<- Ranking
Summary
Task
curl-ssl-arm64-static2
Model
claude-sonnet-4.5-thinking-16k logo
claude-sonnet-4.5-thinking-16k
Status
Success
Performance
Cost$1.513
Total elapsed time8m35s
LLM inference time4m56s
Command execution time3m39s
Commands executed68
All details >
Attempt ID 4d5at2gsc419p Attempt group run-29-09-25-19-32
Revision 0cfc533b3f68 AWS Instance m8i.2xlarge
Start time 2025-09-29T18:16:36.402Z End time 2025-09-29T18:25:16.118Z
Task curl-ssl-arm64-static2 Environment ubuntu-22.04-amd64-cross-arm64
Model claude-sonnet-4.5-thinking-16k logo claude-sonnet-4.5-thinking-16k OpenRouter slug anthropic/claude-sonnet-4.5
Temperature 1 Explicit prompt caching true
User msg after tool call true Max tool calls 150
Total timeout seconds 3600 Single command timeout 1800
Cost $1.513 Duration 8m35s
LLM inference time 4m56s Command execution time 3m39s
Final context tokens 78,741 Total output tokens 12,881
Output reasoning tokens 4,192 Messages 139
Assistant messages 69 User messages 1
System messages 1 Commands executed 68
Download full attempt result JSON
Task
Task: curl-ssl-arm64-static2

curl 8.16.0 is a command-line HTTP client.
Project link: curl.se

Task:
Compile and install curl to a specific location. Build with SSL support (TLS v1.3), brotli, zlib and zstd. Cross-compile to arm64. Link it statically. This is a variant of curl-ssl-arm64-static, with a hint to do a trial run of compiled binary.

Difficulties:
Cross-compilation toolchain setup, manually cross-compiling all dependencies, properly configuring SSL certificates in OpenSSL.

Environment:
Ubuntu 22.04 on amd64, with internet access.

View task page
Execution log
SYSTEM

You are a package-building specialist operating a Ubuntu 22.04 bash shell via one tool: run_terminal_cmd.
The current working directory of every run_terminal_cmd is /home/peter.
Execution rules:
- Always pass non-interactive flags for any command that could prompt (e.g., -y, --yes, DEBIAN_FRONTEND=noninteractive).
- Don't include any newlines in the command.
- You can use sudo.
If you encounter any errors or issues while doing the user's request, you must fix them and continue the task.
At the end verify you did the user request correctly.

USER

You are given a curl v8.16.0 source code at /home/peter/curl.tar.gz. Please compile curl and install it to /home/peter/result. Create a symlink from /home/peter/result/curl to the actual binary. Make sure it builds with SSL support (TLS v1.3), brotli, zlib and zstd. The binary should be statically compiled for arm64. Do a trial run via qemu-aarch64-static, making sure this EXACT command works correctly: curl https://google.com

ASSISTANT
Show reasoning

This is a complex task that involves:
1. Extracting the curl source code from /home/peter/curl.tar.gz
2. Cross-compiling curl for arm64 (aarch64) architecture
3. Ensuring it's statically compiled
4. Including support for:
- SSL/TLS v1.3
- brotli
- zlib
- zstd
5. Installing to /home/peter/result
6. Creating a symlink from /home/peter/result/curl to the actual binary
7. Testing with qemu-aarch64-static to run curl https://google.com

Let me break this down:

1. First, I need to install the necessary tools:
- Cross-compilation toolchain for arm64
- qemu-aarch64-static for testing
- Development libraries for ssl, brotli, zlib, zstd (static versions for arm64)
- Build tools (make, gcc, etc.)

2. Extract the curl source

3. Build static versions of dependencies for arm64 (or find them):
- OpenSSL (for TLS 1.3 support)
- brotli
- zlib
- zstd

4. Configure curl with these static libraries for arm64

5. Build and install

6. Create the symlink

7. Test with qemu

This is going to be quite involved. Let me start step by step.

I'll help you compile curl statically for arm64 with all the required dependencies. This is a complex task that requires cross-compilation and building static libraries. Let me start:

compile-bench> cd /home/peter && ls -la curl.tar.gz
-rw-r--r-- 1 peter peter 4176617 Sep 29 18:16 curl.tar.gz
ASSISTANT
Show reasoning

Let me start by extracting the curl source and setting up the cross-compilation environment for arm64. I need to:

1. Extract curl source
2. Install cross-compilation tools for arm64
3. Build static libraries for arm64 of:
- OpenSSL (for TLS 1.3)
- Brotli
- Zlib
- Zstd
4. Configure and compile curl statically for arm64
5. Install to /home/peter/result
6. Create symlink
7. Test with qemu-aarch64-static

Let me proceed step by step.

compile-bench> cd /home/peter && tar -xzf curl.tar.gz && ls -la
total 4108
drwxr-x---  1 peter peter    4096 Sep 29 18:16 .
drwxr-xr-x  1 root  root     4096 Sep 15 11:21 ..
-rw-r--r--  1 peter peter     220 Jan  6  2022 .bash_logout
-rw-r--r--  1 peter peter    3771 Jan  6  2022 .bashrc
-rw-r--r--  1 peter peter     807 Jan  6  2022 .profile
drwxr-xr-x 14 peter peter    4096 Sep 10 05:43 curl-8.16.0
-rw-r--r--  1 peter peter 4176617 Sep 29 18:16 curl.tar.gz
↓ 9 lines
ASSISTANT
Show reasoning

Good, the curl source has been extracted. Now I need to:
1. Install cross-compilation tools for arm64
2. Build static libraries for arm64: OpenSSL (for TLS 1.3), brotli, zlib, and zstd
3. Cross-compile curl statically for arm64 with these dependencies
4. Install it to /home/peter/result
5. Create a symlink from /home/peter/result/curl to the actual binary
6. Test with qemu-aarch64-static

Let me start by installing the necessary tools.

compile-bench> sudo apt-get update -y
0% [Working]
            
Get:1 http://security.ubuntu.com/ubuntu jammy-security InRelease [129 kB]

0% [Waiting for headers] [1 InRelease 14.2 kB/129 kB 11%]
                                                         
Hit:2 http://archive.ubuntu.com/ubuntu jammy InRelease

                                                         
0% [1 InRelease 14.2 kB/129 kB 11%]
0% [Waiting for headers] [1 InRelease 14.2 kB/129 kB 11%]
                                                         
Get:3 http://archive.ubuntu.com/ubuntu jammy-updates InRelease [128 kB]

0% [3 InRelease 12.7 kB/128 kB 10%] [1 InRelease 22.9 kB/129 kB 18%]
                                                                    
0% [3 InRelease 64.9 kB/128 kB 51%]
0% [3 InRelease 88.0 kB/128 kB 69%]
0% [Waiting for headers] [Waiting for headers]
                                              
Get:4 http://security.ubuntu.com/ubuntu jammy-security/restricted amd64 Packages [5609 kB]

0% [Waiting for headers] [4 Packages 2655 B/5609 kB 0%]
0% [Waiting for headers] [4 Packages 12.8 kB/5609 kB 0%]
                                                        
Get:5 http://archive.ubuntu.com/ubuntu jammy-backports InRelease [127 kB]

0% [5 InRelease 2588 B/127 kB 2%] [4 Packages 104 kB/5609 kB 2%]
                                                                
0% [4 Packages 207 kB/5609 kB 4%]
17% [Waiting for headers] [4 Packages 299 kB/5609 kB 5%]
                                                        
Get:6 http://archive.ubuntu.com/ubuntu jammy-updates/universe amd64 Packages [1577 kB]

18% [6 Packages 2655 B/1577 kB 0%] [4 Packages 498 kB/5609 kB 9%]
                                                                 
42% [6 Packages 1316 kB/1577 kB 83%]
42% [4 Packages store 0 B] [6 Packages 1316 kB/1577 kB 83%] [Waiting for header
                                                                               
43% [4 Packages store 0 B] [Waiting for headers] [Waiting for headers]
                                                                      
Get:7 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 Packages [3690 kB]

43% [4 Packages store 0 B] [7 Packages 9550 B/3690 kB 0%] [Waiting for headers]
                                                                               
Get:8 http://security.ubuntu.com/ubuntu jammy-security/multiverse amd64 Packages [71.0 kB]

47% [4 Packages store 0 B] [7 Packages 1090 kB/3690 kB 30%] [8 Packages 64.9 kB
                                                                               
Get:9 http://security.ubuntu.com/ubuntu jammy-security/main amd64 Packages [3371 kB]

47% [4 Packages store 0 B] [7 Packages 1109 kB/3690 kB 30%] [9 Packages 56.2 kB
62% [4 Packages store 0 B] [7 Packages 1970 kB/3690 kB 53%] [Waiting for header
                                                                               
Get:10 http://security.ubuntu.com/ubuntu jammy-security/universe amd64 Packages [1274 kB]

62% [4 Packages store 0 B] [7 Packages 197
[command output truncated]
                                                
72% [7 Packages 3407 kB/3690 kB 92%] [10 Packages 986 kB/1274 kB 77%]
72% [6 Packages store 0 B] [7 Packages 3407 kB/3690 kB 92%] [10 Packages 986 kB
73% [6 Packages store 0 B] [Waiting for headers] [10 Packages 986 kB/1274 kB 77
                                                                               
Get:11 http://archive.ubuntu.com/ubuntu jammy-updates/restricted amd64 Packages [5804 kB]

73% [6 Packages store 0 B] [11 Packages 17.8 kB/5804 kB 0%] [10 Packages 986 kB
                                                                               
75% [6 Packages store 0 B] [11 Packages 171 kB/5804 kB 3%]
                                                          
81% [11 Packages 1865 kB/5804 kB 32%]
81% [8 Packages store 0 B] [11 Packages 1865 kB/5804 kB 32%]
                                                            
82% [11 Packages 1996 kB/5804 kB 34%]
82% [9 Packages store 0 B] [11 Packages 1996 kB/5804 kB 34%]
                                                            
Get:12 http://archive.ubuntu.com/ubuntu jammy-updates/multiverse amd64 Packages [69.1 kB]

96% [9 Packages store 0 B] [12 Packages 44.9 kB/69.1 kB 65%]
                                                            
97% [9 Packages store 0 B] [Waiting for headers]
                                                
Get:13 http://archive.ubuntu.com/ubuntu jammy-backports/universe amd64 Packages [35.2 kB]

97% [9 Packages store 0 B] [13 Packages 35.2 kB/35.2 kB 100%]
                                                             
97% [9 Packages store 0 B]
                          
97% [Working]
97% [7 Packages store 0 B]
                          
98% [Working]
98% [10 Packages store 0 B]
                           
98% [Working]
98% [11 Packages store 0 B]
                           
99% [Working]
99% [12 Packages store 0 B]
                           
99% [Working]
99% [13 Packages store 0 B]
                           
100% [Working]
              
Fetched 21.9 MB in 2s (12.4 MB/s)

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 3%

Reading package lists... 3%

Reading package lists... 4%

Reading package lists... 4%

Reading package lists... 41%

Reading package lists... 41%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 51%

Reading package lists... 51%

Reading package lists... 67%

Reading package lists... 67%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 80%

Reading package lists... 80%

Reading package lists... 96%

Reading package lists... 96%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... Done
↓ 18 lines
ASSISTANT
Show reasoning

Now I need to install all the necessary tools and dependencies for cross-compiling curl for arm64 with static linking. I'll need:
1. Cross-compilation toolchain for arm64
2. Build tools (make, autoconf, etc.)
3. QEMU for testing
4. Static libraries for: OpenSSL (for TLS 1.3), brotli, zlib, zstd

Let me install these step by step.

compile-bench> sudo DEBIAN_FRONTEND=noninteractive apt-get install -y gcc-aarch64-linux-gnu g++-aarch64-linux-gnu binutils-aarch64-linux-gnu build-essential autoconf automake libtool pkg-config qemu-user-static cmake git wget
Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 3%

Reading package lists... 3%

Reading package lists... 4%

Reading package lists... 4%

Reading package lists... 41%

Reading package lists... 41%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 51%

Reading package lists... 51%

Reading package lists... 67%

Reading package lists... 67%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 80%

Reading package lists... 80%

Reading package lists... 96%

Reading package lists... 96%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... Done


Building dependency tree... 0%

Building dependency tree... 0%

Building dependency tree... 50%

Building dependency tree... 50%

Building dependency tree... Done


Reading state information... 0% 

Reading state information... 1%

Reading state information... Done

build-essential is already the newest version (12.9ubuntu3).
wget is already the newest version (1.21.2-2ubuntu1.1).
qemu-user-static is already the newest version (1:6.2+dfsg-2ubuntu6.27).
The following additional packages will be installed:
  autotools-dev cmake-data cpp-11-aarch64-linux-gnu cpp-aarch64-linux-gnu
  dh-elpa-helper emacsen-common g++-11-aarch64-linux-gnu
  gcc-11-aarch64-linux-gnu gcc-11-aarch64-linux-gnu-base gcc-11-cross-base
  gcc-12-cross-base git-man less libarchive13 libasan6-arm64-cross
  libatomic1-arm64-cross libbsd0 libc6-arm64-cross libc6-dev-arm64-cross
  libcbor0.8 libcurl3-gnutls libedit2 liberror-perl libexpat1 libfido2-1
  libgcc-11-dev-arm64-cross libgcc-s1-arm64-cross libglib2.0-0 libglib2.0-data
  libgomp1-arm64-cross libhwasan0-arm64-cross libicu70 libitm1-arm64-cross
  libjsoncpp25 liblsan0-arm64-cross libltdl-dev libltdl7 libmd0 librhash0
  libsigsegv2 libstdc++-11-dev-arm64-cross libstdc++6-arm64-cross
  libtsan0-arm64-cross libubsan1-arm64-cross libuv1 libx11-6 libx11-data
  libxau6 libxcb1 libxdmcp6 libxext6 libxml2 libxmuu1
  linux-libc-dev-arm64-cross m4 openssh-client shared-mime-info xauth
  xdg-user-dirs
Suggested packages:
  autoconf-archive gnu-standards autoconf-doc gettext binutils-doc cmake-doc
  ninja-build cmake-format gcc-11-locales cpp-doc gcc-11-doc manpages-dev flex
  bison gdb-aarch64-linux-gnu gcc-doc gettext-base git-daemon-run
  | git-daemon-sysvinit git-doc git-email git-gui gitk gitweb git-cvs
  git-mediawiki git-svn lrzip libtool-doc gfortran | fortran95-compiler
  gcj-jdk m4-doc keychain libpam-ssh monkeysphere ssh-askpass
The following NEW packages will be installed:
  autoconf automake autotools-dev binutils-aarch64-linux-gnu cmake cmake-data
  cpp-11
[command output truncated]
22.04cross1) ...
Setting up libxdmcp6:amd64 (1:1.1.3-0ubuntu5) ...
Setting up libxcb1:amd64 (1.14-3ubuntu3) ...
Setting up libtool (2.4.6-15build2) ...
Setting up libasan6-arm64-cross (11.4.0-1ubuntu1~22.04cross1) ...
Setting up libedit2:amd64 (3.1-20210910-1build1) ...
Setting up libtsan0-arm64-cross (11.4.0-1ubuntu1~22.04cross1) ...
Setting up m4 (1.4.18-5ubuntu2) ...
Setting up libhwasan0-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up libc6-dev-arm64-cross (2.35-0ubuntu1cross3) ...
Setting up libstdc++6-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up cpp-aarch64-linux-gnu (4:11.2.0-1ubuntu1) ...
Setting up git (1:2.34.1-1ubuntu1.15) ...
Setting up autoconf (2.71-2) ...
Setting up libx11-6:amd64 (2:1.7.5-1ubuntu0.3) ...
Setting up libxml2:amd64 (2.9.13+dfsg-1ubuntu0.9) ...
Setting up libxmuu1:amd64 (2:1.1.3-3) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/automake.1.gz because associated file /usr/share/man/man1/automake-1.16.1.gz (of link group automake) doesn't exist
update-alternatives: warning: skip creation of /usr/share/man/man1/aclocal.1.gz because associated file /usr/share/man/man1/aclocal-1.16.1.gz (of link group automake) doesn't exist
Setting up libubsan1-arm64-cross (12.3.0-1ubuntu1~22.04cross1) ...
Setting up libarchive13:amd64 (3.6.0-1ubuntu1.5) ...
Setting up openssh-client (1:8.9p1-3ubuntu0.13) ...
update-alternatives: using /usr/bin/ssh to provide /usr/bin/rsh (rsh) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/rsh.1.gz because associated file /usr/share/man/man1/ssh.1.gz (of link group rsh) doesn't exist
update-alternatives: using /usr/bin/slogin to provide /usr/bin/rlogin (rlogin) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/rlogin.1.gz because associated file /usr/share/man/man1/slogin.1.gz (of link group rlogin) doesn't exist
update-alternatives: using /usr/bin/scp to provide /usr/bin/rcp (rcp) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/rcp.1.gz because associated file /usr/share/man/man1/scp.1.gz (of link group rcp) doesn't exist
Setting up libxext6:amd64 (2:1.3.4-1build1) ...
Setting up libgcc-11-dev-arm64-cross (11.4.0-1ubuntu1~22.04cross1) ...
Setting up libltdl-dev:amd64 (2.4.6-15build2) ...
Setting up shared-mime-info (2.1-2) ...
Setting up xauth (1:1.1-1build2) ...
Setting up cmake (3.22.1-1ubuntu1.22.04.2) ...
Setting up gcc-11-aarch64-linux-gnu (11.4.0-1ubuntu1~22.04cross1) ...
Setting up libstdc++-11-dev-arm64-cross (11.4.0-1ubuntu1~22.04cross1) ...
Setting up g++-11-aarch64-linux-gnu (11.4.0-1ubuntu1~22.04cross1) ...
Setting up gcc-aarch64-linux-gnu (4:11.2.0-1ubuntu1) ...
Setting up g++-aarch64-linux-gnu (4:11.2.0-1ubuntu1) ...
Processing triggers for libc-bin (2.35-0ubuntu3.10) ...
↓ 75 lines
ASSISTANT
Show reasoning

Good, now I have the cross-compilation toolchain installed. Now I need to build static versions of the dependencies for arm64:
1. OpenSSL (for TLS v1.3 support)
2. Brotli
3. Zlib
4. Zstd

Let me create a build directory structure and start building these dependencies statically for arm64.

compile-bench> mkdir -p /home/peter/build /home/peter/result /home/peter/sysroot
[empty output]
ASSISTANT
Show reasoning

Now I need to build static libraries for arm64. I'll need to build:
1. OpenSSL (for TLS/SSL support including TLS v1.3)
2. zlib (compression)
3. brotli (compression)
4. zstd (compression)

All of these need to be built as static libraries for aarch64. Let me set up the environment variables for cross-compilation first, then build each dependency, and finally build curl.

Let me start with setting up environment variables and building each dependency.

compile-bench> cd /home/peter/build && wget https://www.openssl.org/source/openssl-3.0.15.tar.gz
--2025-09-29 18:17:22--  https://www.openssl.org/source/openssl-3.0.15.tar.gz
Resolving www.openssl.org (www.openssl.org)... 34.49.79.89, 2600:1901:0:d50b::
Connecting to www.openssl.org (www.openssl.org)|34.49.79.89|:443... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: https://github.com/openssl/openssl/releases/download/openssl-3.0.15/openssl-3.0.15.tar.gz [following]
--2025-09-29 18:17:22--  https://github.com/openssl/openssl/releases/download/openssl-3.0.15/openssl-3.0.15.tar.gz
Resolving github.com (github.com)... 140.82.113.3
Connecting to github.com (github.com)|140.82.113.3|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://release-assets.githubusercontent.com/github-production-release-asset/7634677/3c20ec14-b294-4ab7-9440-8fc93414b244?sp=r&sv=2018-11-09&sr=b&spr=https&se=2025-09-29T19%3A10%3A43Z&rscd=attachment%3B+filename%3Dopenssl-3.0.15.tar.gz&rsct=application%2Foctet-stream&skoid=96c2d410-5711-43a1-aedd-ab1947aa7ab0&sktid=398a6654-997b-47e9-b12b-9515b896b4de&skt=2025-09-29T18%3A10%3A01Z&ske=2025-09-29T19%3A10%3A43Z&sks=b&skv=2018-11-09&sig=zh4QY6j4JwJBehxf4ALBW1cIk45UnwhidlLVyl9MYeM%3D&jwt=eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJpc3MiOiJnaXRodWIuY29tIiwiYXVkIjoicmVsZWFzZS1hc3NldHMuZ2l0aHVidXNlcmNvbnRlbnQuY29tIiwia2V5Ijoia2V5MSIsImV4cCI6MTc1OTE3MDE0MiwibmJmIjoxNzU5MTY5ODQyLCJwYXRoIjoicmVsZWFzZWFzc2V0cHJvZHVjdGlvbi5ibG9iLmNvcmUud2luZG93cy5uZXQifQ.XgenhDluh0GjuBWXERAZyuZgxX1_X7AkORSb4EL3JBM&response-content-disposition=attachment%3B%20filename%3Dopenssl-3.0.15.tar.gz&response-content-type=application%2Foctet-stream [following]
--2025-09-29 18:17:22--  https://release-assets.githubusercontent.com/github-production-release-asset/7634677/3c20ec14-b294-4ab7-9440-8fc93414b244?sp=r&sv=2018-11-09&sr=b&spr=https&se=2025-09-29T19%3A10%3A43Z&rscd=attachment%3B+filename%3Dopenssl-3.0.15.tar.gz&rsct=application%2Foctet-stream&skoid=96c2d410-5711-43a1-aedd-ab1947aa7ab0&sktid=398a6654-997b-47e9-b12b-9515b896b4de&skt=2025-09-29T18%3A10%3A01Z&ske=2025-09-29T19%3A10%3A43Z&sks=b&skv=2018-11-09&sig=zh4QY6j4JwJBehxf4ALBW1cIk45UnwhidlLVyl9MYeM%3D&jwt=eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJpc3MiOiJnaXRodWIuY29tIiwiYXVkIjoicmVsZWFzZS1hc3NldHMuZ2l0aHVidXNlcmNvbnRlbnQuY29tIiwia2V5Ijoia2V5MSIsImV4cCI6MTc1OTE3MDE0MiwibmJmIjoxNzU5MTY5ODQyLCJwYXRoIjoicmVsZWFzZWFzc2V0cHJvZHVjdGlvbi5ibG9iLmNvcmUud2luZG93cy5uZXQifQ.XgenhDluh0GjuBWXERAZyuZgxX1_X7AkORSb4EL3JBM&response-content-disposition=attachment%3B%20filename%3Dopenssl-3.0.15.tar.gz&response-content-type=application%2Foctet-stream
Resolving release-assets.githubusercontent.com (release-assets.githubusercontent.com)... 185.199.108.133, 185.199.109.133, 185.199.111.133, ...
Connecting to release-assets.githubusercontent.com (release-assets.githubusercontent.com)|185.199.108.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 15318633 (15M) [application/octet-stream]
Saving to: 'openssl-3.0.15.tar.gz'


openssl-3.0.15.tar.   0%[                    ]       0  --.-KB/s               
openssl-3.0.15.tar. 100%[===================>]  14.61M  --.-KB/s    in 0.03s   

2025-09-29 18:17:22 (493 MB/s) - 'openssl-3.0.15.tar.gz' saved [15318633/15318633]
↓ 21 lines
ASSISTANT
Show reasoning

Good, now I need to download and build all the dependencies statically for arm64:
1. OpenSSL (already downloaded)
2. zlib
3. brotli
4. zstd

Let me download the others and then build them all statically for arm64.

compile-bench> cd /home/peter/build && wget https://zlib.net/zlib-1.3.1.tar.gz
--2025-09-29 18:17:27--  https://zlib.net/zlib-1.3.1.tar.gz
Resolving zlib.net (zlib.net)... 85.187.148.2
Connecting to zlib.net (zlib.net)|85.187.148.2|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1512791 (1.4M) [application/x-gzip]
Saving to: 'zlib-1.3.1.tar.gz'


zlib-1.3.1.tar.gz     0%[                    ]       0  --.-KB/s               
zlib-1.3.1.tar.gz    29%[====>               ] 429.47K  1.82MB/s               
zlib-1.3.1.tar.gz   100%[===================>]   1.44M  4.89MB/s    in 0.3s    

2025-09-29 18:17:27 (4.89 MB/s) - 'zlib-1.3.1.tar.gz' saved [1512791/1512791]
↓ 11 lines
ASSISTANT
Show reasoning

Let me continue downloading the dependencies for brotli and zstd, then compile all of them statically for arm64.

compile-bench> cd /home/peter/build && wget https://github.com/google/brotli/archive/refs/tags/v1.1.0.tar.gz -O brotli-1.1.0.tar.gz
--2025-09-29 18:17:30--  https://github.com/google/brotli/archive/refs/tags/v1.1.0.tar.gz
Resolving github.com (github.com)... 140.82.113.3
Connecting to github.com (github.com)|140.82.113.3|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://codeload.github.com/google/brotli/tar.gz/refs/tags/v1.1.0 [following]
--2025-09-29 18:17:31--  https://codeload.github.com/google/brotli/tar.gz/refs/tags/v1.1.0
Resolving codeload.github.com (codeload.github.com)... 140.82.114.10
Connecting to codeload.github.com (codeload.github.com)|140.82.114.10|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 511969 (500K) [application/x-gzip]
Saving to: 'brotli-1.1.0.tar.gz'


brotli-1.1.0.tar.gz   0%[                    ]       0  --.-KB/s               
brotli-1.1.0.tar.gz 100%[===================>] 499.97K  --.-KB/s    in 0.07s   

2025-09-29 18:17:31 (7.27 MB/s) - 'brotli-1.1.0.tar.gz' saved [511969/511969]
↓ 16 lines
ASSISTANT
Show reasoning

The user wants me to compile curl statically for arm64 with SSL (TLS 1.3), brotli, zlib, and zstd support. I need to download and compile all dependencies statically, then compile curl. I've downloaded OpenSSL, zlib, and brotli so far. I still need zstd.

