Summary
Performance
Cost$0.011
Total elapsed time1m9s
LLM inference time19s
Command execution time50s
Commands executed9
All details >
Attempt ID 0jjoczrhw7t0d Attempt group run-16-09-22-05
Revision fb5c74bd2fee AWS Instance m8i.2xlarge
Start time 2025-09-16T21:33:23.968Z End time 2025-09-16T21:34:33.499Z
Task coreutils Environment ubuntu-22.04-amd64-offline
Model gemini-2.5-flash-thinking logo gemini-2.5-flash-thinking OpenRouter slug google/gemini-2.5-flash
Temperature 1 Explicit prompt caching false
User msg after tool call false Max tool calls 50
Total timeout seconds 900 Single command timeout 600
Cost $0.011 Duration 1m9s
LLM inference time 19s Command execution time 50s
Final context tokens 6,784 Total output tokens 1,535
Output reasoning tokens 1,257 Messages 21
Assistant messages 10 User messages 1
System messages 1 Commands executed 9
Task
Task: coreutils

GNU coreutils 9.7 is a collection of Linux utilities like ls, cp, mv, etc.
Project link: gnu.org/software/coreutils

Task:
Compile and install all coreutils utilities to a specific location.

Difficulties:
Standard autotools setup, nothing special.

Environment:
Ubuntu 22.04 on amd64, without internet access.

Execution log
SYSTEM

You are a package-building specialist operating a Ubuntu 22.04 bash shell via one tool: run_terminal_cmd.
The current working directory of every run_terminal_cmd is /home/peter.
Execution rules:
- Always pass non-interactive flags for any command that could prompt (e.g., -y, --yes, DEBIAN_FRONTEND=noninteractive).
- Don't include any newlines in the command.
- The environment is offline, assume you have all the necessary tools already installed.
If you encounter any errors or issues while doing the user's request, you must fix them and continue the task.
At the end verify you did the user request correctly.

USER

You are given a coreutils v9.7 source code at /home/peter/coreutils.tar.gz. Please compile the coreutils package and install it to /home/peter/result. Create symlinks for all coreutils utilities so they are available under /home/peter/result/. For example: /home/peter/result/uptime should point to the compiled uptime binary.

ASSISTANT
Show reasoning

Installing coreutils

I've got the coreutils source code now, and the installation target is locked in. Currently, I'm planning the build steps. I will need to untar the archive, configure with the install prefix, build the binaries, and then install everything. Finally, I will create the necessary symlinks as per instructions.

Initiating extraction of source

I've now taken the plunge and initiated the source code extraction, as the first step, using tar. The archive resides at /home/peter/coreutils.tar.gz, which I've verified. The next step is to navigate to the newly created directory.

compile-bench> tar -xzf coreutils.tar.gz
[empty output]
ASSISTANT
Show reasoning

Examining Coreutils Installation

I've just extracted the tarball. My next step is to change into the extracted directory. I need to list the directory contents to identify the correct directory name before I configure, compile, and install coreutils. I'll then create symlinks as the final step.

compile-bench> ls
coreutils-9.7  coreutils.tar.gz
ASSISTANT
Show reasoning

Executing Coreutils Build

I've successfully extracted the source code to coreutils-9.7. My next step involves navigating to the directory, then configuring the build process. Afterwards, it's make, followed by installation into /home/peter/result. I'm ready to generate those symlinks!

Initiating Build Configuration

I've entered the coreutils-9.7 directory. I am now configuring the build with the prefix set to /home/peter/result, as planned. The next steps are making and installing, then generating the symlinks.

