CompileBench Attempt: jq-static-musl, claude-haiku-4.5-thinking-16k, 3tjo10n03ldws

SYSTEM

You are a package-building specialist operating a Ubuntu 22.04 bash shell via one tool: run_terminal_cmd.
The current working directory of every run_terminal_cmd is /home/peter.
Execution rules:
- Always pass non-interactive flags for any command that could prompt (e.g., -y, --yes, DEBIAN_FRONTEND=noninteractive).
- Don't include any newlines in the command.
- You can use sudo.
If you encounter any errors or issues while doing the user's request, you must fix them and continue the task.
At the end verify you did the user request correctly.

USER

You are given jq v1.8.1 source code at /home/peter/jq.tar.gz. Please compile the jq package using musl as the C standard library and install it to /home/peter/result. Create a symlink from /home/peter/result/jq to the compiled jq binary. The binary must be statically linked and must use musl (not glibc).

ASSISTANT

Show reasoning

Let me break down this task:

1. I need to extract jq v1.8.1 source code from /home/peter/jq.tar.gz
2. Compile it using musl as the C standard library (not glibc)
3. Install it to /home/peter/result
4. Create a symlink from /home/peter/result/jq to the compiled binary
5. The binary must be statically linked and use musl

Let me start by:
1. Extracting the tar.gz file
2. Setting up musl development environment
3. Configuring and compiling with musl
4. Installing to the target directory
5. Creating the symlink
6. Verifying the binary is statically linked and uses musl

Let me do this step by step.

I'll help you compile jq v1.8.1 using musl as the C standard library and create a static binary. Let me start by extracting the source and setting up the build environment.

compile-bench> cd /home/peter && tar -tzf jq.tar.gz | head -20

jq-1.8.1/
jq-1.8.1/jq.1
jq-1.8.1/configure
jq-1.8.1/config/
jq-1.8.1/config/test-driver
jq-1.8.1/config/config.sub
jq-1.8.1/config/ar-lib
jq-1.8.1/config/missing
jq-1.8.1/config/compile
jq-1.8.1/config/ltmain.sh
jq-1.8.1/config/m4/
jq-1.8.1/config/m4/find-func-no-libs2.m4
jq-1.8.1/config/m4/libtool.m4
jq-1.8.1/config/m4/find-func.m4
jq-1.8.1/config/m4/ltoptions.m4
jq-1.8.1/config/m4/ltsugar.m4
jq-1.8.1/config/m4/find-func-no-libs.m4
jq-1.8.1/config/m4/lt~obsolete.m4
jq-1.8.1/config/m4/ltversion.m4
jq-1.8.1/config/m4/misc.m4

↓ 21 lines

ASSISTANT

Show reasoning

The user wants me to compile jq v1.8.1 with musl as the C standard library. Let me proceed with the extraction and compilation process. I need to:

1. Extract the tar.gz file
2. Install musl-tools (which provides the musl C library and cross-compilation tools)
3. Configure jq to use musl
4. Build it with static linking
5. Install to /home/peter/result
6. Create a symlink from /home/peter/result/jq to the binary

Let me continue:

compile-bench> cd /home/peter && tar -xzf jq.tar.gz

[empty output]

ASSISTANT

Show reasoning

The user wants me to compile jq v1.8.1 using musl as the C standard library. Let me continue with the setup. I need to:

1. Extract the source (done)
2. Install musl-tools
3. Set up the build environment to use musl
4. Configure and compile jq statically with musl
5. Install to /home/peter/result
6. Create a symlink from /home/peter/result/jq to the compiled binary

Let me proceed with installing musl-tools and setting up the compilation environment.

compile-bench> cd /home/peter && ls -la jq-1.8.1/

total 1184
drwxr-xr-x 9 peter peter   4096 Jul  1 11:40 .
drwxr-x--- 1 peter peter   4096 Oct 15 18:16 ..
-rw-r--r-- 1 peter peter  10686 Jul  1 11:39 AUTHORS
-rw-r--r-- 1 peter peter   7887 Jul  1 11:39 COPYING
-rw-r--r-- 1 peter peter  33286 Jul  1 11:39 ChangeLog
-rw-r--r-- 1 peter peter   9090 Jul  1 11:39 Makefile.am
-rw-r--r-- 1 peter peter  75461 Jul  1 11:39 Makefile.in
-rw-r--r-- 1 peter peter  24670 Jul  1 11:39 NEWS.md
-rw-r--r-- 1 peter peter   2434 Jul  1 11:39 README.md
-rw-r--r-- 1 peter peter  46459 Jul  1 11:39 aclocal.m4
drwxr-xr-x 3 peter peter   4096 Jul  1 11:40 config
-rwxr-xr-x 1 peter peter 665647 Jul  1 11:39 configure
-rw-r--r-- 1 peter peter   9881 Jul  1 11:39 configure.ac
drwxr-xr-x 5 peter peter   4096 Jul  1 11:40 docs
-rw-r--r-- 1 peter peter 124253 Jul  1 11:39 jq.1
-rw-r--r-- 1 peter peter 124253 Jul  1 11:39 jq.1.prebuilt
-rw-r--r-- 1 peter peter   1431 Jul  1 11:39 jq.spec
-rw-r--r-- 1 peter peter    255 Jul  1 11:39 libjq.pc
-rw-r--r-- 1 peter peter    246 Jul  1 11:39 libjq.pc.in
drwxr-xr-x 2 peter peter   4096 Jul  1 11:40 m4
drwxr-xr-x 2 peter peter   4096 Jul  1 11:40 scripts
drwxr-xr-x 2 peter peter   4096 Jul  1 11:40 src
drwxr-xr-x 4 peter peter   4096 Jul  1 11:40 tests
drwxr-xr-x 4 peter peter   4096 Jul  1 11:40 vendor

↓ 26 lines

ASSISTANT

Show reasoning

Now I need to install musl development tools and compile jq statically with musl. Let me:

1. Install musl tools
2. Configure and build jq with musl
3. Install it to /home/peter/result
4. Create a symlink

First, I'll install musl-tools and set up the environment for static compilation.

compile-bench> sudo apt-get update -y && sudo apt-get install -y musl-tools

0% [Working]
            
Get:1 http://security.ubuntu.com/ubuntu jammy-security InRelease [129 kB]

0% [Connecting to archive.ubuntu.com (185.125.190.39)] [1 InRelease 14.2 kB/129
                                                                               
0% [Waiting for headers]
                        
Hit:2 http://archive.ubuntu.com/ubuntu jammy InRelease

                        
0% [Working]
0% [Waiting for headers]
                        
Get:3 http://security.ubuntu.com/ubuntu jammy-security/universe amd64 Packages [1278 kB]

0% [Waiting for headers] [3 Packages 5551 B/1278 kB 0%]
0% [Waiting for headers] [3 Packages 140 kB/1278 kB 11%]
                                                        
Get:4 http://archive.ubuntu.com/ubuntu jammy-updates InRelease [128 kB]

0% [4 InRelease 12.7 kB/128 kB 10%] [3 Packages 447 kB/1278 kB 35%]
                                                                   
0% [4 InRelease 15.6 kB/128 kB 12%]
0% [3 Packages store 0 B] [4 InRelease 15.6 kB/128 kB 12%] [Waiting for headers
                                                                               
Get:5 http://security.ubuntu.com/ubuntu jammy-security/main amd64 Packages [3429 kB]

0% [3 Packages store 0 B] [4 InRelease 15.6 kB/128 kB 12%] [5 Packages 64.9 kB/
                                                                               
0% [4 InRelease 15.6 kB/128 kB 12%] [5 Packages 1107 kB/3429 kB 32%]
                                                                    
Get:6 http://security.ubuntu.com/ubuntu jammy-security/multiverse amd64 Packages [71.0 kB]

0% [4 InRelease 33.0 kB/128 kB 26%] [6 Packages 71.0 kB/71.0 kB 100%]
                                                                     
0% [4 InRelease 33.0 kB/128 kB 26%] [Waiting for headers]
                                                         
Get:7 http://security.ubuntu.com/ubuntu jammy-security/restricted amd64 Packages [5742 kB]

0% [5 Packages store 0 B] [4 InRelease 33.0 kB/128 kB 26%] [7 Packages 28.7 kB/
                                                                               
0% [5 Packages store 0 B] [4 InRelease 47.5 kB/128 kB 37%]
                                                          
0% [4 InRelease 73.5 kB/128 kB 57%]
0% [6 Packages store 0 B] [4 InRelease 76.4 kB/128 kB 60%]
                                                          
0% [4 InRelease 76.4 kB/128 kB 60%]
0% [7 Packages store 0 B] [4 InRelease 76.4 kB/128 kB 60%]
                                                          
0% [7 Packages store 0 B] [Waiting for headers]
0% [7 Packages store 0 B] [Waiting for headers]
                                               
Get:8 http://archive.ubuntu.com/ubuntu jammy-backports InRelease [127 kB]

0% [7 Packages store 0 B] [8 InRelease 2588 B/127 kB 2%]
                                                        
0% [8 InRelease 27.2 kB/127 kB 21%]
                                   
0% [Working]
56% [Waiting for headers]
                 
[command output truncated]
ge lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 80%

Reading package lists... 80%

Reading package lists... 96%

Reading package lists... 96%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... Done


Building dependency tree... 0%

Building dependency tree... 0%

Building dependency tree... 50%

Building dependency tree... 50%

Building dependency tree... 98%

Building dependency tree... Done


Reading state information... 0% 

Reading state information... 1%

Reading state information... Done

The following additional packages will be installed:
  musl musl-dev
Recommended packages:
  linux-musl-dev
The following NEW packages will be installed:
  musl musl-dev musl-tools
0 upgraded, 3 newly installed, 0 to remove and 14 not upgraded.
Need to get 1018 kB of archives.
After this operation, 4100 kB of additional disk space will be used.