Let me continue downloading zstd, then start compiling all the dependencies statically for arm64.

compile-bench> cd /home/peter/build && wget https://github.com/facebook/zstd/releases/download/v1.5.6/zstd-1.5.6.tar.gz
--2025-09-29 18:17:35--  https://github.com/facebook/zstd/releases/download/v1.5.6/zstd-1.5.6.tar.gz
Resolving github.com (github.com)... 140.82.113.3
Connecting to github.com (github.com)|140.82.113.3|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://release-assets.githubusercontent.com/github-production-release-asset/29759715/5a6a726c-abce-4c08-8237-428805ddec52?sp=r&sv=2018-11-09&sr=b&spr=https&se=2025-09-29T19%3A09%3A51Z&rscd=attachment%3B+filename%3Dzstd-1.5.6.tar.gz&rsct=application%2Foctet-stream&skoid=96c2d410-5711-43a1-aedd-ab1947aa7ab0&sktid=398a6654-997b-47e9-b12b-9515b896b4de&skt=2025-09-29T18%3A09%3A25Z&ske=2025-09-29T19%3A09%3A51Z&sks=b&skv=2018-11-09&sig=0X%2F6%2B85Ek0%2BJhTcx6u7fgLxOqHjArTR16djW5dnv8YE%3D&jwt=eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJpc3MiOiJnaXRodWIuY29tIiwiYXVkIjoicmVsZWFzZS1hc3NldHMuZ2l0aHVidXNlcmNvbnRlbnQuY29tIiwia2V5Ijoia2V5MSIsImV4cCI6MTc1OTE3MDA0MywibmJmIjoxNzU5MTY5NzQzLCJwYXRoIjoicmVsZWFzZWFzc2V0cHJvZHVjdGlvbi5ibG9iLmNvcmUud2luZG93cy5uZXQifQ.f4_j2rRX2y0XYsQEvtSHcSXvqs4Z6YxySHF531Jy23A&response-content-disposition=attachment%3B%20filename%3Dzstd-1.5.6.tar.gz&response-content-type=application%2Foctet-stream [following]
--2025-09-29 18:17:36--  https://release-assets.githubusercontent.com/github-production-release-asset/29759715/5a6a726c-abce-4c08-8237-428805ddec52?sp=r&sv=2018-11-09&sr=b&spr=https&se=2025-09-29T19%3A09%3A51Z&rscd=attachment%3B+filename%3Dzstd-1.5.6.tar.gz&rsct=application%2Foctet-stream&skoid=96c2d410-5711-43a1-aedd-ab1947aa7ab0&sktid=398a6654-997b-47e9-b12b-9515b896b4de&skt=2025-09-29T18%3A09%3A25Z&ske=2025-09-29T19%3A09%3A51Z&sks=b&skv=2018-11-09&sig=0X%2F6%2B85Ek0%2BJhTcx6u7fgLxOqHjArTR16djW5dnv8YE%3D&jwt=eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJpc3MiOiJnaXRodWIuY29tIiwiYXVkIjoicmVsZWFzZS1hc3NldHMuZ2l0aHVidXNlcmNvbnRlbnQuY29tIiwia2V5Ijoia2V5MSIsImV4cCI6MTc1OTE3MDA0MywibmJmIjoxNzU5MTY5NzQzLCJwYXRoIjoicmVsZWFzZWFzc2V0cHJvZHVjdGlvbi5ibG9iLmNvcmUud2luZG93cy5uZXQifQ.f4_j2rRX2y0XYsQEvtSHcSXvqs4Z6YxySHF531Jy23A&response-content-disposition=attachment%3B%20filename%3Dzstd-1.5.6.tar.gz&response-content-type=application%2Foctet-stream
Resolving release-assets.githubusercontent.com (release-assets.githubusercontent.com)... 185.199.110.133, 185.199.108.133, 185.199.109.133, ...
Connecting to release-assets.githubusercontent.com (release-assets.githubusercontent.com)|185.199.110.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 2406875 (2.3M) [application/octet-stream]
Saving to: 'zstd-1.5.6.tar.gz'


zstd-1.5.6.tar.gz     0%[                    ]       0  --.-KB/s               
zstd-1.5.6.tar.gz   100%[===================>]   2.29M  --.-KB/s    in 0.006s  

2025-09-29 18:17:36 (371 MB/s) - 'zstd-1.5.6.tar.gz' saved [2406875/2406875]
↓ 16 lines
ASSISTANT
Show reasoning

Now I need to extract and build all the dependencies statically for arm64. Let me start by extracting all archives, then building them in order:
1. OpenSSL
2. zlib
3. brotli
4. zstd
5. curl

I'll need to use cross-compilation flags for aarch64.

compile-bench> cd /home/peter/build && tar -xzf openssl-3.0.15.tar.gz && tar -xzf zlib-1.3.1.tar.gz && tar -xzf brotli-1.1.0.tar.gz && tar -xzf zstd-1.5.6.tar.gz
[empty output]
ASSISTANT
Show reasoning

Good, now I need to build all the dependencies statically for arm64. Let me start with OpenSSL, then zlib, brotli, and zstd. I'll need to use the cross-compiler and install everything to /home/peter/sysroot.

Let me set up environment variables for cross-compilation to arm64:
- CC=aarch64-linux-gnu-gcc
- CXX=aarch64-linux-gnu-g++
- AR=aarch64-linux-gnu-ar
- RANLIB=aarch64-linux-gnu-ranlib
- PREFIX=/home/peter/sysroot

Let's start with OpenSSL:

compile-bench> cd /home/peter/build/openssl-3.0.15 && ./Configure linux-aarch64 --prefix=/home/peter/sysroot --openssldir=/home/peter/sysroot/ssl no-shared no-tests --cross-compile-prefix=aarch64-linux-gnu-
Configuring OpenSSL version 3.0.15 for target linux-aarch64
Using os-specific seed configuration
Created configdata.pm
Running configdata.pm
Created Makefile.in
Created Makefile
Created include/openssl/configuration.h

**********************************************************************
***                                                                ***
***   OpenSSL has been successfully configured                     ***
***                                                                ***
***   If you encounter a problem while building, please open an    ***
***   issue on GitHub <https://github.com/openssl/openssl/issues>  ***
***   and include the output from the following command:           ***
***                                                                ***
***       perl configdata.pm --dump                                ***
***                                                                ***
***   (If you are new to OpenSSL, you might want to consult the    ***
***   'Troubleshooting' section in the INSTALL.md file first)      ***
***                                                                ***
**********************************************************************
↓ 23 lines
ASSISTANT
Show reasoning

Good, OpenSSL is configured. Now I need to compile and install it to the sysroot.

compile-bench> cd /home/peter/build/openssl-3.0.15 && make -j$(nproc)
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/crypto/bn_conf.h.in > include/crypto/bn_conf.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/crypto/dso_conf.h.in > include/crypto/dso_conf.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/asn1.h.in > include/openssl/asn1.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/asn1t.h.in > include/openssl/asn1t.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/bio.h.in > include/openssl/bio.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/cmp.h.in > include/openssl/cmp.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/cms.h.in > include/openssl/cms.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/conf.h.in > include/openssl/conf.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/crmf.h.in > include/openssl/crmf.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/crypto.h.in > include/openssl/crypto.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/ct.h.in > include/openssl/ct.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/err.h.in > include/openssl/err.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/ess.h.in > include/openssl/ess.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/fipskey.h.in > include/openssl/fipskey.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/lhash.h.in > include/openssl/lhash.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/ocsp.h.in > include/openssl/ocsp.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/opensslv.h.in > include/openssl/opensslv.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/pkcs12.h.in > include/openssl/pkcs12.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/pkcs7.h.in > include/openssl/pkcs7.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/safestack.h.in > include/openssl/safestack.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/srp.h.in > include/openssl/srp.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/ssl.h.in > include/openssl/ssl.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/ui.h.in > include/openssl/ui.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/x509.h.in > include/openssl/x509.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/x509_vfy.h.in > include/openssl/x509_vfy.h
/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" "-oMakefile" include/openssl/x509v3.h.in 
[command output truncated]
mmon/der/libcommon-lib-der_ecx_gen.o providers/common/der/libcommon-lib-der_ecx_key.o providers/common/der/libcommon-lib-der_rsa_gen.o providers/common/der/libcommon-lib-der_rsa_key.o providers/common/der/libcommon-lib-der_wrap_gen.o providers/common/libcommon-lib-provider_ctx.o providers/common/libcommon-lib-provider_err.o providers/implementations/ciphers/libcommon-lib-ciphercommon.o providers/implementations/ciphers/libcommon-lib-ciphercommon_block.o providers/implementations/ciphers/libcommon-lib-ciphercommon_ccm.o providers/implementations/ciphers/libcommon-lib-ciphercommon_ccm_hw.o providers/implementations/ciphers/libcommon-lib-ciphercommon_gcm.o providers/implementations/ciphers/libcommon-lib-ciphercommon_gcm_hw.o providers/implementations/ciphers/libcommon-lib-ciphercommon_hw.o providers/implementations/digests/libcommon-lib-digestcommon.o ssl/record/libcommon-lib-tls_pad.o
aarch64-linux-gnu-ranlib libcrypto.a || echo Never mind.
aarch64-linux-gnu-gcc -fPIC -pthread -Wa,--noexecstack -Wall -O3 -L. -Wl,-z,defs -Wl,-znodelete -shared -Wl,-Bsymbolic   \
	-o providers/legacy.so -Wl,--version-script=providers/legacy.ld \
	providers/legacy-dso-legacyprov.o \
	providers/liblegacy.a providers/libcommon.a -lcrypto -ldl -pthread 
rm -f apps/openssl
${LDCMD:-aarch64-linux-gnu-gcc} -pthread -Wa,--noexecstack -Wall -O3 -L.   \
	-o apps/openssl \
	apps/lib/openssl-bin-cmp_mock_srv.o \
	apps/openssl-bin-asn1parse.o apps/openssl-bin-ca.o \
	apps/openssl-bin-ciphers.o apps/openssl-bin-cmp.o \
	apps/openssl-bin-cms.o apps/openssl-bin-crl.o \
	apps/openssl-bin-crl2pkcs7.o apps/openssl-bin-dgst.o \
	apps/openssl-bin-dhparam.o apps/openssl-bin-dsa.o \
	apps/openssl-bin-dsaparam.o apps/openssl-bin-ec.o \
	apps/openssl-bin-ecparam.o apps/openssl-bin-enc.o \
	apps/openssl-bin-engine.o apps/openssl-bin-errstr.o \
	apps/openssl-bin-fipsinstall.o apps/openssl-bin-gendsa.o \
	apps/openssl-bin-genpkey.o apps/openssl-bin-genrsa.o \
	apps/openssl-bin-info.o apps/openssl-bin-kdf.o \
	apps/openssl-bin-list.o apps/openssl-bin-mac.o \
	apps/openssl-bin-nseq.o apps/openssl-bin-ocsp.o \
	apps/openssl-bin-openssl.o apps/openssl-bin-passwd.o \
	apps/openssl-bin-pkcs12.o apps/openssl-bin-pkcs7.o \
	apps/openssl-bin-pkcs8.o apps/openssl-bin-pkey.o \
	apps/openssl-bin-pkeyparam.o apps/openssl-bin-pkeyutl.o \
	apps/openssl-bin-prime.o apps/openssl-bin-progs.o \
	apps/openssl-bin-rand.o apps/openssl-bin-rehash.o \
	apps/openssl-bin-req.o apps/openssl-bin-rsa.o \
	apps/openssl-bin-rsautl.o apps/openssl-bin-s_client.o \
	apps/openssl-bin-s_server.o apps/openssl-bin-s_time.o \
	apps/openssl-bin-sess_id.o apps/openssl-bin-smime.o \
	apps/openssl-bin-speed.o apps/openssl-bin-spkac.o \
	apps/openssl-bin-srp.o apps/openssl-bin-storeutl.o \
	apps/openssl-bin-ts.o apps/openssl-bin-verify.o \
	apps/openssl-bin-version.o apps/openssl-bin-x509.o \
	apps/libapps.a -lssl -lcrypto -ldl -pthread 
make[1]: Leaving directory '/home/peter/build/openssl-3.0.15'
↓ 67 lines
ASSISTANT
Show reasoning

The OpenSSL build completed successfully. Now I need to install it.

compile-bench> cd /home/peter/build/openssl-3.0.15 && make install_sw install_ssldirs
"make" depend && "make" _build_libs
make[1]: Entering directory '/home/peter/build/openssl-3.0.15'
make[1]: Leaving directory '/home/peter/build/openssl-3.0.15'
make[1]: Entering directory '/home/peter/build/openssl-3.0.15'
make[1]: Leaving directory '/home/peter/build/openssl-3.0.15'
created directory `/home/peter/sysroot/lib'
*** Installing runtime libraries
*** Installing development files
created directory `/home/peter/sysroot/include'
created directory `/home/peter/sysroot/include/openssl'
install ./include/openssl/aes.h -> /home/peter/sysroot/include/openssl/aes.h
install ./include/openssl/asn1.h -> /home/peter/sysroot/include/openssl/asn1.h
install ./include/openssl/asn1_mac.h -> /home/peter/sysroot/include/openssl/asn1_mac.h
install ./include/openssl/asn1err.h -> /home/peter/sysroot/include/openssl/asn1err.h
install ./include/openssl/asn1t.h -> /home/peter/sysroot/include/openssl/asn1t.h
install ./include/openssl/async.h -> /home/peter/sysroot/include/openssl/async.h
install ./include/openssl/asyncerr.h -> /home/peter/sysroot/include/openssl/asyncerr.h
install ./include/openssl/bio.h -> /home/peter/sysroot/include/openssl/bio.h
install ./include/openssl/bioerr.h -> /home/peter/sysroot/include/openssl/bioerr.h
install ./include/openssl/blowfish.h -> /home/peter/sysroot/include/openssl/blowfish.h
install ./include/openssl/bn.h -> /home/peter/sysroot/include/openssl/bn.h
install ./include/openssl/bnerr.h -> /home/peter/sysroot/include/openssl/bnerr.h
install ./include/openssl/buffer.h -> /home/peter/sysroot/include/openssl/buffer.h
install ./include/openssl/buffererr.h -> /home/peter/sysroot/include/openssl/buffererr.h
install ./include/openssl/camellia.h -> /home/peter/sysroot/include/openssl/camellia.h
install ./include/openssl/cast.h -> /home/peter/sysroot/include/openssl/cast.h
install ./include/openssl/cmac.h -> /home/peter/sysroot/include/openssl/cmac.h
install ./include/openssl/cmp.h -> /home/peter/sysroot/include/openssl/cmp.h
install ./include/openssl/cmp_util.h -> /home/peter/sysroot/include/openssl/cmp_util.h
install ./include/openssl/cmperr.h -> /home/peter/sysroot/include/openssl/cmperr.h
install ./include/openssl/cms.h -> /home/peter/sysroot/include/openssl/cms.h
install ./include/openssl/cmserr.h -> /home/peter/sysroot/include/openssl/cmserr.h
install ./include/openssl/comp.h -> /home/peter/sysroot/include/openssl/comp.h
install ./include/openssl/comperr.h -> /home/peter/sysroot/include/openssl/comperr.h
install ./include/openssl/conf.h -> /home/peter/sysroot/include/openssl/conf.h
install ./include/openssl/conf_api.h -> /home/peter/sysroot/include/openssl/conf_api.h
install ./include/openssl/conferr.h -> /home/peter/sysroot/include/openssl/conferr.h
install ./include/openssl/configuration.h -> /home/peter/sysroot/include/openssl/configuration.h
install ./include/openssl/conftypes.h -> /home/peter/sysroot/include/openssl/conftypes.h
install ./include/openssl/core.h -> /home/peter/sysroot/
[command output truncated]
home/peter/sysroot/include/openssl/txt_db.h
install ./include/openssl/types.h -> /home/peter/sysroot/include/openssl/types.h
install ./include/openssl/ui.h -> /home/peter/sysroot/include/openssl/ui.h
install ./include/openssl/uierr.h -> /home/peter/sysroot/include/openssl/uierr.h
install ./include/openssl/whrlpool.h -> /home/peter/sysroot/include/openssl/whrlpool.h
install ./include/openssl/x509.h -> /home/peter/sysroot/include/openssl/x509.h
install ./include/openssl/x509_vfy.h -> /home/peter/sysroot/include/openssl/x509_vfy.h
install ./include/openssl/x509err.h -> /home/peter/sysroot/include/openssl/x509err.h
install ./include/openssl/x509v3.h -> /home/peter/sysroot/include/openssl/x509v3.h
install ./include/openssl/x509v3err.h -> /home/peter/sysroot/include/openssl/x509v3err.h
install libcrypto.a -> /home/peter/sysroot/lib/libcrypto.a
install libssl.a -> /home/peter/sysroot/lib/libssl.a
created directory `/home/peter/sysroot/lib/pkgconfig'
install libcrypto.pc -> /home/peter/sysroot/lib/pkgconfig/libcrypto.pc
install libssl.pc -> /home/peter/sysroot/lib/pkgconfig/libssl.pc
install openssl.pc -> /home/peter/sysroot/lib/pkgconfig/openssl.pc
"make" depend && "make" _build_modules
make[1]: Entering directory '/home/peter/build/openssl-3.0.15'
make[1]: Leaving directory '/home/peter/build/openssl-3.0.15'
make[1]: Entering directory '/home/peter/build/openssl-3.0.15'
make[1]: Nothing to be done for '_build_modules'.
make[1]: Leaving directory '/home/peter/build/openssl-3.0.15'
created directory `/home/peter/sysroot/lib/engines-3'
*** Installing engines
created directory `/home/peter/sysroot/lib/ossl-modules'
*** Installing modules
install providers/legacy.so -> /home/peter/sysroot/lib/ossl-modules/legacy.so
"make" depend && "make" _build_programs
make[1]: Entering directory '/home/peter/build/openssl-3.0.15'
make[1]: Leaving directory '/home/peter/build/openssl-3.0.15'
make[1]: Entering directory '/home/peter/build/openssl-3.0.15'
make[1]: Nothing to be done for '_build_programs'.
make[1]: Leaving directory '/home/peter/build/openssl-3.0.15'
created directory `/home/peter/sysroot/bin'
*** Installing runtime programs
install apps/openssl -> /home/peter/sysroot/bin/openssl
install tools/c_rehash -> /home/peter/sysroot/bin/c_rehash
created directory `/home/peter/sysroot/ssl'
created directory `/home/peter/sysroot/ssl/certs'
created directory `/home/peter/sysroot/ssl/private'
created directory `/home/peter/sysroot/ssl/misc'
install apps/CA.pl -> /home/peter/sysroot/ssl/misc/CA.pl
install apps/tsget.pl -> /home/peter/sysroot/ssl/misc/tsget.pl
link /home/peter/sysroot/ssl/misc/tsget -> /home/peter/sysroot/ssl/misc/tsget.pl
install ./apps/openssl.cnf -> /home/peter/sysroot/ssl/openssl.cnf.dist
install ./apps/openssl.cnf -> /home/peter/sysroot/ssl/openssl.cnf
install ./apps/ct_log_list.cnf -> /home/peter/sysroot/ssl/ct_log_list.cnf.dist
install ./apps/ct_log_list.cnf -> /home/peter/sysroot/ssl/ct_log_list.cnf
↓ 90 lines
ASSISTANT
Show reasoning

Good, OpenSSL is installed. Now let me build zlib statically for arm64.

compile-bench> cd /home/peter/build/zlib-1.3.1 && CC=aarch64-linux-gnu-gcc AR=aarch64-linux-gnu-ar RANLIB=aarch64-linux-gnu-ranlib ./configure --prefix=/home/peter/sysroot --static
Building static library libz.a version 1.3.1 with aarch64-linux-gnu-gcc.
Checking for size_t... Yes.
Checking for off64_t... Yes.
Checking for fseeko... Yes.
Checking for strerror... Yes.
Checking for unistd.h... Yes.
Checking for stdarg.h... Yes.
Checking whether to use vs[n]printf() or s[n]printf()... using vs[n]printf().
Checking for vsnprintf() in stdio.h... Yes.
Checking for return value of vsnprintf()... Yes.
Checking for attribute(visibility) support... Yes.
↓ 12 lines
ASSISTANT
Show reasoning

Good, zlib is configured. Now let me build and install it.

compile-bench> cd /home/peter/build/zlib-1.3.1 && make -j$(nproc) && make install
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -I. -c -o example.o test/example.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o adler32.o adler32.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o crc32.o crc32.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o deflate.o deflate.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o infback.o infback.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o inffast.o inffast.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o inflate.o inflate.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o inftrees.o inftrees.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o trees.o trees.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o zutil.o zutil.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o compress.o compress.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o uncompr.o uncompr.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o gzclose.o gzclose.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o gzlib.o gzlib.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o gzread.o gzread.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -c -o gzwrite.o gzwrite.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -I. -c -o minigzip.o test/minigzip.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -I. -D_FILE_OFFSET_BITS=64 -c -o example64.o test/example.c
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -I. -D_FILE_OFFSET_BITS=64 -c -o minigzip64.o test/minigzip.c
aarch64-linux-gnu-ar rc libz.a adler32.o crc32.o deflate.o infback.o inffast.o inflate.o inftrees.o trees.o zutil.o compress.o uncompr.o gzclose.o gzlib.o gzread.o gzwrite.o 
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -o example example.o -L. libz.a
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -o minigzip minigzip.o -L. libz.a
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -o example64 example64.o -L. libz.a
aarch64-linux-gnu-gcc -O3 -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN  -o minigzip64 minigzip64.o -L. libz.a
rm -f /home/peter/sysroot/lib/libz.a
cp libz.a /home/peter/sysroot/lib
chmod 644 /home/peter/sysroot/lib/libz.a
rm -f /home/peter/sysroot/share/man/man3/zlib.3
cp zlib.3 /home/peter/sysroot/share/man/man3
chmod 644 /home/peter/sysroot/share/man/man3/zlib.3
rm -f /home/peter/sysroot/lib/pkgconfig/zlib.pc
cp zlib.pc /home/peter/sysroot/lib/pkgconfig
chmod 644 /home/peter/sysroot/lib/pkgconfig/zlib.pc
rm -f /home/peter/sysroot/include/zlib.h /home/peter/sysroot/include/zconf.h
cp zlib.h zconf.h /home/peter/sysroot/include
chmod 644 /home/peter/sysroot/include/zlib.h /home/peter/sysroot/include/zconf.h
↓ 37 lines
ASSISTANT
Show reasoning

Good! OpenSSL and zlib are now compiled and installed. Now let me build brotli.

compile-bench> cd /home/peter/build && mkdir brotli-build && cd brotli-build && cmake -DCMAKE_BUILD_TYPE=Release -DBUILD_SHARED_LIBS=OFF -DCMAKE_INSTALL_PREFIX=/home/peter/sysroot -DCMAKE_C_COMPILER=aarch64-linux-gnu-gcc -DCMAKE_SYSTEM_NAME=Linux -DCMAKE_SYSTEM_PROCESSOR=aarch64 ../brotli-1.1.0
-- The C compiler identification is GNU 11.4.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/aarch64-linux-gnu-gcc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Build type is 'Release'
-- Performing Test BROTLI_EMSCRIPTEN
-- Performing Test BROTLI_EMSCRIPTEN - Failed
-- Compiler is not EMSCRIPTEN
-- Looking for log2
-- Looking for log2 - not found
-- Looking for log2
-- Looking for log2 - found
-- Detected aarch64-linux-gnu cross-compilation
CMake Warning at CMakeLists.txt:264 (message):
  Test file tests/testdata/alice29.txt does not exist.


CMake Warning at CMakeLists.txt:264 (message):
  Test file tests/testdata/asyoulik.txt does not exist.


CMake Warning at CMakeLists.txt:264 (message):
  Test file tests/testdata/lcet10.txt does not exist.


CMake Warning at CMakeLists.txt:264 (message):
  Test file tests/testdata/plrabn12.txt does not exist.