compile-bench> cd coreutils-9.7 && ./configure --prefix=/home/peter/result
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C23 features... unsupported
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking whether the compiler is clang... no
checking for compiler option needed when checking for declarations... none
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking for ranlib... ranlib
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking whether ln -s works... yes
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for wchar.h... yes
checking for minix/config.h... no
checking for arpa/inet.h... yes
checking for features.h... yes
checking for sys/socket.h... yes
checking for stdbool.h... yes
checking for byteswap.h... yes
checking for xlocale.h... no
checking for uchar.h... yes
checking for sys/param.h... yes
checking for dirent.h... yes
checking for endian.h... yes
checking for sys/endian.h... no
checking for error.h... yes
checking for linux/xattr.h... yes
checking for selinux/selinux.h... no
checking for fnmatch.h... yes
checking for stdio_ext.h... yes
checking for sys/vfs.h... yes
checking for sys/fs_types.h... no
checking for netdb.h... yes
checking for netinet/in.h... yes
checking for getopt.h... yes
checking for sys/time.h... yes
checking for grp.h... yes
checking for threads.h... yes
checking for iconv.h... yes
checking for limits.h... yes
checking for crtdefs.h... no
checking for wctype.h... yes
checking for langinfo.h... yes
checking for math.h... yes
checking for sys/mman.h... yes
[command output truncated]
checking whether setregid is declared... yes
checking for declarations of fseeko and ftello... yes
checking for struct stat.st_author... no
checking for ino_t... yes
checking for major_t... no
checking for minor_t... no
checking for mode_to_security_class... no
checking for inotify_init... yes
checking for nfs/vfs.h... no
checking for struct statvfs.f_basetype... no
checking for struct statvfs.f_fstypename... no
checking for struct statvfs.f_type... no
checking for struct statfs.f_namelen... yes
checking for struct statfs.f_namemax... no
checking for struct statfs.f_type... (cached) yes
checking for struct statfs.f_frsize... yes
checking for cap_get_file in -lcap... no
configure: WARNING: libcap library was not found or not usable.
configure: WARNING: GNU coreutils will be built without capability support.
checking for working fork... yes
checking for working vfork... (cached) yes
checking for chroot... yes
checking for gethostid... yes
checking for sigsuspend... yes
checking whether use of struct winsize requires sys/ptem.h... (cached) no
checking whether localtime caches TZ... no
checking for library containing dlopen... none required
checking for fclonefileat... no
checking for getattrat... no
checking for statx... yes
checking for initgroups... yes
checking for syslog... yes
checking for 3-argument setpriority function... yes
checking POSIX termios... (cached) yes
checking whether use of TIOCGWINSZ requires sys/ioctl.h... (cached) yes
checking whether termios.h needs _XOPEN_SOURCE... no
checking c_line in struct termios... yes
checking whether use of struct winsize requires sys/ptem.h... (cached) no
checking whether use of TIOCGWINSZ requires termios.h... (cached) no
checking whether C compiler handles -Werror... yes
checking whether C compiler handles -errwarn... no
checking whether this system supports stdbuf... yes
checking IEEE 16 bit floating point... no
checking Brain 16 bit floating point... no
checking if vmull intrinsic exists... no
checking if pclmul intrinsic exists... yes
checking if avx2 pclmul intrinsic exists... yes
checking if avx512 pclmul intrinsic exists... yes
checking for avx2 intrinsics... yes
checking whether NLS is requested... yes
checking for msgfmt... no
checking for gmsgfmt... :
checking for xgettext... no
checking for msgmerge... no
checking for CFPreferencesCopyAppValue... (cached) no
checking for CFLocaleCopyPreferredLanguages... (cached) no
checking for GNU gettext in libc... yes
checking whether to use NLS... yes
checking where the gettext function comes from... libc
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating po/Makefile.in
config.status: creating gnulib-tests/Makefile
config.status: creating lib/config.h
config.status: executing depfiles commands
config.status: executing po-directories commands
config.status: creating po/POTFILES
config.status: creating po/Makefile
141 lines
ASSISTANT
Show reasoning

Confirming Successful Configuration

The initial configuration step has completed without errors, which is a positive sign. Next up, I'll be tackling the compilation phase with make, followed by the installation of the built components using make install. Hoping for a smooth transition through these stages.

