiche.lo
  CC       vquic/libcurl_la-vquic.lo
  CC       vquic/libcurl_la-vquic-tls.lo
  CC       vssh/libcurl_la-libssh.lo
  CC       vssh/libcurl_la-libssh2.lo
  CC       vssh/libcurl_la-curl_path.lo
  CC       vssh/libcurl_la-wolfssh.lo
  CC       curlx/libcurl_la-base64.lo
  CC       curlx/libcurl_la-dynbuf.lo
  CC       curlx/libcurl_la-inet_ntop.lo
  CC       curlx/libcurl_la-inet_pton.lo
  CC       curlx/libcurl_la-multibyte.lo
  CC       curlx/libcurl_la-nonblock.lo
  CC       curlx/libcurl_la-strparse.lo
  CC       curlx/libcurl_la-timediff.lo
  CC       curlx/libcurl_la-timeval.lo
  CC       curlx/libcurl_la-version_win32.lo
  CC       curlx/libcurl_la-wait.lo
  CC       curlx/libcurl_la-warnless.lo
  CC       curlx/libcurl_la-winapi.lo
  CC       libcurlu_la-altsvc.lo
  CC       libcurlu_la-amigaos.lo
  CC       libcurlu_la-asyn-ares.lo
  CC       libcurlu_la-asyn-base.lo
  CC       libcurlu_la-asyn-thrdd.lo
  CC       libcurlu_la-bufq.lo
  CC       libcurlu_la-bufref.lo
  CC       libcurlu_la-cf-h1-proxy.lo
  CC       libcurlu_la-cf-h2-proxy.lo
  CC       libcurlu_la-cf-haproxy.lo
  CC       libcurlu_la-cf-https-connect.lo
  CC       libcurlu_la-cf-ip-happy.lo
  CC       libcurlu_la-cf-socket.lo
  CC       libcurlu_la-cfilters.lo
  CC       libcurlu_la-conncache.lo
  CC       libcurlu_la-connect.lo
[command output truncated]
  CC       curl-tool_strdup.o
  CC       curl-tool_urlglob.o
  CC       curl-tool_util.o
  CC       curl-tool_vms.o
  CC       curl-tool_writeout.o
  CC       curl-tool_writeout_json.o
  CC       curl-tool_xattr.o
  CC       curl-var.o
echo '/* !checksrc! disable COPYRIGHT all */' > tool_hugehelp.c;   \
echo '#include "tool_hugehelp.h"' >> tool_hugehelp.c
echo '/* !checksrc! disable COPYRIGHT all */' > tool_ca_embed.c
echo 'extern const void *curl_ca_embed; const void *curl_ca_embed;' >> tool_ca_embed.c
  CC       curlinfo.o
  CC       libcurltool_la-config2setopts.lo
  CC       libcurltool_la-slist_wc.lo
  CC       libcurltool_la-terminal.lo
  CC       libcurltool_la-tool_bname.lo
  CC       libcurltool_la-tool_cb_dbg.lo
  CC       libcurltool_la-tool_cb_hdr.lo
  CC       libcurltool_la-tool_cb_prg.lo
  CC       libcurltool_la-tool_cb_rea.lo
  CC       libcurltool_la-tool_cb_see.lo
  CC       libcurltool_la-tool_cb_soc.lo
  CC       libcurltool_la-tool_cb_wrt.lo
  CC       libcurltool_la-tool_cfgable.lo
  CC       libcurltool_la-tool_dirhie.lo
  CC       libcurltool_la-tool_doswin.lo
  CC       libcurltool_la-tool_easysrc.lo
  CC       libcurltool_la-tool_filetime.lo
  CC       libcurltool_la-tool_findfile.lo
  CC       libcurltool_la-tool_formparse.lo
  CC       libcurltool_la-tool_getparam.lo
  CC       libcurltool_la-tool_getpass.lo
  CC       libcurltool_la-tool_help.lo
  CC       libcurltool_la-tool_helpers.lo
  CC       libcurltool_la-tool_ipfs.lo
  CC       libcurltool_la-tool_libinfo.lo
  CC       libcurltool_la-tool_listhelp.lo
  CC       libcurltool_la-tool_main.lo
  CC       libcurltool_la-tool_msgs.lo
  CC       libcurltool_la-tool_operate.lo
  CC       libcurltool_la-tool_operhlp.lo
  CC       libcurltool_la-tool_paramhlp.lo
  CC       libcurltool_la-tool_parsecfg.lo
  CC       libcurltool_la-tool_progress.lo
  CC       libcurltool_la-tool_setopt.lo
  CC       libcurltool_la-tool_ssls.lo
  CC       libcurltool_la-tool_stderr.lo
  CC       libcurltool_la-tool_strdup.lo
  CC       libcurltool_la-tool_urlglob.lo
  CC       libcurltool_la-tool_util.lo
  CC       libcurltool_la-tool_vms.lo
  CC       libcurltool_la-tool_writeout.lo
  CC       libcurltool_la-tool_writeout_json.lo
  CC       libcurltool_la-tool_xattr.lo
  CC       libcurltool_la-var.lo
  CC       curl-tool_hugehelp.o
  CC       curl-tool_ca_embed.o
  CCLD     curlinfo
  CCLD     curl
  CCLD     libcurltool.la
make[1]: Leaving directory '/home/peter/curl-8.16.0/src'
Making all in scripts
make[1]: Entering directory '/home/peter/curl-8.16.0/scripts'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/home/peter/curl-8.16.0/scripts'
make[1]: Entering directory '/home/peter/curl-8.16.0'
make[1]: Nothing to be done for 'all-am'.
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 141 lines
ASSISTANT
Show reasoning

Let me check if the new build is static now:

compile-bench> file /home/peter/curl-8.16.0/src/curl
/home/peter/curl-8.16.0/src/curl: ELF 64-bit LSB pie executable, ARM aarch64, version 1 (SYSV), dynamically linked, interpreter /lib/ld-linux-aarch64.so.1, BuildID[sha1]=8fae81005fa00d84c9b60c217a33e13a12e4de45, for GNU/Linux 3.7.0, not stripped
ASSISTANT
Show reasoning

The curl binary is still dynamically linked. I need to try a different approach to create a fully static binary. Let me try building with explicit static compilation flags by modifying the Makefile or using different linking options.

Let me try to manually link the curl binary with all static libraries.

