<- Ranking
Summary
Task
jq-static-musl
Model
claude-sonnet-4-thinking-16k logo
claude-sonnet-4-thinking-16k
Status
Success
Performance
Cost$0.299
Total elapsed time2m45s
LLM inference time2m26s
Command execution time19s
Commands executed29
All details >
Attempt ID 1lqob8o8fgs5g Attempt group run-16-09-22-05
Revision fb5c74bd2fee AWS Instance m8i.2xlarge
Start time 2025-09-16T22:06:11.280Z End time 2025-09-16T22:08:56.561Z
Task jq-static-musl Environment ubuntu-22.04-amd64
Model claude-sonnet-4-thinking-16k logo claude-sonnet-4-thinking-16k OpenRouter slug anthropic/claude-sonnet-4
Temperature 1 Explicit prompt caching true
User msg after tool call true Max tool calls 100
Total timeout seconds 1200 Single command timeout 600
Cost $0.299 Duration 2m45s
LLM inference time 2m26s Command execution time 19s
Final context tokens 22,250 Total output tokens 6,223
Output reasoning tokens 2,835 Messages 61
Assistant messages 30 User messages 1
System messages 1 Commands executed 29
Download full attempt result JSON
Task
Task: jq-static-musl

jq 1.8.1 is a command-line JSON utility for viewing and transforming JSON.
Project link: github.com/jqlang/jq

Task:
Compile and install statically-linked jq to a specific location. The binary must use musl C library (not the standard glibc).

Difficulties:
musl toolchain setup, avoiding glibc-only assumptions.

Environment:
Ubuntu 22.04 on amd64, with internet access.

View task page
Execution log
SYSTEM

You are a package-building specialist operating a Ubuntu 22.04 bash shell via one tool: run_terminal_cmd.
The current working directory of every run_terminal_cmd is /home/peter.
Execution rules:
- Always pass non-interactive flags for any command that could prompt (e.g., -y, --yes, DEBIAN_FRONTEND=noninteractive).
- Don't include any newlines in the command.
- You can use sudo.
If you encounter any errors or issues while doing the user's request, you must fix them and continue the task.
At the end verify you did the user request correctly.

USER

You are given jq v1.8.1 source code at /home/peter/jq.tar.gz. Please compile the jq package using musl as the C standard library and install it to /home/peter/result. Create a symlink from /home/peter/result/jq to the compiled jq binary. The binary must be statically linked and must use musl (not glibc).

ASSISTANT
Show reasoning

I need to:
1. Extract the jq source code from the tar.gz file
2. Compile jq using musl as the C standard library (not glibc)
3. Make sure it's statically linked
4. Install it to /home/peter/result
5. Create a symlink from /home/peter/result/jq to the compiled binary

Let me start by examining what we have and then proceed step by step.

First, I should check what's available and extract the source code.

I'll help you compile jq v1.8.1 using musl as the C standard library and create a statically linked binary. Let me start by examining the source code and setting up the build environment.

compile-bench> ls -la /home/peter/jq.tar.gz
-rw-r--r-- 1 peter peter 2026798 Sep 16 22:06 /home/peter/jq.tar.gz
ASSISTANT
Show reasoning

The user wants me to compile jq v1.8.1 using musl as the C standard library. Let me break this down:

1. First, I need to extract the source code from the tar.gz file
2. Install musl-dev and necessary build tools
3. Configure the build to use musl instead of glibc
4. Compile jq statically linked with musl
5. Install it to /home/peter/result
6. Create a symlink from /home/peter/result/jq to the compiled binary

Let me start by extracting the source code and examining what we have.

Let me extract the source code and set up the build environment with musl.

compile-bench> cd /home/peter && tar -xzf jq.tar.gz
[empty output]
ASSISTANT
Show reasoning

The user wants me to compile jq v1.8.1 using musl as the C standard library and install it to /home/peter/result. The binary must be statically linked and use musl (not glibc). I need to:

1. Extract the source code (done)
2. Check what was extracted
3. Install musl-dev and other build dependencies
4. Configure the build to use musl and static linking
5. Compile jq
6. Install it to /home/peter/result
7. Create a symlink from /home/peter/result/jq to the compiled binary
8. Verify it's statically linked and uses musl

Let me continue step by step.

compile-bench> cd /home/peter && ls -la
total 2008
drwxr-x--- 1 peter peter    4096 Sep 16 22:06 .
drwxr-xr-x 1 root  root     4096 Sep 15 11:21 ..
-rw-r--r-- 1 peter peter     220 Jan  6  2022 .bash_logout
-rw-r--r-- 1 peter peter    3771 Jan  6  2022 .bashrc
-rw-r--r-- 1 peter peter     807 Jan  6  2022 .profile
drwxr-xr-x 9 peter peter    4096 Jul  1 11:40 jq-1.8.1
-rw-r--r-- 1 peter peter 2026798 Sep 16 22:06 jq.tar.gz
↓ 9 lines
ASSISTANT
Show reasoning

Good, the source code has been extracted to jq-1.8.1 directory. Now I need to:

1. Install musl-dev and musl-gcc to compile with musl
2. Install build dependencies for jq
3. Configure and compile jq with musl as the C library, creating a statically linked binary
4. Install to /home/peter/result
5. Create a symlink from /home/peter/result/jq to the compiled binary

Let me start by installing the necessary packages.

compile-bench> cd /home/peter/jq-1.8.1 && ls -la
total 1184
drwxr-xr-x 9 peter peter   4096 Jul  1 11:40 .
drwxr-x--- 1 peter peter   4096 Sep 16 22:06 ..
-rw-r--r-- 1 peter peter  10686 Jul  1 11:39 AUTHORS
-rw-r--r-- 1 peter peter   7887 Jul  1 11:39 COPYING
-rw-r--r-- 1 peter peter  33286 Jul  1 11:39 ChangeLog
-rw-r--r-- 1 peter peter   9090 Jul  1 11:39 Makefile.am
-rw-r--r-- 1 peter peter  75461 Jul  1 11:39 Makefile.in
-rw-r--r-- 1 peter peter  24670 Jul  1 11:39 NEWS.md
-rw-r--r-- 1 peter peter   2434 Jul  1 11:39 README.md
-rw-r--r-- 1 peter peter  46459 Jul  1 11:39 aclocal.m4
drwxr-xr-x 3 peter peter   4096 Jul  1 11:40 config
-rwxr-xr-x 1 peter peter 665647 Jul  1 11:39 configure
-rw-r--r-- 1 peter peter   9881 Jul  1 11:39 configure.ac
drwxr-xr-x 5 peter peter   4096 Jul  1 11:40 docs
-rw-r--r-- 1 peter peter 124253 Jul  1 11:39 jq.1
-rw-r--r-- 1 peter peter 124253 Jul  1 11:39 jq.1.prebuilt
-rw-r--r-- 1 peter peter   1431 Jul  1 11:39 jq.spec
-rw-r--r-- 1 peter peter    255 Jul  1 11:39 libjq.pc
-rw-r--r-- 1 peter peter    246 Jul  1 11:39 libjq.pc.in
drwxr-xr-x 2 peter peter   4096 Jul  1 11:40 m4
drwxr-xr-x 2 peter peter   4096 Jul  1 11:40 scripts
drwxr-xr-x 2 peter peter   4096 Jul  1 11:40 src
drwxr-xr-x 4 peter peter   4096 Jul  1 11:40 tests
drwxr-xr-x 4 peter peter   4096 Jul  1 11:40 vendor
↓ 26 lines
ASSISTANT
Show reasoning

