<- Ranking
Summary
Task
curl-ssl
Model
claude-haiku-4.5-thinking-16k logo
claude-haiku-4.5-thinking-16k
Status
Success
Performance
Cost$0.061
Total elapsed time2m35s
LLM inference time47s
Command execution time1m48s
Commands executed16
All details >
Attempt ID 3105alhm2bhv2 Attempt group run-15-10-25-19-58
Revision 81634e2120a2 AWS Instance m8i.2xlarge
Start time 2025-10-15T18:18:12.671Z End time 2025-10-15T18:20:49.947Z
Task curl-ssl Environment ubuntu-22.04-amd64
Model claude-haiku-4.5-thinking-16k logo claude-haiku-4.5-thinking-16k OpenRouter slug anthropic/claude-haiku-4.5
Temperature 1 Explicit prompt caching true
User msg after tool call true Max tool calls 70
Total timeout seconds 900 Single command timeout 600
Cost $0.061 Duration 2m35s
LLM inference time 47s Command execution time 1m48s
Final context tokens 16,333 Total output tokens 3,899
Output reasoning tokens 1,661 Messages 35
Assistant messages 17 User messages 1
System messages 1 Commands executed 16
Download full attempt result JSON
Task
Task: curl-ssl

curl 8.16.0 is a command-line HTTP client.
Project link: curl.se

Task:
Compile and install curl to a specific location. Build with SSL support (TLS v1.3), brotli, zlib and zstd.

Difficulties:
Installing dependencies can be tricky.

Environment:
Ubuntu 22.04 on amd64, with internet access.

View task page
Execution log
SYSTEM

You are a package-building specialist operating a Ubuntu 22.04 bash shell via one tool: run_terminal_cmd.
The current working directory of every run_terminal_cmd is /home/peter.
Execution rules:
- Always pass non-interactive flags for any command that could prompt (e.g., -y, --yes, DEBIAN_FRONTEND=noninteractive).
- Don't include any newlines in the command.
- You can use sudo.
If you encounter any errors or issues while doing the user's request, you must fix them and continue the task.
At the end verify you did the user request correctly.

USER

You are given a curl v8.16.0 source code at /home/peter/curl.tar.gz. Please compile curl and install it to /home/peter/result. Create a symlink from /home/peter/result/curl to the actual binary. Make sure it builds with SSL support (TLS v1.3), brotli, zlib and zstd.

ASSISTANT
Show reasoning

Let me break down what the user is asking:
1. Extract the curl v8.16.0 source code from /home/peter/curl.tar.gz
2. Compile curl with:
- SSL support (TLS v1.3)
- brotli support
- zlib support
- zstd support
3. Install it to /home/peter/result
4. Create a symlink from /home/peter/result/curl to the actual binary

Let me start by:
1. Extracting the tar.gz file
2. Installing necessary dependencies (openssl, brotli, zlib, zstd development packages)
3. Configuring curl with the required options
4. Compiling and installing
5. Creating the symlink

Let me execute these steps.

I'll help you compile and install curl v8.16.0 with all the required features. Let me start by extracting the source, installing dependencies, and then configuring and compiling curl.

compile-bench> cd /home/peter && tar -tzf curl.tar.gz | head -20
curl-8.16.0/
curl-8.16.0/.editorconfig
curl-8.16.0/CHANGES.md
curl-8.16.0/CMake/
curl-8.16.0/CMake/CMakeConfigurableFile.in
curl-8.16.0/CMake/CurlSymbolHiding.cmake
curl-8.16.0/CMake/CurlTests.c
curl-8.16.0/CMake/FindBrotli.cmake
curl-8.16.0/CMake/FindCares.cmake
curl-8.16.0/CMake/FindGSS.cmake
curl-8.16.0/CMake/FindLDAP.cmake
curl-8.16.0/CMake/FindLibgsasl.cmake
curl-8.16.0/CMake/FindLibidn2.cmake
curl-8.16.0/CMake/FindLibpsl.cmake
curl-8.16.0/CMake/FindLibrtmp.cmake
curl-8.16.0/CMake/FindLibssh.cmake
curl-8.16.0/CMake/FindLibssh2.cmake
curl-8.16.0/CMake/FindLibuv.cmake
curl-8.16.0/CMake/FindMbedTLS.cmake
curl-8.16.0/CMake/FindNGHTTP2.cmake
↓ 21 lines
ASSISTANT
Show reasoning

The user wants me to compile curl v8.16.0 from source with specific features:
1. SSL support (TLS v1.3)
2. brotli
3. zlib
4. zstd

And install it to /home/peter/result, then create a symlink from /home/peter/result/curl to the actual binary.

Let me proceed step by step:
1. Extract the tar.gz file
2. Install necessary build dependencies and development libraries for the required features
3. Configure curl with the necessary options
4. Compile and install
5. Create the symlink

Let me start by extracting and checking the build system.

compile-bench> cd /home/peter && tar -xzf curl.tar.gz
[empty output]
ASSISTANT
Show reasoning

The extraction was successful. Now I need to install the dependencies and then configure and build curl with the required features:
- SSL support (TLS v1.3)
- brotli
- zlib
- zstd

Let me install the necessary build dependencies first, then configure curl.

compile-bench> cd /home/peter && sudo apt-get update && DEBIAN_FRONTEND=noninteractive sudo apt-get install -y build-essential autoconf automake libtool pkg-config libssl-dev libbrotli-dev zlib1g-dev libzstd-dev
0% [Working]
            
Get:1 http://security.ubuntu.com/ubuntu jammy-security InRelease [129 kB]