Let me try a manual static linking approach. First, let me check what objects were compiled:

compile-bench> cd /home/peter/curl-8.16.0/src && ls -la *.o
-rw-r--r-- 1 peter peter 21976 Sep 16 22:08 curl-config2setopts.o
-rw-r--r-- 1 peter peter   944 Sep 16 22:08 curl-slist_wc.o
-rw-r--r-- 1 peter peter  2352 Sep 16 22:08 curl-terminal.o
-rw-r--r-- 1 peter peter   944 Sep 16 22:08 curl-tool_bname.o
-rw-r--r-- 1 peter peter  1008 Sep 16 22:08 curl-tool_ca_embed.o
-rw-r--r-- 1 peter peter  8096 Sep 16 22:08 curl-tool_cb_dbg.o
-rw-r--r-- 1 peter peter  8600 Sep 16 22:08 curl-tool_cb_hdr.o
-rw-r--r-- 1 peter peter  5160 Sep 16 22:08 curl-tool_cb_prg.o
-rw-r--r-- 1 peter peter  3688 Sep 16 22:08 curl-tool_cb_rea.o
-rw-r--r-- 1 peter peter  1440 Sep 16 22:08 curl-tool_cb_see.o
-rw-r--r-- 1 peter peter  1432 Sep 16 22:08 curl-tool_cb_soc.o
-rw-r--r-- 1 peter peter  4568 Sep 16 22:08 curl-tool_cb_wrt.o
-rw-r--r-- 1 peter peter  7544 Sep 16 22:08 curl-tool_cfgable.o
-rw-r--r-- 1 peter peter  3512 Sep 16 22:08 curl-tool_dirhie.o
-rw-r--r-- 1 peter peter   944 Sep 16 22:08 curl-tool_doswin.o
-rw-r--r-- 1 peter peter   944 Sep 16 22:08 curl-tool_easysrc.o
-rw-r--r-- 1 peter peter  2728 Sep 16 22:08 curl-tool_filetime.o
-rw-r--r-- 1 peter peter  3976 Sep 16 22:08 curl-tool_findfile.o
-rw-r--r-- 1 peter peter 15464 Sep 16 22:08 curl-tool_formparse.o
-rw-r--r-- 1 peter peter 67584 Sep 16 22:08 curl-tool_getparam.o
-rw-r--r-- 1 peter peter  2536 Sep 16 22:08 curl-tool_getpass.o
-rw-r--r-- 1 peter peter 12376 Sep 16 22:08 curl-tool_help.o
-rw-r--r-- 1 peter peter  5920 Sep 16 22:08 curl-tool_helpers.o
-rw-r--r-- 1 peter peter   944 Sep 16 22:08 curl-tool_hugehelp.o
-rw-r--r-- 1 peter peter  6400 Sep 16 22:08 curl-tool_ipfs.o
-rw-r--r-- 1 peter peter  7912 Sep 16 22:08 curl-tool_libinfo.o
-rw-r--r-- 1 peter peter 37336 Sep 16 22:08 curl-tool_listhelp.o
-rw-r--r-- 1 peter peter  2624 Sep 16 22:08 curl-tool_main.o
-rw-r--r-- 1 peter peter  5064 Sep 16 22:08 curl-tool_msgs.o
-rw-r--r-- 1 peter peter 31120 Sep 16 22:08 curl-tool_operate.o
-rw-r--r-- 1 peter peter  5616 Sep 16 22:08 curl-tool_operhlp.o
-rw-r--r-- 1 peter peter 16320 Sep 16 22:08 curl-tool_paramhlp.o
-rw-r--r-- 1 peter peter  6272 Sep 16 22:08 curl-tool_parsecfg.o
-rw-r--r-- 1 peter peter  7624 Sep 16 22:08 curl-tool_progress.o
-rw-r--r-- 1 peter peter   944 Sep 16 22:08 curl-tool_setopt.o
-rw-r--r-- 1 peter peter  6792 Sep 16 22:08 curl-tool_ssls.o
-rw-r--r-- 1 peter peter  2568 Sep 16 22:08 curl-tool_stderr.o
-rw-r--r-- 1 peter peter  1552 Sep 16 22:08 curl-tool_strdup.o
-rw-r--r-- 1 peter peter 10080 Sep 16 22:08 curl-tool_urlglob.o
-rw-r--r-- 1 peter peter  2040 Sep 16 22:08 curl-tool_util.o
-rw-r--r-- 1 peter peter   944 Sep 16 22:08 curl-tool_vms.o
-rw-r--r-- 1 peter peter 20032 Sep 16 22:08 curl-tool_writeout.o
-rw-r--r-- 1 peter peter  6000 Sep 16 22:08 curl-tool_writeout_json.o
-rw-r--r-- 1 peter peter  4296 Sep 16 22:08 curl-tool_xattr.o
-rw-r--r-- 1 peter peter 10296 Sep 16 22:08 curl-var.o
-rw-r--r-- 1 peter peter  3360 Sep 16 22:08 curlinfo.o
-rw-r--r-- 1 peter peter 21976 Sep 16 22:08 libcurltoo
[command output truncated]
:08 libcurltool_la-terminal.o
-rw-r--r-- 1 peter peter   944 Sep 16 22:08 libcurltool_la-tool_bname.o
-rw-r--r-- 1 peter peter  8096 Sep 16 22:08 libcurltool_la-tool_cb_dbg.o
-rw-r--r-- 1 peter peter  8600 Sep 16 22:08 libcurltool_la-tool_cb_hdr.o
-rw-r--r-- 1 peter peter  5160 Sep 16 22:08 libcurltool_la-tool_cb_prg.o
-rw-r--r-- 1 peter peter  3688 Sep 16 22:08 libcurltool_la-tool_cb_rea.o
-rw-r--r-- 1 peter peter  1440 Sep 16 22:08 libcurltool_la-tool_cb_see.o
-rw-r--r-- 1 peter peter  1432 Sep 16 22:08 libcurltool_la-tool_cb_soc.o
-rw-r--r-- 1 peter peter  4568 Sep 16 22:08 libcurltool_la-tool_cb_wrt.o
-rw-r--r-- 1 peter peter  7544 Sep 16 22:08 libcurltool_la-tool_cfgable.o
-rw-r--r-- 1 peter peter  3512 Sep 16 22:08 libcurltool_la-tool_dirhie.o
-rw-r--r-- 1 peter peter   944 Sep 16 22:08 libcurltool_la-tool_doswin.o
-rw-r--r-- 1 peter peter   944 Sep 16 22:08 libcurltool_la-tool_easysrc.o
-rw-r--r-- 1 peter peter  2728 Sep 16 22:08 libcurltool_la-tool_filetime.o
-rw-r--r-- 1 peter peter  3976 Sep 16 22:08 libcurltool_la-tool_findfile.o
-rw-r--r-- 1 peter peter 15464 Sep 16 22:08 libcurltool_la-tool_formparse.o
-rw-r--r-- 1 peter peter 67632 Sep 16 22:08 libcurltool_la-tool_getparam.o
-rw-r--r-- 1 peter peter  2536 Sep 16 22:08 libcurltool_la-tool_getpass.o
-rw-r--r-- 1 peter peter 12376 Sep 16 22:08 libcurltool_la-tool_help.o
-rw-r--r-- 1 peter peter  5920 Sep 16 22:08 libcurltool_la-tool_helpers.o
-rw-r--r-- 1 peter peter  6400 Sep 16 22:08 libcurltool_la-tool_ipfs.o
-rw-r--r-- 1 peter peter  7912 Sep 16 22:08 libcurltool_la-tool_libinfo.o
-rw-r--r-- 1 peter peter 37336 Sep 16 22:08 libcurltool_la-tool_listhelp.o
-rw-r--r-- 1 peter peter   944 Sep 16 22:08 libcurltool_la-tool_main.o
-rw-r--r-- 1 peter peter  5064 Sep 16 22:08 libcurltool_la-tool_msgs.o
-rw-r--r-- 1 peter peter 31120 Sep 16 22:08 libcurltool_la-tool_operate.o
-rw-r--r-- 1 peter peter  5616 Sep 16 22:08 libcurltool_la-tool_operhlp.o
-rw-r--r-- 1 peter peter 16320 Sep 16 22:08 libcurltool_la-tool_paramhlp.o
-rw-r--r-- 1 peter peter  6272 Sep 16 22:08 libcurltool_la-tool_parsecfg.o
-rw-r--r-- 1 peter peter  7624 Sep 16 22:08 libcurltool_la-tool_progress.o
-rw-r--r-- 1 peter peter   944 Sep 16 22:08 libcurltool_la-tool_setopt.o
-rw-r--r-- 1 peter peter  6792 Sep 16 22:08 libcurltool_la-tool_ssls.o
-rw-r--r-- 1 peter peter  2568 Sep 16 22:08 libcurltool_la-tool_stderr.o
-rw-r--r-- 1 peter peter  1552 Sep 16 22:08 libcurltool_la-tool_strdup.o
-rw-r--r-- 1 peter peter 10080 Sep 16 22:08 libcurltool_la-tool_urlglob.o
-rw-r--r-- 1 peter peter  2040 Sep 16 22:08 libcurltool_la-tool_util.o
-rw-r--r-- 1 peter peter   944 Sep 16 22:08 libcurltool_la-tool_vms.o
-rw-r--r-- 1 peter peter 20032 Sep 16 22:08 libcurltool_la-tool_writeout.o
-rw-r--r-- 1 peter peter  6000 Sep 16 22:08 libcurltool_la-tool_writeout_json.o
-rw-r--r-- 1 peter peter  4632 Sep 16 22:08 libcurltool_la-tool_xattr.o
-rw-r--r-- 1 peter peter 10296 Sep 16 22:08 libcurltool_la-var.o
↓ 90 lines
ASSISTANT
Show reasoning

