Summary
Performance
| Cost | $0.005 |
| Total elapsed time | 2m5s |
| LLM inference time | 10s |
| Command execution time | 1m55s |
| Commands executed | 5 |
All details >
| Attempt ID | 21pe0ozs8m7fm | Attempt group | run-16-09-22-05 |
| Revision | fb5c74bd2fee | AWS Instance | m8i.2xlarge |
| Start time | 2025-09-16T20:09:04.897Z | End time | 2025-09-16T20:11:11.976Z |
| Task | curl-ssl | Environment | ubuntu-22.04-amd64 |
| Model |  gpt-4.1-mini | OpenRouter slug | openai/gpt-4.1-mini |
| Temperature | 1 | Explicit prompt caching | false |
| User msg after tool call | false | Max tool calls | 70 |
| Total timeout seconds | 900 | Single command timeout | 600 |
| Cost | $0.005 | Duration | 2m5s |
| LLM inference time | 10s | Command execution time | 1m55s |
| Final context tokens | 6,296 | Total output tokens | 522 |
| Output reasoning tokens | 0 | Messages | 13 |
| Assistant messages | 6 | User messages | 1 |
| System messages | 1 | Commands executed | 5 |
Task
Task: curl-ssl
curl 8.16.0 is a command-line HTTP client.
Project link: curl.se
Task:
Compile and install curl to a specific location. Build with SSL support (TLS v1.3), brotli, zlib and zstd.
Difficulties:
Installing dependencies can be tricky.
Environment:
Ubuntu 22.04 on amd64, with internet access.
Execution log
SYSTEM
You are a package-building specialist operating a Ubuntu 22.04 bash shell via one tool: run_terminal_cmd.
The current working directory of every run_terminal_cmd is /home/peter.
Execution rules:
- Always pass non-interactive flags for any command that could prompt (e.g., -y, --yes, DEBIAN_FRONTEND=noninteractive).
- Don't include any newlines in the command.
- You can use sudo.
If you encounter any errors or issues while doing the user's request, you must fix them and continue the task.
At the end verify you did the user request correctly.
USER
You are given a curl v8.16.0 source code at /home/peter/curl.tar.gz. Please compile curl and install it to /home/peter/result. Create a symlink from /home/peter/result/curl to the actual binary. Make sure it builds with SSL support (TLS v1.3), brotli, zlib and zstd.
ASSISTANT
compile-bench> mkdir -p /home/peter/result && tar -xzf /home/peter/curl.tar.gz -C /home/peter && cd /home/peter/curl-* && sudo apt-get update && sudo DEBIAN_FRONTEND=noninteractive apt-get install -y build-essential pkg-config libssl-dev libbrotli-dev libz-dev libzstd-dev && ./buildconf && ./configure --prefix=/home/peter/result --with-ssl --with-brotli --with-zlib --with-zstd && make && make install && ln -sf /home/peter/result/bin/curl /home/peter/result/curl
0% [Working]
Hit:1 http://archive.ubuntu.com/ubuntu jammy InRelease
0% [Waiting for headers] [Connecting to security.ubuntu.com (185.125.190.83)]
Get:2 http://archive.ubuntu.com/ubuntu jammy-updates InRelease [128 kB]
0% [2 InRelease 5484 B/128 kB 4%] [Connecting to security.ubuntu.com (185.125.1
0% [2 InRelease 35.9 kB/128 kB 28%] [Waiting for headers]
0% [Waiting for headers]
Get:3 http://archive.ubuntu.com/ubuntu jammy-backports InRelease [127 kB]
0% [3 InRelease 6932 B/127 kB 5%] [Waiting for headers]
0% [Waiting for headers]
0% [Waiting for headers]
Get:4 http://security.ubuntu.com/ubuntu jammy-security InRelease [129 kB]
0% [4 InRelease 14.2 kB/129 kB 11%]
Get:5 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 Packages [3626 kB]
0% [5 Packages 6999 B/3626 kB 0%] [4 InRelease 14.2 kB/129 kB 11%]
0% [5 Packages 214 kB/3626 kB 6%] [4 InRelease 14.2 kB/129 kB 11%]
0% [4 InRelease 37.3 kB/129 kB 29%]
0% [5 Packages store 0 B] [4 InRelease 37.3 kB/129 kB 29%]
Get:6 http://archive.ubuntu.com/ubuntu jammy-updates/universe amd64 Packages [1581 kB]
0% [5 Packages store 0 B] [6 Packages 15.7 kB/1581 kB 1%] [4 InRelease 43.1 kB/
0% [5 Packages store 0 B] [4 InRelease 43.1 kB/129 kB 33%]
0% [4 InRelease 75.0 kB/129 kB 58%]
0% [6 Packages store 0 B] [4 InRelease 75.0 kB/129 kB 58%]
0% [4 InRelease 101 kB/129 kB 78%]
0% [Working]
46% [Working]
Get:7 http://security.ubuntu.com/ubuntu jammy-security/main amd64 Packages [3311 kB]
46% [7 Packages 2655 B/3311 kB 0%]
63% [Working]
63% [7 Packages store 0 B]
Get:8 http://security.ubuntu.com/ubuntu jammy-security/multiverse amd64 Packages [80.3 kB]
63% [7 Packages store 0 B] [8 Packages 49.0 kB/80.3 kB 61%]
64% [7 Packages store 0 B] [Waiting for headers]
Get:9 http://security.ubuntu.com/ubuntu jammy-security/universe amd64 Packages [1274 kB]
64% [7 Packages store 0 B] [9 Packages 17.9 kB/1274 kB 1%]
65% [9 Packages 197 kB/1274 kB 15%]
65% [8 Packages store 0 B] [9 Packages 197 kB/1274 kB 15%]
[command output truncated]
ng database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 10711 files and directories currently installed.)