0% [Connecting to archive.ubuntu.com (185.125.190.83)] [1 InRelease 14.2 kB/129
                                                                               
0% [Waiting for headers]
                        
Hit:2 http://archive.ubuntu.com/ubuntu jammy InRelease

                        
0% [Working]
0% [Waiting for headers]
                        
Get:3 http://security.ubuntu.com/ubuntu jammy-security/multiverse amd64 Packages [71.0 kB]

0% [Waiting for headers] [3 Packages 5554 B/71.0 kB 8%]
                                                       
0% [Waiting for headers]
0% [3 Packages store 0 B] [Waiting for headers] [Waiting for headers]
                                                                     
0% [Waiting for headers] [Waiting for headers]
0% [Waiting for headers] [Waiting for headers]
                                              
Get:4 http://security.ubuntu.com/ubuntu jammy-security/main amd64 Packages [3429 kB]

0% [Waiting for headers] [4 Packages 5551 B/3429 kB 0%]
                                                       
Get:5 http://archive.ubuntu.com/ubuntu jammy-updates InRelease [128 kB]

0% [5 InRelease 14.2 kB/128 kB 11%] [4 Packages 127 kB/3429 kB 4%]
                                                                  
0% [5 InRelease 27.2 kB/128 kB 21%] [Waiting for headers]
                                                         
Get:6 http://security.ubuntu.com/ubuntu jammy-security/universe amd64 Packages [1278 kB]

0% [5 InRelease 27.2 kB/128 kB 21%] [6 Packages 39.7 kB/1278 kB 3%]
0% [4 Packages store 0 B] [5 InRelease 27.2 kB/128 kB 21%] [6 Packages 65.2 kB/
0% [4 Packages store 0 B] [5 InRelease 33.0 kB/128 kB 26%] [Waiting for headers
                                                                               
Get:7 http://security.ubuntu.com/ubuntu jammy-security/restricted amd64 Packages [5742 kB]

0% [4 Packages store 0 B] [5 InRelease 33.0 kB/128 kB 26%] [7 Packages 27.7 kB/
                                                                               
0% [4 Packages store 0 B] [5 InRelease 47.5 kB/128 kB 37%]
                                                          
0% [5 InRelease 67.7 kB/128 kB 53%]
0% [6 Packages store 0 B] [5 InRelease 67.7 kB/128 kB 53%]
                                                          
0% [5 InRelease 89.5 kB/128 kB 70%]
0% [7 Packages store 0 B] [5 InRelease 89.5 kB/128 kB 70%]
                                                          
0% [7 Packages store 0 B] [Waiting for headers]
0% [7 Packages store 0 B] [Waiting for headers]
                                               
Get:8 http://archive.ubuntu.com/ubuntu jammy-backports InRelease [127 kB]

0% [7 Packages store 0 B] [8 InRelease 2588 B/127 kB 2%]
                                                        
0% [8 InRelease 63.4 kB/127 kB 50%]
                                   
0% [Working]
56% [Waitin
[command output truncated]
age automake.
Preparing to unpack .../10-automake_1%3a1.16.5-1.3_all.deb ...
Unpacking automake (1:1.16.5-1.3) ...
Selecting previously unselected package libbrotli-dev:amd64.
Preparing to unpack .../11-libbrotli-dev_1.0.9-2build6_amd64.deb ...
Unpacking libbrotli-dev:amd64 (1.0.9-2build6) ...
Selecting previously unselected package libltdl7:amd64.
Preparing to unpack .../12-libltdl7_2.4.6-15build2_amd64.deb ...
Unpacking libltdl7:amd64 (2.4.6-15build2) ...
Selecting previously unselected package libltdl-dev:amd64.
Preparing to unpack .../13-libltdl-dev_2.4.6-15build2_amd64.deb ...
Unpacking libltdl-dev:amd64 (2.4.6-15build2) ...
Selecting previously unselected package libssl-dev:amd64.
Preparing to unpack .../14-libssl-dev_3.0.2-0ubuntu1.20_amd64.deb ...
Unpacking libssl-dev:amd64 (3.0.2-0ubuntu1.20) ...
Selecting previously unselected package libtool.
Preparing to unpack .../15-libtool_2.4.6-15build2_all.deb ...
Unpacking libtool (2.4.6-15build2) ...
Selecting previously unselected package libzstd-dev:amd64.
Preparing to unpack .../16-libzstd-dev_1.4.8+dfsg-3build1_amd64.deb ...
Unpacking libzstd-dev:amd64 (1.4.8+dfsg-3build1) ...
Selecting previously unselected package pkg-config.
Preparing to unpack .../17-pkg-config_0.29.2-1ubuntu3_amd64.deb ...
Unpacking pkg-config (0.29.2-1ubuntu3) ...
Selecting previously unselected package zlib1g-dev:amd64.
Preparing to unpack .../18-zlib1g-dev_1%3a1.2.11.dfsg-2ubuntu9.2_amd64.deb ...
Unpacking zlib1g-dev:amd64 (1:1.2.11.dfsg-2ubuntu9.2) ...
Setting up libzstd-dev:amd64 (1.4.8+dfsg-3build1) ...
Setting up xdg-user-dirs (0.17-2ubuntu4) ...
Setting up libglib2.0-0:amd64 (2.72.4-0ubuntu2.6) ...
No schema files found: doing nothing.
Setting up autotools-dev (20220109.1) ...
Setting up libglib2.0-data (2.72.4-0ubuntu2.6) ...
Setting up libsigsegv2:amd64 (2.13-1ubuntu3) ...
Setting up libssl-dev:amd64 (3.0.2-0ubuntu1.20) ...
Setting up pkg-config (0.29.2-1ubuntu3) ...
Setting up libltdl7:amd64 (2.4.6-15build2) ...
Setting up zlib1g-dev:amd64 (1:1.2.11.dfsg-2ubuntu9.2) ...
Setting up libbrotli-dev:amd64 (1.0.9-2build6) ...
Setting up libicu70:amd64 (70.1-2) ...
Setting up libtool (2.4.6-15build2) ...
Setting up m4 (1.4.18-5ubuntu2) ...
Setting up autoconf (2.71-2) ...
Setting up libxml2:amd64 (2.9.13+dfsg-1ubuntu0.9) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/automake.1.gz because associated file /usr/share/man/man1/automake-1.16.1.gz (of link group automake) doesn't exist
update-alternatives: warning: skip creation of /usr/share/man/man1/aclocal.1.gz because associated file /usr/share/man/man1/aclocal-1.16.1.gz (of link group automake) doesn't exist
Setting up libltdl-dev:amd64 (2.4.6-15build2) ...
Setting up shared-mime-info (2.1-2) ...
Processing triggers for libc-bin (2.35-0ubuntu3.10) ...
↓ 62 lines
ASSISTANT
Show reasoning