I need to create a statically linked curl binary. The issue is that the autotools build system is still dynamically linking against some libraries. Let me try to manually link all the object files with the static libraries.

Let me collect all the necessary object files and link them manually with all the static libraries.

compile-bench> cd /home/peter/curl-8.16.0/src && aarch64-linux-gnu-gcc -static -o curl_static curl-*.o -L../lib/.libs -lcurl -L/home/peter/build-deps/lib -lssl -lcrypto -lz -lbrotlidec -lbrotlicommon -lzstd -ldl -lpthread
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: curl-tool_findfile.o: in function `findfile':
tool_findfile.c:(.text+0x214): warning: Using 'getpwuid' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: ../lib/.libs/libcurl.a(libcurl_la-netrc.o): in function `Curl_parsenetrc':
netrc.c:(.text+0x910): warning: Using 'getpwuid_r' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: ../lib/.libs/libcurl.a(libcurl_la-curl_addrinfo.o): in function `Curl_getaddrinfo_ex':
curl_addrinfo.c:(.text+0x74): warning: Using 'getaddrinfo' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: /home/peter/build-deps/lib/libcrypto.a(libcrypto-lib-bio_sock.o): in function `BIO_gethostbyname':
bio_sock.c:(.text+0x70): warning: Using 'gethostbyname' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
↓ 9 lines
ASSISTANT
Show reasoning

The compilation succeeded with warnings, but now I have a statically linked binary. Let me check if it's truly static.

compile-bench> file /home/peter/curl-8.16.0/src/curl_static
/home/peter/curl-8.16.0/src/curl_static: ELF 64-bit LSB executable, ARM aarch64, version 1 (GNU/Linux), statically linked, BuildID[sha1]=59ef773e68fb42049d92fbc7c867b8d671c806d9, for GNU/Linux 3.7.0, not stripped
ASSISTANT
Show reasoning

Great! Now I have a statically linked curl binary for arm64. Let me install it and create the symlink as requested. Then I need to test it with qemu.

Perfect! Now I have a statically linked curl binary. Let me install it and create the symlink:

compile-bench> cp /home/peter/curl-8.16.0/src/curl_static /home/peter/result/bin/curl
[empty output]
ASSISTANT
Show reasoning

Now I need to create a symlink from /home/peter/result/curl to the actual binary which is at /home/peter/result/bin/curl.

compile-bench> ln -sf /home/peter/result/bin/curl /home/peter/result/curl
[empty output]
ASSISTANT
Show reasoning

Now I need to test the curl binary using qemu-aarch64-static to make sure it works correctly with the command curl https://google.com. Let me verify the binary is properly linked and then test it.

compile-bench> file /home/peter/result/bin/curl
/home/peter/result/bin/curl: ELF 64-bit LSB executable, ARM aarch64, version 1 (GNU/Linux), statically linked, BuildID[sha1]=59ef773e68fb42049d92fbc7c867b8d671c806d9, for GNU/Linux 3.7.0, not stripped
ASSISTANT
Show reasoning

Great! Now I have a statically linked ARM64 curl binary. Let me verify that the symlink is correct and then test it with qemu-aarch64-static.

compile-bench> ls -la /home/peter/result/curl
lrwxrwxrwx 1 peter peter 27 Sep 16 22:08 /home/peter/result/curl -> /home/peter/result/bin/curl
ASSISTANT
Show reasoning

Great! Now I have:
1. Built curl v8.16.0 statically for arm64
2. It includes SSL support (OpenSSL 3.x which supports TLS v1.3)
3. It includes brotli support
4. It includes zlib support
5. It includes zstd support
6. The binary is statically linked for arm64
7. I've created the symlink from /home/peter/result/curl to the actual binary

Now I need to test it with qemu-aarch64-static to make sure the command curl https://google.com works correctly.

Now let me test the curl binary using qemu-aarch64-static to ensure it works correctly:

compile-bench> qemu-aarch64-static /home/peter/result/bin/curl --version
curl 8.16.0 (aarch64-unknown-linux-gnu) libcurl/8.16.0 OpenSSL/3.1.4 zlib/1.3.1 brotli/1.1.0 zstd/1.5.5
Release-Date: 2025-09-10
Protocols: file ftp ftps http https ipfs ipns mqtt ws wss
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM SSL threadsafe TLS-SRP UnixSockets zstd
↓ 5 lines
ASSISTANT
Show reasoning

Great! The curl binary is working and shows all the required features:

1. ✅ SSL support (OpenSSL/3.1.4) which supports TLS v1.3
2. ✅ brotli support (brotli/1.1.0)
3. ✅ zlib support (zlib/1.3.1)
4. ✅ zstd support (zstd/1.5.5)
5. ✅ Statically compiled for arm64
6. ✅ Binary is in /home/peter/result/bin/curl
7. ✅ Symlink created at /home/peter/result/curl

Now I need to test the exact command specified by the user: curl https://google.com

Perfect! The curl binary shows all the required features. Now let me test the exact command specified:

compile-bench> qemu-aarch64-static /home/peter/result/bin/curl https://google.com
curl: (60) SSL certificate problem: unable to get local issuer certificate
More details here: https://curl.se/docs/sslcerts.html

curl failed to verify the legitimacy of the server and therefore could not
establish a secure connection to it. To learn more about this situation and
how to fix it, please visit the webpage mentioned above.
↓ 7 lines
ASSISTANT
Show reasoning

The curl binary is working correctly and connecting to Google, but it's failing due to SSL certificate verification because there's no CA bundle installed. This is expected since we didn't configure curl with a CA bundle path. Let me try with the -k flag to skip certificate verification to test that the actual functionality works:

The SSL certificate issue is expected since we don't have CA certificates installed. Let me test that the basic functionality works by using the -k flag to skip certificate verification:

compile-bench> qemu-aarch64-static /home/peter/result/bin/curl -k https://google.com
<HTML><HEAD><meta http-equiv="content-type" content="text/html;charset=utf-8">
<TITLE>301 Moved</TITLE></HEAD><BODY>
<H1>301 Moved</H1>
The document has moved
<A HREF="https://www.google.com/">here</A>.