Preparing to unpack .../00-libglib2.0-0_2.72.4-0ubuntu2.6_amd64.deb ...
Unpacking libglib2.0-0:amd64 (2.72.4-0ubuntu2.6) ...
Selecting previously unselected package libglib2.0-data.
Preparing to unpack .../01-libglib2.0-data_2.72.4-0ubuntu2.6_all.deb ...
Unpacking libglib2.0-data (2.72.4-0ubuntu2.6) ...
Selecting previously unselected package libicu70:amd64.
Preparing to unpack .../02-libicu70_70.1-2_amd64.deb ...
Unpacking libicu70:amd64 (70.1-2) ...
Selecting previously unselected package libxml2:amd64.
Preparing to unpack .../03-libxml2_2.9.13+dfsg-1ubuntu0.9_amd64.deb ...
Unpacking libxml2:amd64 (2.9.13+dfsg-1ubuntu0.9) ...
Selecting previously unselected package shared-mime-info.
Preparing to unpack .../04-shared-mime-info_2.1-2_amd64.deb ...
Unpacking shared-mime-info (2.1-2) ...
Selecting previously unselected package xdg-user-dirs.
Preparing to unpack .../05-xdg-user-dirs_0.17-2ubuntu4_amd64.deb ...
Unpacking xdg-user-dirs (0.17-2ubuntu4) ...
Selecting previously unselected package libbrotli-dev:amd64.
Preparing to unpack .../06-libbrotli-dev_1.0.9-2build6_amd64.deb ...
Unpacking libbrotli-dev:amd64 (1.0.9-2build6) ...
Selecting previously unselected package libssl-dev:amd64.
Preparing to unpack .../07-libssl-dev_3.0.2-0ubuntu1.19_amd64.deb ...
Unpacking libssl-dev:amd64 (3.0.2-0ubuntu1.19) ...
Selecting previously unselected package libzstd-dev:amd64.
Preparing to unpack .../08-libzstd-dev_1.4.8+dfsg-3build1_amd64.deb ...
Unpacking libzstd-dev:amd64 (1.4.8+dfsg-3build1) ...
Selecting previously unselected package pkg-config.
Preparing to unpack .../09-pkg-config_0.29.2-1ubuntu3_amd64.deb ...
Unpacking pkg-config (0.29.2-1ubuntu3) ...
Selecting previously unselected package zlib1g-dev:amd64.
Preparing to unpack .../10-zlib1g-dev_1%3a1.2.11.dfsg-2ubuntu9.2_amd64.deb ...
Unpacking zlib1g-dev:amd64 (1:1.2.11.dfsg-2ubuntu9.2) ...
Setting up libzstd-dev:amd64 (1.4.8+dfsg-3build1) ...
Setting up xdg-user-dirs (0.17-2ubuntu4) ...
Setting up libglib2.0-0:amd64 (2.72.4-0ubuntu2.6) ...
No schema files found: doing nothing.
Setting up libglib2.0-data (2.72.4-0ubuntu2.6) ...
Setting up libssl-dev:amd64 (3.0.2-0ubuntu1.19) ...
Setting up pkg-config (0.29.2-1ubuntu3) ...
Setting up zlib1g-dev:amd64 (1:1.2.11.dfsg-2ubuntu9.2) ...
Setting up libbrotli-dev:amd64 (1.0.9-2build6) ...
Setting up libicu70:amd64 (70.1-2) ...
Setting up libxml2:amd64 (2.9.13+dfsg-1ubuntu0.9) ...
Setting up shared-mime-info (2.1-2) ...
Processing triggers for libc-bin (2.35-0ubuntu3.10) ...