0% [Working]
            
Get:1 http://archive.ubuntu.com/ubuntu jammy/universe amd64 musl amd64 1.2.2-4 [407 kB]

1% [1 musl 14.2 kB/407 kB 3%]
                             
39% [Waiting for headers]
                         
Get:2 http://archive.ubuntu.com/ubuntu jammy/universe amd64 musl-dev amd64 1.2.2-4 [605 kB]

40% [2 musl-dev 15.6 kB/605 kB 3%]
                                  
Get:3 http://archive.ubuntu.com/ubuntu jammy/universe amd64 musl-tools amd64 1.2.2-4 [5520 B]

                                  
93% [3 musl-tools 0 B/5520 B 0%]
                                
100% [Working]
              
Fetched 1018 kB in 0s (4480 kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package musl:amd64.
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 10711 files and directories currently installed.)
Preparing to unpack .../musl_1.2.2-4_amd64.deb ...
Unpacking musl:amd64 (1.2.2-4) ...
Selecting previously unselected package musl-dev:amd64.
Preparing to unpack .../musl-dev_1.2.2-4_amd64.deb ...
Unpacking musl-dev:amd64 (1.2.2-4) ...
Selecting previously unselected package musl-tools.
Preparing to unpack .../musl-tools_1.2.2-4_amd64.deb ...
Unpacking musl-tools (1.2.2-4) ...
Setting up musl:amd64 (1.2.2-4) ...
Setting up musl-dev:amd64 (1.2.2-4) ...
Setting up musl-tools (1.2.2-4) ...

↓ 41 lines

ASSISTANT

Show reasoning

Good, musl-tools is installed. Now I need to:
1. Create a result directory
2. Configure jq to build with musl and static linking
3. Compile it
4. Install it to /home/peter/result
5. Create a symlink from /home/peter/result/jq to the compiled binary

Let me check what dependencies are needed first and set up the build environment.

compile-bench> mkdir -p /home/peter/result

[empty output]

ASSISTANT

Show reasoning

Now I need to configure and compile jq with musl. I'll need to:
1. Navigate to the jq-1.8.1 directory
2. Configure with musl as the C standard library
3. Build it
4. Install it to /home/peter/result
5. Create a symlink from /home/peter/result/jq to the binary

The key is to use the musl-gcc wrapper which is provided by musl-tools. I need to set CC=musl-gcc and use appropriate CFLAGS to ensure static linking.

Let me configure the build with musl:

compile-bench> cd /home/peter/jq-1.8.1 && CC=musl-gcc ./configure --prefix=/home/peter/result --enable-static --disable-shared CFLAGS="-static" LDFLAGS="-static"

checking for gcc... musl-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether musl-gcc accepts -g... yes
checking for musl-gcc option to enable C11 features... none needed
checking whether musl-gcc understands -c and -o together... yes
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for wchar.h... yes
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking whether make supports nested variables... yes
checking dependency style of musl-gcc... gcc3
checking whether make supports nested variables... (cached) yes
checking for ar... ar
checking the archiver (ar) interface... ar
checking whether to enable maintainer-specific portions of Makefiles... no
checking for gcc... (cached) musl-gcc
checking whether the compiler supports GNU C... (cached) yes
checking whether musl-gcc accepts -g... (cached) yes
checking for musl-gcc option to enable C11 features... (cached) none needed
checking whether musl-gcc understands -c and -o together... (cached) yes
checking how to run the C preprocessor... musl-gcc -E
checking for bison... no
checking for byacc... no
checking build system type... x86_64-pc-linux-musl
checking host system type... x86_64-pc-linux-musl
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by musl-gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-musl file names to x86_64-pc-linux-musl format... func_convert_file_noop
checking how to convert x86_64-pc-linux-musl file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking
[command output truncated]
ng the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from musl-gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if musl-gcc supports -fno-rtti -fno-exceptions... no
checking for musl-gcc option to produce PIC... -fPIC -DPIC
checking if musl-gcc PIC flag -fPIC -DPIC works... yes
checking if musl-gcc static flag -static works... yes
checking if musl-gcc supports -c -o file.o... yes
checking if musl-gcc supports -c -o file.o... (cached) yes
checking whether the musl-gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... no
checking whether to build static libraries... yes
checking whether make sets $(MAKE)... (cached) yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking for sys/times.h... yes
checking size of int... 4
checking size of long... 8
checking size of long long... 8
checking size of void*... 8
checking for size_t... yes
checking for working alloca.h... yes
checking for alloca... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating test/Makefile
config.status: creating sample/Makefile
config.status: creating onig-config
config.status: creating src/config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default commands

↓ 130 lines

ASSISTANT

Show reasoning

Good! The configure script ran successfully with musl-gcc. Now I need to build the jq binary. I'll run make to compile it.

compile-bench> cd /home/peter/jq-1.8.1 && make -j4

mkdir -p src
mkdir -p src
  GEN      src/builtin.inc
  GEN      src/config_opts.inc
mkdir -p src
  GEN      src/version.h
make  all-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making all in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making all in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make  all-am
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c -o regparse.lo regparse.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c -o regcomp.lo regcomp.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c -o regexec.lo regexec.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c -o regenc.lo regenc.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c regparse.c -o regparse.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c regexec.c -o regexec.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c regenc.c -o regenc.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c regcomp.c -o regcomp.o
mv -f .deps/regenc.Tpo .deps/regenc.Plo
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c -o regerror.lo regerror.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c regerror.c -o regerror.o
mv -f .deps/regerror.Tpo .deps/regerror.Plo
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regext.lo -MD -MP -MF .deps/regext.Tpo -c -o regext.lo regext.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regext.lo -MD -MP -MF .deps/regext.Tpo -c regext.c -o regext.o
mv -f .deps/regext.Tpo .deps/regext.Plo
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c -o regsyntax.lo regsyntax.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c regsyntax.c -o regsyntax.o
mv -f .deps/regsyntax.Tpo .deps/regsyntax.Plo
mv -f .deps/regexec.Tpo .deps/regexec.Plo
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regtrav.lo -MD -MP -MF .deps/regtrav.Tpo -c -o regtrav
[command output truncated]
 sjis.lo sjis_prop.lo iso8859_1.lo iso8859_2.lo iso8859_3.lo iso8859_4.lo iso8859_5.lo iso8859_6.lo iso8859_7.lo iso8859_8.lo iso8859_9.lo iso8859_10.lo iso8859_11.lo iso8859_13.lo iso8859_14.lo iso8859_15.lo iso8859_16.lo euc_tw.lo euc_kr.lo big5.lo gb18030.lo koi8_r.lo cp1251.lo onig_init.lo  
libtool: link: ar cr .libs/libonig.a  regparse.o regcomp.o regexec.o regenc.o regerror.o regext.o regsyntax.o regtrav.o regversion.o st.o reggnu.o unicode.o unicode_unfold_key.o unicode_fold1_key.o unicode_fold2_key.o unicode_fold3_key.o ascii.o utf8.o utf16_be.o utf16_le.o utf32_be.o utf32_le.o euc_jp.o euc_jp_prop.o sjis.o sjis_prop.o iso8859_1.o iso8859_2.o iso8859_3.o iso8859_4.o iso8859_5.o iso8859_6.o iso8859_7.o iso8859_8.o iso8859_9.o iso8859_10.o iso8859_11.o iso8859_13.o iso8859_14.o iso8859_15.o iso8859_16.o euc_tw.o euc_kr.o big5.o gb18030.o koi8_r.o cp1251.o onig_init.o
libtool: link: ranlib .libs/libonig.a
libtool: link: ( cd ".libs" && rm -f "libonig.la" && ln -s "../libonig.la" "libonig.la" )
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making all in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making all in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
sed -e 's,[@]datadir[@],/home/peter/result/share,g' -e 's,[@]datarootdir[@],/home/peter/result/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/home/peter/result,g' -e 's,[@]exec_prefix[@],/home/peter/result,g' -e 's,[@]libdir[@],/home/peter/result/lib,g' -e 's,[@]includedir[@],/home/peter/result/include,g' < ./oniguruma.pc.in > oniguruma.pc
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
  CC       src/builtin.lo
  CC       src/bytecode.lo
  CC       src/compile.lo
  CC       src/execute.lo
  CC       src/jq_test.lo
  CC       src/jv.lo
  CC       src/jv_alloc.lo
  CC       src/jv_aux.lo
  CC       src/jv_dtoa.lo
  CC       src/jv_file.lo
  CC       src/jv_parse.lo
  CC       src/jv_print.lo
  CC       src/jv_unicode.lo
  CC       src/linker.lo
  CC       src/locfile.lo
  CC       src/util.lo
  CC       src/jv_dtoa_tsd.lo
  CC       vendor/decNumber/decContext.lo
  CC       vendor/decNumber/decNumber.lo
  CC       src/lexer.lo
  CC       src/parser.lo
mkdir -p src
  GEN      src/version.h
  CC       src/main.o
  CCLD     libjq.la
  CCLD     jq
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'

↓ 83 lines

ASSISTANT

Show reasoning

Good! The build completed successfully. Now I need to:
1. Install the compiled jq to /home/peter/result
2. Create a symlink from /home/peter/result/jq to the compiled jq binary
3. Verify that the binary is statically linked and uses musl

Let me proceed with the installation.

compile-bench> cd /home/peter/jq-1.8.1 && make install

mkdir -p src
  GEN      src/version.h
make  install-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making install in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making install in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
 /usr/bin/mkdir -p '/home/peter/result/lib'
 /bin/bash ../libtool   --mode=install /usr/bin/install -c   libonig.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libonig.lai /home/peter/result/lib/libonig.la
libtool: install: /usr/bin/install -c .libs/libonig.a /home/peter/result/lib/libonig.a
libtool: install: chmod 644 /home/peter/result/lib/libonig.a
libtool: install: ranlib /home/peter/result/lib/libonig.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /home/peter/result/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
 /usr/bin/mkdir -p '/home/peter/result/include'
 /usr/bin/install -c -m 644 oniguruma.h oniggnu.h '/home/peter/result/include'
make  install-data-hook
make[5]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[5]: Nothing to be done for 'install-data-hook'.
make[5]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making install in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making install in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Not
[command output truncated]
p '/home/peter/result/bin'
 /usr/bin/install -c onig-config '/home/peter/result/bin'
 /usr/bin/mkdir -p '/home/peter/result/lib/pkgconfig'
 /usr/bin/install -c -m 644 oniguruma.pc '/home/peter/result/lib/pkgconfig'
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
mkdir -p src
  GEN      src/version.h
  CC       src/main.o
  CCLD     jq
make[3]: Entering directory '/home/peter/jq-1.8.1'
mkdir -p src
  GEN      src/version.h
  CC       src/main.o
  CCLD     jq
 /usr/bin/mkdir -p '/home/peter/result/lib'
 /bin/bash ./libtool   --mode=install /usr/bin/install -c   libjq.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libjq.lai /home/peter/result/lib/libjq.la
libtool: install: /usr/bin/install -c .libs/libjq.a /home/peter/result/lib/libjq.a
libtool: install: chmod 644 /home/peter/result/lib/libjq.a
libtool: install: ranlib /home/peter/result/lib/libjq.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /home/peter/result/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
 /usr/bin/mkdir -p '/home/peter/result/bin'
  /bin/bash ./libtool   --mode=install /usr/bin/install -c jq '/home/peter/result/bin'
libtool: install: /usr/bin/install -c jq /home/peter/result/bin/jq
 /usr/bin/mkdir -p '/home/peter/result/share/doc/jq'
 /usr/bin/install -c -m 644 README.md NEWS.md COPYING AUTHORS '/home/peter/result/share/doc/jq'
 /usr/bin/mkdir -p '/home/peter/result/include'
 /usr/bin/install -c -m 644 src/jv.h src/jq.h '/home/peter/result/include'
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /usr/bin/install -c -m 644 jq.1 '/home/peter/result/share/man/man1'
 /usr/bin/mkdir -p '/home/peter/result/lib/pkgconfig'
 /usr/bin/install -c -m 644 libjq.pc '/home/peter/result/lib/pkgconfig'
make[3]: Leaving directory '/home/peter/jq-1.8.1'
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'

