<- Ranking
Summary
Task
curl-ssl
Model
claude-sonnet-4.5-thinking-16k logo
claude-sonnet-4.5-thinking-16k
Status
Success
Performance
Cost$0.355
Total elapsed time2m40s
LLM inference time2m0s
Command execution time40s
Commands executed20
All details >
Attempt ID 3oury8yrk2713 Attempt group run-29-09-25-19-32
Revision 0cfc533b3f68 AWS Instance m8i.2xlarge
Start time 2025-09-29T17:49:19.737Z End time 2025-09-29T17:52:01.518Z
Task curl-ssl Environment ubuntu-22.04-amd64
Model claude-sonnet-4.5-thinking-16k logo claude-sonnet-4.5-thinking-16k OpenRouter slug anthropic/claude-sonnet-4.5
Temperature 1 Explicit prompt caching true
User msg after tool call true Max tool calls 70
Total timeout seconds 900 Single command timeout 600
Cost $0.355 Duration 2m40s
LLM inference time 2m0s Command execution time 40s
Final context tokens 21,111 Total output tokens 5,995
Output reasoning tokens 2,777 Messages 43
Assistant messages 21 User messages 1
System messages 1 Commands executed 20
Download full attempt result JSON
Task
Task: curl-ssl

curl 8.16.0 is a command-line HTTP client.
Project link: curl.se

Task:
Compile and install curl to a specific location. Build with SSL support (TLS v1.3), brotli, zlib and zstd.

Difficulties:
Installing dependencies can be tricky.

Environment:
Ubuntu 22.04 on amd64, with internet access.

View task page
Execution log
SYSTEM

You are a package-building specialist operating a Ubuntu 22.04 bash shell via one tool: run_terminal_cmd.
The current working directory of every run_terminal_cmd is /home/peter.
Execution rules:
- Always pass non-interactive flags for any command that could prompt (e.g., -y, --yes, DEBIAN_FRONTEND=noninteractive).
- Don't include any newlines in the command.
- You can use sudo.
If you encounter any errors or issues while doing the user's request, you must fix them and continue the task.
At the end verify you did the user request correctly.

USER

You are given a curl v8.16.0 source code at /home/peter/curl.tar.gz. Please compile curl and install it to /home/peter/result. Create a symlink from /home/peter/result/curl to the actual binary. Make sure it builds with SSL support (TLS v1.3), brotli, zlib and zstd.

ASSISTANT
Show reasoning

The user wants me to:
1. Extract curl v8.16.0 source code from /home/peter/curl.tar.gz
2. Compile curl with specific features:
- SSL support (TLS v1.3)
- brotli
- zlib
- zstd
3. Install it to /home/peter/result
4. Create a symlink from /home/peter/result/curl to the actual binary

Let me break this down:
1. First, I need to extract the tarball
2. Install the necessary dependencies for building curl with these features
3. Configure curl with the appropriate options
4. Build and install
5. Create the symlink
6. Verify the installation has the required features

Let me start by extracting the tarball and installing dependencies.

Dependencies needed:
- Build essentials (gcc, make, etc.)
- OpenSSL development libraries (for SSL/TLS support)
- libbrotli development libraries
- zlib development libraries
- libzstd development libraries
- autoconf, automake, libtool (might be needed for building)

Let me proceed step by step.

I'll help you compile curl with SSL, brotli, zlib, and zstd support. Let me start by extracting the source and installing the necessary dependencies.

compile-bench> cd /home/peter && tar -xzf curl.tar.gz && ls -la
total 4108
drwxr-x---  1 peter peter    4096 Sep 29 17:49 .
drwxr-xr-x  1 root  root     4096 Sep 15 11:21 ..
-rw-r--r--  1 peter peter     220 Jan  6  2022 .bash_logout
-rw-r--r--  1 peter peter    3771 Jan  6  2022 .bashrc
-rw-r--r--  1 peter peter     807 Jan  6  2022 .profile
drwxr-xr-x 14 peter peter    4096 Sep 10 05:43 curl-8.16.0
-rw-r--r--  1 peter peter 4176617 Sep 29 17:49 curl.tar.gz
↓ 9 lines
ASSISTANT
Show reasoning

Good, the curl source has been extracted to curl-8.16.0. Now I need to:
1. Install the necessary build dependencies (SSL/TLS libraries, brotli, zlib, zstd)
2. Configure curl with these features
3. Build it
4. Install it to /home/peter/result
5. Create a symlink from /home/peter/result/curl to the actual binary

Let me install the dependencies first.

compile-bench> sudo apt-get update -y
0% [Working]
            
Hit:1 http://archive.ubuntu.com/ubuntu jammy InRelease

0% [Waiting for headers] [Connecting to security.ubuntu.com (185.125.190.36)]
                                                                             
Get:2 http://archive.ubuntu.com/ubuntu jammy-updates InRelease [128 kB]

0% [2 InRelease 8380 B/128 kB 7%] [Connecting to security.ubuntu.com (185.125.1
                                                                               
0% [2 InRelease 21.4 kB/128 kB 17%] [Waiting for headers]
                                                         
0% [Waiting for headers]
                        
Get:3 http://security.ubuntu.com/ubuntu jammy-security InRelease [129 kB]

0% [Waiting for headers] [3 InRelease 11.3 kB/129 kB 9%]
                                                        
Get:4 http://archive.ubuntu.com/ubuntu jammy-backports InRelease [127 kB]

0% [4 InRelease 5484 B/127 kB 4%] [3 InRelease 14.2 kB/129 kB 11%]
0% [4 InRelease 117 kB/127 kB 92%] [3 InRelease 14.2 kB/129 kB 11%]
                                                                   
0% [3 InRelease 14.2 kB/129 kB 11%]
                                   
Get:5 http://archive.ubuntu.com/ubuntu jammy-updates/universe amd64 Packages [1577 kB]

0% [5 Packages 6999 B/1577 kB 0%] [3 InRelease 14.2 kB/129 kB 11%]
0% [5 Packages 137 kB/1577 kB 9%] [3 InRelease 14.2 kB/129 kB 11%]
                                                                  
Get:6 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 Packages [3690 kB]

0% [6 Packages 194 kB/3690 kB 5%] [3 InRelease 40.2 kB/129 kB 31%]
0% [5 Packages store 0 B] [6 Packages 194 kB/3690 kB 5%] [3 InRelease 40.2 kB/1
0% [5 Packages store 0 B] [Waiting for headers] [3 InRelease 51.8 kB/129 kB 40%
                                                                               
Get:7 http://archive.ubuntu.com/ubuntu jammy-updates/restricted amd64 Packages [5804 kB]

0% [5 Packages store 0 B] [7 Packages 46.7 kB/5804 kB 1%] [3 InRelease 51.8 kB/
                                                                               
0% [7 Packages 1188 kB/5804 kB 20%] [3 InRelease 54.7 kB/129 kB 42%]
0% [6 Packages store 0 B] [7 Packages 1214 kB/5804 kB 21%] [3 InRelease 54.7 kB
                                                                               
Get:8 http://archive.ubuntu.com/ubuntu jammy-updates/multiverse amd64 Packages [69.1 kB]

0% [6 Packages store 0 B] [8 Packages 69.1 kB/69.1 kB 100%] [3 InRelease 69.2 k
                                                                               
Get:9 http://archive.ubuntu.com/ubuntu jammy-backports/universe amd64 Packages [35.2 kB]

                                                                               
0% [6 Packages store 0 B] [3 InRelease 69.2 kB/129 kB 54%]
                                                          
0% [3 InRelease 118 kB/129 kB 92%]
0% [7 Packages store 0 B] [3 InRelease 118 kB/129 kB 92%]
                                                         