compile-bench> cd coreutils-9.7 && make -j$(nproc)
  GEN      lib/alloca.h
  GEN      lib/arpa/inet.h
  GEN      lib/configmake.h
  GEN      lib/ctype.h
  GEN      lib/dirent.h
  GEN      lib/endian.h
  GEN      lib/error.h
  GEN      lib/fcntl.h
  GEN      lib/float.h
  GEN      lib/malloc/dynarray.gl.h
  GEN      lib/malloc/dynarray-skeleton.gl.h
  GEN      lib/malloc/scratch_buffer.gl.h
  GEN      lib/iconv.h
  GEN      lib/inttypes.h
  GEN      lib/langinfo.h
  GEN      lib/gmp.h
  GEN      lib/limits.h
  GEN      lib/locale.h
  GEN      lib/math.h
  GEN      lib/netdb.h
  GEN      lib/obstack.h
  GEN      lib/pthread.h
  GEN      lib/sched.h
  GEN      lib/selinux/selinux.h
  GEN      lib/selinux/context.h
  GEN      lib/selinux/label.h
  GEN      lib/signal.h
  GEN      lib/stdbit.h
  GEN      lib/stdckdint.h
  GEN      lib/stddef.h
  GEN      lib/stdio.h
  GEN      lib/stdlib.h
  GEN      lib/string.h
  GEN      lib/sys/ioctl.h
  GEN      lib/sys/random.h
  GEN      lib/sys/resource.h
  GEN      lib/sys/select.h
  GEN      lib/sys/socket.h
  GEN      lib/sys/stat.h
  GEN      lib/sys/time.h
  GEN      lib/sys/types.h
  GEN      lib/sys/uio.h
  GEN      lib/sys/utsname.h
  GEN      lib/sys/wait.h
  GEN      lib/termios.h
  GEN      lib/time.h
  GEN      lib/uchar.h
  GEN      lib/unicase.h
  GEN      lib/unictype.h
  GEN      lib/uninorm.h
  GEN      lib/unistd.h
  GEN      lib/unistr.h
  GEN      lib/unitypes.h
  GEN      lib/uniwidth.h
  GEN      lib/utime.h
  GEN      lib/wchar.h
  GEN      lib/wctype.h
  GEN      src/coreutils.h
  GEN      src/version.c
  GEN      src/version.h
make  all-recursive
make[1]: Entering directory '/home/peter/coreutils-9.7'
Making all in po
make[2]: Entering directory '/home/peter/coreutils-9.7/po'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/home/peter/coreutils-9.7/po'
Making all in .
make[2]: Entering directory '/home/peter/coreutils-9.7'
  CC       lib/libcoreutils_a-long-options.o
  CC       lib/libcoreutils_a-malloca.o
[command output truncated]
  GEN      man/touch.1
  GEN      man/tr.1
  GEN      man/true.1
  GEN      man/truncate.1
  GEN      man/tsort.1
  GEN      man/tty.1
  GEN      man/uname.1
  GEN      man/unexpand.1
  GEN      man/uniq.1
  GEN      man/unlink.1
  GEN      man/uptime.1
  GEN      man/vdir.1
  GEN      man/wc.1
  GEN      man/whoami.1
  GEN      man/yes.1
make[2]: Leaving directory '/home/peter/coreutils-9.7'
Making all in gnulib-tests
make[2]: Entering directory '/home/peter/coreutils-9.7/gnulib-tests'
## ---------------------------------------------------- ##
## ------------------- Gnulib tests ------------------- ##
## You can ignore compiler warnings in this directory.  ##
## ---------------------------------------------------- ##
make  all-recursive
make[3]: Entering directory '/home/peter/coreutils-9.7/gnulib-tests'
Making all in .
make[4]: Entering directory '/home/peter/coreutils-9.7/gnulib-tests'
  CC       bench_crc-bench-crc.o
  CC       bench_crc-randomb.o
  CC       c-strcasestr.o
  CC       c32tob.o
  CC       concat-filename.o
  CC       getlocalename_l-unsafe.o
  CC       localename-table.o
  CC       ioctl.o
  CC       localename.o
  CC       localename-environ.o
  CC       localename-unsafe.o
  CC       pthread-rwlock.o
  CC       str_startswith.o
  CC       timespec-add.o
  CC       timespec-sub.o
  CC       vma-iter.o
  CC       xconcat-filename.o
  CC       xgetcwd.o
  CC       strerror_r.o
  CC       bench_md5-bench-md5.o
  CC       bench_sha1-bench-sha1.o
  CC       bench_sha224-bench-sha224.o
  CC       bench_sha256-bench-sha256.o
  CC       bench_sha384-bench-sha384.o
  CC       bench_sha512-bench-sha512.o
  CC       locale.o
  CC       test-localcharset.o
  CC       glthread/thread.o
  CC       unistr/u32-set.o
  AR       libtests.a
  CCLD     bench-crc
  CCLD     bench-md5
  CCLD     bench-sha1
  CCLD     bench-sha224
  CCLD     bench-sha256
  CCLD     bench-sha384
  CCLD     bench-sha512
  CCLD     current-locale
  CCLD     test-localcharset
make[4]: Leaving directory '/home/peter/coreutils-9.7/gnulib-tests'
make[3]: Leaving directory '/home/peter/coreutils-9.7/gnulib-tests'
make[2]: Leaving directory '/home/peter/coreutils-9.7/gnulib-tests'
make[1]: Leaving directory '/home/peter/coreutils-9.7'
141 lines
ASSISTANT
Show reasoning