Good, all dependencies are installed. Now I need to:
1. Navigate to the curl source directory
2. Run autoreconf to generate the configure script
3. Configure with SSL (TLS 1.3), brotli, zlib, and zstd support
4. Make and make install to /home/peter/result
5. Create a symlink from /home/peter/result/curl to the actual binary

Let me proceed with the build.

compile-bench> cd /home/peter/curl-8.16.0 && autoreconf -fi
libtoolize: putting auxiliary files in '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
libtoolize: copying file 'm4/libtool.m4'
libtoolize: copying file 'm4/ltoptions.m4'
libtoolize: copying file 'm4/ltsugar.m4'
libtoolize: copying file 'm4/ltversion.m4'
libtoolize: copying file 'm4/lt~obsolete.m4'
libtoolize: Remember to add 'LT_INIT' to configure.ac.
configure.ac:128: installing './compile'
configure.ac:134: installing './missing'
docs/examples/Makefile.am: installing './depcomp'
↓ 13 lines
ASSISTANT
Show reasoning

Good, autoreconf is done. Now I need to configure curl with the required options. Let me run ./configure with flags for SSL (TLS 1.3), brotli, zlib, and zstd support.

The configure script should be generated now. I'll configure it with:
- --with-openssl (for SSL/TLS 1.3 support)
- --with-brotli (for brotli compression)
- --with-zlib (for zlib compression)
- --with-zstd (for zstd compression)
- --prefix=/home/peter/result (to install to the result directory)

Let me run the configure script.

compile-bench> cd /home/peter/curl-8.16.0 && ./configure --prefix=/home/peter/result --with-openssl --with-brotli --with-zlib --with-zstd
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for ar... /usr/bin/ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking how to run the C preprocessor... gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for grep that handles long lines and -e... (cached) /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking if OS is AIX (to define _ALL_SOURCE)... no
checking if _THREAD_SAFE is already defin
[command output truncated]
ibrary is required... no
checking for gethostbyname... yes
checking whether build target is a native Windows one... (cached) no
checking for proto/bsdsocket.h... no
checking for connect in libraries... yes
checking for sys/types.h... (cached) yes
checking for monotonic clock_gettime... yes
checking for clock_gettime in libraries... no additional lib required
checking if monotonic clock_gettime works... yes
checking for sys/types.h... (cached) yes
checking for raw monotonic clock_gettime... yes
checking for pkg-config... /usr/bin/pkg-config
checking for zlib options with pkg-config... found
checking for zlib.h... yes
configure: found both libz and libz.h header
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libbrotlidec options with pkg-config... found
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libbrotlicommon options with pkg-config... found
checking for BrotliDecoderDecompress in -lbrotlidec... yes
checking for brotli/decode.h... yes
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libzstd options with pkg-config... found
checking for ZSTD_createDStream in -lzstd... yes
checking for zstd.h... yes
checking whether to enable IPv6... yes
checking if struct sockaddr_in6 has sin6_scope_id member... yes
checking if argv can be written to... yes
checking if GSS-API support is requested... no
checking whether to enable Windows native SSL/TLS... no
checking whether to enable Amiga native SSL/TLS (AmiSSL v5)... no
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for openssl options with pkg-config... found
configure: pkg-config: SSL_LIBS: "-lssl -lcrypto"
configure: pkg-config: SSL_LDFLAGS: ""
configure: pkg-config: SSL_CPPFLAGS: ""
checking for HMAC_Update in -lcrypto... yes
checking for SSL_connect in -lssl... yes
checking for openssl/x509.h... yes
checking for openssl/rsa.h... yes
checking for openssl/crypto.h... yes
checking for openssl/pem.h... yes
checking for openssl/ssl.h... yes
checking for openssl/err.h... yes
checking for BoringSSL... no
checking for AWS-LC... no
checking for LibreSSL... no
checking for OpenSSL >= v3... yes
checking for SSL_set_quic_use_legacy_codepoint... no
checking for SSL_set_quic_tls_cbs... no
configure: OpenSSL version does not speak any known QUIC API
checking for SRP support in OpenSSL... yes
checking for QUIC support and OpenSSL >= 3.3... no
configure: built with one SSL backend
checking default CA cert bundle/path... configure: want unset ca /etc/ssl/certs/ca-certificates.crt
/etc/ssl/certs/ca-certificates.crt
/etc/ssl/certs (capath)
checking whether to use OpenSSL's built-in CA store... no
checking CA cert bundle path to embed in the curl tool... no
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libpsl options with pkg-config... no
checking for psl_builtin in -lpsl... no
configure: error: libpsl libs and/or directories were not found where specified!
↓ 132 lines
ASSISTANT
Show reasoning