I need to compile jq with musl as the C standard library and make a statically linked binary. Let me break this down:

1. First, I need to install musl and musl-dev tools
2. Then I need to configure the build to use musl-gcc instead of regular gcc
3. Configure for static linking
4. Build and install to /home/peter/result
5. Create the symlink

Let me start by installing the necessary packages.

Now I'll install musl and the necessary build tools to compile jq with musl as a statically linked binary.

compile-bench> sudo apt update -y
0% [Working]
            
Hit:1 http://archive.ubuntu.com/ubuntu jammy InRelease

0% [Waiting for headers] [Connecting to security.ubuntu.com (185.125.190.36)]
                                                                             
Get:2 http://archive.ubuntu.com/ubuntu jammy-updates InRelease [128 kB]

0% [2 InRelease 12.7 kB/128 kB 10%] [Connecting to security.ubuntu.com (185.125
                                                                               
0% [2 InRelease 47.5 kB/128 kB 37%] [Waiting for headers]
                                                         
0% [Waiting for headers]
                        
Get:3 http://archive.ubuntu.com/ubuntu jammy-backports InRelease [127 kB]

0% [3 InRelease 14.2 kB/127 kB 11%] [Waiting for headers]
                                                         
0% [Waiting for headers]
0% [Waiting for headers]
                        
Get:4 http://security.ubuntu.com/ubuntu jammy-security InRelease [129 kB]

0% [Waiting for headers] [4 InRelease 14.2 kB/129 kB 11%]
                                                         
Get:5 http://archive.ubuntu.com/ubuntu jammy-updates/restricted amd64 Packages [5665 kB]

0% [5 Packages 6999 B/5665 kB 0%] [4 InRelease 14.2 kB/129 kB 11%]
0% [5 Packages 223 kB/5665 kB 4%] [4 InRelease 14.2 kB/129 kB 11%]
                                                                  
0% [4 InRelease 43.1 kB/129 kB 33%]
0% [5 Packages store 0 B] [Waiting for headers] [4 InRelease 43.1 kB/129 kB 33%
                                                                               
Get:6 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 Packages [3638 kB]

0% [5 Packages store 0 B] [6 Packages 42.6 kB/3638 kB 1%] [4 InRelease 43.1 kB/
0% [5 Packages store 0 B] [Waiting for headers] [4 InRelease 46.0 kB/129 kB 36%
                                                                               
Get:7 http://archive.ubuntu.com/ubuntu jammy-updates/universe amd64 Packages [1581 kB]

0% [5 Packages store 0 B] [7 Packages 69.6 kB/1581 kB 4%] [4 InRelease 46.0 kB/
                                                                               
0% [5 Packages store 0 B] [4 InRelease 51.8 kB/129 kB 40%]
                                                          
0% [5 Packages store 0 B]
                         
0% [Working]
0% [6 Packages store 0 B]
59% [6 Packages store 0 B]
                          
59% [Waiting for headers]
59% [7 Packages store 0 B] [Waiting for headers]
                                                
Get:8 http://security.ubuntu.com/ubuntu jammy-security/main amd64 Packages [3311 kB]

59% [7 Packages store 0 B] [8 Packages 2655 B/3311 kB 0%]
                                                         
60% [8 Packages 62.0 kB/3311 kB 2%]
                                   
72% [Working]
72% [8 Packages store 0 B]
                          
Get:9 http://security.ubuntu.com/ubuntu jammy-security/multiverse amd64 Packages [80.3 kB]

72% [8 Packages store 0 B] [9 Packages 24.4 kB/80.3 kB 30%]
                                                           
73% [8 Packages store 0 B] [Waiting for headers]
                                                
Get:10 http://security.ubuntu.com/ubuntu jammy-security/universe amd64 Packages [1274 kB]

73% [8 Packages store 0 B] [10 Packages 17.9 kB/1274 kB 1%]
                                                           
74% [10 Packages 187 kB/1274 kB 15%]
74% [9 Packages store 0 B] [10 Packages 187 kB/1274 kB 15%]
                                                           
74% [10 Packages 187 kB/1274 kB 15%]
                                    
79% [Waiting for headers]
                         
Get:11 http://security.ubuntu.com/ubuntu jammy-security/restricted amd64 Packages [5441 kB]

79% [11 Packages 37.6 kB/5441 kB 1%]
79% [10 Packages store 0 B] [11 Packages 49.2 kB/5441 kB 1%]
                                                            
80% [11 Packages 179 kB/5441 kB 3%]
                                   
99% [Working]
99% [11 Packages store 0 B]
                           
100% [Working]
              
Fetched 21.4 MB in 2s (11.4 MB/s)

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 3%

Reading package lists... 3%

Reading package lists... 4%

Reading package lists... 4%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 52%

Reading package lists... 52%

Reading package lists... 67%

Reading package lists... 67%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 81%

Reading package lists... 81%

Reading package lists... 96%

Reading package lists... 96%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... Done


Building dependency tree... 0%

Building dependency tree... 0%

Building dependency tree... 0%

Building dependency tree... 50%

Building dependency tree... 50%

Building dependency tree... Done


Reading state information... 0% 

Reading state information... 1%

Reading state information... Done

All packages are up to date.
↓ 17 lines
ASSISTANT
Show reasoning

The user wants me to compile jq v1.8.1 using musl as the C standard library and install it to /home/peter/result. I need to:

1. Install musl and build tools
2. Configure the build to use musl-gcc for static linking
3. Build jq
4. Install it to /home/peter/result
5. Create a symlink from /home/peter/result/jq to the compiled binary

Let me continue with installing the necessary packages.

compile-bench> sudo apt install -y musl-tools musl-dev build-essential autotools-dev libtool autoconf
Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 0%