-- Configuring done
-- Generating done
-- Build files have been written to: /home/peter/build/brotli-build
↓ 35 lines
ASSISTANT
Show reasoning

Now I need to build brotli and install it.

compile-bench> cd /home/peter/build/brotli-build && make -j$(nproc) && make install
[  2%] Building C object CMakeFiles/brotlicommon.dir/c/common/platform.c.o
[  5%] Building C object CMakeFiles/brotlicommon.dir/c/common/transform.c.o
[ 13%] Building C object CMakeFiles/brotlicommon.dir/c/common/dictionary.c.o
[ 13%] Building C object CMakeFiles/brotlicommon.dir/c/common/constants.c.o
[ 13%] Building C object CMakeFiles/brotlicommon.dir/c/common/context.c.o
[ 16%] Building C object CMakeFiles/brotlicommon.dir/c/common/shared_dictionary.c.o
[ 19%] Linking C static library libbrotlicommon.a
[ 19%] Built target brotlicommon
[ 22%] Building C object CMakeFiles/brotlidec.dir/c/dec/bit_reader.c.o
[ 27%] Building C object CMakeFiles/brotlidec.dir/c/dec/decode.c.o
[ 27%] Building C object CMakeFiles/brotlidec.dir/c/dec/huffman.c.o
[ 33%] Building C object CMakeFiles/brotlienc.dir/c/enc/backward_references.c.o
[ 33%] Building C object CMakeFiles/brotlidec.dir/c/dec/state.c.o
[ 36%] Building C object CMakeFiles/brotlienc.dir/c/enc/backward_references_hq.c.o
[ 41%] Building C object CMakeFiles/brotlienc.dir/c/enc/block_splitter.c.o
[ 41%] Building C object CMakeFiles/brotlienc.dir/c/enc/bit_cost.c.o
[ 44%] Building C object CMakeFiles/brotlienc.dir/c/enc/brotli_bit_stream.c.o
[ 47%] Building C object CMakeFiles/brotlienc.dir/c/enc/cluster.c.o
[ 50%] Building C object CMakeFiles/brotlienc.dir/c/enc/command.c.o
[ 52%] Building C object CMakeFiles/brotlienc.dir/c/enc/compound_dictionary.c.o
[ 55%] Building C object CMakeFiles/brotlienc.dir/c/enc/compress_fragment.c.o
[ 58%] Building C object CMakeFiles/brotlienc.dir/c/enc/compress_fragment_two_pass.c.o
[ 61%] Building C object CMakeFiles/brotlienc.dir/c/enc/dictionary_hash.c.o
[ 63%] Building C object CMakeFiles/brotlienc.dir/c/enc/encode.c.o
[ 66%] Building C object CMakeFiles/brotlienc.dir/c/enc/encoder_dict.c.o
[ 69%] Building C object CMakeFiles/brotlienc.dir/c/enc/entropy_encode.c.o
[ 72%] Building C object CMakeFiles/brotlienc.dir/c/enc/fast_log.c.o
[ 75%] Building C object CMakeFiles/brotlienc.dir/c/enc/histogram.c.o
[ 77%] Building C object CMakeFiles/brotlienc.dir/c/enc/literal_cost.c.o
[ 80%] Building C object CMakeFiles/brotlienc.dir/c/enc/memory.c.o
[ 83%] Building C object CMakeFiles/brotlienc.dir/c/enc/metablock.c.o
[ 86%] Building C object CMakeFiles/brotlienc.dir/c/enc/static_dict.c.o
[ 88%] Linking C static library libbrotlidec.a
[ 88%] Built target brotlidec
[ 91%] Building C object CMakeFiles/brotlienc.dir/c/enc/utf8_util.c.o
[ 94%] Linking C static library libbrotlienc.a
[ 94%] Built target brotlienc
[ 97%] Building C object CMakeFiles/brotli.dir/c/tools/brotli.c.o
[100%] Linking C executable brotli
[100%] Built target brotli
Consolidate compiler generated dependencies of target brotlicommon
[ 19%] Built target brotlicommon
Consolidate compiler generated dependencies of target brotlidec
[ 33%] Built target brotlidec
Consolidate compiler generated dependencies of target brotlienc
[ 94%] Built target brotlienc
Consolidate compiler generated dependencies of target brotli
[100%] Built target brotli
Install the project...
-- Install configuration: "Release"
-- Installing: /home/peter/sysroot/bin/brotli
-- Installing: /home/peter/sysroot/lib/libbrotlienc.a
-- Installing: /home/peter/sysroot/lib/libbrotlidec.a
-- Installing: /home/peter/sysroot/lib/libbrotlicommon.a
-- Installing: /home/peter/sysroot/include/brotli
-- Installing: /home/peter/sysroot/include/brotli/encode.h
-- Installing: /home/peter/sysroot/include/brotli/shared_dictionary.h
-- Installing: /home/peter/sysroot/include/brotli/types.h
-- Installing: /home/peter/sysroot/include/brotli/port.h
-- Installing: /home/peter/sysroot/include/brotli/decode.h
-- Installing: /home/peter/sysroot/lib/pkgconfig/libbrotlicommon.pc
-- Installing: /home/peter/sysroot/lib/pkgconfig/libbrotlidec.pc
-- Installing: /home/peter/sysroot/lib/pkgconfig/libbrotlienc.pc
↓ 64 lines
ASSISTANT
Show reasoning

Now I need to build zstd. Let me compile it with the cross compiler.

compile-bench> cd /home/peter/build/zstd-1.5.6 && make -j$(nproc) CC=aarch64-linux-gnu-gcc AR=aarch64-linux-gnu-ar PREFIX=/home/peter/sysroot lib-nomt
make[1]: Entering directory '/home/peter/build/zstd-1.5.6/lib'
creating pkgconfig
CC obj/conf_866fc2d89c4c104b8c3d4c2da849709e/dynamic/debug.o
CC obj/conf_866fc2d89c4c104b8c3d4c2da849709e/dynamic/entropy_common.o
CC obj/conf_866fc2d89c4c104b8c3d4c2da849709e/dynamic/error_private.o
CC obj/conf_866fc2d89c4c104b8c3d4c2da849709e/dynamic/fse_decompress.o
CC obj/conf_866fc2d89c4c104b8c3d4c2da849709e/dynamic/pool.o
CC obj/conf_866fc2d89c4c104b8c3d4c2da849709e/dynamic/threading.o
CC obj/conf_866fc2d89c4c104b8c3d4c2da849709e/dynamic/xxhash.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/debug.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/entropy_common.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/error_private.o
CC obj/conf_866fc2d89c4c104b8c3d4c2da849709e/dynamic/zstd_common.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/fse_decompress.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/pool.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/threading.o
CC obj/conf_866fc2d89c4c104b8c3d4c2da849709e/dynamic/zstd_v05.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/xxhash.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/zstd_common.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/zstd_v05.o
CC obj/conf_866fc2d89c4c104b8c3d4c2da849709e/dynamic/zstd_v06.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/zstd_v06.o
CC obj/conf_866fc2d89c4c104b8c3d4c2da849709e/dynamic/zstd_v07.o
CC obj/conf_866fc2d89c4c104b8c3d4c2da849709e/dynamic/fse_compress.o
CC obj/conf_866fc2d89c4c104b8c3d4c2da849709e/dynamic/hist.o
CC obj/conf_866fc2d89c4c104b8c3d4c2da849709e/dynamic/huf_compress.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/zstd_v07.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/fse_compress.o
CC obj/conf_866fc2d89c4c104b8c3d4c2da849709e/dynamic/zstd_compress.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/hist.o
CC obj/conf_866fc2d89c4c104b8c3d4c2da849709e/dynamic/zstd_compress_literals.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/huf_compress.o
CC obj/conf_866fc2d89c4c104b8c3d4c2da849709e/dynamic/zstd_compress_sequences.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/zstd_compress.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/zstd_compress_literals.o
CC obj/conf_866fc2d89c4c104b8c3d4c2da849709e/dynamic/zstd_compress_superblock.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/zstd_compress_sequences.o
CC obj/conf_866fc2d89c4c104b8c3d4c2da849709e/dynamic/zstd_double_fast.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/zstd_compress_superblock.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/zstd_double_fast.o
CC obj/conf_866fc2d89c4c104b8c3d4c2da849709e/dynamic/zstd_fast.o
CC obj/conf_866fc2d89c4c104b8c3d4c2da849709e/dynamic/zstd_lazy.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/zstd_fast.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/zstd_lazy.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/zstd_ldm.o
CC obj/conf_866fc2d89c4c104b8c3d4c2da849709e/dynamic/zstd_ldm.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/zstd_opt.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/zstdmt_compress.o
CC obj/conf_866fc2d89c4c104b8c3d4c2da849709e/dynamic/zstd_opt.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/huf_decompress.o
CC obj/conf_866fc2d89c4c104b8c3d4c2da849709e/dynamic/zstdmt_compress.o
CC obj/conf_866fc2d89c4c104b8c3d4c2da849709e/dynamic/huf_decompress.o
CC obj/conf_866fc2d89c4c104b8c3d4c2da849709e/dynamic/zstd_ddict.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/zstd_ddict.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/zstd_decompress.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/zstd_decompress_block.o
CC obj/conf_866fc2d89c4c104b8c3d4c2da849709e/dynamic/zstd_decompress.o
AS obj/conf_4dd13815c7e73e361421a2071f1b881b/static/huf_decompress_amd64.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/cover.o
CC obj/conf_866fc2d89c4c104b8c3d4c2da849709e/dynamic/zstd_decompress_block.o
AS obj/conf_866fc2d89c4c104b8c3d4c2da849709e/dynamic/huf_decompress_amd64.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/divsufsort.o
CC obj/conf_866fc2d89c4c104b8c3d4c2da849709e/dynamic/cover.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/fastcover.o
CC obj/conf_866fc2d89c4c104b8c3d4c2da849709e/dynamic/divsufsort.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/zdict.o
CC obj/conf_866fc2d89c4c104b8c3d4c2da849709e/dynamic/fastcover.o
CC obj/conf_866fc2d89c4c104b8c3d4c2da849709e/dynamic/zdict.o
compiling single-threaded dynamic library 1.5.6
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: warning: -z cet-report=error ignored
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: warning: -z cet-report=error ignored
creating versioned links
compiling single-threaded static library 1.5.6
single-threaded build completed
make[1]: Leaving directory '/home/peter/build/zstd-1.5.6/lib'
↓ 76 lines
ASSISTANT
Show reasoning

The zstd library has been built. Now I need to install it to the sysroot.

compile-bench> cd /home/peter/build/zstd-1.5.6 && make install PREFIX=/home/peter/sysroot
make[1]: Entering directory '/home/peter/build/zstd-1.5.6/lib'
Installing static library
Installing shared library
Installing includes
zstd static and shared library installed
make[1]: Leaving directory '/home/peter/build/zstd-1.5.6/lib'
make[1]: Entering directory '/home/peter/build/zstd-1.5.6/programs'
make[2]: Entering directory '/home/peter/build/zstd-1.5.6/programs'
CC obj/conf_bf1b34ae12dd179329942d741e05c81e/debug.o
CC obj/conf_bf1b34ae12dd179329942d741e05c81e/entropy_common.o
CC obj/conf_bf1b34ae12dd179329942d741e05c81e/error_private.o
CC obj/conf_bf1b34ae12dd179329942d741e05c81e/fse_decompress.o
CC obj/conf_bf1b34ae12dd179329942d741e05c81e/pool.o
CC obj/conf_bf1b34ae12dd179329942d741e05c81e/threading.o
CC obj/conf_bf1b34ae12dd179329942d741e05c81e/xxhash.o
CC obj/conf_bf1b34ae12dd179329942d741e05c81e/zstd_common.o
CC obj/conf_bf1b34ae12dd179329942d741e05c81e/fse_compress.o
CC obj/conf_bf1b34ae12dd179329942d741e05c81e/hist.o
CC obj/conf_bf1b34ae12dd179329942d741e05c81e/huf_compress.o
CC obj/conf_bf1b34ae12dd179329942d741e05c81e/zstd_compress.o
CC obj/conf_bf1b34ae12dd179329942d741e05c81e/zstd_compress_literals.o
CC obj/conf_bf1b34ae12dd179329942d741e05c81e/zstd_compress_sequences.o
CC obj/conf_bf1b34ae12dd179329942d741e05c81e/zstd_compress_superblock.o
CC obj/conf_bf1b34ae12dd179329942d741e05c81e/zstd_double_fast.o
CC obj/conf_bf1b34ae12dd179329942d741e05c81e/zstd_fast.o
CC obj/conf_bf1b34ae12dd179329942d741e05c81e/zstd_lazy.o
CC obj/conf_bf1b34ae12dd179329942d741e05c81e/zstd_ldm.o
CC obj/conf_bf1b34ae12dd179329942d741e05c81e/zstd_opt.o
CC obj/conf_bf1b34ae12dd179329942d741e05c81e/zstdmt_compress.o
CC obj/conf_bf1b34ae12dd179329942d741e05c81e/huf_decompress.o
AS obj/conf_bf1b34ae12dd179329942d741e05c81e/huf_decompress_amd64.o
CC obj/conf_bf1b34ae12dd179329942d741e05c81e/zstd_ddict.o
CC obj/conf_bf1b34ae12dd179329942d741e05c81e/zstd_decompress.o
CC obj/conf_bf1b34ae12dd179329942d741e05c81e/zstd_decompress_block.o
CC obj/conf_bf1b34ae12dd179329942d741e05c81e/cover.o
CC obj/conf_bf1b34ae12dd179329942d741e05c81e/divsufsort.o
CC obj/conf_bf1b34ae12dd179329942d741e05c81e/fastcover.o
CC obj/conf_bf1b34ae12dd179329942d741e05c81e/zdict.o
CC obj/conf_bf1b34ae12dd179329942d741e05c81e/zstd_v05.o
CC obj/conf_bf1b34ae12dd179329942d741e05c81e/zstd_v06.o
CC obj/conf_bf1b34ae12dd179329942d741e05c81e/zstd_v07.o
CC obj/conf_bf1b34ae12dd179329942d741e05c81e/benchfn.o
CC obj/conf_bf1b34ae12dd179329942d741e05c81e/benchzstd.o
CC obj/conf_bf1b34ae12dd179329942d741e05c81e/datagen.o
CC obj/conf_bf1b34ae12dd179329942d741e05c81e/dibio.o
CC obj/conf_bf1b34ae12dd179329942d741e05c81e/fileio.o
CC obj/conf_bf1b34ae12dd179329942d741e05c81e/fileio_asyncio.o
CC obj/conf_bf1b34ae12dd179329942d741e05c81e/lorem.o
CC obj/conf_bf1b34ae12dd179329942d741e05c81e/timefn.o
CC obj/conf_bf1b34ae12dd179329942d741e05c81e/util.o
CC obj/conf_bf1b34ae12dd179329942d741e05c81e/zstdcli.o
CC obj/conf_bf1b34ae12dd179329942d741e05c81e/zstdcli_trace.o
==> building with threading support
==> no zlib, building zstd without .gz support
==> no liblzma, building zstd without .xz/.lzma support
==> no liblz4, building zstd without .lz4 support
LINK obj/conf_bf1b34ae12dd179329942d741e05c81e/zstd
zstd build completed
make[2]: Leaving directory '/home/peter/build/zstd-1.5.6/programs'
Installing binaries
Installing man pages
zstd installation completed
make[1]: Leaving directory '/home/peter/build/zstd-1.5.6/programs'
↓ 64 lines
ASSISTANT
Show reasoning

Good! Now I have all the dependencies built and installed in /home/peter/sysroot. Let me now build curl with static linking. I need to configure curl to:
1. Cross-compile for arm64
2. Use static libraries
3. Enable SSL (OpenSSL)
4. Enable brotli
5. Enable zlib
6. Enable zstd
7. Make it fully static

Let me configure and build curl now.

compile-bench> cd /home/peter/curl-8.16.0 && PKG_CONFIG_PATH=/home/peter/sysroot/lib/pkgconfig ./configure --host=aarch64-linux-gnu --prefix=/home/peter/result --with-openssl=/home/peter/sysroot --with-zlib=/home/peter/sysroot --with-brotli=/home/peter/sysroot --with-zstd=/home/peter/sysroot --disable-shared --enable-static --disable-ldap --disable-ldaps --enable-ipv6 LDFLAGS="-static -L/home/peter/sysroot/lib" CPPFLAGS="-I/home/peter/sysroot/include"
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for aarch64-linux-gnu-ar... /usr/bin/aarch64-linux-gnu-ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for aarch64-linux-gnu-gcc... aarch64-linux-gnu-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether aarch64-linux-gnu-gcc accepts -g... yes
checking for aarch64-linux-gnu-gcc option to enable C11 features... none needed
checking whether aarch64-linux-gnu-gcc understands -c and -o together... yes
checking how to run the C preprocessor... aarch64-linux-gnu-gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for aarch64-linux-gnu-strip... aarch64-linux-gnu-strip
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of aarch64-linux-gnu-gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... aar
[command output truncated]
r to support mqtt... no
checking whether to provide built-in manual... yes
checking whether to build documentation... yes
checking whether to enable generation of C code... yes
checking whether to use libgcc... no
checking if X/Open network library is required... no
checking for gethostbyname... yes
checking whether build target is a native Windows one... (cached) no
checking for proto/bsdsocket.h... no
checking for connect in libraries... yes
checking for sys/types.h... (cached) yes
checking for monotonic clock_gettime... yes
checking for clock_gettime in libraries... no additional lib required
checking for sys/types.h... (cached) yes
checking for raw monotonic clock_gettime... yes
checking for zlib.h... yes
checking for gzread in -lz... yes
configure: found both libz and libz.h header
checking for BrotliDecoderDecompress in -lbrotlidec... yes
checking for brotli/decode.h... yes
checking for ZSTD_createDStream in -lzstd... yes
checking for zstd.h... yes
checking whether to enable IPv6... yes
checking if struct sockaddr_in6 has sin6_scope_id member... yes
checking if argv can be written to... no
configure: WARNING: the previous check could not be made default was used
checking if GSS-API support is requested... no
checking whether to enable Windows native SSL/TLS... no
checking whether to enable Amiga native SSL/TLS (AmiSSL v5)... no
configure: PKG_CONFIG_LIBDIR will be set to "/home/peter/sysroot/lib/pkgconfig"
checking for aarch64-linux-gnu-pkg-config... no
checking for pkg-config... /usr/bin/pkg-config
checking for openssl options with pkg-config... found
configure: pkg-config: SSL_LIBS: "-lssl -lcrypto"
configure: pkg-config: SSL_LDFLAGS: "-L/home/peter/sysroot/lib"
configure: pkg-config: SSL_CPPFLAGS: "-I/home/peter/sysroot/include"
checking for HMAC_Update in -lcrypto... yes
checking for SSL_connect in -lssl... yes
checking for openssl/x509.h... yes
checking for openssl/rsa.h... yes
checking for openssl/crypto.h... yes
checking for openssl/pem.h... yes
checking for openssl/ssl.h... yes
checking for openssl/err.h... yes
checking for BoringSSL... no
checking for AWS-LC... no
checking for LibreSSL... no
checking for OpenSSL >= v3... yes
checking for SSL_set_quic_use_legacy_codepoint... no
checking for SSL_set_quic_tls_cbs... no
configure: OpenSSL version does not speak any known QUIC API
checking for SRP support in OpenSSL... yes
checking for QUIC support and OpenSSL >= 3.3... no
configure: built with one SSL backend
checking default CA cert bundle/path... configure: WARNING: skipped the ca-cert path detection when cross-compiling
no
checking whether to use OpenSSL's built-in CA store... no
checking CA cert bundle path to embed in the curl tool... no
checking for aarch64-linux-gnu-pkg-config... /usr/bin/pkg-config
checking for libpsl options with pkg-config... no
checking for psl_builtin in -lpsl... no
configure: error: libpsl libs and/or directories were not found where specified!
↓ 128 lines
ASSISTANT
Show reasoning

The configure script is looking for libpsl but not finding it. I need to either build libpsl or disable it. Since the user didn't request it, I'll disable it with --without-libpsl.

compile-bench> cd /home/peter/curl-8.16.0 && PKG_CONFIG_PATH=/home/peter/sysroot/lib/pkgconfig ./configure --host=aarch64-linux-gnu --prefix=/home/peter/result --with-openssl=/home/peter/sysroot --with-zlib=/home/peter/sysroot --with-brotli=/home/peter/sysroot --with-zstd=/home/peter/sysroot --disable-shared --enable-static --disable-ldap --disable-ldaps --enable-ipv6 --without-libpsl --without-libidn2 --with-ca-bundle=/etc/ssl/certs/ca-certificates.crt LDFLAGS="-static -L/home/peter/sysroot/lib" CPPFLAGS="-I/home/peter/sysroot/include"
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for aarch64-linux-gnu-ar... /usr/bin/aarch64-linux-gnu-ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for aarch64-linux-gnu-gcc... aarch64-linux-gnu-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether aarch64-linux-gnu-gcc accepts -g... yes
checking for aarch64-linux-gnu-gcc option to enable C11 features... none needed
checking whether aarch64-linux-gnu-gcc understands -c and -o together... yes
checking how to run the C preprocessor... aarch64-linux-gnu-gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for aarch64-linux-gnu-strip... aarch64-linux-gnu-strip
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of aarch64-linux-gnu-gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... aar
[command output truncated]
-config
config.status: creating lib/curl_config.h
config.status: executing depfiles commands
config.status: executing libtool commands
configure: Configured to build curl/libcurl:

  Host setup:       aarch64-unknown-linux-gnu
  Install prefix:   /home/peter/result
  Compiler:         aarch64-linux-gnu-gcc
   CFLAGS:          -Werror-implicit-function-declaration -O2 -Wno-system-headers
   CFLAGS extras:   
   CPPFLAGS:        -isystem /home/peter/sysroot/include -D_GNU_SOURCE -isystem /home/peter/sysroot/include -isystem /home/peter/sysroot/include -isystem /home/peter/sysroot/include -isystem /home/peter/sysroot/include
   LDFLAGS:         -static -L/home/peter/sysroot/lib -L/home/peter/sysroot/lib -L/home/peter/sysroot/lib -L/home/peter/sysroot/lib -L/home/peter/sysroot/lib
     curl-config:   -L/home/peter/sysroot/lib -L/home/peter/sysroot/lib -L/home/peter/sysroot/lib -L/home/peter/sysroot/lib
   LIBS:            -lssl -lcrypto -lssl -lcrypto -lzstd -lzstd -lbrotlidec -lbrotlidec -lbrotlicommon -lz

  curl version:     8.16.0
  SSL:              enabled (OpenSSL v3+)
  SSH:              no      (--with-{libssh,libssh2})
  zlib:             enabled
  brotli:           enabled (libbrotlidec)
  zstd:             enabled (libzstd)
  GSS-API:          no      (--with-gssapi)
  GSASL:            no      (libgsasl not found)
  TLS-SRP:          enabled
  resolver:         POSIX threaded
  IPv6:             enabled
  Unix sockets:     enabled
  IDN:              no      (--with-{libidn2,winidn})
  Build docs:       enabled (--disable-docs)
  Build libcurl:    Shared=no, Static=yes
  Built-in manual:  enabled
  --libcurl option: enabled (--disable-libcurl-option)
  Verbose errors:   enabled (--disable-verbose)
  Code coverage:    disabled
  SSPI:             no      (--enable-sspi)
  ca cert bundle:   /etc/ssl/certs/ca-certificates.crt
  ca cert path:     no
  ca cert embed:    no
  ca fallback:      no
  LDAP:             no      (--enable-ldap / --with-ldap-lib / --with-lber-lib)
  LDAPS:            no      (--enable-ldaps)
  IPFS/IPNS:        enabled
  RTSP:             enabled
  RTMP:             no      (--with-librtmp)
  PSL:              no      (--with-libpsl)
  Alt-svc:          enabled (--disable-alt-svc)
  Headers API:      enabled (--disable-headers-api)
  HSTS:             enabled (--disable-hsts)
  HTTP1:            enabled (internal)
  HTTP2:            no      (--with-nghttp2)
  HTTP3:            no      (--with-ngtcp2 --with-nghttp3, --with-quiche, --with-openssl-quic)
  ECH:              no      (--enable-ech)
  HTTPS RR:         no      (--enable-httpsrr)
  SSLS-EXPORT:      no      (--enable-ssls-export)
  Protocols:        dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
  Features:         alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM SSL threadsafe TLS-SRP UnixSockets zstd
↓ 123 lines
ASSISTANT
Show reasoning

Good, the configure succeeded. Now I need to build and install curl.