Completing Installation

The compilation of coreutils is done, and I'm now proceeding to install it. My target directory is /home/peter/result.

compile-bench> cd coreutils-9.7 && make install
make  install-recursive
make[1]: Entering directory '/home/peter/coreutils-9.7'
Making install in po
make[2]: Entering directory '/home/peter/coreutils-9.7/po'
installing af.gmo as /home/peter/result/share/locale/af/LC_MESSAGES/coreutils.mo
installing af.gmo link as /home/peter/result/share/locale/af/LC_TIME/coreutils.mo
installing be.gmo as /home/peter/result/share/locale/be/LC_MESSAGES/coreutils.mo
installing be.gmo link as /home/peter/result/share/locale/be/LC_TIME/coreutils.mo
installing bg.gmo as /home/peter/result/share/locale/bg/LC_MESSAGES/coreutils.mo
installing bg.gmo link as /home/peter/result/share/locale/bg/LC_TIME/coreutils.mo
installing ca.gmo as /home/peter/result/share/locale/ca/LC_MESSAGES/coreutils.mo
installing ca.gmo link as /home/peter/result/share/locale/ca/LC_TIME/coreutils.mo
installing cs.gmo as /home/peter/result/share/locale/cs/LC_MESSAGES/coreutils.mo
installing cs.gmo link as /home/peter/result/share/locale/cs/LC_TIME/coreutils.mo
installing da.gmo as /home/peter/result/share/locale/da/LC_MESSAGES/coreutils.mo
installing da.gmo link as /home/peter/result/share/locale/da/LC_TIME/coreutils.mo
installing de.gmo as /home/peter/result/share/locale/de/LC_MESSAGES/coreutils.mo
installing de.gmo link as /home/peter/result/share/locale/de/LC_TIME/coreutils.mo
installing el.gmo as /home/peter/result/share/locale/el/LC_MESSAGES/coreutils.mo
installing el.gmo link as /home/peter/result/share/locale/el/LC_TIME/coreutils.mo
installing eo.gmo as /home/peter/result/share/locale/eo/LC_MESSAGES/coreutils.mo
installing eo.gmo link as /home/peter/result/share/locale/eo/LC_TIME/coreutils.mo
installing es.gmo as /home/peter/result/share/locale/es/LC_MESSAGES/coreutils.mo
installing es.gmo link as /home/peter/result/share/locale/es/LC_TIME/coreutils.mo
installing et.gmo as /home/peter/result/share/locale/et/LC_MESSAGES/coreutils.mo
installing et.gmo link as /home/peter/result/share/locale/et/LC_TIME/coreutils.mo
installing eu.gmo as /home/peter/result/share/locale/eu/LC_MESSAGES/coreutils.mo
installing eu.gmo link as /home/peter/result/share/locale/eu/LC_TIME/coreutils.mo
installing fi.gmo as /home/peter/result/share/locale/fi/LC_MESSAGES/coreutils.mo
installing fi.gmo link as /home/peter/result/share/locale/fi/LC_TIME/coreutils.mo
installing fr.gmo as /home/peter/result/share/locale/fr/LC_MESSAGES/coreutils.mo
installing fr.gmo link as /home/peter/result/share/locale/fr/LC_TIME/coreutils.mo
installing ga.gmo as /home/peter/result/share/locale/ga/LC_MESSAGES/coreutils.mo
installing ga.gmo link as /home/peter/result/share/locale/ga/LC_TIME/coreutils.mo
installing gl.gmo as /home/peter/result/share/locale/gl/LC_MESSAGES/coreutils.mo
installing gl.gmo link as /home/peter/result/share/locale/gl/LC_TIME/coreutils.mo
installing hr.gmo as /home/peter/result/share/locale/hr/LC_MESSAGES/coreutils.mo
installing hr.gmo link as /home/peter/result/share/locale/hr/LC_TIME/coreutils.mo