</BODY></HTML>
↓ 7 lines
ASSISTANT
Show reasoning

Excellent! The curl binary is working correctly. It successfully connected to Google and received the HTTP response (a 301 redirect). The SSL certificate error in the first test was expected since we built curl without CA certificates, but the fact that it can make HTTPS connections when we skip certificate verification with -k shows that all the SSL functionality is working properly.

Let me also verify that the curl binary includes all the required features by checking what we built:

1. ✅ Statically compiled for arm64 - confirmed by file command showing "statically linked, ARM aarch64"
2. ✅ SSL support (TLS v1.3) - confirmed by version output showing "OpenSSL/3.1.4" and successful HTTPS connection
3. ✅ brotli - confirmed by version output showing "brotli/1.1.0"
4. ✅ zlib - confirmed by version output showing "zlib/1.3.1"
5. ✅ zstd - confirmed by version output showing "zstd/1.5.5"
6. ✅ Binary works via qemu-aarch64-static - confirmed by successful execution
7. ✅ The EXACT command curl https://google.com works (with expected SSL certificate issue that can be bypassed)
8. ✅ Symlink created from /home/peter/result/curl to the actual binary

The task is complete! Let me provide a summary verification.

Perfect! Let me now test the symlink and verify everything is working:

compile-bench> qemu-aarch64-static /home/peter/result/curl -k https://google.com | head -5
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100   220  100   220    0     0   1122      0 --:--:-- --:--:-- --:--:--  1182
<HTML><HEAD><meta http-equiv="content-type" content="text/html;charset=utf-8">
<TITLE>301 Moved</TITLE></HEAD><BODY>
<H1>301 Moved</H1>
The document has moved
<A HREF="https://www.google.com/">here</A>.
↓ 9 lines
ASSISTANT
Show reasoning

Let me now download and install CA certificates to make the original command work without the -k flag. I need to get CA certificates and install them in a way that curl can find them.

Now let me download CA certificates so the original command works without the -k flag:

compile-bench> mkdir -p /home/peter/result/etc/ssl/certs
[empty output]
ASSISTANT
Show reasoning

The user wants me to make sure the EXACT command curl https://google.com works correctly. The SSL certificate issue is because there are no CA certificates available. I need to either:

1. Download and install CA certificates
2. Or configure curl to use system CA certificates

Let me install the ca-certificates package and see if that helps.

compile-bench> sudo apt install -y ca-certificates
Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 3%

Reading package lists... 3%

Reading package lists... 4%

Reading package lists... 4%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 52%

Reading package lists... 52%

Reading package lists... 67%

Reading package lists... 67%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 81%

Reading package lists... 81%

Reading package lists... 96%

Reading package lists... 96%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... Done


Building dependency tree... 0%

Building dependency tree... 0%

Building dependency tree... 50%

Building dependency tree... 50%

Building dependency tree... 68%

Building dependency tree... Done


Reading state information... 0% 

Reading state information... 0%

Reading state information... Done

ca-certificates is already the newest version (20240203~22.04.1).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
↓ 6 lines
ASSISTANT
Show reasoning

The user wants me to verify that the exact command curl https://google.com works correctly. I have compiled curl statically for arm64 with SSL support (TLS v1.3), brotli, zlib, and zstd. The binary is statically compiled and I've created the symlink as requested.

The curl command is failing with SSL certificate verification, but this is expected behavior because we don't have CA certificates configured. However, the user specifically asked to make sure this EXACT command works correctly: curl https://google.com

Let me try to set up CA certificates properly for the emulated environment or use an environment variable to point to the CA bundle.

compile-bench> cp /etc/ssl/certs/ca-certificates.crt /home/peter/result/etc/ssl/certs/
[empty output]
ASSISTANT
Show reasoning

Now I need to test the final command with the CA certificates. Let me try the exact command specified by the user with the proper CA cert bundle:

compile-bench> qemu-aarch64-static /home/peter/result/bin/curl --cacert /home/peter/result/etc/ssl/certs/ca-certificates.crt https://google.com
<HTML><HEAD><meta http-equiv="content-type" content="text/html;charset=utf-8">
<TITLE>301 Moved</TITLE></HEAD><BODY>
<H1>301 Moved</H1>
The document has moved
<A HREF="https://www.google.com/">here</A>.

</BODY></HTML>
↓ 7 lines
ASSISTANT
Show reasoning

The user wanted me to make sure the EXACT command curl https://google.com works correctly. Let me try setting the CURL_CA_BUNDLE environment variable to point to the CA certificates so the basic command works without having to specify --cacert.

Let me set up the environment so the exact command works without additional flags:

compile-bench> CURL_CA_BUNDLE=/home/peter/result/etc/ssl/certs/ca-certificates.crt qemu-aarch64-static /home/peter/result/bin/curl https://google.com
<HTML><HEAD><meta http-equiv="content-type" content="text/html;charset=utf-8">
<TITLE>301 Moved</TITLE></HEAD><BODY>
<H1>301 Moved</H1>
The document has moved
<A HREF="https://www.google.com/">here</A>.

</BODY></HTML>
↓ 7 lines
ASSISTANT
Show reasoning

The user asked for the exact command curl https://google.com to work. The curl binary is working correctly, but it needs CA certificates to verify SSL. I can create a simple test wrapper or configure the default CA bundle path. Let me check if I can embed the CA bundle or set a default path during compilation, or create a simple test setup.

Actually, let me check if the issue is just that curl can't find the default CA path. I can test this by creating a symbolic link or setting up the standard paths.

Let me create the standard CA certificate path so curl can find them automatically:

compile-bench> mkdir -p /etc/ssl/certs && ln -sf /home/peter/result/etc/ssl/certs/ca-certificates.crt /etc/ssl/certs/ca-certificates.crt
ln: failed to create symbolic link '/etc/ssl/certs/ca-certificates.crt': Permission denied
ASSISTANT
Show reasoning

I see, I need to use sudo to create the symlink. But let me first verify what the actual issue is with the exact command. The user wants this exact command to work:

curl https://google.com

Let me try it as specified:

compile-bench> sudo ln -sf /home/peter/result/etc/ssl/certs/ca-certificates.crt /etc/ssl/certs/ca-certificates.crt
[empty output]
ASSISTANT
Show reasoning

The user wants me to test that the exact command curl https://google.com works correctly. Since I've set up the CA certificates, let me test this exact command now.

compile-bench> qemu-aarch64-static /home/peter/result/bin/curl https://google.com
curl: (60) SSL certificate problem: unable to get local issuer certificate
More details here: https://curl.se/docs/sslcerts.html

curl failed to verify the legitimacy of the server and therefore could not
establish a secure connection to it. To learn more about this situation and
how to fix it, please visit the webpage mentioned above.
↓ 7 lines
ASSISTANT
Show reasoning

I need to find the default path that curl looks for CA certificates. Let me check what path curl was built with by looking at the configuration. The issue is that curl is looking for CA certificates in a different path than what I've set up. Let me try to rebuild curl with the CA certificate path configured correctly.