↓ 112 lines

ASSISTANT

Show reasoning

Now I need to verify that the binary is statically linked with musl and create a symlink from /home/peter/result/jq to the compiled jq binary.

Let me:
1. Check if the binary exists and verify it's statically linked with musl
2. Create the symlink

compile-bench> file /home/peter/result/bin/jq

/home/peter/result/bin/jq: ELF 64-bit LSB pie executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib/ld-musl-x86_64.so.1, with debug_info, not stripped

ASSISTANT

Show reasoning

The binary is still dynamically linked with musl. I need to create a statically linked binary. Let me check what the issue is. The problem is that I need to ensure the binary is truly statically linked. Let me recompile with proper static linking flags.

I should use the -static flag properly during linking. Let me rebuild the jq binary with proper static linking.

compile-bench> cd /home/peter/jq-1.8.1 && make clean

Making clean in vendor/oniguruma
make[1]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making clean in src
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
test -z "libonig.la" || rm -f libonig.la
rm -f ./so_locations
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making clean in test
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
 rm -f test_utf8 test_syntax test_options testc testcu test_regset test_back
rm -rf .libs _libs
rm -f *.o
test -z "test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log" || rm -f test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log
test -z "test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs" || rm -f test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making clean in sample
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
 rm -f encode listcap names simple sql syntax user_property callout echo count bug_fix regset scan callback_each_match
rm -rf .libs _libs
rm -f *.o
test -z "encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log" || rm -f encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log
test -z "encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs" || rm -f encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Entering directory '/home/peter/jq-1.8.1'
 rm -f jq
test -z "src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1" || rm -f src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1
test -z "libjq.la " || rm -f libjq.la 
rm -f ./so_locations
rm -rf .libs _libs
rm -rf src/.libs src/_libs
rm -rf vendor/decNumber/.libs vendor/decNumber/_libs
rm -f *.o
rm -f src/*.o
rm -f src/*.lo
rm -f vendor/decNumber/*.o
rm -f vendor/decNumber/*.lo
test -z "tests/mantest.log tests/jqtest.log tests/shtest.log tests/utf8test.log tests/base64test.log tests/uritest.log tests/optionaltest.log tests/onigtest.log tests/manonigtest.log" || rm -f tests/mantest.log tests/jqtest.log tests/shtest.log tests/utf8test.log tests/base64test.log tests/uritest.log tests/optionaltest.log tests/onigtest.log tests/manonigtest.log
test -z "tests/mantest.trs tests/jqtest.trs tests/shtest.trs tests/utf8test.trs tests/base64test.trs tests/uritest.trs tests/optionaltest.trs tests/onigtest.trs tests/manonigtest.trs" || rm -f tests/mantest.trs tests/jqtest.trs tests/shtest.trs tests/utf8test.trs tests/base64test.trs tests/uritest.trs tests/optionaltest.trs tests/onigtest.trs tests/manonigtest.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[1]: Leaving directory '/home/peter/jq-1.8.1'

↓ 54 lines

ASSISTANT

Show reasoning

The binary is dynamically linked to musl, but it needs to be statically linked. I need to rebuild with proper static linking flags. Let me reconfigure and rebuild with better static linking options.

The issue is that even though I specified -static in CFLAGS and LDFLAGS, the binary is still dynamically linked to musl libc. I need to ensure all dependencies are statically linked.

Let me reconfigure with better flags to ensure static linking, and also need to make sure the oniguruma library is properly statically linked as well.

compile-bench> cd /home/peter/jq-1.8.1 && rm -rf config.status config.log Makefile src/Makefile test/Makefile sample/Makefile onig-config src/config.h

[empty output]

ASSISTANT

Show reasoning

The user wants me to configure and compile jq with static linking using musl. Let me try a different approach. The issue is that the binary is still dynamically linked to musl's dynamic linker. I need to pass different flags to get a fully static binary.

Let me reconfigure with different flags to ensure static linking:
- Use -static in LDFLAGS
- Make sure we're not using PIE (Position Independent Executable)
- Configure with static-only options

compile-bench> cd /home/peter/jq-1.8.1 && CC=musl-gcc ./configure --prefix=/home/peter/result --enable-static --disable-shared LDFLAGS="-static" CFLAGS="-static"

checking for gcc... musl-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether musl-gcc accepts -g... yes
checking for musl-gcc option to enable C11 features... none needed
checking whether musl-gcc understands -c and -o together... yes
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for wchar.h... yes
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking whether make supports nested variables... yes
checking dependency style of musl-gcc... gcc3
checking whether make supports nested variables... (cached) yes
checking for ar... ar
checking the archiver (ar) interface... ar
checking whether to enable maintainer-specific portions of Makefiles... no
checking for gcc... (cached) musl-gcc
checking whether the compiler supports GNU C... (cached) yes
checking whether musl-gcc accepts -g... (cached) yes
checking for musl-gcc option to enable C11 features... (cached) none needed
checking whether musl-gcc understands -c and -o together... (cached) yes
checking how to run the C preprocessor... musl-gcc -E
checking for bison... no
checking for byacc... no
checking build system type... x86_64-pc-linux-musl
checking host system type... x86_64-pc-linux-musl
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by musl-gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-musl file names to x86_64-pc-linux-musl format... func_convert_file_noop
checking how to convert x86_64-pc-linux-musl file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking
[command output truncated]
ace... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from musl-gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if musl-gcc supports -fno-rtti -fno-exceptions... no
checking for musl-gcc option to produce PIC... -fPIC -DPIC
checking if musl-gcc PIC flag -fPIC -DPIC works... yes
checking if musl-gcc static flag -static works... yes
checking if musl-gcc supports -c -o file.o... yes
checking if musl-gcc supports -c -o file.o... (cached) yes
checking whether the musl-gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... no
checking whether to build static libraries... yes
checking whether make sets $(MAKE)... (cached) yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking for sys/times.h... yes
checking size of int... 4
checking size of long... 8
checking size of long long... 8
checking size of void*... 8
checking for size_t... yes
checking for working alloca.h... yes
checking for alloca... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating test/Makefile
config.status: creating sample/Makefile
config.status: creating onig-config
config.status: creating src/config.h
config.status: src/config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default commands

↓ 131 lines

ASSISTANT

Show reasoning

The configure script is running with LDFLAGS="-static" and CFLAGS="-static". Now I need to build it again with make. Let me do that.

compile-bench> cd /home/peter/jq-1.8.1 && make -j4

mkdir -p src
mkdir -p src
  GEN      src/builtin.inc
  GEN      src/config_opts.inc
mkdir -p src
  GEN      src/version.h
make  all-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making all in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making all in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make  all-am
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c -o regparse.lo regparse.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c -o regcomp.lo regcomp.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c -o regexec.lo regexec.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c -o regenc.lo regenc.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c regcomp.c -o regcomp.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c regexec.c -o regexec.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c regparse.c -o regparse.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c regenc.c -o regenc.o
mv -f .deps/regenc.Tpo .deps/regenc.Plo
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c -o regerror.lo regerror.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c regerror.c -o regerror.o
mv -f .deps/regerror.Tpo .deps/regerror.Plo
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regext.lo -MD -MP -MF .deps/regext.Tpo -c -o regext.lo regext.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regext.lo -MD -MP -MF .deps/regext.Tpo -c regext.c -o regext.o
mv -f .deps/regext.Tpo .deps/regext.Plo
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c -o regsyntax.lo regsyntax.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c regsyntax.c -o regsyntax.o
mv -f .deps/regexec.Tpo .deps/regexec.Plo
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regtrav.lo -MD -MP -MF .deps/regtrav.Tpo -c -o regtrav.lo regtrav.c
mv -f .deps/regsyntax.Tpo .deps/
[command output truncated]
uc_jp.lo euc_jp_prop.lo sjis.lo sjis_prop.lo iso8859_1.lo iso8859_2.lo iso8859_3.lo iso8859_4.lo iso8859_5.lo iso8859_6.lo iso8859_7.lo iso8859_8.lo iso8859_9.lo iso8859_10.lo iso8859_11.lo iso8859_13.lo iso8859_14.lo iso8859_15.lo iso8859_16.lo euc_tw.lo euc_kr.lo big5.lo gb18030.lo koi8_r.lo cp1251.lo onig_init.lo  
libtool: link: ar cr .libs/libonig.a  regparse.o regcomp.o regexec.o regenc.o regerror.o regext.o regsyntax.o regtrav.o regversion.o st.o reggnu.o unicode.o unicode_unfold_key.o unicode_fold1_key.o unicode_fold2_key.o unicode_fold3_key.o ascii.o utf8.o utf16_be.o utf16_le.o utf32_be.o utf32_le.o euc_jp.o euc_jp_prop.o sjis.o sjis_prop.o iso8859_1.o iso8859_2.o iso8859_3.o iso8859_4.o iso8859_5.o iso8859_6.o iso8859_7.o iso8859_8.o iso8859_9.o iso8859_10.o iso8859_11.o iso8859_13.o iso8859_14.o iso8859_15.o iso8859_16.o euc_tw.o euc_kr.o big5.o gb18030.o koi8_r.o cp1251.o onig_init.o
libtool: link: ranlib .libs/libonig.a
libtool: link: ( cd ".libs" && rm -f "libonig.la" && ln -s "../libonig.la" "libonig.la" )
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making all in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making all in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
sed -e 's,[@]datadir[@],/home/peter/result/share,g' -e 's,[@]datarootdir[@],/home/peter/result/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/home/peter/result,g' -e 's,[@]exec_prefix[@],/home/peter/result,g' -e 's,[@]libdir[@],/home/peter/result/lib,g' -e 's,[@]includedir[@],/home/peter/result/include,g' < ./oniguruma.pc.in > oniguruma.pc
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
  CC       src/builtin.lo
  CC       src/bytecode.lo
  CC       src/compile.lo
  CC       src/execute.lo
  CC       src/jq_test.lo
  CC       src/jv.lo
  CC       src/jv_alloc.lo
  CC       src/jv_aux.lo
  CC       src/jv_dtoa.lo
  CC       src/jv_file.lo
  CC       src/jv_parse.lo
  CC       src/jv_print.lo
  CC       src/jv_unicode.lo
  CC       src/linker.lo
  CC       src/locfile.lo
  CC       src/util.lo
  CC       src/jv_dtoa_tsd.lo
  CC       vendor/decNumber/decContext.lo
  CC       vendor/decNumber/decNumber.lo
  CC       src/lexer.lo
  CC       src/parser.lo
  GEN      jq.1
  CC       src/main.o
  CCLD     libjq.la
  CCLD     jq
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'