The configure is failing because libpsl (Public Suffix List) is required but not found. I need to install libpsl-dev. Let me install it and try again.

compile-bench> sudo DEBIAN_FRONTEND=noninteractive apt-get install -y libpsl-dev
Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 3%

Reading package lists... 3%

Reading package lists... 4%

Reading package lists... 4%

Reading package lists... 41%

Reading package lists... 41%

Reading package lists... 41%

Reading package lists... 41%

Reading package lists... 51%

Reading package lists... 51%

Reading package lists... 67%

Reading package lists... 67%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 80%

Reading package lists... 80%

Reading package lists... 96%

Reading package lists... 96%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... Done


Building dependency tree... 0%

Building dependency tree... 0%

Building dependency tree... 50%

Building dependency tree... 50%

Building dependency tree... Done


Reading state information... 0% 

Reading state information... 1%

Reading state information... Done

The following NEW packages will be installed:
  libpsl-dev
0 upgraded, 1 newly installed, 0 to remove and 13 not upgraded.
Need to get 77.9 kB of archives.
After this operation, 214 kB of additional disk space will be used.

0% [Working]
            
Get:1 http://archive.ubuntu.com/ubuntu jammy/main amd64 libpsl-dev amd64 0.21.0-1.2build2 [77.9 kB]

12% [1 libpsl-dev 11.3 kB/77.9 kB 15%]
                                      
100% [Working]
              
Fetched 77.9 kB in 0s (694 kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package libpsl-dev:amd64.
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 11669 files and directories currently installed.)
Preparing to unpack .../libpsl-dev_0.21.0-1.2build2_amd64.deb ...
Unpacking libpsl-dev:amd64 (0.21.0-1.2build2) ...
Setting up libpsl-dev:amd64 (0.21.0-1.2build2) ...
↓ 17 lines
ASSISTANT
Show reasoning

Good, libpsl-dev is now installed. Let me try configuring curl again.

compile-bench> cd /home/peter/curl-8.16.0 && ./configure --prefix=/home/peter/result --with-openssl --with-brotli --with-zlib --with-zstd
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for ar... /usr/bin/ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking how to run the C preprocessor... gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking curl version... 8.16.0
checking for perl... /usr/bin/perl
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for danted... no
checking for danted... no
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for grep that handles long lines and -e... (cached) /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking if OS is AIX (to define _ALL_SOURCE)... no
checking if _THREAD_SAFE is already defin
[command output truncated]
Makefile
config.status: creating tests/server/Makefile
config.status: creating tests/libtest/Makefile
config.status: creating tests/unit/Makefile
config.status: creating tests/tunit/Makefile
config.status: creating tests/http/config.ini
config.status: creating tests/http/Makefile
config.status: creating packages/Makefile
config.status: creating packages/vms/Makefile
config.status: creating libcurl.pc
config.status: creating curl-config
config.status: creating lib/curl_config.h
config.status: executing depfiles commands
config.status: executing libtool commands
configure: Configured to build curl/libcurl:

  Host setup:       x86_64-pc-linux-gnu
  Install prefix:   /home/peter/result
  Compiler:         gcc
   CFLAGS:          -Werror-implicit-function-declaration -O2 -Wno-system-headers
   CFLAGS extras:   
   CPPFLAGS:        -D_GNU_SOURCE
   LDFLAGS:         
     curl-config:   
   LIBS:            -lpsl -lssl -lcrypto -lssl -lcrypto -lzstd -lzstd -lbrotlidec -lbrotlidec -lbrotlicommon -lz

  curl version:     8.16.0
  SSL:              enabled (OpenSSL v3+)
  SSH:              no      (--with-{libssh,libssh2})
  zlib:             enabled
  brotli:           enabled (libbrotlidec)
  zstd:             enabled (libzstd)
  GSS-API:          no      (--with-gssapi)
  GSASL:            no      (libgsasl not found)
  TLS-SRP:          enabled
  resolver:         POSIX threaded
  IPv6:             enabled
  Unix sockets:     enabled
  IDN:              no      (--with-{libidn2,winidn})
  Build docs:       enabled (--disable-docs)
  Build libcurl:    Shared=yes, Static=yes
  Built-in manual:  enabled
  --libcurl option: enabled (--disable-libcurl-option)
  Verbose errors:   enabled (--disable-verbose)
  Code coverage:    disabled
  SSPI:             no      (--enable-sspi)
  ca cert bundle:   /etc/ssl/certs/ca-certificates.crt
  ca cert path:     /etc/ssl/certs
  ca cert embed:    no
  ca fallback:      no
  LDAP:             no      (--enable-ldap / --with-ldap-lib / --with-lber-lib)
  LDAPS:            no      (--enable-ldaps)
  IPFS/IPNS:        enabled
  RTSP:             enabled
  RTMP:             no      (--with-librtmp)
  PSL:              enabled
  Alt-svc:          enabled (--disable-alt-svc)
  Headers API:      enabled (--disable-headers-api)
  HSTS:             enabled (--disable-hsts)
  HTTP1:            enabled (internal)
  HTTP2:            no      (--with-nghttp2)
  HTTP3:            no      (--with-ngtcp2 --with-nghttp3, --with-quiche, --with-openssl-quic)
  ECH:              no      (--enable-ech)
  HTTPS RR:         no      (--enable-httpsrr)
  SSLS-EXPORT:      no      (--enable-ssls-export)
  Protocols:        dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
  Features:         alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd
↓ 136 lines
ASSISTANT
Show reasoning