bash: ./buildconf: No such file or directory
↓ 59 lines
compile-bench> mkdir -p /home/peter/result && tar -xzf /home/peter/curl.tar.gz -C /home/peter && cd /home/peter/curl-* && sudo apt-get update && sudo DEBIAN_FRONTEND=noninteractive apt-get install -y build-essential pkg-config libssl-dev libbrotli-dev libz-dev libzstd-dev && ./buildconf && ./configure --prefix=/home/peter/result --with-ssl --with-brotli --with-zlib --with-zstd && make && make install && ln -sf /home/peter/result/bin/curl /home/peter/result/curl
0% [Working]
Hit:1 http://archive.ubuntu.com/ubuntu jammy InRelease
0% [Waiting for headers] [Connecting to security.ubuntu.com (185.125.190.83)]
Get:2 http://archive.ubuntu.com/ubuntu jammy-updates InRelease [128 kB]
0% [2 InRelease 5484 B/128 kB 4%] [Connecting to security.ubuntu.com (185.125.1
0% [2 InRelease 35.9 kB/128 kB 28%] [Waiting for headers]
0% [Waiting for headers]
Get:3 http://archive.ubuntu.com/ubuntu jammy-backports InRelease [127 kB]
0% [3 InRelease 6932 B/127 kB 5%] [Waiting for headers]
0% [Waiting for headers]
0% [Waiting for headers]
Get:4 http://security.ubuntu.com/ubuntu jammy-security InRelease [129 kB]
0% [4 InRelease 14.2 kB/129 kB 11%]
Get:5 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 Packages [3626 kB]
0% [5 Packages 6999 B/3626 kB 0%] [4 InRelease 14.2 kB/129 kB 11%]
0% [5 Packages 214 kB/3626 kB 6%] [4 InRelease 14.2 kB/129 kB 11%]
0% [4 InRelease 37.3 kB/129 kB 29%]
0% [5 Packages store 0 B] [4 InRelease 37.3 kB/129 kB 29%]
Get:6 http://archive.ubuntu.com/ubuntu jammy-updates/universe amd64 Packages [1581 kB]
0% [5 Packages store 0 B] [6 Packages 15.7 kB/1581 kB 1%] [4 InRelease 43.1 kB/
0% [5 Packages store 0 B] [4 InRelease 43.1 kB/129 kB 33%]
0% [4 InRelease 75.0 kB/129 kB 58%]
0% [6 Packages store 0 B] [4 InRelease 75.0 kB/129 kB 58%]
0% [4 InRelease 101 kB/129 kB 78%]
0% [Working]
46% [Working]
Get:7 http://security.ubuntu.com/ubuntu jammy-security/main amd64 Packages [3311 kB]
46% [7 Packages 2655 B/3311 kB 0%]
63% [Working]
63% [7 Packages store 0 B]
Get:8 http://security.ubuntu.com/ubuntu jammy-security/multiverse amd64 Packages [80.3 kB]
63% [7 Packages store 0 B] [8 Packages 49.0 kB/80.3 kB 61%]
64% [7 Packages store 0 B] [Waiting for headers]
Get:9 http://security.ubuntu.com/ubuntu jammy-security/universe amd64 Packages [1274 kB]
64% [7 Packages store 0 B] [9 Packages 17.9 kB/1274 kB 1%]
65% [9 Packages 197 kB/1274 kB 15%]
65% [8 Packages store 0 B] [9 Packages 197 kB/1274 kB 15%]
[command output truncated]
ng database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 10711 files and directories currently installed.)
Preparing to unpack .../00-libglib2.0-0_2.72.4-0ubuntu2.6_amd64.deb ...
Unpacking libglib2.0-0:amd64 (2.72.4-0ubuntu2.6) ...
Selecting previously unselected package libglib2.0-data.
Preparing to unpack .../01-libglib2.0-data_2.72.4-0ubuntu2.6_all.deb ...
Unpacking libglib2.0-data (2.72.4-0ubuntu2.6) ...
Selecting previously unselected package libicu70:amd64.
Preparing to unpack .../02-libicu70_70.1-2_amd64.deb ...
Unpacking libicu70:amd64 (70.1-2) ...
Selecting previously unselected package libxml2:amd64.
Preparing to unpack .../03-libxml2_2.9.13+dfsg-1ubuntu0.9_amd64.deb ...
Unpacking libxml2:amd64 (2.9.13+dfsg-1ubuntu0.9) ...
Selecting previously unselected package shared-mime-info.
Preparing to unpack .../04-shared-mime-info_2.1-2_amd64.deb ...
Unpacking shared-mime-info (2.1-2) ...
Selecting previously unselected package xdg-user-dirs.
Preparing to unpack .../05-xdg-user-dirs_0.17-2ubuntu4_amd64.deb ...
Unpacking xdg-user-dirs (0.17-2ubuntu4) ...
Selecting previously unselected package libbrotli-dev:amd64.
Preparing to unpack .../06-libbrotli-dev_1.0.9-2build6_amd64.deb ...
Unpacking libbrotli-dev:amd64 (1.0.9-2build6) ...
Selecting previously unselected package libssl-dev:amd64.
Preparing to unpack .../07-libssl-dev_3.0.2-0ubuntu1.19_amd64.deb ...
Unpacking libssl-dev:amd64 (3.0.2-0ubuntu1.19) ...
Selecting previously unselected package libzstd-dev:amd64.
Preparing to unpack .../08-libzstd-dev_1.4.8+dfsg-3build1_amd64.deb ...
Unpacking libzstd-dev:amd64 (1.4.8+dfsg-3build1) ...
Selecting previously unselected package pkg-config.
Preparing to unpack .../09-pkg-config_0.29.2-1ubuntu3_amd64.deb ...
Unpacking pkg-config (0.29.2-1ubuntu3) ...
Selecting previously unselected package zlib1g-dev:amd64.
Preparing to unpack .../10-zlib1g-dev_1%3a1.2.11.dfsg-2ubuntu9.2_amd64.deb ...