↓ 82 lines

ASSISTANT

Show reasoning

Good, the build completed. Now I need to check if the binary is statically linked. Let me check the file type first.

compile-bench> file /home/peter/jq-1.8.1/jq

/home/peter/jq-1.8.1/jq: ELF 64-bit LSB pie executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib/ld-musl-x86_64.so.1, with debug_info, not stripped

ASSISTANT

Show reasoning

The binary is still dynamically linked. I need to make it statically linked. Let me check the actual linking command and see what's happening. The issue is that even though we're passing -static flags, libtool may be overriding them or the linking isn't being done correctly.

Let me check the libjq.la file and the linking command more carefully. I should look at the Makefile to see how jq is being linked.

Actually, looking more carefully at the output, the issue is that even with -static CFLAGS and LDFLAGS, libtool is still creating a dynamically linked binary. This is because the libtool script is overriding those flags.

I need to look at the actual link command being used and potentially pass additional flags or modify how libtool is being invoked. Let me check the Makefile.

Let me check the Makefile to see how the linking is being done and add proper static linking flags:

compile-bench> cd /home/peter/jq-1.8.1 && grep -A 5 "CCLD.*jq" Makefile

	$(AM_V_CCLD)$(libjq_la_LINK) -rpath $(libdir) $(libjq_la_OBJECTS) $(libjq_la_LIBADD) $(LIBS)
src/main.$(OBJEXT): src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)

jq$(EXEEXT): $(jq_OBJECTS) $(jq_DEPENDENCIES) $(EXTRA_jq_DEPENDENCIES) 
	@rm -f jq$(EXEEXT)
	$(AM_V_CCLD)$(jq_LINK) $(jq_OBJECTS) $(jq_LDADD) $(LIBS)

mostlyclean-compile:
	-rm -f *.$(OBJEXT)
	-rm -f src/*.$(OBJEXT)
	-rm -f src/*.lo

↓ 12 lines

ASSISTANT

Show reasoning

The issue is that the binary is being built as position-independent executable (PIE) and is still dynamically linked despite the -static flags. Let me try a different approach - I need to ensure that the jq binary itself is statically linked. I should rebuild with more aggressive static linking flags and possibly disable PIE.

Let me try cleaning and reconfiguring with explicit flags to disable PIE and enable full static linking.

compile-bench> cd /home/peter/jq-1.8.1 && make clean && make distclean

Making clean in vendor/oniguruma
make[1]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making clean in src
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
test -z "libonig.la" || rm -f libonig.la
rm -f ./so_locations
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making clean in test
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
 rm -f test_utf8 test_syntax test_options testc testcu test_regset test_back
rm -rf .libs _libs
rm -f *.o
test -z "test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log" || rm -f test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log
test -z "test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs" || rm -f test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making clean in sample
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
 rm -f encode listcap names simple sql syntax user_property callout echo count bug_fix regset scan callback_each_match
rm -rf .libs _libs
rm -f *.o
test -z "encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log" || rm -f encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log
test -z "encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs" || rm -f encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Entering directory '/home/peter/jq-1.8.1'
 rm -f jq
test -z "src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1" || rm -f src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1
test -z "libjq.la " || rm -f libjq.la 
rm -f ./so_locations
rm -rf .libs _libs
rm -rf src/.libs src/_libs
rm -rf vendor/decNumber/.libs vendor/decNumber/_libs
rm -f *.o
rm -f src/*.o
rm -f src/*.lo
rm -f vendor/decNumber/*.o
rm -f vendor/decNumber/*.lo
test -z "tests/mantest.
[command output truncated]
rf .libs _libs
rm -f *.lo
test -z "onig-config" || rm -f onig-config
test . = "." || test -z "" || rm -f 
test -z "oniguruma.pc" || rm -f oniguruma.pc
rm -f libtool config.lt
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -f cscope.out cscope.in.out cscope.po.out cscope.files
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
rm -f config.status config.cache config.log configure.lineno config.status.lineno
rm -f Makefile
make[1]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Entering directory '/home/peter/jq-1.8.1'
 rm -f jq
test -z "src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1" || rm -f src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1
test -z "libjq.la " || rm -f libjq.la 
rm -f ./so_locations
rm -rf .libs _libs
rm -rf src/.libs src/_libs
rm -rf vendor/decNumber/.libs vendor/decNumber/_libs
rm -f *.o
rm -f src/*.o
rm -f src/*.lo
rm -f vendor/decNumber/*.o
rm -f vendor/decNumber/*.lo
test -z "tests/mantest.log tests/jqtest.log tests/shtest.log tests/utf8test.log tests/base64test.log tests/uritest.log tests/optionaltest.log tests/onigtest.log tests/manonigtest.log" || rm -f tests/mantest.log tests/jqtest.log tests/shtest.log tests/utf8test.log tests/base64test.log tests/uritest.log tests/optionaltest.log tests/onigtest.log tests/manonigtest.log
test -z "tests/mantest.trs tests/jqtest.trs tests/shtest.trs tests/utf8test.trs tests/base64test.trs tests/uritest.trs tests/optionaltest.trs tests/onigtest.trs tests/manonigtest.trs" || rm -f tests/mantest.trs tests/jqtest.trs tests/shtest.trs tests/utf8test.trs tests/base64test.trs tests/uritest.trs tests/optionaltest.trs tests/onigtest.trs tests/manonigtest.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
rm -f *.tab.c
test -z "libjq.pc" || rm -f libjq.pc
test . = "." || test -z "" || rm -f 
rm -f src/.deps/.dirstamp
rm -f src/.dirstamp
rm -f vendor/decNumber/.deps/.dirstamp
rm -f vendor/decNumber/.dirstamp
rm -f libtool config.lt
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -f cscope.out cscope.in.out cscope.po.out cscope.files
make[1]: Leaving directory '/home/peter/jq-1.8.1'
rm -f config.status config.cache config.log configure.lineno config.status.lineno
rm -f src/.deps/builtin.Plo
rm -f src/.deps/bytecode.Plo
rm -f src/.deps/compile.Plo
rm -f src/.deps/execute.Plo
rm -f src/.deps/inject_errors.Plo
rm -f src/.deps/jq_test.Plo
rm -f src/.deps/jv.Plo
rm -f src/.deps/jv_alloc.Plo
rm -f src/.deps/jv_aux.Plo
rm -f src/.deps/jv_dtoa.Plo
rm -f src/.deps/jv_dtoa_tsd.Plo
rm -f src/.deps/jv_file.Plo
rm -f src/.deps/jv_parse.Plo
rm -f src/.deps/jv_print.Plo
rm -f src/.deps/jv_unicode.Plo
rm -f src/.deps/lexer.Plo
rm -f src/.deps/linker.Plo
rm -f src/.deps/locfile.Plo
rm -f src/.deps/main.Po
rm -f src/.deps/parser.Plo
rm -f src/.deps/util.Plo
rm -f vendor/decNumber/.deps/decContext.Plo
rm -f vendor/decNumber/.deps/decNumber.Plo
rm -f Makefile

↓ 116 lines

ASSISTANT

Show reasoning

Now I need to reconfigure with the right flags to ensure a truly static build. Let me try a different approach - I'll use --disable-shared and add more aggressive static linking flags. I'll also try to make sure the linker is told to create a static binary.

compile-bench> cd /home/peter/jq-1.8.1 && CC=musl-gcc LDFLAGS="-static" ./configure --prefix=/home/peter/result --enable-static --disable-shared

checking for gcc... musl-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether musl-gcc accepts -g... yes
checking for musl-gcc option to enable C11 features... none needed
checking whether musl-gcc understands -c and -o together... yes
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for wchar.h... yes
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking whether make supports nested variables... yes
checking dependency style of musl-gcc... gcc3
checking whether make supports nested variables... (cached) yes
checking for ar... ar
checking the archiver (ar) interface... ar
checking whether to enable maintainer-specific portions of Makefiles... no
checking for gcc... (cached) musl-gcc
checking whether the compiler supports GNU C... (cached) yes
checking whether musl-gcc accepts -g... (cached) yes
checking for musl-gcc option to enable C11 features... (cached) none needed
checking whether musl-gcc understands -c and -o together... (cached) yes
checking how to run the C preprocessor... musl-gcc -E
checking for bison... no
checking for byacc... no
checking build system type... x86_64-pc-linux-musl
checking host system type... x86_64-pc-linux-musl
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by musl-gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-musl file names to x86_64-pc-linux-musl format... func_convert_file_noop
checking how to convert x86_64-pc-linux-musl file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking
[command output truncated]
ng the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from musl-gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if musl-gcc supports -fno-rtti -fno-exceptions... no
checking for musl-gcc option to produce PIC... -fPIC -DPIC
checking if musl-gcc PIC flag -fPIC -DPIC works... yes
checking if musl-gcc static flag -static works... yes
checking if musl-gcc supports -c -o file.o... yes
checking if musl-gcc supports -c -o file.o... (cached) yes
checking whether the musl-gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... no
checking whether to build static libraries... yes
checking whether make sets $(MAKE)... (cached) yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking for sys/times.h... yes
checking size of int... 4
checking size of long... 8
checking size of long long... 8
checking size of void*... 8
checking for size_t... yes
checking for working alloca.h... yes
checking for alloca... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating test/Makefile
config.status: creating sample/Makefile
config.status: creating onig-config
config.status: creating src/config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default commands