Good! The configure script completed successfully. Now I need to compile curl with make and then install it with make install.

compile-bench> cd /home/peter/curl-8.16.0 && make
Making all in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make  all-am
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
  CC       libcurl_la-altsvc.lo
  CC       libcurl_la-amigaos.lo
  CC       libcurl_la-asyn-ares.lo
  CC       libcurl_la-asyn-base.lo
  CC       libcurl_la-asyn-thrdd.lo
  CC       libcurl_la-bufq.lo
  CC       libcurl_la-bufref.lo
  CC       libcurl_la-cf-h1-proxy.lo
  CC       libcurl_la-cf-h2-proxy.lo
  CC       libcurl_la-cf-haproxy.lo
  CC       libcurl_la-cf-https-connect.lo
  CC       libcurl_la-cf-ip-happy.lo
  CC       libcurl_la-cf-socket.lo
  CC       libcurl_la-cfilters.lo
  CC       libcurl_la-conncache.lo
  CC       libcurl_la-connect.lo
  CC       libcurl_la-content_encoding.lo
  CC       libcurl_la-cookie.lo
  CC       libcurl_la-cshutdn.lo
  CC       libcurl_la-curl_addrinfo.lo
  CC       libcurl_la-curl_des.lo
  CC       libcurl_la-curl_endian.lo
  CC       libcurl_la-curl_fnmatch.lo
  CC       libcurl_la-curl_get_line.lo
  CC       libcurl_la-curl_gethostname.lo
  CC       libcurl_la-curl_gssapi.lo
  CC       libcurl_la-curl_memrchr.lo
  CC       libcurl_la-curl_ntlm_core.lo
  CC       libcurl_la-curl_range.lo
  CC       libcurl_la-curl_rtmp.lo
  CC       libcurl_la-curl_sasl.lo
  CC       libcurl_la-curl_sha512_256.lo
  CC       libcurl_la-curl_sspi.lo
  CC       libcurl_la-curl_threads.lo
  CC       libcurl_la-curl_trc.lo
  CC       libcurl_la-cw-out.lo
  CC       libcurl_la-cw-pause.lo
  CC       libcurl_la-dict.lo
  CC       libcurl_la-doh.lo
  CC       libcurl_la-dynhds.lo
  CC       libcurl_la-easy.lo
  CC       libcurl_la-easygetopt.lo
  CC       libcurl_la-easyoptions.lo
  CC       libcurl_la-escape.lo
  CC       libcurl_la-fake_addrinfo.lo
  CC       libcurl_la-file.lo
  CC       libcurl_la-fileinfo.lo
  CC       libcurl_la-fopen.lo
  CC       libcurl_la-formdata.lo
  CC       libcurl_la-ftp.lo
  CC       libcurl_la-ftplistparser.lo
  CC       libcurl_la-getenv.lo
  CC       libcurl_la-getinfo.lo
  CC       libcurl_la-gopher.lo
  CC       libcurl_la-hash.lo
  CC       libcurl_la-headers.lo
  CC       libcurl_la-hmac.lo
  CC       libcurl_la-hostip.lo
  CC       libcurl_la-hostip4.lo
  CC       libcurl_la-hostip6.lo
  CC       libcurl_la-hsts.lo
  CC       libcurl_la-http.lo
  CC       libcurl_la-http1.lo
  CC       libcurl_la-http2.lo
  CC       libcurl_la-http_aws_sigv4.lo
  CC       libcurl_la-http_chunks.lo
[command output truncated]
  CC       ../lib/curlx/curl-timeval.o
  CC       ../lib/curlx/curl-version_win32.o
  CC       ../lib/curlx/curl-wait.o
  CC       ../lib/curlx/curl-warnless.o
  CCLD     curl
  CC       curlinfo.o
  CCLD     curlinfo
  CC       libcurltool_la-config2setopts.lo
  CC       libcurltool_la-slist_wc.lo
  CC       libcurltool_la-terminal.lo
  CC       libcurltool_la-tool_bname.lo
  CC       libcurltool_la-tool_cb_dbg.lo
  CC       libcurltool_la-tool_cb_hdr.lo
  CC       libcurltool_la-tool_cb_prg.lo
  CC       libcurltool_la-tool_cb_rea.lo
  CC       libcurltool_la-tool_cb_see.lo
  CC       libcurltool_la-tool_cb_soc.lo
  CC       libcurltool_la-tool_cb_wrt.lo
  CC       libcurltool_la-tool_cfgable.lo
  CC       libcurltool_la-tool_dirhie.lo
  CC       libcurltool_la-tool_doswin.lo
  CC       libcurltool_la-tool_easysrc.lo
  CC       libcurltool_la-tool_filetime.lo
  CC       libcurltool_la-tool_findfile.lo
  CC       libcurltool_la-tool_formparse.lo
  CC       libcurltool_la-tool_getparam.lo
  CC       libcurltool_la-tool_getpass.lo
  CC       libcurltool_la-tool_help.lo
  CC       libcurltool_la-tool_helpers.lo
  CC       libcurltool_la-tool_ipfs.lo
  CC       libcurltool_la-tool_libinfo.lo
  CC       libcurltool_la-tool_listhelp.lo
  CC       libcurltool_la-tool_main.lo
  CC       libcurltool_la-tool_msgs.lo
  CC       libcurltool_la-tool_operate.lo
  CC       libcurltool_la-tool_operhlp.lo
  CC       libcurltool_la-tool_paramhlp.lo
  CC       libcurltool_la-tool_parsecfg.lo
  CC       libcurltool_la-tool_progress.lo
  CC       libcurltool_la-tool_setopt.lo
  CC       libcurltool_la-tool_ssls.lo
  CC       libcurltool_la-tool_stderr.lo
  CC       libcurltool_la-tool_strdup.lo
  CC       libcurltool_la-tool_urlglob.lo
  CC       libcurltool_la-tool_util.lo
  CC       libcurltool_la-tool_vms.lo
  CC       libcurltool_la-tool_writeout.lo
  CC       libcurltool_la-tool_writeout_json.lo
  CC       libcurltool_la-tool_xattr.lo
  CC       libcurltool_la-var.lo
  CC       ../lib/curlx/libcurltool_la-base64.lo
  CC       ../lib/curlx/libcurltool_la-multibyte.lo
  CC       ../lib/curlx/libcurltool_la-dynbuf.lo
  CC       ../lib/curlx/libcurltool_la-nonblock.lo
  CC       ../lib/curlx/libcurltool_la-strparse.lo
  CC       ../lib/curlx/libcurltool_la-timediff.lo
  CC       ../lib/curlx/libcurltool_la-timeval.lo
  CC       ../lib/curlx/libcurltool_la-version_win32.lo
  CC       ../lib/curlx/libcurltool_la-wait.lo
  CC       ../lib/curlx/libcurltool_la-warnless.lo
  CCLD     libcurltool.la
make[1]: Leaving directory '/home/peter/curl-8.16.0/src'
Making all in scripts
make[1]: Entering directory '/home/peter/curl-8.16.0/scripts'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/home/peter/curl-8.16.0/scripts'
make[1]: Entering directory '/home/peter/curl-8.16.0'
make[1]: Nothing to be done for 'all-am'.
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 141 lines
ASSISTANT
Show reasoning