0% [7 Packages store 0 B]
58% [7 Packages store 0 B]
                          
Get:10 http://security.ubuntu.com/ubuntu jammy-security/multiverse amd64 Packages [71.0 kB]

58% [7 Packages store 0 B] [10 Packages 2658 B/71.0 kB 4%]
                                                          
59% [10 Packages 50.4 kB/71.0 kB 71%]
59% [8 Packages store 0 B] [10 Packages 50.4 kB/71.0 kB 71%]
                                                            
60% [10 Packages 53.3 kB/71.0 kB 75%]
60% [9 Packages store 0 B] [10 Packages 53.3 kB/71.0 kB 75%]
                                                            
60% [10 Packages 56.2 kB/71.0 kB 79%]
                                     
60% [Working]
60% [10 Packages store 0 B]
                           
61% [Waiting for headers]
                         
Get:11 http://security.ubuntu.com/ubuntu jammy-security/main amd64 Packages [3371 kB]

61% [11 Packages 2655 B/3371 kB 0%]
                                   
73% [Waiting for headers]
                         
Get:12 http://security.ubuntu.com/ubuntu jammy-security/universe amd64 Packages [1274 kB]

73% [12 Packages 1313 B/1274 kB 0%]
73% [11 Packages store 0 B] [12 Packages 1313 B/1274 kB 0%]
                                                           
78% [11 Packages store 0 B] [Waiting for headers]
                                                 
Get:13 http://security.ubuntu.com/ubuntu jammy-security/restricted amd64 Packages [5609 kB]

78% [11 Packages store 0 B] [13 Packages 12.3 kB/5609 kB 0%]
                                                            
87% [13 Packages 2446 kB/5609 kB 44%]
87% [12 Packages store 0 B] [13 Packages 2446 kB/5609 kB 44%]
                                                             
95% [13 Packages 4449 kB/5609 kB 79%]
                                     
99% [Working]
99% [13 Packages store 0 B]
                           
100% [Working]
              
Fetched 21.9 MB in 2s (13.8 MB/s)

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 3%

Reading package lists... 3%

Reading package lists... 4%

Reading package lists... 4%

Reading package lists... 41%

Reading package lists... 41%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 51%

Reading package lists... 51%

Reading package lists... 67%

Reading package lists... 67%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 80%

Reading package lists... 80%

Reading package lists... 96%

Reading package lists... 96%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... Done
↓ 16 lines
ASSISTANT
Show reasoning

The apt-get update completed successfully. Now I need to install the necessary dependencies for building curl with SSL (TLS v1.3), brotli, zlib, and zstd support. Let me install the required packages.

compile-bench> sudo DEBIAN_FRONTEND=noninteractive apt-get install -y build-essential libssl-dev libbrotli-dev zlib1g-dev libzstd-dev autoconf libtool pkg-config
Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 3%

Reading package lists... 3%

Reading package lists... 4%

Reading package lists... 4%

Reading package lists... 41%

Reading package lists... 41%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 51%

Reading package lists... 51%

Reading package lists... 67%

Reading package lists... 67%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 80%

Reading package lists... 80%

Reading package lists... 96%

Reading package lists... 96%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... Done


Building dependency tree... 0%

Building dependency tree... 0%

Building dependency tree... 50%

Building dependency tree... 50%

Building dependency tree... Done


Reading state information... 0% 

Reading state information... 1%

Reading state information... Done

build-essential is already the newest version (12.9ubuntu3).
The following additional packages will be installed:
  automake autotools-dev libglib2.0-0 libglib2.0-data libicu70 libltdl-dev
  libltdl7 libsigsegv2 libxml2 m4 shared-mime-info xdg-user-dirs
Suggested packages:
  autoconf-archive gnu-standards autoconf-doc gettext libtool-doc libssl-doc
  gfortran | fortran95-compiler gcj-jdk m4-doc
The following NEW packages will be installed:
  autoconf automake autotools-dev libbrotli-dev libglib2.0-0 libglib2.0-data
  libicu70 libltdl-dev libltdl7 libsigsegv2 libssl-dev libtool libxml2
  libzstd-dev m4 pkg-config shared-mime-info xdg-user-dirs zlib1g-dev
0 upgraded, 19 newly installed, 0 to remove and 10 not upgraded.
Need to get 18.2 MB of archives.
After this operation, 67.4 MB of additional disk space will be used.

0% [Working]
            
Get:1 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libglib2.0-0 amd64 2.72.4-0ubuntu2.6 [1467 kB]

0% [1 libglib2.0-0 14.2 kB/1467 kB 1%]
2% [1 libglib2.0-0 418 kB/1467 kB 29%]
                                      
8% [Working]
            
Get:2 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libglib2.0-data all 2.72.4-0ubuntu2.6 [4698 B]

8% [2 libglib2.0-data 4698 B/4698 B 100%]
                                         
9% [Waiting for headers]
                        
Get:3 http://archive.ubuntu.com/ubuntu jammy/main amd64 libicu70 amd64 70.1-2 [10.6 MB]

9% [3 libicu70 15.6 kB/10.6 MB 0%]
                                  
Get:4 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libxml2 amd64 2.9.13+dfsg-1ubuntu0.9 [764 kB]

                                  
57% [4 libxml2 69.4 kB/764 kB 9%]
                                 
61% [Waiting for headers]
[command output truncated]
age automake.
Preparing to unpack .../10-automake_1%3a1.16.5-1.3_all.deb ...
Unpacking automake (1:1.16.5-1.3) ...
Selecting previously unselected package libbrotli-dev:amd64.
Preparing to unpack .../11-libbrotli-dev_1.0.9-2build6_amd64.deb ...
Unpacking libbrotli-dev:amd64 (1.0.9-2build6) ...
Selecting previously unselected package libltdl7:amd64.
Preparing to unpack .../12-libltdl7_2.4.6-15build2_amd64.deb ...
Unpacking libltdl7:amd64 (2.4.6-15build2) ...
Selecting previously unselected package libltdl-dev:amd64.
Preparing to unpack .../13-libltdl-dev_2.4.6-15build2_amd64.deb ...
Unpacking libltdl-dev:amd64 (2.4.6-15build2) ...
Selecting previously unselected package libssl-dev:amd64.
Preparing to unpack .../14-libssl-dev_3.0.2-0ubuntu1.19_amd64.deb ...
Unpacking libssl-dev:amd64 (3.0.2-0ubuntu1.19) ...
Selecting previously unselected package libtool.
Preparing to unpack .../15-libtool_2.4.6-15build2_all.deb ...
Unpacking libtool (2.4.6-15build2) ...
Selecting previously unselected package libzstd-dev:amd64.
Preparing to unpack .../16-libzstd-dev_1.4.8+dfsg-3build1_amd64.deb ...
Unpacking libzstd-dev:amd64 (1.4.8+dfsg-3build1) ...
Selecting previously unselected package pkg-config.
Preparing to unpack .../17-pkg-config_0.29.2-1ubuntu3_amd64.deb ...
Unpacking pkg-config (0.29.2-1ubuntu3) ...
Selecting previously unselected package zlib1g-dev:amd64.
Preparing to unpack .../18-zlib1g-dev_1%3a1.2.11.dfsg-2ubuntu9.2_amd64.deb ...
Unpacking zlib1g-dev:amd64 (1:1.2.11.dfsg-2ubuntu9.2) ...
Setting up libzstd-dev:amd64 (1.4.8+dfsg-3build1) ...
Setting up xdg-user-dirs (0.17-2ubuntu4) ...
Setting up libglib2.0-0:amd64 (2.72.4-0ubuntu2.6) ...
No schema files found: doing nothing.
Setting up autotools-dev (20220109.1) ...
Setting up libglib2.0-data (2.72.4-0ubuntu2.6) ...
Setting up libsigsegv2:amd64 (2.13-1ubuntu3) ...
Setting up libssl-dev:amd64 (3.0.2-0ubuntu1.19) ...
Setting up pkg-config (0.29.2-1ubuntu3) ...
Setting up libltdl7:amd64 (2.4.6-15build2) ...
Setting up zlib1g-dev:amd64 (1:1.2.11.dfsg-2ubuntu9.2) ...
Setting up libbrotli-dev:amd64 (1.0.9-2build6) ...
Setting up libicu70:amd64 (70.1-2) ...
Setting up libtool (2.4.6-15build2) ...
Setting up m4 (1.4.18-5ubuntu2) ...
Setting up autoconf (2.71-2) ...
Setting up libxml2:amd64 (2.9.13+dfsg-1ubuntu0.9) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/automake.1.gz because associated file /usr/share/man/man1/automake-1.16.1.gz (of link group automake) doesn't exist
update-alternatives: warning: skip creation of /usr/share/man/man1/aclocal.1.gz because associated file /usr/share/man/man1/aclocal-1.16.1.gz (of link group automake) doesn't exist
Setting up libltdl-dev:amd64 (2.4.6-15build2) ...
Setting up shared-mime-info (2.1-2) ...
Processing triggers for libc-bin (2.35-0ubuntu3.10) ...
↓ 75 lines
ASSISTANT
Show reasoning