Reading package lists... 3%

Reading package lists... 3%

Reading package lists... 4%

Reading package lists... 4%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 42%

Reading package lists... 52%

Reading package lists... 52%

Reading package lists... 67%

Reading package lists... 67%

Reading package lists... 71%

Reading package lists... 71%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 72%

Reading package lists... 81%

Reading package lists... 81%

Reading package lists... 96%

Reading package lists... 96%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... 99%

Reading package lists... Done


Building dependency tree... 0%

Building dependency tree... 0%

Building dependency tree... 50%

Building dependency tree... 50%

Building dependency tree... 62%

Building dependency tree... Done


Reading state information... 0% 

Reading state information... 1%

Reading state information... Done

build-essential is already the newest version (12.9ubuntu3).
The following additional packages will be installed:
  automake libltdl-dev libltdl7 libsigsegv2 m4 musl
Suggested packages:
  autoconf-archive gnu-standards autoconf-doc gettext libtool-doc gfortran
  | fortran95-compiler gcj-jdk m4-doc
Recommended packages:
  linux-musl-dev
The following NEW packages will be installed:
  autoconf automake autotools-dev libltdl-dev libltdl7 libsigsegv2 libtool m4
  musl musl-dev musl-tools
0 upgraded, 11 newly installed, 0 to remove and 0 not upgraded.
Need to get 2545 kB of archives.
After this operation, 11.0 MB of additional disk space will be used.

0% [Working]
            
Get:1 http://archive.ubuntu.com/ubuntu jammy/main amd64 libsigsegv2 amd64 2.13-1ubuntu3 [14.6 kB]

0% [1 libsigsegv2 14.2 kB/14.6 kB 97%]
                                      
2% [Working]
            
Get:2 http://archive.ubuntu.com/ubuntu jammy/main amd64 m4 amd64 1.4.18-5ubuntu2 [199 kB]

2% [2 m4 2604 B/199 kB 1%]
                          
10% [Waiting for headers]
                         
Get:3 http://archive.ubuntu.com/ubuntu jammy/main amd64 autoconf all 2.71-2 [338 kB]

10% [3 autoconf 404 B/338 kB 0%]
                                
23% [Waiting for headers]
                         
Get:4 http://archive.ubuntu.com/ubuntu jammy/main amd64 autotools-dev all 20220109.1 [44.9 kB]

23% [4 autotools-dev 358 B/44.9 kB 1%]
                                      
26% [Waiting for headers]
                         
Get:5 http://archive.ubuntu.com/ubuntu jammy/main amd64 automake all 1:1.16.5-1.3 [558 kB]

26% [5 automake 9598 B/558 kB 2%]
                                 
45% [Waiting for headers]
                        
[command output truncated]
ase ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 10711 files and directories currently installed.)
Preparing to unpack .../00-libsigsegv2_2.13-1ubuntu3_amd64.deb ...
Unpacking libsigsegv2:amd64 (2.13-1ubuntu3) ...
Selecting previously unselected package m4.
Preparing to unpack .../01-m4_1.4.18-5ubuntu2_amd64.deb ...
Unpacking m4 (1.4.18-5ubuntu2) ...
Selecting previously unselected package autoconf.
Preparing to unpack .../02-autoconf_2.71-2_all.deb ...
Unpacking autoconf (2.71-2) ...
Selecting previously unselected package autotools-dev.
Preparing to unpack .../03-autotools-dev_20220109.1_all.deb ...
Unpacking autotools-dev (20220109.1) ...
Selecting previously unselected package automake.
Preparing to unpack .../04-automake_1%3a1.16.5-1.3_all.deb ...
Unpacking automake (1:1.16.5-1.3) ...
Selecting previously unselected package libltdl7:amd64.
Preparing to unpack .../05-libltdl7_2.4.6-15build2_amd64.deb ...
Unpacking libltdl7:amd64 (2.4.6-15build2) ...
Selecting previously unselected package libltdl-dev:amd64.
Preparing to unpack .../06-libltdl-dev_2.4.6-15build2_amd64.deb ...
Unpacking libltdl-dev:amd64 (2.4.6-15build2) ...
Selecting previously unselected package libtool.
Preparing to unpack .../07-libtool_2.4.6-15build2_all.deb ...
Unpacking libtool (2.4.6-15build2) ...
Selecting previously unselected package musl:amd64.
Preparing to unpack .../08-musl_1.2.2-4_amd64.deb ...
Unpacking musl:amd64 (1.2.2-4) ...
Selecting previously unselected package musl-dev:amd64.
Preparing to unpack .../09-musl-dev_1.2.2-4_amd64.deb ...
Unpacking musl-dev:amd64 (1.2.2-4) ...
Selecting previously unselected package musl-tools.
Preparing to unpack .../10-musl-tools_1.2.2-4_amd64.deb ...
Unpacking musl-tools (1.2.2-4) ...
Setting up autotools-dev (20220109.1) ...
Setting up libsigsegv2:amd64 (2.13-1ubuntu3) ...
Setting up libltdl7:amd64 (2.4.6-15build2) ...
Setting up musl:amd64 (1.2.2-4) ...
Setting up libtool (2.4.6-15build2) ...
Setting up m4 (1.4.18-5ubuntu2) ...
Setting up musl-dev:amd64 (1.2.2-4) ...
Setting up autoconf (2.71-2) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/automake.1.gz because associated file /usr/share/man/man1/automake-1.16.1.gz (of link group automake) doesn't exist
update-alternatives: warning: skip creation of /usr/share/man/man1/aclocal.1.gz because associated file /usr/share/man/man1/aclocal-1.16.1.gz (of link group automake) doesn't exist
Setting up libltdl-dev:amd64 (2.4.6-15build2) ...
Setting up musl-tools (1.2.2-4) ...
Processing triggers for libc-bin (2.35-0ubuntu3.10) ...
↓ 73 lines
ASSISTANT
Show reasoning

Now I need to compile jq with musl. I need to:

1. First check what's in the jq source directory to understand the build system
2. Configure the build to use musl-gcc and static linking
3. Build and install to /home/peter/result
4. Create the symlink

Let me first check if the configure script is ready to use or if I need to run autoreconf first.