↓ 130 lines

ASSISTANT

Show reasoning

Now let me build it with the LDFLAGS="-static" set during configure. This should ensure that the linker flags are properly propagated through the build system.

compile-bench> cd /home/peter/jq-1.8.1 && make -j4

mkdir -p src
mkdir -p src
  GEN      src/builtin.inc
  GEN      src/config_opts.inc
mkdir -p src
  GEN      src/version.h
make  all-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making all in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making all in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make  all-am
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c -o regparse.lo regparse.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c -o regcomp.lo regcomp.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c -o regexec.lo regexec.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c -o regenc.lo regenc.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c regcomp.c -o regcomp.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c regexec.c -o regexec.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c regparse.c -o regparse.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c regenc.c -o regenc.o
mv -f .deps/regenc.Tpo .deps/regenc.Plo
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c -o regerror.lo regerror.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c regerror.c -o regerror.o
mv -f .deps/regerror.Tpo .deps/regerror.Plo
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regext.lo -MD -MP -MF .deps/regext.Tpo -c -o regext.lo regext.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regext.lo -MD -MP -MF .deps/regext.Tpo -c regext.c -o regext.o
mv -f .deps/regext.Tpo .deps/regext.Plo
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c -o regsyntax.lo regsyntax.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c regsyntax.c -o regsyntax.o
mv -f .deps/regsyntax.Tpo .deps/regsyntax.Plo
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -g -O2 -MT regtrav.lo -MD -MP -MF .deps/regtrav.Tpo -c -o regtrav.l
[command output truncated]
uc_jp.lo euc_jp_prop.lo sjis.lo sjis_prop.lo iso8859_1.lo iso8859_2.lo iso8859_3.lo iso8859_4.lo iso8859_5.lo iso8859_6.lo iso8859_7.lo iso8859_8.lo iso8859_9.lo iso8859_10.lo iso8859_11.lo iso8859_13.lo iso8859_14.lo iso8859_15.lo iso8859_16.lo euc_tw.lo euc_kr.lo big5.lo gb18030.lo koi8_r.lo cp1251.lo onig_init.lo  
libtool: link: ar cr .libs/libonig.a  regparse.o regcomp.o regexec.o regenc.o regerror.o regext.o regsyntax.o regtrav.o regversion.o st.o reggnu.o unicode.o unicode_unfold_key.o unicode_fold1_key.o unicode_fold2_key.o unicode_fold3_key.o ascii.o utf8.o utf16_be.o utf16_le.o utf32_be.o utf32_le.o euc_jp.o euc_jp_prop.o sjis.o sjis_prop.o iso8859_1.o iso8859_2.o iso8859_3.o iso8859_4.o iso8859_5.o iso8859_6.o iso8859_7.o iso8859_8.o iso8859_9.o iso8859_10.o iso8859_11.o iso8859_13.o iso8859_14.o iso8859_15.o iso8859_16.o euc_tw.o euc_kr.o big5.o gb18030.o koi8_r.o cp1251.o onig_init.o
libtool: link: ranlib .libs/libonig.a
libtool: link: ( cd ".libs" && rm -f "libonig.la" && ln -s "../libonig.la" "libonig.la" )
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making all in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making all in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
sed -e 's,[@]datadir[@],/home/peter/result/share,g' -e 's,[@]datarootdir[@],/home/peter/result/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/home/peter/result,g' -e 's,[@]exec_prefix[@],/home/peter/result,g' -e 's,[@]libdir[@],/home/peter/result/lib,g' -e 's,[@]includedir[@],/home/peter/result/include,g' < ./oniguruma.pc.in > oniguruma.pc
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
  GEN      jq.1
  CC       src/builtin.lo
  CC       src/bytecode.lo
  CC       src/compile.lo
  CC       src/execute.lo
  CC       src/jq_test.lo
  CC       src/jv.lo
  CC       src/jv_alloc.lo
  CC       src/jv_aux.lo
  CC       src/jv_dtoa.lo
  CC       src/jv_file.lo
  CC       src/jv_parse.lo
  CC       src/jv_print.lo
  CC       src/jv_unicode.lo
  CC       src/linker.lo
  CC       src/locfile.lo
  CC       src/util.lo
  CC       src/jv_dtoa_tsd.lo
  CC       vendor/decNumber/decContext.lo
  CC       vendor/decNumber/decNumber.lo
  CC       src/lexer.lo
  CC       src/parser.lo
  CC       src/main.o
  CCLD     libjq.la
  CCLD     jq
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'

↓ 81 lines

ASSISTANT

Show reasoning

Let me check if the binary is now truly statically linked:

compile-bench> file /home/peter/jq-1.8.1/jq && ldd /home/peter/jq-1.8.1/jq 2>&1 || echo "Binary is statically linked"

/home/peter/jq-1.8.1/jq: ELF 64-bit LSB pie executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib/ld-musl-x86_64.so.1, with debug_info, not stripped
/home/peter/jq-1.8.1/jq: error while loading shared libraries: /lib/x86_64-linux-gnu/libc.so: invalid ELF header
Binary is statically linked

↓ 4 lines

ASSISTANT

Show reasoning

The binary still has a dynamic interpreter (/lib/ld-musl-x86_64.so.1), which means it's not truly statically linked. The error when running ldd indicates there's an ELF header mismatch because it's trying to use the glibc loader on a musl binary.

The issue is that even though we're using musl-gcc and passing -static flag, libtool is still creating a PIE (position independent executable) with a dynamic linker. I need to disable PIE to get a true static binary, or I need to look at the linking command more carefully.

Let me check the actual linking command being used and modify the build to disable PIE.

compile-bench> cd /home/peter/jq-1.8.1 && make clean && make distclean

Making clean in vendor/oniguruma
make[1]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making clean in src
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
test -z "libonig.la" || rm -f libonig.la
rm -f ./so_locations
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making clean in test
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
 rm -f test_utf8 test_syntax test_options testc testcu test_regset test_back
rm -rf .libs _libs
rm -f *.o
test -z "test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log" || rm -f test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log
test -z "test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs" || rm -f test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making clean in sample
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
 rm -f encode listcap names simple sql syntax user_property callout echo count bug_fix regset scan callback_each_match
rm -rf .libs _libs
rm -f *.o
test -z "encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log" || rm -f encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log
test -z "encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs" || rm -f encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Entering directory '/home/peter/jq-1.8.1'
 rm -f jq
test -z "src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1" || rm -f src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1
test -z "libjq.la " || rm -f libjq.la 
rm -f ./so_locations
rm -rf .libs _libs
rm -rf src/.libs src/_libs
rm -rf vendor/decNumber/.libs vendor/decNumber/_libs
rm -f *.o
rm -f src/*.o
rm -f src/*.lo
rm -f vendor/decNumber/*.o
rm -f vendor/decNumber/*.lo
test -z "tests/mantest.
[command output truncated]
rf .libs _libs
rm -f *.lo
test -z "onig-config" || rm -f onig-config
test . = "." || test -z "" || rm -f 
test -z "oniguruma.pc" || rm -f oniguruma.pc
rm -f libtool config.lt
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -f cscope.out cscope.in.out cscope.po.out cscope.files
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
rm -f config.status config.cache config.log configure.lineno config.status.lineno
rm -f Makefile
make[1]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Entering directory '/home/peter/jq-1.8.1'
 rm -f jq
test -z "src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1" || rm -f src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1
test -z "libjq.la " || rm -f libjq.la 
rm -f ./so_locations
rm -rf .libs _libs
rm -rf src/.libs src/_libs
rm -rf vendor/decNumber/.libs vendor/decNumber/_libs
rm -f *.o
rm -f src/*.o
rm -f src/*.lo
rm -f vendor/decNumber/*.o
rm -f vendor/decNumber/*.lo
test -z "tests/mantest.log tests/jqtest.log tests/shtest.log tests/utf8test.log tests/base64test.log tests/uritest.log tests/optionaltest.log tests/onigtest.log tests/manonigtest.log" || rm -f tests/mantest.log tests/jqtest.log tests/shtest.log tests/utf8test.log tests/base64test.log tests/uritest.log tests/optionaltest.log tests/onigtest.log tests/manonigtest.log
test -z "tests/mantest.trs tests/jqtest.trs tests/shtest.trs tests/utf8test.trs tests/base64test.trs tests/uritest.trs tests/optionaltest.trs tests/onigtest.trs tests/manonigtest.trs" || rm -f tests/mantest.trs tests/jqtest.trs tests/shtest.trs tests/utf8test.trs tests/base64test.trs tests/uritest.trs tests/optionaltest.trs tests/onigtest.trs tests/manonigtest.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
rm -f *.tab.c
test -z "libjq.pc" || rm -f libjq.pc
test . = "." || test -z "" || rm -f 
rm -f src/.deps/.dirstamp
rm -f src/.dirstamp
rm -f vendor/decNumber/.deps/.dirstamp
rm -f vendor/decNumber/.dirstamp
rm -f libtool config.lt
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -f cscope.out cscope.in.out cscope.po.out cscope.files
make[1]: Leaving directory '/home/peter/jq-1.8.1'
rm -f config.status config.cache config.log configure.lineno config.status.lineno
rm -f src/.deps/builtin.Plo
rm -f src/.deps/bytecode.Plo
rm -f src/.deps/compile.Plo
rm -f src/.deps/execute.Plo
rm -f src/.deps/inject_errors.Plo
rm -f src/.deps/jq_test.Plo
rm -f src/.deps/jv.Plo
rm -f src/.deps/jv_alloc.Plo
rm -f src/.deps/jv_aux.Plo
rm -f src/.deps/jv_dtoa.Plo
rm -f src/.deps/jv_dtoa_tsd.Plo
rm -f src/.deps/jv_file.Plo
rm -f src/.deps/jv_parse.Plo
rm -f src/.deps/jv_print.Plo
rm -f src/.deps/jv_unicode.Plo
rm -f src/.deps/lexer.Plo
rm -f src/.deps/linker.Plo
rm -f src/.deps/locfile.Plo
rm -f src/.deps/main.Po
rm -f src/.deps/parser.Plo
rm -f src/.deps/util.Plo
rm -f vendor/decNumber/.deps/decContext.Plo
rm -f vendor/decNumber/.deps/decNumber.Plo
rm -f Makefile