Good! The dependencies are installed. Now I need to:
1. Navigate to the curl source directory
2. Configure curl with the required options (SSL, brotli, zlib, zstd)
3. Compile it
4. Install it to /home/peter/result
5. Create a symlink from /home/peter/result/curl to the actual binary

Let me start by checking the curl directory and then configuring it.

compile-bench> cd /home/peter/curl-8.16.0 && ls -la
total 2312
drwxr-xr-x 14 peter peter    4096 Sep 10 05:43 .
drwxr-x---  1 peter peter    4096 Sep 29 17:49 ..
-rw-r--r--  1 peter peter     284 Sep 10 05:43 .editorconfig
-rw-r--r--  1 peter peter     438 Sep 10 05:43 CHANGES.md
drwxr-xr-x  2 peter peter    4096 Sep 10 05:43 CMake
-rw-r--r--  1 peter peter   92961 Sep 10 05:43 CMakeLists.txt
-rw-r--r--  1 peter peter    1088 Sep 10 05:43 COPYING
-rw-r--r--  1 peter peter    1712 Sep 10 05:43 Dockerfile
-rw-r--r--  1 peter peter    6930 Sep 10 05:43 Makefile.am
-rw-r--r--  1 peter peter   39602 Sep 10 05:43 Makefile.in
-rw-r--r--  1 peter peter    1664 Sep 10 05:43 README
-rw-r--r--  1 peter peter   28109 Sep 10 05:43 RELEASE-NOTES
-rw-r--r--  1 peter peter   44196 Sep 10 05:43 acinclude.m4
-rw-r--r--  1 peter peter   45838 Sep 10 05:43 aclocal.m4
-rwxr-xr-x  1 peter peter    7400 Sep 10 05:43 compile
-rwxr-xr-x  1 peter peter   49482 Sep 10 05:43 config.guess
-rwxr-xr-x  1 peter peter   35406 Sep 10 05:43 config.sub
-rwxr-xr-x  1 peter peter 1349020 Sep 10 05:43 configure
-rw-r--r--  1 peter peter  166752 Sep 10 05:43 configure.ac
-rw-r--r--  1 peter peter    4778 Sep 10 05:43 curl-config.in
-rwxr-xr-x  1 peter peter   23568 Sep 10 05:43 depcomp
drwxr-xr-x  7 peter peter    4096 Sep 10 05:43 docs
drwxr-xr-x  3 peter peter    4096 Sep 10 05:43 include
-rwxr-xr-x  1 peter peter   15358 Sep 10 05:43 install-sh
drwxr-xr-x  7 peter peter   12288 Sep 10 05:43 lib
-rw-r--r--  1 peter peter    1586 Sep 10 05:43 libcurl.pc.in
-rwxr-xr-x  1 peter peter  333057 Sep 10 05:43 ltmain.sh
drwxr-xr-x  2 peter peter    4096 Sep 10 05:43 m4
-rwxr-xr-x  1 peter peter    6878 Sep 10 05:43 missing
drwxr-xr-x  4 peter peter    4096 Sep 10 05:43 packages
drwxr-xr-x  5 peter peter    4096 Sep 10 05:43 plan9
drwxr-xr-x  2 peter peter    4096 Sep 10 05:43 projects
drwxr-xr-x  2 peter peter    4096 Sep 10 05:43 scripts
drwxr-xr-x  2 peter peter    4096 Sep 10 05:43 src
drwxr-xr-x 10 peter peter    4096 Sep 10 05:43 tests
drwxr-xr-x  2 peter peter    4096 Sep 10 05:43 winbuild
↓ 38 lines
ASSISTANT
Show reasoning

Good! The curl source is already extracted and has a configure script. Now I need to:
1. Configure curl with SSL, brotli, zlib, and zstd support
2. Compile it
3. Install it to /home/peter/result
4. Create a symlink from /home/peter/result/curl to the actual binary

Let me configure curl with the required options:
- --prefix=/home/peter/result (installation directory)
- --with-ssl or --with-openssl (for SSL/TLS support)
- --with-brotli (for brotli support)
- --with-zlib (for zlib support)
- --with-zstd (for zstd support)

Let me run the configure command.

compile-bench> cd /home/peter/curl-8.16.0 && ./configure --prefix=/home/peter/result --with-openssl --with-brotli --with-zlib --with-zstd
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for ar... /usr/bin/ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking how to run the C preprocessor... gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for grep that handles long lines and -e... (cached) /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking if OS is AIX (to define _ALL_SOURCE)... no
checking if _THREAD_SAFE is already defin
[command output truncated]
ibrary is required... no
checking for gethostbyname... yes
checking whether build target is a native Windows one... (cached) no
checking for proto/bsdsocket.h... no
checking for connect in libraries... yes
checking for sys/types.h... (cached) yes
checking for monotonic clock_gettime... yes
checking for clock_gettime in libraries... no additional lib required
checking if monotonic clock_gettime works... yes
checking for sys/types.h... (cached) yes
checking for raw monotonic clock_gettime... yes
checking for pkg-config... /usr/bin/pkg-config
checking for zlib options with pkg-config... found
checking for zlib.h... yes
configure: found both libz and libz.h header
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libbrotlidec options with pkg-config... found
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libbrotlicommon options with pkg-config... found
checking for BrotliDecoderDecompress in -lbrotlidec... yes
checking for brotli/decode.h... yes
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libzstd options with pkg-config... found
checking for ZSTD_createDStream in -lzstd... yes
checking for zstd.h... yes
checking whether to enable IPv6... yes
checking if struct sockaddr_in6 has sin6_scope_id member... yes
checking if argv can be written to... yes
checking if GSS-API support is requested... no
checking whether to enable Windows native SSL/TLS... no
checking whether to enable Amiga native SSL/TLS (AmiSSL v5)... no
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for openssl options with pkg-config... found
configure: pkg-config: SSL_LIBS: "-lssl -lcrypto"
configure: pkg-config: SSL_LDFLAGS: ""
configure: pkg-config: SSL_CPPFLAGS: ""
checking for HMAC_Update in -lcrypto... yes
checking for SSL_connect in -lssl... yes
checking for openssl/x509.h... yes
checking for openssl/rsa.h... yes
checking for openssl/crypto.h... yes
checking for openssl/pem.h... yes
checking for openssl/ssl.h... yes
checking for openssl/err.h... yes
checking for BoringSSL... no
checking for AWS-LC... no
checking for LibreSSL... no
checking for OpenSSL >= v3... yes
checking for SSL_set_quic_use_legacy_codepoint... no
checking for SSL_set_quic_tls_cbs... no
configure: OpenSSL version does not speak any known QUIC API
checking for SRP support in OpenSSL... yes
checking for QUIC support and OpenSSL >= 3.3... no
configure: built with one SSL backend
checking default CA cert bundle/path... configure: want unset ca /etc/ssl/certs/ca-certificates.crt
/etc/ssl/certs/ca-certificates.crt
/etc/ssl/certs (capath)
checking whether to use OpenSSL's built-in CA store... no
checking CA cert bundle path to embed in the curl tool... no
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libpsl options with pkg-config... no
checking for psl_builtin in -lpsl... no
configure: error: libpsl libs and/or directories were not found where specified!
↓ 132 lines
ASSISTANT
Show reasoning