compile-bench> cd /home/peter/curl-8.16.0 && make -j$(nproc)
Making all in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make  all-am
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
  CC       libcurl_la-altsvc.lo
  CC       libcurl_la-amigaos.lo
  CC       libcurl_la-asyn-ares.lo
  CC       libcurl_la-asyn-base.lo
  CC       libcurl_la-asyn-thrdd.lo
  CC       libcurl_la-bufq.lo
  CC       libcurl_la-bufref.lo
  CC       libcurl_la-cf-h1-proxy.lo
  CC       libcurl_la-cf-h2-proxy.lo
  CC       libcurl_la-cf-haproxy.lo
  CC       libcurl_la-cf-https-connect.lo
  CC       libcurl_la-cf-ip-happy.lo
  CC       libcurl_la-cf-socket.lo
  CC       libcurl_la-cfilters.lo
  CC       libcurl_la-conncache.lo
  CC       libcurl_la-connect.lo
  CC       libcurl_la-content_encoding.lo
  CC       libcurl_la-cookie.lo
  CC       libcurl_la-cshutdn.lo
  CC       libcurl_la-curl_addrinfo.lo
  CC       libcurl_la-curl_des.lo
  CC       libcurl_la-curl_endian.lo
  CC       libcurl_la-curl_fnmatch.lo
  CC       libcurl_la-curl_get_line.lo
  CC       libcurl_la-curl_gethostname.lo
  CC       libcurl_la-curl_gssapi.lo
  CC       libcurl_la-curl_memrchr.lo
  CC       libcurl_la-curl_ntlm_core.lo
  CC       libcurl_la-curl_range.lo
  CC       libcurl_la-curl_rtmp.lo
  CC       libcurl_la-curl_sasl.lo
  CC       libcurl_la-curl_sha512_256.lo
  CC       libcurl_la-curl_sspi.lo
  CC       libcurl_la-curl_threads.lo
  CC       libcurl_la-curl_trc.lo
  CC       libcurl_la-cw-out.lo
  CC       libcurl_la-cw-pause.lo
  CC       libcurl_la-dict.lo
  CC       libcurl_la-doh.lo
  CC       libcurl_la-dynhds.lo
  CC       libcurl_la-easy.lo
  CC       libcurl_la-easygetopt.lo
  CC       libcurl_la-easyoptions.lo
  CC       libcurl_la-escape.lo
  CC       libcurl_la-fake_addrinfo.lo
  CC       libcurl_la-file.lo
  CC       libcurl_la-fileinfo.lo
  CC       libcurl_la-fopen.lo
  CC       libcurl_la-formdata.lo
  CC       libcurl_la-ftp.lo
  CC       libcurl_la-ftplistparser.lo
  CC       libcurl_la-getenv.lo
  CC       libcurl_la-getinfo.lo
  CC       libcurl_la-gopher.lo
  CC       libcurl_la-hash.lo
  CC       libcurl_la-headers.lo
  CC       libcurl_la-hmac.lo
  CC       libcurl_la-hostip.lo
  CC       libcurl_la-hostip4.lo
  CC       libcurl_la-hostip6.lo
  CC       libcurl_la-hsts.lo
  CC       libcurl_la-http.lo
  CC       libcurl_la-http1.lo
  CC       libcurl_la-http2.lo
  CC       libcurl_la-http_aws_sigv4.lo
  CC       libcurl_la-http_chunks.lo
[command output truncated]
  CC       curl-tool_stderr.o
  CC       curl-tool_strdup.o
  CC       curl-tool_urlglob.o
  CC       curl-tool_util.o
  CC       curl-tool_vms.o
  CC       curl-tool_writeout.o
  CC       curl-tool_writeout_json.o
  CC       curl-tool_xattr.o
  CC       curl-var.o
  HUGE     tool_hugehelp.c
echo '/* !checksrc! disable COPYRIGHT all */' > tool_ca_embed.c
echo 'extern const void *curl_ca_embed; const void *curl_ca_embed;' >> tool_ca_embed.c
  CC       curlinfo.o
  CC       libcurltool_la-config2setopts.lo
  CC       libcurltool_la-slist_wc.lo
  CC       libcurltool_la-terminal.lo
  CC       libcurltool_la-tool_bname.lo
  CC       libcurltool_la-tool_cb_dbg.lo
  CC       libcurltool_la-tool_cb_hdr.lo
  CC       libcurltool_la-tool_cb_prg.lo
  CC       libcurltool_la-tool_cb_rea.lo
  CC       libcurltool_la-tool_cb_see.lo
  CC       libcurltool_la-tool_cb_soc.lo
  CC       libcurltool_la-tool_cb_wrt.lo
  CC       libcurltool_la-tool_cfgable.lo
  CC       libcurltool_la-tool_dirhie.lo
  CC       libcurltool_la-tool_doswin.lo
  CC       libcurltool_la-tool_easysrc.lo
  CC       libcurltool_la-tool_filetime.lo
  CC       libcurltool_la-tool_findfile.lo
  CC       libcurltool_la-tool_formparse.lo
  CC       libcurltool_la-tool_getparam.lo
  CC       libcurltool_la-tool_getpass.lo
  CC       libcurltool_la-tool_help.lo
  CC       libcurltool_la-tool_helpers.lo
  CC       libcurltool_la-tool_ipfs.lo
  CC       libcurltool_la-tool_libinfo.lo
  CC       libcurltool_la-tool_listhelp.lo
  CC       libcurltool_la-tool_main.lo
  CC       libcurltool_la-tool_msgs.lo
  CC       libcurltool_la-tool_operate.lo
  CC       libcurltool_la-tool_operhlp.lo
  CC       libcurltool_la-tool_paramhlp.lo
  CC       libcurltool_la-tool_parsecfg.lo
  CC       libcurltool_la-tool_progress.lo
  CC       libcurltool_la-tool_setopt.lo
  CC       libcurltool_la-tool_ssls.lo
  CC       libcurltool_la-tool_stderr.lo
  CC       libcurltool_la-tool_strdup.lo
  CC       libcurltool_la-tool_urlglob.lo
  CC       libcurltool_la-tool_util.lo
  CC       libcurltool_la-tool_vms.lo
  CC       libcurltool_la-tool_writeout.lo
  CC       libcurltool_la-tool_writeout_json.lo
  CC       libcurltool_la-tool_xattr.lo
  CC       libcurltool_la-var.lo
  CC       curl-tool_hugehelp.o
  CC       curl-tool_ca_embed.o
  CCLD     curlinfo
  CCLD     libcurltool.la
  CCLD     curl
make[1]: Leaving directory '/home/peter/curl-8.16.0/src'
Making all in scripts
make[1]: Entering directory '/home/peter/curl-8.16.0/scripts'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/home/peter/curl-8.16.0/scripts'
make[1]: Entering directory '/home/peter/curl-8.16.0'
make[1]: Nothing to be done for 'all-am'.
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 141 lines
ASSISTANT
Show reasoning

Good! The compilation completed successfully. Now I need to install it to /home/peter/result and create the symlink as requested.

compile-bench> cd /home/peter/curl-8.16.0 && make install
Making install in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
 /usr/bin/mkdir -p '/home/peter/result/lib'
 /bin/bash ../libtool   --mode=install /usr/bin/install -c   libcurl.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libcurl.lai /home/peter/result/lib/libcurl.la
libtool: install: /usr/bin/install -c .libs/libcurl.a /home/peter/result/lib/libcurl.a
libtool: install: chmod 644 /home/peter/result/lib/libcurl.a
libtool: install: aarch64-linux-gnu-ranlib /home/peter/result/lib/libcurl.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /home/peter/result/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/peter/curl-8.16.0/lib'
make[1]: Leaving directory '/home/peter/curl-8.16.0/lib'
Making install in docs
make[1]: Entering directory '/home/peter/curl-8.16.0/docs'
Making install in .
make[2]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /usr/bin/install -c -m 644 curl-config.1 wcurl.1 '/home/peter/result/share/man/man1'
make[3]: Leaving directory '/home/peter/curl-8.16.0/docs'
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs'
Making install in cmdline-opts
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /usr/bin/install -c -m 644 curl.1 '/home/peter/result/share/man/man1'
make[3]: Leaving directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
Making install in libcurl
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
Making install in opts
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl/
[command output truncated]
ng directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/aclocal'
 /usr/bin/install -c -m 644 libcurl.m4 '/home/peter/result/share/aclocal'
 /usr/bin/mkdir -p '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_easy_cleanup.3 curl_easy_duphandle.3 curl_easy_escape.3 curl_easy_getinfo.3 curl_easy_header.3 curl_easy_init.3 curl_easy_nextheader.3 curl_easy_option_by_id.3 curl_easy_option_by_name.3 curl_easy_option_next.3 curl_easy_pause.3 curl_easy_perform.3 curl_easy_recv.3 curl_easy_reset.3 curl_easy_send.3 curl_easy_setopt.3 curl_easy_ssls_export.3 curl_easy_ssls_import.3 curl_easy_strerror.3 curl_easy_unescape.3 curl_easy_upkeep.3 curl_escape.3 curl_formadd.3 curl_formfree.3 curl_formget.3 curl_free.3 curl_getdate.3 curl_getenv.3 curl_global_cleanup.3 curl_global_init.3 curl_global_init_mem.3 curl_global_sslset.3 curl_global_trace.3 curl_mime_addpart.3 curl_mime_data.3 curl_mime_data_cb.3 curl_mime_encoder.3 curl_mime_filedata.3 curl_mime_filename.3 curl_mime_free.3 '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_mime_headers.3 curl_mime_init.3 curl_mime_name.3 curl_mime_subparts.3 curl_mime_type.3 curl_mprintf.3 curl_multi_add_handle.3 curl_multi_assign.3 curl_multi_cleanup.3 curl_multi_fdset.3 curl_multi_get_handles.3 curl_multi_get_offt.3 curl_multi_info_read.3 curl_multi_init.3 curl_multi_perform.3 curl_multi_poll.3 curl_multi_remove_handle.3 curl_multi_setopt.3 curl_multi_socket.3 curl_multi_socket_action.3 curl_multi_socket_all.3 curl_multi_strerror.3 curl_multi_timeout.3 curl_multi_wait.3 curl_multi_waitfds.3 curl_multi_wakeup.3 curl_pushheader_byname.3 curl_pushheader_bynum.3 curl_share_cleanup.3 curl_share_init.3 curl_share_setopt.3 curl_share_strerror.3 curl_slist_append.3 curl_slist_free_all.3 curl_strequal.3 curl_strnequal.3 curl_unescape.3 curl_url.3 curl_url_cleanup.3 curl_url_dup.3 '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_url_get.3 curl_url_set.3 curl_url_strerror.3 curl_version.3 curl_version_info.3 curl_ws_meta.3 curl_ws_recv.3 curl_ws_send.3 curl_ws_start_frame.3 libcurl-easy.3 libcurl-env-dbg.3 libcurl-env.3 libcurl-errors.3 libcurl-multi.3 libcurl-security.3 libcurl-share.3 libcurl-symbols.3 libcurl-thread.3 libcurl-tutorial.3 libcurl-url.3 libcurl-ws.3 libcurl.3 '/home/peter/result/share/man/man3'
make[6]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[4]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[3]: Leaving directory '/home/peter/curl-8.16.0'
make[2]: Leaving directory '/home/peter/curl-8.16.0'
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 72 lines
ASSISTANT
Show reasoning

The curl has been installed. Now I need to:
1. Create a symlink from /home/peter/result/curl to the actual binary
2. Verify the binary is statically compiled for arm64
3. Test it with qemu-aarch64-static to make sure curl https://google.com works

Let me first find where the binary is located and create the symlink.

compile-bench> ls -la /home/peter/result/bin/
total 6120
drwxr-xr-x 2 peter peter    4096 Sep 29 18:19 .
drwxr-xr-x 6 peter peter    4096 Sep 29 18:19 ..
-rwxr-xr-x 1 peter peter 6234456 Sep 29 18:19 curl
-rwxr-xr-x 1 peter peter    5648 Sep 29 18:19 curl-config
-rwxr-xr-x 1 peter peter   10622 Sep 29 18:19 wcurl
↓ 7 lines
ASSISTANT
Show reasoning

Good! The curl binary is built. Now I need to:
1. Create a symlink from /home/peter/result/curl to the actual binary
2. Verify it's statically compiled for arm64
3. Test it with qemu-aarch64-static to make sure curl https://google.com works

Let me check if it's actually a static arm64 binary first.

compile-bench> file /home/peter/result/bin/curl
/home/peter/result/bin/curl: ELF 64-bit LSB pie executable, ARM aarch64, version 1 (SYSV), dynamically linked, interpreter /lib/ld-linux-aarch64.so.1, BuildID[sha1]=d14c438eb7316cc17958d9d699a5ab0834a24da8, for GNU/Linux 3.7.0, not stripped
ASSISTANT
Show reasoning

The binary is dynamically linked, not statically linked as required. I need to fix the build to create a static binary. Let me rebuild with proper static linking flags.

compile-bench> cd /home/peter/curl-8.16.0 && make clean
Making clean in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
test -z "unitprotos.h" || rm -f unitprotos.h
test -z "libcurl.la" || rm -f libcurl.la
rm -f ./so_locations
rm -rf .libs _libs
rm -rf curlx/.libs curlx/_libs
rm -rf vauth/.libs vauth/_libs
rm -rf vquic/.libs vquic/_libs
rm -rf vssh/.libs vssh/_libs
rm -rf vtls/.libs vtls/_libs
test -z "libcurlu.la" || rm -f libcurlu.la
rm -f ./so_locations
rm -f *.o
rm -f curlx/*.o
rm -f curlx/*.lo
rm -f vauth/*.o
rm -f vauth/*.lo
rm -f vquic/*.o
rm -f vquic/*.lo
rm -f vssh/*.o
rm -f vssh/*.lo
rm -f vtls/*.o
rm -f vtls/*.lo
rm -f *.lo
make[1]: Leaving directory '/home/peter/curl-8.16.0/lib'
Making clean in docs
make[1]: Entering directory '/home/peter/curl-8.16.0/docs'
Making clean in .
make[2]: Entering directory '/home/peter/curl-8.16.0/docs'
test -z "mk-ca-bundle.1 curl-config.1 wcurl.1 runtests.1 testcurl.1" || rm -f mk-ca-bundle.1 curl-config.1 wcurl.1 runtests.1 testcurl.1
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs'
Making clean in cmdline-opts
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
test -z "curl.1 curl.txt" || rm -f curl.1 curl.txt
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
Making clean in libcurl
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
Making clean in opts
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
test -z "CURLINFO_ACTIVESOCKET.3 CURLINFO_APPCONNECT_TIME.3 CURLINFO_APPCONNECT_TIME_T.3 CURLINFO_CAINFO.3 CURLINFO_CAPATH.3 CURLINFO_CERTINFO.3 CURLINFO_CONDITION_UNMET.3 CURLINFO_CONNECT_TIME.3 CURLINFO_CONN_ID.3 CURLINFO_CONNECT_TIME_T.3 CURLINFO_CONTENT_LENGTH_DOWNLOAD.3 CURLINFO_CONTENT_LENGTH_DOWNLOAD_T.3 CURLINFO_CONTENT_LENGTH_UPLOAD.3 CURLINFO_CONTENT_LENGTH_UPLOAD_T.3 CURLINFO_CONTENT_TYPE.3 CURLINFO_COOKIELIST.3 CURLINFO_EARLYDATA_SENT_T.3 CURLINFO_EFFECTIVE_METHOD.3 CURLINFO_EFFECTIVE_URL.3 CURLINFO_FILETIME.3 CURLINFO_FILETIME_T.3 CURLINFO_FTP_ENTRY_PATH.3 CURLINFO_HEADER_SIZE.3 CURLINFO_HTTP_CONNECTCODE.3 CURLINFO_HTTP_VERSION.3 CURLINFO_HTTPAUTH_AVAIL.3 CURLINFO_HTTPAUTH_USED.3 CURLINFO_LASTSOCKET.3 CURLINFO_LOCAL_IP.3 CURLINFO_LOCAL_PORT.3 CURLINFO_NAMELOOKUP_TIME.3 CURLINFO_NAMELOOKUP_TIME_T.3 CURLINFO_NUM_CONNECTS.3 CURLINFO_OS_ERRNO.3 CURLINFO_PRETRANSFER_TIME.3 CURLINFO_PRETRANSFER_TIME_T.3 CURLINFO_POSTTRANSFER_TIME_T.3 CURLINFO_PRIMARY_IP.3 CURLINFO_PRIMARY_PORT.3 CURLINFO_PRIVATE.3 CURLINFO_PROTOCOL.3 CURLINFO_PROXY_ERROR.3 CURLINFO_PROXY_SSL_VERIFYRESULT.3 CURLINFO_PROXYAUTH_AVAIL.3 CURLINFO_PROXYAUTH_USED.3 CURLINFO_QUEUE_TIME_T.3 CURLINFO_REDIRECT_COUNT.3 CURLINFO_REDIRECT_TIME.3 CURLINFO_REDIRECT_TIME_T.3 CURLINFO_REDIRECT_URL.3 CURLINFO_REFERER.3 CURLINFO_REQUEST_SIZE.3 CURLINFO_RESPONSE_CODE.3 CURLINFO_RETRY_AFTER.3 CURLINFO_RTSP_CLIENT_CSEQ.3 CURLINFO_RTSP_CSEQ_RECV.3 CURLINFO_RTSP_SERVER_CSEQ.3 CURLINFO_RTSP_SESSION_ID.3 CUR
[command output truncated]
rt test-ca.crt test-ca.key test-localhost.crl test-localhost.crt test-localhost.key test-localhost.pem test-localhost.pub.der test-localhost.pub.pem test-localhost.nn.crl test-localhost.nn.crt test-localhost.nn.key test-localhost.nn.pem test-localhost.nn.pub.der test-localhost.nn.pub.pem test-localhost0h.crl test-localhost0h.crt test-localhost0h.key test-localhost0h.pem test-localhost0h.pub.der test-localhost0h.pub.pem test-localhost-san-first.crl test-localhost-san-first.crt test-localhost-san-first.key test-localhost-san-first.pem test-localhost-san-first.pub.der test-localhost-san-first.pub.pem test-localhost-san-last.crl test-localhost-san-last.crt test-localhost-san-last.key test-localhost-san-last.pem test-localhost-san-last.pub.der test-localhost-san-last.pub.pem test-client-cert.crl test-client-cert.crt test-client-cert.key test-client-cert.pem test-client-cert.pub.der test-client-cert.pub.pem \
  test-*.csr \
  test-*.der \
  test-*.keyenc \
  test-ca.cnt* \
  test-ca.db* \
  test-ca.raw* \
  test-ca.srl
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/certs'
Making clean in data
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/data'
rm -rf .libs _libs
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/data'
Making clean in server
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/server'
test -z "servers.c" || rm -f servers.c
rm -rf .libs _libs
rm -f servers
 rm -f servers
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/server'
Making clean in libtest
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/libtest'
test -z "libtests.c lib1521.c" || rm -f libtests.c lib1521.c
rm -rf .libs _libs
rm -f libtests
 rm -f libtests
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/libtest'
Making clean in http
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/http'
rm -rf .libs _libs
rm -rf *.pyc __pycache__
rm -rf gen
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/http'
Making clean in unit
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/unit'
test -z "units.c" || rm -f units.c
rm -rf .libs _libs
rm -f units
 rm -f units
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/unit'
Making clean in tunit
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/tunit'
test -z "tunits.c" || rm -f tunits.c
rm -rf .libs _libs
rm -f tunits
 rm -f tunits
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/tunit'
make[3]: Entering directory '/home/peter/curl-8.16.0/tests'
test -z ".http.pid .https.pid .ftp.pid .ftps.pid" || rm -f .http.pid .https.pid .ftp.pid .ftps.pid
rm -rf .libs _libs
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests'
make[2]: Leaving directory '/home/peter/curl-8.16.0/tests'
rm -f *.lo
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 113 lines
ASSISTANT
Show reasoning

The curl binary is not statically linked. I need to rebuild it with full static linking. Let me reconfigure and rebuild curl with proper static flags.

compile-bench> cd /home/peter/curl-8.16.0 && PKG_CONFIG_PATH=/home/peter/sysroot/lib/pkgconfig ./configure --host=aarch64-linux-gnu --prefix=/home/peter/result --with-openssl=/home/peter/sysroot --with-zlib=/home/peter/sysroot --with-brotli=/home/peter/sysroot --with-zstd=/home/peter/sysroot --disable-shared --enable-static --disable-ldap --disable-ldaps --enable-ipv6 --without-libpsl --without-libidn2 --with-ca-bundle=/etc/ssl/certs/ca-certificates.crt LDFLAGS="-static -L/home/peter/sysroot/lib" CPPFLAGS="-I/home/peter/sysroot/include" LIBS="-lssl -lcrypto -lzstd -lbrotlidec -lbrotlicommon -lz -lpthread -ldl"
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for aarch64-linux-gnu-ar... /usr/bin/aarch64-linux-gnu-ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for aarch64-linux-gnu-gcc... aarch64-linux-gnu-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether aarch64-linux-gnu-gcc accepts -g... yes
checking for aarch64-linux-gnu-gcc option to enable C11 features... none needed
checking whether aarch64-linux-gnu-gcc understands -c and -o together... yes
checking how to run the C preprocessor... aarch64-linux-gnu-gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for aarch64-linux-gnu-strip... aarch64-linux-gnu-strip
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of aarch64-linux-gnu-gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... aar
[command output truncated]
xecuting depfiles commands
config.status: executing libtool commands
configure: Configured to build curl/libcurl:

  Host setup:       aarch64-unknown-linux-gnu
  Install prefix:   /home/peter/result
  Compiler:         aarch64-linux-gnu-gcc
   CFLAGS:          -Werror-implicit-function-declaration -O2 -Wno-system-headers
   CFLAGS extras:   
   CPPFLAGS:        -isystem /home/peter/sysroot/include -D_GNU_SOURCE -isystem /home/peter/sysroot/include -isystem /home/peter/sysroot/include -isystem /home/peter/sysroot/include -isystem /home/peter/sysroot/include
   LDFLAGS:         -static -L/home/peter/sysroot/lib -L/home/peter/sysroot/lib -L/home/peter/sysroot/lib -L/home/peter/sysroot/lib -L/home/peter/sysroot/lib
     curl-config:   -L/home/peter/sysroot/lib -L/home/peter/sysroot/lib -L/home/peter/sysroot/lib -L/home/peter/sysroot/lib
   LIBS:            -lssl -lcrypto -lssl -lcrypto -lzstd -lzstd -lbrotlidec -lbrotlidec -lbrotlicommon -lz -lssl -lcrypto -lzstd -lbrotlidec -lbrotlicommon -lz -lpthread -ldl

  curl version:     8.16.0
  SSL:              enabled (OpenSSL v3+)
  SSH:              no      (--with-{libssh,libssh2})
  zlib:             enabled
  brotli:           enabled (libbrotlidec)
  zstd:             enabled (libzstd)
  GSS-API:          no      (--with-gssapi)
  GSASL:            no      (libgsasl not found)
  TLS-SRP:          enabled
  resolver:         POSIX threaded
  IPv6:             enabled
  Unix sockets:     enabled
  IDN:              no      (--with-{libidn2,winidn})
  Build docs:       enabled (--disable-docs)
  Build libcurl:    Shared=no, Static=yes
  Built-in manual:  enabled
  --libcurl option: enabled (--disable-libcurl-option)
  Verbose errors:   enabled (--disable-verbose)
  Code coverage:    disabled
  SSPI:             no      (--enable-sspi)
  ca cert bundle:   /etc/ssl/certs/ca-certificates.crt
  ca cert path:     no
  ca cert embed:    no
  ca fallback:      no
  LDAP:             no      (--enable-ldap / --with-ldap-lib / --with-lber-lib)
  LDAPS:            no      (--enable-ldaps)
  IPFS/IPNS:        enabled
  RTSP:             enabled
  RTMP:             no      (--with-librtmp)
  PSL:              no      (--with-libpsl)
  Alt-svc:          enabled (--disable-alt-svc)
  Headers API:      enabled (--disable-headers-api)
  HSTS:             enabled (--disable-hsts)
  HTTP1:            enabled (internal)
  HTTP2:            no      (--with-nghttp2)
  HTTP3:            no      (--with-ngtcp2 --with-nghttp3, --with-quiche, --with-openssl-quic)
  ECH:              no      (--enable-ech)
  HTTPS RR:         no      (--enable-httpsrr)
  SSLS-EXPORT:      no      (--enable-ssls-export)
  Protocols:        dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
  Features:         alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM SSL threadsafe TLS-SRP UnixSockets zstd
↓ 121 lines
ASSISTANT
Show reasoning

The build is configured now. I need to rebuild curl with fully static linking. Let me compile it again.