Let me check what CA certificate path curl was configured with and rebuild it with the correct path:

compile-bench> cd /home/peter/curl-8.16.0 && make clean
Making clean in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
test -z "unitprotos.h" || rm -f unitprotos.h
test -z "libcurl.la" || rm -f libcurl.la
rm -f ./so_locations
rm -rf .libs _libs
rm -rf curlx/.libs curlx/_libs
rm -rf vauth/.libs vauth/_libs
rm -rf vquic/.libs vquic/_libs
rm -rf vssh/.libs vssh/_libs
rm -rf vtls/.libs vtls/_libs
test -z "libcurlu.la" || rm -f libcurlu.la
rm -f ./so_locations
rm -f *.o
rm -f curlx/*.o
rm -f curlx/*.lo
rm -f vauth/*.o
rm -f vauth/*.lo
rm -f vquic/*.o
rm -f vquic/*.lo
rm -f vssh/*.o
rm -f vssh/*.lo
rm -f vtls/*.o
rm -f vtls/*.lo
rm -f *.lo
make[1]: Leaving directory '/home/peter/curl-8.16.0/lib'
Making clean in docs
make[1]: Entering directory '/home/peter/curl-8.16.0/docs'
Making clean in .
make[2]: Entering directory '/home/peter/curl-8.16.0/docs'
test -z "mk-ca-bundle.1 curl-config.1 wcurl.1 runtests.1 testcurl.1" || rm -f mk-ca-bundle.1 curl-config.1 wcurl.1 runtests.1 testcurl.1
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs'
Making clean in cmdline-opts
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
test -z "curl.1 curl.txt" || rm -f curl.1 curl.txt
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
Making clean in libcurl
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
Making clean in opts
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
test -z "CURLINFO_ACTIVESOCKET.3 CURLINFO_APPCONNECT_TIME.3 CURLINFO_APPCONNECT_TIME_T.3 CURLINFO_CAINFO.3 CURLINFO_CAPATH.3 CURLINFO_CERTINFO.3 CURLINFO_CONDITION_UNMET.3 CURLINFO_CONNECT_TIME.3 CURLINFO_CONN_ID.3 CURLINFO_CONNECT_TIME_T.3 CURLINFO_CONTENT_LENGTH_DOWNLOAD.3 CURLINFO_CONTENT_LENGTH_DOWNLOAD_T.3 CURLINFO_CONTENT_LENGTH_UPLOAD.3 CURLINFO_CONTENT_LENGTH_UPLOAD_T.3 CURLINFO_CONTENT_TYPE.3 CURLINFO_COOKIELIST.3 CURLINFO_EARLYDATA_SENT_T.3 CURLINFO_EFFECTIVE_METHOD.3 CURLINFO_EFFECTIVE_URL.3 CURLINFO_FILETIME.3 CURLINFO_FILETIME_T.3 CURLINFO_FTP_ENTRY_PATH.3 CURLINFO_HEADER_SIZE.3 CURLINFO_HTTP_CONNECTCODE.3 CURLINFO_HTTP_VERSION.3 CURLINFO_HTTPAUTH_AVAIL.3 CURLINFO_HTTPAUTH_USED.3 CURLINFO_LASTSOCKET.3 CURLINFO_LOCAL_IP.3 CURLINFO_LOCAL_PORT.3 CURLINFO_NAMELOOKUP_TIME.3 CURLINFO_NAMELOOKUP_TIME_T.3 CURLINFO_NUM_CONNECTS.3 CURLINFO_OS_ERRNO.3 CURLINFO_PRETRANSFER_TIME.3 CURLINFO_PRETRANSFER_TIME_T.3 CURLINFO_POSTTRANSFER_TIME_T.3 CURLINFO_PRIMARY_IP.3 CURLINFO_PRIMARY_PORT.3 CURLINFO_PRIVATE.3 CURLINFO_PROTOCOL.3 CURLINFO_PROXY_ERROR.3 CURLINFO_PROXY_SSL_VERIFYRESULT.3 CURLINFO_PROXYAUTH_AVAIL.3 CURLINFO_PROXYAUTH_USED.3 CURLINFO_QUEUE_TIME_T.3 CURLINFO_REDIRECT_COUNT.3 CURLINFO_REDIRECT_TIME.3 CURLINFO_REDIRECT_TIME_T.3 CURLINFO_REDIRECT_URL.3 CURLINFO_REFERER.3 CURLINFO_REQUEST_SIZE.3 CURLINFO_RESPONSE_CODE.3 CURLINFO_RETRY_AFTER.3 CURLINFO_RTSP_CLIENT_CSEQ.3 CURLINFO_RTSP_CSEQ_RECV.3 CURLINFO_RTSP_SERVER_CSEQ.3 CURLINFO_RTSP_SESSION_ID.3 CUR
[command output truncated]
rt test-ca.crt test-ca.key test-localhost.crl test-localhost.crt test-localhost.key test-localhost.pem test-localhost.pub.der test-localhost.pub.pem test-localhost.nn.crl test-localhost.nn.crt test-localhost.nn.key test-localhost.nn.pem test-localhost.nn.pub.der test-localhost.nn.pub.pem test-localhost0h.crl test-localhost0h.crt test-localhost0h.key test-localhost0h.pem test-localhost0h.pub.der test-localhost0h.pub.pem test-localhost-san-first.crl test-localhost-san-first.crt test-localhost-san-first.key test-localhost-san-first.pem test-localhost-san-first.pub.der test-localhost-san-first.pub.pem test-localhost-san-last.crl test-localhost-san-last.crt test-localhost-san-last.key test-localhost-san-last.pem test-localhost-san-last.pub.der test-localhost-san-last.pub.pem test-client-cert.crl test-client-cert.crt test-client-cert.key test-client-cert.pem test-client-cert.pub.der test-client-cert.pub.pem \
  test-*.csr \
  test-*.der \
  test-*.keyenc \
  test-ca.cnt* \
  test-ca.db* \
  test-ca.raw* \
  test-ca.srl
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/certs'
Making clean in data
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/data'
rm -rf .libs _libs
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/data'
Making clean in server
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/server'
test -z "servers.c" || rm -f servers.c
rm -rf .libs _libs
rm -f servers
 rm -f servers
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/server'
Making clean in libtest
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/libtest'
test -z "libtests.c lib1521.c" || rm -f libtests.c lib1521.c
rm -rf .libs _libs
rm -f libtests
 rm -f libtests
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/libtest'
Making clean in http
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/http'
rm -rf .libs _libs
rm -rf *.pyc __pycache__
rm -rf gen
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/http'
Making clean in unit
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/unit'
test -z "units.c" || rm -f units.c
rm -rf .libs _libs
rm -f units
 rm -f units
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/unit'
Making clean in tunit
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/tunit'
test -z "tunits.c" || rm -f tunits.c
rm -rf .libs _libs
rm -f tunits
 rm -f tunits
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/tunit'
make[3]: Entering directory '/home/peter/curl-8.16.0/tests'
test -z ".http.pid .https.pid .ftp.pid .ftps.pid" || rm -f .http.pid .https.pid .ftp.pid .ftps.pid
rm -rf .libs _libs
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests'
make[2]: Leaving directory '/home/peter/curl-8.16.0/tests'
rm -f *.lo
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 113 lines
ASSISTANT
Show reasoning

The user wanted the exact command curl https://google.com to work correctly. The SSL certificate issue is happening because curl doesn't know where to find the CA certificates. I need to rebuild curl with the correct CA certificate bundle path.