Unpacking zlib1g-dev:amd64 (1:1.2.11.dfsg-2ubuntu9.2) ...
Setting up libzstd-dev:amd64 (1.4.8+dfsg-3build1) ...
Setting up xdg-user-dirs (0.17-2ubuntu4) ...
Setting up libglib2.0-0:amd64 (2.72.4-0ubuntu2.6) ...
No schema files found: doing nothing.
Setting up libglib2.0-data (2.72.4-0ubuntu2.6) ...
Setting up libssl-dev:amd64 (3.0.2-0ubuntu1.19) ...
Setting up pkg-config (0.29.2-1ubuntu3) ...
Setting up zlib1g-dev:amd64 (1:1.2.11.dfsg-2ubuntu9.2) ...
Setting up libbrotli-dev:amd64 (1.0.9-2build6) ...
Setting up libicu70:amd64 (70.1-2) ...
Setting up libxml2:amd64 (2.9.13+dfsg-1ubuntu0.9) ...
Setting up shared-mime-info (2.1-2) ...
Processing triggers for libc-bin (2.35-0ubuntu3.10) ...
bash: ./buildconf: No such file or directory
ASSISTANT
compile-bench> cd /home/peter/curl-* && autoreconf -i && ./configure --prefix=/home/peter/result --with-ssl --with-brotli --with-zlib --with-zstd && make && make install && ln -sf /home/peter/result/bin/curl /home/peter/result/curl
bash: autoreconf: command not found
ASSISTANT
compile-bench> sudo DEBIAN_FRONTEND=noninteractive apt-get install -y autoconf automake libtool && cd /home/peter/curl-* && autoreconf -i && ./configure --prefix=/home/peter/result --with-ssl --with-brotli --with-zlib --with-zstd && make && make install && ln -sf /home/peter/result/bin/curl /home/peter/result/curl
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 3%
Reading package lists... 3%
Reading package lists... 4%
Reading package lists... 4%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 52%
Reading package lists... 52%
Reading package lists... 67%
Reading package lists... 67%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 81%
Reading package lists... 81%
Reading package lists... 96%
Reading package lists... 96%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... Done
Building dependency tree... 0%
Building dependency tree... 0%
Building dependency tree... 50%
Building dependency tree... 50%
Building dependency tree... Done
Reading state information... 0%
Reading state information... 1%
Reading state information... Done
The following additional packages will be installed:
autotools-dev libltdl-dev libltdl7 libsigsegv2 m4
Suggested packages:
autoconf-archive gnu-standards autoconf-doc gettext libtool-doc gfortran
| fortran95-compiler gcj-jdk m4-doc
The following NEW packages will be installed:
autoconf automake autotools-dev libltdl-dev libltdl7 libsigsegv2 libtool m4
0 upgraded, 8 newly installed, 0 to remove and 0 not upgraded.
Need to get 1527 kB of archives.
After this operation, 6858 kB of additional disk space will be used.
0% [Working]
Get:1 http://archive.ubuntu.com/ubuntu jammy/main amd64 libsigsegv2 amd64 2.13-1ubuntu3 [14.6 kB]
1% [1 libsigsegv2 14.2 kB/14.6 kB 97%]
3% [Waiting for headers]
Get:2 http://archive.ubuntu.com/ubuntu jammy/main amd64 m4 amd64 1.4.18-5ubuntu2 [199 kB]
3% [2 m4 2604 B/199 kB 1%]
Get:3 http://archive.ubuntu.com/ubuntu jammy/main amd64 autoconf all 2.71-2 [338 kB]
16% [3 autoconf 404 B/338 kB 0%]
Get:4 http://archive.ubuntu.com/ubuntu jammy/main amd64 autotools-dev all 20220109.1 [44.9 kB]
37% [4 autotools-dev 15.9 kB/44.9 kB 35%]
Get:5 http://archive.ubuntu.com/ubuntu jammy/main amd64 automake all 1:1.16.5-1.3 [558 kB]
42% [5 automake 5502 B/558 kB 1%]
Get:6 http://archive.ubuntu.com/ubuntu jammy/main amd64 libltdl7 amd64 2.4.6-15build2 [39.6 kB]
74% [6 libltdl7 20.5 kB/39.6 kB 52%]
78% [Waiting for headers]
Get:7 http://archive.ubuntu.com/ubuntu jammy/main amd64 libltdl-dev amd64 2
[command output truncated]
ibrary is required... no
checking for gethostbyname... yes
checking whether build target is a native Windows one... (cached) no
checking for proto/bsdsocket.h... no
checking for connect in libraries... yes
checking for sys/types.h... (cached) yes
checking for monotonic clock_gettime... yes
checking for clock_gettime in libraries... no additional lib required
checking if monotonic clock_gettime works... yes
checking for sys/types.h... (cached) yes
checking for raw monotonic clock_gettime... yes
checking for pkg-config... /usr/bin/pkg-config
checking for zlib options with pkg-config... found
checking for zlib.h... yes
configure: found both libz and libz.h header
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libbrotlidec options with pkg-config... found
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libbrotlicommon options with pkg-config... found
checking for BrotliDecoderDecompress in -lbrotlidec... yes
checking for brotli/decode.h... yes
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libzstd options with pkg-config... found