compile-bench> cd /home/peter/curl-8.16.0 && make -j$(nproc)
Making all in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make  all-am
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
  CC       vauth/libcurl_la-cleartext.lo
  CC       vauth/libcurl_la-cram.lo
  CC       vauth/libcurl_la-digest.lo
  CC       vauth/libcurl_la-digest_sspi.lo
  CC       vauth/libcurl_la-gsasl.lo
  CC       vauth/libcurl_la-krb5_gssapi.lo
  CC       vauth/libcurl_la-krb5_sspi.lo
  CC       vauth/libcurl_la-ntlm.lo
  CC       vauth/libcurl_la-ntlm_sspi.lo
  CC       vauth/libcurl_la-oauth2.lo
  CC       vauth/libcurl_la-spnego_gssapi.lo
  CC       vauth/libcurl_la-spnego_sspi.lo
  CC       vauth/libcurl_la-vauth.lo
  CC       vtls/libcurl_la-cipher_suite.lo
  CC       vtls/libcurl_la-gtls.lo
  CC       vtls/libcurl_la-hostcheck.lo
  CC       vtls/libcurl_la-keylog.lo
  CC       vtls/libcurl_la-mbedtls.lo
  CC       vtls/libcurl_la-mbedtls_threadlock.lo
  CC       vtls/libcurl_la-openssl.lo
  CC       vtls/libcurl_la-rustls.lo
  CC       vtls/libcurl_la-schannel.lo
  CC       vtls/libcurl_la-schannel_verify.lo
  CC       vtls/libcurl_la-vtls.lo
  CC       vtls/libcurl_la-vtls_scache.lo
  CC       vtls/libcurl_la-vtls_spack.lo
  CC       vtls/libcurl_la-wolfssl.lo
  CC       vtls/libcurl_la-x509asn1.lo
  CC       vquic/libcurl_la-curl_ngtcp2.lo
  CC       vquic/libcurl_la-curl_osslq.lo
  CC       vquic/libcurl_la-curl_quiche.lo
  CC       vquic/libcurl_la-vquic.lo
  CC       vquic/libcurl_la-vquic-tls.lo
  CC       vssh/libcurl_la-libssh.lo
  CC       vssh/libcurl_la-libssh2.lo
  CC       vssh/libcurl_la-curl_path.lo
  CC       vssh/libcurl_la-wolfssh.lo
  CC       curlx/libcurl_la-base64.lo
  CC       curlx/libcurl_la-dynbuf.lo
  CC       curlx/libcurl_la-inet_ntop.lo
  CC       curlx/libcurl_la-inet_pton.lo
  CC       curlx/libcurl_la-multibyte.lo
  CC       curlx/libcurl_la-nonblock.lo
  CC       curlx/libcurl_la-strparse.lo
  CC       curlx/libcurl_la-timediff.lo
  CC       curlx/libcurl_la-timeval.lo
  CC       curlx/libcurl_la-version_win32.lo
  CC       curlx/libcurl_la-wait.lo
  CC       curlx/libcurl_la-warnless.lo
  CC       curlx/libcurl_la-winapi.lo
  CC       libcurlu_la-altsvc.lo
  CC       libcurlu_la-amigaos.lo
  CC       libcurlu_la-asyn-ares.lo
  CC       libcurlu_la-asyn-base.lo
  CC       libcurlu_la-asyn-thrdd.lo
  CC       libcurlu_la-bufq.lo
  CC       libcurlu_la-bufref.lo
  CC       libcurlu_la-cf-h1-proxy.lo
  CC       libcurlu_la-cf-h2-proxy.lo
  CC       libcurlu_la-cf-haproxy.lo
  CC       libcurlu_la-cf-https-connect.lo
  CC       libcurlu_la-cf-ip-happy.lo
  CC       libcurlu_la-cf-socket.lo
  CC       libcurlu_la-cfilters.lo
  CC       libcurlu_la-conncache.lo
  CC       libcurlu_la-connect.lo
[command output truncated]
  CC       curl-tool_stderr.o
  CC       curl-tool_strdup.o
  CC       curl-tool_urlglob.o
  CC       curl-tool_util.o
  CC       curl-tool_vms.o
  CC       curl-tool_writeout.o
  CC       curl-tool_writeout_json.o
  CC       curl-tool_xattr.o
  CC       curl-var.o
  HUGE     tool_hugehelp.c
echo '/* !checksrc! disable COPYRIGHT all */' > tool_ca_embed.c
echo 'extern const void *curl_ca_embed; const void *curl_ca_embed;' >> tool_ca_embed.c
  CC       curlinfo.o
  CC       libcurltool_la-config2setopts.lo
  CC       libcurltool_la-slist_wc.lo
  CC       libcurltool_la-terminal.lo
  CC       libcurltool_la-tool_bname.lo
  CC       libcurltool_la-tool_cb_dbg.lo
  CC       libcurltool_la-tool_cb_hdr.lo
  CC       libcurltool_la-tool_cb_prg.lo
  CC       libcurltool_la-tool_cb_rea.lo
  CC       libcurltool_la-tool_cb_see.lo
  CC       libcurltool_la-tool_cb_soc.lo
  CC       libcurltool_la-tool_cb_wrt.lo
  CC       libcurltool_la-tool_cfgable.lo
  CC       libcurltool_la-tool_dirhie.lo
  CC       libcurltool_la-tool_doswin.lo
  CC       libcurltool_la-tool_easysrc.lo
  CC       libcurltool_la-tool_filetime.lo
  CC       libcurltool_la-tool_findfile.lo
  CC       libcurltool_la-tool_formparse.lo
  CC       libcurltool_la-tool_getparam.lo
  CC       libcurltool_la-tool_getpass.lo
  CC       libcurltool_la-tool_help.lo
  CC       libcurltool_la-tool_helpers.lo
  CC       libcurltool_la-tool_ipfs.lo
  CC       libcurltool_la-tool_libinfo.lo
  CC       libcurltool_la-tool_listhelp.lo
  CC       libcurltool_la-tool_main.lo
  CC       libcurltool_la-tool_msgs.lo
  CC       libcurltool_la-tool_operate.lo
  CC       libcurltool_la-tool_operhlp.lo
  CC       libcurltool_la-tool_paramhlp.lo
  CC       libcurltool_la-tool_parsecfg.lo
  CC       libcurltool_la-tool_progress.lo
  CC       libcurltool_la-tool_setopt.lo
  CC       libcurltool_la-tool_ssls.lo
  CC       libcurltool_la-tool_stderr.lo
  CC       libcurltool_la-tool_strdup.lo
  CC       libcurltool_la-tool_urlglob.lo
  CC       libcurltool_la-tool_util.lo
  CC       libcurltool_la-tool_vms.lo
  CC       libcurltool_la-tool_writeout.lo
  CC       libcurltool_la-tool_writeout_json.lo
  CC       libcurltool_la-tool_xattr.lo
  CC       libcurltool_la-var.lo
  CC       curl-tool_hugehelp.o
  CC       curl-tool_ca_embed.o
  CCLD     curlinfo
  CCLD     curl
  CCLD     libcurltool.la
make[1]: Leaving directory '/home/peter/curl-8.16.0/src'
Making all in scripts
make[1]: Entering directory '/home/peter/curl-8.16.0/scripts'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/home/peter/curl-8.16.0/scripts'
make[1]: Entering directory '/home/peter/curl-8.16.0'
make[1]: Nothing to be done for 'all-am'.
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 141 lines
ASSISTANT
Show reasoning

The build has completed. Now I need to install it again (since we cleaned it before) and verify that it's statically compiled this time.

compile-bench> cd /home/peter/curl-8.16.0 && make install
Making install in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
 /usr/bin/mkdir -p '/home/peter/result/lib'
 /bin/bash ../libtool   --mode=install /usr/bin/install -c   libcurl.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libcurl.lai /home/peter/result/lib/libcurl.la
libtool: install: /usr/bin/install -c .libs/libcurl.a /home/peter/result/lib/libcurl.a
libtool: install: chmod 644 /home/peter/result/lib/libcurl.a
libtool: install: aarch64-linux-gnu-ranlib /home/peter/result/lib/libcurl.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /home/peter/result/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/peter/curl-8.16.0/lib'
make[1]: Leaving directory '/home/peter/curl-8.16.0/lib'
Making install in docs
make[1]: Entering directory '/home/peter/curl-8.16.0/docs'
Making install in .
make[2]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /usr/bin/install -c -m 644 curl-config.1 wcurl.1 '/home/peter/result/share/man/man1'
make[3]: Leaving directory '/home/peter/curl-8.16.0/docs'
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs'
Making install in cmdline-opts
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /usr/bin/install -c -m 644 curl.1 '/home/peter/result/share/man/man1'
make[3]: Leaving directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
Making install in libcurl
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
Making install in opts
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl/
[command output truncated]
ng directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/aclocal'
 /usr/bin/install -c -m 644 libcurl.m4 '/home/peter/result/share/aclocal'
 /usr/bin/mkdir -p '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_easy_cleanup.3 curl_easy_duphandle.3 curl_easy_escape.3 curl_easy_getinfo.3 curl_easy_header.3 curl_easy_init.3 curl_easy_nextheader.3 curl_easy_option_by_id.3 curl_easy_option_by_name.3 curl_easy_option_next.3 curl_easy_pause.3 curl_easy_perform.3 curl_easy_recv.3 curl_easy_reset.3 curl_easy_send.3 curl_easy_setopt.3 curl_easy_ssls_export.3 curl_easy_ssls_import.3 curl_easy_strerror.3 curl_easy_unescape.3 curl_easy_upkeep.3 curl_escape.3 curl_formadd.3 curl_formfree.3 curl_formget.3 curl_free.3 curl_getdate.3 curl_getenv.3 curl_global_cleanup.3 curl_global_init.3 curl_global_init_mem.3 curl_global_sslset.3 curl_global_trace.3 curl_mime_addpart.3 curl_mime_data.3 curl_mime_data_cb.3 curl_mime_encoder.3 curl_mime_filedata.3 curl_mime_filename.3 curl_mime_free.3 '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_mime_headers.3 curl_mime_init.3 curl_mime_name.3 curl_mime_subparts.3 curl_mime_type.3 curl_mprintf.3 curl_multi_add_handle.3 curl_multi_assign.3 curl_multi_cleanup.3 curl_multi_fdset.3 curl_multi_get_handles.3 curl_multi_get_offt.3 curl_multi_info_read.3 curl_multi_init.3 curl_multi_perform.3 curl_multi_poll.3 curl_multi_remove_handle.3 curl_multi_setopt.3 curl_multi_socket.3 curl_multi_socket_action.3 curl_multi_socket_all.3 curl_multi_strerror.3 curl_multi_timeout.3 curl_multi_wait.3 curl_multi_waitfds.3 curl_multi_wakeup.3 curl_pushheader_byname.3 curl_pushheader_bynum.3 curl_share_cleanup.3 curl_share_init.3 curl_share_setopt.3 curl_share_strerror.3 curl_slist_append.3 curl_slist_free_all.3 curl_strequal.3 curl_strnequal.3 curl_unescape.3 curl_url.3 curl_url_cleanup.3 curl_url_dup.3 '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_url_get.3 curl_url_set.3 curl_url_strerror.3 curl_version.3 curl_version_info.3 curl_ws_meta.3 curl_ws_recv.3 curl_ws_send.3 curl_ws_start_frame.3 libcurl-easy.3 libcurl-env-dbg.3 libcurl-env.3 libcurl-errors.3 libcurl-multi.3 libcurl-security.3 libcurl-share.3 libcurl-symbols.3 libcurl-thread.3 libcurl-tutorial.3 libcurl-url.3 libcurl-ws.3 libcurl.3 '/home/peter/result/share/man/man3'
make[6]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[4]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[3]: Leaving directory '/home/peter/curl-8.16.0'
make[2]: Leaving directory '/home/peter/curl-8.16.0'
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 72 lines
ASSISTANT
Show reasoning

The build completed but we need to check if it's properly statically linked. Let me check the binary.

compile-bench> file /home/peter/result/bin/curl
/home/peter/result/bin/curl: ELF 64-bit LSB pie executable, ARM aarch64, version 1 (SYSV), dynamically linked, interpreter /lib/ld-linux-aarch64.so.1, BuildID[sha1]=d14c438eb7316cc17958d9d699a5ab0834a24da8, for GNU/Linux 3.7.0, not stripped
ASSISTANT
Show reasoning

The curl binary is still dynamically linked. I need to rebuild it with full static linking. Let me check what libraries it's linking against and then rebuild with better static options.

The issue is that even with -static LDFLAGS, it's still creating a dynamically linked binary. I need to ensure all dependencies are truly static and possibly use different configure options.

Let me try to rebuild with more explicit static configuration.

compile-bench> aarch64-linux-gnu-readelf -d /home/peter/result/bin/curl | grep NEEDED
 0x0000000000000001 (NEEDED)             Shared library: [libzstd.so.1]
 0x0000000000000001 (NEEDED)             Shared library: [libc.so.6]
 0x0000000000000001 (NEEDED)             Shared library: [ld-linux-aarch64.so.1]
↓ 4 lines
ASSISTANT
Show reasoning

The binary is not fully static - it still has dependencies on libzstd.so.1, libc.so.6, and ld-linux-aarch64.so.1. I need to compile it truly statically. The issue is that even though I specified -static in LDFLAGS, it seems some libraries are still being linked dynamically.

Let me rebuild with more aggressive static linking flags and make sure all dependencies are static.

compile-bench> cd /home/peter/curl-8.16.0 && make clean
Making clean in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
test -z "unitprotos.h" || rm -f unitprotos.h
test -z "libcurl.la" || rm -f libcurl.la
rm -f ./so_locations
rm -rf .libs _libs
rm -rf curlx/.libs curlx/_libs
rm -rf vauth/.libs vauth/_libs
rm -rf vquic/.libs vquic/_libs
rm -rf vssh/.libs vssh/_libs
rm -rf vtls/.libs vtls/_libs
test -z "libcurlu.la" || rm -f libcurlu.la
rm -f ./so_locations
rm -f *.o
rm -f curlx/*.o
rm -f curlx/*.lo
rm -f vauth/*.o
rm -f vauth/*.lo
rm -f vquic/*.o
rm -f vquic/*.lo
rm -f vssh/*.o
rm -f vssh/*.lo
rm -f vtls/*.o
rm -f vtls/*.lo
rm -f *.lo
make[1]: Leaving directory '/home/peter/curl-8.16.0/lib'
Making clean in docs
make[1]: Entering directory '/home/peter/curl-8.16.0/docs'
Making clean in .
make[2]: Entering directory '/home/peter/curl-8.16.0/docs'
test -z "mk-ca-bundle.1 curl-config.1 wcurl.1 runtests.1 testcurl.1" || rm -f mk-ca-bundle.1 curl-config.1 wcurl.1 runtests.1 testcurl.1
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs'
Making clean in cmdline-opts
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
test -z "curl.1 curl.txt" || rm -f curl.1 curl.txt
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
Making clean in libcurl
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
Making clean in opts
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
test -z "CURLINFO_ACTIVESOCKET.3 CURLINFO_APPCONNECT_TIME.3 CURLINFO_APPCONNECT_TIME_T.3 CURLINFO_CAINFO.3 CURLINFO_CAPATH.3 CURLINFO_CERTINFO.3 CURLINFO_CONDITION_UNMET.3 CURLINFO_CONNECT_TIME.3 CURLINFO_CONN_ID.3 CURLINFO_CONNECT_TIME_T.3 CURLINFO_CONTENT_LENGTH_DOWNLOAD.3 CURLINFO_CONTENT_LENGTH_DOWNLOAD_T.3 CURLINFO_CONTENT_LENGTH_UPLOAD.3 CURLINFO_CONTENT_LENGTH_UPLOAD_T.3 CURLINFO_CONTENT_TYPE.3 CURLINFO_COOKIELIST.3 CURLINFO_EARLYDATA_SENT_T.3 CURLINFO_EFFECTIVE_METHOD.3 CURLINFO_EFFECTIVE_URL.3 CURLINFO_FILETIME.3 CURLINFO_FILETIME_T.3 CURLINFO_FTP_ENTRY_PATH.3 CURLINFO_HEADER_SIZE.3 CURLINFO_HTTP_CONNECTCODE.3 CURLINFO_HTTP_VERSION.3 CURLINFO_HTTPAUTH_AVAIL.3 CURLINFO_HTTPAUTH_USED.3 CURLINFO_LASTSOCKET.3 CURLINFO_LOCAL_IP.3 CURLINFO_LOCAL_PORT.3 CURLINFO_NAMELOOKUP_TIME.3 CURLINFO_NAMELOOKUP_TIME_T.3 CURLINFO_NUM_CONNECTS.3 CURLINFO_OS_ERRNO.3 CURLINFO_PRETRANSFER_TIME.3 CURLINFO_PRETRANSFER_TIME_T.3 CURLINFO_POSTTRANSFER_TIME_T.3 CURLINFO_PRIMARY_IP.3 CURLINFO_PRIMARY_PORT.3 CURLINFO_PRIVATE.3 CURLINFO_PROTOCOL.3 CURLINFO_PROXY_ERROR.3 CURLINFO_PROXY_SSL_VERIFYRESULT.3 CURLINFO_PROXYAUTH_AVAIL.3 CURLINFO_PROXYAUTH_USED.3 CURLINFO_QUEUE_TIME_T.3 CURLINFO_REDIRECT_COUNT.3 CURLINFO_REDIRECT_TIME.3 CURLINFO_REDIRECT_TIME_T.3 CURLINFO_REDIRECT_URL.3 CURLINFO_REFERER.3 CURLINFO_REQUEST_SIZE.3 CURLINFO_RESPONSE_CODE.3 CURLINFO_RETRY_AFTER.3 CURLINFO_RTSP_CLIENT_CSEQ.3 CURLINFO_RTSP_CSEQ_RECV.3 CURLINFO_RTSP_SERVER_CSEQ.3 CURLINFO_RTSP_SESSION_ID.3 CUR
[command output truncated]
rt test-ca.crt test-ca.key test-localhost.crl test-localhost.crt test-localhost.key test-localhost.pem test-localhost.pub.der test-localhost.pub.pem test-localhost.nn.crl test-localhost.nn.crt test-localhost.nn.key test-localhost.nn.pem test-localhost.nn.pub.der test-localhost.nn.pub.pem test-localhost0h.crl test-localhost0h.crt test-localhost0h.key test-localhost0h.pem test-localhost0h.pub.der test-localhost0h.pub.pem test-localhost-san-first.crl test-localhost-san-first.crt test-localhost-san-first.key test-localhost-san-first.pem test-localhost-san-first.pub.der test-localhost-san-first.pub.pem test-localhost-san-last.crl test-localhost-san-last.crt test-localhost-san-last.key test-localhost-san-last.pem test-localhost-san-last.pub.der test-localhost-san-last.pub.pem test-client-cert.crl test-client-cert.crt test-client-cert.key test-client-cert.pem test-client-cert.pub.der test-client-cert.pub.pem \
  test-*.csr \
  test-*.der \
  test-*.keyenc \
  test-ca.cnt* \
  test-ca.db* \
  test-ca.raw* \
  test-ca.srl
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/certs'
Making clean in data
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/data'
rm -rf .libs _libs
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/data'
Making clean in server
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/server'
test -z "servers.c" || rm -f servers.c
rm -rf .libs _libs
rm -f servers
 rm -f servers
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/server'
Making clean in libtest
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/libtest'
test -z "libtests.c lib1521.c" || rm -f libtests.c lib1521.c
rm -rf .libs _libs
rm -f libtests
 rm -f libtests
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/libtest'
Making clean in http
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/http'
rm -rf .libs _libs
rm -rf *.pyc __pycache__
rm -rf gen
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/http'
Making clean in unit
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/unit'
test -z "units.c" || rm -f units.c
rm -rf .libs _libs
rm -f units
 rm -f units
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/unit'
Making clean in tunit
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/tunit'
test -z "tunits.c" || rm -f tunits.c
rm -rf .libs _libs
rm -f tunits
 rm -f tunits
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/tunit'
make[3]: Entering directory '/home/peter/curl-8.16.0/tests'
test -z ".http.pid .https.pid .ftp.pid .ftps.pid" || rm -f .http.pid .https.pid .ftp.pid .ftps.pid
rm -rf .libs _libs
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests'
make[2]: Leaving directory '/home/peter/curl-8.16.0/tests'
rm -f *.lo
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 113 lines
ASSISTANT
Show reasoning

The binary is still dynamically linked. I need to build zstd as a static library and ensure the curl binary is fully statically linked. Let me rebuild zstd to install only the static library, and then reconfigure curl with better LDFLAGS to ensure full static linking.

Let me first clean up and rebuild zstd properly with only static libraries.

compile-bench> cd /home/peter/build/zstd-1.5.6 && make clean
Cleaning completed
ASSISTANT
Show reasoning

The binary is still dynamically linked. I need to rebuild zstd as a static library and ensure curl is truly statically linked. Let me rebuild zstd properly for static linking.

compile-bench> cd /home/peter/build/zstd-1.5.6/lib && make -j$(nproc) CC=aarch64-linux-gnu-gcc AR=aarch64-linux-gnu-ar PREFIX=/home/peter/sysroot libzstd.a
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/debug.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/entropy_common.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/error_private.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/fse_decompress.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/pool.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/threading.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/xxhash.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/zstd_common.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/zstd_v05.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/zstd_v06.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/zstd_v07.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/fse_compress.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/hist.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/huf_compress.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/zstd_compress.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/zstd_compress_literals.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/zstd_compress_sequences.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/zstd_compress_superblock.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/zstd_double_fast.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/zstd_fast.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/zstd_lazy.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/zstd_ldm.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/zstd_opt.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/zstdmt_compress.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/huf_decompress.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/zstd_ddict.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/zstd_decompress.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/zstd_decompress_block.o
AS obj/conf_4dd13815c7e73e361421a2071f1b881b/static/huf_decompress_amd64.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/cover.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/divsufsort.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/fastcover.o
CC obj/conf_4dd13815c7e73e361421a2071f1b881b/static/zdict.o
compiling single-threaded static library 1.5.6
↓ 35 lines
ASSISTANT
Show reasoning

The user wants a fully static binary for arm64. The issue is that zstd is still dynamically linked. I need to ensure all libraries are static. Let me copy the static library to the sysroot and rebuild curl with full static linking.

compile-bench> cp /home/peter/build/zstd-1.5.6/lib/libzstd.a /home/peter/sysroot/lib/
[empty output]
ASSISTANT
Show reasoning

Good! Now I need to rebuild curl with proper static linking. Let me configure it to link everything statically. I need to use the correct LDFLAGS and make sure all libraries are linked statically.

compile-bench> cd /home/peter/curl-8.16.0 && PKG_CONFIG_PATH=/home/peter/sysroot/lib/pkgconfig ./configure --host=aarch64-linux-gnu --prefix=/home/peter/result --with-openssl=/home/peter/sysroot --with-zlib=/home/peter/sysroot --with-brotli=/home/peter/sysroot --with-zstd=/home/peter/sysroot --disable-shared --enable-static --disable-ldap --disable-ldaps --enable-ipv6 --without-libpsl --without-libidn2 --with-ca-bundle=/etc/ssl/certs/ca-certificates.crt LDFLAGS="-static -L/home/peter/sysroot/lib" CPPFLAGS="-I/home/peter/sysroot/include" LIBS="-lssl -lcrypto -lzstd -lbrotlidec -lbrotlicommon -lz -lpthread"
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for aarch64-linux-gnu-ar... /usr/bin/aarch64-linux-gnu-ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for aarch64-linux-gnu-gcc... aarch64-linux-gnu-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether aarch64-linux-gnu-gcc accepts -g... yes
checking for aarch64-linux-gnu-gcc option to enable C11 features... none needed
checking whether aarch64-linux-gnu-gcc understands -c and -o together... yes
checking how to run the C preprocessor... aarch64-linux-gnu-gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for aarch64-linux-gnu-strip... aarch64-linux-gnu-strip
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of aarch64-linux-gnu-gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... aar
[command output truncated]
us: executing depfiles commands
config.status: executing libtool commands
configure: Configured to build curl/libcurl:

  Host setup:       aarch64-unknown-linux-gnu
  Install prefix:   /home/peter/result
  Compiler:         aarch64-linux-gnu-gcc
   CFLAGS:          -Werror-implicit-function-declaration -O2 -Wno-system-headers
   CFLAGS extras:   
   CPPFLAGS:        -isystem /home/peter/sysroot/include -D_GNU_SOURCE -isystem /home/peter/sysroot/include -isystem /home/peter/sysroot/include -isystem /home/peter/sysroot/include -isystem /home/peter/sysroot/include
   LDFLAGS:         -static -L/home/peter/sysroot/lib -L/home/peter/sysroot/lib -L/home/peter/sysroot/lib -L/home/peter/sysroot/lib -L/home/peter/sysroot/lib
     curl-config:   -L/home/peter/sysroot/lib -L/home/peter/sysroot/lib -L/home/peter/sysroot/lib -L/home/peter/sysroot/lib
   LIBS:            -lssl -lcrypto -lssl -lcrypto -lzstd -lzstd -lbrotlidec -lbrotlidec -lbrotlicommon -lz -lssl -lcrypto -lzstd -lbrotlidec -lbrotlicommon -lz -lpthread

  curl version:     8.16.0
  SSL:              enabled (OpenSSL v3+)
  SSH:              no      (--with-{libssh,libssh2})
  zlib:             enabled
  brotli:           enabled (libbrotlidec)
  zstd:             enabled (libzstd)
  GSS-API:          no      (--with-gssapi)
  GSASL:            no      (libgsasl not found)
  TLS-SRP:          enabled
  resolver:         POSIX threaded
  IPv6:             enabled
  Unix sockets:     enabled
  IDN:              no      (--with-{libidn2,winidn})
  Build docs:       enabled (--disable-docs)
  Build libcurl:    Shared=no, Static=yes
  Built-in manual:  enabled
  --libcurl option: enabled (--disable-libcurl-option)
  Verbose errors:   enabled (--disable-verbose)
  Code coverage:    disabled
  SSPI:             no      (--enable-sspi)
  ca cert bundle:   /etc/ssl/certs/ca-certificates.crt
  ca cert path:     no
  ca cert embed:    no
  ca fallback:      no
  LDAP:             no      (--enable-ldap / --with-ldap-lib / --with-lber-lib)
  LDAPS:            no      (--enable-ldaps)
  IPFS/IPNS:        enabled
  RTSP:             enabled
  RTMP:             no      (--with-librtmp)
  PSL:              no      (--with-libpsl)
  Alt-svc:          enabled (--disable-alt-svc)
  Headers API:      enabled (--disable-headers-api)
  HSTS:             enabled (--disable-hsts)
  HTTP1:            enabled (internal)
  HTTP2:            no      (--with-nghttp2)
  HTTP3:            no      (--with-ngtcp2 --with-nghttp3, --with-quiche, --with-openssl-quic)
  ECH:              no      (--enable-ech)
  HTTPS RR:         no      (--enable-httpsrr)
  SSLS-EXPORT:      no      (--enable-ssls-export)
  Protocols:        dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
  Features:         alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM SSL threadsafe TLS-SRP UnixSockets zstd
↓ 121 lines
ASSISTANT
Show reasoning