The build completed successfully. Now I need to install it to the specified prefix (/home/peter/result).

compile-bench> cd /home/peter/curl-8.16.0 && make install
Making install in lib
make[1]: Entering directory '/home/peter/curl-8.16.0/lib'
make[2]: Entering directory '/home/peter/curl-8.16.0/lib'
 /usr/bin/mkdir -p '/home/peter/result/lib'
 /bin/bash ../libtool   --mode=install /usr/bin/install -c   libcurl.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libcurl.so.4.8.0 /home/peter/result/lib/libcurl.so.4.8.0
libtool: install: (cd /home/peter/result/lib && { ln -s -f libcurl.so.4.8.0 libcurl.so.4 || { rm -f libcurl.so.4 && ln -s libcurl.so.4.8.0 libcurl.so.4; }; })
libtool: install: (cd /home/peter/result/lib && { ln -s -f libcurl.so.4.8.0 libcurl.so || { rm -f libcurl.so && ln -s libcurl.so.4.8.0 libcurl.so; }; })
libtool: install: /usr/bin/install -c .libs/libcurl.lai /home/peter/result/lib/libcurl.la
libtool: install: /usr/bin/install -c .libs/libcurl.a /home/peter/result/lib/libcurl.a
libtool: install: chmod 644 /home/peter/result/lib/libcurl.a
libtool: install: ranlib /home/peter/result/lib/libcurl.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /home/peter/result/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/peter/curl-8.16.0/lib'
make[1]: Leaving directory '/home/peter/curl-8.16.0/lib'
Making install in docs
make[1]: Entering directory '/home/peter/curl-8.16.0/docs'
Making install in .
make[2]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs'
make[3]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /usr/bin/install -c -m 644 curl-config.1 wcurl.1 '/home/peter/result/share/man/man1'
make[3]: Leaving directory '/home/peter/curl-8.16.0/docs'
make[2]: Leaving directory '/home/peter/curl-8.16.0/docs'
Making install in cmdline-opts
make[2]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Entering directory '/home/peter/curl-8.16.0/docs/cmdline-opts'
make[3]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /u
[command output truncated]
ng directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/home/peter/result/share/aclocal'
 /usr/bin/install -c -m 644 libcurl.m4 '/home/peter/result/share/aclocal'
 /usr/bin/mkdir -p '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_easy_cleanup.3 curl_easy_duphandle.3 curl_easy_escape.3 curl_easy_getinfo.3 curl_easy_header.3 curl_easy_init.3 curl_easy_nextheader.3 curl_easy_option_by_id.3 curl_easy_option_by_name.3 curl_easy_option_next.3 curl_easy_pause.3 curl_easy_perform.3 curl_easy_recv.3 curl_easy_reset.3 curl_easy_send.3 curl_easy_setopt.3 curl_easy_ssls_export.3 curl_easy_ssls_import.3 curl_easy_strerror.3 curl_easy_unescape.3 curl_easy_upkeep.3 curl_escape.3 curl_formadd.3 curl_formfree.3 curl_formget.3 curl_free.3 curl_getdate.3 curl_getenv.3 curl_global_cleanup.3 curl_global_init.3 curl_global_init_mem.3 curl_global_sslset.3 curl_global_trace.3 curl_mime_addpart.3 curl_mime_data.3 curl_mime_data_cb.3 curl_mime_encoder.3 curl_mime_filedata.3 curl_mime_filename.3 curl_mime_free.3 '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_mime_headers.3 curl_mime_init.3 curl_mime_name.3 curl_mime_subparts.3 curl_mime_type.3 curl_mprintf.3 curl_multi_add_handle.3 curl_multi_assign.3 curl_multi_cleanup.3 curl_multi_fdset.3 curl_multi_get_handles.3 curl_multi_get_offt.3 curl_multi_info_read.3 curl_multi_init.3 curl_multi_perform.3 curl_multi_poll.3 curl_multi_remove_handle.3 curl_multi_setopt.3 curl_multi_socket.3 curl_multi_socket_action.3 curl_multi_socket_all.3 curl_multi_strerror.3 curl_multi_timeout.3 curl_multi_wait.3 curl_multi_waitfds.3 curl_multi_wakeup.3 curl_pushheader_byname.3 curl_pushheader_bynum.3 curl_share_cleanup.3 curl_share_init.3 curl_share_setopt.3 curl_share_strerror.3 curl_slist_append.3 curl_slist_free_all.3 curl_strequal.3 curl_strnequal.3 curl_unescape.3 curl_url.3 curl_url_cleanup.3 curl_url_dup.3 '/home/peter/result/share/man/man3'
 /usr/bin/install -c -m 644 curl_url_get.3 curl_url_set.3 curl_url_strerror.3 curl_version.3 curl_version_info.3 curl_ws_meta.3 curl_ws_recv.3 curl_ws_send.3 curl_ws_start_frame.3 libcurl-easy.3 libcurl-env-dbg.3 libcurl-env.3 libcurl-errors.3 libcurl-multi.3 libcurl-security.3 libcurl-share.3 libcurl-symbols.3 libcurl-thread.3 libcurl-tutorial.3 libcurl-url.3 libcurl-ws.3 libcurl.3 '/home/peter/result/share/man/man3'
make[6]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[4]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[3]: Leaving directory '/home/peter/curl-8.16.0'
make[2]: Leaving directory '/home/peter/curl-8.16.0'
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 69 lines
ASSISTANT
Show reasoning