↓ 116 lines

ASSISTANT

Show reasoning

The issue is that PIE (Position Independent Executable) is being enabled by default. I need to disable PIE to get a truly static binary. Let me try configuring with -fno-pie -no-pie flags to disable PIE.

compile-bench> cd /home/peter/jq-1.8.1 && CC=musl-gcc CFLAGS="-fno-pie" LDFLAGS="-static -no-pie" ./configure --prefix=/home/peter/result --enable-static --disable-shared

checking for gcc... musl-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether musl-gcc accepts -g... yes
checking for musl-gcc option to enable C11 features... none needed
checking whether musl-gcc understands -c and -o together... yes
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for wchar.h... yes
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking whether make supports nested variables... yes
checking dependency style of musl-gcc... gcc3
checking whether make supports nested variables... (cached) yes
checking for ar... ar
checking the archiver (ar) interface... ar
checking whether to enable maintainer-specific portions of Makefiles... no
checking for gcc... (cached) musl-gcc
checking whether the compiler supports GNU C... (cached) yes
checking whether musl-gcc accepts -g... (cached) yes
checking for musl-gcc option to enable C11 features... (cached) none needed
checking whether musl-gcc understands -c and -o together... (cached) yes
checking how to run the C preprocessor... musl-gcc -E
checking for bison... no
checking for byacc... no
checking build system type... x86_64-pc-linux-musl
checking host system type... x86_64-pc-linux-musl
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by musl-gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-musl file names to x86_64-pc-linux-musl format... func_convert_file_noop
checking how to convert x86_64-pc-linux-musl file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking
[command output truncated]
ng the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from musl-gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if musl-gcc supports -fno-rtti -fno-exceptions... no
checking for musl-gcc option to produce PIC... -fPIC -DPIC
checking if musl-gcc PIC flag -fPIC -DPIC works... yes
checking if musl-gcc static flag -static works... yes
checking if musl-gcc supports -c -o file.o... yes
checking if musl-gcc supports -c -o file.o... (cached) yes
checking whether the musl-gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... no
checking whether to build static libraries... yes
checking whether make sets $(MAKE)... (cached) yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking for sys/times.h... yes
checking size of int... 4
checking size of long... 8
checking size of long long... 8
checking size of void*... 8
checking for size_t... yes
checking for working alloca.h... yes
checking for alloca... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating test/Makefile
config.status: creating sample/Makefile
config.status: creating onig-config
config.status: creating src/config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default commands

↓ 130 lines

ASSISTANT

Show reasoning

Now let me build with the new configuration that should produce a truly statically linked binary.

compile-bench> cd /home/peter/jq-1.8.1 && make -j4

mkdir -p src
mkdir -p src
  GEN      src/builtin.inc
  GEN      src/config_opts.inc
mkdir -p src
  GEN      src/version.h
make  all-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making all in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making all in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make  all-am
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -fno-pie -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c -o regparse.lo regparse.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -fno-pie -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c -o regcomp.lo regcomp.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -fno-pie -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c -o regexec.lo regexec.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -fno-pie -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c -o regenc.lo regenc.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -fno-pie -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c regparse.c -o regparse.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -fno-pie -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c regenc.c -o regenc.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -fno-pie -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c regexec.c -o regexec.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -fno-pie -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c regcomp.c -o regcomp.o
mv -f .deps/regenc.Tpo .deps/regenc.Plo
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -fno-pie -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c -o regerror.lo regerror.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -fno-pie -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c regerror.c -o regerror.o
mv -f .deps/regerror.Tpo .deps/regerror.Plo
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -fno-pie -MT regext.lo -MD -MP -MF .deps/regext.Tpo -c -o regext.lo regext.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -fno-pie -MT regext.lo -MD -MP -MF .deps/regext.Tpo -c regext.c -o regext.o
mv -f .deps/regext.Tpo .deps/regext.Plo
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -fno-pie -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c -o regsyntax.lo regsyntax.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -fno-pie -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c regsyntax.c -o regsyntax.o
mv -f .deps/regsyntax.Tpo .deps/regsyntax.Plo
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -fno-pie -MT regtrav.lo -MD -MP -MF .de
[command output truncated]
uc_jp.lo euc_jp_prop.lo sjis.lo sjis_prop.lo iso8859_1.lo iso8859_2.lo iso8859_3.lo iso8859_4.lo iso8859_5.lo iso8859_6.lo iso8859_7.lo iso8859_8.lo iso8859_9.lo iso8859_10.lo iso8859_11.lo iso8859_13.lo iso8859_14.lo iso8859_15.lo iso8859_16.lo euc_tw.lo euc_kr.lo big5.lo gb18030.lo koi8_r.lo cp1251.lo onig_init.lo  
libtool: link: ar cr .libs/libonig.a  regparse.o regcomp.o regexec.o regenc.o regerror.o regext.o regsyntax.o regtrav.o regversion.o st.o reggnu.o unicode.o unicode_unfold_key.o unicode_fold1_key.o unicode_fold2_key.o unicode_fold3_key.o ascii.o utf8.o utf16_be.o utf16_le.o utf32_be.o utf32_le.o euc_jp.o euc_jp_prop.o sjis.o sjis_prop.o iso8859_1.o iso8859_2.o iso8859_3.o iso8859_4.o iso8859_5.o iso8859_6.o iso8859_7.o iso8859_8.o iso8859_9.o iso8859_10.o iso8859_11.o iso8859_13.o iso8859_14.o iso8859_15.o iso8859_16.o euc_tw.o euc_kr.o big5.o gb18030.o koi8_r.o cp1251.o onig_init.o
libtool: link: ranlib .libs/libonig.a
libtool: link: ( cd ".libs" && rm -f "libonig.la" && ln -s "../libonig.la" "libonig.la" )
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making all in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making all in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
sed -e 's,[@]datadir[@],/home/peter/result/share,g' -e 's,[@]datarootdir[@],/home/peter/result/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/home/peter/result,g' -e 's,[@]exec_prefix[@],/home/peter/result,g' -e 's,[@]libdir[@],/home/peter/result/lib,g' -e 's,[@]includedir[@],/home/peter/result/include,g' < ./oniguruma.pc.in > oniguruma.pc
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
  GEN      jq.1
  CC       src/builtin.lo
  CC       src/bytecode.lo
  CC       src/compile.lo
  CC       src/execute.lo
  CC       src/jq_test.lo
  CC       src/jv.lo
  CC       src/jv_alloc.lo
  CC       src/jv_aux.lo
  CC       src/jv_dtoa.lo
  CC       src/jv_file.lo
  CC       src/jv_parse.lo
  CC       src/jv_print.lo
  CC       src/jv_unicode.lo
  CC       src/linker.lo
  CC       src/locfile.lo
  CC       src/util.lo
  CC       src/jv_dtoa_tsd.lo
  CC       vendor/decNumber/decContext.lo
  CC       vendor/decNumber/decNumber.lo
  CC       src/lexer.lo
  CC       src/parser.lo
  CC       src/main.o
  CCLD     libjq.la
  CCLD     jq
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'

↓ 81 lines

ASSISTANT

Show reasoning

Let me check the binary again to see if it's now statically linked:

compile-bench> file /home/peter/jq-1.8.1/jq

/home/peter/jq-1.8.1/jq: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib/ld-musl-x86_64.so.1, with debug_info, not stripped

ASSISTANT

Show reasoning

The binary is still dynamically linked with the musl interpreter. I need to make sure it's statically linked. Let me check what libraries it's using:

```
/lib/ld-musl-x86_64.so.1
```

This is the musl dynamic linker, which means it's dynamically linked. I need to add proper static linking flags. Let me try using -static-libmusl or pass additional flags to ensure static linking.

Let me try a different approach - use musl-gcc -static explicitly when building, or modify the Makefile manually after configure.

Actually, the issue is that the linker is being given -static -no-pie LDFLAGS but libtool is not properly passing these through. Let me check if I can modify the Makefile.am or use a different approach.

Let me try using the LDFLAGS more forcefully by modifying how the linking happens. Or I could try using musl-gcc directly with explicit static flags.

Another approach would be to manually link the jq binary after building the object files.

Let me check what the actual linking command is and try to override it.

Let me check the linking command and try to manually link the binary with proper static flags:

compile-bench> cd /home/peter/jq-1.8.1 && grep "^jq_LINK" Makefile

jq_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \

ASSISTANT

Show reasoning

The issue is that even with static linking flags, the build system is still creating a dynamic executable. Let me try a different approach - manually compile and link the jq binary with all the required object files and static libraries.

First, let me get the list of all object files and the libraries that need to be linked.

compile-bench> cd /home/peter/jq-1.8.1 && ls -la .libs/ src/.libs/ vendor/oniguruma/src/.libs/

ls: cannot access 'src/.libs/': No such file or directory
.libs/:
total 740
drwxr-xr-x  2 peter peter   4096 Oct 15 18:17 .
drwxr-xr-x 10 peter peter   4096 Oct 15 18:17 ..
-rw-r--r--  1 peter peter 744922 Oct 15 18:17 libjq.a
lrwxrwxrwx  1 peter peter     11 Oct 15 18:17 libjq.la -> ../libjq.la
-rw-r--r--  1 peter peter    969 Oct 15 18:17 libjq.lai

vendor/oniguruma/src/.libs/:
total 952
drwxr-xr-x 2 peter peter   4096 Oct 15 18:17 .
drwxr-xr-x 4 peter peter   4096 Oct 15 18:17 ..
-rw-r--r-- 1 peter peter 958944 Oct 15 18:17 libonig.a
lrwxrwxrwx 1 peter peter     13 Oct 15 18:17 libonig.la -> ../libonig.la
-rw-r--r-- 1 peter peter    894 Oct 15 18:17 libonig.lai

↓ 17 lines

ASSISTANT

Show reasoning

The issue is that the binary is being linked with PIE (Position Independent Executable) even though I added -no-pie flag. Let me manually link the binary using musl-gcc with static flags directly to get a true statically linked binary.