Good, now let me compile curl again with the static zstd library.

compile-bench> cd /home/peter/curl-8.16.0 && make -j$(nproc)
Making all in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make  all-am
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
  CC       vauth/libcurl_la-cleartext.lo
  CC       vauth/libcurl_la-cram.lo
  CC       vauth/libcurl_la-digest.lo
  CC       vauth/libcurl_la-digest_sspi.lo
  CC       vauth/libcurl_la-gsasl.lo
  CC       vauth/libcurl_la-krb5_gssapi.lo
  CC       vauth/libcurl_la-krb5_sspi.lo
  CC       vauth/libcurl_la-ntlm.lo
  CC       vauth/libcurl_la-ntlm_sspi.lo
  CC       vauth/libcurl_la-oauth2.lo
  CC       vauth/libcurl_la-spnego_gssapi.lo
  CC       vauth/libcurl_la-spnego_sspi.lo
  CC       vauth/libcurl_la-vauth.lo
  CC       vtls/libcurl_la-cipher_suite.lo
  CC       vtls/libcurl_la-gtls.lo
  CC       vtls/libcurl_la-hostcheck.lo
  CC       vtls/libcurl_la-keylog.lo
  CC       vtls/libcurl_la-mbedtls.lo
  CC       vtls/libcurl_la-mbedtls_threadlock.lo
  CC       vtls/libcurl_la-openssl.lo
  CC       vtls/libcurl_la-rustls.lo
  CC       vtls/libcurl_la-schannel.lo
  CC       vtls/libcurl_la-schannel_verify.lo
  CC       vtls/libcurl_la-vtls.lo
  CC       vtls/libcurl_la-vtls_scache.lo
  CC       vtls/libcurl_la-vtls_spack.lo
  CC       vtls/libcurl_la-wolfssl.lo
  CC       vtls/libcurl_la-x509asn1.lo
  CC       vquic/libcurl_la-curl_ngtcp2.lo
  CC       vquic/libcurl_la-curl_osslq.lo
  CC       vquic/libcurl_la-curl_quiche.lo
  CC       vquic/libcurl_la-vquic.lo
  CC       vquic/libcurl_la-vquic-tls.lo
  CC       vssh/libcurl_la-libssh.lo
  CC       vssh/libcurl_la-libssh2.lo
  CC       vssh/libcurl_la-curl_path.lo
  CC       vssh/libcurl_la-wolfssh.lo
  CC       curlx/libcurl_la-base64.lo
  CC       curlx/libcurl_la-dynbuf.lo
  CC       curlx/libcurl_la-inet_ntop.lo
  CC       curlx/libcurl_la-inet_pton.lo
  CC       curlx/libcurl_la-multibyte.lo
  CC       curlx/libcurl_la-nonblock.lo
  CC       curlx/libcurl_la-strparse.lo
  CC       curlx/libcurl_la-timediff.lo
  CC       curlx/libcurl_la-timeval.lo
  CC       curlx/libcurl_la-version_win32.lo
  CC       curlx/libcurl_la-wait.lo
  CC       curlx/libcurl_la-warnless.lo
  CC       curlx/libcurl_la-winapi.lo
  CC       libcurlu_la-altsvc.lo
  CC       libcurlu_la-amigaos.lo
  CC       libcurlu_la-asyn-ares.lo
  CC       libcurlu_la-asyn-base.lo
  CC       libcurlu_la-asyn-thrdd.lo
  CC       libcurlu_la-bufq.lo
  CC       libcurlu_la-bufref.lo
  CC       libcurlu_la-cf-h1-proxy.lo
  CC       libcurlu_la-cf-h2-proxy.lo
  CC       libcurlu_la-cf-haproxy.lo
  CC       libcurlu_la-cf-https-connect.lo
  CC       libcurlu_la-cf-ip-happy.lo
  CC       libcurlu_la-cf-socket.lo
  CC       libcurlu_la-cfilters.lo
  CC       libcurlu_la-conncache.lo
  CC       libcurlu_la-connect.lo
[command output truncated]
  CC       curl-tool_stderr.o
  CC       curl-tool_strdup.o
  CC       curl-tool_urlglob.o
  CC       curl-tool_util.o
  CC       curl-tool_vms.o
  CC       curl-tool_writeout.o
  CC       curl-tool_writeout_json.o
  CC       curl-tool_xattr.o
  CC       curl-var.o
  HUGE     tool_hugehelp.c
echo '/* !checksrc! disable COPYRIGHT all */' > tool_ca_embed.c
echo 'extern const void *curl_ca_embed; const void *curl_ca_embed;' >> tool_ca_embed.c
  CC       curlinfo.o
  CC       libcurltool_la-config2setopts.lo
  CC       libcurltool_la-slist_wc.lo
  CC       libcurltool_la-terminal.lo
  CC       libcurltool_la-tool_bname.lo
  CC       libcurltool_la-tool_cb_dbg.lo
  CC       libcurltool_la-tool_cb_hdr.lo
  CC       libcurltool_la-tool_cb_prg.lo
  CC       libcurltool_la-tool_cb_rea.lo
  CC       libcurltool_la-tool_cb_see.lo
  CC       libcurltool_la-tool_cb_soc.lo
  CC       libcurltool_la-tool_cb_wrt.lo
  CC       libcurltool_la-tool_cfgable.lo
  CC       libcurltool_la-tool_dirhie.lo
  CC       libcurltool_la-tool_doswin.lo
  CC       libcurltool_la-tool_easysrc.lo
  CC       libcurltool_la-tool_filetime.lo
  CC       libcurltool_la-tool_findfile.lo
  CC       libcurltool_la-tool_formparse.lo
  CC       libcurltool_la-tool_getparam.lo
  CC       libcurltool_la-tool_getpass.lo
  CC       libcurltool_la-tool_help.lo
  CC       libcurltool_la-tool_helpers.lo
  CC       libcurltool_la-tool_ipfs.lo
  CC       libcurltool_la-tool_libinfo.lo
  CC       libcurltool_la-tool_listhelp.lo
  CC       libcurltool_la-tool_main.lo
  CC       libcurltool_la-tool_msgs.lo
  CC       libcurltool_la-tool_operate.lo
  CC       libcurltool_la-tool_operhlp.lo
  CC       libcurltool_la-tool_paramhlp.lo
  CC       libcurltool_la-tool_parsecfg.lo
  CC       libcurltool_la-tool_progress.lo
  CC       libcurltool_la-tool_setopt.lo
  CC       libcurltool_la-tool_ssls.lo
  CC       libcurltool_la-tool_stderr.lo
  CC       libcurltool_la-tool_strdup.lo
  CC       libcurltool_la-tool_urlglob.lo
  CC       libcurltool_la-tool_util.lo
  CC       libcurltool_la-tool_vms.lo
  CC       libcurltool_la-tool_writeout.lo
  CC       libcurltool_la-tool_writeout_json.lo
  CC       libcurltool_la-tool_xattr.lo
  CC       libcurltool_la-var.lo
  CC       curl-tool_hugehelp.o
  CC       curl-tool_ca_embed.o
  CCLD     curlinfo
  CCLD     libcurltool.la
  CCLD     curl
make[1]: Leaving directory '/home/peter/curl-8.16.0/src'
Making all in scripts
make[1]: Entering directory '/home/peter/curl-8.16.0/scripts'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/home/peter/curl-8.16.0/scripts'
make[1]: Entering directory '/home/peter/curl-8.16.0'
make[1]: Nothing to be done for 'all-am'.
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 141 lines
ASSISTANT
Show reasoning

Let me check if the binary is now truly static:

compile-bench> file /home/peter/curl-8.16.0/src/.libs/curl
/home/peter/curl-8.16.0/src/.libs/curl: cannot open `/home/peter/curl-8.16.0/src/.libs/curl' (No such file or directory)
ASSISTANT
Show reasoning

Let me check what files were generated in the src directory.

compile-bench> ls -la /home/peter/curl-8.16.0/src/curl
-rwxr-xr-x 1 peter peter 6234456 Sep 29 18:21 /home/peter/curl-8.16.0/src/curl
ASSISTANT
Show reasoning

Good, the curl binary is built. Let me check if it's statically linked.

compile-bench> file /home/peter/curl-8.16.0/src/curl
/home/peter/curl-8.16.0/src/curl: ELF 64-bit LSB pie executable, ARM aarch64, version 1 (SYSV), dynamically linked, interpreter /lib/ld-linux-aarch64.so.1, BuildID[sha1]=d14c438eb7316cc17958d9d699a5ab0834a24da8, for GNU/Linux 3.7.0, not stripped
ASSISTANT
Show reasoning

The binary is still dynamically linked. I need to check what it's linking against and ensure it's truly static. Let me check the dependencies.

compile-bench> aarch64-linux-gnu-readelf -d /home/peter/curl-8.16.0/src/curl | grep NEEDED
 0x0000000000000001 (NEEDED)             Shared library: [libzstd.so.1]
 0x0000000000000001 (NEEDED)             Shared library: [libc.so.6]
 0x0000000000000001 (NEEDED)             Shared library: [ld-linux-aarch64.so.1]
↓ 4 lines
ASSISTANT
Show reasoning

The curl binary is still dynamically linked with libzstd.so.1, libc.so.6, and ld-linux-aarch64.so.1. The issue is that zstd is still linking dynamically. I need to ensure all libraries are truly statically linked.

Let me check the zstd installation and make sure we have a static library only.

The problem is likely that libzstd.so exists in the sysroot and is being picked up instead of the static library. I should remove the shared library from sysroot to force static linking.

compile-bench> ls -la /home/peter/sysroot/lib/libzstd*
-rw-r--r-- 1 peter peter 1045442 Sep 29 18:21 /home/peter/sysroot/lib/libzstd.a
lrwxrwxrwx 1 peter peter      16 Sep 29 18:18 /home/peter/sysroot/lib/libzstd.so -> libzstd.so.1.5.6
lrwxrwxrwx 1 peter peter      16 Sep 29 18:18 /home/peter/sysroot/lib/libzstd.so.1 -> libzstd.so.1.5.6
-rwxr-xr-x 1 peter peter  866560 Sep 29 18:18 /home/peter/sysroot/lib/libzstd.so.1.5.6
↓ 5 lines
ASSISTANT
Show reasoning

The issue is that the static library for zstd is being overridden by the shared library. I need to remove the shared libraries from the sysroot and ensure only static libraries are available.

Let me remove the shared libraries from zstd and try rebuilding curl.

compile-bench> rm /home/peter/sysroot/lib/libzstd.so*
[empty output]
ASSISTANT
Show reasoning

The issue is that libzstd has both static and shared libraries installed, and the linker is picking up the shared library even though we specify -static. Let me remove the shared library and rebuild curl.

I've already removed the shared libraries. Now let me clean and rebuild curl again.

compile-bench> cd /home/peter/curl-8.16.0 && make clean
Making clean in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
test -z "unitprotos.h" || rm -f unitprotos.h
test -z "libcurl.la" || rm -f libcurl.la
rm -f ./so_locations
rm -rf .libs _libs
rm -rf curlx/.libs curlx/_libs
rm -rf vauth/.libs vauth/_libs
rm -rf vquic/.libs vquic/_libs
rm -rf vssh/.libs vssh/_libs
rm -rf vtls/.libs vtls/_libs
test -z "libcurlu.la" || rm -f libcurlu.la
rm -f ./so_locations
rm -f *.o
rm -f curlx/*.o
rm -f curlx/*.lo
rm -f vauth/*.o
rm -f vauth/*.lo
rm -f vquic/*.o
rm -f vquic/*.lo
rm -f vssh/*.o
rm -f vssh/*.lo
rm -f vtls/*.o
rm -f vtls/*.lo
rm -f *.lo
make[1]: Leaving directory '/home/peter/curl-8.16.0/lib'
Making clean in docs
make[1]: Entering directory '/home/peter/curl-8.16.0/docs'
Making clean in .
make[2]: Entering directory '/home/peter/curl-8.16.0/docs'
test -z "mk-ca-bundle.1 curl-config.1 wcurl.1 runtests.1 testcurl.1" || rm -f mk-ca-bundle.1 curl-config.1 wcurl.1 runtests.1 testcurl.1
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs'
Making clean in cmdline-opts
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
test -z "curl.1 curl.txt" || rm -f curl.1 curl.txt
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
Making clean in libcurl
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
Making clean in opts
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
test -z "CURLINFO_ACTIVESOCKET.3 CURLINFO_APPCONNECT_TIME.3 CURLINFO_APPCONNECT_TIME_T.3 CURLINFO_CAINFO.3 CURLINFO_CAPATH.3 CURLINFO_CERTINFO.3 CURLINFO_CONDITION_UNMET.3 CURLINFO_CONNECT_TIME.3 CURLINFO_CONN_ID.3 CURLINFO_CONNECT_TIME_T.3 CURLINFO_CONTENT_LENGTH_DOWNLOAD.3 CURLINFO_CONTENT_LENGTH_DOWNLOAD_T.3 CURLINFO_CONTENT_LENGTH_UPLOAD.3 CURLINFO_CONTENT_LENGTH_UPLOAD_T.3 CURLINFO_CONTENT_TYPE.3 CURLINFO_COOKIELIST.3 CURLINFO_EARLYDATA_SENT_T.3 CURLINFO_EFFECTIVE_METHOD.3 CURLINFO_EFFECTIVE_URL.3 CURLINFO_FILETIME.3 CURLINFO_FILETIME_T.3 CURLINFO_FTP_ENTRY_PATH.3 CURLINFO_HEADER_SIZE.3 CURLINFO_HTTP_CONNECTCODE.3 CURLINFO_HTTP_VERSION.3 CURLINFO_HTTPAUTH_AVAIL.3 CURLINFO_HTTPAUTH_USED.3 CURLINFO_LASTSOCKET.3 CURLINFO_LOCAL_IP.3 CURLINFO_LOCAL_PORT.3 CURLINFO_NAMELOOKUP_TIME.3 CURLINFO_NAMELOOKUP_TIME_T.3 CURLINFO_NUM_CONNECTS.3 CURLINFO_OS_ERRNO.3 CURLINFO_PRETRANSFER_TIME.3 CURLINFO_PRETRANSFER_TIME_T.3 CURLINFO_POSTTRANSFER_TIME_T.3 CURLINFO_PRIMARY_IP.3 CURLINFO_PRIMARY_PORT.3 CURLINFO_PRIVATE.3 CURLINFO_PROTOCOL.3 CURLINFO_PROXY_ERROR.3 CURLINFO_PROXY_SSL_VERIFYRESULT.3 CURLINFO_PROXYAUTH_AVAIL.3 CURLINFO_PROXYAUTH_USED.3 CURLINFO_QUEUE_TIME_T.3 CURLINFO_REDIRECT_COUNT.3 CURLINFO_REDIRECT_TIME.3 CURLINFO_REDIRECT_TIME_T.3 CURLINFO_REDIRECT_URL.3 CURLINFO_REFERER.3 CURLINFO_REQUEST_SIZE.3 CURLINFO_RESPONSE_CODE.3 CURLINFO_RETRY_AFTER.3 CURLINFO_RTSP_CLIENT_CSEQ.3 CURLINFO_RTSP_CSEQ_RECV.3 CURLINFO_RTSP_SERVER_CSEQ.3 CURLINFO_RTSP_SESSION_ID.3 CUR
[command output truncated]
rt test-ca.crt test-ca.key test-localhost.crl test-localhost.crt test-localhost.key test-localhost.pem test-localhost.pub.der test-localhost.pub.pem test-localhost.nn.crl test-localhost.nn.crt test-localhost.nn.key test-localhost.nn.pem test-localhost.nn.pub.der test-localhost.nn.pub.pem test-localhost0h.crl test-localhost0h.crt test-localhost0h.key test-localhost0h.pem test-localhost0h.pub.der test-localhost0h.pub.pem test-localhost-san-first.crl test-localhost-san-first.crt test-localhost-san-first.key test-localhost-san-first.pem test-localhost-san-first.pub.der test-localhost-san-first.pub.pem test-localhost-san-last.crl test-localhost-san-last.crt test-localhost-san-last.key test-localhost-san-last.pem test-localhost-san-last.pub.der test-localhost-san-last.pub.pem test-client-cert.crl test-client-cert.crt test-client-cert.key test-client-cert.pem test-client-cert.pub.der test-client-cert.pub.pem \
  test-*.csr \
  test-*.der \
  test-*.keyenc \
  test-ca.cnt* \
  test-ca.db* \
  test-ca.raw* \
  test-ca.srl
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/certs'
Making clean in data
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/data'
rm -rf .libs _libs
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/data'
Making clean in server
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/server'
test -z "servers.c" || rm -f servers.c
rm -rf .libs _libs
rm -f servers
 rm -f servers
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/server'
Making clean in libtest
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/libtest'
test -z "libtests.c lib1521.c" || rm -f libtests.c lib1521.c
rm -rf .libs _libs
rm -f libtests
 rm -f libtests
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/libtest'
Making clean in http
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/http'
rm -rf .libs _libs
rm -rf *.pyc __pycache__
rm -rf gen
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/http'
Making clean in unit
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/unit'
test -z "units.c" || rm -f units.c
rm -rf .libs _libs
rm -f units
 rm -f units
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/unit'
Making clean in tunit
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/tunit'
test -z "tunits.c" || rm -f tunits.c
rm -rf .libs _libs
rm -f tunits
 rm -f tunits
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/tunit'
make[3]: Entering directory '/home/peter/curl-8.16.0/tests'
test -z ".http.pid .https.pid .ftp.pid .ftps.pid" || rm -f .http.pid .https.pid .ftp.pid .ftps.pid
rm -rf .libs _libs
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests'
make[2]: Leaving directory '/home/peter/curl-8.16.0/tests'
rm -f *.lo
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 113 lines
ASSISTANT
Show reasoning

The issue is that the binary is still dynamically linked. The problem is that libzstd is being linked dynamically. I removed the .so files, now I need to reconfigure and rebuild.

Let me reconfigure and rebuild with the static library for zstd.

compile-bench> cd /home/peter/curl-8.16.0 && PKG_CONFIG_PATH=/home/peter/sysroot/lib/pkgconfig ./configure --host=aarch64-linux-gnu --prefix=/home/peter/result --with-openssl=/home/peter/sysroot --with-zlib=/home/peter/sysroot --with-brotli=/home/peter/sysroot --with-zstd=/home/peter/sysroot --disable-shared --enable-static --disable-ldap --disable-ldaps --enable-ipv6 --without-libpsl --without-libidn2 --with-ca-bundle=/etc/ssl/certs/ca-certificates.crt LDFLAGS="-static -L/home/peter/sysroot/lib" CPPFLAGS="-I/home/peter/sysroot/include" LIBS="-lssl -lcrypto -lzstd -lbrotlidec -lbrotlicommon -lz -lpthread"
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for aarch64-linux-gnu-ar... /usr/bin/aarch64-linux-gnu-ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for aarch64-linux-gnu-gcc... aarch64-linux-gnu-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether aarch64-linux-gnu-gcc accepts -g... yes
checking for aarch64-linux-gnu-gcc option to enable C11 features... none needed
checking whether aarch64-linux-gnu-gcc understands -c and -o together... yes
checking how to run the C preprocessor... aarch64-linux-gnu-gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for aarch64-linux-gnu-strip... aarch64-linux-gnu-strip
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of aarch64-linux-gnu-gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... aar
[command output truncated]
us: executing depfiles commands
config.status: executing libtool commands
configure: Configured to build curl/libcurl:

  Host setup:       aarch64-unknown-linux-gnu
  Install prefix:   /home/peter/result
  Compiler:         aarch64-linux-gnu-gcc
   CFLAGS:          -Werror-implicit-function-declaration -O2 -Wno-system-headers
   CFLAGS extras:   
   CPPFLAGS:        -isystem /home/peter/sysroot/include -D_GNU_SOURCE -isystem /home/peter/sysroot/include -isystem /home/peter/sysroot/include -isystem /home/peter/sysroot/include -isystem /home/peter/sysroot/include
   LDFLAGS:         -static -L/home/peter/sysroot/lib -L/home/peter/sysroot/lib -L/home/peter/sysroot/lib -L/home/peter/sysroot/lib -L/home/peter/sysroot/lib
     curl-config:   -L/home/peter/sysroot/lib -L/home/peter/sysroot/lib -L/home/peter/sysroot/lib -L/home/peter/sysroot/lib
   LIBS:            -lssl -lcrypto -lssl -lcrypto -lzstd -lzstd -lbrotlidec -lbrotlidec -lbrotlicommon -lz -lssl -lcrypto -lzstd -lbrotlidec -lbrotlicommon -lz -lpthread

  curl version:     8.16.0
  SSL:              enabled (OpenSSL v3+)
  SSH:              no      (--with-{libssh,libssh2})
  zlib:             enabled
  brotli:           enabled (libbrotlidec)
  zstd:             enabled (libzstd)
  GSS-API:          no      (--with-gssapi)
  GSASL:            no      (libgsasl not found)
  TLS-SRP:          enabled
  resolver:         POSIX threaded
  IPv6:             enabled
  Unix sockets:     enabled
  IDN:              no      (--with-{libidn2,winidn})
  Build docs:       enabled (--disable-docs)
  Build libcurl:    Shared=no, Static=yes
  Built-in manual:  enabled
  --libcurl option: enabled (--disable-libcurl-option)
  Verbose errors:   enabled (--disable-verbose)
  Code coverage:    disabled
  SSPI:             no      (--enable-sspi)
  ca cert bundle:   /etc/ssl/certs/ca-certificates.crt
  ca cert path:     no
  ca cert embed:    no
  ca fallback:      no
  LDAP:             no      (--enable-ldap / --with-ldap-lib / --with-lber-lib)
  LDAPS:            no      (--enable-ldaps)
  IPFS/IPNS:        enabled
  RTSP:             enabled
  RTMP:             no      (--with-librtmp)
  PSL:              no      (--with-libpsl)
  Alt-svc:          enabled (--disable-alt-svc)
  Headers API:      enabled (--disable-headers-api)
  HSTS:             enabled (--disable-hsts)
  HTTP1:            enabled (internal)
  HTTP2:            no      (--with-nghttp2)
  HTTP3:            no      (--with-ngtcp2 --with-nghttp3, --with-quiche, --with-openssl-quic)
  ECH:              no      (--enable-ech)
  HTTPS RR:         no      (--enable-httpsrr)
  SSLS-EXPORT:      no      (--enable-ssls-export)
  Protocols:        dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
  Features:         alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM SSL threadsafe TLS-SRP UnixSockets zstd
↓ 121 lines
ASSISTANT
Show reasoning

Let me now build curl again, but this time all the shared libraries should be removed from the sysroot, so it should build completely statically.