installing hu.gmo as /home/pete
[command output truncated]
sha256sum src/sha384sum src/sha512sum src/shred src/shuf src/sleep src/sort src/split src/stat src/sum src/sync src/tac src/tail src/tee src/test src/touch src/tr src/true src/truncate src/tsort src/tty src/uname src/unexpand src/uniq src/unlink src/uptime src/vdir src/wc src/whoami src/yes '/home/peter/result/bin'
 /usr/bin/mkdir -p '/home/peter/result/libexec/coreutils'
  src/ginstall -c src/libstdbuf.so '/home/peter/result/libexec/coreutils'
make  install-exec-hook
make[4]: Entering directory '/home/peter/coreutils-9.7'
make[4]: Leaving directory '/home/peter/coreutils-9.7'
 /usr/bin/mkdir -p '/home/peter/result/share/info'
 src/ginstall -c -m 644 ./doc/coreutils.info '/home/peter/result/share/info'
 /usr/bin/mkdir -p '/home/peter/result/share/man/man1'
 src/ginstall -c -m 644 man/chroot.1 man/hostid.1 man/timeout.1 man/nice.1 man/who.1 man/users.1 man/pinky.1 man/stty.1 man/df.1 man/stdbuf.1 man/b2sum.1 man/base64.1 man/base32.1 man/basenc.1 man/basename.1 man/cat.1 man/chcon.1 man/chgrp.1 man/chmod.1 man/chown.1 man/cksum.1 man/comm.1 man/cp.1 man/csplit.1 man/cut.1 man/date.1 man/dd.1 man/dir.1 man/dircolors.1 man/dirname.1 man/du.1 man/echo.1 man/env.1 man/expand.1 man/expr.1 man/factor.1 man/false.1 man/fmt.1 man/fold.1 man/install.1 '/home/peter/result/share/man/man1'
 src/ginstall -c -m 644 man/groups.1 man/head.1 man/id.1 man/join.1 man/kill.1 man/link.1 man/ln.1 man/logname.1 man/ls.1 man/md5sum.1 man/mkdir.1 man/mkfifo.1 man/mknod.1 man/mktemp.1 man/mv.1 man/nl.1 man/nproc.1 man/nohup.1 man/numfmt.1 man/od.1 man/paste.1 man/pathchk.1 man/pr.1 man/printenv.1 man/printf.1 man/ptx.1 man/pwd.1 man/readlink.1 man/realpath.1 man/rm.1 man/rmdir.1 man/runcon.1 man/seq.1 man/sha1sum.1 man/sha224sum.1 man/sha256sum.1 man/sha384sum.1 man/sha512sum.1 man/shred.1 man/shuf.1 '/home/peter/result/share/man/man1'
 src/ginstall -c -m 644 man/sleep.1 man/sort.1 man/split.1 man/stat.1 man/sum.1 man/sync.1 man/tac.1 man/tail.1 man/tee.1 man/test.1 man/touch.1 man/tr.1 man/true.1 man/truncate.1 man/tsort.1 man/tty.1 man/uname.1 man/unexpand.1 man/uniq.1 man/unlink.1 man/uptime.1 man/vdir.1 man/wc.1 man/whoami.1 man/yes.1 '/home/peter/result/share/man/man1'
make[3]: Leaving directory '/home/peter/coreutils-9.7'
make[2]: Leaving directory '/home/peter/coreutils-9.7'
Making install in gnulib-tests
make[2]: Entering directory '/home/peter/coreutils-9.7/gnulib-tests'
make  install-recursive
make[3]: Entering directory '/home/peter/coreutils-9.7/gnulib-tests'
Making install in .
make[4]: Entering directory '/home/peter/coreutils-9.7/gnulib-tests'
make[5]: Entering directory '/home/peter/coreutils-9.7/gnulib-tests'
make[5]: Leaving directory '/home/peter/coreutils-9.7/gnulib-tests'
make[4]: Leaving directory '/home/peter/coreutils-9.7/gnulib-tests'
make[3]: Leaving directory '/home/peter/coreutils-9.7/gnulib-tests'
make[2]: Leaving directory '/home/peter/coreutils-9.7/gnulib-tests'
make[1]: Leaving directory '/home/peter/coreutils-9.7'
67 lines
ASSISTANT
Show reasoning