checking for ZSTD_createDStream in -lzstd... yes
checking for zstd.h... yes
checking whether to enable IPv6... yes
checking if struct sockaddr_in6 has sin6_scope_id member... yes
checking if argv can be written to... yes
checking if GSS-API support is requested... no
checking whether to enable Windows native SSL/TLS... no
checking whether to enable Amiga native SSL/TLS (AmiSSL v5)... no
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for openssl options with pkg-config... found
configure: pkg-config: SSL_LIBS: "-lssl -lcrypto"
configure: pkg-config: SSL_LDFLAGS: ""
configure: pkg-config: SSL_CPPFLAGS: ""
checking for HMAC_Update in -lcrypto... yes
checking for SSL_connect in -lssl... yes
checking for openssl/x509.h... yes
checking for openssl/rsa.h... yes
checking for openssl/crypto.h... yes
checking for openssl/pem.h... yes
checking for openssl/ssl.h... yes
checking for openssl/err.h... yes
checking for BoringSSL... no
checking for AWS-LC... no
checking for LibreSSL... no
checking for OpenSSL >= v3... yes
checking for SSL_set_quic_use_legacy_codepoint... no
checking for SSL_set_quic_tls_cbs... no
configure: OpenSSL version does not speak any known QUIC API
checking for SRP support in OpenSSL... yes
checking for QUIC support and OpenSSL >= 3.3... no
configure: built with one SSL backend
checking default CA cert bundle/path... configure: want unset ca /etc/ssl/certs/ca-certificates.crt
/etc/ssl/certs/ca-certificates.crt
/etc/ssl/certs (capath)
checking whether to use OpenSSL's built-in CA store... no
checking CA cert bundle path to embed in the curl tool... no
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libpsl options with pkg-config... no
checking for psl_builtin in -lpsl... no
configure: error: libpsl libs and/or directories were not found where specified!
↓ 85 lines
compile-bench> sudo DEBIAN_FRONTEND=noninteractive apt-get install -y autoconf automake libtool && cd /home/peter/curl-* && autoreconf -i && ./configure --prefix=/home/peter/result --with-ssl --with-brotli --with-zlib --with-zstd && make && make install && ln -sf /home/peter/result/bin/curl /home/peter/result/curl
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 3%
Reading package lists... 3%
Reading package lists... 4%
Reading package lists... 4%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 52%
Reading package lists... 52%
Reading package lists... 67%
Reading package lists... 67%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 81%
Reading package lists... 81%
Reading package lists... 96%
Reading package lists... 96%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... Done
Building dependency tree... 0%
Building dependency tree... 0%
Building dependency tree... 50%
Building dependency tree... 50%
Building dependency tree... Done
Reading state information... 0%
Reading state information... 1%
Reading state information... Done
The following additional packages will be installed:
autotools-dev libltdl-dev libltdl7 libsigsegv2 m4
Suggested packages:
autoconf-archive gnu-standards autoconf-doc gettext libtool-doc gfortran
| fortran95-compiler gcj-jdk m4-doc
The following NEW packages will be installed:
autoconf automake autotools-dev libltdl-dev libltdl7 libsigsegv2 libtool m4
0 upgraded, 8 newly installed, 0 to remove and 0 not upgraded.
Need to get 1527 kB of archives.
After this operation, 6858 kB of additional disk space will be used.
0% [Working]
Get:1 http://archive.ubuntu.com/ubuntu jammy/main amd64 libsigsegv2 amd64 2.13-1ubuntu3 [14.6 kB]
1% [1 libsigsegv2 14.2 kB/14.6 kB 97%]
3% [Waiting for headers]
Get:2 http://archive.ubuntu.com/ubuntu jammy/main amd64 m4 amd64 1.4.18-5ubuntu2 [199 kB]
3% [2 m4 2604 B/199 kB 1%]
Get:3 http://archive.ubuntu.com/ubuntu jammy/main amd64 autoconf all 2.71-2 [338 kB]
16% [3 autoconf 404 B/338 kB 0%]
Get:4 http://archive.ubuntu.com/ubuntu jammy/main amd64 autotools-dev all 20220109.1 [44.9 kB]
37% [4 autotools-dev 15.9 kB/44.9 kB 35%]
Get:5 http://archive.ubuntu.com/ubuntu jammy/main amd64 automake all 1:1.16.5-1.3 [558 kB]
42% [5 automake 5502 B/558 kB 1%]
Get:6 http://archive.ubuntu.com/ubuntu jammy/main amd64 libltdl7 amd64 2.4.6-15build2 [39.6 kB]
74% [6 libltdl7 20.5 kB/39.6 kB 52%]
78% [Waiting for headers]
Get:7 http://archive.ubuntu.com/ubuntu jammy/main amd64 libltdl-dev amd64 2
[command output truncated]
ibrary is required... no
checking for gethostbyname... yes
checking whether build target is a native Windows one... (cached) no
checking for proto/bsdsocket.h... no
checking for connect in libraries... yes
checking for sys/types.h... (cached) yes
checking for monotonic clock_gettime... yes