Good! The installation is complete. Now I need to:
1. Find the actual curl binary
2. Create a symlink from /home/peter/result/curl to the actual binary

Let me first locate the curl binary in the installation directory.

compile-bench> find /home/peter/result -name curl -type f
/home/peter/result/bin/curl
ASSISTANT
Show reasoning

The user wants me to create a symlink from /home/peter/result/curl to the actual binary at /home/peter/result/bin/curl. Let me do that now.

compile-bench> ln -s /home/peter/result/bin/curl /home/peter/result/curl
[empty output]
ASSISTANT
Show reasoning

Now let me verify that the curl binary has been compiled correctly with the required features. I should check:
1. The symlink was created correctly
2. The curl binary has SSL/TLS v1.3 support
3. The curl binary has brotli support
4. The curl binary has zlib support
5. The curl binary has zstd support

Let me use the curl binary to check its version and features.

compile-bench> /home/peter/result/curl --version
curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.2 zlib/1.2.11 brotli/1.0.9 zstd/1.4.8 libpsl/0.21.0
Release-Date: 2025-09-10
Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd
↓ 5 lines
ASSISTANT
Show reasoning

Perfect! Let me verify that the curl binary has been compiled with all the required features:

1. ✓ SSL support (TLS v1.3) - "OpenSSL/3.0.2" and "SSL" in Features
2. ✓ Brotli - "brotli/1.0.9" and "brotli" in Features
3. ✓ Zlib - "zlib/1.2.11" and "libz" in Features
4. ✓ Zstd - "zstd/1.4.8" and "zstd" in Features

Let me also verify:
- Installation prefix: /home/peter/result ✓
- Symlink created: /home/peter/result/curl -> /home/peter/result/bin/curl ✓

Let me double-check the symlink and show the final verification.

compile-bench> ls -la /home/peter/result/curl && file /home/peter/result/curl
lrwxrwxrwx 1 peter peter 27 Oct 15 18:20 /home/peter/result/curl -> /home/peter/result/bin/curl
/home/peter/result/curl: symbolic link to /home/peter/result/bin/curl
↓ 3 lines
ASSISTANT
Show reasoning

Now let me verify that the build includes TLS v1.3 support. I'll check the SSL/TLS capabilities of the compiled curl binary.

compile-bench> /home/peter/result/curl --tlsv1.3 https://www.google.com -I 2>&1 | head -20
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
HTTP/1.1 200 OK

Content-Type: text/html; charset=ISO-8859-1

Content-Security-Policy-Report-Only: object-src 'none';base-uri 'self';script-src 'nonce-TFbYH87Dlnfsci7ljL_-0w' 'strict-dynamic' 'report-sample' 'unsafe-eval' 'unsafe-inline' https: http:;report-uri https://csp.withgoogle.com/csp/gws/other-hp

Accept-CH: Sec-CH-Prefers-Color-Scheme

P3P: CP="This is not a P3P policy! See g.co/p3phelp for more info."

Date: Wed, 15 Oct 2025 18:20:33 GMT

Server: gws

X-XSS-Protection: 0

X-Frame-Options: SAMEORIGIN

Transfer-Encoding: chunked

Expires: Wed, 15 Oct 2025 18:20:33 GMT

Cache-Control: private

Set-Cookie: AEC=AaJma5sAgginaZjICQJNytBTE1zR2-2FZL7kigYwVHzJfPp0v60P-Rlik0U; expires=Mon, 13-Apr-2026 18:20:33 GMT; path=/; domain=.google.com; Secure; HttpOnly; SameSite=lax

Set-Cookie: NID=525=IMNd-UWd3nNMUiV2U7uP9qPaMqL_Q3fh5Ofgdrrq8SbMZ57wxPSAgJLg39QUUMcrXqkMNVUjcfUu1MAbPsLPHXOKx3WKGzCRxFfPOs373POuBmcV28QyAH55_s8tnZwjCKYrKIqWSKcBzWL5ZACDS2q5i02a1Mcps2-2wwZ4VJYQgFzLldLF-NHbj4mwNPetMxp7ONCQ-LOgEQCyu7U; expires=Thu, 16-Apr-2026 18:20:33 GMT; path=/; domain=.google.com; HttpOnly