Mapping utility locations

I've successfully compiled and installed the core utils package to the /home/peter/result directory. My current focus is on establishing symlinks. I'm now working to identify all installed utilities, which should reside within that directory.

Establishing Symlinks for Utilities

I've now located the coreutils binaries within /home/peter/result/bin. My next task involves iterating through these binaries. I'm going to craft symlinks directly within /home/peter/result/ to make the utilities readily accessible. It's a straightforward process, and progress is steady.

compile-bench> ls /home/peter/result/bin
'['         cut         groups    mv         realpath    stdbuf     unexpand
 b2sum      date        head      nice       rm          stty       uniq
 base32     dd          hostid    nl         rmdir       sum        unlink
 base64     df          id        nohup      runcon      sync       uptime
 basename   dir         install   nproc      seq         tac        users
 basenc     dircolors   join      numfmt     sha1sum     tail       vdir
 cat        dirname     kill      od         sha224sum   tee        wc
 chcon      du          link      paste      sha256sum   test       who
 chgrp      echo        ln        pathchk    sha384sum   timeout    whoami
 chmod      env         logname   pinky      sha512sum   touch      yes
 chown      expand      ls        pr         shred       tr
 chroot     expr        md5sum    printenv   shuf        true
 cksum      factor      mkdir     printf     sleep       truncate
 comm       false       mkfifo    ptx        sort        tsort
 cp         fmt         mknod     pwd        split       tty
 csplit     fold        mktemp    readlink   stat        uname
17 lines
ASSISTANT
Show reasoning

Analyzing Symlink Creation

I'm currently focused on the creation of symbolic links for all coreutils utilities within the /home/peter/result/bin directory, ensuring they are created directly in /home/peter/. I'm considering the most efficient method to iterate through the utility files and create the necessary links. My goal is to streamline this process and avoid any potential errors during symlink generation.

Planning Symlink Placement

I'm now developing a plan to execute the symlink creation. It appears I need to target the /home/peter/ directory, ensuring the links correctly point back to the installed binaries located at /home/peter/result/bin/. I am contemplating which tools, either find with -exec or a simple loop, will provide the best approach.

compile-bench> for file in /home/peter/result/bin/*; do ln -s "$file" "/home/peter/result/$(basename $file)"; done
[empty output]
ASSISTANT
Show reasoning

Evaluating Installation Steps

I've successfully installed the coreutils package to the specified directory. Now, I'm meticulously evaluating the next steps, specifically the creation of symbolic links. I must ensure all utilities are accessible, reflecting a well-organized system.