checking for clock_gettime in libraries... no additional lib required
checking if monotonic clock_gettime works... yes
checking for sys/types.h... (cached) yes
checking for raw monotonic clock_gettime... yes
checking for pkg-config... /usr/bin/pkg-config
checking for zlib options with pkg-config... found
checking for zlib.h... yes
configure: found both libz and libz.h header
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libbrotlidec options with pkg-config... found
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libbrotlicommon options with pkg-config... found
checking for BrotliDecoderDecompress in -lbrotlidec... yes
checking for brotli/decode.h... yes
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libzstd options with pkg-config... found
checking for ZSTD_createDStream in -lzstd... yes
checking for zstd.h... yes
checking whether to enable IPv6... yes
checking if struct sockaddr_in6 has sin6_scope_id member... yes
checking if argv can be written to... yes
checking if GSS-API support is requested... no
checking whether to enable Windows native SSL/TLS... no
checking whether to enable Amiga native SSL/TLS (AmiSSL v5)... no
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for openssl options with pkg-config... found
configure: pkg-config: SSL_LIBS: "-lssl -lcrypto"
configure: pkg-config: SSL_LDFLAGS: ""
configure: pkg-config: SSL_CPPFLAGS: ""
checking for HMAC_Update in -lcrypto... yes
checking for SSL_connect in -lssl... yes
checking for openssl/x509.h... yes
checking for openssl/rsa.h... yes
checking for openssl/crypto.h... yes
checking for openssl/pem.h... yes
checking for openssl/ssl.h... yes
checking for openssl/err.h... yes
checking for BoringSSL... no
checking for AWS-LC... no
checking for LibreSSL... no
checking for OpenSSL >= v3... yes
checking for SSL_set_quic_use_legacy_codepoint... no
checking for SSL_set_quic_tls_cbs... no
configure: OpenSSL version does not speak any known QUIC API
checking for SRP support in OpenSSL... yes
checking for QUIC support and OpenSSL >= 3.3... no
configure: built with one SSL backend
checking default CA cert bundle/path... configure: want unset ca /etc/ssl/certs/ca-certificates.crt
/etc/ssl/certs/ca-certificates.crt
/etc/ssl/certs (capath)
checking whether to use OpenSSL's built-in CA store... no
checking CA cert bundle path to embed in the curl tool... no
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libpsl options with pkg-config... no
checking for psl_builtin in -lpsl... no
configure: error: libpsl libs and/or directories were not found where specified!
ASSISTANT
compile-bench> sudo DEBIAN_FRONTEND=noninteractive apt-get install -y libpsl-dev && cd /home/peter/curl-* && autoreconf -i && ./configure --prefix=/home/peter/result --with-ssl --with-brotli --with-zlib --with-zstd && make && make install && ln -sf /home/peter/result/bin/curl /home/peter/result/curl
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 3%
Reading package lists... 3%
Reading package lists... 4%
Reading package lists... 4%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 52%
Reading package lists... 52%
Reading package lists... 67%
Reading package lists... 67%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 81%
Reading package lists... 81%
Reading package lists... 96%
Reading package lists... 96%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... Done
Building dependency tree... 0%
Building dependency tree... 0%
Building dependency tree... 50%
Building dependency tree... 50%
Building dependency tree... Done
Reading state information... 0%
Reading state information... 1%
Reading state information... Done
The following NEW packages will be installed:
libpsl-dev
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 77.9 kB of archives.
After this operation, 214 kB of additional disk space will be used.
0% [Working]
Get:1 http://archive.ubuntu.com/ubuntu jammy/main amd64 libpsl-dev amd64 0.21.0-1.2build2 [77.9 kB]
15% [1 libpsl-dev 14.2 kB/77.9 kB 18%]
100% [Working]
Fetched 77.9 kB in 0s (178 kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package libpsl-dev:amd64.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 11669 files and directories currently installed.)
Preparing to unpack .../libpsl-dev_0.21.0-1.2build2_amd64.deb ...
Unpacking libpsl-dev:amd64 (0.21.0-1.2build2) ...
Setting up libpsl-dev:amd64 (0.21.0-1.2build2) ...
libtoolize: error: './ltmain.sh' is newer: use '--force' to overwrite
libtoolize: error: 'm4/libtool.m4' is newer: use '--force' to overwrite
libtoolize: error: 'm4/ltversion.m4' is newer: use '--force' to overwrite
libtoolize: Remember to add 'LT_INIT' to configure.ac.