Now I'll create the result directory and configure jq to build with musl and static linking:

compile-bench> mkdir -p /home/peter/result
[empty output]
ASSISTANT
Show reasoning

The user wants me to compile jq with musl as the C standard library and create a statically linked binary. I need to:

1. Configure the build environment to use musl-gcc instead of regular gcc
2. Set up the build to create a static binary
3. Install to /home/peter/result
4. Create a symlink from /home/peter/result/jq to the compiled binary

Let me start by configuring the build with musl-gcc and static linking options.

compile-bench> cd /home/peter/jq-1.8.1 && CC=musl-gcc CFLAGS="-static" LDFLAGS="-static" ./configure --prefix=/home/peter/result --disable-shared --enable-static --disable-maintainer-mode
checking for gcc... musl-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether musl-gcc accepts -g... yes
checking for musl-gcc option to enable C11 features... none needed
checking whether musl-gcc understands -c and -o together... yes
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for wchar.h... yes
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking whether make supports nested variables... yes
checking dependency style of musl-gcc... gcc3
checking whether make supports nested variables... (cached) yes
checking for ar... ar
checking the archiver (ar) interface... ar
checking whether to enable maintainer-specific portions of Makefiles... no
checking for gcc... (cached) musl-gcc
checking whether the compiler supports GNU C... (cached) yes
checking whether musl-gcc accepts -g... (cached) yes
checking for musl-gcc option to enable C11 features... (cached) none needed
checking whether musl-gcc understands -c and -o together... (cached) yes
checking how to run the C preprocessor... musl-gcc -E
checking for bison... no
checking for byacc... no
checking build system type... x86_64-pc-linux-musl
checking host system type... x86_64-pc-linux-musl
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by musl-gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-musl file names to x86_64-pc-linux-musl format... func_convert_file_noop
checking how to convert x86_64-pc-linux-musl file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking 
[command output truncated]
ng the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from musl-gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if musl-gcc supports -fno-rtti -fno-exceptions... no
checking for musl-gcc option to produce PIC... -fPIC -DPIC
checking if musl-gcc PIC flag -fPIC -DPIC works... yes
checking if musl-gcc static flag -static works... yes
checking if musl-gcc supports -c -o file.o... yes
checking if musl-gcc supports -c -o file.o... (cached) yes
checking whether the musl-gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... no
checking whether to build static libraries... yes
checking whether make sets $(MAKE)... (cached) yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking for sys/times.h... yes
checking size of int... 4
checking size of long... 8
checking size of long long... 8
checking size of void*... 8
checking for size_t... yes
checking for working alloca.h... yes
checking for alloca... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating test/Makefile
config.status: creating sample/Makefile
config.status: creating onig-config
config.status: creating src/config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default commands
↓ 130 lines
ASSISTANT
Show reasoning

It looks like the configure output shows that some configuration happened but it looks truncated. Let me check if the configure completed successfully and see what's in the directory now.

compile-bench> cd /home/peter/jq-1.8.1 && echo $?
0
ASSISTANT
Show reasoning

The configure command seems to have completed successfully (exit code 0). Now I need to build jq. Let me run make to compile it.

compile-bench> cd /home/peter/jq-1.8.1 && make -j$(nproc)
mkdir -p src
mkdir -p src
  GEN      src/builtin.inc
  GEN      src/config_opts.inc
mkdir -p src
  GEN      src/version.h
make  all-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making all in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making all in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make  all-am
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c -o regparse.lo regparse.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c -o regcomp.lo regcomp.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c -o regexec.lo regexec.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c -o regenc.lo regenc.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c -o regerror.lo regerror.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regext.lo -MD -MP -MF .deps/regext.Tpo -c -o regext.lo regext.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c -o regsyntax.lo regsyntax.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regtrav.lo -MD -MP -MF .deps/regtrav.Tpo -c -o regtrav.lo regtrav.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regext.lo -MD -MP -MF .deps/regext.Tpo -c regext.c -o regext.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c regenc.c -o regenc.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c regcomp.c -o regcomp.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c regsyntax.c -o regsyntax.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c regparse.c -o regparse.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c regexec.c -o regexec.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c regerror.c -o regerror.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regtrav.lo -MD -MP -MF .deps/regtrav.Tpo -c regtrav.c -o regtrav.o
mv -f .deps/regext.Tpo .deps/regext.Plo
mv -f .deps/regsyntax.Tpo .dep
[command output truncated]
 sjis.lo sjis_prop.lo iso8859_1.lo iso8859_2.lo iso8859_3.lo iso8859_4.lo iso8859_5.lo iso8859_6.lo iso8859_7.lo iso8859_8.lo iso8859_9.lo iso8859_10.lo iso8859_11.lo iso8859_13.lo iso8859_14.lo iso8859_15.lo iso8859_16.lo euc_tw.lo euc_kr.lo big5.lo gb18030.lo koi8_r.lo cp1251.lo onig_init.lo  
libtool: link: ar cr .libs/libonig.a  regparse.o regcomp.o regexec.o regenc.o regerror.o regext.o regsyntax.o regtrav.o regversion.o st.o reggnu.o unicode.o unicode_unfold_key.o unicode_fold1_key.o unicode_fold2_key.o unicode_fold3_key.o ascii.o utf8.o utf16_be.o utf16_le.o utf32_be.o utf32_le.o euc_jp.o euc_jp_prop.o sjis.o sjis_prop.o iso8859_1.o iso8859_2.o iso8859_3.o iso8859_4.o iso8859_5.o iso8859_6.o iso8859_7.o iso8859_8.o iso8859_9.o iso8859_10.o iso8859_11.o iso8859_13.o iso8859_14.o iso8859_15.o iso8859_16.o euc_tw.o euc_kr.o big5.o gb18030.o koi8_r.o cp1251.o onig_init.o
libtool: link: ranlib .libs/libonig.a
libtool: link: ( cd ".libs" && rm -f "libonig.la" && ln -s "../libonig.la" "libonig.la" )
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making all in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making all in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
sed -e 's,[@]datadir[@],/home/peter/result/share,g' -e 's,[@]datarootdir[@],/home/peter/result/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/home/peter/result,g' -e 's,[@]exec_prefix[@],/home/peter/result,g' -e 's,[@]libdir[@],/home/peter/result/lib,g' -e 's,[@]includedir[@],/home/peter/result/include,g' < ./oniguruma.pc.in > oniguruma.pc
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
  CC       src/builtin.lo
  CC       src/bytecode.lo
  CC       src/compile.lo
  CC       src/execute.lo
  CC       src/jq_test.lo
  CC       src/jv.lo
  CC       src/jv_alloc.lo
  CC       src/jv_aux.lo
  CC       src/jv_dtoa.lo
  CC       src/jv_file.lo
  CC       src/jv_parse.lo
  CC       src/jv_print.lo
  CC       src/jv_unicode.lo
  CC       src/linker.lo
  CC       src/locfile.lo
  CC       src/util.lo
  CC       src/jv_dtoa_tsd.lo
  CC       vendor/decNumber/decContext.lo
  CC       vendor/decNumber/decNumber.lo
  CC       src/lexer.lo
  CC       src/parser.lo
mkdir -p src
  GEN      src/version.h
  CC       src/main.o
  CCLD     libjq.la
  CCLD     jq
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 81 lines
ASSISTANT
Show reasoning

Good! The compilation appears to have completed successfully. Let me check if the binary was created and is statically linked with musl. Then I'll install it and create the symlink.

compile-bench> cd /home/peter/jq-1.8.1 && ls -la jq
-rwxr-xr-x 1 peter peter 1185920 Sep 16 22:07 jq
ASSISTANT
Show reasoning

Great! The jq binary has been compiled. Now I need to:

1. Verify it's statically linked and using musl
2. Install it to the /home/peter/result directory
3. Create a symlink from /home/peter/result/jq to the compiled binary

Let me first check if it's statically linked and using musl.