The configure script is complaining about missing libpsl. I need to either install libpsl or disable it in the configuration. Let me install the libpsl-dev package to satisfy this dependency.

compile-bench> sudo DEBIAN_FRONTEND=noninteractive apt-get install -y libpsl-dev
Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 3%

Reading package lists... 3%

Reading package lists... 4%

Reading package lists... 4%

Reading package lists... 41%

Reading package lists... 41%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 51%

Reading package lists... 51%

Reading package lists... 67%

Reading package lists... 67%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 80%

Reading package lists... 80%

Reading package lists... 96%

Reading package lists... 96%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... Done


Building dependency tree... 0%

Building dependency tree... 0%

Building dependency tree... 50%

Building dependency tree... 50%

Building dependency tree... Done


Reading state information... 0% 

Reading state information... 1%

Reading state information... 2%

Reading state information... Done

The following NEW packages will be installed:
  libpsl-dev
0 upgraded, 1 newly installed, 0 to remove and 10 not upgraded.
Need to get 77.9 kB of archives.
After this operation, 214 kB of additional disk space will be used.

0% [Working]
            
Get:1 http://archive.ubuntu.com/ubuntu jammy/main amd64 libpsl-dev amd64 0.21.0-1.2build2 [77.9 kB]

15% [1 libpsl-dev 14.2 kB/77.9 kB 18%]
                                      
100% [Working]
              
Fetched 77.9 kB in 0s (177 kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package libpsl-dev:amd64.
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 11669 files and directories currently installed.)
Preparing to unpack .../libpsl-dev_0.21.0-1.2build2_amd64.deb ...
Unpacking libpsl-dev:amd64 (0.21.0-1.2build2) ...
Setting up libpsl-dev:amd64 (0.21.0-1.2build2) ...
↓ 17 lines
ASSISTANT
Show reasoning

Now I need to run the configure command again.

compile-bench> cd /home/peter/curl-8.16.0 && ./configure --prefix=/home/peter/result --with-openssl --with-brotli --with-zlib --with-zstd
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for ar... /usr/bin/ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking how to run the C preprocessor... gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for grep that handles long lines and -e... (cached) /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking if OS is AIX (to define _ALL_SOURCE)... no
checking if _THREAD_SAFE is already defin
[command output truncated]
Makefile
config.status: creating tests/server/Makefile
config.status: creating tests/libtest/Makefile
config.status: creating tests/unit/Makefile
config.status: creating tests/tunit/Makefile
config.status: creating tests/http/config.ini
config.status: creating tests/http/Makefile
config.status: creating packages/Makefile
config.status: creating packages/vms/Makefile
config.status: creating libcurl.pc
config.status: creating curl-config
config.status: creating lib/curl_config.h
config.status: executing depfiles commands
config.status: executing libtool commands
configure: Configured to build curl/libcurl:

  Host setup:       x86_64-pc-linux-gnu
  Install prefix:   /home/peter/result
  Compiler:         gcc
   CFLAGS:          -Werror-implicit-function-declaration -O2 -Wno-system-headers
   CFLAGS extras:   
   CPPFLAGS:        -D_GNU_SOURCE
   LDFLAGS:         
     curl-config:   
   LIBS:            -lpsl -lssl -lcrypto -lssl -lcrypto -lzstd -lzstd -lbrotlidec -lbrotlidec -lbrotlicommon -lz

  curl version:     8.16.0
  SSL:              enabled (OpenSSL v3+)
  SSH:              no      (--with-{libssh,libssh2})
  zlib:             enabled
  brotli:           enabled (libbrotlidec)
  zstd:             enabled (libzstd)
  GSS-API:          no      (--with-gssapi)
  GSASL:            no      (libgsasl not found)
  TLS-SRP:          enabled
  resolver:         POSIX threaded
  IPv6:             enabled
  Unix sockets:     enabled
  IDN:              no      (--with-{libidn2,winidn})
  Build docs:       enabled (--disable-docs)
  Build libcurl:    Shared=yes, Static=yes
  Built-in manual:  enabled
  --libcurl option: enabled (--disable-libcurl-option)
  Verbose errors:   enabled (--disable-verbose)
  Code coverage:    disabled
  SSPI:             no      (--enable-sspi)
  ca cert bundle:   /etc/ssl/certs/ca-certificates.crt
  ca cert path:     /etc/ssl/certs
  ca cert embed:    no
  ca fallback:      no
  LDAP:             no      (--enable-ldap / --with-ldap-lib / --with-lber-lib)
  LDAPS:            no      (--enable-ldaps)
  IPFS/IPNS:        enabled
  RTSP:             enabled
  RTMP:             no      (--with-librtmp)
  PSL:              enabled
  Alt-svc:          enabled (--disable-alt-svc)
  Headers API:      enabled (--disable-headers-api)
  HSTS:             enabled (--disable-hsts)
  HTTP1:            enabled (internal)
  HTTP2:            no      (--with-nghttp2)
  HTTP3:            no      (--with-ngtcp2 --with-nghttp3, --with-quiche, --with-openssl-quic)
  ECH:              no      (--enable-ech)
  HTTPS RR:         no      (--enable-httpsrr)
  SSLS-EXPORT:      no      (--enable-ssls-export)
  Protocols:        dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
  Features:         alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd
↓ 136 lines
ASSISTANT
Show reasoning

Great! The configure command completed successfully. I can see that it's configured with:
- SSL: enabled (OpenSSL v3+) with TLS-SRP enabled
- zlib: enabled
- brotli: enabled (libbrotlidec)
- zstd: enabled (libzstd)

Now I need to:
1. Compile curl with make
2. Install it to /home/peter/result
3. Create a symlink from /home/peter/result/curl to the actual binary

Let me proceed with the compilation.