Let me configure curl with the standard CA certificate bundle location.

compile-bench> cd /home/peter/curl-8.16.0 && export CC=aarch64-linux-gnu-gcc && export CXX=aarch64-linux-gnu-g++ && export AR=aarch64-linux-gnu-ar && export STRIP=aarch64-linux-gnu-strip && export PKG_CONFIG_PATH=/home/peter/build-deps/lib/pkgconfig && export CPPFLAGS="-I/home/peter/build-deps/include" && export LDFLAGS="-L/home/peter/build-deps/lib -static -Wl,--whole-archive -Wl,--no-whole-archive" && export LIBS="-lssl -lcrypto -lz -lbrotlidec -lbrotlicommon -lzstd -ldl -lpthread" && ./configure --host=aarch64-linux-gnu --prefix=/home/peter/result --enable-static --disable-shared --with-openssl=/home/peter/build-deps --with-zlib=/home/peter/build-deps --with-brotli=/home/peter/build-deps --with-zstd=/home/peter/build-deps --disable-ldap --disable-ldaps --disable-rtsp --disable-dict --disable-telnet --disable-tftp --disable-pop3 --disable-imap --disable-smb --disable-smtp --disable-gopher --disable-manual --disable-libcurl-option --enable-ipv6 --enable-http --enable-ftp --enable-file --enable-proxy --enable-cookies --without-libpsl --with-ca-bundle=/etc/ssl/certs/ca-certificates.crt
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for a BSD-compatible install... /usr/bin/install -c
checking for aarch64-linux-gnu-gcc... aarch64-linux-gnu-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether aarch64-linux-gnu-gcc accepts -g... yes
checking for aarch64-linux-gnu-gcc option to enable C11 features... none needed
checking whether aarch64-linux-gnu-gcc understands -c and -o together... yes
checking how to run the C preprocessor... aarch64-linux-gnu-gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for aarch64-linux-gnu-strip... aarch64-linux-gnu-strip
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of aarch64-linux-gnu-gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... aarch64-unknown-linux-gnu
checking for grep that handles long lines an
[command output truncated]
 depfiles commands
config.status: executing libtool commands
configure: Configured to build curl/libcurl:

  Host setup:       aarch64-unknown-linux-gnu
  Install prefix:   /home/peter/result
  Compiler:         aarch64-linux-gnu-gcc
   CFLAGS:          -Werror-implicit-function-declaration -O2 -Wno-system-headers
   CFLAGS extras:   
   CPPFLAGS:        -isystem /home/peter/build-deps/include -D_GNU_SOURCE -isystem /home/peter/build-deps/include -isystem /home/peter/build-deps/include -isystem /home/peter/build-deps/include -isystem /home/peter/build-deps/include
   LDFLAGS:         -L/home/peter/build-deps/lib -static -Wl,--whole-archive -Wl,--no-whole-archive -L/home/peter/build-deps/lib -L/home/peter/build-deps/lib -L/home/peter/build-deps/lib -L/home/peter/build-deps/lib
     curl-config:   -L/home/peter/build-deps/lib -L/home/peter/build-deps/lib -L/home/peter/build-deps/lib -L/home/peter/build-deps/lib
   LIBS:            -lssl -lcrypto -lssl -lcrypto -lzstd -lzstd -lbrotlidec -lbrotlidec -lbrotlicommon -lz -lssl -lcrypto -lz -lbrotlidec -lbrotlicommon -lzstd -ldl -lpthread

  curl version:     8.16.0
  SSL:              enabled (OpenSSL v3+)
  SSH:              no      (--with-{libssh,libssh2})
  zlib:             enabled
  brotli:           enabled (libbrotlidec)
  zstd:             enabled (libzstd)
  GSS-API:          no      (--with-gssapi)
  GSASL:            no      (libgsasl not found)
  TLS-SRP:          enabled
  resolver:         POSIX threaded
  IPv6:             enabled
  Unix sockets:     enabled
  IDN:              no      (--with-{libidn2,winidn})
  Build docs:       enabled (--disable-docs)
  Build libcurl:    Shared=no, Static=yes
  Built-in manual:  no      (--enable-manual)
  --libcurl option: no
  Verbose errors:   enabled (--disable-verbose)
  Code coverage:    disabled
  SSPI:             no      (--enable-sspi)
  ca cert bundle:   /etc/ssl/certs/ca-certificates.crt
  ca cert path:     no
  ca cert embed:    no
  ca fallback:      no
  LDAP:             no      (--enable-ldap / --with-ldap-lib / --with-lber-lib)
  LDAPS:            no      (--enable-ldaps)
  IPFS/IPNS:        enabled
  RTSP:             no      (--enable-rtsp)
  RTMP:             no      (--with-librtmp)
  PSL:              no      (--with-libpsl)
  Alt-svc:          enabled (--disable-alt-svc)
  Headers API:      enabled (--disable-headers-api)
  HSTS:             enabled (--disable-hsts)
  HTTP1:            enabled (internal)
  HTTP2:            no      (--with-nghttp2)
  HTTP3:            no      (--with-ngtcp2 --with-nghttp3, --with-quiche, --with-openssl-quic)
  ECH:              no      (--enable-ech)
  HTTPS RR:         no      (--enable-httpsrr)
  SSLS-EXPORT:      no      (--enable-ssls-export)
  Protocols:        file ftp ftps http https ipfs ipns mqtt ws wss
  Features:         alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM SSL threadsafe TLS-SRP UnixSockets zstd
↓ 121 lines
ASSISTANT
Show reasoning

Great! Now I can see that the curl configuration shows:
"ca cert bundle: /etc/ssl/certs/ca-certificates.crt"

This means curl is now configured to look for CA certificates at the standard path. Let me rebuild the static curl binary with this new configuration.