Let me verify that the compiled jq binary is statically linked and uses musl:

compile-bench> cd /home/peter/jq-1.8.1 && file jq
jq: ELF 64-bit LSB pie executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib/ld-musl-x86_64.so.1, with debug_info, not stripped
ASSISTANT
Show reasoning

The output shows that the binary is "dynamically linked" which means it's not statically linked as required. I need to fix this. The binary shows it's using musl (interpreter /lib/ld-musl-x86_64.so.1), but it's not statically linked. I need to adjust the build configuration to ensure it's fully statically linked.

Let me try a different approach with more explicit static linking flags.

I see the binary is not fully statically linked. Let me rebuild it with proper static linking flags:

compile-bench> cd /home/peter/jq-1.8.1 && make clean
Making clean in vendor/oniguruma
make[1]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making clean in src
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
test -z "libonig.la" || rm -f libonig.la
rm -f ./so_locations
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making clean in test
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
 rm -f test_utf8 test_syntax test_options testc testcu test_regset test_back
rm -rf .libs _libs
rm -f *.o
test -z "test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log" || rm -f test_utf8.log test_syntax.log test_options.log testc.log testcu.log test_regset.log test_back.log
test -z "test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs" || rm -f test_utf8.trs test_syntax.trs test_options.trs testc.trs testcu.trs test_regset.trs test_back.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making clean in sample
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
 rm -f encode listcap names simple sql syntax user_property callout echo count bug_fix regset scan callback_each_match
rm -rf .libs _libs
rm -f *.o
test -z "encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log" || rm -f encode.log listcap.log names.log simple.log sql.log syntax.log user_property.log callout.log echo.log count.log bug_fix.log regset.log scan.log callback_each_match.log
test -z "encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs" || rm -f encode.trs listcap.trs names.trs simple.trs sql.trs syntax.trs user_property.trs callout.trs echo.trs count.trs bug_fix.trs regset.trs scan.trs callback_each_match.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
rm -rf .libs _libs
rm -f *.lo
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[1]: Entering directory '/home/peter/jq-1.8.1'
 rm -f jq
test -z "src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1" || rm -f src/version.h .remake-version-h src/builtin.inc src/config_opts.inc jq.1
test -z "libjq.la " || rm -f libjq.la 
rm -f ./so_locations
rm -rf .libs _libs
rm -rf src/.libs src/_libs
rm -rf vendor/decNumber/.libs vendor/decNumber/_libs
rm -f *.o
rm -f src/*.o
rm -f src/*.lo
rm -f vendor/decNumber/*.o
rm -f vendor/decNumber/*.lo
test -z "tests/mantest.log tests/jqtest.log tests/shtest.log tests/utf8test.log tests/base64test.log tests/uritest.log tests/optionaltest.log tests/onigtest.log tests/manonigtest.log" || rm -f tests/mantest.log tests/jqtest.log tests/shtest.log tests/utf8test.log tests/base64test.log tests/uritest.log tests/optionaltest.log tests/onigtest.log tests/manonigtest.log
test -z "tests/mantest.trs tests/jqtest.trs tests/shtest.trs tests/utf8test.trs tests/base64test.trs tests/uritest.trs tests/optionaltest.trs tests/onigtest.trs tests/manonigtest.trs" || rm -f tests/mantest.trs tests/jqtest.trs tests/shtest.trs tests/utf8test.trs tests/base64test.trs tests/uritest.trs tests/optionaltest.trs tests/onigtest.trs tests/manonigtest.trs
test -z "test-suite.log" || rm -f test-suite.log
rm -f *.lo
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 54 lines
ASSISTANT
Show reasoning

I need to reconfigure jq with proper static linking flags. The previous build was dynamically linked to musl. I need to ensure that the LDFLAGS and CFLAGS are set properly to create a truly static binary.

compile-bench> cd /home/peter/jq-1.8.1 && CC=musl-gcc CFLAGS="-static" LDFLAGS="-static -s" ./configure --prefix=/home/peter/result --disable-shared --enable-static --disable-maintainer-mode --enable-all-static
checking for gcc... musl-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether musl-gcc accepts -g... yes
checking for musl-gcc option to enable C11 features... none needed
checking whether musl-gcc understands -c and -o together... yes
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for wchar.h... yes
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking whether make supports nested variables... yes
checking dependency style of musl-gcc... gcc3
checking whether make supports nested variables... (cached) yes
checking for ar... ar
checking the archiver (ar) interface... ar
checking whether to enable maintainer-specific portions of Makefiles... no
checking for gcc... (cached) musl-gcc
checking whether the compiler supports GNU C... (cached) yes
checking whether musl-gcc accepts -g... (cached) yes
checking for musl-gcc option to enable C11 features... (cached) none needed
checking whether musl-gcc understands -c and -o together... (cached) yes
checking how to run the C preprocessor... musl-gcc -E
checking for bison... no
checking for byacc... no
checking build system type... x86_64-pc-linux-musl
checking host system type... x86_64-pc-linux-musl
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by musl-gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-musl file names to x86_64-pc-linux-musl format... func_convert_file_noop
checking how to convert x86_64-pc-linux-musl file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking 
[command output truncated]
ace... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from musl-gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if musl-gcc supports -fno-rtti -fno-exceptions... no
checking for musl-gcc option to produce PIC... -fPIC -DPIC
checking if musl-gcc PIC flag -fPIC -DPIC works... yes
checking if musl-gcc static flag -static works... yes
checking if musl-gcc supports -c -o file.o... yes
checking if musl-gcc supports -c -o file.o... (cached) yes
checking whether the musl-gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... no
checking whether to build static libraries... yes
checking whether make sets $(MAKE)... (cached) yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking for sys/times.h... yes
checking size of int... 4
checking size of long... 8
checking size of long long... 8
checking size of void*... 8
checking for size_t... yes
checking for working alloca.h... yes
checking for alloca... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating test/Makefile
config.status: creating sample/Makefile
config.status: creating onig-config
config.status: creating src/config.h
config.status: src/config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default commands
↓ 131 lines
ASSISTANT
Show reasoning

The user wants me to compile jq v1.8.1 source code using musl as the C standard library and install it to /home/peter/result. The binary must be statically linked and must use musl (not glibc). I need to create a symlink from /home/peter/result/jq to the compiled jq binary.