compile-bench> cd /home/peter/curl-8.16.0 && make -j$(nproc)
Making all in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make  all-am
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
  CC       libcurl_la-altsvc.lo
  CC       libcurl_la-amigaos.lo
  CC       libcurl_la-asyn-ares.lo
  CC       libcurl_la-asyn-base.lo
  CC       libcurl_la-asyn-thrdd.lo
  CC       libcurl_la-bufq.lo
  CC       libcurl_la-bufref.lo
  CC       libcurl_la-cf-h1-proxy.lo
  CC       libcurl_la-cf-h2-proxy.lo
  CC       libcurl_la-cf-haproxy.lo
  CC       libcurl_la-cf-https-connect.lo
  CC       libcurl_la-cf-ip-happy.lo
  CC       libcurl_la-cf-socket.lo
  CC       libcurl_la-cfilters.lo
  CC       libcurl_la-conncache.lo
  CC       libcurl_la-connect.lo
  CC       libcurl_la-content_encoding.lo
  CC       libcurl_la-cookie.lo
  CC       libcurl_la-cshutdn.lo
  CC       libcurl_la-curl_addrinfo.lo
  CC       libcurl_la-curl_des.lo
  CC       libcurl_la-curl_endian.lo
  CC       libcurl_la-curl_fnmatch.lo
  CC       libcurl_la-curl_get_line.lo
  CC       libcurl_la-curl_gethostname.lo
  CC       libcurl_la-curl_gssapi.lo
  CC       libcurl_la-curl_memrchr.lo
  CC       libcurl_la-curl_ntlm_core.lo
  CC       libcurl_la-curl_range.lo
  CC       libcurl_la-curl_rtmp.lo
  CC       libcurl_la-curl_sasl.lo
  CC       libcurl_la-curl_sha512_256.lo
  CC       libcurl_la-curl_sspi.lo
  CC       libcurl_la-curl_threads.lo
  CC       libcurl_la-curl_trc.lo
  CC       libcurl_la-cw-out.lo
  CC       libcurl_la-cw-pause.lo
  CC       libcurl_la-dict.lo
  CC       libcurl_la-doh.lo
  CC       libcurl_la-dynhds.lo
  CC       libcurl_la-easy.lo
  CC       libcurl_la-easygetopt.lo
  CC       libcurl_la-easyoptions.lo
  CC       libcurl_la-escape.lo
  CC       libcurl_la-fake_addrinfo.lo
  CC       libcurl_la-file.lo
  CC       libcurl_la-fileinfo.lo
  CC       libcurl_la-fopen.lo
  CC       libcurl_la-formdata.lo
  CC       libcurl_la-ftp.lo
  CC       libcurl_la-ftplistparser.lo
  CC       libcurl_la-getenv.lo
  CC       libcurl_la-getinfo.lo
  CC       libcurl_la-gopher.lo
  CC       libcurl_la-hash.lo
  CC       libcurl_la-headers.lo
  CC       libcurl_la-hmac.lo
  CC       libcurl_la-hostip.lo
  CC       libcurl_la-hostip4.lo
  CC       libcurl_la-hostip6.lo
  CC       libcurl_la-hsts.lo
  CC       libcurl_la-http.lo
  CC       libcurl_la-http1.lo
  CC       libcurl_la-http2.lo
  CC       libcurl_la-http_aws_sigv4.lo
  CC       libcurl_la-http_chunks.lo
[command output truncated]
  CC       ../lib/curlx/curl-wait.o
  CC       ../lib/curlx/curl-warnless.o
  CC       curlinfo.o
  CC       libcurltool_la-config2setopts.lo
  CC       libcurltool_la-slist_wc.lo
  CC       libcurltool_la-terminal.lo
  CC       libcurltool_la-tool_bname.lo
  CC       libcurltool_la-tool_cb_dbg.lo
  CC       libcurltool_la-tool_cb_hdr.lo
  CC       libcurltool_la-tool_cb_prg.lo
  CC       libcurltool_la-tool_cb_rea.lo
  CC       libcurltool_la-tool_cb_see.lo
  CC       libcurltool_la-tool_cb_soc.lo
  CC       libcurltool_la-tool_cb_wrt.lo
  CC       libcurltool_la-tool_cfgable.lo
  CC       libcurltool_la-tool_dirhie.lo
  CC       libcurltool_la-tool_doswin.lo
  CC       libcurltool_la-tool_easysrc.lo
  CC       libcurltool_la-tool_filetime.lo
  CC       libcurltool_la-tool_findfile.lo
  CC       libcurltool_la-tool_formparse.lo
  CC       libcurltool_la-tool_getparam.lo
  CC       libcurltool_la-tool_getpass.lo
  CC       libcurltool_la-tool_help.lo
  CC       libcurltool_la-tool_helpers.lo
  CC       libcurltool_la-tool_ipfs.lo
  CC       libcurltool_la-tool_libinfo.lo
  CC       libcurltool_la-tool_listhelp.lo
  CC       libcurltool_la-tool_main.lo
  CC       libcurltool_la-tool_msgs.lo
  CC       libcurltool_la-tool_operate.lo
  CC       libcurltool_la-tool_operhlp.lo
  CC       libcurltool_la-tool_paramhlp.lo
  CC       libcurltool_la-tool_parsecfg.lo
  CC       libcurltool_la-tool_progress.lo
  CC       libcurltool_la-tool_setopt.lo
  CC       libcurltool_la-tool_ssls.lo
  CC       libcurltool_la-tool_stderr.lo
  CC       libcurltool_la-tool_strdup.lo
  CC       libcurltool_la-tool_urlglob.lo
  CC       libcurltool_la-tool_util.lo
  CC       libcurltool_la-tool_vms.lo
  CC       libcurltool_la-tool_writeout.lo
  CC       libcurltool_la-tool_writeout_json.lo
  CC       libcurltool_la-tool_xattr.lo
  CC       libcurltool_la-var.lo
  CC       ../lib/curlx/libcurltool_la-base64.lo
  CC       ../lib/curlx/libcurltool_la-multibyte.lo
  CC       ../lib/curlx/libcurltool_la-dynbuf.lo
  CC       ../lib/curlx/libcurltool_la-nonblock.lo
  CC       ../lib/curlx/libcurltool_la-strparse.lo
  CC       ../lib/curlx/libcurltool_la-timediff.lo
  CC       ../lib/curlx/libcurltool_la-timeval.lo
  CC       ../lib/curlx/libcurltool_la-version_win32.lo
  CC       ../lib/curlx/libcurltool_la-wait.lo
  CC       ../lib/curlx/libcurltool_la-warnless.lo
  CC       curl-tool_hugehelp.o
  CC       curl-tool_ca_embed.o
  CCLD     curlinfo
  CCLD     libcurltool.la
  CCLD     curl
make[1]: Leaving directory '/home/peter/curl-8.16.0/src'
Making all in scripts
make[1]: Entering directory '/home/peter/curl-8.16.0/scripts'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/home/peter/curl-8.16.0/scripts'
make[1]: Entering directory '/home/peter/curl-8.16.0'
make[1]: Nothing to be done for 'all-am'.
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 141 lines
ASSISTANT
Show reasoning

Good! The build was successful. Now I need to install curl to /home/peter/result and create a symlink from /home/peter/result/curl to the actual binary.