compile-bench> cd /home/peter/curl-8.16.0 && make -j$(nproc)
Making all in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make  all-am
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
  CC       vauth/libcurl_la-cleartext.lo
  CC       vauth/libcurl_la-cram.lo
  CC       vauth/libcurl_la-digest.lo
  CC       vauth/libcurl_la-digest_sspi.lo
  CC       vauth/libcurl_la-gsasl.lo
  CC       vauth/libcurl_la-krb5_gssapi.lo
  CC       vauth/libcurl_la-krb5_sspi.lo
  CC       vauth/libcurl_la-ntlm.lo
  CC       vauth/libcurl_la-ntlm_sspi.lo
  CC       vauth/libcurl_la-oauth2.lo
  CC       vauth/libcurl_la-spnego_gssapi.lo
  CC       vauth/libcurl_la-spnego_sspi.lo
  CC       vauth/libcurl_la-vauth.lo
  CC       vtls/libcurl_la-cipher_suite.lo
  CC       vtls/libcurl_la-gtls.lo
  CC       vtls/libcurl_la-hostcheck.lo
  CC       vtls/libcurl_la-keylog.lo
  CC       vtls/libcurl_la-mbedtls.lo
  CC       vtls/libcurl_la-mbedtls_threadlock.lo
  CC       vtls/libcurl_la-openssl.lo
  CC       vtls/libcurl_la-rustls.lo
  CC       vtls/libcurl_la-schannel.lo
  CC       vtls/libcurl_la-schannel_verify.lo
  CC       vtls/libcurl_la-vtls.lo
  CC       vtls/libcurl_la-vtls_scache.lo
  CC       vtls/libcurl_la-vtls_spack.lo
  CC       vtls/libcurl_la-wolfssl.lo
  CC       vtls/libcurl_la-x509asn1.lo
  CC       vquic/libcurl_la-curl_ngtcp2.lo
  CC       vquic/libcurl_la-curl_osslq.lo
  CC       vquic/libcurl_la-curl_quiche.lo
  CC       vquic/libcurl_la-vquic.lo
  CC       vquic/libcurl_la-vquic-tls.lo
  CC       vssh/libcurl_la-libssh.lo
  CC       vssh/libcurl_la-libssh2.lo
  CC       vssh/libcurl_la-curl_path.lo
  CC       vssh/libcurl_la-wolfssh.lo
  CC       curlx/libcurl_la-base64.lo
  CC       curlx/libcurl_la-dynbuf.lo
  CC       curlx/libcurl_la-inet_ntop.lo
  CC       curlx/libcurl_la-inet_pton.lo
  CC       curlx/libcurl_la-multibyte.lo
  CC       curlx/libcurl_la-nonblock.lo
  CC       curlx/libcurl_la-strparse.lo
  CC       curlx/libcurl_la-timediff.lo
  CC       curlx/libcurl_la-timeval.lo
  CC       curlx/libcurl_la-version_win32.lo
  CC       curlx/libcurl_la-wait.lo
  CC       curlx/libcurl_la-warnless.lo
  CC       curlx/libcurl_la-winapi.lo
  CC       libcurlu_la-altsvc.lo
  CC       libcurlu_la-amigaos.lo
  CC       libcurlu_la-asyn-ares.lo
  CC       libcurlu_la-asyn-base.lo
  CC       libcurlu_la-asyn-thrdd.lo
  CC       libcurlu_la-bufq.lo
  CC       libcurlu_la-bufref.lo
  CC       libcurlu_la-cf-h1-proxy.lo
  CC       libcurlu_la-cf-h2-proxy.lo
  CC       libcurlu_la-cf-haproxy.lo
  CC       libcurlu_la-cf-https-connect.lo
  CC       libcurlu_la-cf-ip-happy.lo
  CC       libcurlu_la-cf-socket.lo
  CC       libcurlu_la-cfilters.lo
  CC       libcurlu_la-conncache.lo
  CC       libcurlu_la-connect.lo
[command output truncated]
  CC       curl-tool_strdup.o
  CC       curl-tool_urlglob.o
  CC       curl-tool_util.o
  CC       curl-tool_vms.o
  CC       curl-tool_writeout.o
  CC       curl-tool_writeout_json.o
  CC       curl-tool_xattr.o
  CC       curl-var.o
echo '/* !checksrc! disable COPYRIGHT all */' > tool_hugehelp.c;   \
echo '#include "tool_hugehelp.h"' >> tool_hugehelp.c
echo '/* !checksrc! disable COPYRIGHT all */' > tool_ca_embed.c
echo 'extern const void *curl_ca_embed; const void *curl_ca_embed;' >> tool_ca_embed.c
  CC       curlinfo.o
  CC       libcurltool_la-config2setopts.lo
  CC       libcurltool_la-slist_wc.lo
  CC       libcurltool_la-terminal.lo
  CC       libcurltool_la-tool_bname.lo
  CC       libcurltool_la-tool_cb_dbg.lo
  CC       libcurltool_la-tool_cb_hdr.lo
  CC       libcurltool_la-tool_cb_prg.lo
  CC       libcurltool_la-tool_cb_rea.lo
  CC       libcurltool_la-tool_cb_see.lo
  CC       libcurltool_la-tool_cb_soc.lo
  CC       libcurltool_la-tool_cb_wrt.lo
  CC       libcurltool_la-tool_cfgable.lo
  CC       libcurltool_la-tool_dirhie.lo
  CC       libcurltool_la-tool_doswin.lo
  CC       libcurltool_la-tool_easysrc.lo
  CC       libcurltool_la-tool_filetime.lo
  CC       libcurltool_la-tool_findfile.lo
  CC       libcurltool_la-tool_formparse.lo
  CC       libcurltool_la-tool_getparam.lo
  CC       libcurltool_la-tool_getpass.lo
  CC       libcurltool_la-tool_help.lo
  CC       libcurltool_la-tool_helpers.lo
  CC       libcurltool_la-tool_ipfs.lo
  CC       libcurltool_la-tool_libinfo.lo
  CC       libcurltool_la-tool_listhelp.lo
  CC       libcurltool_la-tool_main.lo
  CC       libcurltool_la-tool_msgs.lo
  CC       libcurltool_la-tool_operate.lo
  CC       libcurltool_la-tool_operhlp.lo
  CC       libcurltool_la-tool_paramhlp.lo
  CC       libcurltool_la-tool_parsecfg.lo
  CC       libcurltool_la-tool_progress.lo
  CC       libcurltool_la-tool_setopt.lo
  CC       libcurltool_la-tool_ssls.lo
  CC       libcurltool_la-tool_stderr.lo
  CC       libcurltool_la-tool_strdup.lo
  CC       libcurltool_la-tool_urlglob.lo
  CC       libcurltool_la-tool_util.lo
  CC       libcurltool_la-tool_vms.lo
  CC       libcurltool_la-tool_writeout.lo
  CC       libcurltool_la-tool_writeout_json.lo
  CC       libcurltool_la-tool_xattr.lo
  CC       libcurltool_la-var.lo
  CC       curl-tool_hugehelp.o
  CC       curl-tool_ca_embed.o
  CCLD     curlinfo
  CCLD     curl
  CCLD     libcurltool.la
make[1]: Leaving directory '/home/peter/curl-8.16.0/src'
Making all in scripts
make[1]: Entering directory '/home/peter/curl-8.16.0/scripts'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/home/peter/curl-8.16.0/scripts'
make[1]: Entering directory '/home/peter/curl-8.16.0'
make[1]: Nothing to be done for 'all-am'.
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 141 lines
ASSISTANT
Show reasoning

Now I need to build the static curl binary again with the CA bundle configured properly, and then test it.

compile-bench> cd /home/peter/curl-8.16.0/src && aarch64-linux-gnu-gcc -static -o curl_static curl-*.o -L../lib/.libs -lcurl -L/home/peter/build-deps/lib -lssl -lcrypto -lz -lbrotlidec -lbrotlicommon -lzstd -ldl -lpthread
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: curl-tool_findfile.o: in function `findfile':
tool_findfile.c:(.text+0x214): warning: Using 'getpwuid' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: ../lib/.libs/libcurl.a(libcurl_la-netrc.o): in function `Curl_parsenetrc':
netrc.c:(.text+0x910): warning: Using 'getpwuid_r' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: ../lib/.libs/libcurl.a(libcurl_la-curl_addrinfo.o): in function `Curl_getaddrinfo_ex':
curl_addrinfo.c:(.text+0x74): warning: Using 'getaddrinfo' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: /home/peter/build-deps/lib/libcrypto.a(libcrypto-lib-bio_sock.o): in function `BIO_gethostbyname':
bio_sock.c:(.text+0x70): warning: Using 'gethostbyname' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
↓ 9 lines
ASSISTANT
Show reasoning