Confirming Symbolic Links

I've confirmed the creation of symbolic links for several coreutils utilities, such as ls and mkdir, directly under /home/peter/result. This confirms the binaries are now readily accessible. The final step is to verify the functionality of these symlinks before considering the task complete.

compile-bench> ls -l /home/peter/result/ls
lrwxrwxrwx 1 peter peter 25 Sep 16 21:34 /home/peter/result/ls -> /home/peter/result/bin/ls
ASSISTANT
Show reasoning

Assessing Installation Steps

I've successfully extracted, configured, and compiled coreutils. Now, I'm on the cusp of installation. I'm carefully considering the final make install command and double-checking my chosen prefix, ensuring everything lands where I intend, in my result directory.

Verifying Symlink Integrity

I've confirmed ls works. Currently, I'm devising the best method to validate the remaining symlinks. The plan: list all binaries within the /home/peter/result/bin directory and then systematically check for their presence as symlinks in the root result directory. This approach will provide comprehensive verification.

compile-bench> ls /home/peter/result/bin | while read -r utility; do if [ ! -L "/home/peter/result/$utility" ]; then echo "Symlink for $utility does not exist in /home/peter/result/"; exit 1; fi; done && echo "All symlinks created successfully."
All symlinks created successfully.
ASSISTANT
Show reasoning

Examining Coreutils Build

I've just finished the compilation of coreutils, and now I am ready to install it. I will proceed to install it to the prefix I chose: /home/peter/result. Then, I can move on to creating the necessary symlinks.

Wrapping Up the Process

I've successfully installed and verified the coreutils package, including the creation and validation of all necessary symlinks. It's all done now!

Coreutils has been successfully compiled and installed to /home/peter/result. Symlinks for all utilities have been created in /home/peter/result/ pointing to their respective binaries in /home/peter/result/bin.

Task finished successfully, all checks passed!
Checks passed:
sha1sum binary exists
basename exists and --version works
cat exists and --version works
chgrp exists and --version works
chmod exists and --version works
chown exists and --version works
chroot exists and --version works
cksum exists and --version works
comm exists and --version works
cp exists and --version works
csplit exists and --version works
cut exists and --version works
date exists and --version works
dd exists and --version works
df exists and --version works
dir exists and --version works
dircolors exists and --version works
dirname exists and --version works
du exists and --version works
echo exists and --version works
env exists and --version works
expand exists and --version works
expr exists and --version works
factor exists and --version works
false exists (skipping --version check)
fmt exists and --version works
fold exists and --version works
groups exists and --version works
head exists and --version works
hostid exists and --version works
id exists and --version works
install exists and --version works
join exists and --version works
kill exists (skipping --version check)
link exists and --version works
ln exists and --version works
logname exists and --version works
ls exists and --version works
md5sum exists and --version works
mkdir exists and --version works
mkfifo exists and --version works
mknod exists and --version works
mv exists and --version works
nice exists and --version works
nl exists and --version works
nohup exists and --version works
od exists and --version works
paste exists and --version works
pathchk exists and --version works
pinky exists and --version works
pr exists and --version works
printenv exists and --version works
printf exists (skipping --version check)
ptx exists and --version works
pwd exists (skipping --version check)
readlink exists and --version works
rm exists and --version works
rmdir exists and --version works
seq exists and --version works
sha1sum exists and --version works
shred exists and --version works
sleep exists and --version works
sort exists and --version works
split exists and --version works
stat exists and --version works
stty exists and --version works
sum exists and --version works
sync exists and --version works
tac exists and --version works
tail exists and --version works
tee exists and --version works
test exists and --version works
touch exists and --version works
tr exists and --version works
true exists and --version works
tsort exists and --version works
tty exists and --version works
uname exists and --version works
unexpand exists and --version works
uniq exists and --version works
unlink exists and --version works
uptime exists and --version works
users exists and --version works
vdir exists and --version works
wc exists and --version works
who exists and --version works
whoami exists and --version works
yes exists and --version works
sha1sum produced expected hash