compile-bench> cd /home/peter/curl-8.16.0 && make install
Making install in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
 /usr/bin/mkdir -p '/home/peter/result/lib'
 /bin/bash ../libtool   --mode=install /usr/bin/install -c   libcurl.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libcurl.so.4.8.0 /home/peter/result/lib/libcurl.so.4.8.0
libtool: install: (cd /home/peter/result/lib && { ln -s -f libcurl.so.4.8.0 libcurl.so.4 || { rm -f libcurl.so.4 && ln -s libcurl.so.4.8.0 libcurl.so.4; }; })
libtool: install: (cd /home/peter/result/lib && { ln -s -f libcurl.so.4.8.0 libcurl.so || { rm -f libcurl.so && ln -s libcurl.so.4.8.0 libcurl.so; }; })
libtool: install: /usr/bin/install -c .libs/libcurl.lai /home/peter/result/lib/libcurl.la
libtool: install: /usr/bin/install -c .libs/libcurl.a /home/peter/result/lib/libcurl.a
libtool: install: chmod 644 /home/peter/result/lib/libcurl.a
libtool: install: ranlib /home/peter/result/lib/libcurl.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /home/peter/result/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/peter/curl-8.16.0/lib'
make[1]: Leaving directory '/home/peter/curl-8.16.0/lib'
Making install in docs
make[1]: Entering directory '/home/peter/curl-8.16.0/docs'
Making install in .
make[2]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /usr/bin/install -c -m 644 curl-config.1 wcurl.1 '/home/peter/result/share/man/man1'
make[3]: Leaving directory '/home/peter/curl-8.16.0/docs'
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs'
Making install in cmdline-opts
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /u
[command output truncated]
ng directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/aclocal'
 /usr/bin/install -c -m 644 libcurl.m4 '/home/peter/result/share/aclocal'
 /usr/bin/mkdir -p '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_easy_cleanup.3 curl_easy_duphandle.3 curl_easy_escape.3 curl_easy_getinfo.3 curl_easy_header.3 curl_easy_init.3 curl_easy_nextheader.3 curl_easy_option_by_id.3 curl_easy_option_by_name.3 curl_easy_option_next.3 curl_easy_pause.3 curl_easy_perform.3 curl_easy_recv.3 curl_easy_reset.3 curl_easy_send.3 curl_easy_setopt.3 curl_easy_ssls_export.3 curl_easy_ssls_import.3 curl_easy_strerror.3 curl_easy_unescape.3 curl_easy_upkeep.3 curl_escape.3 curl_formadd.3 curl_formfree.3 curl_formget.3 curl_free.3 curl_getdate.3 curl_getenv.3 curl_global_cleanup.3 curl_global_init.3 curl_global_init_mem.3 curl_global_sslset.3 curl_global_trace.3 curl_mime_addpart.3 curl_mime_data.3 curl_mime_data_cb.3 curl_mime_encoder.3 curl_mime_filedata.3 curl_mime_filename.3 curl_mime_free.3 '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_mime_headers.3 curl_mime_init.3 curl_mime_name.3 curl_mime_subparts.3 curl_mime_type.3 curl_mprintf.3 curl_multi_add_handle.3 curl_multi_assign.3 curl_multi_cleanup.3 curl_multi_fdset.3 curl_multi_get_handles.3 curl_multi_get_offt.3 curl_multi_info_read.3 curl_multi_init.3 curl_multi_perform.3 curl_multi_poll.3 curl_multi_remove_handle.3 curl_multi_setopt.3 curl_multi_socket.3 curl_multi_socket_action.3 curl_multi_socket_all.3 curl_multi_strerror.3 curl_multi_timeout.3 curl_multi_wait.3 curl_multi_waitfds.3 curl_multi_wakeup.3 curl_pushheader_byname.3 curl_pushheader_bynum.3 curl_share_cleanup.3 curl_share_init.3 curl_share_setopt.3 curl_share_strerror.3 curl_slist_append.3 curl_slist_free_all.3 curl_strequal.3 curl_strnequal.3 curl_unescape.3 curl_url.3 curl_url_cleanup.3 curl_url_dup.3 '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_url_get.3 curl_url_set.3 curl_url_strerror.3 curl_version.3 curl_version_info.3 curl_ws_meta.3 curl_ws_recv.3 curl_ws_send.3 curl_ws_start_frame.3 libcurl-easy.3 libcurl-env-dbg.3 libcurl-env.3 libcurl-errors.3 libcurl-multi.3 libcurl-security.3 libcurl-share.3 libcurl-symbols.3 libcurl-thread.3 libcurl-tutorial.3 libcurl-url.3 libcurl-ws.3 libcurl.3 '/home/peter/result/share/man/man3'
make[6]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[4]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[3]: Leaving directory '/home/peter/curl-8.16.0'
make[2]: Leaving directory '/home/peter/curl-8.16.0'
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 69 lines
ASSISTANT
Show reasoning

The installation completed successfully. Now I need to:
1. Create a symlink from /home/peter/result/curl to the actual binary
2. Verify that the binary was installed correctly and has the required features (SSL/TLS v1.3, brotli, zlib, zstd)

Let me first check where the actual binary is located and then create the symlink.

compile-bench> ls -la /home/peter/result/
total 24
drwxr-xr-x 6 peter peter 4096 Sep 29 17:50 .
drwxr-x--- 1 peter peter 4096 Sep 29 17:50 ..
drwxr-xr-x 2 peter peter 4096 Sep 29 17:50 bin
drwxr-xr-x 3 peter peter 4096 Sep 29 17:50 include
drwxr-xr-x 3 peter peter 4096 Sep 29 17:50 lib
drwxr-xr-x 4 peter peter 4096 Sep 29 17:50 share
↓ 8 lines
ASSISTANT
Show reasoning

Good, the installation completed. Now I need to:
1. Check where the actual curl binary is located
2. Create a symlink from /home/peter/result/curl to the actual binary

Let me find the curl binary first.

compile-bench> ls -la /home/peter/result/bin/
total 368
drwxr-xr-x 2 peter peter   4096 Sep 29 17:50 .
drwxr-xr-x 6 peter peter   4096 Sep 29 17:50 ..
-rwxr-xr-x 1 peter peter 346464 Sep 29 17:50 curl
-rwxr-xr-x 1 peter peter   5109 Sep 29 17:50 curl-config
-rwxr-xr-x 1 peter peter  10622 Sep 29 17:50 wcurl
↓ 7 lines
ASSISTANT
Show reasoning

Now I need to create a symlink from /home/peter/result/curl to the actual binary which is at /home/peter/result/bin/curl. The user wants a symlink at /home/peter/result/curl that points to the actual curl binary.

compile-bench> ln -s /home/peter/result/bin/curl /home/peter/result/curl
[empty output]
ASSISTANT
Show reasoning

The user asked me to:
1. Compile curl from source
2. Install it to /home/peter/result
3. Create a symlink from /home/peter/result/curl to the actual binary
4. Make sure it builds with SSL support (TLS v1.3), brotli, zlib and zstd

I've done all of this:
- Extracted the source
- Installed dependencies (libssl-dev, libbrotli-dev, zlib1g-dev, libzstd-dev, libpsl-dev)
- Configured with --with-openssl --with-brotli --with-zlib --with-zstd
- Compiled with make
- Installed to /home/peter/result
- Created a symlink from /home/peter/result/curl to /home/peter/result/bin/curl

Now I should verify that:
1. The symlink was created correctly
2. curl works and has the required features (SSL/TLS v1.3, brotli, zlib, zstd)

compile-bench> ls -la /home/peter/result/curl
lrwxrwxrwx 1 peter peter 27 Sep 29 17:50 /home/peter/result/curl -> /home/peter/result/bin/curl
ASSISTANT
Show reasoning

Good! The symlink is created. Now let me verify that curl was built with all the required features:
1. SSL support (TLS v1.3)
2. brotli
3. zlib
4. zstd

I should run curl with --version to check the features.

compile-bench> /home/peter/result/bin/curl --version
curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.2 zlib/1.2.11 brotli/1.0.9 zstd/1.4.8 libpsl/0.21.0
Release-Date: 2025-09-10
Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd
↓ 5 lines
ASSISTANT
Show reasoning

Great! The curl binary has been compiled and installed successfully. Let me verify that it has all the required features:

1. SSL support (TLS v1.3) - Yes, it shows "OpenSSL/3.0.2" and "SSL" in features
2. brotli - Yes, shows "brotli/1.0.9" and "brotli" in features
3. zlib - Yes, shows "zlib/1.2.11" and "libz" in features
4. zstd - Yes, shows "zstd/1.4.8" and "zstd" in features

Now let me verify the TLS 1.3 support specifically and test if the binary works:

compile-bench> /home/peter/result/bin/curl -V
curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.2 zlib/1.2.11 brotli/1.0.9 zstd/1.4.8 libpsl/0.21.0
Release-Date: 2025-09-10
Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd
↓ 5 lines
ASSISTANT
Show reasoning

Great! The curl binary is compiled and installed. Let me verify that it has TLS v1.3 support by testing with a TLS connection. I should check if the OpenSSL version supports TLS 1.3.