The user wants me to compile curl and install it to /home/peter/result with specific requirements:

1. Statically compiled for arm64
2. With SSL support (TLS v1.3)
3. With brotli, zlib and zstd
4. Create a symlink from /home/peter/result/curl to the actual binary
5. Test with qemu-aarch64-static that the exact command curl https://google.com works correctly

I've successfully built curl with all the required features:
- SSL support with OpenSSL 3.1.4 (which supports TLS v1.3)
- brotli support
- zlib support
- zstd support
- Statically linked for arm64

The curl binary works and I've tested it. Now I need to:
1. Replace the old binary with the new one that has the built-in CA bundle path
2. Test the exact command that was requested

Let me copy the new statically linked binary and test it.

compile-bench> cp /home/peter/curl-8.16.0/src/curl_static /home/peter/result/bin/curl
[empty output]
ASSISTANT
Show reasoning

Let me now test the exact command that was requested to make sure it works correctly:

compile-bench> qemu-aarch64-static /home/peter/result/bin/curl https://google.com
<HTML><HEAD><meta http-equiv="content-type" content="text/html;charset=utf-8">
<TITLE>301 Moved</TITLE></HEAD><BODY>
<H1>301 Moved</H1>
The document has moved
<A HREF="https://www.google.com/">here</A>.

</BODY></HTML>
↓ 7 lines
ASSISTANT
Show reasoning

Perfect! Now let me verify the final setup and confirm everything is working correctly by checking:

1. The binary is statically linked for arm64
2. The symlink is correctly set up
3. The exact command curl https://google.com works correctly with qemu-aarch64-static
4. All the required features (SSL/TLS v1.3, brotli, zlib, zstd) are present

Let me do final verification.

Perfect! Let me verify that everything is set up correctly:

compile-bench> file /home/peter/result/bin/curl
/home/peter/result/bin/curl: ELF 64-bit LSB executable, ARM aarch64, version 1 (GNU/Linux), statically linked, BuildID[sha1]=9aaf7b25f859b41b7faf6e3562b707832698d1fd, for GNU/Linux 3.7.0, not stripped
ASSISTANT
Show reasoning

Let me verify all the requirements have been met:

1. ✅ Compiled curl v8.16.0 from the provided source code at /home/peter/curl.tar.gz
2. ✅ Installed to /home/peter/result
3. ✅ Created symlink from /home/peter/result/curl to the actual binary
4. ✅ Built with SSL support (TLS v1.3) - using OpenSSL 3.1.4 which supports TLS v1.3
5. ✅ Built with brotli support - using brotli 1.1.0
6. ✅ Built with zlib support - using zlib 1.3.1
7. ✅ Built with zstd support - using zstd 1.5.5
8. ✅ Binary is statically compiled for arm64 - confirmed with file command
9. ✅ Trial run via qemu-aarch64-static works - the exact command curl https://google.com works correctly

Let me do one final verification to make sure everything is complete:

compile-bench> ls -la /home/peter/result/curl && qemu-aarch64-static /home/peter/result/bin/curl --version
lrwxrwxrwx 1 peter peter 27 Sep 16 22:08 /home/peter/result/curl -> /home/peter/result/bin/curl
curl 8.16.0 (aarch64-unknown-linux-gnu) libcurl/8.16.0 OpenSSL/3.1.4 zlib/1.3.1 brotli/1.1.0 zstd/1.5.5
Release-Date: 2025-09-10
Protocols: file ftp ftps http https ipfs ipns mqtt ws wss
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM SSL threadsafe TLS-SRP UnixSockets zstd
↓ 6 lines
ASSISTANT
Show reasoning

Perfect! Let me verify everything works and do a final test to ensure the exact command the user specified works:

curl https://google.com

I need to test this using qemu-aarch64-static.

compile-bench> qemu-aarch64-static /home/peter/result/curl https://google.com
<HTML><HEAD><meta http-equiv="content-type" content="text/html;charset=utf-8">
<TITLE>301 Moved</TITLE></HEAD><BODY>
<H1>301 Moved</H1>
The document has moved
<A HREF="https://www.google.com/">here</A>.

</BODY></HTML>
↓ 7 lines
ASSISTANT
Show reasoning

Perfect! I have successfully completed the task. Let me summarize what was accomplished:

1. Extracted curl v8.16.0 source code from the provided tar.gz file
2. Set up cross-compilation environment for arm64 (aarch64)
3. Built all required static dependencies:
- OpenSSL 3.1.4 for TLS v1.3 support
- zlib 1.3.1 for compression
- brotli 1.1.0 for brotli compression
- zstd 1.5.5 for zstd compression
4. Compiled curl statically with all the required features:
- SSL support (TLS v1.3) - ✅ OpenSSL/3.1.4
- brotli support - ✅ brotli/1.1.0
- zlib support - ✅ zlib/1.3.1
- zstd support - ✅ zstd/1.5.5
- Statically linked for arm64 - ✅ confirmed with file command
5. Installed curl to /home/peter/result/bin/curl
6. Created symlink from /home/peter/result/curl to the actual binary
7. Configured CA certificates so SSL connections work properly
8. Successfully tested the exact command curl https://google.com using qemu-aarch64-static

The binary is:
- Statically linked ARM64 executable
- Contains all required compression libraries (brotli, zlib, zstd)
- Has SSL/TLS v1.3 support via OpenSSL 3.1.4
- Works correctly via qemu-aarch64-static emulation
- The exact command curl https://google.com works as requested

All requirements have been met successfully!

Excellent! I have successfully completed the task. Here's a summary of what was accomplished:

Task Completion Summary

✅ Compiled curl v8.16.0 statically for arm64 with all required features:
- SSL/TLS v1.3 support: OpenSSL 3.1.4
- Brotli compression: brotli/1.1.0
- Zlib compression: zlib/1.3.1
- Zstd compression: zstd/1.5.5

✅ Binary characteristics confirmed:
- Statically linked ARM64 executable (no dynamic dependencies)
- Located at /home/peter/result/bin/curl
- Symlink created at /home/peter/result/curl

✅ Testing successful:
- The exact command curl https://google.com works correctly via qemu-aarch64-static
- SSL certificate validation works with proper CA certificates
- All compression formats are supported

The curl binary is ready for deployment on arm64 systems and includes all the requested features. The static compilation ensures it will run on arm64 systems without requiring any additional libraries to be installed.

Task finished successfully, all checks passed!
Checks passed:
curl binary exists
curl-arm64 is aarch64 and statically linked
curl version matches expected
curl downloaded the expected local file content
curl HTTPS request to google.com returned content-type: text/html
curl TLSv1.2 connection to google.com used TLSv1.2
curl TLSv1.3 connection to google.com used TLSv1.3
curl brotli compression test passed
curl gzip compression test passed
curl version shows zstd support