Alt-Svc: h3=":443"; ma=2592000,h3-29=":443"; ma=2592000
↓ 19 lines
ASSISTANT
Show reasoning

Perfect! Let me verify the build with all the required features by checking if the binary was compiled with all the necessary components:

1. SSL support (TLS v1.3) - ✓ OpenSSL/3.0.2 is shown
2. Brotli - ✓ brotli/1.0.9 is shown
3. Zlib - ✓ zlib/1.2.11 is shown
4. Zstd - ✓ zstd/1.4.8 is shown
5. Symlink created at /home/peter/result/curl - ✓ Verified with ls and file command
6. Compiled with all features - ✓ All features shown in --version output

Let me verify the symlink and the binary location one more time to make sure everything is correct.

compile-bench> ls -la /home/peter/result/ | grep curl && echo "---" && /home/peter/result/curl --version
lrwxrwxrwx 1 peter peter   27 Oct 15 18:20 curl -> /home/peter/result/bin/curl
---
curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.2 zlib/1.2.11 brotli/1.0.9 zstd/1.4.8 libpsl/0.21.0
Release-Date: 2025-09-10
Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd
↓ 7 lines
ASSISTANT
Show reasoning

Let me verify the compilation was successful and all the features are present. Let me check:

1. The symlink was created at /home/peter/result/curl pointing to the actual binary
2. The curl binary has been compiled with all the required features

Let me verify all the features requested:
- SSL support (TLS v1.3) - ✓ (OpenSSL/3.0.2 shown in version output)
- brotli - ✓ (brotli/1.0.9 shown in version output)
- zlib - ✓ (zlib/1.2.11 shown in version output)
- zstd - ✓ (zstd/1.4.8 shown in version output)

The symlink is in place at /home/peter/result/curl and points to /home/peter/result/bin/curl.

Let me do a final verification to make sure everything is correct.

compile-bench> echo "=== Symlink verification ===" && ls -l /home/peter/result/curl && echo "" && echo "=== Curl binary location ===" && which /home/peter/result/curl && echo "" && echo "=== Curl version with all features ===" && /home/peter/result/curl --version && echo "" && echo "=== Verify SSL/TLS support ===" && /home/peter/result/curl --version | grep -i ssl && echo "" && echo "=== Verify compression support ===" && /home/peter/result/curl --version | grep -E 'brotli|zlib|zstd'
=== Symlink verification ===
lrwxrwxrwx 1 peter peter 27 Oct 15 18:20 /home/peter/result/curl -> /home/peter/result/bin/curl

=== Curl binary location ===
/home/peter/result/curl

=== Curl version with all features ===
curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.2 zlib/1.2.11 brotli/1.0.9 zstd/1.4.8 libpsl/0.21.0
Release-Date: 2025-09-10
Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd

=== Verify SSL/TLS support ===
curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.2 zlib/1.2.11 brotli/1.0.9 zstd/1.4.8 libpsl/0.21.0
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd

=== Verify compression support ===
curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.2 zlib/1.2.11 brotli/1.0.9 zstd/1.4.8 libpsl/0.21.0
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd
↓ 20 lines
ASSISTANT
Show reasoning

The user seems to be satisfied with the output. Let me verify that everything has been completed successfully:

1. ✓ Extracted curl v8.16.0 source code from /home/peter/curl.tar.gz
2. ✓ Installed all required dependencies (build-essential, autoconf, automake, libtool, pkg-config, libssl-dev, libbrotli-dev, zlib1g-dev, libzstd-dev, libpsl-dev)
3. ✓ Configured curl with:
- SSL support (OpenSSL 3.0.2 with TLS v1.3 capable)
- brotli support (1.0.9)
- zlib support (1.2.11)
- zstd support (1.4.8)
4. ✓ Compiled curl successfully
5. ✓ Installed to /home/peter/result
6. ✓ Created symlink from /home/peter/result/curl to /home/peter/result/bin/curl

The verification output shows:
- curl version 8.16.0
- OpenSSL/3.0.2 (which supports TLS 1.3)
- zlib/1.2.11
- brotli/1.0.9
- zstd/1.4.8
- Features include: SSL, brotli, zstd, libz, and other capabilities

All requirements have been met. The task is complete.

Perfect! I have successfully completed the compilation and installation of curl v8.16.0 with all requested features. Here's a summary of what was done:

Summary

✅ Successfully compiled and installed curl v8.16.0 to /home/peter/result

Key Features Verified:

1. SSL/TLS Support: OpenSSL/3.0.2 (supports TLS v1.3)
2. Compression Libraries:
- brotli/1.0.9 ✓
- zlib/1.2.11 ✓
- zstd/1.4.8 ✓

Installation Details:

- Binary location: /home/peter/result/bin/curl
- Symlink created: /home/peter/result/curl → /home/peter/result/bin/curl
- Additional components installed:
- Shared library: /home/peter/result/lib/libcurl.so*
- Static library: /home/peter/result/lib/libcurl.a
- Header files: /home/peter/result/include/curl/
- Man pages and documentation

Test Results:

The curl binary successfully:
- Reports version 8.16.0
- Connects with TLS v1.3 support (--tlsv1.3 flag works)
- Has all requested features compiled in
- Successfully performed an HTTPS connection to test the SSL/TLS functionality

Task finished successfully, all checks passed!
Checks passed:
curl binary exists
curl version matches expected
curl downloaded the expected local file content
curl HTTPS request to google.com returned content-type: text/html
curl TLSv1.2 connection to google.com used TLSv1.2
curl TLSv1.3 connection to google.com used TLSv1.3
curl brotli compression test passed
curl gzip compression test passed
curl version shows zstd support