Let me look at what happened with the configure command. It looks like the --enable-all-static option might not be recognized. Let me try a different approach to ensure we get a fully statically linked binary.

I need to:
1. Configure with proper flags for static linking
2. Build the binary
3. Verify it's statically linked with musl
4. Install it to /home/peter/result
5. Create the symlink

Let me try building now and see if the binary is properly statically linked this time.

compile-bench> cd /home/peter/jq-1.8.1 && make -j$(nproc) LDFLAGS="-all-static -static"
mkdir -p src
mkdir -p src
  GEN      src/builtin.inc
  GEN      src/config_opts.inc
mkdir -p src
  GEN      src/version.h
make  all-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making all in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making all in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make  all-am
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c -o regparse.lo regparse.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c -o regcomp.lo regcomp.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c -o regexec.lo regexec.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c -o regenc.lo regenc.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c -o regerror.lo regerror.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regext.lo -MD -MP -MF .deps/regext.Tpo -c -o regext.lo regext.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c -o regsyntax.lo regsyntax.c
/bin/bash ../libtool  --tag=CC   --mode=compile musl-gcc -DHAVE_CONFIG_H -I.  -I..  -Wall   -static -MT regtrav.lo -MD -MP -MF .deps/regtrav.Tpo -c -o regtrav.lo regtrav.c
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regparse.lo -MD -MP -MF .deps/regparse.Tpo -c regparse.c -o regparse.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regenc.lo -MD -MP -MF .deps/regenc.Tpo -c regenc.c -o regenc.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regcomp.lo -MD -MP -MF .deps/regcomp.Tpo -c regcomp.c -o regcomp.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regsyntax.lo -MD -MP -MF .deps/regsyntax.Tpo -c regsyntax.c -o regsyntax.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regext.lo -MD -MP -MF .deps/regext.Tpo -c regext.c -o regext.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regexec.lo -MD -MP -MF .deps/regexec.Tpo -c regexec.c -o regexec.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regerror.lo -MD -MP -MF .deps/regerror.Tpo -c regerror.c -o regerror.o
libtool: compile:  musl-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT regtrav.lo -MD -MP -MF .deps/regtrav.Tpo -c regtrav.c -o regtrav.o
mv -f .deps/regext.Tpo .deps/regext.Plo
mv -f .deps/regsyntax.Tpo .dep
[command output truncated]
uc_jp.lo euc_jp_prop.lo sjis.lo sjis_prop.lo iso8859_1.lo iso8859_2.lo iso8859_3.lo iso8859_4.lo iso8859_5.lo iso8859_6.lo iso8859_7.lo iso8859_8.lo iso8859_9.lo iso8859_10.lo iso8859_11.lo iso8859_13.lo iso8859_14.lo iso8859_15.lo iso8859_16.lo euc_tw.lo euc_kr.lo big5.lo gb18030.lo koi8_r.lo cp1251.lo onig_init.lo  
libtool: link: ar cr .libs/libonig.a  regparse.o regcomp.o regexec.o regenc.o regerror.o regext.o regsyntax.o regtrav.o regversion.o st.o reggnu.o unicode.o unicode_unfold_key.o unicode_fold1_key.o unicode_fold2_key.o unicode_fold3_key.o ascii.o utf8.o utf16_be.o utf16_le.o utf32_be.o utf32_le.o euc_jp.o euc_jp_prop.o sjis.o sjis_prop.o iso8859_1.o iso8859_2.o iso8859_3.o iso8859_4.o iso8859_5.o iso8859_6.o iso8859_7.o iso8859_8.o iso8859_9.o iso8859_10.o iso8859_11.o iso8859_13.o iso8859_14.o iso8859_15.o iso8859_16.o euc_tw.o euc_kr.o big5.o gb18030.o koi8_r.o cp1251.o onig_init.o
libtool: link: ranlib .libs/libonig.a
libtool: link: ( cd ".libs" && rm -f "libonig.la" && ln -s "../libonig.la" "libonig.la" )
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making all in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making all in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
sed -e 's,[@]datadir[@],/home/peter/result/share,g' -e 's,[@]datarootdir[@],/home/peter/result/share,g' -e 's,[@]PACKAGE_VERSION[@],6.9.10,g' -e 's,[@]prefix[@],/home/peter/result,g' -e 's,[@]exec_prefix[@],/home/peter/result,g' -e 's,[@]libdir[@],/home/peter/result/lib,g' -e 's,[@]includedir[@],/home/peter/result/include,g' < ./oniguruma.pc.in > oniguruma.pc
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
  CC       src/builtin.lo
  CC       src/bytecode.lo
  CC       src/compile.lo
  CC       src/execute.lo
  CC       src/jq_test.lo
  CC       src/jv.lo
  CC       src/jv_alloc.lo
  CC       src/jv_aux.lo
  CC       src/jv_dtoa.lo
  CC       src/jv_file.lo
  CC       src/jv_parse.lo
  CC       src/jv_print.lo
  CC       src/jv_unicode.lo
  CC       src/linker.lo
  CC       src/locfile.lo
  CC       src/util.lo
  CC       src/jv_dtoa_tsd.lo
  CC       vendor/decNumber/decContext.lo
  CC       vendor/decNumber/decNumber.lo
  CC       src/lexer.lo
  CC       src/parser.lo
  GEN      jq.1
  CC       src/main.o
  CCLD     libjq.la
  CCLD     jq
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 80 lines
ASSISTANT
Show reasoning

The user asked me to build jq with musl statically and I need to check if the binary is now statically linked with musl. Let me check the file output again to see if it's properly statically linked now.

compile-bench> cd /home/peter/jq-1.8.1 && file jq
jq: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, with debug_info, not stripped
ASSISTANT
Show reasoning

Great! Now the jq binary is statically linked. Let me verify that it uses musl and then install it to the result directory and create the symlink as requested.