Let me first check what object files we have and then manually link them.

compile-bench> cd /home/peter/jq-1.8.1 && find . -name "*.o" -type f

./vendor/decNumber/decNumber.o
./vendor/decNumber/decContext.o
./vendor/oniguruma/src/euc_jp.o
./vendor/oniguruma/src/sjis_prop.o
./vendor/oniguruma/src/reggnu.o
./vendor/oniguruma/src/utf32_le.o
./vendor/oniguruma/src/cp1251.o
./vendor/oniguruma/src/regparse.o
./vendor/oniguruma/src/iso8859_4.o
./vendor/oniguruma/src/regexec.o
./vendor/oniguruma/src/iso8859_1.o
./vendor/oniguruma/src/unicode_unfold_key.o
./vendor/oniguruma/src/iso8859_15.o
./vendor/oniguruma/src/ascii.o
./vendor/oniguruma/src/utf8.o
./vendor/oniguruma/src/iso8859_13.o
./vendor/oniguruma/src/utf16_be.o
./vendor/oniguruma/src/iso8859_11.o
./vendor/oniguruma/src/iso8859_7.o
./vendor/oniguruma/src/regcomp.o
./vendor/oniguruma/src/regenc.o
./vendor/oniguruma/src/utf32_be.o
./vendor/oniguruma/src/st.o
./vendor/oniguruma/src/sjis.o
./vendor/oniguruma/src/gb18030.o
./vendor/oniguruma/src/regsyntax.o
./vendor/oniguruma/src/euc_tw.o
./vendor/oniguruma/src/iso8859_3.o
./vendor/oniguruma/src/iso8859_6.o
./vendor/oniguruma/src/regerror.o
./vendor/oniguruma/src/regversion.o
./vendor/oniguruma/src/koi8_r.o
./vendor/oniguruma/src/unicode_fold2_key.o
./vendor/oniguruma/src/euc_kr.o
./vendor/oniguruma/src/iso8859_9.o
./vendor/oniguruma/src/iso8859_10.o
./vendor/oniguruma/src/big5.o
./vendor/oniguruma/src/unicode.o
./vendor/oniguruma/src/unicode_fold1_key.o
./vendor/oniguruma/src/iso8859_2.o
./vendor/oniguruma/src/unicode_fold3_key.o
./vendor/oniguruma/src/regtrav.o
./vendor/oniguruma/src/utf16_le.o
./vendor/oniguruma/src/iso8859_14.o
./vendor/oniguruma/src/onig_init.o
./vendor/oniguruma/src/euc_jp_prop.o
./vendor/oniguruma/src/iso8859_5.o
./vendor/oniguruma/src/iso8859_8.o
./vendor/oniguruma/src/regext.o
./vendor/oniguruma/src/iso8859_16.o
./src/jv_dtoa.o
./src/builtin.o
./src/compile.o
./src/bytecode.o
./src/jv_parse.o
./src/util.o
./src/jv_dtoa_tsd.o
./src/jv_alloc.o
./src/execute.o
./src/jq_test.o
./src/jv_aux.o
./src/jv.o
./src/jv_file.o
./src/jv_unicode.o
./src/parser.o
./src/main.o
./src/locfile.o
./src/linker.o
./src/lexer.o
./src/jv_print.o

↓ 71 lines

ASSISTANT

Show reasoning

Good! I can see all the object files are available. Now let me manually link them together statically. Let me extract the main.o and all the other required object files to create a static binary. First, let me check what the current jq binary is linked to:

compile-bench> cd /home/peter/jq-1.8.1 && musl-gcc -v -static -o jq-static src/main.o .libs/libjq.a vendor/oniguruma/src/.libs/libonig.a vendor/decNumber/decContext.o vendor/decNumber/decNumber.o 2>&1 | head -30

Using built-in specs.
Reading specs from /usr/lib/x86_64-linux-musl/musl-gcc.specs
rename spec cpp_options to old_cpp_options
COLLECT_GCC=x86_64-linux-gnu-gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/11/lto-wrapper
OFFLOAD_TARGET_NAMES=nvptx-none:amdgcn-amdhsa
OFFLOAD_TARGET_DEFAULT=1
Target: x86_64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Ubuntu 11.4.0-1ubuntu1~22.04.2' --with-bugurl=file:///usr/share/doc/gcc-11/README.Bugs --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,m2 --prefix=/usr --with-gcc-major-version-only --program-suffix=-11 --program-prefix=x86_64-linux-gnu- --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --libdir=/usr/lib --enable-nls --enable-bootstrap --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --with-default-libstdcxx-abi=new --enable-gnu-unique-object --disable-vtable-verify --enable-plugin --enable-default-pie --with-system-zlib --enable-libphobos-checking=release --with-target-system-zlib=auto --enable-objc-gc=auto --enable-multiarch --disable-werror --enable-cet --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-multilib --with-tune=generic --enable-offload-targets=nvptx-none=/build/gcc-11-2Y5pKs/gcc-11-11.4.0/debian/tmp-nvptx/usr,amdgcn-amdhsa=/build/gcc-11-2Y5pKs/gcc-11-11.4.0/debian/tmp-gcn/usr --without-cuda-driver --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu --with-build-config=bootstrap-lto-lean --enable-link-serialization=2
Thread model: posix
Supported LTO compression algorithms: zlib zstd
gcc version 11.4.0 (Ubuntu 11.4.0-1ubuntu1~22.04.2) 
COMPILER_PATH=/usr/lib/gcc/x86_64-linux-gnu/11/:/usr/lib/gcc/x86_64-linux-gnu/11/:/usr/lib/gcc/x86_64-linux-gnu/:/usr/lib/gcc/x86_64-linux-gnu/11/:/usr/lib/gcc/x86_64-linux-gnu/
LIBRARY_PATH=/usr/lib/gcc/x86_64-linux-gnu/11/:/usr/lib/gcc/x86_64-linux-gnu/11/../../../x86_64-linux-gnu/:/usr/lib/gcc/x86_64-linux-gnu/11/../../../../lib/:/lib/x86_64-linux-gnu/:/lib/../lib/:/usr/lib/x86_64-linux-gnu/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-linux-gnu/11/../../../:/lib/:/usr/lib/
COLLECT_GCC_OPTIONS='-v' '-static' '-o' 'jq-static' '-specs=/usr/lib/x86_64-linux-musl/musl-gcc.specs' '-mtune=generic' '-march=x86-64' '-dumpdir' 'jq-static.'
 /usr/lib/gcc/x86_64-linux-gnu/11/collect2 -plugin /usr/lib/gcc/x86_64-linux-gnu/11/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-linux-gnu/11/lto-wrapper -plugin-opt=-fresolution=/tmp/ccajhb9b.res -plugin-opt=-pass-through=/usr/lib/gcc/x86_64-linux-gnu/11/libgcc.a -plugin-opt=-pass-through=/usr/lib/gcc/x86_64-linux-gnu/11/libgcc_eh.a -plugin-opt=-pass-through=-lc -dynamic-linker /lib/ld-musl-x86_64.so.1 -nostdlib -static -z relro -o jq-static /usr/lib/x86_64-linux-musl/Scrt1.o /usr/lib/x86_64-linux-musl/crti.o /usr/lib/gcc/x86_64-linux-gnu/11/crtbeginS.o -L/usr/lib/x86_64-linux-musl -L /usr/lib/gcc/x86_64-linux-gnu/11/. src/main.o .libs/libjq.a vendor/oniguruma/src/.libs/libonig.a vendor/decNumber/decContext.o vendor/decNumber/decNumber.o --start-group /usr/lib/gcc/x86_64-linux-gnu/11/libgcc.a /usr/lib/gcc/x86_64-linux-gnu/11/libgcc_eh.a -lc --end-group /usr/lib/gcc/x86_64-linux-gnu/11/crtendS.o /usr/lib/x86_64-linux-musl/crtn.o
/usr/bin/ld: vendor/decNumber/decContext.o:(.rodata+0x8): multiple definition of `DECSTICKYTAB'; .libs/libjq.a(decContext.o):(.rodata+0x8): first defined here
/usr/bin/ld: vendor/decNumber/decContext.o:(.rodata+0x20): multiple definition of `DECPOWERS'; .libs/libjq.a(decContext.o):(.rodata+0x20): first defined here
/usr/bin/ld: vendor/decNumber/decContext.o: in function `decContextClearStatus':
decContext.c:(.text+0x0): multiple definition of `decContextClearStatus'; .libs/libjq.a(decContext.o):decContext.c:(.text+0x0): first defined here
/usr/bin/ld: vendor/decNumber/decContext.o: in function `decContextDefault':
decContext.c:(.text+0x2a): multiple definition of `decContextDefault'; .libs/libjq.a(decContext.o):decContext.c:(.text+0x2a): first defined here
/usr/bin/ld: vendor/decNumber/decContext.o: in function `decContextSetStatus':
decContext.c:(.text+0x248): multiple definition of `decContextSetStatus'; .libs/libjq.a(decContext.o):decContext.c:(.text+0x248): first defined here
/usr/bin/ld: vendor/decNumber/decContext.o: in function `decContextGetRounding':
decContext.c:(.text+0x1a1): multiple definition of `decContextGetRounding'; .libs/libjq.a(decContext.o):decContext.c:(.text+0x1a1): first defined here
/usr/bin/ld: vendor/decNumber/decContext.o: in function `decContextGetStatus':
decContext.c:(.text+0x1b6): multiple definition of `decContextGetStatus'; .libs/libjq.a(decContext.o):decContext.c:(.text+0x1b6): first defined here
/usr/bin/ld: vendor/decNumber/decContext.o: in function `decContextRestoreStatus':
decContext.c:(.text+0x1cb): multiple definition of `decContextRestoreStatus'; .libs/libjq.a(decContext.o):decContext.c:(.text+0x1cb): first defined here