checking whether to enable maintainer-specific portions of Makefiles... no
[command output truncated]
ng directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/home/peter/result/share/aclocal'
/usr/bin/install -c -m 644 libcurl.m4 '/home/peter/result/share/aclocal'
/usr/bin/mkdir -p '/home/peter/result/share/man/man3'
/usr/bin/install -c -m 644 curl_easy_cleanup.3 curl_easy_duphandle.3 curl_easy_escape.3 curl_easy_getinfo.3 curl_easy_header.3 curl_easy_init.3 curl_easy_nextheader.3 curl_easy_option_by_id.3 curl_easy_option_by_name.3 curl_easy_option_next.3 curl_easy_pause.3 curl_easy_perform.3 curl_easy_recv.3 curl_easy_reset.3 curl_easy_send.3 curl_easy_setopt.3 curl_easy_ssls_export.3 curl_easy_ssls_import.3 curl_easy_strerror.3 curl_easy_unescape.3 curl_easy_upkeep.3 curl_escape.3 curl_formadd.3 curl_formfree.3 curl_formget.3 curl_free.3 curl_getdate.3 curl_getenv.3 curl_global_cleanup.3 curl_global_init.3 curl_global_init_mem.3 curl_global_sslset.3 curl_global_trace.3 curl_mime_addpart.3 curl_mime_data.3 curl_mime_data_cb.3 curl_mime_encoder.3 curl_mime_filedata.3 curl_mime_filename.3 curl_mime_free.3 '/home/peter/result/share/man/man3'
/usr/bin/install -c -m 644 curl_mime_headers.3 curl_mime_init.3 curl_mime_name.3 curl_mime_subparts.3 curl_mime_type.3 curl_mprintf.3 curl_multi_add_handle.3 curl_multi_assign.3 curl_multi_cleanup.3 curl_multi_fdset.3 curl_multi_get_handles.3 curl_multi_get_offt.3 curl_multi_info_read.3 curl_multi_init.3 curl_multi_perform.3 curl_multi_poll.3 curl_multi_remove_handle.3 curl_multi_setopt.3 curl_multi_socket.3 curl_multi_socket_action.3 curl_multi_socket_all.3 curl_multi_strerror.3 curl_multi_timeout.3 curl_multi_wait.3 curl_multi_waitfds.3 curl_multi_wakeup.3 curl_pushheader_byname.3 curl_pushheader_bynum.3 curl_share_cleanup.3 curl_share_init.3 curl_share_setopt.3 curl_share_strerror.3 curl_slist_append.3 curl_slist_free_all.3 curl_strequal.3 curl_strnequal.3 curl_unescape.3 curl_url.3 curl_url_cleanup.3 curl_url_dup.3 '/home/peter/result/share/man/man3'
/usr/bin/install -c -m 644 curl_url_get.3 curl_url_set.3 curl_url_strerror.3 curl_version.3 curl_version_info.3 curl_ws_meta.3 curl_ws_recv.3 curl_ws_send.3 curl_ws_start_frame.3 libcurl-easy.3 libcurl-env-dbg.3 libcurl-env.3 libcurl-errors.3 libcurl-multi.3 libcurl-security.3 libcurl-share.3 libcurl-symbols.3 libcurl-thread.3 libcurl-tutorial.3 libcurl-url.3 libcurl-ws.3 libcurl.3 '/home/peter/result/share/man/man3'
make[6]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[4]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[3]: Leaving directory '/home/peter/curl-8.16.0'
make[2]: Leaving directory '/home/peter/curl-8.16.0'
make[1]: Leaving directory '/home/peter/curl-8.16.0'
↓ 40 lines
compile-bench> sudo DEBIAN_FRONTEND=noninteractive apt-get install -y libpsl-dev && cd /home/peter/curl-* && autoreconf -i && ./configure --prefix=/home/peter/result --with-ssl --with-brotli --with-zlib --with-zstd && make && make install && ln -sf /home/peter/result/bin/curl /home/peter/result/curl
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 0%
Reading package lists... 3%
Reading package lists... 3%
Reading package lists... 4%
Reading package lists... 4%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 42%
Reading package lists... 52%
Reading package lists... 52%
Reading package lists... 67%
Reading package lists... 67%
Reading package lists... 71%
Reading package lists... 71%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 72%
Reading package lists... 81%
Reading package lists... 81%
Reading package lists... 96%
Reading package lists... 96%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... 99%
Reading package lists... Done
Building dependency tree... 0%
Building dependency tree... 0%
Building dependency tree... 50%
Building dependency tree... 50%
Building dependency tree... Done
Reading state information... 0%
Reading state information... 1%
Reading state information... Done
The following NEW packages will be installed:
libpsl-dev
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 77.9 kB of archives.
After this operation, 214 kB of additional disk space will be used.
0% [Working]
Get:1 http://archive.ubuntu.com/ubuntu jammy/main amd64 libpsl-dev amd64 0.21.0-1.2build2 [77.9 kB]
15% [1 libpsl-dev 14.2 kB/77.9 kB 18%]
100% [Working]
Fetched 77.9 kB in 0s (178 kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package libpsl-dev:amd64.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 11669 files and directories currently installed.)
Preparing to unpack .../libpsl-dev_0.21.0-1.2build2_amd64.deb ...
Unpacking libpsl-dev:amd64 (0.21.0-1.2build2) ...