The version shows:
- curl 8.16.0
- OpenSSL/3.0.2
- zlib/1.2.11
- brotli/1.0.9
- zstd/1.4.8

OpenSSL 3.0.2 definitely supports TLS 1.3. Let me verify by testing a HTTPS connection to see if TLS 1.3 works.

compile-bench> /home/peter/result/bin/curl -I --tlsv1.3 --tls-max 1.3 https://www.cloudflare.com 2>&1 | head -20
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
HTTP/1.1 200 OK

Date: Mon, 29 Sep 2025 17:51:06 GMT

Content-Type: text/html; charset=utf-8

Connection: keep-alive

CF-RAY: 986d53a1be0bf4d4-CMH

Set-Cookie: _cfms_willow=enable; Max-Age=1209600; path=/; domain=.www.cloudflare.com; SameSite=Strict; Secure

Set-Cookie: _ga=GA1.1.b1ef1843-8a5a-4818-8bd3-ecbff014089d; Domain=.cloudflare.com; Expires=Thu, 29 Oct 2026 17:51:06 GMT; Path=/

Set-Cookie: cfz_google-analytics_v4={"nzcr_ga4":{"v":"b1ef1843-8a5a-4818-8bd3-ecbff014089d","e":1793296266557}}; Domain=.cloudflare.com; Expires=Thu Oct 29 2026 17:51:06 GMT+0000 (Coordinated Universal Time); HttpOnly; SameSite=Lax; Path=/; Secure

Set-Cookie: cfz_adobe={"MsVJ_ecid":{"v":"CiY1NTgxODIzNjM0MDYxNDE0NzY3NDM0MTI3NTgwODg5NDE3MDIyNFIOCNCE5rSZMyoDVkE2MALwAdCE5rSZMw==","e":1793296266603}}; Domain=.cloudflare.com; Expires=Thu Oct 29 2026 17:51:06 GMT+0000 (Coordinated Universal Time); HttpOnly; SameSite=Lax; Path=/; Secure

Set-Cookie: kndctr_8AD56F28618A50850A495FB6_AdobeOrg_identity=CiY1NTgxODIzNjM0MDYxNDE0NzY3NDM0MTI3NTgwODg5NDE3MDIyNFIOCNCE5rSZMyoDVkE2MALwAdCE5rSZMw==; Domain=.cloudflare.com; Expires=Thu, 29 Oct 2026 17:51:06 GMT; Path=/; Secure; SameSite=Lax

Set-Cookie: __cf_bm=IxfNiMiTAWvXrJXHDvNmOAs1JzNqXFbxdYHyhkHtGAQ-1759168266-1.0.1.1-rDEpgK3fm1vp4gNjomMZw8cGYnuLzfKDaNido187Eefi7.bTTlUsfSj6CmBOwwTUbWYMe3ZtIEAOA07M17.UQV4mfEer2CcUzuxy3yYKzWp4T29JVHDxFDH781YzZIYn; path=/; expires=Mon, 29-Sep-25 18:21:06 GMT; domain=.www.cloudflare.com; HttpOnly; Secure; SameSite=None

Strict-Transport-Security: max-age=31536000; includeSubDomains

Permissions-Policy: geolocation=(), camera=(), microphone=()

Referrer-Policy: strict-origin-when-cross-origin

X-Content-Type-Options: nosniff

X-Frame-Options: SAMEORIGIN

x-RM: GW
↓ 21 lines
ASSISTANT
Show reasoning

Great! The TLS v1.3 test worked. Let me now verify the build features more specifically to ensure all the required features are present:
- SSL support with TLS v1.3 ✓ (OpenSSL/3.0.2 is shown, and TLS 1.3 connection worked)
- brotli ✓ (shown in version output)
- zlib ✓ (shown in version output)
- zstd ✓ (shown in version output)

Let me do a final comprehensive check to ensure everything is correctly set up.

compile-bench> echo "=== Verifying symlink ===" && ls -la /home/peter/result/curl && echo "" && echo "=== Checking curl version and features ===" && /home/peter/result/curl --version
=== Verifying symlink ===
lrwxrwxrwx 1 peter peter 27 Sep 29 17:50 /home/peter/result/curl -> /home/peter/result/bin/curl

=== Checking curl version and features ===
curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.2 zlib/1.2.11 brotli/1.0.9 zstd/1.4.8 libpsl/0.21.0
Release-Date: 2025-09-10
Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd
↓ 9 lines
ASSISTANT
Show reasoning

The user asked me to:
1. Compile curl v8.16.0 from /home/peter/curl.tar.gz
2. Install it to /home/peter/result
3. Create a symlink from /home/peter/result/curl to the actual binary
4. Make sure it builds with SSL support (TLS v1.3), brotli, zlib and zstd

Let me verify what I've done:
1. ✓ Extracted curl.tar.gz
2. ✓ Installed dependencies (build-essential, libssl-dev, libbrotli-dev, zlib1g-dev, libzstd-dev, etc.)
3. ✓ Configured with --prefix=/home/peter/result --with-openssl --with-brotli --with-zlib --with-zstd
4. ✓ Compiled with make
5. ✓ Installed with make install
6. ✓ Created symlink from /home/peter/result/curl to /home/peter/result/bin/curl

Now let me verify that all requirements are met:
- SSL support (TLS v1.3): The output shows "OpenSSL/3.0.2" which supports TLS 1.3, and I tested it with --tlsv1.3 successfully
- brotli: Shows "brotli/1.0.9" in the version output
- zlib: Shows "zlib/1.2.11" in the version output
- zstd: Shows "zstd/1.4.8" in the version output
- Symlink: Created at /home/peter/result/curl -> /home/peter/result/bin/curl

Everything looks good! Let me do a final comprehensive verification to confirm all requirements are met.

Perfect! Let me do a final comprehensive verification to confirm all requirements are met:

compile-bench> echo "=== Final Verification ===" && echo "" && echo "1. Installation directory structure:" && tree -L 2 /home/peter/result/ 2>/dev/null || find /home/peter/result/ -maxdepth 2 -type f -o -type l | head -20 && echo "" && echo "2. Symlink verification:" && readlink -f /home/peter/result/curl && echo "" && echo "3. Binary verification:" && file /home/peter/result/bin/curl && echo "" && echo "4. Features verification:" && /home/peter/result/curl --version | grep -E "(curl|OpenSSL|brotli|zlib|zstd)" && echo "" && echo "5. SSL/TLS support verification:" && /home/peter/result/curl --version | grep -i ssl && echo "" && echo "6. Detailed features:" && /home/peter/result/curl --version | grep Features
=== Final Verification ===

1. Installation directory structure:
/home/peter/result/
|-- bin
|   |-- curl
|   |-- curl-config
|   `-- wcurl
|-- curl -> /home/peter/result/bin/curl
|-- include
|   `-- curl
|-- lib
|   |-- libcurl.a
|   |-- libcurl.la
|   |-- libcurl.so -> libcurl.so.4.8.0
|   |-- libcurl.so.4 -> libcurl.so.4.8.0
|   |-- libcurl.so.4.8.0
|   `-- pkgconfig
`-- share
    |-- aclocal
    `-- man

8 directories, 9 files

2. Symlink verification:
/home/peter/result/bin/curl

3. Binary verification:
/home/peter/result/bin/curl: ELF 64-bit LSB pie executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=f112f83e3cc2c2f3dc241b0b5623b8c8414c5a7c, for GNU/Linux 3.2.0, not stripped