compile-bench> cd /home/peter/curl-8.16.0 && make -j$(nproc)
Making all in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make  all-am
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
  CC       vauth/libcurl_la-cleartext.lo
  CC       vauth/libcurl_la-cram.lo
  CC       vauth/libcurl_la-digest.lo
  CC       vauth/libcurl_la-digest_sspi.lo
  CC       vauth/libcurl_la-gsasl.lo
  CC       vauth/libcurl_la-krb5_gssapi.lo
  CC       vauth/libcurl_la-krb5_sspi.lo
  CC       vauth/libcurl_la-ntlm.lo
  CC       vauth/libcurl_la-ntlm_sspi.lo
  CC       vauth/libcurl_la-oauth2.lo
  CC       vauth/libcurl_la-spnego_gssapi.lo
  CC       vauth/libcurl_la-spnego_sspi.lo
  CC       vauth/libcurl_la-vauth.lo
  CC       vtls/libcurl_la-cipher_suite.lo
  CC       vtls/libcurl_la-gtls.lo
  CC       vtls/libcurl_la-hostcheck.lo
  CC       vtls/libcurl_la-keylog.lo
  CC       vtls/libcurl_la-mbedtls.lo
  CC       vtls/libcurl_la-mbedtls_threadlock.lo
  CC       vtls/libcurl_la-openssl.lo
  CC       vtls/libcurl_la-rustls.lo
  CC       vtls/libcurl_la-schannel.lo
  CC       vtls/libcurl_la-schannel_verify.lo
  CC       vtls/libcurl_la-vtls.lo
  CC       vtls/libcurl_la-vtls_scache.lo
  CC       vtls/libcurl_la-vtls_spack.lo
  CC       vtls/libcurl_la-wolfssl.lo
  CC       vtls/libcurl_la-x509asn1.lo
  CC       vquic/libcurl_la-curl_ngtcp2.lo
  CC       vquic/libcurl_la-curl_osslq.lo
  CC       vquic/libcurl_la-curl_quiche.lo
  CC       vquic/libcurl_la-vquic.lo
  CC       vquic/libcurl_la-vquic-tls.lo
  CC       vssh/libcurl_la-libssh.lo
  CC       vssh/libcurl_la-libssh2.lo
  CC       vssh/libcurl_la-curl_path.lo
  CC       vssh/libcurl_la-wolfssh.lo
  CC       curlx/libcurl_la-base64.lo
  CC       curlx/libcurl_la-dynbuf.lo
  CC       curlx/libcurl_la-inet_ntop.lo
  CC       curlx/libcurl_la-inet_pton.lo
  CC       curlx/libcurl_la-multibyte.lo
  CC       curlx/libcurl_la-nonblock.lo
  CC       curlx/libcurl_la-strparse.lo
  CC       curlx/libcurl_la-timediff.lo
  CC       curlx/libcurl_la-timeval.lo
  CC       curlx/libcurl_la-version_win32.lo
  CC       curlx/libcurl_la-wait.lo
  CC       curlx/libcurl_la-warnless.lo
  CC       curlx/libcurl_la-winapi.lo
  CC       libcurlu_la-altsvc.lo
  CC       libcurlu_la-amigaos.lo
  CC       libcurlu_la-asyn-ares.lo
  CC       libcurlu_la-asyn-base.lo
  CC       libcurlu_la-asyn-thrdd.lo
  CC       libcurlu_la-bufq.lo
  CC       libcurlu_la-bufref.lo
  CC       libcurlu_la-cf-h1-proxy.lo
  CC       libcurlu_la-cf-h2-proxy.lo
  CC       libcurlu_la-cf-haproxy.lo
  CC       libcurlu_la-cf-https-connect.lo
  CC       libcurlu_la-cf-ip-happy.lo
  CC       libcurlu_la-cf-socket.lo
  CC       libcurlu_la-cfilters.lo
  CC       libcurlu_la-conncache.lo
  CC       libcurlu_la-connect.lo
[command output truncated]
  CC       curl-tool_stderr.o
  CC       curl-tool_strdup.o
  CC       curl-tool_urlglob.o
  CC       curl-tool_util.o
  CC       curl-tool_vms.o
  CC       curl-tool_writeout.o
  CC       curl-tool_writeout_json.o
  CC       curl-tool_xattr.o
  CC       curl-var.o
  HUGE     tool_hugehelp.c
echo '/* !checksrc! disable COPYRIGHT all */' > tool_ca_embed.c
echo 'extern const void *curl_ca_embed; const void *curl_ca_embed;' >> tool_ca_embed.c
  CC       curlinfo.o
  CC       libcurltool_la-config2setopts.lo
  CC       libcurltool_la-slist_wc.lo
  CC       libcurltool_la-terminal.lo
  CC       libcurltool_la-tool_bname.lo
  CC       libcurltool_la-tool_cb_dbg.lo
  CC       libcurltool_la-tool_cb_hdr.lo
  CC       libcurltool_la-tool_cb_prg.lo
  CC       libcurltool_la-tool_cb_rea.lo
  CC       libcurltool_la-tool_cb_see.lo
  CC       libcurltool_la-tool_cb_soc.lo
  CC       libcurltool_la-tool_cb_wrt.lo
  CC       libcurltool_la-tool_cfgable.lo
  CC       libcurltool_la-tool_dirhie.lo
  CC       libcurltool_la-tool_doswin.lo
  CC       libcurltool_la-tool_easysrc.lo
  CC       libcurltool_la-tool_filetime.lo
  CC       libcurltool_la-tool_findfile.lo
  CC       libcurltool_la-tool_formparse.lo
  CC       libcurltool_la-tool_getparam.lo
  CC       libcurltool_la-tool_getpass.lo
  CC       libcurltool_la-tool_help.lo
  CC       libcurltool_la-tool_helpers.lo
  CC       libcurltool_la-tool_ipfs.lo
  CC       libcurltool_la-tool_libinfo.lo
  CC       libcurltool_la-tool_listhelp.lo
  CC       libcurltool_la-tool_main.lo
  CC       libcurltool_la-tool_msgs.lo
  CC       libcurltool_la-tool_operate.lo
  CC       libcurltool_la-tool_operhlp.lo
  CC       libcurltool_la-tool_paramhlp.lo
  CC       libcurltool_la-tool_parsecfg.lo
  CC       libcurltool_la-tool_progress.lo
  CC       libcurltool_la-tool_setopt.lo
  CC       libcurltool_la-tool_ssls.lo
  CC       libcurltool_la-tool_stderr.lo
  CC       libcurltool_la-tool_strdup.lo
  CC       libcurltool_la-tool_urlglob.lo
  CC       libcurltool_la-tool_util.lo
  CC       libcurltool_la-tool_vms.lo
  CC       libcurltool_la-tool_writeout.lo
  CC       libcurltool_la-tool_writeout_json.lo
  CC       libcurltool_la-tool_xattr.lo
  CC       libcurltool_la-var.lo
  CC       curl-tool_hugehelp.o
  CC       curl-tool_ca_embed.o
  CCLD     curlinfo
  CCLD     curl
  CCLD     libcurltool.la
make[1]: Leaving directory '/home/peter/curl-8.16.0/src'
Making all in scripts
make[1]: Entering directory '/home/peter/curl-8.16.0/scripts'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/home/peter/curl-8.16.0/scripts'
make[1]: Entering directory '/home/peter/curl-8.16.0'
make[1]: Nothing to be done for 'all-am'.
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 141 lines
ASSISTANT
Show reasoning

Let me check if the binary is now fully static.

compile-bench> file /home/peter/curl-8.16.0/src/curl
/home/peter/curl-8.16.0/src/curl: ELF 64-bit LSB pie executable, ARM aarch64, version 1 (SYSV), dynamically linked, interpreter /lib/ld-linux-aarch64.so.1, BuildID[sha1]=63402559031f759ad1493ea6d5af9c34038c8620, for GNU/Linux 3.7.0, not stripped
ASSISTANT
Show reasoning

The binary is still dynamically linked. I need to use different LDFLAGS to ensure a fully static build. Let me try with -all-static and additional flags.

compile-bench> aarch64-linux-gnu-readelf -d /home/peter/curl-8.16.0/src/curl 2>&1 | head -20
Dynamic section at offset 0x55ba18 contains 28 entries:
  Tag        Type                         Name/Value
 0x0000000000000001 (NEEDED)             Shared library: [libc.so.6]
 0x0000000000000001 (NEEDED)             Shared library: [ld-linux-aarch64.so.1]
 0x000000000000000c (INIT)               0x7cea8
 0x000000000000000d (FINI)               0x3a49c0
 0x0000000000000019 (INIT_ARRAY)         0x510c60
 0x000000000000001b (INIT_ARRAYSZ)       24 (bytes)
 0x000000000000001a (FINI_ARRAY)         0x510c78
 0x000000000000001c (FINI_ARRAYSZ)       8 (bytes)
 0x000000006ffffef5 (GNU_HASH)           0x298
 0x0000000000000005 (STRTAB)             0x1608
 0x0000000000000006 (SYMTAB)             0x2b8
 0x000000000000000a (STRSZ)              2133 (bytes)
 0x000000000000000b (SYMENT)             24 (bytes)
 0x0000000000000015 (DEBUG)              0x0
 0x0000000000000003 (PLTGOT)             0x56bc18
 0x0000000000000002 (PLTRELSZ)           4728 (bytes)
 0x0000000000000014 (PLTREL)             RELA
↓ 20 lines
ASSISTANT
Show reasoning

The binary is still dynamically linked. It only links to libc.so.6 and ld-linux-aarch64.so.1, so it seems the static libraries were linked in, but it's still not fully static. I need to pass the right flags to make it truly static.

Let me try to add -all-static to the LDFLAGS.

compile-bench> cd /home/peter/curl-8.16.0 && make clean
Making clean in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
test -z "unitprotos.h" || rm -f unitprotos.h
test -z "libcurl.la" || rm -f libcurl.la
rm -f ./so_locations
rm -rf .libs _libs
rm -rf curlx/.libs curlx/_libs
rm -rf vauth/.libs vauth/_libs
rm -rf vquic/.libs vquic/_libs
rm -rf vssh/.libs vssh/_libs
rm -rf vtls/.libs vtls/_libs
test -z "libcurlu.la" || rm -f libcurlu.la
rm -f ./so_locations
rm -f *.o
rm -f curlx/*.o
rm -f curlx/*.lo
rm -f vauth/*.o
rm -f vauth/*.lo
rm -f vquic/*.o
rm -f vquic/*.lo
rm -f vssh/*.o
rm -f vssh/*.lo
rm -f vtls/*.o
rm -f vtls/*.lo
rm -f *.lo
make[1]: Leaving directory '/home/peter/curl-8.16.0/lib'
Making clean in docs
make[1]: Entering directory '/home/peter/curl-8.16.0/docs'
Making clean in .
make[2]: Entering directory '/home/peter/curl-8.16.0/docs'
test -z "mk-ca-bundle.1 curl-config.1 wcurl.1 runtests.1 testcurl.1" || rm -f mk-ca-bundle.1 curl-config.1 wcurl.1 runtests.1 testcurl.1
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs'
Making clean in cmdline-opts
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
test -z "curl.1 curl.txt" || rm -f curl.1 curl.txt
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
Making clean in libcurl
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
Making clean in opts
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
test -z "CURLINFO_ACTIVESOCKET.3 CURLINFO_APPCONNECT_TIME.3 CURLINFO_APPCONNECT_TIME_T.3 CURLINFO_CAINFO.3 CURLINFO_CAPATH.3 CURLINFO_CERTINFO.3 CURLINFO_CONDITION_UNMET.3 CURLINFO_CONNECT_TIME.3 CURLINFO_CONN_ID.3 CURLINFO_CONNECT_TIME_T.3 CURLINFO_CONTENT_LENGTH_DOWNLOAD.3 CURLINFO_CONTENT_LENGTH_DOWNLOAD_T.3 CURLINFO_CONTENT_LENGTH_UPLOAD.3 CURLINFO_CONTENT_LENGTH_UPLOAD_T.3 CURLINFO_CONTENT_TYPE.3 CURLINFO_COOKIELIST.3 CURLINFO_EARLYDATA_SENT_T.3 CURLINFO_EFFECTIVE_METHOD.3 CURLINFO_EFFECTIVE_URL.3 CURLINFO_FILETIME.3 CURLINFO_FILETIME_T.3 CURLINFO_FTP_ENTRY_PATH.3 CURLINFO_HEADER_SIZE.3 CURLINFO_HTTP_CONNECTCODE.3 CURLINFO_HTTP_VERSION.3 CURLINFO_HTTPAUTH_AVAIL.3 CURLINFO_HTTPAUTH_USED.3 CURLINFO_LASTSOCKET.3 CURLINFO_LOCAL_IP.3 CURLINFO_LOCAL_PORT.3 CURLINFO_NAMELOOKUP_TIME.3 CURLINFO_NAMELOOKUP_TIME_T.3 CURLINFO_NUM_CONNECTS.3 CURLINFO_OS_ERRNO.3 CURLINFO_PRETRANSFER_TIME.3 CURLINFO_PRETRANSFER_TIME_T.3 CURLINFO_POSTTRANSFER_TIME_T.3 CURLINFO_PRIMARY_IP.3 CURLINFO_PRIMARY_PORT.3 CURLINFO_PRIVATE.3 CURLINFO_PROTOCOL.3 CURLINFO_PROXY_ERROR.3 CURLINFO_PROXY_SSL_VERIFYRESULT.3 CURLINFO_PROXYAUTH_AVAIL.3 CURLINFO_PROXYAUTH_USED.3 CURLINFO_QUEUE_TIME_T.3 CURLINFO_REDIRECT_COUNT.3 CURLINFO_REDIRECT_TIME.3 CURLINFO_REDIRECT_TIME_T.3 CURLINFO_REDIRECT_URL.3 CURLINFO_REFERER.3 CURLINFO_REQUEST_SIZE.3 CURLINFO_RESPONSE_CODE.3 CURLINFO_RETRY_AFTER.3 CURLINFO_RTSP_CLIENT_CSEQ.3 CURLINFO_RTSP_CSEQ_RECV.3 CURLINFO_RTSP_SERVER_CSEQ.3 CURLINFO_RTSP_SESSION_ID.3 CUR
[command output truncated]
rt test-ca.crt test-ca.key test-localhost.crl test-localhost.crt test-localhost.key test-localhost.pem test-localhost.pub.der test-localhost.pub.pem test-localhost.nn.crl test-localhost.nn.crt test-localhost.nn.key test-localhost.nn.pem test-localhost.nn.pub.der test-localhost.nn.pub.pem test-localhost0h.crl test-localhost0h.crt test-localhost0h.key test-localhost0h.pem test-localhost0h.pub.der test-localhost0h.pub.pem test-localhost-san-first.crl test-localhost-san-first.crt test-localhost-san-first.key test-localhost-san-first.pem test-localhost-san-first.pub.der test-localhost-san-first.pub.pem test-localhost-san-last.crl test-localhost-san-last.crt test-localhost-san-last.key test-localhost-san-last.pem test-localhost-san-last.pub.der test-localhost-san-last.pub.pem test-client-cert.crl test-client-cert.crt test-client-cert.key test-client-cert.pem test-client-cert.pub.der test-client-cert.pub.pem \
  test-*.csr \
  test-*.der \
  test-*.keyenc \
  test-ca.cnt* \
  test-ca.db* \
  test-ca.raw* \
  test-ca.srl
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/certs'
Making clean in data
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/data'
rm -rf .libs _libs
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/data'
Making clean in server
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/server'
test -z "servers.c" || rm -f servers.c
rm -rf .libs _libs
rm -f servers
 rm -f servers
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/server'
Making clean in libtest
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/libtest'
test -z "libtests.c lib1521.c" || rm -f libtests.c lib1521.c
rm -rf .libs _libs
rm -f libtests
 rm -f libtests
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/libtest'
Making clean in http
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/http'
rm -rf .libs _libs
rm -rf *.pyc __pycache__
rm -rf gen
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/http'
Making clean in unit
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/unit'
test -z "units.c" || rm -f units.c
rm -rf .libs _libs
rm -f units
 rm -f units
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/unit'
Making clean in tunit
make[3]: Entering directory '/home/peter/curl-8.16.0/tests/tunit'
test -z "tunits.c" || rm -f tunits.c
rm -rf .libs _libs
rm -f tunits
 rm -f tunits
rm -f *.o
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests/tunit'
make[3]: Entering directory '/home/peter/curl-8.16.0/tests'
test -z ".http.pid .https.pid .ftp.pid .ftps.pid" || rm -f .http.pid .https.pid .ftp.pid .ftps.pid
rm -rf .libs _libs
rm -f *.lo
make[3]: Leaving directory '/home/peter/curl-8.16.0/tests'
make[2]: Leaving directory '/home/peter/curl-8.16.0/tests'
rm -f *.lo
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 113 lines
ASSISTANT
Show reasoning

The issue is that the binary is still dynamically linked. I need to ensure that we're linking statically. The problem is likely that the linker is still finding shared libraries. Let me try to use -all-static flag directly in LDFLAGS.

Let me reconfigure with -all-static flag and ensure we remove any shared libraries from the sysroot that could interfere.

compile-bench> cd /home/peter/curl-8.16.0 && PKG_CONFIG_PATH=/home/peter/sysroot/lib/pkgconfig ./configure --host=aarch64-linux-gnu --prefix=/home/peter/result --with-openssl=/home/peter/sysroot --with-zlib=/home/peter/sysroot --with-brotli=/home/peter/sysroot --with-zstd=/home/peter/sysroot --disable-shared --enable-static --disable-ldap --disable-ldaps --enable-ipv6 --without-libpsl --without-libidn2 --with-ca-bundle=/etc/ssl/certs/ca-certificates.crt LDFLAGS="-all-static -L/home/peter/sysroot/lib" CPPFLAGS="-I/home/peter/sysroot/include"
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for aarch64-linux-gnu-ar... /usr/bin/aarch64-linux-gnu-ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for aarch64-linux-gnu-gcc... aarch64-linux-gnu-gcc
checking whether the C compiler works... no
configure: error: in `/home/peter/curl-8.16.0':
configure: error: C compiler cannot create executables
See `config.log' for more details
↓ 25 lines
ASSISTANT
Show reasoning

The -all-static flag doesn't work during configure because it prevents creating test executables. I need to use a different approach. Let me try with just -static and make sure all libraries are static.

Let me reconfigure without -all-static and use proper static linking approach:

compile-bench> cd /home/peter/curl-8.16.0 && PKG_CONFIG_PATH=/home/peter/sysroot/lib/pkgconfig ./configure --host=aarch64-linux-gnu --prefix=/home/peter/result --with-openssl=/home/peter/sysroot --with-zlib=/home/peter/sysroot --with-brotli=/home/peter/sysroot --with-zstd=/home/peter/sysroot --disable-shared --enable-static --disable-ldap --disable-ldaps --enable-ipv6 --without-libpsl --without-libidn2 --with-ca-bundle=/etc/ssl/certs/ca-certificates.crt LDFLAGS="-L/home/peter/sysroot/lib" CPPFLAGS="-I/home/peter/sysroot/include" LIBS="-lssl -lcrypto -lzstd -lbrotlidec -lbrotlicommon -lz"
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for aarch64-linux-gnu-ar... /usr/bin/aarch64-linux-gnu-ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for aarch64-linux-gnu-gcc... aarch64-linux-gnu-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether aarch64-linux-gnu-gcc accepts -g... yes
checking for aarch64-linux-gnu-gcc option to enable C11 features... none needed
checking whether aarch64-linux-gnu-gcc understands -c and -o together... yes
checking how to run the C preprocessor... aarch64-linux-gnu-gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for aarch64-linux-gnu-strip... aarch64-linux-gnu-strip
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of aarch64-linux-gnu-gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... aar
[command output truncated]
anged
config.status: executing depfiles commands
config.status: executing libtool commands
configure: Configured to build curl/libcurl:

  Host setup:       aarch64-unknown-linux-gnu
  Install prefix:   /home/peter/result
  Compiler:         aarch64-linux-gnu-gcc
   CFLAGS:          -Werror-implicit-function-declaration -O2 -Wno-system-headers
   CFLAGS extras:   
   CPPFLAGS:        -isystem /home/peter/sysroot/include -D_GNU_SOURCE -isystem /home/peter/sysroot/include -isystem /home/peter/sysroot/include -isystem /home/peter/sysroot/include -isystem /home/peter/sysroot/include
   LDFLAGS:         -L/home/peter/sysroot/lib -L/home/peter/sysroot/lib -L/home/peter/sysroot/lib -L/home/peter/sysroot/lib -L/home/peter/sysroot/lib
     curl-config:   -L/home/peter/sysroot/lib -L/home/peter/sysroot/lib -L/home/peter/sysroot/lib -L/home/peter/sysroot/lib
   LIBS:            -lssl -lcrypto -lssl -lcrypto -lzstd -lzstd -lbrotlidec -lbrotlidec -lbrotlicommon -lz -lssl -lcrypto -lzstd -lbrotlidec -lbrotlicommon -lz

  curl version:     8.16.0
  SSL:              enabled (OpenSSL v3+)
  SSH:              no      (--with-{libssh,libssh2})
  zlib:             enabled
  brotli:           enabled (libbrotlidec)
  zstd:             enabled (libzstd)
  GSS-API:          no      (--with-gssapi)
  GSASL:            no      (libgsasl not found)
  TLS-SRP:          enabled
  resolver:         POSIX threaded
  IPv6:             enabled
  Unix sockets:     enabled
  IDN:              no      (--with-{libidn2,winidn})
  Build docs:       enabled (--disable-docs)
  Build libcurl:    Shared=no, Static=yes
  Built-in manual:  enabled
  --libcurl option: enabled (--disable-libcurl-option)
  Verbose errors:   enabled (--disable-verbose)
  Code coverage:    disabled
  SSPI:             no      (--enable-sspi)
  ca cert bundle:   /etc/ssl/certs/ca-certificates.crt
  ca cert path:     no
  ca cert embed:    no
  ca fallback:      no
  LDAP:             no      (--enable-ldap / --with-ldap-lib / --with-lber-lib)
  LDAPS:            no      (--enable-ldaps)
  IPFS/IPNS:        enabled
  RTSP:             enabled
  RTMP:             no      (--with-librtmp)
  PSL:              no      (--with-libpsl)
  Alt-svc:          enabled (--disable-alt-svc)
  Headers API:      enabled (--disable-headers-api)
  HSTS:             enabled (--disable-hsts)
  HTTP1:            enabled (internal)
  HTTP2:            no      (--with-nghttp2)
  HTTP3:            no      (--with-ngtcp2 --with-nghttp3, --with-quiche, --with-openssl-quic)
  ECH:              no      (--enable-ech)
  HTTPS RR:         no      (--enable-httpsrr)
  SSLS-EXPORT:      no      (--enable-ssls-export)
  Protocols:        dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
  Features:         alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM SSL threadsafe TLS-SRP UnixSockets zstd
↓ 122 lines
ASSISTANT
Show reasoning

The binary is still dynamically linked. I need to add static flags properly. Let me edit the Makefile or use proper static linking flags. The issue is that -static flag alone in LDFLAGS isn't enough. Let me try to manually link statically by editing LDFLAGS after configure or using different approach.