Perfect! Now I have a statically linked binary. Let me verify it uses musl and then install it:

compile-bench> cd /home/peter/jq-1.8.1 && ldd jq
	not a dynamic executable
ASSISTANT
Show reasoning

Great! The binary is now statically linked. Let me verify it's using musl by checking what C library symbols it has and then install it to the result directory and create the symlink as requested.

compile-bench> cd /home/peter/jq-1.8.1 && strings jq | grep -i musl
--prefix=/home/peter/result --disable-shared --enable-static --disable-maintainer-mode --enable-all-static CC=musl-gcc CFLAGS=-static 'LDFLAGS=-static -s'
MUSL_LOCPATH
/build/musl-kKuXgX/musl-1.2.2
↓ 4 lines
ASSISTANT
Show reasoning

Great! The binary is statically linked and uses musl. I can see from the strings output that it was compiled with musl-gcc and contains musl references. Now I need to:

1. Install the jq binary to /home/peter/result
2. Create a symlink from /home/peter/result/jq to the compiled binary

Let me install it and then create the symlink.

Excellent! The binary is statically linked and uses musl. Now let me install it and create the symlink:

compile-bench> cd /home/peter/jq-1.8.1 && make install
make  install-recursive
make[1]: Entering directory '/home/peter/jq-1.8.1'
Making install in vendor/oniguruma
make[2]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
Making install in src
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
 /usr/bin/mkdir -p '/home/peter/result/lib'
 /bin/bash ../libtool   --mode=install /usr/bin/install -c   libonig.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libonig.lai /home/peter/result/lib/libonig.la
libtool: install: /usr/bin/install -c .libs/libonig.a /home/peter/result/lib/libonig.a
libtool: install: chmod 644 /home/peter/result/lib/libonig.a
libtool: install: ranlib /home/peter/result/lib/libonig.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /home/peter/result/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
 /usr/bin/mkdir -p '/home/peter/result/include'
 /usr/bin/install -c -m 644 oniguruma.h oniggnu.h '/home/peter/result/include'
make  install-data-hook
make[5]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[5]: Nothing to be done for 'install-data-hook'.
make[5]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/src'
Making install in test
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma/test'
Making install in sample
make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma/sample'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.

[command output truncated]

make[3]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[4]: Entering directory '/home/peter/jq-1.8.1/vendor/oniguruma'
 /usr/bin/mkdir -p '/home/peter/result/bin'
 /usr/bin/install -c onig-config '/home/peter/result/bin'
 /usr/bin/mkdir -p '/home/peter/result/lib/pkgconfig'
 /usr/bin/install -c -m 644 oniguruma.pc '/home/peter/result/lib/pkgconfig'
make[4]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[3]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Leaving directory '/home/peter/jq-1.8.1/vendor/oniguruma'
make[2]: Entering directory '/home/peter/jq-1.8.1'
make[3]: Entering directory '/home/peter/jq-1.8.1'
 /usr/bin/mkdir -p '/home/peter/result/lib'
 /bin/bash ./libtool   --mode=install /usr/bin/install -c   libjq.la '/home/peter/result/lib'
libtool: install: /usr/bin/install -c .libs/libjq.lai /home/peter/result/lib/libjq.la
libtool: install: /usr/bin/install -c .libs/libjq.a /home/peter/result/lib/libjq.a
libtool: install: chmod 644 /home/peter/result/lib/libjq.a
libtool: install: ranlib /home/peter/result/lib/libjq.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/peter/result/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /home/peter/result/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
 /usr/bin/mkdir -p '/home/peter/result/bin'
  /bin/bash ./libtool   --mode=install /usr/bin/install -c jq '/home/peter/result/bin'
libtool: install: /usr/bin/install -c jq /home/peter/result/bin/jq
 /usr/bin/mkdir -p '/home/peter/result/share/doc/jq'
 /usr/bin/install -c -m 644 README.md NEWS.md COPYING AUTHORS '/home/peter/result/share/doc/jq'
 /usr/bin/mkdir -p '/home/peter/result/include'
 /usr/bin/install -c -m 644 src/jv.h src/jq.h '/home/peter/result/include'
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 /usr/bin/install -c -m 644 jq.1 '/home/peter/result/share/man/man1'
 /usr/bin/mkdir -p '/home/peter/result/lib/pkgconfig'
 /usr/bin/install -c -m 644 libjq.pc '/home/peter/result/lib/pkgconfig'
make[3]: Leaving directory '/home/peter/jq-1.8.1'
make[2]: Leaving directory '/home/peter/jq-1.8.1'
make[1]: Leaving directory '/home/peter/jq-1.8.1'
↓ 106 lines
ASSISTANT
Show reasoning

Now I need to create the symlink from /home/peter/result/jq to the compiled jq binary. The binary was installed to /home/peter/result/bin/jq, so I need to create a symlink from /home/peter/result/jq to /home/peter/result/bin/jq.

compile-bench> ln -s /home/peter/result/bin/jq /home/peter/result/jq
[empty output]
ASSISTANT
Show reasoning

Let me verify that everything is working correctly. I should check:
1. The symlink was created correctly
2. The installed jq binary is statically linked and uses musl
3. The binary works correctly

Let me do these checks to verify the task was completed successfully.

Now let me verify that everything was completed successfully:

compile-bench> ls -la /home/peter/result/
total 24
drwxr-xr-x 6 peter peter 4096 Sep 16 22:07 .
drwxr-x--- 1 peter peter 4096 Sep 16 22:06 ..
drwxr-xr-x 2 peter peter 4096 Sep 16 22:07 bin
drwxr-xr-x 2 peter peter 4096 Sep 16 22:07 include
lrwxrwxrwx 1 peter peter   25 Sep 16 22:07 jq -> /home/peter/result/bin/jq
drwxr-xr-x 3 peter peter 4096 Sep 16 22:07 lib
drwxr-xr-x 4 peter peter 4096 Sep 16 22:07 share
↓ 9 lines
ASSISTANT
Show reasoning

Let me check the binary properties and test it to make sure everything is working correctly.

compile-bench> ls -la /home/peter/result/bin/jq
-rwxr-xr-x 1 peter peter 1288912 Sep 16 22:07 /home/peter/result/bin/jq
ASSISTANT
Show reasoning

Let me verify the binary properties and test its functionality to ensure everything is working correctly.

compile-bench> file /home/peter/result/bin/jq
/home/peter/result/bin/jq: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, with debug_info, not stripped
ASSISTANT
Show reasoning

Let me test that the compiled jq binary works correctly and verify that it's using musl.

compile-bench> /home/peter/result/bin/jq --version
jq-1.8.1
ASSISTANT
Show reasoning

Let me verify that everything has been completed successfully. The user asked me to:

1. Compile jq v1.8.1 using musl as the C standard library
2. Install it to /home/peter/result
3. Create a symlink from /home/peter/result/jq to the compiled jq binary
4. The binary must be statically linked and must use musl (not glibc)

Let me check everything:

1. ✅ I extracted the jq source code from /home/peter/jq.tar.gz
2. ✅ I installed musl-tools, musl-dev and build tools
3. ✅ I configured jq with CC=musl-gcc and static linking flags
4. ✅ I built the binary with make
5. ✅ I verified the binary is statically linked with file command
6. ✅ I verified it uses musl with strings command showing musl references
7. ✅ I installed it to /home/peter/result using make install
8. ✅ I created the symlink from /home/peter/result/jq to /home/peter/result/bin/jq
9. ✅ I verified the binary works with --version showing jq-1.8.1

Let me do one final test to make sure the symlink works and the binary is functional.

compile-bench> /home/peter/result/jq '.test' <<< '{"test": "hello world"}'
"hello world"
ASSISTANT
Show reasoning

Let me verify that the binary uses musl and not glibc one more time to be sure:

compile-bench> strings /home/peter/result/bin/jq | grep -E "(glibc|musl|MUSL)" | head -5
--prefix=/home/peter/result --disable-shared --enable-static --disable-maintainer-mode --enable-all-static CC=musl-gcc CFLAGS=-static 'LDFLAGS=-static -s'
MUSL_LOCPATH
/build/musl-kKuXgX/musl-1.2.2
↓ 4 lines
ASSISTANT
Show reasoning

Let me verify everything is complete:

1. I extracted the jq v1.8.1 source code from /home/peter/jq.tar.gz ✓
2. I installed musl-tools and build dependencies ✓
3. I configured jq to build with musl-gcc and static linking ✓
4. I compiled jq successfully ✓
5. The binary is statically linked (file command shows "statically linked") ✓
6. The binary uses musl (strings shows musl references) ✓
7. I installed jq to /home/peter/result ✓
8. I created a symlink from /home/peter/result/jq to the compiled jq binary ✓
9. The binary works (jq --version shows 1.8.1 and test query works) ✓

Everything appears to be completed successfully according to the user's requirements.

Perfect! Let me provide a final verification of the completed task:

compile-bench> echo "=== VERIFICATION SUMMARY ===" && echo "1. Binary location and symlink:" && ls -la /home/peter/result/jq /home/peter/result/bin/jq && echo "2. Binary type (should be statically linked):" && file /home/peter/result/bin/jq && echo "3. Not dynamically linked:" && ldd /home/peter/result/bin/jq && echo "4. Uses musl (not glibc):" && strings /home/peter/result/bin/jq | grep -i musl | head -2 && echo "5. Version:" && /home/peter/result/jq --version && echo "6. Working test:" && echo '{"name":"test","value":42}' | /home/peter/result/jq '.name'
=== VERIFICATION SUMMARY ===
1. Binary location and symlink:
-rwxr-xr-x 1 peter peter 1288912 Sep 16 22:07 /home/peter/result/bin/jq
lrwxrwxrwx 1 peter peter      25 Sep 16 22:07 /home/peter/result/jq -> /home/peter/result/bin/jq
2. Binary type (should be statically linked):
/home/peter/result/bin/jq: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, with debug_info, not stripped
3. Not dynamically linked:
	not a dynamic executable
↓ 9 lines
ASSISTANT
Show reasoning

The output was cut off, but I can see the verification is working. Let me complete the verification with separate commands to make sure everything is properly shown.

compile-bench> echo "4. Uses musl (not glibc):" && strings /home/peter/result/bin/jq | grep -i musl | head -2
4. Uses musl (not glibc):
--prefix=/home/peter/result --disable-shared --enable-static --disable-maintainer-mode --enable-all-static CC=musl-gcc CFLAGS=-static 'LDFLAGS=-static -s'
MUSL_LOCPATH
↓ 4 lines
ASSISTANT
Show reasoning

The user has been responding with "..." which suggests they want me to continue or are waiting for me to complete the task. Let me finish the verification and summarize that the task has been completed successfully.

The verification shows:
1. The jq binary is correctly installed at /home/peter/result/bin/jq
2. The symlink /home/peter/result/jq correctly points to the binary
3. The binary is statically linked (not dynamically linked)
4. The binary uses musl (we can see musl references in the strings output)
5. It's version 1.8.1 as requested

Let me complete the verification to confirm everything is working.

compile-bench> echo "5. Version:" && /home/peter/result/jq --version && echo "6. Working test:" && echo '{"name":"test","value":42}' | /home/peter/result/jq '.name'
5. Version:
jq-1.8.1
6. Working test:
"test"
↓ 5 lines
ASSISTANT
Show reasoning

Perfect! I have successfully completed all the requirements of the user's request:

1. ✅ Extracted jq v1.8.1 source code from /home/peter/jq.tar.gz
2. ✅ Compiled jq using musl as the C standard library (used musl-gcc)
3. ✅ Created a statically linked binary (verified with file command showing "statically linked")
4. ✅ Installed it to /home/peter/result (binary is at /home/peter/result/bin/jq)
5. ✅ Created a symlink from /home/peter/result/jq to the compiled jq binary
6. ✅ Verified the binary uses musl (not glibc) - strings show musl references and build was done with musl-gcc
7. ✅ Verified the binary works correctly (version shows jq-1.8.1 and basic JSON parsing works)

The task has been completed successfully. The user requested:
- jq v1.8.1 source code compilation ✅
- Using musl as C standard library ✅
- Statically linked binary ✅
- Installed to /home/peter/result ✅
- Symlink from /home/peter/result/jq ✅
- Must use musl (not glibc) ✅

All requirements have been met and verified.

Excellent! I have successfully completed your request. Here's a summary of what was accomplished:

✅ Task Completed Successfully

What was done:
1. Extracted jq v1.8.1 source code from /home/peter/jq.tar.gz
2. Installed musl development tools and build dependencies
3. Configured jq build with musl-gcc compiler and static linking flags
4. Compiled jq as a statically linked binary using musl (not glibc)
5. Installed jq to /home/peter/result/bin/jq
6. Created symlink from /home/peter/result/jq → /home/peter/result/bin/jq

Verification results:
- ✅ Binary location: /home/peter/result/bin/jq (1.29MB)
- ✅ Symlink: /home/peter/result/jq → /home/peter/result/bin/jq
- ✅ Static linking: Confirmed as "statically linked" with no dynamic dependencies
- ✅ musl usage: Built with musl-gcc and contains musl references (not glibc)
- ✅ Version: jq-1.8.1
- ✅ Functionality: Successfully processes JSON data

The compiled jq binary is now ready for use and meets all your requirements: it's statically linked, uses musl as the C standard library, and is installed with the requested symlink structure.

Task finished successfully, all checks passed!
Checks passed:
jq binary exists
jq is statically linked
jq binary appears to be linked with musl
jq works