4. Features verification:
curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.2 zlib/1.2.11 brotli/1.0.9 zstd/1.4.8 libpsl/0.21.0
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd

5. SSL/TLS support verification:
curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.2 zlib/1.2.11 brotli/1.0.9 zstd/1.4.8 libpsl/0.21.0
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd

6. Detailed features:
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd
↓ 41 lines
ASSISTANT
Show reasoning

The user wants me to verify that the compilation is complete. Let me check the verification output:

1. ✅ Installation directory structure - looks good, all directories are there
2. ✅ Symlink verification - the symlink at /home/peter/result/curl points to /home/peter/result/bin/curl
3. ✅ Binary verification - curl is a valid ELF 64-bit executable
4. ✅ Features verification shows:
- curl 8.16.0 ✅
- OpenSSL/3.0.2 ✅ (SSL support with TLS v1.3 capable)
- zlib/1.2.11 ✅
- brotli/1.0.9 ✅
- zstd/1.4.8 ✅
5. ✅ SSL support confirmed
6. ✅ Features list shows: brotli, libz (zlib), SSL, zstd

All requirements have been met:
- ✅ Compiled curl v8.16.0 from source
- ✅ Installed to /home/peter/result
- ✅ Created symlink from /home/peter/result/curl to the actual binary
- ✅ Built with SSL support (OpenSSL 3.0.2 which supports TLS v1.3)
- ✅ Built with brotli support
- ✅ Built with zlib support
- ✅ Built with zstd support

The task is complete. Let me provide a summary.

Perfect! Let me verify TLS 1.3 support specifically:

compile-bench> echo "=== Testing TLS 1.3 connectivity ===" && /home/peter/result/curl -v --tlsv1.3 --tls-max 1.3 https://www.google.com 2>&1 | grep -E "(TLS|SSL|OpenSSL)" | head -10
=== Testing TLS 1.3 connectivity ===
* TLSv1.3 (OUT), TLS handshake, Client hello (1):
* TLSv1.3 (IN), TLS handshake, Server hello (2):
* TLSv1.3 (IN), TLS handshake, Encrypted Extensions (8):
* TLSv1.3 (IN), TLS handshake, Certificate (11):
* TLSv1.3 (IN), TLS handshake, CERT verify (15):
* TLSv1.3 (IN), TLS handshake, Finished (20):
* TLSv1.3 (OUT), TLS change cipher, Change cipher spec (1):
* TLSv1.3 (OUT), TLS handshake, Finished (20):
* SSL connection using TLSv1.3 / TLS_AES_256_GCM_SHA384 / X25519 / id-ecPublicKey
*  SSL certificate verify ok.
↓ 12 lines
ASSISTANT
Show reasoning

The user asked me to compile curl v8.16.0 and install it to /home/peter/result with a symlink from /home/peter/result/curl to the actual binary, ensuring it has SSL support (TLS v1.3), brotli, zlib, and zstd. Let me verify everything is complete:

1. ✅ Extracted curl.tar.gz - Done
2. ✅ Installed dependencies (build-essential, libssl-dev, libbrotli-dev, zlib1g-dev, libzstd-dev, autoconf, libtool, pkg-config, libpsl-dev) - Done
3. ✅ Configured with --prefix=/home/peter/result --with-openssl --with-brotli --with-zlib --with-zstd - Done
4. ✅ Compiled with make - Done
5. ✅ Installed to /home/peter/result - Done
6. ✅ Created symlink from /home/peter/result/curl to /home/peter/result/bin/curl - Done
7. ✅ Verified features:
- OpenSSL/3.0.2 (SSL support) ✅
- TLS v1.3 working ✅
- brotli/1.0.9 ✅
- zlib/1.2.11 ✅
- zstd/1.4.8 ✅

All requirements have been met. Let me provide a final summary.

Excellent! Let me provide a final summary to confirm everything is complete:

compile-bench> echo "=== FINAL SUMMARY ===" && echo "" && echo "✓ curl v8.16.0 successfully compiled and installed to: /home/peter/result" && echo "" && echo "✓ Symlink created:" && ls -lh /home/peter/result/curl && echo "" && echo "✓ Required features confirmed:" && echo " - SSL Support: OpenSSL/3.0.2" && echo " - TLS 1.3: Working (verified with live connection)" && echo " - brotli: 1.0.9" && echo " - zlib: 1.2.11" && echo " - zstd: 1.4.8" && echo "" && echo "✓ Full feature list:" && /home/peter/result/curl --version | tail -1
=== FINAL SUMMARY ===

✓ curl v8.16.0 successfully compiled and installed to: /home/peter/result

✓ Symlink created:
lrwxrwxrwx 1 peter peter 27 Sep 29 17:50 /home/peter/result/curl -> /home/peter/result/bin/curl

✓ Required features confirmed:
  - SSL Support: OpenSSL/3.0.2
  - TLS 1.3: Working (verified with live connection)
  - brotli: 1.0.9
  - zlib: 1.2.11
  - zstd: 1.4.8

✓ Full feature list:
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd
↓ 17 lines
ASSISTANT
Show reasoning

The user hasn't said anything new, just "..." which means they are waiting for me to continue or acknowledge that the task is complete. Let me review what was requested and what I've accomplished:

Request:
1. Compile curl v8.16.0 from source at /home/peter/curl.tar.gz
2. Install it to /home/peter/result
3. Create a symlink from /home/peter/result/curl to the actual binary
4. Ensure it builds with:
- SSL support (TLS v1.3)
- brotli
- zlib
- zstd

What I did:
1. ✓ Extracted curl.tar.gz
2. ✓ Installed necessary dependencies (build-essential, libssl-dev, libbrotli-dev, zlib1g-dev, libzstd-dev, autoconf, libtool, pkg-config, libpsl-dev)
3. ✓ Configured curl with --prefix=/home/peter/result --with-openssl --with-brotli --with-zlib --with-zstd
4. ✓ Compiled with make -j$(nproc)
5. ✓ Installed with make install
6. ✓ Created symlink: ln -s /home/peter/result/bin/curl /home/peter/result/curl
7. ✓ Verified all features are present:
- OpenSSL/3.0.2 (with SSL/TLS 1.3 support - verified with live connection)
- brotli/1.0.9
- zlib/1.2.11
- zstd/1.4.8

Everything is complete and verified. The task has been successfully accomplished.

Perfect! The task has been completed successfully. Here's what was accomplished:

✅ Task Complete

curl v8.16.0 has been successfully compiled from source and installed with all required features:

Installation Details:
- Source: /home/peter/curl.tar.gz (extracted to curl-8.16.0/)
- Installation path: /home/peter/result
- Binary location: /home/peter/result/bin/curl
- Symlink: /home/peter/result/curl → /home/peter/result/bin/curl

Required Features Verified:
✅ SSL/TLS 1.3: OpenSSL 3.0.2 (tested and working with live HTTPS connection)
✅ brotli: version 1.0.9
✅ zlib: version 1.2.11
✅ zstd: version 1.4.8

Additional Features Included:
- alt-svc, AsynchDNS, HSTS, HTTPS-proxy, IPv6, Largefile, NTLM, PSL, threadsafe, TLS-SRP, UnixSockets

The curl binary is fully functional and ready to use at /home/peter/result/curl or /home/peter/result/bin/curl.

Task finished successfully, all checks passed!
Checks passed:
curl binary exists
curl version matches expected
curl downloaded the expected local file content
curl HTTPS request to google.com returned content-type: text/html
curl TLSv1.2 connection to google.com used TLSv1.2
curl TLSv1.3 connection to google.com used TLSv1.3
curl brotli compression test passed
curl gzip compression test passed
curl version shows zstd support