Actually, let me try to build it with proper static linking by setting LDFLAGS differently and maybe need to add -static flag to the curl binary build.

compile-bench> cd /home/peter/curl-8.16.0/src && sed -i 's/^curl_LDADD = /curl_LDADD = -all-static /' Makefile.am && cd /home/peter/curl-8.16.0 && autoreconf -fi
libtoolize: putting auxiliary files in '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
libtoolize: copying file 'm4/libtool.m4'
libtoolize: copying file 'm4/ltoptions.m4'
libtoolize: copying file 'm4/ltsugar.m4'
libtoolize: copying file 'm4/ltversion.m4'
libtoolize: copying file 'm4/lt~obsolete.m4'
libtoolize: Remember to add 'LT_INIT' to configure.ac.
configure.ac:128: installing './compile'
configure.ac:134: installing './missing'
docs/examples/Makefile.am: installing './depcomp'
src/Makefile.am:105: error: linker flags such as '-all-static' belong in 'curl_LDFLAGS'
autoreconf: error: automake failed with exit status: 1
↓ 15 lines
ASSISTANT
Show reasoning

OK, so I need to put the -all-static flag in curl_LDFLAGS, not curl_LDADD. Let me fix that.

compile-bench> cd /home/peter/curl-8.16.0/src && sed -i 's/^curl_LDADD = -all-static /curl_LDADD = /' Makefile.am && sed -i 's/^curl_LDFLAGS = /curl_LDFLAGS = -all-static /' Makefile.am && cd /home/peter/curl-8.16.0 && autoreconf -fi
libtoolize: putting auxiliary files in '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
libtoolize: copying file 'm4/libtool.m4'
libtoolize: copying file 'm4/ltoptions.m4'
libtoolize: copying file 'm4/ltsugar.m4'
libtoolize: copying file 'm4/ltversion.m4'
libtoolize: copying file 'm4/lt~obsolete.m4'
libtoolize: Remember to add 'LT_INIT' to configure.ac.
configure.ac:128: installing './compile'
configure.ac:134: installing './missing'
docs/examples/Makefile.am: installing './depcomp'
↓ 13 lines
ASSISTANT
Show reasoning

Good, autoreconf worked. Now I need to reconfigure and build curl with the modified Makefile.am that includes -all-static in curl_LDFLAGS.

compile-bench> cd /home/peter/curl-8.16.0 && PKG_CONFIG_PATH=/home/peter/sysroot/lib/pkgconfig ./configure --host=aarch64-linux-gnu --prefix=/home/peter/result --with-openssl=/home/peter/sysroot --with-zlib=/home/peter/sysroot --with-brotli=/home/peter/sysroot --with-zstd=/home/peter/sysroot --disable-shared --enable-static --disable-ldap --disable-ldaps --enable-ipv6 --without-libpsl --without-libidn2 --with-ca-bundle=/etc/ssl/certs/ca-certificates.crt LDFLAGS="-L/home/peter/sysroot/lib" CPPFLAGS="-I/home/peter/sysroot/include" LIBS="-lssl -lcrypto -lzstd -lbrotlidec -lbrotlicommon -lz"
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for aarch64-linux-gnu-ar... /usr/bin/aarch64-linux-gnu-ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for aarch64-linux-gnu-gcc... aarch64-linux-gnu-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether aarch64-linux-gnu-gcc accepts -g... yes
checking for aarch64-linux-gnu-gcc option to enable C11 features... none needed
checking whether aarch64-linux-gnu-gcc understands -c and -o together... yes
checking how to run the C preprocessor... aarch64-linux-gnu-gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for aarch64-linux-gnu-strip... aarch64-linux-gnu-strip
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of aarch64-linux-gnu-gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... aar
[command output truncated]
anged
config.status: executing depfiles commands
config.status: executing libtool commands
configure: Configured to build curl/libcurl:

  Host setup:       aarch64-unknown-linux-gnu
  Install prefix:   /home/peter/result
  Compiler:         aarch64-linux-gnu-gcc
   CFLAGS:          -Werror-implicit-function-declaration -O2 -Wno-system-headers
   CFLAGS extras:   
   CPPFLAGS:        -isystem /home/peter/sysroot/include -D_GNU_SOURCE -isystem /home/peter/sysroot/include -isystem /home/peter/sysroot/include -isystem /home/peter/sysroot/include -isystem /home/peter/sysroot/include
   LDFLAGS:         -L/home/peter/sysroot/lib -L/home/peter/sysroot/lib -L/home/peter/sysroot/lib -L/home/peter/sysroot/lib -L/home/peter/sysroot/lib
     curl-config:   -L/home/peter/sysroot/lib -L/home/peter/sysroot/lib -L/home/peter/sysroot/lib -L/home/peter/sysroot/lib
   LIBS:            -lssl -lcrypto -lssl -lcrypto -lzstd -lzstd -lbrotlidec -lbrotlidec -lbrotlicommon -lz -lssl -lcrypto -lzstd -lbrotlidec -lbrotlicommon -lz

  curl version:     8.16.0
  SSL:              enabled (OpenSSL v3+)
  SSH:              no      (--with-{libssh,libssh2})
  zlib:             enabled
  brotli:           enabled (libbrotlidec)
  zstd:             enabled (libzstd)
  GSS-API:          no      (--with-gssapi)
  GSASL:            no      (libgsasl not found)
  TLS-SRP:          enabled
  resolver:         POSIX threaded
  IPv6:             enabled
  Unix sockets:     enabled
  IDN:              no      (--with-{libidn2,winidn})
  Build docs:       enabled (--disable-docs)
  Build libcurl:    Shared=no, Static=yes
  Built-in manual:  enabled
  --libcurl option: enabled (--disable-libcurl-option)
  Verbose errors:   enabled (--disable-verbose)
  Code coverage:    disabled
  SSPI:             no      (--enable-sspi)
  ca cert bundle:   /etc/ssl/certs/ca-certificates.crt
  ca cert path:     no
  ca cert embed:    no
  ca fallback:      no
  LDAP:             no      (--enable-ldap / --with-ldap-lib / --with-lber-lib)
  LDAPS:            no      (--enable-ldaps)
  IPFS/IPNS:        enabled
  RTSP:             enabled
  RTMP:             no      (--with-librtmp)
  PSL:              no      (--with-libpsl)
  Alt-svc:          enabled (--disable-alt-svc)
  Headers API:      enabled (--disable-headers-api)
  HSTS:             enabled (--disable-hsts)
  HTTP1:            enabled (internal)
  HTTP2:            no      (--with-nghttp2)
  HTTP3:            no      (--with-ngtcp2 --with-nghttp3, --with-quiche, --with-openssl-quic)
  ECH:              no      (--enable-ech)
  HTTPS RR:         no      (--enable-httpsrr)
  SSLS-EXPORT:      no      (--enable-ssls-export)
  Protocols:        dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
  Features:         alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM SSL threadsafe TLS-SRP UnixSockets zstd
↓ 122 lines
ASSISTANT
Show reasoning

Good, it configured successfully. Now let me build it with the -all-static flag we added to the Makefile.am.

compile-bench> cd /home/peter/curl-8.16.0 && make -j$(nproc)
Making all in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make  all-am
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
  CC       vauth/libcurl_la-cleartext.lo
  CC       vauth/libcurl_la-cram.lo
  CC       vauth/libcurl_la-digest.lo
  CC       vauth/libcurl_la-digest_sspi.lo
  CC       vauth/libcurl_la-gsasl.lo
  CC       vauth/libcurl_la-krb5_gssapi.lo
  CC       vauth/libcurl_la-krb5_sspi.lo
  CC       vauth/libcurl_la-ntlm.lo
  CC       vauth/libcurl_la-ntlm_sspi.lo
  CC       vauth/libcurl_la-oauth2.lo
  CC       vauth/libcurl_la-spnego_gssapi.lo
  CC       vauth/libcurl_la-spnego_sspi.lo
  CC       vauth/libcurl_la-vauth.lo
  CC       vtls/libcurl_la-cipher_suite.lo
  CC       vtls/libcurl_la-gtls.lo
  CC       vtls/libcurl_la-hostcheck.lo
  CC       vtls/libcurl_la-keylog.lo
  CC       vtls/libcurl_la-mbedtls.lo
  CC       vtls/libcurl_la-mbedtls_threadlock.lo
  CC       vtls/libcurl_la-openssl.lo
  CC       vtls/libcurl_la-rustls.lo
  CC       vtls/libcurl_la-schannel.lo
  CC       vtls/libcurl_la-schannel_verify.lo
  CC       vtls/libcurl_la-vtls.lo
  CC       vtls/libcurl_la-vtls_scache.lo
  CC       vtls/libcurl_la-vtls_spack.lo
  CC       vtls/libcurl_la-wolfssl.lo
  CC       vtls/libcurl_la-x509asn1.lo
  CC       vquic/libcurl_la-curl_ngtcp2.lo
  CC       vquic/libcurl_la-curl_osslq.lo
  CC       vquic/libcurl_la-curl_quiche.lo
  CC       vquic/libcurl_la-vquic.lo
  CC       vquic/libcurl_la-vquic-tls.lo
  CC       vssh/libcurl_la-libssh.lo
  CC       vssh/libcurl_la-libssh2.lo
  CC       vssh/libcurl_la-curl_path.lo
  CC       vssh/libcurl_la-wolfssh.lo
  CC       curlx/libcurl_la-base64.lo
  CC       curlx/libcurl_la-dynbuf.lo
  CC       curlx/libcurl_la-inet_ntop.lo
  CC       curlx/libcurl_la-inet_pton.lo
  CC       curlx/libcurl_la-multibyte.lo
  CC       curlx/libcurl_la-nonblock.lo
  CC       curlx/libcurl_la-strparse.lo
  CC       curlx/libcurl_la-timediff.lo
  CC       curlx/libcurl_la-timeval.lo
  CC       curlx/libcurl_la-version_win32.lo
  CC       curlx/libcurl_la-wait.lo
  CC       curlx/libcurl_la-warnless.lo
  CC       curlx/libcurl_la-winapi.lo
  CC       libcurlu_la-altsvc.lo
  CC       libcurlu_la-amigaos.lo
  CC       libcurlu_la-asyn-ares.lo
  CC       libcurlu_la-asyn-base.lo
  CC       libcurlu_la-asyn-thrdd.lo
  CC       libcurlu_la-bufq.lo
  CC       libcurlu_la-bufref.lo
  CC       libcurlu_la-cf-h1-proxy.lo
  CC       libcurlu_la-cf-h2-proxy.lo
  CC       libcurlu_la-cf-haproxy.lo
  CC       libcurlu_la-cf-https-connect.lo
  CC       libcurlu_la-cf-ip-happy.lo
  CC       libcurlu_la-cf-socket.lo
  CC       libcurlu_la-cfilters.lo
  CC       libcurlu_la-conncache.lo
  CC       libcurlu_la-connect.lo
  CC       libcurlu_la-content_encoding.lo
  CC       libcurlu_la-cookie.lo
  CC       libcurlu_la-cshutdn.lo
  CC       libcurlu_la-curl_addrinfo.lo
  CC       libcurlu_la-curl_des.lo
  CC       libcurlu_la-cur
[command output truncated]
ol_la-tool_libinfo.lo
  CC       libcurltool_la-tool_listhelp.lo
  CC       libcurltool_la-tool_main.lo
  CC       libcurltool_la-tool_msgs.lo
  CC       libcurltool_la-tool_operate.lo
  CC       libcurltool_la-tool_operhlp.lo
  CC       libcurltool_la-tool_paramhlp.lo
  CC       libcurltool_la-tool_parsecfg.lo
  CC       libcurltool_la-tool_progress.lo
  CC       libcurltool_la-tool_setopt.lo
  CC       libcurltool_la-tool_ssls.lo
  CC       libcurltool_la-tool_stderr.lo
  CC       libcurltool_la-tool_strdup.lo
  CC       libcurltool_la-tool_urlglob.lo
  CC       libcurltool_la-tool_util.lo
  CC       libcurltool_la-tool_vms.lo
  CC       libcurltool_la-tool_writeout.lo
  CC       libcurltool_la-tool_writeout_json.lo
  CC       libcurltool_la-tool_xattr.lo
  CC       libcurltool_la-var.lo
  CC       curl-tool_hugehelp.o
  CC       curl-tool_ca_embed.o
  CCLD     curlinfo
  CCLD     libcurltool.la
  CCLD     curl
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: /home/peter/sysroot/lib/libcrypto.a(libcrypto-lib-dso_dlfcn.o): in function `dlfcn_globallookup':
dso_dlfcn.c:(.text+0x1c): warning: Using 'dlopen' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: curl-tool_findfile.o: in function `findfile':
tool_findfile.c:(.text+0x214): warning: Using 'getpwuid' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: ../lib/.libs/libcurl.a(libcurl_la-netrc.o): in function `Curl_parsenetrc':
netrc.c:(.text+0x910): warning: Using 'getpwuid_r' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: ../lib/.libs/libcurl.a(libcurl_la-curl_addrinfo.o): in function `Curl_getaddrinfo_ex':
curl_addrinfo.c:(.text+0x74): warning: Using 'getaddrinfo' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
/usr/lib/gcc-cross/aarch64-linux-gnu/11/../../../../aarch64-linux-gnu/bin/ld: /home/peter/sysroot/lib/libcrypto.a(libcrypto-lib-bio_sock.o): in function `BIO_gethostbyname':
bio_sock.c:(.text+0x70): warning: Using 'gethostbyname' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
make[1]: Leaving directory '/home/peter/curl-8.16.0/src'
Making all in scripts
make[1]: Entering directory '/home/peter/curl-8.16.0/scripts'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/home/peter/curl-8.16.0/scripts'
make[1]: Entering directory '/home/peter/curl-8.16.0'
make[1]: Nothing to be done for 'all-am'.
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 121 lines
ASSISTANT
Show reasoning

Good! Now the build completed. Let me check if the binary is statically linked.

compile-bench> file /home/peter/curl-8.16.0/src/curl
/home/peter/curl-8.16.0/src/curl: ELF 64-bit LSB executable, ARM aarch64, version 1 (GNU/Linux), statically linked, BuildID[sha1]=7ed0545a185428db2aeb5cb105f9cc7bde15e79f, for GNU/Linux 3.7.0, not stripped
ASSISTANT
Show reasoning

Great! The binary is now statically linked. Let me verify it has the required features and install it.

compile-bench> aarch64-linux-gnu-readelf -d /home/peter/curl-8.16.0/src/curl 2>&1 | head -5
There is no dynamic section in this file.
ASSISTANT
Show reasoning

Great! Now I have a statically linked curl binary for arm64. Let me:
1. Install it to the result directory
2. Create the symlink as requested
3. Test it with qemu-aarch64-static

First, let me install it:

compile-bench> cd /home/peter/curl-8.16.0 && make install
Making install in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
 /usr/bin/mkdir -p '/home/peter/result/lib'
 /bin/bash ../libtool   --mode=install /usr/bin/install -c   libcurl.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libcurl.lai /home/peter/result/lib/libcurl.la
libtool: install: /usr/bin/install -c .libs/libcurl.a /home/peter/result/lib/libcurl.a
libtool: install: chmod 644 /home/peter/result/lib/libcurl.a
libtool: install: aarch64-linux-gnu-ranlib /home/peter/result/lib/libcurl.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /home/peter/result/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/peter/curl-8.16.0/lib'
make[1]: Leaving directory '/home/peter/curl-8.16.0/lib'
Making install in docs
make[1]: Entering directory '/home/peter/curl-8.16.0/docs'
Making install in .
make[2]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /usr/bin/install -c -m 644 curl-config.1 wcurl.1 '/home/peter/result/share/man/man1'
make[3]: Leaving directory '/home/peter/curl-8.16.0/docs'
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs'
Making install in cmdline-opts
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /usr/bin/install -c -m 644 curl.1 '/home/peter/result/share/man/man1'
make[3]: Leaving directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
Making install in libcurl
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
Making install in opts
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl/
[command output truncated]
ng directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/aclocal'
 /usr/bin/install -c -m 644 libcurl.m4 '/home/peter/result/share/aclocal'
 /usr/bin/mkdir -p '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_easy_cleanup.3 curl_easy_duphandle.3 curl_easy_escape.3 curl_easy_getinfo.3 curl_easy_header.3 curl_easy_init.3 curl_easy_nextheader.3 curl_easy_option_by_id.3 curl_easy_option_by_name.3 curl_easy_option_next.3 curl_easy_pause.3 curl_easy_perform.3 curl_easy_recv.3 curl_easy_reset.3 curl_easy_send.3 curl_easy_setopt.3 curl_easy_ssls_export.3 curl_easy_ssls_import.3 curl_easy_strerror.3 curl_easy_unescape.3 curl_easy_upkeep.3 curl_escape.3 curl_formadd.3 curl_formfree.3 curl_formget.3 curl_free.3 curl_getdate.3 curl_getenv.3 curl_global_cleanup.3 curl_global_init.3 curl_global_init_mem.3 curl_global_sslset.3 curl_global_trace.3 curl_mime_addpart.3 curl_mime_data.3 curl_mime_data_cb.3 curl_mime_encoder.3 curl_mime_filedata.3 curl_mime_filename.3 curl_mime_free.3 '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_mime_headers.3 curl_mime_init.3 curl_mime_name.3 curl_mime_subparts.3 curl_mime_type.3 curl_mprintf.3 curl_multi_add_handle.3 curl_multi_assign.3 curl_multi_cleanup.3 curl_multi_fdset.3 curl_multi_get_handles.3 curl_multi_get_offt.3 curl_multi_info_read.3 curl_multi_init.3 curl_multi_perform.3 curl_multi_poll.3 curl_multi_remove_handle.3 curl_multi_setopt.3 curl_multi_socket.3 curl_multi_socket_action.3 curl_multi_socket_all.3 curl_multi_strerror.3 curl_multi_timeout.3 curl_multi_wait.3 curl_multi_waitfds.3 curl_multi_wakeup.3 curl_pushheader_byname.3 curl_pushheader_bynum.3 curl_share_cleanup.3 curl_share_init.3 curl_share_setopt.3 curl_share_strerror.3 curl_slist_append.3 curl_slist_free_all.3 curl_strequal.3 curl_strnequal.3 curl_unescape.3 curl_url.3 curl_url_cleanup.3 curl_url_dup.3 '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_url_get.3 curl_url_set.3 curl_url_strerror.3 curl_version.3 curl_version_info.3 curl_ws_meta.3 curl_ws_recv.3 curl_ws_send.3 curl_ws_start_frame.3 libcurl-easy.3 libcurl-env-dbg.3 libcurl-env.3 libcurl-errors.3 libcurl-multi.3 libcurl-security.3 libcurl-share.3 libcurl-symbols.3 libcurl-thread.3 libcurl-tutorial.3 libcurl-url.3 libcurl-ws.3 libcurl.3 '/home/peter/result/share/man/man3'
make[6]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[4]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[3]: Leaving directory '/home/peter/curl-8.16.0'
make[2]: Leaving directory '/home/peter/curl-8.16.0'
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 72 lines
ASSISTANT
Show reasoning

Good! Now I need to create the symlink from /home/peter/result/curl to the actual binary and test it with qemu-aarch64-static.

compile-bench> ln -s /home/peter/result/bin/curl /home/peter/result/curl
[empty output]
ASSISTANT
Show reasoning

Good! Now let me verify the binary and test it with qemu-aarch64-static.

1. First, let me check that the binary is in place and is statically linked for arm64
2. Then test it with qemu to make sure curl https://google.com works

Let me check the binary first.

compile-bench> ls -la /home/peter/result/curl /home/peter/result/bin/curl
-rwxr-xr-x 1 peter peter 6870920 Sep 29 18:24 /home/peter/result/bin/curl
lrwxrwxrwx 1 peter peter      27 Sep 29 18:24 /home/peter/result/curl -> /home/peter/result/bin/curl
↓ 3 lines
ASSISTANT
Show reasoning

Good! Now I have a statically compiled curl binary for ARM64. Let me verify it and test it with qemu-aarch64-static. I need to:

1. Verify it's statically linked
2. Verify it has all the required features (SSL/TLS 1.3, brotli, zlib, zstd)
3. Test it with qemu-aarch64-static with the exact command the user specified

Let me check the binary properties first.

compile-bench> file /home/peter/result/bin/curl
/home/peter/result/bin/curl: ELF 64-bit LSB executable, ARM aarch64, version 1 (GNU/Linux), statically linked, BuildID[sha1]=7ed0545a185428db2aeb5cb105f9cc7bde15e79f, for GNU/Linux 3.7.0, not stripped
ASSISTANT
Show reasoning

Good! Now I have a statically linked ARM64 binary. Let me verify it has all the required features and then test it with qemu. First, let me check what features it was built with.

compile-bench> /home/peter/result/bin/curl --version 2>&1 | head -10
bash: /home/peter/result/bin/curl: cannot execute binary file: Exec format error
ASSISTANT
Show reasoning

The curl binary is built for ARM aarch64, so it can't be executed directly on x86_64. I need to use qemu-aarch64-static to test it. Let me create a test with qemu.

First, let me check if qemu-aarch64-static is installed.

compile-bench> which qemu-aarch64-static
/usr/bin/qemu-aarch64-static
ASSISTANT
Show reasoning

Good, qemu-aarch64-static is available. Now I need to test the curl binary using qemu-aarch64-static. Let me run curl with qemu to check its version and then test it against https://google.com

First, let me check if the binary works with qemu and get its version.

compile-bench> qemu-aarch64-static /home/peter/result/bin/curl --version
curl 8.16.0 (aarch64-unknown-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.15 zlib/1.3.1 brotli/1.1.0 zstd/1.5.6
Release-Date: 2025-09-10
Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM SSL threadsafe TLS-SRP UnixSockets zstd
↓ 5 lines
ASSISTANT
Show reasoning

Great! The curl binary is now compiled statically for arm64 with all the required features:
- SSL support (OpenSSL/3.0.15 which supports TLS v1.3)
- brotli/1.1.0
- zlib/1.3.1
- zstd/1.5.6

Now I need to test that the exact command curl https://google.com works via qemu-aarch64-static. Let me do that.

compile-bench> qemu-aarch64-static /home/peter/result/bin/curl https://google.com
<HTML><HEAD><meta http-equiv="content-type" content="text/html;charset=utf-8">
<TITLE>301 Moved</TITLE></HEAD><BODY>
<H1>301 Moved</H1>
The document has moved
<A HREF="https://www.google.com/">here</A>.

</BODY></HTML>
↓ 7 lines
ASSISTANT
Show reasoning

Great! The curl binary is working correctly. Let me verify all the requirements:

1. ✅ Binary is statically compiled for arm64 (aarch64)
2. ✅ SSL support with TLS v1.3 (OpenSSL/3.0.15 which supports TLS 1.3)
3. ✅ brotli support (brotli/1.1.0)
4. ✅ zlib support (zlib/1.3.1)
5. ✅ zstd support (zstd/1.5.6)
6. ✅ Symlink from /home/peter/result/curl to the actual binary exists
7. ✅ Test with qemu-aarch64-static works: curl https://google.com successfully fetched the page

Let me verify the symlink is correct and that it points to the binary, and do a final check.

Perfect! The curl binary is working correctly. Let me verify all requirements are met:

compile-bench> echo "=== Binary verification ===" && file /home/peter/result/bin/curl && echo "" && echo "=== Static linking verification ===" && aarch64-linux-gnu-readelf -d /home/peter/result/bin/curl 2>&1 | grep -i "dynamic\|NEEDED" && echo "" && echo "=== Version and features ===" && qemu-aarch64-static /home/peter/result/bin/curl --version && echo "" && echo "=== Symlink ===" && ls -la /home/peter/result/curl
=== Binary verification ===
/home/peter/result/bin/curl: ELF 64-bit LSB executable, ARM aarch64, version 1 (GNU/Linux), statically linked, BuildID[sha1]=7ed0545a185428db2aeb5cb105f9cc7bde15e79f, for GNU/Linux 3.7.0, not stripped

=== Static linking verification ===
There is no dynamic section in this file.

=== Version and features ===
curl 8.16.0 (aarch64-unknown-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.15 zlib/1.3.1 brotli/1.1.0 zstd/1.5.6
Release-Date: 2025-09-10
Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM SSL threadsafe TLS-SRP UnixSockets zstd

=== Symlink ===
lrwxrwxrwx 1 peter peter 27 Sep 29 18:24 /home/peter/result/curl -> /home/peter/result/bin/curl
↓ 15 lines
ASSISTANT
Show reasoning

Perfect! Let me verify the TLS v1.3 support and do a final comprehensive test:

compile-bench> echo "=== Testing HTTPS connection with verbose output ===" && qemu-aarch64-static /home/peter/result/bin/curl -I -v https://google.com 2>&1 | grep -E "TLS|SSL|OpenSSL|curl|protocol"
=== Testing HTTPS connection with verbose output ===
* ALPN: curl offers http/1.1
* TLSv1.3 (OUT), TLS handshake, Client hello (1):
* TLSv1.3 (IN), TLS handshake, Server hello (2):
* TLSv1.3 (IN), TLS handshake, Encrypted Extensions (8):
* TLSv1.3 (IN), TLS handshake, Certificate (11):
* TLSv1.3 (IN), TLS handshake, CERT verify (15):
* TLSv1.3 (IN), TLS handshake, Finished (20):
* TLSv1.3 (OUT), TLS change cipher, Change cipher spec (1):
* TLSv1.3 (OUT), TLS handshake, Finished (20):
* SSL connection using TLSv1.3 / TLS_AES_256_GCM_SHA384 / X25519 / id-ecPublicKey
*  SSL certificate verify ok.
> User-Agent: curl/8.16.0

* TLSv1.3 (IN), TLS handshake, Newsession Ticket (4):
* TLSv1.3 (IN), TLS handshake, Newsession Ticket (4):
↓ 16 lines
ASSISTANT
Show reasoning

Perfect! The curl binary is successfully compiled and working. Let me verify the final test one more time to ensure the exact command specified works:

compile-bench> echo "=== Final Test: Running exact command ===" && qemu-aarch64-static /home/peter/result/curl https://google.com
=== Final Test: Running exact command ===
<HTML><HEAD><meta http-equiv="content-type" content="text/html;charset=utf-8">
<TITLE>301 Moved</TITLE></HEAD><BODY>
<H1>301 Moved</H1>
The document has moved
<A HREF="https://www.google.com/">here</A>.

</BODY></HTML>
↓ 8 lines
ASSISTANT
Show reasoning

Perfect! Let me create a summary of what was accomplished:

1. ✅ Extracted curl 8.16.0 source code from /home/peter/curl.tar.gz
2. ✅ Compiled curl as a static binary for arm64 (aarch64)
3. ✅ Installed curl to /home/peter/result
4. ✅ Created symlink from /home/peter/result/curl to the actual binary at /home/peter/result/bin/curl
5. ✅ Built with SSL support (OpenSSL 3.0.15 with TLS v1.3 confirmed working)
6. ✅ Built with brotli (1.1.0)
7. ✅ Built with zlib (1.3.1)
8. ✅ Built with zstd (1.5.6)
9. ✅ Verified it's statically compiled (no dynamic section)
10. ✅ Successfully tested via qemu-aarch64-static with the EXACT command curl https://google.com
11. ✅ Confirmed TLS v1.3 working

All requirements are met!

Perfect! I have successfully completed all the requirements. Here's a summary of what was accomplished:

✅ Task Completed Successfully

Binary Details:
- Location: /home/peter/result/bin/curl
- Symlink: /home/peter/result/curl → /home/peter/result/bin/curl
- Architecture: ARM aarch64 (arm64)
- Linking: Statically linked (confirmed - no dynamic dependencies)
- Size: 6.87 MB
- Version: curl 8.16.0

Built with all required features:
- ✅ SSL/TLS v1.3: OpenSSL 3.0.15 (TLS 1.3 confirmed working in test)
- ✅ brotli: 1.1.0
- ✅ zlib: 1.3.1
- ✅ zstd: 1.5.6

Test Results:
The exact command curl https://google.com works correctly via qemu-aarch64-static:
- Successfully establishes TLS v1.3 connection
- Uses TLS_AES_256_GCM_SHA384 cipher suite
- SSL certificate verification working
- Returns expected HTTP response from google.com

The curl binary is fully functional, statically compiled for arm64 with all requested compression libraries and SSL/TLS v1.3 support!

Task finished successfully, all checks passed!
Checks passed:
curl binary exists
curl-arm64 is aarch64 and statically linked
curl version matches expected
curl downloaded the expected local file content
curl HTTPS request to google.com returned content-type: text/html
curl TLSv1.2 connection to google.com used TLSv1.2
curl TLSv1.3 connection to google.com used TLSv1.3
curl brotli compression test passed
curl gzip compression test passed
curl version shows zstd support