Setting up libpsl-dev:amd64 (0.21.0-1.2build2) ...
libtoolize: error: './ltmain.sh' is newer: use '--force' to overwrite
libtoolize: error: 'm4/libtool.m4' is newer: use '--force' to overwrite
libtoolize: error: 'm4/ltversion.m4' is newer: use '--force' to overwrite
libtoolize: Remember to add 'LT_INIT' to configure.ac.
checking whether to enable maintainer-specific portions of Makefiles... no
[command output truncated]
ng directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl/opts'
make[5]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Entering directory '/home/peter/curl-8.16.0/docs/libcurl'
make[6]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/home/peter/result/share/aclocal'
/usr/bin/install -c -m 644 libcurl.m4 '/home/peter/result/share/aclocal'
/usr/bin/mkdir -p '/home/peter/result/share/man/man3'
/usr/bin/install -c -m 644 curl_easy_cleanup.3 curl_easy_duphandle.3 curl_easy_escape.3 curl_easy_getinfo.3 curl_easy_header.3 curl_easy_init.3 curl_easy_nextheader.3 curl_easy_option_by_id.3 curl_easy_option_by_name.3 curl_easy_option_next.3 curl_easy_pause.3 curl_easy_perform.3 curl_easy_recv.3 curl_easy_reset.3 curl_easy_send.3 curl_easy_setopt.3 curl_easy_ssls_export.3 curl_easy_ssls_import.3 curl_easy_strerror.3 curl_easy_unescape.3 curl_easy_upkeep.3 curl_escape.3 curl_formadd.3 curl_formfree.3 curl_formget.3 curl_free.3 curl_getdate.3 curl_getenv.3 curl_global_cleanup.3 curl_global_init.3 curl_global_init_mem.3 curl_global_sslset.3 curl_global_trace.3 curl_mime_addpart.3 curl_mime_data.3 curl_mime_data_cb.3 curl_mime_encoder.3 curl_mime_filedata.3 curl_mime_filename.3 curl_mime_free.3 '/home/peter/result/share/man/man3'
/usr/bin/install -c -m 644 curl_mime_headers.3 curl_mime_init.3 curl_mime_name.3 curl_mime_subparts.3 curl_mime_type.3 curl_mprintf.3 curl_multi_add_handle.3 curl_multi_assign.3 curl_multi_cleanup.3 curl_multi_fdset.3 curl_multi_get_handles.3 curl_multi_get_offt.3 curl_multi_info_read.3 curl_multi_init.3 curl_multi_perform.3 curl_multi_poll.3 curl_multi_remove_handle.3 curl_multi_setopt.3 curl_multi_socket.3 curl_multi_socket_action.3 curl_multi_socket_all.3 curl_multi_strerror.3 curl_multi_timeout.3 curl_multi_wait.3 curl_multi_waitfds.3 curl_multi_wakeup.3 curl_pushheader_byname.3 curl_pushheader_bynum.3 curl_share_cleanup.3 curl_share_init.3 curl_share_setopt.3 curl_share_strerror.3 curl_slist_append.3 curl_slist_free_all.3 curl_strequal.3 curl_strnequal.3 curl_unescape.3 curl_url.3 curl_url_cleanup.3 curl_url_dup.3 '/home/peter/result/share/man/man3'
/usr/bin/install -c -m 644 curl_url_get.3 curl_url_set.3 curl_url_strerror.3 curl_version.3 curl_version_info.3 curl_ws_meta.3 curl_ws_recv.3 curl_ws_send.3 curl_ws_start_frame.3 libcurl-easy.3 libcurl-env-dbg.3 libcurl-env.3 libcurl-errors.3 libcurl-multi.3 libcurl-security.3 libcurl-share.3 libcurl-symbols.3 libcurl-thread.3 libcurl-tutorial.3 libcurl-url.3 libcurl-ws.3 libcurl.3 '/home/peter/result/share/man/man3'
make[6]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[5]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[4]: Leaving directory '/home/peter/curl-8.16.0/docs/libcurl'
make[3]: Leaving directory '/home/peter/curl-8.16.0'
make[2]: Leaving directory '/home/peter/curl-8.16.0'
make[1]: Leaving directory '/home/peter/curl-8.16.0'
ASSISTANT
compile-bench> /home/peter/result/curl --version curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.2 zlib/1.2.11 brotli/1.0.9 zstd/1.4.8 libpsl/0.21.0
Release-Date: 2025-09-10
Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss
Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd
↓ 5 lines
compile-bench> /home/peter/result/curl --version
curl 8.16.0 (x86_64-pc-linux-gnu) libcurl/8.16.0 OpenSSL/3.0.2 zlib/1.2.11 brotli/1.0.9 zstd/1.4.8 libpsl/0.21.0 Release-Date: 2025-09-10 Protocols: dict file ftp ftps gopher gophers http https imap imaps ipfs ipns mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftp ws wss Features: alt-svc AsynchDNS brotli HSTS HTTPS-proxy IPv6 Largefile libz NTLM PSL SSL threadsafe TLS-SRP UnixSockets zstd
ASSISTANT
Curl 8.16.0 was successfully compiled and installed to /home/peter/result with SSL (OpenSSL 3.0.2) support including TLS v1.3, brotli, zlib, and zstd. A symlink named /home/peter/result/curl was created pointing to the actual curl binary. The installed curl version confirms all requested features are enabled.
Task finished successfully, all checks passed!
Checks passed:
curl binary exists
curl version matches expected
curl downloaded the expected local file content
curl HTTPS request to google.com returned content-type: text/html
curl TLSv1.2 connection to google.com used TLSv1.2
curl TLSv1.3 connection to google.com used TLSv1.3
curl brotli compression test passed
curl gzip compression test passed
curl version shows zstd support