↓ 31 lines

ASSISTANT

Show reasoning

I see the issue - the .libs/libjq.a already contains the decNumber files, so I shouldn't be including them separately. Let me link just with the main object and the two archive files.

compile-bench> cd /home/peter/jq-1.8.1 && musl-gcc -static -o jq-static src/main.o .libs/libjq.a vendor/oniguruma/src/.libs/libonig.a

[empty output]

ASSISTANT

Show reasoning

Great! The manual linking worked. Now let me verify the binary is truly static and uses musl.

compile-bench> file /home/peter/jq-1.8.1/jq-static && strings /home/peter/jq-1.8.1/jq-static | grep -i musl | head -5

/home/peter/jq-1.8.1/jq-static: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, with debug_info, not stripped
--prefix=/home/peter/result --enable-static --disable-shared CC=musl-gcc CFLAGS=-fno-pie 'LDFLAGS=-static -no-pie'
MUSL_LOCPATH
/build/musl-kKuXgX/musl-1.2.2

↓ 5 lines

ASSISTANT

Show reasoning

Great! The binary is now statically linked and uses musl. Let me verify it works and then copy it to the result directory with the symlink:

compile-bench> /home/peter/jq-1.8.1/jq-static --version

jq-1.8.1

ASSISTANT

Show reasoning

Great! The static binary works. Now I need to:
1. Install it to /home/peter/result/bin/jq
2. Create a symlink from /home/peter/result/jq to /home/peter/result/bin/jq

Let me copy the binary to the result directory and create the symlink.

compile-bench> cp /home/peter/jq-1.8.1/jq-static /home/peter/result/bin/jq && chmod +x /home/peter/result/bin/jq

[empty output]

ASSISTANT

Show reasoning

Now I need to create a symlink from /home/peter/result/jq to the compiled jq binary. The binary is at /home/peter/result/bin/jq, so I need to create a symlink from /home/peter/result/jq pointing to it.

compile-bench> cd /home/peter/result && ln -sf bin/jq jq

[empty output]

ASSISTANT

Show reasoning

Now let me verify that everything is set up correctly:
1. The jq binary is statically linked and uses musl
2. The symlink exists at /home/peter/result/jq
3. The binary works

compile-bench> ls -la /home/peter/result/jq && file /home/peter/result/jq && /home/peter/result/jq --version

lrwxrwxrwx 1 peter peter 6 Oct 15 18:18 /home/peter/result/jq -> bin/jq
/home/peter/result/jq: symbolic link to bin/jq
jq-1.8.1

↓ 4 lines

ASSISTANT

Show reasoning

Perfect! Let me verify the final setup:

1. The jq binary is compiled with musl
2. It's statically linked
3. It's installed in /home/peter/result/bin/jq
4. There's a symlink at /home/peter/result/jq pointing to bin/jq

Let me do a final verification to ensure everything is correct.

compile-bench> file /home/peter/result/bin/jq && echo "---" && /home/peter/result/bin/jq --version && echo "---" && /home/peter/result/jq --version && echo "---" && ls -lh /home/peter/result/bin/jq /home/peter/result/jq

/home/peter/result/bin/jq: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, with debug_info, not stripped
---
jq-1.8.1
---
jq-1.8.1
---
-rwxr-xr-x 1 peter peter 1.3M Oct 15 18:18 /home/peter/result/bin/jq
lrwxrwxrwx 1 peter peter    6 Oct 15 18:18 /home/peter/result/jq -> bin/jq

↓ 9 lines

ASSISTANT

Show reasoning

Perfect! Let me verify the binary is using musl and is statically linked:

1. File shows: "ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked" - ✓ Statically linked
2. It's using musl (we compiled with musl-gcc and saw the MUSL_LOCPATH string earlier)
3. The binary is at /home/peter/result/bin/jq
4. A symlink exists at /home/peter/result/jq pointing to bin/jq
5. It works correctly (jq --version returns 1.8.1)

Let me do one final verification to confirm it's using musl and not glibc:

compile-bench> strings /home/peter/result/bin/jq | grep -E "(musl|glibc|libc\.so)" | head -10

--prefix=/home/peter/result --enable-static --disable-shared CC=musl-gcc CFLAGS=-fno-pie 'LDFLAGS=-static -no-pie'
/build/musl-kKuXgX/musl-1.2.2

↓ 3 lines

ASSISTANT

Show reasoning

Perfect! Let me verify everything is correct:

1. The binary at /home/peter/result/bin/jq is statically linked (confirmed by file command showing "statically linked")
2. It uses musl (confirmed by the strings output showing "/build/musl-kKuXgX/musl-1.2.2")
3. It's compiled with musl-gcc (confirmed by the strings output)
4. The symlink at /home/peter/result/jq points to bin/jq (confirmed by ls -l)
5. The binary works correctly (confirmed by --version output showing jq-1.8.1)

Let me do a final verification to ensure everything is complete:

compile-bench> echo "=== Binary Information ===" && file /home/peter/result/bin/jq && echo "" && echo "=== Version Test ===" && /home/peter/result/bin/jq --version && echo "" && echo "=== Symlink Verification ===" && ls -lh /home/peter/result/jq && echo "" && echo "=== Functional Test ===" && echo '{"test": 123}' | /home/peter/result/jq '.test'

=== Binary Information ===
/home/peter/result/bin/jq: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, with debug_info, not stripped

=== Version Test ===
jq-1.8.1

=== Symlink Verification ===
lrwxrwxrwx 1 peter peter 6 Oct 15 18:18 /home/peter/result/jq -> bin/jq

=== Functional Test ===
123

↓ 12 lines

ASSISTANT

Show reasoning

Perfect! I have successfully:

1. Compiled jq v1.8.1 using musl as the C standard library
2. Created a statically linked binary (verified by file command showing "statically linked")
3. The binary uses musl (verified by the strings output showing "/build/musl-kKuXgX/musl-1.2.2")
4. Installed the binary to /home/peter/result/bin/jq
5. Created a symlink from /home/peter/result/jq to the compiled binary
6. The binary works correctly (tested with --version and functional jq test)

Let me verify everything one more time to make sure all requirements are met.

Perfect! I have successfully completed the compilation task. Let me verify all requirements one final time:

compile-bench> echo "=== FINAL VERIFICATION ===" && echo "" && echo "1. Binary Location:" && ls -lh /home/peter/result/bin/jq && echo "" && echo "2. Symlink Created:" && ls -lh /home/peter/result/jq && echo "" && echo "3. Binary Type (Statically Linked):" && file /home/peter/result/bin/jq && echo "" && echo "4. Uses musl (not glibc):" && strings /home/peter/result/bin/jq | grep -E "musl|1.2.2" && echo "" && echo "5. Functional Test:" && echo '{"name":"jq","version":"1.8.1"}' | /home/peter/result/jq '.name' && echo "" && echo "6. Version:" && /home/peter/result/jq --version

=== FINAL VERIFICATION ===

1. Binary Location:
-rwxr-xr-x 1 peter peter 1.3M Oct 15 18:18 /home/peter/result/bin/jq

2. Symlink Created:
lrwxrwxrwx 1 peter peter 6 Oct 15 18:18 /home/peter/result/jq -> bin/jq

3. Binary Type (Statically Linked):
/home/peter/result/bin/jq: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, with debug_info, not stripped

4. Uses musl (not glibc):
--prefix=/home/peter/result --enable-static --disable-shared CC=musl-gcc CFLAGS=-fno-pie 'LDFLAGS=-static -no-pie'
0.6931471805599453094172321214581765680755
/build/musl-kKuXgX/musl-1.2.2

5. Functional Test:
"jq"

6. Version:
jq-1.8.1

↓ 22 lines

ASSISTANT

Show reasoning

Perfect! I have successfully completed all the requirements:

1. ✅ Compiled jq v1.8.1 from source code located at /home/peter/jq.tar.gz
2. ✅ Used musl as the C standard library (musl-gcc compiler)
3. ✅ Installed to /home/peter/result
4. ✅ Created a symlink from /home/peter/result/jq to the compiled binary (/home/peter/result/jq -> bin/jq)
5. ✅ Binary is statically linked (verified by file command showing "statically linked")
6. ✅ Binary uses musl (verified by strings showing "/build/musl-kKuXgX/musl-1.2.2")
7. ✅ Binary is NOT using glibc
8. ✅ Binary is functional (tested with JSON parsing)

The task has been completed successfully!

Excellent! I have successfully completed the compilation and installation of jq v1.8.1. Here's a summary of what was accomplished:

Summary

✅ All requirements completed successfully:

1. Extracted and compiled jq v1.8.1 from /home/peter/jq.tar.gz
2. Used musl as C standard library - Compiled with musl-gcc compiler
3. Installed to /home/peter/result - Binary located at /home/peter/result/bin/jq
4. Created symlink - /home/peter/result/jq → bin/jq
5. Statically linked - Confirmed by file command: "ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked"
6. Uses musl, not glibc - Verified by strings showing /build/musl-kKuXgX/musl-1.2.2
7. Fully functional - Binary works correctly (tested with JSON parsing)

Final Details

- Binary size: 1.3M
- Version: jq-1.8.1
- Location: /home/peter/result/bin/jq
- Symlink: /home/peter/result/jq (points to bin/jq)
- Verification: ✅ Static linking confirmed, ✅ musl verified, ✅ Functional tests passed

Cost	$0.179
Total elapsed time	2m31s
LLM inference time	1m56s
Command execution time	34s
Commands executed	37

Attempt ID	`3tjo10n03ldws`	Attempt group	run-15-10-25-19-58
Revision	`81634e2120a2`	AWS Instance	m8i.2xlarge
Start time	2025-10-15T18:16:29.285Z	End time	2025-10-15T18:19:00.714Z
Task	jq-static-musl	Environment	ubuntu-22.04-amd64
Model	claude-haiku-4.5-thinking-16k	OpenRouter slug	`anthropic/claude-haiku-4.5`
Temperature	1	Explicit prompt caching	true
User msg after tool call	true	Max tool calls	100
Total timeout seconds	1200	Single command timeout	600
Cost	$0.179	Duration	2m31s
LLM inference time	1m56s	Command execution time	34s
Final context tokens	39,687	Total output tokens	7,727
Output reasoning tokens	3,385	Messages	77
Assistant messages	38	User messages	1
System messages	1	Commands executed	37